Added Mainz A2 user directory (with current setup.sh)

diff --git a/users/mainz_kph_a2/setup.sh b/users/mainz_kph_a2/setup.sh
new file mode 100755 (executable)
index 0000000..428fd3e
--- /dev/null
+++ b/users/mainz_kph_a2/setup.sh
@@ -0,0 +1,75 @@
+#!/bin/sh
+export PATH=${HOME}/trbsoft/daqdata/bin:${HOME}/trbsoft/trbnettools/binlocal:${PATH}
+export TRB3_SERVER=trb019
+export DAQOPSERVER=localhost:0
+
+pgrep  dnsmasq > /dev/null
+if [[ $? != 0 ]]; then
+    echo "No DHCP server found, skipping setup (but exports done)."
+               return
+fi
+
+pgrep trbnetd > /dev/null
+if [[ $? = 0 ]]; then
+    echo "trbnetd already running, skipping setup (but exports done)."
+    return
+fi
+trbnetd
+
+
+##### TRBNET #####
+# set the TRBNet addresses of the Endpoints
+trbcmd s 0x9100000337edaa28 0 0x0200
+trbcmd s 0x1900000337dff228 1 0x0201
+trbcmd s 0xf700000337df5428 2 0x0202
+trbcmd s 0xe300000337def328 3 0x0203
+trbcmd s 0xe100000337dff928 5 0x8000
+
+##### Ethernet and UDP #######
+trbcmd w 0x8000 0x8300 0x8000
+trbcmd w 0x8000 0x8301 0x00020001
+trbcmd w 0x8000 0x8302 0x00030062
+trbcmd w 0x8000 0x8303 0xea60
+trbcmd w 0x8000 0x8304 0x2260
+trbcmd w 0x8000 0x8305 0x1
+trbcmd w 0x8000 0x8306 0x0
+trbcmd w 0x8000 0x8307 0x0
+trbcmd w 0x8000 0x8308 0xffffff
+trbcmd w 0x8000 0x830b 0x7
+trbcmd w 0x8000 0x830d 0x0
+
+#mac address of the EB
+# 14:fe:b5:ec:10:9a
+trbcmd w 0x8000 0x8100 0xb5ec109a # lower 4 bytes
+trbcmd w 0x8000 0x8101 0x14fe #upper byte
+
+# destination port and source IP and so on
+trbcmd w 0x8000 0x8102 0xc0a80101
+trbcmd w 0x8000 0x8103 0xc350
+trbcmd w 0x8000 0x8104 0xdead8001
+trbcmd w 0x8000 0x8105 0x0230
+trbcmd w 0x8000 0x8106 0xc0a80072
+trbcmd w 0x8000 0x8107 0xc350
+trbcmd w 0x8000 0x8108 0x0578
+
+
+#####  TDC  #######
+trbcmd w 0x0200 0xc800 0x00000001 ## logic analyser control register
+trbcmd w 0x0200 0xc801 0x000f0005 ## trigger window enable & trigger window width
+trbcmd w 0x0200 0xc802 0x00000000 ## channel 01-31 enable
+trbcmd w 0x0200 0xc803 0x00000000 ## channel 32-63 enable
+
+#trbcmd w 0x0200 0xc2 0x0000ffff ## channel 01-31 enable
+
+#trbcmd w 0x8000 0xc0 0x00000001      # logic analyser control register
+#trbcmd w 0x8000 0xc1 0x000f0005      # trigger window enable & trigger window width (off if MSB not set)
+#trbcmd w 0x8000 0xc2 0x00000000      # channel 32- 1 enable (0 is reference time and always on)
+#trbcmd w 0x8000 0xc3 0x00000000      # channel 64-33 enable
+
+
+
+#####  CTS  #######
+trbcmd w 0x8000 0xa137 0xfffff  #set CTS pulser to 100Hz
+trbcmd setbit 0x8000 0xa101 0x2 #enable pulser channel 0
+
+echo "Successfully setup TRB network"