add drawing of SFP numbers on TRB3sc

diff --git a/trb3/Trb3scBasics.tex b/trb3/Trb3scBasics.tex
index be4f9fc74dbdb095273d4b22c304a52786c1d054..1734c72694600b04918e2209d2d05a87bc2e876c 100644 (file)
--- a/trb3/Trb3scBasics.tex
+++ b/trb3/Trb3scBasics.tex
@@ -6,7 +6,13 @@
       \end{center}
    \end{figure}
    
-   
+   \begin{figure}
+      \begin{center}
+         \includegraphics[width=0.4\textwidth]{figures/Trb3scSFPNumbers.png}
+         \caption[Trb3sc SFP Numbering]{If the TRB3sc is used with SFP AddOn, these are the numbers of the SFPs as seen by the hub.}
+         \label{fig:trb3scsfpnumbers}
+      \end{center}
+   \end{figure}   
 \subsubsection{Powering Schemes}
 \begin{description*}
   \item[External 5V] Connect a 1.5A power supply with not more than 5.5V to the black 3pin input.
@@ -129,4 +135,4 @@ On the backplane, the AC coupling of the trigger signals needs to be removed as
 \begin{description*}
   \item [C21, C22, C24, C25] Replace by 0R (AC coupling for trigger signals)
   \item [R8, R9, R10, R11] Replace by proper 100 Ohm termination (AC coupling for trigger signals)
-\end{description*}
\ No newline at end of file
+\end{description*}

diff --git a/trb3/figures/Trb3scSFPNumbers.png b/trb3/figures/Trb3scSFPNumbers.png
new file mode 100644 (file)
index 0000000..888adf4
Binary files /dev/null and b/trb3/figures/Trb3scSFPNumbers.png differ