From: Jan Michel <j.michel@gsi.de>
Date: Fri, 20 Dec 2013 12:38:56 +0000 (+0100)
Subject: updated list of errors on CB13
X-Git-Url: https://jspc29.x-matter.uni-frankfurt.de/git/?a=commitdiff_plain;h=5cef5dc367cfd13c35410c99d97178096c8d1704;p=mvdelectronics.git

updated list of errors on CB13
---

diff --git a/CB13_errata.txt b/CB13_errata.txt
index 87bddc6..18e1afd 100644
--- a/CB13_errata.txt
+++ b/CB13_errata.txt
@@ -1,5 +1,7 @@
 Major Issues
 - Footprint of sn74lvc1g157gw has wrong supply voltage polarity
+- Supply disable must not be used when supply voltage is above 4.0V
+- Supply disable must not be used while any logic signal to the sensor is high
 
 
 Minor Issues
@@ -7,3 +9,5 @@ Minor Issues
 	- The two high signals TMS, Reset, i.e. the uC has to switch off the enable signals when powering down a sensor
 	- TDI on sensor 0 is high when Jtag is off due to wrong polarity
 	- TDI of sensor 1 can not be switched off fully
+- LED on all enable lines would be helpful
+