adjusted addresses in start.pl

diff --git a/tools/start.pl b/tools/start.pl
index a2f4579416d1e6465261601420a4b73d55c5d6d1..c030acc280ea9d9a6607f07bbfdc11b83724fb7e 100755 (executable)
--- a/tools/start.pl
+++ b/tools/start.pl
@@ -28,17 +28,15 @@ sub run {
   }
 
 
-#trb_register_write(0xf30c,0xa002,0xab);
-#print Dumper trb_register_read(0xf30c,0xa002);
+#trb_register_write(0x8000,0xa002,0xab);
+#print Dumper trb_register_read(0x8000,0xa002);
 
 #exit;
 
 run("trbcmd reset");
 
 #Set addresses
-run(DAQTOOLSPATH."/tools/merge_serial_address.pl ".CONFIGPATH."/network/serials_hub.db ".CONFIGPATH."/network/addresses_hub.db");
-run(DAQTOOLSPATH."/tools/merge_serial_address.pl ".CONFIGPATH."/network/serials_mapsaddon.db ".CONFIGPATH."/network/addresses_mapsaddon.db");
-run(DAQTOOLSPATH."/tools/merge_serial_address.pl ".CONFIGPATH."/network/serials_arbiter.db ".CONFIGPATH."/network/addresses_arbiter.db");
+run(DAQTOOLSPATH."/tools/merge_serial_address.pl ".DAQTOOLSPATH."/base/serials_trb3.db ".CONFIGPATH."/network/addresses_trb3.db");
 
 
 #Set GbE Configuration
@@ -59,16 +57,16 @@ trb_write(0xfffe,0x00c5,0x20ff);   #Timeouts
 #trb_write(0x8c01,0x00c1,0xffff);
 #trb_write(0x8c01,0x00c3,0xffff);
 
-trb_write(0xf30c,0x00c0,0x00e1);   
-trb_write(0xf30c,0x00c1,0x00e1);
-trb_write(0xf30c,0x00c3,0x00ff);   #only slowcontrol for unused FPGA
+trb_write(0x8000,0x00c0,0x00e1);   
+trb_write(0x8000,0x00c1,0x00e1);
+trb_write(0x8000,0x00c3,0x00ff);   #only slowcontrol for unused FPGA
 
 
 #Set Sensor IDs
-#trb_write(0xf30d,0x00c0,0xccc1ccc0);
+#trb_write(0xfe4d,0x00c0,0xccc1ccc0);
 
 #Set JTAG switches
-trb_write(0xf30d,0xb000,0x00000000);
+trb_write(0xfe4d,0xb000,0x00000000);
 
 #Send arbiter start signal
-trb_write(0xf30c,0xa000,0x00000001);
+trb_write(0x8000,0xa000,0x00000001);