for loop to cycle through banks A,B,C,D

diff --git a/s-curves/scurve.sh b/s-curves/scurve.sh
index 47577569364030076e34b6d07d317d8b5889e071..9c9b407b634ae9321f373db83e48f0977f80eef2 100755 (executable)
--- a/s-curves/scurve.sh
+++ b/s-curves/scurve.sh
@@ -69,7 +69,10 @@ trbcmd w $trbaddr 0x8006 0x1 # set testmode
 
 ### ------------ start data taking ------------
 
-echo Bank A
+
+for BANK in A B C D
+do
+echo $BANK
 for i in `seq 0 $stepsize 255`
 do
   trbcmd w $trbaddr 0x8005 0x1 # set soft reset to 1 (skip run 0)
@@ -77,10 +80,18 @@ do
   printf -v hex '%04x' $i
   printf -v param '%04x' 0
   trbcmd w $trbaddr 0x8007 0x$hex$param # write external info to FPGA (ROC) which is the pair "threshold - run"
-  # so I know the scanning parameters for every frame
-  # TEST DISCRI A ONLY: echo "DAC_BIAS/IVDREF1A=$i;DAC_BIAS/IVDREF1B=255;DAC_BIAS/IVDREF1C=255;DAC_BIAS/IVDREF1D=255" | ./changeConfigVal.pl -c /local.1/htdocs/mvdconfig/config/sensorE0scurve2.xml
-  #echo "DAC_BIAS/IVDREF1A=$i;DAC_BIAS/IVDREF1B=$i;DAC_BIAS/IVDREF1C=$i;DAC_BIAS/IVDREF1D=$i;DIS_DISCRI/DisDiscri=0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000000000000000000000000000" | ./changeConfigVal.pl -c /local.1/htdocs/mvdconfig/config/sensorE0scurve2.xml
-  echo "DAC_BIAS/IVDREF1A=$i;DAC_BIAS/IVDREF1B=255;DAC_BIAS/IVDREF1C=255;DAC_BIAS/IVDREF1D=255" | ./changeConfigVal.pl -c /local.1/htdocs/mvdconfig/config/sensorE0scurve2.xml
+  if [ "$BANK" = "A" ]; then
+    # so I know the scanning parameters for every frame
+    # TEST DISCRI A ONLY: echo "DAC_BIAS/IVDREF1A=$i;DAC_BIAS/IVDREF1B=255;DAC_BIAS/IVDREF1C=255;DAC_BIAS/IVDREF1D=255" | ./changeConfigVal.pl -c /local.1/htdocs/mvdconfig/config/sensorE0scurve2.xml
+    #echo "DAC_BIAS/IVDREF1A=$i;DAC_BIAS/IVDREF1B=$i;DAC_BIAS/IVDREF1C=$i;DAC_BIAS/IVDREF1D=$i;DIS_DISCRI/DisDiscri=0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000000000000000000000000000" | ./changeConfigVal.pl -c /local.1/htdocs/mvdconfig/config/sensorE0scurve2.xml
+    echo "DAC_BIAS/IVDREF1A=$i;DAC_BIAS/IVDREF1B=255;DAC_BIAS/IVDREF1C=255;DAC_BIAS/IVDREF1D=255" | ./changeConfigVal.pl -c /local.1/htdocs/mvdconfig/config/sensorE0scurve2.xml
+  elif [ "$BANK" = "B" ]; then
+    echo "DAC_BIAS/IVDREF1A=255;DAC_BIAS/IVDREF1B=$i;DAC_BIAS/IVDREF1C=255;DAC_BIAS/IVDREF1D=255" | ./changeConfigVal.pl -c /local.1/htdocs/mvdconfig/config/sensorE0scurve2.xml
+  elif [ "$BANK" = "C" ]; then
+    echo "DAC_BIAS/IVDREF1A=255;DAC_BIAS/IVDREF1B=255;DAC_BIAS/IVDREF1C=$i;DAC_BIAS/IVDREF1D=255" | ./changeConfigVal.pl -c /local.1/htdocs/mvdconfig/config/sensorE0scurve2.xml
+  elif [ "$BANK" = "D" ]; then
+    echo "DAC_BIAS/IVDREF1A=255;DAC_BIAS/IVDREF1B=255;DAC_BIAS/IVDREF1C=255;DAC_BIAS/IVDREF1D=$i" | ./changeConfigVal.pl -c /local.1/htdocs/mvdconfig/config/sensorE0scurve2.xml
+  fi
   # change sensor settings, i.e. thresholds to $i
 
   if [ $1 == 'Vacuum' ]
@@ -112,3 +123,4 @@ do
   done
 
 done
+done