From: Philipp Klaus <klaus@physik.uni-frankfurt.de>
Date: Wed, 3 Aug 2016 15:21:23 +0000 (+0200)
Subject: latchup detection (by Lukasz Mik 28.06.2016)
X-Git-Url: https://jspc29.x-matter.uni-frankfurt.de/git/?a=commitdiff_plain;h=635b9d6b6c6b469db3aed2dcb0f72ae3e20fd089;p=mvd_firmware.git

latchup detection (by Lukasz Mik 28.06.2016)
---

diff --git a/firmware/src/Makefile b/firmware/src/Makefile
index a4a4fe5..ba2b532 100644
--- a/firmware/src/Makefile
+++ b/firmware/src/Makefile
@@ -11,6 +11,7 @@ OBJS+=spi2.o
 OBJS+=spi3.o
 OBJS+=dac.o
 OBJS+=misc_utils.o
+OBJS+=exti.o
 # OBJS+=version.o
 
 # OBJS+=keypins.o
diff --git a/firmware/src/generatePinConstants/generate.sh b/firmware/src/generatePinConstants/generate.sh
old mode 100755
new mode 100644
diff --git a/firmware/src/main.c b/firmware/src/main.c
index ed586bb..9d4eab5 100644
--- a/firmware/src/main.c
+++ b/firmware/src/main.c
@@ -22,19 +22,25 @@
 #include "periph_conf.h"
 #include "misc_utils.h"
 #include "version.h"
+#include "exti.h"
 
+//#define MAX_CURRENT 39720 //16 bit value for 2000mV -> 200mA // REF=3300mV
+#define MAX_CURRENT 65535
+#define MAX_CURRENT_A 36739 //185mA for analog part
+#define MAX_CURRENT_D 23830 //120mA for digital part
 
 
 extern uint16_t SPI_DMA_Buffer[];
 extern uint16_t SPI_DMA_Buffer_In[];
 extern uint16_t uC_regs[];
+extern uint8_t irq_stateD0;
+extern uint8_t irq_stateA0;
+extern uint8_t irq_stateD1;
+extern uint8_t irq_stateA1;
 
-
-
-// prototypes for functions that are included in main.c
-
-// void SysTick_Handler(void);
-
+uint16_t system_start_cnt = 0;
+uint8_t system_start = 0;
+//uint16_t cycle_cnt = 0;
 
 
 /* function prototypes */ 
@@ -50,13 +56,7 @@ int main(int argc, char *argv[]) {
   SystemInit();
   disable_JTAG(); //disable JTAG to free GPIO ports
   init_CB_GPIO_Outputs();
-  
-// configure timer interval
-// 	SysTick_Config(16777215); // standard
-// 	SysTick_Config(7200000); // 10 Hz interrupt
-// 	SysTick_Config(720000); // 100 hz
-// 	SysTick_Config(72000); // 1000 hz
-
+  init_GPIO_EXTI();
 
   init_SPI1();
   init_SPI2();
@@ -65,8 +65,17 @@ int main(int argc, char *argv[]) {
   init_USART1();
   init_USART3();
   
-  delay_ms(1000);
-  CB_GPIO_Out_Hi(LED4);
+  delay_ms(500);
+
+  //set maximum current value for discriminators
+  usart3_word_to_dac(((MAX_CURRENT&0xFFFF)>>4) | (0<<12));
+  usart3_word_to_dac(((MAX_CURRENT&0xFFFF)>>4) | (1<<12));
+  usart3_word_to_dac(((MAX_CURRENT&0xFFFF)>>4) | (4<<12));
+  usart3_word_to_dac(((MAX_CURRENT&0xFFFF)>>4) | (5<<12));
+
+  delay_ms(500);
+
+  //CB_GPIO_Out_Hi(LED4);
   uC_regs[0x0b] |= (1<<0) | (0<<1) | (1<<2); // adc readout and converter board status is reported
   // by default, but the readout of VDiscRef lines is disabled.
   
@@ -75,9 +84,12 @@ int main(int argc, char *argv[]) {
   report_all_registers();
 
   while(1) {
-    
+
+    if (system_start == 1) system_start_cnt++;
+ 
     if(BufferOut(&UcRegAddr)){
       decode_register(UcRegAddr);
+      system_start = 1;
     }else{
       if(uC_regs[0x0b] & (1<<0)){ // ReadPwr bit set?
 	adc0_read_pwr();
@@ -91,37 +103,48 @@ int main(int argc, char *argv[]) {
       if(uC_regs[0x0b] & (1<<2)){ // ReadStatus bit set?
         SensorControlStatus();
       }
-    }
-    
-  }
-  
-  return 0;
-}
-
-
-
 
+      if (system_start_cnt >= 9000){	//wait for end of the JTAG programming (above 10 seconds)
+	 system_start = 0;
+	 system_start_cnt = 0;
+         CB_GPIO_Out_Hi(LED4);
+	 //set proper thresholds
+         usart3_word_to_dac(((MAX_CURRENT_A&0xFFFF)>>4) | (0<<12));
+         usart3_word_to_dac(((MAX_CURRENT_D&0xFFFF)>>4) | (1<<12));
+         usart3_word_to_dac(((MAX_CURRENT_A&0xFFFF)>>4) | (4<<12));
+         usart3_word_to_dac(((MAX_CURRENT_D&0xFFFF)>>4) | (5<<12));
+      }    
+    }
+   
+    //chip_0
+    if ((CB_GPIO_In_State(OVCA_C0)==0) && (CB_GPIO_In_State(OVCD_C0)==0) && (irq_stateD0 == 1 || irq_stateA0 == 1)) {
+    	system_start_cnt = 0;
+	system_start = 0;
+        CB_GPIO_Out_Lo(LED4);
+    	usart3_word_to_dac(((MAX_CURRENT&0xFFFF)>>4) | (0<<12));
+    	usart3_word_to_dac(((MAX_CURRENT&0xFFFF)>>4) | (1<<12));
+ 	CB_GPIO_Out_Hi(SENSOREN0);
+ 	CB_GPIO_Out_Hi(JTAGEN0);
+    	irq_stateD0 = 0;
+    	irq_stateA0 = 0;
+    }
 
-
-
-/*
-void SysTick_Handler(void)
-{
-  //do something
-
+    //chip_1
+    if ((CB_GPIO_In_State(OVCA_C1)==0) && (CB_GPIO_In_State(OVCD_C1)==0) && (irq_stateD1 == 1 || irq_stateA1 == 1)) {
+    	    system_start_cnt = 0;
+	    system_start = 0;
+            CB_GPIO_Out_Lo(LED4);
+    	    usart3_word_to_dac(((MAX_CURRENT&0xFFFF)>>4) | (4<<12));
+    	    usart3_word_to_dac(((MAX_CURRENT&0xFFFF)>>4) | (5<<12));
+     	    CB_GPIO_Out_Hi(SENSOREN1);
+     	    CB_GPIO_Out_Hi(JTAGEN1);
+            irq_stateD1 = 0;
+            irq_stateA1 = 0;
+     }
+  } //end of while loop
+  return 0;
 }
 
-*/
-
-
-
-
-
-
-
-
-
-
 
 /* Handles interrupt from USART1 */
 void USART1_IRQHandler(void)
diff --git a/firmware/stm32loader.py b/firmware/stm32loader.py
old mode 100755
new mode 100644