-- for whole architecture
attribute HGROUP of trb_net16_gbe_buf : architecture is "GBE_BUF_group";
--- Interface between IPU channel and packet constructor
-component trb_net16_ipu2gbe is
-port(
- CLK : in std_logic;
- RESET : in std_logic;
- --Event information coming from CTS
- CTS_NUMBER_IN : in std_logic_vector (15 downto 0);
- CTS_CODE_IN : in std_logic_vector (7 downto 0);
- CTS_INFORMATION_IN : in std_logic_vector (7 downto 0);
- CTS_READOUT_TYPE_IN : in std_logic_vector (3 downto 0);
- CTS_START_READOUT_IN : in std_logic;
- --Information sent to CTS
- --status data, equipped with DHDR
- CTS_DATA_OUT : out std_logic_vector (31 downto 0);
- CTS_DATAREADY_OUT : out std_logic;
- CTS_READOUT_FINISHED_OUT : out std_logic; --no more data, end transfer, send TRM
- CTS_READ_IN : in std_logic;
- CTS_LENGTH_OUT : out std_logic_vector (15 downto 0);
- CTS_ERROR_PATTERN_OUT : out std_logic_vector (31 downto 0);
- -- Data from Frontends
- FEE_DATA_IN : in std_logic_vector (15 downto 0);
- FEE_DATAREADY_IN : in std_logic;
- FEE_READ_OUT : out std_logic; --must be high when idle, otherwise you will never get a dataready
- FEE_STATUS_BITS_IN : in std_logic_vector (31 downto 0);
- FEE_BUSY_IN : in std_logic;
- -- slow control interface
- START_CONFIG_OUT : out std_logic; -- reconfigure MACs/IPs/ports/packet size
- BANK_SELECT_OUT : out std_logic_vector(3 downto 0); -- configuration page address
- CONFIG_DONE_IN : in std_logic; -- configuration finished
- DATA_GBE_ENABLE_IN : in std_logic; -- IPU data is forwarded to GbE
- DATA_IPU_ENABLE_IN : in std_logic; -- IPU data is forwarded to CTS / TRBnet
- MULTI_EVT_ENABLE_IN : in std_logic; -- enable multi event packets
- MAX_MESSAGE_SIZE_IN : in std_logic_vector(31 downto 0); -- the maximum size of one HadesQueue -- gk 08.04.10
- READOUT_CTR_IN : in std_logic_vector(23 downto 0); -- gk 26.04.10
- READOUT_CTR_VALID_IN : in std_logic; -- gk 26.04.10
- -- PacketConstructor interface
- PC_WR_EN_OUT : out std_logic;
- PC_DATA_OUT : out std_logic_vector (7 downto 0);
- PC_READY_IN : in std_logic;
- PC_SOS_OUT : out std_logic;
- PC_EOD_OUT : out std_logic;
- PC_SUB_SIZE_OUT : out std_logic_vector(31 downto 0);
- PC_TRIG_NR_OUT : out std_logic_vector(31 downto 0);
- PC_PADDING_OUT : out std_logic;
- -- Debug
- BSM_SAVE_OUT : out std_logic_vector(3 downto 0);
- BSM_LOAD_OUT : out std_logic_vector(3 downto 0);
- DBG_CTS_CTR_OUT : out std_logic_vector(2 downto 0);
- DBG_REM_CTR_OUT : out std_logic_vector(3 downto 0);
- DBG_SF_WCNT_OUT : out std_logic_vector(15 downto 0);
- DBG_SF_RCNT_OUT : out std_logic_vector(16 downto 0);
- DBG_SF_DATA_OUT : out std_logic_vector(15 downto 0);
- DBG_SF_RD_EN_OUT : out std_logic;
- DBG_SF_WR_EN_OUT : out std_logic;
- DBG_SF_EMPTY_OUT : out std_logic;
- DBG_SF_AEMPTY_OUT : out std_logic;
- DBG_SF_FULL_OUT : out std_logic;
- DBG_SF_AFULL_OUT : out std_logic;
- DEBUG_OUT : out std_logic_vector(63 downto 0)
-);
-end component;
-
-component ip_configurator is
-port(
- CLK : in std_logic;
- RESET : in std_logic;
- -- configuration interface
- START_CONFIG_IN : in std_logic; -- start configuration run
- BANK_SELECT_IN : in std_logic_vector(3 downto 0); -- selects config bank
- CONFIG_DONE_OUT : out std_logic; -- configuration run ended, new values can be used
- MEM_ADDR_OUT : out std_logic_vector(7 downto 0); -- address for
- MEM_DATA_IN : in std_logic_vector(31 downto 0); -- data from IP memory
- MEM_CLK_OUT : out std_logic; -- clock for BlockRAM
- -- information for IP cores
- DEST_MAC_OUT : out std_logic_vector(47 downto 0); -- destination MAC address
- DEST_IP_OUT : out std_logic_vector(31 downto 0); -- destination IP address
- DEST_UDP_OUT : out std_logic_vector(15 downto 0); -- destination port
- SRC_MAC_OUT : out std_logic_vector(47 downto 0); -- source MAC address
- SRC_IP_OUT : out std_logic_vector(31 downto 0); -- source IP address
- SRC_UDP_OUT : out std_logic_vector(15 downto 0); -- source port
- MTU_OUT : out std_logic_vector(15 downto 0); -- MTU size (max frame size)
- -- Debug
- DEBUG_OUT : out std_logic_vector(31 downto 0)
-);
-end component;
-
--- PacketConstructor for UDP packet
-component trb_net16_gbe_packet_constr is
-port (
- -- ports for user logic
- RESET : in std_logic;
- CLK : in std_logic;
- PC_WR_EN_IN : in std_logic;
- PC_DATA_IN : in std_logic_vector(7 downto 0);
- PC_READY_OUT : out std_logic;
- PC_START_OF_SUB_IN : in std_logic;
- PC_END_OF_DATA_IN : in std_logic;
- -- queue and subevent layer headers
- PC_SUB_SIZE_IN : in std_logic_vector(31 downto 0);
- PC_PADDING_IN : in std_logic; -- gk 29.03.10
- PC_DECODING_IN : in std_logic_vector(31 downto 0);
- PC_EVENT_ID_IN : in std_logic_vector(31 downto 0);
- PC_TRIG_NR_IN : in std_logic_vector(31 downto 0);
- PC_QUEUE_DEC_IN : in std_logic_vector(31 downto 0);
- PC_MAX_FRAME_SIZE_IN : in std_logic_vector(15 downto 0);
- PC_DELAY_IN : in std_logic_vector(31 downto 0); -- gk 28.04.10
- -- NEW PORTS
- FC_WR_EN_OUT : out std_logic;
- FC_DATA_OUT : out std_logic_vector(7 downto 0);
- FC_H_READY_IN : in std_logic;
- FC_READY_IN : in std_logic;
- FC_IP_SIZE_OUT : out std_logic_vector(15 downto 0);
- FC_UDP_SIZE_OUT : out std_logic_vector(15 downto 0);
- FC_IDENT_OUT : out std_logic_vector(15 downto 0);
- FC_FLAGS_OFFSET_OUT : out std_logic_vector(15 downto 0);
- FC_SOD_OUT : out std_logic;
- FC_EOD_OUT : out std_logic;
- -- debug ports
- BSM_CONSTR_OUT : out std_logic_vector(3 downto 0);
- BSM_LOAD_OUT : out std_logic_vector(3 downto 0);
- BSM_SAVE_OUT : out std_logic_vector(3 downto 0);
- DBG_SHF_EMPTY : out std_logic;
- DBG_SHF_FULL : out std_logic;
- DBG_SHF_WR_EN : out std_logic;
- DBG_SHF_RD_EN : out std_logic;
- DBG_SHF_Q : out std_logic_vector(7 downto 0);
- DBG_DF_EMPTY : out std_logic;
- DBG_DF_FULL : out std_logic;
- DBG_DF_WR_EN : out std_logic;
- DBG_DF_RD_EN : out std_logic;
- DBG_DF_Q : out std_logic_vector(7 downto 0);
- DBG_ALL_CTR : out std_logic_vector(4 downto 0);
- DBG_SUB_CTR : out std_logic_vector(4 downto 0);
- DBG_MY_CTR : out std_logic_vector(1 downto 0);
- DBG_BYTES_LOADED : out std_logic_vector(15 downto 0);
- DBG_SIZE_LEFT : out std_logic_vector(31 downto 0);
- DBG_SUB_SIZE_TO_SAVE : out std_logic_vector(31 downto 0);
- DBG_SUB_SIZE_LOADED : out std_logic_vector(31 downto 0);
- DBG_SUB_BYTES_LOADED : out std_logic_vector(31 downto 0);
- DBG_QUEUE_SIZE : out std_logic_vector(31 downto 0);
- DBG_ACT_QUEUE_SIZE : out std_logic_vector(31 downto 0);
- DEBUG_OUT : out std_logic_vector(63 downto 0)
-);
-end component;
-
--- FrameConstructor for IP packets
-component trb_net16_gbe_frame_constr is
-port (
- -- ports for user logic
- CLK : in std_logic;
- RESET : in std_logic;
- --
- WR_EN_IN : in std_logic;
- DATA_IN : in std_logic_vector(7 downto 0);
- START_OF_DATA_IN : in std_logic;
- END_OF_DATA_IN : in std_logic;
- IP_F_SIZE_IN : in std_logic_vector(15 downto 0);
- UDP_P_SIZE_IN : in std_logic_vector(15 downto 0); -- needed for fragmentation
- HEADERS_READY_OUT : out std_logic;
- READY_OUT : out std_logic;
- DEST_MAC_ADDRESS_IN : in std_logic_vector(47 downto 0);
- DEST_IP_ADDRESS_IN : in std_logic_vector(31 downto 0);
- DEST_UDP_PORT_IN : in std_logic_vector(15 downto 0);
- SRC_MAC_ADDRESS_IN : in std_logic_vector(47 downto 0);
- SRC_IP_ADDRESS_IN : in std_logic_vector(31 downto 0);
- SRC_UDP_PORT_IN : in std_logic_vector(15 downto 0);
- FRAME_TYPE_IN : in std_logic_vector(15 downto 0);
- IHL_VERSION_IN : in std_logic_vector(7 downto 0);
- TOS_IN : in std_logic_vector(7 downto 0);
- IDENTIFICATION_IN : in std_logic_vector(15 downto 0);
- FLAGS_OFFSET_IN : in std_logic_vector(15 downto 0);
- TTL_IN : in std_logic_vector(7 downto 0);
- PROTOCOL_IN : in std_logic_vector(7 downto 0);
- -- ports for packetTransmitter
- RD_CLK : in std_logic;
- FT_DATA_OUT : out std_logic_vector(8 downto 0);-- gk 04.05.10
- --FT_EOD_OUT : out std_logic;-- gk 04.05.10
- FT_TX_EMPTY_OUT : out std_logic;
- FT_TX_RD_EN_IN : in std_logic;
- FT_START_OF_PACKET_OUT : out std_logic;
- FT_TX_DONE_IN : in std_logic;
- -- debug ports
- BSM_CONSTR_OUT : out std_logic_vector(7 downto 0);
- BSM_TRANS_OUT : out std_logic_vector(3 downto 0);
- DEBUG_OUT : out std_logic_vector(63 downto 0)
-);
-end component;
-
-component trb_net16_gbe_frame_trans is
-port (
- CLK : in std_logic;
- RESET : in std_logic;
- TX_MAC_CLK : in std_logic;
- TX_EMPTY_IN : in std_logic;
- START_OF_PACKET_IN : in std_logic;
- DATA_ENDFLAG_IN : in std_logic; -- (8) is end flag, rest is only for TSMAC
- -- NEW PORTS
- HADDR_OUT : out std_logic_vector(7 downto 0);
- HDATA_OUT : out std_logic_vector(7 downto 0);
- HCS_OUT : out std_logic;
- HWRITE_OUT : out std_logic;
- HREAD_OUT : out std_logic;
- HREADY_IN : in std_logic;
- HDATA_EN_IN : in std_logic;
- TX_FIFOAVAIL_OUT : out std_logic;
- TX_FIFOEOF_OUT : out std_logic;
- TX_FIFOEMPTY_OUT : out std_logic;
- TX_DONE_IN : in std_logic;
- -- Debug
- BSM_INIT_OUT : out std_logic_vector(3 downto 0);
- BSM_MAC_OUT : out std_logic_vector(3 downto 0);
- BSM_TRANS_OUT : out std_logic_vector(3 downto 0);
- DBG_RD_DONE_OUT : out std_logic;
- DBG_INIT_DONE_OUT : out std_logic;
- DBG_ENABLED_OUT : out std_logic;
- DEBUG_OUT : out std_logic_vector(63 downto 0)
-);
-end component;
-
component tsmac3
port(
--------------- clock and reset port declarations ------------------
);
end component;
-component trb_net16_med_ecp_sfp_gbe_8b is
--- gk 28.04.10
-generic (
- USE_125MHZ_EXTCLK : integer range 0 to 1 := 1
-);
-port(
- RESET : in std_logic;
- GSR_N : in std_logic;
- CLK_125_OUT : out std_logic;
- CLK_RX_OUT : out std_logic;
- CLK_TX_OUT : out std_logic;
- CLK_125_TX_IN : in std_logic; -- gk 28.04.10 used when intclk
- CLK_125_RX_IN : in std_logic; -- gk 28.04.10 used when intclk
- --SGMII connection to frame transmitter (tsmac)
- FT_TX_CLK_EN_OUT : out std_logic;
- FT_RX_CLK_EN_OUT : out std_logic;
- FT_COL_OUT : out std_logic;
- FT_CRS_OUT : out std_logic;
- FT_TXD_IN : in std_logic_vector(7 downto 0);
- FT_TX_EN_IN : in std_logic;
- FT_TX_ER_IN : in std_logic;
- --SFP Connection
- SD_RXD_P_IN : in std_logic;
- SD_RXD_N_IN : in std_logic;
- SD_TXD_P_OUT : out std_logic;
- SD_TXD_N_OUT : out std_logic;
- SD_REFCLK_P_IN : in std_logic;
- SD_REFCLK_N_IN : in std_logic;
- SD_PRSNT_N_IN : in std_logic; -- SFP Present ('0' = SFP in place, '1' = no SFP mounted)
- SD_LOS_IN : in std_logic; -- SFP Loss Of Signal ('0' = OK, '1' = no signal)
- SD_TXDIS_OUT : out std_logic; -- SFP disable
- -- Autonegotiation stuff
- MR_RESET_IN : in std_logic;
- MR_MODE_IN : in std_logic;
- MR_ADV_ABILITY_IN : in std_logic_vector(15 downto 0);
- MR_AN_LP_ABILITY_OUT : out std_logic_vector(15 downto 0);
- MR_AN_PAGE_RX_OUT : out std_logic;
- MR_AN_COMPLETE_OUT : out std_logic;
- MR_AN_ENABLE_IN : in std_logic;
- MR_RESTART_AN_IN : in std_logic;
- -- Status and control port
- STAT_OP : out std_logic_vector (15 downto 0);
- CTRL_OP : in std_logic_vector (15 downto 0);
- STAT_DEBUG : out std_logic_vector (63 downto 0);
- CTRL_DEBUG : in std_logic_vector (63 downto 0)
-);
-end component;
-
component slv_mac_memory is
port(
CLK : in std_logic;
);
end component;
-component gbe_setup is
-port(
- CLK : in std_logic;
- RESET : in std_logic;
-
- -- interface to regio bus
- BUS_ADDR_IN : in std_logic_vector(7 downto 0);
- BUS_DATA_IN : in std_logic_vector(31 downto 0);
- BUS_DATA_OUT : out std_logic_vector(31 downto 0); -- gk 26.04.10
- BUS_WRITE_EN_IN : in std_logic; -- gk 26.04.10
- BUS_READ_EN_IN : in std_logic; -- gk 26.04.10
- BUS_ACK_OUT : out std_logic; -- gk 26.04.10
-
- GBE_TRIG_NR_IN : in std_logic_vector(31 downto 0);
-
- -- output to gbe_buf
- GBE_SUBEVENT_ID_OUT : out std_logic_vector(31 downto 0);
- GBE_SUBEVENT_DEC_OUT : out std_logic_vector(31 downto 0);
- GBE_QUEUE_DEC_OUT : out std_logic_vector(31 downto 0);
- GBE_MAX_PACKET_OUT : out std_logic_vector(31 downto 0);
- GBE_MAX_FRAME_OUT : out std_logic_vector(15 downto 0);
- GBE_USE_GBE_OUT : out std_logic;
- GBE_USE_TRBNET_OUT : out std_logic;
- GBE_USE_MULTIEVENTS_OUT : out std_logic;
- GBE_READOUT_CTR_OUT : out std_logic_vector(23 downto 0); -- gk 26.04.10
- GBE_READOUT_CTR_VALID_OUT : out std_logic; -- gk 26.04.10
- GBE_DELAY_OUT : out std_logic_vector(31 downto 0);
- -- gk 01.06.10
- DBG_IPU2GBE1_IN : in std_logic_vector(31 downto 0);
- DBG_IPU2GBE2_IN : in std_logic_vector(31 downto 0);
- DBG_PC1_IN : in std_logic_vector(31 downto 0);
- DBG_PC2_IN : in std_logic_vector(31 downto 0);
- DBG_FC1_IN : in std_logic_vector(31 downto 0);
- DBG_FC2_IN : in std_logic_vector(31 downto 0);
- DBG_FT1_IN : in std_logic_vector(31 downto 0);
- DBG_FT2_IN : in std_logic_vector(31 downto 0)
-);
-end component;
-
signal ig_bsm_save : std_logic_vector(3 downto 0);
signal ig_bsm_load : std_logic_vector(3 downto 0);
signal ig_cts_ctr : std_logic_vector(2 downto 0);
DBG_RD_DONE_OUT => open,
DBG_INIT_DONE_OUT => open,
DBG_ENABLED_OUT => open,
- DEBUG_OUT(31 downto 0) => open,
- DEBUG_OUT(63 downto 32) => open
+ DEBUG_OUT => open
+ --DEBUG_OUT(31 downto 0) => open,
+ --DEBUG_OUT(63 downto 32) => open
);
-- in case of real hardware, we use the IP cores for MAC and PHY, and also put a SerDes in
jspc29 / trbnet.git / commitdiff