% \subsection{Preparation}
-The software is keep in CVS repository in GSI. You must fetch a few mandatory
-directories. This repository is closed and requires password. If you don't know it,
-contact with Michael Traxler (Ask Michael Traxler$\to$ AMT).
+The software is keep in a git repository with the master in Frankfurt. You must fetch a few mandatory
+directories. This repository is open and you don't need a password.
\begin{lstlisting}[label=,caption=Downloading the tools repositories]
$ cd ~
-$ cvs -d :ext:hadaq@lxi001.gsi.de:/misc/hadesprojects/daq/cvsroot co trbsoft
-$ cvs -d :ext:hadaq@lxi001.gsi.de:/misc/hadesprojects/daq/cvsroot co trb3/base
-$ cvs -d :ext:hadaq@lxi001.gsi.de:/misc/hadesprojects/daq/cvsroot co trb3/README
+$ git clone git://jspc29.x-matter.uni-frankfurt.de/projects/daqdocu
+$ git clone git://jspc29.x-matter.uni-frankfurt.de/projects/trbnettools
+$ git clone git://jspc29.x-matter.uni-frankfurt.de/projects/daqtools
+$ git clone git://jspc29.x-matter.uni-frankfurt.de/projects/daqdata
+
\end{lstlisting}
-% $ cvs -d :ext:hadaq@lxi001.gsi.de:/misc/hadesprojects/daq/cvsroot co hadaq
\begin{lstlisting}[label=,caption=Preparation of TRB3 tools]
$ cd ~/trbsoft/trbnettools
# we compile for TRB3
$ make distclean
$ make TRB3=1
-$ make TRB3=1 install # if you get error here due to no permissions
- # run it as a root
-$ sudo make TRB3=1 install # if it doesn't work,
- # contact your computer administrator for help
+$ sudo make TRB3=1 install # you need root to install the perl library part
# now export your binaries to PATH
-$ export PATH=${HOME}/trbsoft/trbnettools/binlocal:${PATH}
+$ export PATH=${HOME}/trbnettools/bin:${PATH}
# to make life easier add this line above to your profile to to env script
\end{lstlisting}
-% $ ln -s ~/trbsoft/trbnettools/binlocal/trbnetd ~/trbsoft/trbnettools/bin
-To prepare Event Builder you must fetch three directories from CVS, add
-execution permissions to configure scripts, run thm with proper parameters and
-compile and install libraries and binaries. On the end do not forget to export
-your new locations to \verb+$PATH+. The full procedure is shown in following
-snippet.
+To prepare Event Builder you must fetch via git the ``daqdata'' repository,
+run the build script. At the end do not forget to export your new locations to
+\verb+$PATH+. The full procedure is shown in following snippet.
% \begin{verbatim}
\begin{lstlisting}[label=,caption=Preparation of Event Builder]
-# mkdir ~/trbsoft/src
-$ cd ~/trbsoft/src
-$ cvs -d :ext:hadaq@lxi001.gsi.de:/misc/hadesprojects/daq/cvsroot co allParam hadaq compat
-$ chmod +x {allParam,compat,hadaq}/configure
-$ for ddd in allParam compat hadaq; do cd ~/trbsoft/src/${ddd}; CPPFLAGS="-I${HOME}/daqsoftware/include" LDFLAGS="-L${HOME}/daqsoftware/lib" ./configure --prefix=${HOME}/daqsoftware; make all install || break; done
-$ export PATH=${HOME}/daqsoftware/bin:${PATH}
-# this export salso can be add to profile or init script
+$ cd ~/
+$ git clone git://jspc29.x-matter.uni-frankfurt.de/projects/daqdata
+$ ./make_script.pl
+$ export PATH=${PATH}:${HOME}/daqdata/bin
+# this exports also can be added to profile or init script
\end{lstlisting}
% \end{verbatim}
-If you get error
+If you get errors like
\verb+evtbuild.c:46:38: fatal error: rawapin.h: No such file or directory+ then
edit file \verb+evtbuild.c+, comment out \verb+#define RFIO+ and repeat last
command (the \verb+for+ loop).
\begin{lstlisting}[label=lst:trb3user,caption=User scripts preparation]
$ cd ~
-$ wget http://www-linux.gsi.de/~rlalik/trb3userscripts.tar.gz
-$ tar zxvf trb3userscripts.tar.gz
+$ mkdir userscripts
\end{lstlisting}
-To adjust script to his system should edit file \verb+~/trb3user/setenv.sh+ and
-adjust paths to trb3 software
-\begin{lstlisting}[label=,caption=~/trb3user/setenv.sh - Variables to be adjusted]
-# normally HOME variable should host proper value
-#HOME=/home/hadaq # uncomment this line only if you kow what are you doing
+\begin{lstlisting}[label=,caption=~/userscripts/startup.sh - Variables to be adjusted]
+
+export TRB3_SERVER=trb046
+pkill -f \"trbnetd -i 11\"
+$HOME/trbnettools/trbnetd/server/trbnetd -i 11
-TRB3USER=${HOME}/trb3user
-TRBSOFT=${HOME}/trbsoft
-TRBNETTOOLS=${TRBSOFT}/trbnettools
-DAQSOFT=${HOME}/daqsoftware
\end{lstlisting}
+This script only has to be started if the server you are using to communicate
+with the TRB3 has been rebooted.
+
Usually no changes are required if all other software were installed in user's
\verb+${$HOME}+ directory (recommended way).
-This script should be run with command \verb+source ~/trb3user/setenv.sh+ in
-each new terminal supposed to work for TRB3.
+The following (as an example if your trbnetd runs with the id 11) should be
+added to your shells .rc-script, so for example .basrc or .zshrc:
-% \begin{lstlisting}[label=setenv,caption=\$\{HOME\}/trb3/setenv.sh]
-% #!/bin/bash
-% export PATH="${HOME}/daqsoftware/bin:${HOME}/trbsoft/trbnettools/binlocal:${PATH}"
-% \end{lstlisting}
\ No newline at end of file
+\begin{lstlisting}[label=,caption=.rc-file for your shell]
+export DAQOPSERVER=localhost:11
+export PATH=$PATH:~/trbnettools/bin
+export PATH=$PATH:~/daqdata/bin
+\end{lstlisting}
+
+The next task is to setup all necessary registers in the TRB3, which include
+TRBNet addresses and Ethernet-MAC-destination addresses.
+Example:
+
+\begin{lstlisting}[label=,caption=setup_trb46.sh]
+
+##### TRBNET #####
+# set the TRBNet addresses of the Endpoints
+trbcmd s 0xb000000390381d28 0 0x0200
+trbcmd s 0xa300000390381328 1 0x0201
+trbcmd s 0x4800000390381628 2 0x0202
+trbcmd s 0x1700000390382028 3 0x0203
+trbcmd s 0xdc00000390380c28 5 0x8000
+
+##### Ethernet and UDP #######
+trbcmd w 0x8000 0x8300 0x8000
+trbcmd w 0x8000 0x8301 0x00020001
+trbcmd w 0x8000 0x8302 0x00030062
+trbcmd w 0x8000 0x8303 0xea60
+trbcmd w 0x8000 0x8304 0x2260
+trbcmd w 0x8000 0x8305 0x1
+trbcmd w 0x8000 0x8306 0x0
+trbcmd w 0x8000 0x8307 0x0
+trbcmd w 0x8000 0x8308 0xffffff
+trbcmd w 0x8000 0x830b 0x7
+trbcmd w 0x8000 0x830d 0x0
+
+#mac address of the EB
+# cbmpc026_eth0: 90:f6:52:03:8f:c4
+trbcmd w 0x8000 0x8100 0x52038fc4 # lower 4 bytes
+trbcmd w 0x8000 0x8101 0x90f6 #upper byte
+
+# destination port and source IP and so on
+trbcmd w 0x8000 0x8102 0xc0a80101
+trbcmd w 0x8000 0x8103 0xc350
+trbcmd w 0x8000 0x8104 0xdead8001
+trbcmd w 0x8000 0x8105 0x0230
+trbcmd w 0x8000 0x8106 0xc0a80072
+trbcmd w 0x8000 0x8107 0xc350
+trbcmd w 0x8000 0x8108 0x0578
+
+
+##### TDC #######
+#trbcmd w 0xfe45 0xc0 0x00000001 ## logic analyser control register
+trbcmd w 0xfe45 0xc1 0x000f0005 ## trigger window enable & trigger window width
+trbcmd w 0xfe45 0xc2 0xffffffff ## channel 01-31 enable
+trbcmd w 0xfe45 0xc3 0xffffffff ## channel 32-63 enable
+
+\end{lstlisting}