For v1.6.3, DEBUG should be enabled, but we skip using old stuff now

diff --git a/ADC/trb3_periph_adc.vhd b/ADC/trb3_periph_adc.vhd
index 208efdff4ef293d4450c456ec11959e874705e9e..5622b36dde2f075a7a054e98fd886b94ff41e3dd 100644 (file)
--- a/ADC/trb3_periph_adc.vhd
+++ b/ADC/trb3_periph_adc.vhd
@@ -585,7 +585,7 @@ LED_YELLOW <= not med_stat_op(11);
         STATUS_REG_NR  => 21,           -- Number of status regs
         TDC_VERSION => TDC_VERSION,
         CONTROL_REG_NR => TDC_CONTROL_REG_NR,  -- Number of control regs - higher than 8 check tdc_ctrl_addr
-        DEBUG          => c_NO
+        DEBUG          => c_YES
         )
       port map (
         RESET                 => reset_i,

diff --git a/ADC/trb3_periph_adc_constraints.lpf b/ADC/trb3_periph_adc_constraints.lpf
index dd0e1ec66254f1d5910d11c1d5a90a1df20dc107..0a10f0975577541da6f4233bbf585b76c7e132ea 100644 (file)
--- a/ADC/trb3_periph_adc_constraints.lpf
+++ b/ADC/trb3_periph_adc_constraints.lpf
@@ -255,8 +255,8 @@ MULTICYCLE TO CELL "THE_TDC/GEN_Channels*Channels/Channel200/SimAdderNo*FC/FF*"
 MULTICYCLE TO CELL "THE_TDC/ReferenceChannel/Channel200/SimAdderNo*FC/FF*" 4x;
 
 # only relevant when TDC debug mode is c_YES
-# MULTICYCLE TO CELL "THE_TDC/GEN_Channels*Channels/sync_q*" 4 x;
-# MULTICYCLE TO CELL "THE_TDC/ReferenceChannel/sync_q*" 4 x;
+MULTICYCLE TO CELL "THE_TDC/GEN_Channels*Channels/sync_q*" 4 x;
+MULTICYCLE TO CELL "THE_TDC/ReferenceChannel/sync_q*" 4 x;
 
 MULTICYCLE FROM CELL "THE_TDC/GEN_Channels*Channels/Channel200/RingBuffer*FIFO/FF*" TO CELL "THE_TDC/GEN_Channels*Channels/Channel200/ringBuffer_almost_full_sync*" 2x;
 MULTICYCLE FROM CELL "THE_TDC/ReferenceChannel/Channel200/RingBuffer*FIFO/FF*" TO CELL "THE_TDC/ReferenceChannel/Channel200/ringBuffer_almost_full_sync*" 2x;