From: Jan Michel <mail@janmichel.eu>
Date: Thu, 3 Feb 2022 18:27:07 +0000 (+0100)
Subject: update operator manual
X-Git-Url: https://jspc29.x-matter.uni-frankfurt.de/git/?a=commitdiff_plain;h=6087f1f281594f6875617389d6bf0a47a1f32d43;p=daqdocu.git

update operator manual
---

diff --git a/hadesoperator/generalremarks.tex b/hadesoperator/generalremarks.tex
index 8793809..9a12615 100644
--- a/hadesoperator/generalremarks.tex
+++ b/hadesoperator/generalremarks.tex
@@ -1,13 +1,19 @@
 
-\section{Daily News}
+\part{Daily News for the Operator}
 
-\textbf{2022/01/31 - this page will be updated during the beamtime}
+\textbf{2022/02/03 - this page will be updated during the beamtime}
 \begin{itemize*}
-  \item Nothing to report, yet.
+  \item Always keep an eye on the rate plots (``Main Screen 4'' on the web page). If you notice any 
+asymmetry between sectors / parts of detectors, try to do a reload of thresholds for the detector 
+(do a ``Start Stop DAQ'' before and after to avoid taking corrupted data). If this doesn't help, 
+talk to the detector expert, e.g. a power cycle of the frontends might be necessary.
+
+  \item Every 1 to 2 hours, when you do a DAQ restart, please do a ``Start Stop Trigger'', ``Reboot 
+DiRich'' and a ``Reboot ECal'' before.
 \end{itemize*}
 \clearpage
 
-
+\part{General Advice}
 \section{Main Tasks}
 \begin{itemize*}
  \item Operate the data acquisition, mainly using the 
@@ -19,7 +25,7 @@
  \item Make entries to the logbook about configuration changes and important issues.
 \end{itemize*}
 
-\subsection*{DAQ Shifts}
+\section{DAQ Shifts}
 \begin{itemize*}
  \item Please make sure your first shift is one of the day shifts, not a night shift. During the 
 day availability of experts is better, so you can get more help.
diff --git a/hadesoperator/main.tex b/hadesoperator/main.tex
index 0094c3b..2f580f0 100644
--- a/hadesoperator/main.tex
+++ b/hadesoperator/main.tex
@@ -107,7 +107,8 @@
 \tableofcontents
 
 \cleardoublepage
-\part{General Advice}             \input{generalremarks}
+
+\input{generalremarks}
 
 
 \clearpage 
diff --git a/hadesoperator/powercycles.tex b/hadesoperator/powercycles.tex
index e15be20..eaa4399 100644
--- a/hadesoperator/powercycles.tex
+++ b/hadesoperator/powercycles.tex
@@ -47,21 +47,27 @@ A full powercycle should only be done after contact with an expert. Follow the g
 \section{Full Power Cycle / Daily DAQ reboot}
 This should be performed at least once a day, when there is a break of ~ 15 minutes and in presence 
 of the DAQ expert: {\bf To be updated for 2022!}
-% \begin{enumerate}
-% \item MDC power supply group off (EPICS) 
-% \item RICH power supply group power cycle (EPICS) \\
-%       Main power supply group power cycle (EPICS) 
-% \item ECAL Padiwa Powercycle \\
-%       Start Powercycle \\
-%       CentralControls Powercycle \\
-%       iTof Powercycle \\
-%       Hodo Powercycle
-% \item Reprogram FPGA \\ 
-%       BLR Reload Settings
-% \item Start DAQ (x2, because of MDC Hubs)      
-% \item MDC power supply group on (EPICS)
-%       MDC LV Turn On All Relais
-% \item Reboot OEP
-% \item Start DAQ
+\begin{enumerate}
+\item Switch off beam on control panel
+\item MDC power supply group off (EPICS) 
+\item ECAL Padiwa Powercycle \\
+      Hodo
+      Start Powercycle \\
+      STS Fee \\
+      iTof Powercycle \\
+      Triggerbox Beam \\
 
-% \end{enumerate}
+\item RICH power supply group power cycle (EPICS) \\
+      Main power supply group power cycle (EPICS) 
+
+\item Reprogram FPGA \\ 
+      BLR Reload Settings
+\item Start DAQ (x2, because of MDC Hubs)      
+\item MDC power supply group on (EPICS)
+      MDC LV Turn On All Relais
+\item Reboot OEP
+\item Start DAQ
+\item Load ECal Thresholds
+\item Check Eventbuilders getting data / all boards have IPs
+\item Switch on beam
+\end{enumerate}