From bbf6624a2ad8add544b6bc3cd05fa45e35f25b6a Mon Sep 17 00:00:00 2001 From: Michael Traxler Date: Mon, 23 May 2022 13:11:29 +0200 Subject: [PATCH] small changes ,mt --- trb3/trb3qs_analysis.tex | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/trb3/trb3qs_analysis.tex b/trb3/trb3qs_analysis.tex index f7d1c6f..eb40154 100644 --- a/trb3/trb3qs_analysis.tex +++ b/trb3/trb3qs_analysis.tex @@ -146,7 +146,7 @@ setup): Analysis -> Histograms -> TRB_C001 -> TDC_16F7 -> Ch02 -> TDC_16F7_Ch02_RisingCalibr \end{lstlisting} -This plot should look like figure \ref{fig:tdccalibrationplot}. +This plot should look like figure\,\ref{fig:tdccalibrationplot}. \begin{figure}[!ht] \centering \includegraphics[width=1.0\textwidth]{trb3qs_img/go4_rising_calibration_plot.png} @@ -158,13 +158,18 @@ This plot should look like figure \ref{fig:tdccalibrationplot}. Now one can measure real input signals and for example two signals from a arbritrary waveform generator, with a fixed delay between the two channels. -The plot can be seen in in figure \ref{fig:tdcexampletimediff} +The plot +\begin{lstlisting} + Analysis -> Histograms -> TRB_C001 -> TDC_16F7 -> Ch02 -> + TDC_16F7_Ch02_RisingRef +\end{lstlisting} +can be seen in in figure\,\ref{fig:tdcexampletimediff} \begin{figure}[!ht] \centering \includegraphics[width=1.0\textwidth]{trb3qs_img/tdc_example_time_diff.png} \caption{A plot of the measured time difference of two channels of one - FPGA-TDC with an input signal ~40ns delayed. The time precision is + FPGA-TDC with two input signals with approx. 40ns delay. The time precision is measured to be 15ps. This is measured with a DiRICH-board.} \label{fig:tdcexampletimediff} \end{figure} -- 2.43.0