update DAQ Control and power supplies

diff --git a/hadesoperator/daqcontrol.tex b/hadesoperator/daqcontrol.tex
index 4498e50c621c9a26e385ccdba43aae5a1cbe7010..0a0ca0b8fd9dd8c6e13c19b9cc464bff4980652a 100644 (file)
--- a/hadesoperator/daqcontrol.tex
+++ b/hadesoperator/daqcontrol.tex
@@ -20,7 +20,7 @@
 \begin{description}
  \item[CTS Mon] The monitor for CTS settings and scalers. One instance should be open for experts, but usually not needed by the operator
  \item[Hmon] Opens a browser pointed at \url{https://hades33/mon}
- \item[Epics] Opens EPICS. Only needed to open the power supply window ("crate LV"), the rest are detector expert tools
+ \item[Epics old] Opens the old "blue" EPICS. Only needed to open the power supply window ("crate LV"), the rest are detector expert tools
  \item[BNET] Opens a browser pointed at \url{https://hades33/eb} to monitor eventbuilders
  \item[DAQ Rawmon]  Opens a browser pointed at \url{https://hades33/rawmon} for low level data analysis. Expert tool
  \item[Daq VNC] This VNC is typically used by experts to remotely control the system. Not used for operating the system from the control room
@@ -30,35 +30,47 @@
 
 \subsection{Eventbuilder Tools}
 \begin{description}
- \item[Restart EB] Start eventbuilders again (with new settings or after stop)
- \item[Stop EB] Stop eventbuilders
- \item[Restart BNET N Builder] Sets the number of running instances of eventbuilders. Change only on request. E.g. 1 Builder for cosmics, 6/8 for beam data.
- \item[Start/Stop TDC CAL] Do a calibration run for TDCs. See the corresponding section of the manual
- \item[Prefix XX] Change the file prefix. 'co' for cosmics, 'be' for beam data, 'te' during breaks
+ \item[Start TDC CAL] Start process of TDC calibration
+ \item[Stop TDC CAL] Stops the TDC calibration, returns to normal data taking
+ \item[BEAM Files] Start to write "be" beam files
+ \item[COSMICS Files] Start to write "co" cosmics files
+ \item[TEST file] Start to write "te" test files without important data
+ \item[NO file] Leave eventbuilder running, but don't write data to disk
+ \item[Restart EB] Start eventbuilders again (with new settings or after stop / failure)
+ \item[Stop EB] Stop eventbuilders (not actually needed, select "NO file" instead)
+ \item[Set N EB] Sets the number of running instances of eventbuilders. Change only on request. E.g. 1 Builder for cosmics, 6/8 for beam data.
 \end{description}
 
 \subsection{Expert Tools}
 \begin{description}
  \item[MDC HighVoltageRamp]
+ \item[BLR Reinit FPGA]
+ \item[BLR Reload Settings]
  \item[CTS Scope]
- \item[ECal 5V Entrance Powercycle]
- \item[ECal LV5 Powercycle]
- \item[MDC LV Powercycle]
  \item[MDC LV Turn On All Relais]
- \item[Pexor Repair]
- \item[Reboot RICH]
+ \item[Relaod RICH]
  \item[Reload RPC Thresholds]
  \item[Restart BNET Control]
  \item[Restart Hmon] use to activate changes in main monitoring
  \item[Restart Rawdata Mon] Use if \url{https://hades33/rawmon} is not working
  \item[Restart Sequencer]
- \item[RICH Powercycle]
- \item[RICH special PwrCyc]
  \item[Set RICH HV] Switches RICH HV on if all channels are off, otherwise switches RICH HV off
  \item[Set RICH Thr] Sets thresholds in RICH to default values from file
  \item[Start Speech Output]
  \item[Stop Speech Output]
- \item[Wall Powercycle]
 \end{description}
 
-
+\subsection{Power Tools}
+\begin{description}
+ \item[Powercycle all]
+ \item[RICH Powercycle]
+ \item[RICH Fan Powercycle] Switches RICH fans on/off
+ \item[ECal 5V Entrance Powercycle]
+ \item[ECal LV5 Powercycle]
+ \item[Wall Powercycle]
+ \item[Start Powercycle]
+ \item[Hubs Powercycle]
+ \item[MDC LV Powercycle]
+ \item[RPC special PwrCyc]
+ 
+\end{description}

diff --git a/hadesoperator/expertknowledge.tex b/hadesoperator/expertknowledge.tex
new file mode 100644 (file)
index 0000000..6eb88a2
--- /dev/null
+++ b/hadesoperator/expertknowledge.tex
@@ -0,0 +1,20 @@
+
+
+\section{Power Switches and Supply control}
+\begin{description}
+\item[Pexor PC] haepcp02
+\item[White Rabbit PC] haepcp10
+\item[Forward Wall] haepcp06
+\item[RPC something] haepcp15
+\item[Start Detector TRB3] ~\\odroid1,  \verb!/dev/HAMEG_HAMEG_HO720_020546031!, \url{http://odroid1:1234}
+\item[RICH fans] ~\\odroid1,  \verb!/dev/HAMEG_HAMEG_HO720_100030280929!, \url{http://odroid1:1234}
+\item[RICH LV] See EPICS (PS devices 17 - 26)
+\item[ECAL 5V central] ~\\odroid6,   \verb!/dev/FTDI_USB_Serial_Converter_FTGZLM92!, \url{http://odroid6:1234}
+\item[ECAL 5V front-ends] ~\\odroid4,   \verb!/dev/HAMEG_HAMEG_HO720_100030271763!, \url{http://odroid4:1234} \\
+                          odroid5,   \verb!/dev/HAMEG_HAMEG_HO720_100030505473!, \url{http://odroid5:1234} \\
+                          odroid6,   \verb!/dev/HAMEG_HAMEG_HO720_100030805647!, \url{http://odroid6:1234} \\
+\item[ECAL, RPC 48V] See EPICS (PS device 11)
+\item[MDC] See EPICS group 
+\item[CTS, central Hubs] See EPICS (PS devices 3 and 16)
+\end{description}
+

diff --git a/hadesoperator/figures/DaqControl.png b/hadesoperator/figures/DaqControl.png
index f6863dd5972b3379722aca5d36a24690b5ad4485..0022dffad824c634ec3cae0b168556979d964383 100644 (file)
Binary files a/hadesoperator/figures/DaqControl.png and b/hadesoperator/figures/DaqControl.png differ

diff --git a/hadesoperator/main.tex b/hadesoperator/main.tex
index 51513c3159feb3d06e2eb0cbbf782c809f6afc08..fbe788c40ad370a4871e277aa49540485b575281 100644 (file)
--- a/hadesoperator/main.tex
+++ b/hadesoperator/main.tex
@@ -140,14 +140,8 @@
 \clearpage
 
 \part{Expert Section}
-\section{Power Supplies and Switches}
-\begin{description}
-\item[Pexor PC switch]  \url{http://haepcp02}
-\item[White Rabbit PC switch] \url{http://haepcp10}
-\item[Forward Wall switch] \url{http://haepcp06}
-\item[ECal Padiwa supply] Buttons in DAQ Control
-\item[Start supply] \url{http://odroid1:1234} (incl. RICH fans)
-\end{description}
+\input{expertknowledge}
+
 
 \section{Reprogram all FPGA}
 \begin{itemize*}