Update pinout files for all FPGA

diff --git a/pinout/combiner.lpf b/pinout/combiner.lpf
index 4f433a26483846c147789a5e112517ac2a2cb46b..67e221a2bcdd2aa9fada1f8057c3a7266548c444 100644 (file)
--- a/pinout/combiner.lpf
+++ b/pinout/combiner.lpf
@@ -12,7 +12,7 @@ BANK 8 VCCIO 3.3 V;
 LOCATE COMP "CLOCK_PCLK"                       SITE "U9";
 LOCATE COMP "CLOCK_PLL"                        SITE "U6";
 DEFINE PORT GROUP "CLK_group" "CL*" ;
-IOBUF GROUP  "CLK_group" IO_TYPE=LVDS  DIFFRESISTOR=100 BANK_VCCIO=2.5;
+IOBUF GROUP  "CLK_group" IO_TYPE=LVDS25  DIFFRESISTOR=100;
 
 LOCATE COMP "TRIGGER_OUT"            SITE "F3";
 LOCATE COMP "TRIGGER_TO_CTS"         SITE "M8";
@@ -25,10 +25,10 @@ LOCATE COMP "ADC_CS"                         SITE "AA3";
 LOCATE COMP "ADC_DIN"                        SITE "AB3";
 LOCATE COMP "ADC_DOUT"                       SITE "AB4";
 LOCATE COMP "ADC_CLK"                       SITE "AA4";
-IOBUF PORT  "ADC_CS" IO_TYPE=LVCMOS25  DRIVE=8 BANK_VCCIO=2.5;
-IOBUF PORT  "ADC_DIN" IO_TYPE=LVCMOS25  DRIVE=8 BANK_VCCIO=2.5;
-IOBUF PORT  "ADC_DOUT" IO_TYPE=LVCMOS25  BANK_VCCIO=2.5;
-IOBUF PORT  "ADC_CLK" IO_TYPE=LVCMOS25  DRIVE=8 BANK_VCCIO=2.5;
+IOBUF PORT  "ADC_CS" IO_TYPE=LVCMOS25  DRIVE=8 ;
+IOBUF PORT  "ADC_DIN" IO_TYPE=LVCMOS25  DRIVE=8 ;
+IOBUF PORT  "ADC_DOUT" IO_TYPE=LVCMOS25  ;
+IOBUF PORT  "ADC_CLK" IO_TYPE=LVCMOS25  DRIVE=8 ;
 
 
 LOCATE COMP "POWER_BOARD_IO_1"                SITE "AE3";
@@ -36,7 +36,7 @@ LOCATE COMP "POWER_BOARD_IO_2"                SITE "AE4";
 LOCATE COMP "POWER_BOARD_IO_3"                SITE "AC8";
 LOCATE COMP "POWER_BOARD_IO_4"                SITE "AC9";
 DEFINE PORT GROUP "POWER_group" "POWER*" ;
-IOBUF GROUP  "POWER_group" IO_TYPE=LVCMOS25 BANK_VCCIO=2.5;
+IOBUF GROUP  "POWER_group" IO_TYPE=LVCMOS25 ;
 
 
 LOCATE COMP "LED_RJ_GREEN_0"                 SITE "C25";
@@ -50,14 +50,14 @@ LOCATE COMP "LED_RJ_GREEN_1"                 SITE "G26";
 LOCATE COMP "LED_RJ_RED_1"                   SITE "G25";
 LOCATE COMP "LED_YELLOW"                     SITE "K24";
 DEFINE PORT GROUP "LED_group" "LED*" ;
-IOBUF GROUP  "LED_group" IO_TYPE=LVCMOS25  DRIVE=8 BANK_VCCIO=3.3;
+IOBUF GROUP  "LED_group" IO_TYPE=LVCMOS25  DRIVE=8 ;
 
 
 LOCATE COMP "POWER_GOOD"                   SITE "C9";
 IOBUF PORT  "POWER_GOOD" IO_TYPE=LVTTL33;
 
 LOCATE COMP "CLOCK_SELECT_IN"           SITE "M2";
-IOBUF PORT  "CLOCK_SELECT_IN" IO_TYPE=LVCMOS25 BANK_VCCIO=2.5;
+IOBUF PORT  "CLOCK_SELECT_IN" IO_TYPE=LVCMOS25 ;
 
 LOCATE COMP "TEMPSENS"                     SITE "J13";
 IOBUF  PORT "TEMPSENS" IO_TYPE=LVTTL33 PULLMODE=UP DRIVE=8  ;
@@ -86,7 +86,7 @@ LOCATE COMP "RJ45_SIG_3"                    SITE "G2";
 LOCATE COMP "RJ45_SIG_4"                    SITE "K6";
 LOCATE COMP "RJ45_SIG_5"                    SITE "K7";
 DEFINE PORT GROUP "RJ45_SIG_group" "RJ45_SIG*" ;
-IOBUF GROUP  "RJ45_SIG_group" IO_TYPE=LVDS  DIFFRESISTOR=100 BANK_VCCIO=2.5;
+IOBUF GROUP  "RJ45_SIG_group" IO_TYPE=LVDS25  DIFFRESISTOR=100 ;
 
 
 

diff --git a/pinout/dirich.lpf b/pinout/dirich.lpf
index e31383d27a0ab5d72b0d47faae89b10d5e3c8fad..a7862641adeeb57b5476facdba821f4813be9f18 100644 (file)
--- a/pinout/dirich.lpf
+++ b/pinout/dirich.lpf
@@ -154,3 +154,21 @@ LOCATE COMP "TEST_LINE[13]"                         SITE "P4";
 LOCATE COMP "TEST_LINE[14]"                         SITE "N1";
 DEFINE PORT GROUP "TEST_group" "TEST*" ;
 IOBUF GROUP  "TEST_group" IO_TYPE=LVCMOS25  DRIVE=8 BANK_VCCIO=2.5;
+
+
+LOCATE COMP "MISO_IN_1"          SITE "E7";    #DAC1_CTRL0
+LOCATE COMP "MISO_IN_2"          SITE "A17";   #DAC2_CTRL0
+LOCATE COMP "MOSI_OUT_1"         SITE "D7";    #DAC1_CTRL1
+LOCATE COMP "MOSI_OUT_2"         SITE "A18";   #DAC2_CTRL1
+LOCATE COMP "SCLK_OUT_1"         SITE "E6";    #DAC1_CTRL2
+LOCATE COMP "SCLK_OUT_2"         SITE "B19";   #DAC2_CTRL2
+LOCATE COMP "CS_OUT_1"           SITE "D6";    #DAC1_CTRL3
+LOCATE COMP "CS_OUT_2"           SITE "B18";   #DAC2_CTRL3
+IOBUF PORT "MISO_IN_1  " IO_TYPE=LVCMOS25 PULLMODE=UP;
+IOBUF PORT "MOSI_OUT_1"  IO_TYPE=LVCMOS25 DRIVE=4 SLEWRATE=SLOW;
+IOBUF PORT "SCLK_OUT_1"  IO_TYPE=LVCMOS25 DRIVE=4 SLEWRATE=SLOW;
+IOBUF PORT "CS_OUT_1"    IO_TYPE=LVCMOS25 DRIVE=4 SLEWRATE=SLOW;
+IOBUF PORT "MISO_IN_2  " IO_TYPE=LVCMOS25 PULLMODE=UP;
+IOBUF PORT "MOSI_OUT_2"  IO_TYPE=LVCMOS25 DRIVE=4 SLEWRATE=SLOW;
+IOBUF PORT "SCLK_OUT_2"  IO_TYPE=LVCMOS25 DRIVE=4 SLEWRATE=SLOW;
+IOBUF PORT "CS_OUT_2"    IO_TYPE=LVCMOS25 DRIVE=4 SLEWRATE=SLOW;

diff --git a/pinout/thresholds.lpf b/pinout/thresholds.lpf
index 8c6a5a246d0beadfaf0394a256daa1671e49fae9..f6f3b6ca3fba9325b211d8fcc94cfca630e6addd 100644 (file)
--- a/pinout/thresholds.lpf
+++ b/pinout/thresholds.lpf
@@ -1,42 +1,56 @@
+COMMERCIAL ;
 BLOCK RESETPATHS ;
 BLOCK ASYNCPATHS ;
-#LOCATE COMP "rstn" SITE "B3" ;
-LOCATE COMP "LED[0]" SITE "H11" ;
-LOCATE COMP "LED[1]" SITE "J13" ;
-LOCATE COMP "LED[2]" SITE "J11" ;
-LOCATE COMP "LED[3]" SITE "L12" ;
-LOCATE COMP "LED[4]" SITE "K11" ;
-LOCATE COMP "LED[5]" SITE "L13" ;
-LOCATE COMP "LED[6]" SITE "N15" ;
-LOCATE COMP "LED[7]" SITE "P16" ;
-#LOCATE COMP "DIPSW[0]" SITE "N2" ;
-#LOCATE COMP "DIPSW[1]" SITE "P1" ;
-#LOCATE COMP "DIPSW[2]" SITE "M3" ;
-#LOCATE COMP "DIPSW[3]" SITE "N1" ;
-#LOCATE COMP "clk_x1" SITE "C8" ;
-#FREQUENCY PORT "clk_x1" 12.000000 MHz ;
-#IOBUF PORT "clk_x1" PULLMODE=NONE IO_TYPE=LVCMOS33 ;
-#IOBUF PORT "DIPSW[3]" PULLMODE=UP IO_TYPE=LVCMOS33 ;
-#IOBUF PORT "DIPSW[0]" PULLMODE=UP IO_TYPE=LVCMOS33 ;
-#IOBUF PORT "DIPSW[1]" PULLMODE=UP IO_TYPE=LVCMOS33 ;
-#IOBUF PORT "DIPSW[2]" PULLMODE=UP IO_TYPE=LVCMOS33 ;
-#IOBUF PORT "rstn" PULLMODE=UP IO_TYPE=LVCMOS33 ;
-IOBUF PORT "LED[0]" PULLMODE=UP IO_TYPE=LVCMOS33 ;
-IOBUF PORT "LED[1]" PULLMODE=UP IO_TYPE=LVCMOS33 ;
-IOBUF PORT "LED[2]" PULLMODE=UP IO_TYPE=LVCMOS33 ;
-IOBUF PORT "LED[3]" PULLMODE=UP IO_TYPE=LVCMOS33 ;
-IOBUF PORT "LED[4]" PULLMODE=UP IO_TYPE=LVCMOS33 ;
-IOBUF PORT "LED[5]" PULLMODE=UP IO_TYPE=LVCMOS33 ;
-IOBUF PORT "LED[6]" PULLMODE=UP IO_TYPE=LVCMOS33 ;
-IOBUF PORT "LED[7]" PULLMODE=UP IO_TYPE=LVCMOS33 ;
-SYSCONFIG MCCLK_FREQ=133 MASTER_SPI_PORT=DISABLE CONFIGURATION=CFG ;
+SYSCONFIG MCCLK_FREQ=33 BACKGROUND_RECONFIG=ON ENABLE_TRANSFR=ENABLE MUX_CONFIGURATION_PORTS=ENABLE ;
 
-LOCATE COMP "MISO_OUT" SITE "A4";
-LOCATE COMP "MOSI_IN"  SITE "B4";
-LOCATE COMP "SCLK_IN"  SITE "B5";
-LOCATE COMP "CS_IN"    SITE "B6";
 
-IOBUF PORT "MISO_OUT" PULLMODE=UP     IO_TYPE=LVCMOS33;
-IOBUF PORT "MOSI_IN"  PULLMODE=DOWN   IO_TYPE=LVCMOS33;
-IOBUF PORT "SCLK_IN"  PULLMODE=DOWN   IO_TYPE=LVCMOS33;
-IOBUF PORT "CS_IN"    PULLMODE=DOWN   IO_TYPE=LVCMOS33;
\ No newline at end of file
+LOCATE COMP "MISO_OUT"                       SITE "E1";    #DAC1_CTRL0
+LOCATE COMP "MOSI_IN"                        SITE "F1";    #DAC1_CTRL1
+LOCATE COMP "SCLK_IN"                        SITE "D9";    #DAC1_CTRL2
+LOCATE COMP "CS_IN"                          SITE "G9";    #DAC1_CTRL3
+IOBUF PORT "MISO_OUT" IO_TYPE=LVCMOS25 DRIVE=4 SLEWRATE=SLOW;
+IOBUF PORT "MOSI_IN"  IO_TYPE=LVCMOS25 PULLMODE=UP;
+IOBUF PORT "SCLK_IN"  IO_TYPE=LVCMOS25 PULLMODE=UP;
+IOBUF PORT "CS_IN"    IO_TYPE=LVCMOS25 PULLMODE=UP;
+
+
+LOCATE COMP "OUTPUT[1]"         SITE "C1";
+LOCATE COMP "OUTPUT[2]"         SITE "J3";
+LOCATE COMP "OUTPUT[3]"         SITE "J7";
+LOCATE COMP "OUTPUT[4]"         SITE "B1";
+LOCATE COMP "OUTPUT[5]"         SITE "A2";
+LOCATE COMP "OUTPUT[6]"         SITE "A8";
+LOCATE COMP "OUTPUT[7]"         SITE "A3";
+LOCATE COMP "OUTPUT[8]"         SITE "H9";
+LOCATE COMP "OUTPUT[9]"         SITE "A5";
+LOCATE COMP "OUTPUT[10]"        SITE "A6";
+LOCATE COMP "OUTPUT[11]"        SITE "B9";
+LOCATE COMP "OUTPUT[12]"        SITE "J8";
+LOCATE COMP "OUTPUT[13]"        SITE "J6";
+LOCATE COMP "OUTPUT[14]"        SITE "J5";
+LOCATE COMP "OUTPUT[15]"        SITE "J2";
+LOCATE COMP "OUTPUT[16]"        SITE "H1";
+DEFINE PORT GROUP "OUTPUT_group" "OUTPUT*" ;
+IOBUF GROUP  "OUTPUT_group" IO_TYPE=LVCMOS25  DRIVE=4 SLEWRATE=SLOW BANK_VCCIO=2.5 ;
+
+###
+LOCATE COMP "DAC_FLAG"                       SITE "G1";
+IOBUF PORT "DAC_FLAG" IO_TYPE=LVCMOS25 PULLMODE=UP;
+
+
+# LOCATE COMP "PWM_IN17" 1                      SITE "A6";
+# LOCATE COMP "PWM_IN18" 2                      SITE "A5";
+# LOCATE COMP "PWM_IN19" 3                      SITE "A3";
+# LOCATE COMP "PWM_IN20" 4                      SITE "A8";
+# LOCATE COMP "PWM_IN21" 5                      SITE "B1";
+# LOCATE COMP "PWM_IN22" 6                      SITE "H9";
+# LOCATE COMP "PWM_IN23" 7                      SITE "B9";
+# LOCATE COMP "PWM_IN24" 8                      SITE "J7";
+# LOCATE COMP "PWM_IN25" 9                      SITE "J8";
+# LOCATE COMP "PWM_IN26" 10                      SITE "J2";
+# LOCATE COMP "PWM_IN27" 11                      SITE "H1";
+# LOCATE COMP "PWM_IN28" 12                      SITE "J5";
+# LOCATE COMP "PWM_IN29" 13                      SITE "J3";
+# LOCATE COMP "PWM_IN30" 14                      SITE "J6";
+# LOCATE COMP "PWM_IN31" 15                      SITE "C1";
+# LOCATE COMP "PWM_IN32" 16                      SITE "A2";