couple of updates to Operator manual

diff --git a/hadesoperator/generalremarks.tex b/hadesoperator/generalremarks.tex
index b18a1d45518a264c72bc74a782d9fee8b0e2cf84..0169a6284671a3e44acff764895e3cfbb6aee3b3 100644 (file)
--- a/hadesoperator/generalremarks.tex
+++ b/hadesoperator/generalremarks.tex
@@ -1,9 +1,9 @@
 
 \section{Daily News}
 
-\textbf{2022/01/19 - this page will be updated during the beamtime}
+\textbf{2022/01/27 - this page will be updated during the beamtime}
 \begin{itemize*}
-  \item There are 2 or 3 MDC front-ends that fail quite soon after a restart
+  
   \item Every couple of hours, when you do a DAQ restart, please do a ``Reload ECal'' before - this 
 should take just a couple of seconds.
 \end{itemize*}

diff --git a/hadesoperator/tdccalibration.tex b/hadesoperator/tdccalibration.tex
index a4da9ca36bbc8cbf4ad56854fc5a5c732fa39785..fb0d0a108e6112b3c10efc8a020f48189b27dd41 100644 (file)
--- a/hadesoperator/tdccalibration.tex
+++ b/hadesoperator/tdccalibration.tex
@@ -51,14 +51,17 @@ the calibration. Preferably, stop the run just before the first set of files rea
 size limit (see EB monitor). Root analysis of the data starts automatically. Plots are published 
 on \url{http://hades33/calib}
  
- \item After this has finished (roughly 5-10 minutes), run hmon\_tdcchanerrors\_monitor.pl in the 
-hmon directory (roughly 5 minutes), then check the resulting plots in hmon - TdcCalMon.
+ \item After this has finished (roughly 5-10 minutes), run hmon\_tdcchanerrors\_monitor.pl in 
+the hmon directory (roughly 5 minutes), then check the resulting plots in hmon - TdcCalMon.
  
  \item You can also run a manual analysis with any hld files as input: \\
  Connect to hades63, screen 'tdccalib'. \\
  Create a list of all files to analyse, e.g. 'ls /store/*/*/*/tc22018114* | tee list22018.hll \\
- run dabc\_exe tdcmon.xml, and wait ~ 50 seconds per GB of data. Plots are published on 
-\url{http://hades33/calibtest}.
+ link this file to list.hll and run dabc\_exe tdcmon.xml, and wait ~ 50 seconds per GB of data. 
+Plots are published on \url{http://hades33/calibtest}. Afterward, run  
+hmon\_tdcchanerrors\_testmonitor.pl in the hmon directory (roughly 5 minutes), then check the 
+resulting plots in hmon - TdcCalMon.
+ 
  
  \item Be sure that the beam or the desired trigger source is switched on before starting beam or 
 cosmics files again!