--- /dev/null
+# Additional Register
+
+Address 0xd580
+
+ * Bit 0: LED off
+ * Bit 1: Select golden image (Switching to golden image is immediate, switching back takes the usual 10 s)
+ * Bit 27..24: Test signal to Pasttrec. If 0, calibration pulse can be sent
+ * Bit 31..30: Power off Pasttrec
* mount 2 screws to secure green power socket
* check R42 / R43 solder bridges
* remove metal cross from small cage
+* remove plastic caps from pinheaders
+* remove Kapton foil from Ethernet connector, put on the inside of small quadratic lid
* add serial number sticker
* connect 5V to pin 2 and GND to pin 3
* power consumption: ~ 950 mW
* serials/serials_powerdistributor.db
* test temperature sensor
* command: `./mdc_powerboard.pl -d 192.168.10.103 -b -1 -r 4`
+* ===================
* connect LVDS pulse generator to Reference time connector
* check all 20 outputs for proper signals
* mount to base plate
051 ac:0b:fb:18:03:bb
052 ac:0b:fb:17:d8:9b
053 ac:0b:fb:17:db:8b
+ 054 a8:48:fa:5f:26:d3
+ 055 a8:48:fa:5f:39:2b
+ 056 a8:48:fa:5f:21:fb
+ 057 ac:0b:fb:17:db:e3
+ 058 ac:0b:fb:17:cb:13
+ 059 a8:48:fa:5f:57:9f
+ 060 a8:48:fa:5f:36:fb
+ 061 a8:48:fa:5f:22:3f
+ 062 a8:48:fa:5f:41:8f
+ 063 a8:48:fa:5f:43:73
+ 064 a8:48:fa:5f:43:6f
+ 065 ac:0b:fb:17:d5:4b
+ 066 ac:0b:fb:16:aa:c7
+ 067 ac:0b:fb:19:16:97
+ 068 ac:0b:fb:16:cb:c7
+ 069 a8:48:fa:5f:20:a7
+ 070 a8:48:fa:5f:3e:ab
+ 071 a8:48:fa:5f:2f:9f
+ 072 ac:0b:fb:18:11:4b
+ 073 a8:48:fa:5f:3b:ab
+ 074 ac:0b:fb:16:8d:57
+ 075 a8:48:fa:5f:4a:df
+ 076 a8:48:fa:5f:54:17 #no temp sensor
+ 077 ac:0b:fb:16:cd:f7
+ 078 ac:0b:fb:16:89:0f
+ 079 ac:0b:fb:17:c6:5f
+ 080 a8:48:fa:5f:1e:a7 #no temp sensor
+ 081 a8:48:fa:5f:42:5f #no temp sensor