*** empty log message ***

diff --git a/tdc_releases/tdc_v0.2/README.txt b/tdc_releases/tdc_v0.2/README.txt
new file mode 100644 (file)
index 0000000..7d3ac9c
--- /dev/null
+++ b/tdc_releases/tdc_v0.2/README.txt
@@ -0,0 +1,84 @@
+##-----------------------------------------------------------------------
+##                     Implementation of TDC in FPGA
+##-----------------------------------------------------------------------
+
+
+---------------------------------------------
+## v0.2 09.05.2012
+## Cahit Ugur, HIM, Mainz
+## ugur@kph.uni-mainz.de
+---------------------------------------------
+
+Contents:
+---------
+bit_file/trb3_periph.bit
+lpf_file/trb3_periph_constraints.lpf
+prj_file/trb3_periph.prj
+prj_file/trb3_periph.edf
+source/Adder_304.vhd
+source/bit_sync.vhd
+source/Channel.vhd
+source/corell.vhd
+source/Encoder_304_Bit.vhd
+source/FIFO_32x512_OutReg.vhd
+source/pll_100_in_5_out.vhd
+source/Reference_channel.vhd
+source/ROM_encoder_3.vhd
+source/ROM_FIFO.vhd
+source/TDC.vhd
+source/trb3_periph.vhd
+source/up_counter.vhd
+documentation/TDC_data_format.pdf
+documentation/trb3_ctrl_stat_regs.odt
+
+
+General Details:
+----------------
+The control-status registers map and the data format of the tdc can be found
+in the documentation folder.
+
+
+Version Details:
+----------------
+v0.2 09.05.2012
+
+# of Channels  : 32 (for rising & falling edges of 16 channels)
+LUTs used      : 41443 / 149040 (27,8%)
+Registers used : 34873 / 111780 (31,2%)
+SLICEs used    : 26570 / 74520  (35,7%)
+
+- 32 physical channels are implemented in order to measure rising & falling
+times of 16 pulses (including the reference channel). The timing information
+of the edges of the same pulse are in the adjacent channels, e.g., Ch0-rising
+edge of reference time, Ch1-falling edge of reference time, Ch2-rising edge of
+INP0, Ch3-falling edge of INP0.
+- Designed for "with trigger" run.
+- Post trigger window value must be set to minimum 0x1f
+
+
+v0.1 10.03.2012
+- 24 channes are implemented
+
+
+v0.0 10.03.2012
+- 8 channels are implemented.
+- 2 transition wave union laucher is used for precise time measurements.
+- Single edge (rising edge) is detected.
+- ROM based encoder handles the conversion from thermometer code to binary
+code.
+- The register array (after the delay line) is designed as double
+synchroniser.
+
+
+Known Issues:
+-------------
+
+v0.0 10.03.2012
+- The ROM table of the encoder has to be filled for bubble errors worse than 2
+bits. There are empty bins.
+- The double synchroniser should be removed.
+
+
+Bug Report:
+-----------
+