added config, mt

diff --git a/users/gsi_dlab_cbmpc26/init_trb046.sh b/users/gsi_dlab_cbmpc26/init_trb046.sh
new file mode 100755 (executable)
index 0000000..1e356d2
--- /dev/null
+++ b/users/gsi_dlab_cbmpc26/init_trb046.sh
@@ -0,0 +1,5 @@
+export TRB3_SERVER=trb046
+
+pkill -f "trbnetd -i 11"
+$HOME/trbsoft/trbnettools/trbnetd/server/trbnetd -i 11
+

diff --git a/users/gsi_dlab_cbmpc26/start_readout.pl b/users/gsi_dlab_cbmpc26/start_readout.pl
new file mode 100755 (executable)
index 0000000..09b0c39
--- /dev/null
+++ b/users/gsi_dlab_cbmpc26/start_readout.pl
@@ -0,0 +1,19 @@
+#!/usr/bin/perl
+
+use warnings;
+use strict;
+
+my $c;
+
+$c=q|pkill -f "daq_evtbuild -m 1"|;
+qx($c);
+
+$c=q|pkill -f "daq_netmem -m 1"|;
+qx($c);
+
+
+$c=q|xterm -geometry 122x14-0+0 -e bash -c 'daq_evtbuild -m 1 -d file -o /tmp'|;
+system("$c &");
+sleep 1;
+$c="xterm -geometry 82x10-0+210 -e bash -c 'daq_netmem -m 1 -i UDP:127.0.0.1:50000'";
+system("$c &");

diff --git a/users/gsi_dlab_cbmpc26/startup_trb046.sh b/users/gsi_dlab_cbmpc26/startup_trb046.sh
new file mode 100755 (executable)
index 0000000..27143e6
--- /dev/null
+++ b/users/gsi_dlab_cbmpc26/startup_trb046.sh
@@ -0,0 +1,61 @@
+# misc
+
+setxkbmap -option ctrl:nocaps
+xset -b 
+
+
+##### TRBNET #####
+# set the TRBNet addresses of the Endpoints
+trbcmd s 0xb000000390381d28 0 0x0200
+trbcmd s 0xa300000390381328 1 0x0201
+trbcmd s 0x4800000390381628 2 0x0202
+trbcmd s 0x1700000390382028 3 0x0203
+trbcmd s 0xdc00000390380c28 5 0x8000
+
+##### Ethernet and UDP #######
+trbcmd w 0x8000 0x8300 0x8000          # SubeventId         
+trbcmd w 0x8000 0x8301 0x00020001      # SubEventDecoding           
+trbcmd w 0x8000 0x8302 0x00030062      # Queue decoding             
+trbcmd w 0x8000 0x8303 0xea60         # max packet size             
+trbcmd w 0x8000 0x8304 0x2260         # max frame size      
+trbcmd w 0x8000 0x8305 0x1            # use GbE                     
+trbcmd w 0x8000 0x8306 0x0            # use TRBnet to send data
+trbcmd w 0x8000 0x8307 0x0            # Multi event queue size 
+trbcmd w 0x8000 0x8308 0xffffff               # Trigger counter             
+trbcmd w 0x8000 0x830b 0x7            # ??                  
+trbcmd w 0x8000 0x830d 0x0            # enable readout bit     
+
+#mac address of the EB
+# cbmpc026_eth0: 90:f6:52:03:8f:c4
+trbcmd w 0x8000 0x8100 0x52038fc4 # lower 4 bytes
+trbcmd w 0x8000 0x8101 0x90f6 #upper byte
+
+
+# destination port and source IP and so on
+trbcmd w 0x8000 0x8102 0xc0a80001     # destination IP-address: 192.168.0.1 
+trbcmd w 0x8000 0x8103 0xc350         # destination port                 
+trbcmd w 0x8000 0x8104 0xdead8001     # source MAC-address               
+trbcmd w 0x8000 0x8105 0x0230         # source MAC: upper bytes                  
+trbcmd w 0x8000 0x8106 0xc0a80072     # source IP                        
+trbcmd w 0x8000 0x8107 0xc350        # source Port                       
+trbcmd w 0x8000 0x8108 0x0578         # MTU                                 
+
+
+#####  TDC  #######
+# 0xfe48 is the broadcast address of TDC-endpoints in the system
+trbcmd w 0xfe48 0xc800 0x00000001 ## logic analyser control register
+trbcmd w 0xfe48 0xc801 0x020f0205 ## trigger window enable & trigger window width
+trbcmd w 0xfe48 0xc802 0x00000000 ## channel 01-31 enable
+trbcmd w 0xfe48 0xc803 0x00000000 ## channel 32-63 enable
+#trbcmd w 0xfe48 0xc8c4 0x00000080 ## enable number of words
+
+trbcmd w 0x0200 0xc802 0x00000000 ## channel 01-4  enable
+#trbcmd w 0x0200 0xc803 0xffffffff ## channel 32-63 enable
+
+trbcmd w 0x8000 0xa137 0xfffff  #set CTS pulser to 100Hz
+#trbcmd setbit 0x8000 0xa101 0x2 #enable pulser channel 0
+
+##### to disable/enable specific peripheral FPGAs ####
+# trbcmd w 0x8000 0xc0 0xf1
+# trbcmd w 0x8000 0xc1 0xf1
+# trbcmd w 0x8000 0xc3 0xf1