use Term::ANSIColor qw(:constants);
use Cwd;
- my $FAMILYNAME="LatticeECP3";
- my $DEVICENAME="LFE3-150EA";
- my $PACKAGE="FPBGA1156";
- my $SPEEDGRADE="8";
+###################################################################################
+#Settings for this project
- my $synplify_locale_workaround = "C";
++my $FAMILYNAME = "LatticeECP3";
++my $DEVICENAME = "LFE3-150EA";
++my $PACKAGE = "FPBGA1156";
++my $SPEEDGRADE = "8";
+
+my %config = do "config_compile.pl";
+
+my $TOPNAME = $config{TOPNAME};
+my $lattice_path = $config{lattice_path};
+my $synplify_path = $config{synplify_path};
+my $lm_license_file_for_synplify = $config{lm_license_file_for_synplify};
+my $lm_license_file_for_par = $config{lm_license_file_for_par};
+my $synplify_command = $config{synplify_command};
+
+#my $synplify_locale_workaround = "en_US\@UTF-8";
- my $include_TDC = $config{include_TDC} || 0;
- my $include_GBE = $config{include_GBE} || 0;
- my $include_CTS = $config{include_CTS} || 0;
- my $include_HUB = $config{include_HUB} || 0;
- my $twr_number_of_errors = $config{twr_number_of_errors} || 10;
- my $pinout_file = $config{pinout_file} || $TOPNAME;
- my $nodelist_file = $config{nodelist_file} || 'nodelist.txt';
- my $par_options = $config{par_options};
++my $synplify_locale_workaround = "C";
+my $lattice_bin_path = "$lattice_path/bin/lin64"; # note the lin/lin64 at the end, no isfgpa needed
+
++my $include_TDC = $config{include_TDC} || 0;
++my $include_GBE = $config{include_GBE} || 0;
++my $include_CTS = $config{include_CTS} || 0;
++my $include_HUB = $config{include_HUB} || 0;
++my $twr_number_of_errors = $config{twr_number_of_errors} || 10;
++my $pinout_file = $config{pinout_file} || $TOPNAME;
++my $nodelist_file = $config{nodelist_file} || 'nodelist.txt';
++my $par_options = $config{par_options};
+
+$FAMILYNAME = $config{Familyname} if $config{Familyname};
+$DEVICENAME = $config{Devicename} if $config{Devicename};
+$PACKAGE = $config{Package} if $config{Package};
+$SPEEDGRADE = $config{Speedgrade} if $config{Speedgrade};
+###################################################################################
+
###################################################################################
#Options for the script
my $help = "";
--my $isMultiPar = 0; # set it to zero for single par run on the local machine
--my $nrNodes = 0; # set it to one for single par run on the local machine
++my $isMultiPar = 0; # set it to zero for single par run on the local machine
++my $nrNodes = 0; # set it to one for single par run on the local machine
my $all = 1;
my $syn = 0;
my $map = 0;
my $bitgen = 0;
my $con = 0;
my $guidefile = 0;
++my $parallel = '';
my $compile_all = 0;
-my $design = "";
my $result = GetOptions (
-- "h|help" => \$help,
-- "m|mpar=i" => \$nrNodes,
-- "a|all" => \$all,
-- "c|con" => \$con,
-- "s|syn" => \$syn,
-- "mp|map" => \$map,
-- "p|par" => \$par,
-- "t|timing" => \$timing,
-- "b|bitgen" => \$bitgen,
-- "g|guide" => \$guidefile,
- "d|design=s" => \$design,
++ "h|help" => \$help,
++ "m|mpar=i" => \$nrNodes,
++ "a|all" => \$all,
++ "c|con" => \$con,
++ "s|syn" => \$syn,
++ "mp|map" => \$map,
++ "p|par" => \$par,
++ "t|timing" => \$timing,
++ "b|bitgen" => \$bitgen,
++ "g|guide" => \$guidefile,
++ "mc|multicore" => \$parallel
);
if ($help) {
if ($con!=0 || $syn!=0 || $map!=0 || $par!=0 || $timing!=0 || $bitgen!=0) {
$all=0;
}
-###################################################################################
-
-###################################################################################
-#Settings for this project
-my %config = do "config_compile.pl";
-
-
-my $TOPNAME = $design || $config{TOPNAME};
-my $project_path = $config{project_path};
-my $lattice_path = $config{lattice_path};
-my $synplify_path = $config{synplify_path};
-my $lm_license_file_for_synplify = $config{lm_license_file_for_synplify};
-my $lm_license_file_for_par = $config{lm_license_file_for_par};
-my $synplify_command = $config{synplify_command};
-
-#my $synplify_locale_workaround = "en_US\@UTF-8";
-my $synplify_locale_workaround = "C";
-my $lattice_bin_path = "$lattice_path/bin/lin64"; # note the lin/lin64 at the end, no isfgpa needed
++$parallel = '&' if $parallel;
+
-my $include_TDC = $config{include_TDC} || 0;
-my $include_GBE = $config{include_GBE} || 0;
-my $include_CTS = $config{include_CTS} || 0;
-my $include_HUB = $config{include_HUB} || 0;
-my $twr_number_of_errors = $config{twr_number_of_errors} || 10;
-#my $pinout_file = $config{pinout_file} || $TOPNAME;
-my $nodelist_file = $config{nodelist_file};
-my $par_options = $config{par_options};
###################################################################################
-
# source the standard lattice environment
$ENV{bindir}="$lattice_bin_path";
-#open my $SOURCE, "bash -c '. $lattice_bin_path/diamond_env >& /dev/null; env'|" or
-# die "Can't fork: $!";
-#while (<$SOURCE>) {
-# if (/^(.*)=(.*)/) {
-# $ENV{$1} = ${2} ;
-# }
-#}
-#close $SOURCE;
-
-
-my %FPGA=(
- trb3_periph_32PinAddOn =>{family=>"LatticeECP3", device=>"LFE3-150EA", speed=>"8", package=>"FPBGA672", path=>"32PinAddOn"},
- trb3_periph_ADA =>{family=>"LatticeECP3", device=>"LFE3-150EA", speed=>"8", package=>"FPBGA672", path=>"ADA_Addon"},
- trb3_periph_gpin =>{family=>"LatticeECP3", device=>"LFE3-150EA", speed=>"8", package=>"FPBGA672", path=>"gpin"},
- trb3_periph_padiwa =>{family=>"LatticeECP3", device=>"LFE3-150EA", speed=>"8", package=>"FPBGA672", path=>"wasa"},
- trb3_periph_hadesstart =>{family=>"LatticeECP3", device=>"LFE3-150EA", speed=>"8", package=>"FPBGA672", path=>"hadesstart"},
- trb3_periph_hub =>{family=>"LatticeECP3", device=>"LFE3-150EA", speed=>"8", package=>"FPBGA672", path=>"hub"},
- trb3_central_cts =>{family=>"LatticeECP3", device=>"LFE3-150EA", speed=>"8", package=>"FPBGA1156", path=>"cts"},
- trb3_central_gbe =>{family=>"LatticeECP3", device=>"LFE3-150EA", speed=>"8", package=>"FPBGA1156", path=>"trb3_gbe"},
- cbmtof =>{family=>"LatticeECP3", device=>"LFE3-150EA", speed=>"8", package=>"FPBGA672", path=>"cbmtof"},
-# trb3sc =>{family=>"LatticeECP3", device=>"LFE3-150EA", speed=>"8", package=>"FPBGA1156", path=>"../trb3sc/tdctemplate"},
-# dirich =>{family=>"ECP5UM", device=>"LFE5UM-85F", speed=>"8", package=>"BG381C", path=>"../dirich/dirich"},
- );
-
-compile();
-
-
-sub compile {
- unless (defined $FPGA{$TOPNAME}) {
- print RED, "Project $TOPNAME is not defined. Please edit the FPGA details in the compile script.\n", RESET;
- exit 129;
- }
- if ($design) {
- $project_path = $FPGA{$TOPNAME}{path};
- }
-
- $ENV{'PAR_DESIGN_NAME'}=$TOPNAME;
- $ENV{'SYNPLIFY'}=$synplify_path;
- $ENV{'LC_ALL'}=$synplify_locale_workaround;
- $ENV{'SYN_DISABLE_RAINBOW_DONGLE'}=1;
- $ENV{'LM_LICENSE_FILE'}=$lm_license_file_for_synplify;
- $ENV{'SYNPLIFY_BINARY'}=$config{synplify_binary};
-
- my $FAMILYNAME= $FPGA{$TOPNAME}{family};
- my $DEVICENAME= $FPGA{$TOPNAME}{device};
- my $SPEEDGRADE= $FPGA{$TOPNAME}{speed};
- my $PACKAGE= $FPGA{$TOPNAME}{package};
-
- unless(-d "../$project_path") {
- print "Project path does not exit.\n";
- exit 129;
- }
- chdir "../$project_path";
- my $cwd = getcwd();
- my $WORKDIR = "workdir";
- unless(-d $WORKDIR) {
- mkdir $WORKDIR or die "can't create workdir '$WORKDIR': $!";
- system("cd $WORKDIR; ../../base/linkdesignfiles.sh; cd ..");
- }
++$ENV{'PAR_DESIGN_NAME'}=$TOPNAME;
++$ENV{'SYNPLIFY'}=$synplify_path;
++$ENV{'LC_ALL'}=$synplify_locale_workaround;
++$ENV{'SYN_DISABLE_RAINBOW_DONGLE'}=1;
++$ENV{'LM_LICENSE_FILE'}=$lm_license_file_for_synplify;
++$ENV{'SYNPLIFY_BINARY'}=$config{synplify_binary};
++
++my $cwd = getcwd();
++my $WORKDIR = "workdir";
++unless(-d $WORKDIR) {
++ mkdir $WORKDIR or die "can't create workdir '$WORKDIR': $!";
++ system("cd $WORKDIR; ../../../trb3/base/linkdesignfiles.sh; cd ..");
++}
- compile();
-
-
- sub compile {
- system("ln -sfT $lattice_path $WORKDIR/lattice-diamond");
++system("ln -sfT $lattice_path $WORKDIR/lattice-diamond");
- $ENV{'PAR_DESIGN_NAME'}=$TOPNAME;
- $ENV{'SYNPLIFY'}=$synplify_path;
- $ENV{'LC_ALL'}=$synplify_locale_workaround;
- $ENV{'SYN_DISABLE_RAINBOW_DONGLE'}=1;
- $ENV{'LM_LICENSE_FILE'}=$lm_license_file_for_synplify;
- $ENV{'SYNPLIFY_BINARY'}=$config{synplify_binary};
- print GREEN, "Compiling $TOPNAME project in $cwd/$WORKDIR...\n\n", RESET;
++print GREEN, "Compiling $TOPNAME project in $cwd/$WORKDIR...\n\n", RESET;
- my $cwd = getcwd();
- my $WORKDIR = "workdir";
- unless(-d $WORKDIR) {
- mkdir $WORKDIR or die "can't create workdir '$WORKDIR': $!";
- system("cd $WORKDIR; ../../../trb3/base/linkdesignfiles.sh; cd ..");
- if ($con==1 || $all==1) {
- #create full lpf file
- my $pinout_file = $config{pinout_file} || $TOPNAME;
- print GREEN, "Generating constraints file...\n\n", RESET;
++if ($con==1 || $all==1) {
++ #create full lpf file
++ my $pinout_file = $config{pinout_file} || $TOPNAME;
++ print GREEN, "Generating constraints file...\n\n", RESET;
++ if ($TOPNAME =~ /trb3/) {
+ system("cp ../base/$pinout_file.lpf $WORKDIR/$TOPNAME.lpf");
-
- if ($include_TDC && $include_CTS==0) {
- system("cat tdc_release/trbnet_constraints.lpf >> $WORKDIR/$TOPNAME.lpf");
- system("cat tdc_release/tdc_constraints_64.lpf >> $WORKDIR/$TOPNAME.lpf");
- system("cat tdc_release/unimportant_lines_constraints.lpf >> $WORKDIR/$TOPNAME.lpf");
- system("cat unimportant_lines_constraints.lpf >> $WORKDIR/$TOPNAME.lpf");
-
- #change the Ring buffer name in the constraints file according to the config.vhd
- my $fh = new FileHandle("<config.vhd");
- my @a = <$fh>;
- $fh -> close;
- my $ringbuffersize;
- my $chNumber;
-
- foreach (@a) {
- $ringbuffersize = $1 if $_ =~ /constant\s+RING_BUFFER_SIZE\s*:.*:=\s*(\d+);/;
- $chNumber = $1 if $_ =~ /constant\s+NUM_TDC_CHANNELS\s*:.*:=\s*(\d+);/;
- }
-# print "$ringbuffersize\n";
-# print "$chNumber\n";
-
- my @newline;
- $fh = new FileHandle("<$WORKDIR/$TOPNAME".".lpf");
- @a = <$fh>;
- $fh -> close;
-
- foreach (@a) {
- if ($ringbuffersize == 0) {
- $_ =~ s/Buffer_128.The_Buffer/Buffer_32.The_Buffer/g;
- } elsif ($ringbuffersize == 1 || $ringbuffersize == 5) {
- $_ =~ s/Buffer_128.The_Buffer/Buffer_64.The_Buffer/g;
- } elsif ($ringbuffersize == 2) {
- $_ =~ s/Buffer_128.The_Buffer/Buffer_96.The_Buffer/g;
- } elsif ($ringbuffersize == 3 || $ringbuffersize == 7) {
- $_ =~ s/Buffer_128.The_Buffer/Buffer_128.The_Buffer/g;
- } else {
- print "unknown ringbuffer size... \n";
- exit 129;
- }
-
- my $ch = 1;
- $ch = $1 if $_ =~ /.*[]BLKNAME|PROHIBIT].*[GEN_Channels|GEN_hit_mux]\.(\d+).*/;
- if ($ch >= $chNumber) {
-# print "Channel $ch doesn't exist.\nold line $_";
- $_ =~ s/$_/#$_/;
-# print GREEN "new line $_\n\n\n", RESET;
- }
-
- push(@newline,$_);
- }
- $fh = new FileHandle(">$WORKDIR/$TOPNAME".".lpf");
- print $fh @newline;
- $fh -> close;
- }
-
- if ($include_GBE) {
-
- }
- if ($include_HUB) {
- system("cat trb3_periph_hub_constraints.lpf >> $WORKDIR/$TOPNAME.lpf");
- }
++ } else {
++ system("cp ../pinout/$pinout_file.lpf $WORKDIR/$TOPNAME.lpf");
}
- system("ln -sfT $lattice_path $WORKDIR/lattice-diamond");
-
- print GREEN, "Compiling $TOPNAME project in $cwd/$WORKDIR...\n\n", RESET;
-
- if ($con==1 || $all==1) {
- #create full lpf file
- my $pinout_file = $config{pinout_file} || $TOPNAME;
- print GREEN, "Generating constraints file...\n\n", RESET;
- if ($TOPNAME =~ /trb3/) {
- system("cp ../base/$pinout_file.lpf $WORKDIR/$TOPNAME.lpf");
- }
- else {
- system("cp ../pinout/$pinout_file.lpf $WORKDIR/$TOPNAME.lpf");
- }
-
- if ($include_TDC && $include_CTS==0) {
- system("cat tdc_release/trbnet_constraints.lpf >> $WORKDIR/$TOPNAME.lpf");
- system("cat tdc_release/tdc_constraints_64.lpf >> $WORKDIR/$TOPNAME.lpf");
- system("cat tdc_release/unimportant_lines_constraints.lpf >> $WORKDIR/$TOPNAME.lpf");
- system("cat unimportant_lines_constraints.lpf >> $WORKDIR/$TOPNAME.lpf");
-
- #copy delay line to project folder
- system("rm $WORKDIR/Adder_304.ngo");
- system("ln -s ../../../tdc/base/cores/ecp3/TDC/Adder_304.ngo $WORKDIR/Adder_304.ngo");
-
- #change the Ring buffer name in the constraints file according to the config.vhd
- my $fh = new FileHandle("<config.vhd");
- my @a = <$fh>;
- $fh -> close;
- my $ringbuffersize;
- my $chNumber;
-
- foreach (@a) {
- $ringbuffersize = $1 if $_ =~ /constant\s+RING_BUFFER_SIZE\s*:.*:=\s*(\d+);/;
- $chNumber = $1 if $_ =~ /constant\s+NUM_TDC_CHANNELS\s*:.*:=\s*(\d+);/;
- }
- # print "$ringbuffersize\n";
- # print "$chNumber\n";
-
- my @newline;
- $fh = new FileHandle("<$WORKDIR/$TOPNAME".".lpf");
- @a = <$fh>;
- $fh -> close;
-
- foreach (@a) {
- if ($ringbuffersize == 0) {
- $_ =~ s/Buffer_128.The_Buffer/Buffer_32.The_Buffer/g;
- } elsif ($ringbuffersize == 1 || $ringbuffersize == 5) {
- $_ =~ s/Buffer_128.The_Buffer/Buffer_64.The_Buffer/g;
- } elsif ($ringbuffersize == 2) {
- $_ =~ s/Buffer_128.The_Buffer/Buffer_96.The_Buffer/g;
- } elsif ($ringbuffersize == 3 || $ringbuffersize == 7) {
- $_ =~ s/Buffer_128.The_Buffer/Buffer_128.The_Buffer/g;
- } else {
- print "unknown ringbuffer size... \n";
- exit 129;
- }
- if ($include_CTS) {
- my $CbmNetPath = "../../cbmnet";
- my $config_vhd = 'config_mainz_a2.vhd';
- system("ln -f -s $config_vhd config.vhd") unless (-e "config.vhd");
- system("./compile_constraints.pl");
- system("cp ../base/mulipar_nodelist_example.txt $WORKDIR/nodelist.txt") unless (-e "$WORKDIR/nodelist.txt");
- symlink($CbmNetPath, '../cbmnet/cbmnet') unless (-e '../cbmnet/cbmnet');
- }
++ if ($include_TDC && $include_CTS==0) {
++ system("cat tdc_release/trbnet_constraints.lpf >> $WORKDIR/$TOPNAME.lpf");
++ system("cat tdc_release/tdc_constraints_64.lpf >> $WORKDIR/$TOPNAME.lpf");
++ system("cat tdc_release/unimportant_lines_constraints.lpf >> $WORKDIR/$TOPNAME.lpf");
++ system("cat unimportant_lines_constraints.lpf >> $WORKDIR/$TOPNAME.lpf");
- my $ch = 1;
- $ch = $1 if $_ =~ /.*[]BLKNAME|PROHIBIT].*[GEN_Channels|GEN_hit_mux]\.(\d+).*/;
- if ($ch >= $chNumber) {
- # print "Channel $ch doesn't exist.\nold line $_";
- $_ =~ s/$_/#$_/;
- # print GREEN "new line $_\n\n\n", RESET;
- }
- if ($include_TDC) {
+ #copy delay line to project folder
+ system("rm $WORKDIR/Adder_304.ngo");
+ system("ln -s ../../../tdc/base/cores/ecp3/TDC/Adder_304.ngo $WORKDIR/Adder_304.ngo");
+
- push(@newline,$_);
- }
- $fh = new FileHandle(">$WORKDIR/$TOPNAME".".lpf");
- print $fh @newline;
- $fh -> close;
- }
++ #edit the lpf file according to tdc settings
++ system("unlink compile_tdc.pl");
++ system("ln -s ../../tdc/scripts/compile_tdc.pl");
++ system ("./compile_tdc.pl", $WORKDIR, $TOPNAME, "config");
+ }
- if ($include_GBE) {
- if ($guidefile && -f "$TOPNAME.ncd") {
- system("cp $TOPNAME.ncd guidefile.ncd");
- $guidefile = " -g guidefile.ncd "
- } else {
- $guidefile = "";
++ if ($include_GBE) {
+
- }
- if ($include_HUB) {
- system("cat trb3_periph_hub_constraints.lpf >> $WORKDIR/$TOPNAME.lpf");
- }
}
-
- if ($include_CTS) {
- my $CbmNetPath = "../../cbmnet";
- my $config_vhd = 'config_mainz_a2.vhd';
- system("ln -f -s $config_vhd config.vhd") unless (-e "config.vhd");
- system("./compile_constraints.pl");
- system("cp ../../trb3/base/mulipar_nodelist_example.txt $WORKDIR/nodelist.txt") unless (-e "$WORKDIR/nodelist.txt");
- symlink($CbmNetPath, '../cbmnet/cbmnet') unless (-e '../cbmnet/cbmnet');
++ if ($include_HUB) {
++ system("cat trb3_periph_hub_constraints.lpf >> $WORKDIR/$TOPNAME.lpf");
+ }
++}
- if ($guidefile && -f "$TOPNAME.ncd") {
- system("cp $TOPNAME.ncd guidefile.ncd");
- $guidefile = " -g guidefile.ncd "
- } else {
- $guidefile = "";
- }
++if ($include_CTS) {
++ my $CbmNetPath = "../../cbmnet";
++ my $config_vhd = 'config_mainz_a2.vhd';
++ system("ln -f -s $config_vhd config.vhd") unless (-e "config.vhd");
++ system("./compile_constraints.pl");
++ system("cp ../../trb3/base/mulipar_nodelist_example.txt $WORKDIR/nodelist.txt") unless (-e "$WORKDIR/nodelist.txt");
++ symlink($CbmNetPath, '../cbmnet/cbmnet') unless (-e '../cbmnet/cbmnet');
++}
++
++if ($guidefile && -f "$TOPNAME.ncd") {
++ system("cp $TOPNAME.ncd guidefile.ncd");
++ $guidefile = " -g guidefile.ncd "
++} else {
++ $guidefile = "";
++}
- #generate timestamp
- my $t=time;
- my $fh = new FileHandle(">$WORKDIR/version.vhd");
- die "could not open file" if (! defined $fh);
- print $fh <<EOF;
+
- #generate timestamp
- my $t=time;
- my $fh = new FileHandle(">$WORKDIR/version.vhd");
- die "could not open file" if (! defined $fh);
- print $fh <<EOF;
++#generate timestamp
++my $t=time;
++my $fh = new FileHandle(">$WORKDIR/version.vhd");
++die "could not open file" if (! defined $fh);
++print $fh <<EOF;
--## attention, automatically generated. Don't change by hand.
library ieee;
end package version;
EOF
-- $fh->close;
--
-- system("env| grep LM_");
-- my $r = "";
-- my $c = "";
-- my @a = ();
-- my $tpmap = $TOPNAME . "_map" ;
--
-- chdir $WORKDIR;
-- if ($syn==1 || $all==1) {
- if ($include_TDC) { ## edit prj file for different designs
- my %configSettings = ();
- open(CONFIG, '../config.vhd');
- my $config = "#!!! This file was compiled using compile_contraints.pl.\n#!!! DO NOT EDIT AS ALL CHANGES WILL BE OVERRIDEN\n\n";
- print "The following module configuration was derived from config.vhd:\n";
- print GREEN, "Starting synthesis process...\n\n", RESET;
- $c="$synplify_path/bin/synplify_premier_dp -batch ../$TOPNAME.prj";
- $r=execute($c, "do_not_exit" );
--
- while(my $line = <CONFIG>) {
- if ($line =~ /(TDC_DATA_FORMAT).*:=\s*(\d+).*;/i) {
- my $mod = uc $1;
- my $type = $2;
- $configSettings{$mod} = $type;
- my $conf = "set $mod $type\n";
- print ' ' . $conf;
- $config .= $conf;
- }
- $fh = new FileHandle("<$TOPNAME".".srr");
- @a = <$fh>;
- $fh -> close;
-
- foreach (@a) {
- if (/\@E:/) {
- print "\n";
- $c = "cat $TOPNAME.srr | egrep --color \"\@E:\"";
- system($c);
- print RED, "ERROR in the log file $TOPNAME.srr Exiting...\n\n", RESET;
- exit 129;
-- }
- close(CONFIG);
- open TCLCONF, '>', $TOPNAME . '_prjconfig.tcl';
- print TCLCONF $config;
- close TCLCONF;
++$fh->close;
++
++system("env| grep LM_");
++my $r = "";
++my $c = "";
++my @a = ();
++my $tpmap = $TOPNAME . "_map" ;
++
++chdir $WORKDIR;
++if ($syn==1 || $all==1) {
++ system ("./../compile_tdc.pl", $WORKDIR, $TOPNAME, "prj") if ($include_TDC); ## edit prj file for different designs
++
++ print GREEN, "Starting synthesis process...\n\n", RESET;
++ $c="$synplify_path/bin/synplify_premier_dp -batch ../$TOPNAME.prj";
++ $r=execute($c, "do_not_exit" );
++
++ $fh = new FileHandle("<$TOPNAME".".srr");
++ @a = <$fh>;
++ $fh -> close;
++
++ foreach (@a) {
++ if (/\@E:/) {
++ print "\n";
++ $c = "cat $TOPNAME.srr | egrep --color \"\@E:\"";
++ system($c);
++ print RED, "ERROR in the log file $TOPNAME.srr Exiting...\n\n", RESET;
++ exit 129;
}
+ }
++}
- print GREEN, "Starting synthesis process...\n\n", RESET;
- $c="$synplify_path/bin/synplify_premier_dp -batch ../$TOPNAME.prj";
- $r=execute($c, "do_not_exit" );
- $ENV{'LM_LICENSE_FILE'}=$lm_license_file_for_par;
++$ENV{'LM_LICENSE_FILE'}=$lm_license_file_for_par;
- $fh = new FileHandle("<$TOPNAME".".srr");
- @a = <$fh>;
- $fh -> close;
- if ($map==1 || $all==1) {
- print GREEN, "Starting mapping process...\n\n", RESET;
++if ($map==1 || $all==1) {
++ print GREEN, "Starting mapping process...\n\n", RESET;
- foreach (@a) {
- if (/\@E:/) {
- print "\n";
- $c = "cat $TOPNAME.srr | egrep --color \"\@E:\"";
- system($c);
- print RED, "ERROR in the log file $TOPNAME.srr Exiting...\n\n", RESET;
- exit 129;
- }
- }
- }
- $c=qq|edif2ngd -path "../" -path "." -l $FAMILYNAME -d $DEVICENAME "$TOPNAME.edf" "$TOPNAME.ngo" |;
- execute($c);
++ $c=qq|edif2ngd -path "../" -path "." -l $FAMILYNAME -d $DEVICENAME "$TOPNAME.edf" "$TOPNAME.ngo" |;
++ execute($c);
- $ENV{'LM_LICENSE_FILE'}=$lm_license_file_for_par;
- $c=qq|edfupdate -t "$TOPNAME.tcy" -w "$TOPNAME.ngo" -m "$TOPNAME.ngo" "$TOPNAME.ngx"|;
- execute($c);
++ $c=qq|edfupdate -t "$TOPNAME.tcy" -w "$TOPNAME.ngo" -m "$TOPNAME.ngo" "$TOPNAME.ngx"|;
++ execute($c);
- if ($map==1 || $all==1) {
- print GREEN, "Starting mapping process...\n\n", RESET;
- $c=qq|ngdbuild -a $FAMILYNAME -d $DEVICENAME -p "$lattice_path/ispfpga/ep5c00/data" -dt "$TOPNAME.ngo" "$TOPNAME.ngd"|;
- execute($c);
++ $c=qq|ngdbuild -a $FAMILYNAME -d $DEVICENAME -p "$lattice_path/ispfpga/ep5c00/data" -dt "$TOPNAME.ngo" "$TOPNAME.ngd"|;
++ execute($c);
- $c=qq|edif2ngd -path "../" -path "." -l $FAMILYNAME -d $DEVICENAME "$TOPNAME.edf" "$TOPNAME.ngo" |;
- $c=qq|map -retime -split_node -a $FAMILYNAME -p $DEVICENAME -t $PACKAGE -s $SPEEDGRADE "$TOPNAME.ngd" -pr "$TOPNAME.prf" -o "$tpmap.ncd" -mp "$TOPNAME.mrp" "$TOPNAME.lpf"|;
-- execute($c);
++ $c=qq|map -retime -split_node -a $FAMILYNAME -p $DEVICENAME -t $PACKAGE -s $SPEEDGRADE "$TOPNAME.ngd" -pr "$TOPNAME.prf" -o "$tpmap.ncd" -mp "$TOPNAME.mrp" "$TOPNAME.lpf"|;
++ execute($c);
+
- $c=qq|edfupdate -t "$TOPNAME.tcy" -w "$TOPNAME.ngo" -m "$TOPNAME.ngo" "$TOPNAME.ngx"|;
- execute($c);
++ $c=qq|htmlrpt -mrp $TOPNAME.mrp $TOPNAME|;
++ execute($c);
+
- $c=qq|ngdbuild -a $FAMILYNAME -d $DEVICENAME -p "$lattice_path/ispfpga/ep5c00/data" -dt "$TOPNAME.ngo" "$TOPNAME.ngd"|;
- execute($c);
++ $fh = new FileHandle("<$TOPNAME"."_mrp.html");
++ @a = <$fh>;
++ $fh -> close;
++ my $i=1;
++ my $print=0;
++ foreach (@a) {
++ if (/WARNING/|$print) {
++ if ((grep /WARNING - map: There are semantic errors in the preference file/, $_) & ($i == 1)) {
++ last;
++ } elsif (grep /WARNING - map: There are semantic errors in the preference file/, $_) {
++ print RED, "There are errors in the constraints file. Better have a look...\n\n", RESET;
++ sleep(5); # ERROR -> sleep is effective before the print
++ last;
++ } elsif ($i == 1) {
++ print RED,"\n\n", RESET;
++ print RED,"#################################################\n", RESET;
++ print RED,"CONSTRAINTS ERRORS\n", RESET;
++ print RED,"#################################################\n\n", RESET;
++ }
++ $print=1;
++ if (grep /WARNING.*UGROUP/, $_) {
++ print RED, $_, RESET;
++ } elsif (grep /FC|hitBuf|ff_en/, $_) {
++ print YELLOW, $_, RESET;
++ } else {
++ print $_;
++ }
++ $i++;
++ }
++ }
++}
+
- $c=qq|map -retime -split_node -a $FAMILYNAME -p $DEVICENAME -t $PACKAGE -s $SPEEDGRADE "$TOPNAME.ngd" -pr "$TOPNAME.prf" -o "$tpmap.ncd" -mp "$TOPNAME.mrp" "$TOPNAME.lpf"|;
- execute($c);
++if ($par==1 || $all==1) {
++ print GREEN, "Starting placement process...\n\n", RESET;
-- $c=qq|htmlrpt -mrp $TOPNAME.mrp $TOPNAME|;
++ system("rm $TOPNAME.ncd");
++ if ($isMultiPar) {
++ $c=qq|LC_ALL=en_US.UTF-8; par -m $nodelist_file -n $nrNodes -f $par_options $guidefile $tpmap.ncd $TOPNAME.dir $TOPNAME.prf;|;
++ # $c=qq|LC_ALL=en_US.UTF-8; par -m $nodelist_file -n $nrNodes -w -i 15 -l 5 -y -s 8 -t 1 -c 1 -e 2 -exp parCDP=1:parCDR=1:parPlcInLimit=0:parPlcInNeighborSize=1:parPathBased=ON:parHold=1:parHoldLimit=10000:paruseNBR=1 $tpmap.ncd $TOPNAME.dir $TOPNAME.prf;|;
execute($c);
-- $fh = new FileHandle("<$TOPNAME"."_mrp.html");
-- @a = <$fh>;
++ # find and copy the .ncd file which has met the timing constraints
++ $fh = new FileHandle("<$TOPNAME".".par");
++ my @a = <$fh>;
$fh -> close;
++ my $isSuccess = 0;
my $i=1;
-- my $print=0;
foreach (@a) {
-- if (/WARNING/|$print) {
-- if ((grep /WARNING - map: There are semantic errors in the preference file/, $_) & ($i == 1)) {
- last;
- } elsif (grep /WARNING - map: There are semantic errors in the preference file/, $_) {
- print RED, "There are errors in the constraints file. Better have a look...\n\n", RESET;
- sleep(5); # ERROR -> sleep is effective before the print
++ my @line = split(/\s+/, $_);
++
++ if (@line && ($line[2] =~ m/^[0-9]+$/) && ($line[4] =~ m/^[0-9]+$/)) {
++ if (($line[2] == 0) && ($line[4] == 0)) {
++ print GREEN, "Copying $line[0].ncd file to $WORKDIR\n", RESET;
++ my $c="cp $TOPNAME.dir/$line[0].ncd $TOPNAME.ncd";
++ system($c);
++ print "\n\n";
++ $isSuccess = 1;
last;
- } elsif (grep /WARNING - map: There are semantic errors in the preference file/, $_) {
- print RED, "There are errors in the constraints file. Better have a look...\n\n", RESET;
- sleep(5); # ERROR -> sleep is effective before the print
- last;
-- } elsif ($i == 1) {
-- print RED,"\n\n", RESET;
-- print RED,"#################################################\n", RESET;
-- print RED,"CONSTRAINTS ERRORS\n", RESET;
-- print RED,"#################################################\n\n", RESET;
- }
- $print=1;
- if (grep /WARNING.*UGROUP/, $_) {
- print RED, $_, RESET;
- } elsif (grep /FC|hitBuf|ff_en/, $_) {
- print YELLOW, $_, RESET;
- } else {
- print $_;
}
- $print=1;
- if (grep /WARNING.*UGROUP/, $_) {
- print RED, $_, RESET;
- } elsif (grep /FC|hitBuf|ff_en/, $_) {
- print YELLOW, $_, RESET;
- } else {
- print $_;
- }
-- $i++;
}
}
-- }
-
- if ($par==1 || $all==1) {
- print GREEN, "Starting placement process...\n\n", RESET;
-
- system("rm $TOPNAME.ncd");
- if ($isMultiPar) {
- $c=qq|LC_ALL=en_US.UTF-8; par -m $nodelist_file -n $nrNodes -f $par_options $guidefile $tpmap.ncd $TOPNAME.dir $TOPNAME.prf;|;
- # $c=qq|LC_ALL=en_US.UTF-8; par -m $nodelist_file -n $nrNodes -w -i 15 -l 5 -y -s 8 -t 1 -c 1 -e 2 -exp parCDP=1:parCDR=1:parPlcInLimit=0:parPlcInNeighborSize=1:parPathBased=ON:parHold=1:parHoldLimit=10000:paruseNBR=1 $tpmap.ncd $TOPNAME.dir $TOPNAME.prf;|;
- execute($c);
-
- # find and copy the .ncd file which has met the timing constraints
- $fh = new FileHandle("<$TOPNAME".".par");
- my @a = <$fh>;
- $fh -> close;
- my $isSuccess = 0;
- my $i=1;
- foreach (@a) {
- my @line = split(/\s+/, $_);
-
- if (@line && ($line[2] =~ m/^[0-9]+$/) && ($line[4] =~ m/^[0-9]+$/)) {
- if (($line[2] == 0) && ($line[4] == 0)) {
- print GREEN, "Copying $line[0].ncd file to $WORKDIR\n", RESET;
- my $c="cp $TOPNAME.dir/$line[0].ncd $TOPNAME.ncd";
- system($c);
- print "\n\n";
- $isSuccess = 1;
- last;
- }
- }
- }
- if ($par==1 || $all==1) {
- print GREEN, "Starting placement process...\n\n", RESET;
-
- system("rm $TOPNAME.ncd");
- if ($isMultiPar) {
- $c=qq|LC_ALL=en_US.UTF-8; par -m $nodelist_file -n $nrNodes -f $par_options $guidefile $tpmap.ncd $TOPNAME.dir $TOPNAME.prf;|;
- # $c=qq|LC_ALL=en_US.UTF-8; par -m $nodelist_file -n $nrNodes -w -i 15 -l 5 -y -s 8 -t 1 -c 1 -e 2 -exp parCDP=1:parCDR=1:parPlcInLimit=0:parPlcInNeighborSize=1:parPathBased=ON:parHold=1:parHoldLimit=10000:paruseNBR=1 $tpmap.ncd $TOPNAME.dir $TOPNAME.prf;|;
- execute($c);
-
- # find and copy the .ncd file which has met the timing constraints
- $fh = new FileHandle("<$TOPNAME".".par");
- my @a = <$fh>;
- $fh -> close;
- my $isSuccess = 0;
- my $i=1;
- foreach (@a) {
- my @line = split(/\s+/, $_);
-
- if (@line && ($line[2] =~ m/^[0-9]+$/) && ($line[4] =~ m/^[0-9]+$/)) {
- if (($line[2] == 0) && ($line[4] == 0)) {
- print GREEN, "Copying $line[0].ncd file to $WORKDIR\n", RESET;
- my $c="cp $TOPNAME.dir/$line[0].ncd $TOPNAME.ncd";
- system($c);
- print "\n\n";
- $isSuccess = 1;
- last;
- }
- }
- }
-
-- if (!$isSuccess) {
-- print RED, "\n\n", RESET;
-- print RED, "#################################################\n", RESET;
-- print RED, "# !!!PAR not successfull!!! #\n", RESET;
-- print RED, "#################################################\n\n", RESET;
-- exit 129;
-- }
-- } else {
-- $c=qq|par -f $par_options $guidefile $tpmap.ncd $TOPNAME.ncd $TOPNAME.prf|;
-- # $c=qq|par -w -i 15 -l 5 -y -s 8 -t 1 -c 1 -e 2 -exp parCDP=1:parCDR=1:parPlcInLimit=0:parPlcInNeighborSize=1:parPathBased=ON:parHold=1:parHoldLimit=10000:paruseNBR=1 $tpmap.ncd $TOPNAME.ncd $TOPNAME.prf|;
-- execute($c);
-- my $c="cp $TOPNAME.dir/5_1.ncd $TOPNAME.ncd";
-- system($c);
++ if (!$isSuccess) {
++ print RED, "\n\n", RESET;
++ print RED, "#################################################\n", RESET;
++ print RED, "# !!!PAR not successfull!!! #\n", RESET;
++ print RED, "#################################################\n\n", RESET;
++ exit 129;
}
-- my $c="cat $TOPNAME.par";
++ } else {
++ $c=qq|par -f $par_options $guidefile $tpmap.ncd $TOPNAME.ncd $TOPNAME.prf|;
++ # $c=qq|par -w -i 15 -l 5 -y -s 8 -t 1 -c 1 -e 2 -exp parCDP=1:parCDR=1:parPlcInLimit=0:parPlcInNeighborSize=1:parPathBased=ON:parHold=1:parHoldLimit=10000:paruseNBR=1 $tpmap.ncd $TOPNAME.ncd $TOPNAME.prf|;
++ execute($c);
++ my $c="cp $TOPNAME.dir/5_1.ncd $TOPNAME.ncd";
system($c);
}
++ my $c="cat $TOPNAME.par";
++ system($c);
++}
-- if ($timing==1 || $all==1) {
-- print GREEN, "Generating timing report...\n\n", RESET;
++if ($timing==1 || $all==1) {
++ print GREEN, "Generating timing report...\n\n", RESET;
-- # IOR IO Timing Report
-- $c=qq|iotiming -s "$TOPNAME.ncd" "$TOPNAME.prf"|;
-- execute($c);
++ # TWR Timing Report
++ $c=qq|trce -c -v $twr_number_of_errors -o "$TOPNAME.twr.setup" "$TOPNAME.ncd" "$TOPNAME.prf" $parallel|;
++ execute($c);
-- # TWR Timing Report
-- $c=qq|trce -c -v $twr_number_of_errors -o "$TOPNAME.twr.setup" "$TOPNAME.ncd" "$TOPNAME.prf"|;
-- execute($c);
++ $c=qq|trce -hld -c -v $twr_number_of_errors -o "$TOPNAME.twr.hold" "$TOPNAME.ncd" "$TOPNAME.prf" $parallel|;
++ execute($c);
-- $c=qq|trce -hld -c -v $twr_number_of_errors -o "$TOPNAME.twr.hold" "$TOPNAME.ncd" "$TOPNAME.prf"|;
-- execute($c);
++ # IOR IO Timing Report
++ $c=qq|iotiming -s "$TOPNAME.ncd" "$TOPNAME.prf"|;
++ execute($c);
-- my $c="cat $TOPNAME.par";
-- system($c);
-- }
++ my $c="cat $TOPNAME.par";
++ system($c);
++}
-- if ($bitgen==1 || $all==1) {
-- print GREEN, "Generating bit file...\n\n", RESET;
++if ($bitgen==1 || $all==1) {
++ print GREEN, "Generating bit file...\n\n", RESET;
-- $c=qq|ltxt2ptxt $TOPNAME.ncd|;
-- execute($c);
++ $c=qq|ltxt2ptxt $TOPNAME.ncd|;
++ execute($c) unless $config{no_ltxt2ptxt} ;
++ if ($config{make_jed}) {
++ $c=qq|bitgen -w -g CfgMode:Disable -g RamCfg:Reset -g ES:No -jedec $TOPNAME.ncd $TOPNAME.jed $TOPNAME.prf|;
++ } else {
$c=qq|bitgen -w -g CfgMode:Disable -g RamCfg:Reset -g ES:No $TOPNAME.ncd $TOPNAME.bit $TOPNAME.prf|;
-- execute($c);
-- }
--
-- $c=qq|htmlrpt -mrp $TOPNAME.mrp -mtwr $TOPNAME.twr.hold -ptwr $TOPNAME.twr.setup $TOPNAME|;
++ }
execute($c);
++}
-- if ($config{firefox_open}) {
-- $c=qq|firefox $TOPNAME.html|;
-- execute($c);
-- }
++$c=qq|htmlrpt -mrp $TOPNAME.mrp -mtwr $TOPNAME.twr.hold -ptwr $TOPNAME.twr.setup $TOPNAME|;
++execute($c);
-- chdir "..";
++if ($config{firefox_open}) {
++ $c=qq|firefox $TOPNAME.html|;
++ execute($c);
}
++chdir "..";
++
++
sub execute {
my ($c, $op) = @_;
#print "option: $op \n";
jspc29 / trb3.git / commitdiff