\setlength{\titleblockheight}{35mm}
\begin{document}
-\title{Update of the CBM MVD simulation model\thanks{Work supported by BMBF (05P12RFFC7), EU-FP7 HardronPhysics3, HIC for FAIR and GSI}}
+\title{Status of the CBM MVD simulation model\thanks{Work supported by BMBF (05P12RFFC7), HIC for FAIR and GSI}}
\author[1]{S. Amar-Youcef}
+\author[1]{M. Deveaux}
\author[1]{E. Krebs}
\author[1]{B. Linnik}
\author[1]{B. Milanovic}
\end{thebibliography}
-\clearpage
-
-
-You are invited to submit a contribution to the GSI Scientific Report 2014 which will appear early in 2015 on the GSI web sites.
-
-The use of the LaTeX style file and template, which you will find under the following link
-http://indico.gsi.de/event/sr-2014, is mandatory and the style file must not be changed.
-Any other file formats cannot be accepted. Please, do not insert other latex packages into the template or define own commands.
-
-Each submitter should upload a zip file with her or his SR-GSI-2014.tex file, all eps(!)-figures, and if available the Postscript or PDF file. For questions please contact (sr-2014@gsi.de or +496159 71-2610).
-
-Thank you for supporting the GSI Scientific Report!
-
-\subsection{Author list}
-The name of the submitting or primary author should be first,
-followed by the co-authors, alphabetically by affiliation. Please use the
-predefined commands 'authors' and 'affil'. In case of a contribution for a collaboration
-you have to give at least one person name as contact followed by the collaboration name entry.
-If you have a very long title or authors' list, you can changed the length titleblockheight.
-
-\subsection{Section headings}
-Section headings should not be numbered.
-
-\subsection{Paragraph text}
-Paragraphs ...
-
-\subsection{Equations}
-If a displayed equation needs a number, place it flush with the right margin of the column
-(see ~\ref{eq:units}). Units should be written using the roman font, not the italic font.
-
-\begin{equation}\label{eq:units}
-C_B={q^3\frac 3\epsilon_{0} mc}=3.54\,\hbox{$\mu$eV/T}
-\end{equation}
-
-\begin{figure}[htb]
-\centering
-%\includegraphics*[width=65mm]{gsisr1}
-% \includegraphics*[width=82mm]{gsisr1} % NO image path is allowed % only EPS images
-\caption{My example picture.}
-\label{l2ea4-f1}
-\end{figure}
-
-\begin{figure*}[tb]
-\centering
-%\includegraphics*[width=145mm]{gsisr2}
-% \includegraphics*[width=170mm]{gsisr2}
-\caption{Image two displayed as full-width figure.} % NO image path is allowed % only EPS images
-\label{l2ea4-f2}
-\end{figure*}
-
-\subsection{Information to figures}
-In the case of the articles are printed in black and white your related text should
-be still understandable without any colour information. E. g. use instead of "the red curve"
-use the term "the dashed curve".
-
-The resolution of your eps figures should be about 300 DPI, and your eps figures
-should also be printable in an acceptable time for the Internet version.
-
-\subsection{References}
-All bibliographical and web references should be numbered and listed at the end of the
-paper. When referring to a reference in the text, place the corresponding
-reference number in square brackets [3]. Do not use bibliographies etc. No linked link are allowed in the references.
-
-\subsection{Footnotes}
-
-Footnotes on the title and author lines may be used for acknowledgements,
-grant information, affiliations and e-mail addresses. A nonnumeric sequence of characters
-(*, \dag, \ddag, \S) should be used. All other footnotes should be included in
-the reference section and use the normal numeric sequencing.
-
-\section{Page numbers}
-
-\textbf{DO NOT include any page numbers.} The editorial staff will add them
-when they produce the final proceedings.
-
-\section{Checklist for electronic publication}
-
-\begin{Itemize}
-\item Check if all template text is exchanged with your own text.
-\item Check the upper and lower cases in your headings.
-\item Check you do not used linked links.
-\item All images are in the eps format.
-\item Use only the fonts of this template and Symbol fonts for
- text - 10 pt minimum.
-\item Text in figures should also be in the fonts of this template and
- Symbol fonts whenever possible - 6pt minimum.
-\item Check that there are no page numbers.
-\item Check the size of all your files - an average size should be about
- 800--2000 KByte. If the file size is over 4~MByte, you have to make it
- smaller.
-\end{Itemize}
-
-\begin{thebibliography}{9} % Use for 1-9 references
-%\begin{thebibliography}{99} % Use for 10-99 references
-
-\bibitem{}
-C. Petit-Jean-Genaz and J. Poole, ``JACoW, A service to the Accelerator Community'',
-EPAC'04, July 2004, Lucerne, p.~249, http://www.JACoW.org [Be aware: linked links are NOT allowed!]
-
-\bibitem{}
-A. Name and the XY collaboration, ``Contibution of last year'', GSI Scientific Report 2012
-(2013) 56
-
-\bibitem{}
-A.N. Other, ``A Very Interesting Paper'', EPAC'96, Sitges, June 1996, p. 7984
-
-
-\end{thebibliography}
-
-
\end{document}
jspc29 / reports.git / commitdiff