From: Cahit Date: Tue, 5 Aug 2014 11:49:33 +0000 (+0200) Subject: Typo correction and feature bit addition X-Git-Url: https://jspc29.x-matter.uni-frankfurt.de/git/?a=commitdiff_plain;h=5c11daf92d6b1e48c2070a96a9598156f015c657;p=daqdocu.git Typo correction and feature bit addition --- diff --git a/trb3/IncludedFeaturesTable.tex b/trb3/IncludedFeaturesTable.tex index eb2b9c2..f40704a 100644 --- a/trb3/IncludedFeaturesTable.tex +++ b/trb3/IncludedFeaturesTable.tex @@ -37,6 +37,8 @@ channel with stretcher \\ words, 3:108 words \\ & 15 & TDC & Contains a TDC \\ & 17 -- 16 & ReadoutModule & Number of readout modules \\ + & 41 & ReferenceTime & Reference Time Path 0: RJ-45 (default) 1: +Through Clock Manager (cbmtof only)\\ & 42 & Spi & Contains SPI on all relevant I/Os depending on AddOn board design\\ & 43 & Uart & Contains an Uart\\ & 47 -- 44 & InpMonitor & See table 1. Pinout should match the one of the TDC\\ diff --git a/trb3/TriggerModule.tex b/trb3/TriggerModule.tex index e19572b..69bb649 100644 --- a/trb3/TriggerModule.tex +++ b/trb3/TriggerModule.tex @@ -31,8 +31,8 @@ An additional module is used to have counters for each of up to 32 input channel be stored in a Fifo at an adjustable rate. The Fifos for all channels are controlled by a common logic and store their data synchronously. Filling of the Fifos has to be triggered and stops after 1024 samples have been acquired. -To save ressources, it is also possible to use only one monitoring fifo combined with a multiplexer -to select one of the inputs as source. +To save resources, it is also possible to use only one monitoring Fifo combined +with a multiplexer to select one of the inputs as source. \begin{description*} \item[cf00, cf02 .. cf1e] Input enable mask. Up to 16 times, according to number of outputs. @@ -48,8 +48,9 @@ to select one of the inputs as source. \item[cf8e] Status of all input signals \item[cf8f] Bit 0: Trigger recording of data. Fifo are cleared, then 1024 samples are acquired\\ Bit 1: Reset counters\\ - Bit 20-16: Input select (if only a single fifo is used) - \item[cfa0 .. cfbf] One fifo for each input. Up to 1024 values of 18 Bit are stored. The uppermost + Bit 20-16: Input select (if only a single Fifo is used) + \item[cfa0 .. cfbf] One Fifo for each input. Up to 1024 values of 18 Bit are +stored. The uppermost bit is the Fifo empty signal (data invalid) \item[cfc0 .. cfdf] One counter for each input. The width is 24 Bit. \end{description*}