--- /dev/null
+library ieee;
+USE IEEE.std_logic_1164.ALL;
+use ieee.numeric_std.all;
+use work.trb_net_std.all;
+use work.trb_net16_hub_func.all;
+
+package config is
+
+
+------------------------------------------------------------------------------
+--Begin of design configuration
+------------------------------------------------------------------------------
+
+--design options: backplane or front SFP, with or without GBE
+ constant USE_BACKPLANE : integer := c_NO;
+ constant USE_ADDON : integer := c_NO;
+ constant INCLUDE_GBE : integer := c_YES; --c_NO doesn't work
+
+--Runs with 120 MHz instead of 100 MHz
+ constant USE_120_MHZ : integer := c_NO;
+ constant USE_EXTERNAL_CLOCK : integer := c_YES; --'no' not implemented.
+ constant CLOCK_FAST_SELECT : integer := c_YES; --fast clock select (135us) or slow (280ms)?
+
+--Use sync mode, RX clock for all parts of the FPGA
+ constant USE_RXCLOCK : integer := c_NO;
+
+--Address settings
+ constant INIT_ADDRESS : std_logic_vector := x"F3C0";
+ constant BROADCAST_SPECIAL_ADDR : std_logic_vector := x"61";
+
+
+ constant INCLUDE_UART : integer := c_YES;
+ constant INCLUDE_SPI : integer := c_YES;
+ constant INCLUDE_LCD : integer := c_NO;
+ constant INCLUDE_DEBUG_INTERFACE: integer := c_YES;
+
+ --input monitor and trigger generation logic
+ constant INCLUDE_TRIGGER_LOGIC : integer := c_NO;
+ constant INCLUDE_STATISTICS : integer := c_YES;
+ constant TRIG_GEN_INPUT_NUM : integer := 0;
+ constant TRIG_GEN_OUTPUT_NUM : integer := 0;
+ constant MONITOR_INPUT_NUM : integer := 32;
+
+
+ constant INCLUDE_TDC : integer range c_NO to c_YES := c_NO;
+ constant TDC_CHANNEL_NUMBER : integer := 5;
+ constant DOUBLE_EDGE_TYPE : integer range 0 to 3 := 0; --double edge type: 0, 1, 2, 3
+ -- 0: single edge only,
+ -- 1: same channel,
+ -- 2: alternating channels,
+ -- 3: same channel with stretcher
+ constant RING_BUFFER_SIZE : integer range 0 to 7 := 7; --ring buffer size: 0, 1, 2, 3, 7
+ --ring buffer size: 32,64,96,128,dyn
+
+
+
+ constant GEN_BUSY_OUTPUT : integer := c_NO;
+
+ constant TRIGGER_COIN_COUNT : integer := 1;
+ constant TRIGGER_PULSER_COUNT : integer := 3;
+ constant TRIGGER_RAND_PULSER : integer := 1;
+ constant TRIGGER_ADDON_COUNT : integer := 2;
+ constant PERIPH_TRIGGER_COUNT : integer := 0;
+ constant ADDON_LINE_COUNT : integer := 18;
+ constant CTS_OUTPUT_MULTIPLEXERS : integer := 1;
+--TODO:
+-- constant INCLUDE_MBS_MASTER : integer range c_NO to c_YES := c_NO;
+-- constant INCLUDE_TIMESTAMP_GENERATOR : integer := c_NO;
+--Which external trigger module (ETM) to use?
+-- constant INCLUDE_ETM : integer range c_NO to c_YES := c_NO;
+-- type ETM_CHOICE_type is (ETM_CHOICE_MBS_VULOM, ETM_CHOICE_MAINZ_A2, ETM_CHOICE_CBMNET, ETM_CHOICE_M26);
+-- constant ETM_CHOICE : ETM_CHOICE_type := ETM_CHOICE_MBS_VULOM;
+-- constant ETM_ID : std_logic_vector(7 downto 0);
+
+
+
+
+------------------------------------------------------------------------------
+--End of design configuration
+------------------------------------------------------------------------------
+
+ type data_t is array (0 to 1023) of std_logic_vector(7 downto 0);
+ constant LCD_DATA : data_t := (
+ x"36",x"48",x"3A",x"55",x"29",x"2A",x"00",x"00", --config don't touch
+ x"00",x"EF",x"2B",x"00",x"00",x"01",x"3F",x"2C", --config don't touch
+ x"00",x"00",x"00",x"00",x"00",x"00",x"00",x"00", --config don't touch
+ x"00",x"00",x"00",x"00",x"00",x"00",x"00",x"00", --config don't touch
+
+ x"48", x"75", x"62", x"41", x"64", x"64", x"4f", x"6e", x"0a",
+ x"0a",
+ x"41", x"64", x"64", x"72", x"65", x"73", x"73", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"80", x"0a",
+ x"43", x"6f", x"6d", x"70", x"69", x"6c", x"65", x"54", x"69", x"6d", x"65", x"20", x"20", x"84", x"83", x"0a",
+ x"54", x"69", x"6d", x"65", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"82", x"81", x"0a",
+ others => x"00");
+
+
+ type hub_mii_t is array(0 to 3) of integer;
+ type hub_ct is array(0 to 16) of integer;
+ type hub_cfg_t is array(0 to 3) of hub_ct;
+ type hw_info_t is array(0 to 3) of std_logic_vector(31 downto 0);
+ type intlist_t is array(0 to 7) of integer;
+
+ --Order:
+ -- no backplane, 4x AddOn, 1x SFP, 1x GBE
+ -- no backplane, 8x AddOn, 1x SFP, 1x GBE
+ -- backplane, 9x backplane, 1x GBE
+
+ constant INTERFACE_NUM_ARR : hub_mii_t := (1,9,10,0);
+-- 0 1 2 3 4 5 6 7 8 9 a b c d e f
+ constant IS_UPLINK_ARR : hub_cfg_t := ((0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0));
+ constant IS_DOWNLINK_ARR : hub_cfg_t := ((1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0),
+ (1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0),
+ (1,1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0));
+ constant IS_UPLINK_ONLY_ARR : hub_cfg_t := ((0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0));
+
+ constant INTERFACE_NUM : integer;
+ constant IS_UPLINK : hub_ct;
+ constant IS_DOWNLINK : hub_ct;
+ constant IS_UPLINK_ONLY : hub_ct;
+
+------------------------------------------------------------------------------
+--Select settings by configuration
+------------------------------------------------------------------------------
+ constant cts_rdo_additional_ports : integer := 1;
+
+ constant HW_INFO_BASE : unsigned(31 downto 0) := x"9500A000";
+
+ constant CLOCK_FREQUENCY_ARR : intlist_t := (100,120, others => 0);
+ constant MEDIA_FREQUENCY_ARR : intlist_t := (200,240, others => 0);
+
+ --declare constants, filled in body
+ constant HARDWARE_INFO : std_logic_vector(31 downto 0);
+ constant CLOCK_FREQUENCY : integer;
+ constant MEDIA_FREQUENCY : integer;
+ constant INCLUDED_FEATURES : std_logic_vector(63 downto 0);
+
+
+end;
+
+package body config is
+--compute correct configuration mode
+
+ constant HARDWARE_INFO : std_logic_vector(31 downto 0) := std_logic_vector(
+ HW_INFO_BASE );
+ constant CLOCK_FREQUENCY : integer := CLOCK_FREQUENCY_ARR(USE_120_MHZ);
+ constant MEDIA_FREQUENCY : integer := MEDIA_FREQUENCY_ARR(USE_120_MHZ);
+
+ constant CFG_MODE : integer := USE_ADDON*2 + USE_BACKPLANE;
+
+ constant INTERFACE_NUM : integer := INTERFACE_NUM_ARR(CFG_MODE);
+ constant IS_UPLINK : hub_ct := IS_UPLINK_ARR(CFG_MODE);
+ constant IS_DOWNLINK : hub_ct := IS_DOWNLINK_ARR(CFG_MODE);
+ constant IS_UPLINK_ONLY : hub_ct := IS_UPLINK_ONLY_ARR(CFG_MODE);
+
+-- function etm_id_func return std_logic_vector is
+-- variable res : unsigned(7 downto 0);
+-- begin
+-- res := x"00";
+-- if INCLUDE_ETM=c_YES then
+-- res := x"60";
+-- res := res + TO_UNSIGNED(ETM_CHOICE_type'pos(ETM_CHOICE), 4);
+-- end if;
+-- return std_logic_vector(res);
+-- end function;
+
+ constant ETM_ID : std_logic_vector(7 downto 0) := x"00";--etm_id_func;
+
+
+function generateIncludedFeatures return std_logic_vector is
+ variable t : std_logic_vector(63 downto 0);
+ begin
+ t := (others => '0');
+ t(63 downto 56) := std_logic_vector(to_unsigned(1,8)); --table version 1
+ t(17 downto 17) := std_logic_vector(to_unsigned(INCLUDE_GBE,1)); --sctrl via GbE
+ t(23 downto 23) := std_logic_vector(to_unsigned(INCLUDE_GBE,1));
+-- t(26 downto 24) := std_logic_vector(to_unsigned(1,3)); --num SFPs with TrbNet
+ t(40 downto 40) := std_logic_vector(to_unsigned(INCLUDE_LCD,1));
+ t(42 downto 42) := std_logic_vector(to_unsigned(INCLUDE_SPI,1));
+ t(43 downto 43) := std_logic_vector(to_unsigned(INCLUDE_UART,1));
+ t(44 downto 44) := std_logic_vector(to_unsigned(INCLUDE_STATISTICS,1));
+ t(51 downto 48) := std_logic_vector(to_unsigned(INCLUDE_TRIGGER_LOGIC,4));
+ t(52 downto 52) := std_logic_vector(to_unsigned(USE_120_MHZ,1));
+ t(53 downto 53) := std_logic_vector(to_unsigned(USE_RXCLOCK,1));
+ t(54 downto 54) := std_logic_vector(to_unsigned(USE_EXTERNAL_CLOCK,1));
+ return t;
+ end function;
+
+ constant INCLUDED_FEATURES : std_logic_vector(63 downto 0) := generateIncludedFeatures;
+
+end package body;
--- /dev/null
+
+# implementation: "workdir"
+impl -add workdir -type fpga
+
+# device options
+set_option -technology LATTICE-ECP3
+set_option -part LFE3_150EA
+set_option -package FN1156C
+set_option -speed_grade -8
+set_option -part_companion ""
+
+# compilation/mapping options
+set_option -default_enum_encoding sequential
+set_option -symbolic_fsm_compiler 1
+set_option -top_module "trb3sc_cts"
+set_option -resource_sharing false
+
+# map options
+set_option -frequency 100
+set_option -fanout_limit 100
+set_option -disable_io_insertion 0
+set_option -retiming 1
+set_option -pipe 1
+set_option -force_gsr false
+set_option -fixgatedclocks 3
+set_option -fixgeneratedclocks 3
+set_option -compiler_compatible true
+
+set_option -max_parallel_jobs 3
+#set_option -automatic_compile_point 1
+#set_option -continue_on_error 1
+set_option -resolve_multiple_driver 1
+
+# simulation options
+set_option -write_verilog 0
+set_option -write_vhdl 1
+
+# automatic place and route (vendor) options
+set_option -write_apr_constraint 0
+
+# set result format/file last
+project -result_format "edif"
+project -result_file "workdir/trb3sc_cts.edf"
+
+#implementation attributes
+
+set_option -vlog_std v2001
+set_option -project_relative_includes 1
+impl -active "workdir"
+
+####################
+
+
+
+#Packages
+add_file -vhdl -lib work "workdir/version.vhd"
+add_file -vhdl -lib work "config.vhd"
+add_file -vhdl -lib work "../../trb3/base/trb3_components.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_std.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_hub_func.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_components.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net_gbe_protocols.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net_gbe_components.vhd"
+
+#Basic Infrastructure
+add_file -vhdl -lib work "../../trb3sc/cores/pll_in200_out100.vhd"
+add_file -vhdl -lib work "../../trb3sc/cores/pll_in240_out200.vhd"
+add_file -vhdl -lib work "../../trb3sc/cores/pll_in240_out240.vhd"
+add_file -vhdl -lib work "../../trb3/base/cores/pll_200_4.vhd"
+add_file -vhdl -lib work "../../trb3sc/code/clock_reset_handler.vhd"
+add_file -vhdl -lib work "../../trb3sc/code/load_settings.vhd"
+add_file -vhdl -lib work "../../trb3sc/code/spi_master_generic.vhd"
+add_file -vhdl -lib work "../../trb3/base/code/input_to_trigger_logic_record.vhd"
+add_file -vhdl -lib work "../../trb3/base/code/input_statistics.vhd"
+add_file -vhdl -lib work "../../trbnet/special/trb_net_reset_handler.vhd"
+add_file -vhdl -lib work "../../trbnet/special/spi_flash_and_fpga_reload_record.vhd"
+add_file -vhdl -lib work "../../trb3/base/code/sedcheck.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/priority_arbiter.vhd"
+
+
+#Fifos
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/spi_dpram_32_to_8.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/lattice_ecp3_fifo_18x1k.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/trb_net16_fifo_arch.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/lattice_ecp3_fifo_16bit_dualport.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/trb_net_fifo_16bit_bram_dualport.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/lattice_ecp2m_fifo.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/fifo/fifo_36x256_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/fifo/fifo_36x512_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/fifo/fifo_36x1k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/fifo/fifo_36x2k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/fifo/fifo_36x4k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/fifo/fifo_36x8k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/fifo/fifo_36x16k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/fifo/fifo_36x32k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/fifo/fifo_18x256_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/fifo/fifo_18x512_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/fifo/fifo_18x1k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/fifo/fifo_18x2k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/fifo/fifo_9x2k_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp2m/fifo/fifo_var_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/fifo/fifo_19x16_obuf.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/lattice_ecp3_fifo_16x16_dualport.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/lattice_ecp3_fifo_18x16_dualport.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/lattice_ecp3_fifo_18x16_dualport_oreg.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/ram_18x256_oreg.vhd"
+
+
+#Flash & Reload, Tools
+add_file -vhdl -lib work "../../trbnet/special/slv_register.vhd"
+add_file -vhdl -lib work "../../trbnet/special/spi_master.vhd"
+add_file -vhdl -lib work "../../trbnet/special/spi_slim.vhd"
+add_file -vhdl -lib work "../../trbnet/special/spi_databus_memory.vhd"
+add_file -vhdl -lib work "../../trbnet/special/fpga_reboot.vhd"
+add_file -vhdl -lib work "../../trb3sc/code/trb3sc_tools.vhd"
+add_file -vhdl -lib work "../../trb3sc/code/debuguart.vhd"
+add_file -vhdl -lib work "../../trb3sc/code/lcd.vhd"
+add_file -vhdl -lib work "../../trbnet/special/uart.vhd"
+add_file -vhdl -lib work "../../trbnet/special/uart_rec.vhd"
+add_file -vhdl -lib work "../../trbnet/special/uart_trans.vhd"
+add_file -vhdl -lib work "../../trbnet/special/spi_ltc2600.vhd"
+
+#SlowControl files
+add_file -vhdl -lib work "../../trbnet/trb_net16_regio_bus_handler.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_regio_bus_handler_record.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_regIO.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_onewire.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_addresses.vhd"
+
+#Media interface
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/med_sync_define.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/rx_control.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/tx_control.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/rx_reset_fsm.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/tx_reset_fsm.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/sci_reader.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/sync/med_sync_control.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/ecp3_sfp/serdes_sync_0.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/ecp3_sfp/serdes_sync_3.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/ecp3_sfp/serdes_sync_4.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/ecp3_sfp/serdes_sync_4_slave3.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/med_ecp3_sfp_sync.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/med_ecp3_sfp_sync_4.vhd"
+add_file -vhdl -lib work "../../trbnet/media_interfaces/med_ecp3_sfp_sync_4_slave3.vhd"
+
+#TrbNet Endpoint
+add_file -vhdl -lib work "../../trbnet/trb_net16_term_buf.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_CRC.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_CRC8.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/rom_16x8.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/ram.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/pulse_sync.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/state_sync.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/ram_16x8_dp.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/ram_16x16_dp.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/ram_dp.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_term.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_sbuf.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_sbuf5.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_sbuf6.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_sbuf.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_priority_encoder.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_dummy_fifo.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_dummy_fifo.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_term_ibuf.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_priority_arbiter.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net_pattern_gen.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_obuf_nodata.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_obuf.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_ibuf.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_api_base.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_iobuf.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_io_multiplexer.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_trigger.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_ipudata.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_endpoint_hades_full.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/signal_sync.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/ram_dp_rw.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/pulse_stretch.vhd"
+
+#Hub
+add_file -vhdl -lib work "../../trbnet/trb_net16_api_ipu_streaming.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_hub_streaming_port.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_hub_streaming_port_sctrl_cts.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_hub_base.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_hub_logic_2.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_hub_ipu_logic.vhd"
+add_file -vhdl -lib work "../../trbnet/basics/wide_adder_17x16.vhd"
+add_file -vhdl -lib work "../../trbnet/lattice/ecp3/fifo/fifo_19x16.vhd"
+
+add_file -vhdl -lib work "../../trbnet/trb_net16_api_ipu_streaming_internal.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_ipudata.vhd"
+
+
+#GbE
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/gbe_wrapper.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/gbe_logic_wrapper.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/gbe_med_interface.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/gbe_ipu_multiplexer.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/gbe_ipu_dummy.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_frame_receiver.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_receive_control.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_main_control.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_mac_control.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_protocol_prioritizer.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_protocol_selector.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_type_validator.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_frame_trans.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_frame_constr.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_transmit_control2.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_ipu_interface.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_event_constr.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/trb_net16_gbe_setup.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/base/ip_configurator.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/protocols/trb_net16_gbe_response_constructor_ARP.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/protocols/trb_net16_gbe_response_constructor_Ping.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/protocols/trb_net16_gbe_response_constructor_DHCP.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/protocols/trb_net16_gbe_response_constructor_SCTRL.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/protocols/trb_net16_gbe_response_constructor_TrbNetData.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/protocols/trb_net16_gbe_response_constructor_KillPing.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/protocols/trb_net16_gbe_response_constructor_Forward.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/media/serdes_gbe_4ch.vhd"
+add_file -verilog -lib work "../../trbnet/gbe_trb/media/sgmii_channel_smi.v"
+add_file -verilog -lib work "../../trbnet/gbe_trb/media/reset_controller_pcs.v"
+add_file -verilog -lib work "../../trbnet/gbe_trb/media/reset_controller_cdr.v"
+add_file -verilog -lib work "../../trbnet/gbe_trb/media/register_interface_hb.v"
+add_file -verilog -lib work "../../trbnet/gbe_trb/media/rate_resolution.v"
+
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_8kx9.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_4096x9.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_512x32.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_512x32x8.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_512x72.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_64kx9.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_64kx9_af.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_32kx16x8_mb2.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_2048x8x16.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_65536x18x9.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/slv_mac_memory.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/ip_mem.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_64kx18x9_wcnt.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_32kx18x9_wcnt.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_64kx9_af_cnt.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_8kx9_af_cnt.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_2kx9x18_wcnt.vhd"
+add_file -vhdl -lib work "../../trbnet/gbe_trb/ipcores/ecp3/fifo_4kx18x9_wcnt.vhd"
+
+
+add_file -vhdl -lib work "../../trbnet/special/handler_lvl1.vhd"
+add_file -vhdl -lib work "../../trbnet/special/handler_data.vhd"
+add_file -vhdl -lib work "../../trbnet/special/handler_ipu.vhd"
+add_file -vhdl -lib work "../../trbnet/special/handler_trigger_and_data.vhd"
+add_file -vhdl -lib work "../../trbnet/trb_net16_endpoint_hades_full_handler_record.vhd"
+add_file -vhdl -lib work "../../trbnet/special/bus_register_handler.vhd"
+
+add_file -vhdl -lib work "../../trb3/cts/source/cts_pkg.vhd"
+add_file -vhdl -lib work "../../trb3/cts/source/m26_sensor_etm.vhd"
+add_file -vhdl -lib work "../../trb3/cts/source/mbs_master.vhd"
+add_file -vhdl -lib work "../../trb3/cts/source/timestamp_generator.vhd"
+add_file -vhdl -lib work "../../trb3/cts/source/cts_fifo.vhd"
+add_file -vhdl -lib work "../../trb3/cts/source/cts_trg_input.vhd"
+add_file -vhdl -lib work "../../trb3/cts/source/cts_trg_coin.vhd"
+add_file -vhdl -lib work "../../trb3/cts/source/cts_trg_pseudorand_pulser.vhd"
+add_file -vhdl -lib work "../../trb3/cts/source/cts_trigger.vhd"
+add_file -vhdl -lib work "../../trb3/cts/source/cts.vhd"
+
+
+
+add_file -vhdl -lib work "./trb3sc_cts.vhd"
+#add_file -fpga_constraint "./synplify.fdc"
+
+
+
--- /dev/null
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.numeric_std.all;
+
+library work;
+use work.version.all;
+use work.config.all;
+use work.trb_net_std.all;
+use work.trb_net_components.all;
+use work.trb3_components.all;
+use work.trb_net16_hub_func.all;
+use work.version.all;
+use work.trb_net_gbe_components.all;
+use work.med_sync_define.all;
+use work.cts_pkg.all;
+
+entity trb3sc_cts is
+ port(
+ CLK_SUPPL_PCLK : in std_logic; --125 MHz for GbE
+ CLK_CORE_PCLK : in std_logic; --Main Oscillator
+ CLK_EXT_PLL_LEFT : in std_logic; --External Clock
+
+ --Additional IO
+ HDR_IO : inout std_logic_vector(10 downto 1);
+ BACK_LVDS : inout std_logic_vector( 1 downto 0);
+ BACK_GPIO : inout std_logic_vector( 3 downto 0);
+
+ SPARE_IN : in std_logic_vector( 1 downto 0);
+ INP : in std_logic_vector(95 downto 64);
+ RJ_IO : out std_logic_vector( 3 downto 0); --0, inner RJ trigger output
+
+ --LED
+ LED_GREEN : out std_logic;
+ LED_YELLOW : out std_logic;
+ LED_ORANGE : out std_logic;
+ LED_RED : out std_logic;
+ LED_RJ_GREEN : out std_logic_vector( 1 downto 0);
+ LED_RJ_RED : out std_logic_vector( 1 downto 0);
+ LED_WHITE : out std_logic_vector( 1 downto 0);
+ LED_SFP_GREEN : out std_logic_vector( 1 downto 0);
+ LED_SFP_RED : out std_logic_vector( 1 downto 0);
+
+ --SFP
+ SFP_LOS : in std_logic_vector( 1 downto 0);
+ SFP_MOD0 : in std_logic_vector( 1 downto 0);
+ SFP_MOD1 : inout std_logic_vector( 1 downto 0) := (others => 'Z');
+ SFP_MOD2 : inout std_logic_vector( 1 downto 0) := (others => 'Z');
+ SFP_TX_DIS : out std_logic_vector( 1 downto 0) := (others => '0');
+
+ LED_HUB_LINKOK : out std_logic_vector(8 downto 1);
+ LED_HUB_RX : out std_logic_vector(8 downto 1);
+ LED_HUB_TX : out std_logic_vector(8 downto 1);
+ HUB_MOD0 : in std_logic_vector(8 downto 1);
+ HUB_MOD1 : inout std_logic_vector(8 downto 1);
+ HUB_MOD2 : inout std_logic_vector(8 downto 1);
+ HUB_TXDIS : out std_logic_vector(8 downto 1);
+ HUB_LOS : in std_logic_vector(8 downto 1);
+
+ --Serdes switch
+ PCSSW_ENSMB : out std_logic;
+ PCSSW_EQ : out std_logic_vector( 3 downto 0);
+ PCSSW_PE : out std_logic_vector( 3 downto 0);
+ PCSSW : out std_logic_vector( 7 downto 0);
+
+ --ADC
+ ADC_CLK : out std_logic;
+ ADC_CS : out std_logic;
+ ADC_DIN : out std_logic;
+ ADC_DOUT : in std_logic;
+
+ --SPI
+ DAC_OUT_SDO : out std_logic_vector(6 downto 5);
+ DAC_OUT_SCK : out std_logic_vector(6 downto 5);
+ DAC_OUT_CS : out std_logic_vector(6 downto 5);
+ DAC_IN_SDI : in std_logic_vector(6 downto 5);
+
+
+ --Flash, 1-wire, Reload
+ FLASH_CLK : out std_logic;
+ FLASH_CS : out std_logic;
+ FLASH_IN : out std_logic;
+ FLASH_OUT : in std_logic;
+ PROGRAMN : out std_logic;
+ ENPIRION_CLOCK : out std_logic;
+ TEMPSENS : inout std_logic;
+
+ --Test Connectors
+ TEST_LINE : out std_logic_vector(15 downto 0)
+ );
+
+
+ attribute syn_useioff : boolean;
+ attribute syn_useioff of FLASH_CLK : signal is true;
+ attribute syn_useioff of FLASH_CS : signal is true;
+ attribute syn_useioff of FLASH_IN : signal is true;
+ attribute syn_useioff of FLASH_OUT : signal is true;
+
+
+
+end entity;
+
+architecture trb3sc_arch of trb3sc_cts is
+ attribute syn_keep : boolean;
+ attribute syn_preserve : boolean;
+
+-- constant CTS_ADDON_LINE_COUNT : integer := 18;
+-- constant CTS_OUTPUT_MULTIPLEXERS : integer := 1;
+-- constant CTS_OUTPUT_INPUTS : integer := 16;
+
+
+
+ signal clk_sys, clk_full, clk_full_osc : std_logic;
+ signal GSR_N : std_logic;
+ signal reset_i : std_logic;
+ signal clear_i : std_logic;
+ signal do_reboot_i, reboot_from_gbe : std_logic;
+
+ signal time_counter : unsigned(31 downto 0) := (others => '0');
+ signal led : std_logic_vector(1 downto 0);
+ signal debug_clock_reset : std_logic_vector(31 downto 0);
+
+ --Media Interface
+ signal med2int : med2int_array_t(0 to INTERFACE_NUM-1);
+ signal int2med : int2med_array_t(0 to INTERFACE_NUM-1);
+
+ signal ctrlbus_rx, bussci1_rx, bussci2_rx, bussci3_rx, bustools_rx, buscts_rx,
+ bustc_rx, busgbeip_rx, busgbereg_rx, bus_master_out, handlerbus_rx : CTRLBUS_RX;
+ signal ctrlbus_tx, bussci1_tx, bussci2_tx, bussci3_tx, bustools_tx, buscts_tx,
+ bustc_tx, busgbeip_tx, busgbereg_tx, bus_master_in : CTRLBUS_TX;
+
+ signal sed_error_i : std_logic;
+ signal bus_master_active : std_logic;
+
+ signal spi_cs, spi_mosi, spi_miso, spi_clk : std_logic_vector(15 downto 0);
+ signal uart_tx, uart_rx : std_logic;
+
+ signal common_ctrl_reg : std_logic_vector (std_COMCTRLREG*32-1 downto 0);
+
+ signal my_address : std_logic_vector(15 downto 0);
+ signal mc_unique_id : std_logic_vector(63 downto 0);
+ signal reset_via_gbe : std_logic := '0';
+
+ signal med_dataready_out : std_logic_vector (1-1 downto 0);
+ signal med_data_out : std_logic_vector (1*c_DATA_WIDTH-1 downto 0);
+ signal med_packet_num_out : std_logic_vector (1*c_NUM_WIDTH-1 downto 0);
+ signal med_read_in : std_logic_vector (1-1 downto 0);
+ signal med_dataready_in : std_logic_vector (1-1 downto 0);
+ signal med_data_in : std_logic_vector (1*c_DATA_WIDTH-1 downto 0);
+ signal med_packet_num_in : std_logic_vector (1*c_NUM_WIDTH-1 downto 0);
+ signal med_read_out : std_logic_vector (1-1 downto 0);
+ signal med_stat_op : std_logic_vector (1*16-1 downto 0);
+ signal med_ctrl_op : std_logic_vector (1*16-1 downto 0);
+ signal rdack, wrack : std_logic;
+
+ signal monitor_inputs_i : std_logic_vector(MONITOR_INPUT_NUM-1 downto 0);
+ signal timer_ticks : std_logic_vector(1 downto 0);
+ signal trigger_busy_i : std_logic;
+ signal cts_trigger_out : std_logic;
+
+ signal gbe_cts_number : std_logic_vector(15 downto 0);
+ signal gbe_cts_code : std_logic_vector(7 downto 0);
+ signal gbe_cts_information : std_logic_vector(7 downto 0);
+ signal gbe_cts_start_readout : std_logic;
+ signal gbe_cts_readout_type : std_logic_vector(3 downto 0);
+ signal gbe_cts_readout_finished : std_logic;
+ signal gbe_cts_status_bits : std_logic_vector(31 downto 0);
+ signal gbe_fee_data : std_logic_vector(15 downto 0);
+ signal gbe_fee_dataready : std_logic;
+ signal gbe_fee_read : std_logic;
+ signal gbe_fee_status_bits : std_logic_vector(31 downto 0);
+ signal gbe_fee_busy : std_logic;
+
+ signal gsc_init_data, gsc_reply_data : std_logic_vector(15 downto 0);
+ signal gsc_init_read, gsc_reply_read : std_logic;
+ signal gsc_init_dataready, gsc_reply_dataready : std_logic;
+ signal gsc_init_packet_num, gsc_reply_packet_num : std_logic_vector(2 downto 0);
+ signal gsc_busy : std_logic;
+
+ signal cts_rdo_trigger : std_logic;
+ signal cts_rdo_trg_data_valid : std_logic;
+ signal cts_rdo_valid_timing_trg : std_logic;
+ signal cts_rdo_valid_notiming_trg : std_logic;
+ signal cts_rdo_invalid_trg : std_logic;
+
+ signal cts_rdo_trg_status_bits,
+ cts_rdo_trg_status_bits_cts : std_logic_vector(31 downto 0) := (others => '0');
+ signal cts_rdo_data : std_logic_vector(31 downto 0);
+ signal cts_rdo_write : std_logic;
+ signal cts_rdo_finished : std_logic;
+
+ signal cts_ext_trigger : std_logic;
+ signal cts_ext_status : std_logic_vector(31 downto 0) := (others => '0');
+ signal cts_ext_control : std_logic_vector(31 downto 0);
+ signal cts_ext_debug : std_logic_vector(31 downto 0);
+ signal cts_ext_header : std_logic_vector(1 downto 0);
+
+ signal cts_rdo_additional_data : std_logic_vector(32*cts_rdo_additional_ports-1 downto 0);
+ signal cts_rdo_additional_write : std_logic_vector(cts_rdo_additional_ports-1 downto 0) := (others => '0');
+ signal cts_rdo_additional_finished : std_logic_vector(cts_rdo_additional_ports-1 downto 0) := (others => '1');
+ signal cts_rdo_trg_status_bits_additional : std_logic_vector(32*cts_rdo_additional_ports-1 downto 0) := (others => '0');
+
+ signal cts_rdo_additional : readout_tx_array_t(0 to cts_rdo_additional_ports-1);
+
+ signal cts_rdo_trg_type : std_logic_vector(3 downto 0);
+ signal cts_rdo_trg_code : std_logic_vector(7 downto 0);
+ signal cts_rdo_trg_information : std_logic_vector(23 downto 0);
+ signal cts_rdo_trg_number : std_logic_vector(15 downto 0);
+
+ signal cts_addon_triggers_in : std_logic_vector(ADDON_LINE_COUNT-1 downto 0);
+-- signal cts_addon_activity_i,
+-- cts_addon_selected_i : std_logic_vector(6 downto 0);
+
+-- signal cts_periph_trigger_i : std_logic_vector(19 downto 0);
+-- signal cts_output_multiplexers_i : std_logic_vector(CTS_OUTPUT_MULTIPLEXERS - 1 downto 0);
+
+-- signal cts_periph_lines_i : std_logic_vector(CTS_OUTPUT_INPUTS - 1 downto 0);
+
+ signal cts_trg_send : std_logic;
+ signal cts_trg_type : std_logic_vector(3 downto 0);
+ signal cts_trg_number : std_logic_vector(15 downto 0);
+ signal cts_trg_information : std_logic_vector(23 downto 0);
+ signal cts_trg_code : std_logic_vector(7 downto 0);
+ signal cts_trg_status_bits : std_logic_vector(31 downto 0);
+ signal cts_trg_busy : std_logic;
+
+ signal cts_ipu_send : std_logic;
+ signal cts_ipu_type : std_logic_vector(3 downto 0);
+ signal cts_ipu_number : std_logic_vector(15 downto 0);
+ signal cts_ipu_information : std_logic_vector(7 downto 0);
+ signal cts_ipu_code : std_logic_vector(7 downto 0);
+ signal cts_ipu_status_bits : std_logic_vector(31 downto 0);
+ signal cts_ipu_busy : std_logic;
+
+ attribute syn_keep of GSR_N : signal is true;
+ attribute syn_preserve of GSR_N : signal is true;
+ attribute syn_keep of bussci1_rx : signal is true;
+ attribute syn_preserve of bussci1_rx : signal is true;
+ attribute syn_keep of bustools_rx : signal is true;
+ attribute syn_preserve of bustools_rx : signal is true;
+ attribute syn_keep of bustc_rx : signal is true;
+ attribute syn_preserve of bustc_rx : signal is true;
+
+begin
+
+
+---------------------------------------------------------------------------
+-- Clock & Reset Handling
+---------------------------------------------------------------------------
+THE_CLOCK_RESET : entity work.clock_reset_handler
+ port map(
+ INT_CLK_IN => CLK_CORE_PCLK,
+ EXT_CLK_IN => CLK_EXT_PLL_LEFT,
+ NET_CLK_FULL_IN => '0',
+ NET_CLK_HALF_IN => '0',
+ RESET_FROM_NET => reset_via_gbe,
+
+ BUS_RX => bustc_rx,
+ BUS_TX => bustc_tx,
+
+ RESET_OUT => reset_i,
+ CLEAR_OUT => clear_i,
+ GSR_OUT => GSR_N,
+
+ FULL_CLK_OUT => clk_full,
+ SYS_CLK_OUT => clk_sys,
+ REF_CLK_OUT => clk_full_osc,
+
+ ENPIRION_CLOCK => ENPIRION_CLOCK,
+ LED_RED_OUT => LED_RJ_RED,
+ LED_GREEN_OUT => LED_RJ_GREEN,
+ DEBUG_OUT => debug_clock_reset
+ );
+
+
+---------------------------------------------------------------------------
+-- PCSA
+---------------------------------------------------------------------------
+bussci1_tx.data <= (others => '0');
+bussci1_tx.ack <= '0';
+bussci1_tx.nack <= '0';
+bussci1_tx.unknown <= '1';
+
+
+---------------------------------------------------------------------------
+-- PCSB Downlink without backplane is SFP
+---------------------------------------------------------------------------
+gen_PCSB : if USE_BACKPLANE = c_NO and USE_ADDON = c_NO generate
+ THE_MEDIA_PCSB : entity work.med_ecp3_sfp_sync
+ generic map(
+ SERDES_NUM => 3,
+ IS_SYNC_SLAVE => c_NO
+ )
+ port map(
+ CLK_REF_FULL => clk_full_osc,
+ CLK_INTERNAL_FULL => clk_full_osc,
+ SYSCLK => clk_sys,
+ RESET => reset_i,
+ CLEAR => clear_i,
+ --Internal Connection
+ MEDIA_MED2INT => med2int(0),
+ MEDIA_INT2MED => int2med(0),
+
+ --Sync operation
+ RX_DLM => open,
+ RX_DLM_WORD => open,
+ TX_DLM => open,
+ TX_DLM_WORD => open,
+
+ --SFP Connection
+ SD_PRSNT_N_IN => SFP_MOD0(1),
+ SD_LOS_IN => SFP_LOS(1),
+ SD_TXDIS_OUT => SFP_TX_DIS(1),
+ --Control Interface
+ BUS_RX => bussci2_rx,
+ BUS_TX => bussci2_tx,
+ -- Status and control port
+ STAT_DEBUG => open,
+ CTRL_DEBUG => open
+ );
+end generate;
+
+---------------------------------------------------------------------------
+-- PCSC 4 downlinks
+---------------------------------------------------------------------------
+bussci3_tx.data <= (others => '0');
+bussci3_tx.ack <= '0';
+bussci3_tx.nack <= '0';
+bussci3_tx.unknown <= '1';
+-- THE_MEDIA_4_PCSC : entity work.med_ecp3_sfp_sync_4
+-- generic map(
+-- IS_SYNC_SLAVE => (c_NO, c_NO, c_NO, c_NO),
+-- IS_USED => (c_YES,c_YES ,c_YES ,c_YES)
+-- )
+-- port map(
+-- CLK_REF_FULL => clk_full_osc,
+-- CLK_INTERNAL_FULL => clk_full_osc,
+-- SYSCLK => clk_sys,
+-- RESET => reset_i,
+-- CLEAR => clear_i,
+--
+-- --Internal Connection
+-- MEDIA_MED2INT(0) => med2int(3),
+-- MEDIA_MED2INT(1) => med2int(4),
+-- MEDIA_MED2INT(2) => med2int(1),
+-- MEDIA_MED2INT(3) => med2int(2),
+-- MEDIA_INT2MED(0) => int2med(3),
+-- MEDIA_INT2MED(1) => int2med(4),
+-- MEDIA_INT2MED(2) => int2med(1),
+-- MEDIA_INT2MED(3) => int2med(2),
+--
+-- --Sync operation
+-- RX_DLM => open,
+-- RX_DLM_WORD => open,
+-- TX_DLM => open,
+-- TX_DLM_WORD => open,
+--
+-- --SFP Connection
+-- SD_PRSNT_N_IN(0) => HUB_MOD0(3),
+-- SD_PRSNT_N_IN(1) => HUB_MOD0(4),
+-- SD_PRSNT_N_IN(2) => HUB_MOD0(1),
+-- SD_PRSNT_N_IN(3) => HUB_MOD0(2),
+--
+-- SD_LOS_IN(0) => HUB_LOS(3),
+-- SD_LOS_IN(1) => HUB_LOS(4),
+-- SD_LOS_IN(2) => HUB_LOS(1),
+-- SD_LOS_IN(3) => HUB_LOS(2),
+--
+-- SD_TXDIS_OUT(0) => HUB_TXDIS(3),
+-- SD_TXDIS_OUT(1) => HUB_TXDIS(4),
+-- SD_TXDIS_OUT(2) => HUB_TXDIS(1),
+-- SD_TXDIS_OUT(3) => HUB_TXDIS(2),
+--
+-- --Control Interface
+-- BUS_RX => bussci3_rx,
+-- BUS_TX => bussci3_tx,
+--
+-- -- Status and control port
+-- STAT_DEBUG => open, --med_stat_debug(63 downto 0),
+-- CTRL_DEBUG => open
+-- );
+
+
+
+---------------------------------------------------------------------------
+-- PCSD GBE
+---------------------------------------------------------------------------
+---------------------------------------------------------------------------
+-- GbE
+---------------------------------------------------------------------------
+ GBE : entity work.gbe_wrapper
+ generic map(
+ DO_SIMULATION => 0,
+ INCLUDE_DEBUG => 0,
+ USE_INTERNAL_TRBNET_DUMMY => 0,
+ USE_EXTERNAL_TRBNET_DUMMY => 0,
+ RX_PATH_ENABLE => 1,
+ FIXED_SIZE_MODE => 1,
+ INCREMENTAL_MODE => 1,
+ FIXED_SIZE => 100,
+ FIXED_DELAY_MODE => 1,
+ UP_DOWN_MODE => 0,
+ UP_DOWN_LIMIT => 100,
+ FIXED_DELAY => 100,
+
+ NUMBER_OF_GBE_LINKS => 4,
+ LINKS_ACTIVE => "0001",
+
+ LINK_HAS_READOUT => "0001",
+ LINK_HAS_SLOWCTRL => "0001",
+ LINK_HAS_DHCP => "0001",
+ LINK_HAS_ARP => "0001",
+ LINK_HAS_PING => "0001",
+ LINK_HAS_FWD => "0000"
+ )
+
+ port map(
+ CLK_SYS_IN => clk_sys,
+ CLK_125_IN => CLK_SUPPL_PCLK,
+ RESET => reset_i,
+ GSR_N => GSR_N,
+
+ TRIGGER_IN => '0',
+
+ SD_PRSNT_N_IN(0) => SFP_MOD0(0),
+ SD_LOS_IN(0) => SFP_LOS(0),
+ SD_TXDIS_OUT(0) => SFP_TX_DIS(0),
+ CTS_NUMBER_IN => gbe_cts_number,
+ CTS_CODE_IN => gbe_cts_code,
+ CTS_INFORMATION_IN => gbe_cts_information,
+ CTS_READOUT_TYPE_IN => gbe_cts_readout_type,
+ CTS_START_READOUT_IN => gbe_cts_start_readout,
+ CTS_DATA_OUT => open,
+ CTS_DATAREADY_OUT => open,
+ CTS_READOUT_FINISHED_OUT => gbe_cts_readout_finished,
+ CTS_READ_IN => '1',
+ CTS_LENGTH_OUT => open,
+ CTS_ERROR_PATTERN_OUT => gbe_cts_status_bits,
+
+ FEE_DATA_IN => gbe_fee_data,
+ FEE_DATAREADY_IN => gbe_fee_dataready,
+ FEE_READ_OUT => gbe_fee_read,
+ FEE_STATUS_BITS_IN => gbe_fee_status_bits,
+ FEE_BUSY_IN => gbe_fee_busy,
+
+ MC_UNIQUE_ID_IN => mc_unique_id,
+ MY_TRBNET_ADDRESS_IN => my_address,
+ ISSUE_REBOOT_OUT => reboot_from_gbe,
+
+ GSC_CLK_IN => clk_sys,
+ GSC_INIT_DATAREADY_OUT => gsc_init_dataready,
+ GSC_INIT_DATA_OUT => gsc_init_data,
+ GSC_INIT_PACKET_NUM_OUT => gsc_init_packet_num,
+ GSC_INIT_READ_IN => gsc_init_read,
+ GSC_REPLY_DATAREADY_IN => gsc_reply_dataready,
+ GSC_REPLY_DATA_IN => gsc_reply_data,
+ GSC_REPLY_PACKET_NUM_IN => gsc_reply_packet_num,
+ GSC_REPLY_READ_OUT => gsc_reply_read,
+ GSC_BUSY_IN => gsc_busy,
+
+ BUS_IP_RX => busgbeip_rx,
+ BUS_IP_TX => busgbeip_tx,
+ BUS_REG_RX => busgbereg_rx,
+ BUS_REG_TX => busgbereg_tx,
+
+ MAKE_RESET_OUT => reset_via_gbe,
+
+ DEBUG_OUT => open
+ );
+
+
+---------------------------------------------------------------------------
+-- Hub
+---------------------------------------------------------------------------
+ THE_HUB : trb_net16_hub_streaming_port_sctrl_cts
+ generic map(
+ INIT_ADDRESS => x"F3C0",
+ MII_NUMBER => INTERFACE_NUM,
+ MII_IS_UPLINK => IS_UPLINK,
+ MII_IS_DOWNLINK => IS_DOWNLINK,
+ MII_IS_UPLINK_ONLY => IS_UPLINK_ONLY,
+ HARDWARE_VERSION => HARDWARE_INFO,
+ INIT_ENDPOINT_ID => x"0005",
+ BROADCAST_BITMASK => x"7E",
+ CLOCK_FREQUENCY => 100,
+ USE_ONEWIRE => c_YES,
+ BROADCAST_SPECIAL_ADDR => x"35",
+ RDO_ADDITIONAL_PORT => cts_rdo_additional_ports,
+ RDO_DATA_BUFFER_DEPTH => 9,
+ RDO_DATA_BUFFER_FULL_THRESH => 2**9-128,
+ RDO_HEADER_BUFFER_DEPTH => 9,
+ RDO_HEADER_BUFFER_FULL_THRESH => 2**9-16
+ )
+ port map (
+ CLK => clk_sys,
+ RESET => reset_i,
+ CLK_EN => '1',
+
+ -- Media interfacces ---------------------------------------------------------------
+ MED_DATAREADY_OUT(INTERFACE_NUM*1-1 downto 0) => med_dataready_out,
+ MED_DATA_OUT(INTERFACE_NUM*16-1 downto 0) => med_data_out,
+ MED_PACKET_NUM_OUT(INTERFACE_NUM*3-1 downto 0) => med_packet_num_out,
+ MED_READ_IN(INTERFACE_NUM*1-1 downto 0) => med_read_in,
+ MED_DATAREADY_IN(INTERFACE_NUM*1-1 downto 0) => med_dataready_in,
+ MED_DATA_IN(INTERFACE_NUM*16-1 downto 0) => med_data_in,
+ MED_PACKET_NUM_IN(INTERFACE_NUM*3-1 downto 0) => med_packet_num_in,
+ MED_READ_OUT(INTERFACE_NUM*1-1 downto 0) => med_read_out,
+ MED_STAT_OP(INTERFACE_NUM*16-1 downto 0) => med_stat_op,
+ MED_CTRL_OP(INTERFACE_NUM*16-1 downto 0) => med_ctrl_op,
+
+ -- Gbe Read-out Path ---------------------------------------------------------------
+ --Event information coming from CTS for GbE
+ GBE_CTS_NUMBER_OUT => gbe_cts_number,
+ GBE_CTS_CODE_OUT => gbe_cts_code,
+ GBE_CTS_INFORMATION_OUT => gbe_cts_information,
+ GBE_CTS_READOUT_TYPE_OUT => gbe_cts_readout_type,
+ GBE_CTS_START_READOUT_OUT => gbe_cts_start_readout,
+ --Information sent to CTS
+ GBE_CTS_READOUT_FINISHED_IN => gbe_cts_readout_finished,
+ GBE_CTS_STATUS_BITS_IN => gbe_cts_status_bits,
+ -- Data from Frontends
+ GBE_FEE_DATA_OUT => gbe_fee_data,
+ GBE_FEE_DATAREADY_OUT => gbe_fee_dataready,
+ GBE_FEE_READ_IN => gbe_fee_read,
+ GBE_FEE_STATUS_BITS_OUT => gbe_fee_status_bits,
+ GBE_FEE_BUSY_OUT => gbe_fee_busy,
+
+ -- CTS Request Sending -------------------------------------------------------------
+ --LVL1 trigger
+ CTS_TRG_SEND_IN => cts_trg_send,
+ CTS_TRG_TYPE_IN => cts_trg_type,
+ CTS_TRG_NUMBER_IN => cts_trg_number,
+ CTS_TRG_INFORMATION_IN => cts_trg_information,
+ CTS_TRG_RND_CODE_IN => cts_trg_code,
+ CTS_TRG_STATUS_BITS_OUT => cts_trg_status_bits,
+ CTS_TRG_BUSY_OUT => cts_trg_busy,
+ --IPU Channel
+ CTS_IPU_SEND_IN => cts_ipu_send,
+ CTS_IPU_TYPE_IN => cts_ipu_type,
+ CTS_IPU_NUMBER_IN => cts_ipu_number,
+ CTS_IPU_INFORMATION_IN => cts_ipu_information,
+ CTS_IPU_RND_CODE_IN => cts_ipu_code,
+ -- Receiver port
+ CTS_IPU_STATUS_BITS_OUT => cts_ipu_status_bits,
+ CTS_IPU_BUSY_OUT => cts_ipu_busy,
+
+ -- CTS Data Readout ----------------------------------------------------------------
+ --Trigger to CTS out
+ RDO_TRIGGER_IN => cts_trigger_out,
+ RDO_TRG_DATA_VALID_OUT => cts_rdo_trg_data_valid,
+ RDO_VALID_TIMING_TRG_OUT => cts_rdo_valid_timing_trg,
+ RDO_VALID_NOTIMING_TRG_OUT => cts_rdo_valid_notiming_trg,
+ RDO_INVALID_TRG_OUT => cts_rdo_invalid_trg,
+ RDO_TRG_TYPE_OUT => cts_rdo_trg_type,
+ RDO_TRG_CODE_OUT => cts_rdo_trg_code,
+ RDO_TRG_INFORMATION_OUT => cts_rdo_trg_information,
+ RDO_TRG_NUMBER_OUT => cts_rdo_trg_number,
+
+ --Data from CTS in
+ RDO_TRG_STATUSBITS_IN => cts_rdo_trg_status_bits_cts,
+ RDO_DATA_IN => cts_rdo_data,
+ RDO_DATA_WRITE_IN => cts_rdo_write,
+ RDO_DATA_FINISHED_IN => cts_rdo_finished,
+ --Data from additional modules
+ RDO_ADDITIONAL_STATUSBITS_IN => cts_rdo_trg_status_bits_additional,
+ RDO_ADDITIONAL_DATA => cts_rdo_additional_data,
+ RDO_ADDITIONAL_WRITE => cts_rdo_additional_write,
+ RDO_ADDITIONAL_FINISHED => cts_rdo_additional_finished,
+
+ -- Slow Control --------------------------------------------------------------------
+ COMMON_STAT_REGS => open,
+ COMMON_CTRL_REGS => common_ctrl_reg,
+ ONEWIRE => TEMPSENS,
+ ONEWIRE_MONITOR_IN => open,
+ MY_ADDRESS_OUT => my_address,
+ UNIQUE_ID_OUT => mc_unique_id,
+ TIMER_TICKS_OUT => timer_ticks,
+ EXTERNAL_SEND_RESET => reset_via_gbe,
+
+ REGIO_ADDR_OUT => ctrlbus_rx.addr,
+ REGIO_READ_ENABLE_OUT => ctrlbus_rx.read,
+ REGIO_WRITE_ENABLE_OUT => ctrlbus_rx.write,
+ REGIO_DATA_OUT => ctrlbus_rx.data,
+ REGIO_DATA_IN => ctrlbus_tx.data,
+ REGIO_DATAREADY_IN => rdack,
+ REGIO_NO_MORE_DATA_IN => ctrlbus_tx.nack,
+ REGIO_WRITE_ACK_IN => wrack,
+ REGIO_UNKNOWN_ADDR_IN => ctrlbus_tx.unknown,
+ REGIO_TIMEOUT_OUT => ctrlbus_rx.timeout,
+
+ --Gbe Sctrl Input
+ GSC_INIT_DATAREADY_IN => gsc_init_dataready,
+ GSC_INIT_DATA_IN => gsc_init_data,
+ GSC_INIT_PACKET_NUM_IN => gsc_init_packet_num,
+ GSC_INIT_READ_OUT => gsc_init_read,
+ GSC_REPLY_DATAREADY_OUT => gsc_reply_dataready,
+ GSC_REPLY_DATA_OUT => gsc_reply_data,
+ GSC_REPLY_PACKET_NUM_OUT => gsc_reply_packet_num,
+ GSC_REPLY_READ_IN => gsc_reply_read,
+ GSC_BUSY_OUT => gsc_busy,
+
+ --status and control ports
+ HUB_STAT_CHANNEL => open,
+ HUB_STAT_GEN => open,
+ MPLEX_CTRL => (others => '0'),
+ MPLEX_STAT => open,
+ STAT_REGS => open,
+ STAT_CTRL_REGS => open,
+
+ --Fixed status and control ports
+ STAT_DEBUG => open,
+ CTRL_DEBUG => (others => '0')
+ );
+
+ gen_addition_ports : for i in 0 to cts_rdo_additional_ports-1 generate
+ cts_rdo_additional_data(31 + i*32 downto 32*i) <= cts_rdo_additional(i).data;
+ cts_rdo_trg_status_bits_additional(31 + i*32 downto 32*i) <= cts_rdo_additional(i).statusbits;
+
+-- cts_rdo_additional_write(i) <= cts_rdo_additional(i).data_write;
+-- cts_rdo_additional_finished(i) <= cts_rdo_additional(i).data_finished;
+ cts_rdo_additional_write(i) <= '0';
+ cts_rdo_additional_finished(i) <= '1';
+
+ end generate;
+
+
+ gen_media_record : for i in 0 to INTERFACE_NUM-1 generate
+ med_data_in(i*16+15 downto i*16) <= med2int(i).data;
+ med_packet_num_in(i*3+2 downto i*3) <= med2int(i).packet_num;
+ med_dataready_in(i) <= med2int(i).dataready;
+ med_read_in(i) <= med2int(i).tx_read;
+ med_stat_op(i*16+15 downto i*16) <= med2int(i).stat_op;
+
+ int2med(i).data <= med_data_out(i*16+15 downto i*16);
+ int2med(i).packet_num <= med_packet_num_out(i*3+2 downto i*3);
+ int2med(i).dataready <= med_dataready_out(i);
+ int2med(i).ctrl_op <= med_ctrl_op(i*16+15 downto i*16);
+ end generate;
+
+ rdack <= ctrlbus_tx.ack or ctrlbus_tx.rack;
+ wrack <= ctrlbus_tx.ack or ctrlbus_tx.wack;
+
+---------------------------------------------------------------------------
+-- CTS
+---------------------------------------------------------------------------
+ THE_CTS : CTS
+ generic map (
+ EXTERNAL_TRIGGER_ID => ETM_ID, -- fill in trigger logic enumeration id of external trigger logic
+
+-- TRIGGER_COIN_COUNT => TRIGGER_COIN_COUNT,
+-- TRIGGER_PULSER_COUNT => TRIGGER_PULSER_COUNT,
+-- TRIGGER_RAND_PULSER => TRIGGER_RAND_PULSER,
+
+-- TRIGGER_INPUT_COUNT => 0, -- obsolete! now all inputs are routed via an input multiplexer!
+-- TRIGGER_ADDON_COUNT => TRIGGER_ADDON_COUNT,
+
+-- PERIPH_TRIGGER_COUNT => PERIPH_TRIGGER_COUNT,
+
+ OUTPUT_MULTIPLEXERS => CTS_OUTPUT_MULTIPLEXERS,
+
+-- ADDON_LINE_COUNT => CTS_ADDON_LINE_COUNT,
+ ADDON_GROUPS => 2,
+ ADDON_GROUP_UPPER => (1,17, others => 0)
+ )
+ port map (
+ CLK => clk_sys,
+ RESET => reset_i,
+
+ TRIGGER_BUSY_OUT => trigger_busy_i,
+ TIME_REFERENCE_OUT => cts_trigger_out,
+
+ ADDON_TRIGGERS_IN => cts_addon_triggers_in,
+ ADDON_GROUP_ACTIVITY_OUT => open,
+ ADDON_GROUP_SELECTED_OUT => open,
+
+ EXT_TRIGGER_IN => '0',
+ EXT_STATUS_IN => (others => '0'),
+ EXT_CONTROL_OUT => open,
+ EXT_HEADER_BITS_IN => (others => '0'),
+ EXT_FORCE_TRIGGER_INFO_IN => (others => '0'),
+
+ PERIPH_TRIGGER_IN => (others => '0'),
+
+ OUTPUT_MULTIPLEXERS_OUT => open,
+
+ CTS_TRG_SEND_OUT => cts_trg_send,
+ CTS_TRG_TYPE_OUT => cts_trg_type,
+ CTS_TRG_NUMBER_OUT => cts_trg_number,
+ CTS_TRG_INFORMATION_OUT => cts_trg_information,
+ CTS_TRG_RND_CODE_OUT => cts_trg_code,
+ CTS_TRG_STATUS_BITS_IN => cts_trg_status_bits,
+ CTS_TRG_BUSY_IN => cts_trg_busy,
+
+ CTS_IPU_SEND_OUT => cts_ipu_send,
+ CTS_IPU_TYPE_OUT => cts_ipu_type,
+ CTS_IPU_NUMBER_OUT => cts_ipu_number,
+ CTS_IPU_INFORMATION_OUT => cts_ipu_information,
+ CTS_IPU_RND_CODE_OUT => cts_ipu_code,
+ CTS_IPU_STATUS_BITS_IN => cts_ipu_status_bits,
+ CTS_IPU_BUSY_IN => cts_ipu_busy,
+
+ CTS_REGIO_ADDR_IN => buscts_rx.addr,
+ CTS_REGIO_DATA_IN => buscts_rx.data,
+ CTS_REGIO_READ_ENABLE_IN => buscts_rx.read,
+ CTS_REGIO_WRITE_ENABLE_IN => buscts_rx.write,
+ CTS_REGIO_DATA_OUT => buscts_tx.data,
+ CTS_REGIO_DATAREADY_OUT => buscts_tx.rack,
+ CTS_REGIO_WRITE_ACK_OUT => buscts_tx.wack,
+ CTS_REGIO_UNKNOWN_ADDR_OUT => buscts_tx.unknown,
+
+ LVL1_TRG_DATA_VALID_IN => cts_rdo_trg_data_valid,
+ LVL1_VALID_TIMING_TRG_IN => cts_rdo_valid_timing_trg,
+ LVL1_VALID_NOTIMING_TRG_IN => cts_rdo_valid_notiming_trg,
+ LVL1_INVALID_TRG_IN => cts_rdo_invalid_trg,
+
+ FEE_TRG_STATUSBITS_OUT => cts_rdo_trg_status_bits_cts,
+ FEE_DATA_OUT => cts_rdo_data,
+ FEE_DATA_WRITE_OUT => cts_rdo_write,
+ FEE_DATA_FINISHED_OUT => cts_rdo_finished
+ );
+
+
+ cts_addon_triggers_in(1 downto 0) <= SPARE_IN(1 downto 0);
+ cts_addon_triggers_in(17 downto 2) <= INP(79 downto 64);
+
+---------------------------------------------------------------------------
+-- TDC
+---------------------------------------------------------------------------
+
+
+
+---------------------------------------------------------------------------
+-- Bus Handler
+---------------------------------------------------------------------------
+ THE_BUS_HANDLER : entity work.trb_net16_regio_bus_handler_record
+ generic map(
+ PORT_NUMBER => 8,
+ PORT_ADDRESSES => (0 => x"d000", 1 => x"d300", 2 => x"b000", 3 => x"b200", 4 => x"b400", 5 => x"8100", 6 => x"8300", 7 => x"a000", others => x"0000"),
+ PORT_ADDR_MASK => (0 => 12, 1 => 1, 2 => 9, 3 => 9, 4 => 9, 5 => 8, 6 => 8, 7 => 11, others => 0),
+ PORT_MASK_ENABLE => 1
+ )
+ port map(
+ CLK => clk_sys,
+ RESET => reset_i,
+
+ REGIO_RX => handlerbus_rx,
+ REGIO_TX => ctrlbus_tx,
+
+ BUS_RX(0) => bustools_rx, --Flash, SPI, UART, ADC, SED
+ BUS_RX(1) => bustc_rx, --Clock switch
+ BUS_RX(2) => bussci1_rx, --SCI Serdes
+ BUS_RX(3) => bussci2_rx,
+ BUS_RX(4) => bussci3_rx,
+ BUS_RX(5) => busgbeip_rx,
+ BUS_RX(6) => busgbereg_rx,
+ BUS_RX(7) => buscts_rx,
+ BUS_TX(0) => bustools_tx,
+ BUS_TX(1) => bustc_tx,
+ BUS_TX(2) => bussci1_tx,
+ BUS_TX(3) => bussci2_tx,
+ BUS_TX(4) => bussci3_tx,
+ BUS_TX(5) => busgbeip_tx,
+ BUS_TX(6) => busgbereg_tx,
+ BUS_TX(7) => buscts_tx,
+ STAT_DEBUG => open
+ );
+
+ handlerbus_rx <= ctrlbus_rx when bus_master_active = '0' else bus_master_out;
+
+---------------------------------------------------------------------------
+-- Control Tools
+---------------------------------------------------------------------------
+ THE_TOOLS: entity work.trb3sc_tools
+ port map(
+ CLK => clk_sys,
+ RESET => reset_i,
+
+ --Flash & Reload
+ FLASH_CS => FLASH_CS,
+ FLASH_CLK => FLASH_CLK,
+ FLASH_IN => FLASH_OUT,
+ FLASH_OUT => FLASH_IN,
+ PROGRAMN => PROGRAMN,
+ REBOOT_IN => do_reboot_i,
+ --SPI
+ SPI_CS_OUT => spi_cs,
+ SPI_MOSI_OUT=> spi_mosi,
+ SPI_MISO_IN => spi_miso,
+ SPI_CLK_OUT => spi_clk,
+ --Header
+ HEADER_IO => HDR_IO,
+ --LCD
+ LCD_DATA_IN => open,
+ --ADC
+ ADC_CS => ADC_CS,
+ ADC_MOSI => ADC_DIN,
+ ADC_MISO => ADC_DOUT,
+ ADC_CLK => ADC_CLK,
+ --Trigger & Monitor
+ MONITOR_INPUTS => monitor_inputs_i,
+ TRIG_GEN_INPUTS => open,
+ TRIG_GEN_OUTPUTS => open,
+ --SED
+ SED_ERROR_OUT => sed_error_i,
+ --Slowcontrol
+ BUS_RX => bustools_rx,
+ BUS_TX => bustools_tx,
+ --Control master for default settings
+ BUS_MASTER_IN => ctrlbus_tx,
+ BUS_MASTER_OUT => bus_master_out,
+ BUS_MASTER_ACTIVE => bus_master_active,
+ DEBUG_OUT => open
+ );
+
+gen_reboot_no_gbe : if INCLUDE_GBE = c_NO generate
+ do_reboot_i <= common_ctrl_reg(15);
+end generate;
+gen_reboot_with_gbe : if INCLUDE_GBE = c_YES generate
+ do_reboot_i <= common_ctrl_reg(15) or reboot_from_gbe;
+end generate;
+
+---------------------------------------------------------------------------
+-- Switches
+---------------------------------------------------------------------------
+--Serdes Select
+ PCSSW_ENSMB <= '0';
+ PCSSW_EQ <= x"0";
+ PCSSW_PE <= x"F";
+ PCSSW <= "01001110"; --SFP2 on B3, AddOn on D1
+
+---------------------------------------------------------------------------
+-- I/O
+---------------------------------------------------------------------------
+ spi_miso(5 downto 4) <= DAC_IN_SDI(6 downto 5);
+ DAC_OUT_SCK(6 downto 5) <= spi_clk(5 downto 4);
+ DAC_OUT_CS(6 downto 5) <= spi_cs(5 downto 4);
+ DAC_OUT_SDO(6 downto 5) <= spi_mosi(5 downto 4);
+ spi_miso(3 downto 0) <= (others => '0');
+ spi_miso(15 downto 7) <= (others => '0');
+
+ RJ_IO(0) <= cts_trigger_out;
+
+---------------------------------------------------------------------------
+-- LED
+---------------------------------------------------------------------------
+ --LED are green, orange, red, yellow, white(2), rj_green(2), rj_red(2), sfp_green(2), sfp_red(2)
+ LED_GREEN <= debug_clock_reset(0);
+ LED_ORANGE <= debug_clock_reset(1);
+ LED_RED <= not sed_error_i;
+ LED_YELLOW <= debug_clock_reset(2);
+
+
+
+-- gen_hub_leds : for i in 1 to 4 generate
+-- LED_HUB_LINKOK(i) <= not med2int(i).stat_op(9);
+-- LED_HUB_TX(i) <= not (med2int(i).stat_op(10) or not med2int(i).stat_op(9));
+-- LED_HUB_RX(i) <= not (med2int(i).stat_op(11));
+-- end generate;
+
+-- LED_HUB_LINKOK(8) <= not med2int(7).stat_op(9) when INCLUDE_GBE = 0 else
+-- '1';
+-- LED_HUB_TX(8) <= not (med2int(7).stat_op(10) or not med2int(7).stat_op(9)) when INCLUDE_GBE = 0 else
+-- '1';
+-- LED_HUB_RX(8) <= not (med2int(7).stat_op(11)) when INCLUDE_GBE = 0 else
+--
+ LED_SFP_GREEN(0) <= --not med2int(8).stat_op(9) when INCLUDE_GBE = 0 else
+ '1';
+ LED_SFP_RED(0) <= --not (med2int(8).stat_op(10) or med2int(8).stat_op(11) or not med2int(8).stat_op(9)) when INCLUDE_GBE = 0 else
+ '1';
+
+ LED_SFP_GREEN(1) <= not med2int(0).stat_op(9) when USE_BACKPLANE = 0 and USE_ADDON = 0 else
+ '1';
+ LED_SFP_RED(1) <= not (med2int(0).stat_op(10) or med2int(0).stat_op(11) or not med2int(0).stat_op(9)) when USE_BACKPLANE = 0 and USE_ADDON = 0 else
+ '1';
+
+-- LED_WHITE(0) <= not med2int(10).stat_op(9) when INCLUDE_GBE = 0 and USE_BACKPLANE = 1 else
+-- not med2int(8).stat_op(9) when INCLUDE_GBE = 1 and USE_BACKPLANE = 1 else
+-- '1';
+-- LED_WHITE(1) <= not (med2int(10).stat_op(10) or med2int(10).stat_op(11) or not med2int(10).stat_op(9)) when INCLUDE_GBE = 0 and USE_BACKPLANE = 1 else
+-- not (med2int(8).stat_op(10) or med2int(8).stat_op(11) or not med2int(8).stat_op(9)) when INCLUDE_GBE = 1 and USE_BACKPLANE = 1 else
+-- '1';
+
+
+
+end architecture;
+
+
+
jspc29 / trb3sc.git / commitdiff