--design options: backplane or front SFP, with or without GBE
constant USE_BACKPLANE : integer := c_NO; --c_YES doesn't work
constant USE_ADDON : integer := c_NO;
+ constant USE_RJADAPT : integer := c_NO; --!!! Change pin-out file!
constant INCLUDE_GBE : integer := c_YES; --c_NO doesn't work
--Runs with 120 MHz instead of 100 MHz
constant INCLUDE_TDC : integer := c_YES;
constant INCLUDE_TRIGGER_LOGIC : integer := c_YES;
constant INCLUDE_STATISTICS : integer := c_YES;
- constant TRIG_GEN_INPUT_NUM : integer := 40;
+ constant TRIG_GEN_INPUT_NUM : integer := 32;
constant TRIG_GEN_OUTPUT_NUM : integer := 2;
- constant MONITOR_INPUT_NUM : integer := 40;
+ constant MONITOR_INPUT_NUM : integer := 32;
constant FPGA_TYPE : integer := 3; --3: ECP3, 5: ECP5
- constant PINOUT : integer := 2;
- -- 0: KEL on board
- -- 1: Canadian
+
+
constant NUM_TDC_MODULES : integer range 1 to 4 := 1; -- number of tdc modules to implement
constant NUM_TDC_CHANNELS : integer range 1 to 65 := 33; -- number of tdc channels per module
constant NUM_TDC_CHANNELS_POWER2 : integer range 0 to 6 := 4; --the nearest power of two, for convenience reasons
constant TRIGGER_RAND_PULSER : integer := 1;
constant TRIGGER_ADDON_COUNT : integer := 4;
constant PERIPH_TRIGGER_COUNT : integer := 0;
- constant ADDON_LINE_COUNT : integer := 44;
+ constant ADDON_LINE_COUNT : integer := 36 - USE_RJADAPT*12; --36 with Padiwa, 22 with RJ-adapter
constant CTS_OUTPUT_MULTIPLEXERS : integer := 1;
--TODO:
-- constant INCLUDE_MBS_MASTER : integer range c_NO to c_YES := c_NO;
t := (others => '0');
t(63 downto 56) := std_logic_vector(to_unsigned(1,8)); --table version 1
t(3 downto 0) := std_logic_vector(TO_UNSIGNED(ETM_CHOICE_type'pos(ETM_CHOICE), 4));
+ t(7 downto 7) := std_logic_vector(to_unsigned(USE_RJADAPT,1));
t(11 downto 8) := std_logic_vector(to_unsigned(DOUBLE_EDGE_TYPE,4));
t(14 downto 12) := std_logic_vector(to_unsigned(RING_BUFFER_SIZE,3));
t(15 downto 15) := std_logic_vector(to_unsigned(INCLUDE_TDC,1)); --TDC
--- /dev/null
+library ieee;
+USE IEEE.std_logic_1164.ALL;
+use ieee.numeric_std.all;
+use work.trb_net_std.all;
+use work.trb_net16_hub_func.all;
+
+package config is
+
+
+------------------------------------------------------------------------------
+--Begin of design configuration
+------------------------------------------------------------------------------
+
+--design options: backplane or front SFP, with or without GBE
+ constant USE_BACKPLANE : integer := c_NO; --c_YES doesn't work
+ constant USE_ADDON : integer := c_YES;
+ constant USE_RJADAPT : integer := c_NO; --!!! Change pin-out file!
+ constant INCLUDE_GBE : integer := c_YES; --c_NO doesn't work
+
+--Runs with 120 MHz instead of 100 MHz
+ constant USE_120_MHZ : integer := c_NO;
+ constant USE_200MHZOSCILLATOR : integer := c_YES;
+ constant USE_EXTERNAL_CLOCK : integer := c_YES; --'no' not implemented.
+ constant CLOCK_FAST_SELECT : integer := c_YES; --fast clock select (135us) or slow (280ms)?
+
+--Use sync mode, RX clock for all parts of the FPGA
+ constant USE_RXCLOCK : integer := c_NO;
+
+--Address settings
+ constant INIT_ADDRESS : std_logic_vector := x"F3C0";
+ constant BROADCAST_SPECIAL_ADDR : std_logic_vector := x"62"; --62 for SFP, 63 for backplane
+
+
+ constant INCLUDE_UART : integer := c_YES;
+ constant INCLUDE_SPI : integer := c_YES;
+ constant INCLUDE_LCD : integer := c_NO;
+ constant INCLUDE_DEBUG_INTERFACE: integer := c_YES;
+
+ --input monitor and trigger generation logic
+ constant INCLUDE_TDC : integer := c_NO;
+ constant INCLUDE_TRIGGER_LOGIC : integer := c_YES;
+ constant INCLUDE_STATISTICS : integer := c_YES;
+ constant TRIG_GEN_INPUT_NUM : integer := 32;
+ constant TRIG_GEN_OUTPUT_NUM : integer := 2;
+ constant MONITOR_INPUT_NUM : integer := 32;
+
+
+ constant FPGA_TYPE : integer := 3; --3: ECP3, 5: ECP5
+
+
+ constant NUM_TDC_MODULES : integer range 1 to 4 := 1; -- number of tdc modules to implement
+ constant NUM_TDC_CHANNELS : integer range 1 to 65 := 33; -- number of tdc channels per module
+ constant NUM_TDC_CHANNELS_POWER2 : integer range 0 to 6 := 4; --the nearest power of two, for convenience reasons
+ constant DOUBLE_EDGE_TYPE : integer range 0 to 3 := 3; --double edge type: 0, 1, 2, 3
+ -- 0: single edge only,
+ -- 1: same channel,
+ -- 2: alternating channels,
+ -- 3: same channel with stretcher
+ constant RING_BUFFER_SIZE : integer range 0 to 7 := 7; --ring buffer size: 0, 1, 2, 3, 7 --> change names in constraints file
+ --ring buffer size: 32,64,96,128,dyn
+ constant TDC_DATA_FORMAT : integer := 0;
+
+ constant EVENT_BUFFER_SIZE : integer range 9 to 13 := 13; -- size of the event buffer, 2**N
+ constant EVENT_MAX_SIZE : integer := 1023; --maximum event size. Should not exceed
+
+ constant GEN_BUSY_OUTPUT : integer := c_NO;
+
+ constant TRIGGER_COIN_COUNT : integer := 1;
+ constant TRIGGER_PULSER_COUNT : integer := 3;
+ constant TRIGGER_RAND_PULSER : integer := 1;
+ constant TRIGGER_ADDON_COUNT : integer := 4;
+ constant PERIPH_TRIGGER_COUNT : integer := 0;
+ constant ADDON_LINE_COUNT : integer := 36 - USE_RJADAPT*12; --36 with Padiwa, 22 with RJ-adapter
+ constant CTS_OUTPUT_MULTIPLEXERS : integer := 1;
+--TODO:
+-- constant INCLUDE_MBS_MASTER : integer range c_NO to c_YES := c_NO;
+--Which external trigger module (ETM) to use?
+ constant INCLUDE_ETM : integer range c_NO to c_YES := c_YES;
+ type ETM_CHOICE_type is (ETM_CHOICE_MBS_VULOM, ETM_CHOICE_MAINZ_A2, ETM_CHOICE_CBMNET, ETM_CHOICE_M26);
+ constant ETM_CHOICE : ETM_CHOICE_type := ETM_CHOICE_MBS_VULOM;
+ constant ETM_ID : std_logic_vector(7 downto 0);
+
+ constant INCLUDE_TIMESTAMP_GENERATOR : integer := c_NO;
+
+
+
+------------------------------------------------------------------------------
+--End of design configuration
+------------------------------------------------------------------------------
+
+ type data_t is array (0 to 1023) of std_logic_vector(7 downto 0);
+ constant LCD_DATA : data_t := (
+ x"36",x"48",x"3A",x"55",x"29",x"2A",x"00",x"00", --config don't touch
+ x"00",x"EF",x"2B",x"00",x"00",x"01",x"3F",x"2C", --config don't touch
+ x"00",x"00",x"00",x"00",x"00",x"00",x"00",x"00", --config don't touch
+ x"00",x"00",x"00",x"00",x"00",x"00",x"00",x"00", --config don't touch
+
+ x"48", x"75", x"62", x"41", x"64", x"64", x"4f", x"6e", x"0a",
+ x"0a",
+ x"41", x"64", x"64", x"72", x"65", x"73", x"73", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"80", x"0a",
+ x"43", x"6f", x"6d", x"70", x"69", x"6c", x"65", x"54", x"69", x"6d", x"65", x"20", x"20", x"84", x"83", x"0a",
+ x"54", x"69", x"6d", x"65", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"82", x"81", x"0a",
+ others => x"00");
+
+
+ type hub_mii_t is array(0 to 3) of integer;
+ type hub_ct is array(0 to 16) of integer;
+ type hub_cfg_t is array(0 to 3) of hub_ct;
+ type hw_info_t is array(0 to 3) of std_logic_vector(31 downto 0);
+ type intlist_t is array(0 to 7) of integer;
+-- 0 opt. link opt. link
+-- 0-7 SFP 1-8
+-- 1(8) CTS read-out internal 0 1 - X X O --downlink only
+-- 2(9) CTS TRG Sctrl GbE 2 3 4 X X X --uplink only
+
+ --Order:
+ -- no backplane, no AddOn, 1x SFP, 1x GBE
+-- -- -- -- no backplane, 4x AddOn, 1x SFP, 1x GBE
+ -- no backplane, 8x AddOn, 0x SFP, 1x GBE
+-- -- -- -- backplane, 9x backplane, 1x GBE
+ constant SFP_NUM_ARR : hub_mii_t := (1,0,8,0);
+ constant INTERFACE_NUM_ARR : hub_mii_t := (1,5,8,10);
+-- 0 1 2 3 4 5 6 7 8 9 a b c d e f
+ constant IS_UPLINK_ARR : hub_cfg_t := ((0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0),
+ (0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0),
+-- (0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0));
+ constant IS_DOWNLINK_ARR : hub_cfg_t := ((1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0),
+ (1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0),
+-- (1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0),
+ (1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0));
+ constant IS_UPLINK_ONLY_ARR : hub_cfg_t := ((0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0),
+ (0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0),
+-- (0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0));
+
+ constant INTERFACE_NUM : integer;
+ constant IS_UPLINK : hub_ct;
+ constant IS_DOWNLINK : hub_ct;
+ constant IS_UPLINK_ONLY : hub_ct;
+
+------------------------------------------------------------------------------
+--Select settings by configuration
+------------------------------------------------------------------------------
+ constant cts_rdo_additional_ports : integer := INCLUDE_TDC + INCLUDE_TIMESTAMP_GENERATOR + INCLUDE_ETM; --for TDC
+
+ constant HW_INFO_BASE : unsigned(31 downto 0) := x"9500A000";
+
+ constant CLOCK_FREQUENCY_ARR : intlist_t := (100,120, others => 0);
+ constant MEDIA_FREQUENCY_ARR : intlist_t := (200,240, others => 0);
+
+ --declare constants, filled in body
+ constant HARDWARE_INFO : std_logic_vector(31 downto 0);
+ constant CLOCK_FREQUENCY : integer;
+ constant MEDIA_FREQUENCY : integer;
+ constant INCLUDED_FEATURES : std_logic_vector(63 downto 0);
+
+
+end;
+
+package body config is
+--compute correct configuration mode
+
+ constant HARDWARE_INFO : std_logic_vector(31 downto 0) := std_logic_vector(
+ HW_INFO_BASE );
+ constant CLOCK_FREQUENCY : integer := CLOCK_FREQUENCY_ARR(USE_120_MHZ);
+ constant MEDIA_FREQUENCY : integer := MEDIA_FREQUENCY_ARR(USE_120_MHZ);
+
+ constant CFG_MODE : integer := USE_ADDON*2;--*2 + USE_BACKPLANE;
+
+ constant INTERFACE_NUM : integer := INTERFACE_NUM_ARR(CFG_MODE);
+ constant IS_UPLINK : hub_ct := IS_UPLINK_ARR(CFG_MODE);
+ constant IS_DOWNLINK : hub_ct := IS_DOWNLINK_ARR(CFG_MODE);
+ constant IS_UPLINK_ONLY : hub_ct := IS_UPLINK_ONLY_ARR(CFG_MODE);
+
+ function etm_id_func return std_logic_vector is
+ variable res : unsigned(7 downto 0);
+ begin
+ res := x"00";
+ if INCLUDE_ETM=c_YES then
+ res := x"60";
+ res := res + TO_UNSIGNED(ETM_CHOICE_type'pos(ETM_CHOICE), 4);
+ end if;
+ return std_logic_vector(res);
+ end function;
+
+ constant ETM_ID : std_logic_vector(7 downto 0) := etm_id_func;
+
+
+function generateIncludedFeatures return std_logic_vector is
+ variable t : std_logic_vector(63 downto 0);
+ begin
+ t := (others => '0');
+ t(63 downto 56) := std_logic_vector(to_unsigned(1,8)); --table version 1
+ t(3 downto 0) := std_logic_vector(TO_UNSIGNED(ETM_CHOICE_type'pos(ETM_CHOICE), 4));
+ t(7 downto 7) := std_logic_vector(to_unsigned(USE_RJADAPT,1));
+ t(11 downto 8) := std_logic_vector(to_unsigned(DOUBLE_EDGE_TYPE,4));
+ t(14 downto 12) := std_logic_vector(to_unsigned(RING_BUFFER_SIZE,3));
+ t(15 downto 15) := std_logic_vector(to_unsigned(INCLUDE_TDC,1)); --TDC
+ t(16 downto 16) := std_logic_vector(to_unsigned(INCLUDE_GBE,1)); --data via GbE
+ t(17 downto 17) := std_logic_vector(to_unsigned(INCLUDE_GBE,1)); --sctrl via GbE
+ t(23 downto 23) := std_logic_vector(to_unsigned(INCLUDE_GBE,1));
+ t(26 downto 24) := std_logic_vector(to_unsigned(SFP_NUM_ARR(CFG_MODE),3)); --num SFPs with TrbNet
+ t(28 downto 28) := std_logic_vector(to_unsigned(USE_BACKPLANE,1));
+ t(40 downto 40) := std_logic_vector(to_unsigned(INCLUDE_LCD,1));
+ t(42 downto 42) := std_logic_vector(to_unsigned(INCLUDE_SPI,1));
+ t(43 downto 43) := std_logic_vector(to_unsigned(INCLUDE_UART,1));
+ t(44 downto 44) := std_logic_vector(to_unsigned(INCLUDE_STATISTICS,1));
+ t(51 downto 48) := std_logic_vector(to_unsigned(INCLUDE_TRIGGER_LOGIC,4));
+ t(52 downto 52) := std_logic_vector(to_unsigned(USE_120_MHZ,1));
+ t(53 downto 53) := std_logic_vector(to_unsigned(USE_RXCLOCK,1));
+ t(54 downto 54) := std_logic_vector(to_unsigned(USE_EXTERNAL_CLOCK,1));
+ t(55 downto 55) := std_logic_vector(to_unsigned(USE_200MHZOSCILLATOR,1));
+ return t;
+ end function;
+
+ constant INCLUDED_FEATURES : std_logic_vector(63 downto 0) := generateIncludedFeatures;
+
+end package body;
--- /dev/null
+library ieee;
+USE IEEE.std_logic_1164.ALL;
+use ieee.numeric_std.all;
+use work.trb_net_std.all;
+use work.trb_net16_hub_func.all;
+
+package config is
+
+
+------------------------------------------------------------------------------
+--Begin of design configuration
+------------------------------------------------------------------------------
+
+--design options: backplane or front SFP, with or without GBE
+ constant USE_BACKPLANE : integer := c_NO; --c_YES doesn't work
+ constant USE_ADDON : integer := c_YES;
+ constant USE_RJADAPT : integer := c_YES; --!!! Change pin-out file!
+ constant INCLUDE_GBE : integer := c_YES; --c_NO doesn't work
+
+--Runs with 120 MHz instead of 100 MHz
+ constant USE_120_MHZ : integer := c_NO;
+ constant USE_200MHZOSCILLATOR : integer := c_YES;
+ constant USE_EXTERNAL_CLOCK : integer := c_YES; --'no' not implemented.
+ constant CLOCK_FAST_SELECT : integer := c_YES; --fast clock select (135us) or slow (280ms)?
+
+--Use sync mode, RX clock for all parts of the FPGA
+ constant USE_RXCLOCK : integer := c_NO;
+
+--Address settings
+ constant INIT_ADDRESS : std_logic_vector := x"F3C0";
+ constant BROADCAST_SPECIAL_ADDR : std_logic_vector := x"62"; --62 for SFP, 63 for backplane
+
+
+ constant INCLUDE_UART : integer := c_YES;
+ constant INCLUDE_SPI : integer := c_YES;
+ constant INCLUDE_LCD : integer := c_NO;
+ constant INCLUDE_DEBUG_INTERFACE: integer := c_YES;
+
+ --input monitor and trigger generation logic
+ constant INCLUDE_TDC : integer := c_NO;
+ constant INCLUDE_TRIGGER_LOGIC : integer := c_YES;
+ constant INCLUDE_STATISTICS : integer := c_YES;
+ constant TRIG_GEN_INPUT_NUM : integer := 20;
+ constant TRIG_GEN_OUTPUT_NUM : integer := 2;
+ constant MONITOR_INPUT_NUM : integer := 20;
+
+
+ constant FPGA_TYPE : integer := 3; --3: ECP3, 5: ECP5
+
+
+ constant NUM_TDC_MODULES : integer range 1 to 4 := 1; -- number of tdc modules to implement
+ constant NUM_TDC_CHANNELS : integer range 1 to 65 := 33; -- number of tdc channels per module
+ constant NUM_TDC_CHANNELS_POWER2 : integer range 0 to 6 := 4; --the nearest power of two, for convenience reasons
+ constant DOUBLE_EDGE_TYPE : integer range 0 to 3 := 3; --double edge type: 0, 1, 2, 3
+ -- 0: single edge only,
+ -- 1: same channel,
+ -- 2: alternating channels,
+ -- 3: same channel with stretcher
+ constant RING_BUFFER_SIZE : integer range 0 to 7 := 7; --ring buffer size: 0, 1, 2, 3, 7 --> change names in constraints file
+ --ring buffer size: 32,64,96,128,dyn
+ constant TDC_DATA_FORMAT : integer := 0;
+
+ constant EVENT_BUFFER_SIZE : integer range 9 to 13 := 13; -- size of the event buffer, 2**N
+ constant EVENT_MAX_SIZE : integer := 1023; --maximum event size. Should not exceed
+
+ constant GEN_BUSY_OUTPUT : integer := c_NO;
+
+ constant TRIGGER_COIN_COUNT : integer := 4;
+ constant TRIGGER_PULSER_COUNT : integer := 3;
+ constant TRIGGER_RAND_PULSER : integer := 1;
+ constant TRIGGER_ADDON_COUNT : integer := 6;
+ constant PERIPH_TRIGGER_COUNT : integer := 0;
+ constant ADDON_LINE_COUNT : integer := 36 - USE_RJADAPT*12; --36 with Padiwa, 22 with RJ-adapter
+ constant CTS_OUTPUT_MULTIPLEXERS : integer := 1;
+--TODO:
+-- constant INCLUDE_MBS_MASTER : integer range c_NO to c_YES := c_NO;
+--Which external trigger module (ETM) to use?
+ constant INCLUDE_ETM : integer range c_NO to c_YES := c_YES;
+ type ETM_CHOICE_type is (ETM_CHOICE_MBS_VULOM, ETM_CHOICE_MAINZ_A2, ETM_CHOICE_CBMNET, ETM_CHOICE_M26);
+ constant ETM_CHOICE : ETM_CHOICE_type := ETM_CHOICE_MBS_VULOM;
+ constant ETM_ID : std_logic_vector(7 downto 0);
+
+ constant INCLUDE_TIMESTAMP_GENERATOR : integer := c_NO;
+
+
+
+------------------------------------------------------------------------------
+--End of design configuration
+------------------------------------------------------------------------------
+
+ type data_t is array (0 to 1023) of std_logic_vector(7 downto 0);
+ constant LCD_DATA : data_t := (
+ x"36",x"48",x"3A",x"55",x"29",x"2A",x"00",x"00", --config don't touch
+ x"00",x"EF",x"2B",x"00",x"00",x"01",x"3F",x"2C", --config don't touch
+ x"00",x"00",x"00",x"00",x"00",x"00",x"00",x"00", --config don't touch
+ x"00",x"00",x"00",x"00",x"00",x"00",x"00",x"00", --config don't touch
+
+ x"48", x"75", x"62", x"41", x"64", x"64", x"4f", x"6e", x"0a",
+ x"0a",
+ x"41", x"64", x"64", x"72", x"65", x"73", x"73", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"80", x"0a",
+ x"43", x"6f", x"6d", x"70", x"69", x"6c", x"65", x"54", x"69", x"6d", x"65", x"20", x"20", x"84", x"83", x"0a",
+ x"54", x"69", x"6d", x"65", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"20", x"82", x"81", x"0a",
+ others => x"00");
+
+
+ type hub_mii_t is array(0 to 3) of integer;
+ type hub_ct is array(0 to 16) of integer;
+ type hub_cfg_t is array(0 to 3) of hub_ct;
+ type hw_info_t is array(0 to 3) of std_logic_vector(31 downto 0);
+ type intlist_t is array(0 to 7) of integer;
+-- 0 opt. link opt. link
+-- 0-7 SFP 1-8
+-- 1(8) CTS read-out internal 0 1 - X X O --downlink only
+-- 2(9) CTS TRG Sctrl GbE 2 3 4 X X X --uplink only
+
+ --Order:
+ -- no backplane, no AddOn, 1x SFP, 1x GBE
+-- -- -- -- no backplane, 4x AddOn, 1x SFP, 1x GBE
+ -- no backplane, 8x AddOn, 0x SFP, 1x GBE
+-- -- -- -- backplane, 9x backplane, 1x GBE
+ constant SFP_NUM_ARR : hub_mii_t := (1,0,8,0);
+ constant INTERFACE_NUM_ARR : hub_mii_t := (1,5,8,10);
+-- 0 1 2 3 4 5 6 7 8 9 a b c d e f
+ constant IS_UPLINK_ARR : hub_cfg_t := ((0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0),
+ (0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0),
+-- (0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0));
+ constant IS_DOWNLINK_ARR : hub_cfg_t := ((1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0),
+ (1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0),
+-- (1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0),
+ (1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0));
+ constant IS_UPLINK_ONLY_ARR : hub_cfg_t := ((0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0),
+ (0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0),
+-- (0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0));
+
+ constant INTERFACE_NUM : integer;
+ constant IS_UPLINK : hub_ct;
+ constant IS_DOWNLINK : hub_ct;
+ constant IS_UPLINK_ONLY : hub_ct;
+
+------------------------------------------------------------------------------
+--Select settings by configuration
+------------------------------------------------------------------------------
+ constant cts_rdo_additional_ports : integer := INCLUDE_TDC + INCLUDE_TIMESTAMP_GENERATOR + INCLUDE_ETM; --for TDC
+
+ constant HW_INFO_BASE : unsigned(31 downto 0) := x"9500A000";
+
+ constant CLOCK_FREQUENCY_ARR : intlist_t := (100,120, others => 0);
+ constant MEDIA_FREQUENCY_ARR : intlist_t := (200,240, others => 0);
+
+ --declare constants, filled in body
+ constant HARDWARE_INFO : std_logic_vector(31 downto 0);
+ constant CLOCK_FREQUENCY : integer;
+ constant MEDIA_FREQUENCY : integer;
+ constant INCLUDED_FEATURES : std_logic_vector(63 downto 0);
+
+
+end;
+
+package body config is
+--compute correct configuration mode
+
+ constant HARDWARE_INFO : std_logic_vector(31 downto 0) := std_logic_vector(
+ HW_INFO_BASE );
+ constant CLOCK_FREQUENCY : integer := CLOCK_FREQUENCY_ARR(USE_120_MHZ);
+ constant MEDIA_FREQUENCY : integer := MEDIA_FREQUENCY_ARR(USE_120_MHZ);
+
+ constant CFG_MODE : integer := USE_ADDON*2;--*2 + USE_BACKPLANE;
+
+ constant INTERFACE_NUM : integer := INTERFACE_NUM_ARR(CFG_MODE);
+ constant IS_UPLINK : hub_ct := IS_UPLINK_ARR(CFG_MODE);
+ constant IS_DOWNLINK : hub_ct := IS_DOWNLINK_ARR(CFG_MODE);
+ constant IS_UPLINK_ONLY : hub_ct := IS_UPLINK_ONLY_ARR(CFG_MODE);
+
+ function etm_id_func return std_logic_vector is
+ variable res : unsigned(7 downto 0);
+ begin
+ res := x"00";
+ if INCLUDE_ETM=c_YES then
+ res := x"60";
+ res := res + TO_UNSIGNED(ETM_CHOICE_type'pos(ETM_CHOICE), 4);
+ end if;
+ return std_logic_vector(res);
+ end function;
+
+ constant ETM_ID : std_logic_vector(7 downto 0) := etm_id_func;
+
+
+function generateIncludedFeatures return std_logic_vector is
+ variable t : std_logic_vector(63 downto 0);
+ begin
+ t := (others => '0');
+ t(63 downto 56) := std_logic_vector(to_unsigned(1,8)); --table version 1
+ t(3 downto 0) := std_logic_vector(TO_UNSIGNED(ETM_CHOICE_type'pos(ETM_CHOICE), 4));
+ t(7 downto 7) := std_logic_vector(to_unsigned(USE_RJADAPT,1));
+ t(11 downto 8) := std_logic_vector(to_unsigned(DOUBLE_EDGE_TYPE,4));
+ t(14 downto 12) := std_logic_vector(to_unsigned(RING_BUFFER_SIZE,3));
+ t(15 downto 15) := std_logic_vector(to_unsigned(INCLUDE_TDC,1)); --TDC
+ t(16 downto 16) := std_logic_vector(to_unsigned(INCLUDE_GBE,1)); --data via GbE
+ t(17 downto 17) := std_logic_vector(to_unsigned(INCLUDE_GBE,1)); --sctrl via GbE
+ t(23 downto 23) := std_logic_vector(to_unsigned(INCLUDE_GBE,1));
+ t(26 downto 24) := std_logic_vector(to_unsigned(SFP_NUM_ARR(CFG_MODE),3)); --num SFPs with TrbNet
+ t(28 downto 28) := std_logic_vector(to_unsigned(USE_BACKPLANE,1));
+ t(40 downto 40) := std_logic_vector(to_unsigned(INCLUDE_LCD,1));
+ t(42 downto 42) := std_logic_vector(to_unsigned(INCLUDE_SPI,1));
+ t(43 downto 43) := std_logic_vector(to_unsigned(INCLUDE_UART,1));
+ t(44 downto 44) := std_logic_vector(to_unsigned(INCLUDE_STATISTICS,1));
+ t(51 downto 48) := std_logic_vector(to_unsigned(INCLUDE_TRIGGER_LOGIC,4));
+ t(52 downto 52) := std_logic_vector(to_unsigned(USE_120_MHZ,1));
+ t(53 downto 53) := std_logic_vector(to_unsigned(USE_RXCLOCK,1));
+ t(54 downto 54) := std_logic_vector(to_unsigned(USE_EXTERNAL_CLOCK,1));
+ t(55 downto 55) := std_logic_vector(to_unsigned(USE_200MHZOSCILLATOR,1));
+ return t;
+ end function;
+
+ constant INCLUDED_FEATURES : std_logic_vector(63 downto 0) := generateIncludedFeatures;
+
+end package body;
#synplify_command => "/d/jspc29/lattice/synplify/J-2014.09-SP2/bin/synplify_premier_dp",
nodelist_file => 'nodes_cts_frankfurt.txt',
-pinout_file => 'trb3sc_hub',
+
+
+pinout_file => 'trb3sc_hub_ctsrj', #with RJ adapter for I/O
+# pinout_file => 'trb3sc_hub_kelpadiwa', #with SPI on KEL connectors
#Include only necessary lpf files
-#pinout_file => '', #name of pin-out file, if not equal TOPNAME
-include_TDC => 1,
+include_TDC => 0,
include_GBE => 1,
#Report settings
#implementation attributes
+set_option -vhdl2008 1
set_option -vlog_std v2001
set_option -project_relative_includes 1
impl -active "workdir"
BACK_GPIO : inout std_logic_vector( 3 downto 0);
SPARE_IN : in std_logic_vector( 1 downto 0);
- KEL : in std_logic_vector(40 downto 1);
+ INP : in std_logic_vector(31-12*USE_RJADAPT downto 0);
RJ_IO : out std_logic_vector( 3 downto 0); --0, inner RJ trigger output
+ REFOUT : out std_logic_vector( 8*USE_RJADAPT-1 downto 0);
--LED
LED_GREEN : out std_logic;
ADC_DOUT : in std_logic;
--SPI
--- DAC_OUT_SDO : out std_logic_vector(6 downto 5);
--- DAC_OUT_SCK : out std_logic_vector(6 downto 5);
--- DAC_OUT_CS : out std_logic_vector(6 downto 5);
--- DAC_IN_SDI : in std_logic_vector(6 downto 5);
+ DAC_OUT_SDO : out std_logic_vector(6 downto 5+2*USE_RJADAPT); --
+ DAC_OUT_SCK : out std_logic_vector(6 downto 5+2*USE_RJADAPT); --
+ DAC_OUT_CS : out std_logic_vector(6 downto 5+2*USE_RJADAPT); --
+ DAC_IN_SDI : in std_logic_vector(6 downto 5+2*USE_RJADAPT); --
--Flash, 1-wire, Reload
attribute syn_useioff of FLASH_OUT : signal is true;
attribute syn_useioff of SPARE_IN : signal is false;
- attribute syn_useioff of KEL : signal is false;
+ attribute syn_useioff of INP : signal is false;
end entity;
);
- make_reset : process begin
+ proc_make_reset : process begin
wait until rising_edge(clk_sys);
if(reset_via_gbe = '1') then
reset_via_gbe_long <= '1';
THE_CTS : CTS
generic map (
EXTERNAL_TRIGGER_ID => ETM_ID, -- fill in trigger logic enumeration id of external trigger logic
- PLATTFORM => 1, --TRB3sc+KEL+RJ45
+ PLATTFORM => 1+USE_RJADAPT, --TRB3sc+KEL+RJ45
OUTPUT_MULTIPLEXERS => CTS_OUTPUT_MULTIPLEXERS,
ADDON_GROUPS => 3,
- ADDON_GROUP_UPPER => (2,40,2, others => 0)
+ ADDON_GROUP_UPPER => (2,32-USE_RJADAPT*12,2, others => 0)
)
port map (
CLK => clk_sys,
FEE_DATA_FINISHED_OUT => cts_rdo_finished
);
+gen_inputs_kel : if USE_RJADAPT = 0 generate
cts_addon_triggers_in(1 downto 0) <= SPARE_IN(1 downto 0);
- cts_addon_triggers_in(41 downto 2) <= KEL(40 downto 1);
- cts_addon_triggers_in(43 downto 42) <= trigger_gen_outputs_i when rising_edge(clk_sys);
+ cts_addon_triggers_in(33 downto 2) <= INP(31 downto 0);
+ cts_addon_triggers_in(35 downto 34) <= trigger_gen_outputs_i when rising_edge(clk_sys);
+end generate;
+gen_inputs_rj : if USE_RJADAPT = 1 generate
+ cts_addon_triggers_in(1 downto 0) <= SPARE_IN(1 downto 0);
+ cts_addon_triggers_in(21 downto 2) <= INP(19 downto 0);
+ cts_addon_triggers_in(23 downto 22) <= trigger_gen_outputs_i when rising_edge(clk_sys);
+end generate;
+
buscts_tx.nack <= '0';
buscts_tx.ack <= '0';
---------------------------------------------------------------------------
-- Add timestamp generator
---------------------------------------------------------------------------
- GEN_TIMESTAMP : if INCLUDE_TIMESTAMP_GENERATOR = c_YES generate
- THE_TIMESTAMP : entity work.timestamp_generator
- port map(
- CLK => clk_sys,
- RESET_IN => reset_i,
-
- TIMER_CLOCK_IN => KEL(20),
- TIMER_RESET_IN => KEL(21),
-
- TRIGGER_IN => cts_trigger_out,
- BUSRDO_RX => cts_rdo_rx,
- BUSRDO_TX => cts_rdo_additional(0)
- );
- end generate;
-
- assert not(INCLUDE_ETM = c_YES and INCLUDE_TIMESTAMP_GENERATOR = c_YES) report "Timestamp generator and ETM can not be implemented at the same time (TODO: fix this)" severity failure;
-
+-- GEN_TIMESTAMP : if INCLUDE_TIMESTAMP_GENERATOR = c_YES generate
+-- THE_TIMESTAMP : entity work.timestamp_generator
+-- port map(
+-- CLK => clk_sys,
+-- RESET_IN => reset_i,
+--
+-- TIMER_CLOCK_IN => KEL(20),
+-- TIMER_RESET_IN => KEL(21),
+--
+-- TRIGGER_IN => cts_trigger_out,
+-- BUSRDO_RX => cts_rdo_rx,
+-- BUSRDO_TX => cts_rdo_additional(0)
+-- );
+-- end generate;
+--
+-- assert not(INCLUDE_ETM = c_YES and INCLUDE_TIMESTAMP_GENERATOR = c_YES) report "Timestamp generator and ETM can not be implemented at the same time (TODO: fix this)" severity failure;
+--
---------------------------------------------------------------------------
-- MBS receiver
---------------------------------------------------------------------------
CLK => clk_sys,
RESET_IN => reset_i,
- MBS_IN => KEL(20),
+ MBS_IN => INP(0),
CLK_200 => clk_full,
TRG_ASYNC_OUT => mbs_async_out, --TODO MBS async connect to TDC
DEBUG_OUT => open
);
-monitor_inputs_i <= KEL;
+monitor_inputs_i <= INP;
gen_reboot_no_gbe : if INCLUDE_GBE = c_NO generate
do_reboot_i <= common_ctrl_reg(15);
---------------------------------------------------------------------------
-- I/O
---------------------------------------------------------------------------
--- spi_miso(5 downto 4) <= DAC_IN_SDI(6 downto 5);
--- DAC_OUT_SCK(6 downto 5) <= spi_clk(5 downto 4);
--- DAC_OUT_CS(6 downto 5) <= spi_cs(5 downto 4);
--- DAC_OUT_SDO(6 downto 5) <= spi_mosi(5 downto 4);
--- spi_miso(3 downto 0) <= (others => '0');
--- spi_miso(15 downto 7) <= (others => '0');
+gen_SPI : if USE_RJADAPT = 0 generate
+ spi_miso(5 downto 4) <= DAC_IN_SDI(6 downto 5);
+ DAC_OUT_SCK(6 downto 5) <= spi_clk(5 downto 4);
+ DAC_OUT_CS(6 downto 5) <= spi_cs(5 downto 4);
+ DAC_OUT_SDO(6 downto 5) <= spi_mosi(5 downto 4);
+ spi_miso(3 downto 0) <= (others => '0');
+ spi_miso(15 downto 7) <= (others => '0');
+end generate;
+
+gen_reftime_out : if USE_RJADAPT = 1 generate
+ REFOUT <= (others => cts_trigger_out);
+end generate;
RJ_IO(0) <= cts_trigger_out;
-- not (med2int(8).stat_op(10) or med2int(8).stat_op(11) or not med2int(8).stat_op(9)) when INCLUDE_GBE = 1 and USE_BACKPLANE = 1 else
-- '1';
--------------------------------------------------------------------------------
--- TDC
--------------------------------------------------------------------------------
- THE_TDC : entity work.TDC_record
- generic map (
- CHANNEL_NUMBER => NUM_TDC_CHANNELS, -- Number of TDC channels per module
- STATUS_REG_NR => 21, -- Number of status regs
- DEBUG => c_YES,
- SIMULATION => c_NO)
- port map (
- RESET => reset_i,
- CLK_TDC => clk_full_osc,
- CLK_READOUT => clk_sys, -- Clock for the readout
- REFERENCE_TIME => cts_trigger_out, -- Reference time input
- HIT_IN => hit_in_i(NUM_TDC_CHANNELS-1 downto 1), -- Channel start signals
- HIT_CAL_IN => clk_cal, -- Hits for calibrating the TDC
- -- Trigger signals from handler
- BUSRDO_RX => cts_rdo_rx,
- BUSRDO_TX => cts_rdo_additional(INCLUDE_TIMESTAMP_GENERATOR + INCLUDE_ETM),
- -- Slow control bus
- BUS_RX => bustdc_rx,
- BUS_TX => bustdc_tx,
- -- Dubug signals
- INFO_IN => timer,
- LOGIC_ANALYSER_OUT => open
- );
-
- -- For single edge measurements
- gen_single : if DOUBLE_EDGE_TYPE = 0 or DOUBLE_EDGE_TYPE = 1 or DOUBLE_EDGE_TYPE = 3 generate
- hit_in_i(NUM_TDC_CHANNELS-1 downto 1) <= KEL(NUM_TDC_CHANNELS-1 downto 1);
- end generate;
-
--- --
--- -- -- For ToT Measurements
--- -- gen_double : if DOUBLE_EDGE_TYPE = 2 generate
--- -- Gen_Hit_In_Signals : for i in 0 to NUM_TDC_CHANNELS-2 generate
--- -- hit_in_i(i*2+1) <= INP(i+64);
--- -- hit_in_i(i*2+2) <= not INP(i+64);
--- -- end generate Gen_Hit_In_Signals;
--- -- end generate;
+-- -------------------------------------------------------------------------------
+-- -- TDC
+-- -------------------------------------------------------------------------------
+-- THE_TDC : entity work.TDC_record
+-- generic map (
+-- CHANNEL_NUMBER => NUM_TDC_CHANNELS, -- Number of TDC channels per module
+-- STATUS_REG_NR => 21, -- Number of status regs
+-- DEBUG => c_YES,
+-- SIMULATION => c_NO)
+-- port map (
+-- RESET => reset_i,
+-- CLK_TDC => clk_full_osc,
+-- CLK_READOUT => clk_sys, -- Clock for the readout
+-- REFERENCE_TIME => cts_trigger_out, -- Reference time input
+-- HIT_IN => hit_in_i(NUM_TDC_CHANNELS-1 downto 1), -- Channel start signals
+-- HIT_CAL_IN => clk_cal, -- Hits for calibrating the TDC
+-- -- Trigger signals from handler
+-- BUSRDO_RX => cts_rdo_rx,
+-- BUSRDO_TX => cts_rdo_additional(INCLUDE_TIMESTAMP_GENERATOR + INCLUDE_ETM),
+-- -- Slow control bus
+-- BUS_RX => bustdc_rx,
+-- BUS_TX => bustdc_tx,
+-- -- Dubug signals
+-- INFO_IN => timer,
+-- LOGIC_ANALYSER_OUT => open
+-- );
+--
+-- -- For single edge measurements
+-- gen_single : if DOUBLE_EDGE_TYPE = 0 or DOUBLE_EDGE_TYPE = 1 or DOUBLE_EDGE_TYPE = 3 generate
+-- hit_in_i(NUM_TDC_CHANNELS-1 downto 1) <= INP(NUM_TDC_CHANNELS-1 downto 1);
+-- end generate;
end architecture;
--- /dev/null
+#################################################################\r
+# Clock I/O\r
+#################################################################\r
+LOCATE COMP "CLK_SUPPL_PCLK" SITE "V9"; #was SUPPL_CLOCK3_P\r
+LOCATE COMP "CLK_CORE_PCLK" SITE "U9"; #was "CORE_CLOCK0_P"\r
+LOCATE COMP "CLK_EXT_PLL_LEFT" SITE "N7"; #was "EXT_CLOCK2_P"\r
+DEFINE PORT GROUP "CLK_group" "CLK*" ;\r
+IOBUF GROUP "CLK_group" IO_TYPE=LVDS25 DIFFRESISTOR=100;\r
+\r
+\r
+#################################################################\r
+# AddOn Connector\r
+#################################################################\r
+\r
+ LOCATE COMP "LED_HUB_LINKOK_1" SITE "AA2"; #was "DQLL0_0_P" 1\r
+ LOCATE COMP "LED_HUB_RX_1" SITE "AA1";\r
+ LOCATE COMP "LED_HUB_TX_1" SITE "AB2"; #was "DQLL0_1_P" 5\r
+ LOCATE COMP "HUB_MOD0_1" SITE "AB1";\r
+ LOCATE COMP "HUB_MOD1_1" SITE "AA4"; #was "DQLL0_2_P" 9\r
+ LOCATE COMP "HUB_MOD2_1" SITE "AA3";\r
+# LOCATE COMP "HUB_RATESEL_1" SITE "AA10"; #was "DQSLL0_T" 13\r
+ LOCATE COMP "HUB_TXDIS_1" SITE "AB9";\r
+ LOCATE COMP "HUB_LOS_1" SITE "AA5"; #was "DQLL0_3_P" 17\r
+# LOCATE COMP "HUB_TXFAULT_1" SITE "AB5";\r
+\r
+ LOCATE COMP "LED_HUB_LINKOK_2" SITE "Y7"; #was "DQLL0_4_P" 21\r
+ LOCATE COMP "LED_HUB_RX_2" SITE "AA7";\r
+ LOCATE COMP "LED_HUB_TX_2" SITE "AC5"; #was "DQLL2_0_P" 25\r
+ LOCATE COMP "HUB_MOD0_2" SITE "AC4";\r
+ LOCATE COMP "HUB_MOD1_2" SITE "AC2"; #was "DQLL2_1_P" 29\r
+ LOCATE COMP "HUB_MOD2_2" SITE "AC1";\r
+# LOCATE COMP "HUB_RATESEL_2" SITE "AB4"; #was "DQLL2_2_P" 33\r
+ LOCATE COMP "HUB_TXDIS_2" SITE "AB3";\r
+ LOCATE COMP "HUB_LOS_2" SITE "AD5"; #was "DQSLL2_T" 37\r
+# LOCATE COMP "HUB_TXFAULT_2" SITE "AE5";\r
+ \r
+ LOCATE COMP "LED_HUB_LINKOK_3" SITE "AE4"; #was "DQLL3_0_P" 2\r
+ LOCATE COMP "LED_HUB_RX_3" SITE "AE3";\r
+ LOCATE COMP "LED_HUB_TX_3" SITE "AB10"; #was "DQLL3_1_P" 6\r
+ LOCATE COMP "HUB_MOD0_3" SITE "AC10";\r
+ LOCATE COMP "HUB_MOD1_3" SITE "AE2"; #was "DQLL3_2_P" 10\r
+ LOCATE COMP "HUB_MOD2_3" SITE "AE1";\r
+# LOCATE COMP "HUB_RATESEL_3" SITE "AJ1"; #was "DQSLL3_T" 14\r
+ LOCATE COMP "HUB_TXDIS_3" SITE "AK1";\r
+ LOCATE COMP "HUB_LOS_3" SITE "AD4"; #was "DQLL3_3_P" 18\r
+# LOCATE COMP "HUB_TXFAULT_3" SITE "AD3";\r
+\r
+ LOCATE COMP "LED_HUB_LINKOK_4" SITE "AC9"; #was "DQLL3_4_P" 22\r
+ LOCATE COMP "LED_HUB_RX_4" SITE "AC8";\r
+ LOCATE COMP "LED_HUB_TX_4" SITE "Y2"; #was "DQLL1_0_P" 26\r
+ LOCATE COMP "HUB_MOD0_4" SITE "Y1";\r
+ LOCATE COMP "HUB_MOD1_4" SITE "W4"; #was "DQLL1_1_P" 30\r
+ LOCATE COMP "HUB_MOD2_4" SITE "W3";\r
+# LOCATE COMP "HUB_RATESEL_4" SITE "W2"; #was "DQLL1_2_P" 34\r
+ LOCATE COMP "HUB_TXDIS_4" SITE "W1";\r
+ LOCATE COMP "HUB_LOS_4" SITE "W6"; #was "DQSLL1_T" 38\r
+# LOCATE COMP "HUB_TXFAULT_4" SITE "Y6";\r
+\r
+ LOCATE COMP "LED_HUB_LINKOK_5" SITE "AD31"; #was "DQLR1_0_P" 169\r
+ LOCATE COMP "LED_HUB_RX_5" SITE "AD30";\r
+ LOCATE COMP "LED_HUB_TX_5" SITE "AB32"; #was "DQLR1_1_P" 173\r
+ LOCATE COMP "HUB_MOD0_5" SITE "AB31";\r
+ LOCATE COMP "HUB_MOD1_5" SITE "AE34"; #was "DQLR1_2_P" 177\r
+ LOCATE COMP "HUB_MOD2_5" SITE "AE33";\r
+# LOCATE COMP "HUB_RATESEL_5" SITE "AB26"; #was "DQSLR1_T" 181\r
+ LOCATE COMP "HUB_TXDIS_5" SITE "AB25";\r
+ LOCATE COMP "HUB_LOS_5" SITE "AD33"; #was "DQLR1_3_P" 185\r
+# LOCATE COMP "HUB_TXFAULT_5" SITE "AD34"\r
+\r
+ LOCATE COMP "LED_HUB_LINKOK_6" SITE "W30"; #was "DQLR2_0_P" 170\r
+ LOCATE COMP "LED_HUB_RX_6" SITE "W29";\r
+ LOCATE COMP "LED_HUB_TX_6" SITE "W27"; #was "DQLR2_1_P" 174\r
+ LOCATE COMP "HUB_MOD0_6" SITE "W26";\r
+ LOCATE COMP "HUB_MOD1_6" SITE "W34"; #was "DQLR2_2_P" 178\r
+ LOCATE COMP "HUB_MOD2_6" SITE "W33";\r
+# LOCATE COMP "HUB_RATESEL_6" SITE "Y30"; #was "DQSLR2_T" 182\r
+ LOCATE COMP "HUB_TXDIS_6" SITE "AA29";\r
+ LOCATE COMP "HUB_LOS_6" SITE "Y34"; #was "DQLR2_3_P" 186\r
+# LOCATE COMP "HUB_TXFAULT_6" SITE "Y33";\r
+\r
+ LOCATE COMP "LED_HUB_LINKOK_7" SITE "AB34"; #was "DQLR0_0_P" 129\r
+ LOCATE COMP "LED_HUB_RX_7" SITE "AB33";\r
+ LOCATE COMP "LED_HUB_TX_7" SITE "AA25"; #was "DQLR0_1_P" 133\r
+ LOCATE COMP "HUB_MOD0_7" SITE "AA26";\r
+ LOCATE COMP "HUB_MOD1_7" SITE "AC34"; #was "DQLR0_2_P" 137\r
+ LOCATE COMP "HUB_MOD2_7" SITE "AC33";\r
+# LOCATE COMP "HUB_RATESEL_7" SITE "AB30"; #was "DQSLR0_T" 141\r
+ LOCATE COMP "HUB_TXDIS_7" SITE "AC30";\r
+ LOCATE COMP "HUB_LOS_7" SITE "L26"; #was "DQUR0_0_P" 105 #SITE "AA31"; #was "DQLR0_3_P" 145\r
+# LOCATE COMP "HUB_TXFAULT_7" SITE "AA30"\r
+\r
+ LOCATE COMP "LED_HUB_LINKOK_8" SITE "T32"; #was "DQUR2_0_P" 130\r
+ LOCATE COMP "LED_HUB_RX_8" SITE "T31";\r
+ LOCATE COMP "LED_HUB_TX_8" SITE "T26"; #was "DQUR2_1_P" 134\r
+ LOCATE COMP "HUB_MOD0_8" SITE "T27";\r
+ LOCATE COMP "HUB_MOD1_8" SITE "U32"; #was "DQUR2_2_P" 138\r
+ LOCATE COMP "HUB_MOD2_8" SITE "U31";\r
+# LOCATE COMP "HUB_RATESEL_8" SITE "T30"; #was "DQSUR2_T" 142\r
+ LOCATE COMP "HUB_TXDIS_8" SITE "U30";\r
+ LOCATE COMP "HUB_LOS_8" SITE "T34"; #was "DQUR2_3_P" 146\r
+# LOCATE COMP "HUB_TXFAULT_8" SITE "T33";\r
+\r
+DEFINE PORT GROUP "HUB_group" "HUB*" ;\r
+IOBUF GROUP "HUB_group" IO_TYPE=LVCMOS25 PULLMODE=UP;\r
+DEFINE PORT GROUP "LED_HUB_group" "LED_HUB*" ;\r
+IOBUF GROUP "LED_HUB_group" IO_TYPE=LVCMOS25 PULLMODE=UP;\r
+\r
+\r
+#################################################################\r
+# Pin-header IO\r
+#################################################################\r
+\r
+\r
+# LOCATE COMP "DAC_IN_SDI_5" SITE "P7";\r
+# LOCATE COMP "DAC_IN_SDI_6" SITE "M29";\r
+# DEFINE PORT GROUP "IN_group" "DAC_IN*" ;\r
+# IOBUF GROUP "IN_group" IO_TYPE=LVDS25 DIFFRESISTOR=100;\r
+# \r
+# \r
+# LOCATE COMP "DAC_OUT_SDO_5" SITE "R8";\r
+# LOCATE COMP "DAC_OUT_SCK_5" SITE "R2";\r
+# LOCATE COMP "DAC_OUT_CS_5" SITE "P9";\r
+# LOCATE COMP "DAC_OUT_SDO_6" SITE "AC28";\r
+# LOCATE COMP "DAC_OUT_SCK_6" SITE "M34";\r
+# LOCATE COMP "DAC_OUT_CS_6" SITE "L28";\r
+# DEFINE PORT GROUP "OUT_group" "DAC_OUT*" ;\r
+# IOBUF GROUP "OUT_group" IO_TYPE=LVDS25 DIFFRESISTOR=OFF;\r
+\r
+LOCATE COMP "INP_0" SITE "AL34"; #57 A3_P\r
+LOCATE COMP "INP_1" SITE "AL31"; #53 A4_P\r
+LOCATE COMP "INP_2" SITE "AP29"; #41 B3_P\r
+LOCATE COMP "INP_3" SITE "P7"; #33 B4_P\r
+LOCATE COMP "INP_4" SITE "T2"; #31 C3_P\r
+LOCATE COMP "INP_5" SITE "T9"; #29 C4_P\r
+LOCATE COMP "INP_6" SITE "AM6"; #11 D3_P\r
+LOCATE COMP "INP_7" SITE "AN1"; #5 D4_P\r
+LOCATE COMP "INP_8" SITE "AL32"; #63 G3_P\r
+LOCATE COMP "INP_9" SITE "AE32"; #67 G4_P\r
+LOCATE COMP "INP_10" SITE "AN34"; #45 H3_P\r
+LOCATE COMP "INP_11" SITE "AN32"; #49 H4_P\r
+LOCATE COMP "INP_12" SITE "V4"; #25 I3_P\r
+LOCATE COMP "INP_13" SITE "V5"; #27 I4_P\r
+LOCATE COMP "INP_14" SITE "AL4"; #13 J3_P\r
+LOCATE COMP "INP_15" SITE "AJ2"; #17 J4_P\r
+LOCATE COMP "INP_16" SITE "AH33"; #61 X1_P\r
+LOCATE COMP "INP_17" SITE "AE30"; #69 X2_P\r
+LOCATE COMP "INP_18" SITE "AD26"; #71 X3_P\r
+LOCATE COMP "INP_19" SITE "M29"; #73 X4_P\r
+\r
+# LOCATE COMP "KEL_10" SITE "AL3"; #19 D2_P\r
+# LOCATE COMP "KEL_11" SITE "AD9"; #21 I2_P\r
+# LOCATE COMP "KEL_19" SITE "R2"; #37 H2_P\r
+# LOCATE COMP "KEL_20" SITE "P9"; #39 B2_P\r
+# LOCATE COMP "KEL_26" SITE "AM29"; #51 G2_P\r
+# LOCATE COMP "KEL_28" SITE "AL30"; #55 A2_P\r
+# LOCATE COMP "KEL_33" SITE "AF32"; #65 GND\r
+# LOCATE COMP "KEL_38" SITE "AC28"; #75 \r
+# LOCATE COMP "KEL_39" SITE "M34"; #77\r
+# LOCATE COMP "KEL_40" SITE "L28"; #79\r
+# LOCATE COMP "KEL_4" SITE "AN3"; #7 J2_P\r
+# LOCATE COMP "KEL_8" SITE "AJ5"; #15 C2_P\r
+\r
+LOCATE COMP "REFOUT_0" SITE "AJ31"; #59 A1_P\r
+LOCATE COMP "REFOUT_1" SITE "AP33"; #43 B1_P\r
+LOCATE COMP "REFOUT_2" SITE "AJ4"; #23 C1_P\r
+LOCATE COMP "REFOUT_3" SITE "AP2"; #3 D1_P\r
+LOCATE COMP "REFOUT_4" SITE "AP31"; #47 G1_P\r
+LOCATE COMP "REFOUT_5" SITE "R8"; #35 H1_P\r
+LOCATE COMP "REFOUT_6" SITE "AL5"; #9 I1_P\r
+LOCATE COMP "REFOUT_7" SITE "AP5"; #1 J1_P\r
+\r
+DEFINE PORT GROUP "REFOUT_group" "REFOUT*" ;\r
+IOBUF GROUP "REFOUT_group" IO_TYPE=LVDS25 ;\r
+\r
+DEFINE PORT GROUP "INP_group" "INP*" ;\r
+IOBUF GROUP "INP_group" IO_TYPE=LVDS25 DIFFRESISTOR=100;\r
+\r
+\r
+#################################################################\r
+# Pin-header IO\r
+#################################################################\r
+LOCATE COMP "HDR_IO_1" SITE "AP28";\r
+LOCATE COMP "HDR_IO_2" SITE "AN28";\r
+LOCATE COMP "HDR_IO_3" SITE "AP27";\r
+LOCATE COMP "HDR_IO_4" SITE "AN27";\r
+LOCATE COMP "HDR_IO_5" SITE "AM27";\r
+LOCATE COMP "HDR_IO_6" SITE "AL27";\r
+LOCATE COMP "HDR_IO_7" SITE "AH26";\r
+LOCATE COMP "HDR_IO_8" SITE "AG26";\r
+LOCATE COMP "HDR_IO_9" SITE "AM28";\r
+LOCATE COMP "HDR_IO_10" SITE "AL28";\r
+DEFINE PORT GROUP "HDR_group" "HDR*" ;\r
+IOBUF GROUP "HDR_group" IO_TYPE=LVCMOS25 PULLMODE=DOWN ;\r
+\r
+#################################################################\r
+# Many LED\r
+#################################################################\r
+LOCATE COMP "LED_RJ_GREEN_0" SITE "C25";\r
+LOCATE COMP "LED_RJ_RED_0" SITE "D25";\r
+LOCATE COMP "LED_GREEN" SITE "D24";\r
+LOCATE COMP "LED_ORANGE" SITE "E24";\r
+LOCATE COMP "LED_RED" SITE "K23";\r
+LOCATE COMP "LED_RJ_GREEN_1" SITE "G26";\r
+LOCATE COMP "LED_RJ_RED_1" SITE "G25";\r
+LOCATE COMP "LED_YELLOW" SITE "K24";\r
+IOBUF PORT "LED_RJ_GREEN_0" IO_TYPE=LVCMOS25 ;\r
+IOBUF PORT "LED_RJ_RED_0" IO_TYPE=LVCMOS25 ;\r
+IOBUF PORT "LED_GREEN" IO_TYPE=LVCMOS25 ;\r
+IOBUF PORT "LED_ORANGE" IO_TYPE=LVCMOS25 ;\r
+IOBUF PORT "LED_RED" IO_TYPE=LVCMOS25 ;\r
+IOBUF PORT "LED_RJ_GREEN_1" IO_TYPE=LVCMOS25 ;\r
+IOBUF PORT "LED_RJ_RED_1" IO_TYPE=LVCMOS25 ;\r
+IOBUF PORT "LED_YELLOW" IO_TYPE=LVCMOS25 ;\r
+\r
+LOCATE COMP "LED_SFP_GREEN_0" SITE "B4";\r
+LOCATE COMP "LED_SFP_GREEN_1" SITE "A6";\r
+LOCATE COMP "LED_SFP_RED_0" SITE "A3";\r
+LOCATE COMP "LED_SFP_RED_1" SITE "A8";\r
+DEFINE PORT GROUP "LED_SFP_group" "LED_SFP*" ;\r
+IOBUF GROUP "LED_SFP_group" IO_TYPE=LVTTL33 ;\r
+\r
+LOCATE COMP "LED_WHITE_0" SITE "A32";\r
+LOCATE COMP "LED_WHITE_1" SITE "A33";\r
+DEFINE PORT GROUP "LED_WHITE_group" "LED_WHITE*" ;\r
+IOBUF GROUP "LED_WHITE_group" IO_TYPE=LVTTL33 ;\r
+\r
+#################################################################\r
+# SFP Control Signals\r
+#################################################################\r
+LOCATE COMP "SFP_LOS_0" SITE "B6";\r
+LOCATE COMP "SFP_LOS_1" SITE "C9";\r
+LOCATE COMP "SFP_MOD0_0" SITE "A5";\r
+LOCATE COMP "SFP_MOD0_1" SITE "K11";\r
+LOCATE COMP "SFP_MOD1_0" SITE "B7";\r
+LOCATE COMP "SFP_MOD1_1" SITE "J11";\r
+LOCATE COMP "SFP_MOD2_0" SITE "A7";\r
+LOCATE COMP "SFP_MOD2_1" SITE "D9";\r
+LOCATE COMP "SFP_TX_DIS_0" SITE "D6";\r
+LOCATE COMP "SFP_TX_DIS_1" SITE "A9";\r
+\r
+DEFINE PORT GROUP "SFP_group" "SFP*" ;\r
+IOBUF GROUP "SFP_group" IO_TYPE=LVTTL33 ;\r
+\r
+\r
+\r
+#################################################################\r
+# Serdes Output Switch\r
+#################################################################\r
+LOCATE COMP "PCSSW_ENSMB" SITE "B3";\r
+LOCATE COMP "PCSSW_EQ_0" SITE "B1";\r
+LOCATE COMP "PCSSW_EQ_1" SITE "B2";\r
+LOCATE COMP "PCSSW_EQ_2" SITE "E4";\r
+LOCATE COMP "PCSSW_EQ_3" SITE "D4";\r
+LOCATE COMP "PCSSW_PE_0" SITE "C3";\r
+LOCATE COMP "PCSSW_PE_1" SITE "C4";\r
+LOCATE COMP "PCSSW_PE_2" SITE "D3";\r
+LOCATE COMP "PCSSW_PE_3" SITE "C2";\r
+LOCATE COMP "PCSSW_1" SITE "D5";\r
+LOCATE COMP "PCSSW_0" SITE "A2";\r
+LOCATE COMP "PCSSW_2" SITE "E13";\r
+LOCATE COMP "PCSSW_3" SITE "F13";\r
+LOCATE COMP "PCSSW_4" SITE "G13";\r
+LOCATE COMP "PCSSW_5" SITE "H14";\r
+LOCATE COMP "PCSSW_6" SITE "A13";\r
+LOCATE COMP "PCSSW_7" SITE "B13";\r
+DEFINE PORT GROUP "PCSSW_group" "PCSSW*" ;\r
+IOBUF GROUP "PCSSW_group" IO_TYPE=LVTTL33 PULLMODE=DOWN ;\r
+\r
+\r
+#################################################################\r
+# ADC\r
+#################################################################\r
+LOCATE COMP "ADC_CLK" SITE "A14"; \r
+LOCATE COMP "ADC_CS" SITE "B14"; \r
+LOCATE COMP "ADC_DIN" SITE "G17"; \r
+LOCATE COMP "ADC_DOUT" SITE "G16"; \r
+IOBUF PORT "ADC_CLK" IO_TYPE=LVTTL33 PULLMODE=UP DRIVE=4 ;\r
+IOBUF PORT "ADC_CS" IO_TYPE=LVTTL33 PULLMODE=UP DRIVE=4 ;\r
+IOBUF PORT "ADC_DIN" IO_TYPE=LVTTL33 PULLMODE=UP DRIVE=4 ;\r
+IOBUF PORT "ADC_DOUT" IO_TYPE=LVTTL33 PULLMODE=UP ;\r
+\r
+#################################################################\r
+# RJ-45 connectors\r
+#################################################################\r
+LOCATE COMP "RJ_IO_0" SITE "R28";\r
+LOCATE COMP "RJ_IO_1" SITE "R31";\r
+LOCATE COMP "RJ_IO_2" SITE "R26";\r
+LOCATE COMP "RJ_IO_3" SITE "R34";\r
+#LOCATE COMP "RJ_IO_1_N" SITE "R27";\r
+#LOCATE COMP "RJ_IO_2_N" SITE "R30";\r
+#LOCATE COMP "RJ_IO_3_N" SITE "R25";\r
+#LOCATE COMP "RJ_IO_4_N" SITE "R33";\r
+IOBUF PORT "RJ_IO_0" IO_TYPE=LVDS25 ;\r
+IOBUF PORT "RJ_IO_1" IO_TYPE=LVDS25 ;\r
+IOBUF PORT "RJ_IO_2" IO_TYPE=LVDS25E ;\r
+IOBUF PORT "RJ_IO_3" IO_TYPE=LVDS25E ;\r
+\r
+\r
+LOCATE COMP "SPARE_IN_0" SITE "K31";\r
+LOCATE COMP "SPARE_IN_1" SITE "R4";\r
+#LOCATE COMP "SPARE_IN0_N" SITE "K32";\r
+#LOCATE COMP "SPARE_IN1_N" SITE "R3";\r
+IOBUF PORT "SPARE_IN_0" IO_TYPE=LVDS25 DIFFRESISTOR=100 ;\r
+IOBUF PORT "SPARE_IN_1" IO_TYPE=LVDS25 DIFFRESISTOR=100 ;\r
+\r
+#################################################################\r
+# Backplane I/O\r
+#################################################################\r
+LOCATE COMP "BACK_GPIO_0" SITE "C26";\r
+LOCATE COMP "BACK_GPIO_1" SITE "D26";\r
+LOCATE COMP "BACK_GPIO_2" SITE "B27";\r
+LOCATE COMP "BACK_GPIO_3" SITE "C27";\r
+LOCATE COMP "BACK_GPIO_4" SITE "D27";\r
+LOCATE COMP "BACK_GPIO_5" SITE "E27";\r
+LOCATE COMP "BACK_GPIO_6" SITE "B28";\r
+LOCATE COMP "BACK_GPIO_7" SITE "A28";\r
+LOCATE COMP "BACK_GPIO_8" SITE "A26";\r
+LOCATE COMP "BACK_GPIO_9" SITE "A27";\r
+LOCATE COMP "BACK_GPIO_10" SITE "A29";\r
+LOCATE COMP "BACK_GPIO_11" SITE "A30";\r
+LOCATE COMP "BACK_GPIO_12" SITE "H26";\r
+LOCATE COMP "BACK_GPIO_13" SITE "H25";\r
+LOCATE COMP "BACK_GPIO_14" SITE "A31";\r
+LOCATE COMP "BACK_GPIO_15" SITE "B31";\r
+DEFINE PORT GROUP "BACK_GPIO_group" "BACK_GPIO*" ;\r
+IOBUF GROUP "BACK_GPIO_group" IO_TYPE=LVCMOS25 PULLMODE=UP;\r
+\r
+LOCATE COMP "BACK_LVDS_0" SITE "V2";\r
+LOCATE COMP "BACK_LVDS_1" SITE "T4";\r
+# LOCATE COMP "BACK_LVDS_0_N" SITE "V1";\r
+# LOCATE COMP "BACK_LVDS_1_N" SITE "T3";\r
+DEFINE PORT GROUP "BACK_LVDS_group" "BACK_LVDS*" ;\r
+IOBUF GROUP "BACK_LVDS_group" IO_TYPE=LVDS25;\r
+\r
+\r
+#################################################################\r
+# Flash ROM and Reboot\r
+#################################################################\r
+LOCATE COMP "FLASH_CLK" SITE "F34"; #was "SPI_CLK"\r
+LOCATE COMP "FLASH_CS" SITE "D34"; #was "SPI_CS" \r
+LOCATE COMP "FLASH_IN" SITE "F33"; #was "SPI_IN" \r
+LOCATE COMP "FLASH_OUT" SITE "F32"; #was "SPI_OUT"\r
+LOCATE COMP "PROGRAMN" SITE "C31";\r
+\r
+DEFINE PORT GROUP "FLASH_group" "FLASH*" ;\r
+IOBUF GROUP "FLASH_group" IO_TYPE=LVTTL33 PULLMODE=NONE;\r
+IOBUF PORT "PROGRAMN" IO_TYPE=LVTTL33 PULLMODE=UP DRIVE=8 ;\r
+\r
+LOCATE COMP "ENPIRION_CLOCK" SITE "H23";\r
+IOBUF PORT "ENPIRION_CLOCK" IO_TYPE=LVCMOS25 PULLMODE=UP DRIVE=8 ;\r
+\r
+\r
+#################################################################\r
+# Misc\r
+#################################################################\r
+LOCATE COMP "TEMPSENS" SITE "J13"; #was TEMP_OWB\r
+IOBUF PORT "TEMPSENS" IO_TYPE=LVTTL33 PULLMODE=UP DRIVE=8 ;\r
+\r
+\r
+#################################################################\r
+# Test I/O\r
+#################################################################\r
+LOCATE COMP "TEST_LINE_0" SITE "A19";\r
+LOCATE COMP "TEST_LINE_1" SITE "B19";\r
+LOCATE COMP "TEST_LINE_2" SITE "K20";\r
+LOCATE COMP "TEST_LINE_3" SITE "L19";\r
+LOCATE COMP "TEST_LINE_4" SITE "C19";\r
+LOCATE COMP "TEST_LINE_5" SITE "D19";\r
+LOCATE COMP "TEST_LINE_6" SITE "J19";\r
+LOCATE COMP "TEST_LINE_7" SITE "K19";\r
+LOCATE COMP "TEST_LINE_8" SITE "A20";\r
+LOCATE COMP "TEST_LINE_9" SITE "B20";\r
+LOCATE COMP "TEST_LINE_10" SITE "G20";\r
+LOCATE COMP "TEST_LINE_11" SITE "G21";\r
+LOCATE COMP "TEST_LINE_12" SITE "C20";\r
+LOCATE COMP "TEST_LINE_13" SITE "D20";\r
+LOCATE COMP "TEST_LINE_14" SITE "F21";\r
+LOCATE COMP "TEST_LINE_15" SITE "F22";\r
+DEFINE PORT GROUP "TEST_LINE_group" "TEST_LINE*" ;\r
+IOBUF GROUP "TEST_LINE_group" IO_TYPE=LVCMOS25 PULLMODE=DOWN DRIVE=8;\r
--- /dev/null
+#################################################################\r
+# Clock I/O\r
+#################################################################\r
+LOCATE COMP "CLK_SUPPL_PCLK" SITE "V9"; #was SUPPL_CLOCK3_P\r
+LOCATE COMP "CLK_CORE_PCLK" SITE "U9"; #was "CORE_CLOCK0_P"\r
+LOCATE COMP "CLK_EXT_PLL_LEFT" SITE "N7"; #was "EXT_CLOCK2_P"\r
+DEFINE PORT GROUP "CLK_group" "CLK*" ;\r
+IOBUF GROUP "CLK_group" IO_TYPE=LVDS25 DIFFRESISTOR=100;\r
+\r
+\r
+#################################################################\r
+# AddOn Connector\r
+#################################################################\r
+\r
+ LOCATE COMP "LED_HUB_LINKOK_1" SITE "AA2"; #was "DQLL0_0_P" 1\r
+ LOCATE COMP "LED_HUB_RX_1" SITE "AA1";\r
+ LOCATE COMP "LED_HUB_TX_1" SITE "AB2"; #was "DQLL0_1_P" 5\r
+ LOCATE COMP "HUB_MOD0_1" SITE "AB1";\r
+ LOCATE COMP "HUB_MOD1_1" SITE "AA4"; #was "DQLL0_2_P" 9\r
+ LOCATE COMP "HUB_MOD2_1" SITE "AA3";\r
+# LOCATE COMP "HUB_RATESEL_1" SITE "AA10"; #was "DQSLL0_T" 13\r
+ LOCATE COMP "HUB_TXDIS_1" SITE "AB9";\r
+ LOCATE COMP "HUB_LOS_1" SITE "AA5"; #was "DQLL0_3_P" 17\r
+# LOCATE COMP "HUB_TXFAULT_1" SITE "AB5";\r
+\r
+ LOCATE COMP "LED_HUB_LINKOK_2" SITE "Y7"; #was "DQLL0_4_P" 21\r
+ LOCATE COMP "LED_HUB_RX_2" SITE "AA7";\r
+ LOCATE COMP "LED_HUB_TX_2" SITE "AC5"; #was "DQLL2_0_P" 25\r
+ LOCATE COMP "HUB_MOD0_2" SITE "AC4";\r
+ LOCATE COMP "HUB_MOD1_2" SITE "AC2"; #was "DQLL2_1_P" 29\r
+ LOCATE COMP "HUB_MOD2_2" SITE "AC1";\r
+# LOCATE COMP "HUB_RATESEL_2" SITE "AB4"; #was "DQLL2_2_P" 33\r
+ LOCATE COMP "HUB_TXDIS_2" SITE "AB3";\r
+ LOCATE COMP "HUB_LOS_2" SITE "AD5"; #was "DQSLL2_T" 37\r
+# LOCATE COMP "HUB_TXFAULT_2" SITE "AE5";\r
+ \r
+ LOCATE COMP "LED_HUB_LINKOK_3" SITE "AE4"; #was "DQLL3_0_P" 2\r
+ LOCATE COMP "LED_HUB_RX_3" SITE "AE3";\r
+ LOCATE COMP "LED_HUB_TX_3" SITE "AB10"; #was "DQLL3_1_P" 6\r
+ LOCATE COMP "HUB_MOD0_3" SITE "AC10";\r
+ LOCATE COMP "HUB_MOD1_3" SITE "AE2"; #was "DQLL3_2_P" 10\r
+ LOCATE COMP "HUB_MOD2_3" SITE "AE1";\r
+# LOCATE COMP "HUB_RATESEL_3" SITE "AJ1"; #was "DQSLL3_T" 14\r
+ LOCATE COMP "HUB_TXDIS_3" SITE "AK1";\r
+ LOCATE COMP "HUB_LOS_3" SITE "AD4"; #was "DQLL3_3_P" 18\r
+# LOCATE COMP "HUB_TXFAULT_3" SITE "AD3";\r
+\r
+ LOCATE COMP "LED_HUB_LINKOK_4" SITE "AC9"; #was "DQLL3_4_P" 22\r
+ LOCATE COMP "LED_HUB_RX_4" SITE "AC8";\r
+ LOCATE COMP "LED_HUB_TX_4" SITE "Y2"; #was "DQLL1_0_P" 26\r
+ LOCATE COMP "HUB_MOD0_4" SITE "Y1";\r
+ LOCATE COMP "HUB_MOD1_4" SITE "W4"; #was "DQLL1_1_P" 30\r
+ LOCATE COMP "HUB_MOD2_4" SITE "W3";\r
+# LOCATE COMP "HUB_RATESEL_4" SITE "W2"; #was "DQLL1_2_P" 34\r
+ LOCATE COMP "HUB_TXDIS_4" SITE "W1";\r
+ LOCATE COMP "HUB_LOS_4" SITE "W6"; #was "DQSLL1_T" 38\r
+# LOCATE COMP "HUB_TXFAULT_4" SITE "Y6";\r
+\r
+ LOCATE COMP "LED_HUB_LINKOK_5" SITE "AD31"; #was "DQLR1_0_P" 169\r
+ LOCATE COMP "LED_HUB_RX_5" SITE "AD30";\r
+ LOCATE COMP "LED_HUB_TX_5" SITE "AB32"; #was "DQLR1_1_P" 173\r
+ LOCATE COMP "HUB_MOD0_5" SITE "AB31";\r
+ LOCATE COMP "HUB_MOD1_5" SITE "AE34"; #was "DQLR1_2_P" 177\r
+ LOCATE COMP "HUB_MOD2_5" SITE "AE33";\r
+# LOCATE COMP "HUB_RATESEL_5" SITE "AB26"; #was "DQSLR1_T" 181\r
+ LOCATE COMP "HUB_TXDIS_5" SITE "AB25";\r
+ LOCATE COMP "HUB_LOS_5" SITE "AD33"; #was "DQLR1_3_P" 185\r
+# LOCATE COMP "HUB_TXFAULT_5" SITE "AD34"\r
+\r
+ LOCATE COMP "LED_HUB_LINKOK_6" SITE "W30"; #was "DQLR2_0_P" 170\r
+ LOCATE COMP "LED_HUB_RX_6" SITE "W29";\r
+ LOCATE COMP "LED_HUB_TX_6" SITE "W27"; #was "DQLR2_1_P" 174\r
+ LOCATE COMP "HUB_MOD0_6" SITE "W26";\r
+ LOCATE COMP "HUB_MOD1_6" SITE "W34"; #was "DQLR2_2_P" 178\r
+ LOCATE COMP "HUB_MOD2_6" SITE "W33";\r
+# LOCATE COMP "HUB_RATESEL_6" SITE "Y30"; #was "DQSLR2_T" 182\r
+ LOCATE COMP "HUB_TXDIS_6" SITE "AA29";\r
+ LOCATE COMP "HUB_LOS_6" SITE "Y34"; #was "DQLR2_3_P" 186\r
+# LOCATE COMP "HUB_TXFAULT_6" SITE "Y33";\r
+\r
+ LOCATE COMP "LED_HUB_LINKOK_7" SITE "AB34"; #was "DQLR0_0_P" 129\r
+ LOCATE COMP "LED_HUB_RX_7" SITE "AB33";\r
+ LOCATE COMP "LED_HUB_TX_7" SITE "AA25"; #was "DQLR0_1_P" 133\r
+ LOCATE COMP "HUB_MOD0_7" SITE "AA26";\r
+ LOCATE COMP "HUB_MOD1_7" SITE "AC34"; #was "DQLR0_2_P" 137\r
+ LOCATE COMP "HUB_MOD2_7" SITE "AC33";\r
+# LOCATE COMP "HUB_RATESEL_7" SITE "AB30"; #was "DQSLR0_T" 141\r
+ LOCATE COMP "HUB_TXDIS_7" SITE "AC30";\r
+ LOCATE COMP "HUB_LOS_7" SITE "L26"; #was "DQUR0_0_P" 105 #SITE "AA31"; #was "DQLR0_3_P" 145\r
+# LOCATE COMP "HUB_TXFAULT_7" SITE "AA30"\r
+\r
+ LOCATE COMP "LED_HUB_LINKOK_8" SITE "T32"; #was "DQUR2_0_P" 130\r
+ LOCATE COMP "LED_HUB_RX_8" SITE "T31";\r
+ LOCATE COMP "LED_HUB_TX_8" SITE "T26"; #was "DQUR2_1_P" 134\r
+ LOCATE COMP "HUB_MOD0_8" SITE "T27";\r
+ LOCATE COMP "HUB_MOD1_8" SITE "U32"; #was "DQUR2_2_P" 138\r
+ LOCATE COMP "HUB_MOD2_8" SITE "U31";\r
+# LOCATE COMP "HUB_RATESEL_8" SITE "T30"; #was "DQSUR2_T" 142\r
+ LOCATE COMP "HUB_TXDIS_8" SITE "U30";\r
+ LOCATE COMP "HUB_LOS_8" SITE "T34"; #was "DQUR2_3_P" 146\r
+# LOCATE COMP "HUB_TXFAULT_8" SITE "T33";\r
+\r
+DEFINE PORT GROUP "HUB_group" "HUB*" ;\r
+IOBUF GROUP "HUB_group" IO_TYPE=LVCMOS25 PULLMODE=UP;\r
+DEFINE PORT GROUP "LED_HUB_group" "LED_HUB*" ;\r
+IOBUF GROUP "LED_HUB_group" IO_TYPE=LVCMOS25 PULLMODE=UP;\r
+\r
+\r
+#################################################################\r
+# Pin-header IO\r
+#################################################################\r
+#on KEL1\r
+LOCATE COMP "INP_0" SITE "AP5";\r
+LOCATE COMP "INP_1" SITE "AP2";\r
+LOCATE COMP "INP_2" SITE "AN1";\r
+LOCATE COMP "INP_3" SITE "AN3";\r
+LOCATE COMP "INP_4" SITE "AL5";\r
+LOCATE COMP "INP_5" SITE "AM6";\r
+LOCATE COMP "INP_6" SITE "AL4";\r
+LOCATE COMP "INP_7" SITE "AJ5";\r
+LOCATE COMP "INP_8" SITE "AJ2";\r
+LOCATE COMP "INP_9" SITE "AL3";\r
+LOCATE COMP "INP_10" SITE "AD9";\r
+LOCATE COMP "INP_11" SITE "AJ4";\r
+LOCATE COMP "INP_12" SITE "V4";\r
+LOCATE COMP "INP_13" SITE "V5"; \r
+LOCATE COMP "INP_14" SITE "T9";\r
+LOCATE COMP "INP_15" SITE "T2";\r
+ #on KEL2\r
+LOCATE COMP "INP_16" SITE "AP29";\r
+LOCATE COMP "INP_17" SITE "AP33";\r
+LOCATE COMP "INP_18" SITE "AN34";\r
+LOCATE COMP "INP_19" SITE "AP31";\r
+LOCATE COMP "INP_20" SITE "AN32";\r
+LOCATE COMP "INP_21" SITE "AM29";\r
+LOCATE COMP "INP_22" SITE "AL31";\r
+LOCATE COMP "INP_23" SITE "AL30"; \r
+LOCATE COMP "INP_24" SITE "AL34";\r
+LOCATE COMP "INP_25" SITE "AJ31";\r
+LOCATE COMP "INP_26" SITE "AH33";\r
+LOCATE COMP "INP_27" SITE "AL32";\r
+LOCATE COMP "INP_28" SITE "AF32";\r
+LOCATE COMP "INP_29" SITE "AE32";\r
+LOCATE COMP "INP_30" SITE "AE30";\r
+LOCATE COMP "INP_31" SITE "AD26";\r
+DEFINE PORT GROUP "INP_group" "INP*" ;\r
+IOBUF GROUP "INP_group" IO_TYPE=LVDS25 DIFFRESISTOR=100;\r
+\r
+LOCATE COMP "DAC_IN_SDI_5" SITE "P7";\r
+LOCATE COMP "DAC_IN_SDI_6" SITE "M29";\r
+DEFINE PORT GROUP "IN_group" "DAC_IN*" ;\r
+IOBUF GROUP "IN_group" IO_TYPE=LVDS25 DIFFRESISTOR=100;\r
+\r
+\r
+LOCATE COMP "DAC_OUT_SDO_5" SITE "R8";\r
+LOCATE COMP "DAC_OUT_SCK_5" SITE "R2";\r
+LOCATE COMP "DAC_OUT_CS_5" SITE "P9";\r
+LOCATE COMP "DAC_OUT_SDO_6" SITE "AC28";\r
+LOCATE COMP "DAC_OUT_SCK_6" SITE "M34";\r
+LOCATE COMP "DAC_OUT_CS_6" SITE "L28";\r
+DEFINE PORT GROUP "OUT_group" "DAC_OUT*" ;\r
+IOBUF GROUP "OUT_group" IO_TYPE=LVDS25 DIFFRESISTOR=OFF;\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+\r
+#################################################################\r
+# Pin-header IO\r
+#################################################################\r
+LOCATE COMP "HDR_IO_1" SITE "AP28";\r
+LOCATE COMP "HDR_IO_2" SITE "AN28";\r
+LOCATE COMP "HDR_IO_3" SITE "AP27";\r
+LOCATE COMP "HDR_IO_4" SITE "AN27";\r
+LOCATE COMP "HDR_IO_5" SITE "AM27";\r
+LOCATE COMP "HDR_IO_6" SITE "AL27";\r
+LOCATE COMP "HDR_IO_7" SITE "AH26";\r
+LOCATE COMP "HDR_IO_8" SITE "AG26";\r
+LOCATE COMP "HDR_IO_9" SITE "AM28";\r
+LOCATE COMP "HDR_IO_10" SITE "AL28";\r
+DEFINE PORT GROUP "HDR_group" "HDR*" ;\r
+IOBUF GROUP "HDR_group" IO_TYPE=LVCMOS25 PULLMODE=DOWN ;\r
+\r
+#################################################################\r
+# Many LED\r
+#################################################################\r
+LOCATE COMP "LED_RJ_GREEN_0" SITE "C25";\r
+LOCATE COMP "LED_RJ_RED_0" SITE "D25";\r
+LOCATE COMP "LED_GREEN" SITE "D24";\r
+LOCATE COMP "LED_ORANGE" SITE "E24";\r
+LOCATE COMP "LED_RED" SITE "K23";\r
+LOCATE COMP "LED_RJ_GREEN_1" SITE "G26";\r
+LOCATE COMP "LED_RJ_RED_1" SITE "G25";\r
+LOCATE COMP "LED_YELLOW" SITE "K24";\r
+IOBUF PORT "LED_RJ_GREEN_0" IO_TYPE=LVCMOS25 ;\r
+IOBUF PORT "LED_RJ_RED_0" IO_TYPE=LVCMOS25 ;\r
+IOBUF PORT "LED_GREEN" IO_TYPE=LVCMOS25 ;\r
+IOBUF PORT "LED_ORANGE" IO_TYPE=LVCMOS25 ;\r
+IOBUF PORT "LED_RED" IO_TYPE=LVCMOS25 ;\r
+IOBUF PORT "LED_RJ_GREEN_1" IO_TYPE=LVCMOS25 ;\r
+IOBUF PORT "LED_RJ_RED_1" IO_TYPE=LVCMOS25 ;\r
+IOBUF PORT "LED_YELLOW" IO_TYPE=LVCMOS25 ;\r
+\r
+LOCATE COMP "LED_SFP_GREEN_0" SITE "B4";\r
+LOCATE COMP "LED_SFP_GREEN_1" SITE "A6";\r
+LOCATE COMP "LED_SFP_RED_0" SITE "A3";\r
+LOCATE COMP "LED_SFP_RED_1" SITE "A8";\r
+DEFINE PORT GROUP "LED_SFP_group" "LED_SFP*" ;\r
+IOBUF GROUP "LED_SFP_group" IO_TYPE=LVTTL33 ;\r
+\r
+LOCATE COMP "LED_WHITE_0" SITE "A32";\r
+LOCATE COMP "LED_WHITE_1" SITE "A33";\r
+DEFINE PORT GROUP "LED_WHITE_group" "LED_WHITE*" ;\r
+IOBUF GROUP "LED_WHITE_group" IO_TYPE=LVTTL33 ;\r
+\r
+#################################################################\r
+# SFP Control Signals\r
+#################################################################\r
+LOCATE COMP "SFP_LOS_0" SITE "B6";\r
+LOCATE COMP "SFP_LOS_1" SITE "C9";\r
+LOCATE COMP "SFP_MOD0_0" SITE "A5";\r
+LOCATE COMP "SFP_MOD0_1" SITE "K11";\r
+LOCATE COMP "SFP_MOD1_0" SITE "B7";\r
+LOCATE COMP "SFP_MOD1_1" SITE "J11";\r
+LOCATE COMP "SFP_MOD2_0" SITE "A7";\r
+LOCATE COMP "SFP_MOD2_1" SITE "D9";\r
+LOCATE COMP "SFP_TX_DIS_0" SITE "D6";\r
+LOCATE COMP "SFP_TX_DIS_1" SITE "A9";\r
+\r
+DEFINE PORT GROUP "SFP_group" "SFP*" ;\r
+IOBUF GROUP "SFP_group" IO_TYPE=LVTTL33 ;\r
+\r
+\r
+\r
+#################################################################\r
+# Serdes Output Switch\r
+#################################################################\r
+LOCATE COMP "PCSSW_ENSMB" SITE "B3";\r
+LOCATE COMP "PCSSW_EQ_0" SITE "B1";\r
+LOCATE COMP "PCSSW_EQ_1" SITE "B2";\r
+LOCATE COMP "PCSSW_EQ_2" SITE "E4";\r
+LOCATE COMP "PCSSW_EQ_3" SITE "D4";\r
+LOCATE COMP "PCSSW_PE_0" SITE "C3";\r
+LOCATE COMP "PCSSW_PE_1" SITE "C4";\r
+LOCATE COMP "PCSSW_PE_2" SITE "D3";\r
+LOCATE COMP "PCSSW_PE_3" SITE "C2";\r
+LOCATE COMP "PCSSW_1" SITE "D5";\r
+LOCATE COMP "PCSSW_0" SITE "A2";\r
+LOCATE COMP "PCSSW_2" SITE "E13";\r
+LOCATE COMP "PCSSW_3" SITE "F13";\r
+LOCATE COMP "PCSSW_4" SITE "G13";\r
+LOCATE COMP "PCSSW_5" SITE "H14";\r
+LOCATE COMP "PCSSW_6" SITE "A13";\r
+LOCATE COMP "PCSSW_7" SITE "B13";\r
+DEFINE PORT GROUP "PCSSW_group" "PCSSW*" ;\r
+IOBUF GROUP "PCSSW_group" IO_TYPE=LVTTL33 PULLMODE=DOWN ;\r
+\r
+\r
+#################################################################\r
+# ADC\r
+#################################################################\r
+LOCATE COMP "ADC_CLK" SITE "A14"; \r
+LOCATE COMP "ADC_CS" SITE "B14"; \r
+LOCATE COMP "ADC_DIN" SITE "G17"; \r
+LOCATE COMP "ADC_DOUT" SITE "G16"; \r
+IOBUF PORT "ADC_CLK" IO_TYPE=LVTTL33 PULLMODE=UP DRIVE=4 ;\r
+IOBUF PORT "ADC_CS" IO_TYPE=LVTTL33 PULLMODE=UP DRIVE=4 ;\r
+IOBUF PORT "ADC_DIN" IO_TYPE=LVTTL33 PULLMODE=UP DRIVE=4 ;\r
+IOBUF PORT "ADC_DOUT" IO_TYPE=LVTTL33 PULLMODE=UP ;\r
+\r
+#################################################################\r
+# RJ-45 connectors\r
+#################################################################\r
+LOCATE COMP "RJ_IO_0" SITE "R28";\r
+LOCATE COMP "RJ_IO_1" SITE "R31";\r
+LOCATE COMP "RJ_IO_2" SITE "R26";\r
+LOCATE COMP "RJ_IO_3" SITE "R34";\r
+#LOCATE COMP "RJ_IO_1_N" SITE "R27";\r
+#LOCATE COMP "RJ_IO_2_N" SITE "R30";\r
+#LOCATE COMP "RJ_IO_3_N" SITE "R25";\r
+#LOCATE COMP "RJ_IO_4_N" SITE "R33";\r
+IOBUF PORT "RJ_IO_0" IO_TYPE=LVDS25 ;\r
+IOBUF PORT "RJ_IO_1" IO_TYPE=LVDS25 ;\r
+IOBUF PORT "RJ_IO_2" IO_TYPE=LVDS25E ;\r
+IOBUF PORT "RJ_IO_3" IO_TYPE=LVDS25E ;\r
+\r
+\r
+LOCATE COMP "SPARE_IN_0" SITE "K31";\r
+LOCATE COMP "SPARE_IN_1" SITE "R4";\r
+#LOCATE COMP "SPARE_IN0_N" SITE "K32";\r
+#LOCATE COMP "SPARE_IN1_N" SITE "R3";\r
+IOBUF PORT "SPARE_IN_0" IO_TYPE=LVDS25 DIFFRESISTOR=100 ;\r
+IOBUF PORT "SPARE_IN_1" IO_TYPE=LVDS25 DIFFRESISTOR=100 ;\r
+\r
+#################################################################\r
+# Backplane I/O\r
+#################################################################\r
+LOCATE COMP "BACK_GPIO_0" SITE "C26";\r
+LOCATE COMP "BACK_GPIO_1" SITE "D26";\r
+LOCATE COMP "BACK_GPIO_2" SITE "B27";\r
+LOCATE COMP "BACK_GPIO_3" SITE "C27";\r
+LOCATE COMP "BACK_GPIO_4" SITE "D27";\r
+LOCATE COMP "BACK_GPIO_5" SITE "E27";\r
+LOCATE COMP "BACK_GPIO_6" SITE "B28";\r
+LOCATE COMP "BACK_GPIO_7" SITE "A28";\r
+LOCATE COMP "BACK_GPIO_8" SITE "A26";\r
+LOCATE COMP "BACK_GPIO_9" SITE "A27";\r
+LOCATE COMP "BACK_GPIO_10" SITE "A29";\r
+LOCATE COMP "BACK_GPIO_11" SITE "A30";\r
+LOCATE COMP "BACK_GPIO_12" SITE "H26";\r
+LOCATE COMP "BACK_GPIO_13" SITE "H25";\r
+LOCATE COMP "BACK_GPIO_14" SITE "A31";\r
+LOCATE COMP "BACK_GPIO_15" SITE "B31";\r
+DEFINE PORT GROUP "BACK_GPIO_group" "BACK_GPIO*" ;\r
+IOBUF GROUP "BACK_GPIO_group" IO_TYPE=LVCMOS25 PULLMODE=UP;\r
+\r
+LOCATE COMP "BACK_LVDS_0" SITE "V2";\r
+LOCATE COMP "BACK_LVDS_1" SITE "T4";\r
+# LOCATE COMP "BACK_LVDS_0_N" SITE "V1";\r
+# LOCATE COMP "BACK_LVDS_1_N" SITE "T3";\r
+DEFINE PORT GROUP "BACK_LVDS_group" "BACK_LVDS*" ;\r
+IOBUF GROUP "BACK_LVDS_group" IO_TYPE=LVDS25;\r
+\r
+\r
+#################################################################\r
+# Flash ROM and Reboot\r
+#################################################################\r
+LOCATE COMP "FLASH_CLK" SITE "F34"; #was "SPI_CLK"\r
+LOCATE COMP "FLASH_CS" SITE "D34"; #was "SPI_CS" \r
+LOCATE COMP "FLASH_IN" SITE "F33"; #was "SPI_IN" \r
+LOCATE COMP "FLASH_OUT" SITE "F32"; #was "SPI_OUT"\r
+LOCATE COMP "PROGRAMN" SITE "C31";\r
+\r
+DEFINE PORT GROUP "FLASH_group" "FLASH*" ;\r
+IOBUF GROUP "FLASH_group" IO_TYPE=LVTTL33 PULLMODE=NONE;\r
+IOBUF PORT "PROGRAMN" IO_TYPE=LVTTL33 PULLMODE=UP DRIVE=8 ;\r
+\r
+LOCATE COMP "ENPIRION_CLOCK" SITE "H23";\r
+IOBUF PORT "ENPIRION_CLOCK" IO_TYPE=LVCMOS25 PULLMODE=UP DRIVE=8 ;\r
+\r
+\r
+#################################################################\r
+# Misc\r
+#################################################################\r
+LOCATE COMP "TEMPSENS" SITE "J13"; #was TEMP_OWB\r
+IOBUF PORT "TEMPSENS" IO_TYPE=LVTTL33 PULLMODE=UP DRIVE=8 ;\r
+\r
+\r
+#################################################################\r
+# Test I/O\r
+#################################################################\r
+LOCATE COMP "TEST_LINE_0" SITE "A19";\r
+LOCATE COMP "TEST_LINE_1" SITE "B19";\r
+LOCATE COMP "TEST_LINE_2" SITE "K20";\r
+LOCATE COMP "TEST_LINE_3" SITE "L19";\r
+LOCATE COMP "TEST_LINE_4" SITE "C19";\r
+LOCATE COMP "TEST_LINE_5" SITE "D19";\r
+LOCATE COMP "TEST_LINE_6" SITE "J19";\r
+LOCATE COMP "TEST_LINE_7" SITE "K19";\r
+LOCATE COMP "TEST_LINE_8" SITE "A20";\r
+LOCATE COMP "TEST_LINE_9" SITE "B20";\r
+LOCATE COMP "TEST_LINE_10" SITE "G20";\r
+LOCATE COMP "TEST_LINE_11" SITE "G21";\r
+LOCATE COMP "TEST_LINE_12" SITE "C20";\r
+LOCATE COMP "TEST_LINE_13" SITE "D20";\r
+LOCATE COMP "TEST_LINE_14" SITE "F21";\r
+LOCATE COMP "TEST_LINE_15" SITE "F22";\r
+DEFINE PORT GROUP "TEST_LINE_group" "TEST_LINE*" ;\r
+IOBUF GROUP "TEST_LINE_group" IO_TYPE=LVCMOS25 PULLMODE=DOWN DRIVE=8;\r
jspc29 / trb3sc.git / commitdiff