--- /dev/null
+library ieee;
+USE IEEE.std_logic_1164.ALL;
+use ieee.numeric_std.all;
+use work.trb_net_std.all;
+
+package config is
+------------------------------------------------------------------------------
+--Begin of configuration
+------------------------------------------------------------------------------
+
+ constant INCLUDE_CTS : integer range c_NO to c_YES := c_YES;
+ constant INCLUDE_CBMNET : integer range c_NO to c_YES := c_NO;
+ constant INCLUDE_MBS_MASTER : integer range c_NO to c_YES := c_NO;
+ constant INCLUDE_TIMESTAMP_GENERATOR : integer := c_NO;
+
+--include TDC for all four trigger input lines
+
+ constant INCLUDE_TDC : integer range c_NO to c_YES := c_NO;
+ constant TDC_CHANNEL_NUMBER : integer := 5;
+ constant DOUBLE_EDGE_TYPE : integer range 0 to 3 := 0; --double edge type: 0, 1, 2, 3
+ -- 0: single edge only,
+ -- 1: same channel,
+ -- 2: alternating channels,
+ -- 3: same channel with stretcher
+ constant RING_BUFFER_SIZE : integer range 0 to 7 := 7; --ring buffer size: 0, 1, 2, 3, 7
+ --ring buffer size: 32,64,96,128,dyn
+-- Include SFP power readout
+ constant INCLUDE_SFP_DDM : integer range c_NO to c_YES := c_NO;
+
+--use all four SFP (1-4) as downlink to other boards (only w/o CBMNET)
+ constant USE_4_SFP : integer range c_NO to c_YES := c_NO;
+
+
+--Run wih 125 MHz instead of 100 MHz
+ constant USE_125_MHZ : integer range c_NO to c_YES := c_NO;
+
+--Run external 200 MHz clock source
+ constant USE_EXTERNAL_CLOCK : integer range c_NO to c_YES := c_YES;
+
+--Which external trigger module (ETM) to use?
+ constant INCLUDE_ETM : integer range c_NO to c_YES := c_NO;
+ type ETM_CHOICE_type is (ETM_CHOICE_MBS_VULOM, ETM_CHOICE_MAINZ_A2, ETM_CHOICE_CBMNET, ETM_CHOICE_M26);
+ constant ETM_CHOICE : ETM_CHOICE_type := ETM_CHOICE_MBS_VULOM;
+
+ constant ETM_ID : std_logic_vector(7 downto 0);
+
+--output busy signal on pair 4 of Trigger RJ45?
+ constant GEN_BUSY_OUTPUT : integer := c_YES;
+
+ constant TRIGGER_COIN_COUNT : integer := 2;
+ constant TRIGGER_PULSER_COUNT : integer := 2;
+ constant TRIGGER_RAND_PULSER : integer := 1;
+ constant TRIGGER_ADDON_COUNT : integer := 6;
+ constant PERIPH_TRIGGER_COUNT : integer := 4;
+
+------------------------------------------------------------------------------
+--End of configuration
+------------------------------------------------------------------------------
+
+--Ports:
+-- LVL1/IPU SCtrl
+-- 0 FPGA 1 FPGA 1
+-- 1 FPGA 2 FPGA 2
+-- 2 FPGA 3 FPGA 3
+-- 3 FPGA 4 FPGA 4
+-- 4 opt. link opt. link
+-- 5-7 SFP 2-4
+-- 5(8) CTS read-out internal 0 1 - X X O --downlink only
+-- 6(9) CTS TRG Sctrl GbE 2 3 4 X X X --uplink only
+
+------------------------------------------------------------------------------
+--Hub configuration
+------------------------------------------------------------------------------
+ type hub_mii_t is array(0 to 1) of integer;
+ type hub_ct is array(0 to 16) of integer;
+ type hub_cfg_t is array(0 to 1) of hub_ct;
+ type hw_info_t is array(0 to 1) of std_logic_vector(31 downto 0);
+
+ --this is used to select the proper configuration in the main code
+ constant CFG_MODE : integer;
+
+
+ --first entry is normal CTS with one optical output, second one is with four optical outputs
+ --slow-control is accepted on SFP1 only, triggers are sent to all used SFP
+ constant INTERNAL_NUM_ARR : hub_mii_t := (5,5);
+ constant INTERFACE_NUM_ARR : hub_mii_t := (5,8);
+-- 0 1 2 3 4 5 6 7 8 9 a b c d e f
+ constant IS_UPLINK_ARR : hub_cfg_t := ((0,0,0,0,1,0,1,0,0,0,0,0,0,0,0,0,0),
+ (0,0,0,0,1,0,0,0,0,1,0,0,0,0,0,0,0));
+ constant IS_DOWNLINK_ARR : hub_cfg_t := ((1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0),
+ (1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0));
+ constant IS_UPLINK_ONLY_ARR : hub_cfg_t := ((0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0),
+ (0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0));
+ constant HARDWARE_INFO_ARR : hw_info_t := (x"9000CEE0",x"9000CEE2");
+
+ constant INTERNAL_NUM : integer;
+ constant INTERFACE_NUM : integer;
+ constant IS_UPLINK : hub_ct;
+ constant IS_DOWNLINK : hub_ct;
+ constant IS_UPLINK_ONLY : hub_ct;
+ constant HARDWARE_INFO : std_logic_vector(31 downto 0);
+
+ -- MII_NUMBER => 5, --(8)
+ -- INT_NUMBER => 5,
+ -- INT_CHANNELS => (0,1,0,1,3),
+
+ -- No trigger / sctrl sent to optical link, slow control receiving possible
+ -- MII_IS_UPLINK => (0,0,0,0,1,0,1,0,0,0,0,0,0,0,0,0,0);
+ -- MII_IS_DOWNLINK => (1,1,1,1,0,1,0,0,0,0,0,0,0,0,0,0,0);
+ -- MII_IS_UPLINK_ONLY => (0,0,0,0,1,0,1,0,0,0,0,0,0,0,0,0,0);
+
+ -- Trigger / sctrl sent to optical link, slow control receiving possible
+ -- MII_IS_UPLINK => (0,0,0,0,1,0,1,0,0,0,0,0,0,0,0,0,0);
+ -- MII_IS_DOWNLINK => (1,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0);
+ -- MII_IS_UPLINK_ONLY => (0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0);
+ -- & disable port 4 in c0 and c1 -- no triggers from/to optical link
+
+ -- Trigger / sctrl sent to 4 optical links
+ -- MII_IS_UPLINK => (0,0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,0);
+ -- MII_IS_DOWNLINK => (1,1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0);
+ -- MII_IS_UPLINK_ONLY => (0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0);
+ -- & disable port 4 in c0 and c1 -- no triggers from/to optical link
+
+------------------------------------------------------------------------------
+--CTS configuration
+------------------------------------------------------------------------------
+ constant cts_rdo_additional_ports : integer;
+
+end;
+
+package body config is
+--compute correct configuration mode
+ constant CFG_MODE : integer := USE_4_SFP;
+ constant cts_rdo_additional_ports : integer := 1 + INCLUDE_TDC + INCLUDE_CBMNET;
+
+ constant HARDWARE_INFO : std_logic_vector (31 downto 0) := HARDWARE_INFO_ARR(INCLUDE_TDC);
+ constant INTERNAL_NUM : integer := INTERNAL_NUM_ARR(CFG_MODE);
+ constant INTERFACE_NUM : integer := INTERFACE_NUM_ARR(CFG_MODE);
+ constant IS_UPLINK : hub_ct := IS_UPLINK_ARR(CFG_MODE);
+ constant IS_DOWNLINK : hub_ct := IS_DOWNLINK_ARR(CFG_MODE);
+ constant IS_UPLINK_ONLY : hub_ct := IS_UPLINK_ONLY_ARR(CFG_MODE);
+
+ function etm_id_func return std_logic_vector is
+ variable res : unsigned(7 downto 0);
+ begin
+ res := x"00";
+ if INCLUDE_ETM=c_YES then
+ res := x"60";
+ res := res + TO_UNSIGNED(ETM_CHOICE_type'pos(ETM_CHOICE), 4);
+ end if;
+ return std_logic_vector(res);
+ end function;
+
+ constant ETM_ID : std_logic_vector(7 downto 0) := etm_id_func;
+
+end package body;
jspc29 / trb3.git / commitdiff