--- /dev/null
+The tdc repository branch has to be set to sep17.
+
+Run
+
+$ git checkout sep17
+
+in tdc repository folder.
--- /dev/null
+../../trb3/scripts/compile.pl
\ No newline at end of file
--- /dev/null
+library ieee;
+USE IEEE.std_logic_1164.ALL;
+use ieee.numeric_std.all;
+use work.trb_net_std.all;
+
+package config is
+
+
+------------------------------------------------------------------------------
+--Begin of design configuration
+------------------------------------------------------------------------------
+
+
+--set to 0 for backplane serdes, set to 1 for SFP serdes
+ constant SERDES_NUM : integer := 1;
+
+--TDC settings
+ constant FPGA_TYPE : integer := 5; --3: ECP3, 5: ECP5
+ constant NUM_TDC_MODULES : integer range 1 to 4 := 1; -- number of tdc modules to implement
+ constant NUM_TDC_CHANNELS : integer range 1 to 65 := 33; -- number of tdc channels per module
+ constant NUM_TDC_CHANNELS_POWER2 : integer range 0 to 6 := 5; --the nearest power of two, for convenience reasons
+ constant DOUBLE_EDGE_TYPE : integer range 0 to 3 := 3; --double edge type: 0, 1, 2, 3
+ -- 0: single edge only,
+ -- 1: same channel,
+ -- 2: alternating channels,
+ -- 3: same channel with stretcher
+ constant RING_BUFFER_SIZE : integer range 0 to 7 := 7; --ring buffer size
+ -- mode: 0, 1, 2, 3, 7
+ -- size: 32, 64, 96, 128, dyn
+ constant TDC_DATA_FORMAT : integer range 0 to 3 := 0; --type of data format for the TDC
+ -- 0: Single fine time as the sum of the two transitions
+ -- 1: Double fine time, individual transitions
+ -- 13: Debug - fine time + (if 0x3ff full chain)
+ -- 14: Debug - single fine time and the ROM addresses for the two transitions
+ -- 15: Debug - complete carry chain dump
+
+ constant EVENT_BUFFER_SIZE : integer range 9 to 13 := 13; -- size of the event buffer, 2**N
+ constant EVENT_MAX_SIZE : integer := 500; --maximum event size. Must not exceed EVENT_BUFFER_SIZE/2
+
+--Runs with 120 MHz instead of 100 MHz
+ constant USE_120_MHZ : integer := c_NO;
+
+--Use sync mode, RX clock for all parts of the FPGA
+ constant USE_RXCLOCK : integer := c_NO;
+
+--Address settings
+ constant INIT_ADDRESS : std_logic_vector := x"F570";
+ constant BROADCAST_SPECIAL_ADDR : std_logic_vector;
+
+ constant INCLUDE_UART : integer := c_YES; --300 slices
+ constant INCLUDE_SPI : integer := c_YES; --300 slices
+ constant INCLUDE_LCD : integer := c_NO; --800 slices
+ constant INCLUDE_DEBUG_INTERFACE: integer := c_NO; --300 slices
+
+ --input monitor and trigger generation logic
+ constant INCLUDE_TRIGGER_LOGIC : integer := c_YES; --400 slices @32->2
+ constant INCLUDE_STATISTICS : integer := c_NO; --1300 slices, 1 RAM @32
+ constant TRIG_GEN_INPUT_NUM : integer := 32;
+ constant TRIG_GEN_OUTPUT_NUM : integer := 4;
+ constant MONITOR_INPUT_NUM : integer := 32;
+
+ constant FPGA_SIZE : string := "85KUM";
+
+------------------------------------------------------------------------------
+--End of design configuration
+------------------------------------------------------------------------------
+
+
+ type data_t is array (0 to 1023) of std_logic_vector(7 downto 0);
+ constant LCD_DATA : data_t := (others => x"00");
+
+------------------------------------------------------------------------------
+--Select settings by configuration
+------------------------------------------------------------------------------
+ type intlist_t is array(0 to 7) of integer;
+ type hw_info_t is array(0 to 7) of unsigned(31 downto 0);
+ constant HW_INFO_BASE : unsigned(31 downto 0) := x"A5000000";
+
+ constant CLOCK_FREQUENCY_ARR : intlist_t := (100,120, others => 0);
+ constant MEDIA_FREQUENCY_ARR : intlist_t := (200,240, others => 0);
+
+ --declare constants, filled in body
+ constant HARDWARE_INFO : std_logic_vector(31 downto 0);
+ constant CLOCK_FREQUENCY : integer;
+ constant MEDIA_FREQUENCY : integer;
+ constant INCLUDED_FEATURES : std_logic_vector(63 downto 0);
+
+
+end;
+
+package body config is
+--compute correct configuration mode
+
+ constant HARDWARE_INFO : std_logic_vector(31 downto 0) := std_logic_vector( HW_INFO_BASE );
+ constant CLOCK_FREQUENCY : integer := CLOCK_FREQUENCY_ARR(USE_120_MHZ);
+ constant MEDIA_FREQUENCY : integer := MEDIA_FREQUENCY_ARR(USE_120_MHZ);
+
+ constant BROADCAST_SPECIAL_ADDR : std_logic_vector := std_logic_vector(to_unsigned(132-SERDES_NUM*3,8)); --81 (SFP) or 84 (Backplane)
+
+
+function generateIncludedFeatures return std_logic_vector is
+ variable t : std_logic_vector(63 downto 0);
+ begin
+ t := (others => '0');
+ t(63 downto 56) := std_logic_vector(to_unsigned(2,8)); --table version 1
+
+ t(7 downto 0) := std_logic_vector(to_unsigned(1,8));
+ t(11 downto 8) := std_logic_vector(to_unsigned(DOUBLE_EDGE_TYPE,4));
+ t(14 downto 12) := std_logic_vector(to_unsigned(RING_BUFFER_SIZE,3));
+ t(15) := '1'; --TDC
+ t(17 downto 16) := std_logic_vector(to_unsigned(NUM_TDC_MODULES-1,2));
+
+ t(40 downto 40) := std_logic_vector(to_unsigned(INCLUDE_LCD,1));
+ t(42 downto 42) := std_logic_vector(to_unsigned(INCLUDE_SPI,1));
+ t(43 downto 43) := std_logic_vector(to_unsigned(INCLUDE_UART,1));
+ t(44 downto 44) := std_logic_vector(to_unsigned(INCLUDE_STATISTICS,1));
+ t(51 downto 48) := std_logic_vector(to_unsigned(INCLUDE_TRIGGER_LOGIC,4));
+ t(52 downto 52) := std_logic_vector(to_unsigned(USE_120_MHZ,1));
+ t(53 downto 53) := std_logic_vector(to_unsigned(USE_RXCLOCK,1));
+ t(54 downto 54) := "0";--std_logic_vector(to_unsigned(USE_EXTERNAL_CLOCK,1));
+ return t;
+ end function;
+
+ constant INCLUDED_FEATURES : std_logic_vector(63 downto 0) := generateIncludedFeatures;
+
+end package body;
--- /dev/null
+Familyname => 'ECP5UM',
+Devicename => 'LFE5UM-85F',
+Package => 'CABGA756',
+Speedgrade => '8',
+
+
+TOPNAME => "trb5sc_template",
+lm_license_file_for_synplify => "27020\@jspc29", #"27000\@lxcad01.gsi.de";
+lm_license_file_for_par => "1702\@jspc29",
+lattice_path => '/d/jspc29/lattice/diamond/3.12',
+synplify_path => '/d/jspc29/lattice/synplify/R-2020.09-SP1/',
+
+nodelist_file => '../nodelist_frankfurt.txt',
+pinout_file => 'trb5sc_tdc',
+par_options => '../par.p2t',
+
+
+#Include only necessary lpf files
+include_TDC => 1,
+include_GBE => 0,
+
+#Report settings
+firefox_open => 0,
+twr_number_of_errors => 20,
+no_ltxt2ptxt => 1, #if there is no serdes being used
--- /dev/null
+Familyname => 'ECP5UM',
+Devicename => 'LFE5UM-85F',
+Package => 'CABGA756',
+Speedgrade => '8',
+
+TOPNAME => "trb5sc_gbe_template",
+lm_license_file_for_synplify => "27000\@lxcad04.gsi.de",
+lm_license_file_for_par => "1702\@hadeb05.gsi.de",
+lattice_path => '/opt/lattice/diamond/3.12',
+synplify_path => '/opt/synplicity/P-2019.09-SP1',
+#synplify_command => "/opt/lattice/diamond/3.4_x64/bin/lin64/synpwrap -fg -options",
+#synplify_command => "/opt/synplicity/P-2019.09-SP1/bin/synplify_premier_dp",
+synplify_command => "/opt/synplicity/R-2020.09-SP1/bin/synplify_premier_dp",
+
+nodelist_file => "../nodelist_hades68.txt",
+pinout_file => 'trb5sc_tdc',
+par_options => '../par.p2t',
+
+#Include only necessary lpf files
+include_TDC => 0,
+include_GBE => 0,
+
+#Report settings
+firefox_open => 0,
+twr_number_of_errors => 20,
+no_ltxt2ptxt => 1, #if there is no serdes being used
--- /dev/null
+// nodes file for parallel place&route
+
+[jspc37]
+SYSTEM = linux
+CORENUM = 7
+ENV = /d/jspc29/lattice/310_settings.sh
+WORKDIR = /d/jspc22/trb/git/trb5sc/template/workdir
+
+[jspc57]
+SYSTEM = linux
+CORENUM = 3
+ENV = /d/jspc29/lattice/310_settings.sh
+WORKDIR = /d/jspc22/trb/git/trb5sc/template/workdir
--- /dev/null
+-w
+#-y
+-l 5
+#-m nodelist.txt # Controlled by the compile.pl script.
+#-n 1 # Controlled by the compile.pl script.
+-s 10
+-t 11
+-c 2
+-e 2
+-i 10
+#-exp parPlcInLimit=0
+#-exp parPlcInNeighborSize=1
+#General PAR Command Line Options
+# -w With this option, any files generated will overwrite existing files
+# (e.g., any .par, .pad files).
+# -y Adds the Delay Summary Report in the .par file and creates the delay
+# file (in .dly format) at the end of the par run.
+#
+#PAR Placement Command Line Options
+# -l Specifies the effort level of the design from 1 (simplest designs)
+# to 5 (most complex designs).
+# -m Multi-tasking option. Controlled by the compile.pl script.
+# -n Sets the number of iterations performed at the effort level
+# specified by the -l option. Controlled by the compile.pl script.
+# -s Save the number of best results for this run.
+# -t Start placement at the specified cost table. Default is 1.
+#
+#PAR Routing Command Line Options
+# -c Run number of cost-based cleanup passes of the router.
+# -e Run number of delay-based cleanup passes of the router on
+# completely-routed designs only.
+# -i Run a maximum number of passes, stopping earlier only if the routing
+# goes to 100 percent completion and all constraints are met.
+#
+#PAR Explorer Command Line Options
+# parCDP Enable the congestion-driven placement (CDP) algorithm. CDP is
+# compatible with all Lattice FPGA device families; however, most
+# benefit has been demonstrated with benchmarks targeted to ECP5,
+# LatticeECP2/M, LatticeECP3, and LatticeXP2 device families.
+# parCDR Enable the congestion-driven router (CDR) algorithm.
+# Congestion-driven options like parCDR and parCDP can improve
+# performance given a design with multiple congestion “hotspots.” The
+# Layer > Congestion option of the Design Planner Floorplan View can
+# help visualize routing congestion. Large congested areas may prevent
+# the options from finding a successful solution.
+# CDR is compatible with all Lattice FPGA device families however most
+# benefit has been demonstrated with benchmarks targeted to ECP5,
+# LatticeECP2/M,LatticeECP3, and LatticeXP2 device families.
+# paruseNBR NBR Router or Negotiation-based routing option. Supports all
+# FPGA device families except LatticeXP and MachXO.
+# When turned on, an alternate routing engine from the traditional
+# Rip-up-based routing selection (RBR) is used. This involves an
+# iterative routing algorithm that routes connections to achieve
+# minimum delay cost. It does so by computing the demand on each
+# routing resource and applying cost values per node. It will
+# complete when an optimal solution is arrived at or the number of
+# iterations is reached.
+# parPathBased Path-based placement option. Path-based timing driven
+# placement will yield better performance and more
+# predictable results in many cases.
+# parHold Additional hold time correction option. This option
+# forces the router to automatically insert extra wires to compensate for the
+# hold time violation.
+# parHoldLimit This option allows you to set a limit on the number of
+# hold time violations to be processed by the auto hold time correction option
+# parHold.
+# parPlcInLimit Cannot find in the online help
+# parPlcInNeighborSize Cannot find in the online help
+-exp parHold=ON:parHoldLimit=10000:parCDP=1:parCDR=1:parPathBased=OFF:paruseNBR=1
--- /dev/null
+COMMERCIAL ;
+BLOCK RESETPATHS ;
+BLOCK ASYNCPATHS ;
+BLOCK RD_DURING_WR_PATHS ;
+
+#################################################################
+# Basic Settings
+#################################################################
+
+FREQUENCY PORT "CLK_200" 200.000 MHz;
+FREQUENCY PORT "CLK_125" 125.000 MHz;
+FREQUENCY PORT "CLK_EXT" 200.000 MHz;
+
+FREQUENCY NET "GBE/physical/CLK_125_RX_OUT" 125.000 MHz;
+FREQUENCY NET "GBE/physical/gbe_serdes/tx_pclk" 125.000 MHz;
+FREQUENCY NET "clk_sys" 100.000 MHz;
+FREQUENCY NET "CLK_125_c" 125.000 MHz;
+
+BLOCK PATH TO PORT "LED*";
+BLOCK PATH TO PORT "PROGRAMN";
+BLOCK PATH TO PORT "TEST*";
+BLOCK PATH TO PORT "HDR*";
+
+#FREQUENCY NET "THE_MEDIA_INTERFACE/gen_pcs0.THE_SERDES/serdes_sync_0_inst/clk_tx_full" 200 MHz;
+#FREQUENCY NET "THE_MEDIA_INTERFACE/gen_pcs1.THE_SERDES/serdes_sync_0_inst/clk_tx_full" 200 MHz;
+# FREQUENCY NET "med_stat_debug[11]" 200 MHz;
+#FREQUENCY NET "med2int_0.clk_full" 200 MHz;
+# FREQUENCY NET THE_MEDIA_INTERFACE/clk_rx_full 200 MHz;
+#MULTICYCLE TO CELL "THE_CLOCK_RESET/THE_RESET_HANDLER/trb_reset_pulse*" 20 ns;
+#MULTICYCLE FROM CELL "THE_CLOCK_RESET/clear_n_i" 20 ns;
+#MULTICYCLE TO CELL "THE_CLOCK_RESET/THE_RESET_HANDLER/final_reset*" 30 ns;
+#MULTICYCLE FROM CELL "THE_CLOCK_RESET/THE_RESET_HANDLER/final_reset*" 30 ns;
+#MULTICYCLE TO CELL "THE_MEDIA_INTERFACE/THE_SCI_READER/PROC_SCI_CTRL.BUS_TX*" 10 ns;
+#MULTICYCLE TO CELL "THE_MEDIA_INTERFACE/THE_MED_CONTROL/THE_TX/STAT_REG_OUT*" 10 ns;
+#GSR_NET NET "clear_i";
+# LOCATE COMP "THE_MEDIA_INTERFACE/gen_pcs0.THE_SERDES/DCU0_inst" SITE "DCU0" ;
+#REGION "MEDIA" "R81C44D" 13 25;
+#LOCATE UGROUP "THE_MEDIA_INTERFACE/media_interface_group" REGION "MEDIA" ;
+
--- /dev/null
+
+# implementation: "workdir"
+impl -add workdir -type fpga
+
+# device options
+set_option -technology ECP5UM
+set_option -part LFE5UM_85F
+set_option -package BG756C
+set_option -speed_grade -8
+set_option -part_companion ""
+
+# compilation/mapping options
+set_option -default_enum_encoding sequential
+set_option -symbolic_fsm_compiler 1
+set_option -top_module "trb5sc_template"
+set_option -resource_sharing false
+
+# map options
+set_option -frequency 120
+set_option -fanout_limit 100
+set_option -disable_io_insertion 0
+set_option -retiming 1
+set_option -pipe 1
+set_option -forcegsr false
+set_option -fixgatedclocks 3
+set_option -fixgeneratedclocks 3
+set_option -compiler_compatible true
+set_option -multi_file_compilation_unit 1
+
+set_option -max_parallel_jobs 3
+#set_option -automatic_compile_point 1
+#set_option -continue_on_error 1
+set_option -resolve_multiple_driver 1
+
+# simulation options
+set_option -write_verilog 0
+set_option -write_vhdl 1
+
+# automatic place and route (vendor) options
+set_option -write_apr_constraint 0
+
+# set result format/file last
+project -result_format "edif"
+project -result_file "workdir/trb5sc_gbe_template.edf"
+set_option log_file "workdir/trb5sc_project.srf"
+#implementation attributes
+
+set_option -vlog_std v2001
+set_option -project_relative_includes 1
+impl -active "workdir"
+
+####################
+
+add_file -vhdl -lib work "workdir/lattice-diamond/cae_library/synthesis/vhdl/ecp5um.vhd"
+
+#Packages
+add_file -vhdl -lib work "workdir/version.vhd"
+add_file -vhdl -lib work "config.vhd"
+add_file -vhdl -lib work "../../trb3/base/trb3_components.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_std.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_components.vhd"
+#add_file -vhdl -lib work "tdc_release/tdc_version.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net_gbe_protocols.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net_gbe_components.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_hub_func.vhd"
+
+#Basic Infrastructure
+add_file -vhdl -lib work "../../dirich/cores/pll_240_100/pll_240_100.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb_ecp5/base/clock_reset_handler.vhd"
+add_file -vhdl -lib work "../../trbnet/special/trb_net_reset_handler.vhd"
+add_file -vhdl -lib work "../../trbnet/special/spi_flash_and_fpga_reload_record.vhd"
+add_file -vhdl -lib work "../../vhdlbasics/ecp5/sedcheck.vhd"
+
+#Fifos
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/trb_net16_fifo_arch.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/RAM/spi_dpram_32_to_8/spi_dpram_32_to_8.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/lattice_ecp5_fifo_18x1k/lattice_ecp5_fifo_18x1k.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/lattice_ecp5_fifo_16bit_dualport/lattice_ecp5_fifo_16bit_dualport.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/trb_net_fifo_16bit_bram_dualport.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/lattice_ecp2m_fifo.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/fifo_36x256_oreg/fifo_36x256_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/fifo_36x512_oreg/fifo_36x512_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/fifo_36x1k_oreg/fifo_36x1k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/fifo_36x2k_oreg/fifo_36x2k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/fifo_36x4k_oreg/fifo_36x4k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/fifo_36x8k_oreg/fifo_36x8k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/fifo_36x16k_oreg/fifo_36x16k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/fifo_36x32k_oreg/fifo_36x32k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/fifo_18x256_oreg/fifo_18x256_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/fifo_18x512_oreg/fifo_18x512_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/fifo_18x1k_oreg/fifo_18x1k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/fifo_18x2k_oreg/fifo_18x2k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/fifo_9x2k_oreg/fifo_9x2k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp2m/fifo/fifo_var_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/fifo_19x16_obuf/fifo_19x16_obuf.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/lattice_ecp5_fifo_16x16_dualport/lattice_ecp5_fifo_16x16_dualport.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/lattice_ecp5_fifo_18x16_dualport/lattice_ecp5_fifo_18x16_dualport.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp5/FIFO/lattice_ecp3_fifo_18x16_dualport_oreg/lattice_ecp3_fifo_18x16_dualport_oreg.vhd"
+
+
+#Flash & Reload, Tools
+add_file -vhdl -lib work "../../trbnet/special/slv_register.vhd"
+add_file -vhdl -lib work "../../trbnet/special/spi_master.vhd"
+add_file -vhdl -lib work "../../trbnet/special/spi_slim.vhd"
+add_file -vhdl -lib work "../../trbnet/special/spi_databus_memory.vhd"
+add_file -vhdl -lib work "../../trbnet/special/fpga_reboot.vhd"
+add_file -vhdl -lib work "../../trb3sc/code/trb3sc_tools.vhd"
+add_file -vhdl -lib work "../../trb3sc/code/lcd.vhd"
+add_file -vhdl -lib work "../../trb3sc/code/debuguart.vhd"
+add_file -vhdl -lib work "../../trbnet/special/uart.vhd"
+add_file -vhdl -lib work "../../trbnet/special/uart_rec.vhd"
+add_file -vhdl -lib work "../../trbnet/special/uart_trans.vhd"
+add_file -vhdl -lib work "../../trbnet/special/spi_ltc2600.vhd"
+add_file -vhdl -lib work "../../trbnet/optical_link/f_divider.vhd"
+add_file -vhdl -lib work "../../trb3sc/code/load_settings.vhd"
+add_file -vhdl -lib work "../../trb3sc/code/spi_master_generic.vhd"
+add_file -vhdl -lib work "../../trb3/base/code/input_to_trigger_logic_record.vhd"
+add_file -vhdl -lib work "../../trb3/base/code/input_statistics.vhd"
+
+#SlowControl files
+add_file -vhdl -lib work "../../trbnet/trb_net16_regio_bus_handler.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_regio_bus_handler_record.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_regIO.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_onewire.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_addresses.vhd"
+
+#Media interface
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/med_sync_define.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/rx_control.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/tx_control.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/rx_reset_fsm.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/tx_reset_fsm.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/sci_reader.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/med_sync_control.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/med_ecp5_sfp_sync.vhd"
+
+
+#########################################
+#channel 0, backplane
+#add_file -vhdl -lib work "../../dirich/cores/serdes_sync_0.vhd"
+#add_file -verilog -lib work "../../dirich/cores/serdes_sync_0_softlogic.v"
+
+#channel 1, SFP
+#add_file -vhdl -lib work "../cores/serdes_sync_0/serdes_sync_0.vhd"
+#add_file -verilog -lib work "../cores/serdes_sync_0/serdes_sync_0_softlogic.v"
+##########################################
+
+
+#########################################
+#channel 0, backplane
+#add_file -vhdl -lib work "../../trbnet/media_interfaces/ecp5/chan0_0/serdes_sync_0.vhd"
+
+#channel 1, SFP
+add_file -vhdl -lib work "../../trbnet/media_interfaces/ecp5/chan0_1/serdes_sync_0.vhd"
+##########################################
+
+add_file -vhdl -lib work "../../trbnet/media_interfaces/ecp5/pcs.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/ecp5/pcs2.vhd"
+add_file -verilog -lib work "../../trbnet/media_interfaces/ecp5/serdes_sync_0_softlogic.v"
+
+
+#TrbNet Endpoint
+add_file -vhdl -lib work "../../trbnet/trb_net16_term_buf.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_CRC.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_CRC8.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/rom_16x8.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/ram.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/pulse_sync.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/state_sync.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/ram_16x8_dp.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/ram_16x16_dp.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/ram_dp.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_term.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_sbuf.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_sbuf5.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_sbuf6.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_sbuf.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_priority_encoder.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_dummy_fifo.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_dummy_fifo.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_term_ibuf.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_priority_arbiter.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_pattern_gen.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_obuf_nodata.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_obuf.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_ibuf.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_api_base.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_iobuf.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_io_multiplexer.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_trigger.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_ipudata.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_endpoint_hades_full.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_endpoint_hades_full_gbe.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/signal_sync.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/ram_dp_rw.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/pulse_stretch.vhd"
+
+add_file -vhdl -lib work "../../trbnet/special/handler_lvl1.vhd"
+add_file -vhdl -lib work "../../trbnet/special/handler_data.vhd"
+add_file -vhdl -lib work "../../trbnet/special/handler_ipu.vhd"
+add_file -vhdl -lib work "../../trbnet/special/handler_trigger_and_data.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_endpoint_hades_full_handler_record.vhd"
+add_file -vhdl -lib work "../../trbnet/special/bus_register_handler.vhd"
+
+add_file -vhdl -lib work "../../trbnet/special/trb_net_i2cwire.vhd"
+add_file -vhdl -lib work "../../vhdlbasics/interface/i2c_gstart.vhd"
+add_file -vhdl -lib work "../../vhdlbasics/interface/i2c_sendb.vhd"
+add_file -vhdl -lib work "../../vhdlbasics/interface/i2c_slim.vhd"
+
+
+#add_file -vhdl -lib work "tdc_release/tdc_components.vhd"
+#add_file -vhdl -lib work "tdc_release/bit_sync.vhd"
+#add_file -vhdl -lib work "tdc_release/BusHandler_record.vhd"
+#add_file -vhdl -lib work "tdc_release/Channel_200.vhd"
+#add_file -vhdl -lib work "tdc_release/Channel.vhd"
+#add_file -vhdl -lib work "tdc_release/Encoder_288_Bit.vhd"
+#add_file -vhdl -lib work "tdc_release/fallingEdgeDetect.vhd"
+#add_file -vhdl -lib work "tdc_release/hit_mux.vhd"
+#add_file -vhdl -lib work "tdc_release/LogicAnalyser.vhd"
+#add_file -vhdl -lib work "tdc_release/Readout_record.vhd"
+#add_file -vhdl -lib work "tdc_release/risingEdgeDetect.vhd"
+#add_file -vhdl -lib work "tdc_release/ROM_encoder_ecp5.vhd"
+#add_file -vhdl -lib work "tdc_release/ShiftRegisterSISO.vhd"
+#add_file -vhdl -lib work "tdc_release/Stretcher_A.vhd"
+#add_file -vhdl -lib work "tdc_release/Stretcher_B.vhd"
+#add_file -vhdl -lib work "tdc_release/Stretcher.vhd"
+#add_file -vhdl -lib work "tdc_release/TDC_record.vhd"
+#add_file -vhdl -lib work "tdc_release/TriggerHandler.vhd"
+#add_file -vhdl -lib work "tdc_release/up_counter.vhd"
+
+#add_file -vhdl -lib work "../../tdc/base/cores/ecp5/TDC/Adder_288/Adder_288.vhd"
+#add_file -vhdl -lib work "../../tdc/base/cores/ecp5/FIFO/FIFO_DC_36x128_DynThr_OutReg/FIFO_DC_36x128_DynThr_OutReg.vhd"
+#add_file -vhdl -lib work "../../tdc/base/cores/ecp5/FIFO/FIFO_DC_36x128_OutReg/FIFO_DC_36x128_OutReg.vhd"
+#add_file -vhdl -lib work "../../tdc/base/cores/ecp5/FIFO/FIFO_DC_36x64_OutReg/FIFO_DC_36x64_OutReg.vhd"
+#add_file -vhdl -lib work "../../tdc/base/cores/ecp5/FIFO/FIFO_DC_36x32_OutReg/FIFO_DC_36x32_OutReg.vhd"
+#add_file -vhdl -lib work "../../tdc/base/cores/ecp5/FIFO/FIFO_36x128_OutReg/FIFO_36x128_OutReg.vhd"
+#add_file -vhdl -lib work "../../tdc/base/cores/ecp5/FIFO/FIFO_36x64_OutReg/FIFO_36x64_OutReg.vhd"
+#add_file -vhdl -lib work "../../tdc/base/cores/ecp5/FIFO/FIFO_36x32_OutReg/FIFO_36x32_OutReg.vhd"
+#add_file -vhdl -lib work "../../tdc/base/cores/ecp5/PLL/pll_in125_out50/pll_in125_out50.vhd"
+#add_file -vhdl -lib work "../../tdc/base/cores/ecp5/PLL/pll_in3125_out50/pll_in3125_out50.vhd"
+
+#GbE
+add_file -vhdl -lib work "../../trbnet/gbe_trb_ecp5/base/gbe_wrapper_single.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/gbe_logic_wrapper.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb_ecp5/base/gbe_med_interface_single.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/gbe_ipu_multiplexer.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/gbe_ipu_dummy.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_type_validator.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_frame_receiver.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_receive_control.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_main_control.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_mac_control.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_protocol_prioritizer.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_protocol_selector.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_frame_trans.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_frame_constr.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_transmit_control2.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_ipu_interface.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_event_constr.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_setup.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/ip_configurator.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/protocols/trb_net16_gbe_response_constructor_ARP.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/protocols/trb_net16_gbe_response_constructor_Ping.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/protocols/trb_net16_gbe_response_constructor_DHCP.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/protocols/trb_net16_gbe_response_constructor_SCTRL.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/protocols/trb_net16_gbe_response_constructor_TrbNetData.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/protocols/trb_net16_gbe_response_constructor_KillPing.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/protocols/trb_net16_gbe_response_constructor_Forward.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/main_rx_reset_RS.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/main_tx_reset_RS.vhd"
+add_file -verilog -lib work "../../trbnet/gbe_trb_ecp5/media/ecp5/serdes_gbe_softlogic.v"
+# Choose your SerDes location here
+#add_file -vhdl -lib work "../../trbnet/gbe_trb_ecp5/media/ecp5/d0ch0/serdes_gbe.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb_ecp5/media/ecp5/d0ch1/serdes_gbe.vhd"
+#add_file -vhdl -lib work "../../trbnet/gbe_trb_ecp5/media/ecp5/d1ch0/serdes_gbe.vhd"
+#add_file -vhdl -lib work "../../trbnet/gbe_trb_ecp5/media/ecp5/d1ch1/serdes_gbe.vhd"
+
+#add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_8kx9.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_4096x9.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_512x32.vhd"
+#add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_512x32x8.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_512x72.vhd"
+#add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_64kx9.vhd"
+#add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_64kx9_af.vhd"
+#add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_32kx16x8_mb2.vhd"
+#add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_2048x8x16.vhd"
+#add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_65536x18x9.vhd"
+#add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/slv_mac_memory.vhd"
+#add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/ip_mem.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_64kx18x9_wcnt.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_32kx18x9_wcnt.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_64kx9_af_cnt.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_8kx9_af_cnt.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_2kx9x18_wcnt.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp5/fifo_4kx18x9_wcnt.vhd"
+
+add_file -vhdl -lib work "./trb5sc_gbe_template.vhd"
+#add_file -fpga_constraint "./synplify.fdc"
+
+
+
--- /dev/null
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.numeric_std.all;
+
+library work;
+use work.version.all;
+use work.config.all;
+use work.trb_net_std.all;
+use work.trb_net_components.all;
+use work.trb3_components.all;
+use work.med_sync_define.all;
+
+entity trb5sc_template is
+ port(
+ CLK_200 : in std_logic;
+ CLK_125 : in std_logic;
+ CLK_EXT : in std_logic;
+ --
+ TRIG_IN_BACKPL : in std_logic; --Reference Time
+ TRIG_IN_RJ45 : in std_logic; --Reference Time
+ IN_SELECT_EXT_CLOCK : in std_logic;
+ --
+ SPARE : out std_logic_vector(1 downto 0); -- trigger output 2+3
+ BACK_GPIO : inout std_logic_vector(3 downto 0); --0: Serdes out, 1: Serdes in, 2,3: trigger output 0+1
+ --
+ SFP_TX_DIS : out std_logic;
+ SFP_LOS : in std_logic;
+ SFP_MOD_0 : in std_logic;
+ --AddOn
+-- FE_GPIO : inout std_logic_vector(11 downto 0);
+-- FE_CLK : out std_logic_vector( 2 downto 1);
+-- FE_DIFF : inout std_logic_vector(63 downto 0);
+ INP : in std_logic_vector(63 downto 0);
+ --
+ CS : out std_logic_vector(4 downto 1);
+ MISO : in std_logic_vector(4 downto 1);
+ MOSI : out std_logic;
+ SCK : out std_logic;
+ --ADC
+ ADC_SCLK : out std_logic;
+ ADC_NCS : out std_logic;
+ ADC_MOSI : out std_logic;
+ ADC_MISO : in std_logic;
+ --Flash, Reload
+ FLASH_SCLK : out std_logic;
+ FLASH_NCS : out std_logic;
+ FLASH_MOSI : out std_logic;
+ FLASH_MISO : in std_logic;
+ FLASH_HOLD : out std_logic;
+ FLASH_WP : out std_logic;
+ PROGRAMN : out std_logic;
+ --I2C
+ I2C_SDA : inout std_logic;
+ I2C_SCL : inout std_logic;
+ TMP_ALERT : in std_logic;
+ --LED
+ LED : out std_logic_vector(8 downto 1);
+ LED_SFP_YELLOW : out std_logic;
+ LED_SFP_GREEN : out std_logic;
+ LED_SFP_RED : out std_logic;
+ LED_RJ_GREEN : out std_logic_vector(1 downto 0);
+ LED_RJ_RED : out std_logic_vector(1 downto 0);
+ LED_EXT_CLOCK : out std_logic;
+ --Other Connectors
+ TEST : inout std_logic_vector(14 downto 1);
+ HDR_IO : inout std_logic_vector(15 downto 0)
+ );
+
+
+ attribute syn_useioff : boolean;
+ attribute syn_useioff of FLASH_NCS : signal is true;
+ attribute syn_useioff of FLASH_SCLK : signal is true;
+ attribute syn_useioff of FLASH_MOSI : signal is true;
+ attribute syn_useioff of FLASH_MISO : signal is true;
+
+
+end entity;
+
+architecture arch of trb5sc_template is
+ attribute syn_keep : boolean;
+ attribute syn_preserve : boolean;
+
+ signal clk_sys : std_logic;
+ signal clk_full : std_logic;
+ signal clk_full_osc : std_logic;
+ signal GSR_N : std_logic;
+ signal reset_i : std_logic;
+ signal clear_i : std_logic;
+
+ signal sd_led_green : std_logic;
+ signal sd_led_red : std_logic;
+ signal sd_led_yellow : std_logic;
+
+ signal uuid_i : std_logic_vector(63 downto 0);
+
+ signal gsc_init_data : std_logic_vector(15 downto 0);
+ signal gsc_reply_data : std_logic_vector(15 downto 0);
+ signal gsc_init_read : std_logic;
+ signal gsc_reply_read : std_logic;
+ signal gsc_init_dataready : std_logic;
+ signal gsc_reply_dataready : std_logic;
+ signal gsc_init_packet_num : std_logic_vector(2 downto 0);
+ signal gsc_reply_packet_num : std_logic_vector(2 downto 0);
+ signal gsc_busy : std_logic;
+
+ signal reboot_from_gbe : std_logic;
+ signal reset_via_gbe : std_logic;
+
+ attribute syn_keep of GSR_N : signal is true;
+ attribute syn_preserve of GSR_N : signal is true;
+
+ signal debug : std_logic_vector(127 downto 0);
+
+ signal status : std_logic_vector(15 downto 0);
+
+ signal flash_ncs_i : std_logic;
+
+
+begin
+
+---------------------------------------------------------------------------
+-- Clock & Reset Handling
+---------------------------------------------------------------------------
+ THE_CLOCK_RESET : entity work.clock_reset_handler
+ port map(
+ CLOCK_IN => CLK_200,
+ GLOBAL_RESET_IN => '0',
+ RESET_OUT => reset_i,
+ CLEAR_OUT => clear_i,
+ GSR_OUT => GSR_N,
+ REF_CLK_OUT => clk_full,
+ SYS_CLK_OUT => clk_sys,
+ RAW_CLK_OUT => clk_full_osc,
+ DEBUG_OUT => open
+ );
+
+-------------------------------------------------------------------------------
+-- UUID handling, needed as MAC for GbE
+-------------------------------------------------------------------------------
+ THE_UUID_STUFF: trb_net_i2cwire
+ generic map(
+ USE_TEMPERATURE_READOUT => 1,
+ CLK_PERIOD => 10
+ )
+ port map(
+ CLK => clk_sys,
+ RESET => clear_i,
+ READOUT_ENABLE_IN => '1',
+ --connection to I2C interface
+ SCL_INOUT => I2C_SCL,
+ SDA_INOUT => I2C_SDA,
+ --connection to id ram, according to memory map in TrbNetRegIO
+ DATA_OUT => open,
+ ADDR_OUT => open,
+ WRITE_OUT => open,
+ TEMP_OUT => open,
+ ID_OUT => uuid_i,
+ STAT => open
+ );
+
+---------------------------------------------------------------------------
+-- GbE
+---------------------------------------------------------------------------
+ GBE : entity work.gbe_wrapper_single
+ generic map(
+ DO_SIMULATION => 0,
+ INCLUDE_DEBUG => 0,
+ USE_INTERNAL_TRBNET_DUMMY => 0,
+ USE_EXTERNAL_TRBNET_DUMMY => 0,
+ RX_PATH_ENABLE => 1,
+ FIXED_SIZE_MODE => 1,
+ INCREMENTAL_MODE => 1,
+ FIXED_SIZE => 100,
+ FIXED_DELAY_MODE => 1,
+ UP_DOWN_MODE => 0,
+ UP_DOWN_LIMIT => 100,
+ FIXED_DELAY => 100,
+
+ NUMBER_OF_GBE_LINKS => 1,
+ LINKS_ACTIVE => "0001",
+
+ LINK_HAS_READOUT => "0000",
+ LINK_HAS_SLOWCTRL => "0001",
+ LINK_HAS_DHCP => "0001",
+ LINK_HAS_ARP => "0001",
+ LINK_HAS_PING => "0001",
+ LINK_HAS_FWD => "0000"
+ )
+ port map(
+ CLK_SYS_IN => clk_sys,
+ CLK_125_IN => CLK_125,
+ RESET => reset_i,
+ GSR_N => GSR_N,
+ -- Trigger
+ TRIGGER_IN => '0',
+ -- SFP
+ SD_PRSNT_N_IN => SFP_MOD_0,
+ SD_LOS_IN => SFP_LOS,
+ SD_TXDIS_OUT => SFP_TX_DIS,
+ -- trigger channel
+ -- only for LINK_HAS_READOUT
+ CTS_NUMBER_IN => (others => '0'),
+ CTS_CODE_IN => (others => '0'),
+ CTS_INFORMATION_IN => (others => '0'),
+ CTS_READOUT_TYPE_IN => (others => '0'),
+ CTS_START_READOUT_IN => '0',
+ CTS_DATA_OUT => open,
+ CTS_DATAREADY_OUT => open,
+ CTS_READOUT_FINISHED_OUT => open,
+ CTS_READ_IN => '1',
+ CTS_LENGTH_OUT => open,
+ CTS_ERROR_PATTERN_OUT => open,
+ -- data channel
+ -- only for LINK_HAS_READOUT
+ FEE_DATA_IN => (others => '0'),
+ FEE_DATAREADY_IN => '0',
+ FEE_READ_OUT => open,
+ FEE_STATUS_BITS_IN => (others => '0'),
+ FEE_BUSY_IN => '0',
+ -- unique adresses
+ MC_UNIQUE_ID_IN => uuid_i,
+ MY_TRBNET_ADDRESS_IN => x"d00f",
+ ISSUE_REBOOT_OUT => reboot_from_gbe,
+ -- slow control by GbE
+ GSC_CLK_IN => clk_sys,
+ GSC_INIT_DATAREADY_OUT => open,
+ GSC_INIT_DATA_OUT => open,
+ GSC_INIT_PACKET_NUM_OUT => open,
+ GSC_INIT_READ_IN => '0',
+ GSC_REPLY_DATAREADY_IN => '0',
+ GSC_REPLY_DATA_IN => (others => '0'),
+ GSC_REPLY_PACKET_NUM_IN => (others => '0'),
+ GSC_REPLY_READ_OUT => open,
+ GSC_BUSY_IN => '0',
+ -- readout
+ BUS_IP_RX => open,
+ BUS_IP_TX => open,
+ BUS_REG_RX => open,
+ BUS_REG_TX => open,
+ -- Forwarder
+ FWD_DST_MAC_IN => (others => '0'),
+ FWD_DST_IP_IN => (others => '0'),
+ FWD_DST_UDP_IN => (others => '0'),
+ FWD_DATA_IN => (others => '0'),
+ FWD_DATA_VALID_IN => '0',
+ FWD_SOP_IN => '0',
+ FWD_EOP_IN => '0',
+ FWD_READY_OUT => open,
+ FWD_FULL_OUT => open,
+ -- reset
+ MAKE_RESET_OUT => reset_via_gbe, -- reset by GbE
+ -- debug and status
+ STATUS_OUT => status, --open,
+ DEBUG_OUT => debug --open
+ );
+
+---------------------------------------------------------------------------
+-- I/Os
+---------------------------------------------------------------------------
+ --HDR_IO(15 downto 0) <= (others => '0');
+ HDR_IO <= debug(15 downto 0);
+
+ TEST(13 downto 2) <= (others => '0');
+ TEST(1) <= reset_via_gbe; -- to keep things in place
+ TEST(14) <= flash_ncs_i;
+ FLASH_NCS <= flash_ncs_i;
+
+ flash_ncs_i <= '1';
+
+ FLASH_SCLK <= '0';
+ FLASH_MOSI <= '0';
+ FLASH_HOLD <= '0';
+ FLASH_WP <= '1';
+ PROGRAMN <= '1';
+
+---------------------------------------------------------------------------
+-- LED
+---------------------------------------------------------------------------
+ LED_SFP_GREEN <= not (status(0) and status(1) and status(2)); --'0';
+ LED_SFP_YELLOW <= not '0';
+ LED_SFP_RED <= not (status(3) or status(4)); --'0';
+ LED(8) <= not status(8); --'0';
+ LED(7) <= not '0';
+ LED(6) <= not '0';
+ LED(5) <= not '0';
+ LED(4) <= not '0';
+ LED(3) <= not status(2); --'0'; -- AN_COMPLETE
+ LED(2) <= not status(1); --'0'; -- LRR
+ LED(1) <= not status(0); --'0'; -- LTR
+ LED_RJ_GREEN <= "00";
+ LED_RJ_RED <= "11";
+ LED_EXT_CLOCK <= IN_SELECT_EXT_CLOCK;
+
+end architecture;
+
+
+
jspc29 / trb5sc.git / commitdiff