added working scurve script for current VHDL code in repo

diff --git a/tools/scurve_control.sh b/tools/scurve_control.sh
new file mode 100755 (executable)
index 0000000..34ecb9e
--- /dev/null
+++ b/tools/scurve_control.sh
@@ -0,0 +1,134 @@
+#!/bin/bash
+
+## Uncomment the following line to debug this script:
+#set -x
+
+### ------------ Interpret the command line arguments ------------
+
+usage () { echo -e "\nUsage: ./scurve_new2.sh [ELab/Vacuum] [Number of Runs] [Step Size]\n"; }
+
+if [ -z "$1" ]  # check if first parameter is empty
+then
+  usage
+  echo Error: Specify the system! Use Vacuum or ELab as first parameter.
+  exit -1
+fi
+
+if [ $1 == 'ELab' ]
+then
+  printf -v trbaddr '%s' '0xd882'
+  export DAQOPSERVER=localhost:88
+elif [ $1 == 'Vacuum' ]
+then
+  printf -v trbaddr '%s' '0xd000'
+  export DAQOPSERVER=localhost:7
+else
+  echo Error: system unspecified! Use ELab or Vacuum as the first parameter.
+  exit -1
+fi
+
+if [ -z "$2" ]  # check if second parameter is empty
+then
+  echo Error: run-parameter is empty! Specify the number of runs as second parameter.
+  exit -1;
+elif [ $2 \< 0 ]  # check if second parameter is positive
+then
+  echo Error: run-parameter $2 needs to be positive!
+  exit -1;
+else
+  if ! printf -v numruns '%d' $2  # check if second parameter is a number and store it to the numruns variable
+  then
+    echo Error: $2 is not a number!
+    exit -1;
+  fi
+fi
+
+if [ -z "$3" ]  # check if second parameter is empty
+then
+  echo Error: Specify the step size as third parameter.
+  exit -1;
+elif [ $2 \< 1 ]  # check if second parameter is positive
+then
+  echo Error: step-size parameter $3 needs to be positive!
+  exit -1;
+else
+  if ! printf -v stepsize '%d' $3  # check if second parameter is a number and store it to the stepsize variable
+  then
+    echo Error: $3 is not a number!
+    exit -1;
+  fi
+fi
+
+
+### ------------------------------------------------------------------
+
+# Setting up general properties of the ROC:
+
+# trbcmd w $trbaddr 0x8002 0xaaa0aaa0 # set sensor ID for sensor 0
+# trbcmd w $trbaddr 0x8402 0xbbb0bbb0 # set sensor ID for sensor 1
+trbcmd w $trbaddr 0x8001 0x1 # set testmode   was 8006
+
+trbcmd w 0x8880 0xc0 0xf4
+trbcmd w 0x8880 0xc1 0xf4
+trbcmd w 0x8880 0xc3 0xf4
+
+
+# Starting the configuration / readout cycles
+
+for BANK in 0
+do
+echo -e "\nBank $BANK"
+for i in $(seq 180 $stepsize 240)
+do
+  echo Threshold $i
+
+  printf -v threshhex '%02x' $i
+
+  trbcmd w $trbaddr 0x8002 0x1 # set soft reset to 1 (skip run 0)    was 8005
+
+  # change sensor settings, i.e. thresholds to $i
+    if [[ $BANK -eq 0 ]]; then
+    #echo "DAC_BIAS/IVDREF1A=$i;DAC_BIAS/IVDREF1B=$i;DAC_BIAS/IVDREF1C=$i;DAC_BIAS/IVDREF1D=$i;DIS_DISCRI/DisDiscri=0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000000000000000000000000000" | ./changeConfigVal.pl -c /local.1/htdocs/mvdconfig/config/sensorE0scurve2.xml
+    echo "DAC_BIAS/IVDREF1A=$i;DAC_BIAS/IVDREF1B=255;DAC_BIAS/IVDREF1C=255;DAC_BIAS/IVDREF1D=255" | ./changeConfigVal.pl -c /local.1/htdocs/mvdconfig/config/sensorE0scurve2.xml
+  elif [[ $BANK -eq 1 ]]; then
+    echo "DAC_BIAS/IVDREF1A=255;DAC_BIAS/IVDREF1B=$i;DAC_BIAS/IVDREF1C=255;DAC_BIAS/IVDREF1D=255" | ./changeConfigVal.pl -c /local.1/htdocs/mvdconfig/config/sensorE0scurve2.xml
+  elif [[ $BANK -eq 2 ]]; then
+    echo "DAC_BIAS/IVDREF1A=255;DAC_BIAS/IVDREF1B=255;DAC_BIAS/IVDREF1C=$i;DAC_BIAS/IVDREF1D=255" | ./changeConfigVal.pl -c /local.1/htdocs/mvdconfig/config/sensorE0scurve2.xml
+  elif [[ $BANK -eq 3 ]]; then
+    echo "DAC_BIAS/IVDREF1A=255;DAC_BIAS/IVDREF1B=255;DAC_BIAS/IVDREF1C=255;DAC_BIAS/IVDREF1D=$i" | ./changeConfigVal.pl -c /local.1/htdocs/mvdconfig/config/sensorE0scurve2.xml
+  fi
+
+  # programming the sensor via JTAG
+  if [ $1 == 'Vacuum' ]
+  then
+    ./init_setup.pl /local.1/htdocs/mvdconfig/setup/scurve2_setup.xml
+   #./init_setup.pl /local.1/htdocs/mvdconfig/setup/scurve2_setup.xml
+  elif [ $1 == 'ELab' ]
+  then
+    ./init_setup.pl /local.1/htdocs/mvdconfig/setup/scurve2_setup_ELab2.xml
+    #./startup.pl /local.1/htdocs/mvdconfig/setup/scurve2_setup_ELab2.xml
+  fi
+  sleep 0.3 # wait until the run is finished (throw away data, because dirty)
+
+  # Start taking data and cycle through runs:
+  for j in $(seq 1 1 $numruns) # for all runs, to gather statistics
+  do
+    echo "run $j"
+
+    printf -v runhex '%05x' $j
+    check="0"
+    #while [ "$check" -eq "0" ]; do
+      trbcmd w $trbaddr 0x8002 0x1 # reset the FPGA buffers   was 8005
+     # result=$(trbcmd r $trbaddr 0x8005)
+     # check=${result:17:1}
+      echo "attempting soft-reset..."
+    #done
+    trbcmd w $trbaddr 0x8002 0x0 # clear the previous reset   was 8005
+    trbcmd w $trbaddr 0x8003 0x$threshhex$BANK$runhex # write current scan parameters to ROC-FPGA (later in data) was 8007
+
+    trbcmd w $trbaddr 0xb00b 0x1 # start the next run in the s-curve mode
+    sleep 0.3 # wait until run is finished
+  done
+
+done
+done