From 370e1f17b4eee63b5d486add2989db5e437bd01c Mon Sep 17 00:00:00 2001 From: Jan Michel Date: Mon, 31 Jan 2022 11:11:35 +0100 Subject: [PATCH] update operator manual --- hadesoperator/expert_powersupplies.tex | 2 +- hadesoperator/generalremarks.tex | 6 +-- hadesoperator/hmonwindows.tex | 53 ++++++++++---------------- hadesoperator/powercycles.tex | 6 +-- 4 files changed, 27 insertions(+), 40 deletions(-) diff --git a/hadesoperator/expert_powersupplies.tex b/hadesoperator/expert_powersupplies.tex index 1aaf70c..d58ef8e 100644 --- a/hadesoperator/expert_powersupplies.tex +++ b/hadesoperator/expert_powersupplies.tex @@ -18,7 +18,7 @@ There are several interfaces for control, depending on the supply. \begin{description} \item[RichFans] Coolings fans on RICH \item[ECal 1/2/3] ECal Padiwa (two channels per sector) - \item[CentralControls] Channel 1: iTOF Trb\\ Channel 2: Trigger fanout at CTS, Triggerbox, + \item[CentralControls] Channel 1: iTOF Padiwa\\ Channel 2: Trigger fanout at CTS, Triggerbox, Beammonitor\\Channel 3+4: CTS Trb, BLR \item[STS 1/2] STS Fee \item[Start] Channel 2+4: Start Trb \\Channel 1: Start Padiwa\\Channel 3: Start Fans diff --git a/hadesoperator/generalremarks.tex b/hadesoperator/generalremarks.tex index 0169a62..8793809 100644 --- a/hadesoperator/generalremarks.tex +++ b/hadesoperator/generalremarks.tex @@ -1,11 +1,9 @@ \section{Daily News} -\textbf{2022/01/27 - this page will be updated during the beamtime} +\textbf{2022/01/31 - this page will be updated during the beamtime} \begin{itemize*} - - \item Every couple of hours, when you do a DAQ restart, please do a ``Reload ECal'' before - this -should take just a couple of seconds. + \item Nothing to report, yet. \end{itemize*} \clearpage diff --git a/hadesoperator/hmonwindows.tex b/hadesoperator/hmonwindows.tex index 9cabdf2..d09b128 100644 --- a/hadesoperator/hmonwindows.tex +++ b/hadesoperator/hmonwindows.tex @@ -18,15 +18,13 @@ fast and slow channels and their ratio \item[FrpcRate] fRPC rate on all channels \item[FrpcRateHist] fRPC rate on all modules over time \item[GbeRate] Amount of data on each Ethernet link - \item[HodoPosition] - \item[HodoRate] - \item[HodoRatePlot] - \item[HodoRateX\_0] - \item[HodoRateY\_0] - \item[HodoSpillShapeAnalysisX\_0] - \item[HodoSpillShapeAnalysisY\_0] - \item[ItofRate] - \item[ItofRateNumbers] + \item[HodoPosition] Position of the beam on the hodoscope + \item[HodoRate] Rate on all channels of the Hodoscope + \item[HodoRatePlot] Rate on all channels of the Hodoscope + \item[HodoRate*\_0] Rate on all channels of the Hodoscope + \item[HodoSpillShapeAnalysis*\_0] Spill structure from Hodoscope + \item[ItofRate] Rate of all TDC channels in iTOF + \item[ItofRateNumbers] Rate from all paddles of iTOF \item[MDCBusy] Time of busyness of each MDC front-end motherboard (MBO). \item[MDCFailure] Front-end Errors recieved by DAQ. \item[MDCHV] Current HV \& ionisation current measurement of field \& cathode wire layers inside each of 24 drift-chambers. @@ -46,39 +44,30 @@ fast and slow channels and their ratio \item[MdcPressurePlane4] Trend plot of overpressure inside each of 6 Plane 4 drift-chambers. \item[MdcScales] Trend plot of the air temperature inside the cave \item[MicroSpillStructure] The beam intensity in 20us bins, from Start detector - \item[Muxhist] - \item[Pt3AcceptRatio] + \item[Muxhist] Rates from two monitoring channels in the CTS + \item[Pt3AcceptRatio] Ratio of provided triggers to accepted triggers for main PT3 trigger \item[QA] Main tactictal overview \item[RichGas] Plots showing the gas sensors of the RICH - \item[RichHV] + \item[RichHV] RICH HV settings \item[RichInnerTemp] Display of the temperature sensors attached to the spokes inside the RICH detector \item[RichMagnet] Display of the magnetic field sensors attached to the spokes inside the RICH detector \item[RichRate] RICH rate per channel (ordered by DiRICH-Nr.) \item[RichRatev2] Two dimensional display of the RICH rate - \item[RichTempHistoDiRICH] + \item[RichTempHistoDiRICH] Temperature history of sensors in the RICH \item[RichThresh] Two dimensional display of the DiRICH threshold settings - \item[RpcRate] + \item[RpcRate] Rate on all TDC channels of RPC \item[RpcTofRate] Rates of RPC and TOF combined \item[RpcTofSectorRate] Rates of RPC and TOF combined - \item[SpillInfoHodoX\_0] -% \item[SpillInfoStart] -% \item[SpillShapeAnalysisX] -% \item[SpillShapeAnalysisY] - \item[SpillStructure] + \item[SpillInfoHodoX\_0] Spill structure measured in Hodo \item[StartCountSpill] Start counts per spill - \item[StartPosition] - \item[StartPositionRMS] -% \item[StartPosition\_VW] - \item[StartRateNumbers] -% \item[StartRateNumbers\_VW] - \item[StartRateSimple] -% \item[StartRateSimple\_VW] -% \item[StartRateX] - \item[StartRateXhistbar] -% \item[StartRateY] - \item[StartRateYhistbar] - \item[StartSpillShapeAnalysisX\_0] - \item[StartSpillShapeAnalysisY\_0] + \item[StartPosition] Mean position of the beam on the Start detector + \item[StartPositionRMS] Width of the beam in all four parts of the Start detector + \item[StartRateNumbers] Rates from all TDC channels of the Start detector, with numbers in the +plot + \item[StartRateSimple] Rates from all TDC channels of the Start detector + \item[StartRate*histbar] Rates from the Start detector, separate for X and Y direction + \item[StartSpillShapeAnalysis*\_0] Analysis of the spill shape and regularity based on X or Y +part of Start detector \item[StsRate] STS rate for each channel \item[StsRateSplit] STS for each channel, separated in STS-1 and STS-2 \item[TDCErrors] TDC Error numbers diff --git a/hadesoperator/powercycles.tex b/hadesoperator/powercycles.tex index 3e1a152..9d3d2c2 100644 --- a/hadesoperator/powercycles.tex +++ b/hadesoperator/powercycles.tex @@ -32,8 +32,8 @@ are active again (see the list in ``EPICS Power'' -> ``RICH LV''), do a DAQ rest In the case that the power cycle triggered the temperature interlock for RICH power supplies. The 3.3V supply might be blocked by the temperature interlock - restart DAQ, then try to reset it. -\subsection*{Central Controls} -If a power cycle of the ``Central Controls'' was done, don't forget to ``Reprogram FPGA'' and +\subsection*{CTS} +If a power cycle of the CTS was done, don't forget to ``Reprogram FPGA'' and ``BLR Reinit FPGA'' before the DAQ restart. \subsection*{Other Subdetectors} @@ -41,7 +41,7 @@ Check section \ref{powersupplies} to see which power supply to switch. \subsection*{Full Powercycle} A full powercycle should only be done after contact with an expert. Follow the guide for the -``Daily Powercycle''. +``Daily DAQ reboot''. \section{Full Power Cycle / Daily DAQ reboot} -- 2.43.0