}
###############################################################################
-#get the correct power channel for board with (address).
+#get the correct power output for MBO with (address).
#returns (hostname,board,output)
###############################################################################
-sub get_power_channel {
+sub get_power_output {
my $addr = shift @_;
my ($p,$s,$b,$e) = get_position($addr);
my $id=-1;
--- /dev/null
+package MDCPower;
+
+use warnings;
+no warnings "portable";
+use FileHandle;
+use Data::Dumper;
+use lib '.';
+use MDC;
+
+
+
+
+###############################################################################
+#set the voltage for a given board and channel.
+#specify if setting should be saved to config file
+###############################################################################
+sub set_voltage {
+ my ($addr,$channel,$setting,$save) = @_;
+ return -1 unless $addr >= 0x8e00 && $addr <= 0x8fff
+ && $channel >= 0 && $channel <= 1
+ && $setting >= 0 && $setting <= 7;
+
+
+ my ($host,$board,$outp) = MDC::get_power_output($addr);
+ return -2 unless defined $host && $board >= 0 && $outp >= 0;
+
+ system("./mdc_powerboard.pl -d $host -b $board -o $outp -c $channel -r adjust -v $setting");
+
+ store_voltage($addr,$channel,$setting) if $save;
+ return 1;
+ }
+
+
+###############################################################################
+#saves the voltage for a given board and channel
+###############################################################################
+sub store_voltage {
+ my ($addr,$channel,$setting) = @_;
+ }
+
+###############################################################################
+#get the voltage setting for a given board (from file)
+#returns (channel1, channel2)
+###############################################################################
+sub get_voltage {
+ my ($addr) = @_;
+ my $v1 = -1;
+ my $v2 = -1;
+
+ open FILE, "../settings_power/settings_voltage.db" or die $!."\nsettings_voltage.db not found.";
+ while (my $a = <FILE>) {
+ if(my @values = $a =~ /^\s*0x(\w\w\w\w)\s+(\d)\s+(\d)/) {
+ my $board = $values[0];
+ if (hex($board) == $addr) {
+ $v1 = $values[1];
+ $v2 = $values[2];
+ last;
+ }
+ }
+ }
+ close FILE;
+ return ($v1,$v2);
+ }
+
+###############################################################################
+#switch on/off a specified board
+#onoff=2 does a quick power cycle
+###############################################################################
+sub power_switch {
+ my ($addr,$onoff) = @_;
+
+ my ($host,$board,$outp) = MDC::get_power_output($addr);
+ return -1 unless defined $host && $board >= 0 && $outp >= 0;
+
+
+ system("./mdc_powerboard.pl -d $host -b $board -o $outp -r switch -v 0") if($onoff == 0 || $onoff == 2);
+ sleep(1) if($onoff == 2);
+ system("./mdc_powerboard.pl -d $host -b $board -o $outp -r switch -v 1") if($onoff == 1 || $onoff == 2);
+ return 1;
+ }
+
+
+1;
#Scripts#
+* `generate_address_list.pl` takes the list of installed MBO serial numbers and generates the address.db file for DAQ
+* `generate_address_settings.pl` makes the files needed to automatically set the board addresses from Flash ROM
* `generate_pasttrec_settings.pl` prepares data from common baseline database
* loads settings to FPGA directly
* writes trbcmd files for later writing to Flash ROM
* settings are written for boards currently in the system (otherwise serial number / uid can't be matched to addresses)
* default PASTTREC registers are currently hardcoded (!)
-
* `merge_and_flash_settings.pl` generates and loads settings from the 'settings' directory to the FPGAs flashes
-
-* `generate_address_settings.pl` makes the files needed to automatically set the board addresses from Flash ROM
-
* `pasttrec_set_threshold.pl` sets an identical threshold to all Pasttrec (temporarily)
-
* `pasttrec_baseline_finder.pl` basic baseline finder script
-* `generate_address_list.pl` takes the list of installed MBO serial numbers and generates the address.db file for DAQ
+#Packages#
+
+* `MDC.pm` Library with common functions, like address lookup
+* `MDCPower.pm` Library with common functions related to power setting and switching
-##Notes##
-All scripts assume that the daqtool repository is available next to this repository.
+#Notes#
+All scripts assume that the daqtools repository is available next to this repository.
#Board address used here is the TrbNet address of OEP (the same as for ADC readings)
#Position in the detector and channel on power board can be calculated from this
+#using MDC::get_power_channel()
#Voltages are set between 0 and 7
+#This file can be edited, but is changed by scripts as well.
# Address # Voltage 1 # Voltage 2
########################################
+ 0x8e00 2 2
+ 0x8e01 2 2
+ 0x8e02 2 2
+ 0x8e03 2 2
+ 0x8e04 2 2
+ 0x8e05 2 2
+ 0x8e06 2 2
+ 0x8e07 2 2
+ 0x8e08 2 2
+ 0x8e09 2 2
+ 0x8e0a 2 2
+ 0x8e0b 2 2
+ 0x8e0c 2 2
+ 0x8e0d 2 2
+ 0x8e10 2 2
+ 0x8e11 2 2
+ 0x8e12 2 2
+ 0x8e13 2 2
+ 0x8e14 2 2
+ 0x8e15 2 2
+ 0x8e16 2 2
+ 0x8e17 2 2
+ 0x8e18 2 2
+ 0x8e19 2 2
+ 0x8e1a 2 2
+ 0x8e1b 2 2
+ 0x8e1c 2 2
+ 0x8e1d 2 2
+ 0x8e20 2 2
+ 0x8e21 2 2
+ 0x8e22 2 2
+ 0x8e23 2 2
+ 0x8e24 2 2
+ 0x8e25 2 2
+ 0x8e26 2 2
+ 0x8e27 2 2
+ 0x8e28 2 2
+ 0x8e29 2 2
+ 0x8e2a 2 2
+ 0x8e2b 2 2
+ 0x8e2c 2 2
+ 0x8e2d 2 2
+ 0x8e30 2 2
+ 0x8e31 2 2
+ 0x8e32 2 2
+ 0x8e33 2 2
+ 0x8e34 2 2
+ 0x8e35 2 2
+ 0x8e36 2 2
+ 0x8e37 2 2
+ 0x8e38 2 2
+ 0x8e39 2 2
+ 0x8e3a 2 2
+ 0x8e3b 2 2
+ 0x8e3c 2 2
+ 0x8e3d 2 2
+ 0x8e40 2 2
+ 0x8e41 2 2
+ 0x8e42 2 2
+ 0x8e43 2 2
+ 0x8e44 2 2
+ 0x8e45 2 2
+ 0x8e46 2 2
+ 0x8e47 2 2
+ 0x8e48 2 2
+ 0x8e49 2 2
+ 0x8e4a 2 2
+ 0x8e4b 2 2
+ 0x8e4c 2 2
+ 0x8e4d 2 2
+ 0x8e50 2 2
+ 0x8e51 2 2
+ 0x8e52 2 2
+ 0x8e53 2 2
+ 0x8e54 2 2
+ 0x8e55 2 2
+ 0x8e56 2 2
+ 0x8e57 2 2
+ 0x8e58 2 2
+ 0x8e59 2 2
+ 0x8e5a 2 2
+ 0x8e5b 2 2
+ 0x8e5c 2 2
+ 0x8e5d 2 2
+ 0x8e60 2 2
+ 0x8e61 2 2
+ 0x8e62 2 2
+ 0x8e63 2 2
+ 0x8e64 2 2
+ 0x8e65 2 2
+ 0x8e66 2 2
+ 0x8e67 2 2
+ 0x8e68 2 2
+ 0x8e69 2 2
+ 0x8e6a 2 2
+ 0x8e6b 2 2
+ 0x8e6c 2 2
+ 0x8e6d 2 2
+ 0x8e6e 2 2
+ 0x8e6f 2 2
+ 0x8e70 2 2
+ 0x8e71 2 2
+ 0x8e72 2 2
+ 0x8e73 2 2
+ 0x8e74 2 2
+ 0x8e75 2 2
+ 0x8e76 2 2
+ 0x8e77 2 2
+ 0x8e78 2 2
+ 0x8e79 2 2
+ 0x8e7a 2 2
+ 0x8e7b 2 2
+ 0x8e7c 2 2
+ 0x8e7d 2 2
+ 0x8e7e 2 2
+ 0x8e7f 2 2
+ 0x8e80 2 2
+ 0x8e81 2 2
+ 0x8e82 2 2
+ 0x8e83 2 2
+ 0x8e84 2 2
+ 0x8e85 2 2
+ 0x8e86 2 2
+ 0x8e87 2 2
+ 0x8e88 2 2
+ 0x8e89 2 2
+ 0x8e8a 2 2
+ 0x8e8b 2 2
+ 0x8e8c 2 2
+ 0x8e8d 2 2
+ 0x8e8e 2 2
+ 0x8e8f 2 2
+ 0x8e90 2 2
+ 0x8e91 2 2
+ 0x8e92 2 2
+ 0x8e93 2 2
+ 0x8e94 2 2
+ 0x8e95 2 2
+ 0x8e96 2 2
+ 0x8e97 2 2
+ 0x8e98 2 2
+ 0x8e99 2 2
+ 0x8e9a 2 2
+ 0x8e9b 2 2
+ 0x8e9c 2 2
+ 0x8e9d 2 2
+ 0x8e9e 2 2
+ 0x8e9f 2 2
+ 0x8ea0 2 2
+ 0x8ea1 2 2
+ 0x8ea2 2 2
+ 0x8ea3 2 2
+ 0x8ea4 2 2
+ 0x8ea5 2 2
+ 0x8ea6 2 2
+ 0x8ea7 2 2
+ 0x8ea8 2 2
+ 0x8ea9 2 2
+ 0x8eaa 2 2
+ 0x8eab 2 2
+ 0x8eac 2 2
+ 0x8ead 2 2
+ 0x8eae 2 2
+ 0x8eaf 2 2
+ 0x8eb0 2 2
+ 0x8eb1 2 2
+ 0x8eb2 2 2
+ 0x8eb3 2 2
+ 0x8eb4 2 2
+ 0x8eb5 2 2
+ 0x8eb6 2 2
+ 0x8eb7 2 2
+ 0x8eb8 2 2
+ 0x8eb9 2 2
+ 0x8eba 2 2
+ 0x8ebb 2 2
+ 0x8ebc 2 2
+ 0x8ebd 2 2
+ 0x8ebe 2 2
+ 0x8ebf 2 2
+ 0x8f00 2 2
+ 0x8f01 2 2
+ 0x8f02 2 2
+ 0x8f03 2 2
+ 0x8f04 2 2
+ 0x8f05 2 2
+ 0x8f06 2 2
+ 0x8f07 2 2
+ 0x8f08 2 2
+ 0x8f09 2 2
+ 0x8f0a 2 2
+ 0x8f0b 2 2
+ 0x8f0c 2 2
+ 0x8f0d 2 2
+ 0x8f0e 2 2
+ 0x8f0f 2 2
+ 0x8f10 2 2
+ 0x8f11 2 2
+ 0x8f12 2 2
+ 0x8f13 2 2
+ 0x8f14 2 2
+ 0x8f15 2 2
+ 0x8f16 2 2
+ 0x8f17 2 2
+ 0x8f18 2 2
+ 0x8f19 2 2
+ 0x8f1a 2 2
+ 0x8f1b 2 2
+ 0x8f1c 2 2
+ 0x8f1d 2 2
+ 0x8f1e 2 2
+ 0x8f1f 2 2
+ 0x8f20 2 2
+ 0x8f21 2 2
+ 0x8f22 2 2
+ 0x8f23 2 2
+ 0x8f24 2 2
+ 0x8f25 2 2
+ 0x8f26 2 2
+ 0x8f27 2 2
+ 0x8f28 2 2
+ 0x8f29 2 2
+ 0x8f2a 2 2
+ 0x8f2b 2 2
+ 0x8f2c 2 2
+ 0x8f2d 2 2
+ 0x8f2e 2 2
+ 0x8f2f 2 2
+ 0x8f30 2 2
+ 0x8f31 2 2
+ 0x8f32 2 2
+ 0x8f33 2 2
+ 0x8f34 2 2
+ 0x8f35 2 2
+ 0x8f36 2 2
+ 0x8f37 2 2
+ 0x8f38 2 2
+ 0x8f39 2 2
+ 0x8f3a 2 2
+ 0x8f3b 2 2
+ 0x8f3c 2 2
+ 0x8f3d 2 2
+ 0x8f3e 2 2
+ 0x8f3f 2 2
+ 0x8f40 2 2
+ 0x8f41 2 2
+ 0x8f42 2 2
+ 0x8f43 2 2
+ 0x8f44 2 2
+ 0x8f45 2 2
+ 0x8f46 2 2
+ 0x8f47 2 2
+ 0x8f48 2 2
+ 0x8f49 2 2
+ 0x8f4a 2 2
+ 0x8f4b 2 2
+ 0x8f4c 2 2
+ 0x8f4d 2 2
+ 0x8f4e 2 2
+ 0x8f4f 2 2
+ 0x8f50 2 2
+ 0x8f51 2 2
+ 0x8f52 2 2
+ 0x8f53 2 2
+ 0x8f54 2 2
+ 0x8f55 2 2
+ 0x8f56 2 2
+ 0x8f57 2 2
+ 0x8f58 2 2
+ 0x8f59 2 2
+ 0x8f5a 2 2
+ 0x8f5b 2 2
+ 0x8f5c 2 2
+ 0x8f5d 2 2
+ 0x8f5e 2 2
+ 0x8f5f 2 2
+ 0x8f60 2 2
+ 0x8f61 2 2
+ 0x8f62 2 2
+ 0x8f63 2 2
+ 0x8f64 2 2
+ 0x8f65 2 2
+ 0x8f66 2 2
+ 0x8f67 2 2
+ 0x8f68 2 2
+ 0x8f69 2 2
+ 0x8f6a 2 2
+ 0x8f6b 2 2
+ 0x8f6c 2 2
+ 0x8f6d 2 2
+ 0x8f6e 2 2
+ 0x8f6f 2 2
+ 0x8f70 2 2
+ 0x8f71 2 2
+ 0x8f72 2 2
+ 0x8f73 2 2
+ 0x8f74 2 2
+ 0x8f75 2 2
+ 0x8f76 2 2
+ 0x8f77 2 2
+ 0x8f78 2 2
+ 0x8f79 2 2
+ 0x8f7a 2 2
+ 0x8f7b 2 2
+ 0x8f7c 2 2
+ 0x8f7d 2 2
+ 0x8f7e 2 2
+ 0x8f7f 2 2
+ 0x8f80 2 2
+ 0x8f81 2 2
+ 0x8f82 2 2
+ 0x8f83 2 2
+ 0x8f84 2 2
+ 0x8f85 2 2
+ 0x8f86 2 2
+ 0x8f87 2 2
+ 0x8f88 2 2
+ 0x8f89 2 2
+ 0x8f8a 2 2
+ 0x8f8b 2 2
+ 0x8f8c 2 2
+ 0x8f8d 2 2
+ 0x8f8e 2 2
+ 0x8f8f 2 2
+ 0x8f90 2 2
+ 0x8f91 2 2
+ 0x8f92 2 2
+ 0x8f93 2 2
+ 0x8f94 2 2
+ 0x8f95 2 2
+ 0x8f96 2 2
+ 0x8f97 2 2
+ 0x8f98 2 2
+ 0x8f99 2 2
+ 0x8f9a 2 2
+ 0x8f9b 2 2
+ 0x8f9c 2 2
+ 0x8f9d 2 2
+ 0x8f9e 2 2
+ 0x8f9f 2 2
+ 0x8fa0 2 2
+ 0x8fa1 2 2
+ 0x8fa2 2 2
+ 0x8fa3 2 2
+ 0x8fa4 2 2
+ 0x8fa5 2 2
+ 0x8fa6 2 2
+ 0x8fa7 2 2
+ 0x8fa8 2 2
+ 0x8fa9 2 2
+ 0x8faa 2 2
+ 0x8fab 2 2
+ 0x8fac 2 2
+ 0x8fad 2 2
+ 0x8fae 2 2
+ 0x8faf 2 2
+ 0x8fb0 2 2
+ 0x8fb1 2 2
+ 0x8fb2 2 2
+ 0x8fb3 2 2
+ 0x8fb4 2 2
+ 0x8fb5 2 2
+ 0x8fb6 2 2
+ 0x8fb7 2 2
+ 0x8fb8 2 2
+ 0x8fb9 2 2
+ 0x8fba 2 2
+ 0x8fbb 2 2
+ 0x8fbc 2 2
+ 0x8fbd 2 2
+ 0x8fbe 2 2
+ 0x8fbf 2 2
jspc29 / hades_mdc_settings.git / commitdiff