-library ieee;
-use ieee.std_logic_1164.all;
-use ieee.numeric_std.all;
-
-library work;
-use work.trb_net_std.all;
-use work.trb_net_components.all;
-use work.trb3_components.all;
-use work.version.all;
-
-use work.cbmnet_interface_pkg.all;
-use work.cbmnet_phy_pkg.all;
-
-
-entity trb3_periph_cbmnet is
- generic (
- CBM_FEE_MODE : integer := CBM_FEE_MODE_C; -- in FEE mode, logic will run on recovered clock and (for now) listen only to data received
- -- in Master mode, logic will run on internal clock and regularly send dlms
- INCLUDE_TRBNET : integer := INCLUDE_TRBNET_C
- );
- port(
- --Clocks
- CLK_GPLL_LEFT : in std_logic; --Clock Manager 1/(2468), 125 MHz
- CLK_GPLL_RIGHT : in std_logic; --Clock Manager 2/(2468), 200 MHz <-- MAIN CLOCK for FPGA
- CLK_PCLK_LEFT : in std_logic; --Clock Fan-out, 200/400 MHz <-- For TDC. Same oscillator as GPLL right!
- CLK_PCLK_RIGHT : in std_logic; --Clock Fan-out, 200/400 MHz <-- For TDC. Same oscillator as GPLL right!
-
- --Trigger
- TRIGGER_LEFT : in std_logic; --left side trigger input from fan-out
- TRIGGER_RIGHT : in std_logic; --right side trigger input from fan-out
-
- --Serdes
- CLK_SERDES_INT_LEFT : in std_logic; --Clock Manager 1/(1357), off, 125 MHz possible
- CLK_SERDES_INT_RIGHT : in std_logic; --Clock Manager 2/(1357), 200 MHz, only in case of problems
- SERDES_INT_TX : out std_logic_vector(3 downto 0);
- SERDES_INT_RX : in std_logic_vector(3 downto 0);
- SERDES_ADDON_TX : out std_logic_vector(11 downto 0);
- SERDES_ADDON_RX : in std_logic_vector(11 downto 0);
-
- --Inter-FPGA Communication
- FPGA5_COMM : inout std_logic_vector(11 downto 0);
- --Bit 0/1 input, serial link RX active
- --Bit 2/3 output, serial link TX active
- --others yet undefined
- --Connection to AddOn
- LED_LINKOK : out std_logic_vector(6 downto 1);
- LED_RX : out std_logic_vector(6 downto 1);
- LED_TX : out std_logic_vector(6 downto 1);
-
- SFP_MOD0 : in std_logic_vector(6 downto 1);
- SFP_TXDIS : out std_logic_vector(6 downto 1);
- SFP_LOS : in std_logic_vector(6 downto 1);
- SFP_MOD1 : out std_logic_vector(6 downto 1);
- SFP_MOD2 : inout std_logic_vector(6 downto 1);
-
- SFP_RATESEL: out std_logic_vector(6 downto 1);
- SFP_TXFAULT: in std_logic_vector(6 downto 1);
-
- --Flash ROM & Reboot
- FLASH_CLK : out std_logic;
- FLASH_CS : out std_logic;
- FLASH_DIN : out std_logic;
- FLASH_DOUT : in std_logic;
- PROGRAMN : out std_logic; --reboot FPGA
-
- --Misc
- TEMPSENS : inout std_logic; --Temperature Sensor
- CODE_LINE : in std_logic_vector(1 downto 0);
- LED_GREEN : out std_logic;
- LED_ORANGE : out std_logic;
- LED_RED : out std_logic;
- LED_YELLOW : out std_logic;
- SUPPL : in std_logic; --terminated diff pair, PCLK, Pads
-
- --Test Connectors
- TEST_LINE : out std_logic_vector(15 downto 0);
- --TEST_LVDS_LINE : out std_logic_vector(1 downto 0);
-
- -- PCS Core TODO: Suppose this is necessary only for simulation
- SD_RXD_N_IN : in std_logic;
- SD_RXD_P_IN : in std_logic;
- SD_TXD_N_OUT : out std_logic;
- SD_TXD_P_OUT : out std_logic
- );
-
- attribute syn_useioff : boolean;
- --no IO-FF for LEDs relaxes timing constraints
- attribute syn_useioff of LED_GREEN : signal is false;
- attribute syn_useioff of LED_ORANGE : signal is false;
- attribute syn_useioff of LED_RED : signal is false;
- attribute syn_useioff of LED_YELLOW : signal is false;
- attribute syn_useioff of TEMPSENS : signal is false;
- attribute syn_useioff of PROGRAMN : signal is false;
- attribute syn_useioff of CODE_LINE : signal is false;
- attribute syn_useioff of TRIGGER_LEFT : signal is false;
- attribute syn_useioff of TRIGGER_RIGHT : signal is false;
- attribute syn_useioff of LED_LINKOK : signal is false;
- attribute syn_useioff of LED_RX : signal is false;
- attribute syn_useioff of LED_TX : signal is false;
-
- --important signals _with_ IO-FF
- attribute syn_useioff of FLASH_CLK : signal is true;
- attribute syn_useioff of FLASH_CS : signal is true;
- attribute syn_useioff of FLASH_DIN : signal is true;
- attribute syn_useioff of FLASH_DOUT : signal is true;
- attribute syn_useioff of FPGA5_COMM : signal is true;
- attribute syn_useioff of TEST_LINE : signal is true;
-
- attribute nopad : string;
- attribute nopad of SD_RXD_N_IN, SD_RXD_P_IN, SD_TXD_N_OUT, SD_TXD_P_OUT : signal is "true";
-
- attribute syn_keep : boolean;
- attribute syn_keep of CLK_GPLL_LEFT, CLK_GPLL_RIGHT, CLK_PCLK_LEFT, CLK_PCLK_RIGHT, TRIGGER_LEFT, TRIGGER_RIGHT : signal is true;
- attribute syn_preserve : boolean;
-
-end entity;
-
-architecture trb3_periph_arch of trb3_periph_cbmnet is
- --Constants
- constant REGIO_NUM_STAT_REGS : integer := 2;
- constant REGIO_NUM_CTRL_REGS : integer := 2;
-
- --Clock / Reset
- signal clk_125_i : std_logic; -- clock reference for CBMNet serdes
- signal clk_100_i : std_logic; --clock for main logic, 100 MHz, via Clock Manager and internal PLL
- signal clk_200_i : std_logic; --clock for logic at 200 MHz, via Clock Manager and bypassed PLL
- signal pll_lock : std_logic; --Internal PLL locked. E.g. used to reset all internal logic.
- signal pll_lock1, pll_lock2 : std_logic;
- signal clear_i : std_logic;
- signal reset_i : std_logic;
- signal GSR_N : std_logic;
-
- attribute syn_keep of GSR_N : signal is true;
- attribute syn_preserve of GSR_N : signal is true;
-
- --Media Interface
- signal med_stat_op : std_logic_vector (1*16-1 downto 0) := (others => '0');
- signal med_ctrl_op : std_logic_vector (1*16-1 downto 0);
- signal med_stat_debug : std_logic_vector (1*64-1 downto 0);
- signal med_ctrl_debug : std_logic_vector (1*64-1 downto 0);
- signal med_data_out : std_logic_vector (1*16-1 downto 0);
- signal med_packet_num_out : std_logic_vector (1*3-1 downto 0);
- signal med_dataready_out : std_logic;
- signal med_read_out : std_logic;
- signal med_data_in : std_logic_vector (1*16-1 downto 0);
- signal med_packet_num_in : std_logic_vector (1*3-1 downto 0);
- signal med_dataready_in : std_logic;
- signal med_read_in : std_logic;
-
- --LVL1 channel
- signal timing_trg_received_i : std_logic;
- signal trg_data_valid_i : std_logic;
- signal trg_timing_valid_i : std_logic;
- signal trg_notiming_valid_i : std_logic;
- signal trg_invalid_i : std_logic;
- signal trg_type_i : std_logic_vector(3 downto 0);
- signal trg_number_i : std_logic_vector(15 downto 0);
- signal trg_code_i : std_logic_vector(7 downto 0);
- signal trg_information_i : std_logic_vector(23 downto 0);
- signal trg_int_number_i : std_logic_vector(15 downto 0);
- signal trg_multiple_trg_i : std_logic;
- signal trg_timeout_detected_i: std_logic;
- signal trg_spurious_trg_i : std_logic;
- signal trg_missing_tmg_trg_i : std_logic;
- signal trg_spike_detected_i : std_logic;
-
- --Data channel
- signal fee_trg_release_i : std_logic;
- signal fee_trg_statusbits_i : std_logic_vector(31 downto 0);
- signal fee_data_i : std_logic_vector(31 downto 0);
- signal fee_data_write_i : std_logic;
- signal fee_data_finished_i : std_logic;
- signal fee_almost_full_i : std_logic;
-
- --Slow Control channel
- signal common_stat_reg : std_logic_vector(std_COMSTATREG*32-1 downto 0);
- signal common_ctrl_reg : std_logic_vector(std_COMCTRLREG*32-1 downto 0);
- signal stat_reg : std_logic_vector(32*2**REGIO_NUM_STAT_REGS-1 downto 0);
- signal ctrl_reg : std_logic_vector(32*2**REGIO_NUM_CTRL_REGS-1 downto 0);
- signal common_stat_reg_strobe : std_logic_vector(std_COMSTATREG-1 downto 0);
- signal common_ctrl_reg_strobe : std_logic_vector(std_COMCTRLREG-1 downto 0);
- signal stat_reg_strobe : std_logic_vector(2**REGIO_NUM_STAT_REGS-1 downto 0);
- signal ctrl_reg_strobe : std_logic_vector(2**REGIO_NUM_CTRL_REGS-1 downto 0);
-
- --RegIO
- signal my_address : std_logic_vector (15 downto 0);
- signal regio_addr_out : std_logic_vector (15 downto 0);
- signal regio_read_enable_out : std_logic;
- signal regio_write_enable_out : std_logic;
- signal regio_data_out : std_logic_vector (31 downto 0);
- signal regio_data_in : std_logic_vector (31 downto 0);
- signal regio_dataready_in : std_logic;
- signal regio_no_more_data_in : std_logic;
- signal regio_write_ack_in : std_logic;
- signal regio_unknown_addr_in : std_logic;
- signal regio_timeout_out : std_logic;
-
- --Timer
- signal global_time : std_logic_vector(31 downto 0);
- signal local_time : std_logic_vector(7 downto 0);
- signal time_since_last_trg : std_logic_vector(31 downto 0);
- signal timer_ticks : std_logic_vector(1 downto 0);
-
- --Flash
- signal spictrl_read_en : std_logic;
- signal spictrl_write_en : std_logic;
- signal spictrl_data_in : std_logic_vector(31 downto 0);
- signal spictrl_addr : std_logic;
- signal spictrl_data_out : std_logic_vector(31 downto 0);
- signal spictrl_ack : std_logic;
- signal spictrl_busy : std_logic;
- signal spimem_read_en : std_logic;
- signal spimem_write_en : std_logic;
- signal spimem_data_in : std_logic_vector(31 downto 0);
- signal spimem_addr : std_logic_vector(5 downto 0);
- signal spimem_data_out : std_logic_vector(31 downto 0);
- signal spimem_ack : std_logic;
-
- signal trb_trigger : std_logic;
- signal sync_dlm_sense : std_logic;
- signal sync_pulser : std_logic;
-
-
- signal spi_bram_addr : std_logic_vector(7 downto 0);
- signal spi_bram_wr_d : std_logic_vector(7 downto 0);
- signal spi_bram_rd_d : std_logic_vector(7 downto 0);
- signal spi_bram_we : std_logic;
-
- --FPGA Test
- signal time_counter : unsigned(31 downto 0);
-
- -- CBMNet signals
-
-
- signal hub_cts_number : std_logic_vector(15 downto 0);
- signal hub_cts_code : std_logic_vector(7 downto 0);
- signal hub_cts_information : std_logic_vector(7 downto 0);
- signal hub_cts_start_readout : std_logic;
- signal hub_cts_readout_type : std_logic_vector(3 downto 0);
- signal hub_cts_readout_finished : std_logic;
- signal hub_cts_status_bits : std_logic_vector(31 downto 0);
- signal hub_fee_data : std_logic_vector(15 downto 0);
- signal hub_fee_dataready : std_logic;
- signal hub_fee_read : std_logic;
- signal hub_fee_status_bits : std_logic_vector(31 downto 0);
- signal hub_fee_busy : std_logic;
-
- signal gbe_cts_number : std_logic_vector(15 downto 0);
- signal gbe_cts_code : std_logic_vector(7 downto 0);
- signal gbe_cts_information : std_logic_vector(7 downto 0);
- signal gbe_cts_start_readout : std_logic;
- signal gbe_cts_readout_type : std_logic_vector(3 downto 0);
- signal gbe_cts_readout_finished : std_logic;
- signal gbe_cts_status_bits : std_logic_vector(31 downto 0);
- signal gbe_fee_data : std_logic_vector(15 downto 0);
- signal gbe_fee_dataready : std_logic;
- signal gbe_fee_read : std_logic;
- signal gbe_fee_status_bits : std_logic_vector(31 downto 0);
- signal gbe_fee_busy : std_logic;
-
- signal do_reboot_i : std_logic;
-
- signal cbm_clk_i : std_logic;
- signal cbm_reset_i : std_logic;
- signal cbm_link_active : std_logic; -- link is active and can send and receive data
- signal etm_trigger_i : std_logic;
- signal cbm_sync_dlm_sensed_i : std_logic;
- signal cbm_sync_pulser_i : std_logic;
- signal cbm_sync_timing_trigger_i : std_logic;
-
- signal cbm_regio_addr_i : std_logic_vector(15 downto 0);
- signal cbm_regio_status_data_i : std_logic_vector(31 downto 0);
- signal cbm_regio_read_enable_i : std_logic;
- signal cbm_regio_write_enable_i : std_logic;
- signal cbm_regio_timeout_i : std_logic;
- signal cbm_regio_control_data_i : std_logic_vector(31 downto 0);
- signal cbm_regio_dataready_i : std_logic;
- signal cbm_regio_write_ack_i : std_logic;
- signal cbm_regio_no_more_data_i : std_logic;
- signal cbm_regio_unknown_addr_i : std_logic;
-
-
- signal cbm_pgen_addr_i : std_logic_vector(15 downto 0);
- signal cbm_pgen_status_data_i : std_logic_vector(31 downto 0);
- signal cbm_pgen_read_enable_i : std_logic;
- signal cbm_pgen_write_enable_i : std_logic;
- signal cbm_pgen_timeout_i : std_logic;
- signal cbm_pgen_control_data_i : std_logic_vector(31 downto 0);
- signal cbm_pgen_dataready_i : std_logic;
- signal cbm_pgen_write_ack_i : std_logic;
- signal cbm_pgen_no_more_data_i : std_logic;
- signal cbm_pgen_unknown_addr_i : std_logic;
-
-begin
- clk_125_i <= CLK_GPLL_LEFT;
- assert(INCLUDE_TRBNET = c_YES);
-
- THE_CBM_BRIDGE: cbmnet_bridge
- port map (
- -- clock and reset
- CLK125_IN => clk_125_i, -- in std_logic;
- ASYNC_RESET_IN => clear_i,
- TRB_CLK_IN => clk_100_i, -- in std_logic;
- TRB_RESET_IN => reset_i, -- in std_logic;
-
- CBM_CLK_OUT => cbm_clk_i, -- out std_logic;
- CBM_RESET_OUT=> cbm_reset_i, -- out std_logic;
-
- -- Media Interface
- SD_RXD_P_IN => SD_RXD_P_IN,
- SD_RXD_N_IN => SD_RXD_N_IN,
- SD_TXD_P_OUT => SD_TXD_P_OUT,
- SD_TXD_N_OUT => SD_TXD_N_OUT,
-
- SD_PRSNT_N_IN => SFP_MOD0(1),
- SD_LOS_IN => SFP_LOS(1),
- SD_TXDIS_OUT => SFP_TXDIS(1),
-
- LED_RX_OUT => LED_RX(1),
- LED_TX_OUT => LED_TX(1),
- LED_OK_OUT => LED_LINKOK(1),
-
- -- Status and strobes
- CBM_LINK_ACTIVE_OUT => cbm_link_active,
- CBM_DLM_OUT => cbm_sync_dlm_sensed_i, -- out std_logic;
- CBM_TIMING_TRIGGER_OUT => cbm_sync_timing_trigger_i, -- out std_logic;
- CBM_SYNC_PULSER_OUT => cbm_sync_pulser_i, -- out std_logic;
-
- -- TRBNet Terminal
- TRB_TRIGGER_OUT => trb_trigger, -- out std_logic;
-
- --data output for read-out
- TRB_TRIGGER_IN => timing_trg_received_i, -- in std_logic;
-
- TRB_RDO_VALID_DATA_TRG_IN => trg_data_valid_i,
- TRB_RDO_VALID_NO_TIMING_IN => trg_notiming_valid_i,
-
- TRB_RDO_DATA_OUT => fee_data_i, -- out std_logic_vector(31 downto 0);
- TRB_RDO_WRITE_OUT => fee_data_write_i, -- out std_logic;
- TRB_RDO_STATUSBIT_OUT => fee_trg_statusbits_i, -- out std_logic_vector(31 downto 0);
- TRB_RDO_FINISHED_OUT => fee_data_finished_i, -- out std_logic;
-
- HUB_CTS_NUMBER_IN => hub_cts_number, -- in std_logic_vector (15 downto 0);
- HUB_CTS_CODE_IN => hub_cts_code, -- in std_logic_vector (7 downto 0);
- HUB_CTS_INFORMATION_IN => hub_cts_information, -- in std_logic_vector (7 downto 0);
- HUB_CTS_READOUT_TYPE_IN => hub_cts_readout_type, -- in std_logic_vector (3 downto 0);
- HUB_CTS_START_READOUT_IN => hub_cts_start_readout, -- in std_logic;
- HUB_CTS_READOUT_FINISHED_OUT => hub_cts_readout_finished, -- out std_logic; --no more data, end transfer, send TRM
- HUB_CTS_STATUS_BITS_OUT => hub_cts_status_bits, -- out std_logic_vector (31 downto 0);
- HUB_FEE_DATA_IN => hub_fee_data, -- in std_logic_vector (15 downto 0);
- HUB_FEE_DATAREADY_IN => hub_fee_dataready, -- in std_logic;
- HUB_FEE_READ_OUT => hub_fee_read, -- out std_logic; --must be high when idle, otherwise you will never get a dataready
- HUB_FEE_STATUS_BITS_IN => hub_fee_status_bits, -- in std_logic_vector (31 downto 0);
- HUB_FEE_BUSY_IN => hub_fee_busy, -- in std_logic;
-
- -- connect to GbE
- GBE_CTS_NUMBER_OUT => gbe_cts_number, -- out std_logic_vector (15 downto 0);
- GBE_CTS_CODE_OUT => gbe_cts_code, -- out std_logic_vector (7 downto 0);
- GBE_CTS_INFORMATION_OUT => gbe_cts_information, -- out std_logic_vector (7 downto 0);
- GBE_CTS_READOUT_TYPE_OUT => gbe_cts_readout_type, -- out std_logic_vector (3 downto 0);
- GBE_CTS_START_READOUT_OUT => gbe_cts_start_readout, -- out std_logic;
- GBE_CTS_READOUT_FINISHED_IN => gbe_cts_readout_finished, -- in std_logic; --no more data, end transfer, send TRM
- GBE_CTS_STATUS_BITS_IN => gbe_cts_status_bits, -- in std_logic_vector (31 downto 0);
- GBE_FEE_DATA_OUT => gbe_fee_data, -- out std_logic_vector (15 downto 0);
- GBE_FEE_DATAREADY_OUT => gbe_fee_dataready, -- out std_logic;
- GBE_FEE_READ_IN => gbe_fee_read, -- in std_logic; --must be high when idle, otherwise you will never get a dataready
- GBE_FEE_STATUS_BITS_OUT => gbe_fee_status_bits, -- out std_logic_vector (31 downto 0);
- GBE_FEE_BUSY_OUT => gbe_fee_busy, -- out std_logic;
-
- -- reg io
- REGIO_ADDR_IN => cbm_regio_addr_i, -- in std_logic_vector(15 downto 0);
- REGIO_DATA_IN => cbm_regio_control_data_i, -- in std_logic_vector(31 downto 0);
- REGIO_TIMEOUT_IN => cbm_regio_timeout_i, -- in std_logic;
- REGIO_READ_ENABLE_IN => cbm_regio_read_enable_i, -- in std_logic;
- REGIO_WRITE_ENABLE_IN => cbm_regio_write_enable_i, -- in std_logic;
- REGIO_DATA_OUT => cbm_regio_status_data_i, -- out std_logic_vector(31 downto 0);
- REGIO_DATAREADY_OUT => cbm_regio_dataready_i, -- out std_logic;
- REGIO_WRITE_ACK_OUT => cbm_regio_write_ack_i, -- out std_logic;
- REGIO_NO_MORE_DATA_OUT => cbm_regio_no_more_data_i, -- out std_logic;
- REGIO_UNKNOWN_ADDR_OUT => cbm_regio_unknown_addr_i -- out std_logic;
- );
-
- fee_trg_release_i <= fee_data_finished_i;
-
- SFP_RATESEL <= (others => '0');
-
- THE_RDO_PGEN: trbnet_rdo_pattern_generator
- port map (
- CLK_IN => clk_100_i,
- RESET_IN => reset_i,
-
- HUB_CTS_NUMBER_OUT => hub_cts_number,
- HUB_CTS_CODE_OUT => hub_cts_code,
- HUB_CTS_OUTFORMATION_OUT => hub_cts_information,
- HUB_CTS_READOUT_TYPE_OUT => hub_cts_readout_type,
- HUB_CTS_START_READOUT_OUT => hub_cts_start_readout,
- HUB_CTS_READOUT_FINISHED_IN => hub_cts_readout_finished,
- HUB_CTS_STATUS_BITS_IN => hub_cts_status_bits,
- HUB_FEE_DATA_OUT => hub_fee_data,
- HUB_FEE_DATAREADY_OUT => hub_fee_dataready,
- HUB_FEE_READ_IN => hub_fee_read,
- HUB_FEE_STATUS_BITS_OUT => hub_fee_status_bits,
- HUB_FEE_BUSY_OUT => hub_fee_busy,
-
- REGIO_READ_ENABLE_IN => cbm_pgen_read_enable_i,
- REGIO_WRITE_ENABLE_IN => cbm_pgen_write_enable_i,
- REGIO_DATA_IN => cbm_pgen_control_data_i,
- REGIO_ADDR_IN => cbm_pgen_addr_i,
- REGIO_TIMEOUT_IN => cbm_pgen_timeout_i,
- REGIO_DATA_OUT => cbm_pgen_status_data_i,
- REGIO_DATAREADY_OUT => cbm_pgen_dataready_i,
- REGIO_WRITE_ACK_OUT => cbm_pgen_write_ack_i,
- REGIO_NO_MORE_DATA_OUT => cbm_pgen_no_more_data_i,
- REGIO_UNKNOWN_ADDR_OUT => cbm_pgen_unknown_addr_i
- );
- gbe_fee_read <= '1';
- gbe_cts_status_bits <= x"beafc0de";
-
----------------------------------------------------------------------------
--- Reset Generation
----------------------------------------------------------------------------
- GSR_N <= pll_lock;
-
- THE_RESET_HANDLER : trb_net_reset_handler
- generic map(
- RESET_DELAY => x"FEEE"
- )
- port map(
- CLEAR_IN => '0', -- reset input (high active, async)
- CLEAR_N_IN => '1', -- reset input (low active, async)
- CLK_IN => clk_200_i, -- raw master clock, NOT from PLL/DLL!
- SYSCLK_IN => clk_100_i, -- PLL/DLL remastered clock
- PLL_LOCKED_IN => pll_lock, -- master PLL lock signal (async)
- RESET_IN => '0', -- general reset signal (SYSCLK)
- TRB_RESET_IN => med_stat_op(13), -- TRBnet reset signal (SYSCLK)
- CLEAR_OUT => clear_i, -- async reset out, USE WITH CARE!
- RESET_OUT => reset_i, -- synchronous reset out (SYSCLK)
- DEBUG_OUT => open
- );
-
-
----------------------------------------------------------------------------
--- Clock Handling
----------------------------------------------------------------------------
-
- THE_MAIN_PLL : pll_in200_out100
- port map(
- CLK => CLK_GPLL_RIGHT,
- CLKOP => clk_100_i,
- CLKOK => clk_200_i,
- CLKOS => open,
- LOCK => pll_lock1
- );
-
- pll_lock <= pll_lock1; -- and pll_lock2;
-
--- GEN_TRBNET: if INCLUDE_TRBNET = c_YES generate
----------------------------------------------------------------------------
--- The TrbNet media interface (to other FPGA)
----------------------------------------------------------------------------
- THE_MEDIA_UPLINK : trb_net16_med_ecp3_sfp
- generic map(
- SERDES_NUM => 1, --number of serdes in quad
- EXT_CLOCK => c_NO, --use internal clock
- USE_200_MHZ => c_YES, --run on 200 MHz clock
- USE_125_MHZ => c_NO,
- USE_CTC => c_NO
- )
- port map(
- CLK => clk_200_i,
- SYSCLK => clk_100_i,
- RESET => reset_i,
- CLEAR => clear_i,
- CLK_EN => '1',
- --Internal Connection
- MED_DATA_IN => med_data_out,
- MED_PACKET_NUM_IN => med_packet_num_out,
- MED_DATAREADY_IN => med_dataready_out,
- MED_READ_OUT => med_read_in,
- MED_DATA_OUT => med_data_in,
- MED_PACKET_NUM_OUT => med_packet_num_in,
- MED_DATAREADY_OUT => med_dataready_in,
- MED_READ_IN => med_read_out,
- REFCLK2CORE_OUT => open,
- --SFP Connection
- SD_RXD_P_IN => SERDES_INT_RX(2),
- SD_RXD_N_IN => SERDES_INT_RX(3),
- SD_TXD_P_OUT => SERDES_INT_TX(2),
- SD_TXD_N_OUT => SERDES_INT_TX(3),
- SD_REFCLK_P_IN => open,
- SD_REFCLK_N_IN => open,
- SD_PRSNT_N_IN => FPGA5_COMM(0),
- SD_LOS_IN => FPGA5_COMM(0),
- SD_TXDIS_OUT => FPGA5_COMM(2),
- -- Status and control port
- STAT_OP => med_stat_op,
- CTRL_OP => med_ctrl_op,
- STAT_DEBUG => med_stat_debug,
- CTRL_DEBUG => (others => '0'),
-
- sci_ack => open,
- clk_rx_full_out => open,
- clk_rx_half_out => open
- );
-
----------------------------------------------------------------------------
--- Endpoint
----------------------------------------------------------------------------
- THE_ENDPOINT : trb_net16_endpoint_hades_full_handler
- generic map(
- REGIO_NUM_STAT_REGS => REGIO_NUM_STAT_REGS, --4, --16 stat reg
- REGIO_NUM_CTRL_REGS => REGIO_NUM_CTRL_REGS, --3, --8 cotrol reg
- ADDRESS_MASK => x"FFFF",
- BROADCAST_BITMASK => x"FF",
- BROADCAST_SPECIAL_ADDR => x"45",
- REGIO_COMPILE_TIME => std_logic_vector(to_unsigned(VERSION_NUMBER_TIME, 32)),
- REGIO_HARDWARE_VERSION => x"91000001",
- REGIO_INIT_ADDRESS => x"f301",
- REGIO_USE_VAR_ENDPOINT_ID => c_YES,
- CLOCK_FREQUENCY => 100,
- TIMING_TRIGGER_RAW => c_YES,
- --Configure data handler
- DATA_INTERFACE_NUMBER => 1,
- DATA_BUFFER_DEPTH => 13, --13
- DATA_BUFFER_WIDTH => 32,
- DATA_BUFFER_FULL_THRESH => 2**13-800, --2**13-1024
- TRG_RELEASE_AFTER_DATA => c_YES,
- HEADER_BUFFER_DEPTH => 9,
- HEADER_BUFFER_FULL_THRESH => 2**9-16
- )
- port map(
- CLK => clk_100_i,
- RESET => reset_i,
- CLK_EN => '1',
- MED_DATAREADY_OUT => med_dataready_out, -- open, --
- MED_DATA_OUT => med_data_out, -- open, --
- MED_PACKET_NUM_OUT => med_packet_num_out, -- open, --
- MED_READ_IN => med_read_in,
- MED_DATAREADY_IN => med_dataready_in,
- MED_DATA_IN => med_data_in,
- MED_PACKET_NUM_IN => med_packet_num_in,
- MED_READ_OUT => med_read_out, -- open, --
- MED_STAT_OP_IN => med_stat_op,
- MED_CTRL_OP_OUT => med_ctrl_op,
-
- --Timing trigger in
- TRG_TIMING_TRG_RECEIVED_IN => timing_trg_received_i,
- --LVL1 trigger to FEE
- LVL1_TRG_DATA_VALID_OUT => trg_data_valid_i,
- LVL1_VALID_TIMING_TRG_OUT => trg_timing_valid_i,
- LVL1_VALID_NOTIMING_TRG_OUT => trg_notiming_valid_i,
- LVL1_INVALID_TRG_OUT => trg_invalid_i,
-
- LVL1_TRG_TYPE_OUT => trg_type_i,
- LVL1_TRG_NUMBER_OUT => trg_number_i,
- LVL1_TRG_CODE_OUT => trg_code_i,
- LVL1_TRG_INFORMATION_OUT => trg_information_i,
- LVL1_INT_TRG_NUMBER_OUT => trg_int_number_i,
-
- --Information about trigger handler errors
- TRG_MULTIPLE_TRG_OUT => trg_multiple_trg_i,
- TRG_TIMEOUT_DETECTED_OUT => trg_timeout_detected_i,
- TRG_SPURIOUS_TRG_OUT => trg_spurious_trg_i,
- TRG_MISSING_TMG_TRG_OUT => trg_missing_tmg_trg_i,
- TRG_SPIKE_DETECTED_OUT => trg_spike_detected_i,
-
- --Response from FEE
- FEE_TRG_RELEASE_IN(0) => fee_trg_release_i,
- FEE_TRG_STATUSBITS_IN => fee_trg_statusbits_i,
- FEE_DATA_IN => fee_data_i,
- FEE_DATA_WRITE_IN(0) => fee_data_write_i,
- FEE_DATA_FINISHED_IN(0) => fee_data_finished_i,
- FEE_DATA_ALMOST_FULL_OUT(0) => fee_almost_full_i,
-
- -- Slow Control Data Port
- REGIO_COMMON_STAT_REG_IN => common_stat_reg, --0x00
- REGIO_COMMON_CTRL_REG_OUT => common_ctrl_reg, --0x20
- REGIO_COMMON_STAT_STROBE_OUT => common_stat_reg_strobe,
- REGIO_COMMON_CTRL_STROBE_OUT => common_ctrl_reg_strobe,
- REGIO_STAT_REG_IN => stat_reg, --start 0x80
- REGIO_CTRL_REG_OUT => ctrl_reg, --start 0xc0
- REGIO_STAT_STROBE_OUT => stat_reg_strobe,
- REGIO_CTRL_STROBE_OUT => ctrl_reg_strobe,
- REGIO_VAR_ENDPOINT_ID(1 downto 0) => CODE_LINE,
- REGIO_VAR_ENDPOINT_ID(15 downto 2) => (others => '0'),
-
- BUS_ADDR_OUT => regio_addr_out,
- BUS_READ_ENABLE_OUT => regio_read_enable_out,
- BUS_WRITE_ENABLE_OUT => regio_write_enable_out,
- BUS_DATA_OUT => regio_data_out,
- BUS_DATA_IN => regio_data_in,
- BUS_DATAREADY_IN => regio_dataready_in,
- BUS_NO_MORE_DATA_IN => regio_no_more_data_in,
- BUS_WRITE_ACK_IN => regio_write_ack_in,
- BUS_UNKNOWN_ADDR_IN => regio_unknown_addr_in,
- BUS_TIMEOUT_OUT => regio_timeout_out,
- ONEWIRE_INOUT => TEMPSENS,
- ONEWIRE_MONITOR_OUT => open,
-
- TIME_GLOBAL_OUT => global_time,
- TIME_LOCAL_OUT => local_time,
- TIME_SINCE_LAST_TRG_OUT => time_since_last_trg,
- TIME_TICKS_OUT => timer_ticks,
-
- STAT_DEBUG_IPU => open,
- STAT_DEBUG_1 => open,
- STAT_DEBUG_2 => open,
- STAT_DEBUG_DATA_HANDLER_OUT => open,
- STAT_DEBUG_IPU_HANDLER_OUT => open,
- STAT_TRIGGER_OUT => open,
- CTRL_MPLEX => (others => '0'),
- IOBUF_CTRL_GEN => (others => '0'),
- STAT_ONEWIRE => open,
- STAT_ADDR_DEBUG => open,
- DEBUG_LVL1_HANDLER_OUT => open
- );
-
- timing_trg_received_i <= TRIGGER_LEFT;
----------------------------------------------------------------------------
--- Bus Handler
----------------------------------------------------------------------------
- THE_BUS_HANDLER : trb_net16_regio_bus_handler
- generic map(
- PORT_NUMBER => 4,
- PORT_ADDRESSES => (0 => x"d000", 1 => x"d100", 2 => x"a800", 3=>x"aa00", others => x"0000"),
- PORT_ADDR_MASK => (0 => 1, 1 => 6, 2 => 9, 3=> 4, others => 0)
- )
- port map(
- CLK => clk_100_i,
- RESET => reset_i,
-
- DAT_ADDR_IN => regio_addr_out,
- DAT_DATA_IN => regio_data_out,
- DAT_DATA_OUT => regio_data_in,
- DAT_READ_ENABLE_IN => regio_read_enable_out,
- DAT_WRITE_ENABLE_IN => regio_write_enable_out,
- DAT_TIMEOUT_IN => regio_timeout_out,
- DAT_DATAREADY_OUT => regio_dataready_in,
- DAT_WRITE_ACK_OUT => regio_write_ack_in,
- DAT_NO_MORE_DATA_OUT => regio_no_more_data_in,
- DAT_UNKNOWN_ADDR_OUT => regio_unknown_addr_in,
-
- --Bus Handler (SPI CTRL)
- BUS_READ_ENABLE_OUT(0) => spictrl_read_en,
- BUS_WRITE_ENABLE_OUT(0) => spictrl_write_en,
- BUS_DATA_OUT(0*32+31 downto 0*32) => spictrl_data_in,
- BUS_ADDR_OUT(0*16) => spictrl_addr,
- BUS_ADDR_OUT(0*16+15 downto 0*16+1) => open,
- BUS_TIMEOUT_OUT(0) => open,
- BUS_DATA_IN(0*32+31 downto 0*32) => spictrl_data_out,
- BUS_DATAREADY_IN(0) => spictrl_ack,
- BUS_WRITE_ACK_IN(0) => spictrl_ack,
- BUS_NO_MORE_DATA_IN(0) => spictrl_busy,
- BUS_UNKNOWN_ADDR_IN(0) => '0',
-
- --Bus Handler (SPI Memory)
- BUS_READ_ENABLE_OUT(1) => spimem_read_en,
- BUS_WRITE_ENABLE_OUT(1) => spimem_write_en,
- BUS_DATA_OUT(1*32+31 downto 1*32) => spimem_data_in,
- BUS_ADDR_OUT(1*16+5 downto 1*16) => spimem_addr,
- BUS_ADDR_OUT(1*16+15 downto 1*16+6) => open,
- BUS_TIMEOUT_OUT(1) => open,
- BUS_DATA_IN(1*32+31 downto 1*32) => spimem_data_out,
- BUS_DATAREADY_IN(1) => spimem_ack,
- BUS_WRITE_ACK_IN(1) => spimem_ack,
- BUS_NO_MORE_DATA_IN(1) => '0',
- BUS_UNKNOWN_ADDR_IN(1) => '0',
-
-
- --CBMNet (read-out)
- BUS_READ_ENABLE_OUT(2) => cbm_regio_read_enable_i,
- BUS_WRITE_ENABLE_OUT(2) => cbm_regio_write_enable_i,
- BUS_DATA_OUT(2*32+31 downto 2*32) => cbm_regio_control_data_i,
- BUS_ADDR_OUT(2*16+15 downto 2*16) => cbm_regio_addr_i,
- BUS_TIMEOUT_OUT(2) => cbm_regio_timeout_i,
- BUS_DATA_IN(2*32+31 downto 2*32) => cbm_regio_status_data_i,
- BUS_DATAREADY_IN(2) => cbm_regio_dataready_i,
- BUS_WRITE_ACK_IN(2) => cbm_regio_write_ack_i,
- BUS_NO_MORE_DATA_IN(2) => cbm_regio_no_more_data_i,
- BUS_UNKNOWN_ADDR_IN(2) => cbm_regio_unknown_addr_i,
-
-
- --TrbNet Pattern Generator
- BUS_READ_ENABLE_OUT(3) => cbm_pgen_read_enable_i,
- BUS_WRITE_ENABLE_OUT(3) => cbm_pgen_write_enable_i,
- BUS_DATA_OUT(3*32+31 downto 3*32) => cbm_pgen_control_data_i,
- BUS_ADDR_OUT(3*16+15 downto 3*16) => cbm_pgen_addr_i,
- BUS_TIMEOUT_OUT(3) => cbm_pgen_timeout_i,
- BUS_DATA_IN(3*32+31 downto 3*32) => cbm_pgen_status_data_i,
- BUS_DATAREADY_IN(3) => cbm_pgen_dataready_i,
- BUS_WRITE_ACK_IN(3) => cbm_pgen_write_ack_i,
- BUS_NO_MORE_DATA_IN(3) => cbm_pgen_no_more_data_i,
- BUS_UNKNOWN_ADDR_IN(3) => cbm_pgen_unknown_addr_i,
-
-
- STAT_DEBUG => open
- );
-
----------------------------------------------------------------------------
--- SPI / Flash
----------------------------------------------------------------------------
-
- THE_SPI_MASTER : spi_master
- port map(
- CLK_IN => clk_100_i,
- RESET_IN => reset_i,
- -- Slave bus
- BUS_READ_IN => spictrl_read_en,
- BUS_WRITE_IN => spictrl_write_en,
- BUS_BUSY_OUT => spictrl_busy,
- BUS_ACK_OUT => spictrl_ack,
- BUS_ADDR_IN(0) => spictrl_addr,
- BUS_DATA_IN => spictrl_data_in,
- BUS_DATA_OUT => spictrl_data_out,
- -- SPI connections
- SPI_CS_OUT => FLASH_CS,
- SPI_SDI_IN => FLASH_DOUT,
- SPI_SDO_OUT => FLASH_DIN,
- SPI_SCK_OUT => FLASH_CLK,
- -- BRAM for read/write data
- BRAM_A_OUT => spi_bram_addr,
- BRAM_WR_D_IN => spi_bram_wr_d,
- BRAM_RD_D_OUT => spi_bram_rd_d,
- BRAM_WE_OUT => spi_bram_we,
- -- Status lines
- STAT => open
- );
-
--- data memory for SPI accesses
- THE_SPI_MEMORY : spi_databus_memory
- port map(
- CLK_IN => clk_100_i,
- RESET_IN => reset_i,
- -- Slave bus
- BUS_ADDR_IN => spimem_addr,
- BUS_READ_IN => spimem_read_en,
- BUS_WRITE_IN => spimem_write_en,
- BUS_ACK_OUT => spimem_ack,
- BUS_DATA_IN => spimem_data_in,
- BUS_DATA_OUT => spimem_data_out,
- -- state machine connections
- BRAM_ADDR_IN => spi_bram_addr,
- BRAM_WR_D_OUT => spi_bram_wr_d,
- BRAM_RD_D_IN => spi_bram_rd_d,
- BRAM_WE_IN => spi_bram_we,
- -- Status lines
- STAT => open
- );
-
----------------------------------------------------------------------------
--- Reboot FPGA
----------------------------------------------------------------------------
- THE_FPGA_REBOOT : fpga_reboot
- port map(
- CLK => clk_100_i,
- RESET => reset_i,
- DO_REBOOT => common_ctrl_reg(15),
- PROGRAMN => PROGRAMN
- );
-
-
-
----------------------------------------------------------------------------
--- LED
----------------------------------------------------------------------------
- LED_GREEN <= not med_stat_op(9);
- LED_ORANGE <= not med_stat_op(10);
- LED_RED <= not time_counter(26);
- LED_YELLOW <= not med_stat_op(11);
-
--- end generate;
-
-
+library ieee;\r
+use ieee.std_logic_1164.all;\r
+use ieee.numeric_std.all;\r
+\r
+library work;\r
+use work.trb_net_std.all;\r
+use work.trb_net_components.all;\r
+use work.trb3_components.all;\r
+use work.version.all;\r
+\r
+use work.cbmnet_interface_pkg.all;\r
+use work.cbmnet_phy_pkg.all;\r
+\r
+\r
+entity trb3_periph_cbmnet is\r
+ generic (\r
+ CBM_FEE_MODE : integer := CBM_FEE_MODE_C; -- in FEE mode, logic will run on recovered clock and (for now) listen only to data received\r
+ -- in Master mode, logic will run on internal clock and regularly send dlms\r
+ INCLUDE_TRBNET : integer := INCLUDE_TRBNET_C\r
+ );\r
+ port(\r
+ --Clocks\r
+ CLK_GPLL_LEFT : in std_logic; --Clock Manager 1/(2468), 125 MHz\r
+ CLK_GPLL_RIGHT : in std_logic; --Clock Manager 2/(2468), 200 MHz <-- MAIN CLOCK for FPGA\r
+ CLK_PCLK_LEFT : in std_logic; --Clock Fan-out, 200/400 MHz <-- For TDC. Same oscillator as GPLL right!\r
+ CLK_PCLK_RIGHT : in std_logic; --Clock Fan-out, 200/400 MHz <-- For TDC. Same oscillator as GPLL right!\r
+\r
+ --Trigger\r
+ TRIGGER_LEFT : in std_logic; --left side trigger input from fan-out\r
+ TRIGGER_RIGHT : in std_logic; --right side trigger input from fan-out\r
+\r
+ --Serdes\r
+ CLK_SERDES_INT_LEFT : in std_logic; --Clock Manager 1/(1357), off, 125 MHz possible\r
+ CLK_SERDES_INT_RIGHT : in std_logic; --Clock Manager 2/(1357), 200 MHz, only in case of problems\r
+ SERDES_INT_TX : out std_logic_vector(3 downto 0);\r
+ SERDES_INT_RX : in std_logic_vector(3 downto 0);\r
+ SERDES_ADDON_TX : out std_logic_vector(11 downto 0);\r
+ SERDES_ADDON_RX : in std_logic_vector(11 downto 0);\r
+\r
+ --Inter-FPGA Communication\r
+ FPGA5_COMM : inout std_logic_vector(11 downto 0);\r
+ --Bit 0/1 input, serial link RX active\r
+ --Bit 2/3 output, serial link TX active\r
+ --others yet undefined\r
+ --Connection to AddOn\r
+ LED_LINKOK : out std_logic_vector(6 downto 1);\r
+ LED_RX : out std_logic_vector(6 downto 1); \r
+ LED_TX : out std_logic_vector(6 downto 1);\r
+\r
+ SFP_MOD0 : in std_logic_vector(6 downto 1);\r
+ SFP_TXDIS : out std_logic_vector(6 downto 1); \r
+ SFP_LOS : in std_logic_vector(6 downto 1);\r
+ SFP_MOD1 : out std_logic_vector(6 downto 1); \r
+ SFP_MOD2 : inout std_logic_vector(6 downto 1); \r
+\r
+ SFP_RATESEL: out std_logic_vector(6 downto 1); \r
+ SFP_TXFAULT: in std_logic_vector(6 downto 1);\r
+\r
+ --Flash ROM & Reboot\r
+ FLASH_CLK : out std_logic;\r
+ FLASH_CS : out std_logic;\r
+ FLASH_DIN : out std_logic;\r
+ FLASH_DOUT : in std_logic;\r
+ PROGRAMN : out std_logic; --reboot FPGA\r
+\r
+ --Misc\r
+ TEMPSENS : inout std_logic; --Temperature Sensor\r
+ CODE_LINE : in std_logic_vector(1 downto 0);\r
+ LED_GREEN : out std_logic;\r
+ LED_ORANGE : out std_logic;\r
+ LED_RED : out std_logic;\r
+ LED_YELLOW : out std_logic;\r
+ SUPPL : in std_logic; --terminated diff pair, PCLK, Pads\r
+\r
+ --Test Connectors\r
+ TEST_LINE : out std_logic_vector(15 downto 0); \r
+ --TEST_LVDS_LINE : out std_logic_vector(1 downto 0);\r
+\r
+ -- PCS Core TODO: Suppose this is necessary only for simulation\r
+ SD_RXD_N_IN : in std_logic;\r
+ SD_RXD_P_IN : in std_logic;\r
+ SD_TXD_N_OUT : out std_logic;\r
+ SD_TXD_P_OUT : out std_logic\r
+ );\r
+ \r
+ attribute syn_useioff : boolean;\r
+ --no IO-FF for LEDs relaxes timing constraints\r
+ attribute syn_useioff of LED_GREEN : signal is false;\r
+ attribute syn_useioff of LED_ORANGE : signal is false;\r
+ attribute syn_useioff of LED_RED : signal is false;\r
+ attribute syn_useioff of LED_YELLOW : signal is false;\r
+ attribute syn_useioff of TEMPSENS : signal is false;\r
+ attribute syn_useioff of PROGRAMN : signal is false;\r
+ attribute syn_useioff of CODE_LINE : signal is false;\r
+ attribute syn_useioff of TRIGGER_LEFT : signal is false;\r
+ attribute syn_useioff of TRIGGER_RIGHT : signal is false;\r
+ attribute syn_useioff of LED_LINKOK : signal is false;\r
+ attribute syn_useioff of LED_RX : signal is false;\r
+ attribute syn_useioff of LED_TX : signal is false;\r
+\r
+ --important signals _with_ IO-FF\r
+ attribute syn_useioff of FLASH_CLK : signal is true;\r
+ attribute syn_useioff of FLASH_CS : signal is true;\r
+ attribute syn_useioff of FLASH_DIN : signal is true;\r
+ attribute syn_useioff of FLASH_DOUT : signal is true;\r
+ attribute syn_useioff of FPGA5_COMM : signal is true;\r
+ attribute syn_useioff of TEST_LINE : signal is true;\r
+\r
+ attribute nopad : string;\r
+ attribute nopad of SD_RXD_N_IN, SD_RXD_P_IN, SD_TXD_N_OUT, SD_TXD_P_OUT : signal is "true";\r
+ \r
+ attribute syn_keep : boolean;\r
+ attribute syn_keep of CLK_GPLL_LEFT, CLK_GPLL_RIGHT, CLK_PCLK_LEFT, CLK_PCLK_RIGHT, TRIGGER_LEFT, TRIGGER_RIGHT : signal is true;\r
+ attribute syn_preserve : boolean;\r
+ \r
+end entity;\r
+\r
+architecture trb3_periph_arch of trb3_periph_cbmnet is\r
+ --Constants\r
+ constant REGIO_NUM_STAT_REGS : integer := 2;\r
+ constant REGIO_NUM_CTRL_REGS : integer := 2;\r
+\r
+ --Clock / Reset\r
+ signal clk_125_i : std_logic; -- clock reference for CBMNet serdes\r
+ signal clk_100_i : std_logic; --clock for main logic, 100 MHz, via Clock Manager and internal PLL\r
+ signal clk_200_i : std_logic; --clock for logic at 200 MHz, via Clock Manager and bypassed PLL\r
+ signal pll_lock : std_logic; --Internal PLL locked. E.g. used to reset all internal logic.\r
+ signal pll_lock1, pll_lock2 : std_logic;\r
+ signal clear_i : std_logic;\r
+ signal reset_i : std_logic;\r
+ signal GSR_N : std_logic;\r
+\r
+ attribute syn_keep of GSR_N : signal is true;\r
+ attribute syn_preserve of GSR_N : signal is true;\r
+\r
+ --Media Interface\r
+ signal med_stat_op : std_logic_vector (1*16-1 downto 0) := (others => '0');\r
+ signal med_ctrl_op : std_logic_vector (1*16-1 downto 0);\r
+ signal med_stat_debug : std_logic_vector (1*64-1 downto 0);\r
+ signal med_ctrl_debug : std_logic_vector (1*64-1 downto 0);\r
+ signal med_data_out : std_logic_vector (1*16-1 downto 0);\r
+ signal med_packet_num_out : std_logic_vector (1*3-1 downto 0);\r
+ signal med_dataready_out : std_logic;\r
+ signal med_read_out : std_logic;\r
+ signal med_data_in : std_logic_vector (1*16-1 downto 0);\r
+ signal med_packet_num_in : std_logic_vector (1*3-1 downto 0);\r
+ signal med_dataready_in : std_logic;\r
+ signal med_read_in : std_logic;\r
+\r
+ --LVL1 channel\r
+ signal timing_trg_received_i : std_logic;\r
+ signal trg_data_valid_i : std_logic;\r
+ signal trg_timing_valid_i : std_logic;\r
+ signal trg_notiming_valid_i : std_logic;\r
+ signal trg_invalid_i : std_logic;\r
+ signal trg_type_i : std_logic_vector(3 downto 0);\r
+ signal trg_number_i : std_logic_vector(15 downto 0);\r
+ signal trg_code_i : std_logic_vector(7 downto 0);\r
+ signal trg_information_i : std_logic_vector(23 downto 0);\r
+ signal trg_int_number_i : std_logic_vector(15 downto 0);\r
+ signal trg_multiple_trg_i : std_logic;\r
+ signal trg_timeout_detected_i: std_logic;\r
+ signal trg_spurious_trg_i : std_logic;\r
+ signal trg_missing_tmg_trg_i : std_logic;\r
+ signal trg_spike_detected_i : std_logic;\r
+\r
+ --Data channel\r
+ signal fee_trg_release_i : std_logic;\r
+ signal fee_trg_statusbits_i : std_logic_vector(31 downto 0);\r
+ signal fee_data_i : std_logic_vector(31 downto 0);\r
+ signal fee_data_write_i : std_logic;\r
+ signal fee_data_finished_i : std_logic;\r
+ signal fee_almost_full_i : std_logic;\r
+\r
+ --Slow Control channel\r
+ signal common_stat_reg : std_logic_vector(std_COMSTATREG*32-1 downto 0);\r
+ signal common_ctrl_reg : std_logic_vector(std_COMCTRLREG*32-1 downto 0);\r
+ signal stat_reg : std_logic_vector(32*2**REGIO_NUM_STAT_REGS-1 downto 0);\r
+ signal ctrl_reg : std_logic_vector(32*2**REGIO_NUM_CTRL_REGS-1 downto 0);\r
+ signal common_stat_reg_strobe : std_logic_vector(std_COMSTATREG-1 downto 0);\r
+ signal common_ctrl_reg_strobe : std_logic_vector(std_COMCTRLREG-1 downto 0);\r
+ signal stat_reg_strobe : std_logic_vector(2**REGIO_NUM_STAT_REGS-1 downto 0);\r
+ signal ctrl_reg_strobe : std_logic_vector(2**REGIO_NUM_CTRL_REGS-1 downto 0);\r
+\r
+ --RegIO\r
+ signal my_address : std_logic_vector (15 downto 0);\r
+ signal regio_addr_out : std_logic_vector (15 downto 0);\r
+ signal regio_read_enable_out : std_logic;\r
+ signal regio_write_enable_out : std_logic;\r
+ signal regio_data_out : std_logic_vector (31 downto 0);\r
+ signal regio_data_in : std_logic_vector (31 downto 0);\r
+ signal regio_dataready_in : std_logic;\r
+ signal regio_no_more_data_in : std_logic;\r
+ signal regio_write_ack_in : std_logic;\r
+ signal regio_unknown_addr_in : std_logic;\r
+ signal regio_timeout_out : std_logic;\r
+\r
+ --Timer\r
+ signal global_time : std_logic_vector(31 downto 0);\r
+ signal local_time : std_logic_vector(7 downto 0);\r
+ signal time_since_last_trg : std_logic_vector(31 downto 0);\r
+ signal timer_ticks : std_logic_vector(1 downto 0);\r
+\r
+ --Flash\r
+ signal spictrl_read_en : std_logic;\r
+ signal spictrl_write_en : std_logic;\r
+ signal spictrl_data_in : std_logic_vector(31 downto 0);\r
+ signal spictrl_addr : std_logic;\r
+ signal spictrl_data_out : std_logic_vector(31 downto 0);\r
+ signal spictrl_ack : std_logic;\r
+ signal spictrl_busy : std_logic;\r
+ signal spimem_read_en : std_logic;\r
+ signal spimem_write_en : std_logic;\r
+ signal spimem_data_in : std_logic_vector(31 downto 0);\r
+ signal spimem_addr : std_logic_vector(5 downto 0);\r
+ signal spimem_data_out : std_logic_vector(31 downto 0);\r
+ signal spimem_ack : std_logic;\r
+\r
+ signal trb_trigger : std_logic;\r
+ signal sync_dlm_sense : std_logic;\r
+ signal sync_pulser : std_logic;\r
+\r
+\r
+ signal spi_bram_addr : std_logic_vector(7 downto 0);\r
+ signal spi_bram_wr_d : std_logic_vector(7 downto 0);\r
+ signal spi_bram_rd_d : std_logic_vector(7 downto 0);\r
+ signal spi_bram_we : std_logic;\r
+\r
+ --FPGA Test\r
+ signal time_counter : unsigned(31 downto 0);\r
+\r
+ -- CBMNet signals\r
+\r
+\r
+ signal hub_cts_number : std_logic_vector(15 downto 0);\r
+ signal hub_cts_code : std_logic_vector(7 downto 0);\r
+ signal hub_cts_information : std_logic_vector(7 downto 0);\r
+ signal hub_cts_start_readout : std_logic;\r
+ signal hub_cts_readout_type : std_logic_vector(3 downto 0);\r
+ signal hub_cts_readout_finished : std_logic;\r
+ signal hub_cts_status_bits : std_logic_vector(31 downto 0);\r
+ signal hub_fee_data : std_logic_vector(15 downto 0);\r
+ signal hub_fee_dataready : std_logic;\r
+ signal hub_fee_read : std_logic;\r
+ signal hub_fee_status_bits : std_logic_vector(31 downto 0);\r
+ signal hub_fee_busy : std_logic;\r
+\r
+ signal gbe_cts_number : std_logic_vector(15 downto 0);\r
+ signal gbe_cts_code : std_logic_vector(7 downto 0);\r
+ signal gbe_cts_information : std_logic_vector(7 downto 0);\r
+ signal gbe_cts_start_readout : std_logic;\r
+ signal gbe_cts_readout_type : std_logic_vector(3 downto 0);\r
+ signal gbe_cts_readout_finished : std_logic;\r
+ signal gbe_cts_status_bits : std_logic_vector(31 downto 0);\r
+ signal gbe_fee_data : std_logic_vector(15 downto 0);\r
+ signal gbe_fee_dataready : std_logic;\r
+ signal gbe_fee_read : std_logic;\r
+ signal gbe_fee_status_bits : std_logic_vector(31 downto 0);\r
+ signal gbe_fee_busy : std_logic; \r
+\r
+ signal do_reboot_i : std_logic;\r
+\r
+ signal cbm_clk_i : std_logic;\r
+ signal cbm_reset_i : std_logic;\r
+ signal cbm_link_active : std_logic; -- link is active and can send and receive data\r
+ signal etm_trigger_i : std_logic;\r
+ signal cbm_sync_dlm_sensed_i : std_logic;\r
+ signal cbm_sync_pulser_i : std_logic;\r
+ signal cbm_sync_timing_trigger_i : std_logic;\r
+\r
+ signal cbm_regio_addr_i : std_logic_vector(15 downto 0);\r
+ signal cbm_regio_status_data_i : std_logic_vector(31 downto 0);\r
+ signal cbm_regio_read_enable_i : std_logic;\r
+ signal cbm_regio_write_enable_i : std_logic;\r
+ signal cbm_regio_timeout_i : std_logic;\r
+ signal cbm_regio_control_data_i : std_logic_vector(31 downto 0);\r
+ signal cbm_regio_dataready_i : std_logic;\r
+ signal cbm_regio_write_ack_i : std_logic;\r
+ signal cbm_regio_no_more_data_i : std_logic;\r
+ signal cbm_regio_unknown_addr_i : std_logic;\r
+\r
+\r
+ signal cbm_pgen_addr_i : std_logic_vector(15 downto 0);\r
+ signal cbm_pgen_status_data_i : std_logic_vector(31 downto 0);\r
+ signal cbm_pgen_read_enable_i : std_logic;\r
+ signal cbm_pgen_write_enable_i : std_logic;\r
+ signal cbm_pgen_timeout_i : std_logic;\r
+ signal cbm_pgen_control_data_i : std_logic_vector(31 downto 0);\r
+ signal cbm_pgen_dataready_i : std_logic;\r
+ signal cbm_pgen_write_ack_i : std_logic;\r
+ signal cbm_pgen_no_more_data_i : std_logic;\r
+ signal cbm_pgen_unknown_addr_i : std_logic;\r
+ \r
+ signal cbm_debug_i : std_logic_vector(31 downto 0);\r
+ \r
+begin\r
+ clk_125_i <= CLK_GPLL_LEFT; \r
+ assert(INCLUDE_TRBNET = c_YES);\r
+\r
+ THE_CBM_BRIDGE: cbmnet_bridge\r
+ port map (\r
+ -- clock and reset\r
+ CLK125_IN => clk_125_i, -- in std_logic;\r
+ ASYNC_RESET_IN => '0',\r
+ TRB_CLK_IN => clk_100_i, -- in std_logic;\r
+ TRB_RESET_IN => reset_i, -- in std_logic;\r
+ \r
+ CBM_CLK_OUT => cbm_clk_i, -- out std_logic;\r
+ CBM_RESET_OUT=> cbm_reset_i, -- out std_logic;\r
+ \r
+ -- Media Interface\r
+ SD_RXD_P_IN => SD_RXD_P_IN,\r
+ SD_RXD_N_IN => SD_RXD_N_IN,\r
+ SD_TXD_P_OUT => SD_TXD_P_OUT,\r
+ SD_TXD_N_OUT => SD_TXD_N_OUT,\r
+\r
+ SD_PRSNT_N_IN => SFP_MOD0(1),\r
+ SD_LOS_IN => SFP_LOS(1),\r
+ SD_TXDIS_OUT => SFP_TXDIS(1),\r
+ \r
+ LED_RX_OUT => LED_RX(1),\r
+ LED_TX_OUT => LED_TX(1),\r
+ LED_OK_OUT => LED_LINKOK(1),\r
+ \r
+ -- Status and strobes \r
+ CBM_LINK_ACTIVE_OUT => cbm_link_active,\r
+ CBM_DLM_OUT => cbm_sync_dlm_sensed_i, -- out std_logic;\r
+ CBM_TIMING_TRIGGER_OUT => cbm_sync_timing_trigger_i, -- out std_logic;\r
+ CBM_SYNC_PULSER_OUT => cbm_sync_pulser_i, -- out std_logic;\r
+ \r
+ -- TRBNet Terminal\r
+ TRB_TRIGGER_OUT => trb_trigger, -- out std_logic;\r
+\r
+ --data output for read-out\r
+ TRB_TRIGGER_IN => timing_trg_received_i, -- in std_logic;\r
+ \r
+ TRB_RDO_VALID_DATA_TRG_IN => trg_data_valid_i,\r
+ TRB_RDO_VALID_NO_TIMING_IN => trg_notiming_valid_i,\r
+ \r
+ TRB_RDO_DATA_OUT => fee_data_i, -- out std_logic_vector(31 downto 0);\r
+ TRB_RDO_WRITE_OUT => fee_data_write_i, -- out std_logic;\r
+ TRB_RDO_STATUSBIT_OUT => fee_trg_statusbits_i, -- out std_logic_vector(31 downto 0);\r
+ TRB_RDO_FINISHED_OUT => fee_data_finished_i, -- out std_logic;\r
+ \r
+ HUB_CTS_NUMBER_IN => hub_cts_number, -- in std_logic_vector (15 downto 0);\r
+ HUB_CTS_CODE_IN => hub_cts_code, -- in std_logic_vector (7 downto 0);\r
+ HUB_CTS_INFORMATION_IN => hub_cts_information, -- in std_logic_vector (7 downto 0);\r
+ HUB_CTS_READOUT_TYPE_IN => hub_cts_readout_type, -- in std_logic_vector (3 downto 0);\r
+ HUB_CTS_START_READOUT_IN => hub_cts_start_readout, -- in std_logic;\r
+ HUB_CTS_READOUT_FINISHED_OUT => hub_cts_readout_finished, -- out std_logic; --no more data, end transfer, send TRM\r
+ HUB_CTS_STATUS_BITS_OUT => hub_cts_status_bits, -- out std_logic_vector (31 downto 0);\r
+ HUB_FEE_DATA_IN => hub_fee_data, -- in std_logic_vector (15 downto 0);\r
+ HUB_FEE_DATAREADY_IN => hub_fee_dataready, -- in std_logic;\r
+ HUB_FEE_READ_OUT => hub_fee_read, -- out std_logic; --must be high when idle, otherwise you will never get a dataready\r
+ HUB_FEE_STATUS_BITS_IN => hub_fee_status_bits, -- in std_logic_vector (31 downto 0);\r
+ HUB_FEE_BUSY_IN => hub_fee_busy, -- in std_logic; \r
+\r
+ -- connect to GbE\r
+ GBE_CTS_NUMBER_OUT => gbe_cts_number, -- out std_logic_vector (15 downto 0);\r
+ GBE_CTS_CODE_OUT => gbe_cts_code, -- out std_logic_vector (7 downto 0);\r
+ GBE_CTS_INFORMATION_OUT => gbe_cts_information, -- out std_logic_vector (7 downto 0);\r
+ GBE_CTS_READOUT_TYPE_OUT => gbe_cts_readout_type, -- out std_logic_vector (3 downto 0);\r
+ GBE_CTS_START_READOUT_OUT => gbe_cts_start_readout, -- out std_logic;\r
+ GBE_CTS_READOUT_FINISHED_IN => gbe_cts_readout_finished, -- in std_logic; --no more data, end transfer, send TRM\r
+ GBE_CTS_STATUS_BITS_IN => gbe_cts_status_bits, -- in std_logic_vector (31 downto 0);\r
+ GBE_FEE_DATA_OUT => gbe_fee_data, -- out std_logic_vector (15 downto 0);\r
+ GBE_FEE_DATAREADY_OUT => gbe_fee_dataready, -- out std_logic;\r
+ GBE_FEE_READ_IN => gbe_fee_read, -- in std_logic; --must be high when idle, otherwise you will never get a dataready\r
+ GBE_FEE_STATUS_BITS_OUT => gbe_fee_status_bits, -- out std_logic_vector (31 downto 0);\r
+ GBE_FEE_BUSY_OUT => gbe_fee_busy, -- out std_logic;\r
+\r
+ -- reg io\r
+ -- reg io\r
+ REGIO_ADDR_IN => cbm_regio_addr_i, -- in std_logic_vector(15 downto 0);\r
+ REGIO_DATA_IN => cbm_regio_control_data_i, -- in std_logic_vector(31 downto 0);\r
+ REGIO_TIMEOUT_IN => cbm_regio_timeout_i, -- in std_logic;\r
+ REGIO_READ_ENABLE_IN => cbm_regio_read_enable_i, -- in std_logic;\r
+ REGIO_WRITE_ENABLE_IN => cbm_regio_write_enable_i, -- in std_logic;\r
+ REGIO_DATA_OUT => cbm_regio_status_data_i, -- out std_logic_vector(31 downto 0);\r
+ REGIO_DATAREADY_OUT => cbm_regio_dataready_i, -- out std_logic;\r
+ REGIO_WRITE_ACK_OUT => cbm_regio_write_ack_i, -- out std_logic;\r
+ REGIO_NO_MORE_DATA_OUT => cbm_regio_no_more_data_i, -- out std_logic;\r
+ REGIO_UNKNOWN_ADDR_OUT => cbm_regio_unknown_addr_i, -- out std_logic;\r
+ \r
+ DEBUG_OUT => cbm_debug_i\r
+ );\r
+\r
+ fee_trg_release_i <= fee_data_finished_i;\r
+ \r
+ SFP_RATESEL <= (others => '0');\r
+ \r
+ THE_RDO_PGEN: trbnet_rdo_pattern_generator\r
+ port map (\r
+ CLK_IN => clk_100_i,\r
+ RESET_IN => reset_i,\r
+\r
+ HUB_CTS_NUMBER_OUT => hub_cts_number, \r
+ HUB_CTS_CODE_OUT => hub_cts_code,\r
+ HUB_CTS_OUTFORMATION_OUT => hub_cts_information,\r
+ HUB_CTS_READOUT_TYPE_OUT => hub_cts_readout_type,\r
+ HUB_CTS_START_READOUT_OUT => hub_cts_start_readout,\r
+ HUB_CTS_READOUT_FINISHED_IN => hub_cts_readout_finished,\r
+ HUB_CTS_STATUS_BITS_IN => hub_cts_status_bits,\r
+ HUB_FEE_DATA_OUT => hub_fee_data,\r
+ HUB_FEE_DATAREADY_OUT => hub_fee_dataready,\r
+ HUB_FEE_READ_IN => hub_fee_read,\r
+ HUB_FEE_STATUS_BITS_OUT => hub_fee_status_bits,\r
+ HUB_FEE_BUSY_OUT => hub_fee_busy,\r
+\r
+ REGIO_READ_ENABLE_IN => cbm_pgen_read_enable_i,\r
+ REGIO_WRITE_ENABLE_IN => cbm_pgen_write_enable_i,\r
+ REGIO_DATA_IN => cbm_pgen_control_data_i,\r
+ REGIO_ADDR_IN => cbm_pgen_addr_i,\r
+ REGIO_TIMEOUT_IN => cbm_pgen_timeout_i,\r
+ REGIO_DATA_OUT => cbm_pgen_status_data_i,\r
+ REGIO_DATAREADY_OUT => cbm_pgen_dataready_i,\r
+ REGIO_WRITE_ACK_OUT => cbm_pgen_write_ack_i,\r
+ REGIO_NO_MORE_DATA_OUT => cbm_pgen_no_more_data_i,\r
+ REGIO_UNKNOWN_ADDR_OUT => cbm_pgen_unknown_addr_i\r
+ );\r
+ gbe_fee_read <= '1';\r
+ gbe_cts_status_bits <= x"beafc0de";\r
+ \r
+---------------------------------------------------------------------------\r
+-- Reset Generation\r
+---------------------------------------------------------------------------\r
+ GSR_N <= pll_lock;\r
+\r
+ THE_RESET_HANDLER : trb_net_reset_handler\r
+ generic map(\r
+ RESET_DELAY => x"FEEE"\r
+ )\r
+ port map(\r
+ CLEAR_IN => '0', -- reset input (high active, async)\r
+ CLEAR_N_IN => '1', -- reset input (low active, async)\r
+ CLK_IN => clk_200_i, -- raw master clock, NOT from PLL/DLL!\r
+ SYSCLK_IN => clk_100_i, -- PLL/DLL remastered clock\r
+ PLL_LOCKED_IN => pll_lock, -- master PLL lock signal (async)\r
+ RESET_IN => '0', -- general reset signal (SYSCLK)\r
+ TRB_RESET_IN => med_stat_op(13), -- TRBnet reset signal (SYSCLK)\r
+ CLEAR_OUT => clear_i, -- async reset out, USE WITH CARE!\r
+ RESET_OUT => reset_i, -- synchronous reset out (SYSCLK)\r
+ DEBUG_OUT => open\r
+ ); \r
+\r
+\r
+---------------------------------------------------------------------------\r
+-- Clock Handling\r
+---------------------------------------------------------------------------\r
+\r
+ THE_MAIN_PLL : pll_in200_out100\r
+ port map(\r
+ CLK => CLK_GPLL_RIGHT,\r
+ CLKOP => clk_100_i,\r
+ CLKOK => clk_200_i,\r
+-- CLKOS => open,\r
+ LOCK => pll_lock1\r
+ );\r
+ \r
+ pll_lock <= pll_lock1; -- and pll_lock2;\r
+\r
+-- GEN_TRBNET: if INCLUDE_TRBNET = c_YES generate\r
+---------------------------------------------------------------------------\r
+-- The TrbNet media interface (to other FPGA)\r
+---------------------------------------------------------------------------\r
+ THE_MEDIA_UPLINK : trb_net16_med_ecp3_sfp\r
+ generic map(\r
+ SERDES_NUM => 1, --number of serdes in quad\r
+ EXT_CLOCK => c_NO, --use internal clock\r
+ USE_200_MHZ => c_YES, --run on 200 MHz clock\r
+ USE_125_MHZ => c_NO,\r
+ USE_CTC => c_NO\r
+ )\r
+ port map(\r
+ CLK => clk_200_i,\r
+ SYSCLK => clk_100_i,\r
+ RESET => reset_i,\r
+ CLEAR => clear_i,\r
+ CLK_EN => '1',\r
+ --Internal Connection\r
+ MED_DATA_IN => med_data_out,\r
+ MED_PACKET_NUM_IN => med_packet_num_out,\r
+ MED_DATAREADY_IN => med_dataready_out,\r
+ MED_READ_OUT => med_read_in,\r
+ MED_DATA_OUT => med_data_in,\r
+ MED_PACKET_NUM_OUT => med_packet_num_in,\r
+ MED_DATAREADY_OUT => med_dataready_in,\r
+ MED_READ_IN => med_read_out,\r
+ REFCLK2CORE_OUT => open,\r
+ --SFP Connection\r
+ SD_RXD_P_IN => SERDES_INT_RX(2),\r
+ SD_RXD_N_IN => SERDES_INT_RX(3),\r
+ SD_TXD_P_OUT => SERDES_INT_TX(2),\r
+ SD_TXD_N_OUT => SERDES_INT_TX(3),\r
+ SD_REFCLK_P_IN => open,\r
+ SD_REFCLK_N_IN => open,\r
+ SD_PRSNT_N_IN => FPGA5_COMM(0),\r
+ SD_LOS_IN => FPGA5_COMM(0),\r
+ SD_TXDIS_OUT => FPGA5_COMM(2),\r
+ -- Status and control port\r
+ STAT_OP => med_stat_op,\r
+ CTRL_OP => med_ctrl_op,\r
+ STAT_DEBUG => med_stat_debug,\r
+ CTRL_DEBUG => (others => '0'),\r
+ \r
+ sci_ack => open,\r
+ clk_rx_full_out => open,\r
+ clk_rx_half_out => open\r
+ );\r
+\r
+---------------------------------------------------------------------------\r
+-- Endpoint\r
+---------------------------------------------------------------------------\r
+ THE_ENDPOINT : trb_net16_endpoint_hades_full_handler\r
+ generic map(\r
+ REGIO_NUM_STAT_REGS => REGIO_NUM_STAT_REGS, --4, --16 stat reg\r
+ REGIO_NUM_CTRL_REGS => REGIO_NUM_CTRL_REGS, --3, --8 cotrol reg\r
+ ADDRESS_MASK => x"FFFF",\r
+ BROADCAST_BITMASK => x"FF",\r
+ BROADCAST_SPECIAL_ADDR => x"45",\r
+ REGIO_COMPILE_TIME => std_logic_vector(to_unsigned(VERSION_NUMBER_TIME, 32)),\r
+ REGIO_HARDWARE_VERSION => x"91000001",\r
+ REGIO_INIT_ADDRESS => x"f301",\r
+ REGIO_USE_VAR_ENDPOINT_ID => c_YES,\r
+ CLOCK_FREQUENCY => 100,\r
+ TIMING_TRIGGER_RAW => c_YES,\r
+ --Configure data handler\r
+ DATA_INTERFACE_NUMBER => 1,\r
+ DATA_BUFFER_DEPTH => 13, --13\r
+ DATA_BUFFER_WIDTH => 32,\r
+ DATA_BUFFER_FULL_THRESH => 2**13-800, --2**13-1024\r
+ TRG_RELEASE_AFTER_DATA => c_YES,\r
+ HEADER_BUFFER_DEPTH => 9,\r
+ HEADER_BUFFER_FULL_THRESH => 2**9-16\r
+ )\r
+ port map(\r
+ CLK => clk_100_i,\r
+ RESET => reset_i,\r
+ CLK_EN => '1',\r
+ MED_DATAREADY_OUT => med_dataready_out, -- open, --\r
+ MED_DATA_OUT => med_data_out, -- open, --\r
+ MED_PACKET_NUM_OUT => med_packet_num_out, -- open, --\r
+ MED_READ_IN => med_read_in,\r
+ MED_DATAREADY_IN => med_dataready_in,\r
+ MED_DATA_IN => med_data_in,\r
+ MED_PACKET_NUM_IN => med_packet_num_in,\r
+ MED_READ_OUT => med_read_out, -- open, --\r
+ MED_STAT_OP_IN => med_stat_op,\r
+ MED_CTRL_OP_OUT => med_ctrl_op,\r
+\r
+ --Timing trigger in\r
+ TRG_TIMING_TRG_RECEIVED_IN => timing_trg_received_i,\r
+ --LVL1 trigger to FEE\r
+ LVL1_TRG_DATA_VALID_OUT => trg_data_valid_i,\r
+ LVL1_VALID_TIMING_TRG_OUT => trg_timing_valid_i,\r
+ LVL1_VALID_NOTIMING_TRG_OUT => trg_notiming_valid_i,\r
+ LVL1_INVALID_TRG_OUT => trg_invalid_i,\r
+\r
+ LVL1_TRG_TYPE_OUT => trg_type_i,\r
+ LVL1_TRG_NUMBER_OUT => trg_number_i,\r
+ LVL1_TRG_CODE_OUT => trg_code_i,\r
+ LVL1_TRG_INFORMATION_OUT => trg_information_i,\r
+ LVL1_INT_TRG_NUMBER_OUT => trg_int_number_i,\r
+\r
+ --Information about trigger handler errors\r
+ TRG_MULTIPLE_TRG_OUT => trg_multiple_trg_i,\r
+ TRG_TIMEOUT_DETECTED_OUT => trg_timeout_detected_i,\r
+ TRG_SPURIOUS_TRG_OUT => trg_spurious_trg_i,\r
+ TRG_MISSING_TMG_TRG_OUT => trg_missing_tmg_trg_i,\r
+ TRG_SPIKE_DETECTED_OUT => trg_spike_detected_i,\r
+ \r
+ --Response from FEE\r
+ FEE_TRG_RELEASE_IN(0) => fee_trg_release_i,\r
+ FEE_TRG_STATUSBITS_IN => fee_trg_statusbits_i,\r
+ FEE_DATA_IN => fee_data_i,\r
+ FEE_DATA_WRITE_IN(0) => fee_data_write_i,\r
+ FEE_DATA_FINISHED_IN(0) => fee_data_finished_i,\r
+ FEE_DATA_ALMOST_FULL_OUT(0) => fee_almost_full_i,\r
+\r
+ -- Slow Control Data Port\r
+ REGIO_COMMON_STAT_REG_IN => common_stat_reg, --0x00\r
+ REGIO_COMMON_CTRL_REG_OUT => common_ctrl_reg, --0x20\r
+ REGIO_COMMON_STAT_STROBE_OUT => common_stat_reg_strobe,\r
+ REGIO_COMMON_CTRL_STROBE_OUT => common_ctrl_reg_strobe,\r
+ REGIO_STAT_REG_IN => stat_reg, --start 0x80\r
+ REGIO_CTRL_REG_OUT => ctrl_reg, --start 0xc0\r
+ REGIO_STAT_STROBE_OUT => stat_reg_strobe,\r
+ REGIO_CTRL_STROBE_OUT => ctrl_reg_strobe,\r
+ REGIO_VAR_ENDPOINT_ID(1 downto 0) => CODE_LINE,\r
+ REGIO_VAR_ENDPOINT_ID(15 downto 2) => (others => '0'),\r
+\r
+ BUS_ADDR_OUT => regio_addr_out,\r
+ BUS_READ_ENABLE_OUT => regio_read_enable_out,\r
+ BUS_WRITE_ENABLE_OUT => regio_write_enable_out,\r
+ BUS_DATA_OUT => regio_data_out,\r
+ BUS_DATA_IN => regio_data_in,\r
+ BUS_DATAREADY_IN => regio_dataready_in,\r
+ BUS_NO_MORE_DATA_IN => regio_no_more_data_in,\r
+ BUS_WRITE_ACK_IN => regio_write_ack_in,\r
+ BUS_UNKNOWN_ADDR_IN => regio_unknown_addr_in,\r
+ BUS_TIMEOUT_OUT => regio_timeout_out,\r
+ ONEWIRE_INOUT => TEMPSENS,\r
+ ONEWIRE_MONITOR_OUT => open,\r
+\r
+ TIME_GLOBAL_OUT => global_time,\r
+ TIME_LOCAL_OUT => local_time,\r
+ TIME_SINCE_LAST_TRG_OUT => time_since_last_trg,\r
+ TIME_TICKS_OUT => timer_ticks,\r
+\r
+ STAT_DEBUG_IPU => open,\r
+ STAT_DEBUG_1 => open,\r
+ STAT_DEBUG_2 => open,\r
+ STAT_DEBUG_DATA_HANDLER_OUT => open,\r
+ STAT_DEBUG_IPU_HANDLER_OUT => open,\r
+ STAT_TRIGGER_OUT => open,\r
+ CTRL_MPLEX => (others => '0'),\r
+ IOBUF_CTRL_GEN => (others => '0'),\r
+ STAT_ONEWIRE => open,\r
+ STAT_ADDR_DEBUG => open,\r
+ DEBUG_LVL1_HANDLER_OUT => open\r
+ );\r
+\r
+ timing_trg_received_i <= TRIGGER_LEFT;\r
+---------------------------------------------------------------------------\r
+-- Bus Handler\r
+---------------------------------------------------------------------------\r
+ THE_BUS_HANDLER : trb_net16_regio_bus_handler\r
+ generic map(\r
+ PORT_NUMBER => 4,\r
+ PORT_ADDRESSES => (0 => x"d000", 1 => x"d100", 2 => x"a800", 3=>x"aa00", others => x"0000"),\r
+ PORT_ADDR_MASK => (0 => 1, 1 => 6, 2 => 9, 3=> 4, others => 0)\r
+ )\r
+ port map(\r
+ CLK => clk_100_i,\r
+ RESET => reset_i,\r
+\r
+ DAT_ADDR_IN => regio_addr_out,\r
+ DAT_DATA_IN => regio_data_out,\r
+ DAT_DATA_OUT => regio_data_in,\r
+ DAT_READ_ENABLE_IN => regio_read_enable_out,\r
+ DAT_WRITE_ENABLE_IN => regio_write_enable_out,\r
+ DAT_TIMEOUT_IN => regio_timeout_out,\r
+ DAT_DATAREADY_OUT => regio_dataready_in,\r
+ DAT_WRITE_ACK_OUT => regio_write_ack_in,\r
+ DAT_NO_MORE_DATA_OUT => regio_no_more_data_in,\r
+ DAT_UNKNOWN_ADDR_OUT => regio_unknown_addr_in,\r
+\r
+ BUS_ADDR_OUT(0*16) => spictrl_addr,\r
+ BUS_ADDR_OUT(0*16+15 downto 0*16+1) => open,\r
+ BUS_ADDR_OUT(1*16+15 downto 1*16+6) => open,\r
+ BUS_ADDR_OUT(1*16+5 downto 1*16) => spimem_addr,\r
+ BUS_ADDR_OUT(2*16+15 downto 2*16) => cbm_regio_addr_i,\r
+ BUS_ADDR_OUT(3*16+15 downto 3*16) => cbm_pgen_addr_i,\r
+ BUS_DATA_IN(0*32+31 downto 0*32) => spictrl_data_out,\r
+ BUS_DATA_IN(1*32+31 downto 1*32) => spimem_data_out,\r
+ BUS_DATA_IN(2*32+31 downto 2*32) => cbm_regio_status_data_i,\r
+ BUS_DATA_IN(3*32+31 downto 3*32) => cbm_pgen_status_data_i,\r
+ BUS_DATA_OUT(0*32+31 downto 0*32) => spictrl_data_in,\r
+ BUS_DATA_OUT(1*32+31 downto 1*32) => spimem_data_in,\r
+ BUS_DATA_OUT(2*32+31 downto 2*32) => cbm_regio_control_data_i,\r
+ BUS_DATA_OUT(3*32+31 downto 3*32) => cbm_pgen_control_data_i,\r
+ BUS_DATAREADY_IN(0) => spictrl_ack,\r
+ BUS_DATAREADY_IN(1) => spimem_ack,\r
+ BUS_DATAREADY_IN(2) => cbm_regio_dataready_i,\r
+ BUS_DATAREADY_IN(3) => cbm_pgen_dataready_i,\r
+ BUS_NO_MORE_DATA_IN(0) => spictrl_busy,\r
+ BUS_NO_MORE_DATA_IN(1) => '0',\r
+ BUS_NO_MORE_DATA_IN(2) => cbm_regio_no_more_data_i,\r
+ BUS_NO_MORE_DATA_IN(3) => cbm_pgen_no_more_data_i,\r
+ BUS_READ_ENABLE_OUT(0) => spictrl_read_en,\r
+ BUS_READ_ENABLE_OUT(1) => spimem_read_en,\r
+ BUS_READ_ENABLE_OUT(2) => cbm_regio_read_enable_i,\r
+ BUS_READ_ENABLE_OUT(3) => cbm_pgen_read_enable_i,\r
+ BUS_TIMEOUT_OUT(0) => open,\r
+ BUS_TIMEOUT_OUT(1) => open,\r
+ BUS_TIMEOUT_OUT(2) => cbm_regio_timeout_i,\r
+ BUS_TIMEOUT_OUT(3) => cbm_pgen_timeout_i,\r
+ BUS_UNKNOWN_ADDR_IN(0) => '0',\r
+ BUS_UNKNOWN_ADDR_IN(1) => '0',\r
+ BUS_UNKNOWN_ADDR_IN(2) => cbm_regio_unknown_addr_i, \r
+ BUS_UNKNOWN_ADDR_IN(3) => cbm_pgen_unknown_addr_i, \r
+ BUS_WRITE_ACK_IN(0) => spictrl_ack,\r
+ BUS_WRITE_ACK_IN(1) => spimem_ack,\r
+ BUS_WRITE_ACK_IN(2) => cbm_regio_write_ack_i,\r
+ BUS_WRITE_ACK_IN(3) => cbm_pgen_write_ack_i,\r
+ BUS_WRITE_ENABLE_OUT(0) => spictrl_write_en,\r
+ BUS_WRITE_ENABLE_OUT(1) => spimem_write_en,\r
+ BUS_WRITE_ENABLE_OUT(2) => cbm_regio_write_enable_i,\r
+ BUS_WRITE_ENABLE_OUT(3) => cbm_pgen_write_enable_i,\r
+ \r
+\r
+ \r
+ STAT_DEBUG => open\r
+ );\r
+\r
+---------------------------------------------------------------------------\r
+-- SPI / Flash\r
+---------------------------------------------------------------------------\r
+\r
+ THE_SPI_MASTER : spi_master\r
+ port map(\r
+ CLK_IN => clk_100_i,\r
+ RESET_IN => reset_i,\r
+ -- Slave bus\r
+ BUS_READ_IN => spictrl_read_en,\r
+ BUS_WRITE_IN => spictrl_write_en,\r
+ BUS_BUSY_OUT => spictrl_busy,\r
+ BUS_ACK_OUT => spictrl_ack,\r
+ BUS_ADDR_IN(0) => spictrl_addr,\r
+ BUS_DATA_IN => spictrl_data_in,\r
+ BUS_DATA_OUT => spictrl_data_out,\r
+ -- SPI connections\r
+ SPI_CS_OUT => FLASH_CS,\r
+ SPI_SDI_IN => FLASH_DOUT,\r
+ SPI_SDO_OUT => FLASH_DIN,\r
+ SPI_SCK_OUT => FLASH_CLK,\r
+ -- BRAM for read/write data\r
+ BRAM_A_OUT => spi_bram_addr,\r
+ BRAM_WR_D_IN => spi_bram_wr_d,\r
+ BRAM_RD_D_OUT => spi_bram_rd_d,\r
+ BRAM_WE_OUT => spi_bram_we,\r
+ -- Status lines\r
+ STAT => open\r
+ );\r
+\r
+-- data memory for SPI accesses\r
+ THE_SPI_MEMORY : spi_databus_memory\r
+ port map(\r
+ CLK_IN => clk_100_i,\r
+ RESET_IN => reset_i,\r
+ -- Slave bus\r
+ BUS_ADDR_IN => spimem_addr,\r
+ BUS_READ_IN => spimem_read_en,\r
+ BUS_WRITE_IN => spimem_write_en,\r
+ BUS_ACK_OUT => spimem_ack,\r
+ BUS_DATA_IN => spimem_data_in,\r
+ BUS_DATA_OUT => spimem_data_out,\r
+ -- state machine connections\r
+ BRAM_ADDR_IN => spi_bram_addr,\r
+ BRAM_WR_D_OUT => spi_bram_wr_d,\r
+ BRAM_RD_D_IN => spi_bram_rd_d,\r
+ BRAM_WE_IN => spi_bram_we,\r
+ -- Status lines\r
+ STAT => open\r
+ );\r
+\r
+---------------------------------------------------------------------------\r
+-- Reboot FPGA\r
+---------------------------------------------------------------------------\r
+ THE_FPGA_REBOOT : fpga_reboot\r
+ port map(\r
+ CLK => clk_100_i,\r
+ RESET => reset_i,\r
+ DO_REBOOT => common_ctrl_reg(15),\r
+ PROGRAMN => PROGRAMN\r
+ );\r
+\r
+\r
+\r
+---------------------------------------------------------------------------\r
+-- LED\r
+---------------------------------------------------------------------------\r
+ LED_GREEN <= not med_stat_op(9);\r
+ LED_ORANGE <= not med_stat_op(10);\r
+ LED_RED <= not time_counter(26);\r
+ LED_YELLOW <= not med_stat_op(11);\r
+\r
+-- end generate;\r
+ \r
+ TEST_LINE <= cbm_debug_i(15 downto 0);\r
+\r
end architecture;
\ No newline at end of file
jspc29 / trb3.git / commitdiff