updated gbe registers in trb3doc

diff --git a/trb3/GbeDataReadout.tex b/trb3/GbeDataReadout.tex
index 16dfd44f84ec5460ab57b559f8334a4ce067f91d..91ad40f05bd57f870b1f0dda5f92328ffa3f73d0 100644 (file)
--- a/trb3/GbeDataReadout.tex
+++ b/trb3/GbeDataReadout.tex
@@ -32,17 +32,17 @@ Each TRB3 board has a unique MAC address which is constructed in following way:
 \begin{center}\r
        \begin{tabular}{|l|l|l|}\r
        \hline\r
-       Address & Name & Description \\ \hline\r
-\r
-       0x81X0 & DestMacLsb  & Lower 32 bits of the destination MAC address  \\\r
-       0x81X1 & DestMacMsb  & Bit 15..0: Higher 16 bit of the destination MAC, Bit 31..16: reserved\\\r
-       0x81X2 & DestIP      & Destination IP \\\r
-       0x81X3 & DestUdpPort & Bit 15..0: Destination UDP port, Bit 31..16: reserved \\\r
-       0x81X4 & SrcMacLsb   & OBSOLETE (address automatically generated) \\\r
-       0x81X5 & SrcMacMsb   & OBSOLETE (address automatically generated) \\\r
-       0x81X6 & SrcIP       & OBSOLETE (address aacquired from DHCP) \\\r
-       0x81X7 & SrcUdpPort  & Bit 15..0: Source UDP port, Bit 31..16: reserved \\\r
-       0x81X8 & MtuSize     & OBSOLETE (switched to control register 0x8304) \\\r
+       Address & Description \\ \hline\r
+\r
+       0x81X0 & Lower 32 bits of the destination MAC address  \\\r
+       0x81X1 & Bit 15..0: Higher 16 bit of the destination MAC, Bit 31..16: reserved\\\r
+       0x81X2 & Destination IP \\\r
+       0x81X3 & Bit 15..0: Destination UDP port, Bit 31..16: reserved \\\r
+       0x81X4 & OBSOLETE (address automatically generated) \\\r
+       0x81X5 & OBSOLETE (address automatically generated) \\\r
+       0x81X6 & OBSOLETE (address aacquired from DHCP) \\\r
+       0x81X7 & Bit 15..0: Source UDP port, Bit 31..16: reserved \\\r
+       0x81X8 & OBSOLETE (switched to control register 0x8304) \\ \hline\r
        \end{tabular}\r
        \caption[Addressing registers map]{Addressing registers map}\r
 \end{center}\r
@@ -56,24 +56,24 @@ Some header values as well as operation mechanics can be changed and adjusted, h
 \r
 \begin{table}[!htbp]\r
 \begin{center}\r
-       \begin{tabular}{|l|l|l|}\r
+       \begin{tabular}{|l|l|}\r
        \hline\r
-       Address & Name & Description\\ \hline\r
-\r
-       0x8300 & SubEventID    & The ID is written in each SubEventHeader to identify the source of data (default: x000000cf) \\\r
-       0x8301 & SubEventDecoding & Information sent in the SubEventHeader (default: x00020001) \\\r
-       0x8302 & QueueDecoding    & Information sent in the HadesTuQueue (default: x00030062) \\\r
-       0x8304 & MaxFrameSize     & Maximum size of a Ethernet packet (default: 1400) \\\r
-       0x8305 & UseGbE           & Enable sending data over GbE (default: 0) \\\r
-       0x8307 & MultiEventQueue  & Enable packing several events into one event queue (default: 0) \\\r
-       0x8308 & TriggerCounter   & The internal, 24bit trigger counter used for the SubEventHeader (default: 0) \\\r
-       0x8309 & EnableRX         & Enables/disables reception of frames (default: 1)\\\r
-       0x830B & IncludeTType     & Include Trigger Type in decoding field (default: 0)\\\r
-       0x830C & MaxSubSize       & Max Subevent size, larger are discarded (default: 59800)\\\r
-       0x830E & MaxSubsInQueue   & Max number of Subevents in one Queue (default: 200)\\\r
-       0x830F & MaxSubSizeInQ    & Max Subevent size, after which the Queue is closed immediately (default: 32000)\\\r
-       0x8310 & MaxQueueSize     & Max size of a Queue (default: 60000) \\\r
-       0x83FF & ResetDefault     & When written to 0xFFFFFFFF: all values are reset to default \\\r
+       Address & Description\\ \hline\r
+\r
+       0x8300  & The ID is written in each SubEventHeader to identify the source of data (default: x000000cf) \\\r
+       0x8301  & Information sent in the SubEventHeader (default: x00020001) \\\r
+       0x8302  & Information sent in the HadesTuQueue (default: x00030062) \\\r
+       0x8304  & Maximum size of a Ethernet packet (default: 1400) \\\r
+       0x8305  & Enable sending data over GbE (default: 0) \\\r
+       0x8307  & Enable packing several events into one event queue (default: 0) \\\r
+       0x8308  & The internal, 24bit trigger counter used for the SubEventHeader (default: 0) \\\r
+       0x8309  & Enables/disables reception of frames (default: 1)\\\r
+       0x830B  & Include Trigger Type in decoding field (default: 0)\\\r
+       0x830C  & Max Subevent size, larger are discarded (default: 59800)\\\r
+       0x830E  & Max number of Subevents in one Queue (default: 200)\\\r
+       0x830F  & Max Subevent size, after which the Queue is closed immediately (default: 32000)\\\r
+       0x8310  & Max size of a Queue (default: 60000) \\\r
+       0x83FF  & When written to 0xFFFFFFFF: all values are reset to default \\ \hline\r
 \r
        \end{tabular}\r
        \caption[Control registers map]{Control registers map}\r
@@ -90,13 +90,13 @@ The operation of the entire GbE module as well as individual protocols can be mo
 \begin{center}\r
        \begin{tabular}{|l|l|l|}\r
        \hline\r
-       Address & Name & Description\\ \hline\r
-       0x83E0 & RxBytes    & Received bytes counter \\\r
-       0x83E1 & RxFrames   & Received frames counter \\\r
-       0x83E2 & TxBytes    & Transmitted bytes counter \\\r
-       0x83E3 & TxFrames   & Transmitted frames counter \\\r
-       0x83E4 & TxPackets  & Transmitted packets counter \\\r
-       0x83E5 & RxDropped  & Dropped RX frames counter \\\r
+       Address & Description\\ \hline\r
+       0x83E0  & Received bytes counter \\\r
+       0x83E1  & Received frames counter \\\r
+       0x83E2  & Transmitted bytes counter \\\r
+       0x83E3  & Transmitted frames counter \\\r
+       0x83E4  & Transmitted packets counter \\\r
+       0x83E5  & Dropped RX frames counter \\ \hline\r
        \end{tabular}\r
        \caption[Monitoring registers map]{Monitoring registers map}\r
 \end{center}\r