From e4d10f0275e2d20491179e3e1af1699631553b28 Mon Sep 17 00:00:00 2001
From: Michael Wiebusch <stratomaster@gmx.net>
Date: Thu, 14 Nov 2013 11:18:13 +0100
Subject: [PATCH] added sources, for REAL ...
---
.gitignore | 8 +
china_devel_board/HY-STM32_Schematic.pdf | Bin 0 -> 60725 bytes
china_devel_board/m25pxx.pdf | Bin 0 -> 45125 bytes
china_devel_board/stm32loader.py | 436 +
china_devel_board/test001/.cproject | 119 +
.../test001/.externalToolBuilders/make.launch | 8 +
.../.externalToolBuilders/make_clean.launch | 10 +
china_devel_board/test001/.project | 31 +
china_devel_board/test001/Makefile | 47 +
china_devel_board/test001/Makefile.common | 35 +
china_devel_board/test001/libs/Makefile | 38 +
.../CMSIS/CM3/CoreSupport/core_cm3.c | 784 ++
.../CMSIS/CM3/CoreSupport/core_cm3.h | 1818 ++++
.../ST/STM32F10x/Release_Notes.html | 284 +
.../startup/TrueSTUDIO/startup_stm32f10x_cl.s | 473 +
.../startup/TrueSTUDIO/startup_stm32f10x_hd.s | 469 +
.../TrueSTUDIO/startup_stm32f10x_hd_vl.s | 451 +
.../startup/TrueSTUDIO/startup_stm32f10x_ld.s | 347 +
.../TrueSTUDIO/startup_stm32f10x_ld_vl.s | 392 +
.../startup/TrueSTUDIO/startup_stm32f10x_md.s | 363 +
.../TrueSTUDIO/startup_stm32f10x_md_vl.s | 408 +
.../startup/TrueSTUDIO/startup_stm32f10x_xl.s | 467 +
.../startup/arm/startup_stm32f10x_cl.s | 368 +
.../startup/arm/startup_stm32f10x_hd.s | 358 +
.../startup/arm/startup_stm32f10x_hd_vl.s | 346 +
.../startup/arm/startup_stm32f10x_ld.s | 297 +
.../startup/arm/startup_stm32f10x_ld_vl.s | 304 +
.../startup/arm/startup_stm32f10x_md.s | 307 +
.../startup/arm/startup_stm32f10x_md_vl.s | 315 +
.../startup/arm/startup_stm32f10x_xl.s | 358 +
.../startup/gcc_ride7/startup_stm32f10x_cl.s | 468 +
.../startup/gcc_ride7/startup_stm32f10x_hd.s | 465 +
.../gcc_ride7/startup_stm32f10x_hd_vl.s | 442 +
.../startup/gcc_ride7/startup_stm32f10x_ld.s | 343 +
.../gcc_ride7/startup_stm32f10x_ld_vl.s | 383 +
.../startup/gcc_ride7/startup_stm32f10x_md.s | 358 +
.../gcc_ride7/startup_stm32f10x_md_vl.s | 399 +
.../startup/gcc_ride7/startup_stm32f10x_xl.s | 465 +
.../startup/iar/startup_stm32f10x_cl.s | 507 +
.../startup/iar/startup_stm32f10x_hd.s | 496 +
.../startup/iar/startup_stm32f10x_hd_vl.s | 461 +
.../startup/iar/startup_stm32f10x_ld.s | 366 +
.../startup/iar/startup_stm32f10x_ld_vl.s | 369 +
.../startup/iar/startup_stm32f10x_md.s | 391 +
.../startup/iar/startup_stm32f10x_md_vl.s | 394 +
.../startup/iar/startup_stm32f10x_xl.s | 496 +
.../DeviceSupport/ST/STM32F10x/stm32f10x.h | 8336 +++++++++++++++++
.../ST/STM32F10x/system_stm32f10x.c | 1094 +++
.../ST/STM32F10x/system_stm32f10x.h | 98 +
.../Libraries/CMSIS/CMSIS debug support.htm | 243 +
.../Libraries/CMSIS/CMSIS_changes.htm | 320 +
.../CMSIS/Documentation/CMSIS_Core.htm | 1337 +++
.../Libraries/CMSIS/License.doc | Bin 0 -> 39936 bytes
.../STM32F10x_StdPeriph_Driver/inc/misc.h | 220 +
.../inc/stm32f10x_adc.h | 483 +
.../inc/stm32f10x_bkp.h | 195 +
.../inc/stm32f10x_can.h | 697 ++
.../inc/stm32f10x_cec.h | 210 +
.../inc/stm32f10x_crc.h | 94 +
.../inc/stm32f10x_dac.h | 317 +
.../inc/stm32f10x_dbgmcu.h | 119 +
.../inc/stm32f10x_dma.h | 439 +
.../inc/stm32f10x_exti.h | 184 +
.../inc/stm32f10x_flash.h | 426 +
.../inc/stm32f10x_fsmc.h | 733 ++
.../inc/stm32f10x_gpio.h | 385 +
.../inc/stm32f10x_i2c.h | 684 ++
.../inc/stm32f10x_iwdg.h | 140 +
.../inc/stm32f10x_pwr.h | 156 +
.../inc/stm32f10x_rcc.h | 727 ++
.../inc/stm32f10x_rtc.h | 135 +
.../inc/stm32f10x_sdio.h | 531 ++
.../inc/stm32f10x_spi.h | 487 +
.../inc/stm32f10x_tim.h | 1164 +++
.../inc/stm32f10x_usart.h | 412 +
.../inc/stm32f10x_wwdg.h | 115 +
.../STM32F10x_StdPeriph_Driver/src/misc.c | 225 +
.../src/stm32f10x_adc.c | 1307 +++
.../src/stm32f10x_bkp.c | 308 +
.../src/stm32f10x_can.c | 1415 +++
.../src/stm32f10x_cec.c | 433 +
.../src/stm32f10x_crc.c | 160 +
.../src/stm32f10x_dac.c | 571 ++
.../src/stm32f10x_dbgmcu.c | 162 +
.../src/stm32f10x_dma.c | 714 ++
.../src/stm32f10x_exti.c | 269 +
.../src/stm32f10x_flash.c | 1684 ++++
.../src/stm32f10x_fsmc.c | 866 ++
.../src/stm32f10x_gpio.c | 650 ++
.../src/stm32f10x_i2c.c | 1331 +++
.../src/stm32f10x_iwdg.c | 190 +
.../src/stm32f10x_pwr.c | 307 +
.../src/stm32f10x_rcc.c | 1470 +++
.../src/stm32f10x_rtc.c | 339 +
.../src/stm32f10x_sdio.c | 799 ++
.../src/stm32f10x_spi.c | 908 ++
.../src/stm32f10x_tim.c | 2890 ++++++
.../src/stm32f10x_usart.c | 1058 +++
.../src/stm32f10x_wwdg.c | 224 +
china_devel_board/test001/linker.ld | 162 +
china_devel_board/test001/src/Makefile | 22 +
china_devel_board/test001/src/main.c | 364 +
china_devel_board/test001/src/newlib_stubs.c | 277 +
china_devel_board/test001/src/periph_conf.c | 764 ++
china_devel_board/test001/src/periph_conf.h | 400 +
.../test001/src/platform_config.h | 82 +
china_devel_board/test001/src/serial.c | 71 +
china_devel_board/test001/src/serial.h | 5 +
china_devel_board/test001/src/spi.c | 67 +
china_devel_board/test001/src/spi.h | 5 +
china_devel_board/test001/src/spi_conf.h | 92 +
china_devel_board/test001/src/startup.c | 281 +
china_devel_board/test001/src/stm32_eval.h | 374 +
.../test001/src/stm32f10x_conf.h | 25 +
china_devel_board/test001/src/stm32f10x_it.c | 185 +
china_devel_board/test001/src/stm32f10x_it.h | 54 +
china_devel_board/test001/stm32loader.py | 436 +
spi_on_demoboard | 1 -
118 files changed, 58871 insertions(+), 1 deletion(-)
create mode 100644 .gitignore
create mode 100644 china_devel_board/HY-STM32_Schematic.pdf
create mode 100644 china_devel_board/m25pxx.pdf
create mode 100755 china_devel_board/stm32loader.py
create mode 100644 china_devel_board/test001/.cproject
create mode 100644 china_devel_board/test001/.externalToolBuilders/make.launch
create mode 100644 china_devel_board/test001/.externalToolBuilders/make_clean.launch
create mode 100644 china_devel_board/test001/.project
create mode 100644 china_devel_board/test001/Makefile
create mode 100644 china_devel_board/test001/Makefile.common
create mode 100644 china_devel_board/test001/libs/Makefile
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/CoreSupport/core_cm3.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/CoreSupport/core_cm3.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/Release_Notes.html
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_cl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd_vl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld_vl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md_vl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_xl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_cl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd_vl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld_vl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md_vl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_xl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_cl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd_vl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld_vl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md_vl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_xl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_cl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd_vl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld_vl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md_vl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_xl.s
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/stm32f10x.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CMSIS debug support.htm
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CMSIS_changes.htm
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/Documentation/CMSIS_Core.htm
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/License.doc
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/misc.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_bkp.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_can.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_cec.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dac.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_exti.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_flash.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_iwdg.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_pwr.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_wwdg.h
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_adc.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_can.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_fsmc.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_sdio.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c
create mode 100644 china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c
create mode 100644 china_devel_board/test001/linker.ld
create mode 100644 china_devel_board/test001/src/Makefile
create mode 100644 china_devel_board/test001/src/main.c
create mode 100644 china_devel_board/test001/src/newlib_stubs.c
create mode 100644 china_devel_board/test001/src/periph_conf.c
create mode 100644 china_devel_board/test001/src/periph_conf.h
create mode 100644 china_devel_board/test001/src/platform_config.h
create mode 100644 china_devel_board/test001/src/serial.c
create mode 100644 china_devel_board/test001/src/serial.h
create mode 100644 china_devel_board/test001/src/spi.c
create mode 100644 china_devel_board/test001/src/spi.h
create mode 100644 china_devel_board/test001/src/spi_conf.h
create mode 100644 china_devel_board/test001/src/startup.c
create mode 100644 china_devel_board/test001/src/stm32_eval.h
create mode 100644 china_devel_board/test001/src/stm32f10x_conf.h
create mode 100644 china_devel_board/test001/src/stm32f10x_it.c
create mode 100644 china_devel_board/test001/src/stm32f10x_it.h
create mode 100755 china_devel_board/test001/stm32loader.py
delete mode 160000 spi_on_demoboard
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..4aceee5
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,8 @@
+# ignore editor scraps
+*~
+# ignore compiled stuff
+*.a
+*.o
+*.bin
+*.hex
+*.elf
\ No newline at end of file
diff --git a/china_devel_board/HY-STM32_Schematic.pdf b/china_devel_board/HY-STM32_Schematic.pdf
new file mode 100644
index 0000000000000000000000000000000000000000..fafad60ae42d66d91dd7ecc7f42fc70a2059795c
GIT binary patch
literal 60725
zcmafZ1ymf((l+iAAi;yXySuwfa9y0m-QC^YJxFkO3l`kn3GN#B;l1+R@4eqS|Lo40
zo~rJu>XP1_XPQ(&M2wb^js=l)d*{~-A{-k51A&d91tJd*y^J{!U|?_V4lpKQq?aLJ
zV_;`urI#n*pcf@zWn*Pyq?dcAtGv@$Svlz?2($>;S=k5}IT>~M_z(d=;}0nW|Hpv{
z=V}iy`Ow6~j0nf@&x7$@@y9^`{5Or0h5hd|Mg}I9|DrK5F#Q*enTh$oXzZM<|3%|q
zX81dejgkGo^s+HC{GIl03j5#nGP1BS|6K<o2Qv%j-*hlBa&r9LJ|;F+j=#^1nSqJp
z@A8<LIobbiGcy|-+u!9evvD%~eJm?08{6M)eh=Qe*Z;TgS=ksk|1OV}jpe`WV_^6Q
z`M<|H+8dZ#0qhas-jhf9J#Pq@IO!Ga0nQ&O!oo?fWMkt<@a{$eC3;Dqi4DQKbstR;
zEgoSuCQ%ViG2!<wyC|m!GYbbZBO4<J6O$kZ8xtFo2p<mvI}4`}GovV{APWbR7z+!B
z5Ids?BNHcs2&2&ZFgCuAq=R#CG_ZI4M|LqF!jY1S%8Mbw{XGQ{;g~r7Bgp|kQ%5rb
zMg|soF>@<NfIYpKm4PEb1Yl%i44{`JU}R!=&;1X!G66FuAD@GxJ;1>FJ%^VK_4Pj)
z=<7QhgZSg%V<~{5eX3)y#nt~Lfcn|b5DE$a<t@fJ2($hLL1r3ZduRc!J$A{|V5VuS
zY#X)&3-O3N3A2Pz)s~up*4NC~Siji_f^`lqR09iBw<9Q&c@+YN0Yv8dGXf&qdnx@>
z=|79=!-fAWQCWbafw6(30l|Cby!%qYz!cy>@E*DMwu+lAfL{2WXJuph7emIt5Mbp%
z!1%%ap9=jCR|wnN*b3RWYQ1Lz0UIL|0Xrv?&ihDv0MPNDGKFn`j_-F4TJPL<DFlpv
zsU=|iE0P2sCHz7BE5rnhAClki-gE!`!t^0jN#{KW9N)c5z{x-_3ote}_%C%z00$c<
zd!zSR{59?$v-p_S|5*IN_~-P6ZLDnUm2C}-0Ph(m?C`$&{Bw5nV(*r|(^OQL-edQn
z`n}0a!1$MI`1szl(#A*`;HX9azWULt09+k)=tW%}#g#vddmkpQ%t*lW*EIOvkAE#@
ze+l}hW@RTs#}5aq*gFCK^7My75rBh{y}7NUjXeR=Uk;*|F>r7cHZ!n)Pa`IJb#r4!
zGY2gu)(?Xi2v|SL?tgvWOYHrgnVFg3qYo21$6tLu`u+dTkG}sYi~U_c8yovy=U?r2
z$GjIm!AJY!{LsP7!TDF4?VZQ*&-MrJU;RGDf3!dN{~E{1!t(F-hrWO5{l{Eb-nk#G
z|Ga)^`j_?p>iuzL|J&^TG4BtXKDhrH@s~aSod3I29eN=H2f&A`=~c|F0S<Bi7bP2O
z1E7Mktjc@&+W*tp%uMv6!1ww!2b#V+9ViHNF#q@czk~H3as5b|kGN{lO9~5rXfP&V
z`YVxi{vG;{aQ-v&GXGdHSeV$^{*NW&e^v;Iu<z<C@vDs}UOCm9#A&nowq1wTHnj^>
zr(E2`+>}eKUn-5Ys*=8H$*KHYIAFovorql}9H>>*Me-HfaV(&R&WMQVY<>Gi`GO`{
z{LQQV4bbptSW%A8UzM07G(=^VXAMw7olskcLUFo%Zkt1<*6{kFG^f7!>_A#r&8I4*
zMqjb8G5VVpeO;Z}6jc(M*4#_S@jHH!qqwmjaz##!D0~<#T*-8@nMgius#<oF2%!=6
zq;*(Qc)YLorgGb*a9foTk0$*NaE*js#Z&vEA?Z=CJGj;go!@uM<o!(}5{;M*`}h=7
zj5_M}^tWfz@`*Ec_G+9~lr0$v<}W>sr9#pA$<1N*Hsshxl(+M<qhBSeUh^m3x;m$7
zU4jAq{Hj<SYR;zXKEpHh$l1TdU!#z|a*j+YUT&5?dFE;hw`k^T3%hYCc?*vG@U36~
z-Pf!7J=){8HxeP-c0KQySqRQ8sZp8q;vfPxu*M`Rzg!*vvuV5bR9IMRXg`wst|Dje
z+x_9}l<kAnfHg-mxlmrj-Y?bFU>0gTsG0<&z!6C4aHP-FXo0ul7<q{>cwMgulqwnK
zc@2XqJfE4RQoTJd{3w;yenV(|?ht^BgWHj$%yv*L3`iUW@_luX!$#4Tx+o%#>07fT
zRAo@%(_Lu0M;y`qBOaiS{=>UlV&Odf+(oYvm!U<V9Dxp_EX->;*^B+{b<&Jl=1*}?
zqs#a*oYor>tr@ZA!&8;apMyU`CQ&C<8|;=auW+zj=P91Ot+<2{&Hx(AjZPa7@wqo}
zT=h)>74Rt3b<6l)w=u%@YkC26X}GYH^aZ6-onpOZApLJ7YmKivUwv{|Ewc*C5OWQj
z)+qcv<}qu}^bjqQLJXj#HK|kuF*_Byo2{+>phbL%+5^u?Z|(KzdQ||xmm0zZ5lsq3
zeihLo;IpYmg`H4B&w+jw$T7?n;}%jV%)Y#G*|@wv9wfZIRPLc3*>_X-k<69-gZ$bZ
z2mz@TdX^pv?<P4cZ0$HzR=DILUEaUaWMi8zj^ni3no9qz4jlGZ$>7vs3KaYAW2&6T
zjX_L=Y=B4HWJWK8hz$C;T;Z-_hzJ6TU*b<FSZymof=yX8s;xpHI3n~+aVr~opc<Gc
z%<gs#p{xFU(hSULA5mrLFo51@NVD)RB_G?V%R*dIsgaK-`U`;Ld=N$qK>9fJM~YP3
zO?eO*^SL%^kP1LIL*<6M&ur$BMgW7n_GvL3?>F2dNMgcVMi)U$nEKa5U`pwy-dR_b
z<j+T(8m+ukX5YU%i~N8yA67Kw-oHrqFYbruld@@a8>?Grw$?iSgQ&+xf4PB3DqUX9
zDjL7;vw|58itR{E`uR57#36Oy4wob)pqJ?Bw}O{OE3sgf5zCy3o?{2c@=ydq?V<Yf
zHL;{_`_HLTK|X+xZ_DRah}o7<4pyrH7{=<92OW<bYSua5ZzGj=aquhbDJdSgF}BHc
zqRCVXn5CP+BE!)A{(?(C#Mhj8qof`sru1X8^F&F1#4AoYJwKI8I<95tyzb*%c;bg0
zOHnI9(YsP^1Q(?jDpE9R%t@ES7JpgAAYHbdTky@584zu&*zMz10EP6*Ytbj6K;(7U
zDQF>F*|ta+cd`N!IPmrXAr&5#XxW$Aakswx++R`y=CGH|GFPoq;FO3*3SVnk;Ko;)
z;vPC!;yT$Q-dOgUG4=~SCJRlJ@_4x@&eN;PZ*pn^eY3vr0RoC5yy7@5568ibTq)!=
zti)*KRESd2WOU3XyjnHx%Sz6bE0pJ#@|;}D(g)@>mRYQ`asXLr23dSb;lxSgL~Q6<
zAy?}WYFhcX8Q08)Bye_ay(`|K(5Gt0L9X^Ye7yypgxPv}#$4Z1>#$!5SW$0r0)2)%
zpm;N{5NxWRe$&}}LnCEkMRvw0iG(E{%)O>%g9_}x;GE(Si{AHGXsFH5vZ&Y2Z!<5r
zUtljWB#iEsZSDcsvSvGt<X8z8nNtk8Dw|URuw6%Qs9!S?GFeWJmC(?%VAkQ5z^fyv
z<5np?`?|M@{&0NQ!o=9`J{@{$iznW^5Ya-Qn_Ri&7#A}WM^<k+7S<*<mXIVvmbNV$
zs~wtoOMZ&XH(Naj$pbgi>We9}ZB#zPX;hI#sl_ZNjx$P~!0(<NK0!#Z=svAjBk4AP
zo^=FwrtB86$+qKPUu}ra3}&^`Nl#r-`bIGP`bn+&WLTEWXAknI)uIq_E{i9~5Po4~
zs#ydJ)9<)Ni_RY>Fhagh)nTh#k$=HrvAjOckWzEm5v(#hLXF?gc`>5?M++yN(DC8;
zGl?cMMx`6k=io|-42ooDqJ&(Z^3)vJ;u(pEAL$;es4DX?e@HZ1!Of8$D@EIZyg{-t
zj+n<SLA1T-f$3qV)yg_zF^*Un%>lGM`-ut#<1y|VSXoXZio_lLSU|0a?q<F|*cb$I
zlV!OtHrLihV7(`hF?x(>CTX%**4Gl}4z>O1hh6ju8TkkCq!A(+a+C`y?u(b%asw&t
z#dqp%+3M%6mBX!_Cw|$BE9_qah;=3*fejJb@Dnaqd5JmfRBhGmJ~y2_DG#Up2}^D-
z+EmB|6L!W`m7~%X%|yoPxzT)8hwCFM-7z;h)y+lpc7Y2-*}GFMi_^;YbA(az9zr(9
zUDqVpY#i-L9lJl1{ak`Lae#}qE3N$rTlFSL^Edj|BecYS*0_s5N33p(a{TF}XiV?a
zJHvc1<r>VijpW_J<WA!tmgyxYqnE}-E4*;npqtqg3l(M<Q$_cy>m7G(Tl{H;od-k6
zK&=r7UuY}=l>QdD3~Y28PFRR4W~%)ahhm|--Nl*C!>_TDlusOzHQpfEq-a=1x=S_i
zOy{Pzq$qNSNOetH{dwSfq3z-%korn0B^ObC)uvLsSw>|nKG~Jt!r(Sj+Yv`jD4T>o
zALiVxs&E`Wc{Ndn24{5pHQ7{JEG2S<C$3%RthJ1Rofv|Oi_9zncRT2ao1}Gu&?>2n
zw}n_fmKs6(vR2VCZ-FJpn)NgG&2q%yG>xk9_A731ZI_HjE9aupMDs4C{YZhdEenim
zm4=3mqPe|_{T@?V0kX*KVHw(zg&2pv%ot-zGrMHoGcV)vdo5YDR|-e7tCGQ1T4&)d
zb!9ex8+9%wQYIlXEi;T+JV6<kqbti^PM~wE9d?O^3T!W#)BRjQ{#icg2*yj6?0QQS
z2;n~iq@g%98IfYsR{(l$_@czaP-FDQ2u=8(oAkOQ*zpuPi;avaV_@o&Y#-Ev9z?3h
zVSgIRAG^sPi-f&3(vInWkgzzZ`(|_ONQfCPKwSB4u^~!iuE_znl<aHjKF8#QU2fVz
zw>K;UvvhYXEjCsf9KF2(>W>2<o)t}uswAk=YbYER(O|e6zW$WMp~utHDh-DxnY}-;
zV%Vj3(ux5C!LI}OT}aheGqhIO?AQm1O$6HKD=WyieEe|MZhJcH#X9O9>*MfyvMp(m
zr-Y=e3J2&bm?EhLhM8<rQE9FZ#i}>USx6m(mMoe~HoAtnP&-)$`sr+w@;Dp@8DCKa
z3TW$=MH@M{<WRROWOR~@ceLFyO)iR!+JYv7uj-9EwT)HIv&u3!WyX-wQm5j6{wCt~
zv$PE}3NGgi9&`(q`;5bFEIDXq5-DvJXlIff<sKbn9v$^|(5{`lGiX5ZM6DqOKS~06
z@uNXmc}HfX%swUI<mv6r5X3)m7PXDk0U(_}+n(ZzE3m_WBiL3#2~sVyK*}O>mZ-o%
zoM`l%I9(8G&47VT+JzTqM(!a+l8tKqE3{uY4v|hsf$IeI=Sf`_e+JP}qQnCFWB%wB
zP3lOW&g5Bb9VmnG7a{jT)VJSizsn<Hi3om5cC@Jf+0dbXRGi0f3XJHxF46s6XMZic
z@##-D&o{ca-y<?Ew|R##7D#o|4KK4@tydgi*f+j{myOh5r~#{3T4U?U_KyxCJ)O*r
zha2>5U?Dxzn_@(Ot}6XY<y9GNbP4N6UMAIE+m;J6VbqO~y`~=F#Nr7%^!7N}wfJUw
z@w?||m-R0m`!P+T9*K6@M-<+~&^#8EjZW><7?BEGms01>ZLJsCzQ_KrL3wA2S}Y3$
z0eLM$HT1vfE>gJeLxq<53DMa+aM$(rLVQ^nw(GCxPCQEC4g4pvM0yNlfO0J@hf+nm
zyMkpU7cWM;x*0>gOrPvG_ekYgmv*;*QJiXzsKkOjQ?FP&iVW+oEbu-xn{leN&WezO
zL>>lRYO)r720ud%VeQqmp#u;CrA9|vkNdCCic%9>6+2(5sH=?bY<1kFrYLX4pj%q^
ziC2dBVjWygR%U)gu(ZfMx7)H3;XexBpLpHBoU9+u^IEis*Le*12|u$TR=)f;)USy8
zf$<Z(@w!aW%P`$4C+H_kqfxGTk`gWQI2Q6Rw)090Yvs&BHbrjRm(DNE5DBMfQT`Xh
zs)q)vh0KyJwTv57Rm{n$(5vj4Sxe_`13zeW+zTdo>|^X5(qIh~GeKp4>wg}=mDafQ
zWT%eSNU9c!7bxQyi`Q{`V7rPdH7=(vkVv*!R#YnIp~0twWS42rnMH8f0Qqe6u*nq(
zVifc+<#AcybQLr@<FEs>vk#+K`}`Q};Pi*yE4!`>%v;w(i`(G7V_OuCud%}{w!<Lg
zxt+jZ!-#$xi+&ScHx*5{doV&w&<w$mOs?lXEzX!v$izKmG}m2Wp9L3;_=R-Cx8kIE
z{Z~MmI-}ZvilsskOgWYl)GSC&*5z*mb|Y`?GiZ&LR~0+RWcj`QP0U|kX+(`KJQl%^
znbe$JdvdYxT(?Z=S5rD_N;)pYbr+*BNVTB4hGb*IXO2WS&A|&$gvx@LX(hK0UWyNV
z#MTk^Mvhoz!vTcE;MG6f8KmW$Aa$kFCF8!6`nLIWb9>qT%Gr!$u#4dt5+0&-bEWx(
zI~ri*=D`OM0`^nqsu|ZV<G?m7X0OM~4L7Of^19r$@S^xf0jZh#C2zN1gix&xcET8v
zgzj`lxc1y7gV_aV(qUbHZrf0vqgmWA<(FE4cs5;(&DJn!oS8JDq+h%Dd@KkzI?e0a
zx-7D8`Tl{j6M4K#pd5MAc-$al`rNLwve1Oq3#M}S6RY$Ve-waKxfqr@<tZsrwSL2F
z!kKs4&_YUC?g0#07u>wbmUzJrN`rj2U0<%&(O&eD;F7QFz8uZ!v$OQ#@G4Eo&6`@V
zzvj)~To|XsH^#f4TS?QrRZ4yZUyWN9V1~#Wrz_)uZK3&suU_TqSl-gS_66G{@5yBz
z3#Kfq67i&$;OBf1vuv=FyP7Y&Me~-Z7H`N7sot?pSzF<(pqukB0Rc58DqIqWca=|_
zaN)Hip6<x=p0!6Gns(D5`RiC4b~iAnhDsfr6(-_4gHept_G?cqY|)|mP4S~^ohPgU
zdVDotM<FO=>y*iG4w*<{usVE|AyJh|VefL32KgJFUT)`A8S*Z>y@UW#*i{kgW21I5
z6_7j@D-Y`p@q`F9_JnCzKJI|UF=2q!f4<olEY4jWOX=6wMvm6*-}`?3q6!!+p#okM
ze-NOGex-5WDq*b0mRSo_4WcAS3*;6dBGeDDAGqP`bZpqI*GPvE0*{=$%TOtsOywYv
zitq~{TCBKBg(V|nL*$8FOur-t^AoctMnbZ@;I{aV1J-S2ZBLgmEKZ;A-auYR?8pBP
zwDB*@?C+@8JM_gs{{eTsLy`tS#}7p21K4^8N!~HOe`7R4(o!-ag4A-#=GMwiKzbD$
zRiOC?tV+Q27gG2?AdRH)JE~~z=te8?55Vt3-hbdTAE?;>24CKBqW=r8{ZH^^OkLIn
z=O;?XwfdMH6sY*0KX&yJZnWo`%c=E--7v17;vvC2{GyP4{`yr>4zwS}lDg`L{}jxc
znf?2$e4)BR_s`U!*j5fOGRBK3ioH>Oe1{$HPh&TRY@Z%R#(*Bif)>K!`bugBz>R85
z#tWFKK7O~dE&XhH;IYto^!?nZ;?LYOUBe39eX))Um%&LR^Mgl&Ul#2=ld+47;g2oB
zM~^vLC;VkC;%evnrioxae4nISKoau%4?J)jIA;!>;8I(>zE%^L>V5Ls>D9$hd@oi~
zd_U1|(xzL_=)B@X3v7(whw5JB`voz`PFKp83eHpvXp*Uzn<Kv(gIB?$yX1JWT#J77
zPX2{!xb4~?aJaJK;db`GTVGs7s<!jRS|cuh9!rrrs?>{4vBYkc?w)fjLi0X-2QS20
ztFolGk@RHy(lpHCQ%hR(YLheO`=65blNw~c#l+yAgRo8E>V3#_!|Jbe!e<Eu7bzV|
zKiOBrLH!NPoH*&JUo|h)`!)hy|Hx(M3_ws|hRc1bfdpM)>RQPGfU;3p0=Yt-8NaoB
zw>*yY7j_)MFZ~sbZC@{I5g3Z}BgO$_3N(eD74MQ#8HADWnh*Jy)jCkx!aw6iqyko*
z2>3#yPBa}5K;613;Y|8-iN{KSZB!#9+ZRKgC=bwVTag$6J&)iyX7qXpgF4~Bc;nj(
z7~7a3FXr`%9ioVMRMYD?jqL!N;ggtfupcs%HfITtTey0XKA>P2_w#+FD>)Jv)DR#S
zU_?F%G%AV!8S8T-8R+nA*oy^nYwg&!p~Bj;PYa2MdG|TYvj`;L-x!JOxenKjS5jWz
z0QI9Ye6@S^;@ej*jhED>{ikw+qZ3HR47Pn8&P}%S56yIBI?9?474%ya*HBecfy^z9
z9jD2OvwWLR*xlV5&R5M#-Y5RM5=>sy4M5^zYR{`V)E+9Hs-+i<5x8R2cyQcy`x$M_
z1;H$$79Q&TS+p-!)#G(467-5ao&IpZbhwIwQHFf*s)*0wj`|`T0a5ry2~IX9<`7x3
zHgO3m=St&}o%#-5K3%8DDyu4zLLw8ADXW3f*_+vWN&-jD=%iLYnvb@cf^yXLm!EeD
zNXuulSEZt_`fvezxL{c+*5}b<qr1><wwEq63nKXYt-Z0R#^z>}l%*{vs%kG39zU@)
zC)nq&A=5|pj&N+qH^)@E_a(rJ+*fT=KnCy>P@%s}#+N$bQ02CQl&@UD&0~+is|*Xe
zgKS-D`c8t0j9;j9)MpikVM%|5G@fa1#tkDeRZt2RI@hdEsqRTdMc8AMEm1-USK&r=
zs|CwqOI)j3+(0fmJxy{1gW8A*G|&hk$r+=s6TR&|%UVnWh5@PupO3=+9O5KEYTQb&
znDF`;AI`{-5Sv>=|Fj-UG^2U3Rd>n1Sa*ptmo1Nm#QQ1iR@Ci^1PP!HHET6{(RJ-L
zR2&;9U;OO%AjdWZGLl_YB0o>9qvALyw^8`Rn|avD4o{9jkbEEE_k7Jld-AsFQ00CH
zk5mc;?T+0LrI8E@y&+d)kYS^}>091ibi2-xZA1`DO0DLRLJYgl4^i2~VL0ZPj>Kmp
zWL>7;pDxIrLCI%Ch=m_*$mX+UGD9pl4x7B@;ie;$bfXgY%Z@21`QmaMokW7Ug2@8p
z`X?;HkA#h6ZwVv`@0=v|v9j+aJ15ChYJdC|XIu`SsyflAQ8c@{a=ev8>!5@6Vn-(B
zf-L2vk2H?$C2TMS{YlW^K%2;;PNlIa0522#4GmuN2ZU8PXNY!a3g>QUEUe%1oIl=j
z+L7;&(u9IWHU>j+-~z<STcGcr8}_Bh8yEV?AcTdui70Lvu<h`$Fb94KQCKb@mNFRo
zrh}*RI&lx6OdMi?JY&k6Ts$bGIRUq7F<t05yUdHz?6v>>kv`%~KqC>12cuzQs69P&
z$vmgT2+vZ_=xf+-PR0PWP)>rIyy7i;RL#CWVf*zoOGu>K!6CcCl!!!P5eSG*Dl#us
z?cV4(bjUxF5cKX^Xp0Kwq1Vl6B|us-`~2>$u_IKC^3?YSay%RZ=>*79y|@jJ)9B41
z?c;Y**NNt+dCFYZY(@^|sytiXMAk;vH))TXEN=aJ=b?8Rcr|Pw<G^6nLoxeKw~7U=
zT-V~EiLQM46MmEL(mB>=&-G&~EP|w$K5HU3lwn)b9u&3~5s%N(g6lXwbsT-`r@qQs
zw>dY?v|e|%#pi{eP>)DlT&WxwLr~lOm7AD65ynO{sQ=kLG8~2}3&|TBCAm_)qGXbX
z&+ei_{qR1$WM~6Jde$9KDLB#>CGS)PyBgh?<632rj0el8<<owX(yLF{qK(*R4*I0`
zCq+rf{8UJ5y`QCKhJ)nJqJa{+L1T?p;L~o#8%rPCScYy3ncXoXN0<KL;OJx7eu=0J
z;pZ3=E)|d!h?25dWD~JZTP+SltObdm6e_@)Y|0-I-(XRoAV_5UoGZS%KmjZ%*z{Q!
z-NQQij@eA-4X=|aW!Z_Fw~CXFj6Uhv3oAP>@W%N_B1?~KRv>s-n2m5a2{_?e!Lw|!
z-UrXN!q!$!r1^6U@!M9em&OqA>46O0fT%SSfGXf#YgFV&ZyvOuerZhu)%Y$<iu~}{
z@TzTrN_2w<9@ON+kDsKPtjSjK8B)bR_g0!<d4AS*E$)sMmtR=+APk1N`Dpu1e602o
z*W_xRKQMVl?$g0teShAGn>kc{|3h}l{<B$_BT_<3eLc7)nNzw6biIhL*YL=N5?6kh
zUrs5Xexdp<=-S2P%QJq250bgaC&h4Zd5P{kGRst9UpjL&i{#W`xG3{_vRVDd7wgM@
z5*$js(^JI}Z6&RtSF|nIm8*m|KDs-b#RwU@#%_(IgPr_pVd%Dk#}FrvFbRVT*dfN^
zw{Bst{$3fvPN57-@e+mV?mS~Jb9`Vc>1`Cdr?!NM1qIPw?W{>&x7RBA^lyyFOqME#
z*n~k<?zsc1vmu%;zz_61HV8g#Y!5g+F65koe#fbcQ{ETg1J9ZcOKt};@k6wMaGr!I
zM0ulWkFp<ov;M_!pW9}cL_<Qv30}LqQIov^q6?^>2Mid>pB&i7$y=EFZMO%R9C}<n
zR}M5j^sZmMCBJ&udjwsOM6!q|o8Y1BHn&{-OVPNr>2RH62tOl&Ue#!#5Doi4J;(_;
zHyR%Xj=Yi+IQx#N^pAlsC||l`F{t6yfjDRv#=wakA>hwj3VxprDd4uy?S|7FZk8S#
zp%_sUwtKOti7dJDRKinhRaxk|nEO0+B4;o|zczv&y@K48ROh>6`N#ttMO%&D9bO7A
zuPZj$i?<61864}Q#p#qzXij7H<nBH7{4$(9I=;8A%u#yKi(YE&iPxyy`c+5yEgq~z
zyHypE3A~9)Fu423ECOPxP>_Wc8B|F`gke8FQ%-%RuB<A2Q+iNA<bno46jI*EEW59U
z!8SC{y$rrhAE6?InSsW7aSHOTwcbF5UMT0D=z$X{Ta^-uYgv!OJ1jpZMDJ`z<7JG}
zdnSoECujmfQ7{Ew=hha=kqnL=YLZi{wI=5bM8|4@emZ(|Xzn*`2LI)LhdPDS_{`2Z
ze88rp7$|S#aDRC-KcgP3$cD#P`T0N7-iMB68;<A`4LRIE$jTqVe<-ykf%Q>?3x}u*
zp_^d1Nkzp*J&gF14xrWm3$XNe(Em^r_ou^Ri*F%%x-U}lb{=IHB7ojCxt^Dx5u<OX
zL$(-#frrxyPq(R!kT-O#NEF2x*`<=x@0V!<CAW>53;lBsE(zjw(xKJskoVk4DI)lm
z`qr>oZ|%_Ag6b4rEY+-3l3K^@?7ffw#KB^ZGeICoTM92J*bwvGJu|aJ?}f+HQoiBt
z2DodckGc|vXZH$~6`Kzf;&yQjm00FBSj6w-eN%IDC?XO>cj(+UL;GR!l#HgQ?|$5Z
zbx`M<fpGU*Sw_`8Z6ZD}>j&2$$;7LXd!g*Aw%6yx>y9|9g4KhXs^6eFt#K!eDtT~5
zgJrm^z1FbhI9HTCpxt9Hg>t|>nm|rbc|#XP^zeB0cnv$?e#b*B>g>hZ?&1zQl`*-o
zw~<}u=?wHI_1mne!F}gwGTR?R#Ytd%aKz#s+!7;mw&f(9hvJ};boorkg)|WCaH)Oe
z{P?q81>zDQOhIcUqxbdhypC*}D7aBo=uQf=DPDurGd31*Yye-tEh9_YFh*(t_^bk^
zzpgHEc+>!Miu&YAmFmP8`LeGFX-`|WfwkPDbv3$S<5_h?yGh31!uY%}$={%pvq7nA
z==-@<An|bFSo)~2`jkFlg?W42=|ro%?-d}Pdc6LN)tLKinMSj-`>rHvM2}hy%>(~F
zXfCt!ToVX@?S=|4@oX0#&)iEu$MGX5>99RAo`+#}QE`D~4$&hVL;b_q>llb)P9(#;
z$dn!PnGERH8R%BPkR@W&B9Zn)II?RxTb|Q;bIxOtq)|rgwVITxU8R_M=`un+q)S-+
z`H6Fx37hs&{7Z)?q~3C?q}J*xrDid0tEiT;+eMCh78k`h_C2g|Xr~Z9>4O7_kh$YS
z=~Z8ffS%V@B`V=Sz&24(skjQhSV-bkLZ^aBu<C}B@pL@rrfaPEkSgu=muO2`n7KZ<
z5r_5En-yd{(m!_|D7Pv~f)C-cxK=ZA9l0D^S4PdW)Ieup4ghP0beT_raj>TH({_0h
z5;kNghs5{Nlox^QE3P8qp;?uSL-Aqk#HKQQLhCcUO~f<*uVupo%J^9UdNE&ZDN7au
zE*W<G9h}AnW9XV=!cq4H=X=pD<k^}Bu|<MoGHhLCEZ3OoN1L~I5UwMpb=$n_B*zTW
ztZ})|_2{KHNO5={OU^M6HHKSANgTU=Q7*r~b4$*Eh{=@L%e#A<Cmkl0wBC^Z3c!!|
zJTDr>eVr?%*|JqVwi2h1rtUw3&5f!3ZEcozH_CC(aw(qeXdMZ^_bZ|>E#>WzLsP1I
zD8|ZjY4pu1rkdW4TKW6%io1DQL}sGF_RTzxSq%-dA_Q|Z@@eoa&@3|d@YGm1>$3XW
z?6$m=f6sgf)LT~grzjajL0seHw%`^NUz-?s=!5Zo-xAz=lTC^g5~C2PgXX3M2}!1I
zzRHy52TE!>lkQtNk>ziu`Xb<;))x2VjTX|h7(%r&U=7h%Y^rRp^?X4=ws#m5|F6gY
zkB9pI{qW7g#L4vk+4<0}ZW)8yg!1CuWyp6%h8b?v2`cCdlt+mbNj}knhlwQcMRNYs
z7j6Xa_v&5FnTchO$6Z$;z_7cvvQ?8Y{=5A52KJo9O9{5H+~FW6=`gE2{!BIgx$z7Y
zDHv<lDld|>>gV~bmF@C2o6CdawvFJq!orI@LZcv-Ic`mn6ulPy9cbF`cX2-QIjGfC
zD6rM;dBP6+DX(EZ2PJI*T-iRImayE^YcQ4tHWSE?2kHk!7lQp%FRzD`b|U<r&ZAQ&
z5*aCnJe{9*(`SsLpIx6!DB<aa(gIOOR2oDzIJyT|hbLKX%je;-F05;lP@~Z?D)BYB
z_-L{Es<$VPROEA}(R-zW^1a-j?sce1;`S;Ywrul_Dk3LK`!|01oB`EFRd8t%x*<0(
zr`ohBaA8_}fZ<OR(v&om2H{5L=MNY5AoH={De7k0@(odTYN<8I1C{ZLt^vk~BPzrR
z3Nf(zl=-~q$@AUkHr`vIVoaJi^Z}CztFaO%_rnJ}A)}@$f_Ch&cS2vjN!fOKHc??3
zG!L6Wb}kdCbSm{(52`;s;b@of^Ay5YK1o83KcZ0)_SI*NUVvmY<(XfXSVayn;#~DN
z$d2;}CrT>xV3eg_o9<rj>t%*qgphm2!-Q;HmIZOXgv+~_;a&PoV54OT6dnqowFrIo
zE0r~-09HBqXROC%=5tDHVeb`C)J(%2v}Qx(YXP@jSpU2o0UzL5cZxPa;lAQ;qNyJF
zU@xei$2^DAvF`fZn}0>%V~C)(3DSWQ25K*@1$z6a2sQ_tQFjE6K_ITTobZvDHRYu#
z7$Bap`GH?1O}t#4y<#FW4$KKcRJ5Qf24a43kZBSq4OoHjgM#oXAk-(NPe$ZVpx<G|
z&`B^gq1*sX(nJ5WgP0@cP*qQ)hlKc3X<Kc#0=c>%H{8`(d_nC{v(x>jW80o3X#{F_
z7l?0S@AdslfB2^-auCQU`N@Xl>lCjh9lr4G=0~KvuxS^ni1-sxSc6`fq{J8a93TJJ
zP#kzh76sC;PwHYkojev{SxuK>-PE$2rqIfklxZrst|W!vF@k?waY-fB5hwXG6swVv
z)AaIusb{I}D35G6`0*-H?rd}J+@1L>Gk0E;n<_-R*?gkguvY;is4IuVD?I8`;#m9-
z7^Sp#x!y5B31kE@<XP8~-_M+@q%^TFwu%Pvmc9<b7yB?7rtMiCt0`3xOA;2Lm6p-B
zL9N1E;8*Q_f~x)gr67?M6)y8=m*hGueIg3miV|DOZ^}0@n$cz0B}8H`^!bMCdJ{EE
zA}ye2)VXJUql<?sc*Cv6=K_iWr>=9$aOsCRRXXBNz=lZOuuPB_OB);M&6Z8>60TR4
z$-O)*wT35aI^vU9w5kV(GqhrF?sR%trcBb(1ZSV_5mkGvsP#p07YenPSq}C#_V?Z4
z0B|}eDTh;mmdySIe>mjY8lRRI?y2dRurnsj&J{4}yEGg&U{GJumrj=Sl$-snP>q18
zs9M@lB(e9$5fejIT2dNJ&cvlz#3*x^Bo~r2#;VCEZ4hW?evZ?xt$B=%?$ITf&PBEe
zt&HXh7)xIiV9>;@6Be~0Qc^tG!aJ(JnN6o_W2Cc$#3U9Ml=D63yM*}|q}*vppj6N_
zzey>_5Ax_$OVIMrO^uDt5jh*qCUvb+L}^J!%*RBs-Fd3>Q6EMF`O3`M3sg%NJh7ab
zWZ-T$hzT%|d^DL$pwP+K;EDxr#l!}2_xQWK`Jhmc`Cr#PzPC_Hv#0yHnaAp+8qh05
z9$?)S56U@rjZxTzQ*sVCM#*V#9LohrbaSs^rh|NEyu!2@cP3oG30Z-GoMiOga$Ond
z>TyQgdZWKSHN@5%cM+}6ku7Q;@SH*fr#oBVuErVtj_PziYb|uNwMPBxTx0+|%OcY@
zbFPmlRyLY1x?o4_+bx{N6X>A;#YmwiUfffNyIt{V&h*_U(X!P-Uad>ZVr(J#yiph~
zylTvRiYR$wg<RIQRx-L+Yv!$BjUVCZ<s7sj?;FG_!>n(t5vC=309SBz-1s>IH{V5r
zRQi!<LG#sqnfCOaE?PH%=X@3}n7knz!%j>Eu|P@O$)C-tBi*a$o4#29bekCk5gDT{
ziaLFMzA7b+M!{%q|HbX4@*CJB202uHf{MaP$+<f};s-MrpQCUkSNU8t!YHK1wGu;1
z9hIXPxSV-ZxU(W<|1Gb^A$L>iEcr+;d|=lQFuCVWR80-XZ&0*10rW^WVv6b+L;4*Y
zkUU~;5Na3FBvFzSC#fG|i>-Ox<n?fzR2S1(oZ&Ub+u9N@n&A%AU^ka#JCd5K_r(}K
zVH=;-%T4Q!sAZ#RR5xMi_-PiLIT^LT4x=7L4pj>J!palSX6VhFIE)BlYST&(N6c&w
zG9$UPo!KN5$q_E1%P=vo4IE7;vWu0d>!+ga$aO69#*u2GqfX^{i7%(2928MO4=QoJ
zrBbwu7j^lZ1gEZ{%T&KR-9P!&NY*&~Mgd(|mcU?)HAR}sz&{h<oaTGB2U$=!wUJ64
z_clh}QaP&12Uo`#5LF+@4GQoCN_qQNgY&(Evgq8Yn{1Kk;lpXzmP$RXXbI!woj%WZ
zo)At;o;aQav2m9cVsMhuA*08UUm?b{Qeh%H=F0((4IRxHeo{g#u95;x23(>SJ%|0$
zo?oP%J40!7=o|+U$A2M;L^V^5f!GGYjlp$VQI=6uR6C5H^RMsmjm7Y<dp!uF@&tV?
z2O_Rgw~wgR){QS<&Ob~i^^fS@sI`oO<hEvPqjI|ZrZ~7RD4gYF-!&>UVd%rJ$s1)K
z<Ae5F&ymB0lM)oz%nb_?ldtuSX=R1~MFs+h;<ZF&AyeJW^K!OgT!#2u1WB}BI1Tc-
zaJ-&{MIO!qE~|@@QrEvQetNf1yR$fipNZ}?Pg<6k)y*{pP5A_klaZaQ7z33#bILkQ
zW8WWCc;%rCI6<?EnhIw#O3DPkmM-0Ul@9PLm#o0a9l7Bn7QPPYyN?lf7I$n`=Y7m2
zw{CKIe87JIQ|mo-<j-^`qx`y7>oA1aLV8g3MIC;gR`Kda-gYn8Ddf{8<iU(pK)USL
zc`n4|xwty=t;Q17J9D)Oa=AOxJfh7Xz|pt^x)IBL1#3?YOb+uGiV~%a7bor<WT{)t
zvIKbTw;ytIJlj~D0MZLB35NhfX#}j+Z~k%$!9`Ap!32y=Bjqkcsi-VS!LY|<P|kf)
zW@=8Pecsnn45RQmT<HtD;JWHCNHX5WWsX1A%+$VRG177tN=!<gNYB?0X33jEfcDpO
zOs@Ll?Rt_=-9w7c5;+eYpVI7SZy_inTXJh~W1(mfzl=3)qc6432Yg4kWg1taWJfRR
zSUxhTOI>5q(l~GTX`x|^t2)d2;xlbMoG)e7S%~99_Ha~CS&;Pko=t<i(PT`H0NF=b
z$0HvEF4>bwBbXgNpa|?+hp-93)nQUu28#7F9Lb@ef55%o{TQZP7!WTML5AQ=SW6Xa
z{}i-GKRDdh^=Qs^{Kb?g#ksdMOpFa0!kQ$&W~YW4n3xi{yiwh97xZ1SD9n0#tF$i}
z!lK@prk7}uSE40+*8ep?gbAu^0JC;EYtV_Tf>8h5E}YGWh#5nJiAkC4DjiHU|8$yC
z-X>-cHphCe?pk9<{~)K;nzpcLJZGoz6Z3E90i<7mmrcEz2+o``S0_$l>*hEnI%DVN
zgX<|N6l9;Z955xMESGLNM(gWLzTpS3oka&gB>Vhk^KwV3PI~gHDaNIew(WLFn0r$e
zEsc8~&$DOfjUW4zQdMe}Adq%O$mi7BIa2x7B=;c*X~Y{lWHKqJ!D^d2on(w>_|2zX
zy$wjh{%P#b7dRK>#h#iaPZ?LfpGd}wy`)HV%$p}f;K4o{bDm>YtT9RY&~R#fX=F>P
zI;v8fg6FMlcyIcs?lHeg3iO$Csx?o1R)4iR(1w+DAIH;{3ys*%Ck@Jyv$IVLrh=sj
z?4rlj%${!JktLPs>tjo3%)DegdrU6|tl7LZGF0O*+51u3okK#uZ;<}MS-$X)d{|DS
zD&$m=Ig#uH(l==X5dOY)OA8!r+C*!uSeJRTvnJ(kUpVuM;6B&d{G{3he~A`#h~~eb
zUFGZ8n15~@(*TOBo99AvZ8jbq6~vw**CU3H2@coX;R$=>;OMc;ZAau{#hPG<_MFJr
zbUKYybDDYhBOA?FdtD6V204`T61Ahw%>4^)j1p);*WFL0ZpCCHIwV<6*s8LWO-Ge%
zin;h+a@Ac!R4rLPiK&2-UR8k~KQmOnX*p|9OPDSjWAHKF@BNyDckW3V&~o3)FF72b
zA+c_{MDfM~HZw~>(009m64Z<maP^lwK=KEi3B%QqiNf>ESoEambJ1Nywy<-vxyOMD
zTojkfF(!54zztXl8~RmG@sQQkO5U0-LAy(>Z<St*(-pThVc-ah*x(nGl4DiT1a4r{
zYqZjk6S7_st!F!hC{|k8(wzU8MUZu2aHj&OpCA<(*?7Nx>99*VU}Qwxs<ka2v<`AS
zIt3~Qg!yTUkM5caNcYqL*7pEaRTw>*kkbwW4U(17FT#@5Hv!*Q7yD(++~CKa@hGsD
z?s$0_wu5HC>3it;1$Y>1T?hqhzPAl^a|}^PEcirQ=`k<8zt}i1RX<p>!SL?bcDLF#
z?t_d-E%RdrSD>DIT;mFwf^y#9{1N2LJSY6e>^nB5&^h|ncj>KNyI&;uTb-|1vW$oE
zN~(Wi9^PL_fD4_<K^bw^<l~*5ULaGyW=zpNlb}T-HVMSYxim1YscMt&{5h|vP00}p
zoq^%Q=0e(~y#}$ToO@6ykglUa!a!3MUsyO-Z{g7PadYEC$0BY#XTaZ;qn1>Vf8$A-
zis@T58Y5I^mD&=-gucLy=z1FqGn#IG_^oWt{)tZ<S%V!H;ZTrz_x2K^YRKSMo{AP>
z*0RNGPQ};zmmiO9KtF6)CFQT^`~BHjq<*Zo`C9q|tKO6~ruAkA{etAS#@6!t(Y7za
z&<uyE&H5aI=RpBRc#D@~0Q}%^K?w?4<H^y0v>_xuXq#!4k<z`*Ivjn2h`Q&hhf{5*
z9~73iktxOdSnXCP`H9CM0ijX3GmmeAr8{p0GSyF2+uzn%HIP8|Yy+<~Wz8KYcBZfz
zp7M2L$dZHq46tx!e*2<^&K=d}L=jULe$^b5TxFNz;S_zg$t%G+shE#W;~LHg2+yxJ
zEp%i1VF_gFw0HUOr>Ejec{u=md`?KZAP5yN8|XX@2|@ii=|TY%3t*Y-%1J|{1UYTR
z8~};z{yIeNIj%2s{WREr7%flz`g9$F&(A8Jz4z2EQ$AsyC<2>9w-LyZ<6{><&Vlnf
ze~vJaeu6rAGsXxM)wN|u^obC=xu>p;YH8Qr0;SWtHd{>w#Jeg`LuP~(2GLnr{7DPy
z)L$zWy3bP?J_xu)Za?wH$ZLr8Gk9faS84L5>4BQ7Pc`e4laa`AZNr6;wwL!W@@YU*
z9-12*MrNIohchzIRz7KWIU9BQ`Pg$}i52$4BPKC!iG?p@i?BjM=LLmQtHMRodHp%k
z<+4i>D~<STo$CJXsJ+|}ThByl-yN^M>7{HlCDi5#=5HO(2Ht6`%f1^48|Gt}-_hij
z(xnBA_J>Uvx^o@`UA)~B73b*P+~2K7&v$l5ey?n{CF<SRy!6hL)82YLxqy((D<uD4
zP{_xwh5rqOFtf2R|9_y6G4++`)#fjr=hc%1%YM!6dU(9d(S9`g+{^)M&_;SZEk>CH
zmJrX+Wx`6Rl!_KkHoi0n@)dI=$Zp?C$|sb`xuSjYaXzD=%G2xZL{yguGEj5Bur_+|
z@{WTeGP~NOr4PaNWDcMWX1%&ToxNt9>UQp3Zs@+cJ>9ctg$Tf7AEi!TgM~vb`%QiG
zcL^|B-8mY?`EJr|=$_tF57Tpi!vFT@cwhW&)wZwsByxM~+0aF1uw&{#z~^dYPs9%q
zH_PQdlGm_qq)2v#JchjQ%{=X(np`v3;8foT9m;AV`0R0SmcR7+n*XrSAC}JP{zae*
z4sf{e>rY9HX<q7YA0F!6E*}@QvHO^Voa{GS_j_%+XUDfZj$qs73^@zIpJ~yAUvw5-
zIomz-CN5x%xD9B@<d`|WQZMopcxi93&R{e1UUPlDtA3CVL33;r1VhF2<xYy8NYOQV
zK0b_Q))C{!%WRBV>?mwdM*&1*g1WsW7SP$VnGi6TkIHVEI6`_F2NBI08MBfQHRC15
zj-*fz)LI}e^VMCmgiMSPw~jDr<;sZR-rf_B*!II3^OQm`P4xRr^nz$~#SD*FPTJQ;
zZzgLPA!cbxZK+{)aEGi%r_zuuJkAZG#9&gEFNdeJd+1uzIN+gi>L5%=d)zZY^W!8A
z<pg5yV1QN<wBvMlhKl>rq45lDDa%yy>@+4MGvg6P`R<vgf#g%@8a2TMmDgw?*2cRv
zIh5lmaYkJ0Zx6Z8P)c(hhNB}V3dtoPg-`l*!??s`*kz<mfv(bOm8Cs?5?zy2Hn_Qp
zQXIMb{F_@?O&NXNhXc9y7Wp^|%Yf1{f?8|!8}*T04h|=|>we&98mIKtOrY%s?03V8
zLhgNfk}RXpewlIYh!-+4CWDCQ!Odm5--aBxIsvu2GCuusx}`+FQC?RTp&7MIx(U5a
z?27M$#iGx7PYF9Pc-$aqaQ<|^VzH3&hVb^A#84Hn#iJk{cc2oNkm?>5d5(#9_KRb)
z{7yOKQ!_^crH82#+VCobZ_^2sWM6ryr@Vj*3i>Gp!6givPIC2(g$$v#1DepH>9~Hr
z!mJ%}=GCTDE77~f(NYf^5|}P+pJJU7%iys@+6}#2@tFi#zKu>t=<6kRim!uN*8zw(
z4jHJp+Fh<VCR*nX)fB9D@2bCs*KTmpw1`O?NpCcV4)jo@4LI5SA3S}Q_RK5GEN*mN
zM)g2^#yS}HP>q$9;Wd%Md6=NU7>V+oXNmG7FQU22kk+YX3P*C-yGw+tPcVG<F$z+k
z=W($5Rx-2xdIR^5s{*1!RswaR)QZ#HBubo68L*s#9w(n)qLEJNrRm6GZlzs_rl2K?
z?k;y(B2az7r)e~mo-P-vOKeaKWFRFSB1qaW69$8*S#bsWIwY)XS1iq&mlrM|uC@F<
zrhgE*PW99`mqlWgtbU$h+8RwQcaxh7#R9@%a;%x7DA0o~V=7dGL;VCIz$y~JYeKM&
zkEM$#jJ{Y4euXbbvdAEBsK^a=0C^40Ev01oBr37cF1r8&dknCNFi+LOon<e05}PfR
zVHZUdAr&2)Y@e!$rtA)E8W8CcL;Dh^I_GicuZ;UC`#XZSXWKx1IwS-{lO42)TxPg^
z;VmY4(JLhG%kB9AC~wM%-o;Vcu@4`zzRJeiF^?IO=^C0Y=Hf_5SfOA%tft8R;FLd4
zrSsb*xE&Wu?m<Br^;|jSE$Vl8p8(dh(n4L#D~0Nx#dKY;zs2s#=Eb~fP+V~)G%zMK
ziYH|EE1?UKbx1Wip~0j}vMQbHtKcAIg+o}JebpBPL(Od+oEXVW>a=p@)YfKc6__hR
z!|De*nS)tg1XhQhksa9|i7-+dX2<EC1Il<)p}^phWkv`D>NNELk%&^5F55<&r>A1y
zL^BULIn&BDS`LNuI{|ikbF@5}e%gpmmd-dzJz<fzori3933Q5h;T)?|L)NE*m|j1z
zh63<sZ+Oo+fM9!iO{i0lx@PR?MpZ}b-`lG;Vwo5Mye!h)#w^xHtyt%V4a1}@ODOkB
z%IMv?P>+%u&gnQjP-O^937Xs^l16>niVT}r*n+icJxAxk_zUV-MQ6{EHv<weS#2g`
z)YQrB>-10jsZ(QJsh~BNu+2(MF>PD(4a(f3uYyI}SFh}aM&wEtnaV{(wy1Sn0_TqZ
zv9c2dO)#ep{(0a5lkHy17>Juv@5gdt7u6coNy5dTJAg%xmRn(R1+_pOR3)-kduWVX
zehzW1Faj@9x44ZfmA~cB{t~~@#T}scJVc8J@xw(><)^lt4ZNiYzJgh*!4LSG(|IzK
zNuoOvA&)r7Q=9Ni!On2kNQfUJ_Q*TqUs55Pk`|*Oz9HwK2-mYE!S2@TQY3@hL@g0|
zNpqnfxaAT<EN*0kEwX82F2>UMqUKQnx7|heTIk#GI9D7r(+v3Ue}~jvj7{+1J}RDS
z6_YF>-LY))NT)Q^80SS<(sE$A8}N8(&zYlONRC0YJE1L3YU;3PTk6O3usRm{_t|o^
zB8lvhHrJJ57T|&25AqSY)&+_ij<jRxVPU6lcq|Kh#}pC8T+`Xzo)PBiJ0p0&)Wo<O
zvX~}m!QSp<E6`h=I0>C{)Vx$Ux}&^eXW<3BAscIQ3oqPgC76>_tNREP&qNY4$%-Rg
zxo7clo%<^s0Pd1BSIcMNl_2FEFk;nf2oLP?ehigy*an;hxya;`*!dNoxdak+x<#e)
z`(zk=Vp;Qrm~ZJ)BhUS|C^?s7?OZb8hVhV`=~*)<HtRGV--CWB0?a(TR>HRkB$d>D
zItwB+KVrsZiZ`mye>B49(!E^cyxH%DG^lPSz{`4OEg9=<9Jx~Z_UEadg1$U20|6wd
zoLS-o*Aeaub{^^j2`Y8^Vu1v_$-SZ@a7ztwXOrE{>l=!PaHll^oW;?I-=V~K{GvJ|
za+r$;2Bf4Yo@|U_!}W3L@)2X0v$tNtJydFUr=kqU&Qq+T&l$eK3PgCFOVH09C0Y?}
z5k@U{QAFJz1Y-7X(d8wlS2ufLU`qmvKnj8YO5ZKebU2!aNw*8(O(w+)wk$K~*<(5E
zD~bW{(soa@n_kHGO=oUJY0xK;0yMa~`4%U=b+15?jt0Ypdbp6E6`SH?i4yZh(d)>t
zxAXZY)pg%{&9?=Qh%neapJf(g96kG%s<VEk5_-l~hKk6)@@c?>E?$r8t<>bb|5js)
z0aM@K6Nh>?dw4+o3V&@W|I|_XiA5TtwNWObE!E;&jZ*lE({i@eJR^c`C44cuEStUN
z6!Eg}j&GkYAxN~X4Uc(vQzEB_C^#^m6ovatMAx3YvRF`%bgWVqypy48fhD!3h_=Q2
zTX0vtd8)sB))vuW9Mj68m`eB$=E$q~2BT0g=2z4&CNHGsW3zI2C~3Rj4hinQ`FsnF
z<RxHgBZZ*H1eOti%JxrvKET;C%0Kwc-=SO&9dB*14^<RPt34T9d-_=e;`f&)MlPt$
zz|j>?_(FyC(37cJ+I&5OrQ*#ls3n}0;o)Sh?&OT-<Pd|b4z#bry6~2D$d=wH3nLKP
zn~g(wL}=BWaQl{GU$6tegA@j&qGcn|>W7OcS2xW-ib9CO(>t`P#X6u<pJU(R^0)<G
zz3<%UGi`>mpMZC&RJO4x*qwgBvb)FL5TA`YCq9{ehG<nk;UEOQ!CXif%@W%l<I`r5
z`H#7sS;TsgT?I<lh_|Z3_jJy3&kHaTadCa&LA#^M#oWRq0k4H`NO4A{S~+t@IHxpK
zCj=m!^SbpyeM^UGs?BNBl$p29O7p8q!X)QIAjWgOJ%n+E<(gw=Ae;$(x!FTR`c?v7
zF_;RFkS0W<3K@$xe0jD{?~D^4R4^8Zx0K4ECui$SA5y(OaMFmE!|a>cfV=8Z%DejW
zmh#nWrN^Jpv)~UnKO3*l{Qc|CT_s{?G`5uGv1j=M!d++m>Pdum038s!%K;-i^(T{P
zbUhFZ*4QC$Y23YvA9WE5mn@vJd|RhHgJgeC^6CE(_KrQGg<ZC2*|u%lwr$%sciFaW
z?Xqp#wry9P{hpl8?c8+IKVaoa=7*6r=g@?7C|*+@L@YiOt;Edjib)3QImIlHO=b%W
z_(t|5eO{juWt6BL5dKhMdSog4Pr_lR4pOxAW1e>+0kvTzrKyJTMX7y<Jm+PiygX2b
zbJ{~Lh$wd3O@C<3&86A+Bvz~MNB<Kx5at6x7NBua(^^j49d4UrgL#5;L|?)|RF{aL
zl<h-450t<}%IeH6tCXV<#JBHPqUK<kq8Gq#AkPq<yyqg7eWJY1tKW}d+-xJ)L<!&~
z=W{a_Glt-e3NN9CCJ3SF$wP3(Srg1T$@|!L;B9pHDnt8hIIK-du?Mzk{fRMEw!tU}
zD(M=bWpcc5u3yQJ;>xAsW}%P%esUPvBH@MTH9A+ANY&JVwseyOH)bNmF=s%Kue*Y)
zIa|*8O_RglcIUl&UH7h&*f6!N&-TNddgGhBZKkX_b#jXfnJ{MU9ONwN3mlhnYq*M&
zChHU2X~>ZeMrVq!iM(SQxg9#R<?MBb(yYaXcC#5dbKZ=k{pw84{+5-Uxoi}0@u~ez
zK_g^sXP%>m$V|?~eHr#L)5ikN9U7H02@ic|q9z~^POHyIrJqafu(=^`?jdRw9OW@=
z&Gt3I(-vOZ#dYYZ3Qte2oOPsThrgUEcLLWlg5uMYhL*5D{J0i-bAsT$r9nRqVft#|
zm+%;lVN)7MkX2h;{rw|3MGZ?`JUMdxz~HzP4u3lr``S<B`VTvO|9w7${uVvc`T?ie
zei6<CGIFwiJWz3O<FPcvgFAaQ;#}xFo*N0@oMS#%WM&3+(%AA<Ga{_lV<C}iZ~$h0
z?vBUGGF$rCa?kSv$pFx2iyr$wZJ_@x`s4q_5HPc{{qGy7ZroN2s&Aftfw*jd;oJAU
z#cf9vNBOl!*&oJ8AYBqbs7(puV!>bES<;FG3dIEpJc1~I`>ARXJiJ`*oA$u*lc8w4
z^k&$&UtZiEygxh)s3wo%&TsO>2epNY{Y=-`maM#=Pn<tr?+#2di&c4WaUR#l?+!{+
z6zB(eowJ$NCp0^(Fq66b_*(mMr+)Y-%1GYWw7Skcw|{(H`55dbx0@lR=57Mo`%fTW
zBpC`8IUh#fe#-`rv+NIw$j6Jz&<}d$!B@VQ_|?01YbRIE<`bF40eG2#y<nJ~Qg973
z!o?r?5|G0~l}BSCGjbS4W1(U-J-yw$yi7)8apD_wxk))Uo16>89}3*K+!ku3Hyk6^
z&1-PUC275zf{NN@V#}?_zq^Wav>TnRucOD-i*o>Z8!B<zD{<ASUNIxVS*}syjOEDP
zmLz!C=8M#Zovpp>{^lm;*j}8!&zE>H@p{Sf>dm>$YVzhXAG=q8n>S|QDyzq7D$h=z
zw>Nu<UD+tj`r~V>#_6iYQ8s_VEEgRvcrO`S6ph7FFD;4=JUteA*~!jMFDo}R%JTB^
zFAveEBR9f(9D7!cGG|++c{vP;$ni2xE)V%QyV=p@CT80noS!K!4^^unJ1dkpovtT<
za=r}2E=1s#&~NmQ_6H4ux>=Bqja|WA@7Yw;C6{BxX~|Bpo0paSvl}Jwa%MF%6PYLd
zXF${LOIAi;k_TLFKQz0L#X-6Yjxy{29%HCl?)%SU*Z-Ma@#3QL^rRInJvE)wJ|Fk4
zV)m^f9IlL+mCUy5%D}^QdwcyQ%973ebUcpsb9Qrab(`TAm)#G^tfEeRojhl#WX71|
za&^&4;KTKLd;RIZ376*N;^|LwS#xSS&JHlI#ugoHk>>V^n3drrFKa3E@ba>w%a6~n
zJ?p&9FBfP3IhOrXqc1hsC=eAGYNNB)*;xy4&w4WegKpuepV#A0M^|kzBOmtCEMYyb
z*sjvV_cPHQ?U(YP+Y`~Yuzl!IGTO-=6eJzSciGuZ4^AG7DhW(}n}@1MOHPO*X?a(N
zFw_@PGJ#o=G<9)y$zc#GRJ+*E*K#qa=wYVq`ZfCQnym0E0;!QjK}zI%CfsDI5t<)E
zx`qXoz$Ie3+0UmoXUN(b4R6lvlqQGJSPg|P!O`|nI1Q&siusXWfPofx++(=oSwn=+
zk%2VfYJIp7^SsD=poBIQT3`Zt$cL&*@E&%9{Bx@;JI@a3@1M|1DR&`Xo12_(nd*+8
z3r7XT?f306m#y1lc~<Mq>l+KrkGqi8c3SooqFBM8#Yro%{8rm5f`uRHENB`t%-vE9
zNA&1)9~#p5l(-!E!n>&5tDq}!SwY9wg8zp*H`vyXE0+fPdiH+BkYEOS8J#MQbqUrk
zNqReM%9*JU53@jtu;9aqjHku-7s4gKftMaoS=m5OQEdlOhM5-#%#_sN^pki)>+>5z
zE>;OLwxZ8b#ejR?gDvXBUc94ul+<YpMHXRc>9qiItjXEpCRPIa8eZB$2sDQ9{8q#`
z14mLKGx&s;M8x5S2@gUj>ZcN{TTmq!7szvqP9f2m?5g3<PHH-nsIUyGtho#WCmnlB
zCd@b$8JC2XDY%D65SH_`Z?MRMdL^9X?9Miv#QOysL8VT1_VNpzh~mcX2x4B%H*dJo
zxxIL@)%5Jf0UgaaYOB5mkg<8zC>=wE`;}>F;n9-OtHC%fTECc{48)$2`?nVlXz9kT
z-}m$4FA;%FP!}5*3u?nr;+1h3uw^E@SPkpqBWbhB^0V6V^9m?)rW;EH!kPP^bMmZ|
z#|Ej#D?NU!#7?2FUomItx8rhm8LV6+$J#Y8xzP`GpKh@$e#$e_*dEjMU{vSVd6+6#
znQtv{`{)ewh<yVUXLIF^lDliVOWE$psq*N>gaLZ73h1uc*?j9ssk}~s;s9%|r!!|v
zo#sUCEPd>P-~{|OO*5Z&>7gF0cWxb<8H|b9$K;g=D>ti`@L^$~FJ`B$l?Zjbha&SK
zb&<6p8*vilsU&_~Bsn>KsHE0KgI_OguRtH|!n9PFRV)C9I_GnDCwHPJ#KfP<W5>lx
zHX7WW{E6l(rVZ1Wv{8RF#^I>%Io^=@DOdvFdjy9V289sY;FoG-qm|WBweMF7iovRl
zKapCI41a8ln~n>gDl}(vZiW@-Lrfw?8t9<^rOPD4Fo>%HB;&^dQ7}nO{cSrqIWiR9
z2$g#s<fgFSLoLWo@)7W*qxz!@5nfQK9H_X>2?#iQjJ(3t8nV4E=D6dSyy5nFqq-W0
zECLkGJZS%85&BvL?1~&>ssp%<!Biy=Zh`G}-ZRfBM#BJ#O}~=Nrl8s%;Q$}<Pl<V?
zOcy`jDyW`S<6c2J4ZycIBX-<VO=?S_NE}&dicaf`%}$IR>}Ve)b#9%-4zGNev?eCk
z^e1I@vab>U{v-{j>cD_KLuB*3Yt<J2DEy_$UB0j0d%|gLk%;cq+bt5S1whf=k4w^1
zd<-MxS=p6AoeywpP+a8-b}&pX)@5uII%41l9G(_NDwnHr$l$Q3d#YKShP07<s{kV;
zlrUH)1|>DT?ueNXopxktHx8lI{&&ODswaR`JXsloD(5f~3=B9L5Qbgd)<B(tr?U|y
za$4GF<Pn4`q6X!C?a|6BNLhO~V}(c{oRbBJ(hw)xr-Ez(@l4J`Ck-x}r+o@1@dh^U
zR6+kReZ;ZQvQ8wDY1OMZ>OjvD6S_mvRtNH75Z6{maZ~!LS7UiJ_}5iDfa^JBTl;T|
zda+`9U*eM2<XraEhl*q}Iw{SYfeno>bGM9(JtfdWvdgQykHCga?`Us+fiLpB`+ShR
z6UZ@xYY6<%rwG`c)2QpfaCA>k{joKy;nE{`M)j2qP~3o0Ma;u=PE3+WzsXHEH`k`A
zH~;mg`VC${T8^ykl?^(I1!j~jwJTfa!iIz4v2tU#tp&pBGaIh1uC>?m#15IWy|kn<
z5nVv5vfTJF59M*EU{kgwTxiC~gu+>dT#~T<`Bo2Szg&$zrCsE@hJAgTcNThiY2Ds~
zwWkikUrY0vVP`$axb&H?%Kp`V*=AhOz}S^(EcW@J=HZ=B^j83Ao*ClCH8J!$#U&g6
zF4jI_kA~RJD5>jsEhYZihpddqGG=5AiF}q70nr1mmS^EvN#hQC7`~V=_|y#weWp>2
zuuOA9rZG@W5c(`AM@u~g1m$I+fk+m+Ki@iVrBI)W-!t%~o;TC>7?33#yWR080$q1d
z@<o2DB2;r6Bu2q8?7EN|q}<=$f!WfalUFMbN^436dq=T$<o9PHNB8^F-$Ng$NFwFa
ziK|00=I0vfA@R>>wj^as61shxva(|eJ1&Gn1;V<!rLciu{?c?3BG^g+O<1z71fAm*
z%T^}~d@WOve!2-oN<H-9y$4+j11o8?jqdJHd@8X?atfYk&33lT*9>W9EPhDIrPNSu
z+#_kPD*Z#po@@rR3G5i+T{1IH!-{tu6=j=MBcat4hVL$0I;jk7V(cgsgDiG>RR)r+
zEH7zBec6P1&`zb3;Tmw1IpT>kG`Y2&CKCNPucQ0ybwIQ}F3MluKM=-hHQF^m!>pU<
zd=ue#e{g`MR&!s)SR!_?Lu7eRQnEdYhDe}>)R(0lOp2&GGCHAxSUAj!g4~k9+LguM
zA?Zl&oldgxo|@5$4@jcC)Qq)h<>I0A-YsmYL2Fk6^{>+>5CebGyX8c{u^q6@fRQ*v
zF(d8*>rpI$`8k--F`!(2Hs!<eMp-3H|NYSBYXmhg?u>B7o*-RE=oLO!-~7D2-?7U5
z=VDt6chl`HhxUlA_9&{kOd?hQR~H>;>&g`?8LUQnU}9okT5soFJT?E;VCX&5hCgFm
zq)Tmd>$Yr4wADZ@BQR7Y`ip&2X_^VNtP?$mV|>R|riyk-X{em+X}h45JS}ntMq$}t
z+~f04l*9ABf5ec@Q>B(%<vSduR)hacJmUC=wC5}D(Q4HeA+*rDmxx$}XaL@ZS<Gsg
zP`Cu<dZ+#SxA{~j%b<@Zkv1^hT0d`9b_2f6wItw-ks87Y9F%$toP9W9(7NLVm@Fk&
zVN@3nhb6iNslg!PXJ2x#X&|8Ni?DgQshUN7nS`gKPM><ob0(4CmrI^`lCVEE^(_G$
zi(yPdWF9Zlo!%?hTa8&1b}FMnHVJXJb}VMtsFlJu{8df!$*uYiI`-*9X3*LZipnF0
z&Q{0)uK%G;Ct~7V|E=_B03|Ox%j^>le!<l!I!>XRQamVB7Y@Oi?f$%0zVh}L1y8hu
zq6ZQp)w15ACcDYVd{r)XTVV*9kL}oysV@0~M2D&$8stjMpU{1b3Bu8)9-kNk%SXJf
zaFEzR#Jcdqe>O^S;7%GxoXN|UqI2`(I5l}^gHYq!>S-&zxIK*XYSP$e66VU_$r)KJ
z8Wp9G-)S=paZN$6Y%^&f9}dk}9a4|6*QLB5mR0#skjf&79`imT<v)7&l+f7lHen16
z32A5Wg-pUKUm9NTqo|&Q;x_kpi!ow+NDlX9OPbZnzVheWx@}HTf1@y%t_ln+1dYhQ
z%6CGa3>0TChdmxKxA!~Q+Tt#{*-jO<gQb{fFug!4`<aEzzwZh{F0#G_B_go#3r&mS
z)21LD$7MZ3^Dp72v5JIa5)Cg#2q@I`3vocn&0E0mUs9?pP{|ZtSkC6l#;IFApXmDl
zIQdYp|EG=dzvVmrS8yFGGsFMNSx(yFw4-jnsxLKg3o!cdr@BotG9i2LG>l*qW?3K-
z)PX}p8~ouvO{}&`9QJBT7B#?7YPDPT&2zqae1CjKO6Q20v`FWgoZQX(!{zJ2_3e!S
zJj%}~VT;)sgcP93+2s?b@5g^{m>h}8>BH@tVT=2S)@y?eIvR*m4D}TD_xyZy@sr#q
zXm%pRaEhPP2vKIE-(t84C$}e0Y$SwfaB=ed{p)?72*qhH2dB$G3Vwt@wfp$-By!d+
z#a)KLpe7?y4)e5eR)rT;_XUV8(vg#527SJ#lY&pY^LSN)%;$xghS&G!OHe=eXW5kk
z$Jwh)$W4<F(7e1lCE&e-dVoQlUBN;g7YEmTWp`7MGCk`e;UZ1ifcH^FeT}LjtSpRZ
zZ%2b`G<nyW5}yxk)}k!^DX5P^J<h;}J!nNvnH5y3fE9Em%<q8TRY(D!#96OAfDl7E
zpv=C?fqZp~QF)c-W(x6^M`3v%_qgv;+@l%d^hDLH*01NMZtz+9<?Hyvk{_;mS>U%f
zM@;ZJ*f|FNDaCMScGugB!<U|8zn@)%24s554a!4EUN1oi=KfgxX$A&;Y;Sb(mZe&0
z#E_T&gJu8jlE*!n;Adh#{AU8+`R_3Fg$QYjwfCX<BG17gH6i6(>JA#6xNz+lWdsr}
zSutu(LQANW7lb9Oxgb8kJgos_C>sS}lp-<>A>Z0@$|b1{E0+?njNRm;rf)aItPPlm
ziMmSBIs7Zj+sG!B=J434SwExQ8gLMai(4%vtkduPqAAMF*IWhdNJ`;LqLwa7G)`)W
zDvs>jV0p9U9If_WFf$0XI<1MhI0*a8dkn&i76!N>c+(HJnctS)HD2>D{?G$ZDC!XO
z^gYO=2}p&RhP^0vl+S(?DfMn~AcQBj*c~)d*=?x)Tlj3yNA*WA|FlP<*Z2)jqY|vj
zxB}8Y6q}<LSgfn{8(L<1;LAg%AAX?At{CnF%~yoYo09~Dt}b3M<%4Jn)We;yGaBaA
zMuoY08~)SZ;uaDEd!Sk&bC&lSclFxm_gA~D)PLqULwH|XEo!;9b~u5WYN82QUt3(7
zjHZ^+gjUl<nH4Y%RRF2Gd=m^t++x^}PFPe&q=W`@0_q?`YV#2SL^-mi2-zjYlMtDf
z9msy10iQn}^$T^Sv)4!?LJA9x<*L3sWJ{Co#HeQOBw5WYd8<ZL6Y`UbQN1^H{qfC?
z>F#)m9){?(NqXmM#-i6rHKS3rt3@pP8v709gHMvJ;Ssyljhwa5NJ}TxK5u9N=cnJJ
z!($eSsg3jTmziKT(!G`rNA4Dc&PIZ1M%p+~I~{f<geS6IZB|?X3X=)dbj*f(;tE%@
zwuU_mu~1NXcD$!UA-2R4rP(>A5>LG93E#b>qzf%X8ET0^(9e@>s-gl?JdN31T{Cxu
zy#yTu_v-(mt1TBKXc$Dp{uN!GXtoVz^XQFyjD>Z6X%k`@5W6Woy<I3e2S}ISaEAiI
zn)~yE#ar<mNhOg2jInfILogr-OtQNq&;0xdEU=b>ON%2V>FjqlBf&<EYZFosxKOU2
zPFJ;{BJRk=wNrjcyiO$uKB;rgDZbuW0+f>(Hlm_5S&xBr3*VvY1B+)66O7AMdU;m^
zQwb3Gl3Tp2Yb1^-jZFevW}`>$O7<$qR>E<`3;M&>&Me-aHSq0sj%zAn;^GI>O6X>S
z!hKPFi^QGfAD^<Hr2^@K9mi`eQG`NyTO@(Vd1p#nT(sx_tt$d9&M9t=rWL|gL24;W
zWq^RE;XsZeQFQhU_EvU`qFVxkm@laQ#w36UBAICF8TI&gS)Z{a6VndUwgO++5URow
zp>ttUOG!}cMzVIp6XrSpDKn>a!P?17#tZQ7j!u}#4lXEiR=Zziet02p&bS=Ck$%sn
zvzJIw(bC*P!2m5XpG3K44Z8@J-ZuMsc$s3r)Zo2e-D+f+=~<Qlk2Sz7B*aYo*P$8&
zE99D|oJUtJmm`FvyhbT^Ha@qH*5L(l>mk(Rz_#s}0Mp&zGSiTn&I3HaA)LuqVOIiL
zJCg;_^XhYh^q{{9iGWz94__FPLJVmob8r0Gc0|aBlwMCUIfl}u)hi}3*JO-voC%2q
zf8I3r#C%nTTgsqfd;+N&fYAdCqX%f{mM(G>Z&*zh2Gb#4DzkAjqL5n`q-rAwYR1y)
z;3KCVsWVuN=7?l|goZQ&9_w*Ts7^!XBxjXMo@gk~Ntr$ZwZ>juFlh?#g-cg4G@ta;
zvsoO#>W3C^jnZ#mUYMKDH&G?@$wJO*<_1*6|7WJ%Yk~G%Ie+E2?D6(#Cr$YSLHExj
zK7yoAvH`{P<T<{d)?9vQAPi+$WNiq6!d7Jy++5~8MPufXzL}5^AvS#DBYiI~B8=sN
z+{=h;1od$ssxt)#_eM!KF`5Mg<1CH5<Ja>dNmY%SEl%a&j3TCn=3;32xhd`)%N~#`
ziW*`X@`2-x$kXHfqVV*RrUm*$L0bB1-<M93?b)p8udMkQc)4SR*4gi-XcaTs(qTF(
zz*tvLAC&o7urxnn1o|-V`qE=siiIG5`bd`#?3()!PWuREpz-KjdFB!tQxhHL&yxpZ
zenpw}*S)ikQIv%cK~DUIU7-}X-gvWxYkpXD)aoUOa|Z#5=U|<ZxNC$G;Nliw?iJK7
zMn7Q}E3U%uZfl0)H`Bn*;E<4N<&{S+$}_8M#D(Y3ecNgM2xe3AM9?t8GIHl@WgQEl
z#{xr5-M)0cY}9qghRRmb=LHz=O;%y<u-g!#Z`n#NP+zl#bZ_QUp^0-d=t%`jgjEX@
zmTqDGiD>g2T{PPRDF_?e!({ASlcm((bm{nx+z@~ru(mt{@^X`r4F4mM2lnxGMBNF@
zKzRea+Hna%Ox!e`%#}0REDwPGlNud5@YHd8>+BguC|!`9yHtepl}3(&PV$1;EpP;t
z9>0W@(ftq64G@6e&znV2E^fa~(F-C!Hp3_T@qje6!fyESLeB3S?klz#MjWF6Dmc+G
zcXrY|ll_rNB9^Y`D4K;Av{ub-XQA#m^5k{?^8q?}RxHK6aDYJ?J4kUVbLF%ID<I`P
z0_O(q49s@fI_e}&&e3ILs|L;++(+Z8d7Cag%;^-4gFVw|JWIL5Az$fTY@ooe?lRi(
z-9yz-A%2p^`V2QGZ;J&yXG_x6HjAc{0!+4&H{y(@H!_J}&%_>@bOLflHMlhr;kTRQ
z3ja&6f0j6MS5LZa7nl0rwha^zP{FYoO=!w!W8q2!`;yMN95@&|3;O~cmm2q(lS`wg
z;swS^bqH#doLIVmes=CiIX4QD_&pEYpnU?DkmO+Qa$i<zaX`$2WGpe-q$Tkrd%|^9
zuEw+Y+A07pcc&~ImSCcC9jgw&MmqX9fIZcJXK<?uj}n;h7>*-^bj#AOq&$T)WLk>r
z2QiIqAZ;<QGn(=-@D16R%+4C1XAtxo(SQRX!HD7Xxen5MUZ~>ZV$n?)BxsX|IvhQ~
zcn2JEIxiT}`nBDyqd-DFI;2z`hFWh(dr1If^&Inzu4McbH1yk!FN+-UVE$5mv(uWd
z^lZE&e4xNEJ=It)Tcs#<#dsTyxfq5epe}kNo2o_7X%Aa-i&R52D2HU1Gq&0&x2`5l
z0^0|Ts>1(^eix<xK|c#uEM3A%-die$J!~vf2$Q(@1D|r4rIcWdv={{MP^7^EAfTx*
zslfyw1u9T6sIS9lo$Y!TSW`H#4?$;H?kY*Lq-$Uxr_<Lo#CY0S{9WBgdwzQz2`zC9
zvgFkkuq<yo5=0=|E57nqj8N$dqX<nWsq@!SdWlG=yCq{JN#d^KCa5{&_07-|>Hej1
z6%;)>f}?PWkehfsI$db}TS#V<P+*L1S6)leX8+1swI>L#1bd-K0|`<@AK$f}+<&Re
zLOD%xqsDriyeb~uWchG<X&FCh@0I6{n_z|Rzfic>U`}tGBmsp2Y@2r4AX&wlM+@3$
zlJuLx*!ka|zRblo5rw3l^pt@yq*+HWr-#$tZqW2}b|7Yuhn?!_L@SFbS`WJ(u)R^g
zhX;LWESjJ%a32FX{NlnV5?@~=yZ{%|QSbIjI^qG!y#0MF0#`;A7&2VsDP3YCl3GT;
zdg$w;>6aJnxZUcoWPbq#7?u;jeP31BFa;#RVzWAf%;X-i5rFY;S4s6PyU#e#7TqFM
zPZN?H4{=9*Gopb(SWg3K7CX_Dxq*H4E&<`}4g`Y^td+WaXF5-J9;#0wPBPGktJc$u
zdN;4Er53hvW^52($cCSLoeB)%$6}|OZyV<-BbTXeFgXKc!E|++oY7qYNY|2GfjI#*
zm%S|nkkdYIGgX|#U*Y<^3X;)4lFe~;iSk_z4+PleUP7|;S!{xg%#>T?SPpKzKkxkk
zLXfQYnX3yv9wHvc!wvUDm^{;E;sMPmvt~b@r|H3&K0krU1Tx;~@$mpkwg=OEn!vfw
zCr{rk$knM+;@_%o19~J&<oCle0!3p7Mta1@kXpM>L$z{ecuUc+Mw9+h86>VDma7s2
zgOVJIGbUij2ag{Ku}mSvc=`(10!FxkJjII`Llrz$D^>|-FWNNc7Mg0%28sh%A9F>7
z1g$LBr^`Tl9Ge6-DcY<`j@LLvUYQqhv>t{}N!fEOKm$^ROiHB*-z{bVyYK%jhvlh<
z4FlK&RHiq@!>Z0S{#2qZCX8-kx}R2bE?vk*OCQ)49+ulU2dGt!jHO@TPL+X<G{s-d
z7q2PlmT=_(3(FNT6`y{`PX#D#^%zX#C&(|9GgxGz=+YXOHfsbBL(Dz)ISQBtt1Dlt
z>8~9O_q0NQw<JIwzE#=PEYl#3zy(=m0w&5+UEJuIEZJHMlob_Z>=;;Eug5Y0Wp?eI
z#Lw958Nr`p481fOWn(CAF#f4WGX^fJPfx5GThxk&g@QAKlqk3Gjt_%WZr-(urZu{n
za+#Xx;9~*Ugy>xrQ%`ozr;OUd#qOsXM16HWBN~0VO7FBSFR;L%X?2k1*EsI`-CTYH
zv@0Ej*mT}v$oHUlg`q!=xU@;j6WzOG;_=j*#E<J-WG~G3NZ>ijc}E;QK78LjyjgT_
z+oM>A3+iMZdu}Ue;S@2CD{m7a&O19o(Y;QIsXqR3w<}QUkL_`NVZfbgs_a5sKTI|T
zbCremya|kNpmJ0fs7Du!vIU{BZk-pUa18}T!{nVW(z8g@D#;u%jX-a2|9hq%Mi}Cq
zz*g;gk?=bUh%O~7wEpA<oacfi)$-^cV<6|h4`r~0cULv(Z}=iM)v{DLyaou)(g%yh
z64*LOxEAY5e$Rvtct(&rtB8Aulhn9Y9Mz%-hI1HkZROl%vQ9PZExmTJ`Dn(h!{;4$
zha8Sr9HCBy^5FcUdSDvWI0m2J#H}QB&Dh^$0Wg~bNlGf-CTF(0o9C_%hR~8qlDNaL
zZwM<g)l5vE_+7U9v*kOSa)T9PR%19Ya7pGP4sm+m&@_M@6E%9&!1V^~HwD0g46q~t
z^33g(cXac<N%_v00R4;E5_5OnXq&vbL=qvn$Z*~^o@b22iJ{$u9AzO|PqEwM^Ns5J
z++6j91Q#_Q3YQJ3^>-=go^W+=db1Tij86(YB{JSw&+m*bNtF&jPOlnci%L7BgB3%Z
zkHOM*B8&E@c?piPl-hZZOPXPJ+G><=x35Pkah$o`Qc-8op(0u3c!7h6nt%?#c?XgX
zr@RNwB*w_VzGmW869|7vAr%4u-)#0Q-JRcy4kxz=0G7HrSU)IL|MtedF>`_n%9-dx
z!c;a??vC}m_K!w!G0twc(z^}`)R8C03jD_;Q8Pqc0%w4y?JGXCTZ-`zzP++7jcjy)
z<FMg4hp@l0D^V;Xr~fh|sZu@n2trPZ)}hj3o6|UC;uYmedwn@jY30%Ac)%!!^qRO4
zUt%cv7rhQ?FJL`jo_v}5;9lPAivhHpgz6uUEmM?fd-=fqGF1h9KDf^?bWZHehboLe
zSUY<Pd;+dcR}ps%Xur#@zpwyJL+pP4)8Xg8)nxpaRN!BW&Hr-vxl-4zMHxl>v#ZY-
z$1Jh<^i3q1Y5-5zvhT1yEEh~8&4)lVNkDo^`14+Iag%YLTfy7uf-oW%%+a~2tgOG?
zaX~%r_(slUip!j{9H_ay-4$1M>)wSOVxZ^Ndj;2t-Wev&q4-Z0(81_85b*r=kDdhG
z#l5d_?@Vx{ly&b~fBqbF`0`|zI_XltWhQI8@c>nNQ`l=1AKm8f54DLvme~|j&NeA!
zDe)6DdQJ3am0=y!Dy3e#wbr0Tt|l@7PO7QPWmX*!nrnW*SY7=-yfj2f4f(Np+kcy0
zNk#eNyFg(5PqihOwrR|{NC~4}t{3Qf=N%EqiTQ;#hw};QA|JSs6tV)6c`-#%>bzG1
zOL^z#`C<~ES%KpL8@lGY+*!kT{?ojcSewT<H9ca1?%1<AYT(bRWFLL^cJ}jwc4tS7
z$E*XgxxM4F7L!Xk4@uUh@+RiOpr-aqg~o_dZmI^Ekmpp#)bZ<r(2{oY4uE;>hie4+
zgGKE4>!GrDet$a-ZE5-h#LrlmYq>5793f0DP!tLHopdJ@mBnt~BV-*Xu34@@PFe*)
zGgdt)R`pSv2YY_~2&NGts;Jqw8=e>3Q7_aByS3f*O+`u{YUeiw$#YffjzDkT>F2&l
zq&%^=oQ@1_pm2+W%pLVGBTTtV%M5ir&)sMEw-OnzTP|dvbCkPu&)hT;0<d9C5)Zn>
zhBa0&VusbtJf8Gaqae|n>}lyLO0CDXc@vJFb7$r;H2yC09*J-JlJ?@IL)tFGUeuLF
zr9AQGcC(%c6uf{<rR`HNwLJF4byK!@ZmOja>xu)kvQV+LQ6_RNVnYGg8MU%Z@f%Hb
zL~kpY3bhfnvh=Y7H%V!velZlPW+$yY;Dyyj5mlz0O@Y*b4=q0wEGP7_rE@t4#0B!M
z2t$p@V88k!MQCZt)J)R!UT!H7ijFN8RZsHHwS;C(YiM8EI^$7`PQi#jB6ZdfiVBj0
z$}A&6)5jbo{Swh${0HlI=jud19t$OeDjwtW$+OXTah^!MyZ6kLO(@W}(+`Dg*y%_=
zRZu^ZS6|Iv%tA`QZ-j%r2dD8TuXVRTP(PWMn87|`LRWPaX*V!8<Ci0^7m{qg@(Y(e
zn1Tv(b)3rNKE%tU=-ovrmTFJeSp7;b^@wk$(b9^(hKGSrQJ*m44Tg+mORiYrEyGt{
z9}rv=M9B(-5QgT_F~QZ?bVpK&Fi;5bh<Jjyf}>e>X7lj!XW0-VByd|{qy#}4INxws
zn?8{qoS?pve@IlRk_2vu<We*|GsWbC(xX_td6bc+d9Z5=W5}7fp{q>+=WCeWumR|$
zxGRM2<wOI*G%;!xA4cE|MdAEva|P2tuC&yvp30gVG^m-GF=Th@x`~L^j($gSptC7T
z_dqvOTJLaI2tjgo+h=wEA9+qNaPM0!NPJNEaWj~OJf#H^=0+>R`q0?<-Li%i{3x>l
zIU1S03mCQe@(HL{_x<)ztM0rktbDj}T$m<DXHRi*2MddT=!gLf{r$8<++^6JRrN5-
zsN3FW46bwRQHh~klHndv_S+!ctn#~I<(Qo@(-&CvEfvvd9olhFS3G5o%xO9`PD737
zUC?Ya-q6=Ekd2%7%h3l!_E`mZiRpBjewGJ=z_9C=^$6=8Bb*lMf=-`b91IsmH0m8(
zSz8Zd<0mV@6Mfqw#JO!OAHwv$2?SQ-Sy@x@IHJYWKBNNgRW}NNqVajP>}X7JZrpNa
zD&i-&WwUmuVx9xE_gEoSw*1YX1zll`bfF`I`wS2;IkUg!!6o3@@uSJb1A}vwC)}Pm
zT=oeF<}iafmTz{BK8<BM|6N9TrH`MBh&Y!B>Fo%?*ML+4#zjp3kH<KNH_FZ8vmijH
z0fFWwdz`UGB}aOqCr!@kfHK?uSkm=)b#7H&8$>c<_riP+68!s8+uFIrw%GXEnRnBV
z9p?_Ty8%X$@s+Scb;PzJ0}|wZ3zZ1a1c1%i7L7BWj__&8r%O6aglN^+zn`sRb5=s9
z*gRF9i9yAHx*-q%S&5~R_*V*uWv7p9E?g}TYC&0Wh}}TjR)}@ZiAq7(%c><`jBwoo
zm=(2{l#mwi+<~k`(5vl+w46BTvL)aD1WT~S#8r$J@&ZyJNTnKfsZb&UYwQgSh?T(8
zUI>)Sh+1Wsa>+%j$P3Y48=8tm#GsUvYCQ>MKB+5Wx(0GN@CPd8N;2|Ha%Nb12gPt!
zCPs>lRFs7@J+uQ=^{_>&Fi}?$QFlCStwUP@*u0^GGtx#n(n4C$P}mx1S!OA}YQzMY
zVm`eumrY{U16HzywAoe~%DtORVK|^>CEr9_X|tuc&CJ%dxXrKtt0MAB%4+kUKe@hu
zwE*mdT4lN-`NCE`Q^8fokUy40zK)A7D1n1eKT;h;P2SuUvZtGqbINv(a)#N3ezm;)
zJFl{wZAnE5y0TL7G_$Z)4*JB!9Zg2o7)h7oIh<{2i3CkW*gWM-rX9bfzcjS1Pm8NY
z#C{^^FC?3M2k6Q?BbkLV(SU4u2IOq{@eHE<MO%RaNR7l(@3jBWFM6wJxj~r)bfECD
zZxtjvy$<N#GDpaf^m7knx`%t9rMdhixOfOpYzvbk&}uSe>hRC3*BrLBwmX!%)R)vY
zNzWKtY1<8BXdUrRZ!ciW0a<DZz$y!kLgrK4Vpuj>LeRg(gEDo?T_G&{C#=PNs4R5-
z>dex1gR(5`eI?i_1X!v&kQ)w*N_9q90eEmCtrMN<n+_6_s|Sr`hKKjx-?Z_qn-G04
z=nj7N_Iy|QnogKpfP+K;ra+DsF9Vb=hpv8Kj|2uP|A^kOLw1W45YEw}tq)7J$PdMO
zGcD?6&l6cF-m?&Cj6vsT2GUWXnsmAn3ac(Jicm!jGyifDk<sk^BweI8^QOz=BEw+J
zW&BV?Gp{^9QtreB#JiGZ?7cPBKE&|WCrTa&EO^inq2opm`q<aIDyryV9!&Mk#anpI
zDt`yCl%*b?DXo1PTwi^Fa~GGCI044fBqL%Irzgm^QiHlDb>V2=-$MqgWj}2%sBVmt
z(G5ji4BiuyYNILVXmsewG9%B-A|<|*_X-mwsMbG~w?3;wWeA%Ob4p=w-65Q$ds8WV
zz%;AMA2R1urG4v^@mQ;HFh_^h3g-mT<8>Es{y7SzO0$;D_a#4Gagpk-x?HY;rFj3O
zs-a^p7p}EE*n1H<m%g?d5vrTRlhRqU`K?3VJ^ab9Uv<4ZNWyi?@2;bORr!ZB*pP#K
z&T1oiL{AkaeAH{EV8@R_iE1r~+<;yMJ*p&p$S34#Z<`n#QX$6JD=-!6REu-EB<!jJ
zlQv27<!9A0TwKJi0fo}_KiIdoYj^&afclR-&S|P?qDX}@Rtf*$KT=q@*_oQQbmFNl
zopMnT3j=jqNl*Yg=B%MSfwNR3zsS9jgmlc9Vm9iFaQUkT2CURaZJLxRZ^&rxy3gi)
zTj<=Tx_Mi*_7Jos=G3=1IVb2lPxXCW`3+nV@-V<XuIi^+Gd|}8ZPSHw(0F)<RZ+#?
zou=y|qk%)w;}!0QSU>g>w;E=~3O0K!xQQctDqY$m?yww|FFy;~hu%^}^3J8c@XS-j
zQUgkw8zsmTn4r0K0Om4iX0-WC%qhCCnIxqR$Rd?lBAqRUB-hULAnmOzwN_)`>B~jN
zS74KcohFne^y-9-ilU`Bg!(D$R9We=V<Av{7WghOZnA3RjX*iMJfEs6>=I-X*)-%C
zqzYRtjlv$tfA$q%4qbr{+y72$<RTEBrb_&mu-is!D>Q(?XSViko=!u8`GbeNMB&V>
z6FXJNF62c)1M0fKua`OTAjQ}=S(QFEi2tPiB*$Is%c~f-_yI*_P)qfg+`6L+(o0ze
zp(_6Kt6)b<b!Z4Xxl6$U5It|_ta4uOz>t|xzo~Z1TD=vr7MxaxaSNIM0wb|hp6?j>
zXR>u>KvxB7I^8QgY@l7_PMAkWH5vv;xh1BTPMbirF0p6msfJ9ugUWJoK)suhiJsN-
zg20AAd5_&fln~4%v*i5E`mpQg^YccWQ{Gu@4eJ+<8#dLQ=Zv;i0L9?N*ehJWEG=rb
zlfOP3L^2Pb);aSQ_{TFV8}LBpI>E1nOcv|0{IAy&XU8K=_1`l(h+m`mtaMJy%^@KJ
z`_pGTQZ>bbJ8|FYcHf@o28Bdn%;5^J8f_^2axQShz!a6A9nTm>GTFrPxtv{DkdY4*
zVL1LUT&<&HrDSHOpmh(mNtjsaY^6A*#l)kk*-ragqYG4iO&8J&+o8g#jyjX%czX>_
zRM6!NCYHw!=YuFHjxF&xL8V-;`-MV?<aIae2g=RKB8HX80p$iCt$LGAYE7GvVW`Dv
zp=Ry;?2)nv5xY_Sba{pwlc?qK;r$jIg7&HxM}H)@ZW64+#Ox7x_r>ZhkMh7|=|gIX
zOx2YL5n&--Y4=aHR3Xri(ndR!i?EiN2N#a?&_9B9mhm6ex5a`c^dG$@f~G)X)GF*r
zhh)D{i{C87vie0j%C?VSo0?$FN9r$%mcykh`AV`>)e43<5Fh0*vumvsorR>jhK@vM
zdZ~Sz(XE!2gDUst7p6UF;{f&`>N3fqu`WKp9yZB*D*vcElQ&(4)Ygzo6U#KTv&X}s
zT7Spd%xATGYvjV$R|U;+W$P%YOcm5gITaQ-fMgX*jCRn80F8wc21eXoIl*)qQduz>
zw+;YQVFOlsUK&nYxOD(ERyQp8QA@MTFd1NgpTtrl5zPf%7Rh-L<5ZUbNfvk!V+!rK
z46$*g^@vh4fr>M43#V!BaVFx-{X76*0PQk@n*U+x{J$-a|9^)x<Nu!2{?8#j@}HVK
zg7|;3_m<C@lOmohj`|wu;^t}r2p|tbaE5AtdW5%E=gJOAwk+Ok(p3qN{@iuL`l^nL
zr3&So_>HiWpZ%qt?oQ^@&pdgxU;|m=Y-}HAKljA1rG+B?oxGpza<PLvt7ujuh!`j>
zi)|jCy*&Ot9m@I7leERGMSXewokMWq?DMcv>Abgot^$`LFWSA&!3trN7IXgE-R)t5
z=$0Os0oA~GAv{<i$YaD{bgxLEPK;swu_VMgK^V1HXP7^@LH9zq(fv<C-g3d1#&w~W
z_dVYi!|lqx-tIr2->VYg%_GVEPbmg0x~CcpZ49762WyOkkT~>ojD$Pb)2icv5SIij
z1Iwd<b8>A|OgD7WCdDFsLSWNqQffqyb^I9P1T-as2r_8r9=ki;g0}I0UtB9=SH`>m
zR|}A0QEn_aq=qbX0#;tHkAJo}3pUv)F-S36E2KO_m$*odLmo$kl)BHbkHH5VU?e%Q
zg}ok6nc?cLzjeR9fWuA{V9G8F&ZR7{{JAkQ5xZ$4*-I`rnGNP!cWJEE0h2XHNr2z^
zP?B&&^3#j!sCjs~i<T8f1lwLTCsL9zVNVSiG5s9h&$7beaQq#V`mYWLd*wL#FZ%!0
zMK;NKIollGrVE-bDjq*Qao~RS__~UPY}n7PG;K%(VS(*$y5qnv5DXafZyI6nNT>(r
zf`M`#YtY$a8PS`5Fyaja!S{GNdjgj6vy=0BFe*UJ4a=5!A7sgKRzB47=d#3uIE<Fz
z%kle!ruA@9dO6bhi%HrtJ$ypt-@^%RYg-L?d!6TbW4g;ScHBmE#et%v!y(KWKzDe1
zx1$6xL>X<5a8bxq87l%z4z1+UDx-8u_FeUGxEs{?SG)9`JO<0w?AL@_ZTEBaJy@vZ
zW^7tx{Wb0MkqbWEz{nD`L0XGR2>AMFu)5@1G0dlQr)Us-2+uKa!4`^QsVPDEP%RIt
z*I2>pG`a`Pu4R-oA)x2^u<a+l-Mk%ne?1<9y)49DQD1cJ(DR2n^2vEebLv1$3DH_&
zAW@DoOAn)g5Swl-cLj3N{Rq9x%1w~W^Nw}6*_;2|It+hEcq~*eY`ezbA_Xx2dWHUM
zl}-C`Xj^<Em{Y;Trx<US@MAzbipdSw*r&#@JF*U$Hruz35dv~YpjMH<f_>k^5Rb*P
z&%ssI;Y38(P@@GSPU97mb?F(27#QM$KxXNEmG>WCc!o=siOq{nJa|DQF({>`h>)*j
zh=_CB3mz)pj!L>S$sVe_9gP_JK!gJljYWRpQuv_FN9l1VFn#C}lj?=1JpSjwQs}1*
z+<{K{15I_S{XD%c@X>6CLpa$GCw-LAu(%=q@C#|mZlIX?@JTHnMU0xS^j@+!s)F~K
zc$W<7Go^^o>x`0wtFB?EX|bbyRyQ6VppZRirfYdRv6x+F!)9WZo_%a-L*|^+gQX5~
zr)Iz~2~X712d7lr_rA&I^8lMg$l|8xhRNL8zGIk^uyn^u%NS>!GPy=YXN?+iU1Nj#
zp4T{VvGikklVbgqxsovYSmhX0J{N^Jc+K}{)4Xgh-B9&}8GA>4%kk1;FVG`b2fi_d
z>@i7UB%gAfFn9{30L^g=eCZlYD3PcUhR`B8lD=6>A$^X(6$iJl)(!RrOSU5Se2BD%
z((CN`{`I%06|L?#k3UaE0Mz0P*%!e)-__le)`Mgwb;iBV#_5~8&jxcyS;0&=fZ!V<
zd3&!uxS_4*N@ShZRYN$#$svZZpu27+?slnFLy~y-ypNJT*ARD^B#?*k8Dd!^AE4x4
z$#AG`r$x2bymj}rQ<hCTNS2AWEIwH-o03K;{X`P}<2w={K<)Ko=hN{cW2z21d~j45
zhkC#p+>A9{XXIo*gzKU)tO^`W%p@09!hOSrbIWGhR+T^;>jsMmC)*RK!<P0<`+WIg
zD1>B;DxUlST5%?q{l5YO88UV0ENH$hD9(P=u;U~1jO^BwgOWn$NV_CWH)FgLVd8e%
z4VRT_5lM5f4NtNJzVDn@Hy<Q^C#fhGEKFzAPMvN>NUNW~r4DQm!gU9-a3iuVDQ3VA
z&7^+al3xk=0D_Z<`)uegK-G$KzPQ_@XcH*78`KCT(u5G6V-{$(+HLKL=)}ZIRA5h-
zYM#<(DNUNt9a&oS1heUv4Ksx}4zozJ#mjHEqd>v6Z9XuWCk|Bozv4F{jxfm+^GT#i
z)}D|UK8lIhO@Y)%zb9P{N71IVbM=O_k0uXYIQ?7T_1A2hX+m?xL3X-Ir8^r9lDxVY
z6Qb&=g;YC`_8nfu*q}>Iy_76+5U8r6Oe7S*Hd?-_YB4wHXZsO%9J_Qez2$joc=#oi
zR|2%5h9^vKcR=LQoW)6G6KnFRX3=3jeX2H8<f=GaQdbL+P6bdYBb!3)4oX^4<r<yG
zWWMD%Lk~3vw_da~aIpwVAE5`*JP+*1;7%m>#igmt+UKW>XbvH}Vs{!N126H>-3_+D
z4DXwVY%dzyR#^(<nUpA3p*lI}MbGhVe1$aD@!!N$s7_dlSwZ7cfv%=Z+XudP?c<W}
zuIG?&+{G-zd~1<kk!hvBv%7t4e}-HVL?h2z$?}8}=a0c*in4toniV}W^>Y~he1)cZ
zaSY#X9m?ET?2C=Wg)KfouQwq2Mc9wja?s()|Kj}zm^mK9yCCvZM64iK0Qf7yF?913
zM6@Kievu<3Kv_1(QRn)kZj~b`;=z7;!Gi^`_Q7TBvCz%xh8$-E|8>PEUlXQzZGL?m
zo|h#p=LQ!)=AP9N|6OLu`!K{93)EjZe1tEHs|FA0w};+n%yjjC^d+2ZIn54P2rhKP
zt1KXbESTka$`rU-MJWh@YXrv$TFlACmG@%!pnf*EnN7S{znz_j$@tEw<X65Y58*$M
zN31jRYZ)su_j9|3UmOVg{xOjkHhVd(e0E0lBN>2yV>V&>d|dYVcm@ktM}GNa*5D1>
z(%0|C|MilcUDz@H2vxnJ&`(i^d9B5?wD4&wKuyE9LO;GeK86MpD*#rcum`s?BQJZL
z3#Nh5*PS_YXOUTwC~`APNzNUAl7X&K&4bgRl6LtfY2<nnu1)>ZbJRFMBVf*cKOc`r
zn`AiOJYrz#xU%d!3sjqBYWsObM{4zw{HODm2JA%1U^lPd?62>iQppa9A(8}W>~1+U
z)&7_Jp~*&O4dG_`pZ*NT>u*dM%T4z$EtgtbJM2Q*mxh<;PQ|2?PE*}1vhbHwg^U6e
z@aIY0*k#J!%vyBUPCHYL=EvUGfZkEhGwDojOk0cy%M%7Zrso;mY+GdK&xwkZei#{?
zjgsp|49=WVI@L{Pa#(H^kG0m-m`6Bp3%!hu+oVN4iX_e&*gy`C)PI71SM#Z{;ha%R
z^(~idH%=i{z!__Iaw;8_WMJlY#0@B}U?Wk3$Q0NYv9IG`&<hY%t{ro)!t#mphy|D5
z_XI-3!LoUqoTT{0TBC;XqBI`crow5~O(9hn7!!enyOvR<iw&1+&{Jk0i*Xxd<0gCk
zILw-WRWRwD*!)#6@kKZ6?myVwYyuiMLbb3b2riS*xBWLhhp2AfdRKq#{-AdLLGI!j
zv>Q5t(91DoFK`8^{X^wutH24EJm>nuI9KBG(%M&bu_wzDjD1WST(wJALN=q;B(_rU
zuMhS>)~NpOn}a~GpmP0FnW7F4^wy!iFO&(TmkaCo{1l)d<qsIg76|IXMbukWAUe5b
zEWcc=H5D@IQ0OSpQFFkX|6FFWUh7<LB39(W@3dNhZ7pQ=C$w#WesQnjc@+t&vkup;
z;`#cw^1p-wF)G$px001F@0ztQ1My~Cc%%+Z+t%_HN|xVcE9x!zH$f}D2oZ7}&a!YK
zMB>z$T)OYexU#&5=^!MLi0>NCdAmqdP)yWBy4a|Dlmd4#MC?3Y4qp=&NM;K!=WUt0
zs=*n@WH$kG3*(vtnwU~Y-0J<S-l;Tx`%MOfVRt{MxEF)KE@Js5EfR{k0t$oz>G^T(
zgj@bsUL_@pb%?}5e@OVkA^x9xkFHMj;~V~O-;}P)UG=yQ+3<&03KYEgwiJUZvL(%n
zDXnuc6gs@F#gHiBUH&Gv0u18_LTW8-r4EWNS(<KoIa|y9<iBAXbU(9(79~ZsahHbQ
z1NEi~mP;AU5yuw~U%J+XR^dcjJ=6r!SJ&YbFp!NQa^%?gIsp$*$=LZ_K*zsuLw$y?
z;drJ*f*J!KxQO)+qR-{^BGGu^Buc%Ka=LRv^XXPx4e}3|jod&;F)%B*oXr+yf{Rh`
zB?dVC!95ii_!yPU&0xSSx5Vy4I#xW%^m5fvM~ukZoK0bfF#{9a5KF@NuQr4eBjWNR
zTrW<`W<&w$5-XqyL^vhJcjeokd-Z@+h2#VhbTF6j5@0J<c_a<&Bv~2N0Sze=e4)!@
zLxtNe$vGZbA=WB0+mPyKE7E;-Hov9)l)L&Xt}BjzsvMRS4|`TZF(vikHKtnVU9~z1
z{1s69Qg_%iAkfP78IU?RDHq+;2ZoJDcxSF%N=C|)dS#Az31bYGKc3PtrO3tsv2#6a
zc8XlG{)Xw3e|y5M!;<s<=Jw#`mT5CL2<(EyntsL<yh(zWH5`6Gs3ENpCt4TOyIUld
zce<m|$JBCB{;>RsB_lIyCdrM}s6p9B7?#rS&7(Ku;N9*QDhXTMGOSVIQE;)}R&IyI
zcuwF%5%bvW)W6R6bO8KNm>xC)ZIfca+J8D+&nx41QO8ll+e2DJ?u?3XaGKbW4sVN-
zV9)KIRM)tAQ~#GpUi$ih`adn1|5ew{!$bf7m`x^DPLBV9*`${vV5S$eaWQqWGjuWi
z*H`9dX>6(_F7*G^gjwulr@E`CtfGa@cDs8OOfxKCdL_{@_&?DR;DRV(n1NwT01U#&
z+Ju)2h#(>YipJ;r0~QrXREHZ8Qj{COOCTs1F+`S^n~1GQ`FMK%1Nhg`?%fUZTj$qx
z@4RL@01|n8I(pDlAc73?J#a6MMfDKzx%zJaFb{vgQUC_c^NJq9n|=WjdUkZLjxoru
zs2vzUiLV~hvvc{fpkMigYLy-UfHD1{6B{`$>7jQbxe1iw$ZKYz(h-tKOtFXzdMSk=
zC!<*Hqmn#dv~|U)D-%5Jp@VGY^>G`<*KiN-(0F2_A@LzlOdYw>aQi3?X36v^)O&45
z8>X-fIDkl!7HE!Y55%nS^dWdS7sPuf0Egl>dX5ulG=~O|1L5}KVzb9~$9td-I_Wq&
zE8FROZzrZC4xoSn{-l(#qsDVO%JB*rJvM+S^B)>aN89s4BJE5qZ7r-!%#1&Z<-Z+o
z?4&o>MBPwtTg>4ruVL4<UrHAM22+t%jhFD+Q-1)sT7U@Lf8n!E2mwe$eXV=%hdnJ0
zJR{H{lx(A8n3<Vl+Hg`6+VXoZ{kXnheeZdR@7;RS!fqxaOrerMTpYJGC?zR{_;`6!
z#t-ITe|d&}Iqqs7HL%7aj_){m6h+D{Cfd6G4_ogQ)l?gGjlMQes)`^T6anca^eQ4E
z(nO>;F;ocz2)!x@C<G9Y-bLxX_fSJMG)d^82c(3W1VX~$|IRnYe=g45E^CZ6_SK%x
zoNLV~XVB&ks{EAMQvmV5EctdRzN>GZ<&yC9H1|L0;oGkk^RBOBR6hN@d+omen}t&}
zaWkC$)@tU%LWLSReC{n0vC{n;ApsFfWXIfR)^WUZ#uDSQ>T+lN(|=E{F%I5f%)93G
z`H}by<1Qw->sNbCgwOBq(jl)ieWe`wL@%i(IzvPC?B2{RT-fV3H~y*dI9=m^Mkz-t
z`e|fYq501KC(8FXq2ZYK6z$iJ@7}b1B>Cd=`Xi%P)RLb@xhd@EThvtEa6h2aQ1`e?
zfB$*QI8*U$!3e>8^WuBwObWNGK2<)yF|O?NAR{a!VyXAGPFP8`WH~KcFU`yyTx9r)
zv^#qi1*YrlK(G0FWq5q|-oY(`LJ%eA=iJ`9+t0q<rZrHfxks@YMtF4Zm2i)y40psU
z`L|K^+*Yr|JgHgK3KM*v(nN>-ETA!He5(KMc67vRb=PN%1%d{e27ASve?|U2{YY_o
zNB5;rKJB=Slh}!%7rO$3)hAI+*}VDj)N$YOwJlj@n#jnBZc|$&iIudQqY63_oBtIu
zLO21RSb9f4)R_90UqjOEMA?71HFJG8WLIKWewW*aoyerwSF$?lzTbSCojx^6Xh3=e
zu}a~=(Cpv-z?vEyj_<8IoF&{3QtqS<y`dVH%m0eO>$cCA_s_4}0`kMgpEtkod*!F`
z<o@(GWZ!>}Q=7k;swwHUKWFFd<Qe*Yq9yw4RpR&hB(E=CIbQK6(K>uCNgPA>?5_Fq
zw<H85T%=tXhds7^vclV)GV|1ccS2O+>EZMHVkNxWPg;y6HES)8ey!6EISaJ^X#5fL
z!0==EyX3zDCAKAI&e8QH^|@ZPUNv4xCq~;^EalKfXeNyXpUr0Vs7AU3)$@tG<~OE4
zM1BMe^A5`~s!!(!7%&uT`~?@2{<4^{%-YxH*P7KD)jHZ~I^EXI+|<zinLMsH9_fTl
zeJbW*-eXn^)EY_b=7o4hd&YUPw>)n#Zc+5aZfqa99eq1$+fZER63BaS!g&3GBqN=m
z<=ZslUxIUjwGXHn^`9=8ge9LOUr$B~a2WqH%rG)Gz`fBkTB-^%@HdYrTrEz_dt2yf
zZ2vm>=f|pHBN0R8qI0OIw(n2=385|J6BcP+X?^K@^9pm=TzhL=z}JABfU<L*s|`bS
z9^(R?0t?_vL!&7ZfJvR%aVL{?Og>{(gMOKbi=Kt1qE29@PZaJ~TvlAFUYuSXLfxvi
zGTbf0EqmWp8Oo_HW`O;)q#JCCey(Z_dwm&s4fNi*OIq%|c=dyhzX1YZ=fz1|^~C%n
z+eq8GmEwDU1_z#w758pM)D(JrIdogIUeo7e;?v?g<)hcJ*D*=kO!rAAe=G#UCCen+
zT=ispWzkMc&ScN@Zb?LK_{hHb8{r_4Ml&yqp!)jSb&Ez*Ju_!>4GSX+T0k*P=u3&U
zXz97R*?@vm=N(^}6q)Op3^K48);Yd8nOQwilo`Uz8WuFFw;1Pa;v)M&zbU>^)lPLa
zZ?ns*7~;2DyfWwma?f&~guHfF*gWZ(?MuflY${<stko`Uv<t2NTQT37!}6^$tr~CR
zW~>&K5goI^@ZKI^_JF^BeNhv}ZOm58UM$6=05wWg#<*j0;+NDO-Y(RUOV}bF1h)p+
zq8U2_gSaaHnh#mbu25dIU*HJJN2o*n<4cwQ7?!!-Fdj&aONq-?%YME8fbs8x6TTVw
z<|hQTuWnz(e<{9`l#;BM@Dd%BE|&t?B_EcamQ_XxeS!2U@>Ji;zejtou58g5Yo*NT
ze9!EzeEmyDU1Ua?3nP-RLYaY=r5~!m5*tSs;}%WsIsqaj9D(g0N`VfhqUFKm7?7q9
zOJFo`Kwv|sZ>~QDt_Pp(-}{ys?fX?MK6kU#U8qHjL5bnx{muKN`|(dipG5FB@U0~l
zB<Ua8`F(58d64|0{Kw~a;eW&aCP-!0cQ^xrz#-}iKRWq344*NQbWZPhM_5D@u;5sX
zSik^vfWCv4<6-T2?P;B_o&I_=Ca8n1A+DiP(L}@-vcDBjblSj{M=QbBD*F*Mik9mf
zx|-?u^X1RC%+Nu=kkFsN4qlM9Nv9{d@S>)I(;}1l2^Ha1?>wk!8l>rpal@i*JAs#R
z`VqT5E*g9q8yZ~EX8ov6NmA)*Swwb?B2imdn{K~ncXf|-Zm*i?RO02Vw>`s&R^GEe
zsqLvn1s33}MQn_%>*A~Ro58<&ihe?1n`A4Z>N~i}Qi*5f#|q=pB?D#OPr>gG^47Xj
zST{0$X5gcmqxO*je;ZNGsAMiUJ3{WFUZuVh?*d1~(o)fC&~n8e#6j6<mFA|Lre|h;
z{e3q{BTJoG6sN)2b{4xMn=KM4(oj*4{JFN=d_brJ7r;0aR)T*LpRC!9_?n}QnhfTs
z=JRp8xb!$eTms?%@!3#F&)av_ry&@8LQ0tWSX71>%n^{+mdgzFS+PX4%pR9uip2V?
zn0Mm-g}8f6_s=U|QzoUhi&?eohMaw<GQ_qB`IzY0G_(Z#V_h>J@E+OO3uX#-RW-dB
zM}lY3A-(@zVsv*ht!|7^BIp!oteZCic8*-D=26)4c7XT;NiSbHPrr3h;{JNauRt-Z
z<3es|_4cE4+ZCP?&5ihEP86va58U~>F_><En&{+L)8~ZNz;iBtkf)*!FN)TSHW*47
zVv`(_ii#GB+*B+`pbP(h$7kDNxxYgzL-L8MZ8q$o+nHw40CM7`=L%}o<ftmH-5S>#
zhz!LYX0FQ~Ln6Q%XwKjPKNL}Am(&-uNx2&p9Us8ers5wO(EPo<`XKX4=)iwDCQ|+X
zfl$f+>ji7*W$$XtEq9fPa}`^wXX|P&_RiVW9-?RO`xfkK>-NS__uc=zGW7Da_X0YJ
z>4806Z9)I@$i)6?mB)))O8jat4`k~I;RZ<kZ>+8tw}_;K%>NWUe-8Gu5RsOV;}!vk
z%W_MKi;Hthh>OcwiK+dc0A4R{IeCfyDST<`>J0LK`aj*duiA6}Pk#Y1bzApW|8FB1
zX&Euo|Gk!y2K?W&-T#y2>*?(71@;uv^0Eav1J&FdLH69@|2KtK67YY&_<v!ygq)1*
z|KCL6|H5(!ZV5RF89BNCFWlY@)E*T<B_qumu_bdxZJd}h)%{-lxwXywA;9MYzq7CV
ztE|55=Bf2rttnm3?7sV21B+DoQ}+iy{C8jE=E;LQC6rRnx&MCX`|r`U51;zJ-+6oY
z#<S}$KQW6xOEVmrJA<A7oA*Z0DnAPgZ1Db9H4swXft=eptcVa{iU~MGtgiG^=bkMb
zi-l~$NZX;l&ByU{dogH2Hy->@U-`m@iF#g?iJr6u?jY@9L;m4Iv8q@1mu0=joAc<i
zm8MQ|z-dVYX^u;jX@#rv^iLJ(T$QLFiiwGdBA+QnVZ>nG&4=HEw}qncm!uVJAUGIL
zge_k5s}jQdR}(yKZOB;k*^+E0ZX9xXS`pFV?PNpdLX+meFwzKE>7t_-Z=>8EO1vsq
z1S9u|oeh3lxt!#Xt;MF$olLL|al(<j(GzkS%9(Q+9wD++18Z#dX%2CefX)!HiZRWE
z!4+zY$S7BWZ!_L~Ry5=sD`XQwDu_WbHK9rLF<c$Qg8q*FaZa-t{hUtX<t0g#1U~eA
zNH4OaQm?s0vcZz)d(k5rEyZ+7)0}dkju}y0%yIw5Dtr~`&QH8JfZqWwDqLJXq%3Un
zAY6{OUHTtJ^lQh^3zLWPVJN05;gFES)z#@6@#M_@R3<Rz`pE=W6IxN}EW4KmR!3M`
z#jRX!*!J1dsqZkws0JOS+YoleVC0$|-~FJo+0Xfuon(nzehU4p9CGmC80iGAsOpMU
zu0PF>P`4nNs$cwSh{6r$Pm{}Wfxlr7Lxe-I!fu@A5T|VP&P50oO|uuF9yo;kjg11A
zst0b3a~={=bQN;-zc1<VV;$(<u;cHt?I!1P+nJgd*?&<7`!P|Chc)1{IbZVPBxdo9
z-2&W;N71|P04?QQU)umzcAj=ral!$4^WvK$QMl5ve1+ZKv;5%Aag{(PU%I^^b>exx
zGNso}z7@eT(qpGL5Fb?j_kaZXsT~kP7b@0|Um3^d9>^<0oT@nIT%vHtQMeFT$o{yB
zmlG_&N$mVo8Ae_s<EvBX+2=;c`0+8rC|r(u8y2q;;1s$$t`gz|yQ=hbg84b+s@99K
z&*dJGt&g#)J7ZD4s@v$!eJnj*Wf!mN=~P7^U{8r$M<F?QZ%fsB*&r2tBC$7s3lCG>
zIu4#4ILoWTI>RpOo3>n=eS6Vto9>%yMJ=Q->?uFp9z-Q-j5w#dkGJtv2%SO6FI?8c
zE@Q~Mj5Y%US0Ml@82Z3mutK&q&Ns4y{YRH9-5!=>Zc&}sov-ZUlp58DBe8FJ635**
z=Z5h<TfpV0y?kX4r-r7LCHQuOYW?R_-zc2XB?oTrR?z^19)@iR?+WupRjF?6=@yMa
zmO9s9+ijWd!M#^rB3Su9Q7y^*_5b3VgQvGucDIYN_H*&x9orWdGvD?W@Sv5zQ{0`<
z%l|45<va1*V=W?NF)+T}HLIv9u#L9j6laZ2x^*z=Xa&9yf#KUa=|iW8BsMY;Ln5j1
zksC)y^rTEwcB<;X^G%2-UdxA)16Mu*hlF4?La|9?d>xr2v}ApgbV!rMfVYavImRdE
zuvOYzKMO#hNnds*Q-e9xVOR*qX=&(jBK|mRC)@%N-xQp!uRv>k=$qrYNVr}fAIKHo
z8$fY(DQ|;f(<?}A&(;54N&X&BY7ITUcPYAkkxDv?3MM;?iuIc3M8Ry1vAL&bom7E`
zwNoboSPV&}>epqiFUNWG*hYumm>Mj2%9&t&89a?SuAkbLM_mIGmVezW+sxG7vX
zS(lZl8;b25JL6fpqzuZ*z1|wsH*gNEI@B#1q1L;kmk*v|xoE|E%n!6<g4%o)l>WIe
zpKL`OkFbS=Qjdi!p*kWPmOTB<&YJKSBx)=%M-{e$?$~H0B1;rxW&>2X+~Uu$u2?|B
z3yeuHItS;iyn>HvA$b>}h$JH0!D41-yv@OmzWid6_2tb$f~%Z5Hh{~QG^(S7lN`he
zb%nxKPXfB}=X`_aiSZ`S;JHUWQ$#-`=F%jqX#YHmk^_$q4yhuVtL!Ts^V*C(i?{J*
zr6rQ2i@IIN7qp?5`p*OZY#g$rCfN0ocu`Se1Qk^*iW(DP17X9rsiZ1)7J}PE8V@`C
z7f_eYQ&)>4s?@E={x-+sSUlaH?*%^4OH^r#WH?8^J(rh!N$HA#UC#NRMONLjm~^}W
zzP#16(ur+^$LJL~F7R>KH5>x4qi60jNvq=lp~ggSuO(gF)ca5p3(R_42?Hvh3(dvt
z*zwyC{Ij-vw(*fW=%WTYA2^tO4y+JQD%|-7mJ1D8+*o(T4CpJ+hay9#(E9RX<ix36
zAelsImAc?%707WivUGNkatsH&N1ckQ!mzE_oa2=pQNTBNc4*Qr^aUE}Y)n)Rg862%
zkeZHm=sHWbu(7Z@9M;gL1kJj6Z=sS{kG=vjU}DoZF=J5|MRaEVWmPk${4rQYYHayD
z|Jc!)PVsV)0A8(9BwMY80yrkE{~joH1dg1AU_+Y@0=I$I1o?);Q*Uy+FPVz`$D0{Y
zQ51gW6H;{wD7%VfT#7kxn+vBsxGV~$6EfHQBHvJr<Rlc_QjlH^Y}Y$3{S?o-+&}F6
z_FgC*Ona;7aY#je1NS`b0gjgt{u!~;XSfA0{(ya(do4t0dByxd<5uv?pW2BD1D`8-
z%k@tgms@|yPrFy~rt9pK*y=8PkCPKU&(q5FIk5gBo$|tQmmb5?7jpBT_NhVl`Se0M
zg17tz+7Lbc_i?$vS7q0)DN3q8qB72xrKMH$zMyZTSII)wWlp-qh6(X5t3%I@`i}qg
z=e!F`5jnBAaal`O3?LfcQTZB1=_28F*QE*&WJRrFNGc8d7yK)byEE=2<OcrdveBku
ze`Yc>?5A=?A1TAHF6Ypub=0q1^FyRcIlUsQY_$AgKyt{l&bP$K;FQ1M!FH1bx0o;=
z#tG@$v$W|X1Fy1gku9h1G&e1iI-S%^1UT>1=a}zCO+xH96{W|X;$TdkoPhQL1&25j
zj1!{+0jAQUsJpo+Sa8EL$e3exAOnH)`{E$)Ps2Z+cOTCf`i14p5Th^mTu7shuOJCS
zP_YBaT3ZO<Zk^6ifi5#ZL`bbs5-dDqY_3YS9(O|H+Haf{EX?D)AFg`v>oT@;k`=K+
zTkd>={HhhzJ%{9W<Tx>F(~tGoELxz@MLE;Phbb-KV20&uEV;e3c?P#s&Z9vX3gqA3
z_6Z-;iHxQLj&oM$Ea_QO#xpLzs^5p>O|C1WP7#-r399$IZCpxVw*$L6-6_|amLcz0
z=97Z6jA!gD(BV4>nC}I4zB32XHZ1mp3wWS?DLCrLgQ$M$#P%hthBlpWkmdE75+!uB
zCpe*cZkn(zdt0$;c*f?{6zBR+zVsGaPv&LidM&n4>u!bTFHMS=UugK)-1TwdIkEX7
zpV~Q=U9Exi!fCFyah}_@sU}u^m0_B9P$S5GKL22IkGS_K{!rm-M^)cUNj3x5BXDD%
zw(>-EjdS~>*e1$FL}1E1nqxtcGN<Hy_9GzM7pU(2J~I?`=m%XNGs@u8Uzne|KwjZ_
zm&qXyxI>i|CiwRLZ^C@U)RX=e(XA!k3+r>m)bWGtj;6X%>=J%;6y>qG_KO&p+FxPS
zKX?v}ACO37B|M!d;kAwlDU^|k<Dnhvyg~YP@%HC@QpnO09^)7SC)*RX*!>9mqJwM5
z+@enKjFHaWjZU7N)@woUde6Q%O2P$ZE?tHk3{_liD4`5sPU<Tc3VyyfeAFl%Rp1tZ
z1U8EejD@ZvnA+!lWmBVvQtc4o=pHVJ`n>$NwC0g6!=<d(%agnvLpK<ug@cm-y_^!v
z*+gO=z{PL->N|hZ=!weM&ihPW|2Ar3H6D!b@=fh(W5bL{AJ|L^VGvDhx$|=<k82Rq
zS*f^8&?K9kdI3kWT`+Y3fo3xmM;=9M)uYdd&I^E0-yM=SH-CvTZLn8;?jR6jH&&QN
zX7WO$S8eo!V#D_3@#wf9Dx`rTx`_$rK^fS1isra*Q@eECrqPy}k<SLREjPqkZ7hm@
zcH<ZqI}Fu5+0Dy^WVj3uVc+k&{A2T1S=3fg-roJsYwL3yrfa}uCR1d_%_a0Q4xheh
zFwgk%{jK2K-jI~M_{597Jwe|jbA>6yd;LIy>nBH?%1aEo+*aSDOUM~YyET5Bh)i5u
z3KyIB9H$f183~a{T&S=W9-VT{=Ni4V?2=DeU%QXv*sGu&G@)<Av&`I3taedM!%$sJ
zQ&$)GcGU?j6X|d_&Xo2HsZVr)zT#wx3%y^C`j|11JdQ~R%AMKqroh^Vj~BFqQgJ@|
zXkMbv4W;QMcJF#7s2S)PP8{q<=k@Vfh)h?JR?)2*CZ#gjgJ8;|*2v>^D53Pv!6oY!
z>&k8y*@M%9xsGBn9$5aFKB_@fOApyaFLIz)%hIgBuKTwokPXwMxO~R3RmM1oxplA=
zy$+!b{O;t=vDp#szqdX5oV3uJ;SOu;;nQwkxXYDK<7GG2U>8;K32hJsa=KLfzD9?5
z7qoO;WL!^<hXdJ_^Bc_ShYaI<ncnTlaTZmagcvN;I75fWsVhEFR&DZt-nRe6W48TD
zvwS(rJYm%P7o@2^UL>m^IW1IM29bko<Wqc4*~;b`1vu(WY+v|qX(?RTRcoLizA>t0
znRHuW_4+RIKhpk6)>5~U=yHI*Lck5oDh24j6WPT0+}#P0UFtcj-nKgov2rlGF|?Pe
z*dpwP4^gCgXUe;$9bF?7H0|0Xf+Yr`NN27vy%|U!lgdBz6VR@%pX>?+wwt-hNe5nM
zgLiR51$UyhmvqtLY|k`*$kscH7Y;})MqlhvEU8;iL-w*zDk<>>{;-rFwb6SGPxP5D
zH)kHf`vi}8rY*yC*PaVfPN%~S*n5jh)AXEyS^ADs3!($p#U0+=;bH}v4>!T(xZtHf
zx0>!tQH2>pBc7F;yBL=LhpC&MOQ@`17K<8rV|pDvxlV}3CjjS?XTb1`<xX2r-6L44
ze|3{Hs5ak`y)8TDp2;f9)SWY(l}~Tzy$X-dU+o|Z{jN!?sE!OhIco0_u87-u7+2RM
zliS;+ESeuLy$AW_?Hz_?O-zpV3%5@`_NQH3BZn{Fv4mv%BLb@*&xaB^@3y}|4F0$F
z%rBOm+FrT0e(P1|4=BaR8tWSqN*jGWO<!>=9Vpd&oDwLoHTFcc^Ew-o|5{}1F@@jK
z2Nf#FKoIV|upiJ+X)0$OtdBmG(nnr0`?_tHFC?m%F#i~qT6%KW{jxnqp@;!py_fH0
zqV8f)JJddr2Dd3abPqKyl(;_)MYsybpBbcyO&9h2{_&i`KtDwW-gGp}(br;{NFyXX
z{O?6uQF_gxdk9r1{CJt9jr$MDb~B&tA2j<-4`*^1{1h7UmXPiFa)3fDHF2}M)^P5@
z8kc0?<n7FodZne0ydZIV-)iW(djM5xU(1o+xcW-$rhBAOq>bkewC7=oaD28Qb5n9P
z%#-{a$SUhiLrihu%~Cyu>Xs4e{$x$bo6-CVZLH4?LLgZ<s%r!qUu@s~`?(B?p!TAO
zf?7V3aS%HHR?qjF|FuWePq5%>`1b_;hRsBTH1CLzL{Z|2zdS(iSI97w%i11s-&*qq
zsX_-R5x&iOCkG7nUy#T8f(>cLtLgRq)Hx#2HKAscWFUzJm3}iI($ArhIKf}0X0m4P
zanVz`YV%d3yIFD-k{BFyMh%@PIu_fwId0M=M~_K*eCEWQt0N;i=TD%ii5FrUK=4=s
zL2~_vNN!C5&9GA@7q+z*hVAqyCRf(ueoK?pB;{Ec2ne)doIgs#Yk4(all*>UnzlAO
z`v8)Blz0tJ|K709weEU=*RSKZl}}=8>aL{QiOoB<MYXw$^UT2M|L6;7r|tyS3=@)E
z<S@yu<%pJ70rZEe>;<>&sHJ5pXl+%$?fJo(r2&mPtjC>J8)ExsDtRJF1m6C?O<juL
zE~9qdX`j&?=&T+-sN-6K-H@!y?-XKNQ@yXcR0IHj<yF-?eg)~m-b?xpS1Ry0R31G9
z<z2C19MJTCN>K!|?)TK3^SFaQ9OKgJf%MRct~!x%C))bH<`b*A0@^><2CQSq_<Fti
z1VcT0%HU}!y&j}%mM`)E1YFDFS8@5w<#VtfEJrzYcDEf%JGc_J`RBNYorJ7(e<+=0
zpp}B{A*8iwo!e8M3}or`sQ-4%y0Q4lTG+YL<vX^Xz6AYa%BkOMDm?C0JG!@3{2?+C
zRBqcTGV@R|F+pStKQE4DBG}Uh<Ljd=wy;pULxY*jov!0=sZGyC4VVH}Pm`@|-DC<S
zZhn2(-5#8%@k`&F$mulq)+RP~Cs&p`)vuAKN_;G*n<Zt_ON;pTM(}sOJ8d{<EM)a5
ztd~9Ki$tVj{48TmO@TjuIt+tW#s=IOqg$_=tUL%DyQYj)4~4E3e@3Q?qX6TnUn6vD
zt8Wo`4!e`O2EKMYw_2Q$gLT$Q<WK|mpVFrp4k&R0Srd0(umP<Emp}LEr^V<5KjJI8
zHvfxXejp<b2{-Lsf;0c<vuSF#6=p?s`G>UAtrsjaUkgft!{tt&)%Ui>zMhG2s`C^r
zWC~$eJ2d)Z3k1@L44h0ah%-TD*v`AQ)*4pXPHLK0f}s}gLz<+mjwdHu2~f9U7#~1%
zGb23qaJWME%CbfmIL$FL9UBYTF@=0Fb@g7HVcrRExOwZqv?uLxVOfKOwaLoo$A6qP
zIv=klACRPn6o&a$I|Gkm5~?i5OTIBZl!=|Lsp3%M=OcX$9Fg|VO41EgrGos~D2GUA
zn2HUYuC>g8DghrO!1pyS*#lo%Wd=r`J@_m1dwU_gG`DidrsCB@kDO=-;G&}EUS9kA
zy?5FnCO30>=X5GVpT3GbZ0}J5CiZg>S}m&v6^ePx8O5XMHqD|tUMhfIRY8>XwL`Qs
zeD63a!iDcIM*3EM-V1Ne87?%vWWBgVz@`0_v+9D3xn**9>T4WsqGD=TQ#dRYfnNnp
zZEV+C5v*R^A3m|M4SfG-&VU+QUOH?|S^C~&q9RJ}pvctO*nd5q>*C=C%oYS{u(A#4
zCCF+|$=@DTgphd?MVhYp_b~I%?PTp>yU0Cr8Pux-%O}0e;=_0U4Nby5=GB_So)t=n
zvOVLQ$T7=|dsLwNwkPDbKT~z#B&MC>@@cTejFgG#1i4<OGE<~oHA2K}UXE{JuDP=M
ziIu_i;8gKk-cgB;s0K!-d5^ds5anA7LS6hHMyWQ@a;gihqCE<YJ@7-E^x*wUMj*?!
za$nBh6OJPX-PV>bV3T@yB7p(8b*sE1yhAO!z>{6e5%hk^lwtn%A}WmY&a&z+eA9a|
zCK<Rrx6MyFUH{VG2RFoJ4Q8a8tjGP!JtMw_2yGSAICGXiVd*8kM%!{-+caj-7s-$B
zDQu~Ek@VYYC7FuAx9zzebDdzXg{63Otc4MA&2sEJWBhP&9d6STl6p{H09d9YlzhDw
z<K?sG8a<&aZOOQmo)Sd!tEQImaF;3!e|>M3odT@yBYGa!P%UpU<yTE{Zj&T3F)Jtb
zz%_c_85AAm<Qi??b*hoMDf~JBem0Zg1ox*!M2J@~`p}{=fP9%)b=xd@pr8ANWF3AX
zbyyKnsT8&1(x3J5Fh;&M(J!9|oyUYx%6)k61TY{!sUo@^jCgd+S%>{9<s=-h{me{V
zQEKLauT_$Mn9oNIoH;ie)uA^PIuA#+w=j9s9R8n=gBw<8a%Xf+Udb#y-6U<L<MmAU
z?`4<9I|XSmi3#kwrpT~rNEyp{*^HGI1X!-^Jf-BQ?`4oy@O;o*VE3&?*(;UW;kr$6
zUg-So!WzE`DbcTZ-VFH2)Ar!XKP!ixrh@wb2fxA`7X9sYcJkBF@o4|%Mt}D2bEq&7
ziQT8XMo9(~r=pfscKR*w?VqeDwV84%o`Lo^W4m{3QlBGV*9!e(z_pDY?A7cD0(soC
z-)Lcs?mE8RA2n=-I<dk^K{O4x$-?IIX93ENYsCtAqP@V6xwBE_4t5oMnLlrFWb|4K
z1%{6e2-YFtQk~+y$RC>f$$)bYItKF$_-%@nv0~+N-GMTf1HdFYEyiI<DGK1~I^`#a
z`j!`JXu&xUd$I6+pXGz0>@6#{DZc}Dm2VPSU+d5__4_sV0zb8n-&>TxPS_!*G7&EC
zD<f(qI{vJgL!@1uM@42Uv%seFayU~*(Bx#{sZzsuKMA_9QC;{t<)f`H5J6nPT-1&^
z4;CqdP2}g5XED8Gn<&z&=Gb@CK@^?N!>A&;55s?WX}YZZzyzWI8>*nlUv&kow23Wu
zg^qo#j-x$GxA<PfxlS*ks(3YzEv5}wI#1i?gb&s%1<@<mQe*khp_(Vp%k6rGcAv$)
z$?+L?ylKAs$>)yt7r)9cM6I(aIzRc9&&HK(cQvEs`TDLuIYZCO*<^@+Zu-0_;Df&Q
z2eG2qm$vslP9P@<-d-<sp?>ZITvL$hyWCq=UT@$~)`kq6{q2Hfp>)SgWcrQX$@B-m
zlYxg+^brVu<O$_MKb2QMPXb2QPCr;XmjjmZvAQmDcgJdOrC-er{%Bb7?IP2p<vN0(
zfQ8<rrY>T|&JTW27Gxle3!aT*36#d<+6FBfz#KSw8uI-3ikS_EH9o|(@Ma1mikhg1
z!Nu-AtVH-Dj>`xJz*eMF<&xR-)8ZiLkt;-n4l^R}nA58T)Y0sJnrv16;kg09WWr0=
zP803Em{oddAiZlaV;);AUr@cx5>=2h-Q#AcqA9(W8_9B6KTM!!rZlca&IGw?A!Hob
zU-1x(ryDght0+f;Gs`yKp3anZI#tR*f&WT7qt<pyLnLprK*Jg>xrUAw-l{e@Us!OH
z3jEq7tYDmg3$6%}jJ0cUR3G&6t`5ewmFME_H@?!i=6ff`XEA(0o3a^01k(8Io(9pF
z@Z$7N>#w0*L;JIf`vd3U%M)+6*5F=yzRt(~>~MMs1b<VbC5?16nQf&PRp_!~ifVk0
zF-||uZwwM?i{|ps5uFR#gYY66oLH;O(-D-Lt8aJGA<*F6NJRZJoPOL(`JBoxm7u=a
ziD>2WFAMG>1+|9axZfY>1x5Q#-#sdjO;-KmneTP;SPAuFtUnTR_`zEbf{^6T95AnU
z4yqVzw{QU6Qqj&F#qW(O4UhVsLOI>O=oyhDBY%rq6_l-Jrm4O;9gNjI4iTh}Jr)K*
zb>AN9!mSvkD6<p?Y=90Vdk6ZOTwAg>+dvvy0Of#=f8+D<*V*Z@&cb?kkC$th+03F3
z{VJe_B03m5>Nz&fK<6n_35=S*m|#uZ{c}OdV?iB^ujhpsVm!|O)1_!%li*k?oA!k8
z*O1q%E8kZZxwn4c`~)`N*ljj6d5Ah{oV?IcUJZC0WHbK&obWNvNUxw?z^&q;<5&hl
z?+4HBjbnjZTVr7-mv6UZ`n*fbMc`AI-F?K-*{i<*MTMg9Y8TJe_XuRAWbpb?ME547
zemVhwGqqOempg;n+oX<ld{J{5!cnoPn)Cy!McZzWJHRFl;=@J7BDp+<@^$iDUm<pE
zBS4iI(XBzf@|zr~eL!^){9WI6O<+k2M3~k!E-SlmH3s?zX#RqgGMEi|ugFyB!)Z0*
z_IBdYHxB9YYg@~$zgr&bl{40|uLPF2y-FJ~-qm(o%b<g*dmY3ySZ7}iGSi+psS$|V
z0nTf4pW-&dq`Lin{bV?@`1ug!zKkEH-`lc$W>d<e%G>YPR2?ti2CMZTy><i&Yg4v|
ztFTtdns>sZgJpiHX?21f4Hs<rgB0VGrDQ5&1$0o<k8&9OMSFr+YmiwsmQzI9a-Os}
z*>|gL&y*JJw=5aJQelXN?_;b#ZwyHNjP*cBOojg1Nj!0MoHB0+fMYl2xPHJgyuwzS
z5MCFbfia^l*|BSHL@EMxgCB<)h4~0pjemFBQ6mSi0qZ5`x=$^>vQ=qeJr-@X0`h8{
z_x!jO++#V%I`~vvzl?g-hbH)Cxk$79i$A>0jCS1y8Q}Ez{TN-B;_PC)b=8Ar5`=j~
zORg!%%JjSQ=vRw$)(TMkyo(bX%RS{9NH;UqHn-sSvd{CS%Fhhb^&n+$)%}uZl!;UJ
zN{7$1i2|Y`kw!7{UM$Kp<1ChGmH8r0!i83pL6%f1s{wM!0QHX9`(r=W2e`>O68Z^t
z*J>bwDdtI)JA(u7Sy!ZyPeeY4XjR_leEhv~8)RNJ>O+_;Jj?1StU)m0il3zSEqv6H
z{MIP_k0owxWwxVUfRq088vKWx<J-Gjn@4NA^q!&=E-B*!oi8t<#|*6)&gZu?f9vi<
zj5}%yOTz7`W_aSdIf;Ryn!lH-B080kTqs`;<tw>T9usaN^T(vx>hnd)@$@Wt#nMF=
zBZ~P@*)6vVFt$tm+q3`9pCbb1Bq<|;dbR2FbGMw`p_Ks_m{7CvPWk>o%*PRo0`t_A
zJ#x5{2lI6%lD4OFXqy!tAUKMz2~5t@;0+2J_ENSH+5M3b)L|L-HTW@t@+XP2Ux~Fg
z>Stb2&$k2rbi@+%>f*{0@2qk~b^dEM6q(Ngx-&?1M0A;yV9VTOeXHvn4PI?&3a?Ap
zaXd`TwW@O_foPAnwXCTW3=P?JX7lBk<_b~oFYI`fR=rv&PL}4ILvBGHK?UG-#gq!a
zgU#op_T&Apl1(_Ivjeqj=U@Lc6GGHoLEnjOVs<s<_kp)ucj7JQ9&mLv#1F-_W!Kzb
zumKH;zCw$*np=bu7iOiFY#b3h$$+(hS(jB|P377rfgO)vzPh+j=P8BBI6pU61tbe7
z8ZUR_lEpa;XZ}PUv2nYlF{=jPY%P>`JXz?iadmp|aO%Z(Q4)e~LDqxrui>;;gW*_I
zAF-4#24WE{+Mo;R)^3Zwa|p0BR9Dftrt(}UXn_ewV=p^&B3--Zr<*lzkw|CMlK0<E
zH>s5m*&Y^HK5sT~bE?HYIov7(;aVzfbt9w=gO};!+R~)I2#DFOdZ4cFw|hGjCDVVK
z*UV_lB|{ALVnaN!BvNfw3d*0;tFn2dP9XC<;fdJrDE+Mq(fA#ET(Fz!+0jrs_0N?x
z(9)2L<FxF^LKzy-!VF~@-FR#iEVX9hNdN^oih%$dnG%IHzlabt#=T+S<58ULk^UjE
zIX-sVTxHr(U@K`y(F7axQKh+2sZxEKPiS^@BR?};`oPrcC7nMw;ED@_Y7E&9dHUtC
z!_{nudZ8)?a^lcT-yYw$0iV}SO!)_;AGWmGpJZ!~pfoUcKlWbZ)a8vA5^{|v+A0n#
z3J!+kH}fuZ>wo(zcjy8cK324(g_VwVDRB+>%BxPzN)7b*Ye#@L&u<t#ocvlx36aZ^
zeS3yEzl}Z$`K6$OC@GW(oRXID-n6XHT@(EwDzDK5hpK$Mse2dm=Cd_o+T}sv&Mi5;
zcXLuNb9=o6Eq$fy;2G!f^-b~}Hg^_(e|YqoQ_w@~u9e`VL<<0KO6#-lFXE?S!j=DT
zbezfZj#b_72GC8L6d6P=UpeJDui}*Ho4$WlUv}{_l?^W4js4PI?qYUZng5u_oNV3<
zyeHw7E<^5b%0iFpo32HjWRY$rN&S^sx|JE|hrJJHo8#D8Td4dP&DBuWiu$bg@WiV0
zn(pz^telM8_<5t%^qs1`QYP8y2TkHt{Owh@Wjv!RPM-Pxtq@3w^zQxUw!Or(`E5tb
zd)Dz_4_^5})rHwt!|^?R(7jJh;&4MpP|8PmQwiWaa-%qXyROlhBoIHHNVhukEcuX<
zxr}`%1xP~Kd)bL@e({t`-I0%!7JW5lyO1|X2p^7I&w7_#qXxk_iR|*(*8#b-e?sa7
z3Skl)Rcq`a!C~2!nec|Ol_f}{kCqoL0BszWJIunRdYe-OAo=EgRg?Q-xOE7p*CHU#
z5fuU+r@c~5ORPx?7|;E4T&vY|ey)G0R=m%N@OIix-VIsu{t`B~7ypnPv_^U{?#wpc
zqBir+F9*k>7*1j}${lRj1kuYB?mV2R+;xRwd)ir7tp(*CD$K!_3JFy!XJcpSjkQ8b
zL30DtMZ^}gYSgg{2F;sA5|QJYQUNb7%uJbOEooz|@mRx47iR4B&8a|}ZJqX;Y<$_F
zfy=3YE#R#S4+_j2o!?b(Xy*xRYDRGjLOF)$;{5p8ZHTG)CTrGImd`<qi%oZ1AQn#p
zN}z7*VcvhQqUA<dSn5shjFjHDG)|DwQZeQh!&Db3rm@W-QG0?_pXwJryH-b#-xP|y
zCvRsnjzXx9|E-V!evLSZH2oxw`ht+gE?Kskhl+ElC&AQ>cRz%u8wWB!bght{nRI-g
z<YtSNm4P$6y^kx756DDDRCMvhUL9TQI3Bn{wZ(?8#(ocseBXVovpGxgb2DCDSjou!
zE<ZoaLM;2`;VI7wh264MERhqj!K@Yx94LVB$uhCFs2=OVej2@R*eVbd(~V58+$ru4
z@wUVK)!YTgiDkd7Gp8n(=?pxJo1T%9;d+=;_h+UvI%SN(UFX``yNS)6eu$4ek(d3l
z7^D(1*05ysQYP880GV92(W4*}S0Gr<G@$VAq8LH&V-H;M(|RD~q&sja@0OD!5?5hs
z`M`rV!S4%kV`kTK&p5m0(Y>~j=F%)gY)VzG-0u|O@1Y2VpA4j@qvirRQ4E-Fg0K<8
zpcF_4l~K&>DoQ6;{|EtCkHwyIF4Rf96iVEKHj|L>1|Erms<@5W(owQtD<Hm3e;xsi
zaFwo;O+Lt+&Jr9!fl~k&b3G=rRDj#d6&gk{IFAz7E%1w}nlO8Zj_EtKQI6_Qg3TO5
z3N~D{dK19!;&{i?wlph;;;+aeyRxQb23Js4ftHVA<82hj6(H=A9e3>6XcCtleS~|j
zx)$j2U3c_sjn!DDatE|*QMscAeMRX~{F&3m)Fc25oH|!l(Ns8Zdj#Wh*<}tb^RoPP
ze1E&=B5UM#&DENaTTs=bjseVL)MW)I1M70jwK-BWG47?}C)9v+JtH*Muh(f!PU}G<
z^}gX<1xkqkOVp6GR$8y{*TRIYd#)L(8<^lo2ZI@*QMTkXe$?3&70TlVGB-&pE3jjG
zIn5!xjFOS*zkGV`+2IB>+$9^&=zbL0l08`ZQ&Eu@;@1K7aBTe>7B85&+CR;Hp!DyH
zNE%yH<JzfpI}%wa?fX##ngj-!j|?k`o7kk4`Hv{~vg>J{?A)v{KZ>Y9N_{0;tYo^2
z<YbtL+1-I*)%5Z1eBSAhvV7?xmA|BxGijC<$Bxc=XDci9fEWGTVY<f?5E-Sl{Ew5V
z(9>@xf70dHfSXD{SWP~_i4Ndjx;V_dv(V%XuQI{nHQ}4*$1QROJsZbnlH=rs!c&ph
zgWeG+2cn%3fRkI}Fk1SKGNNXw?AqV?q8}x*1}|)Qm0Zm=lk%oP$#t`BNouM1zd-es
zO^JP0H8S#pUU%WCizPkk6V1z`5d*{<rYl6aUo7{dM@F{LBQ|1r;FZ_90(*psqopG9
zraL0(5XnBKNATK*4ewHt{~WrP+xP5fOJH71{f?D5iqPGWFyxp*6rN@<R(ysTk&e!(
z*-)9{R@#RmRTlk+EsYdakidQ-qW124-R?rdt^SAFt?|-yr4&B8^<4_go$$F502`{x
z)>Vfer?p2rWfN=D#Y}KjA3G!^TTQnovjp_BSPO2kkYzrQy(2^Yf|h*YKi8|r0_Bp%
z-JYvT+OEuyZJ{5vRg!BBB#M?C5Zz3m(%U#wb)3%wmDLOcAWPlFaJM2_3$>oQ63~nu
zhI_<vUx1}WbG@6FCJQC#E|@&9*~~?ZIBOR}r5hirE#@Fl)cdTTO#<+i0*UJtLjCox
zS2B5M6O}s~1yU502TU1MLPtZw4%tGm^K$si&6*n_=G}_%y%&bU`*-B{$0=W@bpfg=
zaooPC?^Wr8X=<=L&)U93IbF=M9O!BWW_d0<%2aOOskU)p8@MS?7kR8-Gw8I&UUGD8
zd~@+Ox;_$8a<@^0ct>c;RJqcuA5az{kCOT0|0wtO`9nB$KHB=fy~!+8HRg^@3oo&p
z@%Y1n4!4Sl-+nz@bS>ArUKA<9EVPk957qXp4ELB}=P{8Vu*~7d<o*mz+^nzh$a-}q
zD81eIti9|5*nX2`SYW`k;K06WUdkcMB`ZFT1=jp$OZM-?wXI%%aGc`r9sGBZH`J}j
z<tExaUO%k-QBgG#U=mp58Gox|iYjDyqd+3nc&3?2d2c&O#Ux@!lXYyx&R7PHHhv;T
z#oy5=;qc7X!n5|xoSclwTbL#K!7kOM4Yex3q^YaZZIEC(aU|^nEz2I6Pfo9Sy#g)^
z$YAH(daz5cs;<lhVlNo(|CC0tL9-ZV8`}GA?BmEl%TMQBNL-PpG@IQ1Yr>}icinC;
z<xj(l7^GyBMDgIu!Pt?`;TrR&IEL?d^QmU)2x%c_*P(s3eRO?Umhga;4X*`Q2=vd=
zn$|UixNf3Eh3TP!iw&v1ZP*c-N~5a`-*vSNY^fE9Yb}&ue97wn`<m70X%2z*a`84X
z0%EA-qXlcZcx~^05f+`90&u+Y`cIg1*XxMi)ve5S9%_WLz@({iqaf`<Tj7x2EI<qZ
zIKA%jqMFUKk#0&cG1qj;vfx0~P~--(t<>DCey>rc|9EX7U^R2tYl)d8xG_@yBFcOw
z?GKIB#O8Wdx24Kg|0e#~V%H4ccP++HvuZA;A^kU@K%E;kkD0mNlRrk#;KOW~$37i$
zL({V|E{%?s9FWWr!lkV;qqknN!v4(Uc{_*|95~8d&Qk>s?tBCU#2sF*&~=IRq}_QL
zICc2Q?W?ZQ*xAKO%T0x%+5OlL9L!vxTbIiLjUPHI@_e;%0OT-E=8r&APw0mC8c`?{
zF6{D%2XnB;GW&X)yaZ3<;bj<&*&8JnpF&2fcoj?kWW~04l#VtF^0PZ^mK^9;EJrO!
z4}dLJs*ai^)aj84Y%`AR48T_s1^j~Dm_PSs%f9Rv15p2nIUy4iAbls=A;;0tD#q57
zwaw4x{oY1>Tq38__Dhb|C0oKKO4($+nkiie7>m$&qUf`>g6xDM+?NKGS7rUap!j5&
zKTSL#Q4#?=qv?}xV6lE;(T>eg+09oDkHGR*{0Ng1YGWzu=#|HfPaTj9uFxhELfOBs
z)-IB@WuEWLkMH8A96=d~LT~Yw7I?a2OQ-s#{{ye8e)h++YaR}}xW1M@vv1iS8vDs1
zjpWgiiR`8Fe|^k#Ol_^^)5!&djRwhmF+}@Vt$}0E{f*FK{JV?yahy~St5z3>`B#Hn
zvS--}Wl<F#md4YR62_4pFG@ROcetibqk~XiH0{t?S3mhy1pKW18Q#d!pugj1wK~r>
zJ+4GvWd#2K3DONPoaXY_)$g~GL;gC@rV8W)Wuf1A7*%S%W`2-d^|t2E`?G-WUWnoa
zUPJ=Ky}M9u`t_D5BLBst$LIA(mq>*v>5y0R6|rkysZfKbInhXH3}{=i@DK7xT5)?R
z5|=M)m75l$E@XD6UM1PW>87&0Y+nm)zmUjc{0FS(*>|{CC668QE5?u4OZ%?EPhX3&
z$F1+n1)@@~L}W2Hr;Gb`m37XQ87^81`S`oJpZt(;IJ2AvDq}0|Y`7uzP~SpP1Xkf`
z4#A_O2HYYkCtH1G{)GN!U$H)@$~f+)34Kh#lQ^o8r#q~+aJN0#lVN+Im-O+A+hU^5
zPiWHzJ=%%9KZE*}NC11nsi6xm^_2I9yd}Bhf&p;hNrh7$oe_t$2Mh=O9M|;Tgc^GH
zsBH}y;$G~zD68Y2?$)Q7nWULP#I1xlC4t60)>*wh>xh!qGeh!h-fl2cS)tvR-d`x9
zmn48}1vxJje?7oVOQ;w%>?fQD-_4=pzsO1Kt%^I?F7b;H2T+DYHfW?Jt!404qK0ji
z#P?%Q7UmxqcKK03d5+8?frYFO;lX&BIFa0L`Q|1G<kM^})8m1fO}g{#Wy|41@PA7N
zt&I4Jv0d9hJAI6KvVX2b+Q0d@i@lbhhL0CZa4+)t1P|${FymU&1LN-=>8GRV`Ql$Y
zOmEC@eT=izH+0zTmcl<DwRJVTh%RlBe_8kM8crbVz>Rm)DCfZH7@$(-crFG|QT-Rs
zO?YhQl)2^Z%&PkL?xltVCH&g4B?~Y@`hM~O*XyanT&F38?ATbBr~h=&mXOch9MB<Z
znTlIfC!$B@xf8Mt2NJKlHCq5siNc2MbLobGVTZ1T5kUxvyF#I-On%mX+(W^3K%(>h
zj;Fb;g-;lmG8mGxG7H?<0$H+s#%zucNat4(0uZ>5gNQZeM<}8@$%QvaPKlCdCiW{w
zSp=N`h&8Ij)sp|S4|TkWT~H#jQ0`41F95-W89R=BG4+gW=-etwjW4JcKtBE6@ug8K
zAptG9miu0hpK3ABy~7(mW)va`6p5jU4bycQJIH)o$Apj&9OXxr+tQ9Q!58j<Q=Uf&
z?LxGUMkPuU5!12TmQ({TS*JV*P6|0WG5klIn@98u6dY20er{*r(%jj(X1$|@%Ie}F
zH}sqlqTo~A)&l%gp}VqL^xNjcCq=2`KgeA0S4tlhvGp^K?51HlOzYGn+^>%6TsIW`
zi3BWnw>3G0tP8CFmfp^J!G_cpi2ngX0&0IFeT)?6d;Lnq%2k_hb`1GwYqYLKTJ>Lv
zP|lt4-lCJ&HyZhK89lB`kMAuM%Fn%O6*>IJ6!ci7?(sOScc_0Kh0t~u^%ciqVwd^g
zufAFU4KYrpqN(ER!`CCIh^SGt?Iy=5J50!7cl`BeSyoL%*=X>l%P*JuGdWY<3luvA
z>lyEy)Mi$12BpH7cK6h9D0r|D(|!jtb+)jz4O+=^e9#GUZq2E@-)Su3l^5+;vfwLX
z7k+A$eaQRHO|73=dt~jvh$eYY%ZR#H@|``XykdK9!2Tuw4*)K<wAVHxwa0pY$fmg8
z9MZy$m@1O96bo7x2R7AI^>~`j$&I~py!i0<VHxzII@p49!eR>}$f*Mx86|stKnqQ}
zWR0Y|q?HLtj>YxUaMm-@AMC2ZM<<$x4?^?sa@J-E@kZIrkslp6)V6-M0K}ASqE8un
zt_U?2_%*iW*x^Et)GPMM-c->dQ5dk93rUkNf3Am?)XVjrnS|L)rYC+l9Dyz-dU@&x
zMxU4_x>ZDs%}gCH!4G#VNxTS&hc{x@Z3Hjh9loYZ3YQWQ;W{pja2-%_;X!CbP%pFg
zawEdtZmnjC6n&I2Kr{6i8#Hu(-fViH5>vbF+4wm3o`wT>^F%*+LhJK-+8*Zl)|V6V
z{e7E}lY$eCe^sB3DT%^gtj%)V#qdy6eZ8}=y%t39y{j`~EL@3RWmg$5bmJ_%A{N3c
zv8I{Y69=?zwl|Tx|BDN*rGVF#;B1ZDL3#z<CQ1EednjIIVFv^|fv1?S7(*7J+=oXx
z)F%US4FBLxQ|GhK>IFg31?p|QXM;kM`A&7NeRBoN$BBsTxyscp=Z=W#wu0|%yh@tN
z?hJlTl)+W+MNuGjSa(Zm55<P5J#g)O>6y#E?!Z*D=r;)(147hR+sfHwCSoc-cYxV0
zqDj~_W8iJeMkHb{1<3$17m7WV5nQr}sZ(~i&@E&@2_4tjU4nE62Ez|>;}=IZmcpGu
z_kb7Tp-`px^NMPL!soND$prEP5K=;EwnW6Yv#uhs_da5xYIy6+eO=L8)d6>;c6h(2
zlP&b+rC?Ntk&lr8=(psW1&2i-<Y$$MDmTXurDPU=#F<GmeDe#w_ggT=T~s<dm>o8}
zQE^!QZl)G^@e60U(i49+QHuE0=ub1A6|%fwW6$bRQcc?;z44FP(_dwS_*B?VTAdn~
z;KSlyBH12apB3W@fURFRF~Wu?I<gW*o)eTmgNnZ=w7njz?`c979t%w0<0$ll4IPB0
z%h&acvdiyRbe6?uNwi!%lP)Oxad~CAn8KgKmAviup_(#gQKCxOiA(-ckv)A%Ab?Mk
zl2`RL3NeJY48l7q&yT2vL9#t={r=w3(vS*}Ow0uPe=!L)o-fRp1$uAxU;gQAfe(5w
z-nz(Y!3OR_9QNChZJc8Pjy@eOZ8!(ti<!P}T>dh8Z)FXZ{(d`lzdv7+DfsJVqVXe*
z=Rw<1uit#WtEO@5&aJH|Deh;<gctd)H@WVL8Ld8gWOQ9k@GxKaQV|k|hdE-it)ilD
zo;RJ&%i|XyW5=O6mzQcgsM@nuCnbTpY^HXC4t%3OAY*SgBL-1CJc*}5c6{hz|96y~
zJ+OljSdy_9dtK(V&%_G>CInlVv8BXzgkg6Pkxvs;4c=UGimBqK@b~QT>BF0UwRR+Y
z!*q7vjjcS~H5o=y%nxN$();p{R@i$yoX%C@Z@C4$*9hr#>~0NdFH2w~*y8eRH0aOp
z_3m;YGxqu4O;%}=?K?C!DTq<J8LQQtv;WXQil88hNc7n2%O$#1BUeCKvd2sKe3FMR
zU*Cj=|L$<}5k^3Z{;cF+%3L9k0O$DBcrt>PwrgIf;tloHQrPl;se(;(MhyD8Zll#s
zf556nss(8fJM||ngW|gBK1tx2UnO!Dl0k;>lB0^Fxn#HgA2d@F7Z#IMkJdg8R*U>?
z6#0RsC@rEJ2J(?I%{!CP4_*gSoHcDUiTnsrSJ{EF3=7f8hA*u(_V_y$1g$7F7|ePw
zZ=^b(IsFWh(Y|ocmRg@dejk%Sf6OdK$km9jsc6#tKkZ#-R8vdWwjqiFDk35ZF{sp#
zkPsjNf)r6yK%~S%F(d&(Nq{8uBB&rDaBU!>V8KQg5L6HpP^2rph@nZOcSxw;30wue
z_q)D7?$4W*l{MM3XV0Ez_RQIHR`Q$;6Az|ZR<vNil2IafM|JZK5$5G6@A}T@@ogF!
zqN#UCmtuOoJ93Qggv3*aw<gtY*_!fd!$aB@VTN*w<6UnP_WLOJOA`&k@%(}*b_PV1
zn?(;QMrxIiQ9{oRDhWC9v&M5Z)JshV9vXItD8@(+JldGhH+^0IVKCuv_qq5g{@(TA
zlN4z)!LNpme9|h_8*4py$2UBj{?wmlJcBEq;_j{UF&?zbHDwyO=gPejy3pSMb62yV
zMe5`w#P`OB)G79C6m5>W(Rl7gQo@+mW6`U~MD9<ztWJcJ`Jm_nN=e_Uu_?(@N7`9<
z3vcGm@YPeZ`&*L14I08@-aQkmSJj?8KP8i?B-<>&dZHd@Tej{iE4kFfIPE<o?TC=A
zC_m48*lglaTl?cTB#;qVhkL|trBb#COuSGwdq4;miR?Q^n|<+dVw0X@PS$hZd(Co@
zExh%U`p@dJQs>OO)5l%n6&oM+f6|29Ig{^8sKOktCvIyIe#1a+=rWfTnu@w_{zoj>
z=fJVl%3E>#)zdNMZpr7ISQD>!%?(Uwas&5XRxzx-tLWE=OfIYZ7pGlyvW>uwv&IS%
zecIeF%tbG?-=@t;V$OK@ZbfT+4!l<3@Syi7^9^6AtD2{=Uo?vC+1@hHClnOIHa&e#
zm)-bO)Fjm3ZkH9Q;kd7?us*v{@~EI%f@LfvlP>MjZ0nt0XzQEG3Tz2^@HIiwg1dh;
zOq9pomT_xK0?02jA`o%UEX-6Xb3(QIb!f@s=KQ87<#*P1J4Pz)5=&yxRbJj7bh5DD
zOYb0!1Tfxl4L9xe$UNL+y7fb7jDAww#!N*<kave~v~RenI@E1L-8R;jWZ!y4nVSb`
zUMGFjH|uW~G0QL*-!QR_$ecgGeDSLMJ{CmfV|a2O$qVVU8}HHorsAp6n;Aod$7fM4
zO(bn@VsJfy451uP>`&}pkI%>p&X~<TrB%c=?I(zhdj~u=+xK!8WZW^nSTCRndVsyj
zJ3SP4Z0K_JTSZIZrqZM6YbMOM*<UGVCw5_)9!N;;x>1yR2J)!a`IdJY-=HTw#V+Mx
z?|V(X0lG*F{I$wJJ<=l4{*4#ctObunWmD6s?ae(|8NT>YmzGGS-D1~h1+E$|j`qe9
zr(?i(E~k8b{!M?Aoc*WQ5oy`cdb#Ydd{=ygZ_J6UDWzFoE{w4{r;pr^({FL?dDNF%
zpx<;PlGleH`Sea{)h&XXd^eeNg|A%0KJ`95i;NBGy@%FVYaC^iJB|?uJ2KSo2+DCR
zX&+9?oSgb%ly}6K=J(>;mpJT4-&ZZHJtB}<ksylNq%(`4_Ow)@x1+QwVI*nd%D{PN
zv#iOwe%X?NfUV=j_orjq)|{*z+|kH|uhj3_vNx{>b4C;^#>Pbt9J22vWmFty*Nv{s
zSzGw3ZACfru!W|D!?Z|=hbch2{@HH#$tR=bnay&iCf6y{b&PMyd|;Yc-2)^$)SN1T
zZ<Ah+S*F=uIbm;IE>%*TXWO1{t2k1o)C^viK^E}VN(pGrEzgQEY(sQxf0)#Kw#b%T
zSI-tbh3y#CnI(H&u1ef?`So~!v-xw6N5#Ru*thj{BPU`5#&u#c=Sjm!p5f<(V!4eC
z)gF3}qVOe3y`pOv-u!y%e#NXhFTqtw(c%zav9G7|u$?1G%pID|G7q2JHp#s=O?^IR
zD$@{q;7Om|%#-1A^sdi!NQHw^ub(^~4_#5b6*H-i6s8`V#(C7zpT<MRv-brn9(*rZ
z`D`1%sMZkbSy0KIk6(69h9508cyKpyHzR)1={dS)JoAOY1<75nDbF*~);sFIc?EiW
zX2uu~O+Iaoy=^z@?<<CEeaFo8FfT7vHdZysfF_dg5g(`Uam8nglzNjibJ_Y^_(be|
zb>CWK_RUFWQo~pTku&D?rZm3$y|d!ECI<IXRN4cOAwbj!eXNf<%oMfl@Zaxc=2Nzj
zRfnMa=v^C1n!?ZKtWN2_8sNbbX<3ecX<^Gaua^BP<OyxivpL8+A#|UdNF8(i^<=pX
z9;^c>Y#l2wS1n>-P3U8j?&N#yyMZ&qGXfyDfRezXP3A>mqZV=DpGw1;<uoc+LUTvI
z4VO<gXQihbkGj5bbFDA^)MTEux@K}dHxsiVBd259_rOG@UCU#KgEeS1jq$1)f_ajl
zS!0*s+nvcHH4)BI&6oKY-W06utX7_kFbFmLb?Vqxy+&HU2K@?i945vvClB*_UE8a`
z-vAf$&y2xNSc&%7q{HWKQZna**@3g=TN$ZFhG__+)ZDi&q4a!zMYj$_Xv}9s=T~9S
zOFFxYN<zLzW;m}1Kf)`#uW~SDl_l4gwYhvVyN8lHL*6jYKK7UJXR-nzVPRwuEK@}B
zkT4?^TE=*Nd8CjP*l!>@r{2)p%0@@8-SUQO=UvQ%rDde=w${>A)Y>zv5&L=C<~I07
z<CPGGs$n#y^XPhaIOeEPK_sqai*fGOh_T7etnD|fWlL`rGgb3ewcSmN9>KmIHEe-(
zS5$|_sazlbbfa54evY7`4s8~v3<{l9@-KbE)w;V?)=AWz*L}^4b!MxQSMje1Uj;2;
zO#8=PuS6NFh^@%Wdstu;lUk4(uj^je)ut4Yx01gxX-K4mxi023ex8v{pR<_bvz%|V
zJX1{(%k355&z+qb(;9S|E=wP>nHW>~TxM=PkfxK2h+T!9JMnVjM6p=t%(JWNJJ{mc
z6A@p-Rs9HT@mRHTp`!Wib2iUjj{8~pRpxF$W|sx_DXY9~a6(1X17%9-HVu|1D_Sd^
zTFb)B@l2<WAJQ5%9>j2qphhS<jFpraG#!KD8h4iNB6l)eWV>8DchYxw-*k!DiMlaV
zaYZ~!RK=C?)QGv3_p~fAOnLiB!^*H3i!)p}Yc7lG;f{vMDvMedFMax;L3w#Og!isS
zcJF+CZc*+#^4Z&Ah_nE|+txAsouW+7t!KuD9J7kUneLDQ?SW@Tt*&5Z=^u^z)TydZ
zXD*3fJu~kUb0|Rq+Xv#==Fo<5E?XZz{AM%R&Ln~AdQ<0!!FktO8$nmw*`U6ZhQWZX
zbs&QW(#PqDK7NqWAS!s2eSVY`deg5vREg}J&!?I<`!c550rgxd@6G-RAKM_m3$C^r
zv4iQ+pcsEgmGauQG{?!cCksxRoA2t9PeJQHc-BM-vrIwDl*S*hj!q~oZT#S-?4Dpk
zswq1)j;W3!4L*%CVbBC72jc9ETNL`S6FbAee(oNYV5=uVd+P;stAfjBXG@d{rkauu
zzn*N6FBq|siJ3n7MK)_kQj|`|UBO2>=0~HL@ogV@?GBoCXf#*cHmwbah_ak_lPnN>
zCfezHJ<>V1ugwMDAXZV=|29!AXP@EdA6=y>{>DRn%x2$wNcx;h(#WZ@+4yOC{fox*
z3oKeRw&#YHQMSyD&bFG8Kv&uAAL6s-!eN<nQubPdVx4qM{P~$m<(5wjGvA;z^a%QN
zzu)k2NN(>lyOC{sd^!YKR6fta&3+|^UR9jd(OY*UgPdFxUIVUoFGPlAxv7LQnyQuB
zxkR`3dq^Z{+Go|xN6qe<Mr^Od?Ar_Q(ycA9e;R&kA4NHvf4!1PX((YBdN1>y{b%l7
z9ftMe24W$4^}%<tWf@7etn0h0K8|declCpG4WczhBX?xqNt_7zxF*^8*wM-p`MniW
zf~6xGd_p#T4Gd_aWQu@TPp8j>W8KR2r(T;%B#3MHTPSXOWN1OXvXeYw;^R$cpWZ<7
zZm)RKHJ+YfRgooQ6Y6a{JyJE-G2n3B^aVDh56Q3XQE9RLQTGLf6T#ASiOigbUKKUv
zwLxOGl_$#U)h8}R-@MOm4W+)H39iwPkll1&Qp|bPA7cQC8)%ffkw@jdsBpM)!fL6Z
zjye&Wjnb4CRY4oWi96%`jIUI{$5KtWSC#Xn&hQtttC#JsfwNp!%;n{}eQ~mzptWq$
z5W3}Unem<yQcnBCXHTuo7Qnr{S5J8t%n)kR%#^q&jrja6u}mj_@|JgO@AGW1!lMA|
z(lYm~k)Bgbc4}r-BCD-GS-$UP((~Gg*1%6udW9ePUZcdvtKVak?sO0IeEH)dO5%gH
zd57%>dspurnzvm0kb}u0unk_l^KX1t&~XJ0uB)s=vKxtwZfnC35sh6=##3e&@A(p1
zKE&z><iOo)KLnkhTVb~`0L{MJHWt(|c&DAGr0BW>QcM`S|DkGR;H2sK4h{2*eZvY3
z%pi?B2kU%>lI<_;p2_gZtG3&jIG}cO&v;?FYb~B4&r7aU^~)1*lfLnBo6gKPO<AkF
zcS4^*y~en$LgUt%(esb&<NPVwyrO%QjPvaztz?GXJdzC^S3d2=8Wkv{eOy_b@Xj^q
z+FGh^)sx0N{KZGY+?84f_-=#D&tBSU+8+4$z&nK=i;gdaYZ`^bqe^V#fuCMpQ6;ir
zupS?o<1Wc24-#_?^)3f>d(PiG*v2sYk^#on%uH(yvlFN8eto%1PSn3Dr8e@^jYcU^
z^;15?lv)+rrYlmnBXP=ydr!7Mz5%)rFeU^>kn*m37Io=7-sO-w=QBa+Q-SF~0y3Bg
zS&{tDAGb@q%JFumHw>nfb@4Wz)}TT%BF<UY%uFJRa3h_=r(8|fJnA@+(|%_?`O-@v
zwo-oK^UO?Frk+v@YHC_A#qAZdFsLWYes6#G4k2#M$G#~7?DR0(@ra0s#MRt<Pfjwq
z`zkf&njH95&J!ud&h<Jqo|Y9#r4>#fqO+M7RI^{zEOf9{Eyi6UjU}x*nDWJOAj#C)
zZ5jz30cVlR-K1Nt7Y%CSgBYnZZ$@&kz0d5;cv)VbGzkh5-X#+SI}EC$;SUV+K5l|l
z@qF9GKID8>jqga0a|?(hXLoFG>$rU`>&~_CA`h&v;9KD$*c=tyHZ2pfA^76$%UKBr
zuinKsnYLtj9upPl>iuA!WxWbNgox^vJ!{!I*_LAOY5h&~mfhYP`YI!dM>FzkRQec}
zyx79>;D%n;J_jkq*$Z|Jt~1t-kj*5s;pixPg-PQrl;X?;SB24O4aNQ)A<3Jyvd#@c
z5M^mF!D8COu7RY$kl+SLy#q#L)0*#Z^~{---^+k-Mt0$gm~O824;}CA#-gBg0l&U4
z@&~K$^ZhJex2|3MjpdT|7|e3-x&W5bGvBad4UFAC8e%rywpsrdD?h4#Da_ftkXz>0
z4}brc!aS5E{da8(!`BY(`ky`c;n2l-wG)ND(awr<St~BLtYtwDWvw5$M{91yh_~>a
zwqk<zAk>B$-&tH6;5pB}L=$P9M|LZ|ot3C^JU8vt+SO{^Cjk6^y+4(kt@g4RN%fl(
zsk$>g&z!lop~VPm;r+GeolT6-)9Io9$=k2{@2R}9v2gDxj!d?A={>CL?s3=a+qX|Q
zuDP|ahpV$>W7OP+t6o-G#Egv<CorL^^zNBjW;QlPF4+00*T~b5O7onVjVi?hR&HtG
z>D7JPGCx#kwn5X53{9r@!MC<aO>BH&afaDg8@yZnTeio<9tGXVJ670+kUqgfU%_!K
zS+DgoqSjgIUZ5GrzTK|es<Hmws$6ZB0mrbd%^|I#ejY1)`JX))^1I-(<x7l>5UBH^
zVRCGc8@8dkUYN1vg?@f>NFS;d-q}5`uTRzWZGFt%dq{E~i(9X9b8?k$jGtR)!NJ_V
z=<xX_y!z&p*Oi4Q#_}d+orBo#8JNk^%SrRRr)~Ur!&jc)#l@nmT)RT7@|x-2(ncvP
zkti+FMgjau-&vzHj~qU#ts$dtL~=BulNaQFLm8z*av;J%3v5is7j*u@A%$F`kdjwe
zw7)<h1p`6k734uElp;tOiCkijLZX(lNB!CTa@Hu=?|Gu2M{#5usHZJNOMe+<6mr>U
z=~grkCn8i!SDQ0nW1zf9n6<<_1%h+XIS$ptQHdNK=r4c(O^qoBb+z?yPEcI}Kzv1_
zd2s9*c~AicE?u%U1z?0VqB}V`5FI(RSTLx83xViDBHKuQSC@hwC)$vxG#3v^4FbiA
zD22g5wXqyFtz~0eHUPz?0epXmCLG|}B5^onIgDL2qBapvArO~STp3>}wJU&aIxsnR
z>0~AiS9;a*%*NfpyF)OxRRfNs+dJ$|ey9NZF@%wEwB2u`qC#kch0O&6XNm;dmDGF1
zlVO+Z+|9Z|>es2o9NYlrLiCL5wAC3gLHmY>UnMH<>Vs*S9~@ReM%G%kwb8B`6pI(8
ze7P&uA0;h4%Ze)*ZvU*LZ;L&2m-MD})4OJ7#cP^?=Fane@2YEe$N9hO?{92vM~CL7
z+nh%m>VDau1izthwr*zdpyq7Jl!hN2^D2Ch*tAJ-M=<;o`DT3XnX6vK1no-WCjo~J
zmA`VRPt%ta+&6h)<9R_N8Tg~)lJ`{~@^3b|N`F~)E?GK$e>CiAC{Ft7CCPq)0l}!w
zn8NEbHN>Zx+Ia&#Y30EmI?H*RznXmRs1_QOYD`V}Lrg;HR8C4wd6-ta!0bBMiZHG#
z)W2OdN=wsVa7+&*4>dRjvc@@3iBO8up9M}pK@Ygo4jR!oT)##df69&YKrlHNd}&UX
zu?OqZ9jT{bAP$w=aq}gO<<xFa?Irm#0yHfO9SAV_#dUEEXG5eykB|t|)5^b?TE5)>
zTmUEZj((>tMj(}uizf7lG#mj(!!5;;s=B)q4sTBc{#6J>ELjaan4Jd(kqByFEK(1q
z=cGlnB^~l~AsTt=8{<9g@hAdV9mAvQj&^r+as;e_+#MarRJ6Mq7{>{8G*IS<p<vL0
z3e8>(ys!d5C-jbiv?wk_kb)cxf=9?Jf)o_w;79}tE-woL_92h~9#~599NIZWkh~IF
zUIC3jfiXNF5J=U9V2wVmt@CGJz&ACpEsf@chC<!k+~nL4augREs5}aVg2LcXI2;0K
zK&T#M8qOU;riw2b`EKX?K0u<7K^(g{D+-;a1_pCF`te#El+&_~$W*z70m|Vij!>Wi
zDldnC{;&)*R0V|SV=fc|@HkBuj0WC?VuhoDw1G{4<lsPb0V&JL%fUdBSQ42)aidD9
za*QnL|Jl1Ll;hGe7Z=9QvHpwvcdonRoPJ>Rlj}eQ;5zJQ*8w3~%Y}#oX!(pO6bH;P
zqXm*aq#VJ)0c1*ap>n`N%E48kziKX_rpl?(qYy~e9@@alz`$Yh@(`E;1coq%!_Wvt
zG+aRjri_Nc7L6>^{KdwCBgFs3#xl)+8$Sa62YgO+7l(xaBjBOL#Vwx-Kq&t+gaka=
zn!~q9!{C4m0|}3#0hn>-SQWZdwQQt-5V)>55Wi3GV(2YQGr%PNv-JD?JCHal0PO%=
z0@c9o5CYK}M|YrsF+kMOh``g=@U}$20TO;OiX2EkTUnI;Y<$7FU;R)8e8VqB!!H&%
zL1;vD{#m-@9Y%uy{4SPr+2cggKY8)9kp(Y)>G9uO33_@zCi8FCf}`Wla|uMUo*r78
zf~Rw?@4DI;I-Nv7Bb9;8Pf-y8u_js*Aqp@nD~PhZ5(<KZ16dB7r~p(0$p5A7vN>O@
z(<M`BI5M92-LAEwf-<l{D?m^<I02$yZ7mN`Rzg@o6qRszgta^hfg>Wm+g;Z7A0vJd
zJz&cOwrc2)z4|ZnwitB(^5@ck|7F9=&HdNOax{Kh{tvF-LbP1rKe(2o@!Rr$aQzmd
z<qH47wH%G#mj8q6w-7B?_$Rn{mQH&_GH}Fm1I}`PLpr|fcFIDE4P>&MbX-y!%}MHE
z3NQp5hEQC{=Oth;2`Q)son}jM0d93HOaFiyJBvA_<o|b?kb-_cE=m4>$0f7x=Or^K
zDJXDc_-8kaISIAouh}qg?}Zl_E$4Bu?k+@YULF`o5%~D=0x2Sq2qcJ8!FeG8?sDMl
z&Ut~zOEMGy$}ciSdDLHJO0ZvKiZBEMIO%_H3*^SYjWriu9?m@^k|z<Q2)M@sWP~oX
SMepS00q^$iJz${2%kzI@f<D#&
literal 0
HcmV?d00001
diff --git a/china_devel_board/m25pxx.pdf b/china_devel_board/m25pxx.pdf
new file mode 100644
index 0000000000000000000000000000000000000000..1c587128bb63f09db5395b23c9b0c37ea485667c
GIT binary patch
literal 45125
zcma&NWk94c7A1<i)3`P+4HWLsxI^PEg}b}EySux)yVF?X?(Xh1{pi`5-I=%hW?%hD
zDqnJQlAN4daxeK0VNp6pdKNhH-M#5KI96f+v5met91jnJsF|gskv%bks3p+RNZ820
z#?T0kLE6aL#L<+Pk(q;u8IF$+&cV^%2xtZ8nt9;0maNqhcaXmH8tz${zL3P%3LaDZ
zt;xpRLfumCss8u(WJ$D(Zwe8K8p-^IABG<`wNFTyn#OS=JwG*!jRyNb!TdtM6QlIH
zJ-(k}<+KHG^Za=&Cv-3kDf?5RJ62@iR7GIU;m-fSgseKZlTo4j{+4oiJ=sxl!tsKJ
zJblIW_!6V))9u{TdUKFkGd`)C^XKt&?nt%mo+KoGgYj^{@&3k^n;?R}v#aM77ukyt
z+29ZJ1<{j>g&6;1c{cB(vE8NGsX^80j=|O8dh|}5>cjc_q{((+&%~G-T7}Go8im2W
z-EK`sh2{r>{!Wee%X<oYOScYD_U{|^-(sA_XL9_c{6}`}Q3uN*MflbZmy<1?t{=1&
zLp7p%$SzwwK*X2VgWqcbIS8pF6|^I!ET<`q!$bu+)Q(@LzHlwPuE>~ZcX~VQl^Aq*
zd+ZI=p}##KgLhYD?Oxdkas;2**jRh)*n0KQy`L64G3mg+JY-B}AhQ$S1lewFwOU{_
z3)WQi56E2qp58#Rn(PK#Uk<aQI6O=6Z(@Ih&~cVH!MiLr#)dHDRCI*6l<O;1jV#u<
zh)$LMv532A5@)Bmyx6(X3oy&yU9IDc3iusaN1&bZ%TwA(TvEGY<>+JBX{A&4^=`=L
z_mT?VYlfn7)cb)TU$FZq-BX=N6uulHoj0p;h888GbNKHa7cW4yF7ET`AzNHq%f;*U
zZ<$kGZ-W@5z8Kw{t@T6MiK3K`s4IMLo0!dY>8t{N=TV~ZhaEXn3nf>LuE$+Gq0K*d
z86RknSBOuGxUO|xH`gm>5k4;HG1305#rE^J#I}tekCaSI1anHWJBtKfh)VRf)J@Dr
zzxmD27Gyd<KGyh_yV&JRC4L>@-@E^|5SMTNINFIK>=_y@Iulw={&?U=*7d&07-%4Z
z>EV7qWcBg%>2W(do8or{$Pa5DuXhq*w%{ECcNGFBC0^9dcGw0DlCqfKFM)j<I}1BM
zKgrO6N<BlQh}9NCdvsdooB#ln=oAx5No&(|+&JVJX!w}X&<=K|E82{|Y+ft}aX!Mm
zZG}{%NAo4(*tM6}rKq70IF9M`cA`s>#(Jc6RGh{vP?G4MO?ybGUx}swh~^7Rex&Mn
za;bE0SxFu{xpX^0f*g0;Flf`!9$$nXYBA`12g@!oI3YOJ`-<Mqvky~SAsv<#$C>BI
z*?bswO{L8>&NVM1NuKCMe%vA1;5eEz0ZVg%*S;cw1hso%E$ff*M2G5Ey?rqo5hBZ^
zbJp~fRud=-Y~F<=a}IR*rZdy`OCnR8GnPPMBTEyz%^IWpHA#a!)f{Zup7^*^%nreJ
zB*bxoJk}z&HGq-KH;V2FmOk!C-O9ajm$BDN^kM=!zhW*=|FRsSg#HHsMDu-GnXG5e
zwCEHnYDX@}e&c-DRf8S05C%tE`7S8fp+m`3MY}iv5;I5Z>v4%d79~QnGnL7FvbY1Z
zVkAV~(>DUjuf!+>2%E5htxiZQYi()==!NJov6~iAG}*j;vz4tQ9FDA3W0Rrig9`$1
z3deWf{Usk@%X7mqj4OU9)tAAmtC!ipi$PONl&g1qBzB4f`W+h}0oeSp*Z%A{+&7Zi
zN4RExSA(`liOQ)q_hA6ea}8w~5PT~`LCET=T5}0433>I4nUn|NzL*IS3PE!$2!Jg5
zZRcP6D%%~R?<8z|(4~nOlTi^UNf)xoP6Y7Z&|#;t5-X&Rji{>-hc3g#o)xDuie|qL
zD2fQArBs3H08@7i(%XM-p-)#XTEGs(kNJv__f(DSQbH?00A?KatzNyAG}p5$rK)49
z$OEd{f{6>UW2tW)@CtCOmM^Mc777i6427~g5kk_>_pCvhRq@+7b`F8Rpt98H-HVJC
zK{<jw-C#0Gn$ih{YdX$V&nTM;>JY*c-H~2aWy>^M#>YUtSQG^$h>>y2zv90?SR-Zx
zGTzUe=}|Lz<VFlp-=nA;-=!k)484|g0ff4JZpJ$3F|XRWFY5<-HY~TdoLya(N@!Ab
z#msOMmU_S2-}XHyOZy&NPPSd5V1z>lg3hfgh4Y@ss_JwZ=9-JB3w;+`1A1c|SEo4)
zLG3|WIMXwZ;<8%8_H?`^LnPs{XW?KY_c>K(NTdrP9?uf>nI{{2(xaMr9l}AiI$G-G
zHk|-ef1N~6TDfDE*)gL!gbD1G0@vUl5ERiOp6Lydg@s3ZfbC{yh(?qhzmgPSQpU*#
zZ;>L)J3{-uuS(G!u!1p55y1HV0%Iy|L_F`{EAQ!dOuI5bN>wC2F3-MB{GEGey|se=
z*5g<$$_U~(38P#tDY?`F357FhPLQfbD%HAf$Pr+er@}tqLhB9NU_`CKn}zDUT4hLp
zJE!5_V~H5~AiF*SzKzGtpNz4&*1p>y*MSw;M1a}6QL4p%Wn1#_%KyhSRIaBHErj9E
z+z-cj@DDxr&W{7C*RAGxSdyz-l4cheipc#aqq&Da?QS0}Mp5%s*83js@=ZLtIt4P!
zE?W-*3t(k)C>;$Kp1MSwmG3&;?bKSAo3nl`Jzjous--k|Jc}UO6i-H5o>u&P23y*?
zecLw?F6=E`$V*$%aKmR$U9%w>KTjX_t5kCMdBaE**&9FhIO{v1qMw7v*_w4@QHyFs
zYteoOCj#9dj{$^_MZAjxHr;M-yMA2~%pM>1UUMM}59Do|@3K77T4b+nsaJ58{5ilr
zMfVz;@unnY2fg(NUF-Qp&<T1Ngxb{r?s8Lnh}y>FU33+9#hkPeNgMRJS9pyR*~169
zEg<jKYxr3+18B8wCd>m=PVdKj3I**Wzu#R2d+&=;m9^9~!<gm+uRjIVmzNow-;cIJ
zI$q{M93av4LHbY7b-b}PJ>Wukn3sGy0alS6g*qR<XeGZqcDu6xZ3^Njojd<fKNK8T
zKWJbzH$vo5C=PWCJ0Cy8@=7lGsIK2!pR8qAD|fKm?sQ~)2a@T1JK+@zBO@avT+->i
z(mB1Vz$@`~XWDsV&w%THO`5g=bkH8xd0d6PpG4fFh?zQ#=ONdc{yqe#CZZU`u?KN(
z-s5y@rBpd7=tc`3@Tc)Izo$TT=jT~3)%3*Kwev?(@_RmI{oo(dBKUxymTa)%N~<!M
zV?cP3v3dEB(DE~Ry%A*YS!j#>y)E`+6g-?;qkBAU^ToOmi66ZlJ_$hrt4MB>=SN@9
z*`QFQ&JXHA^mK=0-WiguI~NnA4i6g}$G3H_-IpLN8jt6wQ@2T%ZY-Sg?TaOUo$pyW
zqh<6@fBdy|yP(3-+>#<y>s&zDoZ7=OBi`1xs(mJbmP>yEFG7DH?CGS7hWQZkaekd&
zC_2Bqdc2QesH~srU4`Fhn6maK#Ku3{_#HyyX@uGbt^63!WxS340Glw-qi2)6M9l4$
zOaSlx=O@X{)6>?2deks#{ACB@@0*VcIw&q}AEQ)jhIYEwn};0->@dA+S9iHl*S$(P
zJLhH!A^`&9{37r_HgkTkA1_paZOe%E9T~FrKCs}(Ehip9tv;`p#qwx7=U)xQ@m7u<
z9UrRXj4oMt%_}#jHy<KU8UT0|RN<_OMyrTWZoK`?F14kHOd^x|AFq>Vs^11V<$%C$
znsfFVU9}sc&CMRo!>3r(o&~lrX6ipZD6Pv&5=%YG+5zFZ!0;I6=dj*3a*OSuvl^Yw
z-{#Ncp9hcnyENaX61;`oQ6pz1g1-#M<4?BTI`8ktLyJ|syNLDUw=N#c5H<C+HoB>x
zsI^@iCZX}?C!#;k$v#$@HYspWx*Xq}9<OGjMJ``sa`kFQSHA276VGM#m&$Y@J2K~6
z;<c#bThUgM6xBqF)wGKsI6ly5v-13D!Q%||arN?fo4|cBQyLX}>WF9Q=%b)DLGwNB
zfQV$$g)b=H<Qo=g$M&8mtafGGAx{kS;P0CO9n`vUxy1RhHgfH%v2V@^Z3J!G+8}5H
z!M{9ly`hyC)-r(q`g7IIi7C$g;Wy&7oc;A%_@l1+ZKX~C$o^Llpew3|H-|mFZci7{
z?o=Jj(pLAc)`d%bx#ukbF#pML%~Y$GOfR;#Af0FZH&=CZNBP%%%A~G2qKT9#Q9QvQ
z<%dp^=gUpeo0mV`xE77-&pn+-D8N4rcE4}FK#?HD^AC&Yb}`Z-Q${t{($fpN_yAsh
zFYZ4Lodx7b`+TgC{mwShRfAQ`8mI{t?%CdBtkcg)?WjQa@==U#V#2XMPK&K+!HaER
zydL3cG9T^@F|uh-kMoXpuDct2I2}iK=H<)-<>C0v``Apf=q*Bz!g4sN>V6l(os_4`
zA?M%YQxv`#6+(<Gha!6M1^WCVH7wjs-9NbQYu4*{O{Cuz%4^>)Y}QFMnBoCch`M)o
z?Zq;di_Z}sX%}D;>uvIFvDOL~4$Qn_%x2RT8Wk7bWW28CYHPEnyI>lG*+<he=heYx
z?y1g8%2T(K@MA#dbbfZm&CRB!bK~;JdD3Bu2%sp(NuTjMgBQ4%^cH>@;d5Qm^AYku
z(LQ^0X&{nX($hhWx2%7WFvO$C7AW*|keM`IVUNnyLaSP}&f@5B$I|^&w#BpY%f7=<
zDpIvyQ026yw|M>I*6vizvwqi1+f!B%7G{hTSh(gTO%6;zLt|>r9-gy~sLyT(gFP6x
z;<>PTzL@*4pS&A)Iv;us=WP|!B#a?4bN||r@ik@=%P0G%zDy23VIjHk3<nkiFT%Qz
z_kP|U$!=W8#z903?>%d-Pz=w6wC6Ifl8L9~_1rY~-T6z}D%5%Jd^e4jV3J4G@3|Vj
zw|?PWe)Fd^e)h>1$7cy`y0<^alrm)qq>Y6a&voBp*ImRa80_u_0;t)_-@ABU@->Q@
zC5SXcRnaP?h;|pDA22;c*qX04?zaczx_LN0o(?FxEP5{ZKb%3P=XOSfwx=$SLiqnU
zae1;{Jw8cvWz^2Eo#UU<!fYKuEn_^FT0X8MnV-u92Ga>9UJzP@g@i<#Wu3SUXNFQ+
zQKP@5&Mi7(zXe$=+qvlXktx*9$3}Mt4$KB`vl8@YPEiRBy7xUm9z<&Z7w6#`e(gqA
zGx%X)>o*lOj|)779^sllfi2GCcIGbvN|=AL&Fe$ENmT(==5dXSgVsiY;Lt>i^UfYW
zmO3wN*MHEu%2fUB);#areO`)T{P_-^ZWT2fSO{-fc9Ggz+&nOst`VR*k9+7Sic=cp
zRgBm)QAEf!?8MGcvl$VZaa4q$XXuZhv1pq>hA?qFT?)K+X#`$x2#!dvW!ED%v4PQ=
zA2F)0q8aCj>~;1wkW~T_liHvXirNtSEX+q*uc+4)Xisz$x%a)yq*Bu`=ki#!nmY;H
zIn1%$xmE$LA{Uj49-pg7KTwnBUW+fH17d3E<t)xmVOj=BSZpHUakPAWzBCsZ1*mz<
ziqj|1s!<7zE!GZPQlfnQd0EtL8WUPPB#@!o7nbOxp_)qVqH%;<dys+bfPRx|e*iD|
z9l3a>_$vw?1Wa&A{vc^@DiJh7lc@L4NDkB;b8VfpSVxp(8dbn*q7kuZCWjSD)bL=r
z<<C7_E8J4+*lz=+L}Z?w^?(#sYgeBTvNowX>l8h#*Ynj820#!bdKp7dzEP?|>X04D
zaFC$1DIP-cmKI_|^^xO4yeJ}Sx%}Lo(~|PW-F$by<(a_7hHKj}5`<c?jsV?8KRF8%
zVA<`4tlB^izTMQ(P0B+0A|hM~p`jW&O1QFuYd};+uCk+M(>&#l)mSs;v{^wER3+*6
zG#!%(B?A@(*M5!b%E)l{Wa=OfQLk4V63Ppl+6d_)vmVTkec@VqKeE&!f6xlpE=Isg
z(13zaNo`F|3LC_h_M~tm82m!H-dY6rqj#AwuZO6r{dtcN3|z4S*TsfYNK9m4LF)sx
z3FVd6&klx@b_P!QK1_al=dYwHL>S`)qqU?C9kY(=2#CQmcH6g%&EKVOE<rdDuqo!K
z@sMpNcSSCTdr^g)q(_qT{lWnDTo7{;juV5`k3&-VS$5kJ8H~O=awygQBjvqmbwZ&6
z*bp1A+zU9FV1lE`;P`Xcb>Z2s)m7#!jEJbI);tL41v(1egaGRBSSDp>3U1bn04I9*
zV0G1_Ush~dW7T8q1p`&f>~ledqLlr-8Q-LBl;nu3i(*PJY@-1R3CnkdG_{5pE77ws
z4*Gy1RM=wN{b3&Z2|A4R^4h(Eg(lO{Z7o27WhDltBWo%GIi3$CJTy-Fd~S>c6N^#*
zs3_#RYQKM)w^+3iETSlg?c|W&O;_r?Ulf|J%DAX~2g(CR93cEUNrL>A?5m{2H0y?d
zF$Ma?w*iovq<jJhj{xYcb`%+0_;+6IFBMVyuyt6IUB}t*Pde`{r*+E2H#Sv<@#|H%
zmyP%FxK|inHZY6DyO;hG=Rx2KENiqJnuJ})f+;LbdgXG%<s8NCVq+(-N(TkfP)DAz
z>*1*690`Vopy-OUQiYXRk_oyPlpdS6(oK@Y%5$a7pyv0Lu^SWs*!%rLepw(@W=5c0
zalC^4w6#<T`IkOr1MB?Khc^CbQ3n(XV>6kYyM#>|MdrwHrXS>W41A?4EM+!%aH7s7
zt-!=!H8tW9j=8#8n>=`lffXtuSp(|=hB#7?VN`nDI82cug$c%LdKhqnemkV$ZF(wS
zAp(^o24XyAe_vAO66P7#_19ct$IRey;n9P<f+;S5Ri$ngVr9iHuA$hYgX`)>04rqD
zsFF?YGU2+bRtSuYH)+eLBSWwm)9j|?7v|lzWghuTq)9#liZN-9C24e6)qt~Ka)Yyd
z#tz>ZU=~!aE!kE=58M83tnBO4&pH*NI-4r}__Z#y%OuB|VQyZ2c5n+JJ8NlKkD2B4
z?Cw$1)M7gdqx_S;dI*JnCzpmGN$Q|fQ;V#1RXpFg4FnFAzBEc%U)UdndiF-JaD3bO
zt+3G~uv3x#EQG|M#j-2<4AE>#*u4oDxjHIPj3DgB6yO1|5R8q_%CF&f@SG^aVJN*E
z<$3J*{!AQl0s&%76u?*?>#xK$ExoqD+(r%&;0$wSJqUjJ10Bx9=jXFc)Sa$WRISVt
zwPp6>{#;kbv_vdT>)p&KK%B)uY8Av`7m@){;Prl0wE4TaK*c!Qa|)wrtpu*|<hCM*
ztW5lms<9?R9&5K>XqAEwUF0StgN*uABWW;3(rL@GwE!a7_gtramN;mH*QX?LY(EyF
z3_v_*O67Ov>ZP03bcmN-RePy0Go#@jhUrP-L4Z!2pH5U1C@W-~Gx<uAEWjzsB$IOE
zVmnq1R-~}U%Xn$41KHFr!%K1(hBfXT{-vm<$51Z|#5t66C)=8WBaP0byDkDX&2R?`
zdoJ|oteY@>T3OXZ=`q*|0jwHfXFb#S)A=#T^Ncd0MFIlngg&?g$FX5`glO2q7$j9i
z@j(pAX;QYnXc3$R5y*Nlb@T~`3`V7zVl*Q-xJd|J2B%WZ(tahy(Y$>b2I5h{vTa6g
zCUhP5k$E;;t9f9ibHbvl#@EC!YCH=41<1F3aPEX>*}Udj2Yg>9!Q6x?%=!ZgYnClz
zNz4zrL?`g=s9Qs!UlY4P1V+n*;m|uBXs=&;<>IRQepL1)teE29#h{Ui9BE2jeg!6d
zkMD-p&G|QkXLEQ3@z78PWI~K-@#f_r2r@&KIl`v#`vDk@o@$O}eUQNiro~P1Ks9g)
z^)59_Fm`MxoN2tgi`%{T$h>#yp<)o`t+7CNTqlSM<p!AB!h}gC**<|BcAf!hD#{&O
zp@9|>r=}F{42fp{wv;u8vCZ)h9rndlQlx5DY5fkxzN+Btv+K6xtE%2r+03>0xirIb
z>6j@C`;SnqO1Z9b7PTRxk-#yf_xp3Vdg?DTi;l7LDh`<SV|G6k*rZK-4XUBA`mwL{
zN(7)+XyU%8rCG{bV)qIRWQKoFxnC|srd$Z5(y7FO(@9rT?b7fiB|fxw(nakcwAw{L
z;uRK2ro=Z*VD!)9tg}%{FMq*CZ&GQ6Q3H8w-p$Hq))9_ds8@@F!tW1u3#go+g9>Me
zSq4j3J%+=*AX%*M^RtaAFMyzils$k07wQMHam>7)XjOkJ4{Z9$*-M5+R;fAT8gp_2
zxiP9FP9da7sF5CNG3n9ZwX4W#Qu~XEEPJQ;;{XV6$E9_stbl3k@lBN5!!lc8Ki`F}
z6=vznfUvr$4S71wwU%WvHpz^Z`XuR&8mn3#?4aKU>l#>!Z)T-AfV3l}ylQ_%x;}2Q
z>s$xrGVA)v$)JjNcT;141<ZqB{p`36)8@g`2D&+UcRf9G%Fw{X)0Shg7=?2}*-qR(
zyv7ANjx_i#71}plfcC89SFm2SAb`>M+ZXIEfHLiO(x@l|@Cx~JtH$6GsF0>9?0W@S
z(}Om_UWDV_`9|8}T7;KXPV;gLe0heOD1p83LE@w(o;BA9Ups2Jxi4s$aMMKKd+E&5
z#gq{X6-w>GGb`oo!zjetWw;Er&?C;AJuaJt#*US4C9_%>5vFu58Ix%m8Q@5l0DU(Q
z)MOGKk&3UBKs`YatN>COBI{V}W~GSNOU@C-E=~(aa<r?@pV`w%91dih?FrgXWLy=f
zXbV)`O8g@A$<7TJ8`7Xg(oep&kl4Wv0vdPS5aXY}@=hHzb&`ngA?_HaMFl34@wBD$
zgc$e7T4J;KE!(Gq&PsC>b{gZ($Aiy^kVd_@QOa3_HNYBD#(9MCrkqsGUp47hu<s5@
zHVuAMU1pUXwq0H}d6c}<?g1vmv<!_HzGxZ*fLG7p^9@6GjF`MCbXkeJqc1^$Ue!k0
zsv-y@5m&0$X84EMII*FnL55$Xag1Ui9TnZU9;+eJ>}ayaJD4*=*-FmdZbL#x=tuo_
z5N;3r-dY_nH6geg+(Ewl9Xs8QRV?CXN8U0=Q;l|H9XGfB?*ywP>DAag5t?%;s{8`X
zvkVRD@P+MIp#^wIMe<bnwOoTqo;3}-;_9e3{av4^89>^*NoN9Jcp$@mSF0T?doz=+
z@LDt(25RpEu6L||6z1K`g93xPHAQ_RbjX9PsZ*c4R%sLY#V%epXp{=D;#f%G{9Om-
zv2&<Fqwy)ui>VmHMzlq8u)YONSu1AczIkOkMNLHz-i^BW#9Pg1=Eq6zu`CK)6OnRj
zW!^v-30x%Nx)Reu<eD-3TyBawo{%Db!)=;)RiSKXm)d3FqgLgUe~)Tp(`l%i#Y6nB
zOAOnR91qCNisv?1wUy8=RL-ohp{ZRmC~{5@Ln{*zt#%5w1ukc3PMs(|l5KrkZgDLu
zqQca7(KTCPCB#}mcXXQ_P#!jJ$F&eD6<8kB$?icM@a1L=RQbYm#zXeH)K(>{Ggk4+
zvXy1C2Yn4T*K;l6J*7TZ2=qufy5&s~fV5Ndfh9NDW-}0APEyFq3SW}p72)qd$o<&Y
zj5icvDvIDZF`+pVv?f(AuQNPlf$Ig^3~ou@N`%=qH(Y&GS5cX@7={_xF#)b(JwR+v
zGwE!km4wj7Qi4&rzsoC1X|I{KSk5NpWadp(GA38nC!MXT6PC7cJk+?{i8BcV8>p@K
zyewe<;YO1nv96~<)PBy+R8iIImp6!wIFz=-MlupzJ{QS6O*o~`7WF|SVrq|9&3PE3
zz_XvCi&9>-4cmY<8MU7s@tAggrEE~e^QjGepW1-2UU8g;WTWh90n$vdyB?W2wXa{t
zHHsl7>qlNU#KVT)U?m12o2xcttf|NnDdpD+j*1V-crDA=4%K0vTHI72PCc+d+ey&G
z%zN@$5lbs`Rx~_y>{j-G$FsD)u{kO{)(}q5%4RnU<HRadRUy9+)Q<({9O$o1hXA2Q
zSWFuYa2Xf@%b)1jNyXoJoFd1yc~dvXu3fD?Sp<xoDj~M|lvS>xSW2lWFiL)NtO&N^
zzl^jhz<jt^Nl**BF)nQ+vsQx{Xf+MfGUl5aUr^)gI?b}Z5YgxL(wWe~OS52tw(Y4`
zDYG9v{%vx>mLUeaaE3kdPFNC|Vp+$&98e0*u@d#NQ3hiDJHE&vumni7{bO5yafOQu
zLe)W4f*oHHnRJdZGl(k`#RXbO9s}m`VAK#VBX@`E;QLXKEbTlmDV-9_m*uU<wV%U{
z?0v8kt#@Y2yjm8J2)79nZ2ED_j82cT1?hHd5qr(Tz3T#?{0|(+2^R=`*I=3I*f02W
z;{(*r!Pf2`pnW9b5`<*Lxga_+Dt<TB@hJ&2kp`lqxIemDr%N%{Ia||4QJijr<ATL-
z90q){Ycr>kFn1g&Ft5@yTfTWbztmT1mIhbtYaJ!VO3VO{$G!u|5JiB|F!(-ATxA%6
zz98J=ivxTu?J8DA2zQCh0aAet4?L04rNa1}b_8*SRI}P-St5)}I1Ghk1G>K8pyU#`
zxF*+$2l0Ut2Aakt$zNm6kNve2@>8&i_O)K#6^vCzke9kND2e&BOd(6^q<gDUzUUJe
z`sV!Hd|DY`N>ofXN|^SI#i!H735y^%lh%&c9mlV->_EBJuOl4rJ>4D{jhYCnPB)V3
zuN#wuCzigEal|<YB4hSyDDeldK;XM+%bIOBddYBRw5BK+oL(Tx6Si6uskA|Y7g-cs
zA<WHukLHopqL(D)qE2fkhmB!Q`AJC0-=QTCxIjiEvzx{NI%=VEBt&4dPXPr~RP`oI
zCiwEI@8nw7Xy~>{y^LTQt*Lh|jUImtcdZu(t~>eU>|QW6K0dKhIMcv;VYJsJ6~wwm
z=zVE<hD{wi_ko_AA(Nys9tbb#au5blMc<{~hgOBr1yD!R`#}{1jcIw2<p_p_6CYTi
zH?Es5Rk%_QwRta<MQt#-3X@{K4mkQ+oK~QNT>=&qTo|K`k~X=GKLVB{0FXAg%opwI
zq@q7cPqj33+&VuoQ?8l7_5YQfAA!+*+Z)FS6R8*!G)%CkRB$_+HXYz6Opj!bYzA0e
zP7quz6it7rTHV+!rEy~XDIVQaO|GrKS!Y&6<r|P@q7Wf{a9&%CbB-|zw-|RG8VXsJ
zdthZB21{FND0Zj-{7zS^9(6bx33+D3k|Q_AV=U5@_)~m-f~HSgw7B}mbi7`7POA=@
z1?o0gnyd*7S-N;)Jt?-#??*Flp-B5Vj-efyv1>?hUwKGdO~wLD`Dh`jJ!~-a0}g5<
zT!&D=cIuaxQXK>3U2#s6z(#3=^2{mW-7XUtl~1~IHhiN7g+liw82qk~ZBA!xO4DE>
zU(?WlGT;-M9)iOSX=Jc!wTN*Ud1EWWn1Bb#-lwP&tsBZaknb#w5mD5^F@gqrWO|O`
z6F{_nZ4Z?mr3S+k#6jJM%EBQ-O5QzV41Ktz{i`q~h3r7<}gRNTAXB&|>}fhv9V
z#wfL1vv5wa-8ax9ZAR%J^*Nap0qoJ-f+UQ#??$^Am*q_hWNXmgu7eRQp{Wxvl)T8d
zc79=OJFRxzNqKpd5K#S&ceY<xX=gSuzi>t=y>Cz4In(szQV(P7Q1ajSTSb?HjkX?k
zaApjy9$Pd^OvG%C#7~M-47hTIgn9GcHOXkCFXe$A8VPRPa+J(i%H*1Lr$>^2OG!LU
zuH2uF;1n4vIydyH9SDZ;WSp~zGYy$?UH+J0DD^gcWQLAWjGqG26Z-;S=8J77WVK$2
z!U>(3+-*H^<VuKnQfs2yBlLcZq@Aelv)n%1`=*mbv6fiXS)A!^kOePs_)BIXy^JaN
zkZ(6IVuG{*2}Csl=1UzZH=Qq?ohiM%G5XqgsNdA)cY0#%^TA9sR*34!l7o1tD3iwv
zLpCemqMIRmaY4NFTSEe?^j)t_)9C@ZALo)NKb_I~ui;NU;Bq=>oKxXZEF^OE&T3mj
zF%7!3&EFWNzaj2Y&35mDQpa5Xl8`wsu%4#YWZSn6#SxPy14YT(q6P&x><)Ut|E;zp
zD^SIxi|?{YObyCTPx6)e3?ls0l;V^F`V#z!!wlI@5@M-A26yZm7QxPi@ncPN_Ms`^
z_Az&h@G+D9iSKx01clK4fr!l-(tN8lM~Xgf2`yePJBh6wsz4PPlgcaz-FYa40qs@A
ziDm;^+7N8tbU6vd4LbFeZ=0ll_hd-vJC6i;@^+lxF7`YGk4RL#QO52qID^D>`o2qj
zAIt^mQFXJY$8*}96_eP~3{*z?s+8TtMibm#{^6T(AnVN70rhdb4GdSlG|@nePKet|
z1MxC9U3R!^RSep8439`++MvKm9WxQ;IL)5uH)A+xF#{T71XfY%Rm%dna6g^0lGd5c
zl|<u#Zq>3Btf2#G^pSQVk;-i3rOtW_`3yI5z{`mrwlo@cN&Y1Fx+`AO9yrnBUa!mI
zcjG=DBNhC)_8(?0Ba_!g_27K~JXIUp83%Y1kc4#3y-aO2(M_j-qqBr&EiNr8+pvxl
zmOw7Ch>A>q3QJ*Ik{;>;V1?Snb^;qILS>a*j+K%2a~=9wd6|K1!QF)Ev{5$(g?S71
zYj7>K9{jm+G#lHmhfWC!(iHG;0x`_oNPVE+0gIlEourjZZJ-K=t-}J9qHrHm>raAg
zY315mzt1mOql{ZZq8ZSL0REW^#F26VVO`L}LLd^C;1!)yZiN3FLJxZMQzqp`{l$*S
zRI^@nwFy+L8Ff|s(E)g~!Mf7);1pyLRi3(Qqba4y+Vr<YSyZsLYKSHy8r(@P6aJrU
zb;fFoxzcFgbQUtTmdYz2dqXTIo&r)7>ztGpt^uTQqOry7>B=(_YF+XHZ2Ip!`<hnn
zZt_Y~O#m|`>^NNamz{Q16~r7+v-KR2WB8~q<e7U=QWxHPKe>lj95<l>F3o^wars`z
zB%O|BV_mo_?K~VZF+Ek5z-}C^gAaAnff$+NFy2q0md1N>24NoIHK;-`3qV($K$3*7
z<^0NgtkesQh@U*`d&E(T@1!fje$>F?Zr+~ye(aH&o+fF6%|5msoI52gOOB>s$iru*
zBE1rhBlm*BgEUnmWo8x_OV?{USJ}+#D^YCLK0A7r2>!xa7H)|?E$nTq`OVFnT+E3q
zBNaDCj3G5c`?*(r21T>_TaP*g<1d`JEUnIwTr2g*Yi8p#SzmjkUt^4>CHKQ=<8f{x
zAgo2@d(vKl6$wrH6myv)6BvYJ#U5!+3IS5ob^bRdj_Wbj!VYV}BBNhi>4q<|^gD25
zD<uy3m(x=w>YugI(k5E`5hq9#RZ1c~B=uOnJ@ic)bSoF7U>O}~L0auhi!A^6iM-^M
zTpKvoy@~cr5EH=D5&HIB2PUJw%S@9=RY#5_eoeYwe%&}cK)w?@xhOpg@sa|uV+=B+
zD-{9X@rtKOuH>?RaGD)-VDb;(h8|0j$mVdkZjY>jjx>^C+71I1dzV;?EK)spzuepb
zDW-x=u~8xhEJ2!yUlL)N1c1WXt0wWw(4#^ijXa9z9xO5ws9`A_6hJ3H6_RL8291cW
zEynH^{3SU*%t6L1ljW=rFq8%@U1XMQI&<DUG;BvqP>c>^=mGBzoeU#VTT(Hb=seCb
z<2u09q>pVFn9G`0Z98a^Wkyg>9FKVRD^r<R2ASs(F?CLPCIt2?bCY=><psjdDzF-z
zl(Ks+O^e4mz(vdB+0CJfCZb39k|e`>)>%w@{wqdu{g+1sGvvm#NPALOvtqs|(e$(v
z3Q<5K-!z8RqrTm_`0pREmHSbs33Sb6-M$r;Ob#BuZfGu#SX{^6L;-x8tqi|_F3ar9
zR7q>(XkeR%1M8W#@@YCcXi4yr$KNJ&#mvtWPP<(z?Dv!ApZgz*u6nGx&8$;MeO{nD
zZab&*eA2G=J}lb|IrWFtwCmrG&Hzyz?a0VAvLQql`iH8m)Vx|g55HR;Awyt~6m1hc
zY$m34WmdFqEvt?!Hm`XuwRCZ(IsSy(@a~=YtaS{tciEb8@nByNpDd_~?mV%h^D}mJ
zuj90I6M7D0ZQ~d}+h()|;-n}W;1TJ<AA~%dx2UZZ&E6$+kk>qqk3XsCI+s3kfs!D2
z$+it`$VP9KbvyUEkf_XQtH%A3NIRCJjzqJ4VeaWjKYB=|9FBe?uAB*4V&90eUsYw+
zpMLf&8d-tavNS<#k<L@9#Sj1a2KOVbA#`G}w%P`+C2Q&w=L8x?$c?a*z)V@3>xP57
zz=HUj9mEw-Xt7x^tZZV0J8Pj}etuXlcO;1>Ib-!01Z8g5bNJ`oS>eLe1Wfea=$C$p
z&KxgXlNH=C+IKS6^hKz^BfmpqY{MUUxZJ@b_|5u=)QCvU(|eCt+$e1n7-^j*DIDfb
z8e;~9fB1Nqa<ga&&`rDT_WYK-+^F`4%k8zNvG;nTn^A*0IPya!KnnIIB55QM&P{Ks
z(-{ZFlka(|*n^)vzZ)c*CbCqQ^m95*lPZ$JTWL?XQheEZ!zdAH&itzHe@k4)yE{V8
zFzWto*RjdN50{;Tm!anuV`=})xHkHtU_5nqJe(oA6x8tZu6Xqk=un(DF4cM3*W@{z
zs+d;@TA$@hTc=2@{-4C&rLvM#Ypq1pkf{lyliJI!UNG$*6B~2z2F7a2Os(vy2CIHM
zgEB>KN|79KAw<A8dlMNeGq<v+_D!(rCx-Ul$DQf$GCMQ`VhL)8RV_}ua@BZ58kcwJ
zBQ3M!*Lh6*Gjjvpg{R1L6tNx~6?*kY^{j`>wHt8*nnQ4mZ2LMTYT{ZreLjUp9<GbP
z&Y(aBJy#dzrw8|tZ<R$dP<@*!meJ6#JhRjB&E!0h@cz*fHhN8=o2=}DPlOaS)2dt`
zLR|UuqEHhm1ye*M%Q+A0Czw!{W5S+Ipj(NLcgcv`y?TV*@N`HEs2^8^xO(hSrN7fd
zNMC!7EcS7P7PyPaWDThd&K@Y0wO#Yr+EE5z`gbI;kZq=e!Bt&h5+<OdcoZ+{bmuC?
zeMLlAl!wD}ypZu1`mxn_<)wSWM@f57_Es7x&z-U;0CClg`hLDym=E;INVd(#$(Miu
z-)IVEo2SCw)&8v^Ne+!jh%tQZ?eb2GK)77UWy0p~Ad$!o`SrUX5_`NVAVCrl+a67t
zx6KHik!2bduH!B7Bj?nxGtq*4b=K>8(&@M2BKu>gaux>dRt|J3Fm+KP#(CzHZX{Yf
zs`?Z%l4_Uz`v$R1t#ppvwuA*}$r28vPjKTK#i%1+{O4%&*cO+>pCHyDLW(+}99d4V
zn@3V_^#Q%6%xA|$ye`phc?xAnmgla)>9kUYhyZH=kmYn&gO`}TJ1rt74b3R-58mOq
z(M0Bj$|sV&y>FyxKKdI$CJ*23o8EftAmKSuhFQnH-dytQr7MWtgsG>5&2-gJp>yzU
zJPzJq(qHYh?v)~3VjyQ5gg+4Iou`5|n`(~o1ce9~IU?Fd;5w)+#HM9}xz7GBp#t?7
zwo-0NcT=u5A>;mx+~jPLCk3vHAEfcmRz_1z(#b={=8emX6$}01&C2eWg=_pW<+3?t
zl{uCAjBS9&PNwEiFEKSH7%AW>IZ3NK>%a+v6B7?#_+zy6#q9|S2mid=S+P|~?`J++
z*fS~-S!*MwUw_1KE@FmogDPEKr5t`CMbz%tc;O3AG9~p`DD^qfgecjtNZSs$RHoCl
zic{k^DfIe_Y)=2$({-;qb;V@QF8G9T@561C`h+@3;J#ODWmyf^K`SxZg<EF`Gtgj!
z)Wv~SRi(kY$V`-ek(qsEU1CgfLbREk!V7(DYV?KxCy+&5Qh1zgzxj>+1DYQfv9NqL
zNBPlThFR877Qc=y<J}>|h!&ISMZ7iX$?)h*uhT3!OB+~9N4WB<lmj7|5yUNuPi1$~
zlYGO+Z=uO7XYXE#GtTYM=L}JuT8GtuK}oU5GLCqTZkVO(8{LHoN+bXZJAGr>u>Tm8
zSve?LBROtQrXjUCd~otowGGg8Q9@@OyF5tKqoGN*l1T^OCYJQeGKSg6R|5}^Vny1^
zo=s6MAOENxd%q@*7v9a1ZWMdT4khEtFpZ*yO)(K2jJ&|-dyeaF8u@}ifz8X%J(Yj3
zIF9nzyZH!RUPnattO}E12R?&O(8*$X{xrUp!`w?XTMCQkXk<;FN(kwZ<MbH@sJps(
zM;Y$dQkp!=Ok8k9a}a}!1lxp0nOkMQ8{;;XAqWk_Tj(%M0@;Lb?D{dj4l|wvKTR7c
z6xj`B_rT4JWzdE3b+v8lTN3Pj=%p*)B+#*gsp}1eQ^)2r@hZ1-qS)%KKpe^o8u)pF
z^c&wSvjx9gl#RCZO3<Hn?PFu(d5zN@aBHxBz5ISvAnD^a%dy>QK&Ex%%dg*%-SOr=
zfPoHmAwe9MsFQL#IIZ1OWh$<*9p@4`_#}{kSzH%COy`kjtB7s0P>7tS4+Sm#p#<d#
zBKy-HvAt(XQxJNG25SaBQXmnFU_ul$yl!ujO#^`B1k4B9l&Du3gQtjSJI0S%G<$x2
zm9&UZ5HAjYcxjhow8u!yb>%C%I<nBqjIxw9kWKkQ(~v?K%s$;PHrdy~k})7OCcy`f
zlmRYFx5~mmL}^s@;{u;~Gxy?g4~n>(6rq!;UjR2e<NX+GY$tjE>&|{E-A!Q1EO1}e
zWxPMgVc-7pGC!d;E}|qv(s?JWWCYrICcXhMa)9l2P&gkYk2Q8P^ov}&doaZfR5-my
zWYpEZ<HLUoWdRztr<Q~DJ~r<1Aq2)QYVkE<I%n(pEU%{rSc$KT$J>6^FpWg<Y*MG3
z+RwrJ7?nCs^nJGk*qno{<)sa{Tg+T`?0S3aq38H%oE_u3-C}VHS1_LQB11m_@n#Mj
zY-#gc=~bgztC}Aa?$Gm|M{%mUSpOS;GNbV0De(l}6+EN?S<^g7U6FP|aNJNAgfTU5
z0<j6kWwH6k_}j~8u!*Nj6N-N69F7^DJ*x6%yhSQTTd;a)7?*6jzYq<c{m7A|D59T9
z=V!=4O{zue9F7s5xs<^-FOh#nsz4GUYBIMd5vpm+YnIcWWm}X=YNf5A{4=QKUY--8
zZB9#)k|mbAqjQ8A&yIQk9mg%t2(g8wJMU}cYr}kQ^51BNs$<hTq{-y}8HbX##xx-v
z5p@TKETLvl&H&%URxX9-uR1@q*Ii;MRaNLAa}oRWj~J6eVT)EvH;ZtNB|Ti`7T|UG
zs(Q&|qE#vDTwT618-<i+|F=frY$2U(VE<xj=V4V^LDAoUmXN+x#o`)xC@=M)$cAdw
z{!0_x%wN}c)n<ipo~;nwR7*!w@Z_SjSJZJ%$VkniNr1-wNQ;bk`{@kpqXjxp-+<0r
z44%t%T<mG3u_CDHxhyHXZ0<c5sS2ZRKBr;5tV#wlASH~gWP3($A{X_I*R6dcqC@-a
z(7l@*B)fk|(J*NFSVx5)KqnJZc-HQhJW=<tDSLT?NWg-fWC+SGK^bAq1aAwC%e&9d
z7No9f(7_V)CdUj$xRI<)+5jV+2<tP>819=q*$N*^(uV$vQ%>H+t|!*g<B=0D=WSj@
zoztX^^w+qkZ=yD;(;*&Co5Yq6&3*9A&o@vEk2KeUt1(uF*{;qHJb9`ni2B{@Y_5Dn
z-6efeUHNZ0{LOJjw_6K$J388?0A?|BZ7;$nRKC2v6xF@>KKVKHv%@R^FkofT!P(=W
z8dXaLb)X$p7G{SO&n?oRRgJ$W#>#efXxCz*IeQ~%&m>AZ*}9E|NxgkdjP+K$X4{CQ
z_|*=PzWW5Xq1vRd-8B$sd%&7}dZiw3*8$B8fwqW0ItYBzl-Wt|5DSaP-gK1<E1!t@
z{J*=??LiRM(3RLffOnEFV3H34t~_vviiqJxT-Ip!gClk4yrR(`-KD7!I%qGSWXcAh
zzip;EuHtwo21>;Hx{TQ>X1BU@+sekXi7N=cws<I<iQMd5#t#|S5Mu?p<+0hAtHHOP
z)3AtQxzcP5_MEs#{}^K8%ij#Cb=hF%*Tj>@|F(!7xixP^^Yr=bA%yyvXbmi3V~MUb
z8Tsj`lXd;7u8fO0|0!`;#~d2^O`-hI?14l!*z^sqq0ETA=}NP=d9?j{HJ_&~XykeS
ze#SS(d~$_x62n+=+<JGT#WzEKF=&bHevFQX>uh(b^4_j0%FQG|eWCsh`y~}U)^qk7
zj(|hlw@zns6uYAB<N4pcmC|?3*^J;!qCi&Oy34c=R%7kyp_PZ-kx>tJGwX=R^u96c
z!t6xjAbi0NkodJsD1%B~la?akUovhEh~O&lE~@awHOUe5x+;hQTM?;iFclrxB12SP
zaYx?H2-jD#Ldt>nrz;fQ1hE7jqpfAf+i@>xjGS0CZJb|EC~xha#KL+G_!4+W*0gW%
z`Q(yb_;`{JygaH;Q<l6I_9|q5_7HJ#YO8wl0Q9_`*LJ3TE_}LA|M+}h{^{gyE&KCA
z>0R*auA|})vSc9sF`SXL;XgCMK5KvT$JqawN2bXj1hiBT6D0mjD3bv?+MBr&YXaz5
znAzEg0rX6apXp}w07gdU&w`nQgXObeXJq31+sFa<G(peE!t}Qhz|O?@_Zbr_r#2je
zs;QZy(GMFlYsbH~IN4a3iT^(3U}9nad@2UCvH}uoGSM?K0XT{OqtO1$SkwNC^)Et>
z{{zDRmt|G}>!)SLPcVO{{WtiG|3JmW$n<v=07lM#;Aj2En%EgxnLZmC89Dz^aD1Bh
z2mZhBI6n>kJ3^+<*C)b%EB*uF=RW)^7f;E})`*xv#MMzu(eX1I4~{`mfY{OA>9eAw
zK+GUvXk_hZ=IHj>Ec16ZroWka|6C>`;J;fj23k7&|1tBq!~Y3J)W+HojzJLUVDz^}
z%ph)L>1^a^W&r#|;iT{Q55Rw6Gr}>5SbruDnpv9=GpL$b3s^gt{j1^MaenUMzb5!^
znTJe_Y=1}nlWpQ*N<ZqN`vC|WcNm16jD>Xi6*OOE#R)Ev<Xd^ktQpXpNZ1KppU8@A
z^{*4&&r6;x+iLhN>OuG8vaA8$Eye&y)`n5GLsMw`kk}Oivy-JB2LhsY%!r_G=^D^R
z)ce#(A-(98NEuF#ptm82^+iZ3NAI_IVaE3#!MqB-2<31H&4QObiGNgh{iW-DE_vJn
z^)K&+mT~YqXGg=i0-44upo!C-Rut{59&+?=mcKQ3RHE6r0264kZsBsp4pXhVU7}+r
z=yuM?H(&OXB-bIaL4u@AHR1mE3&r?(5B{}3|762IcNLC7*v#12$ll1>z{r7ElaZJK
z$j<ziNdJ=ppWOS;q5tFTlx&o(&Hko!ex`GN_E7lu)6@Xk8Vi3OnLg0b;lCW{KTs+B
z`&|E)K>9ym{(tg>PSD2E@W0spZ)EwGy!>C%RGFCA|C21S+%|*62qP|hK_eAh*FS88
z5V|ai5WGs;oGG^p#Sw`GgFWBCu(TKYlHZ?Kd@{1z9gei2UbFpA7zd6!Wm*GSaRNap
zkNn_kr}lZxHz&Bj=xlrFaE_*8Knuz43%;aevT^Y6uQzb#+KlPjd;1Rr`FJM@_Y6M=
zFux)oB!Wed=9OR(=srY#r+rN6utXJTOudQ-7$P?hka&X?V5<I(BnEkW@dp=GRUdn@
zMRtFc8p21R5H!ASq<|!7jr%mveNiS-U6F=s?LtNtW0z-h6J4m%qasch6bb|f&VuCs
z#G8NV+~-#P-*{tYZER-!sUyUU9G@(*a{3PveM;T`g+zZ3<v&QI=w_vFWBFf>nDH;T
zf2YsCO(JAtX=ATw3p6nL>pO&voXrf3{yLI>&LZT%O8h@Z|1V|y+gD7HiTJN}eqs?*
z{M7Hi3iyvn7=GB>7$_Qjx($ZUtY=~dB_mhIPd)yJe*I<AXWzdv_c>1V)1~~qHGiv2
z#DCq?KdLOmjDHdS!`T12U;o?9`~fuilvJTlS^U&x2jYK@{sH{FqK<!E)n8i*Mh-Sk
z_J42e|FFm)WN%|DX!F-Ses*Bx{9GLi(_gP+WM~HbKeQ{@{B;DxfPcGte|_Y?j_AKh
zC@X-S^*^pfq^g7i-Uvqbo$9?Eg-E2ku6+b%Nv2x8K1sBq9g+|jlvx4@czAr0Zq5}Q
zB3NCj<V~;J+pNvN_`ym<O{bml%Uqg6Le%iCT(^CiCmZ<)wQxfxcZ0FR<8BPrlqKQR
zxuI2=u^Z(1?c54~aLZmk0$<mkosgTHasI3>^=yH4_s|Y%V*^T}$$r_PjNh;4B@NXX
zVT=u3q_<M`<6)XkKlAD|Z^`pnr8hOjyy-@9@J7@6dZ_kpk0|dj(sLT<8@F)9d`-qE
z&}`hyhu_N5gWwevgMIuCh8?p{OVFZ_3x|frjPzgEt|po(Clve98aX&tu92Ise8m;(
zib$>fZ1IUs?xIktW!Vx*2g{;0TjM>mCC7`0sE-8A2}0FTD=}l#EiPcdBCr6AUlhMm
z`5lF~X-7nYVEHwpe({r@l1(}<AgMR7<`&88P)NPRowM?_UmLXd9TGnOUbqT_%A270
z4FVEUXcA&|K5?yp3&qMQ?xdOv%mMRPv#6f0gno^pMHmXE0)l_dSNF#Q5Yf(tdQ$N3
zKj=kphrj8xl{)(?oMm@>fkh2BsHf}|gJo93ELuW4go&Z;e-ey|%H1WKkd6u8MwXxs
zI{6AEp<(<>Ork6*`a3Of*UO@`*w~Qo_6^Lh5DXQqt0o8c1N>f`G(g%hZNOQnBpW3;
z{wHxGIavW5Hjf|c@YE&P*YK$FNz~K=s+y#-v7$?S2*1!aK$oyFvP_|a!3Ag%)j6l3
z=r24}Q*~`yk}NgVTG_S&wL4`nkw=_c1jw5SRcdHYr|V?eg`n?<+PN9-Wzuc#0!pHp
zj%e&D1LHw^*-rcJyw)>-qJ3FZMi~FO=^`YUVm`P9`-ml)6|n^L<#_g-G#$or!1^~A
zN@H0%2rlc5&~#IX$48+Q1*BXkc{H_H8eei(s0^|0Ur{>l+;*tos9*<JV}69b)Jjm`
z?HGCu@+$_knL<mcvYz+NDgwgdNvK`*l+{wW@`AEjNwU3aV1AsG2gVkuvtPsQ#9~Y2
zzel^v>CxbtRD^B+EZ$SXb6}4qwYOX3YCCoe#u%xx(kAl5nHCMjcP%}jx-ZUk;DOaw
zd`ZOF+4&OSx8jB2jGzxDbVAD9hZKdm6?nO<CVi1gkdwuWlBvutSCpC5!ek?{fldN4
z!@)qTq=OUBl50e=de|gnsUNskct(?ZdvMA{ZBl;SGg^EB4Z@m=5At3l#iciCq~6px
zW4hK)(@aOF1O4<2()xV176+F|56ZK39fEpBi@X)ps2<Xjv1B9qtreiv`6^4L8w0O~
zvkC9cnQtCa(?dX@a(Nvc6FLCv8%Gra>r<*pSdi}J&rj{>WBRL>f1FXytW^guweQtm
z)9U*DBKY3BP!`Xd0LxJ3Pg;f@=$V@<HUW*zaXd3qng7SMUY%ZBCyspNK*$X54P&jM
zEIJRGfYG19j_)7PcYC(Esn%^D9L{uDyQ>-x=hVF3$JLW9nK%(1hV}CY<4c*o6R^F`
zx29ate=6eiTM1|rCz0<dtXeTiLC0*9W%TM1Tp-Rx-GhFc0C|Y8lHT7O2X2WVI*kdL
zYm}}@c@1%mMQt$L$VaO^$(eE<Dbp7Zy?f5KRQ1tM#_=hW$7|OJhgKvn?TSlWoY9U5
z?lDsvYCFFh^-95~kfmvQZrPF$2D*;CM)1^?aMXFB#{WF!pDhM^wdrC?$vL<y`&KRT
zaHzp3ns&9M$L~EANK?{orgU#;%SaF7L9TPISIyo0eEX)4<k0wZ2R%bv%<$E1Tz9{|
z%~J`vn3C?RLE`;6!E8!Qdm+Bl*v2xMcj=duW!~>fxPune`+quFQ*K8~bvqA@`Ca^~
zg+poY0o)s`I63xMok~^n+|UEa=CF0%j5y0lUa!Jgd=07MnJM|z4l1v-1N0_hoXz;P
zL~PpE)X=vop|%cz_AJ?t_m;qAE2Y$oIkP4=`XT4i80!&p3`BF&KcmxxA?PtK6H8t0
zm%nen+NQhy20a@CSJ;mxoqk92GeMjD;>?bidF#1PiCMCbKf2+~Y?Gu*^#>D9(p`mz
zU5*?wt|a0FEJjR}0i$IzV?*vs+1`hq@`N*aFLd6;WBJ2-+OP}Lw&f7rKwM3c89^~F
zC5tUm)*;}BgvhO|s0l%H;xUgU`~Sn-JI2}?wpqH%wrz7S+k4rzZQHhO+cx&HZQHij
z*;U=?^Hud%)%Bxt`pjQ5nQz|YNoMk7Tw{#;R`Lx)maNI}<h~CqOCLp)fHpmXMF$*I
zH*FmRfX1AAzLg4QeOgv|O0klt2d8uq7fKui$8EM(6W=KM+3IHouxIzJ59ZUp`SrwL
z;K}vfyH&+Qd1=y}+YEnqANx+(9+mXl+I-b}tUTiLy~{pCw<j%G$=Rqk-^OBI+6IB?
zu+B_&lgVC=nS8>2g`z9(zTlCqD%=t9jK_3=rT%j%ocqT33_wF4hH~um_EdsYQDDgl
zIJQE|%>xK%1tevaNm<ha_mNuMhQ$4l2s+PR>J;EXq|CD;s)CHn-hc`od?GV4o~A%t
z94Wl1VZ~+SH2pDR{sC@#4_$ev8}i01OigQwQ}z@grEyOLeDqiz+P=5sE9y#Q1sU#_
z5*hjLiL1=)d+UzF<on*?4-q`OK|W}gg=Q+R737mM*U;F~!WbUMkwly0HGd6fhwV{G
zOun-)Oy>&)@%cbTmw^IJ)C}eEuEJ>LCOr@OM6V%z{4FJ99~~SA<t0MbwmKW93A2if
zk_s1kAS6Baj0c^z-Fv!$)&}8<`{{e#2%jbNgO~Bo3}SKilc3w2)*-H;4Au8~#e0`d
zl|t2mXSub*e*cTT$DUzUsAzbrHz+jcpdIWKAKTHR84e2Xs--f+D_kY88N*F`b*5X-
z)oG^`j*f5Q=w+kwhSWpY>)9tAOYw|tdu_!lESQ3)T91!y*CWA;bybt4U^~%i+|G_G
zv7t1?AE4|6@?VVmv~1UcoG(G|WxFm*kZMx<GHf011q8Gl%a-h@D-y|n{8q6=07?QU
zuH_B{B*#O`PF6Q;MMQzmyQ4O!;@VSxm^96pStufV`|#gES)iQ@7n}W%wO7DzQdT6o
z-4XNy;Sp71JdNE@?lv@+8Wld@Mumnptw4VS9&3}kQs<g^o*ti{8`HQ{ZF$2|vgenc
zU$TlOQPbKlZyQ<eYjwW1!dnt`*^^55_6@YYKQk+&(N0jXTJ<XjbsB5Tr``wNIZ9Iw
zX5}#%6t3#Nf?pIVhj954lfL$>TzH>#aiP)Mv|dwzz=dyQ-ZmxH-huZO^n2z^DHV;>
ze*X6SA*tR`dljxr9gbkGU;A`j_m{-pE>nuGcv`)a3nPM;XQ;RYX0&0gyq3*8)N_X&
zyip<^Z}a_lD|Tai6KOo+>$=??<G3!xS7J&m&lZ+6=`n{n4~G|8CI(EXZOE2<%C6vC
zhH0NnXTJxdHm#!{xpk?Xwp8PEqnQhI=Zyj;eXAv+N=B2P@TV(F*kZ85w@*|b<)L=h
zj@jHt38`tbXcE{1E?*H2^+wkR|EM{1F(!OQf9`uL(<Cfy;YD}<0+B`Utf*8Qdck`O
z?aLp@6dBmV;UcA3TVRn86NJ=O@enjMkz0TuL?E<#k@jYZ7zvJB<!M~dHgxt$C}YF9
z&c9dxc=q;uT9Df&>tu7}GhKd^3}Nec+R5cgxPMWu<H_<IXdIUfdWuQP<7h1&H_PQ_
zLg(sE>mf-X<+0P<Y5Vx#mYWX-zlD6c74}Z&#KRn*aFl8w(efp<D&Mk$MW<M*qaQ2D
zI2&@B+7$G<3pwr!xGsH=<EBiE9Qcx6DJkO|W_;ahft2dEP8E~E(Uj8-^nmhsJKtM+
zoZ9Myho>qaZgzk?p>~)~r*jj{&h>V48>x;pMKa=WZPvj?fun*Uf%sf`$nHWh?dLUn
z;GSc<fBbfN$=%}1wPl@SM@d3lstHk_-Wsa4wNN-+eY)CH@!44f5s)P1pjy(vP8(&<
zOr5a$l!A!aFyxMx9)^%cBbGyJPg`F>F-h+`Gu{%CdIPrMB)lvC5^%ZUxuX6(J8%W7
zDJJjOvWsyOcs&Whw=$~B_mSd_1D4_?g1CGy;=lYEP9?F&_Qy{E4k?5q@-VljhmSd6
z&9npS+(|^pw}^J|IRvZydpzzlkrE>712UU7_Izy!)E(!nmQt?7XK4q!!{5t{>E${r
zW@L}vYziSw>h;aPFGIIYySXbHUFN;s3t7+X(2_Q=v+lXxOYySQBmQRL<>e}Bv)cwY
z0#ctGT#603$LtR|2E=1Hm(guUbXOG9-15}+vT>$8c9>|ls1>_rf>X+R?xlfy3v-*O
z3hglG`oRQ4oFGRB%xHbA8!+Jl@pjPp-Dv|L$y6-Oh@fYq_P4ib2^(^^FxLe%x*kRe
zjg4{++szUB0`B&QajHoK5>O4E6CDvgp&}9Jk)5hjlmSnqv&U;GEdQ^-eOz7?$9?<P
zkp)Yxult>?HPxLoOvad!vPH;pxiLQ2NAWuV9Q=B|>GzmaR4V(Rzo>jmGa{C<23U$;
zI3X5f9|`}^OP?4hVdRN2V#k&B^Y$dS2~0<l3C$nf-lSX1&Vf>mT~_w)#kS~m1B3wt
z@MGk#^rj@&C#Q79nJZc}9iWUKAm|pc3HIHeGnlvE8rsu28b*+0C)@v!W?LHXWI~X;
zI~dgcZIu?h#m$l|R#MN8#=R35L9Wb%oq*{1n;08IPFfHlwJg`nai>p_%Xw=Q!YwjH
zv0`?Kmw>_VG>fVDoB@=~S(187r~(8c`YuXAA<M>PAYjhvaE>T%Pz>)1`zf8<?ubgD
z+g}JjF=94nge{}kc#f!vCe?ZK(nq;@iNZFtI3}k?g{C`Yw1^!qKW2_r*(xAt$^|8}
zFV5sp9$&fKTKoL;`o4;HmL|df^#vrAlm;r9fC8FyA&Y9_Tqrc#hNie+8xwnZKMYg{
z;|pLMW_wTDr&RsWYL+WLHZ+%bcjS(1X&<Vt>rgZVTVmZ)FQGIeB;~wc7?)8`lfMB$
zY{>4tBqz&+<2GFj-Xpq_Qy12o4d8sOynf^d&{c8C-LE3D@Gh^Yh+Hm5`Qih+p_`W9
z6Gzu9B_$BVjFL`5%}K|gECzPsoJ;g&o6`(fl!6VILQ>y|w=*HSwXIQKsV=PDsHm<D
zio{Q&k$YZAOPrxDafX6M&_`|;8gi3~Y#7>~DJ2_i;;b(+ieA-UbQpJ7d03BDs0x$_
zSTj`YJ_K_?c&d^_WEM%o)*$HBDb7K!g_K1gu)XARmWWN&${7U}1TTde&k38X81V^t
zo=<4fX2O+JpiD4NB(yN~qGuXnC4E)ts<p&cHkS<{(!U~Nx^^+^mz#QHaA03_n*XV|
z@cf@=r{bt~O}H(jKGR^BDRV;%UeWc5C(K7`!A()NR6y{QbU2WxL_f~3Io$Ld-+Hcx
z$AP)AKM?*P`5NXtw%Q7g;a8$@36?Rd>U~-fN|ba!o;O;pI3Yv+n~G=2>CwU43}uur
z?D?8-13-Vw@<WqWmVwsv21Z9BhtApK@bzMY(bdu3CiQP5=ikDFhte6UOy=rs&b(7c
z(?I-^!SP~kVI`;3J*{aJ$|D9+@(yleP_LF=?9}QW)I-a`P=h~CnrD`YoGX46-rJae
zuykb{jdCN`hyqD<gk~6kX$Z7*fGlV7iQlSVf_E`G5f;8|wp}YTa7R<B#z;R3!e=5J
zIxbyR_$<VUoYeq?f-Ildey{eX<H_%ZX*tL^LBnDeKfg}ypt-@cgR6ld)qaL*tkB46
zst`3JIt03Bf=EFP1e{HVX;Og+{LD$27U@@#s^xqr-9{e6yc0cap1?H6ts+He+5!Ht
z&p_(wTPa{cubaQ?vf(Tso}|%}zFsuR3QFSZ2XCOe!zRAPwVr~&%aUsSjguzz0t?_B
zk%4roMn{lXgX#y&$JKE;$U?ek!>n@~HxI1?z$fC?x#maUmwU+LG1!D)YK~Nsp++QA
z=)1dv@pc0Hwi}^}IpBXs$q2z|_hUyO4i&aH3j?Qxmv)&sv&@)Pb20Te3f6|%N}QLL
zJ-0iv2Xhc{45Qo;u4#*$(Rufk`mwnMXzgiMIoK(bcp-!a4d04kLNw8We%SbH)+PU*
zF<{V!9VT$3oo#Exh9(S1STEqJJjn)AzhSL28CkumWw+yiN;VuB+bK!x#CC6i)|!Om
zQZvM#qvFO1_~^JvQnCfJO%PWIh8WCtq2JiJOw(E<%H)*6qO)mYeKz8+M`$rbpvkJ$
zv3J@e^nq;cVJ55R+Ct=~`wQiu;DkX4%@uOSj27BzhH*@V)@<2Kz^*ic<c~;_N1BX%
z(k$Tn(dqfTc!eVZ>!?ZJOro?8?VbACFT!@SW3~IC!cbbjjk7vX0s};tJwVxTc!5R)
zNk8$vd$=;}*L^6JZR}0xQKSL!-Fk}oxu*rnYAjx2arkV&E>}PpWHGpG08Tj#YwxR1
zQT__cO)sQ<UZA*PC%sI|5plLMHjD71pF9wB%Cry&2AD7iz|c|iFg5kMjkbBx?ecS@
z&Z9gU6*{b?iO8V~_LvZYQ+6x$LHpIS<dtCqT61b#Q5ve4{A;kQCECA9Kil9K^Z^IC
zl#Isbb+sY|)Y27RnkGZZ+UQ_cAH=^;!m-U-)>aEsDcg%&P0hPjc{)!(QWz2XPe?Q<
zYxkn?11>T<dn+>_q!ip;FZ^!Z)n5#ALE+B7RG0@)g`apj*%i2z0!<OiU81LJY2ooj
zVp75_qQlloS~$}Y6OsJ7$j@oysqr=EVg9m+OM8L#wq$~RvHzmJ3+<)(u?0|jEbjj&
z82GQz^uO5Pe@<5aa?SsKocg~Q>fg8jzu=VdfAgmP9Xb71qWKq={zvHaUr+V-_x}cV
z`VYRvf5uK3+5XMkOR?}I)eRe*5k&9Y+S8FO0Iu_oqqzp6wGdcMLPYAgFa9{mh-tbN
z!g7f5m6NRVoE&xgasng}Yh~5HpIlDmhkGx#yLF1f>Do|k5!IyOop<WAUnYtX<2Fqy
z115ZC&P-iyjwXv!19_s>iK-{5vpK$4+qIjK&C-Ti#ZNaUe0{amKGB%X=)F&=p}iQ&
z5k5{jSuq->qM|pdeAR6BFx1#S>b6yQTjyI`ch4&igk(5j)+UegXLBCSbA}D)K3rOk
zbHnCyq8z7gn4V0FGuG9Xvab6TQw4+d6qX}Zti#d8)j!Z^triXjqDF(9@4tMQ<5_#Z
zg}0=`8>O_K3unYpxv(zR;5lMD(!~ENK27pztNbca+bKcb^<E)__9(K-{rDA-(6LxT
zrT7a3+L{F;v0)|3vcus^*x<Ov4jh6|lAM4kt*1745?yZ60mD11xmmP36w$S!B7$I&
z%5_i)ha#a-{}vM(<!3iRh-o=H<$c~mnj{NM+?$l>6Ak{PI0F>O)%-)dnlw%@%lPY2
z<&(Y9sB}QN@g(l)>XsfklW7Wl`2*C%wj<gn42ejVMdj3}pg7|t4|{CK{37j&mU5Ed
zPgCkj%p3wzBMgpNua*F<kPQ03N&%N`@sI$qWy$BR<m?U|+PuR$wirCQ_3$W9eiy(!
za1}U^$Rv3&qI9zh6<La5d8WWP9M+KfK^i1}NJ>v#Yuo{N!}%T$sH6h)Ue<A}Fg++r
z#b-GoMindV_-xK_UGSjr>J%Z|-2Pb772(9+`_hEw0`d5cJi{h{rY<!SDGC*UYm-%Z
zqpxVv+YE((bn<DCKUZM9l2OXjG)czlV%fX?c0W4ql+l!{?F|U70)vw2zlyY&vYW-i
zu6DGfgjr8$C@D0GfMRn)gI4C!H_O#c<@-R!Af5mZViYP#enq0@z_y_W%yY;|xN(Td
z5c3^^l+Ti!23`8`iy_tp{U)syN+K9qSKY{pKAb?QL8GqScTVmS8{4qZGzgAQ!GO{L
zxHI`ZPADJ2ptLc#K_Isq#{d8vSC#4p9EPGGwzLT7hTzDvcrS3qvlMAS8#~NKaZ1Ee
zA$>p_t)(EcCD-7LN(#hC#h&zZDM?xr@SDFS4^2X(B9}iuC{Cgnx_;^j2R^ics`OP3
zt>sVJ@yaMieFrFmV%QRMgn7l}kezXIIO!A_q4OA`xMG+Tx~4VHB1l1eWw4w)<RMOA
zQk^$f7dJjXLv!SK?DCD4(SUihx+J~HTIqV6?oJJxnUJ~j1L79Ss^*sMN@kscW#oe@
z;CR5#2n&Q|u}%#eoItG$5#D-?q|IyTrAPC&-I2;N{rYhxOF~yiZ{CoP#geG>T!vg`
zgUH42?v`ar>-a4e0eoc=Y-;>EVe7u&LQB|Z+UqB<AD_OZAN~hAfOqnvCE4?@8x8HJ
z8Y*(EXdUn_P!w;#iEHpfgf5#76SgddOz(3*X$u5I<P9H>e1$?Q8bhfvpd!}+Oi+sS
zknAP49c=4D_1vF7A6S%$vKF@`Vug<Rj2AtYK#Fu)aA?ABqH}F+a#EQtvYVG7p@60S
zco7kE<Lh`C6u~hCN&RcIR&gS;On;b+tpLFNiaVdmzf2#bJ><wFw_zs0HzCOV;T>7I
zSgn#N!cPArhIg&Agh1%wq!H`mb(-*5uG4XB1;)(c62ZT872Xlx;&y<oiUi%l+}5MI
ztmO-EJ?E$c+wg0i;^B}3cfC7_B(@Jo@@3J=f!XZkg+D+l&k31rc!rInwjH9Z&A;Q_
z6t2D{>#cyZzJiPj<Z1;<(v?_ZX^B_(;mfc4n81<T;vsKfp9+ZqylQ#BJjB+9NjgNz
zV@GM>fK2PcRx(up8b|s=R~6ecF7>ja7y?8f6%D408M@`r%;X7ls)IDCH?am`V0zJ6
zFS%lZ>Gg|g0dlHrYZwL@*GW4DHI)mJ6ZpM)0in8?TLU#GVglR+egaNGETX@0t9yI4
zd3Nz#F2;stZcO-8LzXTKOk!j);|3!8|2}i~5g<r3(LZRCa)aiRcGMDAO#jM#X-o^Z
zk4mgsi()%~?d|M-%lr0O<<Z%+au<jm4tlc!MoSs-YV6+F*5$^#Cb!6VjYU=^8e>mi
z3UlUOR*i|p5rt__Dikaq@%`C1b$;G^ewY8U_H_KXZOfj%Ymu@0?9ja5hB>r}pJnsH
z9gSiM7#`J!dYBq>a>aI=Ja*G1ALyw~T(e?I)L#Kr@)w`*{xh!Cvx?rgT91=x=KC>S
zKn|B<l`)YRD#e<yurN22De{XsxPT!TU$;?niuH;3cg<Nkx0<?7ax$r)smQaNuG`;E
zr|!WOBn?v{xZmpXD7LL^M*3K(_9JYr85%TSqRDfhR$eIGmsG}e=+sDBaHjZNH+v*^
zkukIOLU-0~#_nB#4(~mXTlnZ8^BYTz{v44lATB1hC4-lvvvaSv8#@)~eNpDb-Tt+N
zx96)H8+wGW7lk$CAHZF!D$u21j2@jh8B?F^JObd}G7AVa*wdqv5o<%2pw`_0RrFZ&
z^P`cA3m><UyQERH!K^jjl1FaVDWXPeWTp!SU6H{<Za(R)g4^twe#cIeM1CF(PKNm7
zf>cV^2F~Uit2#I)7c=a)Z*QtIk)^>$fYZ%{zzA)2-;NuO<$+t(SJFLh27lRn;}rZw
z+e%&juJg-hzKxw_T^V1-Ga%&zMtWh`>%-FRBK<d`HyH=7-;&WR7~JXo!N;rcBfaVV
zeN6shRtVd!(Nj7dR^D9jQ9Mgh2RJ~0M_4dxfB!KD-KopEfh=x*$XFxiR1@0LOr9pd
z56u$B=dt9>j@&Z^+xj3P-t0*>H1+-8*&fZ^+*-<7t{c)jHUc4&ovp8J5Gp3GOMEGr
zIXQ=Sgb8w*uMh&fZ+|AFz0954RATWpI-4o!B`$qD?VC9^uXtO5CSUDNBR{Ub?S9m?
z`%WY2&VbIiTvo9$pM*4;#91v4wE?^tnMn0+4}wAljbyqQ0hWTSR?!R%{n0YO!q_6~
zZ)l%#Jny0#?=I(yW5Q$6WAX9V=|X1dABAVwMjZe)K%<yxj=vIbYPb5y^eJdYuEqe9
z=5p``OP&|4Ty%2_w2yxe*_9TVz~C;jTT(0LrvVLP%2J_sEsO`OnN->wgx$Y-T~`ZL
zI!sRpp$TS;t$aQRbohzpyuor9Uw__`%QHJiHS*EZfy&AotT}P9yM4V2P1xcN@`yBt
zxl=av#dr0uiwF&^oZpqE!M~c=TkX<#<u8c?C)kCk-pez!)vV2Av{<e&=Dry~I-+HU
z0K}{})vEdogq0xtX{z6S&dZMSVR?b{%VK^C?!zWv#dP_6jIuFTlAbNO9on<X2Iax#
z$=T6Iv!bOqNSBHmnUm3w1H*S)uufspo^aS8UZdN?q*oTwX)!lHU?}K(<zot^)B!!f
z+L3^hdrvGmA=n?cf^tOa_caYFg31S54Pgr~iWa1kqefTj52%3C!^Xxa%zGaIO5*Kr
zM!9c$+zNz6osSe4_Z!Xtwv^60`TGr&<yR&!F?bnc^aP5UEQZjbf3`?nTMcDh6>Fp4
zC~$LT04?A!wHRBSA_NslUW5PWa$3LDA7)U1Doah_f2IZg%PEWhFSWq`DMi8fe~3~1
zOBU~6f))P_THqgocmKH-;P}TG_+sIMs+zW%?T8|}Pt>n&N=oE7+iw`P*~>#V7aBla
z{BkG}RqW^MDpX^z_ctF?aon5@jvJ+%5KhPadz+?iEoogIhA8DjACU63+4HZeJ%X3g
zatv+ToXu`&X3lKxPbVDZonOCSG)9WhsP)iu$!t4yOBz=(eV;CB7kufyIos8w?6k0P
zO1D9aJr5S8UgpZSJnntwjiBd1+iidI8a9`eCBN%6mMQm)&l!0dGS}-csfcK*lsMMz
zJKfzJJV7S(x_IVycj17^bUk}<hw@Szz89GoeQ05R1E)k=aF0FCQ5vd4wdVjaZGFn~
zu!dr~q=ljcBw+HjeE>r2h~i@J<3S*OsO5}B<t<ubi-sv;zQ_$_&W_+Hxp+gw4<Uu+
z6aA(MNLR3c04t=-Lmzz`jRT*NXrts3@QW14#&qEKnD^fQh)47f(tN3zr4-3mMC)il
zsBvsx+ZUO+<bVC^w@1ZwN5ZT@t)pNp@~YYdUivkMXU$R~1`?vkolNEpB~RwOXYmj-
z%RoZ(z+4EY0y>2`8i#`W>FK5{v`G<<*Grg=o|JI7k3e9HkA?sqM5L=s$j7MYyUeox
z@lrgcV?rrU!(=b}<zpuiCD=NRRtgFjO-;8HgRwXyHORJBq~LdwJ%|p$jtX(X(Ni+>
z3Tn110vIeNFiAG8H~=vvgNiWEofQvd1{*lmJ}i@hDBnpHjR8{wAuC>%<E01(?r%p3
z#lxxJ+MWfcUZiPcpbyUq5nwo&hi0ELZcg7&RWg1xZcT<NwCC*~#ouCPq96|L#d52|
zm|S%f5ED1mjPemDB|svOrIdhzPUzsG)i_vDY9GG7?a3+3u8FYkBks)KcHSFYQ9P(f
zwJjRYl-4bu8=Ny+F}vBMMD8II0h5qaBP3%4rumjHu?CI+OpO_3huUWr?YGvaTPC7t
zu_1{BtWW!aKJAa=w@n5}TY;*#T+`5rGZdN>Jne;}sV$&3n!YDx{F0EmSpc;rsiFX=
z-2@Y|OWnE|LT9bro`u1<38f})i1Apzo}OsRKDJaNtKQbQx<|sHcs?e7r5|6^#L|q0
zfxs#PLM=_(COCsik|49|z;hEw0F#6?3)Lwej2oRMfUP<4*cPf8ITkGAkpAF488b6%
zg9)eH;#7=4Ws9_Znn@-FKoqIVFUH6ivEWCCD{rbu{o7L@j=ehuNJe+8Cei5_=0`NW
z$r+IUgz`a`_dKk{e?$}ahub_KGuGRS(1-B@ePLCxHLJkY<)(zG|If8g1VM;RwH04>
zF|YG^!zVA)!*?ApF{kbe$?bU^<zcm7u=v!U!p>$0-cg<WrAZPu@E*-9bmy}2!2RlT
zg0tVaNX|&qfl2<1aN~JDDr5Y(B}_?1t=!yW`Cm>Za=6(U`y<XP7hD{@lqc9vzgR%3
zq3SXV#5Vld`g>5-JHcDRP|ZtM{Z2Ndep_&%Qo=~0RZ(I`Qyy#a-ghI;=hGZpw|Z*q
zLEHS=GWjSgVajFh@OGsWGi%YkI{bafiVv@+?=|8zXNmFiGV)ZF<I8r$y6T<NusP7N
zU1(?A=}*65CEQ>5UhcJ7GlUYkE<I=1DfnWK6I;L*z1+Xj+S=(nx8v%mY(Nn*6PC!-
z{Hvjv8i)NuYw4FAn<H0_&1x0c^&F{f=R+y@-t^Xh63zGKwH+KOZ_n>%A++8T*g3~3
z(I;cl>C{kT<$|z*Y_j1;SoeVrPDjKmRA7r?;YdW@GAqr3hWpE`%!|n0@Jw9M5d?a}
zt!O=<`v}!}8^tX|F6X<ps$8U&&8@&72^YDVz(tAQHi*r(MQlm@*XOr@J35B`fFn-F
zuM2!1G&uv`C%P84BJ$nsbnPac6Xj@Iw8PdF9Uldr7*3+y*|yIU@32ShM5M_>0HRh>
zOax(o1FkFpC2b~tZ#96g$iM~hO<o(?xw@>;>YAYr6I;$hRjIA#_bobYKHOH@6Kvx?
z%``_sW=w!=vw6e;+SyUI%km`0l$I|cs6#1`A32m%=Uh0vR>{`kPsXmjVks97Z%-8J
zx8V7(17wqx%k!jRn(IBRAi=yX<-^zT7r4{pGuDsl%T2bNCec3@%W81gsG5UGs<xZA
zdXCit$)bVEfAkw6g#r_~&%f;y*k`ziZ)gQT&58zI^HnV$k3D>Npw8OddXoGe2JYo>
zADcpjsJ?9)@!ie|?_z>JNJwMz`ASH<=}FDS#4{bF#eb>^bh~)*!PgoOMg(jY8Mojh
zomHaWwV)z85$93ip<-6qJ2G@cR`3cf^O-ntG>Hm)eS_YL4SZCC<cY%SMj~g@(C@sN
zp47NIS0043fBytHRzRN2(%m9I6@`S>OfjI8!VHkyULq<Tu!|iaE$XtmqP_t(GyJsK
zn9d?sg`bhYi^Wdh6++_8D?FPjJlk1eWQq3=W(?yyAIxDJ_jzpuc2Vvd!F-NmaK92&
z*VM3Q#(B<ORZNa0@VhSMUm!hHZnY3yj|Z*MGU$XmIO$54&V@1TNRcbHt#i19-l0NR
zw{x`!{8qi_n46+USr(rwb8auVJFgRFbKJBtbgkFCUTLGa=M19ryfoD-e{y5?FGR1i
zeOMnf&gD&tx~Y0~Et1P7G7Qbp#=%{ux)o>c_>r#1vqlBRRzG;lDdatXln%t>L*+48
zILH)=0k$3&oW}`iJ~}@=UZz;Sh^+|mqK5Lx7}r^7iP*Yy`4AVuF{a1EVpbHjZPpS^
zDYS8zc)Xzw53P__tM_*uST53R%v>3gTat!{lU5tMwTqfz?Oqd4t-|$p>@$GYxW0gE
zQ@L^72xUc`wj}(xF8tLGZ$>!;-}2EEa+chaEz!iQ+#c(T75w9Lg<~sFoy@(BcLKRS
zJLIis>%2O4KNU13F%`=DFnSZ6n6JocAvg#D&+US<>D{#qi>i$eN-Jf)n4kce2)AYV
zNE9EMpJ}hwXnG~5Tt7NHUQp%K(2&rC^j1$-e0OSZO!Z^eNiO+0Y7cocW7zo47nGV?
z#!cAGOumM%v7gcstUIQ=V;Z5dhpyv+2N&2DUyXaNT}3E&<22!Y_m=u%hLz4$%i=N>
zY~G2jL<hP^BrY6}w(ypyTy%XoUe-w6@4H*4;^*dg_i*d(&hi*)M4O5ym3I=$WP@k#
z)eSS)!7|>l>ZLQ=#e_#~a2fHORDLBgzXl(fnwsulrU-VUk`k~5a&_P&#Mik~<AV(r
zXZunE=R6<)T5q<2JKh+#%ImxSW8=cYCbDuc_jv77?Nf8B0OX_QEyto`npu!|WLomo
z(={PVp+2|4)n)xML#j<fMtDz!LJKW)C)~szxCvv?n$wkwz_ts}uvfk{nlBq{1@wNa
zT8`%6pn!No%Qwo}K2tJ3SM2?MZf}}D{PRxNiW4D#5LR=V5#i_ZgWU<dyjYU%lN)o7
zMA54$N{0e70)e+#f8-K@Dg?XrnW}r`rr~3V%k|9A4^;A;qpE0yL6o&0t|S9`6}})u
zY!0(=D$HlcM|6pzNj)uOGDUoeB5AX2>xG(OP+Vnpe9MdE@=&Qlkvl@&B8kVcWts0`
zjy|-5y^LIq7Gs<+=LF4p(sUU|6VN^FXUq+2x=P|=6mjP_eX{iWp#@*`e8!AC@_nU5
zt41qp(>5rFP-BBdIy|_3V9qxf!?0gTzgR_Ba-Fi^tm^8tRV-4&H{YC)ZW<{zuG^kt
z+Ixr362))$PZR~yKY;xIo9+U=$UjeLGyZQO_<wIS{Lj4je`GZL>jD2;#0ArTvFF0{
zw<7g#LfS#9YYxb&SUoF>SrgZki&@^{sOVNEjK6pNLc~#Xp!Fy6!mT)32=5{f-A_JJ
zmx0JAwaR+GU!Jmj7<0L~9fs52-iqKjm<{h_a}p$loU7BZz;0;W=*X76vbeqOmeXU|
zkh#=!3(|A<uRdSKKInKZy)hkB-+!imK)ZDwIoVc6J&q^^b*D=X*@H$Uz%4Bagl{_4
z`KE-<y*RH+x8d?Xj?kB%y?Dn!!3d8-(xP#_m=(EDY->^z9f{t#kqk|QLXAdMy1sMD
zW_yx<myOTe&qlonu_&U4lsxYA)iV|%@evU7#=)V3r-q;K{rpNb+~+2(875pd$iT-j
zq9bdDYiUQU4Y%>uGwwlb5qh+N#~-cT`)wUqSt5Mc%	VBmoo-cZwKeKyU&=s@N}A
zNE~OuQi{B*q^5YET!wfDFoXul!5G<KEZTKj3ff<T0-OY;Xe}1BYUDQ&?zS}xBASFi
zzz!sUFh*!v4rvO9qUjuO2B`ydGzrlyMA1jr2<EU%yp>)?C>W1T#lc^O6j4XrRgYMb
zg$OiP5D~njkmMpJ?JX?`J5&#yT+Z9Du7ypA9dVnY0&}m+qe#sRi2B!Es8ebQ(IOj5
z6*B811e=yKI3zZu_eg0%(&!%*V1-AlZZe5t_Y(^E2qy#YBQ^$sB2MiN6R{ZLRvRaf
z^V7r9sEL|Q;%5=rgFW=Yiij?tL>!NQdY@#b379LEVBcqndzi$=l3efi0OpKxr^SX<
ziePV|`mKr~U&No%Ndc!k`8qzOE`)FhiE2NpIt~>QWs&bDjVUb`{)gsOUAByd1G<Kp
z;=}NdV*n80_tjxCW745(B4{r*_x8wQND%455@Ud^ZkQSt^vXD;S&Dq%aHqI{vsLky
zx%o6B8*<#iQYapLkW)gPI`_?5P}^=&b-0|skzatYj~V%G5ZblOt{)u8xS1q@hxndc
zD!~vdlx=m)!x5Hz=1IkGY6?cGIcVF7d65)vGj^b|9h|}psQj$NTeJwUm;(4Q@JE2S
z*h|}fB2WooHDE0Gx(In$P|_=5Akb<!It%L6VJ3_0YuZRHq~T43d%>YFJxmsiV)qzn
zG*uxYKOPlm!jT2pXh8@%7IpMV%^{f}!IFmLv~@gN2bm|%mPBD%G$wzVs&w^8D>{eN
z@+38l#^6-Wldu#rdd7{eTam635holCiTUKytO2s(mM`~vBVKzoMCBNHpLt|@y~X=$
zyW>XYyZk6}dhmz41GWdeQiapW%I)Usov);rW%XDlDpy$$9$%p%{PaE0+;%k!2b+h$
z^~PwG(yVnnS|CY9#-&9x7=0F}$nB+kXZ&UFKJy(~&<v7Zq1fh?^lf6;t&0o1Qj4?c
z-wtcC^$wig?MQDEv4YHee^<B3bw1#!Caqcrl^~&a50K&GwxOn=Vk-?xvV6AGZk5-0
zD}XDzm9t@VW1{}OO+@ZV%5VKWWE5jz@=h~gVqK1n2-4GWi#nwOnCd1F89xEz$tIOf
zJT{}C8W^LMoY{{Z+1S{=7TqDFsl9qr45BOOgbxcptKwr;w-|cmr{~7aXI{$WZ}$x-
z87uarc6J~#<sEY$n;A1_?y2db=|!_okXBxd@E5Y_oGJv<Sp(>L#-}2P-yHOgLDkB1
zuvYhH@8U0{d`9Ye#kdP@oOE*s^`_xJ<+e(4!FnH_er+a~Owzzb>Ma(|Y{>OQ*zsL6
z@ITu)En8VS#6GOp0YSSimWt5dy3~%Rf{TFBhKVr!FdvJ2evup5r<D6#<=0yrM>AiQ
zxkn>DX1V;q5Atr-*}6|6kxCib?-%W3y7mc`=CA?PKxKw-J*M;;oBw?6%F7eHDyh=X
zu+y6>4-6x~5fx_VHI8-9GO0RFv0{7W8KR%!Ye#8yb2o{(HDiFkHyD7V*t+p9@^+jj
zbkOZ&lYJ9)lYPhgKv_~w$G&F$J07}|Nx8m=HoawWq33=){k`R6HuPw;W}bNO{`RSw
z^IJTL4!*pX@{?vUxZl|q;j--DdUj`SUL;7A&UxqaGeXE0juiFPJyte-odvaG`D`K2
zq2fvHZDf#6wA6+jUKi9(?9<ulHfB#Pac1S%AxSeTTr1{nNg}h=!fm>lvEZ&UiUxi%
zeQFg=xAkw!yeCGgP;<pZUj`nh8;gnC>qY62Jt2Dw7nD-sq`<z}F}6i$k{FiwqQ~xJ
z_J^&Buo6cFOQ6uW>y;=dxGsEjA6S`CaVKpmdA#az=~%(}4AYhIyhmf6f8_eoAFEv>
z3+hO<`Of~$54edrv}KPsmZQk*{#h>)Ljlfo%mkZuS*lx*l=E!q_*f&wvLIPlG__~t
zZwSBGBCi=4OsB!Kidu<(nQ(48Sh;!bIFcE?wLsR5Efvf+a)RrAl!n4$aPqsHRE8R|
z3>NigP(yeOmfWulm2GH%X4iszgCa`u%4+N=o=9aHwD}g83Xkl>VyZUv5*jheK@R>l
z?>>R-rXx7PM)_HW!(9w*Wg=7PUK4YJgH1V^vc9WOym9@=6qUJFKYAKkqPS)&kaGgJ
z#x4wLi$kO0wuE?0#4)f5JsarKt{Z7AaZ;d!enLvI@12Hi`s4ZyKN4Dl%kImf`_rF{
z?%vt*7@0MazRQCGKZf&8mXqpNeZFU?8?^LU6k6O9iYgf&5o%n2Y>XH8@<&GM2NqEw
zJ*$OEO*Xwoz3Bvf<w9}#3uNx^)vPo*=CM8F*aaku4U?hk7^cdXj_Mt=X3^uTgj{=5
zZQ4h3T2~9lrjqlI{^)626XJ)V;|xb6w?Jg@k`UiwzM83p=!P8H@_wspH0G)jOQ{Rp
zA#S`ZrOocXSYF+n1|p{)3rBa|-L+utLyyuC(^F!!0VH^;8~6ArUJ9+PeWz%qhtP6%
zxz;P^xDk857V|;XY2pDWsvOfSxDGur(W*y~Km)${o;ly$>(<~36&}&!3#o@MedkKD
zy!9y&`0sJ&UN#K-#c+WrrmG8iQ_}1)ciI(62esUrhY#<Qm!>z*=C`CDnas9`p!Kr@
zhNfzj*3x7kJnzcQZ~ETU`Il_z7qgAX=*RL*a_t!U*6_=A%T|k<o4K3h%crG#4OChi
z)z@3%6MLQR3(H;NU~)_EP7F$4u3qyES1%9en_1_Z_qQLi)hO|lH0~vd4Qh3->PzpH
zH|@L5Qd#lqi=&mg38F&;=S|w)HkL|5kVc=~3sr_z?Cc_m5pq<bUM{I+l%4i=b_sP@
z!V9&;oP!+82KF!KR?zEA{mzMMk6)fW*oUq&F{`PD+pM(}E-Js@N}3GsgD<Um*k*hb
z_U~Ry4|7=DyE1uMz=uXQU4OaFpYcx{&HHlJblhIwjI7PcY;CN_xHn!dCDN%?)=myt
zSbxvBHD9*C4)%HW7{s#1LEKAJjxfZMQO=6Sy)WyaNXCFxs^n3?-V?vY_!xwC79pu?
zwz5qmwP`u9<M28@HUmqo*>=%ByiItPA^|*wzwx<-&f>yyXT`d`R!~dyeB=Ykw1+}G
z9K>MPd3m5@oKjR64L^{lvsBdj@ZJh7p?)c<j`f`%qXFEX!*$4Z4}YQ{F$Nn(RVTe$
zHyiVE<!&&8+Nx`jh`T@lpf7Ev;G`a7o+v>Uc%r}!&p&H1F~3K9TpEX5j~7rEgFO1*
zPIQ=OZ=AG>&4xhp9UJQrI-&y`t|}-{4vKvr<u?_=%0FQ<=&rmB+-y|raU&PAI{y&)
zXCpge8U|w-*XXP$Q|4;3R!6$#Iy)tRL!%bUeWoAbOfW;^&zXf0{*q40AZWfRz;KIJ
zazHcj&_F`dD|N))NsO+r6^?4YZvQ@l@Z^W6BX+RH=K|d&g6A`-O$+vN?K4S(0gLm;
zBOPRq`_L4&B;H@w4;{tt2+H42CQr=&#PtBAF#%QOrY>S@DVo60rvQT?)dZk&KDd`(
z{itnWHs<zf42mUvo{bw_HWxmlSiu-DC*>zJ-xGVDw!_@k7*0NbGiyZ*u*HJu&)3ZM
z7+UUJSF`PGF~8CMPOc1p?r_v-v|pTH6W=+CUY6&AAaO32&c<+63ESQ*2WO2a-Oik%
zOb)*t@y{ix7It^wXuawWVl`6kMwQ!YSy9kv#_IdjLylhFe8S7<MdD%MjqdGsg8pN7
zTHj%O*nx(bO-@iJiW|9O>-v2hLJ`(H52hPhMM(iUJJa($yd20PfeiuW<N3T)s>HmU
z!;RezI`_tH;5zX*dayJ4ZnUM`kR{hq+?Z-=TIyx|0=4xQJc*r%MGsGdUk*b_1APM`
zo=G_`&An4V9T2QBWpew`I2<p6u`<#lRmB?2-1ixIZVTZCUGj<;6uQmihydVhGy_(~
zOv*={u3}xt+u4ILT_--QbWIcKY|0&|5G)~I9Cc&<luC$Fg7Va3Wu#L<!D_o3L^sCS
zA)1$Q#j*^F0nCh?mKj;Z5KTg%=9jEalBs0Vn{m#L7%~;ZP@;B1MzM@!&G7-j0A%j5
z{rYDb^&bqT|C<{1-z4Ce{vnq4Kib*<PMH3yT>MWGa7_Pls{bBg`d{qS{~dbqZ-uFo
zil(iWFpSTRE<@}ILH5|Hqi^;6JdpsQdNR?VP#Eh{ffj*!!28Xc)r>e>FonXiSIbE2
zow1HJ8@cUj{DzKon3ovc?o5xwla?0k*vMfETjnmWwM-8W`OBF;vKK^i`xR-~hA(Tc
z%+8EtHv7-(-NEO^bLZ5>71#*y0sEVh)@{}%lGk4lyP;*RvNbLxe1%)D8?I?&!=h`T
z+Il$=({h>)9IhM5j$FXbl$^+E`}1nhBk&-(9Q~qu0AZIXlycDhdY$I&2rax5+NX=K
z)~Q@lUpr=xLYu^miunG9?b=BeMXHaf0U_h^+4l?!v9=<o+Rp+}bQjKhEtq#KR3#d8
z!dbH?alCIyUqh}df!YjWf(fD=Ibl^@4dR~+Ya&dkDuBtDN+r!h38(-hgr3AdiQ<L)
zQ5Gghh3m!0yHw$IJ`RsKF2pv0h}IYu7^jIYXkdJz1Udw0NDU-(EtDaT8`dJPz{`T9
z7V&4cvkxMXXxr;X9RjcvMX-k0<LL;JZ1Vv@6pTMkYuy|Jy6uRw33}Z7Da!##u&T%k
z?eAuUD1q2<>vX$-5!k)PJ4JM*v3?qda)@tA%4RCQ5;JjXC=PWAAtL`j{exdEt6J2f
zUh^NIfa0KpChfY<xV?T+%v4HbsIZwuGU^Zl2^9$Ij0tlvB511$8bg#&`60|r@qGzW
z?v~?INvbDy2ti5}_m&EGt5;5E6+8t<(p`fEAnnBd0!zXT3+m28{6d`REH-Eq4YgsY
z!VgiI$-q4-Zq>;W3=%@BrztuWJ<P0viv5i;^T$M+THM#_NGlumks`TFJmf`YAkw`l
zoCs1pSZrpIttNl#!qAuLTc$^BQB*Lkd0XM>3l;qH%hF}xbavK!PUVLH76`?C5lVo|
zqflJLx~C#7+tV6@1cMZB!VY=hzeY-a6=(u_iV1N)Rd5v5c*Q4n!U7WsmPZW=aa(GS
zhcUV=SC9mji})8G5>_w&DmG+1APF-@2`iiga>TWNP61_O$@aRS+G2?*8d}RJ{cRYc
zJiiRr6w?=Ai7Xh-xhTQtgC8eGE^vO}MJJ)hUi_<qoeg<}01e}Ulac9i)NIejOTm!x
z#n9fXW?$Y8v%{Gxnb9b7e7Vbm2nM0!7&NMcdLRL;L3(i3-AQazf<XFR4OF2=Lwjai
zo$8Z(qv-;eA8Qg1;GHGKX)uGj#lpA{x7x=`U+w&xFSEXS|M7jGGu>`%;qBG?Cy-%N
z^TV5s-Yojei_0+G-}^bT2mROM<yk)dK%ET;3$zdgc3P4)eWH}L%?Xq;I#UDd7cafV
zjmG4ClVe?AH47>qJuHZ;2OA09&$1!gL%<R56+!58rcJUNK*lEKw;`ug=Sa7?Cx#$!
zO~&P<#n}~=m)hG4Q-#NS6`;>oMEt(9uu7qD8(3(RhFvK-_-n}VAA^i(m)ORpr$b?9
z6Rkt14$n3v(FLd8pNG0oWt)ZS&dzy&Sy+e|(&rJvmfXPC*4|F#)Epf(=!z;sQ#u6`
zHO`HNJt*(Hh{?)Xv?biqm(<W;W&0dKvD?b=2O~knJ#0y|9oy#@c<^L_jBD4G&PaOz
zNK{o9-EP!CUX~})mO%<-OL#`Sr?@MIQme3<OPFMO2jkh+ROi~1hj+BWGOuq1kWRgp
z-4kIK(667>A2<N`3lXq?cD4KiUi|;h)$$K1kAHr({Le`m{~`1IALBLt8v+%~|HZ)+
zOn+xT{Tt>P^*2y~-Hz(>QoDOlRz@ZS$3cScI>!}P@OMS3e;#}UPs<W#f=W!H$B+Dv
zaj#<`^F0<N(BQip+{{=1+ui&57Jk>m_4{?j<AU0jpYJ{O+akJdCAA@bKS0imYG7xt
z$IA%(_7<Nu>=%NA(+V4V_qWSa{ltw5;frFb>QC1<^dVUMg*V^t6zX20L+Qi`#mkXV
z!4G{3V#xQ^Zr$oqUT4BD>t;A1J{P{P!FeBFZx&;UL6)77F<9>~8=gmwwgWF`(ZOGs
z3^G+_;=@}32dy<wS5MMy6*$i4mC*V0HdiA(R9~icR@sn{JVZz$344Y&<oj<Uwwu#H
z=oEIO&-F&CLO1p&56YBZa@~8P1@QVt`uRwB?--w$I-9;hh{ex6ZCHpaF#a6Rl#nEx
zdVX9H{$1!vT6iBwJpM`%o$Wv}>7>PSVOV?ca#ith<jrCmhvDeYi}7_cYk<X*i~3SQ
zYDW->$an8OP%&bJeW#F70jGEdDHV1y#BVBIBpLz9{0oB+%|d2DIwrVdtA2K}zj28{
z-g@EygP`&uy8E%I^&>C|5x|WY8rAL{P8F3k6XixO*Mj;N5!5f0sPgqE`!g+F!h9j6
zXyZVV5cLQ3@|u(f8O6J}wSe&s{`SJ71P@P#`q;qjY4eZlT+fLm&f*z90q~F~WfwUB
z011iXFyAOgm&A(MpMZrC%m#-RSIU10$^#{11iO+vDCUMzBp~HeHf;W4fDP=Eq6#98
z@%Pf(uD_omY}`ad9qt0A#-&89uN4mCWg?RG2dgPqMVCj0LN~<}74Vls3lz*R%NwIW
zkHDuafFznr!}P_grJ!9PX_G6=Y6X3PL<0HIJUQAtL6OM@?WCsR9Z~uVLFbM2KsI`i
z7*u<-phENDqNqrEw2X~RDVVvy&l|%dAx9rhg`#7Fni7Ah1I?^~^y)3jA>~I+0!9Px
z3o-d~F*`Z~#g_5sK^jB;4n2fZh7{!fy+=Fb*yTlP0h^V~4iORM0MoBYPFd)0U8V-8
zWSb)|o<7S=x;J$Q3nPr109yu_hp@ICBmkAvP!~hN-A5z=Oqx_=YLC)1|4~-_OX+&<
z&&4Jdf@J?GwxB?n86r#}RPo|W{rGML1c+Uq8R233N4XrtpCYP*0Qbn#aD-8%Wh6zO
z1L^Hbtr-t8#K=EVdPvLR>Wxx#jH%@)YFLfwp`0UOA!P6k`Cxm|>?MMaml_fZ$z@r_
z@d|6-Tgw~l^P3UKB1?zMWrUCQRr&ZcXzn3a>WBA|bl{u!e^b{B%fZ>J9hU2dqX6`G
ze6>I{H!fX1imv2#wYP2k8krq4l`ICc){l>ozpSGzTl-69vO6`aCGk5<{XJGlY;#q*
zcJWbW`kgCX1#~`U+hqexk36)Z)xfq~{=OEjH-aRPY(KJWhq^27kTt+oZ6-R*P3OIw
zhN^6f1bg`SYZ^vZE*2qE9aj;*mFhy#@i+JGfDTF<Uo|(GPvkS3zinGN>$l2{k6Lhf
zr%v@qzGrVTMYyHO*!CxSAR405%aVMuSNwE!*uvjE#yO91-z&d;b7sV4YBQNj=h3A?
zNoTIJ$l8}Lt?^qe4kOp?TSpr>D%It-|IYqBzs|``flTxmob982cHM*q7Fj$~j`Rqo
za6yFU8oV*(am$HzYNWc1V?c7C@wD!rqxb12U_ia!F3xppj41fR)r5SI3qFA0z{sFM
z)yWByhL#V02=V2EI7ta0!{y#xyuJd(E9bY%=1lW&c@RExk$!U_vT8l)6<zQU1w0&Q
z=i9o}At3#`ZL%p)XieIjcso+nWYDYT@5X9|HS!U7scnebbe@~bmBjSC;cBr&pkzwK
zjMR8LQKpNWF?dN(q?46p4DB`P5b^G2?9gc3a>QYdT++3)-tgezhEdB2jDggl?gOiB
zzDSN(s=W!}B`p#oTS3ij9pMLO+UFDk8$9kmf@QTCp*|wqR_zTxQ2K80c588{n_2$R
zgEA(rXE)K#t2Iv<Oc|_8JT&mA2YN#8FU_@EUK@YO%iW2<QB0w#NTVfVC$|gx#?x8w
zQ<BWm?;0_$LMQMPj{ZTtHPZX&d&!k1!)wgiM1!P)L|g>1HUSj=xZn}H6wQ4^*pIR$
z0is-`g-J+)=j^&2olTbrwvsQ<c!_LW{KZB0R_6XwPsJO!Owti64`Dwhk;dC^0SFUw
z#|NA8J>cjM{!Ge!{e|uoh+IJpx76_4ug|iR5}nfmiT!q6utP>RS+9KbLO#E+6VfBc
z*&Hs&=1kW}qn_jgZO6rkLn1+2r2#L?_+MZwS|VXE2tQPJ(-ODpr@0!!P&+DA56R7&
zNp81=yTz1m_NlTw9A_<S98x6=_DW5@zXukm;JP%xD2@_+<7+IuQV^#am~nYefO<&i
zSF~zMOOU&rWEI)xh?buw?HW5*bQ?d0nF=km8aA1RzZxegH{_g#VTQd24kXzmlPm~q
zlnAGyz&Tj2$&Xw@O;MlE<i*MTjZRC>kleF^7B|;85+A+No-WNqIZJmn6<gQVF!Aod
zzsxh(rb3Z>=PqlR9$fZkv)7x^-I64xc3M9OV8h%Wl#|nqP>ucF_u13F(Ho^=qR;Hw
zU~+{IT8x1V0e57x$v_kdWlT~yWUhP|6%^mx2<4FsV{kJiCkC?_tzxciukO$l-=4mX
zgpxA6Tc!qu@i!FXIK`Idtei2TMzDZ|aG~#`hx4{^oG`6(W}w@ZJJu|}KO5#{5yMMC
zhPJX@m*#j{3mh|#-z7wM-0ftyjDzbhb5-ou%S-y9F6wsFJzU5R1oza#CCY23k5|hD
ztDH_6@i?0Znp}EWW_lZVY#%>@A!&bIHlkH7)!aF(o<RQuJ^kQ`JoqZD?y=Kjm0&(z
zG3L^YgOt6Y=QmvQKs?pmn*2N|S3JAcX41?bTz7jkUq&w@KDc^FZp`(hQ|Tz#dNXPB
zo*lj|OUmkX8{yvx20Bu{C5CN!2=axyaqdR*ToA##><=oXIns|sPdG@f7oze+ta;RO
zlN$gcjmR-0`HzV>aesKg1U^T=&aG}uE8v!ALwxO&+;yE=k+o`c*&TLAFizMgg@tX-
zPz`P#0YOGbnnoMjC8*;zc|C^5VK)l@ZtxShD7~cuA8N%R8T$ioRd-dq{!O>pbW<Fp
zbvF_m?<#RT!+KFk<s-F@RtTe@m4WL^f_g>k@r@T#vPa-*5{!~xUp`dXit2N&6TVh4
zCt4bj@(%wH{mtl((^>yfF*1HLiRMvt5WZsNzMlpbVa^$QHges2$uJ*_p6(!8eH<Rq
z2Vc!#-J@i|{U%~5t)98_n~9nf%w$m}iW?GfBbS2N@+F%)g0s`}XLf$v-zvO;ehLk#
zJ=A;?CTS>wgK<&!?5^nPNZ{~&UrmgQ1a|O3R?wkIgDa~C$FxhH-lfs{kVlNmcxU|M
zi8;#2JM!dZyqFV(2fr=r6*)0=XYp@ua&+LhXxAt<sh<;oTxxV;W>%r<&!zAuu;pH8
z&&pFe$+b=ab>qmzJWPgx&##GkP3laK$3ls$)Yeh?OqL*J!gitDoHE2tw@>^d<+_Dm
zFhVyU5jvh}YMdQ3qRb2!$mk&W2+NG@vogkJ2D-6^e5UHuBrcX2sV`O|;n|xY&%~Jp
zcEyC7{ecyCs6Ae<U)zdiUjI*XPXZR>_I_?ka&OkFM0`@()a*;h(xyR+X%j`$G}WYL
zy3@2!B9SgaiAZjUOIZ>sQI~WhOOyyDh3wfSOS=E}d^3$%`f>ly^ZP%~zo+l{<~!dx
z?{?nvp7)$N^S&*|HRfC~W34Z(8X0-9WP#q(&}lhpt8^z_PB{G`_Xvl=T6W<)KOx=Q
zNa!)w*VvSq_eaW_h#UGh+g+U7sk76buTC9*+2-f)?Jr9EEn0cZGu3jJ_u}eQTa5#H
z<Of3{&kV{fNsr&y_GFl+N!(9=kA8n$r`62q>tm|f^}{LsQ}+2kS$WZ|<J@h#DY@~w
zOIG)NoJDU)*b?@~Hc{=>bI}bugA>{!YK$Fb8M%&Hv**2o@fd8V&LOQPtn>Vm-(F?a
zJC8jyt?eMwKrqcfbjg1}`(j_ec^Q6}=bvPiEdOFKrSWjLZqogwdkpQO-fncQJJrw0
zIQrR<w0mmZb?>^WyPxD+X%^3!7Z6)l!7tplGui0c?Io=-d%F`1Pv{=WYu?&W)4uEU
zt%STA6*=vimplqzddw)PjeO~6xptlQg{J*G;~HJsTSG0^?$NM0GRpIrx{Y<}FI5Rw
z{mOP}rik|tMCpVr!VXOIW%B1={nbX)`v1|(3XLka&-VXjg+`S-HPh<~4PQ5XXY&u|
z>c6u2NBx&Sf2CT>FVJGMYdlKVHxUQD`1Gs0xr3gL*#fgjtVs7K_N1c?F8-{-^5x5>
zj!GAaN8I)c8@#_Z<o%-ripii+(`z@iL|t-euS`n%x+;7{%1kq2qv3I%;%k*@BQgTa
zhd!#-X`du+@2j^%r{Lr&SI>yG+DF=UuY8uaH&!boEw>N1Z|2^_e4azc;m=j0Zj#mV
z4J>rthnIHTJ$3Li%e;zY*H^dVco3W^_Nevp_VQgmEoB&S_x*+AX4wuu72b8A^nz7R
z`m6%Gtp^*e)EB1DymdO?u6`rie8JtLb?2<L#|4ac-FUFfm(@m`)%LJxW0hK09o3+H
ziS43_7jAbp4@+SCmP~lbd=XkFjH$75v@-5YDmc%}y)wA6X1~Q!(bV{2>t(qD$1$vq
zq7}{oSslaIT~FRR{Na#}R6p)EqI&(1)uaF7-78x*xYMYyHfo$fj3JvK{xy8G-*4sT
z4zsQ{yJ;-k(rr9^xMS<fO^=GMXT1${IYukVX_>HHL-)h6r9Mv`%6-=-JT2XErTqBl
z;{@ZH9f3)<cY<uv$361YJ@<5)-3v?a@djJ}2@Sg1)LC?B{)a8T8Rs76?&OK0lf`cQ
zPR*uAEkhS39{f3Wuj{2nME=Z{nyv4%xeM&pr3(J8o^&0IWAvM4oqj{@ET&#+)=KPr
zHEGP7sLF0NqowPNR0Gpe<u*TT`Qk`7p2(dO9udaFm=HXZA13CBFoI(k1go^?p<uJx
zgxNenus8$)Y{L5}0awfy3UKu&LZnds5+1~ErqLntrM)nm!xx}<m?U^&a|FTg3V(nt
zbZPwG*le!9-fcCtKJecQX>vd0_`fI362gb#5mRNfEeb)j*`Hb78*Osi?UKPS7v0%*
z28N3j#<mM593nrnL6(Y<o?YFXF$k^fX~)K>(!*=2!Jnyedq8X^MwRUNfcT`rp=tl}
zFdCUiqA7=QwUgVaiOt^O8Rr3~({jdgf*Jw_9ZOqM8|V@L+O##voLy&2oK`ujO8dEm
zk)59Ncs?2XIMIB~4U15ly|ZqI4qE8+{J`j_n4%SIzZYw!9oTYx$gt~G4Ux~RiesLv
zIu<uHzhPNt_NNDTU!7{{{IcM*(8>1YjEzPkGPZ5c+_qUS?X1rl>okUb*;y^Kl^Kqo
zSh+mY!8<-jH5WYX&h7uzWJB`IXKK5nua7ZI?p&qGDo;$0yR~z>_R%eqr*~7$g72Q<
z3?7`uqQ~VW!H*Ez+fJNd(obi6b*>DxHW3cL)&Ha0WuLHU3zL*N?eXimRkrIbTP;Uz
z&)Bwkd)6+l$y2guu7OE}PSUCx^NS^~9lfrOw63_Ys!)U8Z_$XdBaYks?>pQb&&<75
zvg2T4RHOB{4XG!Fj0^5GH}skG_{duqlPSl_Hqj>iyrO#B+`4mbSJbfs-=5_zPIMmR
zbE-1A!|Pzh;iF+Lb$s#b=(MU7pT^Q8(wbG8b!(ru6=oIv+L}3jdtvqVngKgPS~W~8
zM8>;yO>(%-W%UA5Mu2bo#h0y1#}2bzT+ubeCOs-5D5)~=UiOsJck|0GZ}{rhpn0m9
z{p?uLrv>F_9y^!>o26WAJ@m=JCHk*E+n?TEoLyQS5K(3re|zsg1;W15%dGUm|1_Gk
z&oW}`j#Y-I{Wn+n*97MV4Y41;%lK$YpkYS!_(ww?^fw^oIE@`XD9>Ie&GGLcYg5FA
zY1LS|R=SpvZAx0~dM#^uqw}5dCTWu{jQJ`~nBS$}r5X6}=(0;Dm%OVj+Hx-1ybbPt
z*gbGRBadmGdf&g?Hngu5|L!5%n-R5t)b@{AvSM>i5sQ}Jo#hgn>~;6!-n<tH??&V<
zNbP=}Hut2(A^wVaBPavf=4Bd@n~&QrSs0dS*u<(e-sE+5U;ZIoMtpJpmH6okGqv=n
z<Ml6)`Ulwr-kYoUzS-d8`I$B1(B}6KH7)&j>)uJM^nY#KnOhwB>G#e0qb@}*JW@DI
zbKp!9kC6Krg-&aaH*-09*&knz$X0jX*RflxW_{lq5B}^+{YfL}>YDXgH+42ge9U|~
zI%jCfu$RgGtqO89H_SGFek?y|r@9B{LD#qo%>8rR2mOA3j!4(=-d5pX%=iZdS*0cX
z<MYV-M<<Nfu%foM{bOF;h!#5y58p4{X^wT?ShSPtM5o$u&j(~KpSiq#cXNoomb%bK
zM0VeF`GK1LPi|)})Ov-xe_(tVqn14&;qz}(FLMm{AH9>>HLoIT+m)+lZ#~Ezt6uLP
z#MpCh>w(N!;WKEf4Q_1NAkrJf9O6s7FtW>^U=^)lk>hK-B7f-U-B%v^Mii@QCQn{&
zv~G3d+$XE4`VZYLx0YPXxDr3ZBFD%rqG&-!!LrMLo0V-LQG!B0_~~h>7u<O<dIB6Z
zPpofb<qbLPop@^gm4dI?r^mDmO3uxCttqG<MSWbS#~iE~I}h_rYBIXw7v|DuK*crn
z;>ZK*1yfFzC+3CBd9hg3alqw_IDYTiX3gU8mPeKYpKLrFcWGSevossMJ{#t^4g9)G
z|L}?`C!HIneo5=+*r<;+e>ySSuCi8GIY;x_RUNxs`Wgq%tEY?`Q0h>;IPmqj$#L})
z_dhsXzVAbO-=@yI`A^gRMn)ghoP9Q(7fE$bj|%^~*5=xMt9gB1aW4(={?z(J)1siL
zn_kk79}(QLsy=G<2ZOHGi#m@+A6l0;w`B48<c*^?o__0kOpn(v@OZ(UaN?6sXZ%7k
zS)^MD^zajZ?YGj<<+TO=y>sQQ#<pXnSywY@<uN0uNv91y#ZkEX5~J(i2JEUnS|%Rc
zs<zPVrDdMgmlI`wEZ+1vf*m*f=e~l7cddn#eOJ91>Uz~qe5yIi+a@eKb;TUFEA4rt
z0rBchZ3#OUSM1EUI?;cVsWW?j@jo+SG=8Zfncls&`uq-31;;D(RNKXqjR9v;FJGFU
zb|T|I<HCar7MAZl*=0o8+_);aIIyxVcJhK(WpA#Rx3`~2%KEtU<Y}!h6&KPTUu`J4
zGkNTU{cclDPHh-D`f`-d$Uo05zmc@<<-<?+Dz`VByxz~td*ZY{l<H2w*N1O}gkM`O
zxL4+$xZiQ#(yVM%mp&tOpq1BzpLZnM7M(1BoY?pJKmR53KtSi<sFCIOzIHU-R6AEz
z_;!!x?k~4$6BBc$jMSMJ+^SKpU0L{MUAO+gy=6CpH@l8$Vwo9f`7Rar>(A({ZY3-o
zYd*K3u0_8eW8lj7Zg)q#`;e7kwSM^=cIrPPub=3yb~C%SY%;BIYI@b`5N*c~H$P7O
z^N*QzQ#)sT`9l1X{@b5B$a=rO%bw!jah7_2SU|jG!P!&y>IdXIHx;iCozYs9Kak%_
zJ2|6MgI&|0yG{Fs%NNJz#WCAlLa$DBy;0gH^6@%LZ+H8ov-gYgcp=q|*A7|S3}#MP
zo4Ee>uq$1qrG+1^d3N+0FwmNi=sL}_>YmM3AGdu!6(7B!lUCAJa6x^xzIRLPr?#|y
zo>?!azG{xzvu4iw<^-O4Q~AOpZ$G{>zBAoIm=O1A-ldKQzH9V<iPgCKylCj39<Mz0
zou^*mYt5n$3x1eq>71-S@r)@qy&}DH%d>4w?=7C!s*gMwm>F+*I&#yL9d)L6&W_7X
zNGZ+I8XAx@HtL#T+!mJl^AKjA8~c}Ndb2(sIMDYWDls^YRcn#-F3$78xeoS}K4AtK
zhx9U7G*QmXgPTKriOqWp_TI63S^ns*!Jvp&mCJYaeKYmUT!$!C&kE(Z=m|A0@m^36
zb$ebUSHzDH3q|lVTuy`&j~^T&#u!xaQ|3w^XcTMk`ocKDkr)O1KWBbqBxD)z<_Cg9
zNM?YSgJ7UA>6T<BxEyvN91#lGZc2zmk>CjtJP}_QNZ>+jcmctVU{CNMa0meeE+LS>
zBLoqG2_XbNA&d}C5D<if2!e<ZNe~la%m5{jXN!kXw<IyBICKaMPb6X1G{}`ea2NB!
zy`X?9sR?c?kAmUe5x8K}B@{tT$y<p_=IS%g)y>vIF6{+N%n9Rjrwf9?_mz*!PLuok
z>zl9u7GD%8MjS$IoWO7L!*Bru?r-@uRPiaN*^s)5Bp`D(M+%ut11aL-h13ufI8E}u
zy`WPt3XS+*xezP~JQ_x$(eaDPw8rRk21c?beWMM^XpjvCuM0HywCic}qr0p=z(8>D
z3-FP^jm426gbWBCg)a1&4srh(Kpc8TjcG(8UXBnkfdITNl;iEB^<?d&Fs!Lm8Egcv
zhX{11(t#m>g@i979&q%0#&Jpog6D(*n1}}S8R74#*K^0=p!bMY)DAu)8qvMyqQKE0
zG95Y&?nnUgorvI~b_foPf^US#3J`a)2l=MxvxG#s{(>?D4hJP`g$O|pNH9GR5LiSs
zD(_*Y=Z=W&A&Nl(^b9Foh<K=vm%*J*1cq^jfC3m>GFZ^22R2?#muMLigx_<aj=?()
zb-L1pQ!mp9xt9p2{Do@+ND$W;cqe~Hg!O2WtRB>*)9I262<Ty0`HqGH-g{C_=y@-X
z8-4C6@AVG&5tAzK@J<GS5Q*|xJ)q-ccAO1aU~p3<pOAwlcWTa7C<=tdJf5Heph(k+
zOcw}*kO+v)<3e5yG701gks2u0Fsi9&-7Ygyv-yHWU`tVg4tI>;$!5XgmCeFTL&V~U
zi3CDSOpH|^N6d)~;qk;=_z)%xw&DuI&CoLQ+lm!*Nk*{5mMR^X!*{a4aQ>%L4S-&@
z(1vj-IX(BCydb!QB-ul7PQi@gGGPO6in%%HkTHZ|jdFJMlAA+r3a}GK!Tg36^mvXW
zL_eh1nZ*wT(D-RS43CS)#!!+e3~u;2445wQCkjq7hVLE1(jTv)(4%sD9x$IkpGcq(
z=K9RTU__vv5k!TB0hv+}fwtjC2tD{>n7B+mI00}YSz#cQz$oa{+5AW`%%CoiECt3M
zUiVvn-~}k17Rc32#EXW^B@$>VxG6Af>A=f(kvsB(qeK$y9PT0{85w3IL3z!j%ZU`n
zETs*35J(eoO0gccX^bDREyYZ>!e$GD`CQDN&j}WBK>ehQ<I<N?M7o>@Btb7Buy^#x
z2!EGxiPQnRJ3m;!3B%A_{*8A@dL}uk%kA4pkW0wx1vwHs1N8j6*rm)<0KF>{;|KyV
zFMCHf7YtI^2w+^p2HiJWaCMRw1S*i%0J?<Q|3C{By6NB0LPfMdww>NckVJx!6NlXH
zwL}~eB6~<s90C7U8Z;}+HcZG}q@oIv@gj#F6(~qR8mdOBiIVZ#qlrI6FHr^P3zh(O
z5@7^__%U#TWvZyWiw9Gc5`O83?iD{3`sceHAi<C14;hA{A~7~E7%Tu7en+7woC9Qh
z;~X~~QqCo24ZM4mkq=gf4u(nzsZ>U@!BfR>4!~$jO^~C*bPrFqgFEK#>Fhk6?E{?S
zzOu}?;I@dSA_uvhXbBNgn<*1LNyP|AVDuoCunryXie@^Lv5qAO!nwx#fE&UK=PB?n
zCwU3~u++gdu*azOP6uqneoq>>!pNlIHl6K(xp+F;I<Q$TGi0)$OKVAFA$j=LGvM>c
zbV5o4t`stZ$WWDqB3g+o=vJ7$kQ)__mSk+m!4-)F;RO016fIVe1Zu3H2{K7YMcg|T
zKahlUGLh;9+rf+F&T@6ZoLKH2u5x;Tb1OeN(Bv$Fv}0gthwB<m%BEDKlm|07oiauw
z6SSSg8PO)VMv24t0?62fLq`iku1JUm1tzt4_*CAL;0rxCqvU!7&q!WRQ@OFjkek2k
zL_7`}=JqJ1m#O_kGLc9pf-eOwDUC$5Ad*dpL=)(F$&?I3(UgyJmtg^mu`po_Cz#Je
zt`g>JDuQH{<bX*LBr?<23>p9dKY;m7Wnx9VAZ@gc(1sO(^bb4+8ij@hVUjW`i2`ba
zzrzI5GRf1A%Sbdj6Xb;c<lCa$Y6@i}8jT3EnPM5m8hl!%GAfaw3=h(U0=3HZC`6b5
z6yZSvQq_7)72ZfxDno@9Dg${MO7N`7pyrBYG%9eaTt-CMO_l0VkcX#GCV5gUBa=ud
z`J6&M5>1t6$a;#*sX{%;lVTZ}3R<RA4>Fn}-BxHzrh*PCmGugbK><Ur+?GO7<`*I;
zqnxM;IC_IeA(2${fXtw&^d*G|8#Dg~9w1hx1r8je@7NV+p^#}zWx4c9ADyhCFVK_7
zEGxpJ6Om0(D3d%XmQf)MuCiPxbP6(83T-J2iYm<v=q2TPbZb?98AMngD#D|J{8VsQ
zGr(U~tVgk?!rD`*4A$hzvIlsum7`dXN<mu&N@bvG%6dvAGf^s1^e3|sR0>gr7OEsK
zuwp$DvQ$cKNpw{lB!;RCNY;=mSg9?Uh`v}=#6c#h=mwY^l&V;%9#xeVG98v)%Jo#o
zD#%I|2Zh3v<4r8$zy_rVt+`nC*!;<4D(q!&c$A<33Y8W>=F+JF3>uHbV33%cz(5Xj
z%8zT{t5zXw)`A+L-;?2A#KTlTKn@Uw&sF&R8Y$+8#Q01B98!qd#>Nh=j@thNcy6ny
literal 0
HcmV?d00001
diff --git a/china_devel_board/stm32loader.py b/china_devel_board/stm32loader.py
new file mode 100755
index 0000000..2347ccf
--- /dev/null
+++ b/china_devel_board/stm32loader.py
@@ -0,0 +1,436 @@
+#!/usr/bin/env python
+
+# -*- coding: utf-8 -*-
+# vim: sw=4:ts=4:si:et:enc=utf-8
+
+# Author: Ivan A-R <ivan@tuxotronic.org>
+# Project page: http://tuxotronic.org/wiki/projects/stm32loader
+#
+# This file is part of stm32loader.
+#
+# stm32loader is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 3, or (at your option) any later
+# version.
+#
+# stm32loader is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with stm32loader; see the file COPYING3. If not see
+# <http://www.gnu.org/licenses/>.
+
+import sys, getopt
+import serial
+import time
+
+try:
+ from progressbar import *
+ usepbar = 1
+except:
+ usepbar = 0
+
+# Verbose level
+QUIET = 20
+
+def mdebug(level, message):
+ if(QUIET >= level):
+ print >> sys.stderr , message
+
+
+class CmdException(Exception):
+ pass
+
+class CommandInterface:
+ def open(self, aport='/dev/tty.usbserial-FTD3TMCH', abaudrate=115200) :
+ self.sp = serial.Serial(
+ port=aport,
+ baudrate=abaudrate, # baudrate
+ bytesize=8, # number of databits
+ parity=serial.PARITY_EVEN,
+ stopbits=1,
+ xonxoff=0, # enable software flow control
+ rtscts=0, # disable RTS/CTS flow control
+ timeout=5 # set a timeout value, None for waiting forever
+ )
+
+
+ def _wait_for_ask(self, info = ""):
+ # wait for ask
+ try:
+ ask = ord(self.sp.read())
+ except:
+ raise CmdException("Can't read port or timeout")
+ else:
+ if ask == 0x79:
+ # ACK
+ return 1
+ else:
+ if ask == 0x1F:
+ # NACK
+ raise CmdException("NACK "+info)
+ else:
+ # Unknow responce
+ raise CmdException("Unknow response. "+info+": "+hex(ask))
+
+
+ def reset(self):
+ self.sp.setDTR(0)
+ time.sleep(0.1)
+ self.sp.setDTR(1)
+ time.sleep(0.5)
+
+ def initChip(self):
+ # Set boot
+ self.sp.setRTS(0)
+ self.reset()
+
+ self.sp.write("\x7F") # Syncro
+ return self._wait_for_ask("Syncro")
+
+ def releaseChip(self):
+ self.sp.setRTS(1)
+ self.reset()
+
+ def cmdGeneric(self, cmd):
+ self.sp.write(chr(cmd))
+ self.sp.write(chr(cmd ^ 0xFF)) # Control byte
+ return self._wait_for_ask(hex(cmd))
+
+ def cmdGet(self):
+ if self.cmdGeneric(0x00):
+ mdebug(10, "*** Get command");
+ len = ord(self.sp.read())
+ version = ord(self.sp.read())
+ mdebug(10, " Bootloader version: "+hex(version))
+ dat = map(lambda c: hex(ord(c)), self.sp.read(len))
+ mdebug(10, " Available commands: "+str(dat))
+ self._wait_for_ask("0x00 end")
+ return version
+ else:
+ raise CmdException("Get (0x00) failed")
+
+ def cmdGetVersion(self):
+ if self.cmdGeneric(0x01):
+ mdebug(10, "*** GetVersion command")
+ version = ord(self.sp.read())
+ self.sp.read(2)
+ self._wait_for_ask("0x01 end")
+ mdebug(10, " Bootloader version: "+hex(version))
+ return version
+ else:
+ raise CmdException("GetVersion (0x01) failed")
+
+ def cmdGetID(self):
+ if self.cmdGeneric(0x02):
+ mdebug(10, "*** GetID command")
+ len = ord(self.sp.read())
+ id = self.sp.read(len+1)
+ self._wait_for_ask("0x02 end")
+ return id
+ else:
+ raise CmdException("GetID (0x02) failed")
+
+
+ def _encode_addr(self, addr):
+ byte3 = (addr >> 0) & 0xFF
+ byte2 = (addr >> 8) & 0xFF
+ byte1 = (addr >> 16) & 0xFF
+ byte0 = (addr >> 24) & 0xFF
+ crc = byte0 ^ byte1 ^ byte2 ^ byte3
+ return (chr(byte0) + chr(byte1) + chr(byte2) + chr(byte3) + chr(crc))
+
+
+ def cmdReadMemory(self, addr, lng):
+ assert(lng <= 256)
+ if self.cmdGeneric(0x11):
+ mdebug(10, "*** ReadMemory command")
+ self.sp.write(self._encode_addr(addr))
+ self._wait_for_ask("0x11 address failed")
+ N = (lng - 1) & 0xFF
+ crc = N ^ 0xFF
+ self.sp.write(chr(N) + chr(crc))
+ self._wait_for_ask("0x11 length failed")
+ return map(lambda c: ord(c), self.sp.read(lng))
+ else:
+ raise CmdException("ReadMemory (0x11) failed")
+
+
+ def cmdGo(self, addr):
+ if self.cmdGeneric(0x21):
+ mdebug(10, "*** Go command")
+ self.sp.write(self._encode_addr(addr))
+ self._wait_for_ask("0x21 go failed")
+ else:
+ raise CmdException("Go (0x21) failed")
+
+
+ def cmdWriteMemory(self, addr, data):
+ assert(len(data) <= 256)
+ if self.cmdGeneric(0x31):
+ mdebug(10, "*** Write memory command")
+ self.sp.write(self._encode_addr(addr))
+ self._wait_for_ask("0x31 address failed")
+ #map(lambda c: hex(ord(c)), data)
+ lng = (len(data)-1) & 0xFF
+ mdebug(10, " %s bytes to write" % [lng+1]);
+ self.sp.write(chr(lng)) # len really
+ crc = 0xFF
+ for c in data:
+ crc = crc ^ c
+ self.sp.write(chr(c))
+ self.sp.write(chr(crc))
+ self._wait_for_ask("0x31 programming failed")
+ mdebug(10, " Write memory done")
+ else:
+ raise CmdException("Write memory (0x31) failed")
+
+
+ def cmdEraseMemory(self, sectors = None):
+ if self.cmdGeneric(0x43):
+ mdebug(10, "*** Erase memory command")
+ if sectors is None:
+ # Global erase
+ self.sp.write(chr(0xFF))
+ self.sp.write(chr(0x00))
+ else:
+ # Sectors erase
+ self.sp.write(chr((len(sectors)-1) & 0xFF))
+ crc = 0xFF
+ for c in sectors:
+ crc = crc ^ c
+ self.sp.write(chr(c))
+ self.sp.write(chr(crc))
+ self._wait_for_ask("0x43 erasing failed")
+ mdebug(10, " Erase memory done")
+ else:
+ raise CmdException("Erase memory (0x43) failed")
+
+ def cmdWriteProtect(self, sectors):
+ if self.cmdGeneric(0x63):
+ mdebug(10, "*** Write protect command")
+ self.sp.write(chr((len(sectors)-1) & 0xFF))
+ crc = 0xFF
+ for c in sectors:
+ crc = crc ^ c
+ self.sp.write(chr(c))
+ self.sp.write(chr(crc))
+ self._wait_for_ask("0x63 write protect failed")
+ mdebug(10, " Write protect done")
+ else:
+ raise CmdException("Write Protect memory (0x63) failed")
+
+ def cmdWriteUnprotect(self):
+ if self.cmdGeneric(0x73):
+ mdebug(10, "*** Write Unprotect command")
+ self._wait_for_ask("0x73 write unprotect failed")
+ self._wait_for_ask("0x73 write unprotect 2 failed")
+ mdebug(10, " Write Unprotect done")
+ else:
+ raise CmdException("Write Unprotect (0x73) failed")
+
+ def cmdReadoutProtect(self):
+ if self.cmdGeneric(0x82):
+ mdebug(10, "*** Readout protect command")
+ self._wait_for_ask("0x82 readout protect failed")
+ self._wait_for_ask("0x82 readout protect 2 failed")
+ mdebug(10, " Read protect done")
+ else:
+ raise CmdException("Readout protect (0x82) failed")
+
+ def cmdReadoutUnprotect(self):
+ if self.cmdGeneric(0x92):
+ mdebug(10, "*** Readout Unprotect command")
+ self._wait_for_ask("0x92 readout unprotect failed")
+ self._wait_for_ask("0x92 readout unprotect 2 failed")
+ mdebug(10, " Read Unprotect done")
+ else:
+ raise CmdException("Readout unprotect (0x92) failed")
+
+
+# Complex commands section
+
+ def readMemory(self, addr, lng):
+ data = []
+ if usepbar:
+ widgets = ['Reading: ', Percentage(),', ', ETA(), ' ', Bar()]
+ pbar = ProgressBar(widgets=widgets,maxval=lng, term_width=79).start()
+
+ while lng > 256:
+ if usepbar:
+ pbar.update(pbar.maxval-lng)
+ else:
+ mdebug(5, "Read %(len)d bytes at 0x%(addr)X" % {'addr': addr, 'len': 256})
+ data = data + self.cmdReadMemory(addr, 256)
+ addr = addr + 256
+ lng = lng - 256
+ if usepbar:
+ pbar.update(pbar.maxval-lng)
+ pbar.finish()
+ else:
+ mdebug(5, "Read %(len)d bytes at 0x%(addr)X" % {'addr': addr, 'len': 256})
+ data = data + self.cmdReadMemory(addr, lng)
+ return data
+
+ def writeMemory(self, addr, data):
+ lng = len(data)
+ if usepbar:
+ widgets = ['Writing: ', Percentage(),' ', ETA(), ' ', Bar()]
+ pbar = ProgressBar(widgets=widgets, maxval=lng, term_width=79).start()
+
+ offs = 0
+ while lng > 256:
+ if usepbar:
+ pbar.update(pbar.maxval-lng)
+ else:
+ mdebug(5, "Write %(len)d bytes at 0x%(addr)X" % {'addr': addr, 'len': 256})
+ self.cmdWriteMemory(addr, data[offs:offs+256])
+ offs = offs + 256
+ addr = addr + 256
+ lng = lng - 256
+ if usepbar:
+ pbar.update(pbar.maxval-lng)
+ pbar.finish()
+ else:
+ mdebug(5, "Write %(len)d bytes at 0x%(addr)X" % {'addr': addr, 'len': 256})
+ self.cmdWriteMemory(addr, data[offs:offs+lng] + ([0xFF] * (256-lng)) )
+
+
+
+
+ def __init__(self) :
+ pass
+
+
+def usage():
+ print """Usage: %s [-hqVewvr] [-l length] [-p port] [-b baud] [-a addr] [file.bin]
+ -h This help
+ -q Quiet
+ -V Verbose
+ -e Erase
+ -w Write
+ -v Verify
+ -r Read
+ -l length Length of read
+ -p port Serial port (default: /dev/tty.usbserial-ftCYPMYJ)
+ -b baud Baud speed (default: 115200)
+ -a addr Target address
+
+ ./stm32loader.py -e -w -v example/main.bin
+
+ """ % sys.argv[0]
+
+
+if __name__ == "__main__":
+
+ # Import Psyco if available
+ try:
+ import psyco
+ psyco.full()
+ print "Using Psyco..."
+ except ImportError:
+ pass
+
+ conf = {
+ 'port': '/dev/tty.usbserial-FTD3TMCH',
+ 'baud': 115200,
+ 'address': 0x08000000,
+ 'erase': 0,
+ 'write': 0,
+ 'verify': 0,
+ 'read': 0,
+ 'len': 1000,
+ 'fname':'',
+ }
+
+# http://www.python.org/doc/2.5.2/lib/module-getopt.html
+
+ try:
+ opts, args = getopt.getopt(sys.argv[1:], "hqVewvrp:b:a:l:")
+ except getopt.GetoptError, err:
+ # print help information and exit:
+ print str(err) # will print something like "option -a not recognized"
+ usage()
+ sys.exit(2)
+
+ QUIET = 5
+
+ for o, a in opts:
+ if o == '-V':
+ QUIET = 10
+ elif o == '-q':
+ QUIET = 0
+ elif o == '-h':
+ usage()
+ sys.exit(0)
+ elif o == '-e':
+ conf['erase'] = 1
+ elif o == '-w':
+ conf['write'] = 1
+ elif o == '-v':
+ conf['verify'] = 1
+ elif o == '-r':
+ conf['read'] = 1
+ elif o == '-p':
+ conf['port'] = a
+ elif o == '-b':
+ conf['baud'] = eval(a)
+ elif o == '-a':
+ conf['address'] = eval(a)
+ elif o == '-l':
+ conf['len'] = eval(a)
+# elif o == '-f':
+# conf['fname'] = a
+ else:
+ assert False, "unhandled option"
+
+ cmd = CommandInterface()
+ cmd.open(conf['port'], conf['baud'])
+ mdebug(10, "Open port %(port)s, baud %(baud)d" % {'port':conf['port'], 'baud':conf['baud']})
+ try:
+ try:
+ cmd.initChip()
+ except:
+ print "Can't init. Ensure that BOOT0 is enabled and reset device"
+
+ bootversion = cmd.cmdGet()
+ mdebug(0, "Bootloader version %X" % bootversion)
+ mdebug(0, "Chip id `%s'" % str(map(lambda c: hex(ord(c)), cmd.cmdGetID())))
+# cmd.cmdGetVersion()
+# cmd.cmdGetID()
+# cmd.cmdReadoutUnprotect()
+# cmd.cmdWriteUnprotect()
+# cmd.cmdWriteProtect([0, 1])
+
+ if (conf['write'] or conf['verify']):
+ #data = map(lambda c: ord(c), file(args[0]).read())
+ # line altered following comment in blog post 1 feb 2011
+ data = map(lambda c: ord(c), file(args[0], 'rb').read())
+ if conf['erase']:
+ cmd.cmdEraseMemory()
+
+ if conf['write']:
+ cmd.writeMemory(conf['address'], data)
+
+ if conf['verify']:
+ verify = cmd.readMemory(conf['address'], len(data))
+ if(data == verify):
+ print "Verification OK"
+ else:
+ print "Verification FAILED"
+ print str(len(data)) + ' vs ' + str(len(verify))
+ for i in xrange(0, len(data)):
+ if data[i] != verify[i]:
+ print hex(i) + ': ' + hex(data[i]) + ' vs ' + hex(verify[i])
+
+ if not conf['write'] and conf['read']:
+ rdata = cmd.readMemory(conf['address'], conf['len'])
+# file(conf['fname'], 'wb').write(rdata)
+ file(args[0], 'wb').write(''.join(map(chr,rdata)))
+
+# cmd.cmdGo(addr + 0x04)
+ finally:
+ cmd.releaseChip()
+
diff --git a/china_devel_board/test001/.cproject b/china_devel_board/test001/.cproject
new file mode 100644
index 0000000..8844ccf
--- /dev/null
+++ b/china_devel_board/test001/.cproject
@@ -0,0 +1,119 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+ <storageModule moduleId="org.eclipse.cdt.core.settings">
+ <cconfiguration id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.debug.129150122">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.debug.129150122" moduleId="org.eclipse.cdt.core.settings" name="Debug">
+ <externalSettings/>
+ <extensions>
+ <extension id="org.eclipse.cdt.core.GNU_ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.MakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.cross.arm.gnu.buildArtefactType.application" buildProperties="org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug,org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.cross.arm.gnu.buildArtefactType.application" description="" id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.debug.129150122" name="Debug" parent="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.debug">
+ <folderInfo id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.debug.129150122." name="/" resourcePath="">
+ <toolChain id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.toolchain.debug.351715846" name="ARM Linux GCC (Sourcery G++ Lite)" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.toolchain.debug">
+ <option id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.option.debugging.level.18918668" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.option.debugging.level" value="org.eclipse.cdt.cross.arm.gnu.base.option.debugging.level.max" valueType="enumerated"/>
+ <targetPlatform id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.platform.debug.885001500" isAbstract="false" name="Linux Platform" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.platform.debug"/>
+ <builder buildPath="${workspace_loc:/Template/Debug}" id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.builder.debug.258517105" managedBuildOn="true" name="ARM Sourcery Linux GNU Make builder.Debug" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.builder.debug"/>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.assembler.debug.414239005" name="ARM Sourcery Linux GCC Assembler" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.assembler.debug">
+ <inputType id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.assembler.base.input.1585398458" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.assembler.base.input"/>
+ </tool>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.c.compiler.debug.356872829" name="ARM Sourcery Linux GCC C Compiler" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.c.compiler.debug">
+ <option id="org.eclipse.cdt.cross.arm.gnu.c.compiler.option.optimization.level.1213548628" superClass="org.eclipse.cdt.cross.arm.gnu.c.compiler.option.optimization.level" value="org.eclipse.cdt.cross.arm.gnu.base.option.optimization.level.none" valueType="enumerated"/>
+ <inputType id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.c.compiler.base.input.1192372863" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.c.compiler.base.input"/>
+ </tool>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.cpp.compiler.debug.1157189098" name="ARM Sourcery Linux GCC C++ Compiler" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.cpp.compiler.debug">
+ <option id="org.eclipse.cdt.cross.arm.gnu.cpp.compiler.option.optimization.level.783576997" superClass="org.eclipse.cdt.cross.arm.gnu.cpp.compiler.option.optimization.level" value="org.eclipse.cdt.cross.arm.gnu.base.option.optimization.level.none" valueType="enumerated"/>
+ </tool>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.c.linker.debug.1363510034" name="ARM Sourcery Linux GCC C Linker" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.c.linker.debug">
+ <inputType id="org.eclipse.cdt.cross.arm.gnu.c.linker.input.1888834244" superClass="org.eclipse.cdt.cross.arm.gnu.c.linker.input">
+ <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
+ <additionalInput kind="additionalinput" paths="$(LIBS)"/>
+ </inputType>
+ </tool>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.cpp.linker.debug.465370179" name="ARM Sourcery Linux GCC C++ Linker" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.cpp.linker.debug"/>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.archiver.base.1032430465" name="ARM Sourcery Linux GCC Archiver" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.archiver.base"/>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.createflash.debug.151874900" name="ARM Sourcery Linux GNU Create Flash Image" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.createflash.debug"/>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.createlisting.debug.283341598" name="ARM Sourcery Linux GNU Create Listing" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.createlisting.debug"/>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.printsize.debug.1480045734" name="ARM Sourcery Linux GNU Print Size" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.printsize.debug"/>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ <cconfiguration id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.release.853057635">
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.release.853057635" moduleId="org.eclipse.cdt.core.settings" name="Release">
+ <externalSettings/>
+ <extensions>
+ <extension id="org.eclipse.cdt.core.GNU_ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+ <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.MakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+ </extensions>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <configuration artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.cross.arm.gnu.buildArtefactType.application" buildProperties="org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release,org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.cross.arm.gnu.buildArtefactType.application" description="" id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.release.853057635" name="Release" parent="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.release">
+ <folderInfo id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.release.853057635." name="/" resourcePath="">
+ <toolChain id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.toolchain.release.633683971" name="ARM Linux GCC (Sourcery G++ Lite)" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.toolchain.release">
+ <option id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.option.debugging.level.1063931051" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.option.debugging.level" value="org.eclipse.cdt.cross.arm.gnu.base.option.debugging.level.none" valueType="enumerated"/>
+ <targetPlatform id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.platform.release.868421890" isAbstract="false" name="Linux Platform" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.platform.release"/>
+ <builder buildPath="${workspace_loc:/Template/Release}" id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.builder.release.187842480" managedBuildOn="true" name="ARM Sourcery Linux GNU Make builder.Release" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.builder.release"/>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.assembler.release.433044665" name="ARM Sourcery Linux GCC Assembler" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.assembler.release">
+ <inputType id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.assembler.base.input.355026700" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.assembler.base.input"/>
+ </tool>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.c.compiler.release.1546150088" name="ARM Sourcery Linux GCC C Compiler" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.c.compiler.release">
+ <option id="org.eclipse.cdt.cross.arm.gnu.c.compiler.option.optimization.level.702127352" superClass="org.eclipse.cdt.cross.arm.gnu.c.compiler.option.optimization.level" value="org.eclipse.cdt.cross.arm.gnu.base.option.optimization.level.size" valueType="enumerated"/>
+ <inputType id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.c.compiler.base.input.1642246522" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.c.compiler.base.input"/>
+ </tool>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.cpp.compiler.release.503006766" name="ARM Sourcery Linux GCC C++ Compiler" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.cpp.compiler.release">
+ <option id="org.eclipse.cdt.cross.arm.gnu.cpp.compiler.option.optimization.level.1037076471" superClass="org.eclipse.cdt.cross.arm.gnu.cpp.compiler.option.optimization.level" value="org.eclipse.cdt.cross.arm.gnu.base.option.optimization.level.size" valueType="enumerated"/>
+ </tool>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.c.linker.release.1172670517" name="ARM Sourcery Linux GCC C Linker" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.c.linker.release">
+ <inputType id="org.eclipse.cdt.cross.arm.gnu.c.linker.input.1638198026" superClass="org.eclipse.cdt.cross.arm.gnu.c.linker.input">
+ <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
+ <additionalInput kind="additionalinput" paths="$(LIBS)"/>
+ </inputType>
+ </tool>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.cpp.linker.release.890405712" name="ARM Sourcery Linux GCC C++ Linker" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.cpp.linker.release"/>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.archiver.base.1452288523" name="ARM Sourcery Linux GCC Archiver" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.archiver.base"/>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.createflash.release.356139662" name="ARM Sourcery Linux GNU Create Flash Image" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.createflash.release"/>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.createlisting.release.1646228713" name="ARM Sourcery Linux GNU Create Listing" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.createlisting.release"/>
+ <tool id="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.printsize.release.36117687" name="ARM Sourcery Linux GNU Print Size" superClass="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.printsize.release"/>
+ </toolChain>
+ </folderInfo>
+ </configuration>
+ </storageModule>
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+ </cconfiguration>
+ </storageModule>
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">
+ <project id="Template.org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.751660805" name="ARM Cross Target Application" projectType="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf"/>
+ </storageModule>
+ <storageModule moduleId="scannerConfiguration">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+ <scannerConfigBuildInfo instanceId="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.release.853057635;org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.release.853057635.;org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.c.compiler.release.1546150088;org.eclipse.cdt.cross.arm.gnu.sourcery.linux.c.compiler.base.input.1642246522">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.cross.arm.gnu.ARM_CS_GCCManagedMakePerProjectProfileC"/>
+ </scannerConfigBuildInfo>
+ <scannerConfigBuildInfo instanceId="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.release.853057635;org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.release.853057635.;org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.assembler.release.433044665;org.eclipse.cdt.cross.arm.gnu.sourcery.linux.assembler.base.input.355026700">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.cross.arm.gnu.ARM_CS_GCCManagedMakePerProjectProfileC"/>
+ </scannerConfigBuildInfo>
+ <scannerConfigBuildInfo instanceId="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.debug.129150122;org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.debug.129150122.;org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.c.compiler.debug.356872829;org.eclipse.cdt.cross.arm.gnu.sourcery.linux.c.compiler.base.input.1192372863">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.cross.arm.gnu.ARM_CS_GCCManagedMakePerProjectProfileC"/>
+ </scannerConfigBuildInfo>
+ <scannerConfigBuildInfo instanceId="org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.debug.129150122;org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.debug.129150122.;org.eclipse.cdt.cross.arm.gnu.sourcery.linux.elf.assembler.debug.414239005;org.eclipse.cdt.cross.arm.gnu.sourcery.linux.assembler.base.input.1585398458">
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.cross.arm.gnu.ARM_CS_GCCManagedMakePerProjectProfileC"/>
+ </scannerConfigBuildInfo>
+ </storageModule>
+</cproject>
diff --git a/china_devel_board/test001/.externalToolBuilders/make.launch b/china_devel_board/test001/.externalToolBuilders/make.launch
new file mode 100644
index 0000000..612fd11
--- /dev/null
+++ b/china_devel_board/test001/.externalToolBuilders/make.launch
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.ui.externaltools.ProgramBuilderLaunchConfigurationType">
+<booleanAttribute key="org.eclipse.debug.ui.ATTR_LAUNCH_IN_BACKGROUND" value="false"/>
+<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="/usr/bin/make"/>
+<stringAttribute key="org.eclipse.ui.externaltools.ATTR_RUN_BUILD_KINDS" value="full,incremental,"/>
+<booleanAttribute key="org.eclipse.ui.externaltools.ATTR_TRIGGERS_CONFIGURED" value="true"/>
+<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${workspace_loc:/test001}"/>
+</launchConfiguration>
diff --git a/china_devel_board/test001/.externalToolBuilders/make_clean.launch b/china_devel_board/test001/.externalToolBuilders/make_clean.launch
new file mode 100644
index 0000000..a2d6289
--- /dev/null
+++ b/china_devel_board/test001/.externalToolBuilders/make_clean.launch
@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.ui.externaltools.ProgramBuilderLaunchConfigurationType">
+<booleanAttribute key="org.eclipse.debug.ui.ATTR_LAUNCH_IN_BACKGROUND" value="false"/>
+<booleanAttribute key="org.eclipse.ui.externaltools.ATTR_BUILDER_ENABLED" value="false"/>
+<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="/usr/bin/make"/>
+<stringAttribute key="org.eclipse.ui.externaltools.ATTR_RUN_BUILD_KINDS" value="full,incremental,"/>
+<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="clean"/>
+<booleanAttribute key="org.eclipse.ui.externaltools.ATTR_TRIGGERS_CONFIGURED" value="true"/>
+<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${workspace_loc:/test001}"/>
+</launchConfiguration>
diff --git a/china_devel_board/test001/.project b/china_devel_board/test001/.project
new file mode 100644
index 0000000..3ee767f
--- /dev/null
+++ b/china_devel_board/test001/.project
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>test001</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.ui.externaltools.ExternalToolBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ <dictionary>
+ <key>LaunchConfigHandle</key>
+ <value><project>/.externalToolBuilders/make_clean.launch</value>
+ </dictionary>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.ui.externaltools.ExternalToolBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ <dictionary>
+ <key>LaunchConfigHandle</key>
+ <value><project>/.externalToolBuilders/make.launch</value>
+ </dictionary>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ </natures>
+</projectDescription>
diff --git a/china_devel_board/test001/Makefile b/china_devel_board/test001/Makefile
new file mode 100644
index 0000000..fa33dd5
--- /dev/null
+++ b/china_devel_board/test001/Makefile
@@ -0,0 +1,47 @@
+include Makefile.common
+LDFLAGS=$(COMMONFLAGS) -fno-exceptions -ffunction-sections -fdata-sections -L$(LIBDIR) -nostartfiles -Wl,--gc-sections,-Tlinker.ld
+
+LDLIBS+=-lm
+LDLIBS+=-lstm32
+
+STARTUP=startup.c
+all: libs src
+ $(CC) -o $(PROGRAM).elf $(LDFLAGS) \
+ -Wl,--whole-archive \
+ src/app.a \
+ -Wl,--no-whole-archive \
+ $(LDLIBS)
+
+ $(OBJCOPY) -O ihex $(PROGRAM).elf $(PROGRAM).hex
+ $(OBJCOPY) -O binary $(PROGRAM).elf $(PROGRAM).bin
+#Extract info contained in ELF to readable text-files:
+ arm-none-eabi-readelf -a $(PROGRAM).elf > $(PROGRAM).info_elf
+ arm-none-eabi-size -d -B -t $(PROGRAM).elf > $(PROGRAM).info_size
+ arm-none-eabi-objdump -S $(PROGRAM).elf > $(PROGRAM).info_code
+ arm-none-eabi-nm -t d -S --size-sort -s $(PROGRAM).elf > $(PROGRAM).info_symbol
+
+.PHONY: libs src clean program
+libs:
+ $(MAKE) -C libs $@
+
+src:
+ $(MAKE) -C src $@
+
+clean:
+ $(MAKE) -C src $@
+ $(MAKE) -C libs $@
+ rm -f $(PROGRAM).elf $(PROGRAM).hex $(PROGRAM).bin $(PROGRAM).info_elf $(PROGRAM).info_size
+ rm -f $(PROGRAM).info_code
+ rm -f $(PROGRAM).info_symbol
+
+program: all
+ stm32flash -w main.bin -b 115200 /dev/ttyUSB0
+
+swd: all
+ vsprog -cstm32_hd -ms -oe -owf -I main.hex
+
+remote_swd: all
+ scp main.hex root@jspc55:/local.1/mwiebusch/stm32/ && ssh root@jspc55 "vsprog -cstm32_hd -ms -oe -owf -I /local.1/mwiebusch/stm32/main.hex"
+
+remote_reset:
+ ssh root@jspc55 "vsprog -cstm32_hd -ms"
\ No newline at end of file
diff --git a/china_devel_board/test001/Makefile.common b/china_devel_board/test001/Makefile.common
new file mode 100644
index 0000000..a787dec
--- /dev/null
+++ b/china_devel_board/test001/Makefile.common
@@ -0,0 +1,35 @@
+TOP=$(shell readlink -f "$(dir $(lastword $(MAKEFILE_LIST)))")
+PROGRAM=main
+LIBDIR=$(TOP)/libs
+#Adust the following line to the library in use
+STMLIB=$(LIBDIR)/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries
+
+
+TC=arm-none-eabi
+CC=$(TC)-gcc
+LD=$(TC)-gcc
+OBJCOPY=$(TC)-objcopy
+AR=$(TC)-ar
+GDB=$(TC)-gdb
+
+
+INCLUDE=-I$(TOP)/inc
+INCLUDE+=-I$(STMLIB)/CMSIS/CM3/CoreSupport
+INCLUDE+=-I$(STMLIB)/CMSIS/CM3/DeviceSupport/ST/STM32F10x
+INCLUDE+=-I$(STMLIB)/STM32F10x_StdPeriph_Driver/inc
+
+
+#Compiler optimize settings:
+# -O0 no optimize, reduce compilation time and make debugging produce the expected results (default).
+# -O1 optimize, reduce code size and execution time, without much increase of compilation time.
+# -O2 optimize, reduce code execution time compared to âO1â, increase of compilation time.
+# -O3 optimize, turns on all optimizations, further increase of compilation time.
+# -Os optimize for size, enables all â-O2â optimizations that do not typically increase code size and other code size optimizations.
+# default settings for release version: COMMONFLAGS=-O3 -g -mcpu=cortex-m3 -mthumb
+# default settings for debug version: COMMONFLAGS=-O0 -g -mcpu=cortex-m3 -mthumb
+COMMONFLAGS=-O0 -g -mcpu=cortex-m3 -mthumb
+CFLAGS+=$(COMMONFLAGS) -Wall -Werror $(INCLUDE)
+#Adust the following line to the type of MCU used
+CFLAGS+=-D STM32F10X_MD
+CFLAGS+=-D VECT_TAB_FLASH
+
diff --git a/china_devel_board/test001/libs/Makefile b/china_devel_board/test001/libs/Makefile
new file mode 100644
index 0000000..e99206a
--- /dev/null
+++ b/china_devel_board/test001/libs/Makefile
@@ -0,0 +1,38 @@
+include ../Makefile.common
+LIBS+=libstm32.a
+CFLAGS+=-c
+
+all: libs
+
+libs: $(LIBS)
+
+libstm32.a:
+ @echo -n "Building $@ ..."
+ @cd $(STMLIB)/CMSIS/CM3/CoreSupport && \
+ $(CC) $(CFLAGS) \
+ core_cm3.c
+ @cd $(STMLIB)/CMSIS/CM3/DeviceSupport/ST/STM32F10x && \
+ $(CC) $(CFLAGS) \
+ system_stm32f10x.c
+ @cd $(STMLIB)/STM32F10x_StdPeriph_Driver/src && \
+ $(CC) $(CFLAGS) \
+ -D"assert_param(expr)=((void)0)" \
+ -I../../CMSIS/CM3/CoreSupport \
+ -I../../CMSIS/CM3/DeviceSupport/ST/STM32F10x \
+ -I../inc \
+ *.c
+ @$(AR) cr $(LIBDIR)/$@ \
+ $(STMLIB)/CMSIS/CM3/CoreSupport/core_cm3.o \
+ $(STMLIB)/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.o \
+ $(STMLIB)/STM32F10x_StdPeriph_Driver/src/*.o
+
+ @echo "done."
+
+
+.PHONY: libs clean
+clean:
+ rm -f $(STMLIB)/STM32F10x_StdPeriph_Driver/src/*.o
+ rm -f $(STMLIB)/CMSIS/CM3/CoreSupport/core_cm3.o
+ rm -f $(STMLIB)/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.o
+ rm -f $(LIBS)
+
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/CoreSupport/core_cm3.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/CoreSupport/core_cm3.c
new file mode 100644
index 0000000..56fddc5
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/CoreSupport/core_cm3.c
@@ -0,0 +1,784 @@
+/**************************************************************************//**
+ * @file core_cm3.c
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Source File
+ * @version V1.30
+ * @date 30. October 2009
+ *
+ * @note
+ * Copyright (C) 2009 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+#include <stdint.h>
+
+/* define compiler specific symbols */
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+
+#endif
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/**
+ * @brief Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+__ASM uint32_t __get_PSP(void)
+{
+ mrs r0, psp
+ bx lr
+}
+
+/**
+ * @brief Set the Process Stack Pointer
+ *
+ * @param topOfProcStack Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP
+ * (process stack pointer) Cortex processor register
+ */
+__ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ msr psp, r0
+ bx lr
+}
+
+/**
+ * @brief Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+__ASM uint32_t __get_MSP(void)
+{
+ mrs r0, msp
+ bx lr
+}
+
+/**
+ * @brief Set the Main Stack Pointer
+ *
+ * @param topOfMainStack Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP
+ * (main stack pointer) Cortex processor register
+ */
+__ASM void __set_MSP(uint32_t mainStackPointer)
+{
+ msr msp, r0
+ bx lr
+}
+
+/**
+ * @brief Reverse byte order in unsigned short value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+__ASM uint32_t __REV16(uint16_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+
+/**
+ * @brief Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in signed short value with sign extension to integer
+ */
+__ASM int32_t __REVSH(int16_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+
+
+#if (__ARMCC_VERSION < 400000)
+
+/**
+ * @brief Remove the exclusive lock created by ldrex
+ *
+ * Removes the exclusive lock which is created by ldrex.
+ */
+__ASM void __CLREX(void)
+{
+ clrex
+}
+
+/**
+ * @brief Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+__ASM uint32_t __get_BASEPRI(void)
+{
+ mrs r0, basepri
+ bx lr
+}
+
+/**
+ * @brief Set the Base Priority value
+ *
+ * @param basePri BasePriority
+ *
+ * Set the base priority register
+ */
+__ASM void __set_BASEPRI(uint32_t basePri)
+{
+ msr basepri, r0
+ bx lr
+}
+
+/**
+ * @brief Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+__ASM uint32_t __get_PRIMASK(void)
+{
+ mrs r0, primask
+ bx lr
+}
+
+/**
+ * @brief Set the Priority Mask value
+ *
+ * @param priMask PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+__ASM void __set_PRIMASK(uint32_t priMask)
+{
+ msr primask, r0
+ bx lr
+}
+
+/**
+ * @brief Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+__ASM uint32_t __get_FAULTMASK(void)
+{
+ mrs r0, faultmask
+ bx lr
+}
+
+/**
+ * @brief Set the Fault Mask value
+ *
+ * @param faultMask faultMask value
+ *
+ * Set the fault mask register
+ */
+__ASM void __set_FAULTMASK(uint32_t faultMask)
+{
+ msr faultmask, r0
+ bx lr
+}
+
+/**
+ * @brief Return the Control Register value
+ *
+ * @return Control value
+ *
+ * Return the content of the control register
+ */
+__ASM uint32_t __get_CONTROL(void)
+{
+ mrs r0, control
+ bx lr
+}
+
+/**
+ * @brief Set the Control Register value
+ *
+ * @param control Control value
+ *
+ * Set the control register
+ */
+__ASM void __set_CONTROL(uint32_t control)
+{
+ msr control, r0
+ bx lr
+}
+
+#endif /* __ARMCC_VERSION */
+
+
+
+#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#pragma diag_suppress=Pe940
+
+/**
+ * @brief Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+uint32_t __get_PSP(void)
+{
+ __ASM("mrs r0, psp");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief Set the Process Stack Pointer
+ *
+ * @param topOfProcStack Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP
+ * (process stack pointer) Cortex processor register
+ */
+void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM("msr psp, r0");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+uint32_t __get_MSP(void)
+{
+ __ASM("mrs r0, msp");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief Set the Main Stack Pointer
+ *
+ * @param topOfMainStack Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP
+ * (main stack pointer) Cortex processor register
+ */
+void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM("msr msp, r0");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief Reverse byte order in unsigned short value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+uint32_t __REV16(uint16_t value)
+{
+ __ASM("rev16 r0, r0");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief Reverse bit order of value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse bit order of value
+ */
+uint32_t __RBIT(uint32_t value)
+{
+ __ASM("rbit r0, r0");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief LDR Exclusive (8 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 8 bit values)
+ */
+uint8_t __LDREXB(uint8_t *addr)
+{
+ __ASM("ldrexb r0, [r0]");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief LDR Exclusive (16 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 16 bit values
+ */
+uint16_t __LDREXH(uint16_t *addr)
+{
+ __ASM("ldrexh r0, [r0]");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief LDR Exclusive (32 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 32 bit values
+ */
+uint32_t __LDREXW(uint32_t *addr)
+{
+ __ASM("ldrex r0, [r0]");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief STR Exclusive (8 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 8 bit values
+ */
+uint32_t __STREXB(uint8_t value, uint8_t *addr)
+{
+ __ASM("strexb r0, r0, [r1]");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief STR Exclusive (16 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 16 bit values
+ */
+uint32_t __STREXH(uint16_t value, uint16_t *addr)
+{
+ __ASM("strexh r0, r0, [r1]");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief STR Exclusive (32 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 32 bit values
+ */
+uint32_t __STREXW(uint32_t value, uint32_t *addr)
+{
+ __ASM("strex r0, r0, [r1]");
+ __ASM("bx lr");
+}
+
+#pragma diag_default=Pe940
+
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/**
+ * @brief Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+uint32_t __get_PSP(void) __attribute__( ( naked ) );
+uint32_t __get_PSP(void)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("MRS %0, psp\n\t"
+ "MOV r0, %0 \n\t"
+ "BX lr \n\t" : "=r" (result) );
+ return(result);
+}
+
+/**
+ * @brief Set the Process Stack Pointer
+ *
+ * @param topOfProcStack Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP
+ * (process stack pointer) Cortex processor register
+ */
+void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) );
+void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n\t"
+ "BX lr \n\t" : : "r" (topOfProcStack) );
+}
+
+/**
+ * @brief Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+uint32_t __get_MSP(void) __attribute__( ( naked ) );
+uint32_t __get_MSP(void)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("MRS %0, msp\n\t"
+ "MOV r0, %0 \n\t"
+ "BX lr \n\t" : "=r" (result) );
+ return(result);
+}
+
+/**
+ * @brief Set the Main Stack Pointer
+ *
+ * @param topOfMainStack Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP
+ * (main stack pointer) Cortex processor register
+ */
+void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) );
+void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n\t"
+ "BX lr \n\t" : : "r" (topOfMainStack) );
+}
+
+/**
+ * @brief Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+uint32_t __get_BASEPRI(void)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+/**
+ * @brief Set the Base Priority value
+ *
+ * @param basePri BasePriority
+ *
+ * Set the base priority register
+ */
+void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) );
+}
+
+/**
+ * @brief Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+uint32_t __get_PRIMASK(void)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+/**
+ * @brief Set the Priority Mask value
+ *
+ * @param priMask PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) );
+}
+
+/**
+ * @brief Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+/**
+ * @brief Set the Fault Mask value
+ *
+ * @param faultMask faultMask value
+ *
+ * Set the fault mask register
+ */
+void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) );
+}
+
+/**
+ * @brief Return the Control Register value
+*
+* @return Control value
+ *
+ * Return the content of the control register
+ */
+uint32_t __get_CONTROL(void)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+/**
+ * @brief Set the Control Register value
+ *
+ * @param control Control value
+ *
+ * Set the control register
+ */
+void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) );
+}
+
+
+/**
+ * @brief Reverse byte order in integer value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in integer value
+ */
+uint32_t __REV(uint32_t value)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+/**
+ * @brief Reverse byte order in unsigned short value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+uint32_t __REV16(uint16_t value)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+/**
+ * @brief Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in signed short value with sign extension to integer
+ */
+int32_t __REVSH(int16_t value)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+/**
+ * @brief Reverse bit order of value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse bit order of value
+ */
+uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+/**
+ * @brief LDR Exclusive (8 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 8 bit value
+ */
+uint8_t __LDREXB(uint8_t *addr)
+{
+ uint8_t result=0;
+
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) );
+ return(result);
+}
+
+/**
+ * @brief LDR Exclusive (16 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 16 bit values
+ */
+uint16_t __LDREXH(uint16_t *addr)
+{
+ uint16_t result=0;
+
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) );
+ return(result);
+}
+
+/**
+ * @brief LDR Exclusive (32 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 32 bit values
+ */
+uint32_t __LDREXW(uint32_t *addr)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) );
+ return(result);
+}
+
+/**
+ * @brief STR Exclusive (8 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 8 bit values
+ */
+uint32_t __STREXB(uint8_t value, uint8_t *addr)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("strexb %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
+ return(result);
+}
+
+/**
+ * @brief STR Exclusive (16 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 16 bit values
+ */
+uint32_t __STREXH(uint16_t value, uint16_t *addr)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("strexh %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
+ return(result);
+}
+
+/**
+ * @brief STR Exclusive (32 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 32 bit values
+ */
+uint32_t __STREXW(uint32_t value, uint32_t *addr)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
+ return(result);
+}
+
+
+#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/CoreSupport/core_cm3.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/CoreSupport/core_cm3.h
new file mode 100644
index 0000000..2b6b51a
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/CoreSupport/core_cm3.h
@@ -0,0 +1,1818 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V1.30
+ * @date 30. October 2009
+ *
+ * @note
+ * Copyright (C) 2009 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+#ifndef __CM3_CORE_H__
+#define __CM3_CORE_H__
+
+/** @addtogroup CMSIS_CM3_core_LintCinfiguration CMSIS CM3 Core Lint Configuration
+ *
+ * List of Lint messages which will be suppressed and not shown:
+ * - Error 10: \n
+ * register uint32_t __regBasePri __asm("basepri"); \n
+ * Error 10: Expecting ';'
+ * .
+ * - Error 530: \n
+ * return(__regBasePri); \n
+ * Warning 530: Symbol '__regBasePri' (line 264) not initialized
+ * .
+ * - Error 550: \n
+ * __regBasePri = (basePri & 0x1ff); \n
+ * Warning 550: Symbol '__regBasePri' (line 271) not accessed
+ * .
+ * - Error 754: \n
+ * uint32_t RESERVED0[24]; \n
+ * Info 754: local structure member '<some, not used in the HAL>' (line 109, file ./cm3_core.h) not referenced
+ * .
+ * - Error 750: \n
+ * #define __CM3_CORE_H__ \n
+ * Info 750: local macro '__CM3_CORE_H__' (line 43, file./cm3_core.h) not referenced
+ * .
+ * - Error 528: \n
+ * static __INLINE void NVIC_DisableIRQ(uint32_t IRQn) \n
+ * Warning 528: Symbol 'NVIC_DisableIRQ(unsigned int)' (line 419, file ./cm3_core.h) not referenced
+ * .
+ * - Error 751: \n
+ * } InterruptType_Type; \n
+ * Info 751: local typedef 'InterruptType_Type' (line 170, file ./cm3_core.h) not referenced
+ * .
+ * Note: To re-enable a Message, insert a space before 'lint' *
+ *
+ */
+
+/*lint -save */
+/*lint -e10 */
+/*lint -e530 */
+/*lint -e550 */
+/*lint -e754 */
+/*lint -e750 */
+/*lint -e528 */
+/*lint -e751 */
+
+
+/** @addtogroup CMSIS_CM3_core_definitions CM3 Core Definitions
+ This file defines all structures and symbols for CMSIS core:
+ - CMSIS version number
+ - Cortex-M core registers and bitfields
+ - Cortex-M core peripheral base address
+ @{
+ */
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define __CM3_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x30) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex core */
+
+#include <stdint.h> /* Include standard types */
+
+#if defined (__ICCARM__)
+ #include <intrinsics.h> /* IAR Intrinsics */
+#endif
+
+
+#ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4 /*!< standard definition for NVIC Priority Bits */
+#endif
+
+
+
+
+/**
+ * IO definitions
+ *
+ * define access restrictions to peripheral registers
+ */
+
+#ifdef __cplusplus
+ #define __I volatile /*!< defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< defines 'read only' permissions */
+#endif
+#define __O volatile /*!< defines 'write only' permissions */
+#define __IO volatile /*!< defines 'read / write' permissions */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** @addtogroup CMSIS_CM3_core_register CMSIS CM3 Core Register
+ @{
+*/
+
+
+/** @addtogroup CMSIS_CM3_NVIC CMSIS CM3 NVIC
+ memory mapped structure for Nested Vectored Interrupt Controller (NVIC)
+ @{
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 Software Trigger Interrupt Register */
+} NVIC_Type;
+/*@}*/ /* end of group CMSIS_CM3_NVIC */
+
+
+/** @addtogroup CMSIS_CM3_SCB CMSIS CM3 SCB
+ memory mapped structure for System Control Block (SCB)
+ @{
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x08 Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x18 System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x28 Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x2C Hard Fault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x34 Mem Manage Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x38 Bus Fault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x3C Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x40 Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x48 Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x4C Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x50 Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x60 ISA Feature Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1ul << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (0x1FFul << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFul << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7ul << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1ul << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1ul << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1ul << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1ul << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1ul << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1ul << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1ul << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1ul << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1ul << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1ul << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1ul << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1ul << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1ul << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1ul << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1ul << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1ul << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1ul << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1ul << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFul << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFul << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFul << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1ul << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1ul << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1ul << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+/*@}*/ /* end of group CMSIS_CM3_SCB */
+
+
+/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick
+ memory mapped structure for SysTick
+ @{
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+/*@}*/ /* end of group CMSIS_CM3_SysTick */
+
+
+/** @addtogroup CMSIS_CM3_ITM CMSIS CM3 ITM
+ memory mapped structure for Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x00 ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __IO uint32_t IWR; /*!< Offset: ITM Integration Write Register */
+ __IO uint32_t IRR; /*!< Offset: ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __IO uint32_t LAR; /*!< Offset: ITM Lock Access Register */
+ __IO uint32_t LSR; /*!< Offset: ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFul << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1ul << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_ATBID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_ATBID_Msk (0x7Ful << ITM_TCR_ATBID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3ul << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1ul << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1ul << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1ul << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1ul << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1ul << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1ul << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1ul << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1ul << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1ul << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1ul << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1ul << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+/*@}*/ /* end of group CMSIS_CM3_ITM */
+
+
+/** @addtogroup CMSIS_CM3_InterruptType CMSIS CM3 Interrupt Type
+ memory mapped structure for Interrupt Type
+ @{
+ */
+typedef struct
+{
+ uint32_t RESERVED0;
+ __I uint32_t ICTR; /*!< Offset: 0x04 Interrupt Control Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x08 Auxiliary Control Register */
+#else
+ uint32_t RESERVED1;
+#endif
+} InterruptType_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define InterruptType_ICTR_INTLINESNUM_Pos 0 /*!< InterruptType ICTR: INTLINESNUM Position */
+#define InterruptType_ICTR_INTLINESNUM_Msk (0x1Ful << InterruptType_ICTR_INTLINESNUM_Pos) /*!< InterruptType ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define InterruptType_ACTLR_DISFOLD_Pos 2 /*!< InterruptType ACTLR: DISFOLD Position */
+#define InterruptType_ACTLR_DISFOLD_Msk (1ul << InterruptType_ACTLR_DISFOLD_Pos) /*!< InterruptType ACTLR: DISFOLD Mask */
+
+#define InterruptType_ACTLR_DISDEFWBUF_Pos 1 /*!< InterruptType ACTLR: DISDEFWBUF Position */
+#define InterruptType_ACTLR_DISDEFWBUF_Msk (1ul << InterruptType_ACTLR_DISDEFWBUF_Pos) /*!< InterruptType ACTLR: DISDEFWBUF Mask */
+
+#define InterruptType_ACTLR_DISMCYCINT_Pos 0 /*!< InterruptType ACTLR: DISMCYCINT Position */
+#define InterruptType_ACTLR_DISMCYCINT_Msk (1ul << InterruptType_ACTLR_DISMCYCINT_Pos) /*!< InterruptType ACTLR: DISMCYCINT Mask */
+/*@}*/ /* end of group CMSIS_CM3_InterruptType */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
+/** @addtogroup CMSIS_CM3_MPU CMSIS CM3 MPU
+ memory mapped structure for Memory Protection Unit (MPU)
+ @{
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x00 MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x04 MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x08 MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x0C MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x10 MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x14 MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x18 MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x1C MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x20 MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x24 MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x28 MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFul << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFul << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1ul << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1ul << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1ul << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1ul << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFul << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFul << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1ul << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFul << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: XN Position */
+#define MPU_RASR_XN_Msk (1ul << MPU_RASR_XN_Pos) /*!< MPU RASR: XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: AP Position */
+#define MPU_RASR_AP_Msk (7ul << MPU_RASR_AP_Pos) /*!< MPU RASR: AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: TEX Position */
+#define MPU_RASR_TEX_Msk (7ul << MPU_RASR_TEX_Pos) /*!< MPU RASR: TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: Shareable bit Position */
+#define MPU_RASR_S_Msk (1ul << MPU_RASR_S_Pos) /*!< MPU RASR: Shareable bit Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: Cacheable bit Position */
+#define MPU_RASR_C_Msk (1ul << MPU_RASR_C_Pos) /*!< MPU RASR: Cacheable bit Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: Bufferable bit Position */
+#define MPU_RASR_B_Msk (1ul << MPU_RASR_B_Pos) /*!< MPU RASR: Bufferable bit Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFul << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1Ful << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENA_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENA_Msk (0x1Ful << MPU_RASR_ENA_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@}*/ /* end of group CMSIS_CM3_MPU */
+#endif
+
+
+/** @addtogroup CMSIS_CM3_CoreDebug CMSIS CM3 Core Debug
+ memory mapped structure for Core Debug Register
+ @{
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1ul << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1ul << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1ul << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1ul << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1ul << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1ul << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1ul << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1ul << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1ul << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1ul << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1ul << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1ul << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+/*@}*/ /* end of group CMSIS_CM3_CoreDebug */
+
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000) /*!< ITM Base Address */
+#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */
+
+#define InterruptType ((InterruptType_Type *) SCS_BASE) /*!< Interrupt Type Register */
+#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE) /*!< ITM configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type*) MPU_BASE) /*!< Memory Protection Unit */
+#endif
+
+/*@}*/ /* end of group CMSIS_CM3_core_register */
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+
+#endif
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#define __enable_fault_irq __enable_fiq
+#define __disable_fault_irq __disable_fiq
+
+#define __NOP __nop
+#define __WFI __wfi
+#define __WFE __wfe
+#define __SEV __sev
+#define __ISB() __isb(0)
+#define __DSB() __dsb(0)
+#define __DMB() __dmb(0)
+#define __REV __rev
+#define __RBIT __rbit
+#define __LDREXB(ptr) ((unsigned char ) __ldrex(ptr))
+#define __LDREXH(ptr) ((unsigned short) __ldrex(ptr))
+#define __LDREXW(ptr) ((unsigned int ) __ldrex(ptr))
+#define __STREXB(value, ptr) __strex(value, ptr)
+#define __STREXH(value, ptr) __strex(value, ptr)
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/* intrinsic unsigned long long __ldrexd(volatile void *ptr) */
+/* intrinsic int __strexd(unsigned long long val, volatile void *ptr) */
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+
+/**
+ * @brief Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+extern uint32_t __get_PSP(void);
+
+/**
+ * @brief Set the Process Stack Pointer
+ *
+ * @param topOfProcStack Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP
+ * (process stack pointer) Cortex processor register
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/**
+ * @brief Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+extern uint32_t __get_MSP(void);
+
+/**
+ * @brief Set the Main Stack Pointer
+ *
+ * @param topOfMainStack Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP
+ * (main stack pointer) Cortex processor register
+ */
+extern void __set_MSP(uint32_t topOfMainStack);
+
+/**
+ * @brief Reverse byte order in unsigned short value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+extern uint32_t __REV16(uint16_t value);
+
+/**
+ * @brief Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in signed short value with sign extension to integer
+ */
+extern int32_t __REVSH(int16_t value);
+
+
+#if (__ARMCC_VERSION < 400000)
+
+/**
+ * @brief Remove the exclusive lock created by ldrex
+ *
+ * Removes the exclusive lock which is created by ldrex.
+ */
+extern void __CLREX(void);
+
+/**
+ * @brief Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+extern uint32_t __get_BASEPRI(void);
+
+/**
+ * @brief Set the Base Priority value
+ *
+ * @param basePri BasePriority
+ *
+ * Set the base priority register
+ */
+extern void __set_BASEPRI(uint32_t basePri);
+
+/**
+ * @brief Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+extern uint32_t __get_PRIMASK(void);
+
+/**
+ * @brief Set the Priority Mask value
+ *
+ * @param priMask PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+extern void __set_PRIMASK(uint32_t priMask);
+
+/**
+ * @brief Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+extern uint32_t __get_FAULTMASK(void);
+
+/**
+ * @brief Set the Fault Mask value
+ *
+ * @param faultMask faultMask value
+ *
+ * Set the fault mask register
+ */
+extern void __set_FAULTMASK(uint32_t faultMask);
+
+/**
+ * @brief Return the Control Register value
+ *
+ * @return Control value
+ *
+ * Return the content of the control register
+ */
+extern uint32_t __get_CONTROL(void);
+
+/**
+ * @brief Set the Control Register value
+ *
+ * @param control Control value
+ *
+ * Set the control register
+ */
+extern void __set_CONTROL(uint32_t control);
+
+#else /* (__ARMCC_VERSION >= 400000) */
+
+/**
+ * @brief Remove the exclusive lock created by ldrex
+ *
+ * Removes the exclusive lock which is created by ldrex.
+ */
+#define __CLREX __clrex
+
+/**
+ * @brief Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+static __INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+/**
+ * @brief Set the Base Priority value
+ *
+ * @param basePri BasePriority
+ *
+ * Set the base priority register
+ */
+static __INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+/**
+ * @brief Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+static __INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+/**
+ * @brief Set the Priority Mask value
+ *
+ * @param priMask PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+static __INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+/**
+ * @brief Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+static __INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+/**
+ * @brief Set the Fault Mask value
+ *
+ * @param faultMask faultMask value
+ *
+ * Set the fault mask register
+ */
+static __INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & 1);
+}
+
+/**
+ * @brief Return the Control Register value
+ *
+ * @return Control value
+ *
+ * Return the content of the control register
+ */
+static __INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+/**
+ * @brief Set the Control Register value
+ *
+ * @param control Control value
+ *
+ * Set the control register
+ */
+static __INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+#endif /* __ARMCC_VERSION */
+
+
+
+#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#define __enable_irq __enable_interrupt /*!< global Interrupt enable */
+#define __disable_irq __disable_interrupt /*!< global Interrupt disable */
+
+static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); }
+static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); }
+
+#define __NOP __no_operation /*!< no operation intrinsic in IAR Compiler */
+static __INLINE void __WFI() { __ASM ("wfi"); }
+static __INLINE void __WFE() { __ASM ("wfe"); }
+static __INLINE void __SEV() { __ASM ("sev"); }
+static __INLINE void __CLREX() { __ASM ("clrex"); }
+
+/* intrinsic void __ISB(void) */
+/* intrinsic void __DSB(void) */
+/* intrinsic void __DMB(void) */
+/* intrinsic void __set_PRIMASK(); */
+/* intrinsic void __get_PRIMASK(); */
+/* intrinsic void __set_FAULTMASK(); */
+/* intrinsic void __get_FAULTMASK(); */
+/* intrinsic uint32_t __REV(uint32_t value); */
+/* intrinsic uint32_t __REVSH(uint32_t value); */
+/* intrinsic unsigned long __STREX(unsigned long, unsigned long); */
+/* intrinsic unsigned long __LDREX(unsigned long *); */
+
+
+/**
+ * @brief Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+extern uint32_t __get_PSP(void);
+
+/**
+ * @brief Set the Process Stack Pointer
+ *
+ * @param topOfProcStack Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP
+ * (process stack pointer) Cortex processor register
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/**
+ * @brief Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+extern uint32_t __get_MSP(void);
+
+/**
+ * @brief Set the Main Stack Pointer
+ *
+ * @param topOfMainStack Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP
+ * (main stack pointer) Cortex processor register
+ */
+extern void __set_MSP(uint32_t topOfMainStack);
+
+/**
+ * @brief Reverse byte order in unsigned short value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+extern uint32_t __REV16(uint16_t value);
+
+/**
+ * @brief Reverse bit order of value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse bit order of value
+ */
+extern uint32_t __RBIT(uint32_t value);
+
+/**
+ * @brief LDR Exclusive (8 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 8 bit values)
+ */
+extern uint8_t __LDREXB(uint8_t *addr);
+
+/**
+ * @brief LDR Exclusive (16 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 16 bit values
+ */
+extern uint16_t __LDREXH(uint16_t *addr);
+
+/**
+ * @brief LDR Exclusive (32 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 32 bit values
+ */
+extern uint32_t __LDREXW(uint32_t *addr);
+
+/**
+ * @brief STR Exclusive (8 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 8 bit values
+ */
+extern uint32_t __STREXB(uint8_t value, uint8_t *addr);
+
+/**
+ * @brief STR Exclusive (16 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 16 bit values
+ */
+extern uint32_t __STREXH(uint16_t value, uint16_t *addr);
+
+/**
+ * @brief STR Exclusive (32 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 32 bit values
+ */
+extern uint32_t __STREXW(uint32_t value, uint32_t *addr);
+
+
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+static __INLINE void __enable_irq() { __ASM volatile ("cpsie i"); }
+static __INLINE void __disable_irq() { __ASM volatile ("cpsid i"); }
+
+static __INLINE void __enable_fault_irq() { __ASM volatile ("cpsie f"); }
+static __INLINE void __disable_fault_irq() { __ASM volatile ("cpsid f"); }
+
+static __INLINE void __NOP() { __ASM volatile ("nop"); }
+static __INLINE void __WFI() { __ASM volatile ("wfi"); }
+static __INLINE void __WFE() { __ASM volatile ("wfe"); }
+static __INLINE void __SEV() { __ASM volatile ("sev"); }
+static __INLINE void __ISB() { __ASM volatile ("isb"); }
+static __INLINE void __DSB() { __ASM volatile ("dsb"); }
+static __INLINE void __DMB() { __ASM volatile ("dmb"); }
+static __INLINE void __CLREX() { __ASM volatile ("clrex"); }
+
+
+/**
+ * @brief Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+extern uint32_t __get_PSP(void);
+
+/**
+ * @brief Set the Process Stack Pointer
+ *
+ * @param topOfProcStack Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP
+ * (process stack pointer) Cortex processor register
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/**
+ * @brief Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+extern uint32_t __get_MSP(void);
+
+/**
+ * @brief Set the Main Stack Pointer
+ *
+ * @param topOfMainStack Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP
+ * (main stack pointer) Cortex processor register
+ */
+extern void __set_MSP(uint32_t topOfMainStack);
+
+/**
+ * @brief Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+extern uint32_t __get_BASEPRI(void);
+
+/**
+ * @brief Set the Base Priority value
+ *
+ * @param basePri BasePriority
+ *
+ * Set the base priority register
+ */
+extern void __set_BASEPRI(uint32_t basePri);
+
+/**
+ * @brief Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+extern uint32_t __get_PRIMASK(void);
+
+/**
+ * @brief Set the Priority Mask value
+ *
+ * @param priMask PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+extern void __set_PRIMASK(uint32_t priMask);
+
+/**
+ * @brief Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+extern uint32_t __get_FAULTMASK(void);
+
+/**
+ * @brief Set the Fault Mask value
+ *
+ * @param faultMask faultMask value
+ *
+ * Set the fault mask register
+ */
+extern void __set_FAULTMASK(uint32_t faultMask);
+
+/**
+ * @brief Return the Control Register value
+*
+* @return Control value
+ *
+ * Return the content of the control register
+ */
+extern uint32_t __get_CONTROL(void);
+
+/**
+ * @brief Set the Control Register value
+ *
+ * @param control Control value
+ *
+ * Set the control register
+ */
+extern void __set_CONTROL(uint32_t control);
+
+/**
+ * @brief Reverse byte order in integer value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in integer value
+ */
+extern uint32_t __REV(uint32_t value);
+
+/**
+ * @brief Reverse byte order in unsigned short value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+extern uint32_t __REV16(uint16_t value);
+
+/**
+ * @brief Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in signed short value with sign extension to integer
+ */
+extern int32_t __REVSH(int16_t value);
+
+/**
+ * @brief Reverse bit order of value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse bit order of value
+ */
+extern uint32_t __RBIT(uint32_t value);
+
+/**
+ * @brief LDR Exclusive (8 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 8 bit value
+ */
+extern uint8_t __LDREXB(uint8_t *addr);
+
+/**
+ * @brief LDR Exclusive (16 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 16 bit values
+ */
+extern uint16_t __LDREXH(uint16_t *addr);
+
+/**
+ * @brief LDR Exclusive (32 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 32 bit values
+ */
+extern uint32_t __LDREXW(uint32_t *addr);
+
+/**
+ * @brief STR Exclusive (8 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 8 bit values
+ */
+extern uint32_t __STREXB(uint8_t value, uint8_t *addr);
+
+/**
+ * @brief STR Exclusive (16 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 16 bit values
+ */
+extern uint32_t __STREXH(uint16_t value, uint16_t *addr);
+
+/**
+ * @brief STR Exclusive (32 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 32 bit values
+ */
+extern uint32_t __STREXW(uint32_t value, uint32_t *addr);
+
+
+#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+
+/** @addtogroup CMSIS_CM3_Core_FunctionInterface CMSIS CM3 Core Function Interface
+ Core Function Interface containing:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Reset Functions
+*/
+/*@{*/
+
+/* ########################## NVIC functions #################################### */
+
+/**
+ * @brief Set the Priority Grouping in NVIC Interrupt Controller
+ *
+ * @param PriorityGroup is priority grouping field
+ *
+ * Set the priority grouping field using the required unlock sequence.
+ * The parameter priority_grouping is assigned to the field
+ * SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used.
+ * In case of a conflict between priority grouping and available
+ * priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ */
+static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ (0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+/**
+ * @brief Get the Priority Grouping from NVIC Interrupt Controller
+ *
+ * @return priority grouping field
+ *
+ * Get the priority grouping from NVIC Interrupt Controller.
+ * priority grouping is SCB->AIRCR [10:8] PRIGROUP field.
+ */
+static __INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+/**
+ * @brief Enable Interrupt in NVIC Interrupt Controller
+ *
+ * @param IRQn The positive number of the external interrupt to enable
+ *
+ * Enable a device specific interupt in the NVIC interrupt controller.
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+/**
+ * @brief Disable the interrupt line for external interrupt specified
+ *
+ * @param IRQn The positive number of the external interrupt to disable
+ *
+ * Disable a device specific interupt in the NVIC interrupt controller.
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+/**
+ * @brief Read the interrupt pending bit for a device specific interrupt source
+ *
+ * @param IRQn The number of the device specifc interrupt
+ * @return 1 = interrupt pending, 0 = interrupt not pending
+ *
+ * Read the pending register in NVIC and return 1 if its status is pending,
+ * otherwise it returns 0
+ */
+static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+/**
+ * @brief Set the pending bit for an external interrupt
+ *
+ * @param IRQn The number of the interrupt for set pending
+ *
+ * Set the pending bit for the specified interrupt.
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+/**
+ * @brief Clear the pending bit for an external interrupt
+ *
+ * @param IRQn The number of the interrupt for clear pending
+ *
+ * Clear the pending bit for the specified interrupt.
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+/**
+ * @brief Read the active bit for an external interrupt
+ *
+ * @param IRQn The number of the interrupt for read active bit
+ * @return 1 = interrupt active, 0 = interrupt not active
+ *
+ * Read the active register in NVIC and returns 1 if its status is active,
+ * otherwise it returns 0.
+ */
+static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+/**
+ * @brief Set the priority for an interrupt
+ *
+ * @param IRQn The number of the interrupt for set priority
+ * @param priority The priority to set
+ *
+ * Set the priority for the specified interrupt. The interrupt
+ * number can be positive to specify an external (device specific)
+ * interrupt, or negative to specify an internal (core) interrupt.
+ *
+ * Note: The priority cannot be set for every core interrupt.
+ */
+static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+/**
+ * @brief Read the priority for an interrupt
+ *
+ * @param IRQn The number of the interrupt for get priority
+ * @return The priority for the interrupt
+ *
+ * Read the priority for the specified interrupt. The interrupt
+ * number can be positive to specify an external (device specific)
+ * interrupt, or negative to specify an internal (core) interrupt.
+ *
+ * The returned priority value is automatically aligned to the implemented
+ * priority bits of the microcontroller.
+ *
+ * Note: The priority cannot be set for every core interrupt.
+ */
+static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M3 system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/**
+ * @brief Encode the priority for an interrupt
+ *
+ * @param PriorityGroup The used priority group
+ * @param PreemptPriority The preemptive priority value (starting from 0)
+ * @param SubPriority The sub priority value (starting from 0)
+ * @return The encoded priority for the interrupt
+ *
+ * Encode the priority for an interrupt with the given priority group,
+ * preemptive priority value and sub priority value.
+ * In case of a conflict between priority grouping and available
+ * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+ *
+ * The returned priority value can be used for NVIC_SetPriority(...) function
+ */
+static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/**
+ * @brief Decode the priority of an interrupt
+ *
+ * @param Priority The priority for the interrupt
+ * @param PriorityGroup The used priority group
+ * @param pPreemptPriority The preemptive priority value (starting from 0)
+ * @param pSubPriority The sub priority value (starting from 0)
+ *
+ * Decode an interrupt priority value with the given priority group to
+ * preemptive priority value and sub priority value.
+ * In case of a conflict between priority grouping and available
+ * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+ *
+ * The priority value can be retrieved with NVIC_GetPriority(...) function
+ */
+static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+
+/* ################################## SysTick function ############################################ */
+
+#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0)
+
+/**
+ * @brief Initialize and start the SysTick counter and its interrupt.
+ *
+ * @param ticks number of ticks between two interrupts
+ * @return 1 = failed, 0 = successful
+ *
+ * Initialise the system tick timer and its interrupt and start the
+ * system tick timer / counter in free running mode to generate
+ * periodical interrupts.
+ */
+static __INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+
+
+
+/* ################################## Reset function ############################################ */
+
+/**
+ * @brief Initiate a system reset request.
+ *
+ * Initiate a system reset request to reset the MCU
+ */
+static __INLINE void NVIC_SystemReset(void)
+{
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@}*/ /* end of group CMSIS_CM3_Core_FunctionInterface */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+
+/** @addtogroup CMSIS_CM3_CoreDebugInterface CMSIS CM3 Core Debug Interface
+ Core Debug Interface containing:
+ - Core Debug Receive / Transmit Functions
+ - Core Debug Defines
+ - Core Debug Variables
+*/
+/*@{*/
+
+extern volatile int ITM_RxBuffer; /*!< variable to receive characters */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */
+
+
+/**
+ * @brief Outputs a character via the ITM channel 0
+ *
+ * @param ch character to output
+ * @return character to output
+ *
+ * The function outputs a character via the ITM channel 0.
+ * The function returns when no debugger is connected that has booked the output.
+ * It is blocking when a debugger is connected, but the previous character send is not transmitted.
+ */
+static __INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */
+ (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1ul << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/**
+ * @brief Inputs a character via variable ITM_RxBuffer
+ *
+ * @return received character, -1 = no character received
+ *
+ * The function inputs a character via variable ITM_RxBuffer.
+ * The function returns when no debugger is connected that has booked the output.
+ * It is blocking when a debugger is connected, but the previous character send is not transmitted.
+ */
+static __INLINE int ITM_ReceiveChar (void) {
+ int ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ * @brief Check if a character via variable ITM_RxBuffer is available
+ *
+ * @return 1 = character available, 0 = no character available
+ *
+ * The function checks variable ITM_RxBuffer whether a character is available or not.
+ * The function returns '1' if a character is available and '0' if no character is available.
+ */
+static __INLINE int ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@}*/ /* end of group CMSIS_CM3_core_DebugInterface */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+/*@}*/ /* end of group CMSIS_CM3_core_definitions */
+
+#endif /* __CM3_CORE_H__ */
+
+/*lint -restore */
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/Release_Notes.html b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/Release_Notes.html
new file mode 100644
index 0000000..b80f38d
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/Release_Notes.html
@@ -0,0 +1,284 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns="http://www.w3.org/TR/REC-html40"><head>
+
+
+
+
+
+
+
+
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+<link rel="File-List" href="Library_files/filelist.xml">
+<link rel="Edit-Time-Data" href="Library_files/editdata.mso"><!--[if !mso]> <style> v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} </style> <![endif]--><title>Release Notes for STM32F10x CMSIS</title><!--[if gte mso 9]><xml> <o:DocumentProperties> <o:Author>STMicroelectronics</o:Author> <o:LastAuthor>STMicroelectronics</o:LastAuthor> <o:Revision>37</o:Revision> <o:TotalTime>136</o:TotalTime> <o:Created>2009-02-27T19:26:00Z</o:Created> <o:LastSaved>2009-03-01T17:56:00Z</o:LastSaved> <o:Pages>1</o:Pages> <o:Words>522</o:Words> <o:Characters>2977</o:Characters> <o:Company>STMicroelectronics</o:Company> <o:Lines>24</o:Lines> <o:Paragraphs>6</o:Paragraphs> <o:CharactersWithSpaces>3493</o:CharactersWithSpaces> <o:Version>11.6568</o:Version> </o:DocumentProperties> </xml><![endif]--><!--[if gte mso 9]><xml> <w:WordDocument> <w:Zoom>110</w:Zoom> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" LatentStyleCount="156"> </w:LatentStyles> </xml><![endif]-->
+
+
+
+<style>
+<!--
+/* Style Definitions */
+p.MsoNormal, li.MsoNormal, div.MsoNormal
+{mso-style-parent:"";
+margin:0in;
+margin-bottom:.0001pt;
+mso-pagination:widow-orphan;
+font-size:12.0pt;
+font-family:"Times New Roman";
+mso-fareast-font-family:"Times New Roman";}
+h2
+{mso-style-next:Normal;
+margin-top:12.0pt;
+margin-right:0in;
+margin-bottom:3.0pt;
+margin-left:0in;
+mso-pagination:widow-orphan;
+page-break-after:avoid;
+mso-outline-level:2;
+font-size:14.0pt;
+font-family:Arial;
+font-weight:bold;
+font-style:italic;}
+a:link, span.MsoHyperlink
+{color:blue;
+text-decoration:underline;
+text-underline:single;}
+a:visited, span.MsoHyperlinkFollowed
+{color:blue;
+text-decoration:underline;
+text-underline:single;}
+p
+{mso-margin-top-alt:auto;
+margin-right:0in;
+mso-margin-bottom-alt:auto;
+margin-left:0in;
+mso-pagination:widow-orphan;
+font-size:12.0pt;
+font-family:"Times New Roman";
+mso-fareast-font-family:"Times New Roman";}
+@page Section1
+{size:8.5in 11.0in;
+margin:1.0in 1.25in 1.0in 1.25in;
+mso-header-margin:.5in;
+mso-footer-margin:.5in;
+mso-paper-source:0;}
+div.Section1
+{page:Section1;}
+-->
+</style><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]--><!--[if gte mso 9]><xml> <o:shapedefaults v:ext="edit" spidmax="5122"/> </xml><![endif]--><!--[if gte mso 9]><xml> <o:shapelayout v:ext="edit"> <o:idmap v:ext="edit" data="1"/> </o:shapelayout></xml><![endif]--></head>
+<body lang="EN-US" link="blue" vlink="blue">
+<div class="Section1">
+<p class="MsoNormal"><span style="font-family: Arial;"><o:p><br>
+</o:p></span></p>
+<div align="center">
+<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
+<tbody>
+<tr style="">
+<td style="padding: 0cm;" valign="top">
+<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
+<tbody>
+ <tr>
+ <td style="vertical-align: top;"><span style="font-size: 8pt; font-family: Arial; color: blue;"><a href="../../../../../../Release_Notes.html">Back to Release page</a></span></td>
+ </tr>
+<tr style="">
+<td style="padding: 1.5pt;">
+<h1 style="margin-bottom: 18pt; text-align: center;" align="center"><span style="font-size: 20pt; font-family: Verdana; color: rgb(51, 102, 255);">Release
+Notes for STM32F10x CMSIS</span><span style="font-size: 20pt; font-family: Verdana;"><o:p></o:p></span></h1>
+<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt; font-family: Arial; color: black;">Copyright 2011 STMicroelectronics</span><span style="color: black;"><u1:p></u1:p><o:p></o:p></span></p>
+<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt; font-family: Arial; color: black;"><img alt="" id="_x0000_i1025" src="../../../../../../_htmresc/logo.bmp" style="border: 0px solid ; width: 86px; height: 65px;"></span><span style="font-size: 10pt;"><o:p></o:p></span></p>
+</td>
+</tr>
+</tbody>
+</table>
+<p class="MsoNormal"><span style="font-family: Arial; display: none;"><o:p> </o:p></span></p>
+<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" width="900">
+<tbody>
+<tr>
+<td style="padding: 0cm;" valign="top">
+<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><span style="font-size: 12pt; color: white;">Contents<o:p></o:p></span></h2>
+<ol style="margin-top: 0cm;" start="1" type="1">
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><a href="#History">STM32F10x CMSIS
+update History</a><o:p></o:p></span></li>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><a href="#License">License</a><o:p></o:p></span></li>
+</ol>
+<span style="font-family: "Times New Roman";"></span>
+<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="History"></a><span style="font-size: 12pt; color: white;">STM32F10x CMSIS
+update History</span></h2><br>
+ <h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 167px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V3.5.0 / 11-March-2011<o:p></o:p></span></h3>
+ <p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes<o:p></o:p></span></u></b></p>
+
+ <ul style="margin-top: 0cm;" type="square">
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">stm32f10x.h
+</span>and <span style="font-style: italic;">startup_stm32f10x_hd_vl.s</span> files: remove the FSMC interrupt
+definition for STM32F10x High-density Value line devices.<br>
+</span></li>
+ <li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">system_stm32f10x.c</span> file provided within the CMSIS folder. <br>
+</span></li>
+
+ </ul>
+
+ <h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 558.05pt;"><span style="font-size: 10pt; font-family: Arial; color: white;">3.4.0
+- 10/15/2010</span></h3>
+
+ <ol>
+<li><b><i><span style="font-size: 10pt; font-family: Verdana;">General</span></i></b></li>
+ </ol>
+
+ <ul style="margin-top: 0in;" type="disc">
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add support
+for <b>STM32F10x High-density Value line devices</b>.</span></li>
+ </ul>
+ <ol start="2">
+ <li><b><i><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS Device Peripheral Access Layer </span></i></b></li>
+ </ol>
+
+
+
+ <ul style="margin-top: 0in;" type="disc">
+<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File:</span> <span style="font-weight: bold; font-style: italic;">stm32f10x.h</span></span><br>
+ </li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update to support High-density Value line devices</span><span style="font-size: 10pt; font-family: Verdana;"></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new define <span style="font-style: italic;">STM32F10X_HD_VL</span></span></li>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">RCC, AFIO, FSMC bits definition updated</span></li>
+</ul>
+ <li class="MsoNormal" style="">
+
+ <span style="font-size: 10pt; font-family: "Verdana","sans-serif";">All
+STM32 devices definitions are commented by default. User has to select the
+appropriate device before starting else an error will be signaled on compile
+time.</span></li>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: "Verdana","sans-serif";">Add new IRQs definitons inside the IRQn_Type enumeration for STM23 High-density Value line devices.</span></li>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: "Verdana","sans-serif";">"<span style="font-weight: bold;">bool</span>" type removed.</span><br>
+ <span style="font-size: 10pt; font-family: "Verdana","sans-serif";"></span></li>
+</ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files:</span> <span style="font-weight: bold; font-style: italic;">system_stm32f10x.h and system_stm32f10x.c</span></span><br>
+ <span style="font-size: 10pt; font-family: Verdana;"></span></li>
+ <ul>
+<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;">"system_stm32f10x.c" </span><span style="font-weight: bold;"></span>moved to to "<span style="font-weight: bold; font-style: italic;">STM32F10x_StdPeriph_Template</span>" directory. This file is also moved to each example directory under "<span style="font-weight: bold; font-style: italic;">STM32F10x_StdPeriph_Examples</span>".</span><br>
+<span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;"></span></span></li>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">SystemInit_ExtMemCtl() </span>function: update to support High-density Value line devices.</span></li>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add "<span style="font-style: italic;">VECT_TAB_SRAM</span>" inside "</span><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;">system_stm32f10x.c</span></span><span style="font-size: 10pt; font-family: Verdana;">"
+to select if the user want to place the Vector Table in internal SRAM.
+An additional define is also to specify the Vector Table offset "<span style="font-style: italic;">VECT_TAB_OFFSET</span>".<br>
+ </span></li>
+
+ </ul>
+<li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS startup files:</span></span><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;">startup_stm32f10x_xx.s</span></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add three
+startup files for STM32 High-density Value line devices:
+ <span style="font-weight: bold; font-style: italic;">startup_stm32f10x_hd_vl.s</span></span></li></ul>
+ </ul>
+ <h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 558.05pt;"><span style="font-size: 10pt; font-family: Arial; color: white;">3.3.0
+- 04/16/2010</span></h3>
+
+<ol><li><b><i><span style="font-size: 10pt; font-family: Verdana;">General</span></i></b></li></ol>
+<ul style="margin-top: 0in;" type="disc"><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add support
+for <b>STM32F10x XL-density devices</b>.</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add startup files for TrueSTUDIO toolchain<br></span></li></ul><ol start="2"><li><b><i><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS Device Peripheral Access Layer </span></i></b></li></ol>
+
+ <ul style="margin-top: 0in;" type="disc"><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File:</span> <span style="font-weight: bold; font-style: italic;">stm32f10x.h</span></span><br>
+ </li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update to support XL-density devices</span><span style="font-size: 10pt; font-family: Verdana;"></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new define <span style="font-style: italic;">STM32F10X_XL</span></span></li></ul><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new IRQs for </span><span style="font-size: 10pt; font-family: Verdana;">TIM9..14</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update FLASH_TypeDef structure</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new IP instances TIM9..14</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">RCC, AFIO, DBGMCU bits definition updated</span></li></ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Correct IRQs definition for MD-, LD-, MD_VL- and LD_VL-density devices (remove comma "," at the end of enum list)<br></span></li></ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files:</span> <span style="font-weight: bold; font-style: italic;">system_stm32f10x.h and system_stm32f10x.c</span></span><br>
+ <span style="font-size: 10pt; font-family: Verdana;"></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">SystemInit_ExtMemCtl() </span>function: update to support XL-density devices</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">SystemInit()</span> function: swap the order of SetSysClock() and SystemInit_ExtMemCtl() functions. </span><span style="font-size: 10pt; font-family: Verdana;"><br>
+ </span></li></ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS startup files:</span><span style="font-weight: bold; font-style: italic;"></span><span style="font-style: italic;"><span style="font-weight: bold;"></span></span></span></li><ul><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">add three
+startup files for STM32 XL-density devices:
+ <span style="font-weight: bold; font-style: italic;">startup_stm32f10x_xl.s</span></span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold;">startup_stm32f10x_md_vl.s</span> for RIDE7: add USART3 IRQ Handler (was missing in previous version)</span></li><li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add startup files for TrueSTUDIO toolchain</span></li></ul></ul><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;"></span></span>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 558.05pt;"><span style="font-size: 10pt; font-family: Arial; color: white;">3.2.0
+- 03/01/2010</span></h3>
+<ol style="margin-top: 0in;" start="1" type="1">
+<li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">General</span></i></b><i><span style="font-size: 10pt; font-family: Verdana;"></span></i><i><span style="font-size: 10pt;"><o:p></o:p></span></i></li>
+</ol>
+<ul style="margin-top: 0in;" type="disc">
+
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS files updated to <span style="font-weight: bold;">CMSIS V1.30</span> release</span></li>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Directory structure updated to be aligned with CMSIS V1.30<br>
+ </span></li>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add support
+for <b>STM32 Low-density Value line (STM32F100x4/6) and
+Medium-density Value line (STM32F100x8/B) devices</b>. </span><span style="font-size: 10pt;"><o:p></o:p></span></li>
+
+</ul>
+<ol style="margin-top: 0in;" start="2" type="1">
+<li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">CMSIS Core Peripheral Access Layer</span></i></b></li></ol>
+ <ul>
+ <li><b><i><span style="font-size: 10pt; font-family: Verdana;"></span></i></b><span style="font-size: 10pt; font-family: Verdana;"> Refer to <a href="../../../CMSIS_changes.htm" target="_blank">CMSIS changes</a></span></li>
+ </ul>
+ <ol style="margin-top: 0in; list-style-type: decimal;" start="3">
+ <li class="MsoNormal" style=""><b><i><span style="font-size: 10pt; font-family: Verdana;">STM32F10x CMSIS Device Peripheral Access Layer </span></i></b><b><i><span style="font-size: 10pt;"><o:p></o:p></span></i></b></li>
+
+ </ol>
+
+ <ul style="margin-top: 0in;" type="disc">
+
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer Header File:</span> <span style="font-weight: bold; font-style: italic;">stm32f10x.h</span></span><br>
+ </li>
+ <ul>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Update
+the stm32f10x.h file to support new Value line devices features: CEC
+peripheral, new General purpose timers TIM15, TIM16 and TIM17.</span></li>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Peripherals Bits definitions updated to be in line with Value line devices available features.<br>
+ </span></li>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">HSE_Value,
+HSI_Value and HSEStartup_TimeOut changed to upper case: HSE_VALUE,
+HSI_VALUE and HSE_STARTUP_TIMEOUT. Old names are kept for legacy
+purposes.<br>
+ </span></li>
+ </ul>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Cortex-M3 Device Peripheral Access Layer System Files:</span> <span style="font-weight: bold; font-style: italic;">system_stm32f10x.h and system_stm32f10x.c</span></span><br>
+ <span style="font-size: 10pt; font-family: Verdana;"></span></li>
+ <ul>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">SystemFrequency variable name changed to SystemCoreClock</span><br>
+ <span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;"></span></span></li>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">Default
+ </span></span><span style="font-size: 10pt; font-family: Verdana;">SystemCoreClock</span><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;"> is changed to 24MHz when Value line devices are selected and to 72MHz on other devices.</span></span><span style="font-size: 10pt;"><o:p></o:p></span><span style="font-size: 10pt; font-family: Verdana;"> <br>
+ </span></li>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">All while(1) loop were removed from all clock setting functions. User has to handle the HSE startup failure.<br>
+ </span></li>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Additional function <span style="font-weight: bold; font-style: italic;">void SystemCoreClockUpdate (void)</span> is provided.<br>
+ </span></li>
+ </ul>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;">STM32F10x CMSIS Startup files:</span> <span style="font-weight: bold; font-style: italic;">startup_stm32f10x_xx.s</span></span></li>
+ <ul>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new
+startup files for STM32 Low-density Value line devices:
+ <span style="font-weight: bold; font-style: italic;">startup_stm32f10x_ld_vl.s</span></span></li>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">Add new startup
+files for STM32 Medium-density Value line devices:
+ <span style="font-weight: bold; font-style: italic;">startup_stm32f10x_md_vl.s</span></span></li>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">SystemInit() function is called from startup file (startup_stm32f10x_xx.s) before to branch to application main.<br>
+To reconfigure the default setting of SystemInit() function, refer to system_stm32f10x.c file <br>
+</span></li>
+ <li class="MsoNormal" style=""><span style="font-size: 10pt; font-family: Verdana;">GNU startup file for Low density devices (startup_stm32f10x_ld.s) is updated to fix compilation errors.<br>
+</span></li>
+ </ul>
+
+ </ul>
+
+<ul style="margin-top: 0in;" type="disc">
+</ul>
+<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="License"></a><span style="font-size: 12pt; color: white;">License<o:p></o:p></span></h2>
+<p class="MsoNormal" style="margin: 4.5pt 0cm;"><span style="font-size: 10pt; font-family: Verdana; color: black;">The
+enclosed firmware and all the related documentation are not covered by
+a License Agreement, if you need such License you can contact your
+local STMicroelectronics office.<u1:p></u1:p><o:p></o:p></span></p>
+<p class="MsoNormal"><b style=""><span style="font-size: 10pt; font-family: Verdana; color: black;">THE
+PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO
+SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR
+ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY
+CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY
+CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH
+THEIR PRODUCTS. <o:p></o:p></span></b></p>
+<p class="MsoNormal"><span style="color: black;"><o:p> </o:p></span></p>
+<div class="MsoNormal" style="text-align: center;" align="center"><span style="color: black;">
+<hr align="center" size="2" width="100%"></span></div>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt; text-align: center;" align="center"><span style="font-size: 10pt; font-family: Verdana; color: black;">For
+complete documentation on </span><span style="font-size: 10pt; font-family: Verdana;">STM32(<span style="color: black;">CORTEX M3) 32-Bit Microcontrollers
+visit </span><u><span style="color: blue;"><a href="http://www.st.com/stm32" target="_blank">www.st.com/STM32</a></span></u></span><span style="color: black;"><o:p></o:p></span></p>
+</td>
+</tr>
+</tbody>
+</table>
+<p class="MsoNormal"><span style="font-size: 10pt;"><o:p></o:p></span></p>
+</td>
+</tr>
+</tbody>
+</table>
+</div>
+<p class="MsoNormal"><o:p> </o:p></p>
+</div>
+</body></html>
\ No newline at end of file
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_cl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_cl.s
new file mode 100644
index 0000000..e34a520
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_cl.s
@@ -0,0 +1,473 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_cl.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x Connectivity line Devices vector table for Atollic
+ * toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR
+ * address.
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF1E0F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_2_IRQHandler
+ .word CAN1_TX_IRQHandler
+ .word CAN1_RX0_IRQHandler
+ .word CAN1_RX1_IRQHandler
+ .word CAN1_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_IRQHandler
+ .word TIM1_UP_IRQHandler
+ .word TIM1_TRG_COM_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word OTG_FS_WKUP_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word TIM5_IRQHandler
+ .word SPI3_IRQHandler
+ .word UART4_IRQHandler
+ .word UART5_IRQHandler
+ .word TIM6_IRQHandler
+ .word TIM7_IRQHandler
+ .word DMA2_Channel1_IRQHandler
+ .word DMA2_Channel2_IRQHandler
+ .word DMA2_Channel3_IRQHandler
+ .word DMA2_Channel4_IRQHandler
+ .word DMA2_Channel5_IRQHandler
+ .word ETH_IRQHandler
+ .word ETH_WKUP_IRQHandler
+ .word CAN2_TX_IRQHandler
+ .word CAN2_RX0_IRQHandler
+ .word CAN2_RX1_IRQHandler
+ .word CAN2_SCE_IRQHandler
+ .word OTG_FS_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x1E0. This is for boot in RAM mode for
+ STM32F10x Connectivity line Devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_2_IRQHandler
+ .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+ .weak CAN1_TX_IRQHandler
+ .thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+ .weak CAN1_RX0_IRQHandler
+ .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_IRQHandler
+ .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_IRQHandler
+ .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_IRQHandler
+ .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak OTG_FS_WKUP_IRQHandler
+ .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+
+ .weak TIM5_IRQHandler
+ .thumb_set TIM5_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak UART4_IRQHandler
+ .thumb_set UART4_IRQHandler,Default_Handler
+
+ .weak UART5_IRQHandler
+ .thumb_set UART5_IRQHandler,Default_Handler
+
+ .weak TIM6_IRQHandler
+ .thumb_set TIM6_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel1_IRQHandler
+ .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel2_IRQHandler
+ .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel3_IRQHandler
+ .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel4_IRQHandler
+ .thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel5_IRQHandler
+ .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+ .weak ETH_IRQHandler
+ .thumb_set ETH_IRQHandler,Default_Handler
+
+ .weak ETH_WKUP_IRQHandler
+ .thumb_set ETH_WKUP_IRQHandler,Default_Handler
+
+ .weak CAN2_TX_IRQHandler
+ .thumb_set CAN2_TX_IRQHandler,Default_Handler
+
+ .weak CAN2_RX0_IRQHandler
+ .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+
+ .weak CAN2_RX1_IRQHandler
+ .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+
+ .weak CAN2_SCE_IRQHandler
+ .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+
+ .weak OTG_FS_IRQHandler
+ .thumb_set OTG_FS_IRQHandler ,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd.s
new file mode 100644
index 0000000..0aa9188
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd.s
@@ -0,0 +1,469 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_hd.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x High Density Devices vector table for Atollic toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address,
+ * - Configure the clock system
+ * - Configure external SRAM mounted on STM3210E-EVAL board
+ * to be used as data memory (optional, to be enabled by user)
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF1E0F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_2_IRQHandler
+ .word USB_HP_CAN1_TX_IRQHandler
+ .word USB_LP_CAN1_RX0_IRQHandler
+ .word CAN1_RX1_IRQHandler
+ .word CAN1_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_IRQHandler
+ .word TIM1_UP_IRQHandler
+ .word TIM1_TRG_COM_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word USBWakeUp_IRQHandler
+ .word TIM8_BRK_IRQHandler
+ .word TIM8_UP_IRQHandler
+ .word TIM8_TRG_COM_IRQHandler
+ .word TIM8_CC_IRQHandler
+ .word ADC3_IRQHandler
+ .word FSMC_IRQHandler
+ .word SDIO_IRQHandler
+ .word TIM5_IRQHandler
+ .word SPI3_IRQHandler
+ .word UART4_IRQHandler
+ .word UART5_IRQHandler
+ .word TIM6_IRQHandler
+ .word TIM7_IRQHandler
+ .word DMA2_Channel1_IRQHandler
+ .word DMA2_Channel2_IRQHandler
+ .word DMA2_Channel3_IRQHandler
+ .word DMA2_Channel4_5_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x1E0. This is for boot in RAM mode for
+ STM32F10x High Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_2_IRQHandler
+ .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+ .weak USB_HP_CAN1_TX_IRQHandler
+ .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+ .weak USB_LP_CAN1_RX0_IRQHandler
+ .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_IRQHandler
+ .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_IRQHandler
+ .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_IRQHandler
+ .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak USBWakeUp_IRQHandler
+ .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+ .weak TIM8_BRK_IRQHandler
+ .thumb_set TIM8_BRK_IRQHandler,Default_Handler
+
+ .weak TIM8_UP_IRQHandler
+ .thumb_set TIM8_UP_IRQHandler,Default_Handler
+
+ .weak TIM8_TRG_COM_IRQHandler
+ .thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM8_CC_IRQHandler
+ .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+ .weak ADC3_IRQHandler
+ .thumb_set ADC3_IRQHandler,Default_Handler
+
+ .weak FSMC_IRQHandler
+ .thumb_set FSMC_IRQHandler,Default_Handler
+
+ .weak SDIO_IRQHandler
+ .thumb_set SDIO_IRQHandler,Default_Handler
+
+ .weak TIM5_IRQHandler
+ .thumb_set TIM5_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak UART4_IRQHandler
+ .thumb_set UART4_IRQHandler,Default_Handler
+
+ .weak UART5_IRQHandler
+ .thumb_set UART5_IRQHandler,Default_Handler
+
+ .weak TIM6_IRQHandler
+ .thumb_set TIM6_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel1_IRQHandler
+ .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel2_IRQHandler
+ .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel3_IRQHandler
+ .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel4_5_IRQHandler
+ .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd_vl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd_vl.s
new file mode 100644
index 0000000..55aa398
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_hd_vl.s
@@ -0,0 +1,451 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_hd_vl.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x High Density Value Line Devices vector table for Atollic
+ * toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system
+ * - Configure external SRAM mounted on STM32100E-EVAL board
+ * to be used as data memory (optional, to be enabled by user)
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF108F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_TIM15_IRQHandler
+ .word TIM1_UP_TIM16_IRQHandler
+ .word TIM1_TRG_COM_TIM17_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word CEC_IRQHandler
+ .word TIM12_IRQHandler
+ .word TIM13_IRQHandler
+ .word TIM14_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word TIM5_IRQHandler
+ .word SPI3_IRQHandler
+ .word UART4_IRQHandler
+ .word UART5_IRQHandler
+ .word TIM6_DAC_IRQHandler
+ .word TIM7_IRQHandler
+ .word DMA2_Channel1_IRQHandler
+ .word DMA2_Channel2_IRQHandler
+ .word DMA2_Channel3_IRQHandler
+ .word DMA2_Channel4_5_IRQHandler
+ .word DMA2_Channel5_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x1E0. This is for boot in RAM mode for
+ STM32F10x High Density Value line devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM15_IRQHandler
+ .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM16_IRQHandler
+ .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_TIM17_IRQHandler
+ .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak CEC_IRQHandler
+ .thumb_set CEC_IRQHandler,Default_Handler
+
+ .weak TIM12_IRQHandler
+ .thumb_set TIM12_IRQHandler,Default_Handler
+
+ .weak TIM13_IRQHandler
+ .thumb_set TIM13_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM5_IRQHandler
+ .thumb_set TIM5_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak UART4_IRQHandler
+ .thumb_set UART4_IRQHandler,Default_Handler
+
+ .weak UART5_IRQHandler
+ .thumb_set UART5_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel1_IRQHandler
+ .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel2_IRQHandler
+ .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel3_IRQHandler
+ .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel4_5_IRQHandler
+ .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel5_IRQHandler
+ .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld.s
new file mode 100644
index 0000000..2c5aaa0
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld.s
@@ -0,0 +1,347 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_ld.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x Low Density Devices vector table for Atollic toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address.
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF108F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_2_IRQHandler
+ .word USB_HP_CAN1_TX_IRQHandler
+ .word USB_LP_CAN1_RX0_IRQHandler
+ .word CAN1_RX1_IRQHandler
+ .word CAN1_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_IRQHandler
+ .word TIM1_UP_IRQHandler
+ .word TIM1_TRG_COM_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word 0
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word 0
+ .word 0
+ .word SPI1_IRQHandler
+ .word 0
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word 0
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word USBWakeUp_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x108. This is for boot in RAM mode for
+ STM32F10x Low Density devices.*/
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_2_IRQHandler
+ .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+ .weak USB_HP_CAN1_TX_IRQHandler
+ .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+ .weak USB_LP_CAN1_RX0_IRQHandler
+ .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_IRQHandler
+ .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_IRQHandler
+ .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_IRQHandler
+ .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak USBWakeUp_IRQHandler
+ .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld_vl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld_vl.s
new file mode 100644
index 0000000..9af6e8b
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_ld_vl.s
@@ -0,0 +1,392 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_ld_vl.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x Low Density Value Line Devices vector table for Atollic toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF108F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_TIM15_IRQHandler
+ .word TIM1_UP_TIM16_IRQHandler
+ .word TIM1_TRG_COM_TIM17_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word 0
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word 0
+ .word 0
+ .word SPI1_IRQHandler
+ .word 0
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word 0
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word CEC_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word TIM6_DAC_IRQHandler
+ .word TIM7_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x01CC. This is for boot in RAM mode for
+ STM32F10x Medium Value Line Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM15_IRQHandler
+ .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM16_IRQHandler
+ .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_TIM17_IRQHandler
+ .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak CEC_IRQHandler
+ .thumb_set CEC_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md.s
new file mode 100644
index 0000000..c14ba21
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md.s
@@ -0,0 +1,363 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_md.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x Medium Density Devices vector table for Atollic toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF108F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_2_IRQHandler
+ .word USB_HP_CAN1_TX_IRQHandler
+ .word USB_LP_CAN1_RX0_IRQHandler
+ .word CAN1_RX1_IRQHandler
+ .word CAN1_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_IRQHandler
+ .word TIM1_UP_IRQHandler
+ .word TIM1_TRG_COM_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word USBWakeUp_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x108. This is for boot in RAM mode for
+ STM32F10x Medium Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_2_IRQHandler
+ .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+ .weak USB_HP_CAN1_TX_IRQHandler
+ .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+ .weak USB_LP_CAN1_RX0_IRQHandler
+ .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_IRQHandler
+ .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_IRQHandler
+ .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_IRQHandler
+ .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak USBWakeUp_IRQHandler
+ .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md_vl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md_vl.s
new file mode 100644
index 0000000..4ac1230
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_md_vl.s
@@ -0,0 +1,408 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_md_vl.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x Medium Density Value Line Devices vector table for Atollic
+ * toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF108F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ *
+ * @param None
+ * @retval : None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_TIM15_IRQHandler
+ .word TIM1_UP_TIM16_IRQHandler
+ .word TIM1_TRG_COM_TIM17_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word CEC_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word TIM6_DAC_IRQHandler
+ .word TIM7_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x01CC. This is for boot in RAM mode for
+ STM32F10x Medium Value Line Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM15_IRQHandler
+ .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM16_IRQHandler
+ .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_TIM17_IRQHandler
+ .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak CEC_IRQHandler
+ .thumb_set CEC_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_xl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_xl.s
new file mode 100644
index 0000000..19bdf5a
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/TrueSTUDIO/startup_stm32f10x_xl.s
@@ -0,0 +1,467 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_xl.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x XL-Density Devices vector table for TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system and the external SRAM mounted on
+ * STM3210E-EVAL board to be used as data memory (optional,
+ * to be enabled by user)
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF1E0F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ * @param None
+ * @retval None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+*******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_2_IRQHandler
+ .word USB_HP_CAN1_TX_IRQHandler
+ .word USB_LP_CAN1_RX0_IRQHandler
+ .word CAN1_RX1_IRQHandler
+ .word CAN1_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_TIM9_IRQHandler
+ .word TIM1_UP_TIM10_IRQHandler
+ .word TIM1_TRG_COM_TIM11_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word USBWakeUp_IRQHandler
+ .word TIM8_BRK_TIM12_IRQHandler
+ .word TIM8_UP_TIM13_IRQHandler
+ .word TIM8_TRG_COM_TIM14_IRQHandler
+ .word TIM8_CC_IRQHandler
+ .word ADC3_IRQHandler
+ .word FSMC_IRQHandler
+ .word SDIO_IRQHandler
+ .word TIM5_IRQHandler
+ .word SPI3_IRQHandler
+ .word UART4_IRQHandler
+ .word UART5_IRQHandler
+ .word TIM6_IRQHandler
+ .word TIM7_IRQHandler
+ .word DMA2_Channel1_IRQHandler
+ .word DMA2_Channel2_IRQHandler
+ .word DMA2_Channel3_IRQHandler
+ .word DMA2_Channel4_5_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x1E0. This is for boot in RAM mode for
+ STM32F10x XL-Density devices. */
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_2_IRQHandler
+ .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+ .weak USB_HP_CAN1_TX_IRQHandler
+ .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+ .weak USB_LP_CAN1_RX0_IRQHandler
+ .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM9_IRQHandler
+ .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM10_IRQHandler
+ .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_TIM11_IRQHandler
+ .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak USBWakeUp_IRQHandler
+ .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+ .weak TIM8_BRK_TIM12_IRQHandler
+ .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
+
+ .weak TIM8_UP_TIM13_IRQHandler
+ .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
+
+ .weak TIM8_TRG_COM_TIM14_IRQHandler
+ .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
+
+ .weak TIM8_CC_IRQHandler
+ .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+ .weak ADC3_IRQHandler
+ .thumb_set ADC3_IRQHandler,Default_Handler
+
+ .weak FSMC_IRQHandler
+ .thumb_set FSMC_IRQHandler,Default_Handler
+
+ .weak SDIO_IRQHandler
+ .thumb_set SDIO_IRQHandler,Default_Handler
+
+ .weak TIM5_IRQHandler
+ .thumb_set TIM5_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak UART4_IRQHandler
+ .thumb_set UART4_IRQHandler,Default_Handler
+
+ .weak UART5_IRQHandler
+ .thumb_set UART5_IRQHandler,Default_Handler
+
+ .weak TIM6_IRQHandler
+ .thumb_set TIM6_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel1_IRQHandler
+ .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel2_IRQHandler
+ .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel3_IRQHandler
+ .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel4_5_IRQHandler
+ .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_cl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_cl.s
new file mode 100644
index 0000000..8196e69
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_cl.s
@@ -0,0 +1,368 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name : startup_stm32f10x_cl.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x Connectivity line devices vector table for MDK-ARM
+;* toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Configure the clock system
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_2_IRQHandler ; ADC1 and ADC2
+ DCD CAN1_TX_IRQHandler ; CAN1 TX
+ DCD CAN1_RX0_IRQHandler ; CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_IRQHandler ; TIM1 Break
+ DCD TIM1_UP_IRQHandler ; TIM1 Update
+ DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C1 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC alarm through EXTI line
+ DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD UART4_IRQHandler ; UART4
+ DCD UART5_IRQHandler ; UART5
+ DCD TIM6_IRQHandler ; TIM6
+ DCD TIM7_IRQHandler ; TIM7
+ DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
+ DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
+ DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
+ DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4
+ DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
+ DCD ETH_IRQHandler ; Ethernet
+ DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
+ DCD CAN2_TX_IRQHandler ; CAN2 TX
+ DCD CAN2_RX0_IRQHandler ; CAN2 RX0
+ DCD CAN2_RX1_IRQHandler ; CAN2 RX1
+ DCD CAN2_SCE_IRQHandler ; CAN2 SCE
+ DCD OTG_FS_IRQHandler ; USB OTG FS
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMPER_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_IRQHandler [WEAK]
+ EXPORT DMA1_Channel3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel5_IRQHandler [WEAK]
+ EXPORT DMA1_Channel6_IRQHandler [WEAK]
+ EXPORT DMA1_Channel7_IRQHandler [WEAK]
+ EXPORT ADC1_2_IRQHandler [WEAK]
+ EXPORT CAN1_TX_IRQHandler [WEAK]
+ EXPORT CAN1_RX0_IRQHandler [WEAK]
+ EXPORT CAN1_RX1_IRQHandler [WEAK]
+ EXPORT CAN1_SCE_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_IRQHandler [WEAK]
+ EXPORT TIM1_UP_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM4_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTCAlarm_IRQHandler [WEAK]
+ EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
+ EXPORT TIM5_IRQHandler [WEAK]
+ EXPORT SPI3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT UART5_IRQHandler [WEAK]
+ EXPORT TIM6_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT DMA2_Channel1_IRQHandler [WEAK]
+ EXPORT DMA2_Channel2_IRQHandler [WEAK]
+ EXPORT DMA2_Channel3_IRQHandler [WEAK]
+ EXPORT DMA2_Channel4_IRQHandler [WEAK]
+ EXPORT DMA2_Channel5_IRQHandler [WEAK]
+ EXPORT ETH_IRQHandler [WEAK]
+ EXPORT ETH_WKUP_IRQHandler [WEAK]
+ EXPORT CAN2_TX_IRQHandler [WEAK]
+ EXPORT CAN2_RX0_IRQHandler [WEAK]
+ EXPORT CAN2_RX1_IRQHandler [WEAK]
+ EXPORT CAN2_SCE_IRQHandler [WEAK]
+ EXPORT OTG_FS_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+CAN1_TX_IRQHandler
+CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+OTG_FS_WKUP_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_IRQHandler
+DMA2_Channel5_IRQHandler
+ETH_IRQHandler
+ETH_WKUP_IRQHandler
+CAN2_TX_IRQHandler
+CAN2_RX0_IRQHandler
+CAN2_RX1_IRQHandler
+CAN2_SCE_IRQHandler
+OTG_FS_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd.s
new file mode 100644
index 0000000..adc9b94
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd.s
@@ -0,0 +1,358 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name : startup_stm32f10x_hd.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x High Density Devices vector table for MDK-ARM
+;* toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Configure the clock system and also configure the external
+;* SRAM mounted on STM3210E-EVAL board to be used as data
+;* memory (optional, to be enabled by user)
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_2_IRQHandler ; ADC1 & ADC2
+ DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
+ DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_IRQHandler ; TIM1 Break
+ DCD TIM1_UP_IRQHandler ; TIM1 Update
+ DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
+ DCD TIM8_BRK_IRQHandler ; TIM8 Break
+ DCD TIM8_UP_IRQHandler ; TIM8 Update
+ DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation
+ DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
+ DCD ADC3_IRQHandler ; ADC3
+ DCD FSMC_IRQHandler ; FSMC
+ DCD SDIO_IRQHandler ; SDIO
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD UART4_IRQHandler ; UART4
+ DCD UART5_IRQHandler ; UART5
+ DCD TIM6_IRQHandler ; TIM6
+ DCD TIM7_IRQHandler ; TIM7
+ DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
+ DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
+ DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
+ DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMPER_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_IRQHandler [WEAK]
+ EXPORT DMA1_Channel3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel5_IRQHandler [WEAK]
+ EXPORT DMA1_Channel6_IRQHandler [WEAK]
+ EXPORT DMA1_Channel7_IRQHandler [WEAK]
+ EXPORT ADC1_2_IRQHandler [WEAK]
+ EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
+ EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
+ EXPORT CAN1_RX1_IRQHandler [WEAK]
+ EXPORT CAN1_SCE_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_IRQHandler [WEAK]
+ EXPORT TIM1_UP_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM4_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTCAlarm_IRQHandler [WEAK]
+ EXPORT USBWakeUp_IRQHandler [WEAK]
+ EXPORT TIM8_BRK_IRQHandler [WEAK]
+ EXPORT TIM8_UP_IRQHandler [WEAK]
+ EXPORT TIM8_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM8_CC_IRQHandler [WEAK]
+ EXPORT ADC3_IRQHandler [WEAK]
+ EXPORT FSMC_IRQHandler [WEAK]
+ EXPORT SDIO_IRQHandler [WEAK]
+ EXPORT TIM5_IRQHandler [WEAK]
+ EXPORT SPI3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT UART5_IRQHandler [WEAK]
+ EXPORT TIM6_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT DMA2_Channel1_IRQHandler [WEAK]
+ EXPORT DMA2_Channel2_IRQHandler [WEAK]
+ EXPORT DMA2_Channel3_IRQHandler [WEAK]
+ EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+USB_HP_CAN1_TX_IRQHandler
+USB_LP_CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+USBWakeUp_IRQHandler
+TIM8_BRK_IRQHandler
+TIM8_UP_IRQHandler
+TIM8_TRG_COM_IRQHandler
+TIM8_CC_IRQHandler
+ADC3_IRQHandler
+FSMC_IRQHandler
+SDIO_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_5_IRQHandler
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd_vl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd_vl.s
new file mode 100644
index 0000000..d6082b0
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_hd_vl.s
@@ -0,0 +1,346 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name : startup_stm32f10x_hd_vl.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x High Density Value Line Devices vector table
+;* for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Configure the clock system and also configure the external
+;* SRAM mounted on STM32100E-EVAL board to be used as data
+;* memory (optional, to be enabled by user)
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_IRQHandler ; ADC1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
+ DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
+ DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD CEC_IRQHandler ; HDMI-CEC
+ DCD TIM12_IRQHandler ; TIM12
+ DCD TIM13_IRQHandler ; TIM13
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD UART4_IRQHandler ; UART4
+ DCD UART5_IRQHandler ; UART5
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
+ DCD TIM7_IRQHandler ; TIM7
+ DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
+ DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
+ DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
+ DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
+ DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMPER_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_IRQHandler [WEAK]
+ EXPORT DMA1_Channel3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel5_IRQHandler [WEAK]
+ EXPORT DMA1_Channel6_IRQHandler [WEAK]
+ EXPORT DMA1_Channel7_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
+ EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM4_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTCAlarm_IRQHandler [WEAK]
+ EXPORT CEC_IRQHandler [WEAK]
+ EXPORT TIM12_IRQHandler [WEAK]
+ EXPORT TIM13_IRQHandler [WEAK]
+ EXPORT TIM14_IRQHandler [WEAK]
+ EXPORT TIM5_IRQHandler [WEAK]
+ EXPORT SPI3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT UART5_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT DMA2_Channel1_IRQHandler [WEAK]
+ EXPORT DMA2_Channel2_IRQHandler [WEAK]
+ EXPORT DMA2_Channel3_IRQHandler [WEAK]
+ EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
+ EXPORT DMA2_Channel5_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM15_IRQHandler
+TIM1_UP_TIM16_IRQHandler
+TIM1_TRG_COM_TIM17_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+CEC_IRQHandler
+TIM12_IRQHandler
+TIM13_IRQHandler
+TIM14_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_5_IRQHandler
+DMA2_Channel5_IRQHandler
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld.s
new file mode 100644
index 0000000..3f3ac2f
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld.s
@@ -0,0 +1,297 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name : startup_stm32f10x_ld.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x Low Density Devices vector table for MDK-ARM
+;* toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Configure the clock system
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_2_IRQHandler ; ADC1_2
+ DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
+ DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_IRQHandler ; TIM1 Break
+ DCD TIM1_UP_IRQHandler ; TIM1 Update
+ DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMPER_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_IRQHandler [WEAK]
+ EXPORT DMA1_Channel3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel5_IRQHandler [WEAK]
+ EXPORT DMA1_Channel6_IRQHandler [WEAK]
+ EXPORT DMA1_Channel7_IRQHandler [WEAK]
+ EXPORT ADC1_2_IRQHandler [WEAK]
+ EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
+ EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
+ EXPORT CAN1_RX1_IRQHandler [WEAK]
+ EXPORT CAN1_SCE_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_IRQHandler [WEAK]
+ EXPORT TIM1_UP_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTCAlarm_IRQHandler [WEAK]
+ EXPORT USBWakeUp_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+USB_HP_CAN1_TX_IRQHandler
+USB_LP_CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+USBWakeUp_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld_vl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld_vl.s
new file mode 100644
index 0000000..fe22fc0
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_ld_vl.s
@@ -0,0 +1,304 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name : startup_stm32f10x_ld_vl.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x Low Density Value Line Devices vector table
+;* for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Configure the clock system
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_IRQHandler ; ADC1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
+ DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
+ DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD CEC_IRQHandler ; HDMI-CEC
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
+ DCD TIM7_IRQHandler ; TIM7
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMPER_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_IRQHandler [WEAK]
+ EXPORT DMA1_Channel3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel5_IRQHandler [WEAK]
+ EXPORT DMA1_Channel6_IRQHandler [WEAK]
+ EXPORT DMA1_Channel7_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
+ EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTCAlarm_IRQHandler [WEAK]
+ EXPORT CEC_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM15_IRQHandler
+TIM1_UP_TIM16_IRQHandler
+TIM1_TRG_COM_TIM17_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+SPI1_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+CEC_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md.s
new file mode 100644
index 0000000..3223fc9
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md.s
@@ -0,0 +1,307 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name : startup_stm32f10x_md.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x Medium Density Devices vector table for MDK-ARM
+;* toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Configure the clock system
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_2_IRQHandler ; ADC1_2
+ DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
+ DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_IRQHandler ; TIM1 Break
+ DCD TIM1_UP_IRQHandler ; TIM1 Update
+ DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMPER_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_IRQHandler [WEAK]
+ EXPORT DMA1_Channel3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel5_IRQHandler [WEAK]
+ EXPORT DMA1_Channel6_IRQHandler [WEAK]
+ EXPORT DMA1_Channel7_IRQHandler [WEAK]
+ EXPORT ADC1_2_IRQHandler [WEAK]
+ EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
+ EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
+ EXPORT CAN1_RX1_IRQHandler [WEAK]
+ EXPORT CAN1_SCE_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_IRQHandler [WEAK]
+ EXPORT TIM1_UP_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM4_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTCAlarm_IRQHandler [WEAK]
+ EXPORT USBWakeUp_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+USB_HP_CAN1_TX_IRQHandler
+USB_LP_CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_IRQHandler
+TIM1_UP_IRQHandler
+TIM1_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+USBWakeUp_IRQHandler
+
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md_vl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md_vl.s
new file mode 100644
index 0000000..d3b8aa6
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_md_vl.s
@@ -0,0 +1,315 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name : startup_stm32f10x_md_vl.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x Medium Density Value Line Devices vector table
+;* for MDK-ARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Configure the clock system
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_IRQHandler ; ADC1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
+ DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
+ DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD CEC_IRQHandler ; HDMI-CEC
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
+ DCD TIM7_IRQHandler ; TIM7
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMPER_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_IRQHandler [WEAK]
+ EXPORT DMA1_Channel3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel5_IRQHandler [WEAK]
+ EXPORT DMA1_Channel6_IRQHandler [WEAK]
+ EXPORT DMA1_Channel7_IRQHandler [WEAK]
+ EXPORT ADC1_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
+ EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM4_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTCAlarm_IRQHandler [WEAK]
+ EXPORT CEC_IRQHandler [WEAK]
+ EXPORT TIM6_DAC_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM15_IRQHandler
+TIM1_UP_TIM16_IRQHandler
+TIM1_TRG_COM_TIM17_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+CEC_IRQHandler
+TIM6_DAC_IRQHandler
+TIM7_IRQHandler
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_xl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_xl.s
new file mode 100644
index 0000000..7970052
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/arm/startup_stm32f10x_xl.s
@@ -0,0 +1,358 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name : startup_stm32f10x_xl.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x XL-Density Devices vector table for MDK-ARM
+;* toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Set the initial PC == Reset_Handler
+;* - Set the vector table entries with the exceptions ISR address
+;* - Configure the clock system and also configure the external
+;* SRAM mounted on STM3210E-EVAL board to be used as data
+;* memory (optional, to be enabled by user)
+;* - Branches to __main in the C library (which eventually
+;* calls main()).
+;* After Reset the CortexM3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;*******************************************************************************
+; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size EQU 0x00000400
+
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+; <h> Heap Configuration
+; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size EQU 0x00000200
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_2_IRQHandler ; ADC1 & ADC2
+ DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
+ DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
+ DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
+ DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
+ DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
+ DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
+ DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
+ DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
+ DCD ADC3_IRQHandler ; ADC3
+ DCD FSMC_IRQHandler ; FSMC
+ DCD SDIO_IRQHandler ; SDIO
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD UART4_IRQHandler ; UART4
+ DCD UART5_IRQHandler ; UART5
+ DCD TIM6_IRQHandler ; TIM6
+ DCD TIM7_IRQHandler ; TIM7
+ DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
+ DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
+ DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
+ DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT __main
+ IMPORT SystemInit
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+MemManage_Handler\
+ PROC
+ EXPORT MemManage_Handler [WEAK]
+ B .
+ ENDP
+BusFault_Handler\
+ PROC
+ EXPORT BusFault_Handler [WEAK]
+ B .
+ ENDP
+UsageFault_Handler\
+ PROC
+ EXPORT UsageFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+DebugMon_Handler\
+ PROC
+ EXPORT DebugMon_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMPER_IRQHandler [WEAK]
+ EXPORT RTC_IRQHandler [WEAK]
+ EXPORT FLASH_IRQHandler [WEAK]
+ EXPORT RCC_IRQHandler [WEAK]
+ EXPORT EXTI0_IRQHandler [WEAK]
+ EXPORT EXTI1_IRQHandler [WEAK]
+ EXPORT EXTI2_IRQHandler [WEAK]
+ EXPORT EXTI3_IRQHandler [WEAK]
+ EXPORT EXTI4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel1_IRQHandler [WEAK]
+ EXPORT DMA1_Channel2_IRQHandler [WEAK]
+ EXPORT DMA1_Channel3_IRQHandler [WEAK]
+ EXPORT DMA1_Channel4_IRQHandler [WEAK]
+ EXPORT DMA1_Channel5_IRQHandler [WEAK]
+ EXPORT DMA1_Channel6_IRQHandler [WEAK]
+ EXPORT DMA1_Channel7_IRQHandler [WEAK]
+ EXPORT ADC1_2_IRQHandler [WEAK]
+ EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
+ EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
+ EXPORT CAN1_RX1_IRQHandler [WEAK]
+ EXPORT CAN1_SCE_IRQHandler [WEAK]
+ EXPORT EXTI9_5_IRQHandler [WEAK]
+ EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
+ EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
+ EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
+ EXPORT TIM1_CC_IRQHandler [WEAK]
+ EXPORT TIM2_IRQHandler [WEAK]
+ EXPORT TIM3_IRQHandler [WEAK]
+ EXPORT TIM4_IRQHandler [WEAK]
+ EXPORT I2C1_EV_IRQHandler [WEAK]
+ EXPORT I2C1_ER_IRQHandler [WEAK]
+ EXPORT I2C2_EV_IRQHandler [WEAK]
+ EXPORT I2C2_ER_IRQHandler [WEAK]
+ EXPORT SPI1_IRQHandler [WEAK]
+ EXPORT SPI2_IRQHandler [WEAK]
+ EXPORT USART1_IRQHandler [WEAK]
+ EXPORT USART2_IRQHandler [WEAK]
+ EXPORT USART3_IRQHandler [WEAK]
+ EXPORT EXTI15_10_IRQHandler [WEAK]
+ EXPORT RTCAlarm_IRQHandler [WEAK]
+ EXPORT USBWakeUp_IRQHandler [WEAK]
+ EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
+ EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
+ EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
+ EXPORT TIM8_CC_IRQHandler [WEAK]
+ EXPORT ADC3_IRQHandler [WEAK]
+ EXPORT FSMC_IRQHandler [WEAK]
+ EXPORT SDIO_IRQHandler [WEAK]
+ EXPORT TIM5_IRQHandler [WEAK]
+ EXPORT SPI3_IRQHandler [WEAK]
+ EXPORT UART4_IRQHandler [WEAK]
+ EXPORT UART5_IRQHandler [WEAK]
+ EXPORT TIM6_IRQHandler [WEAK]
+ EXPORT TIM7_IRQHandler [WEAK]
+ EXPORT DMA2_Channel1_IRQHandler [WEAK]
+ EXPORT DMA2_Channel2_IRQHandler [WEAK]
+ EXPORT DMA2_Channel3_IRQHandler [WEAK]
+ EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
+
+WWDG_IRQHandler
+PVD_IRQHandler
+TAMPER_IRQHandler
+RTC_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_IRQHandler
+EXTI1_IRQHandler
+EXTI2_IRQHandler
+EXTI3_IRQHandler
+EXTI4_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_IRQHandler
+DMA1_Channel3_IRQHandler
+DMA1_Channel4_IRQHandler
+DMA1_Channel5_IRQHandler
+DMA1_Channel6_IRQHandler
+DMA1_Channel7_IRQHandler
+ADC1_2_IRQHandler
+USB_HP_CAN1_TX_IRQHandler
+USB_LP_CAN1_RX0_IRQHandler
+CAN1_RX1_IRQHandler
+CAN1_SCE_IRQHandler
+EXTI9_5_IRQHandler
+TIM1_BRK_TIM9_IRQHandler
+TIM1_UP_TIM10_IRQHandler
+TIM1_TRG_COM_TIM11_IRQHandler
+TIM1_CC_IRQHandler
+TIM2_IRQHandler
+TIM3_IRQHandler
+TIM4_IRQHandler
+I2C1_EV_IRQHandler
+I2C1_ER_IRQHandler
+I2C2_EV_IRQHandler
+I2C2_ER_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+USART3_IRQHandler
+EXTI15_10_IRQHandler
+RTCAlarm_IRQHandler
+USBWakeUp_IRQHandler
+TIM8_BRK_TIM12_IRQHandler
+TIM8_UP_TIM13_IRQHandler
+TIM8_TRG_COM_TIM14_IRQHandler
+TIM8_CC_IRQHandler
+ADC3_IRQHandler
+FSMC_IRQHandler
+SDIO_IRQHandler
+TIM5_IRQHandler
+SPI3_IRQHandler
+UART4_IRQHandler
+UART5_IRQHandler
+TIM6_IRQHandler
+TIM7_IRQHandler
+DMA2_Channel1_IRQHandler
+DMA2_Channel2_IRQHandler
+DMA2_Channel3_IRQHandler
+DMA2_Channel4_5_IRQHandler
+ B .
+
+ ENDP
+
+ ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, =(Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
+;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE*****
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_cl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_cl.s
new file mode 100644
index 0000000..039ec06
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_cl.s
@@ -0,0 +1,468 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_cl.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x Connectivity line Devices vector table for RIDE7 toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR
+ * address.
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF1E0F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ * @param None
+ * @retval None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+*******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_2_IRQHandler
+ .word CAN1_TX_IRQHandler
+ .word CAN1_RX0_IRQHandler
+ .word CAN1_RX1_IRQHandler
+ .word CAN1_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_IRQHandler
+ .word TIM1_UP_IRQHandler
+ .word TIM1_TRG_COM_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word OTG_FS_WKUP_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word TIM5_IRQHandler
+ .word SPI3_IRQHandler
+ .word UART4_IRQHandler
+ .word UART5_IRQHandler
+ .word TIM6_IRQHandler
+ .word TIM7_IRQHandler
+ .word DMA2_Channel1_IRQHandler
+ .word DMA2_Channel2_IRQHandler
+ .word DMA2_Channel3_IRQHandler
+ .word DMA2_Channel4_IRQHandler
+ .word DMA2_Channel5_IRQHandler
+ .word ETH_IRQHandler
+ .word ETH_WKUP_IRQHandler
+ .word CAN2_TX_IRQHandler
+ .word CAN2_RX0_IRQHandler
+ .word CAN2_RX1_IRQHandler
+ .word CAN2_SCE_IRQHandler
+ .word OTG_FS_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x1E0. This is for boot in RAM mode for
+ STM32F10x Connectivity line Devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_2_IRQHandler
+ .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+ .weak CAN1_TX_IRQHandler
+ .thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+ .weak CAN1_RX0_IRQHandler
+ .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_IRQHandler
+ .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_IRQHandler
+ .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_IRQHandler
+ .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak OTG_FS_WKUP_IRQHandler
+ .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+
+ .weak TIM5_IRQHandler
+ .thumb_set TIM5_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak UART4_IRQHandler
+ .thumb_set UART4_IRQHandler,Default_Handler
+
+ .weak UART5_IRQHandler
+ .thumb_set UART5_IRQHandler,Default_Handler
+
+ .weak TIM6_IRQHandler
+ .thumb_set TIM6_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel1_IRQHandler
+ .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel2_IRQHandler
+ .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel3_IRQHandler
+ .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel4_IRQHandler
+ .thumb_set DMA2_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel5_IRQHandler
+ .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+ .weak ETH_IRQHandler
+ .thumb_set ETH_IRQHandler,Default_Handler
+
+ .weak ETH_WKUP_IRQHandler
+ .thumb_set ETH_WKUP_IRQHandler,Default_Handler
+
+ .weak CAN2_TX_IRQHandler
+ .thumb_set CAN2_TX_IRQHandler,Default_Handler
+
+ .weak CAN2_RX0_IRQHandler
+ .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+
+ .weak CAN2_RX1_IRQHandler
+ .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+
+ .weak CAN2_SCE_IRQHandler
+ .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+
+ .weak OTG_FS_IRQHandler
+ .thumb_set OTG_FS_IRQHandler ,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd.s
new file mode 100644
index 0000000..e4ba08c
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd.s
@@ -0,0 +1,465 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_hd.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x High Density Devices vector table for RIDE7 toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system and the external SRAM mounted on
+ * STM3210E-EVAL board to be used as data memory (optional,
+ * to be enabled by user)
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
+
+.equ BootRAM, 0xF1E0F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ * @param None
+ * @retval None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+*******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_2_IRQHandler
+ .word USB_HP_CAN1_TX_IRQHandler
+ .word USB_LP_CAN1_RX0_IRQHandler
+ .word CAN1_RX1_IRQHandler
+ .word CAN1_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_IRQHandler
+ .word TIM1_UP_IRQHandler
+ .word TIM1_TRG_COM_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word USBWakeUp_IRQHandler
+ .word TIM8_BRK_IRQHandler
+ .word TIM8_UP_IRQHandler
+ .word TIM8_TRG_COM_IRQHandler
+ .word TIM8_CC_IRQHandler
+ .word ADC3_IRQHandler
+ .word FSMC_IRQHandler
+ .word SDIO_IRQHandler
+ .word TIM5_IRQHandler
+ .word SPI3_IRQHandler
+ .word UART4_IRQHandler
+ .word UART5_IRQHandler
+ .word TIM6_IRQHandler
+ .word TIM7_IRQHandler
+ .word DMA2_Channel1_IRQHandler
+ .word DMA2_Channel2_IRQHandler
+ .word DMA2_Channel3_IRQHandler
+ .word DMA2_Channel4_5_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x1E0. This is for boot in RAM mode for
+ STM32F10x High Density devices. */
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_2_IRQHandler
+ .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+ .weak USB_HP_CAN1_TX_IRQHandler
+ .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+ .weak USB_LP_CAN1_RX0_IRQHandler
+ .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_IRQHandler
+ .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_IRQHandler
+ .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_IRQHandler
+ .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak USBWakeUp_IRQHandler
+ .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+ .weak TIM8_BRK_IRQHandler
+ .thumb_set TIM8_BRK_IRQHandler,Default_Handler
+
+ .weak TIM8_UP_IRQHandler
+ .thumb_set TIM8_UP_IRQHandler,Default_Handler
+
+ .weak TIM8_TRG_COM_IRQHandler
+ .thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM8_CC_IRQHandler
+ .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+ .weak ADC3_IRQHandler
+ .thumb_set ADC3_IRQHandler,Default_Handler
+
+ .weak FSMC_IRQHandler
+ .thumb_set FSMC_IRQHandler,Default_Handler
+
+ .weak SDIO_IRQHandler
+ .thumb_set SDIO_IRQHandler,Default_Handler
+
+ .weak TIM5_IRQHandler
+ .thumb_set TIM5_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak UART4_IRQHandler
+ .thumb_set UART4_IRQHandler,Default_Handler
+
+ .weak UART5_IRQHandler
+ .thumb_set UART5_IRQHandler,Default_Handler
+
+ .weak TIM6_IRQHandler
+ .thumb_set TIM6_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel1_IRQHandler
+ .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel2_IRQHandler
+ .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel3_IRQHandler
+ .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel4_5_IRQHandler
+ .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd_vl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd_vl.s
new file mode 100644
index 0000000..daad5cc
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_hd_vl.s
@@ -0,0 +1,442 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_hd_vl.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x High Density Value Line Devices vector table for RIDE7
+ * toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system and the external SRAM mounted on
+ * STM32100E-EVAL board to be used as data memory (optional,
+ * to be enabled by user)
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF108F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ * @param None
+ * @retval None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_TIM15_IRQHandler
+ .word TIM1_UP_TIM16_IRQHandler
+ .word TIM1_TRG_COM_TIM17_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word CEC_IRQHandler
+ .word TIM12_IRQHandler
+ .word TIM13_IRQHandler
+ .word TIM14_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word TIM5_IRQHandler
+ .word SPI3_IRQHandler
+ .word UART4_IRQHandler
+ .word UART5_IRQHandler
+ .word TIM6_DAC_IRQHandler
+ .word TIM7_IRQHandler
+ .word DMA2_Channel1_IRQHandler
+ .word DMA2_Channel2_IRQHandler
+ .word DMA2_Channel3_IRQHandler
+ .word DMA2_Channel4_5_IRQHandler
+ .word DMA2_Channel5_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x1E0. This is for boot in RAM mode for
+ STM32F10x High Density Value line devices. */
+
+/*******************************************************************************
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM15_IRQHandler
+ .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM16_IRQHandler
+ .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_TIM17_IRQHandler
+ .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak CEC_IRQHandler
+ .thumb_set CEC_IRQHandler,Default_Handler
+
+ .weak TIM12_IRQHandler
+ .thumb_set TIM12_IRQHandler,Default_Handler
+
+ .weak TIM13_IRQHandler
+ .thumb_set TIM13_IRQHandler,Default_Handler
+
+ .weak TIM14_IRQHandler
+ .thumb_set TIM14_IRQHandler,Default_Handler
+
+ .weak TIM5_IRQHandler
+ .thumb_set TIM5_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak UART4_IRQHandler
+ .thumb_set UART4_IRQHandler,Default_Handler
+
+ .weak UART5_IRQHandler
+ .thumb_set UART5_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel1_IRQHandler
+ .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel2_IRQHandler
+ .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel3_IRQHandler
+ .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel4_5_IRQHandler
+ .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel5_IRQHandler
+ .thumb_set DMA2_Channel5_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld.s
new file mode 100644
index 0000000..aaa09ec
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld.s
@@ -0,0 +1,343 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_ld.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x Low Density Devices vector table for RIDE7 toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF108F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ * @param None
+ * @retval None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_2_IRQHandler
+ .word USB_HP_CAN1_TX_IRQHandler
+ .word USB_LP_CAN1_RX0_IRQHandler
+ .word CAN1_RX1_IRQHandler
+ .word CAN1_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_IRQHandler
+ .word TIM1_UP_IRQHandler
+ .word TIM1_TRG_COM_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word 0
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word 0
+ .word 0
+ .word SPI1_IRQHandler
+ .word 0
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word 0
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word USBWakeUp_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x108. This is for boot in RAM mode for
+ STM32F10x Low Density devices.*/
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_2_IRQHandler
+ .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+ .weak USB_HP_CAN1_TX_IRQHandler
+ .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+ .weak USB_LP_CAN1_RX0_IRQHandler
+ .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_IRQHandler
+ .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_IRQHandler
+ .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_IRQHandler
+ .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak USBWakeUp_IRQHandler
+ .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld_vl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld_vl.s
new file mode 100644
index 0000000..d4401be
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_ld_vl.s
@@ -0,0 +1,383 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_ld_vl.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x Low Density Value Line Devices vector table for RIDE7
+ * toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF108F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ * @param None
+ * @retval None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_TIM15_IRQHandler
+ .word TIM1_UP_TIM16_IRQHandler
+ .word TIM1_TRG_COM_TIM17_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word 0
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word 0
+ .word 0
+ .word SPI1_IRQHandler
+ .word 0
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word 0
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word CEC_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word TIM6_DAC_IRQHandler
+ .word TIM7_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x01CC. This is for boot in RAM mode for
+ STM32F10x Low Density Value Line devices. */
+
+/*******************************************************************************
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM15_IRQHandler
+ .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM16_IRQHandler
+ .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_TIM17_IRQHandler
+ .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak CEC_IRQHandler
+ .thumb_set CEC_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md.s
new file mode 100644
index 0000000..4b4a050
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md.s
@@ -0,0 +1,358 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_md.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x Medium Density Devices vector table for RIDE7 toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF108F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ * @param None
+ * @retval None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_2_IRQHandler
+ .word USB_HP_CAN1_TX_IRQHandler
+ .word USB_LP_CAN1_RX0_IRQHandler
+ .word CAN1_RX1_IRQHandler
+ .word CAN1_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_IRQHandler
+ .word TIM1_UP_IRQHandler
+ .word TIM1_TRG_COM_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word USBWakeUp_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x108. This is for boot in RAM mode for
+ STM32F10x Medium Density devices. */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_2_IRQHandler
+ .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+ .weak USB_HP_CAN1_TX_IRQHandler
+ .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+ .weak USB_LP_CAN1_RX0_IRQHandler
+ .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_IRQHandler
+ .thumb_set TIM1_BRK_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_IRQHandler
+ .thumb_set TIM1_UP_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_IRQHandler
+ .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak USBWakeUp_IRQHandler
+ .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md_vl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md_vl.s
new file mode 100644
index 0000000..8bce997
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_md_vl.s
@@ -0,0 +1,399 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_md_vl.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x Medium Density Value Line Devices vector table for RIDE7
+ * toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+
+.equ BootRAM, 0xF108F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ * @param None
+ * @retval None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_TIM15_IRQHandler
+ .word TIM1_UP_TIM16_IRQHandler
+ .word TIM1_TRG_COM_TIM17_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word CEC_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word TIM6_DAC_IRQHandler
+ .word TIM7_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x01CC. This is for boot in RAM mode for
+ STM32F10x Medium Value Line Density devices. */
+
+/*******************************************************************************
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_IRQHandler
+ .thumb_set ADC1_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM15_IRQHandler
+ .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM16_IRQHandler
+ .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_TIM17_IRQHandler
+ .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak CEC_IRQHandler
+ .thumb_set CEC_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_xl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_xl.s
new file mode 100644
index 0000000..3d727a0
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/gcc_ride7/startup_stm32f10x_xl.s
@@ -0,0 +1,465 @@
+/**
+ ******************************************************************************
+ * @file startup_stm32f10x_xl.s
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief STM32F10x XL-Density Devices vector table for RIDE7 toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Configure the clock system and the external SRAM mounted on
+ * STM3210E-EVAL board to be used as data memory (optional,
+ * to be enabled by user)
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M3 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m3
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
+
+.equ BootRAM, 0xF1E0F85F
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ * @param None
+ * @retval None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+*******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+ .word WWDG_IRQHandler
+ .word PVD_IRQHandler
+ .word TAMPER_IRQHandler
+ .word RTC_IRQHandler
+ .word FLASH_IRQHandler
+ .word RCC_IRQHandler
+ .word EXTI0_IRQHandler
+ .word EXTI1_IRQHandler
+ .word EXTI2_IRQHandler
+ .word EXTI3_IRQHandler
+ .word EXTI4_IRQHandler
+ .word DMA1_Channel1_IRQHandler
+ .word DMA1_Channel2_IRQHandler
+ .word DMA1_Channel3_IRQHandler
+ .word DMA1_Channel4_IRQHandler
+ .word DMA1_Channel5_IRQHandler
+ .word DMA1_Channel6_IRQHandler
+ .word DMA1_Channel7_IRQHandler
+ .word ADC1_2_IRQHandler
+ .word USB_HP_CAN1_TX_IRQHandler
+ .word USB_LP_CAN1_RX0_IRQHandler
+ .word CAN1_RX1_IRQHandler
+ .word CAN1_SCE_IRQHandler
+ .word EXTI9_5_IRQHandler
+ .word TIM1_BRK_TIM9_IRQHandler
+ .word TIM1_UP_TIM10_IRQHandler
+ .word TIM1_TRG_COM_TIM11_IRQHandler
+ .word TIM1_CC_IRQHandler
+ .word TIM2_IRQHandler
+ .word TIM3_IRQHandler
+ .word TIM4_IRQHandler
+ .word I2C1_EV_IRQHandler
+ .word I2C1_ER_IRQHandler
+ .word I2C2_EV_IRQHandler
+ .word I2C2_ER_IRQHandler
+ .word SPI1_IRQHandler
+ .word SPI2_IRQHandler
+ .word USART1_IRQHandler
+ .word USART2_IRQHandler
+ .word USART3_IRQHandler
+ .word EXTI15_10_IRQHandler
+ .word RTCAlarm_IRQHandler
+ .word USBWakeUp_IRQHandler
+ .word TIM8_BRK_TIM12_IRQHandler
+ .word TIM8_UP_TIM13_IRQHandler
+ .word TIM8_TRG_COM_TIM14_IRQHandler
+ .word TIM8_CC_IRQHandler
+ .word ADC3_IRQHandler
+ .word FSMC_IRQHandler
+ .word SDIO_IRQHandler
+ .word TIM5_IRQHandler
+ .word SPI3_IRQHandler
+ .word UART4_IRQHandler
+ .word UART5_IRQHandler
+ .word TIM6_IRQHandler
+ .word TIM7_IRQHandler
+ .word DMA2_Channel1_IRQHandler
+ .word DMA2_Channel2_IRQHandler
+ .word DMA2_Channel3_IRQHandler
+ .word DMA2_Channel4_5_IRQHandler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word BootRAM /* @0x1E0. This is for boot in RAM mode for
+ STM32F10x XL Density devices. */
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMPER_IRQHandler
+ .thumb_set TAMPER_IRQHandler,Default_Handler
+
+ .weak RTC_IRQHandler
+ .thumb_set RTC_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel1_IRQHandler
+ .thumb_set DMA1_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel2_IRQHandler
+ .thumb_set DMA1_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel3_IRQHandler
+ .thumb_set DMA1_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel4_IRQHandler
+ .thumb_set DMA1_Channel4_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel5_IRQHandler
+ .thumb_set DMA1_Channel5_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel6_IRQHandler
+ .thumb_set DMA1_Channel6_IRQHandler,Default_Handler
+
+ .weak DMA1_Channel7_IRQHandler
+ .thumb_set DMA1_Channel7_IRQHandler,Default_Handler
+
+ .weak ADC1_2_IRQHandler
+ .thumb_set ADC1_2_IRQHandler,Default_Handler
+
+ .weak USB_HP_CAN1_TX_IRQHandler
+ .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
+
+ .weak USB_LP_CAN1_RX0_IRQHandler
+ .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM9_IRQHandler
+ .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM10_IRQHandler
+ .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_TIM11_IRQHandler
+ .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTCAlarm_IRQHandler
+ .thumb_set RTCAlarm_IRQHandler,Default_Handler
+
+ .weak USBWakeUp_IRQHandler
+ .thumb_set USBWakeUp_IRQHandler,Default_Handler
+
+ .weak TIM8_BRK_TIM12_IRQHandler
+ .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
+
+ .weak TIM8_UP_TIM13_IRQHandler
+ .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
+
+ .weak TIM8_TRG_COM_TIM14_IRQHandler
+ .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
+
+ .weak TIM8_CC_IRQHandler
+ .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+ .weak ADC3_IRQHandler
+ .thumb_set ADC3_IRQHandler,Default_Handler
+
+ .weak FSMC_IRQHandler
+ .thumb_set FSMC_IRQHandler,Default_Handler
+
+ .weak SDIO_IRQHandler
+ .thumb_set SDIO_IRQHandler,Default_Handler
+
+ .weak TIM5_IRQHandler
+ .thumb_set TIM5_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak UART4_IRQHandler
+ .thumb_set UART4_IRQHandler,Default_Handler
+
+ .weak UART5_IRQHandler
+ .thumb_set UART5_IRQHandler,Default_Handler
+
+ .weak TIM6_IRQHandler
+ .thumb_set TIM6_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel1_IRQHandler
+ .thumb_set DMA2_Channel1_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel2_IRQHandler
+ .thumb_set DMA2_Channel2_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel3_IRQHandler
+ .thumb_set DMA2_Channel3_IRQHandler,Default_Handler
+
+ .weak DMA2_Channel4_5_IRQHandler
+ .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_cl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_cl.s
new file mode 100644
index 0000000..55a7932
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_cl.s
@@ -0,0 +1,507 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
+;* File Name : startup_stm32f10x_cl.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x Connectivity line devices vector table for
+;* EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Configure the clock system
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address.
+;* After Reset the Cortex-M3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_2_IRQHandler ; ADC1 and ADC2
+ DCD CAN1_TX_IRQHandler ; CAN1 TX
+ DCD CAN1_RX0_IRQHandler ; CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_IRQHandler ; TIM1 Break
+ DCD TIM1_UP_IRQHandler ; TIM1 Update
+ DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C1 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC alarm through EXTI line
+ DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD UART4_IRQHandler ; UART4
+ DCD UART5_IRQHandler ; UART5
+ DCD TIM6_IRQHandler ; TIM6
+ DCD TIM7_IRQHandler ; TIM7
+ DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
+ DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
+ DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
+ DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4
+ DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
+ DCD ETH_IRQHandler ; Ethernet
+ DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
+ DCD CAN2_TX_IRQHandler ; CAN2 TX
+ DCD CAN2_RX0_IRQHandler ; CAN2 RX0
+ DCD CAN2_RX1_IRQHandler ; CAN2 RX1
+ DCD CAN2_SCE_IRQHandler ; CAN2 SCE
+ DCD OTG_FS_IRQHandler ; USB OTG FS
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK MemManage_Handler
+ SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+ B MemManage_Handler
+
+ PUBWEAK BusFault_Handler
+ SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+ B BusFault_Handler
+
+ PUBWEAK UsageFault_Handler
+ SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+ B UsageFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK DebugMon_Handler
+ SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+ B DebugMon_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+ B PVD_IRQHandler
+
+ PUBWEAK TAMPER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+ B TAMPER_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+ B EXTI0_IRQHandler
+
+ PUBWEAK EXTI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+ B EXTI1_IRQHandler
+
+ PUBWEAK EXTI2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+ B EXTI2_IRQHandler
+
+ PUBWEAK EXTI3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+ B EXTI3_IRQHandler
+
+
+ PUBWEAK EXTI4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+ B EXTI4_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+ B DMA1_Channel2_IRQHandler
+
+ PUBWEAK DMA1_Channel3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+ B DMA1_Channel3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+ B DMA1_Channel4_IRQHandler
+
+ PUBWEAK DMA1_Channel5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+ B DMA1_Channel5_IRQHandler
+
+ PUBWEAK DMA1_Channel6_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+ B DMA1_Channel6_IRQHandler
+
+ PUBWEAK DMA1_Channel7_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+ B DMA1_Channel7_IRQHandler
+
+ PUBWEAK ADC1_2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+ADC1_2_IRQHandler
+ B ADC1_2_IRQHandler
+
+ PUBWEAK CAN1_TX_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN1_TX_IRQHandler
+ B CAN1_TX_IRQHandler
+
+ PUBWEAK CAN1_RX0_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN1_RX0_IRQHandler
+ B CAN1_RX0_IRQHandler
+
+ PUBWEAK CAN1_RX1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN1_RX1_IRQHandler
+ B CAN1_RX1_IRQHandler
+
+ PUBWEAK CAN1_SCE_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN1_SCE_IRQHandler
+ B CAN1_SCE_IRQHandler
+
+ PUBWEAK EXTI9_5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+ B EXTI9_5_IRQHandler
+
+ PUBWEAK TIM1_BRK_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_BRK_IRQHandler
+ B TIM1_BRK_IRQHandler
+
+ PUBWEAK TIM1_UP_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_UP_IRQHandler
+ B TIM1_UP_IRQHandler
+
+ PUBWEAK TIM1_TRG_COM_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_IRQHandler
+ B TIM1_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM4_IRQHandler
+ B TIM4_IRQHandler
+
+ PUBWEAK I2C1_EV_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+ B I2C1_EV_IRQHandler
+
+ PUBWEAK I2C1_ER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+ B I2C1_ER_IRQHandler
+
+ PUBWEAK I2C2_EV_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C2_EV_IRQHandler
+ B I2C2_EV_IRQHandler
+
+ PUBWEAK I2C2_ER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C2_ER_IRQHandler
+ B I2C2_ER_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK USART3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART3_IRQHandler
+ B USART3_IRQHandler
+
+ PUBWEAK EXTI15_10_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+ B EXTI15_10_IRQHandler
+
+ PUBWEAK RTCAlarm_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+ B RTCAlarm_IRQHandler
+
+ PUBWEAK OTG_FS_WKUP_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+OTG_FS_WKUP_IRQHandler
+ B OTG_FS_WKUP_IRQHandler
+
+ PUBWEAK TIM5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM5_IRQHandler
+ B TIM5_IRQHandler
+
+ PUBWEAK SPI3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI3_IRQHandler
+ B SPI3_IRQHandler
+
+ PUBWEAK UART4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+UART4_IRQHandler
+ B UART4_IRQHandler
+
+ PUBWEAK UART5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+UART5_IRQHandler
+ B UART5_IRQHandler
+
+ PUBWEAK TIM6_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM6_IRQHandler
+ B TIM6_IRQHandler
+
+ PUBWEAK TIM7_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM7_IRQHandler
+ B TIM7_IRQHandler
+
+ PUBWEAK DMA2_Channel1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel1_IRQHandler
+ B DMA2_Channel1_IRQHandler
+
+ PUBWEAK DMA2_Channel2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel2_IRQHandler
+ B DMA2_Channel2_IRQHandler
+
+ PUBWEAK DMA2_Channel3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel3_IRQHandler
+ B DMA2_Channel3_IRQHandler
+
+ PUBWEAK DMA2_Channel4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel4_IRQHandler
+ B DMA2_Channel4_IRQHandler
+
+ PUBWEAK DMA2_Channel5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel5_IRQHandler
+ B DMA2_Channel5_IRQHandler
+
+ PUBWEAK ETH_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+ETH_IRQHandler
+ B ETH_IRQHandler
+
+ PUBWEAK ETH_WKUP_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+ETH_WKUP_IRQHandler
+ B ETH_WKUP_IRQHandler
+
+ PUBWEAK CAN2_TX_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN2_TX_IRQHandler
+ B CAN2_TX_IRQHandler
+
+ PUBWEAK CAN2_RX0_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN2_RX0_IRQHandler
+ B CAN2_RX0_IRQHandler
+
+ PUBWEAK CAN2_RX1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN2_RX1_IRQHandler
+ B CAN2_RX1_IRQHandler
+
+ PUBWEAK CAN2_SCE_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN2_SCE_IRQHandler
+ B CAN2_SCE_IRQHandler
+
+ PUBWEAK OTG_FS_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+OTG_FS_IRQHandler
+ B OTG_FS_IRQHandler
+
+ END
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd.s
new file mode 100644
index 0000000..37ee7a2
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd.s
@@ -0,0 +1,496 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name : startup_stm32f10x_hd.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x High Density Devices vector table for EWARM
+;* toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Configure the clock system and the external SRAM
+;* mounted on STM3210E-EVAL board to be used as data
+;* memory (optional, to be enabled by user)
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR address,
+;* After Reset the Cortex-M3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_2_IRQHandler ; ADC1 & ADC2
+ DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
+ DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_IRQHandler ; TIM1 Break
+ DCD TIM1_UP_IRQHandler ; TIM1 Update
+ DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
+ DCD TIM8_BRK_IRQHandler ; TIM8 Break
+ DCD TIM8_UP_IRQHandler ; TIM8 Update
+ DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation
+ DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
+ DCD ADC3_IRQHandler ; ADC3
+ DCD FSMC_IRQHandler ; FSMC
+ DCD SDIO_IRQHandler ; SDIO
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD UART4_IRQHandler ; UART4
+ DCD UART5_IRQHandler ; UART5
+ DCD TIM6_IRQHandler ; TIM6
+ DCD TIM7_IRQHandler ; TIM7
+ DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
+ DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
+ DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
+ DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK MemManage_Handler
+ SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+ B MemManage_Handler
+
+ PUBWEAK BusFault_Handler
+ SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+ B BusFault_Handler
+
+ PUBWEAK UsageFault_Handler
+ SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+ B UsageFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK DebugMon_Handler
+ SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+ B DebugMon_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+ B PVD_IRQHandler
+
+ PUBWEAK TAMPER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+ B TAMPER_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+ B EXTI0_IRQHandler
+
+ PUBWEAK EXTI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+ B EXTI1_IRQHandler
+
+ PUBWEAK EXTI2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+ B EXTI2_IRQHandler
+
+ PUBWEAK EXTI3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+ B EXTI3_IRQHandler
+
+ PUBWEAK EXTI4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+ B EXTI4_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+ B DMA1_Channel2_IRQHandler
+
+ PUBWEAK DMA1_Channel3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+ B DMA1_Channel3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+ B DMA1_Channel4_IRQHandler
+
+ PUBWEAK DMA1_Channel5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+ B DMA1_Channel5_IRQHandler
+
+ PUBWEAK DMA1_Channel6_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+ B DMA1_Channel6_IRQHandler
+
+ PUBWEAK DMA1_Channel7_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+ B DMA1_Channel7_IRQHandler
+
+ PUBWEAK ADC1_2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+ADC1_2_IRQHandler
+ B ADC1_2_IRQHandler
+
+ PUBWEAK USB_HP_CAN1_TX_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USB_HP_CAN1_TX_IRQHandler
+ B USB_HP_CAN1_TX_IRQHandler
+
+ PUBWEAK USB_LP_CAN1_RX0_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USB_LP_CAN1_RX0_IRQHandler
+ B USB_LP_CAN1_RX0_IRQHandler
+
+ PUBWEAK CAN1_RX1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN1_RX1_IRQHandler
+ B CAN1_RX1_IRQHandler
+
+ PUBWEAK CAN1_SCE_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN1_SCE_IRQHandler
+ B CAN1_SCE_IRQHandler
+
+ PUBWEAK EXTI9_5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+ B EXTI9_5_IRQHandler
+
+ PUBWEAK TIM1_BRK_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_BRK_IRQHandler
+ B TIM1_BRK_IRQHandler
+
+ PUBWEAK TIM1_UP_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_UP_IRQHandler
+ B TIM1_UP_IRQHandler
+
+ PUBWEAK TIM1_TRG_COM_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_IRQHandler
+ B TIM1_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM4_IRQHandler
+ B TIM4_IRQHandler
+
+ PUBWEAK I2C1_EV_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+ B I2C1_EV_IRQHandler
+
+ PUBWEAK I2C1_ER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+ B I2C1_ER_IRQHandler
+
+ PUBWEAK I2C2_EV_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C2_EV_IRQHandler
+ B I2C2_EV_IRQHandler
+
+ PUBWEAK I2C2_ER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C2_ER_IRQHandler
+ B I2C2_ER_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK USART3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART3_IRQHandler
+ B USART3_IRQHandler
+
+ PUBWEAK EXTI15_10_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+ B EXTI15_10_IRQHandler
+
+ PUBWEAK RTCAlarm_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+ B RTCAlarm_IRQHandler
+
+ PUBWEAK USBWakeUp_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USBWakeUp_IRQHandler
+ B USBWakeUp_IRQHandler
+
+ PUBWEAK TIM8_BRK_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM8_BRK_IRQHandler
+ B TIM8_BRK_IRQHandler
+
+ PUBWEAK TIM8_UP_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM8_UP_IRQHandler
+ B TIM8_UP_IRQHandler
+
+ PUBWEAK TIM8_TRG_COM_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM8_TRG_COM_IRQHandler
+ B TIM8_TRG_COM_IRQHandler
+
+ PUBWEAK TIM8_CC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM8_CC_IRQHandler
+ B TIM8_CC_IRQHandler
+
+ PUBWEAK ADC3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+ADC3_IRQHandler
+ B ADC3_IRQHandler
+
+ PUBWEAK FSMC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+FSMC_IRQHandler
+ B FSMC_IRQHandler
+
+ PUBWEAK SDIO_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SDIO_IRQHandler
+ B SDIO_IRQHandler
+
+ PUBWEAK TIM5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM5_IRQHandler
+ B TIM5_IRQHandler
+
+ PUBWEAK SPI3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI3_IRQHandler
+ B SPI3_IRQHandler
+
+ PUBWEAK UART4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+UART4_IRQHandler
+ B UART4_IRQHandler
+
+ PUBWEAK UART5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+UART5_IRQHandler
+ B UART5_IRQHandler
+
+ PUBWEAK TIM6_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM6_IRQHandler
+ B TIM6_IRQHandler
+
+ PUBWEAK TIM7_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM7_IRQHandler
+ B TIM7_IRQHandler
+
+ PUBWEAK DMA2_Channel1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel1_IRQHandler
+ B DMA2_Channel1_IRQHandler
+
+ PUBWEAK DMA2_Channel2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel2_IRQHandler
+ B DMA2_Channel2_IRQHandler
+
+ PUBWEAK DMA2_Channel3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel3_IRQHandler
+ B DMA2_Channel3_IRQHandler
+
+ PUBWEAK DMA2_Channel4_5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel4_5_IRQHandler
+ B DMA2_Channel4_5_IRQHandler
+
+
+ END
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd_vl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd_vl.s
new file mode 100644
index 0000000..33f592f
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_hd_vl.s
@@ -0,0 +1,461 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name : startup_stm32f10x_hd_vl.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x High Density Value Line Devices vector table
+;* for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Configure the clock system and the external SRAM
+;* mounted on STM32100E-EVAL board to be used as data
+;* memory (optional, to be enabled by user)
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address.
+;* After Reset the Cortex-M3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_IRQHandler ; ADC1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
+ DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
+ DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD CEC_IRQHandler ; HDMI-CEC
+ DCD TIM12_IRQHandler ; TIM12
+ DCD TIM13_IRQHandler ; TIM13
+ DCD TIM14_IRQHandler ; TIM14
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD UART4_IRQHandler ; UART4
+ DCD UART5_IRQHandler ; UART5
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
+ DCD TIM7_IRQHandler ; TIM7
+ DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
+ DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
+ DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
+ DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
+ DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK MemManage_Handler
+ SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+ B MemManage_Handler
+
+ PUBWEAK BusFault_Handler
+ SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+ B BusFault_Handler
+
+ PUBWEAK UsageFault_Handler
+ SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+ B UsageFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK DebugMon_Handler
+ SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+ B DebugMon_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+ B PVD_IRQHandler
+
+ PUBWEAK TAMPER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+ B TAMPER_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+ B EXTI0_IRQHandler
+
+ PUBWEAK EXTI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+ B EXTI1_IRQHandler
+
+ PUBWEAK EXTI2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+ B EXTI2_IRQHandler
+
+ PUBWEAK EXTI3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+ B EXTI3_IRQHandler
+
+ PUBWEAK EXTI4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+ B EXTI4_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+ B DMA1_Channel2_IRQHandler
+
+ PUBWEAK DMA1_Channel3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+ B DMA1_Channel3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+ B DMA1_Channel4_IRQHandler
+
+ PUBWEAK DMA1_Channel5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+ B DMA1_Channel5_IRQHandler
+
+ PUBWEAK DMA1_Channel6_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+ B DMA1_Channel6_IRQHandler
+
+ PUBWEAK DMA1_Channel7_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+ B DMA1_Channel7_IRQHandler
+
+ PUBWEAK ADC1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+ADC1_IRQHandler
+ B ADC1_IRQHandler
+
+ PUBWEAK EXTI9_5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+ B EXTI9_5_IRQHandler
+
+ PUBWEAK TIM1_BRK_TIM15_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_BRK_TIM15_IRQHandler
+ B TIM1_BRK_TIM15_IRQHandler
+
+ PUBWEAK TIM1_UP_TIM16_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_UP_TIM16_IRQHandler
+ B TIM1_UP_TIM16_IRQHandler
+
+ PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_TIM17_IRQHandler
+ B TIM1_TRG_COM_TIM17_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM4_IRQHandler
+ B TIM4_IRQHandler
+
+ PUBWEAK I2C1_EV_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+ B I2C1_EV_IRQHandler
+
+ PUBWEAK I2C1_ER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+ B I2C1_ER_IRQHandler
+
+ PUBWEAK I2C2_EV_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C2_EV_IRQHandler
+ B I2C2_EV_IRQHandler
+
+ PUBWEAK I2C2_ER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C2_ER_IRQHandler
+ B I2C2_ER_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK USART3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART3_IRQHandler
+ B USART3_IRQHandler
+
+ PUBWEAK EXTI15_10_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+ B EXTI15_10_IRQHandler
+
+ PUBWEAK RTCAlarm_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+ B RTCAlarm_IRQHandler
+
+ PUBWEAK CEC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CEC_IRQHandler
+ B CEC_IRQHandler
+
+ PUBWEAK TIM12_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM12_IRQHandler
+ B TIM12_IRQHandler
+
+ PUBWEAK TIM13_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM13_IRQHandler
+ B TIM13_IRQHandler
+
+ PUBWEAK TIM14_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM14_IRQHandler
+ B TIM14_IRQHandler
+
+ PUBWEAK TIM5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM5_IRQHandler
+ B TIM5_IRQHandler
+
+ PUBWEAK SPI3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI3_IRQHandler
+ B SPI3_IRQHandler
+
+ PUBWEAK UART4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+UART4_IRQHandler
+ B UART4_IRQHandler
+
+ PUBWEAK UART5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+UART5_IRQHandler
+ B UART5_IRQHandler
+
+ PUBWEAK TIM6_DAC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM6_DAC_IRQHandler
+ B TIM6_DAC_IRQHandler
+
+ PUBWEAK TIM7_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM7_IRQHandler
+ B TIM7_IRQHandler
+
+ PUBWEAK DMA2_Channel1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel1_IRQHandler
+ B DMA2_Channel1_IRQHandler
+
+ PUBWEAK DMA2_Channel2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel2_IRQHandler
+ B DMA2_Channel2_IRQHandler
+
+ PUBWEAK DMA2_Channel3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel3_IRQHandler
+ B DMA2_Channel3_IRQHandler
+
+ PUBWEAK DMA2_Channel4_5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel4_5_IRQHandler
+ B DMA2_Channel4_5_IRQHandler
+
+ PUBWEAK DMA2_Channel5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel5_IRQHandler
+ B DMA2_Channel5_IRQHandler
+
+ END
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld.s
new file mode 100644
index 0000000..e2b2b4d
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld.s
@@ -0,0 +1,366 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name : startup_stm32f10x_ld.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x Low Density Devices vector table for EWARM
+;* toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Configure the clock system
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address.
+;* After Reset the Cortex-M3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_2_IRQHandler ; ADC1 & ADC2
+ DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
+ DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_IRQHandler ; TIM1 Break
+ DCD TIM1_UP_IRQHandler ; TIM1 Update
+ DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK MemManage_Handler
+ SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+ B MemManage_Handler
+
+ PUBWEAK BusFault_Handler
+ SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+ B BusFault_Handler
+
+ PUBWEAK UsageFault_Handler
+ SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+ B UsageFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK DebugMon_Handler
+ SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+ B DebugMon_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+ B PVD_IRQHandler
+
+ PUBWEAK TAMPER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+ B TAMPER_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+ B EXTI0_IRQHandler
+
+ PUBWEAK EXTI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+ B EXTI1_IRQHandler
+
+ PUBWEAK EXTI2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+ B EXTI2_IRQHandler
+
+ PUBWEAK EXTI3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+ B EXTI3_IRQHandler
+
+ PUBWEAK EXTI4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+ B EXTI4_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+ B DMA1_Channel2_IRQHandler
+
+ PUBWEAK DMA1_Channel3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+ B DMA1_Channel3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+ B DMA1_Channel4_IRQHandler
+
+ PUBWEAK DMA1_Channel5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+ B DMA1_Channel5_IRQHandler
+
+ PUBWEAK DMA1_Channel6_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+ B DMA1_Channel6_IRQHandler
+
+ PUBWEAK DMA1_Channel7_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+ B DMA1_Channel7_IRQHandler
+
+ PUBWEAK ADC1_2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+ADC1_2_IRQHandler
+ B ADC1_2_IRQHandler
+
+ PUBWEAK USB_HP_CAN1_TX_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USB_HP_CAN1_TX_IRQHandler
+ B USB_HP_CAN1_TX_IRQHandler
+
+ PUBWEAK USB_LP_CAN1_RX0_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USB_LP_CAN1_RX0_IRQHandler
+ B USB_LP_CAN1_RX0_IRQHandler
+
+ PUBWEAK CAN1_RX1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN1_RX1_IRQHandler
+ B CAN1_RX1_IRQHandler
+
+ PUBWEAK CAN1_SCE_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN1_SCE_IRQHandler
+ B CAN1_SCE_IRQHandler
+
+ PUBWEAK EXTI9_5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+ B EXTI9_5_IRQHandler
+
+ PUBWEAK TIM1_BRK_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_BRK_IRQHandler
+ B TIM1_BRK_IRQHandler
+
+ PUBWEAK TIM1_UP_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_UP_IRQHandler
+ B TIM1_UP_IRQHandler
+
+ PUBWEAK TIM1_TRG_COM_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_IRQHandler
+ B TIM1_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK I2C1_EV_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+ B I2C1_EV_IRQHandler
+
+ PUBWEAK I2C1_ER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+ B I2C1_ER_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK EXTI15_10_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+ B EXTI15_10_IRQHandler
+
+ PUBWEAK RTCAlarm_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+ B RTCAlarm_IRQHandler
+
+ PUBWEAK USBWakeUp_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USBWakeUp_IRQHandler
+ B USBWakeUp_IRQHandler
+
+ END
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld_vl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld_vl.s
new file mode 100644
index 0000000..a4a4933
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_ld_vl.s
@@ -0,0 +1,369 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name : startup_stm32f10x_ld_vl.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x Low Density Value Line Devices vector table
+;* for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Configure the clock system
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address.
+;* After Reset the Cortex-M3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_IRQHandler ; ADC1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
+ DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
+ DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD 0 ; Reserved
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SPI1_IRQHandler ; SPI1
+ DCD 0 ; Reserved
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD 0 ; Reserved
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD CEC_IRQHandler ; HDMI-CEC
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
+ DCD TIM7_IRQHandler ; TIM7
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK MemManage_Handler
+ SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+ B MemManage_Handler
+
+ PUBWEAK BusFault_Handler
+ SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+ B BusFault_Handler
+
+ PUBWEAK UsageFault_Handler
+ SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+ B UsageFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK DebugMon_Handler
+ SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+ B DebugMon_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+ B PVD_IRQHandler
+
+ PUBWEAK TAMPER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+ B TAMPER_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+ B EXTI0_IRQHandler
+
+ PUBWEAK EXTI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+ B EXTI1_IRQHandler
+
+ PUBWEAK EXTI2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+ B EXTI2_IRQHandler
+
+ PUBWEAK EXTI3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+ B EXTI3_IRQHandler
+
+ PUBWEAK EXTI4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+ B EXTI4_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+ B DMA1_Channel2_IRQHandler
+
+ PUBWEAK DMA1_Channel3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+ B DMA1_Channel3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+ B DMA1_Channel4_IRQHandler
+
+ PUBWEAK DMA1_Channel5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+ B DMA1_Channel5_IRQHandler
+
+ PUBWEAK DMA1_Channel6_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+ B DMA1_Channel6_IRQHandler
+
+ PUBWEAK DMA1_Channel7_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+ B DMA1_Channel7_IRQHandler
+
+ PUBWEAK ADC1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+ADC1_IRQHandler
+ B ADC1_IRQHandler
+
+ PUBWEAK EXTI9_5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+ B EXTI9_5_IRQHandler
+
+ PUBWEAK TIM1_BRK_TIM15_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_BRK_TIM15_IRQHandler
+ B TIM1_BRK_TIM15_IRQHandler
+
+ PUBWEAK TIM1_UP_TIM16_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_UP_TIM16_IRQHandler
+ B TIM1_UP_TIM16_IRQHandler
+
+ PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_TIM17_IRQHandler
+ B TIM1_TRG_COM_TIM17_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK I2C1_EV_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+ B I2C1_EV_IRQHandler
+
+ PUBWEAK I2C1_ER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+ B I2C1_ER_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK EXTI15_10_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+ B EXTI15_10_IRQHandler
+
+ PUBWEAK RTCAlarm_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+ B RTCAlarm_IRQHandler
+
+ PUBWEAK CEC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CEC_IRQHandler
+ B CEC_IRQHandler
+
+ PUBWEAK TIM6_DAC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM6_DAC_IRQHandler
+ B TIM6_DAC_IRQHandler
+
+ PUBWEAK TIM7_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM7_IRQHandler
+ B TIM7_IRQHandler
+
+ END
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md.s
new file mode 100644
index 0000000..5863eb9
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md.s
@@ -0,0 +1,391 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name : startup_stm32f10x_md.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x Medium Density Devices vector table for
+;* EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Configure the clock system
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address.
+;* After Reset the Cortex-M3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_2_IRQHandler ; ADC1 & ADC2
+ DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
+ DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_IRQHandler ; TIM1 Break
+ DCD TIM1_UP_IRQHandler ; TIM1 Update
+ DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK MemManage_Handler
+ SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+ B MemManage_Handler
+
+ PUBWEAK BusFault_Handler
+ SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+ B BusFault_Handler
+
+ PUBWEAK UsageFault_Handler
+ SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+ B UsageFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK DebugMon_Handler
+ SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+ B DebugMon_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+ B PVD_IRQHandler
+
+ PUBWEAK TAMPER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+ B TAMPER_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+ B EXTI0_IRQHandler
+
+ PUBWEAK EXTI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+ B EXTI1_IRQHandler
+
+ PUBWEAK EXTI2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+ B EXTI2_IRQHandler
+
+ PUBWEAK EXTI3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+ B EXTI3_IRQHandler
+
+ PUBWEAK EXTI4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+ B EXTI4_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+ B DMA1_Channel2_IRQHandler
+
+ PUBWEAK DMA1_Channel3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+ B DMA1_Channel3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+ B DMA1_Channel4_IRQHandler
+
+ PUBWEAK DMA1_Channel5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+ B DMA1_Channel5_IRQHandler
+
+ PUBWEAK DMA1_Channel6_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+ B DMA1_Channel6_IRQHandler
+
+ PUBWEAK DMA1_Channel7_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+ B DMA1_Channel7_IRQHandler
+
+ PUBWEAK ADC1_2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+ADC1_2_IRQHandler
+ B ADC1_2_IRQHandler
+
+ PUBWEAK USB_HP_CAN1_TX_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USB_HP_CAN1_TX_IRQHandler
+ B USB_HP_CAN1_TX_IRQHandler
+
+ PUBWEAK USB_LP_CAN1_RX0_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USB_LP_CAN1_RX0_IRQHandler
+ B USB_LP_CAN1_RX0_IRQHandler
+
+ PUBWEAK CAN1_RX1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN1_RX1_IRQHandler
+ B CAN1_RX1_IRQHandler
+
+ PUBWEAK CAN1_SCE_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN1_SCE_IRQHandler
+ B CAN1_SCE_IRQHandler
+
+ PUBWEAK EXTI9_5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+ B EXTI9_5_IRQHandler
+
+ PUBWEAK TIM1_BRK_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_BRK_IRQHandler
+ B TIM1_BRK_IRQHandler
+
+ PUBWEAK TIM1_UP_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_UP_IRQHandler
+ B TIM1_UP_IRQHandler
+
+ PUBWEAK TIM1_TRG_COM_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_IRQHandler
+ B TIM1_TRG_COM_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM4_IRQHandler
+ B TIM4_IRQHandler
+
+ PUBWEAK I2C1_EV_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+ B I2C1_EV_IRQHandler
+
+ PUBWEAK I2C1_ER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+ B I2C1_ER_IRQHandler
+
+ PUBWEAK I2C2_EV_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C2_EV_IRQHandler
+ B I2C2_EV_IRQHandler
+
+ PUBWEAK I2C2_ER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C2_ER_IRQHandler
+ B I2C2_ER_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK USART3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART3_IRQHandler
+ B USART3_IRQHandler
+
+ PUBWEAK EXTI15_10_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+ B EXTI15_10_IRQHandler
+
+ PUBWEAK RTCAlarm_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+ B RTCAlarm_IRQHandler
+
+ PUBWEAK USBWakeUp_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USBWakeUp_IRQHandler
+ B USBWakeUp_IRQHandler
+
+ END
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md_vl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md_vl.s
new file mode 100644
index 0000000..add509d
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_md_vl.s
@@ -0,0 +1,394 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name : startup_stm32f10x_md_vl.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x Medium Density Value Line Devices vector table
+;* for EWARM toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Configure the clock system
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR
+;* address.
+;* After Reset the Cortex-M3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_IRQHandler ; ADC1
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
+ DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
+ DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD CEC_IRQHandler ; HDMI-CEC
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
+ DCD TIM7_IRQHandler ; TIM7
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK MemManage_Handler
+ SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+ B MemManage_Handler
+
+ PUBWEAK BusFault_Handler
+ SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+ B BusFault_Handler
+
+ PUBWEAK UsageFault_Handler
+ SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+ B UsageFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK DebugMon_Handler
+ SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+ B DebugMon_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+ B PVD_IRQHandler
+
+ PUBWEAK TAMPER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+ B TAMPER_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+ B EXTI0_IRQHandler
+
+ PUBWEAK EXTI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+ B EXTI1_IRQHandler
+
+ PUBWEAK EXTI2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+ B EXTI2_IRQHandler
+
+ PUBWEAK EXTI3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+ B EXTI3_IRQHandler
+
+ PUBWEAK EXTI4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+ B EXTI4_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+ B DMA1_Channel2_IRQHandler
+
+ PUBWEAK DMA1_Channel3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+ B DMA1_Channel3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+ B DMA1_Channel4_IRQHandler
+
+ PUBWEAK DMA1_Channel5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+ B DMA1_Channel5_IRQHandler
+
+ PUBWEAK DMA1_Channel6_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+ B DMA1_Channel6_IRQHandler
+
+ PUBWEAK DMA1_Channel7_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+ B DMA1_Channel7_IRQHandler
+
+ PUBWEAK ADC1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+ADC1_IRQHandler
+ B ADC1_IRQHandler
+
+ PUBWEAK EXTI9_5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+ B EXTI9_5_IRQHandler
+
+ PUBWEAK TIM1_BRK_TIM15_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_BRK_TIM15_IRQHandler
+ B TIM1_BRK_TIM15_IRQHandler
+
+ PUBWEAK TIM1_UP_TIM16_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_UP_TIM16_IRQHandler
+ B TIM1_UP_TIM16_IRQHandler
+
+ PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_TIM17_IRQHandler
+ B TIM1_TRG_COM_TIM17_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM4_IRQHandler
+ B TIM4_IRQHandler
+
+ PUBWEAK I2C1_EV_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+ B I2C1_EV_IRQHandler
+
+ PUBWEAK I2C1_ER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+ B I2C1_ER_IRQHandler
+
+ PUBWEAK I2C2_EV_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C2_EV_IRQHandler
+ B I2C2_EV_IRQHandler
+
+ PUBWEAK I2C2_ER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C2_ER_IRQHandler
+ B I2C2_ER_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK USART3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART3_IRQHandler
+ B USART3_IRQHandler
+
+ PUBWEAK EXTI15_10_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+ B EXTI15_10_IRQHandler
+
+ PUBWEAK RTCAlarm_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+ B RTCAlarm_IRQHandler
+
+ PUBWEAK CEC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CEC_IRQHandler
+ B CEC_IRQHandler
+
+ PUBWEAK TIM6_DAC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM6_DAC_IRQHandler
+ B TIM6_DAC_IRQHandler
+
+ PUBWEAK TIM7_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM7_IRQHandler
+ B TIM7_IRQHandler
+
+ END
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_xl.s b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_xl.s
new file mode 100644
index 0000000..a7f49c5
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/startup/iar/startup_stm32f10x_xl.s
@@ -0,0 +1,496 @@
+;******************** (C) COPYRIGHT 2011 STMicroelectronics ********************
+;* File Name : startup_stm32f10x_xl.s
+;* Author : MCD Application Team
+;* Version : V3.5.0
+;* Date : 11-March-2011
+;* Description : STM32F10x XL-Density Devices vector table for EWARM
+;* toolchain.
+;* This module performs:
+;* - Set the initial SP
+;* - Configure the clock system and the external SRAM
+;* mounted on STM3210E-EVAL board to be used as data
+;* memory (optional, to be enabled by user)
+;* - Set the initial PC == __iar_program_start,
+;* - Set the vector table entries with the exceptions ISR address,
+;* After Reset the Cortex-M3 processor is in Thread mode,
+;* priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+ MODULE ?cstartup
+
+ ;; Forward declaration of sections.
+ SECTION CSTACK:DATA:NOROOT(3)
+
+ SECTION .intvec:CODE:NOROOT(2)
+
+ EXTERN __iar_program_start
+ EXTERN SystemInit
+ PUBLIC __vector_table
+
+ DATA
+
+__vector_table
+ DCD sfe(CSTACK)
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper
+ DCD RTC_IRQHandler ; RTC
+ DCD FLASH_IRQHandler ; Flash
+ DCD RCC_IRQHandler ; RCC
+ DCD EXTI0_IRQHandler ; EXTI Line 0
+ DCD EXTI1_IRQHandler ; EXTI Line 1
+ DCD EXTI2_IRQHandler ; EXTI Line 2
+ DCD EXTI3_IRQHandler ; EXTI Line 3
+ DCD EXTI4_IRQHandler ; EXTI Line 4
+ DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
+ DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
+ DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
+ DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
+ DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
+ DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
+ DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
+ DCD ADC1_2_IRQHandler ; ADC1 & ADC2
+ DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
+ DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
+ DCD CAN1_RX1_IRQHandler ; CAN1 RX1
+ DCD CAN1_SCE_IRQHandler ; CAN1 SCE
+ DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
+ DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
+ DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
+ DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
+ DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
+ DCD TIM2_IRQHandler ; TIM2
+ DCD TIM3_IRQHandler ; TIM3
+ DCD TIM4_IRQHandler ; TIM4
+ DCD I2C1_EV_IRQHandler ; I2C1 Event
+ DCD I2C1_ER_IRQHandler ; I2C1 Error
+ DCD I2C2_EV_IRQHandler ; I2C2 Event
+ DCD I2C2_ER_IRQHandler ; I2C2 Error
+ DCD SPI1_IRQHandler ; SPI1
+ DCD SPI2_IRQHandler ; SPI2
+ DCD USART1_IRQHandler ; USART1
+ DCD USART2_IRQHandler ; USART2
+ DCD USART3_IRQHandler ; USART3
+ DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
+ DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
+ DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
+ DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
+ DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
+ DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
+ DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
+ DCD ADC3_IRQHandler ; ADC3
+ DCD FSMC_IRQHandler ; FSMC
+ DCD SDIO_IRQHandler ; SDIO
+ DCD TIM5_IRQHandler ; TIM5
+ DCD SPI3_IRQHandler ; SPI3
+ DCD UART4_IRQHandler ; UART4
+ DCD UART5_IRQHandler ; UART5
+ DCD TIM6_IRQHandler ; TIM6
+ DCD TIM7_IRQHandler ; TIM7
+ DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
+ DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
+ DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
+ DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+ THUMB
+
+ PUBWEAK Reset_Handler
+ SECTION .text:CODE:REORDER(2)
+Reset_Handler
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__iar_program_start
+ BX R0
+
+ PUBWEAK NMI_Handler
+ SECTION .text:CODE:REORDER(1)
+NMI_Handler
+ B NMI_Handler
+
+ PUBWEAK HardFault_Handler
+ SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+ B HardFault_Handler
+
+ PUBWEAK MemManage_Handler
+ SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+ B MemManage_Handler
+
+ PUBWEAK BusFault_Handler
+ SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+ B BusFault_Handler
+
+ PUBWEAK UsageFault_Handler
+ SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+ B UsageFault_Handler
+
+ PUBWEAK SVC_Handler
+ SECTION .text:CODE:REORDER(1)
+SVC_Handler
+ B SVC_Handler
+
+ PUBWEAK DebugMon_Handler
+ SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+ B DebugMon_Handler
+
+ PUBWEAK PendSV_Handler
+ SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+ B PendSV_Handler
+
+ PUBWEAK SysTick_Handler
+ SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+ B SysTick_Handler
+
+ PUBWEAK WWDG_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+WWDG_IRQHandler
+ B WWDG_IRQHandler
+
+ PUBWEAK PVD_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+PVD_IRQHandler
+ B PVD_IRQHandler
+
+ PUBWEAK TAMPER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TAMPER_IRQHandler
+ B TAMPER_IRQHandler
+
+ PUBWEAK RTC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+ B RTC_IRQHandler
+
+ PUBWEAK FLASH_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+FLASH_IRQHandler
+ B FLASH_IRQHandler
+
+ PUBWEAK RCC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RCC_IRQHandler
+ B RCC_IRQHandler
+
+ PUBWEAK EXTI0_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI0_IRQHandler
+ B EXTI0_IRQHandler
+
+ PUBWEAK EXTI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI1_IRQHandler
+ B EXTI1_IRQHandler
+
+ PUBWEAK EXTI2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI2_IRQHandler
+ B EXTI2_IRQHandler
+
+ PUBWEAK EXTI3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI3_IRQHandler
+ B EXTI3_IRQHandler
+
+ PUBWEAK EXTI4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI4_IRQHandler
+ B EXTI4_IRQHandler
+
+ PUBWEAK DMA1_Channel1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel1_IRQHandler
+ B DMA1_Channel1_IRQHandler
+
+ PUBWEAK DMA1_Channel2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel2_IRQHandler
+ B DMA1_Channel2_IRQHandler
+
+ PUBWEAK DMA1_Channel3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel3_IRQHandler
+ B DMA1_Channel3_IRQHandler
+
+ PUBWEAK DMA1_Channel4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel4_IRQHandler
+ B DMA1_Channel4_IRQHandler
+
+ PUBWEAK DMA1_Channel5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel5_IRQHandler
+ B DMA1_Channel5_IRQHandler
+
+ PUBWEAK DMA1_Channel6_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel6_IRQHandler
+ B DMA1_Channel6_IRQHandler
+
+ PUBWEAK DMA1_Channel7_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA1_Channel7_IRQHandler
+ B DMA1_Channel7_IRQHandler
+
+ PUBWEAK ADC1_2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+ADC1_2_IRQHandler
+ B ADC1_2_IRQHandler
+
+ PUBWEAK USB_HP_CAN1_TX_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USB_HP_CAN1_TX_IRQHandler
+ B USB_HP_CAN1_TX_IRQHandler
+
+ PUBWEAK USB_LP_CAN1_RX0_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USB_LP_CAN1_RX0_IRQHandler
+ B USB_LP_CAN1_RX0_IRQHandler
+
+ PUBWEAK CAN1_RX1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN1_RX1_IRQHandler
+ B CAN1_RX1_IRQHandler
+
+ PUBWEAK CAN1_SCE_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+CAN1_SCE_IRQHandler
+ B CAN1_SCE_IRQHandler
+
+ PUBWEAK EXTI9_5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI9_5_IRQHandler
+ B EXTI9_5_IRQHandler
+
+ PUBWEAK TIM1_BRK_TIM9_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_BRK_TIM9_IRQHandler
+ B TIM1_BRK_TIM9_IRQHandler
+
+ PUBWEAK TIM1_UP_TIM10_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_UP_TIM10_IRQHandler
+ B TIM1_UP_TIM10_IRQHandler
+
+ PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_TRG_COM_TIM11_IRQHandler
+ B TIM1_TRG_COM_TIM11_IRQHandler
+
+ PUBWEAK TIM1_CC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM1_CC_IRQHandler
+ B TIM1_CC_IRQHandler
+
+ PUBWEAK TIM2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM2_IRQHandler
+ B TIM2_IRQHandler
+
+ PUBWEAK TIM3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM3_IRQHandler
+ B TIM3_IRQHandler
+
+ PUBWEAK TIM4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM4_IRQHandler
+ B TIM4_IRQHandler
+
+ PUBWEAK I2C1_EV_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_EV_IRQHandler
+ B I2C1_EV_IRQHandler
+
+ PUBWEAK I2C1_ER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C1_ER_IRQHandler
+ B I2C1_ER_IRQHandler
+
+ PUBWEAK I2C2_EV_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C2_EV_IRQHandler
+ B I2C2_EV_IRQHandler
+
+ PUBWEAK I2C2_ER_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+I2C2_ER_IRQHandler
+ B I2C2_ER_IRQHandler
+
+ PUBWEAK SPI1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI1_IRQHandler
+ B SPI1_IRQHandler
+
+ PUBWEAK SPI2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI2_IRQHandler
+ B SPI2_IRQHandler
+
+ PUBWEAK USART1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART1_IRQHandler
+ B USART1_IRQHandler
+
+ PUBWEAK USART2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART2_IRQHandler
+ B USART2_IRQHandler
+
+ PUBWEAK USART3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USART3_IRQHandler
+ B USART3_IRQHandler
+
+ PUBWEAK EXTI15_10_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+EXTI15_10_IRQHandler
+ B EXTI15_10_IRQHandler
+
+ PUBWEAK RTCAlarm_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+RTCAlarm_IRQHandler
+ B RTCAlarm_IRQHandler
+
+ PUBWEAK USBWakeUp_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+USBWakeUp_IRQHandler
+ B USBWakeUp_IRQHandler
+
+ PUBWEAK TIM8_BRK_TIM12_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM8_BRK_TIM12_IRQHandler
+ B TIM8_BRK_TIM12_IRQHandler
+
+ PUBWEAK TIM8_UP_TIM13_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM8_UP_TIM13_IRQHandler
+ B TIM8_UP_TIM13_IRQHandler
+
+ PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM8_TRG_COM_TIM14_IRQHandler
+ B TIM8_TRG_COM_TIM14_IRQHandler
+
+ PUBWEAK TIM8_CC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM8_CC_IRQHandler
+ B TIM8_CC_IRQHandler
+
+ PUBWEAK ADC3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+ADC3_IRQHandler
+ B ADC3_IRQHandler
+
+ PUBWEAK FSMC_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+FSMC_IRQHandler
+ B FSMC_IRQHandler
+
+ PUBWEAK SDIO_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SDIO_IRQHandler
+ B SDIO_IRQHandler
+
+ PUBWEAK TIM5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM5_IRQHandler
+ B TIM5_IRQHandler
+
+ PUBWEAK SPI3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+SPI3_IRQHandler
+ B SPI3_IRQHandler
+
+ PUBWEAK UART4_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+UART4_IRQHandler
+ B UART4_IRQHandler
+
+ PUBWEAK UART5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+UART5_IRQHandler
+ B UART5_IRQHandler
+
+ PUBWEAK TIM6_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM6_IRQHandler
+ B TIM6_IRQHandler
+
+ PUBWEAK TIM7_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+TIM7_IRQHandler
+ B TIM7_IRQHandler
+
+ PUBWEAK DMA2_Channel1_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel1_IRQHandler
+ B DMA2_Channel1_IRQHandler
+
+ PUBWEAK DMA2_Channel2_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel2_IRQHandler
+ B DMA2_Channel2_IRQHandler
+
+ PUBWEAK DMA2_Channel3_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel3_IRQHandler
+ B DMA2_Channel3_IRQHandler
+
+ PUBWEAK DMA2_Channel4_5_IRQHandler
+ SECTION .text:CODE:REORDER(1)
+DMA2_Channel4_5_IRQHandler
+ B DMA2_Channel4_5_IRQHandler
+
+
+ END
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/stm32f10x.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/stm32f10x.h
new file mode 100644
index 0000000..af0c7c9
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/stm32f10x.h
@@ -0,0 +1,8336 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File.
+ * This file contains all the peripheral register's definitions, bits
+ * definitions and memory mapping for STM32F10x Connectivity line,
+ * High density, High density value line, Medium density,
+ * Medium density Value line, Low density, Low density Value line
+ * and XL-density devices.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The device used in the target application
+ * - To use or not the peripherals drivers in application code(i.e.
+ * code will be based on direct access to peripherals registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_STDPERIPH_DRIVER"
+ * - To change few application-specific parameters such as the HSE
+ * crystal frequency
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripherals registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f10x
+ * @{
+ */
+
+#ifndef __STM32F10x_H
+#define __STM32F10x_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL)
+ /* #define STM32F10X_LD */ /*!< STM32F10X_LD: STM32 Low density devices */
+ /* #define STM32F10X_LD_VL */ /*!< STM32F10X_LD_VL: STM32 Low density Value Line devices */
+ /* #define STM32F10X_MD */ /*!< STM32F10X_MD: STM32 Medium density devices */
+ /* #define STM32F10X_MD_VL */ /*!< STM32F10X_MD_VL: STM32 Medium density Value Line devices */
+ /* #define STM32F10X_HD */ /*!< STM32F10X_HD: STM32 High density devices */
+ /* #define STM32F10X_HD_VL */ /*!< STM32F10X_HD_VL: STM32 High density value line devices */
+ /* #define STM32F10X_XL */ /*!< STM32F10X_XL: STM32 XL-density devices */
+ /* #define STM32F10X_CL */ /*!< STM32F10X_CL: STM32 Connectivity line devices */
+#endif
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+
+ - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers
+ where the Flash memory density ranges between 16 and 32 Kbytes.
+ - Low-density value line devices are STM32F100xx microcontrollers where the Flash
+ memory density ranges between 16 and 32 Kbytes.
+ - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers
+ where the Flash memory density ranges between 64 and 128 Kbytes.
+ - Medium-density value line devices are STM32F100xx microcontrollers where the
+ Flash memory density ranges between 64 and 128 Kbytes.
+ - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
+ the Flash memory density ranges between 256 and 512 Kbytes.
+ - High-density value line devices are STM32F100xx microcontrollers where the
+ Flash memory density ranges between 256 and 512 Kbytes.
+ - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
+ the Flash memory density ranges between 512 and 1024 Kbytes.
+ - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
+ */
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL)
+ #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"
+#endif
+
+#if !defined USE_STDPERIPH_DRIVER
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ /*#define USE_STDPERIPH_DRIVER*/
+#endif
+
+/**
+ * @brief In the following line adjust the value of External High Speed oscillator (HSE)
+ used in your application
+
+ Tip: To avoid modifying this file each time you need to use different HSE, you
+ can define the HSE value in your toolchain compiler preprocessor.
+ */
+#if !defined HSE_VALUE
+ #ifdef STM32F10X_CL
+ #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
+ #else
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+ #endif /* STM32F10X_CL */
+#endif /* HSE_VALUE */
+
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+ Timeout value
+ */
+#define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */
+
+#define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+
+/**
+ * @brief STM32F10x Standard Peripheral Library version number
+ */
+#define __STM32F10X_STDPERIPH_VERSION_MAIN (0x03) /*!< [31:24] main version */
+#define __STM32F10X_STDPERIPH_VERSION_SUB1 (0x05) /*!< [23:16] sub1 version */
+#define __STM32F10X_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32F10X_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F10X_STDPERIPH_VERSION ( (__STM32F10X_STDPERIPH_VERSION_MAIN << 24)\
+ |(__STM32F10X_STDPERIPH_VERSION_SUB1 << 16)\
+ |(__STM32F10X_STDPERIPH_VERSION_SUB2 << 8)\
+ |(__STM32F10X_STDPERIPH_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M3 Processor and Core Peripherals
+ */
+#ifdef STM32F10X_XL
+ #define __MPU_PRESENT 1 /*!< STM32 XL-density devices provide an MPU */
+#else
+ #define __MPU_PRESENT 0 /*!< Other STM32 devices does not provide an MPU */
+#endif /* STM32F10X_XL */
+#define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @brief STM32F10x Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum IRQn
+{
+/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+
+/****** STM32 specific Interrupt Numbers *********************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMPER_IRQn = 2, /*!< Tamper Interrupt */
+ RTC_IRQn = 3, /*!< RTC global Interrupt */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */
+ DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */
+ DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */
+ DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */
+ DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */
+ DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */
+ DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */
+
+#ifdef STM32F10X_LD
+ ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */
+ USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */
+ USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */
+ TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */
+ TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */
+#endif /* STM32F10X_LD */
+
+#ifdef STM32F10X_LD_VL
+ ADC1_IRQn = 18, /*!< ADC1 global Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */
+ TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */
+ TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */
+ TIM7_IRQn = 55 /*!< TIM7 Interrupt */
+#endif /* STM32F10X_LD_VL */
+
+#ifdef STM32F10X_MD
+ ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */
+ USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */
+ USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */
+ TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */
+ TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ USBWakeUp_IRQn = 42 /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */
+#endif /* STM32F10X_MD */
+
+#ifdef STM32F10X_MD_VL
+ ADC1_IRQn = 18, /*!< ADC1 global Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */
+ TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */
+ TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */
+ TIM7_IRQn = 55 /*!< TIM7 Interrupt */
+#endif /* STM32F10X_MD_VL */
+
+#ifdef STM32F10X_HD
+ ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */
+ USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */
+ USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */
+ TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */
+ TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */
+ TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */
+ TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */
+ TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */
+ TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */
+ ADC3_IRQn = 47, /*!< ADC3 global Interrupt */
+ FSMC_IRQn = 48, /*!< FSMC global Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_IRQn = 54, /*!< TIM6 global Interrupt */
+ TIM7_IRQn = 55, /*!< TIM7 global Interrupt */
+ DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */
+#endif /* STM32F10X_HD */
+
+#ifdef STM32F10X_HD_VL
+ ADC1_IRQn = 18, /*!< ADC1 global Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */
+ TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */
+ TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ CEC_IRQn = 42, /*!< HDMI-CEC Interrupt */
+ TIM12_IRQn = 43, /*!< TIM12 global Interrupt */
+ TIM13_IRQn = 44, /*!< TIM13 global Interrupt */
+ TIM14_IRQn = 45, /*!< TIM14 global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 and DAC underrun Interrupt */
+ TIM7_IRQn = 55, /*!< TIM7 Interrupt */
+ DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_5_IRQn = 59, /*!< DMA2 Channel 4 and Channel 5 global Interrupt */
+ DMA2_Channel5_IRQn = 60 /*!< DMA2 Channel 5 global Interrupt (DMA2 Channel 5 is
+ mapped at position 60 only if the MISC_REMAP bit in
+ the AFIO_MAPR2 register is set) */
+#endif /* STM32F10X_HD_VL */
+
+#ifdef STM32F10X_XL
+ ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */
+ USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */
+ USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break Interrupt and TIM9 global Interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global Interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */
+ TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global Interrupt */
+ TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global Interrupt */
+ TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */
+ TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */
+ ADC3_IRQn = 47, /*!< ADC3 global Interrupt */
+ FSMC_IRQn = 48, /*!< FSMC global Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_IRQn = 54, /*!< TIM6 global Interrupt */
+ TIM7_IRQn = 55, /*!< TIM7 global Interrupt */
+ DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */
+#endif /* STM32F10X_XL */
+
+#ifdef STM32F10X_CL
+ ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */
+ CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */
+ CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */
+ TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */
+ TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS WakeUp from suspend through EXTI Line Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_IRQn = 54, /*!< TIM6 global Interrupt */
+ TIM7_IRQn = 55, /*!< TIM7 global Interrupt */
+ DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */
+ DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */
+ ETH_IRQn = 61, /*!< Ethernet global Interrupt */
+ ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */
+ CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */
+ CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */
+ CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */
+ CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */
+ OTG_FS_IRQn = 67 /*!< USB OTG FS global Interrupt */
+#endif /* STM32F10X_CL */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm3.h"
+#include "system_stm32f10x.h"
+#include <stdint.h>
+
+/** @addtogroup Exported_types
+ * @{
+ */
+
+/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */
+typedef int32_t s32;
+typedef int16_t s16;
+typedef int8_t s8;
+
+typedef const int32_t sc32; /*!< Read Only */
+typedef const int16_t sc16; /*!< Read Only */
+typedef const int8_t sc8; /*!< Read Only */
+
+typedef __IO int32_t vs32;
+typedef __IO int16_t vs16;
+typedef __IO int8_t vs8;
+
+typedef __I int32_t vsc32; /*!< Read Only */
+typedef __I int16_t vsc16; /*!< Read Only */
+typedef __I int8_t vsc8; /*!< Read Only */
+
+typedef uint32_t u32;
+typedef uint16_t u16;
+typedef uint8_t u8;
+
+typedef const uint32_t uc32; /*!< Read Only */
+typedef const uint16_t uc16; /*!< Read Only */
+typedef const uint8_t uc8; /*!< Read Only */
+
+typedef __IO uint32_t vu32;
+typedef __IO uint16_t vu16;
+typedef __IO uint8_t vu8;
+
+typedef __I uint32_t vuc32; /*!< Read Only */
+typedef __I uint16_t vuc16; /*!< Read Only */
+typedef __I uint8_t vuc8; /*!< Read Only */
+
+typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus;
+
+typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
+
+/*!< STM32F10x Standard Peripheral Library old definitions (maintained for legacy purpose) */
+#define HSEStartUp_TimeOut HSE_STARTUP_TIMEOUT
+#define HSE_Value HSE_VALUE
+#define HSI_Value HSI_VALUE
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR;
+ __IO uint32_t CR1;
+ __IO uint32_t CR2;
+ __IO uint32_t SMPR1;
+ __IO uint32_t SMPR2;
+ __IO uint32_t JOFR1;
+ __IO uint32_t JOFR2;
+ __IO uint32_t JOFR3;
+ __IO uint32_t JOFR4;
+ __IO uint32_t HTR;
+ __IO uint32_t LTR;
+ __IO uint32_t SQR1;
+ __IO uint32_t SQR2;
+ __IO uint32_t SQR3;
+ __IO uint32_t JSQR;
+ __IO uint32_t JDR1;
+ __IO uint32_t JDR2;
+ __IO uint32_t JDR3;
+ __IO uint32_t JDR4;
+ __IO uint32_t DR;
+} ADC_TypeDef;
+
+/**
+ * @brief Backup Registers
+ */
+
+typedef struct
+{
+ uint32_t RESERVED0;
+ __IO uint16_t DR1;
+ uint16_t RESERVED1;
+ __IO uint16_t DR2;
+ uint16_t RESERVED2;
+ __IO uint16_t DR3;
+ uint16_t RESERVED3;
+ __IO uint16_t DR4;
+ uint16_t RESERVED4;
+ __IO uint16_t DR5;
+ uint16_t RESERVED5;
+ __IO uint16_t DR6;
+ uint16_t RESERVED6;
+ __IO uint16_t DR7;
+ uint16_t RESERVED7;
+ __IO uint16_t DR8;
+ uint16_t RESERVED8;
+ __IO uint16_t DR9;
+ uint16_t RESERVED9;
+ __IO uint16_t DR10;
+ uint16_t RESERVED10;
+ __IO uint16_t RTCCR;
+ uint16_t RESERVED11;
+ __IO uint16_t CR;
+ uint16_t RESERVED12;
+ __IO uint16_t CSR;
+ uint16_t RESERVED13[5];
+ __IO uint16_t DR11;
+ uint16_t RESERVED14;
+ __IO uint16_t DR12;
+ uint16_t RESERVED15;
+ __IO uint16_t DR13;
+ uint16_t RESERVED16;
+ __IO uint16_t DR14;
+ uint16_t RESERVED17;
+ __IO uint16_t DR15;
+ uint16_t RESERVED18;
+ __IO uint16_t DR16;
+ uint16_t RESERVED19;
+ __IO uint16_t DR17;
+ uint16_t RESERVED20;
+ __IO uint16_t DR18;
+ uint16_t RESERVED21;
+ __IO uint16_t DR19;
+ uint16_t RESERVED22;
+ __IO uint16_t DR20;
+ uint16_t RESERVED23;
+ __IO uint16_t DR21;
+ uint16_t RESERVED24;
+ __IO uint16_t DR22;
+ uint16_t RESERVED25;
+ __IO uint16_t DR23;
+ uint16_t RESERVED26;
+ __IO uint16_t DR24;
+ uint16_t RESERVED27;
+ __IO uint16_t DR25;
+ uint16_t RESERVED28;
+ __IO uint16_t DR26;
+ uint16_t RESERVED29;
+ __IO uint16_t DR27;
+ uint16_t RESERVED30;
+ __IO uint16_t DR28;
+ uint16_t RESERVED31;
+ __IO uint16_t DR29;
+ uint16_t RESERVED32;
+ __IO uint16_t DR30;
+ uint16_t RESERVED33;
+ __IO uint16_t DR31;
+ uint16_t RESERVED34;
+ __IO uint16_t DR32;
+ uint16_t RESERVED35;
+ __IO uint16_t DR33;
+ uint16_t RESERVED36;
+ __IO uint16_t DR34;
+ uint16_t RESERVED37;
+ __IO uint16_t DR35;
+ uint16_t RESERVED38;
+ __IO uint16_t DR36;
+ uint16_t RESERVED39;
+ __IO uint16_t DR37;
+ uint16_t RESERVED40;
+ __IO uint16_t DR38;
+ uint16_t RESERVED41;
+ __IO uint16_t DR39;
+ uint16_t RESERVED42;
+ __IO uint16_t DR40;
+ uint16_t RESERVED43;
+ __IO uint16_t DR41;
+ uint16_t RESERVED44;
+ __IO uint16_t DR42;
+ uint16_t RESERVED45;
+} BKP_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t TIR;
+ __IO uint32_t TDTR;
+ __IO uint32_t TDLR;
+ __IO uint32_t TDHR;
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t RIR;
+ __IO uint32_t RDTR;
+ __IO uint32_t RDLR;
+ __IO uint32_t RDHR;
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+
+typedef struct
+{
+ __IO uint32_t FR1;
+ __IO uint32_t FR2;
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+
+typedef struct
+{
+ __IO uint32_t MCR;
+ __IO uint32_t MSR;
+ __IO uint32_t TSR;
+ __IO uint32_t RF0R;
+ __IO uint32_t RF1R;
+ __IO uint32_t IER;
+ __IO uint32_t ESR;
+ __IO uint32_t BTR;
+ uint32_t RESERVED0[88];
+ CAN_TxMailBox_TypeDef sTxMailBox[3];
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2];
+ uint32_t RESERVED1[12];
+ __IO uint32_t FMR;
+ __IO uint32_t FM1R;
+ uint32_t RESERVED2;
+ __IO uint32_t FS1R;
+ uint32_t RESERVED3;
+ __IO uint32_t FFA1R;
+ uint32_t RESERVED4;
+ __IO uint32_t FA1R;
+ uint32_t RESERVED5[8];
+#ifndef STM32F10X_CL
+ CAN_FilterRegister_TypeDef sFilterRegister[14];
+#else
+ CAN_FilterRegister_TypeDef sFilterRegister[28];
+#endif /* STM32F10X_CL */
+} CAN_TypeDef;
+
+/**
+ * @brief Consumer Electronics Control (CEC)
+ */
+typedef struct
+{
+ __IO uint32_t CFGR;
+ __IO uint32_t OAR;
+ __IO uint32_t PRES;
+ __IO uint32_t ESR;
+ __IO uint32_t CSR;
+ __IO uint32_t TXD;
+ __IO uint32_t RXD;
+} CEC_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR;
+ __IO uint8_t IDR;
+ uint8_t RESERVED0;
+ uint16_t RESERVED1;
+ __IO uint32_t CR;
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR;
+ __IO uint32_t SWTRIGR;
+ __IO uint32_t DHR12R1;
+ __IO uint32_t DHR12L1;
+ __IO uint32_t DHR8R1;
+ __IO uint32_t DHR12R2;
+ __IO uint32_t DHR12L2;
+ __IO uint32_t DHR8R2;
+ __IO uint32_t DHR12RD;
+ __IO uint32_t DHR12LD;
+ __IO uint32_t DHR8RD;
+ __IO uint32_t DOR1;
+ __IO uint32_t DOR2;
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ __IO uint32_t SR;
+#endif
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE;
+ __IO uint32_t CR;
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR;
+ __IO uint32_t CNDTR;
+ __IO uint32_t CPAR;
+ __IO uint32_t CMAR;
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR;
+ __IO uint32_t IFCR;
+} DMA_TypeDef;
+
+/**
+ * @brief Ethernet MAC
+ */
+
+typedef struct
+{
+ __IO uint32_t MACCR;
+ __IO uint32_t MACFFR;
+ __IO uint32_t MACHTHR;
+ __IO uint32_t MACHTLR;
+ __IO uint32_t MACMIIAR;
+ __IO uint32_t MACMIIDR;
+ __IO uint32_t MACFCR;
+ __IO uint32_t MACVLANTR; /* 8 */
+ uint32_t RESERVED0[2];
+ __IO uint32_t MACRWUFFR; /* 11 */
+ __IO uint32_t MACPMTCSR;
+ uint32_t RESERVED1[2];
+ __IO uint32_t MACSR; /* 15 */
+ __IO uint32_t MACIMR;
+ __IO uint32_t MACA0HR;
+ __IO uint32_t MACA0LR;
+ __IO uint32_t MACA1HR;
+ __IO uint32_t MACA1LR;
+ __IO uint32_t MACA2HR;
+ __IO uint32_t MACA2LR;
+ __IO uint32_t MACA3HR;
+ __IO uint32_t MACA3LR; /* 24 */
+ uint32_t RESERVED2[40];
+ __IO uint32_t MMCCR; /* 65 */
+ __IO uint32_t MMCRIR;
+ __IO uint32_t MMCTIR;
+ __IO uint32_t MMCRIMR;
+ __IO uint32_t MMCTIMR; /* 69 */
+ uint32_t RESERVED3[14];
+ __IO uint32_t MMCTGFSCCR; /* 84 */
+ __IO uint32_t MMCTGFMSCCR;
+ uint32_t RESERVED4[5];
+ __IO uint32_t MMCTGFCR;
+ uint32_t RESERVED5[10];
+ __IO uint32_t MMCRFCECR;
+ __IO uint32_t MMCRFAECR;
+ uint32_t RESERVED6[10];
+ __IO uint32_t MMCRGUFCR;
+ uint32_t RESERVED7[334];
+ __IO uint32_t PTPTSCR;
+ __IO uint32_t PTPSSIR;
+ __IO uint32_t PTPTSHR;
+ __IO uint32_t PTPTSLR;
+ __IO uint32_t PTPTSHUR;
+ __IO uint32_t PTPTSLUR;
+ __IO uint32_t PTPTSAR;
+ __IO uint32_t PTPTTHR;
+ __IO uint32_t PTPTTLR;
+ uint32_t RESERVED8[567];
+ __IO uint32_t DMABMR;
+ __IO uint32_t DMATPDR;
+ __IO uint32_t DMARPDR;
+ __IO uint32_t DMARDLAR;
+ __IO uint32_t DMATDLAR;
+ __IO uint32_t DMASR;
+ __IO uint32_t DMAOMR;
+ __IO uint32_t DMAIER;
+ __IO uint32_t DMAMFBOCR;
+ uint32_t RESERVED9[9];
+ __IO uint32_t DMACHTDR;
+ __IO uint32_t DMACHRDR;
+ __IO uint32_t DMACHTBAR;
+ __IO uint32_t DMACHRBAR;
+} ETH_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR;
+ __IO uint32_t EMR;
+ __IO uint32_t RTSR;
+ __IO uint32_t FTSR;
+ __IO uint32_t SWIER;
+ __IO uint32_t PR;
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR;
+ __IO uint32_t KEYR;
+ __IO uint32_t OPTKEYR;
+ __IO uint32_t SR;
+ __IO uint32_t CR;
+ __IO uint32_t AR;
+ __IO uint32_t RESERVED;
+ __IO uint32_t OBR;
+ __IO uint32_t WRPR;
+#ifdef STM32F10X_XL
+ uint32_t RESERVED1[8];
+ __IO uint32_t KEYR2;
+ uint32_t RESERVED2;
+ __IO uint32_t SR2;
+ __IO uint32_t CR2;
+ __IO uint32_t AR2;
+#endif /* STM32F10X_XL */
+} FLASH_TypeDef;
+
+/**
+ * @brief Option Bytes Registers
+ */
+
+typedef struct
+{
+ __IO uint16_t RDP;
+ __IO uint16_t USER;
+ __IO uint16_t Data0;
+ __IO uint16_t Data1;
+ __IO uint16_t WRP0;
+ __IO uint16_t WRP1;
+ __IO uint16_t WRP2;
+ __IO uint16_t WRP3;
+} OB_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t BTCR[8];
+} FSMC_Bank1_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank1E
+ */
+
+typedef struct
+{
+ __IO uint32_t BWTR[7];
+} FSMC_Bank1E_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank2
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR2;
+ __IO uint32_t SR2;
+ __IO uint32_t PMEM2;
+ __IO uint32_t PATT2;
+ uint32_t RESERVED0;
+ __IO uint32_t ECCR2;
+} FSMC_Bank2_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank3
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR3;
+ __IO uint32_t SR3;
+ __IO uint32_t PMEM3;
+ __IO uint32_t PATT3;
+ uint32_t RESERVED0;
+ __IO uint32_t ECCR3;
+} FSMC_Bank3_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank4
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR4;
+ __IO uint32_t SR4;
+ __IO uint32_t PMEM4;
+ __IO uint32_t PATT4;
+ __IO uint32_t PIO4;
+} FSMC_Bank4_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t CRL;
+ __IO uint32_t CRH;
+ __IO uint32_t IDR;
+ __IO uint32_t ODR;
+ __IO uint32_t BSRR;
+ __IO uint32_t BRR;
+ __IO uint32_t LCKR;
+} GPIO_TypeDef;
+
+/**
+ * @brief Alternate Function I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t EVCR;
+ __IO uint32_t MAPR;
+ __IO uint32_t EXTICR[4];
+ uint32_t RESERVED0;
+ __IO uint32_t MAPR2;
+} AFIO_TypeDef;
+/**
+ * @brief Inter Integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint16_t CR1;
+ uint16_t RESERVED0;
+ __IO uint16_t CR2;
+ uint16_t RESERVED1;
+ __IO uint16_t OAR1;
+ uint16_t RESERVED2;
+ __IO uint16_t OAR2;
+ uint16_t RESERVED3;
+ __IO uint16_t DR;
+ uint16_t RESERVED4;
+ __IO uint16_t SR1;
+ uint16_t RESERVED5;
+ __IO uint16_t SR2;
+ uint16_t RESERVED6;
+ __IO uint16_t CCR;
+ uint16_t RESERVED7;
+ __IO uint16_t TRISE;
+ uint16_t RESERVED8;
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR;
+ __IO uint32_t PR;
+ __IO uint32_t RLR;
+ __IO uint32_t SR;
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR;
+ __IO uint32_t CSR;
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR;
+ __IO uint32_t CFGR;
+ __IO uint32_t CIR;
+ __IO uint32_t APB2RSTR;
+ __IO uint32_t APB1RSTR;
+ __IO uint32_t AHBENR;
+ __IO uint32_t APB2ENR;
+ __IO uint32_t APB1ENR;
+ __IO uint32_t BDCR;
+ __IO uint32_t CSR;
+
+#ifdef STM32F10X_CL
+ __IO uint32_t AHBRSTR;
+ __IO uint32_t CFGR2;
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ uint32_t RESERVED0;
+ __IO uint32_t CFGR2;
+#endif /* STM32F10X_LD_VL || STM32F10X_MD_VL || STM32F10X_HD_VL */
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint16_t CRH;
+ uint16_t RESERVED0;
+ __IO uint16_t CRL;
+ uint16_t RESERVED1;
+ __IO uint16_t PRLH;
+ uint16_t RESERVED2;
+ __IO uint16_t PRLL;
+ uint16_t RESERVED3;
+ __IO uint16_t DIVH;
+ uint16_t RESERVED4;
+ __IO uint16_t DIVL;
+ uint16_t RESERVED5;
+ __IO uint16_t CNTH;
+ uint16_t RESERVED6;
+ __IO uint16_t CNTL;
+ uint16_t RESERVED7;
+ __IO uint16_t ALRH;
+ uint16_t RESERVED8;
+ __IO uint16_t ALRL;
+ uint16_t RESERVED9;
+} RTC_TypeDef;
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER;
+ __IO uint32_t CLKCR;
+ __IO uint32_t ARG;
+ __IO uint32_t CMD;
+ __I uint32_t RESPCMD;
+ __I uint32_t RESP1;
+ __I uint32_t RESP2;
+ __I uint32_t RESP3;
+ __I uint32_t RESP4;
+ __IO uint32_t DTIMER;
+ __IO uint32_t DLEN;
+ __IO uint32_t DCTRL;
+ __I uint32_t DCOUNT;
+ __I uint32_t STA;
+ __IO uint32_t ICR;
+ __IO uint32_t MASK;
+ uint32_t RESERVED0[2];
+ __I uint32_t FIFOCNT;
+ uint32_t RESERVED1[13];
+ __IO uint32_t FIFO;
+} SDIO_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint16_t CR1;
+ uint16_t RESERVED0;
+ __IO uint16_t CR2;
+ uint16_t RESERVED1;
+ __IO uint16_t SR;
+ uint16_t RESERVED2;
+ __IO uint16_t DR;
+ uint16_t RESERVED3;
+ __IO uint16_t CRCPR;
+ uint16_t RESERVED4;
+ __IO uint16_t RXCRCR;
+ uint16_t RESERVED5;
+ __IO uint16_t TXCRCR;
+ uint16_t RESERVED6;
+ __IO uint16_t I2SCFGR;
+ uint16_t RESERVED7;
+ __IO uint16_t I2SPR;
+ uint16_t RESERVED8;
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint16_t CR1;
+ uint16_t RESERVED0;
+ __IO uint16_t CR2;
+ uint16_t RESERVED1;
+ __IO uint16_t SMCR;
+ uint16_t RESERVED2;
+ __IO uint16_t DIER;
+ uint16_t RESERVED3;
+ __IO uint16_t SR;
+ uint16_t RESERVED4;
+ __IO uint16_t EGR;
+ uint16_t RESERVED5;
+ __IO uint16_t CCMR1;
+ uint16_t RESERVED6;
+ __IO uint16_t CCMR2;
+ uint16_t RESERVED7;
+ __IO uint16_t CCER;
+ uint16_t RESERVED8;
+ __IO uint16_t CNT;
+ uint16_t RESERVED9;
+ __IO uint16_t PSC;
+ uint16_t RESERVED10;
+ __IO uint16_t ARR;
+ uint16_t RESERVED11;
+ __IO uint16_t RCR;
+ uint16_t RESERVED12;
+ __IO uint16_t CCR1;
+ uint16_t RESERVED13;
+ __IO uint16_t CCR2;
+ uint16_t RESERVED14;
+ __IO uint16_t CCR3;
+ uint16_t RESERVED15;
+ __IO uint16_t CCR4;
+ uint16_t RESERVED16;
+ __IO uint16_t BDTR;
+ uint16_t RESERVED17;
+ __IO uint16_t DCR;
+ uint16_t RESERVED18;
+ __IO uint16_t DMAR;
+ uint16_t RESERVED19;
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint16_t SR;
+ uint16_t RESERVED0;
+ __IO uint16_t DR;
+ uint16_t RESERVED1;
+ __IO uint16_t BRR;
+ uint16_t RESERVED2;
+ __IO uint16_t CR1;
+ uint16_t RESERVED3;
+ __IO uint16_t CR2;
+ uint16_t RESERVED4;
+ __IO uint16_t CR3;
+ uint16_t RESERVED5;
+ __IO uint16_t GTPR;
+ uint16_t RESERVED6;
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR;
+ __IO uint32_t CFR;
+ __IO uint32_t SR;
+} WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */
+#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
+
+#define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000)
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000)
+
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x1000)
+#define TIM7_BASE (APB1PERIPH_BASE + 0x1400)
+#define TIM12_BASE (APB1PERIPH_BASE + 0x1800)
+#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00)
+#define TIM14_BASE (APB1PERIPH_BASE + 0x2000)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400)
+#define USART3_BASE (APB1PERIPH_BASE + 0x4800)
+#define UART4_BASE (APB1PERIPH_BASE + 0x4C00)
+#define UART5_BASE (APB1PERIPH_BASE + 0x5000)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800)
+#define CAN1_BASE (APB1PERIPH_BASE + 0x6400)
+#define CAN2_BASE (APB1PERIPH_BASE + 0x6800)
+#define BKP_BASE (APB1PERIPH_BASE + 0x6C00)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000)
+#define DAC_BASE (APB1PERIPH_BASE + 0x7400)
+#define CEC_BASE (APB1PERIPH_BASE + 0x7800)
+
+#define AFIO_BASE (APB2PERIPH_BASE + 0x0000)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x0400)
+#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800)
+#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00)
+#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000)
+#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400)
+#define GPIOE_BASE (APB2PERIPH_BASE + 0x1800)
+#define GPIOF_BASE (APB2PERIPH_BASE + 0x1C00)
+#define GPIOG_BASE (APB2PERIPH_BASE + 0x2000)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2400)
+#define ADC2_BASE (APB2PERIPH_BASE + 0x2800)
+#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000)
+#define TIM8_BASE (APB2PERIPH_BASE + 0x3400)
+#define USART1_BASE (APB2PERIPH_BASE + 0x3800)
+#define ADC3_BASE (APB2PERIPH_BASE + 0x3C00)
+#define TIM15_BASE (APB2PERIPH_BASE + 0x4000)
+#define TIM16_BASE (APB2PERIPH_BASE + 0x4400)
+#define TIM17_BASE (APB2PERIPH_BASE + 0x4800)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4C00)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x5000)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x5400)
+
+#define SDIO_BASE (PERIPH_BASE + 0x18000)
+
+#define DMA1_BASE (AHBPERIPH_BASE + 0x0000)
+#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008)
+#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C)
+#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030)
+#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044)
+#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058)
+#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C)
+#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080)
+#define DMA2_BASE (AHBPERIPH_BASE + 0x0400)
+#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x0408)
+#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x041C)
+#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x0430)
+#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x0444)
+#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x0458)
+#define RCC_BASE (AHBPERIPH_BASE + 0x1000)
+#define CRC_BASE (AHBPERIPH_BASE + 0x3000)
+
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) /*!< Flash registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< Flash Option Bytes base address */
+
+#define ETH_BASE (AHBPERIPH_BASE + 0x8000)
+#define ETH_MAC_BASE (ETH_BASE)
+#define ETH_MMC_BASE (ETH_BASE + 0x0100)
+#define ETH_PTP_BASE (ETH_BASE + 0x0700)
+#define ETH_DMA_BASE (ETH_BASE + 0x1000)
+
+#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) /*!< FSMC Bank1 registers base address */
+#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) /*!< FSMC Bank1E registers base address */
+#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) /*!< FSMC Bank2 registers base address */
+#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) /*!< FSMC Bank3 registers base address */
+#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) /*!< FSMC Bank4 registers base address */
+
+#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM12 ((TIM_TypeDef *) TIM12_BASE)
+#define TIM13 ((TIM_TypeDef *) TIM13_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define UART4 ((USART_TypeDef *) UART4_BASE)
+#define UART5 ((USART_TypeDef *) UART5_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define CAN1 ((CAN_TypeDef *) CAN1_BASE)
+#define CAN2 ((CAN_TypeDef *) CAN2_BASE)
+#define BKP ((BKP_TypeDef *) BKP_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define CEC ((CEC_TypeDef *) CEC_BASE)
+#define AFIO ((AFIO_TypeDef *) AFIO_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2 ((ADC_TypeDef *) ADC2_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define TIM8 ((TIM_TypeDef *) TIM8_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define ADC3 ((ADC_TypeDef *) ADC3_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
+#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE)
+#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE)
+#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE)
+#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE)
+#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define ETH ((ETH_TypeDef *) ETH_BASE)
+#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE)
+#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE)
+#define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE)
+#define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE)
+#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint8_t)0x01) /*!< RESET bit */
+
+/******************************************************************************/
+/* */
+/* Power Control */
+/* */
+/******************************************************************************/
+
+/******************** Bit definition for PWR_CR register ********************/
+#define PWR_CR_LPDS ((uint16_t)0x0001) /*!< Low-Power Deepsleep */
+#define PWR_CR_PDDS ((uint16_t)0x0002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint16_t)0x0004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint16_t)0x0008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint16_t)0x0010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint16_t)0x00E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint16_t)0x0020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint16_t)0x0040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint16_t)0x0080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_2V2 ((uint16_t)0x0000) /*!< PVD level 2.2V */
+#define PWR_CR_PLS_2V3 ((uint16_t)0x0020) /*!< PVD level 2.3V */
+#define PWR_CR_PLS_2V4 ((uint16_t)0x0040) /*!< PVD level 2.4V */
+#define PWR_CR_PLS_2V5 ((uint16_t)0x0060) /*!< PVD level 2.5V */
+#define PWR_CR_PLS_2V6 ((uint16_t)0x0080) /*!< PVD level 2.6V */
+#define PWR_CR_PLS_2V7 ((uint16_t)0x00A0) /*!< PVD level 2.7V */
+#define PWR_CR_PLS_2V8 ((uint16_t)0x00C0) /*!< PVD level 2.8V */
+#define PWR_CR_PLS_2V9 ((uint16_t)0x00E0) /*!< PVD level 2.9V */
+
+#define PWR_CR_DBP ((uint16_t)0x0100) /*!< Disable Backup Domain write protection */
+
+
+/******************* Bit definition for PWR_CSR register ********************/
+#define PWR_CSR_WUF ((uint16_t)0x0001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint16_t)0x0002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint16_t)0x0004) /*!< PVD Output */
+#define PWR_CSR_EWUP ((uint16_t)0x0100) /*!< Enable WKUP pin */
+
+/******************************************************************************/
+/* */
+/* Backup registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for BKP_DR1 register ********************/
+#define BKP_DR1_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR2 register ********************/
+#define BKP_DR2_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR3 register ********************/
+#define BKP_DR3_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR4 register ********************/
+#define BKP_DR4_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR5 register ********************/
+#define BKP_DR5_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR6 register ********************/
+#define BKP_DR6_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR7 register ********************/
+#define BKP_DR7_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR8 register ********************/
+#define BKP_DR8_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR9 register ********************/
+#define BKP_DR9_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR10 register *******************/
+#define BKP_DR10_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR11 register *******************/
+#define BKP_DR11_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR12 register *******************/
+#define BKP_DR12_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR13 register *******************/
+#define BKP_DR13_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR14 register *******************/
+#define BKP_DR14_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR15 register *******************/
+#define BKP_DR15_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR16 register *******************/
+#define BKP_DR16_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR17 register *******************/
+#define BKP_DR17_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/****************** Bit definition for BKP_DR18 register ********************/
+#define BKP_DR18_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR19 register *******************/
+#define BKP_DR19_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR20 register *******************/
+#define BKP_DR20_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR21 register *******************/
+#define BKP_DR21_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR22 register *******************/
+#define BKP_DR22_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR23 register *******************/
+#define BKP_DR23_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR24 register *******************/
+#define BKP_DR24_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR25 register *******************/
+#define BKP_DR25_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR26 register *******************/
+#define BKP_DR26_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR27 register *******************/
+#define BKP_DR27_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR28 register *******************/
+#define BKP_DR28_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR29 register *******************/
+#define BKP_DR29_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR30 register *******************/
+#define BKP_DR30_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR31 register *******************/
+#define BKP_DR31_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR32 register *******************/
+#define BKP_DR32_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR33 register *******************/
+#define BKP_DR33_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR34 register *******************/
+#define BKP_DR34_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR35 register *******************/
+#define BKP_DR35_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR36 register *******************/
+#define BKP_DR36_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR37 register *******************/
+#define BKP_DR37_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR38 register *******************/
+#define BKP_DR38_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR39 register *******************/
+#define BKP_DR39_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR40 register *******************/
+#define BKP_DR40_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR41 register *******************/
+#define BKP_DR41_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/******************* Bit definition for BKP_DR42 register *******************/
+#define BKP_DR42_D ((uint16_t)0xFFFF) /*!< Backup data */
+
+/****************** Bit definition for BKP_RTCCR register *******************/
+#define BKP_RTCCR_CAL ((uint16_t)0x007F) /*!< Calibration value */
+#define BKP_RTCCR_CCO ((uint16_t)0x0080) /*!< Calibration Clock Output */
+#define BKP_RTCCR_ASOE ((uint16_t)0x0100) /*!< Alarm or Second Output Enable */
+#define BKP_RTCCR_ASOS ((uint16_t)0x0200) /*!< Alarm or Second Output Selection */
+
+/******************** Bit definition for BKP_CR register ********************/
+#define BKP_CR_TPE ((uint8_t)0x01) /*!< TAMPER pin enable */
+#define BKP_CR_TPAL ((uint8_t)0x02) /*!< TAMPER pin active level */
+
+/******************* Bit definition for BKP_CSR register ********************/
+#define BKP_CSR_CTE ((uint16_t)0x0001) /*!< Clear Tamper event */
+#define BKP_CSR_CTI ((uint16_t)0x0002) /*!< Clear Tamper Interrupt */
+#define BKP_CSR_TPIE ((uint16_t)0x0004) /*!< TAMPER Pin interrupt enable */
+#define BKP_CSR_TEF ((uint16_t)0x0100) /*!< Tamper Event Flag */
+#define BKP_CSR_TIF ((uint16_t)0x0200) /*!< Tamper Interrupt Flag */
+
+/******************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/******************************************************************************/
+
+/******************** Bit definition for RCC_CR register ********************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+#ifdef STM32F10X_CL
+ #define RCC_CR_PLL2ON ((uint32_t)0x04000000) /*!< PLL2 enable */
+ #define RCC_CR_PLL2RDY ((uint32_t)0x08000000) /*!< PLL2 clock ready flag */
+ #define RCC_CR_PLL3ON ((uint32_t)0x10000000) /*!< PLL3 enable */
+ #define RCC_CR_PLL3RDY ((uint32_t)0x20000000) /*!< PLL3 clock ready flag */
+#endif /* STM32F10X_CL */
+
+/******************* Bit definition for RCC_CFGR register *******************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define RCC_CFGR_ADCPRE ((uint32_t)0x0000C000) /*!< ADCPRE[1:0] bits (ADC prescaler) */
+#define RCC_CFGR_ADCPRE_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define RCC_CFGR_ADCPRE_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+
+#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK2 divided by 2 */
+#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK2 divided by 4 */
+#define RCC_CFGR_ADCPRE_DIV6 ((uint32_t)0x00008000) /*!< PCLK2 divided by 6 */
+#define RCC_CFGR_ADCPRE_DIV8 ((uint32_t)0x0000C000) /*!< PCLK2 divided by 8 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMULL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMULL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMULL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMULL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMULL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#ifdef STM32F10X_CL
+ #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+ #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */
+
+ #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */
+ #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */
+
+ #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock * 4 */
+ #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock * 5 */
+ #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock * 6 */
+ #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock * 7 */
+ #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock * 8 */
+ #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock * 9 */
+ #define RCC_CFGR_PLLMULL6_5 ((uint32_t)0x00340000) /*!< PLL input clock * 6.5 */
+
+ #define RCC_CFGR_OTGFSPRE ((uint32_t)0x00400000) /*!< USB OTG FS prescaler */
+
+/*!< MCO configuration */
+ #define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+ #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+ #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+ #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+ #define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+ #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+ #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+ #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+ #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+ #define RCC_CFGR_MCO_PLLCLK_Div2 ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+ #define RCC_CFGR_MCO_PLL2CLK ((uint32_t)0x08000000) /*!< PLL2 clock selected as MCO source*/
+ #define RCC_CFGR_MCO_PLL3CLK_Div2 ((uint32_t)0x09000000) /*!< PLL3 clock divided by 2 selected as MCO source*/
+ #define RCC_CFGR_MCO_Ext_HSE ((uint32_t)0x0A000000) /*!< XT1 external 3-25 MHz oscillator clock selected as MCO source */
+ #define RCC_CFGR_MCO_PLL3CLK ((uint32_t)0x0B000000) /*!< PLL3 clock selected as MCO source */
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+ #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */
+
+ #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */
+ #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */
+
+ #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+ #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+ #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+ #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+ #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+ #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+ #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+ #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+ #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+ #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+ #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+ #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+ #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+ #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+ #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< MCO configuration */
+ #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */
+ #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+ #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+ #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+
+ #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+ #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+ #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+ #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+ #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+#else
+ #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+ #define RCC_CFGR_PLLSRC_HSE ((uint32_t)0x00010000) /*!< HSE clock selected as PLL entry clock source */
+
+ #define RCC_CFGR_PLLXTPRE_HSE ((uint32_t)0x00000000) /*!< HSE clock not divided for PLL entry */
+ #define RCC_CFGR_PLLXTPRE_HSE_Div2 ((uint32_t)0x00020000) /*!< HSE clock divided by 2 for PLL entry */
+
+ #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+ #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+ #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+ #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+ #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+ #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+ #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+ #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+ #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+ #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+ #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+ #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+ #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+ #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+ #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+ #define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB Device prescaler */
+
+/*!< MCO configuration */
+ #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */
+ #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+ #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+ #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+
+ #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+ #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+ #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+ #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+ #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+#endif /* STM32F10X_CL */
+
+/*!<****************** Bit definition for RCC_CIR register ********************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+#ifdef STM32F10X_CL
+ #define RCC_CIR_PLL2RDYF ((uint32_t)0x00000020) /*!< PLL2 Ready Interrupt flag */
+ #define RCC_CIR_PLL3RDYF ((uint32_t)0x00000040) /*!< PLL3 Ready Interrupt flag */
+ #define RCC_CIR_PLL2RDYIE ((uint32_t)0x00002000) /*!< PLL2 Ready Interrupt Enable */
+ #define RCC_CIR_PLL3RDYIE ((uint32_t)0x00004000) /*!< PLL3 Ready Interrupt Enable */
+ #define RCC_CIR_PLL2RDYC ((uint32_t)0x00200000) /*!< PLL2 Ready Interrupt Clear */
+ #define RCC_CIR_PLL3RDYC ((uint32_t)0x00400000) /*!< PLL3 Ready Interrupt Clear */
+#endif /* STM32F10X_CL */
+
+/***************** Bit definition for RCC_APB2RSTR register *****************/
+#define RCC_APB2RSTR_AFIORST ((uint32_t)0x00000001) /*!< Alternate Function I/O reset */
+#define RCC_APB2RSTR_IOPARST ((uint32_t)0x00000004) /*!< I/O port A reset */
+#define RCC_APB2RSTR_IOPBRST ((uint32_t)0x00000008) /*!< I/O port B reset */
+#define RCC_APB2RSTR_IOPCRST ((uint32_t)0x00000010) /*!< I/O port C reset */
+#define RCC_APB2RSTR_IOPDRST ((uint32_t)0x00000020) /*!< I/O port D reset */
+#define RCC_APB2RSTR_ADC1RST ((uint32_t)0x00000200) /*!< ADC 1 interface reset */
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL)
+#define RCC_APB2RSTR_ADC2RST ((uint32_t)0x00000400) /*!< ADC 2 interface reset */
+#endif
+
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 Timer reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI 1 reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 reset */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 Timer reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 Timer reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 Timer reset */
+#endif
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL)
+ #define RCC_APB2RSTR_IOPERST ((uint32_t)0x00000040) /*!< I/O port E reset */
+#endif /* STM32F10X_LD && STM32F10X_LD_VL */
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_XL)
+ #define RCC_APB2RSTR_IOPFRST ((uint32_t)0x00000080) /*!< I/O port F reset */
+ #define RCC_APB2RSTR_IOPGRST ((uint32_t)0x00000100) /*!< I/O port G reset */
+ #define RCC_APB2RSTR_TIM8RST ((uint32_t)0x00002000) /*!< TIM8 Timer reset */
+ #define RCC_APB2RSTR_ADC3RST ((uint32_t)0x00008000) /*!< ADC3 interface reset */
+#endif
+
+#if defined (STM32F10X_HD_VL)
+ #define RCC_APB2RSTR_IOPFRST ((uint32_t)0x00000080) /*!< I/O port F reset */
+ #define RCC_APB2RSTR_IOPGRST ((uint32_t)0x00000100) /*!< I/O port G reset */
+#endif
+
+#ifdef STM32F10X_XL
+ #define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00080000) /*!< TIM9 Timer reset */
+ #define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00100000) /*!< TIM10 Timer reset */
+ #define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00200000) /*!< TIM11 Timer reset */
+#endif /* STM32F10X_XL */
+
+/***************** Bit definition for RCC_APB1RSTR register *****************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL)
+#define RCC_APB1RSTR_CAN1RST ((uint32_t)0x02000000) /*!< CAN1 reset */
+#endif
+
+#define RCC_APB1RSTR_BKPRST ((uint32_t)0x08000000) /*!< Backup interface reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< Power interface reset */
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL)
+ #define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */
+ #define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI 2 reset */
+ #define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 reset */
+ #define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */
+#endif /* STM32F10X_LD && STM32F10X_LD_VL */
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) || defined (STM32F10X_XL)
+ #define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB Device reset */
+#endif
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_CL) || defined (STM32F10X_XL)
+ #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */
+ #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */
+ #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */
+ #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */
+ #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */
+ #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */
+ #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */
+#endif
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */
+ #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */
+ #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */
+ #define RCC_APB1RSTR_CECRST ((uint32_t)0x40000000) /*!< CEC interface reset */
+#endif
+
+#if defined (STM32F10X_HD_VL)
+ #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */
+ #define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040) /*!< TIM12 Timer reset */
+ #define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080) /*!< TIM13 Timer reset */
+ #define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< TIM14 Timer reset */
+ #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */
+ #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */
+ #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */
+#endif
+
+#ifdef STM32F10X_CL
+ #define RCC_APB1RSTR_CAN2RST ((uint32_t)0x04000000) /*!< CAN2 reset */
+#endif /* STM32F10X_CL */
+
+#ifdef STM32F10X_XL
+ #define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040) /*!< TIM12 Timer reset */
+ #define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080) /*!< TIM13 Timer reset */
+ #define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< TIM14 Timer reset */
+#endif /* STM32F10X_XL */
+
+/****************** Bit definition for RCC_AHBENR register ******************/
+#define RCC_AHBENR_DMA1EN ((uint16_t)0x0001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint16_t)0x0004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint16_t)0x0010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint16_t)0x0040) /*!< CRC clock enable */
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_CL) || defined (STM32F10X_HD_VL)
+ #define RCC_AHBENR_DMA2EN ((uint16_t)0x0002) /*!< DMA2 clock enable */
+#endif
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_XL)
+ #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */
+ #define RCC_AHBENR_SDIOEN ((uint16_t)0x0400) /*!< SDIO clock enable */
+#endif
+
+#if defined (STM32F10X_HD_VL)
+ #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */
+#endif
+
+#ifdef STM32F10X_CL
+ #define RCC_AHBENR_OTGFSEN ((uint32_t)0x00001000) /*!< USB OTG FS clock enable */
+ #define RCC_AHBENR_ETHMACEN ((uint32_t)0x00004000) /*!< ETHERNET MAC clock enable */
+ #define RCC_AHBENR_ETHMACTXEN ((uint32_t)0x00008000) /*!< ETHERNET MAC Tx clock enable */
+ #define RCC_AHBENR_ETHMACRXEN ((uint32_t)0x00010000) /*!< ETHERNET MAC Rx clock enable */
+#endif /* STM32F10X_CL */
+
+/****************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_AFIOEN ((uint32_t)0x00000001) /*!< Alternate Function I/O clock enable */
+#define RCC_APB2ENR_IOPAEN ((uint32_t)0x00000004) /*!< I/O port A clock enable */
+#define RCC_APB2ENR_IOPBEN ((uint32_t)0x00000008) /*!< I/O port B clock enable */
+#define RCC_APB2ENR_IOPCEN ((uint32_t)0x00000010) /*!< I/O port C clock enable */
+#define RCC_APB2ENR_IOPDEN ((uint32_t)0x00000020) /*!< I/O port D clock enable */
+#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000200) /*!< ADC 1 interface clock enable */
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL)
+#define RCC_APB2ENR_ADC2EN ((uint32_t)0x00000400) /*!< ADC 2 interface clock enable */
+#endif
+
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 Timer clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI 1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 Timer clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 Timer clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 Timer clock enable */
+#endif
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL)
+ #define RCC_APB2ENR_IOPEEN ((uint32_t)0x00000040) /*!< I/O port E clock enable */
+#endif /* STM32F10X_LD && STM32F10X_LD_VL */
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_XL)
+ #define RCC_APB2ENR_IOPFEN ((uint32_t)0x00000080) /*!< I/O port F clock enable */
+ #define RCC_APB2ENR_IOPGEN ((uint32_t)0x00000100) /*!< I/O port G clock enable */
+ #define RCC_APB2ENR_TIM8EN ((uint32_t)0x00002000) /*!< TIM8 Timer clock enable */
+ #define RCC_APB2ENR_ADC3EN ((uint32_t)0x00008000) /*!< DMA1 clock enable */
+#endif
+
+#if defined (STM32F10X_HD_VL)
+ #define RCC_APB2ENR_IOPFEN ((uint32_t)0x00000080) /*!< I/O port F clock enable */
+ #define RCC_APB2ENR_IOPGEN ((uint32_t)0x00000100) /*!< I/O port G clock enable */
+#endif
+
+#ifdef STM32F10X_XL
+ #define RCC_APB2ENR_TIM9EN ((uint32_t)0x00080000) /*!< TIM9 Timer clock enable */
+ #define RCC_APB2ENR_TIM10EN ((uint32_t)0x00100000) /*!< TIM10 Timer clock enable */
+ #define RCC_APB2ENR_TIM11EN ((uint32_t)0x00200000) /*!< TIM11 Timer clock enable */
+#endif
+
+/***************** Bit definition for RCC_APB1ENR register ******************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled*/
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL)
+#define RCC_APB1ENR_CAN1EN ((uint32_t)0x02000000) /*!< CAN1 clock enable */
+#endif
+
+#define RCC_APB1ENR_BKPEN ((uint32_t)0x08000000) /*!< Backup interface clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< Power interface clock enable */
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL)
+ #define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */
+ #define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI 2 clock enable */
+ #define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */
+ #define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */
+#endif /* STM32F10X_LD && STM32F10X_LD_VL */
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD)
+ #define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB Device clock enable */
+#endif
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_CL)
+ #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */
+ #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+ #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
+ #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */
+ #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */
+ #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */
+ #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */
+#endif
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+ #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
+ #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */
+ #define RCC_APB1ENR_CECEN ((uint32_t)0x40000000) /*!< CEC interface clock enable */
+#endif
+
+#ifdef STM32F10X_HD_VL
+ #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */
+ #define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040) /*!< TIM12 Timer clock enable */
+ #define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080) /*!< TIM13 Timer clock enable */
+ #define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< TIM14 Timer clock enable */
+ #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */
+ #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */
+ #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */
+#endif /* STM32F10X_HD_VL */
+
+#ifdef STM32F10X_CL
+ #define RCC_APB1ENR_CAN2EN ((uint32_t)0x04000000) /*!< CAN2 clock enable */
+#endif /* STM32F10X_CL */
+
+#ifdef STM32F10X_XL
+ #define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040) /*!< TIM12 Timer clock enable */
+ #define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080) /*!< TIM13 Timer clock enable */
+ #define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< TIM14 Timer clock enable */
+#endif /* STM32F10X_XL */
+
+/******************* Bit definition for RCC_BDCR register *******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC congiguration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register ********************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+#ifdef STM32F10X_CL
+/******************* Bit definition for RCC_AHBRSTR register ****************/
+ #define RCC_AHBRSTR_OTGFSRST ((uint32_t)0x00001000) /*!< USB OTG FS reset */
+ #define RCC_AHBRSTR_ETHMACRST ((uint32_t)0x00004000) /*!< ETHERNET MAC reset */
+
+/******************* Bit definition for RCC_CFGR2 register ******************/
+/*!< PREDIV1 configuration */
+ #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */
+ #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+ #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+ #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+ #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+ #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */
+ #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */
+ #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */
+ #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */
+ #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */
+ #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */
+ #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */
+ #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */
+ #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */
+ #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */
+ #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */
+ #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */
+ #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */
+ #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */
+ #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */
+ #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */
+
+/*!< PREDIV2 configuration */
+ #define RCC_CFGR2_PREDIV2 ((uint32_t)0x000000F0) /*!< PREDIV2[3:0] bits */
+ #define RCC_CFGR2_PREDIV2_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+ #define RCC_CFGR2_PREDIV2_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+ #define RCC_CFGR2_PREDIV2_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+ #define RCC_CFGR2_PREDIV2_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+ #define RCC_CFGR2_PREDIV2_DIV1 ((uint32_t)0x00000000) /*!< PREDIV2 input clock not divided */
+ #define RCC_CFGR2_PREDIV2_DIV2 ((uint32_t)0x00000010) /*!< PREDIV2 input clock divided by 2 */
+ #define RCC_CFGR2_PREDIV2_DIV3 ((uint32_t)0x00000020) /*!< PREDIV2 input clock divided by 3 */
+ #define RCC_CFGR2_PREDIV2_DIV4 ((uint32_t)0x00000030) /*!< PREDIV2 input clock divided by 4 */
+ #define RCC_CFGR2_PREDIV2_DIV5 ((uint32_t)0x00000040) /*!< PREDIV2 input clock divided by 5 */
+ #define RCC_CFGR2_PREDIV2_DIV6 ((uint32_t)0x00000050) /*!< PREDIV2 input clock divided by 6 */
+ #define RCC_CFGR2_PREDIV2_DIV7 ((uint32_t)0x00000060) /*!< PREDIV2 input clock divided by 7 */
+ #define RCC_CFGR2_PREDIV2_DIV8 ((uint32_t)0x00000070) /*!< PREDIV2 input clock divided by 8 */
+ #define RCC_CFGR2_PREDIV2_DIV9 ((uint32_t)0x00000080) /*!< PREDIV2 input clock divided by 9 */
+ #define RCC_CFGR2_PREDIV2_DIV10 ((uint32_t)0x00000090) /*!< PREDIV2 input clock divided by 10 */
+ #define RCC_CFGR2_PREDIV2_DIV11 ((uint32_t)0x000000A0) /*!< PREDIV2 input clock divided by 11 */
+ #define RCC_CFGR2_PREDIV2_DIV12 ((uint32_t)0x000000B0) /*!< PREDIV2 input clock divided by 12 */
+ #define RCC_CFGR2_PREDIV2_DIV13 ((uint32_t)0x000000C0) /*!< PREDIV2 input clock divided by 13 */
+ #define RCC_CFGR2_PREDIV2_DIV14 ((uint32_t)0x000000D0) /*!< PREDIV2 input clock divided by 14 */
+ #define RCC_CFGR2_PREDIV2_DIV15 ((uint32_t)0x000000E0) /*!< PREDIV2 input clock divided by 15 */
+ #define RCC_CFGR2_PREDIV2_DIV16 ((uint32_t)0x000000F0) /*!< PREDIV2 input clock divided by 16 */
+
+/*!< PLL2MUL configuration */
+ #define RCC_CFGR2_PLL2MUL ((uint32_t)0x00000F00) /*!< PLL2MUL[3:0] bits */
+ #define RCC_CFGR2_PLL2MUL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+ #define RCC_CFGR2_PLL2MUL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+ #define RCC_CFGR2_PLL2MUL_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+ #define RCC_CFGR2_PLL2MUL_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+ #define RCC_CFGR2_PLL2MUL8 ((uint32_t)0x00000600) /*!< PLL2 input clock * 8 */
+ #define RCC_CFGR2_PLL2MUL9 ((uint32_t)0x00000700) /*!< PLL2 input clock * 9 */
+ #define RCC_CFGR2_PLL2MUL10 ((uint32_t)0x00000800) /*!< PLL2 input clock * 10 */
+ #define RCC_CFGR2_PLL2MUL11 ((uint32_t)0x00000900) /*!< PLL2 input clock * 11 */
+ #define RCC_CFGR2_PLL2MUL12 ((uint32_t)0x00000A00) /*!< PLL2 input clock * 12 */
+ #define RCC_CFGR2_PLL2MUL13 ((uint32_t)0x00000B00) /*!< PLL2 input clock * 13 */
+ #define RCC_CFGR2_PLL2MUL14 ((uint32_t)0x00000C00) /*!< PLL2 input clock * 14 */
+ #define RCC_CFGR2_PLL2MUL16 ((uint32_t)0x00000E00) /*!< PLL2 input clock * 16 */
+ #define RCC_CFGR2_PLL2MUL20 ((uint32_t)0x00000F00) /*!< PLL2 input clock * 20 */
+
+/*!< PLL3MUL configuration */
+ #define RCC_CFGR2_PLL3MUL ((uint32_t)0x0000F000) /*!< PLL3MUL[3:0] bits */
+ #define RCC_CFGR2_PLL3MUL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+ #define RCC_CFGR2_PLL3MUL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+ #define RCC_CFGR2_PLL3MUL_2 ((uint32_t)0x00004000) /*!< Bit 2 */
+ #define RCC_CFGR2_PLL3MUL_3 ((uint32_t)0x00008000) /*!< Bit 3 */
+
+ #define RCC_CFGR2_PLL3MUL8 ((uint32_t)0x00006000) /*!< PLL3 input clock * 8 */
+ #define RCC_CFGR2_PLL3MUL9 ((uint32_t)0x00007000) /*!< PLL3 input clock * 9 */
+ #define RCC_CFGR2_PLL3MUL10 ((uint32_t)0x00008000) /*!< PLL3 input clock * 10 */
+ #define RCC_CFGR2_PLL3MUL11 ((uint32_t)0x00009000) /*!< PLL3 input clock * 11 */
+ #define RCC_CFGR2_PLL3MUL12 ((uint32_t)0x0000A000) /*!< PLL3 input clock * 12 */
+ #define RCC_CFGR2_PLL3MUL13 ((uint32_t)0x0000B000) /*!< PLL3 input clock * 13 */
+ #define RCC_CFGR2_PLL3MUL14 ((uint32_t)0x0000C000) /*!< PLL3 input clock * 14 */
+ #define RCC_CFGR2_PLL3MUL16 ((uint32_t)0x0000E000) /*!< PLL3 input clock * 16 */
+ #define RCC_CFGR2_PLL3MUL20 ((uint32_t)0x0000F000) /*!< PLL3 input clock * 20 */
+
+ #define RCC_CFGR2_PREDIV1SRC ((uint32_t)0x00010000) /*!< PREDIV1 entry clock source */
+ #define RCC_CFGR2_PREDIV1SRC_PLL2 ((uint32_t)0x00010000) /*!< PLL2 selected as PREDIV1 entry clock source */
+ #define RCC_CFGR2_PREDIV1SRC_HSE ((uint32_t)0x00000000) /*!< HSE selected as PREDIV1 entry clock source */
+ #define RCC_CFGR2_I2S2SRC ((uint32_t)0x00020000) /*!< I2S2 entry clock source */
+ #define RCC_CFGR2_I2S3SRC ((uint32_t)0x00040000) /*!< I2S3 clock source */
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/******************* Bit definition for RCC_CFGR2 register ******************/
+/*!< PREDIV1 configuration */
+ #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */
+ #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+ #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+ #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+ #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+ #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */
+ #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */
+ #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */
+ #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */
+ #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */
+ #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */
+ #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */
+ #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */
+ #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */
+ #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */
+ #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */
+ #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */
+ #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */
+ #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */
+ #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */
+ #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */
+#endif
+
+/******************************************************************************/
+/* */
+/* General Purpose and Alternate Function I/O */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for GPIO_CRL register *******************/
+#define GPIO_CRL_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */
+
+#define GPIO_CRL_MODE0 ((uint32_t)0x00000003) /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */
+#define GPIO_CRL_MODE0_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define GPIO_CRL_MODE0_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define GPIO_CRL_MODE1 ((uint32_t)0x00000030) /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */
+#define GPIO_CRL_MODE1_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define GPIO_CRL_MODE1_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+
+#define GPIO_CRL_MODE2 ((uint32_t)0x00000300) /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */
+#define GPIO_CRL_MODE2_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define GPIO_CRL_MODE2_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define GPIO_CRL_MODE3 ((uint32_t)0x00003000) /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */
+#define GPIO_CRL_MODE3_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define GPIO_CRL_MODE3_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define GPIO_CRL_MODE4 ((uint32_t)0x00030000) /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */
+#define GPIO_CRL_MODE4_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define GPIO_CRL_MODE4_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define GPIO_CRL_MODE5 ((uint32_t)0x00300000) /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */
+#define GPIO_CRL_MODE5_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define GPIO_CRL_MODE5_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+
+#define GPIO_CRL_MODE6 ((uint32_t)0x03000000) /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */
+#define GPIO_CRL_MODE6_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define GPIO_CRL_MODE6_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+
+#define GPIO_CRL_MODE7 ((uint32_t)0x30000000) /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */
+#define GPIO_CRL_MODE7_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define GPIO_CRL_MODE7_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+#define GPIO_CRL_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */
+
+#define GPIO_CRL_CNF0 ((uint32_t)0x0000000C) /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */
+#define GPIO_CRL_CNF0_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define GPIO_CRL_CNF0_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define GPIO_CRL_CNF1 ((uint32_t)0x000000C0) /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */
+#define GPIO_CRL_CNF1_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define GPIO_CRL_CNF1_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+
+#define GPIO_CRL_CNF2 ((uint32_t)0x00000C00) /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */
+#define GPIO_CRL_CNF2_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define GPIO_CRL_CNF2_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define GPIO_CRL_CNF3 ((uint32_t)0x0000C000) /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */
+#define GPIO_CRL_CNF3_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define GPIO_CRL_CNF3_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+
+#define GPIO_CRL_CNF4 ((uint32_t)0x000C0000) /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */
+#define GPIO_CRL_CNF4_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define GPIO_CRL_CNF4_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+
+#define GPIO_CRL_CNF5 ((uint32_t)0x00C00000) /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */
+#define GPIO_CRL_CNF5_0 ((uint32_t)0x00400000) /*!< Bit 0 */
+#define GPIO_CRL_CNF5_1 ((uint32_t)0x00800000) /*!< Bit 1 */
+
+#define GPIO_CRL_CNF6 ((uint32_t)0x0C000000) /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */
+#define GPIO_CRL_CNF6_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define GPIO_CRL_CNF6_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+
+#define GPIO_CRL_CNF7 ((uint32_t)0xC0000000) /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */
+#define GPIO_CRL_CNF7_0 ((uint32_t)0x40000000) /*!< Bit 0 */
+#define GPIO_CRL_CNF7_1 ((uint32_t)0x80000000) /*!< Bit 1 */
+
+/******************* Bit definition for GPIO_CRH register *******************/
+#define GPIO_CRH_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */
+
+#define GPIO_CRH_MODE8 ((uint32_t)0x00000003) /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */
+#define GPIO_CRH_MODE8_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define GPIO_CRH_MODE8_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define GPIO_CRH_MODE9 ((uint32_t)0x00000030) /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */
+#define GPIO_CRH_MODE9_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define GPIO_CRH_MODE9_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+
+#define GPIO_CRH_MODE10 ((uint32_t)0x00000300) /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */
+#define GPIO_CRH_MODE10_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define GPIO_CRH_MODE10_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define GPIO_CRH_MODE11 ((uint32_t)0x00003000) /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */
+#define GPIO_CRH_MODE11_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define GPIO_CRH_MODE11_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define GPIO_CRH_MODE12 ((uint32_t)0x00030000) /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */
+#define GPIO_CRH_MODE12_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define GPIO_CRH_MODE12_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define GPIO_CRH_MODE13 ((uint32_t)0x00300000) /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */
+#define GPIO_CRH_MODE13_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define GPIO_CRH_MODE13_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+
+#define GPIO_CRH_MODE14 ((uint32_t)0x03000000) /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */
+#define GPIO_CRH_MODE14_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define GPIO_CRH_MODE14_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+
+#define GPIO_CRH_MODE15 ((uint32_t)0x30000000) /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */
+#define GPIO_CRH_MODE15_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define GPIO_CRH_MODE15_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+#define GPIO_CRH_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */
+
+#define GPIO_CRH_CNF8 ((uint32_t)0x0000000C) /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */
+#define GPIO_CRH_CNF8_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define GPIO_CRH_CNF8_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define GPIO_CRH_CNF9 ((uint32_t)0x000000C0) /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */
+#define GPIO_CRH_CNF9_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define GPIO_CRH_CNF9_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+
+#define GPIO_CRH_CNF10 ((uint32_t)0x00000C00) /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */
+#define GPIO_CRH_CNF10_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define GPIO_CRH_CNF10_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define GPIO_CRH_CNF11 ((uint32_t)0x0000C000) /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */
+#define GPIO_CRH_CNF11_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define GPIO_CRH_CNF11_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+
+#define GPIO_CRH_CNF12 ((uint32_t)0x000C0000) /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */
+#define GPIO_CRH_CNF12_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define GPIO_CRH_CNF12_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+
+#define GPIO_CRH_CNF13 ((uint32_t)0x00C00000) /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */
+#define GPIO_CRH_CNF13_0 ((uint32_t)0x00400000) /*!< Bit 0 */
+#define GPIO_CRH_CNF13_1 ((uint32_t)0x00800000) /*!< Bit 1 */
+
+#define GPIO_CRH_CNF14 ((uint32_t)0x0C000000) /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */
+#define GPIO_CRH_CNF14_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define GPIO_CRH_CNF14_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+
+#define GPIO_CRH_CNF15 ((uint32_t)0xC0000000) /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */
+#define GPIO_CRH_CNF15_0 ((uint32_t)0x40000000) /*!< Bit 0 */
+#define GPIO_CRH_CNF15_1 ((uint32_t)0x80000000) /*!< Bit 1 */
+
+/*!<****************** Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_IDR0 ((uint16_t)0x0001) /*!< Port input data, bit 0 */
+#define GPIO_IDR_IDR1 ((uint16_t)0x0002) /*!< Port input data, bit 1 */
+#define GPIO_IDR_IDR2 ((uint16_t)0x0004) /*!< Port input data, bit 2 */
+#define GPIO_IDR_IDR3 ((uint16_t)0x0008) /*!< Port input data, bit 3 */
+#define GPIO_IDR_IDR4 ((uint16_t)0x0010) /*!< Port input data, bit 4 */
+#define GPIO_IDR_IDR5 ((uint16_t)0x0020) /*!< Port input data, bit 5 */
+#define GPIO_IDR_IDR6 ((uint16_t)0x0040) /*!< Port input data, bit 6 */
+#define GPIO_IDR_IDR7 ((uint16_t)0x0080) /*!< Port input data, bit 7 */
+#define GPIO_IDR_IDR8 ((uint16_t)0x0100) /*!< Port input data, bit 8 */
+#define GPIO_IDR_IDR9 ((uint16_t)0x0200) /*!< Port input data, bit 9 */
+#define GPIO_IDR_IDR10 ((uint16_t)0x0400) /*!< Port input data, bit 10 */
+#define GPIO_IDR_IDR11 ((uint16_t)0x0800) /*!< Port input data, bit 11 */
+#define GPIO_IDR_IDR12 ((uint16_t)0x1000) /*!< Port input data, bit 12 */
+#define GPIO_IDR_IDR13 ((uint16_t)0x2000) /*!< Port input data, bit 13 */
+#define GPIO_IDR_IDR14 ((uint16_t)0x4000) /*!< Port input data, bit 14 */
+#define GPIO_IDR_IDR15 ((uint16_t)0x8000) /*!< Port input data, bit 15 */
+
+/******************* Bit definition for GPIO_ODR register *******************/
+#define GPIO_ODR_ODR0 ((uint16_t)0x0001) /*!< Port output data, bit 0 */
+#define GPIO_ODR_ODR1 ((uint16_t)0x0002) /*!< Port output data, bit 1 */
+#define GPIO_ODR_ODR2 ((uint16_t)0x0004) /*!< Port output data, bit 2 */
+#define GPIO_ODR_ODR3 ((uint16_t)0x0008) /*!< Port output data, bit 3 */
+#define GPIO_ODR_ODR4 ((uint16_t)0x0010) /*!< Port output data, bit 4 */
+#define GPIO_ODR_ODR5 ((uint16_t)0x0020) /*!< Port output data, bit 5 */
+#define GPIO_ODR_ODR6 ((uint16_t)0x0040) /*!< Port output data, bit 6 */
+#define GPIO_ODR_ODR7 ((uint16_t)0x0080) /*!< Port output data, bit 7 */
+#define GPIO_ODR_ODR8 ((uint16_t)0x0100) /*!< Port output data, bit 8 */
+#define GPIO_ODR_ODR9 ((uint16_t)0x0200) /*!< Port output data, bit 9 */
+#define GPIO_ODR_ODR10 ((uint16_t)0x0400) /*!< Port output data, bit 10 */
+#define GPIO_ODR_ODR11 ((uint16_t)0x0800) /*!< Port output data, bit 11 */
+#define GPIO_ODR_ODR12 ((uint16_t)0x1000) /*!< Port output data, bit 12 */
+#define GPIO_ODR_ODR13 ((uint16_t)0x2000) /*!< Port output data, bit 13 */
+#define GPIO_ODR_ODR14 ((uint16_t)0x4000) /*!< Port output data, bit 14 */
+#define GPIO_ODR_ODR15 ((uint16_t)0x8000) /*!< Port output data, bit 15 */
+
+/****************** Bit definition for GPIO_BSRR register *******************/
+#define GPIO_BSRR_BS0 ((uint32_t)0x00000001) /*!< Port x Set bit 0 */
+#define GPIO_BSRR_BS1 ((uint32_t)0x00000002) /*!< Port x Set bit 1 */
+#define GPIO_BSRR_BS2 ((uint32_t)0x00000004) /*!< Port x Set bit 2 */
+#define GPIO_BSRR_BS3 ((uint32_t)0x00000008) /*!< Port x Set bit 3 */
+#define GPIO_BSRR_BS4 ((uint32_t)0x00000010) /*!< Port x Set bit 4 */
+#define GPIO_BSRR_BS5 ((uint32_t)0x00000020) /*!< Port x Set bit 5 */
+#define GPIO_BSRR_BS6 ((uint32_t)0x00000040) /*!< Port x Set bit 6 */
+#define GPIO_BSRR_BS7 ((uint32_t)0x00000080) /*!< Port x Set bit 7 */
+#define GPIO_BSRR_BS8 ((uint32_t)0x00000100) /*!< Port x Set bit 8 */
+#define GPIO_BSRR_BS9 ((uint32_t)0x00000200) /*!< Port x Set bit 9 */
+#define GPIO_BSRR_BS10 ((uint32_t)0x00000400) /*!< Port x Set bit 10 */
+#define GPIO_BSRR_BS11 ((uint32_t)0x00000800) /*!< Port x Set bit 11 */
+#define GPIO_BSRR_BS12 ((uint32_t)0x00001000) /*!< Port x Set bit 12 */
+#define GPIO_BSRR_BS13 ((uint32_t)0x00002000) /*!< Port x Set bit 13 */
+#define GPIO_BSRR_BS14 ((uint32_t)0x00004000) /*!< Port x Set bit 14 */
+#define GPIO_BSRR_BS15 ((uint32_t)0x00008000) /*!< Port x Set bit 15 */
+
+#define GPIO_BSRR_BR0 ((uint32_t)0x00010000) /*!< Port x Reset bit 0 */
+#define GPIO_BSRR_BR1 ((uint32_t)0x00020000) /*!< Port x Reset bit 1 */
+#define GPIO_BSRR_BR2 ((uint32_t)0x00040000) /*!< Port x Reset bit 2 */
+#define GPIO_BSRR_BR3 ((uint32_t)0x00080000) /*!< Port x Reset bit 3 */
+#define GPIO_BSRR_BR4 ((uint32_t)0x00100000) /*!< Port x Reset bit 4 */
+#define GPIO_BSRR_BR5 ((uint32_t)0x00200000) /*!< Port x Reset bit 5 */
+#define GPIO_BSRR_BR6 ((uint32_t)0x00400000) /*!< Port x Reset bit 6 */
+#define GPIO_BSRR_BR7 ((uint32_t)0x00800000) /*!< Port x Reset bit 7 */
+#define GPIO_BSRR_BR8 ((uint32_t)0x01000000) /*!< Port x Reset bit 8 */
+#define GPIO_BSRR_BR9 ((uint32_t)0x02000000) /*!< Port x Reset bit 9 */
+#define GPIO_BSRR_BR10 ((uint32_t)0x04000000) /*!< Port x Reset bit 10 */
+#define GPIO_BSRR_BR11 ((uint32_t)0x08000000) /*!< Port x Reset bit 11 */
+#define GPIO_BSRR_BR12 ((uint32_t)0x10000000) /*!< Port x Reset bit 12 */
+#define GPIO_BSRR_BR13 ((uint32_t)0x20000000) /*!< Port x Reset bit 13 */
+#define GPIO_BSRR_BR14 ((uint32_t)0x40000000) /*!< Port x Reset bit 14 */
+#define GPIO_BSRR_BR15 ((uint32_t)0x80000000) /*!< Port x Reset bit 15 */
+
+/******************* Bit definition for GPIO_BRR register *******************/
+#define GPIO_BRR_BR0 ((uint16_t)0x0001) /*!< Port x Reset bit 0 */
+#define GPIO_BRR_BR1 ((uint16_t)0x0002) /*!< Port x Reset bit 1 */
+#define GPIO_BRR_BR2 ((uint16_t)0x0004) /*!< Port x Reset bit 2 */
+#define GPIO_BRR_BR3 ((uint16_t)0x0008) /*!< Port x Reset bit 3 */
+#define GPIO_BRR_BR4 ((uint16_t)0x0010) /*!< Port x Reset bit 4 */
+#define GPIO_BRR_BR5 ((uint16_t)0x0020) /*!< Port x Reset bit 5 */
+#define GPIO_BRR_BR6 ((uint16_t)0x0040) /*!< Port x Reset bit 6 */
+#define GPIO_BRR_BR7 ((uint16_t)0x0080) /*!< Port x Reset bit 7 */
+#define GPIO_BRR_BR8 ((uint16_t)0x0100) /*!< Port x Reset bit 8 */
+#define GPIO_BRR_BR9 ((uint16_t)0x0200) /*!< Port x Reset bit 9 */
+#define GPIO_BRR_BR10 ((uint16_t)0x0400) /*!< Port x Reset bit 10 */
+#define GPIO_BRR_BR11 ((uint16_t)0x0800) /*!< Port x Reset bit 11 */
+#define GPIO_BRR_BR12 ((uint16_t)0x1000) /*!< Port x Reset bit 12 */
+#define GPIO_BRR_BR13 ((uint16_t)0x2000) /*!< Port x Reset bit 13 */
+#define GPIO_BRR_BR14 ((uint16_t)0x4000) /*!< Port x Reset bit 14 */
+#define GPIO_BRR_BR15 ((uint16_t)0x8000) /*!< Port x Reset bit 15 */
+
+/****************** Bit definition for GPIO_LCKR register *******************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001) /*!< Port x Lock bit 0 */
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002) /*!< Port x Lock bit 1 */
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004) /*!< Port x Lock bit 2 */
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008) /*!< Port x Lock bit 3 */
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010) /*!< Port x Lock bit 4 */
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020) /*!< Port x Lock bit 5 */
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040) /*!< Port x Lock bit 6 */
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080) /*!< Port x Lock bit 7 */
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100) /*!< Port x Lock bit 8 */
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200) /*!< Port x Lock bit 9 */
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400) /*!< Port x Lock bit 10 */
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800) /*!< Port x Lock bit 11 */
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000) /*!< Port x Lock bit 12 */
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000) /*!< Port x Lock bit 13 */
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000) /*!< Port x Lock bit 14 */
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000) /*!< Port x Lock bit 15 */
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000) /*!< Lock key */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for AFIO_EVCR register *******************/
+#define AFIO_EVCR_PIN ((uint8_t)0x0F) /*!< PIN[3:0] bits (Pin selection) */
+#define AFIO_EVCR_PIN_0 ((uint8_t)0x01) /*!< Bit 0 */
+#define AFIO_EVCR_PIN_1 ((uint8_t)0x02) /*!< Bit 1 */
+#define AFIO_EVCR_PIN_2 ((uint8_t)0x04) /*!< Bit 2 */
+#define AFIO_EVCR_PIN_3 ((uint8_t)0x08) /*!< Bit 3 */
+
+/*!< PIN configuration */
+#define AFIO_EVCR_PIN_PX0 ((uint8_t)0x00) /*!< Pin 0 selected */
+#define AFIO_EVCR_PIN_PX1 ((uint8_t)0x01) /*!< Pin 1 selected */
+#define AFIO_EVCR_PIN_PX2 ((uint8_t)0x02) /*!< Pin 2 selected */
+#define AFIO_EVCR_PIN_PX3 ((uint8_t)0x03) /*!< Pin 3 selected */
+#define AFIO_EVCR_PIN_PX4 ((uint8_t)0x04) /*!< Pin 4 selected */
+#define AFIO_EVCR_PIN_PX5 ((uint8_t)0x05) /*!< Pin 5 selected */
+#define AFIO_EVCR_PIN_PX6 ((uint8_t)0x06) /*!< Pin 6 selected */
+#define AFIO_EVCR_PIN_PX7 ((uint8_t)0x07) /*!< Pin 7 selected */
+#define AFIO_EVCR_PIN_PX8 ((uint8_t)0x08) /*!< Pin 8 selected */
+#define AFIO_EVCR_PIN_PX9 ((uint8_t)0x09) /*!< Pin 9 selected */
+#define AFIO_EVCR_PIN_PX10 ((uint8_t)0x0A) /*!< Pin 10 selected */
+#define AFIO_EVCR_PIN_PX11 ((uint8_t)0x0B) /*!< Pin 11 selected */
+#define AFIO_EVCR_PIN_PX12 ((uint8_t)0x0C) /*!< Pin 12 selected */
+#define AFIO_EVCR_PIN_PX13 ((uint8_t)0x0D) /*!< Pin 13 selected */
+#define AFIO_EVCR_PIN_PX14 ((uint8_t)0x0E) /*!< Pin 14 selected */
+#define AFIO_EVCR_PIN_PX15 ((uint8_t)0x0F) /*!< Pin 15 selected */
+
+#define AFIO_EVCR_PORT ((uint8_t)0x70) /*!< PORT[2:0] bits (Port selection) */
+#define AFIO_EVCR_PORT_0 ((uint8_t)0x10) /*!< Bit 0 */
+#define AFIO_EVCR_PORT_1 ((uint8_t)0x20) /*!< Bit 1 */
+#define AFIO_EVCR_PORT_2 ((uint8_t)0x40) /*!< Bit 2 */
+
+/*!< PORT configuration */
+#define AFIO_EVCR_PORT_PA ((uint8_t)0x00) /*!< Port A selected */
+#define AFIO_EVCR_PORT_PB ((uint8_t)0x10) /*!< Port B selected */
+#define AFIO_EVCR_PORT_PC ((uint8_t)0x20) /*!< Port C selected */
+#define AFIO_EVCR_PORT_PD ((uint8_t)0x30) /*!< Port D selected */
+#define AFIO_EVCR_PORT_PE ((uint8_t)0x40) /*!< Port E selected */
+
+#define AFIO_EVCR_EVOE ((uint8_t)0x80) /*!< Event Output Enable */
+
+/****************** Bit definition for AFIO_MAPR register *******************/
+#define AFIO_MAPR_SPI1_REMAP ((uint32_t)0x00000001) /*!< SPI1 remapping */
+#define AFIO_MAPR_I2C1_REMAP ((uint32_t)0x00000002) /*!< I2C1 remapping */
+#define AFIO_MAPR_USART1_REMAP ((uint32_t)0x00000004) /*!< USART1 remapping */
+#define AFIO_MAPR_USART2_REMAP ((uint32_t)0x00000008) /*!< USART2 remapping */
+
+#define AFIO_MAPR_USART3_REMAP ((uint32_t)0x00000030) /*!< USART3_REMAP[1:0] bits (USART3 remapping) */
+#define AFIO_MAPR_USART3_REMAP_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define AFIO_MAPR_USART3_REMAP_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+
+/* USART3_REMAP configuration */
+#define AFIO_MAPR_USART3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */
+#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP ((uint32_t)0x00000010) /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */
+#define AFIO_MAPR_USART3_REMAP_FULLREMAP ((uint32_t)0x00000030) /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */
+
+#define AFIO_MAPR_TIM1_REMAP ((uint32_t)0x000000C0) /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */
+#define AFIO_MAPR_TIM1_REMAP_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define AFIO_MAPR_TIM1_REMAP_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+
+/*!< TIM1_REMAP configuration */
+#define AFIO_MAPR_TIM1_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */
+#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP ((uint32_t)0x00000040) /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */
+#define AFIO_MAPR_TIM1_REMAP_FULLREMAP ((uint32_t)0x000000C0) /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */
+
+#define AFIO_MAPR_TIM2_REMAP ((uint32_t)0x00000300) /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */
+#define AFIO_MAPR_TIM2_REMAP_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define AFIO_MAPR_TIM2_REMAP_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< TIM2_REMAP configuration */
+#define AFIO_MAPR_TIM2_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */
+#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 ((uint32_t)0x00000100) /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */
+#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 ((uint32_t)0x00000200) /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */
+#define AFIO_MAPR_TIM2_REMAP_FULLREMAP ((uint32_t)0x00000300) /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */
+
+#define AFIO_MAPR_TIM3_REMAP ((uint32_t)0x00000C00) /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */
+#define AFIO_MAPR_TIM3_REMAP_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define AFIO_MAPR_TIM3_REMAP_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+/*!< TIM3_REMAP configuration */
+#define AFIO_MAPR_TIM3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */
+#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP ((uint32_t)0x00000800) /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */
+#define AFIO_MAPR_TIM3_REMAP_FULLREMAP ((uint32_t)0x00000C00) /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */
+
+#define AFIO_MAPR_TIM4_REMAP ((uint32_t)0x00001000) /*!< TIM4_REMAP bit (TIM4 remapping) */
+
+#define AFIO_MAPR_CAN_REMAP ((uint32_t)0x00006000) /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */
+#define AFIO_MAPR_CAN_REMAP_0 ((uint32_t)0x00002000) /*!< Bit 0 */
+#define AFIO_MAPR_CAN_REMAP_1 ((uint32_t)0x00004000) /*!< Bit 1 */
+
+/*!< CAN_REMAP configuration */
+#define AFIO_MAPR_CAN_REMAP_REMAP1 ((uint32_t)0x00000000) /*!< CANRX mapped to PA11, CANTX mapped to PA12 */
+#define AFIO_MAPR_CAN_REMAP_REMAP2 ((uint32_t)0x00004000) /*!< CANRX mapped to PB8, CANTX mapped to PB9 */
+#define AFIO_MAPR_CAN_REMAP_REMAP3 ((uint32_t)0x00006000) /*!< CANRX mapped to PD0, CANTX mapped to PD1 */
+
+#define AFIO_MAPR_PD01_REMAP ((uint32_t)0x00008000) /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */
+#define AFIO_MAPR_TIM5CH4_IREMAP ((uint32_t)0x00010000) /*!< TIM5 Channel4 Internal Remap */
+#define AFIO_MAPR_ADC1_ETRGINJ_REMAP ((uint32_t)0x00020000) /*!< ADC 1 External Trigger Injected Conversion remapping */
+#define AFIO_MAPR_ADC1_ETRGREG_REMAP ((uint32_t)0x00040000) /*!< ADC 1 External Trigger Regular Conversion remapping */
+#define AFIO_MAPR_ADC2_ETRGINJ_REMAP ((uint32_t)0x00080000) /*!< ADC 2 External Trigger Injected Conversion remapping */
+#define AFIO_MAPR_ADC2_ETRGREG_REMAP ((uint32_t)0x00100000) /*!< ADC 2 External Trigger Regular Conversion remapping */
+
+/*!< SWJ_CFG configuration */
+#define AFIO_MAPR_SWJ_CFG ((uint32_t)0x07000000) /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */
+#define AFIO_MAPR_SWJ_CFG_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define AFIO_MAPR_SWJ_CFG_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define AFIO_MAPR_SWJ_CFG_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+
+#define AFIO_MAPR_SWJ_CFG_RESET ((uint32_t)0x00000000) /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */
+#define AFIO_MAPR_SWJ_CFG_NOJNTRST ((uint32_t)0x01000000) /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */
+#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE ((uint32_t)0x02000000) /*!< JTAG-DP Disabled and SW-DP Enabled */
+#define AFIO_MAPR_SWJ_CFG_DISABLE ((uint32_t)0x04000000) /*!< JTAG-DP Disabled and SW-DP Disabled */
+
+#ifdef STM32F10X_CL
+/*!< ETH_REMAP configuration */
+ #define AFIO_MAPR_ETH_REMAP ((uint32_t)0x00200000) /*!< SPI3_REMAP bit (Ethernet MAC I/O remapping) */
+
+/*!< CAN2_REMAP configuration */
+ #define AFIO_MAPR_CAN2_REMAP ((uint32_t)0x00400000) /*!< CAN2_REMAP bit (CAN2 I/O remapping) */
+
+/*!< MII_RMII_SEL configuration */
+ #define AFIO_MAPR_MII_RMII_SEL ((uint32_t)0x00800000) /*!< MII_RMII_SEL bit (Ethernet MII or RMII selection) */
+
+/*!< SPI3_REMAP configuration */
+ #define AFIO_MAPR_SPI3_REMAP ((uint32_t)0x10000000) /*!< SPI3_REMAP bit (SPI3 remapping) */
+
+/*!< TIM2ITR1_IREMAP configuration */
+ #define AFIO_MAPR_TIM2ITR1_IREMAP ((uint32_t)0x20000000) /*!< TIM2ITR1_IREMAP bit (TIM2 internal trigger 1 remapping) */
+
+/*!< PTP_PPS_REMAP configuration */
+ #define AFIO_MAPR_PTP_PPS_REMAP ((uint32_t)0x40000000) /*!< PTP_PPS_REMAP bit (Ethernet PTP PPS remapping) */
+#endif
+
+/***************** Bit definition for AFIO_EXTICR1 register *****************/
+#define AFIO_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define AFIO_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define AFIO_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define AFIO_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/*!< EXTI0 configuration */
+#define AFIO_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define AFIO_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define AFIO_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define AFIO_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define AFIO_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */
+#define AFIO_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+#define AFIO_EXTICR1_EXTI0_PG ((uint16_t)0x0006) /*!< PG[0] pin */
+
+/*!< EXTI1 configuration */
+#define AFIO_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define AFIO_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define AFIO_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define AFIO_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define AFIO_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */
+#define AFIO_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+#define AFIO_EXTICR1_EXTI1_PG ((uint16_t)0x0060) /*!< PG[1] pin */
+
+/*!< EXTI2 configuration */
+#define AFIO_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define AFIO_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define AFIO_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define AFIO_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define AFIO_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */
+#define AFIO_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+#define AFIO_EXTICR1_EXTI2_PG ((uint16_t)0x0600) /*!< PG[2] pin */
+
+/*!< EXTI3 configuration */
+#define AFIO_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define AFIO_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define AFIO_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define AFIO_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define AFIO_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */
+#define AFIO_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+#define AFIO_EXTICR1_EXTI3_PG ((uint16_t)0x6000) /*!< PG[3] pin */
+
+/***************** Bit definition for AFIO_EXTICR2 register *****************/
+#define AFIO_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define AFIO_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define AFIO_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define AFIO_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/*!< EXTI4 configuration */
+#define AFIO_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define AFIO_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define AFIO_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define AFIO_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define AFIO_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */
+#define AFIO_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+#define AFIO_EXTICR2_EXTI4_PG ((uint16_t)0x0006) /*!< PG[4] pin */
+
+/* EXTI5 configuration */
+#define AFIO_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define AFIO_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define AFIO_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define AFIO_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define AFIO_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */
+#define AFIO_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+#define AFIO_EXTICR2_EXTI5_PG ((uint16_t)0x0060) /*!< PG[5] pin */
+
+/*!< EXTI6 configuration */
+#define AFIO_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define AFIO_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define AFIO_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define AFIO_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define AFIO_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */
+#define AFIO_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+#define AFIO_EXTICR2_EXTI6_PG ((uint16_t)0x0600) /*!< PG[6] pin */
+
+/*!< EXTI7 configuration */
+#define AFIO_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define AFIO_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define AFIO_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define AFIO_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define AFIO_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */
+#define AFIO_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+#define AFIO_EXTICR2_EXTI7_PG ((uint16_t)0x6000) /*!< PG[7] pin */
+
+/***************** Bit definition for AFIO_EXTICR3 register *****************/
+#define AFIO_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define AFIO_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define AFIO_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define AFIO_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/*!< EXTI8 configuration */
+#define AFIO_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define AFIO_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define AFIO_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define AFIO_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define AFIO_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */
+#define AFIO_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */
+#define AFIO_EXTICR3_EXTI8_PG ((uint16_t)0x0006) /*!< PG[8] pin */
+
+/*!< EXTI9 configuration */
+#define AFIO_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define AFIO_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define AFIO_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define AFIO_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define AFIO_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */
+#define AFIO_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+#define AFIO_EXTICR3_EXTI9_PG ((uint16_t)0x0060) /*!< PG[9] pin */
+
+/*!< EXTI10 configuration */
+#define AFIO_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define AFIO_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define AFIO_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define AFIO_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */
+#define AFIO_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PE[10] pin */
+#define AFIO_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+#define AFIO_EXTICR3_EXTI10_PG ((uint16_t)0x0600) /*!< PG[10] pin */
+
+/*!< EXTI11 configuration */
+#define AFIO_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define AFIO_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define AFIO_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define AFIO_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define AFIO_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */
+#define AFIO_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */
+#define AFIO_EXTICR3_EXTI11_PG ((uint16_t)0x6000) /*!< PG[11] pin */
+
+/***************** Bit definition for AFIO_EXTICR4 register *****************/
+#define AFIO_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define AFIO_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define AFIO_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define AFIO_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/* EXTI12 configuration */
+#define AFIO_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define AFIO_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define AFIO_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define AFIO_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define AFIO_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */
+#define AFIO_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */
+#define AFIO_EXTICR4_EXTI12_PG ((uint16_t)0x0006) /*!< PG[12] pin */
+
+/* EXTI13 configuration */
+#define AFIO_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define AFIO_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define AFIO_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define AFIO_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define AFIO_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */
+#define AFIO_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */
+#define AFIO_EXTICR4_EXTI13_PG ((uint16_t)0x0060) /*!< PG[13] pin */
+
+/*!< EXTI14 configuration */
+#define AFIO_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define AFIO_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define AFIO_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define AFIO_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define AFIO_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */
+#define AFIO_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */
+#define AFIO_EXTICR4_EXTI14_PG ((uint16_t)0x0600) /*!< PG[14] pin */
+
+/*!< EXTI15 configuration */
+#define AFIO_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define AFIO_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define AFIO_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define AFIO_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define AFIO_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */
+#define AFIO_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */
+#define AFIO_EXTICR4_EXTI15_PG ((uint16_t)0x6000) /*!< PG[15] pin */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/****************** Bit definition for AFIO_MAPR2 register ******************/
+#define AFIO_MAPR2_TIM15_REMAP ((uint32_t)0x00000001) /*!< TIM15 remapping */
+#define AFIO_MAPR2_TIM16_REMAP ((uint32_t)0x00000002) /*!< TIM16 remapping */
+#define AFIO_MAPR2_TIM17_REMAP ((uint32_t)0x00000004) /*!< TIM17 remapping */
+#define AFIO_MAPR2_CEC_REMAP ((uint32_t)0x00000008) /*!< CEC remapping */
+#define AFIO_MAPR2_TIM1_DMA_REMAP ((uint32_t)0x00000010) /*!< TIM1_DMA remapping */
+#endif
+
+#ifdef STM32F10X_HD_VL
+#define AFIO_MAPR2_TIM13_REMAP ((uint32_t)0x00000100) /*!< TIM13 remapping */
+#define AFIO_MAPR2_TIM14_REMAP ((uint32_t)0x00000200) /*!< TIM14 remapping */
+#define AFIO_MAPR2_FSMC_NADV_REMAP ((uint32_t)0x00000400) /*!< FSMC NADV remapping */
+#define AFIO_MAPR2_TIM67_DAC_DMA_REMAP ((uint32_t)0x00000800) /*!< TIM6/TIM7 and DAC DMA remapping */
+#define AFIO_MAPR2_TIM12_REMAP ((uint32_t)0x00001000) /*!< TIM12 remapping */
+#define AFIO_MAPR2_MISC_REMAP ((uint32_t)0x00002000) /*!< Miscellaneous remapping */
+#endif
+
+#ifdef STM32F10X_XL
+/****************** Bit definition for AFIO_MAPR2 register ******************/
+#define AFIO_MAPR2_TIM9_REMAP ((uint32_t)0x00000020) /*!< TIM9 remapping */
+#define AFIO_MAPR2_TIM10_REMAP ((uint32_t)0x00000040) /*!< TIM10 remapping */
+#define AFIO_MAPR2_TIM11_REMAP ((uint32_t)0x00000080) /*!< TIM11 remapping */
+#define AFIO_MAPR2_TIM13_REMAP ((uint32_t)0x00000100) /*!< TIM13 remapping */
+#define AFIO_MAPR2_TIM14_REMAP ((uint32_t)0x00000200) /*!< TIM14 remapping */
+#define AFIO_MAPR2_FSMC_NADV_REMAP ((uint32_t)0x00000400) /*!< FSMC NADV remapping */
+#endif
+
+/******************************************************************************/
+/* */
+/* SystemTick */
+/* */
+/******************************************************************************/
+
+/***************** Bit definition for SysTick_CTRL register *****************/
+#define SysTick_CTRL_ENABLE ((uint32_t)0x00000001) /*!< Counter enable */
+#define SysTick_CTRL_TICKINT ((uint32_t)0x00000002) /*!< Counting down to 0 pends the SysTick handler */
+#define SysTick_CTRL_CLKSOURCE ((uint32_t)0x00000004) /*!< Clock source */
+#define SysTick_CTRL_COUNTFLAG ((uint32_t)0x00010000) /*!< Count Flag */
+
+/***************** Bit definition for SysTick_LOAD register *****************/
+#define SysTick_LOAD_RELOAD ((uint32_t)0x00FFFFFF) /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */
+
+/***************** Bit definition for SysTick_VAL register ******************/
+#define SysTick_VAL_CURRENT ((uint32_t)0x00FFFFFF) /*!< Current value at the time the register is accessed */
+
+/***************** Bit definition for SysTick_CALIB register ****************/
+#define SysTick_CALIB_TENMS ((uint32_t)0x00FFFFFF) /*!< Reload value to use for 10ms timing */
+#define SysTick_CALIB_SKEW ((uint32_t)0x40000000) /*!< Calibration value is not exactly 10 ms */
+#define SysTick_CALIB_NOREF ((uint32_t)0x80000000) /*!< The reference clock is not provided */
+
+/******************************************************************************/
+/* */
+/* Nested Vectored Interrupt Controller */
+/* */
+/******************************************************************************/
+
+/****************** Bit definition for NVIC_ISER register *******************/
+#define NVIC_ISER_SETENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt set enable bits */
+#define NVIC_ISER_SETENA_0 ((uint32_t)0x00000001) /*!< bit 0 */
+#define NVIC_ISER_SETENA_1 ((uint32_t)0x00000002) /*!< bit 1 */
+#define NVIC_ISER_SETENA_2 ((uint32_t)0x00000004) /*!< bit 2 */
+#define NVIC_ISER_SETENA_3 ((uint32_t)0x00000008) /*!< bit 3 */
+#define NVIC_ISER_SETENA_4 ((uint32_t)0x00000010) /*!< bit 4 */
+#define NVIC_ISER_SETENA_5 ((uint32_t)0x00000020) /*!< bit 5 */
+#define NVIC_ISER_SETENA_6 ((uint32_t)0x00000040) /*!< bit 6 */
+#define NVIC_ISER_SETENA_7 ((uint32_t)0x00000080) /*!< bit 7 */
+#define NVIC_ISER_SETENA_8 ((uint32_t)0x00000100) /*!< bit 8 */
+#define NVIC_ISER_SETENA_9 ((uint32_t)0x00000200) /*!< bit 9 */
+#define NVIC_ISER_SETENA_10 ((uint32_t)0x00000400) /*!< bit 10 */
+#define NVIC_ISER_SETENA_11 ((uint32_t)0x00000800) /*!< bit 11 */
+#define NVIC_ISER_SETENA_12 ((uint32_t)0x00001000) /*!< bit 12 */
+#define NVIC_ISER_SETENA_13 ((uint32_t)0x00002000) /*!< bit 13 */
+#define NVIC_ISER_SETENA_14 ((uint32_t)0x00004000) /*!< bit 14 */
+#define NVIC_ISER_SETENA_15 ((uint32_t)0x00008000) /*!< bit 15 */
+#define NVIC_ISER_SETENA_16 ((uint32_t)0x00010000) /*!< bit 16 */
+#define NVIC_ISER_SETENA_17 ((uint32_t)0x00020000) /*!< bit 17 */
+#define NVIC_ISER_SETENA_18 ((uint32_t)0x00040000) /*!< bit 18 */
+#define NVIC_ISER_SETENA_19 ((uint32_t)0x00080000) /*!< bit 19 */
+#define NVIC_ISER_SETENA_20 ((uint32_t)0x00100000) /*!< bit 20 */
+#define NVIC_ISER_SETENA_21 ((uint32_t)0x00200000) /*!< bit 21 */
+#define NVIC_ISER_SETENA_22 ((uint32_t)0x00400000) /*!< bit 22 */
+#define NVIC_ISER_SETENA_23 ((uint32_t)0x00800000) /*!< bit 23 */
+#define NVIC_ISER_SETENA_24 ((uint32_t)0x01000000) /*!< bit 24 */
+#define NVIC_ISER_SETENA_25 ((uint32_t)0x02000000) /*!< bit 25 */
+#define NVIC_ISER_SETENA_26 ((uint32_t)0x04000000) /*!< bit 26 */
+#define NVIC_ISER_SETENA_27 ((uint32_t)0x08000000) /*!< bit 27 */
+#define NVIC_ISER_SETENA_28 ((uint32_t)0x10000000) /*!< bit 28 */
+#define NVIC_ISER_SETENA_29 ((uint32_t)0x20000000) /*!< bit 29 */
+#define NVIC_ISER_SETENA_30 ((uint32_t)0x40000000) /*!< bit 30 */
+#define NVIC_ISER_SETENA_31 ((uint32_t)0x80000000) /*!< bit 31 */
+
+/****************** Bit definition for NVIC_ICER register *******************/
+#define NVIC_ICER_CLRENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-enable bits */
+#define NVIC_ICER_CLRENA_0 ((uint32_t)0x00000001) /*!< bit 0 */
+#define NVIC_ICER_CLRENA_1 ((uint32_t)0x00000002) /*!< bit 1 */
+#define NVIC_ICER_CLRENA_2 ((uint32_t)0x00000004) /*!< bit 2 */
+#define NVIC_ICER_CLRENA_3 ((uint32_t)0x00000008) /*!< bit 3 */
+#define NVIC_ICER_CLRENA_4 ((uint32_t)0x00000010) /*!< bit 4 */
+#define NVIC_ICER_CLRENA_5 ((uint32_t)0x00000020) /*!< bit 5 */
+#define NVIC_ICER_CLRENA_6 ((uint32_t)0x00000040) /*!< bit 6 */
+#define NVIC_ICER_CLRENA_7 ((uint32_t)0x00000080) /*!< bit 7 */
+#define NVIC_ICER_CLRENA_8 ((uint32_t)0x00000100) /*!< bit 8 */
+#define NVIC_ICER_CLRENA_9 ((uint32_t)0x00000200) /*!< bit 9 */
+#define NVIC_ICER_CLRENA_10 ((uint32_t)0x00000400) /*!< bit 10 */
+#define NVIC_ICER_CLRENA_11 ((uint32_t)0x00000800) /*!< bit 11 */
+#define NVIC_ICER_CLRENA_12 ((uint32_t)0x00001000) /*!< bit 12 */
+#define NVIC_ICER_CLRENA_13 ((uint32_t)0x00002000) /*!< bit 13 */
+#define NVIC_ICER_CLRENA_14 ((uint32_t)0x00004000) /*!< bit 14 */
+#define NVIC_ICER_CLRENA_15 ((uint32_t)0x00008000) /*!< bit 15 */
+#define NVIC_ICER_CLRENA_16 ((uint32_t)0x00010000) /*!< bit 16 */
+#define NVIC_ICER_CLRENA_17 ((uint32_t)0x00020000) /*!< bit 17 */
+#define NVIC_ICER_CLRENA_18 ((uint32_t)0x00040000) /*!< bit 18 */
+#define NVIC_ICER_CLRENA_19 ((uint32_t)0x00080000) /*!< bit 19 */
+#define NVIC_ICER_CLRENA_20 ((uint32_t)0x00100000) /*!< bit 20 */
+#define NVIC_ICER_CLRENA_21 ((uint32_t)0x00200000) /*!< bit 21 */
+#define NVIC_ICER_CLRENA_22 ((uint32_t)0x00400000) /*!< bit 22 */
+#define NVIC_ICER_CLRENA_23 ((uint32_t)0x00800000) /*!< bit 23 */
+#define NVIC_ICER_CLRENA_24 ((uint32_t)0x01000000) /*!< bit 24 */
+#define NVIC_ICER_CLRENA_25 ((uint32_t)0x02000000) /*!< bit 25 */
+#define NVIC_ICER_CLRENA_26 ((uint32_t)0x04000000) /*!< bit 26 */
+#define NVIC_ICER_CLRENA_27 ((uint32_t)0x08000000) /*!< bit 27 */
+#define NVIC_ICER_CLRENA_28 ((uint32_t)0x10000000) /*!< bit 28 */
+#define NVIC_ICER_CLRENA_29 ((uint32_t)0x20000000) /*!< bit 29 */
+#define NVIC_ICER_CLRENA_30 ((uint32_t)0x40000000) /*!< bit 30 */
+#define NVIC_ICER_CLRENA_31 ((uint32_t)0x80000000) /*!< bit 31 */
+
+/****************** Bit definition for NVIC_ISPR register *******************/
+#define NVIC_ISPR_SETPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt set-pending bits */
+#define NVIC_ISPR_SETPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */
+#define NVIC_ISPR_SETPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */
+#define NVIC_ISPR_SETPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */
+#define NVIC_ISPR_SETPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */
+#define NVIC_ISPR_SETPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */
+#define NVIC_ISPR_SETPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */
+#define NVIC_ISPR_SETPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */
+#define NVIC_ISPR_SETPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */
+#define NVIC_ISPR_SETPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */
+#define NVIC_ISPR_SETPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */
+#define NVIC_ISPR_SETPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */
+#define NVIC_ISPR_SETPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */
+#define NVIC_ISPR_SETPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */
+#define NVIC_ISPR_SETPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */
+#define NVIC_ISPR_SETPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */
+#define NVIC_ISPR_SETPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */
+#define NVIC_ISPR_SETPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */
+#define NVIC_ISPR_SETPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */
+#define NVIC_ISPR_SETPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */
+#define NVIC_ISPR_SETPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */
+#define NVIC_ISPR_SETPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */
+#define NVIC_ISPR_SETPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */
+#define NVIC_ISPR_SETPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */
+#define NVIC_ISPR_SETPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */
+#define NVIC_ISPR_SETPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */
+#define NVIC_ISPR_SETPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */
+#define NVIC_ISPR_SETPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */
+#define NVIC_ISPR_SETPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */
+#define NVIC_ISPR_SETPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */
+#define NVIC_ISPR_SETPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */
+#define NVIC_ISPR_SETPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */
+#define NVIC_ISPR_SETPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */
+
+/****************** Bit definition for NVIC_ICPR register *******************/
+#define NVIC_ICPR_CLRPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-pending bits */
+#define NVIC_ICPR_CLRPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */
+#define NVIC_ICPR_CLRPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */
+#define NVIC_ICPR_CLRPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */
+#define NVIC_ICPR_CLRPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */
+#define NVIC_ICPR_CLRPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */
+#define NVIC_ICPR_CLRPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */
+#define NVIC_ICPR_CLRPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */
+#define NVIC_ICPR_CLRPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */
+#define NVIC_ICPR_CLRPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */
+#define NVIC_ICPR_CLRPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */
+#define NVIC_ICPR_CLRPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */
+#define NVIC_ICPR_CLRPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */
+#define NVIC_ICPR_CLRPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */
+#define NVIC_ICPR_CLRPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */
+#define NVIC_ICPR_CLRPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */
+#define NVIC_ICPR_CLRPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */
+#define NVIC_ICPR_CLRPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */
+#define NVIC_ICPR_CLRPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */
+#define NVIC_ICPR_CLRPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */
+#define NVIC_ICPR_CLRPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */
+#define NVIC_ICPR_CLRPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */
+#define NVIC_ICPR_CLRPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */
+#define NVIC_ICPR_CLRPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */
+#define NVIC_ICPR_CLRPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */
+#define NVIC_ICPR_CLRPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */
+#define NVIC_ICPR_CLRPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */
+#define NVIC_ICPR_CLRPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */
+#define NVIC_ICPR_CLRPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */
+#define NVIC_ICPR_CLRPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */
+#define NVIC_ICPR_CLRPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */
+#define NVIC_ICPR_CLRPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */
+#define NVIC_ICPR_CLRPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */
+
+/****************** Bit definition for NVIC_IABR register *******************/
+#define NVIC_IABR_ACTIVE ((uint32_t)0xFFFFFFFF) /*!< Interrupt active flags */
+#define NVIC_IABR_ACTIVE_0 ((uint32_t)0x00000001) /*!< bit 0 */
+#define NVIC_IABR_ACTIVE_1 ((uint32_t)0x00000002) /*!< bit 1 */
+#define NVIC_IABR_ACTIVE_2 ((uint32_t)0x00000004) /*!< bit 2 */
+#define NVIC_IABR_ACTIVE_3 ((uint32_t)0x00000008) /*!< bit 3 */
+#define NVIC_IABR_ACTIVE_4 ((uint32_t)0x00000010) /*!< bit 4 */
+#define NVIC_IABR_ACTIVE_5 ((uint32_t)0x00000020) /*!< bit 5 */
+#define NVIC_IABR_ACTIVE_6 ((uint32_t)0x00000040) /*!< bit 6 */
+#define NVIC_IABR_ACTIVE_7 ((uint32_t)0x00000080) /*!< bit 7 */
+#define NVIC_IABR_ACTIVE_8 ((uint32_t)0x00000100) /*!< bit 8 */
+#define NVIC_IABR_ACTIVE_9 ((uint32_t)0x00000200) /*!< bit 9 */
+#define NVIC_IABR_ACTIVE_10 ((uint32_t)0x00000400) /*!< bit 10 */
+#define NVIC_IABR_ACTIVE_11 ((uint32_t)0x00000800) /*!< bit 11 */
+#define NVIC_IABR_ACTIVE_12 ((uint32_t)0x00001000) /*!< bit 12 */
+#define NVIC_IABR_ACTIVE_13 ((uint32_t)0x00002000) /*!< bit 13 */
+#define NVIC_IABR_ACTIVE_14 ((uint32_t)0x00004000) /*!< bit 14 */
+#define NVIC_IABR_ACTIVE_15 ((uint32_t)0x00008000) /*!< bit 15 */
+#define NVIC_IABR_ACTIVE_16 ((uint32_t)0x00010000) /*!< bit 16 */
+#define NVIC_IABR_ACTIVE_17 ((uint32_t)0x00020000) /*!< bit 17 */
+#define NVIC_IABR_ACTIVE_18 ((uint32_t)0x00040000) /*!< bit 18 */
+#define NVIC_IABR_ACTIVE_19 ((uint32_t)0x00080000) /*!< bit 19 */
+#define NVIC_IABR_ACTIVE_20 ((uint32_t)0x00100000) /*!< bit 20 */
+#define NVIC_IABR_ACTIVE_21 ((uint32_t)0x00200000) /*!< bit 21 */
+#define NVIC_IABR_ACTIVE_22 ((uint32_t)0x00400000) /*!< bit 22 */
+#define NVIC_IABR_ACTIVE_23 ((uint32_t)0x00800000) /*!< bit 23 */
+#define NVIC_IABR_ACTIVE_24 ((uint32_t)0x01000000) /*!< bit 24 */
+#define NVIC_IABR_ACTIVE_25 ((uint32_t)0x02000000) /*!< bit 25 */
+#define NVIC_IABR_ACTIVE_26 ((uint32_t)0x04000000) /*!< bit 26 */
+#define NVIC_IABR_ACTIVE_27 ((uint32_t)0x08000000) /*!< bit 27 */
+#define NVIC_IABR_ACTIVE_28 ((uint32_t)0x10000000) /*!< bit 28 */
+#define NVIC_IABR_ACTIVE_29 ((uint32_t)0x20000000) /*!< bit 29 */
+#define NVIC_IABR_ACTIVE_30 ((uint32_t)0x40000000) /*!< bit 30 */
+#define NVIC_IABR_ACTIVE_31 ((uint32_t)0x80000000) /*!< bit 31 */
+
+/****************** Bit definition for NVIC_PRI0 register *******************/
+#define NVIC_IPR0_PRI_0 ((uint32_t)0x000000FF) /*!< Priority of interrupt 0 */
+#define NVIC_IPR0_PRI_1 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 1 */
+#define NVIC_IPR0_PRI_2 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 2 */
+#define NVIC_IPR0_PRI_3 ((uint32_t)0xFF000000) /*!< Priority of interrupt 3 */
+
+/****************** Bit definition for NVIC_PRI1 register *******************/
+#define NVIC_IPR1_PRI_4 ((uint32_t)0x000000FF) /*!< Priority of interrupt 4 */
+#define NVIC_IPR1_PRI_5 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 5 */
+#define NVIC_IPR1_PRI_6 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 6 */
+#define NVIC_IPR1_PRI_7 ((uint32_t)0xFF000000) /*!< Priority of interrupt 7 */
+
+/****************** Bit definition for NVIC_PRI2 register *******************/
+#define NVIC_IPR2_PRI_8 ((uint32_t)0x000000FF) /*!< Priority of interrupt 8 */
+#define NVIC_IPR2_PRI_9 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 9 */
+#define NVIC_IPR2_PRI_10 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 10 */
+#define NVIC_IPR2_PRI_11 ((uint32_t)0xFF000000) /*!< Priority of interrupt 11 */
+
+/****************** Bit definition for NVIC_PRI3 register *******************/
+#define NVIC_IPR3_PRI_12 ((uint32_t)0x000000FF) /*!< Priority of interrupt 12 */
+#define NVIC_IPR3_PRI_13 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 13 */
+#define NVIC_IPR3_PRI_14 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 14 */
+#define NVIC_IPR3_PRI_15 ((uint32_t)0xFF000000) /*!< Priority of interrupt 15 */
+
+/****************** Bit definition for NVIC_PRI4 register *******************/
+#define NVIC_IPR4_PRI_16 ((uint32_t)0x000000FF) /*!< Priority of interrupt 16 */
+#define NVIC_IPR4_PRI_17 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 17 */
+#define NVIC_IPR4_PRI_18 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 18 */
+#define NVIC_IPR4_PRI_19 ((uint32_t)0xFF000000) /*!< Priority of interrupt 19 */
+
+/****************** Bit definition for NVIC_PRI5 register *******************/
+#define NVIC_IPR5_PRI_20 ((uint32_t)0x000000FF) /*!< Priority of interrupt 20 */
+#define NVIC_IPR5_PRI_21 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 21 */
+#define NVIC_IPR5_PRI_22 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 22 */
+#define NVIC_IPR5_PRI_23 ((uint32_t)0xFF000000) /*!< Priority of interrupt 23 */
+
+/****************** Bit definition for NVIC_PRI6 register *******************/
+#define NVIC_IPR6_PRI_24 ((uint32_t)0x000000FF) /*!< Priority of interrupt 24 */
+#define NVIC_IPR6_PRI_25 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 25 */
+#define NVIC_IPR6_PRI_26 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 26 */
+#define NVIC_IPR6_PRI_27 ((uint32_t)0xFF000000) /*!< Priority of interrupt 27 */
+
+/****************** Bit definition for NVIC_PRI7 register *******************/
+#define NVIC_IPR7_PRI_28 ((uint32_t)0x000000FF) /*!< Priority of interrupt 28 */
+#define NVIC_IPR7_PRI_29 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 29 */
+#define NVIC_IPR7_PRI_30 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 30 */
+#define NVIC_IPR7_PRI_31 ((uint32_t)0xFF000000) /*!< Priority of interrupt 31 */
+
+/****************** Bit definition for SCB_CPUID register *******************/
+#define SCB_CPUID_REVISION ((uint32_t)0x0000000F) /*!< Implementation defined revision number */
+#define SCB_CPUID_PARTNO ((uint32_t)0x0000FFF0) /*!< Number of processor within family */
+#define SCB_CPUID_Constant ((uint32_t)0x000F0000) /*!< Reads as 0x0F */
+#define SCB_CPUID_VARIANT ((uint32_t)0x00F00000) /*!< Implementation defined variant number */
+#define SCB_CPUID_IMPLEMENTER ((uint32_t)0xFF000000) /*!< Implementer code. ARM is 0x41 */
+
+/******************* Bit definition for SCB_ICSR register *******************/
+#define SCB_ICSR_VECTACTIVE ((uint32_t)0x000001FF) /*!< Active ISR number field */
+#define SCB_ICSR_RETTOBASE ((uint32_t)0x00000800) /*!< All active exceptions minus the IPSR_current_exception yields the empty set */
+#define SCB_ICSR_VECTPENDING ((uint32_t)0x003FF000) /*!< Pending ISR number field */
+#define SCB_ICSR_ISRPENDING ((uint32_t)0x00400000) /*!< Interrupt pending flag */
+#define SCB_ICSR_ISRPREEMPT ((uint32_t)0x00800000) /*!< It indicates that a pending interrupt becomes active in the next running cycle */
+#define SCB_ICSR_PENDSTCLR ((uint32_t)0x02000000) /*!< Clear pending SysTick bit */
+#define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) /*!< Set pending SysTick bit */
+#define SCB_ICSR_PENDSVCLR ((uint32_t)0x08000000) /*!< Clear pending pendSV bit */
+#define SCB_ICSR_PENDSVSET ((uint32_t)0x10000000) /*!< Set pending pendSV bit */
+#define SCB_ICSR_NMIPENDSET ((uint32_t)0x80000000) /*!< Set pending NMI bit */
+
+/******************* Bit definition for SCB_VTOR register *******************/
+#define SCB_VTOR_TBLOFF ((uint32_t)0x1FFFFF80) /*!< Vector table base offset field */
+#define SCB_VTOR_TBLBASE ((uint32_t)0x20000000) /*!< Table base in code(0) or RAM(1) */
+
+/*!<***************** Bit definition for SCB_AIRCR register *******************/
+#define SCB_AIRCR_VECTRESET ((uint32_t)0x00000001) /*!< System Reset bit */
+#define SCB_AIRCR_VECTCLRACTIVE ((uint32_t)0x00000002) /*!< Clear active vector bit */
+#define SCB_AIRCR_SYSRESETREQ ((uint32_t)0x00000004) /*!< Requests chip control logic to generate a reset */
+
+#define SCB_AIRCR_PRIGROUP ((uint32_t)0x00000700) /*!< PRIGROUP[2:0] bits (Priority group) */
+#define SCB_AIRCR_PRIGROUP_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SCB_AIRCR_PRIGROUP_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SCB_AIRCR_PRIGROUP_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+/* prority group configuration */
+#define SCB_AIRCR_PRIGROUP0 ((uint32_t)0x00000000) /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */
+#define SCB_AIRCR_PRIGROUP1 ((uint32_t)0x00000100) /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */
+#define SCB_AIRCR_PRIGROUP2 ((uint32_t)0x00000200) /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */
+#define SCB_AIRCR_PRIGROUP3 ((uint32_t)0x00000300) /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */
+#define SCB_AIRCR_PRIGROUP4 ((uint32_t)0x00000400) /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */
+#define SCB_AIRCR_PRIGROUP5 ((uint32_t)0x00000500) /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */
+#define SCB_AIRCR_PRIGROUP6 ((uint32_t)0x00000600) /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */
+#define SCB_AIRCR_PRIGROUP7 ((uint32_t)0x00000700) /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */
+
+#define SCB_AIRCR_ENDIANESS ((uint32_t)0x00008000) /*!< Data endianness bit */
+#define SCB_AIRCR_VECTKEY ((uint32_t)0xFFFF0000) /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */
+
+/******************* Bit definition for SCB_SCR register ********************/
+#define SCB_SCR_SLEEPONEXIT ((uint8_t)0x02) /*!< Sleep on exit bit */
+#define SCB_SCR_SLEEPDEEP ((uint8_t)0x04) /*!< Sleep deep bit */
+#define SCB_SCR_SEVONPEND ((uint8_t)0x10) /*!< Wake up from WFE */
+
+/******************** Bit definition for SCB_CCR register *******************/
+#define SCB_CCR_NONBASETHRDENA ((uint16_t)0x0001) /*!< Thread mode can be entered from any level in Handler mode by controlled return value */
+#define SCB_CCR_USERSETMPEND ((uint16_t)0x0002) /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */
+#define SCB_CCR_UNALIGN_TRP ((uint16_t)0x0008) /*!< Trap for unaligned access */
+#define SCB_CCR_DIV_0_TRP ((uint16_t)0x0010) /*!< Trap on Divide by 0 */
+#define SCB_CCR_BFHFNMIGN ((uint16_t)0x0100) /*!< Handlers running at priority -1 and -2 */
+#define SCB_CCR_STKALIGN ((uint16_t)0x0200) /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */
+
+/******************* Bit definition for SCB_SHPR register ********************/
+#define SCB_SHPR_PRI_N ((uint32_t)0x000000FF) /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */
+#define SCB_SHPR_PRI_N1 ((uint32_t)0x0000FF00) /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */
+#define SCB_SHPR_PRI_N2 ((uint32_t)0x00FF0000) /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */
+#define SCB_SHPR_PRI_N3 ((uint32_t)0xFF000000) /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */
+
+/****************** Bit definition for SCB_SHCSR register *******************/
+#define SCB_SHCSR_MEMFAULTACT ((uint32_t)0x00000001) /*!< MemManage is active */
+#define SCB_SHCSR_BUSFAULTACT ((uint32_t)0x00000002) /*!< BusFault is active */
+#define SCB_SHCSR_USGFAULTACT ((uint32_t)0x00000008) /*!< UsageFault is active */
+#define SCB_SHCSR_SVCALLACT ((uint32_t)0x00000080) /*!< SVCall is active */
+#define SCB_SHCSR_MONITORACT ((uint32_t)0x00000100) /*!< Monitor is active */
+#define SCB_SHCSR_PENDSVACT ((uint32_t)0x00000400) /*!< PendSV is active */
+#define SCB_SHCSR_SYSTICKACT ((uint32_t)0x00000800) /*!< SysTick is active */
+#define SCB_SHCSR_USGFAULTPENDED ((uint32_t)0x00001000) /*!< Usage Fault is pended */
+#define SCB_SHCSR_MEMFAULTPENDED ((uint32_t)0x00002000) /*!< MemManage is pended */
+#define SCB_SHCSR_BUSFAULTPENDED ((uint32_t)0x00004000) /*!< Bus Fault is pended */
+#define SCB_SHCSR_SVCALLPENDED ((uint32_t)0x00008000) /*!< SVCall is pended */
+#define SCB_SHCSR_MEMFAULTENA ((uint32_t)0x00010000) /*!< MemManage enable */
+#define SCB_SHCSR_BUSFAULTENA ((uint32_t)0x00020000) /*!< Bus Fault enable */
+#define SCB_SHCSR_USGFAULTENA ((uint32_t)0x00040000) /*!< UsageFault enable */
+
+/******************* Bit definition for SCB_CFSR register *******************/
+/*!< MFSR */
+#define SCB_CFSR_IACCVIOL ((uint32_t)0x00000001) /*!< Instruction access violation */
+#define SCB_CFSR_DACCVIOL ((uint32_t)0x00000002) /*!< Data access violation */
+#define SCB_CFSR_MUNSTKERR ((uint32_t)0x00000008) /*!< Unstacking error */
+#define SCB_CFSR_MSTKERR ((uint32_t)0x00000010) /*!< Stacking error */
+#define SCB_CFSR_MMARVALID ((uint32_t)0x00000080) /*!< Memory Manage Address Register address valid flag */
+/*!< BFSR */
+#define SCB_CFSR_IBUSERR ((uint32_t)0x00000100) /*!< Instruction bus error flag */
+#define SCB_CFSR_PRECISERR ((uint32_t)0x00000200) /*!< Precise data bus error */
+#define SCB_CFSR_IMPRECISERR ((uint32_t)0x00000400) /*!< Imprecise data bus error */
+#define SCB_CFSR_UNSTKERR ((uint32_t)0x00000800) /*!< Unstacking error */
+#define SCB_CFSR_STKERR ((uint32_t)0x00001000) /*!< Stacking error */
+#define SCB_CFSR_BFARVALID ((uint32_t)0x00008000) /*!< Bus Fault Address Register address valid flag */
+/*!< UFSR */
+#define SCB_CFSR_UNDEFINSTR ((uint32_t)0x00010000) /*!< The processor attempt to execute an undefined instruction */
+#define SCB_CFSR_INVSTATE ((uint32_t)0x00020000) /*!< Invalid combination of EPSR and instruction */
+#define SCB_CFSR_INVPC ((uint32_t)0x00040000) /*!< Attempt to load EXC_RETURN into pc illegally */
+#define SCB_CFSR_NOCP ((uint32_t)0x00080000) /*!< Attempt to use a coprocessor instruction */
+#define SCB_CFSR_UNALIGNED ((uint32_t)0x01000000) /*!< Fault occurs when there is an attempt to make an unaligned memory access */
+#define SCB_CFSR_DIVBYZERO ((uint32_t)0x02000000) /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */
+
+/******************* Bit definition for SCB_HFSR register *******************/
+#define SCB_HFSR_VECTTBL ((uint32_t)0x00000002) /*!< Fault occurs because of vector table read on exception processing */
+#define SCB_HFSR_FORCED ((uint32_t)0x40000000) /*!< Hard Fault activated when a configurable Fault was received and cannot activate */
+#define SCB_HFSR_DEBUGEVT ((uint32_t)0x80000000) /*!< Fault related to debug */
+
+/******************* Bit definition for SCB_DFSR register *******************/
+#define SCB_DFSR_HALTED ((uint8_t)0x01) /*!< Halt request flag */
+#define SCB_DFSR_BKPT ((uint8_t)0x02) /*!< BKPT flag */
+#define SCB_DFSR_DWTTRAP ((uint8_t)0x04) /*!< Data Watchpoint and Trace (DWT) flag */
+#define SCB_DFSR_VCATCH ((uint8_t)0x08) /*!< Vector catch flag */
+#define SCB_DFSR_EXTERNAL ((uint8_t)0x10) /*!< External debug request flag */
+
+/******************* Bit definition for SCB_MMFAR register ******************/
+#define SCB_MMFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Mem Manage fault address field */
+
+/******************* Bit definition for SCB_BFAR register *******************/
+#define SCB_BFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Bus fault address field */
+
+/******************* Bit definition for SCB_afsr register *******************/
+#define SCB_AFSR_IMPDEF ((uint32_t)0xFFFFFFFF) /*!< Implementation defined */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+
+/******************* Bit definition for EXTI_EMR register *******************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+
+/****************** Bit definition for EXTI_RTSR register *******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/****************** Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/****************** Bit definition for EXTI_SWIER register ******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/******************* Bit definition for EXTI_PR register ********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */
+#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */
+
+/******************************************************************************/
+/* */
+/* DMA Controller */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */
+#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */
+#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */
+#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */
+#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */
+#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */
+#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */
+#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */
+#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */
+#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */
+#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */
+#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */
+#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */
+#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */
+#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR1 register *******************/
+#define DMA_CCR1_EN ((uint16_t)0x0001) /*!< Channel enable*/
+#define DMA_CCR1_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR1_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR1_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */
+#define DMA_CCR1_DIR ((uint16_t)0x0010) /*!< Data transfer direction */
+#define DMA_CCR1_CIRC ((uint16_t)0x0020) /*!< Circular mode */
+#define DMA_CCR1_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */
+#define DMA_CCR1_MINC ((uint16_t)0x0080) /*!< Memory increment mode */
+
+#define DMA_CCR1_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR1_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */
+#define DMA_CCR1_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */
+
+#define DMA_CCR1_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR1_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define DMA_CCR1_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */
+
+#define DMA_CCR1_PL ((uint16_t)0x3000) /*!< PL[1:0] bits(Channel Priority level) */
+#define DMA_CCR1_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define DMA_CCR1_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define DMA_CCR1_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */
+
+/******************* Bit definition for DMA_CCR2 register *******************/
+#define DMA_CCR2_EN ((uint16_t)0x0001) /*!< Channel enable */
+#define DMA_CCR2_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR2_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR2_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */
+#define DMA_CCR2_DIR ((uint16_t)0x0010) /*!< Data transfer direction */
+#define DMA_CCR2_CIRC ((uint16_t)0x0020) /*!< Circular mode */
+#define DMA_CCR2_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */
+#define DMA_CCR2_MINC ((uint16_t)0x0080) /*!< Memory increment mode */
+
+#define DMA_CCR2_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR2_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */
+#define DMA_CCR2_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */
+
+#define DMA_CCR2_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR2_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define DMA_CCR2_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */
+
+#define DMA_CCR2_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */
+#define DMA_CCR2_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define DMA_CCR2_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define DMA_CCR2_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */
+
+/******************* Bit definition for DMA_CCR3 register *******************/
+#define DMA_CCR3_EN ((uint16_t)0x0001) /*!< Channel enable */
+#define DMA_CCR3_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR3_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR3_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */
+#define DMA_CCR3_DIR ((uint16_t)0x0010) /*!< Data transfer direction */
+#define DMA_CCR3_CIRC ((uint16_t)0x0020) /*!< Circular mode */
+#define DMA_CCR3_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */
+#define DMA_CCR3_MINC ((uint16_t)0x0080) /*!< Memory increment mode */
+
+#define DMA_CCR3_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR3_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */
+#define DMA_CCR3_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */
+
+#define DMA_CCR3_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR3_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define DMA_CCR3_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */
+
+#define DMA_CCR3_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */
+#define DMA_CCR3_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define DMA_CCR3_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define DMA_CCR3_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */
+
+/*!<****************** Bit definition for DMA_CCR4 register *******************/
+#define DMA_CCR4_EN ((uint16_t)0x0001) /*!< Channel enable */
+#define DMA_CCR4_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR4_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR4_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */
+#define DMA_CCR4_DIR ((uint16_t)0x0010) /*!< Data transfer direction */
+#define DMA_CCR4_CIRC ((uint16_t)0x0020) /*!< Circular mode */
+#define DMA_CCR4_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */
+#define DMA_CCR4_MINC ((uint16_t)0x0080) /*!< Memory increment mode */
+
+#define DMA_CCR4_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR4_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */
+#define DMA_CCR4_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */
+
+#define DMA_CCR4_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR4_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define DMA_CCR4_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */
+
+#define DMA_CCR4_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */
+#define DMA_CCR4_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define DMA_CCR4_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define DMA_CCR4_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CCR5 register *******************/
+#define DMA_CCR5_EN ((uint16_t)0x0001) /*!< Channel enable */
+#define DMA_CCR5_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR5_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR5_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */
+#define DMA_CCR5_DIR ((uint16_t)0x0010) /*!< Data transfer direction */
+#define DMA_CCR5_CIRC ((uint16_t)0x0020) /*!< Circular mode */
+#define DMA_CCR5_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */
+#define DMA_CCR5_MINC ((uint16_t)0x0080) /*!< Memory increment mode */
+
+#define DMA_CCR5_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR5_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */
+#define DMA_CCR5_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */
+
+#define DMA_CCR5_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR5_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define DMA_CCR5_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */
+
+#define DMA_CCR5_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */
+#define DMA_CCR5_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define DMA_CCR5_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define DMA_CCR5_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode enable */
+
+/******************* Bit definition for DMA_CCR6 register *******************/
+#define DMA_CCR6_EN ((uint16_t)0x0001) /*!< Channel enable */
+#define DMA_CCR6_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR6_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR6_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */
+#define DMA_CCR6_DIR ((uint16_t)0x0010) /*!< Data transfer direction */
+#define DMA_CCR6_CIRC ((uint16_t)0x0020) /*!< Circular mode */
+#define DMA_CCR6_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */
+#define DMA_CCR6_MINC ((uint16_t)0x0080) /*!< Memory increment mode */
+
+#define DMA_CCR6_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR6_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */
+#define DMA_CCR6_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */
+
+#define DMA_CCR6_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR6_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define DMA_CCR6_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */
+
+#define DMA_CCR6_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */
+#define DMA_CCR6_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define DMA_CCR6_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define DMA_CCR6_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */
+
+/******************* Bit definition for DMA_CCR7 register *******************/
+#define DMA_CCR7_EN ((uint16_t)0x0001) /*!< Channel enable */
+#define DMA_CCR7_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR7_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR7_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */
+#define DMA_CCR7_DIR ((uint16_t)0x0010) /*!< Data transfer direction */
+#define DMA_CCR7_CIRC ((uint16_t)0x0020) /*!< Circular mode */
+#define DMA_CCR7_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */
+#define DMA_CCR7_MINC ((uint16_t)0x0080) /*!< Memory increment mode */
+
+#define DMA_CCR7_PSIZE , ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR7_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */
+#define DMA_CCR7_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */
+
+#define DMA_CCR7_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR7_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define DMA_CCR7_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */
+
+#define DMA_CCR7_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */
+#define DMA_CCR7_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define DMA_CCR7_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define DMA_CCR7_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode enable */
+
+/****************** Bit definition for DMA_CNDTR1 register ******************/
+#define DMA_CNDTR1_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CNDTR2 register ******************/
+#define DMA_CNDTR2_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CNDTR3 register ******************/
+#define DMA_CNDTR3_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CNDTR4 register ******************/
+#define DMA_CNDTR4_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CNDTR5 register ******************/
+#define DMA_CNDTR5_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CNDTR6 register ******************/
+#define DMA_CNDTR6_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CNDTR7 register ******************/
+#define DMA_CNDTR7_NDT ((uint16_t)0xFFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR1 register *******************/
+#define DMA_CPAR1_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CPAR2 register *******************/
+#define DMA_CPAR2_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CPAR3 register *******************/
+#define DMA_CPAR3_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+
+/****************** Bit definition for DMA_CPAR4 register *******************/
+#define DMA_CPAR4_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CPAR5 register *******************/
+#define DMA_CPAR5_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CPAR6 register *******************/
+#define DMA_CPAR6_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+
+/****************** Bit definition for DMA_CPAR7 register *******************/
+#define DMA_CPAR7_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR1 register *******************/
+#define DMA_CMAR1_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/****************** Bit definition for DMA_CMAR2 register *******************/
+#define DMA_CMAR2_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/****************** Bit definition for DMA_CMAR3 register *******************/
+#define DMA_CMAR3_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+
+/****************** Bit definition for DMA_CMAR4 register *******************/
+#define DMA_CMAR4_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/****************** Bit definition for DMA_CMAR5 register *******************/
+#define DMA_CMAR5_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/****************** Bit definition for DMA_CMAR6 register *******************/
+#define DMA_CMAR6_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/****************** Bit definition for DMA_CMAR7 register *******************/
+#define DMA_CMAR7_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD ((uint8_t)0x01) /*!< Analog watchdog flag */
+#define ADC_SR_EOC ((uint8_t)0x02) /*!< End of conversion */
+#define ADC_SR_JEOC ((uint8_t)0x04) /*!< Injected channel end of conversion */
+#define ADC_SR_JSTRT ((uint8_t)0x08) /*!< Injected channel Start flag */
+#define ADC_SR_STRT ((uint8_t)0x10) /*!< Regular channel Start flag */
+
+/******************* Bit definition for ADC_CR1 register ********************/
+#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+
+#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!< Interrupt enable for EOC */
+#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!< Analog Watchdog interrupt enable */
+#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!< Interrupt enable for injected channels */
+#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!< Scan mode */
+#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!< Enable the watchdog on a single channel in scan mode */
+#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!< Automatic injected group conversion */
+#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!< Discontinuous mode on regular channels */
+#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!< Discontinuous mode on injected channels */
+
+#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!< DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!< Bit 0 */
+#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!< Bit 1 */
+#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!< Bit 2 */
+
+#define ADC_CR1_DUALMOD ((uint32_t)0x000F0000) /*!< DUALMOD[3:0] bits (Dual mode selection) */
+#define ADC_CR1_DUALMOD_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define ADC_CR1_DUALMOD_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define ADC_CR1_DUALMOD_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define ADC_CR1_DUALMOD_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+
+#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!< Analog watchdog enable on injected channels */
+#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+
+
+/******************* Bit definition for ADC_CR2 register ********************/
+#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!< A/D Converter ON / OFF */
+#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!< Continuous Conversion */
+#define ADC_CR2_CAL ((uint32_t)0x00000004) /*!< A/D Calibration */
+#define ADC_CR2_RSTCAL ((uint32_t)0x00000008) /*!< Reset Calibration */
+#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!< Direct Memory access mode */
+#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!< Data Alignment */
+
+#define ADC_CR2_JEXTSEL ((uint32_t)0x00007000) /*!< JEXTSEL[2:0] bits (External event select for injected group) */
+#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00004000) /*!< Bit 2 */
+
+#define ADC_CR2_JEXTTRIG ((uint32_t)0x00008000) /*!< External Trigger Conversion mode for injected channels */
+
+#define ADC_CR2_EXTSEL ((uint32_t)0x000E0000) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CR2_EXTSEL_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define ADC_CR2_EXTSEL_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define ADC_CR2_EXTSEL_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+
+#define ADC_CR2_EXTTRIG ((uint32_t)0x00100000) /*!< External Trigger Conversion mode for regular channels */
+#define ADC_CR2_JSWSTART ((uint32_t)0x00200000) /*!< Start Conversion of injected channels */
+#define ADC_CR2_SWSTART ((uint32_t)0x00400000) /*!< Start Conversion of regular channels */
+#define ADC_CR2_TSVREFE ((uint32_t)0x00800000) /*!< Temperature Sensor and VREFINT Enable */
+
+/****************** Bit definition for ADC_SMPR1 register *******************/
+#define ADC_SMPR1_SMP10 ((uint32_t)0x00000007) /*!< SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define ADC_SMPR1_SMP10_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR1_SMP10_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR1_SMP10_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP11 ((uint32_t)0x00000038) /*!< SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define ADC_SMPR1_SMP11_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_SMPR1_SMP11_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_SMPR1_SMP11_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP12 ((uint32_t)0x000001C0) /*!< SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define ADC_SMPR1_SMP12_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_SMPR1_SMP12_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_SMPR1_SMP12_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP13 ((uint32_t)0x00000E00) /*!< SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define ADC_SMPR1_SMP13_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define ADC_SMPR1_SMP13_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define ADC_SMPR1_SMP13_2 ((uint32_t)0x00000800) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP14 ((uint32_t)0x00007000) /*!< SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define ADC_SMPR1_SMP14_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define ADC_SMPR1_SMP14_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define ADC_SMPR1_SMP14_2 ((uint32_t)0x00004000) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP15 ((uint32_t)0x00038000) /*!< SMP15[2:0] bits (Channel 15 Sample time selection) */
+#define ADC_SMPR1_SMP15_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_SMPR1_SMP15_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_SMPR1_SMP15_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP16 ((uint32_t)0x001C0000) /*!< SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define ADC_SMPR1_SMP16_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define ADC_SMPR1_SMP16_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define ADC_SMPR1_SMP16_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP17 ((uint32_t)0x00E00000) /*!< SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define ADC_SMPR1_SMP17_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define ADC_SMPR1_SMP17_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define ADC_SMPR1_SMP17_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+
+/****************** Bit definition for ADC_SMPR2 register *******************/
+#define ADC_SMPR2_SMP0 ((uint32_t)0x00000007) /*!< SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define ADC_SMPR2_SMP0_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR2_SMP0_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR2_SMP0_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP1 ((uint32_t)0x00000038) /*!< SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define ADC_SMPR2_SMP1_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_SMPR2_SMP1_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_SMPR2_SMP1_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP2 ((uint32_t)0x000001C0) /*!< SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define ADC_SMPR2_SMP2_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_SMPR2_SMP2_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_SMPR2_SMP2_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP3 ((uint32_t)0x00000E00) /*!< SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define ADC_SMPR2_SMP3_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define ADC_SMPR2_SMP3_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define ADC_SMPR2_SMP3_2 ((uint32_t)0x00000800) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP4 ((uint32_t)0x00007000) /*!< SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define ADC_SMPR2_SMP4_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define ADC_SMPR2_SMP4_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define ADC_SMPR2_SMP4_2 ((uint32_t)0x00004000) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP5 ((uint32_t)0x00038000) /*!< SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define ADC_SMPR2_SMP5_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_SMPR2_SMP5_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_SMPR2_SMP5_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP6 ((uint32_t)0x001C0000) /*!< SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define ADC_SMPR2_SMP6_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define ADC_SMPR2_SMP6_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define ADC_SMPR2_SMP6_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP7 ((uint32_t)0x00E00000) /*!< SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define ADC_SMPR2_SMP7_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define ADC_SMPR2_SMP7_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define ADC_SMPR2_SMP7_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP8 ((uint32_t)0x07000000) /*!< SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define ADC_SMPR2_SMP8_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define ADC_SMPR2_SMP8_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define ADC_SMPR2_SMP8_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+
+#define ADC_SMPR2_SMP9 ((uint32_t)0x38000000) /*!< SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define ADC_SMPR2_SMP9_0 ((uint32_t)0x08000000) /*!< Bit 0 */
+#define ADC_SMPR2_SMP9_1 ((uint32_t)0x10000000) /*!< Bit 1 */
+#define ADC_SMPR2_SMP9_2 ((uint32_t)0x20000000) /*!< Bit 2 */
+
+/****************** Bit definition for ADC_JOFR1 register *******************/
+#define ADC_JOFR1_JOFFSET1 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 1 */
+
+/****************** Bit definition for ADC_JOFR2 register *******************/
+#define ADC_JOFR2_JOFFSET2 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 2 */
+
+/****************** Bit definition for ADC_JOFR3 register *******************/
+#define ADC_JOFR3_JOFFSET3 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 3 */
+
+/****************** Bit definition for ADC_JOFR4 register *******************/
+#define ADC_JOFR4_JOFFSET4 ((uint16_t)0x0FFF) /*!< Data offset for injected channel 4 */
+
+/******************* Bit definition for ADC_HTR register ********************/
+#define ADC_HTR_HT ((uint16_t)0x0FFF) /*!< Analog watchdog high threshold */
+
+/******************* Bit definition for ADC_LTR register ********************/
+#define ADC_LTR_LT ((uint16_t)0x0FFF) /*!< Analog watchdog low threshold */
+
+/******************* Bit definition for ADC_SQR1 register *******************/
+#define ADC_SQR1_SQ13 ((uint32_t)0x0000001F) /*!< SQ13[4:0] bits (13th conversion in regular sequence) */
+#define ADC_SQR1_SQ13_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SQR1_SQ13_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SQR1_SQ13_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define ADC_SQR1_SQ13_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define ADC_SQR1_SQ13_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+
+#define ADC_SQR1_SQ14 ((uint32_t)0x000003E0) /*!< SQ14[4:0] bits (14th conversion in regular sequence) */
+#define ADC_SQR1_SQ14_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define ADC_SQR1_SQ14_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define ADC_SQR1_SQ14_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+#define ADC_SQR1_SQ14_3 ((uint32_t)0x00000100) /*!< Bit 3 */
+#define ADC_SQR1_SQ14_4 ((uint32_t)0x00000200) /*!< Bit 4 */
+
+#define ADC_SQR1_SQ15 ((uint32_t)0x00007C00) /*!< SQ15[4:0] bits (15th conversion in regular sequence) */
+#define ADC_SQR1_SQ15_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_SQR1_SQ15_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_SQR1_SQ15_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define ADC_SQR1_SQ15_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define ADC_SQR1_SQ15_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define ADC_SQR1_SQ16 ((uint32_t)0x000F8000) /*!< SQ16[4:0] bits (16th conversion in regular sequence) */
+#define ADC_SQR1_SQ16_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_SQR1_SQ16_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_SQR1_SQ16_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+#define ADC_SQR1_SQ16_3 ((uint32_t)0x00040000) /*!< Bit 3 */
+#define ADC_SQR1_SQ16_4 ((uint32_t)0x00080000) /*!< Bit 4 */
+
+#define ADC_SQR1_L ((uint32_t)0x00F00000) /*!< L[3:0] bits (Regular channel sequence length) */
+#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+/******************* Bit definition for ADC_SQR2 register *******************/
+#define ADC_SQR2_SQ7 ((uint32_t)0x0000001F) /*!< SQ7[4:0] bits (7th conversion in regular sequence) */
+#define ADC_SQR2_SQ7_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SQR2_SQ7_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SQR2_SQ7_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define ADC_SQR2_SQ7_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define ADC_SQR2_SQ7_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+
+#define ADC_SQR2_SQ8 ((uint32_t)0x000003E0) /*!< SQ8[4:0] bits (8th conversion in regular sequence) */
+#define ADC_SQR2_SQ8_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define ADC_SQR2_SQ8_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define ADC_SQR2_SQ8_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+#define ADC_SQR2_SQ8_3 ((uint32_t)0x00000100) /*!< Bit 3 */
+#define ADC_SQR2_SQ8_4 ((uint32_t)0x00000200) /*!< Bit 4 */
+
+#define ADC_SQR2_SQ9 ((uint32_t)0x00007C00) /*!< SQ9[4:0] bits (9th conversion in regular sequence) */
+#define ADC_SQR2_SQ9_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_SQR2_SQ9_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_SQR2_SQ9_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define ADC_SQR2_SQ9_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define ADC_SQR2_SQ9_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define ADC_SQR2_SQ10 ((uint32_t)0x000F8000) /*!< SQ10[4:0] bits (10th conversion in regular sequence) */
+#define ADC_SQR2_SQ10_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_SQR2_SQ10_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_SQR2_SQ10_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+#define ADC_SQR2_SQ10_3 ((uint32_t)0x00040000) /*!< Bit 3 */
+#define ADC_SQR2_SQ10_4 ((uint32_t)0x00080000) /*!< Bit 4 */
+
+#define ADC_SQR2_SQ11 ((uint32_t)0x01F00000) /*!< SQ11[4:0] bits (11th conversion in regular sequence) */
+#define ADC_SQR2_SQ11_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define ADC_SQR2_SQ11_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define ADC_SQR2_SQ11_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define ADC_SQR2_SQ11_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+#define ADC_SQR2_SQ11_4 ((uint32_t)0x01000000) /*!< Bit 4 */
+
+#define ADC_SQR2_SQ12 ((uint32_t)0x3E000000) /*!< SQ12[4:0] bits (12th conversion in regular sequence) */
+#define ADC_SQR2_SQ12_0 ((uint32_t)0x02000000) /*!< Bit 0 */
+#define ADC_SQR2_SQ12_1 ((uint32_t)0x04000000) /*!< Bit 1 */
+#define ADC_SQR2_SQ12_2 ((uint32_t)0x08000000) /*!< Bit 2 */
+#define ADC_SQR2_SQ12_3 ((uint32_t)0x10000000) /*!< Bit 3 */
+#define ADC_SQR2_SQ12_4 ((uint32_t)0x20000000) /*!< Bit 4 */
+
+/******************* Bit definition for ADC_SQR3 register *******************/
+#define ADC_SQR3_SQ1 ((uint32_t)0x0000001F) /*!< SQ1[4:0] bits (1st conversion in regular sequence) */
+#define ADC_SQR3_SQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SQR3_SQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SQR3_SQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define ADC_SQR3_SQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define ADC_SQR3_SQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+
+#define ADC_SQR3_SQ2 ((uint32_t)0x000003E0) /*!< SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define ADC_SQR3_SQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define ADC_SQR3_SQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define ADC_SQR3_SQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+#define ADC_SQR3_SQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */
+#define ADC_SQR3_SQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */
+
+#define ADC_SQR3_SQ3 ((uint32_t)0x00007C00) /*!< SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define ADC_SQR3_SQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_SQR3_SQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_SQR3_SQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define ADC_SQR3_SQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define ADC_SQR3_SQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define ADC_SQR3_SQ4 ((uint32_t)0x000F8000) /*!< SQ4[4:0] bits (4th conversion in regular sequence) */
+#define ADC_SQR3_SQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_SQR3_SQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_SQR3_SQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+#define ADC_SQR3_SQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */
+#define ADC_SQR3_SQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */
+
+#define ADC_SQR3_SQ5 ((uint32_t)0x01F00000) /*!< SQ5[4:0] bits (5th conversion in regular sequence) */
+#define ADC_SQR3_SQ5_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define ADC_SQR3_SQ5_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define ADC_SQR3_SQ5_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define ADC_SQR3_SQ5_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+#define ADC_SQR3_SQ5_4 ((uint32_t)0x01000000) /*!< Bit 4 */
+
+#define ADC_SQR3_SQ6 ((uint32_t)0x3E000000) /*!< SQ6[4:0] bits (6th conversion in regular sequence) */
+#define ADC_SQR3_SQ6_0 ((uint32_t)0x02000000) /*!< Bit 0 */
+#define ADC_SQR3_SQ6_1 ((uint32_t)0x04000000) /*!< Bit 1 */
+#define ADC_SQR3_SQ6_2 ((uint32_t)0x08000000) /*!< Bit 2 */
+#define ADC_SQR3_SQ6_3 ((uint32_t)0x10000000) /*!< Bit 3 */
+#define ADC_SQR3_SQ6_4 ((uint32_t)0x20000000) /*!< Bit 4 */
+
+/******************* Bit definition for ADC_JSQR register *******************/
+#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */
+#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+
+#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!< JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */
+#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */
+
+#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!< JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!< JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */
+#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */
+
+#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!< JL[1:0] bits (Injected Sequence length) */
+#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+
+/******************* Bit definition for ADC_JDR1 register *******************/
+#define ADC_JDR1_JDATA ((uint16_t)0xFFFF) /*!< Injected data */
+
+/******************* Bit definition for ADC_JDR2 register *******************/
+#define ADC_JDR2_JDATA ((uint16_t)0xFFFF) /*!< Injected data */
+
+/******************* Bit definition for ADC_JDR3 register *******************/
+#define ADC_JDR3_JDATA ((uint16_t)0xFFFF) /*!< Injected data */
+
+/******************* Bit definition for ADC_JDR4 register *******************/
+#define ADC_JDR4_JDATA ((uint16_t)0xFFFF) /*!< Injected data */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+#define ADC_DR_ADC2DATA ((uint32_t)0xFFFF0000) /*!< ADC2 data */
+
+/******************************************************************************/
+/* */
+/* Digital to Analog Converter */
+/* */
+/******************************************************************************/
+
+/******************** Bit definition for DAC_CR register ********************/
+#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */
+#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */
+#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */
+
+#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+
+#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */
+#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!< DAC channel2 enable */
+#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!< DAC channel2 output buffer disable */
+#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!< DAC channel2 Trigger enable */
+
+#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!< Bit 0 */
+#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!< Bit 1 */
+#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!< Bit 2 */
+
+#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!< Bit 0 */
+#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!< Bit 1 */
+
+#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!< DAC channel2 DMA enabled */
+
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1 ((uint8_t)0x01) /*!< DAC channel1 software trigger */
+#define DAC_SWTRIGR_SWTRIG2 ((uint8_t)0x02) /*!< DAC channel2 software trigger */
+
+/***************** Bit definition for DAC_DHR12R1 register ******************/
+#define DAC_DHR12R1_DACC1DHR ((uint16_t)0x0FFF) /*!< DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L1 register ******************/
+#define DAC_DHR12L1_DACC1DHR ((uint16_t)0xFFF0) /*!< DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R1 register ******************/
+#define DAC_DHR8R1_DACC1DHR ((uint8_t)0xFF) /*!< DAC channel1 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12R2 register ******************/
+#define DAC_DHR12R2_DACC2DHR ((uint16_t)0x0FFF) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L2 register ******************/
+#define DAC_DHR12L2_DACC2DHR ((uint16_t)0xFFF0) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R2 register ******************/
+#define DAC_DHR8R2_DACC2DHR ((uint8_t)0xFF) /*!< DAC channel2 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12RD register ******************/
+#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12LD register ******************/
+#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8RD register ******************/
+#define DAC_DHR8RD_DACC1DHR ((uint16_t)0x00FF) /*!< DAC channel1 8-bit Right aligned data */
+#define DAC_DHR8RD_DACC2DHR ((uint16_t)0xFF00) /*!< DAC channel2 8-bit Right aligned data */
+
+/******************* Bit definition for DAC_DOR1 register *******************/
+#define DAC_DOR1_DACC1DOR ((uint16_t)0x0FFF) /*!< DAC channel1 data output */
+
+/******************* Bit definition for DAC_DOR2 register *******************/
+#define DAC_DOR2_DACC2DOR ((uint16_t)0x0FFF) /*!< DAC channel2 data output */
+
+/******************** Bit definition for DAC_SR register ********************/
+#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */
+#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun flag */
+
+/******************************************************************************/
+/* */
+/* CEC */
+/* */
+/******************************************************************************/
+/******************** Bit definition for CEC_CFGR register ******************/
+#define CEC_CFGR_PE ((uint16_t)0x0001) /*!< Peripheral Enable */
+#define CEC_CFGR_IE ((uint16_t)0x0002) /*!< Interrupt Enable */
+#define CEC_CFGR_BTEM ((uint16_t)0x0004) /*!< Bit Timing Error Mode */
+#define CEC_CFGR_BPEM ((uint16_t)0x0008) /*!< Bit Period Error Mode */
+
+/******************** Bit definition for CEC_OAR register ******************/
+#define CEC_OAR_OA ((uint16_t)0x000F) /*!< OA[3:0]: Own Address */
+#define CEC_OAR_OA_0 ((uint16_t)0x0001) /*!< Bit 0 */
+#define CEC_OAR_OA_1 ((uint16_t)0x0002) /*!< Bit 1 */
+#define CEC_OAR_OA_2 ((uint16_t)0x0004) /*!< Bit 2 */
+#define CEC_OAR_OA_3 ((uint16_t)0x0008) /*!< Bit 3 */
+
+/******************** Bit definition for CEC_PRES register ******************/
+#define CEC_PRES_PRES ((uint16_t)0x3FFF) /*!< Prescaler Counter Value */
+
+/******************** Bit definition for CEC_ESR register ******************/
+#define CEC_ESR_BTE ((uint16_t)0x0001) /*!< Bit Timing Error */
+#define CEC_ESR_BPE ((uint16_t)0x0002) /*!< Bit Period Error */
+#define CEC_ESR_RBTFE ((uint16_t)0x0004) /*!< Rx Block Transfer Finished Error */
+#define CEC_ESR_SBE ((uint16_t)0x0008) /*!< Start Bit Error */
+#define CEC_ESR_ACKE ((uint16_t)0x0010) /*!< Block Acknowledge Error */
+#define CEC_ESR_LINE ((uint16_t)0x0020) /*!< Line Error */
+#define CEC_ESR_TBTFE ((uint16_t)0x0040) /*!< Tx Block Transfer Finished Error */
+
+/******************** Bit definition for CEC_CSR register ******************/
+#define CEC_CSR_TSOM ((uint16_t)0x0001) /*!< Tx Start Of Message */
+#define CEC_CSR_TEOM ((uint16_t)0x0002) /*!< Tx End Of Message */
+#define CEC_CSR_TERR ((uint16_t)0x0004) /*!< Tx Error */
+#define CEC_CSR_TBTRF ((uint16_t)0x0008) /*!< Tx Byte Transfer Request or Block Transfer Finished */
+#define CEC_CSR_RSOM ((uint16_t)0x0010) /*!< Rx Start Of Message */
+#define CEC_CSR_REOM ((uint16_t)0x0020) /*!< Rx End Of Message */
+#define CEC_CSR_RERR ((uint16_t)0x0040) /*!< Rx Error */
+#define CEC_CSR_RBTF ((uint16_t)0x0080) /*!< Rx Block Transfer Finished */
+
+/******************** Bit definition for CEC_TXD register ******************/
+#define CEC_TXD_TXD ((uint16_t)0x00FF) /*!< Tx Data register */
+
+/******************** Bit definition for CEC_RXD register ******************/
+#define CEC_RXD_RXD ((uint16_t)0x00FF) /*!< Rx Data register */
+
+/******************************************************************************/
+/* */
+/* TIM */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for TIM_CR1 register ********************/
+#define TIM_CR1_CEN ((uint16_t)0x0001) /*!< Counter enable */
+#define TIM_CR1_UDIS ((uint16_t)0x0002) /*!< Update disable */
+#define TIM_CR1_URS ((uint16_t)0x0004) /*!< Update request source */
+#define TIM_CR1_OPM ((uint16_t)0x0008) /*!< One pulse mode */
+#define TIM_CR1_DIR ((uint16_t)0x0010) /*!< Direction */
+
+#define TIM_CR1_CMS ((uint16_t)0x0060) /*!< CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint16_t)0x0020) /*!< Bit 0 */
+#define TIM_CR1_CMS_1 ((uint16_t)0x0040) /*!< Bit 1 */
+
+#define TIM_CR1_ARPE ((uint16_t)0x0080) /*!< Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint16_t)0x0300) /*!< CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint16_t)0x0100) /*!< Bit 0 */
+#define TIM_CR1_CKD_1 ((uint16_t)0x0200) /*!< Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register ********************/
+#define TIM_CR2_CCPC ((uint16_t)0x0001) /*!< Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint16_t)0x0004) /*!< Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint16_t)0x0008) /*!< Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint16_t)0x0070) /*!< MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define TIM_CR2_MMS_1 ((uint16_t)0x0020) /*!< Bit 1 */
+#define TIM_CR2_MMS_2 ((uint16_t)0x0040) /*!< Bit 2 */
+
+#define TIM_CR2_TI1S ((uint16_t)0x0080) /*!< TI1 Selection */
+#define TIM_CR2_OIS1 ((uint16_t)0x0100) /*!< Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint16_t)0x0200) /*!< Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint16_t)0x0400) /*!< Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint16_t)0x0800) /*!< Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint16_t)0x1000) /*!< Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint16_t)0x2000) /*!< Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint16_t)0x4000) /*!< Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register *******************/
+#define TIM_SMCR_SMS ((uint16_t)0x0007) /*!< SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint16_t)0x0001) /*!< Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint16_t)0x0002) /*!< Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint16_t)0x0004) /*!< Bit 2 */
+
+#define TIM_SMCR_TS ((uint16_t)0x0070) /*!< TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define TIM_SMCR_TS_1 ((uint16_t)0x0020) /*!< Bit 1 */
+#define TIM_SMCR_TS_2 ((uint16_t)0x0040) /*!< Bit 2 */
+
+#define TIM_SMCR_MSM ((uint16_t)0x0080) /*!< Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint16_t)0x0F00) /*!< ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint16_t)0x0100) /*!< Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint16_t)0x0200) /*!< Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint16_t)0x0400) /*!< Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint16_t)0x0800) /*!< Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint16_t)0x3000) /*!< ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define TIM_SMCR_ECE ((uint16_t)0x4000) /*!< External clock enable */
+#define TIM_SMCR_ETP ((uint16_t)0x8000) /*!< External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register *******************/
+#define TIM_DIER_UIE ((uint16_t)0x0001) /*!< Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint16_t)0x0002) /*!< Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint16_t)0x0004) /*!< Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint16_t)0x0008) /*!< Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint16_t)0x0010) /*!< Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint16_t)0x0020) /*!< COM interrupt enable */
+#define TIM_DIER_TIE ((uint16_t)0x0040) /*!< Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint16_t)0x0080) /*!< Break interrupt enable */
+#define TIM_DIER_UDE ((uint16_t)0x0100) /*!< Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint16_t)0x0200) /*!< Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint16_t)0x0400) /*!< Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint16_t)0x0800) /*!< Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint16_t)0x1000) /*!< Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint16_t)0x2000) /*!< COM DMA request enable */
+#define TIM_DIER_TDE ((uint16_t)0x4000) /*!< Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register ********************/
+#define TIM_SR_UIF ((uint16_t)0x0001) /*!< Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint16_t)0x0002) /*!< Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint16_t)0x0004) /*!< Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint16_t)0x0008) /*!< Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint16_t)0x0010) /*!< Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint16_t)0x0020) /*!< COM interrupt Flag */
+#define TIM_SR_TIF ((uint16_t)0x0040) /*!< Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint16_t)0x0080) /*!< Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint16_t)0x0200) /*!< Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint16_t)0x0400) /*!< Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint16_t)0x0800) /*!< Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint16_t)0x1000) /*!< Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register ********************/
+#define TIM_EGR_UG ((uint8_t)0x01) /*!< Update Generation */
+#define TIM_EGR_CC1G ((uint8_t)0x02) /*!< Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint8_t)0x04) /*!< Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint8_t)0x08) /*!< Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint8_t)0x10) /*!< Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint8_t)0x20) /*!< Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint8_t)0x40) /*!< Trigger Generation */
+#define TIM_EGR_BG ((uint8_t)0x80) /*!< Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register *******************/
+#define TIM_CCMR1_CC1S ((uint16_t)0x0003) /*!< CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint16_t)0x0001) /*!< Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint16_t)0x0002) /*!< Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint16_t)0x0004) /*!< Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint16_t)0x0008) /*!< Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint16_t)0x0070) /*!< OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint16_t)0x0020) /*!< Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint16_t)0x0040) /*!< Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint16_t)0x0080) /*!< Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint16_t)0x0300) /*!< CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint16_t)0x0100) /*!< Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint16_t)0x0200) /*!< Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint16_t)0x0400) /*!< Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint16_t)0x0800) /*!< Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint16_t)0x7000) /*!< OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint16_t)0x2000) /*!< Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint16_t)0x4000) /*!< Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint16_t)0x8000) /*!< Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint16_t)0x000C) /*!< IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint16_t)0x0004) /*!< Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint16_t)0x0008) /*!< Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint16_t)0x00F0) /*!< IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint16_t)0x0020) /*!< Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint16_t)0x0040) /*!< Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint16_t)0x0080) /*!< Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint16_t)0x0C00) /*!< IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint16_t)0x0800) /*!< Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint16_t)0xF000) /*!< IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint16_t)0x2000) /*!< Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint16_t)0x4000) /*!< Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint16_t)0x8000) /*!< Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register *******************/
+#define TIM_CCMR2_CC3S ((uint16_t)0x0003) /*!< CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint16_t)0x0001) /*!< Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint16_t)0x0002) /*!< Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint16_t)0x0004) /*!< Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint16_t)0x0008) /*!< Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint16_t)0x0070) /*!< OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint16_t)0x0020) /*!< Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint16_t)0x0040) /*!< Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint16_t)0x0080) /*!< Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint16_t)0x0300) /*!< CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint16_t)0x0100) /*!< Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint16_t)0x0200) /*!< Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint16_t)0x0400) /*!< Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint16_t)0x0800) /*!< Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint16_t)0x7000) /*!< OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint16_t)0x2000) /*!< Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint16_t)0x4000) /*!< Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint16_t)0x8000) /*!< Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint16_t)0x000C) /*!< IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint16_t)0x0004) /*!< Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint16_t)0x0008) /*!< Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint16_t)0x00F0) /*!< IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint16_t)0x0020) /*!< Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint16_t)0x0040) /*!< Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint16_t)0x0080) /*!< Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint16_t)0x0C00) /*!< IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint16_t)0x0800) /*!< Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint16_t)0xF000) /*!< IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint16_t)0x2000) /*!< Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint16_t)0x4000) /*!< Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint16_t)0x8000) /*!< Bit 3 */
+
+/******************* Bit definition for TIM_CCER register *******************/
+#define TIM_CCER_CC1E ((uint16_t)0x0001) /*!< Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint16_t)0x0002) /*!< Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint16_t)0x0004) /*!< Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint16_t)0x0008) /*!< Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint16_t)0x0010) /*!< Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint16_t)0x0020) /*!< Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint16_t)0x0040) /*!< Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint16_t)0x0080) /*!< Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint16_t)0x0100) /*!< Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint16_t)0x0200) /*!< Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint16_t)0x0400) /*!< Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint16_t)0x0800) /*!< Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint16_t)0x1000) /*!< Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint16_t)0x2000) /*!< Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint16_t)0x8000) /*!< Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register ********************/
+#define TIM_CNT_CNT ((uint16_t)0xFFFF) /*!< Counter Value */
+
+/******************* Bit definition for TIM_PSC register ********************/
+#define TIM_PSC_PSC ((uint16_t)0xFFFF) /*!< Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register ********************/
+#define TIM_ARR_ARR ((uint16_t)0xFFFF) /*!< actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register ********************/
+#define TIM_RCR_REP ((uint8_t)0xFF) /*!< Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register *******************/
+#define TIM_CCR1_CCR1 ((uint16_t)0xFFFF) /*!< Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register *******************/
+#define TIM_CCR2_CCR2 ((uint16_t)0xFFFF) /*!< Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register *******************/
+#define TIM_CCR3_CCR3 ((uint16_t)0xFFFF) /*!< Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register *******************/
+#define TIM_CCR4_CCR4 ((uint16_t)0xFFFF) /*!< Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register *******************/
+#define TIM_BDTR_DTG ((uint16_t)0x00FF) /*!< DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint16_t)0x0001) /*!< Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint16_t)0x0002) /*!< Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint16_t)0x0004) /*!< Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint16_t)0x0008) /*!< Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint16_t)0x0010) /*!< Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint16_t)0x0020) /*!< Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint16_t)0x0040) /*!< Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint16_t)0x0080) /*!< Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint16_t)0x0300) /*!< LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint16_t)0x0100) /*!< Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint16_t)0x0200) /*!< Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint16_t)0x0400) /*!< Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint16_t)0x0800) /*!< Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint16_t)0x1000) /*!< Break enable */
+#define TIM_BDTR_BKP ((uint16_t)0x2000) /*!< Break Polarity */
+#define TIM_BDTR_AOE ((uint16_t)0x4000) /*!< Automatic Output enable */
+#define TIM_BDTR_MOE ((uint16_t)0x8000) /*!< Main Output enable */
+
+/******************* Bit definition for TIM_DCR register ********************/
+#define TIM_DCR_DBA ((uint16_t)0x001F) /*!< DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint16_t)0x0001) /*!< Bit 0 */
+#define TIM_DCR_DBA_1 ((uint16_t)0x0002) /*!< Bit 1 */
+#define TIM_DCR_DBA_2 ((uint16_t)0x0004) /*!< Bit 2 */
+#define TIM_DCR_DBA_3 ((uint16_t)0x0008) /*!< Bit 3 */
+#define TIM_DCR_DBA_4 ((uint16_t)0x0010) /*!< Bit 4 */
+
+#define TIM_DCR_DBL ((uint16_t)0x1F00) /*!< DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint16_t)0x0100) /*!< Bit 0 */
+#define TIM_DCR_DBL_1 ((uint16_t)0x0200) /*!< Bit 1 */
+#define TIM_DCR_DBL_2 ((uint16_t)0x0400) /*!< Bit 2 */
+#define TIM_DCR_DBL_3 ((uint16_t)0x0800) /*!< Bit 3 */
+#define TIM_DCR_DBL_4 ((uint16_t)0x1000) /*!< Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register *******************/
+#define TIM_DMAR_DMAB ((uint16_t)0xFFFF) /*!< DMA register for burst accesses */
+
+/******************************************************************************/
+/* */
+/* Real-Time Clock */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for RTC_CRH register ********************/
+#define RTC_CRH_SECIE ((uint8_t)0x01) /*!< Second Interrupt Enable */
+#define RTC_CRH_ALRIE ((uint8_t)0x02) /*!< Alarm Interrupt Enable */
+#define RTC_CRH_OWIE ((uint8_t)0x04) /*!< OverfloW Interrupt Enable */
+
+/******************* Bit definition for RTC_CRL register ********************/
+#define RTC_CRL_SECF ((uint8_t)0x01) /*!< Second Flag */
+#define RTC_CRL_ALRF ((uint8_t)0x02) /*!< Alarm Flag */
+#define RTC_CRL_OWF ((uint8_t)0x04) /*!< OverfloW Flag */
+#define RTC_CRL_RSF ((uint8_t)0x08) /*!< Registers Synchronized Flag */
+#define RTC_CRL_CNF ((uint8_t)0x10) /*!< Configuration Flag */
+#define RTC_CRL_RTOFF ((uint8_t)0x20) /*!< RTC operation OFF */
+
+/******************* Bit definition for RTC_PRLH register *******************/
+#define RTC_PRLH_PRL ((uint16_t)0x000F) /*!< RTC Prescaler Reload Value High */
+
+/******************* Bit definition for RTC_PRLL register *******************/
+#define RTC_PRLL_PRL ((uint16_t)0xFFFF) /*!< RTC Prescaler Reload Value Low */
+
+/******************* Bit definition for RTC_DIVH register *******************/
+#define RTC_DIVH_RTC_DIV ((uint16_t)0x000F) /*!< RTC Clock Divider High */
+
+/******************* Bit definition for RTC_DIVL register *******************/
+#define RTC_DIVL_RTC_DIV ((uint16_t)0xFFFF) /*!< RTC Clock Divider Low */
+
+/******************* Bit definition for RTC_CNTH register *******************/
+#define RTC_CNTH_RTC_CNT ((uint16_t)0xFFFF) /*!< RTC Counter High */
+
+/******************* Bit definition for RTC_CNTL register *******************/
+#define RTC_CNTL_RTC_CNT ((uint16_t)0xFFFF) /*!< RTC Counter Low */
+
+/******************* Bit definition for RTC_ALRH register *******************/
+#define RTC_ALRH_RTC_ALR ((uint16_t)0xFFFF) /*!< RTC Alarm High */
+
+/******************* Bit definition for RTC_ALRL register *******************/
+#define RTC_ALRL_RTC_ALR ((uint16_t)0xFFFF) /*!< RTC Alarm Low */
+
+/******************************************************************************/
+/* */
+/* Independent WATCHDOG */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_KR_KEY ((uint16_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register ********************/
+#define IWDG_PR_PR ((uint8_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint8_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint8_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint8_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register *******************/
+#define IWDG_RLR_RL ((uint16_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register ********************/
+#define IWDG_SR_PVU ((uint8_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint8_t)0x02) /*!< Watchdog counter reload value update */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint8_t)0x7F) /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint8_t)0x01) /*!< Bit 0 */
+#define WWDG_CR_T1 ((uint8_t)0x02) /*!< Bit 1 */
+#define WWDG_CR_T2 ((uint8_t)0x04) /*!< Bit 2 */
+#define WWDG_CR_T3 ((uint8_t)0x08) /*!< Bit 3 */
+#define WWDG_CR_T4 ((uint8_t)0x10) /*!< Bit 4 */
+#define WWDG_CR_T5 ((uint8_t)0x20) /*!< Bit 5 */
+#define WWDG_CR_T6 ((uint8_t)0x40) /*!< Bit 6 */
+
+#define WWDG_CR_WDGA ((uint8_t)0x80) /*!< Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint16_t)0x007F) /*!< W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint16_t)0x0001) /*!< Bit 0 */
+#define WWDG_CFR_W1 ((uint16_t)0x0002) /*!< Bit 1 */
+#define WWDG_CFR_W2 ((uint16_t)0x0004) /*!< Bit 2 */
+#define WWDG_CFR_W3 ((uint16_t)0x0008) /*!< Bit 3 */
+#define WWDG_CFR_W4 ((uint16_t)0x0010) /*!< Bit 4 */
+#define WWDG_CFR_W5 ((uint16_t)0x0020) /*!< Bit 5 */
+#define WWDG_CFR_W6 ((uint16_t)0x0040) /*!< Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint16_t)0x0180) /*!< WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint16_t)0x0080) /*!< Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint16_t)0x0100) /*!< Bit 1 */
+
+#define WWDG_CFR_EWI ((uint16_t)0x0200) /*!< Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint8_t)0x01) /*!< Early Wakeup Interrupt Flag */
+
+/******************************************************************************/
+/* */
+/* Flexible Static Memory Controller */
+/* */
+/******************************************************************************/
+
+/****************** Bit definition for FSMC_BCR1 register *******************/
+#define FSMC_BCR1_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */
+#define FSMC_BCR1_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */
+
+#define FSMC_BCR1_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR1_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define FSMC_BCR1_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define FSMC_BCR1_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR1_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BCR1_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+
+#define FSMC_BCR1_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */
+#define FSMC_BCR1_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */
+#define FSMC_BCR1_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */
+#define FSMC_BCR1_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */
+#define FSMC_BCR1_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */
+#define FSMC_BCR1_WREN ((uint32_t)0x00001000) /*!< Write enable bit */
+#define FSMC_BCR1_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */
+#define FSMC_BCR1_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */
+#define FSMC_BCR1_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */
+#define FSMC_BCR1_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */
+
+/****************** Bit definition for FSMC_BCR2 register *******************/
+#define FSMC_BCR2_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */
+#define FSMC_BCR2_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */
+
+#define FSMC_BCR2_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR2_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define FSMC_BCR2_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define FSMC_BCR2_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR2_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BCR2_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+
+#define FSMC_BCR2_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */
+#define FSMC_BCR2_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */
+#define FSMC_BCR2_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */
+#define FSMC_BCR2_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */
+#define FSMC_BCR2_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */
+#define FSMC_BCR2_WREN ((uint32_t)0x00001000) /*!< Write enable bit */
+#define FSMC_BCR2_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */
+#define FSMC_BCR2_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */
+#define FSMC_BCR2_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */
+#define FSMC_BCR2_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */
+
+/****************** Bit definition for FSMC_BCR3 register *******************/
+#define FSMC_BCR3_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */
+#define FSMC_BCR3_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */
+
+#define FSMC_BCR3_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR3_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define FSMC_BCR3_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define FSMC_BCR3_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR3_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BCR3_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+
+#define FSMC_BCR3_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */
+#define FSMC_BCR3_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */
+#define FSMC_BCR3_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit. */
+#define FSMC_BCR3_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */
+#define FSMC_BCR3_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */
+#define FSMC_BCR3_WREN ((uint32_t)0x00001000) /*!< Write enable bit */
+#define FSMC_BCR3_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */
+#define FSMC_BCR3_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */
+#define FSMC_BCR3_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */
+#define FSMC_BCR3_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */
+
+/****************** Bit definition for FSMC_BCR4 register *******************/
+#define FSMC_BCR4_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */
+#define FSMC_BCR4_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */
+
+#define FSMC_BCR4_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR4_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define FSMC_BCR4_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define FSMC_BCR4_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR4_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BCR4_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+
+#define FSMC_BCR4_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */
+#define FSMC_BCR4_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */
+#define FSMC_BCR4_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */
+#define FSMC_BCR4_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */
+#define FSMC_BCR4_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */
+#define FSMC_BCR4_WREN ((uint32_t)0x00001000) /*!< Write enable bit */
+#define FSMC_BCR4_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */
+#define FSMC_BCR4_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */
+#define FSMC_BCR4_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */
+#define FSMC_BCR4_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */
+
+/****************** Bit definition for FSMC_BTR1 register ******************/
+#define FSMC_BTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BTR1_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR1_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define FSMC_BTR1_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define FSMC_BTR1_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define FSMC_BTR1_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+
+#define FSMC_BTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define FSMC_BTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+/****************** Bit definition for FSMC_BTR2 register *******************/
+#define FSMC_BTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BTR2_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR2_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define FSMC_BTR2_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define FSMC_BTR2_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define FSMC_BTR2_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+
+#define FSMC_BTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define FSMC_BTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+/******************* Bit definition for FSMC_BTR3 register *******************/
+#define FSMC_BTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BTR3_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR3_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define FSMC_BTR3_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define FSMC_BTR3_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define FSMC_BTR3_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+
+#define FSMC_BTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define FSMC_BTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+/****************** Bit definition for FSMC_BTR4 register *******************/
+#define FSMC_BTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BTR4_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR4_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define FSMC_BTR4_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define FSMC_BTR4_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define FSMC_BTR4_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+
+#define FSMC_BTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define FSMC_BTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR1 register ******************/
+#define FSMC_BWTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BWTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BWTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BWTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BWTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BWTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BWTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BWTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BWTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BWTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BWTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BWTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BWTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BWTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define FSMC_BWTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BWTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BWTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BWTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BWTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BWTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BWTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BWTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR2 register ******************/
+#define FSMC_BWTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BWTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BWTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BWTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BWTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BWTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BWTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BWTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BWTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BWTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BWTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BWTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BWTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BWTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1*/
+#define FSMC_BWTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BWTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BWTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BWTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BWTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BWTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BWTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BWTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR3 register ******************/
+#define FSMC_BWTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BWTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BWTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BWTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BWTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BWTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BWTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BWTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BWTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BWTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BWTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BWTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BWTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BWTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define FSMC_BWTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BWTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BWTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BWTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BWTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BWTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BWTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BWTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR4 register ******************/
+#define FSMC_BWTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BWTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BWTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BWTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BWTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BWTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BWTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BWTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BWTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BWTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BWTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BWTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BWTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BWTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define FSMC_BWTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BWTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BWTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BWTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BWTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BWTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BWTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BWTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+/****************** Bit definition for FSMC_PCR2 register *******************/
+#define FSMC_PCR2_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */
+#define FSMC_PCR2_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */
+#define FSMC_PCR2_PTYP ((uint32_t)0x00000008) /*!< Memory type */
+
+#define FSMC_PCR2_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */
+#define FSMC_PCR2_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_PCR2_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+
+#define FSMC_PCR2_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */
+
+#define FSMC_PCR2_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */
+#define FSMC_PCR2_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define FSMC_PCR2_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define FSMC_PCR2_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */
+#define FSMC_PCR2_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */
+
+#define FSMC_PCR2_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */
+#define FSMC_PCR2_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */
+#define FSMC_PCR2_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */
+#define FSMC_PCR2_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */
+#define FSMC_PCR2_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */
+
+#define FSMC_PCR2_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[1:0] bits (ECC page size) */
+#define FSMC_PCR2_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define FSMC_PCR2_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define FSMC_PCR2_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+
+/****************** Bit definition for FSMC_PCR3 register *******************/
+#define FSMC_PCR3_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */
+#define FSMC_PCR3_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */
+#define FSMC_PCR3_PTYP ((uint32_t)0x00000008) /*!< Memory type */
+
+#define FSMC_PCR3_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */
+#define FSMC_PCR3_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_PCR3_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+
+#define FSMC_PCR3_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */
+
+#define FSMC_PCR3_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */
+#define FSMC_PCR3_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define FSMC_PCR3_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define FSMC_PCR3_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */
+#define FSMC_PCR3_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */
+
+#define FSMC_PCR3_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */
+#define FSMC_PCR3_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */
+#define FSMC_PCR3_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */
+#define FSMC_PCR3_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */
+#define FSMC_PCR3_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */
+
+#define FSMC_PCR3_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[2:0] bits (ECC page size) */
+#define FSMC_PCR3_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define FSMC_PCR3_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define FSMC_PCR3_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+
+/****************** Bit definition for FSMC_PCR4 register *******************/
+#define FSMC_PCR4_PWAITEN ((uint32_t)0x00000002) /*!< Wait feature enable bit */
+#define FSMC_PCR4_PBKEN ((uint32_t)0x00000004) /*!< PC Card/NAND Flash memory bank enable bit */
+#define FSMC_PCR4_PTYP ((uint32_t)0x00000008) /*!< Memory type */
+
+#define FSMC_PCR4_PWID ((uint32_t)0x00000030) /*!< PWID[1:0] bits (NAND Flash databus width) */
+#define FSMC_PCR4_PWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_PCR4_PWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+
+#define FSMC_PCR4_ECCEN ((uint32_t)0x00000040) /*!< ECC computation logic enable bit */
+
+#define FSMC_PCR4_TCLR ((uint32_t)0x00001E00) /*!< TCLR[3:0] bits (CLE to RE delay) */
+#define FSMC_PCR4_TCLR_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define FSMC_PCR4_TCLR_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define FSMC_PCR4_TCLR_2 ((uint32_t)0x00000800) /*!< Bit 2 */
+#define FSMC_PCR4_TCLR_3 ((uint32_t)0x00001000) /*!< Bit 3 */
+
+#define FSMC_PCR4_TAR ((uint32_t)0x0001E000) /*!< TAR[3:0] bits (ALE to RE delay) */
+#define FSMC_PCR4_TAR_0 ((uint32_t)0x00002000) /*!< Bit 0 */
+#define FSMC_PCR4_TAR_1 ((uint32_t)0x00004000) /*!< Bit 1 */
+#define FSMC_PCR4_TAR_2 ((uint32_t)0x00008000) /*!< Bit 2 */
+#define FSMC_PCR4_TAR_3 ((uint32_t)0x00010000) /*!< Bit 3 */
+
+#define FSMC_PCR4_ECCPS ((uint32_t)0x000E0000) /*!< ECCPS[2:0] bits (ECC page size) */
+#define FSMC_PCR4_ECCPS_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define FSMC_PCR4_ECCPS_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define FSMC_PCR4_ECCPS_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+
+/******************* Bit definition for FSMC_SR2 register *******************/
+#define FSMC_SR2_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */
+#define FSMC_SR2_ILS ((uint8_t)0x02) /*!< Interrupt Level status */
+#define FSMC_SR2_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */
+#define FSMC_SR2_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */
+#define FSMC_SR2_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */
+#define FSMC_SR2_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */
+#define FSMC_SR2_FEMPT ((uint8_t)0x40) /*!< FIFO empty */
+
+/******************* Bit definition for FSMC_SR3 register *******************/
+#define FSMC_SR3_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */
+#define FSMC_SR3_ILS ((uint8_t)0x02) /*!< Interrupt Level status */
+#define FSMC_SR3_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */
+#define FSMC_SR3_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */
+#define FSMC_SR3_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */
+#define FSMC_SR3_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */
+#define FSMC_SR3_FEMPT ((uint8_t)0x40) /*!< FIFO empty */
+
+/******************* Bit definition for FSMC_SR4 register *******************/
+#define FSMC_SR4_IRS ((uint8_t)0x01) /*!< Interrupt Rising Edge status */
+#define FSMC_SR4_ILS ((uint8_t)0x02) /*!< Interrupt Level status */
+#define FSMC_SR4_IFS ((uint8_t)0x04) /*!< Interrupt Falling Edge status */
+#define FSMC_SR4_IREN ((uint8_t)0x08) /*!< Interrupt Rising Edge detection Enable bit */
+#define FSMC_SR4_ILEN ((uint8_t)0x10) /*!< Interrupt Level detection Enable bit */
+#define FSMC_SR4_IFEN ((uint8_t)0x20) /*!< Interrupt Falling Edge detection Enable bit */
+#define FSMC_SR4_FEMPT ((uint8_t)0x40) /*!< FIFO empty */
+
+/****************** Bit definition for FSMC_PMEM2 register ******************/
+#define FSMC_PMEM2_MEMSET2 ((uint32_t)0x000000FF) /*!< MEMSET2[7:0] bits (Common memory 2 setup time) */
+#define FSMC_PMEM2_MEMSET2_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_PMEM2_MEMSET2_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_PMEM2_MEMSET2_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_PMEM2_MEMSET2_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define FSMC_PMEM2_MEMSET2_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define FSMC_PMEM2_MEMSET2_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define FSMC_PMEM2_MEMSET2_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define FSMC_PMEM2_MEMSET2_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+
+#define FSMC_PMEM2_MEMWAIT2 ((uint32_t)0x0000FF00) /*!< MEMWAIT2[7:0] bits (Common memory 2 wait time) */
+#define FSMC_PMEM2_MEMWAIT2_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_PMEM2_MEMWAIT2_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_PMEM2_MEMWAIT2_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_PMEM2_MEMWAIT2_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define FSMC_PMEM2_MEMWAIT2_4 ((uint32_t)0x00001000) /*!< Bit 4 */
+#define FSMC_PMEM2_MEMWAIT2_5 ((uint32_t)0x00002000) /*!< Bit 5 */
+#define FSMC_PMEM2_MEMWAIT2_6 ((uint32_t)0x00004000) /*!< Bit 6 */
+#define FSMC_PMEM2_MEMWAIT2_7 ((uint32_t)0x00008000) /*!< Bit 7 */
+
+#define FSMC_PMEM2_MEMHOLD2 ((uint32_t)0x00FF0000) /*!< MEMHOLD2[7:0] bits (Common memory 2 hold time) */
+#define FSMC_PMEM2_MEMHOLD2_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define FSMC_PMEM2_MEMHOLD2_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define FSMC_PMEM2_MEMHOLD2_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define FSMC_PMEM2_MEMHOLD2_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define FSMC_PMEM2_MEMHOLD2_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define FSMC_PMEM2_MEMHOLD2_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define FSMC_PMEM2_MEMHOLD2_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define FSMC_PMEM2_MEMHOLD2_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+
+#define FSMC_PMEM2_MEMHIZ2 ((uint32_t)0xFF000000) /*!< MEMHIZ2[7:0] bits (Common memory 2 databus HiZ time) */
+#define FSMC_PMEM2_MEMHIZ2_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_PMEM2_MEMHIZ2_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_PMEM2_MEMHIZ2_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_PMEM2_MEMHIZ2_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+#define FSMC_PMEM2_MEMHIZ2_4 ((uint32_t)0x10000000) /*!< Bit 4 */
+#define FSMC_PMEM2_MEMHIZ2_5 ((uint32_t)0x20000000) /*!< Bit 5 */
+#define FSMC_PMEM2_MEMHIZ2_6 ((uint32_t)0x40000000) /*!< Bit 6 */
+#define FSMC_PMEM2_MEMHIZ2_7 ((uint32_t)0x80000000) /*!< Bit 7 */
+
+/****************** Bit definition for FSMC_PMEM3 register ******************/
+#define FSMC_PMEM3_MEMSET3 ((uint32_t)0x000000FF) /*!< MEMSET3[7:0] bits (Common memory 3 setup time) */
+#define FSMC_PMEM3_MEMSET3_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_PMEM3_MEMSET3_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_PMEM3_MEMSET3_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_PMEM3_MEMSET3_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define FSMC_PMEM3_MEMSET3_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define FSMC_PMEM3_MEMSET3_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define FSMC_PMEM3_MEMSET3_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define FSMC_PMEM3_MEMSET3_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+
+#define FSMC_PMEM3_MEMWAIT3 ((uint32_t)0x0000FF00) /*!< MEMWAIT3[7:0] bits (Common memory 3 wait time) */
+#define FSMC_PMEM3_MEMWAIT3_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_PMEM3_MEMWAIT3_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_PMEM3_MEMWAIT3_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_PMEM3_MEMWAIT3_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define FSMC_PMEM3_MEMWAIT3_4 ((uint32_t)0x00001000) /*!< Bit 4 */
+#define FSMC_PMEM3_MEMWAIT3_5 ((uint32_t)0x00002000) /*!< Bit 5 */
+#define FSMC_PMEM3_MEMWAIT3_6 ((uint32_t)0x00004000) /*!< Bit 6 */
+#define FSMC_PMEM3_MEMWAIT3_7 ((uint32_t)0x00008000) /*!< Bit 7 */
+
+#define FSMC_PMEM3_MEMHOLD3 ((uint32_t)0x00FF0000) /*!< MEMHOLD3[7:0] bits (Common memory 3 hold time) */
+#define FSMC_PMEM3_MEMHOLD3_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define FSMC_PMEM3_MEMHOLD3_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define FSMC_PMEM3_MEMHOLD3_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define FSMC_PMEM3_MEMHOLD3_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define FSMC_PMEM3_MEMHOLD3_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define FSMC_PMEM3_MEMHOLD3_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define FSMC_PMEM3_MEMHOLD3_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define FSMC_PMEM3_MEMHOLD3_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+
+#define FSMC_PMEM3_MEMHIZ3 ((uint32_t)0xFF000000) /*!< MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */
+#define FSMC_PMEM3_MEMHIZ3_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_PMEM3_MEMHIZ3_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_PMEM3_MEMHIZ3_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_PMEM3_MEMHIZ3_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+#define FSMC_PMEM3_MEMHIZ3_4 ((uint32_t)0x10000000) /*!< Bit 4 */
+#define FSMC_PMEM3_MEMHIZ3_5 ((uint32_t)0x20000000) /*!< Bit 5 */
+#define FSMC_PMEM3_MEMHIZ3_6 ((uint32_t)0x40000000) /*!< Bit 6 */
+#define FSMC_PMEM3_MEMHIZ3_7 ((uint32_t)0x80000000) /*!< Bit 7 */
+
+/****************** Bit definition for FSMC_PMEM4 register ******************/
+#define FSMC_PMEM4_MEMSET4 ((uint32_t)0x000000FF) /*!< MEMSET4[7:0] bits (Common memory 4 setup time) */
+#define FSMC_PMEM4_MEMSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_PMEM4_MEMSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_PMEM4_MEMSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_PMEM4_MEMSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define FSMC_PMEM4_MEMSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define FSMC_PMEM4_MEMSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define FSMC_PMEM4_MEMSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define FSMC_PMEM4_MEMSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+
+#define FSMC_PMEM4_MEMWAIT4 ((uint32_t)0x0000FF00) /*!< MEMWAIT4[7:0] bits (Common memory 4 wait time) */
+#define FSMC_PMEM4_MEMWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_PMEM4_MEMWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_PMEM4_MEMWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_PMEM4_MEMWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define FSMC_PMEM4_MEMWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */
+#define FSMC_PMEM4_MEMWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */
+#define FSMC_PMEM4_MEMWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */
+#define FSMC_PMEM4_MEMWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */
+
+#define FSMC_PMEM4_MEMHOLD4 ((uint32_t)0x00FF0000) /*!< MEMHOLD4[7:0] bits (Common memory 4 hold time) */
+#define FSMC_PMEM4_MEMHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define FSMC_PMEM4_MEMHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define FSMC_PMEM4_MEMHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define FSMC_PMEM4_MEMHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define FSMC_PMEM4_MEMHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define FSMC_PMEM4_MEMHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define FSMC_PMEM4_MEMHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define FSMC_PMEM4_MEMHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+
+#define FSMC_PMEM4_MEMHIZ4 ((uint32_t)0xFF000000) /*!< MEMHIZ4[7:0] bits (Common memory 4 databus HiZ time) */
+#define FSMC_PMEM4_MEMHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_PMEM4_MEMHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_PMEM4_MEMHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_PMEM4_MEMHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+#define FSMC_PMEM4_MEMHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */
+#define FSMC_PMEM4_MEMHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */
+#define FSMC_PMEM4_MEMHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */
+#define FSMC_PMEM4_MEMHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */
+
+/****************** Bit definition for FSMC_PATT2 register ******************/
+#define FSMC_PATT2_ATTSET2 ((uint32_t)0x000000FF) /*!< ATTSET2[7:0] bits (Attribute memory 2 setup time) */
+#define FSMC_PATT2_ATTSET2_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_PATT2_ATTSET2_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_PATT2_ATTSET2_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_PATT2_ATTSET2_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define FSMC_PATT2_ATTSET2_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define FSMC_PATT2_ATTSET2_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define FSMC_PATT2_ATTSET2_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define FSMC_PATT2_ATTSET2_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+
+#define FSMC_PATT2_ATTWAIT2 ((uint32_t)0x0000FF00) /*!< ATTWAIT2[7:0] bits (Attribute memory 2 wait time) */
+#define FSMC_PATT2_ATTWAIT2_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_PATT2_ATTWAIT2_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_PATT2_ATTWAIT2_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_PATT2_ATTWAIT2_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define FSMC_PATT2_ATTWAIT2_4 ((uint32_t)0x00001000) /*!< Bit 4 */
+#define FSMC_PATT2_ATTWAIT2_5 ((uint32_t)0x00002000) /*!< Bit 5 */
+#define FSMC_PATT2_ATTWAIT2_6 ((uint32_t)0x00004000) /*!< Bit 6 */
+#define FSMC_PATT2_ATTWAIT2_7 ((uint32_t)0x00008000) /*!< Bit 7 */
+
+#define FSMC_PATT2_ATTHOLD2 ((uint32_t)0x00FF0000) /*!< ATTHOLD2[7:0] bits (Attribute memory 2 hold time) */
+#define FSMC_PATT2_ATTHOLD2_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define FSMC_PATT2_ATTHOLD2_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define FSMC_PATT2_ATTHOLD2_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define FSMC_PATT2_ATTHOLD2_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define FSMC_PATT2_ATTHOLD2_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define FSMC_PATT2_ATTHOLD2_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define FSMC_PATT2_ATTHOLD2_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define FSMC_PATT2_ATTHOLD2_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+
+#define FSMC_PATT2_ATTHIZ2 ((uint32_t)0xFF000000) /*!< ATTHIZ2[7:0] bits (Attribute memory 2 databus HiZ time) */
+#define FSMC_PATT2_ATTHIZ2_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_PATT2_ATTHIZ2_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_PATT2_ATTHIZ2_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_PATT2_ATTHIZ2_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+#define FSMC_PATT2_ATTHIZ2_4 ((uint32_t)0x10000000) /*!< Bit 4 */
+#define FSMC_PATT2_ATTHIZ2_5 ((uint32_t)0x20000000) /*!< Bit 5 */
+#define FSMC_PATT2_ATTHIZ2_6 ((uint32_t)0x40000000) /*!< Bit 6 */
+#define FSMC_PATT2_ATTHIZ2_7 ((uint32_t)0x80000000) /*!< Bit 7 */
+
+/****************** Bit definition for FSMC_PATT3 register ******************/
+#define FSMC_PATT3_ATTSET3 ((uint32_t)0x000000FF) /*!< ATTSET3[7:0] bits (Attribute memory 3 setup time) */
+#define FSMC_PATT3_ATTSET3_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_PATT3_ATTSET3_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_PATT3_ATTSET3_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_PATT3_ATTSET3_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define FSMC_PATT3_ATTSET3_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define FSMC_PATT3_ATTSET3_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define FSMC_PATT3_ATTSET3_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define FSMC_PATT3_ATTSET3_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+
+#define FSMC_PATT3_ATTWAIT3 ((uint32_t)0x0000FF00) /*!< ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */
+#define FSMC_PATT3_ATTWAIT3_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_PATT3_ATTWAIT3_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_PATT3_ATTWAIT3_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_PATT3_ATTWAIT3_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define FSMC_PATT3_ATTWAIT3_4 ((uint32_t)0x00001000) /*!< Bit 4 */
+#define FSMC_PATT3_ATTWAIT3_5 ((uint32_t)0x00002000) /*!< Bit 5 */
+#define FSMC_PATT3_ATTWAIT3_6 ((uint32_t)0x00004000) /*!< Bit 6 */
+#define FSMC_PATT3_ATTWAIT3_7 ((uint32_t)0x00008000) /*!< Bit 7 */
+
+#define FSMC_PATT3_ATTHOLD3 ((uint32_t)0x00FF0000) /*!< ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */
+#define FSMC_PATT3_ATTHOLD3_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define FSMC_PATT3_ATTHOLD3_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define FSMC_PATT3_ATTHOLD3_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define FSMC_PATT3_ATTHOLD3_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define FSMC_PATT3_ATTHOLD3_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define FSMC_PATT3_ATTHOLD3_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define FSMC_PATT3_ATTHOLD3_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define FSMC_PATT3_ATTHOLD3_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+
+#define FSMC_PATT3_ATTHIZ3 ((uint32_t)0xFF000000) /*!< ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */
+#define FSMC_PATT3_ATTHIZ3_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_PATT3_ATTHIZ3_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_PATT3_ATTHIZ3_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_PATT3_ATTHIZ3_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+#define FSMC_PATT3_ATTHIZ3_4 ((uint32_t)0x10000000) /*!< Bit 4 */
+#define FSMC_PATT3_ATTHIZ3_5 ((uint32_t)0x20000000) /*!< Bit 5 */
+#define FSMC_PATT3_ATTHIZ3_6 ((uint32_t)0x40000000) /*!< Bit 6 */
+#define FSMC_PATT3_ATTHIZ3_7 ((uint32_t)0x80000000) /*!< Bit 7 */
+
+/****************** Bit definition for FSMC_PATT4 register ******************/
+#define FSMC_PATT4_ATTSET4 ((uint32_t)0x000000FF) /*!< ATTSET4[7:0] bits (Attribute memory 4 setup time) */
+#define FSMC_PATT4_ATTSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_PATT4_ATTSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_PATT4_ATTSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_PATT4_ATTSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define FSMC_PATT4_ATTSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define FSMC_PATT4_ATTSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define FSMC_PATT4_ATTSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define FSMC_PATT4_ATTSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+
+#define FSMC_PATT4_ATTWAIT4 ((uint32_t)0x0000FF00) /*!< ATTWAIT4[7:0] bits (Attribute memory 4 wait time) */
+#define FSMC_PATT4_ATTWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_PATT4_ATTWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_PATT4_ATTWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_PATT4_ATTWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define FSMC_PATT4_ATTWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */
+#define FSMC_PATT4_ATTWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */
+#define FSMC_PATT4_ATTWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */
+#define FSMC_PATT4_ATTWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */
+
+#define FSMC_PATT4_ATTHOLD4 ((uint32_t)0x00FF0000) /*!< ATTHOLD4[7:0] bits (Attribute memory 4 hold time) */
+#define FSMC_PATT4_ATTHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define FSMC_PATT4_ATTHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define FSMC_PATT4_ATTHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define FSMC_PATT4_ATTHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define FSMC_PATT4_ATTHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define FSMC_PATT4_ATTHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define FSMC_PATT4_ATTHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define FSMC_PATT4_ATTHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+
+#define FSMC_PATT4_ATTHIZ4 ((uint32_t)0xFF000000) /*!< ATTHIZ4[7:0] bits (Attribute memory 4 databus HiZ time) */
+#define FSMC_PATT4_ATTHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_PATT4_ATTHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_PATT4_ATTHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_PATT4_ATTHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+#define FSMC_PATT4_ATTHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */
+#define FSMC_PATT4_ATTHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */
+#define FSMC_PATT4_ATTHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */
+#define FSMC_PATT4_ATTHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */
+
+/****************** Bit definition for FSMC_PIO4 register *******************/
+#define FSMC_PIO4_IOSET4 ((uint32_t)0x000000FF) /*!< IOSET4[7:0] bits (I/O 4 setup time) */
+#define FSMC_PIO4_IOSET4_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_PIO4_IOSET4_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_PIO4_IOSET4_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_PIO4_IOSET4_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define FSMC_PIO4_IOSET4_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define FSMC_PIO4_IOSET4_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define FSMC_PIO4_IOSET4_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define FSMC_PIO4_IOSET4_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+
+#define FSMC_PIO4_IOWAIT4 ((uint32_t)0x0000FF00) /*!< IOWAIT4[7:0] bits (I/O 4 wait time) */
+#define FSMC_PIO4_IOWAIT4_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_PIO4_IOWAIT4_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_PIO4_IOWAIT4_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_PIO4_IOWAIT4_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define FSMC_PIO4_IOWAIT4_4 ((uint32_t)0x00001000) /*!< Bit 4 */
+#define FSMC_PIO4_IOWAIT4_5 ((uint32_t)0x00002000) /*!< Bit 5 */
+#define FSMC_PIO4_IOWAIT4_6 ((uint32_t)0x00004000) /*!< Bit 6 */
+#define FSMC_PIO4_IOWAIT4_7 ((uint32_t)0x00008000) /*!< Bit 7 */
+
+#define FSMC_PIO4_IOHOLD4 ((uint32_t)0x00FF0000) /*!< IOHOLD4[7:0] bits (I/O 4 hold time) */
+#define FSMC_PIO4_IOHOLD4_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define FSMC_PIO4_IOHOLD4_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define FSMC_PIO4_IOHOLD4_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define FSMC_PIO4_IOHOLD4_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define FSMC_PIO4_IOHOLD4_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define FSMC_PIO4_IOHOLD4_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define FSMC_PIO4_IOHOLD4_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define FSMC_PIO4_IOHOLD4_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+
+#define FSMC_PIO4_IOHIZ4 ((uint32_t)0xFF000000) /*!< IOHIZ4[7:0] bits (I/O 4 databus HiZ time) */
+#define FSMC_PIO4_IOHIZ4_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_PIO4_IOHIZ4_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_PIO4_IOHIZ4_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_PIO4_IOHIZ4_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+#define FSMC_PIO4_IOHIZ4_4 ((uint32_t)0x10000000) /*!< Bit 4 */
+#define FSMC_PIO4_IOHIZ4_5 ((uint32_t)0x20000000) /*!< Bit 5 */
+#define FSMC_PIO4_IOHIZ4_6 ((uint32_t)0x40000000) /*!< Bit 6 */
+#define FSMC_PIO4_IOHIZ4_7 ((uint32_t)0x80000000) /*!< Bit 7 */
+
+/****************** Bit definition for FSMC_ECCR2 register ******************/
+#define FSMC_ECCR2_ECC2 ((uint32_t)0xFFFFFFFF) /*!< ECC result */
+
+/****************** Bit definition for FSMC_ECCR3 register ******************/
+#define FSMC_ECCR3_ECC3 ((uint32_t)0xFFFFFFFF) /*!< ECC result */
+
+/******************************************************************************/
+/* */
+/* SD host Interface */
+/* */
+/******************************************************************************/
+
+/****************** Bit definition for SDIO_POWER register ******************/
+#define SDIO_POWER_PWRCTRL ((uint8_t)0x03) /*!< PWRCTRL[1:0] bits (Power supply control bits) */
+#define SDIO_POWER_PWRCTRL_0 ((uint8_t)0x01) /*!< Bit 0 */
+#define SDIO_POWER_PWRCTRL_1 ((uint8_t)0x02) /*!< Bit 1 */
+
+/****************** Bit definition for SDIO_CLKCR register ******************/
+#define SDIO_CLKCR_CLKDIV ((uint16_t)0x00FF) /*!< Clock divide factor */
+#define SDIO_CLKCR_CLKEN ((uint16_t)0x0100) /*!< Clock enable bit */
+#define SDIO_CLKCR_PWRSAV ((uint16_t)0x0200) /*!< Power saving configuration bit */
+#define SDIO_CLKCR_BYPASS ((uint16_t)0x0400) /*!< Clock divider bypass enable bit */
+
+#define SDIO_CLKCR_WIDBUS ((uint16_t)0x1800) /*!< WIDBUS[1:0] bits (Wide bus mode enable bit) */
+#define SDIO_CLKCR_WIDBUS_0 ((uint16_t)0x0800) /*!< Bit 0 */
+#define SDIO_CLKCR_WIDBUS_1 ((uint16_t)0x1000) /*!< Bit 1 */
+
+#define SDIO_CLKCR_NEGEDGE ((uint16_t)0x2000) /*!< SDIO_CK dephasing selection bit */
+#define SDIO_CLKCR_HWFC_EN ((uint16_t)0x4000) /*!< HW Flow Control enable */
+
+/******************* Bit definition for SDIO_ARG register *******************/
+#define SDIO_ARG_CMDARG ((uint32_t)0xFFFFFFFF) /*!< Command argument */
+
+/******************* Bit definition for SDIO_CMD register *******************/
+#define SDIO_CMD_CMDINDEX ((uint16_t)0x003F) /*!< Command Index */
+
+#define SDIO_CMD_WAITRESP ((uint16_t)0x00C0) /*!< WAITRESP[1:0] bits (Wait for response bits) */
+#define SDIO_CMD_WAITRESP_0 ((uint16_t)0x0040) /*!< Bit 0 */
+#define SDIO_CMD_WAITRESP_1 ((uint16_t)0x0080) /*!< Bit 1 */
+
+#define SDIO_CMD_WAITINT ((uint16_t)0x0100) /*!< CPSM Waits for Interrupt Request */
+#define SDIO_CMD_WAITPEND ((uint16_t)0x0200) /*!< CPSM Waits for ends of data transfer (CmdPend internal signal) */
+#define SDIO_CMD_CPSMEN ((uint16_t)0x0400) /*!< Command path state machine (CPSM) Enable bit */
+#define SDIO_CMD_SDIOSUSPEND ((uint16_t)0x0800) /*!< SD I/O suspend command */
+#define SDIO_CMD_ENCMDCOMPL ((uint16_t)0x1000) /*!< Enable CMD completion */
+#define SDIO_CMD_NIEN ((uint16_t)0x2000) /*!< Not Interrupt Enable */
+#define SDIO_CMD_CEATACMD ((uint16_t)0x4000) /*!< CE-ATA command */
+
+/***************** Bit definition for SDIO_RESPCMD register *****************/
+#define SDIO_RESPCMD_RESPCMD ((uint8_t)0x3F) /*!< Response command index */
+
+/****************** Bit definition for SDIO_RESP0 register ******************/
+#define SDIO_RESP0_CARDSTATUS0 ((uint32_t)0xFFFFFFFF) /*!< Card Status */
+
+/****************** Bit definition for SDIO_RESP1 register ******************/
+#define SDIO_RESP1_CARDSTATUS1 ((uint32_t)0xFFFFFFFF) /*!< Card Status */
+
+/****************** Bit definition for SDIO_RESP2 register ******************/
+#define SDIO_RESP2_CARDSTATUS2 ((uint32_t)0xFFFFFFFF) /*!< Card Status */
+
+/****************** Bit definition for SDIO_RESP3 register ******************/
+#define SDIO_RESP3_CARDSTATUS3 ((uint32_t)0xFFFFFFFF) /*!< Card Status */
+
+/****************** Bit definition for SDIO_RESP4 register ******************/
+#define SDIO_RESP4_CARDSTATUS4 ((uint32_t)0xFFFFFFFF) /*!< Card Status */
+
+/****************** Bit definition for SDIO_DTIMER register *****************/
+#define SDIO_DTIMER_DATATIME ((uint32_t)0xFFFFFFFF) /*!< Data timeout period. */
+
+/****************** Bit definition for SDIO_DLEN register *******************/
+#define SDIO_DLEN_DATALENGTH ((uint32_t)0x01FFFFFF) /*!< Data length value */
+
+/****************** Bit definition for SDIO_DCTRL register ******************/
+#define SDIO_DCTRL_DTEN ((uint16_t)0x0001) /*!< Data transfer enabled bit */
+#define SDIO_DCTRL_DTDIR ((uint16_t)0x0002) /*!< Data transfer direction selection */
+#define SDIO_DCTRL_DTMODE ((uint16_t)0x0004) /*!< Data transfer mode selection */
+#define SDIO_DCTRL_DMAEN ((uint16_t)0x0008) /*!< DMA enabled bit */
+
+#define SDIO_DCTRL_DBLOCKSIZE ((uint16_t)0x00F0) /*!< DBLOCKSIZE[3:0] bits (Data block size) */
+#define SDIO_DCTRL_DBLOCKSIZE_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define SDIO_DCTRL_DBLOCKSIZE_1 ((uint16_t)0x0020) /*!< Bit 1 */
+#define SDIO_DCTRL_DBLOCKSIZE_2 ((uint16_t)0x0040) /*!< Bit 2 */
+#define SDIO_DCTRL_DBLOCKSIZE_3 ((uint16_t)0x0080) /*!< Bit 3 */
+
+#define SDIO_DCTRL_RWSTART ((uint16_t)0x0100) /*!< Read wait start */
+#define SDIO_DCTRL_RWSTOP ((uint16_t)0x0200) /*!< Read wait stop */
+#define SDIO_DCTRL_RWMOD ((uint16_t)0x0400) /*!< Read wait mode */
+#define SDIO_DCTRL_SDIOEN ((uint16_t)0x0800) /*!< SD I/O enable functions */
+
+/****************** Bit definition for SDIO_DCOUNT register *****************/
+#define SDIO_DCOUNT_DATACOUNT ((uint32_t)0x01FFFFFF) /*!< Data count value */
+
+/****************** Bit definition for SDIO_STA register ********************/
+#define SDIO_STA_CCRCFAIL ((uint32_t)0x00000001) /*!< Command response received (CRC check failed) */
+#define SDIO_STA_DCRCFAIL ((uint32_t)0x00000002) /*!< Data block sent/received (CRC check failed) */
+#define SDIO_STA_CTIMEOUT ((uint32_t)0x00000004) /*!< Command response timeout */
+#define SDIO_STA_DTIMEOUT ((uint32_t)0x00000008) /*!< Data timeout */
+#define SDIO_STA_TXUNDERR ((uint32_t)0x00000010) /*!< Transmit FIFO underrun error */
+#define SDIO_STA_RXOVERR ((uint32_t)0x00000020) /*!< Received FIFO overrun error */
+#define SDIO_STA_CMDREND ((uint32_t)0x00000040) /*!< Command response received (CRC check passed) */
+#define SDIO_STA_CMDSENT ((uint32_t)0x00000080) /*!< Command sent (no response required) */
+#define SDIO_STA_DATAEND ((uint32_t)0x00000100) /*!< Data end (data counter, SDIDCOUNT, is zero) */
+#define SDIO_STA_STBITERR ((uint32_t)0x00000200) /*!< Start bit not detected on all data signals in wide bus mode */
+#define SDIO_STA_DBCKEND ((uint32_t)0x00000400) /*!< Data block sent/received (CRC check passed) */
+#define SDIO_STA_CMDACT ((uint32_t)0x00000800) /*!< Command transfer in progress */
+#define SDIO_STA_TXACT ((uint32_t)0x00001000) /*!< Data transmit in progress */
+#define SDIO_STA_RXACT ((uint32_t)0x00002000) /*!< Data receive in progress */
+#define SDIO_STA_TXFIFOHE ((uint32_t)0x00004000) /*!< Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
+#define SDIO_STA_RXFIFOHF ((uint32_t)0x00008000) /*!< Receive FIFO Half Full: there are at least 8 words in the FIFO */
+#define SDIO_STA_TXFIFOF ((uint32_t)0x00010000) /*!< Transmit FIFO full */
+#define SDIO_STA_RXFIFOF ((uint32_t)0x00020000) /*!< Receive FIFO full */
+#define SDIO_STA_TXFIFOE ((uint32_t)0x00040000) /*!< Transmit FIFO empty */
+#define SDIO_STA_RXFIFOE ((uint32_t)0x00080000) /*!< Receive FIFO empty */
+#define SDIO_STA_TXDAVL ((uint32_t)0x00100000) /*!< Data available in transmit FIFO */
+#define SDIO_STA_RXDAVL ((uint32_t)0x00200000) /*!< Data available in receive FIFO */
+#define SDIO_STA_SDIOIT ((uint32_t)0x00400000) /*!< SDIO interrupt received */
+#define SDIO_STA_CEATAEND ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received for CMD61 */
+
+/******************* Bit definition for SDIO_ICR register *******************/
+#define SDIO_ICR_CCRCFAILC ((uint32_t)0x00000001) /*!< CCRCFAIL flag clear bit */
+#define SDIO_ICR_DCRCFAILC ((uint32_t)0x00000002) /*!< DCRCFAIL flag clear bit */
+#define SDIO_ICR_CTIMEOUTC ((uint32_t)0x00000004) /*!< CTIMEOUT flag clear bit */
+#define SDIO_ICR_DTIMEOUTC ((uint32_t)0x00000008) /*!< DTIMEOUT flag clear bit */
+#define SDIO_ICR_TXUNDERRC ((uint32_t)0x00000010) /*!< TXUNDERR flag clear bit */
+#define SDIO_ICR_RXOVERRC ((uint32_t)0x00000020) /*!< RXOVERR flag clear bit */
+#define SDIO_ICR_CMDRENDC ((uint32_t)0x00000040) /*!< CMDREND flag clear bit */
+#define SDIO_ICR_CMDSENTC ((uint32_t)0x00000080) /*!< CMDSENT flag clear bit */
+#define SDIO_ICR_DATAENDC ((uint32_t)0x00000100) /*!< DATAEND flag clear bit */
+#define SDIO_ICR_STBITERRC ((uint32_t)0x00000200) /*!< STBITERR flag clear bit */
+#define SDIO_ICR_DBCKENDC ((uint32_t)0x00000400) /*!< DBCKEND flag clear bit */
+#define SDIO_ICR_SDIOITC ((uint32_t)0x00400000) /*!< SDIOIT flag clear bit */
+#define SDIO_ICR_CEATAENDC ((uint32_t)0x00800000) /*!< CEATAEND flag clear bit */
+
+/****************** Bit definition for SDIO_MASK register *******************/
+#define SDIO_MASK_CCRCFAILIE ((uint32_t)0x00000001) /*!< Command CRC Fail Interrupt Enable */
+#define SDIO_MASK_DCRCFAILIE ((uint32_t)0x00000002) /*!< Data CRC Fail Interrupt Enable */
+#define SDIO_MASK_CTIMEOUTIE ((uint32_t)0x00000004) /*!< Command TimeOut Interrupt Enable */
+#define SDIO_MASK_DTIMEOUTIE ((uint32_t)0x00000008) /*!< Data TimeOut Interrupt Enable */
+#define SDIO_MASK_TXUNDERRIE ((uint32_t)0x00000010) /*!< Tx FIFO UnderRun Error Interrupt Enable */
+#define SDIO_MASK_RXOVERRIE ((uint32_t)0x00000020) /*!< Rx FIFO OverRun Error Interrupt Enable */
+#define SDIO_MASK_CMDRENDIE ((uint32_t)0x00000040) /*!< Command Response Received Interrupt Enable */
+#define SDIO_MASK_CMDSENTIE ((uint32_t)0x00000080) /*!< Command Sent Interrupt Enable */
+#define SDIO_MASK_DATAENDIE ((uint32_t)0x00000100) /*!< Data End Interrupt Enable */
+#define SDIO_MASK_STBITERRIE ((uint32_t)0x00000200) /*!< Start Bit Error Interrupt Enable */
+#define SDIO_MASK_DBCKENDIE ((uint32_t)0x00000400) /*!< Data Block End Interrupt Enable */
+#define SDIO_MASK_CMDACTIE ((uint32_t)0x00000800) /*!< Command Acting Interrupt Enable */
+#define SDIO_MASK_TXACTIE ((uint32_t)0x00001000) /*!< Data Transmit Acting Interrupt Enable */
+#define SDIO_MASK_RXACTIE ((uint32_t)0x00002000) /*!< Data receive acting interrupt enabled */
+#define SDIO_MASK_TXFIFOHEIE ((uint32_t)0x00004000) /*!< Tx FIFO Half Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOHFIE ((uint32_t)0x00008000) /*!< Rx FIFO Half Full interrupt Enable */
+#define SDIO_MASK_TXFIFOFIE ((uint32_t)0x00010000) /*!< Tx FIFO Full interrupt Enable */
+#define SDIO_MASK_RXFIFOFIE ((uint32_t)0x00020000) /*!< Rx FIFO Full interrupt Enable */
+#define SDIO_MASK_TXFIFOEIE ((uint32_t)0x00040000) /*!< Tx FIFO Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOEIE ((uint32_t)0x00080000) /*!< Rx FIFO Empty interrupt Enable */
+#define SDIO_MASK_TXDAVLIE ((uint32_t)0x00100000) /*!< Data available in Tx FIFO interrupt Enable */
+#define SDIO_MASK_RXDAVLIE ((uint32_t)0x00200000) /*!< Data available in Rx FIFO interrupt Enable */
+#define SDIO_MASK_SDIOITIE ((uint32_t)0x00400000) /*!< SDIO Mode Interrupt Received interrupt Enable */
+#define SDIO_MASK_CEATAENDIE ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received Interrupt Enable */
+
+/***************** Bit definition for SDIO_FIFOCNT register *****************/
+#define SDIO_FIFOCNT_FIFOCOUNT ((uint32_t)0x00FFFFFF) /*!< Remaining number of words to be written to or read from the FIFO */
+
+/****************** Bit definition for SDIO_FIFO register *******************/
+#define SDIO_FIFO_FIFODATA ((uint32_t)0xFFFFFFFF) /*!< Receive and transmit FIFO data */
+
+/******************************************************************************/
+/* */
+/* USB Device FS */
+/* */
+/******************************************************************************/
+
+/*!< Endpoint-specific registers */
+/******************* Bit definition for USB_EP0R register *******************/
+#define USB_EP0R_EA ((uint16_t)0x000F) /*!< Endpoint Address */
+
+#define USB_EP0R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP0R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define USB_EP0R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */
+
+#define USB_EP0R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */
+#define USB_EP0R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */
+#define USB_EP0R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */
+
+#define USB_EP0R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP0R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */
+#define USB_EP0R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */
+
+#define USB_EP0R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */
+
+#define USB_EP0R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP0R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define USB_EP0R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define USB_EP0R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */
+#define USB_EP0R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */
+
+/******************* Bit definition for USB_EP1R register *******************/
+#define USB_EP1R_EA ((uint16_t)0x000F) /*!< Endpoint Address */
+
+#define USB_EP1R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP1R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define USB_EP1R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */
+
+#define USB_EP1R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */
+#define USB_EP1R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */
+#define USB_EP1R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */
+
+#define USB_EP1R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP1R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */
+#define USB_EP1R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */
+
+#define USB_EP1R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */
+
+#define USB_EP1R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP1R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define USB_EP1R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define USB_EP1R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */
+#define USB_EP1R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */
+
+/******************* Bit definition for USB_EP2R register *******************/
+#define USB_EP2R_EA ((uint16_t)0x000F) /*!< Endpoint Address */
+
+#define USB_EP2R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP2R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define USB_EP2R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */
+
+#define USB_EP2R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */
+#define USB_EP2R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */
+#define USB_EP2R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */
+
+#define USB_EP2R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP2R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */
+#define USB_EP2R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */
+
+#define USB_EP2R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */
+
+#define USB_EP2R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP2R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define USB_EP2R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define USB_EP2R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */
+#define USB_EP2R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */
+
+/******************* Bit definition for USB_EP3R register *******************/
+#define USB_EP3R_EA ((uint16_t)0x000F) /*!< Endpoint Address */
+
+#define USB_EP3R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP3R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define USB_EP3R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */
+
+#define USB_EP3R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */
+#define USB_EP3R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */
+#define USB_EP3R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */
+
+#define USB_EP3R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP3R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */
+#define USB_EP3R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */
+
+#define USB_EP3R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */
+
+#define USB_EP3R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP3R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define USB_EP3R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define USB_EP3R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */
+#define USB_EP3R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */
+
+/******************* Bit definition for USB_EP4R register *******************/
+#define USB_EP4R_EA ((uint16_t)0x000F) /*!< Endpoint Address */
+
+#define USB_EP4R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP4R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define USB_EP4R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */
+
+#define USB_EP4R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */
+#define USB_EP4R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */
+#define USB_EP4R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */
+
+#define USB_EP4R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP4R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */
+#define USB_EP4R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */
+
+#define USB_EP4R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */
+
+#define USB_EP4R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP4R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define USB_EP4R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define USB_EP4R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */
+#define USB_EP4R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */
+
+/******************* Bit definition for USB_EP5R register *******************/
+#define USB_EP5R_EA ((uint16_t)0x000F) /*!< Endpoint Address */
+
+#define USB_EP5R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP5R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define USB_EP5R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */
+
+#define USB_EP5R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */
+#define USB_EP5R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */
+#define USB_EP5R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */
+
+#define USB_EP5R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP5R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */
+#define USB_EP5R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */
+
+#define USB_EP5R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */
+
+#define USB_EP5R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP5R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define USB_EP5R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define USB_EP5R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */
+#define USB_EP5R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */
+
+/******************* Bit definition for USB_EP6R register *******************/
+#define USB_EP6R_EA ((uint16_t)0x000F) /*!< Endpoint Address */
+
+#define USB_EP6R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP6R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define USB_EP6R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */
+
+#define USB_EP6R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */
+#define USB_EP6R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */
+#define USB_EP6R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */
+
+#define USB_EP6R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP6R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */
+#define USB_EP6R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */
+
+#define USB_EP6R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */
+
+#define USB_EP6R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP6R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define USB_EP6R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define USB_EP6R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */
+#define USB_EP6R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */
+
+/******************* Bit definition for USB_EP7R register *******************/
+#define USB_EP7R_EA ((uint16_t)0x000F) /*!< Endpoint Address */
+
+#define USB_EP7R_STAT_TX ((uint16_t)0x0030) /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define USB_EP7R_STAT_TX_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define USB_EP7R_STAT_TX_1 ((uint16_t)0x0020) /*!< Bit 1 */
+
+#define USB_EP7R_DTOG_TX ((uint16_t)0x0040) /*!< Data Toggle, for transmission transfers */
+#define USB_EP7R_CTR_TX ((uint16_t)0x0080) /*!< Correct Transfer for transmission */
+#define USB_EP7R_EP_KIND ((uint16_t)0x0100) /*!< Endpoint Kind */
+
+#define USB_EP7R_EP_TYPE ((uint16_t)0x0600) /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define USB_EP7R_EP_TYPE_0 ((uint16_t)0x0200) /*!< Bit 0 */
+#define USB_EP7R_EP_TYPE_1 ((uint16_t)0x0400) /*!< Bit 1 */
+
+#define USB_EP7R_SETUP ((uint16_t)0x0800) /*!< Setup transaction completed */
+
+#define USB_EP7R_STAT_RX ((uint16_t)0x3000) /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define USB_EP7R_STAT_RX_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define USB_EP7R_STAT_RX_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define USB_EP7R_DTOG_RX ((uint16_t)0x4000) /*!< Data Toggle, for reception transfers */
+#define USB_EP7R_CTR_RX ((uint16_t)0x8000) /*!< Correct Transfer for reception */
+
+/*!< Common registers */
+/******************* Bit definition for USB_CNTR register *******************/
+#define USB_CNTR_FRES ((uint16_t)0x0001) /*!< Force USB Reset */
+#define USB_CNTR_PDWN ((uint16_t)0x0002) /*!< Power down */
+#define USB_CNTR_LP_MODE ((uint16_t)0x0004) /*!< Low-power mode */
+#define USB_CNTR_FSUSP ((uint16_t)0x0008) /*!< Force suspend */
+#define USB_CNTR_RESUME ((uint16_t)0x0010) /*!< Resume request */
+#define USB_CNTR_ESOFM ((uint16_t)0x0100) /*!< Expected Start Of Frame Interrupt Mask */
+#define USB_CNTR_SOFM ((uint16_t)0x0200) /*!< Start Of Frame Interrupt Mask */
+#define USB_CNTR_RESETM ((uint16_t)0x0400) /*!< RESET Interrupt Mask */
+#define USB_CNTR_SUSPM ((uint16_t)0x0800) /*!< Suspend mode Interrupt Mask */
+#define USB_CNTR_WKUPM ((uint16_t)0x1000) /*!< Wakeup Interrupt Mask */
+#define USB_CNTR_ERRM ((uint16_t)0x2000) /*!< Error Interrupt Mask */
+#define USB_CNTR_PMAOVRM ((uint16_t)0x4000) /*!< Packet Memory Area Over / Underrun Interrupt Mask */
+#define USB_CNTR_CTRM ((uint16_t)0x8000) /*!< Correct Transfer Interrupt Mask */
+
+/******************* Bit definition for USB_ISTR register *******************/
+#define USB_ISTR_EP_ID ((uint16_t)0x000F) /*!< Endpoint Identifier */
+#define USB_ISTR_DIR ((uint16_t)0x0010) /*!< Direction of transaction */
+#define USB_ISTR_ESOF ((uint16_t)0x0100) /*!< Expected Start Of Frame */
+#define USB_ISTR_SOF ((uint16_t)0x0200) /*!< Start Of Frame */
+#define USB_ISTR_RESET ((uint16_t)0x0400) /*!< USB RESET request */
+#define USB_ISTR_SUSP ((uint16_t)0x0800) /*!< Suspend mode request */
+#define USB_ISTR_WKUP ((uint16_t)0x1000) /*!< Wake up */
+#define USB_ISTR_ERR ((uint16_t)0x2000) /*!< Error */
+#define USB_ISTR_PMAOVR ((uint16_t)0x4000) /*!< Packet Memory Area Over / Underrun */
+#define USB_ISTR_CTR ((uint16_t)0x8000) /*!< Correct Transfer */
+
+/******************* Bit definition for USB_FNR register ********************/
+#define USB_FNR_FN ((uint16_t)0x07FF) /*!< Frame Number */
+#define USB_FNR_LSOF ((uint16_t)0x1800) /*!< Lost SOF */
+#define USB_FNR_LCK ((uint16_t)0x2000) /*!< Locked */
+#define USB_FNR_RXDM ((uint16_t)0x4000) /*!< Receive Data - Line Status */
+#define USB_FNR_RXDP ((uint16_t)0x8000) /*!< Receive Data + Line Status */
+
+/****************** Bit definition for USB_DADDR register *******************/
+#define USB_DADDR_ADD ((uint8_t)0x7F) /*!< ADD[6:0] bits (Device Address) */
+#define USB_DADDR_ADD0 ((uint8_t)0x01) /*!< Bit 0 */
+#define USB_DADDR_ADD1 ((uint8_t)0x02) /*!< Bit 1 */
+#define USB_DADDR_ADD2 ((uint8_t)0x04) /*!< Bit 2 */
+#define USB_DADDR_ADD3 ((uint8_t)0x08) /*!< Bit 3 */
+#define USB_DADDR_ADD4 ((uint8_t)0x10) /*!< Bit 4 */
+#define USB_DADDR_ADD5 ((uint8_t)0x20) /*!< Bit 5 */
+#define USB_DADDR_ADD6 ((uint8_t)0x40) /*!< Bit 6 */
+
+#define USB_DADDR_EF ((uint8_t)0x80) /*!< Enable Function */
+
+/****************** Bit definition for USB_BTABLE register ******************/
+#define USB_BTABLE_BTABLE ((uint16_t)0xFFF8) /*!< Buffer Table */
+
+/*!< Buffer descriptor table */
+/***************** Bit definition for USB_ADDR0_TX register *****************/
+#define USB_ADDR0_TX_ADDR0_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 0 */
+
+/***************** Bit definition for USB_ADDR1_TX register *****************/
+#define USB_ADDR1_TX_ADDR1_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 1 */
+
+/***************** Bit definition for USB_ADDR2_TX register *****************/
+#define USB_ADDR2_TX_ADDR2_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 2 */
+
+/***************** Bit definition for USB_ADDR3_TX register *****************/
+#define USB_ADDR3_TX_ADDR3_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 3 */
+
+/***************** Bit definition for USB_ADDR4_TX register *****************/
+#define USB_ADDR4_TX_ADDR4_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 4 */
+
+/***************** Bit definition for USB_ADDR5_TX register *****************/
+#define USB_ADDR5_TX_ADDR5_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 5 */
+
+/***************** Bit definition for USB_ADDR6_TX register *****************/
+#define USB_ADDR6_TX_ADDR6_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 6 */
+
+/***************** Bit definition for USB_ADDR7_TX register *****************/
+#define USB_ADDR7_TX_ADDR7_TX ((uint16_t)0xFFFE) /*!< Transmission Buffer Address 7 */
+
+/*----------------------------------------------------------------------------*/
+
+/***************** Bit definition for USB_COUNT0_TX register ****************/
+#define USB_COUNT0_TX_COUNT0_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 0 */
+
+/***************** Bit definition for USB_COUNT1_TX register ****************/
+#define USB_COUNT1_TX_COUNT1_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 1 */
+
+/***************** Bit definition for USB_COUNT2_TX register ****************/
+#define USB_COUNT2_TX_COUNT2_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 2 */
+
+/***************** Bit definition for USB_COUNT3_TX register ****************/
+#define USB_COUNT3_TX_COUNT3_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 3 */
+
+/***************** Bit definition for USB_COUNT4_TX register ****************/
+#define USB_COUNT4_TX_COUNT4_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 4 */
+
+/***************** Bit definition for USB_COUNT5_TX register ****************/
+#define USB_COUNT5_TX_COUNT5_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 5 */
+
+/***************** Bit definition for USB_COUNT6_TX register ****************/
+#define USB_COUNT6_TX_COUNT6_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 6 */
+
+/***************** Bit definition for USB_COUNT7_TX register ****************/
+#define USB_COUNT7_TX_COUNT7_TX ((uint16_t)0x03FF) /*!< Transmission Byte Count 7 */
+
+/*----------------------------------------------------------------------------*/
+
+/**************** Bit definition for USB_COUNT0_TX_0 register ***************/
+#define USB_COUNT0_TX_0_COUNT0_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 0 (low) */
+
+/**************** Bit definition for USB_COUNT0_TX_1 register ***************/
+#define USB_COUNT0_TX_1_COUNT0_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 0 (high) */
+
+/**************** Bit definition for USB_COUNT1_TX_0 register ***************/
+#define USB_COUNT1_TX_0_COUNT1_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 1 (low) */
+
+/**************** Bit definition for USB_COUNT1_TX_1 register ***************/
+#define USB_COUNT1_TX_1_COUNT1_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 1 (high) */
+
+/**************** Bit definition for USB_COUNT2_TX_0 register ***************/
+#define USB_COUNT2_TX_0_COUNT2_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 2 (low) */
+
+/**************** Bit definition for USB_COUNT2_TX_1 register ***************/
+#define USB_COUNT2_TX_1_COUNT2_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 2 (high) */
+
+/**************** Bit definition for USB_COUNT3_TX_0 register ***************/
+#define USB_COUNT3_TX_0_COUNT3_TX_0 ((uint16_t)0x000003FF) /*!< Transmission Byte Count 3 (low) */
+
+/**************** Bit definition for USB_COUNT3_TX_1 register ***************/
+#define USB_COUNT3_TX_1_COUNT3_TX_1 ((uint16_t)0x03FF0000) /*!< Transmission Byte Count 3 (high) */
+
+/**************** Bit definition for USB_COUNT4_TX_0 register ***************/
+#define USB_COUNT4_TX_0_COUNT4_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 4 (low) */
+
+/**************** Bit definition for USB_COUNT4_TX_1 register ***************/
+#define USB_COUNT4_TX_1_COUNT4_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 4 (high) */
+
+/**************** Bit definition for USB_COUNT5_TX_0 register ***************/
+#define USB_COUNT5_TX_0_COUNT5_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 5 (low) */
+
+/**************** Bit definition for USB_COUNT5_TX_1 register ***************/
+#define USB_COUNT5_TX_1_COUNT5_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 5 (high) */
+
+/**************** Bit definition for USB_COUNT6_TX_0 register ***************/
+#define USB_COUNT6_TX_0_COUNT6_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 6 (low) */
+
+/**************** Bit definition for USB_COUNT6_TX_1 register ***************/
+#define USB_COUNT6_TX_1_COUNT6_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 6 (high) */
+
+/**************** Bit definition for USB_COUNT7_TX_0 register ***************/
+#define USB_COUNT7_TX_0_COUNT7_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 7 (low) */
+
+/**************** Bit definition for USB_COUNT7_TX_1 register ***************/
+#define USB_COUNT7_TX_1_COUNT7_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 7 (high) */
+
+/*----------------------------------------------------------------------------*/
+
+/***************** Bit definition for USB_ADDR0_RX register *****************/
+#define USB_ADDR0_RX_ADDR0_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 0 */
+
+/***************** Bit definition for USB_ADDR1_RX register *****************/
+#define USB_ADDR1_RX_ADDR1_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 1 */
+
+/***************** Bit definition for USB_ADDR2_RX register *****************/
+#define USB_ADDR2_RX_ADDR2_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 2 */
+
+/***************** Bit definition for USB_ADDR3_RX register *****************/
+#define USB_ADDR3_RX_ADDR3_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 3 */
+
+/***************** Bit definition for USB_ADDR4_RX register *****************/
+#define USB_ADDR4_RX_ADDR4_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 4 */
+
+/***************** Bit definition for USB_ADDR5_RX register *****************/
+#define USB_ADDR5_RX_ADDR5_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 5 */
+
+/***************** Bit definition for USB_ADDR6_RX register *****************/
+#define USB_ADDR6_RX_ADDR6_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 6 */
+
+/***************** Bit definition for USB_ADDR7_RX register *****************/
+#define USB_ADDR7_RX_ADDR7_RX ((uint16_t)0xFFFE) /*!< Reception Buffer Address 7 */
+
+/*----------------------------------------------------------------------------*/
+
+/***************** Bit definition for USB_COUNT0_RX register ****************/
+#define USB_COUNT0_RX_COUNT0_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */
+
+#define USB_COUNT0_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT0_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define USB_COUNT0_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */
+#define USB_COUNT0_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */
+#define USB_COUNT0_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */
+#define USB_COUNT0_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */
+
+#define USB_COUNT0_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */
+
+/***************** Bit definition for USB_COUNT1_RX register ****************/
+#define USB_COUNT1_RX_COUNT1_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */
+
+#define USB_COUNT1_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT1_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define USB_COUNT1_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */
+#define USB_COUNT1_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */
+#define USB_COUNT1_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */
+#define USB_COUNT1_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */
+
+#define USB_COUNT1_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */
+
+/***************** Bit definition for USB_COUNT2_RX register ****************/
+#define USB_COUNT2_RX_COUNT2_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */
+
+#define USB_COUNT2_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT2_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define USB_COUNT2_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */
+#define USB_COUNT2_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */
+#define USB_COUNT2_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */
+#define USB_COUNT2_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */
+
+#define USB_COUNT2_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */
+
+/***************** Bit definition for USB_COUNT3_RX register ****************/
+#define USB_COUNT3_RX_COUNT3_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */
+
+#define USB_COUNT3_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT3_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define USB_COUNT3_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */
+#define USB_COUNT3_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */
+#define USB_COUNT3_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */
+#define USB_COUNT3_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */
+
+#define USB_COUNT3_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */
+
+/***************** Bit definition for USB_COUNT4_RX register ****************/
+#define USB_COUNT4_RX_COUNT4_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */
+
+#define USB_COUNT4_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT4_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define USB_COUNT4_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */
+#define USB_COUNT4_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */
+#define USB_COUNT4_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */
+#define USB_COUNT4_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */
+
+#define USB_COUNT4_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */
+
+/***************** Bit definition for USB_COUNT5_RX register ****************/
+#define USB_COUNT5_RX_COUNT5_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */
+
+#define USB_COUNT5_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT5_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define USB_COUNT5_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */
+#define USB_COUNT5_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */
+#define USB_COUNT5_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */
+#define USB_COUNT5_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */
+
+#define USB_COUNT5_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */
+
+/***************** Bit definition for USB_COUNT6_RX register ****************/
+#define USB_COUNT6_RX_COUNT6_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */
+
+#define USB_COUNT6_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT6_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define USB_COUNT6_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */
+#define USB_COUNT6_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */
+#define USB_COUNT6_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */
+#define USB_COUNT6_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */
+
+#define USB_COUNT6_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */
+
+/***************** Bit definition for USB_COUNT7_RX register ****************/
+#define USB_COUNT7_RX_COUNT7_RX ((uint16_t)0x03FF) /*!< Reception Byte Count */
+
+#define USB_COUNT7_RX_NUM_BLOCK ((uint16_t)0x7C00) /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define USB_COUNT7_RX_NUM_BLOCK_0 ((uint16_t)0x0400) /*!< Bit 0 */
+#define USB_COUNT7_RX_NUM_BLOCK_1 ((uint16_t)0x0800) /*!< Bit 1 */
+#define USB_COUNT7_RX_NUM_BLOCK_2 ((uint16_t)0x1000) /*!< Bit 2 */
+#define USB_COUNT7_RX_NUM_BLOCK_3 ((uint16_t)0x2000) /*!< Bit 3 */
+#define USB_COUNT7_RX_NUM_BLOCK_4 ((uint16_t)0x4000) /*!< Bit 4 */
+
+#define USB_COUNT7_RX_BLSIZE ((uint16_t)0x8000) /*!< BLock SIZE */
+
+/*----------------------------------------------------------------------------*/
+
+/**************** Bit definition for USB_COUNT0_RX_0 register ***************/
+#define USB_COUNT0_RX_0_COUNT0_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT0_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT0_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT0_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT0_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT0_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT0_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT0_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/**************** Bit definition for USB_COUNT0_RX_1 register ***************/
+#define USB_COUNT0_RX_1_COUNT0_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT0_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT0_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 1 */
+#define USB_COUNT0_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT0_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT0_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT0_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT0_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/**************** Bit definition for USB_COUNT1_RX_0 register ***************/
+#define USB_COUNT1_RX_0_COUNT1_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT1_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT1_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT1_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT1_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT1_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT1_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT1_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/**************** Bit definition for USB_COUNT1_RX_1 register ***************/
+#define USB_COUNT1_RX_1_COUNT1_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT1_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT1_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define USB_COUNT1_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT1_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT1_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT1_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT1_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/**************** Bit definition for USB_COUNT2_RX_0 register ***************/
+#define USB_COUNT2_RX_0_COUNT2_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT2_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT2_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT2_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT2_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT2_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT2_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT2_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/**************** Bit definition for USB_COUNT2_RX_1 register ***************/
+#define USB_COUNT2_RX_1_COUNT2_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT2_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT2_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define USB_COUNT2_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT2_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT2_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT2_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT2_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/**************** Bit definition for USB_COUNT3_RX_0 register ***************/
+#define USB_COUNT3_RX_0_COUNT3_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT3_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT3_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT3_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT3_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT3_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT3_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT3_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/**************** Bit definition for USB_COUNT3_RX_1 register ***************/
+#define USB_COUNT3_RX_1_COUNT3_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT3_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT3_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define USB_COUNT3_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT3_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT3_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT3_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT3_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/**************** Bit definition for USB_COUNT4_RX_0 register ***************/
+#define USB_COUNT4_RX_0_COUNT4_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT4_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT4_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT4_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT4_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT4_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT4_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT4_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/**************** Bit definition for USB_COUNT4_RX_1 register ***************/
+#define USB_COUNT4_RX_1_COUNT4_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT4_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT4_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define USB_COUNT4_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT4_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT4_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT4_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT4_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/**************** Bit definition for USB_COUNT5_RX_0 register ***************/
+#define USB_COUNT5_RX_0_COUNT5_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT5_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT5_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT5_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT5_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT5_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT5_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT5_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/**************** Bit definition for USB_COUNT5_RX_1 register ***************/
+#define USB_COUNT5_RX_1_COUNT5_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT5_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT5_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define USB_COUNT5_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT5_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT5_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT5_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT5_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/*************** Bit definition for USB_COUNT6_RX_0 register ***************/
+#define USB_COUNT6_RX_0_COUNT6_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT6_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT6_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT6_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT6_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT6_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT6_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT6_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/**************** Bit definition for USB_COUNT6_RX_1 register ***************/
+#define USB_COUNT6_RX_1_COUNT6_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT6_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT6_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define USB_COUNT6_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT6_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT6_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT6_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT6_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/*************** Bit definition for USB_COUNT7_RX_0 register ****************/
+#define USB_COUNT7_RX_0_COUNT7_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
+
+#define USB_COUNT7_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define USB_COUNT7_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define USB_COUNT7_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define USB_COUNT7_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+#define USB_COUNT7_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
+#define USB_COUNT7_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
+
+#define USB_COUNT7_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
+
+/*************** Bit definition for USB_COUNT7_RX_1 register ****************/
+#define USB_COUNT7_RX_1_COUNT7_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
+
+#define USB_COUNT7_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define USB_COUNT7_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define USB_COUNT7_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define USB_COUNT7_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define USB_COUNT7_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define USB_COUNT7_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+
+#define USB_COUNT7_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
+
+/******************************************************************************/
+/* */
+/* Controller Area Network */
+/* */
+/******************************************************************************/
+
+/*!< CAN control and status registers */
+/******************* Bit definition for CAN_MCR register ********************/
+#define CAN_MCR_INRQ ((uint16_t)0x0001) /*!< Initialization Request */
+#define CAN_MCR_SLEEP ((uint16_t)0x0002) /*!< Sleep Mode Request */
+#define CAN_MCR_TXFP ((uint16_t)0x0004) /*!< Transmit FIFO Priority */
+#define CAN_MCR_RFLM ((uint16_t)0x0008) /*!< Receive FIFO Locked Mode */
+#define CAN_MCR_NART ((uint16_t)0x0010) /*!< No Automatic Retransmission */
+#define CAN_MCR_AWUM ((uint16_t)0x0020) /*!< Automatic Wakeup Mode */
+#define CAN_MCR_ABOM ((uint16_t)0x0040) /*!< Automatic Bus-Off Management */
+#define CAN_MCR_TTCM ((uint16_t)0x0080) /*!< Time Triggered Communication Mode */
+#define CAN_MCR_RESET ((uint16_t)0x8000) /*!< CAN software master reset */
+
+/******************* Bit definition for CAN_MSR register ********************/
+#define CAN_MSR_INAK ((uint16_t)0x0001) /*!< Initialization Acknowledge */
+#define CAN_MSR_SLAK ((uint16_t)0x0002) /*!< Sleep Acknowledge */
+#define CAN_MSR_ERRI ((uint16_t)0x0004) /*!< Error Interrupt */
+#define CAN_MSR_WKUI ((uint16_t)0x0008) /*!< Wakeup Interrupt */
+#define CAN_MSR_SLAKI ((uint16_t)0x0010) /*!< Sleep Acknowledge Interrupt */
+#define CAN_MSR_TXM ((uint16_t)0x0100) /*!< Transmit Mode */
+#define CAN_MSR_RXM ((uint16_t)0x0200) /*!< Receive Mode */
+#define CAN_MSR_SAMP ((uint16_t)0x0400) /*!< Last Sample Point */
+#define CAN_MSR_RX ((uint16_t)0x0800) /*!< CAN Rx Signal */
+
+/******************* Bit definition for CAN_TSR register ********************/
+#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!< Request Completed Mailbox0 */
+#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!< Transmission OK of Mailbox0 */
+#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!< Arbitration Lost for Mailbox0 */
+#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!< Transmission Error of Mailbox0 */
+#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!< Abort Request for Mailbox0 */
+#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!< Request Completed Mailbox1 */
+#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!< Transmission OK of Mailbox1 */
+#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!< Arbitration Lost for Mailbox1 */
+#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!< Transmission Error of Mailbox1 */
+#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!< Abort Request for Mailbox 1 */
+#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!< Request Completed Mailbox2 */
+#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!< Transmission OK of Mailbox 2 */
+#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!< Arbitration Lost for mailbox 2 */
+#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!< Transmission Error of Mailbox 2 */
+#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!< Abort Request for Mailbox 2 */
+#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!< Mailbox Code */
+
+#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!< TME[2:0] bits */
+#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!< Transmit Mailbox 0 Empty */
+#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!< Transmit Mailbox 1 Empty */
+#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!< Transmit Mailbox 2 Empty */
+
+#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!< LOW[2:0] bits */
+#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!< Lowest Priority Flag for Mailbox 0 */
+#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!< Lowest Priority Flag for Mailbox 1 */
+#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!< Lowest Priority Flag for Mailbox 2 */
+
+/******************* Bit definition for CAN_RF0R register *******************/
+#define CAN_RF0R_FMP0 ((uint8_t)0x03) /*!< FIFO 0 Message Pending */
+#define CAN_RF0R_FULL0 ((uint8_t)0x08) /*!< FIFO 0 Full */
+#define CAN_RF0R_FOVR0 ((uint8_t)0x10) /*!< FIFO 0 Overrun */
+#define CAN_RF0R_RFOM0 ((uint8_t)0x20) /*!< Release FIFO 0 Output Mailbox */
+
+/******************* Bit definition for CAN_RF1R register *******************/
+#define CAN_RF1R_FMP1 ((uint8_t)0x03) /*!< FIFO 1 Message Pending */
+#define CAN_RF1R_FULL1 ((uint8_t)0x08) /*!< FIFO 1 Full */
+#define CAN_RF1R_FOVR1 ((uint8_t)0x10) /*!< FIFO 1 Overrun */
+#define CAN_RF1R_RFOM1 ((uint8_t)0x20) /*!< Release FIFO 1 Output Mailbox */
+
+/******************** Bit definition for CAN_IER register *******************/
+#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!< Transmit Mailbox Empty Interrupt Enable */
+#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!< FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!< FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!< FIFO Overrun Interrupt Enable */
+#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!< FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!< FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!< FIFO Overrun Interrupt Enable */
+#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!< Error Warning Interrupt Enable */
+#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!< Error Passive Interrupt Enable */
+#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!< Bus-Off Interrupt Enable */
+#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!< Last Error Code Interrupt Enable */
+#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!< Error Interrupt Enable */
+#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!< Wakeup Interrupt Enable */
+#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!< Sleep Interrupt Enable */
+
+/******************** Bit definition for CAN_ESR register *******************/
+#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!< Error Warning Flag */
+#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!< Error Passive Flag */
+#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!< Bus-Off Flag */
+
+#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!< LEC[2:0] bits (Last Error Code) */
+#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+
+#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!< Least significant byte of the 9-bit Transmit Error Counter */
+#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!< Receive Error Counter */
+
+/******************* Bit definition for CAN_BTR register ********************/
+#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!< Baud Rate Prescaler */
+#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!< Time Segment 1 */
+#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!< Time Segment 2 */
+#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!< Resynchronization Jump Width */
+#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!< Loop Back Mode (Debug) */
+#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!< Silent Mode */
+
+/*!< Mailbox registers */
+/****************** Bit definition for CAN_TI0R register ********************/
+#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */
+#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */
+#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */
+#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */
+#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */
+
+/****************** Bit definition for CAN_TDT0R register *******************/
+#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */
+#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */
+#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */
+
+/****************** Bit definition for CAN_TDL0R register *******************/
+#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */
+#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */
+#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */
+#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */
+
+/****************** Bit definition for CAN_TDH0R register *******************/
+#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */
+#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */
+#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */
+#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */
+
+/******************* Bit definition for CAN_TI1R register *******************/
+#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */
+#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */
+#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */
+#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */
+#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT1R register ******************/
+#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */
+#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */
+#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL1R register ******************/
+#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */
+#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */
+#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */
+#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */
+
+/******************* Bit definition for CAN_TDH1R register ******************/
+#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */
+#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */
+#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */
+#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */
+
+/******************* Bit definition for CAN_TI2R register *******************/
+#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!< Transmit Mailbox Request */
+#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */
+#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */
+#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!< Extended identifier */
+#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT2R register ******************/
+#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */
+#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!< Transmit Global Time */
+#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL2R register ******************/
+#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */
+#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */
+#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */
+#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */
+
+/******************* Bit definition for CAN_TDH2R register ******************/
+#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */
+#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */
+#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */
+#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */
+
+/******************* Bit definition for CAN_RI0R register *******************/
+#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */
+#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */
+#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!< Extended Identifier */
+#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT0R register ******************/
+#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */
+#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!< Filter Match Index */
+#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL0R register ******************/
+#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */
+#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */
+#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */
+#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */
+
+/******************* Bit definition for CAN_RDH0R register ******************/
+#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */
+#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */
+#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */
+#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */
+
+/******************* Bit definition for CAN_RI1R register *******************/
+#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!< Remote Transmission Request */
+#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!< Identifier Extension */
+#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!< Extended identifier */
+#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!< Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT1R register ******************/
+#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!< Data Length Code */
+#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!< Filter Match Index */
+#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!< Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL1R register ******************/
+#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!< Data byte 0 */
+#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!< Data byte 1 */
+#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!< Data byte 2 */
+#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!< Data byte 3 */
+
+/******************* Bit definition for CAN_RDH1R register ******************/
+#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!< Data byte 4 */
+#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!< Data byte 5 */
+#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!< Data byte 6 */
+#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!< Data byte 7 */
+
+/*!< CAN filter registers */
+/******************* Bit definition for CAN_FMR register ********************/
+#define CAN_FMR_FINIT ((uint8_t)0x01) /*!< Filter Init Mode */
+
+/******************* Bit definition for CAN_FM1R register *******************/
+#define CAN_FM1R_FBM ((uint16_t)0x3FFF) /*!< Filter Mode */
+#define CAN_FM1R_FBM0 ((uint16_t)0x0001) /*!< Filter Init Mode bit 0 */
+#define CAN_FM1R_FBM1 ((uint16_t)0x0002) /*!< Filter Init Mode bit 1 */
+#define CAN_FM1R_FBM2 ((uint16_t)0x0004) /*!< Filter Init Mode bit 2 */
+#define CAN_FM1R_FBM3 ((uint16_t)0x0008) /*!< Filter Init Mode bit 3 */
+#define CAN_FM1R_FBM4 ((uint16_t)0x0010) /*!< Filter Init Mode bit 4 */
+#define CAN_FM1R_FBM5 ((uint16_t)0x0020) /*!< Filter Init Mode bit 5 */
+#define CAN_FM1R_FBM6 ((uint16_t)0x0040) /*!< Filter Init Mode bit 6 */
+#define CAN_FM1R_FBM7 ((uint16_t)0x0080) /*!< Filter Init Mode bit 7 */
+#define CAN_FM1R_FBM8 ((uint16_t)0x0100) /*!< Filter Init Mode bit 8 */
+#define CAN_FM1R_FBM9 ((uint16_t)0x0200) /*!< Filter Init Mode bit 9 */
+#define CAN_FM1R_FBM10 ((uint16_t)0x0400) /*!< Filter Init Mode bit 10 */
+#define CAN_FM1R_FBM11 ((uint16_t)0x0800) /*!< Filter Init Mode bit 11 */
+#define CAN_FM1R_FBM12 ((uint16_t)0x1000) /*!< Filter Init Mode bit 12 */
+#define CAN_FM1R_FBM13 ((uint16_t)0x2000) /*!< Filter Init Mode bit 13 */
+
+/******************* Bit definition for CAN_FS1R register *******************/
+#define CAN_FS1R_FSC ((uint16_t)0x3FFF) /*!< Filter Scale Configuration */
+#define CAN_FS1R_FSC0 ((uint16_t)0x0001) /*!< Filter Scale Configuration bit 0 */
+#define CAN_FS1R_FSC1 ((uint16_t)0x0002) /*!< Filter Scale Configuration bit 1 */
+#define CAN_FS1R_FSC2 ((uint16_t)0x0004) /*!< Filter Scale Configuration bit 2 */
+#define CAN_FS1R_FSC3 ((uint16_t)0x0008) /*!< Filter Scale Configuration bit 3 */
+#define CAN_FS1R_FSC4 ((uint16_t)0x0010) /*!< Filter Scale Configuration bit 4 */
+#define CAN_FS1R_FSC5 ((uint16_t)0x0020) /*!< Filter Scale Configuration bit 5 */
+#define CAN_FS1R_FSC6 ((uint16_t)0x0040) /*!< Filter Scale Configuration bit 6 */
+#define CAN_FS1R_FSC7 ((uint16_t)0x0080) /*!< Filter Scale Configuration bit 7 */
+#define CAN_FS1R_FSC8 ((uint16_t)0x0100) /*!< Filter Scale Configuration bit 8 */
+#define CAN_FS1R_FSC9 ((uint16_t)0x0200) /*!< Filter Scale Configuration bit 9 */
+#define CAN_FS1R_FSC10 ((uint16_t)0x0400) /*!< Filter Scale Configuration bit 10 */
+#define CAN_FS1R_FSC11 ((uint16_t)0x0800) /*!< Filter Scale Configuration bit 11 */
+#define CAN_FS1R_FSC12 ((uint16_t)0x1000) /*!< Filter Scale Configuration bit 12 */
+#define CAN_FS1R_FSC13 ((uint16_t)0x2000) /*!< Filter Scale Configuration bit 13 */
+
+/****************** Bit definition for CAN_FFA1R register *******************/
+#define CAN_FFA1R_FFA ((uint16_t)0x3FFF) /*!< Filter FIFO Assignment */
+#define CAN_FFA1R_FFA0 ((uint16_t)0x0001) /*!< Filter FIFO Assignment for Filter 0 */
+#define CAN_FFA1R_FFA1 ((uint16_t)0x0002) /*!< Filter FIFO Assignment for Filter 1 */
+#define CAN_FFA1R_FFA2 ((uint16_t)0x0004) /*!< Filter FIFO Assignment for Filter 2 */
+#define CAN_FFA1R_FFA3 ((uint16_t)0x0008) /*!< Filter FIFO Assignment for Filter 3 */
+#define CAN_FFA1R_FFA4 ((uint16_t)0x0010) /*!< Filter FIFO Assignment for Filter 4 */
+#define CAN_FFA1R_FFA5 ((uint16_t)0x0020) /*!< Filter FIFO Assignment for Filter 5 */
+#define CAN_FFA1R_FFA6 ((uint16_t)0x0040) /*!< Filter FIFO Assignment for Filter 6 */
+#define CAN_FFA1R_FFA7 ((uint16_t)0x0080) /*!< Filter FIFO Assignment for Filter 7 */
+#define CAN_FFA1R_FFA8 ((uint16_t)0x0100) /*!< Filter FIFO Assignment for Filter 8 */
+#define CAN_FFA1R_FFA9 ((uint16_t)0x0200) /*!< Filter FIFO Assignment for Filter 9 */
+#define CAN_FFA1R_FFA10 ((uint16_t)0x0400) /*!< Filter FIFO Assignment for Filter 10 */
+#define CAN_FFA1R_FFA11 ((uint16_t)0x0800) /*!< Filter FIFO Assignment for Filter 11 */
+#define CAN_FFA1R_FFA12 ((uint16_t)0x1000) /*!< Filter FIFO Assignment for Filter 12 */
+#define CAN_FFA1R_FFA13 ((uint16_t)0x2000) /*!< Filter FIFO Assignment for Filter 13 */
+
+/******************* Bit definition for CAN_FA1R register *******************/
+#define CAN_FA1R_FACT ((uint16_t)0x3FFF) /*!< Filter Active */
+#define CAN_FA1R_FACT0 ((uint16_t)0x0001) /*!< Filter 0 Active */
+#define CAN_FA1R_FACT1 ((uint16_t)0x0002) /*!< Filter 1 Active */
+#define CAN_FA1R_FACT2 ((uint16_t)0x0004) /*!< Filter 2 Active */
+#define CAN_FA1R_FACT3 ((uint16_t)0x0008) /*!< Filter 3 Active */
+#define CAN_FA1R_FACT4 ((uint16_t)0x0010) /*!< Filter 4 Active */
+#define CAN_FA1R_FACT5 ((uint16_t)0x0020) /*!< Filter 5 Active */
+#define CAN_FA1R_FACT6 ((uint16_t)0x0040) /*!< Filter 6 Active */
+#define CAN_FA1R_FACT7 ((uint16_t)0x0080) /*!< Filter 7 Active */
+#define CAN_FA1R_FACT8 ((uint16_t)0x0100) /*!< Filter 8 Active */
+#define CAN_FA1R_FACT9 ((uint16_t)0x0200) /*!< Filter 9 Active */
+#define CAN_FA1R_FACT10 ((uint16_t)0x0400) /*!< Filter 10 Active */
+#define CAN_FA1R_FACT11 ((uint16_t)0x0800) /*!< Filter 11 Active */
+#define CAN_FA1R_FACT12 ((uint16_t)0x1000) /*!< Filter 12 Active */
+#define CAN_FA1R_FACT13 ((uint16_t)0x2000) /*!< Filter 13 Active */
+
+/******************* Bit definition for CAN_F0R1 register *******************/
+#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R1 register *******************/
+#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R1 register *******************/
+#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R1 register *******************/
+#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R1 register *******************/
+#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R1 register *******************/
+#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R1 register *******************/
+#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R1 register *******************/
+#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R1 register *******************/
+#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R1 register *******************/
+#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R1 register ******************/
+#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R1 register ******************/
+#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R1 register ******************/
+#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R1 register ******************/
+#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F0R2 register *******************/
+#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R2 register *******************/
+#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R2 register *******************/
+#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R2 register *******************/
+#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R2 register *******************/
+#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R2 register *******************/
+#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R2 register *******************/
+#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R2 register *******************/
+#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R2 register *******************/
+#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R2 register *******************/
+#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R2 register ******************/
+#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R2 register ******************/
+#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R2 register ******************/
+#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R2 register ******************/
+#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!< Filter bit 0 */
+#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!< Filter bit 1 */
+#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!< Filter bit 2 */
+#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!< Filter bit 3 */
+#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!< Filter bit 4 */
+#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!< Filter bit 5 */
+#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!< Filter bit 6 */
+#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!< Filter bit 7 */
+#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!< Filter bit 8 */
+#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!< Filter bit 9 */
+#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!< Filter bit 10 */
+#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!< Filter bit 11 */
+#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!< Filter bit 12 */
+#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!< Filter bit 13 */
+#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!< Filter bit 14 */
+#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!< Filter bit 15 */
+#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!< Filter bit 16 */
+#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!< Filter bit 17 */
+#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!< Filter bit 18 */
+#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!< Filter bit 19 */
+#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!< Filter bit 20 */
+#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!< Filter bit 21 */
+#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!< Filter bit 22 */
+#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!< Filter bit 23 */
+#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!< Filter bit 24 */
+#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!< Filter bit 25 */
+#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!< Filter bit 26 */
+#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!< Filter bit 27 */
+#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!< Filter bit 28 */
+#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!< Filter bit 29 */
+#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!< Filter bit 30 */
+#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!< Filter bit 31 */
+
+/******************************************************************************/
+/* */
+/* Serial Peripheral Interface */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for SPI_CR1 register ********************/
+#define SPI_CR1_CPHA ((uint16_t)0x0001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint16_t)0x0002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint16_t)0x0004) /*!< Master Selection */
+
+#define SPI_CR1_BR ((uint16_t)0x0038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint16_t)0x0008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint16_t)0x0010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint16_t)0x0020) /*!< Bit 2 */
+
+#define SPI_CR1_SPE ((uint16_t)0x0040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint16_t)0x0080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint16_t)0x0100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint16_t)0x0200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint16_t)0x0400) /*!< Receive only */
+#define SPI_CR1_DFF ((uint16_t)0x0800) /*!< Data Frame Format */
+#define SPI_CR1_CRCNEXT ((uint16_t)0x1000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint16_t)0x2000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint16_t)0x4000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint16_t)0x8000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register ********************/
+#define SPI_CR2_RXDMAEN ((uint8_t)0x01) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint8_t)0x02) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint8_t)0x04) /*!< SS Output Enable */
+#define SPI_CR2_ERRIE ((uint8_t)0x20) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint8_t)0x40) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint8_t)0x80) /*!< Tx buffer Empty Interrupt Enable */
+
+/******************** Bit definition for SPI_SR register ********************/
+#define SPI_SR_RXNE ((uint8_t)0x01) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint8_t)0x02) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint8_t)0x04) /*!< Channel side */
+#define SPI_SR_UDR ((uint8_t)0x08) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint8_t)0x10) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint8_t)0x20) /*!< Mode fault */
+#define SPI_SR_OVR ((uint8_t)0x40) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint8_t)0x80) /*!< Busy flag */
+
+/******************** Bit definition for SPI_DR register ********************/
+#define SPI_DR_DR ((uint16_t)0xFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register ******************/
+#define SPI_CRCPR_CRCPOLY ((uint16_t)0xFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register ******************/
+#define SPI_RXCRCR_RXCRC ((uint16_t)0xFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register ******************/
+#define SPI_TXCRCR_TXCRC ((uint16_t)0xFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register *****************/
+#define SPI_I2SCFGR_CHLEN ((uint16_t)0x0001) /*!< Channel length (number of bits per audio channel) */
+
+#define SPI_I2SCFGR_DATLEN ((uint16_t)0x0006) /*!< DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint16_t)0x0002) /*!< Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint16_t)0x0004) /*!< Bit 1 */
+
+#define SPI_I2SCFGR_CKPOL ((uint16_t)0x0008) /*!< steady state clock polarity */
+
+#define SPI_I2SCFGR_I2SSTD ((uint16_t)0x0030) /*!< I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint16_t)0x0020) /*!< Bit 1 */
+
+#define SPI_I2SCFGR_PCMSYNC ((uint16_t)0x0080) /*!< PCM frame synchronization */
+
+#define SPI_I2SCFGR_I2SCFG ((uint16_t)0x0300) /*!< I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint16_t)0x0100) /*!< Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint16_t)0x0200) /*!< Bit 1 */
+
+#define SPI_I2SCFGR_I2SE ((uint16_t)0x0400) /*!< I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint16_t)0x0800) /*!< I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register *******************/
+#define SPI_I2SPR_I2SDIV ((uint16_t)0x00FF) /*!< I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint16_t)0x0100) /*!< Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint16_t)0x0200) /*!< Master Clock Output Enable */
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register ********************/
+#define I2C_CR1_PE ((uint16_t)0x0001) /*!< Peripheral Enable */
+#define I2C_CR1_SMBUS ((uint16_t)0x0002) /*!< SMBus Mode */
+#define I2C_CR1_SMBTYPE ((uint16_t)0x0008) /*!< SMBus Type */
+#define I2C_CR1_ENARP ((uint16_t)0x0010) /*!< ARP Enable */
+#define I2C_CR1_ENPEC ((uint16_t)0x0020) /*!< PEC Enable */
+#define I2C_CR1_ENGC ((uint16_t)0x0040) /*!< General Call Enable */
+#define I2C_CR1_NOSTRETCH ((uint16_t)0x0080) /*!< Clock Stretching Disable (Slave mode) */
+#define I2C_CR1_START ((uint16_t)0x0100) /*!< Start Generation */
+#define I2C_CR1_STOP ((uint16_t)0x0200) /*!< Stop Generation */
+#define I2C_CR1_ACK ((uint16_t)0x0400) /*!< Acknowledge Enable */
+#define I2C_CR1_POS ((uint16_t)0x0800) /*!< Acknowledge/PEC Position (for data reception) */
+#define I2C_CR1_PEC ((uint16_t)0x1000) /*!< Packet Error Checking */
+#define I2C_CR1_ALERT ((uint16_t)0x2000) /*!< SMBus Alert */
+#define I2C_CR1_SWRST ((uint16_t)0x8000) /*!< Software Reset */
+
+/******************* Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_FREQ ((uint16_t)0x003F) /*!< FREQ[5:0] bits (Peripheral Clock Frequency) */
+#define I2C_CR2_FREQ_0 ((uint16_t)0x0001) /*!< Bit 0 */
+#define I2C_CR2_FREQ_1 ((uint16_t)0x0002) /*!< Bit 1 */
+#define I2C_CR2_FREQ_2 ((uint16_t)0x0004) /*!< Bit 2 */
+#define I2C_CR2_FREQ_3 ((uint16_t)0x0008) /*!< Bit 3 */
+#define I2C_CR2_FREQ_4 ((uint16_t)0x0010) /*!< Bit 4 */
+#define I2C_CR2_FREQ_5 ((uint16_t)0x0020) /*!< Bit 5 */
+
+#define I2C_CR2_ITERREN ((uint16_t)0x0100) /*!< Error Interrupt Enable */
+#define I2C_CR2_ITEVTEN ((uint16_t)0x0200) /*!< Event Interrupt Enable */
+#define I2C_CR2_ITBUFEN ((uint16_t)0x0400) /*!< Buffer Interrupt Enable */
+#define I2C_CR2_DMAEN ((uint16_t)0x0800) /*!< DMA Requests Enable */
+#define I2C_CR2_LAST ((uint16_t)0x1000) /*!< DMA Last Transfer */
+
+/******************* Bit definition for I2C_OAR1 register *******************/
+#define I2C_OAR1_ADD1_7 ((uint16_t)0x00FE) /*!< Interface Address */
+#define I2C_OAR1_ADD8_9 ((uint16_t)0x0300) /*!< Interface Address */
+
+#define I2C_OAR1_ADD0 ((uint16_t)0x0001) /*!< Bit 0 */
+#define I2C_OAR1_ADD1 ((uint16_t)0x0002) /*!< Bit 1 */
+#define I2C_OAR1_ADD2 ((uint16_t)0x0004) /*!< Bit 2 */
+#define I2C_OAR1_ADD3 ((uint16_t)0x0008) /*!< Bit 3 */
+#define I2C_OAR1_ADD4 ((uint16_t)0x0010) /*!< Bit 4 */
+#define I2C_OAR1_ADD5 ((uint16_t)0x0020) /*!< Bit 5 */
+#define I2C_OAR1_ADD6 ((uint16_t)0x0040) /*!< Bit 6 */
+#define I2C_OAR1_ADD7 ((uint16_t)0x0080) /*!< Bit 7 */
+#define I2C_OAR1_ADD8 ((uint16_t)0x0100) /*!< Bit 8 */
+#define I2C_OAR1_ADD9 ((uint16_t)0x0200) /*!< Bit 9 */
+
+#define I2C_OAR1_ADDMODE ((uint16_t)0x8000) /*!< Addressing Mode (Slave mode) */
+
+/******************* Bit definition for I2C_OAR2 register *******************/
+#define I2C_OAR2_ENDUAL ((uint8_t)0x01) /*!< Dual addressing mode enable */
+#define I2C_OAR2_ADD2 ((uint8_t)0xFE) /*!< Interface address */
+
+/******************** Bit definition for I2C_DR register ********************/
+#define I2C_DR_DR ((uint8_t)0xFF) /*!< 8-bit Data Register */
+
+/******************* Bit definition for I2C_SR1 register ********************/
+#define I2C_SR1_SB ((uint16_t)0x0001) /*!< Start Bit (Master mode) */
+#define I2C_SR1_ADDR ((uint16_t)0x0002) /*!< Address sent (master mode)/matched (slave mode) */
+#define I2C_SR1_BTF ((uint16_t)0x0004) /*!< Byte Transfer Finished */
+#define I2C_SR1_ADD10 ((uint16_t)0x0008) /*!< 10-bit header sent (Master mode) */
+#define I2C_SR1_STOPF ((uint16_t)0x0010) /*!< Stop detection (Slave mode) */
+#define I2C_SR1_RXNE ((uint16_t)0x0040) /*!< Data Register not Empty (receivers) */
+#define I2C_SR1_TXE ((uint16_t)0x0080) /*!< Data Register Empty (transmitters) */
+#define I2C_SR1_BERR ((uint16_t)0x0100) /*!< Bus Error */
+#define I2C_SR1_ARLO ((uint16_t)0x0200) /*!< Arbitration Lost (master mode) */
+#define I2C_SR1_AF ((uint16_t)0x0400) /*!< Acknowledge Failure */
+#define I2C_SR1_OVR ((uint16_t)0x0800) /*!< Overrun/Underrun */
+#define I2C_SR1_PECERR ((uint16_t)0x1000) /*!< PEC Error in reception */
+#define I2C_SR1_TIMEOUT ((uint16_t)0x4000) /*!< Timeout or Tlow Error */
+#define I2C_SR1_SMBALERT ((uint16_t)0x8000) /*!< SMBus Alert */
+
+/******************* Bit definition for I2C_SR2 register ********************/
+#define I2C_SR2_MSL ((uint16_t)0x0001) /*!< Master/Slave */
+#define I2C_SR2_BUSY ((uint16_t)0x0002) /*!< Bus Busy */
+#define I2C_SR2_TRA ((uint16_t)0x0004) /*!< Transmitter/Receiver */
+#define I2C_SR2_GENCALL ((uint16_t)0x0010) /*!< General Call Address (Slave mode) */
+#define I2C_SR2_SMBDEFAULT ((uint16_t)0x0020) /*!< SMBus Device Default Address (Slave mode) */
+#define I2C_SR2_SMBHOST ((uint16_t)0x0040) /*!< SMBus Host Header (Slave mode) */
+#define I2C_SR2_DUALF ((uint16_t)0x0080) /*!< Dual Flag (Slave mode) */
+#define I2C_SR2_PEC ((uint16_t)0xFF00) /*!< Packet Error Checking Register */
+
+/******************* Bit definition for I2C_CCR register ********************/
+#define I2C_CCR_CCR ((uint16_t)0x0FFF) /*!< Clock Control Register in Fast/Standard mode (Master mode) */
+#define I2C_CCR_DUTY ((uint16_t)0x4000) /*!< Fast Mode Duty Cycle */
+#define I2C_CCR_FS ((uint16_t)0x8000) /*!< I2C Master Mode Selection */
+
+/****************** Bit definition for I2C_TRISE register *******************/
+#define I2C_TRISE_TRISE ((uint8_t)0x3F) /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for USART_SR register *******************/
+#define USART_SR_PE ((uint16_t)0x0001) /*!< Parity Error */
+#define USART_SR_FE ((uint16_t)0x0002) /*!< Framing Error */
+#define USART_SR_NE ((uint16_t)0x0004) /*!< Noise Error Flag */
+#define USART_SR_ORE ((uint16_t)0x0008) /*!< OverRun Error */
+#define USART_SR_IDLE ((uint16_t)0x0010) /*!< IDLE line detected */
+#define USART_SR_RXNE ((uint16_t)0x0020) /*!< Read Data Register Not Empty */
+#define USART_SR_TC ((uint16_t)0x0040) /*!< Transmission Complete */
+#define USART_SR_TXE ((uint16_t)0x0080) /*!< Transmit Data Register Empty */
+#define USART_SR_LBD ((uint16_t)0x0100) /*!< LIN Break Detection Flag */
+#define USART_SR_CTS ((uint16_t)0x0200) /*!< CTS Flag */
+
+/******************* Bit definition for USART_DR register *******************/
+#define USART_DR_DR ((uint16_t)0x01FF) /*!< Data value */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_Fraction ((uint16_t)0x000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_Mantissa ((uint16_t)0xFFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_SBK ((uint16_t)0x0001) /*!< Send Break */
+#define USART_CR1_RWU ((uint16_t)0x0002) /*!< Receiver wakeup */
+#define USART_CR1_RE ((uint16_t)0x0004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint16_t)0x0008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint16_t)0x0010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint16_t)0x0020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint16_t)0x0040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint16_t)0x0080) /*!< PE Interrupt Enable */
+#define USART_CR1_PEIE ((uint16_t)0x0100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint16_t)0x0200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint16_t)0x0400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint16_t)0x0800) /*!< Wakeup method */
+#define USART_CR1_M ((uint16_t)0x1000) /*!< Word length */
+#define USART_CR1_UE ((uint16_t)0x2000) /*!< USART Enable */
+#define USART_CR1_OVER8 ((uint16_t)0x8000) /*!< USART Oversmapling 8-bits */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADD ((uint16_t)0x000F) /*!< Address of the USART node */
+#define USART_CR2_LBDL ((uint16_t)0x0020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint16_t)0x0040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint16_t)0x0100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint16_t)0x0200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint16_t)0x0400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint16_t)0x0800) /*!< Clock Enable */
+
+#define USART_CR2_STOP ((uint16_t)0x3000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint16_t)0x1000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint16_t)0x2000) /*!< Bit 1 */
+
+#define USART_CR2_LINEN ((uint16_t)0x4000) /*!< LIN mode enable */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint16_t)0x0001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint16_t)0x0002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint16_t)0x0004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint16_t)0x0008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint16_t)0x0010) /*!< Smartcard NACK enable */
+#define USART_CR3_SCEN ((uint16_t)0x0020) /*!< Smartcard mode enable */
+#define USART_CR3_DMAR ((uint16_t)0x0040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint16_t)0x0080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint16_t)0x0100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint16_t)0x0200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint16_t)0x0400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint16_t)0x0800) /*!< One Bit method */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint16_t)0x00FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_PSC_0 ((uint16_t)0x0001) /*!< Bit 0 */
+#define USART_GTPR_PSC_1 ((uint16_t)0x0002) /*!< Bit 1 */
+#define USART_GTPR_PSC_2 ((uint16_t)0x0004) /*!< Bit 2 */
+#define USART_GTPR_PSC_3 ((uint16_t)0x0008) /*!< Bit 3 */
+#define USART_GTPR_PSC_4 ((uint16_t)0x0010) /*!< Bit 4 */
+#define USART_GTPR_PSC_5 ((uint16_t)0x0020) /*!< Bit 5 */
+#define USART_GTPR_PSC_6 ((uint16_t)0x0040) /*!< Bit 6 */
+#define USART_GTPR_PSC_7 ((uint16_t)0x0080) /*!< Bit 7 */
+
+#define USART_GTPR_GT ((uint16_t)0xFF00) /*!< Guard time value */
+
+/******************************************************************************/
+/* */
+/* Debug MCU */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001) /*!< Debug Sleep Mode */
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020) /*!< Trace Pin Assignment Control */
+
+#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0) /*!< TRACE_MODE[1:0] bits (Trace Pin Assignment Control) */
+#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+
+#define DBGMCU_CR_DBG_IWDG_STOP ((uint32_t)0x00000100) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_CR_DBG_WWDG_STOP ((uint32_t)0x00000200) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_CR_DBG_TIM1_STOP ((uint32_t)0x00000400) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_CR_DBG_TIM2_STOP ((uint32_t)0x00000800) /*!< TIM2 counter stopped when core is halted */
+#define DBGMCU_CR_DBG_TIM3_STOP ((uint32_t)0x00001000) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_CR_DBG_TIM4_STOP ((uint32_t)0x00002000) /*!< TIM4 counter stopped when core is halted */
+#define DBGMCU_CR_DBG_CAN1_STOP ((uint32_t)0x00004000) /*!< Debug CAN1 stopped when Core is halted */
+#define DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000) /*!< SMBUS timeout mode stopped when Core is halted */
+#define DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000) /*!< SMBUS timeout mode stopped when Core is halted */
+#define DBGMCU_CR_DBG_TIM8_STOP ((uint32_t)0x00020000) /*!< TIM8 counter stopped when core is halted */
+#define DBGMCU_CR_DBG_TIM5_STOP ((uint32_t)0x00040000) /*!< TIM5 counter stopped when core is halted */
+#define DBGMCU_CR_DBG_TIM6_STOP ((uint32_t)0x00080000) /*!< TIM6 counter stopped when core is halted */
+#define DBGMCU_CR_DBG_TIM7_STOP ((uint32_t)0x00100000) /*!< TIM7 counter stopped when core is halted */
+#define DBGMCU_CR_DBG_CAN2_STOP ((uint32_t)0x00200000) /*!< Debug CAN2 stopped when Core is halted */
+#define DBGMCU_CR_DBG_TIM15_STOP ((uint32_t)0x00400000) /*!< Debug TIM15 stopped when Core is halted */
+#define DBGMCU_CR_DBG_TIM16_STOP ((uint32_t)0x00800000) /*!< Debug TIM16 stopped when Core is halted */
+#define DBGMCU_CR_DBG_TIM17_STOP ((uint32_t)0x01000000) /*!< Debug TIM17 stopped when Core is halted */
+#define DBGMCU_CR_DBG_TIM12_STOP ((uint32_t)0x02000000) /*!< Debug TIM12 stopped when Core is halted */
+#define DBGMCU_CR_DBG_TIM13_STOP ((uint32_t)0x04000000) /*!< Debug TIM13 stopped when Core is halted */
+#define DBGMCU_CR_DBG_TIM14_STOP ((uint32_t)0x08000000) /*!< Debug TIM14 stopped when Core is halted */
+#define DBGMCU_CR_DBG_TIM9_STOP ((uint32_t)0x10000000) /*!< Debug TIM9 stopped when Core is halted */
+#define DBGMCU_CR_DBG_TIM10_STOP ((uint32_t)0x20000000) /*!< Debug TIM10 stopped when Core is halted */
+#define DBGMCU_CR_DBG_TIM11_STOP ((uint32_t)0x40000000) /*!< Debug TIM11 stopped when Core is halted */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint8_t)0x03) /*!< LATENCY[2:0] bits (Latency) */
+#define FLASH_ACR_LATENCY_0 ((uint8_t)0x00) /*!< Bit 0 */
+#define FLASH_ACR_LATENCY_1 ((uint8_t)0x01) /*!< Bit 0 */
+#define FLASH_ACR_LATENCY_2 ((uint8_t)0x02) /*!< Bit 1 */
+
+#define FLASH_ACR_HLFCYA ((uint8_t)0x08) /*!< Flash Half Cycle Access Enable */
+#define FLASH_ACR_PRFTBE ((uint8_t)0x10) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint8_t)0x20) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint8_t)0x01) /*!< Busy */
+#define FLASH_SR_PGERR ((uint8_t)0x04) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint8_t)0x10) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint8_t)0x20) /*!< End of operation */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint16_t)0x0001) /*!< Programming */
+#define FLASH_CR_PER ((uint16_t)0x0002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint16_t)0x0004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint16_t)0x0010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint16_t)0x0020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint16_t)0x0040) /*!< Start */
+#define FLASH_CR_LOCK ((uint16_t)0x0080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint16_t)0x0200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint16_t)0x0400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint16_t)0x1000) /*!< End of operation interrupt enable */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint16_t)0x0001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT ((uint16_t)0x0002) /*!< Read protection */
+
+#define FLASH_OBR_USER ((uint16_t)0x03FC) /*!< User Option Bytes */
+#define FLASH_OBR_WDG_SW ((uint16_t)0x0004) /*!< WDG_SW */
+#define FLASH_OBR_nRST_STOP ((uint16_t)0x0008) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint16_t)0x0010) /*!< nRST_STDBY */
+#define FLASH_OBR_BFB2 ((uint16_t)0x0020) /*!< BFB2 */
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for FLASH_RDP register *******************/
+#define FLASH_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define FLASH_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for FLASH_USER register ******************/
+#define FLASH_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define FLASH_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for FLASH_Data0 register *****************/
+#define FLASH_Data0_Data0 ((uint32_t)0x000000FF) /*!< User data storage option byte */
+#define FLASH_Data0_nData0 ((uint32_t)0x0000FF00) /*!< User data storage complemented option byte */
+
+/****************** Bit definition for FLASH_Data1 register *****************/
+#define FLASH_Data1_Data1 ((uint32_t)0x00FF0000) /*!< User data storage option byte */
+#define FLASH_Data1_nData1 ((uint32_t)0xFF000000) /*!< User data storage complemented option byte */
+
+/****************** Bit definition for FLASH_WRP0 register ******************/
+#define FLASH_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define FLASH_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for FLASH_WRP1 register ******************/
+#define FLASH_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define FLASH_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for FLASH_WRP2 register ******************/
+#define FLASH_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define FLASH_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for FLASH_WRP3 register ******************/
+#define FLASH_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define FLASH_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+#ifdef STM32F10X_CL
+/******************************************************************************/
+/* Ethernet MAC Registers bits definitions */
+/******************************************************************************/
+/* Bit definition for Ethernet MAC Control Register register */
+#define ETH_MACCR_WD ((uint32_t)0x00800000) /* Watchdog disable */
+#define ETH_MACCR_JD ((uint32_t)0x00400000) /* Jabber disable */
+#define ETH_MACCR_IFG ((uint32_t)0x000E0000) /* Inter-frame gap */
+ #define ETH_MACCR_IFG_96Bit ((uint32_t)0x00000000) /* Minimum IFG between frames during transmission is 96Bit */
+ #define ETH_MACCR_IFG_88Bit ((uint32_t)0x00020000) /* Minimum IFG between frames during transmission is 88Bit */
+ #define ETH_MACCR_IFG_80Bit ((uint32_t)0x00040000) /* Minimum IFG between frames during transmission is 80Bit */
+ #define ETH_MACCR_IFG_72Bit ((uint32_t)0x00060000) /* Minimum IFG between frames during transmission is 72Bit */
+ #define ETH_MACCR_IFG_64Bit ((uint32_t)0x00080000) /* Minimum IFG between frames during transmission is 64Bit */
+ #define ETH_MACCR_IFG_56Bit ((uint32_t)0x000A0000) /* Minimum IFG between frames during transmission is 56Bit */
+ #define ETH_MACCR_IFG_48Bit ((uint32_t)0x000C0000) /* Minimum IFG between frames during transmission is 48Bit */
+ #define ETH_MACCR_IFG_40Bit ((uint32_t)0x000E0000) /* Minimum IFG between frames during transmission is 40Bit */
+#define ETH_MACCR_CSD ((uint32_t)0x00010000) /* Carrier sense disable (during transmission) */
+#define ETH_MACCR_FES ((uint32_t)0x00004000) /* Fast ethernet speed */
+#define ETH_MACCR_ROD ((uint32_t)0x00002000) /* Receive own disable */
+#define ETH_MACCR_LM ((uint32_t)0x00001000) /* loopback mode */
+#define ETH_MACCR_DM ((uint32_t)0x00000800) /* Duplex mode */
+#define ETH_MACCR_IPCO ((uint32_t)0x00000400) /* IP Checksum offload */
+#define ETH_MACCR_RD ((uint32_t)0x00000200) /* Retry disable */
+#define ETH_MACCR_APCS ((uint32_t)0x00000080) /* Automatic Pad/CRC stripping */
+#define ETH_MACCR_BL ((uint32_t)0x00000060) /* Back-off limit: random integer number (r) of slot time delays before rescheduling
+ a transmission attempt during retries after a collision: 0 =< r <2^k */
+ #define ETH_MACCR_BL_10 ((uint32_t)0x00000000) /* k = min (n, 10) */
+ #define ETH_MACCR_BL_8 ((uint32_t)0x00000020) /* k = min (n, 8) */
+ #define ETH_MACCR_BL_4 ((uint32_t)0x00000040) /* k = min (n, 4) */
+ #define ETH_MACCR_BL_1 ((uint32_t)0x00000060) /* k = min (n, 1) */
+#define ETH_MACCR_DC ((uint32_t)0x00000010) /* Defferal check */
+#define ETH_MACCR_TE ((uint32_t)0x00000008) /* Transmitter enable */
+#define ETH_MACCR_RE ((uint32_t)0x00000004) /* Receiver enable */
+
+/* Bit definition for Ethernet MAC Frame Filter Register */
+#define ETH_MACFFR_RA ((uint32_t)0x80000000) /* Receive all */
+#define ETH_MACFFR_HPF ((uint32_t)0x00000400) /* Hash or perfect filter */
+#define ETH_MACFFR_SAF ((uint32_t)0x00000200) /* Source address filter enable */
+#define ETH_MACFFR_SAIF ((uint32_t)0x00000100) /* SA inverse filtering */
+#define ETH_MACFFR_PCF ((uint32_t)0x000000C0) /* Pass control frames: 3 cases */
+ #define ETH_MACFFR_PCF_BlockAll ((uint32_t)0x00000040) /* MAC filters all control frames from reaching the application */
+ #define ETH_MACFFR_PCF_ForwardAll ((uint32_t)0x00000080) /* MAC forwards all control frames to application even if they fail the Address Filter */
+ #define ETH_MACFFR_PCF_ForwardPassedAddrFilter ((uint32_t)0x000000C0) /* MAC forwards control frames that pass the Address Filter. */
+#define ETH_MACFFR_BFD ((uint32_t)0x00000020) /* Broadcast frame disable */
+#define ETH_MACFFR_PAM ((uint32_t)0x00000010) /* Pass all mutlicast */
+#define ETH_MACFFR_DAIF ((uint32_t)0x00000008) /* DA Inverse filtering */
+#define ETH_MACFFR_HM ((uint32_t)0x00000004) /* Hash multicast */
+#define ETH_MACFFR_HU ((uint32_t)0x00000002) /* Hash unicast */
+#define ETH_MACFFR_PM ((uint32_t)0x00000001) /* Promiscuous mode */
+
+/* Bit definition for Ethernet MAC Hash Table High Register */
+#define ETH_MACHTHR_HTH ((uint32_t)0xFFFFFFFF) /* Hash table high */
+
+/* Bit definition for Ethernet MAC Hash Table Low Register */
+#define ETH_MACHTLR_HTL ((uint32_t)0xFFFFFFFF) /* Hash table low */
+
+/* Bit definition for Ethernet MAC MII Address Register */
+#define ETH_MACMIIAR_PA ((uint32_t)0x0000F800) /* Physical layer address */
+#define ETH_MACMIIAR_MR ((uint32_t)0x000007C0) /* MII register in the selected PHY */
+#define ETH_MACMIIAR_CR ((uint32_t)0x0000001C) /* CR clock range: 6 cases */
+ #define ETH_MACMIIAR_CR_Div42 ((uint32_t)0x00000000) /* HCLK:60-72 MHz; MDC clock= HCLK/42 */
+ #define ETH_MACMIIAR_CR_Div16 ((uint32_t)0x00000008) /* HCLK:20-35 MHz; MDC clock= HCLK/16 */
+ #define ETH_MACMIIAR_CR_Div26 ((uint32_t)0x0000000C) /* HCLK:35-60 MHz; MDC clock= HCLK/26 */
+#define ETH_MACMIIAR_MW ((uint32_t)0x00000002) /* MII write */
+#define ETH_MACMIIAR_MB ((uint32_t)0x00000001) /* MII busy */
+
+/* Bit definition for Ethernet MAC MII Data Register */
+#define ETH_MACMIIDR_MD ((uint32_t)0x0000FFFF) /* MII data: read/write data from/to PHY */
+
+/* Bit definition for Ethernet MAC Flow Control Register */
+#define ETH_MACFCR_PT ((uint32_t)0xFFFF0000) /* Pause time */
+#define ETH_MACFCR_ZQPD ((uint32_t)0x00000080) /* Zero-quanta pause disable */
+#define ETH_MACFCR_PLT ((uint32_t)0x00000030) /* Pause low threshold: 4 cases */
+ #define ETH_MACFCR_PLT_Minus4 ((uint32_t)0x00000000) /* Pause time minus 4 slot times */
+ #define ETH_MACFCR_PLT_Minus28 ((uint32_t)0x00000010) /* Pause time minus 28 slot times */
+ #define ETH_MACFCR_PLT_Minus144 ((uint32_t)0x00000020) /* Pause time minus 144 slot times */
+ #define ETH_MACFCR_PLT_Minus256 ((uint32_t)0x00000030) /* Pause time minus 256 slot times */
+#define ETH_MACFCR_UPFD ((uint32_t)0x00000008) /* Unicast pause frame detect */
+#define ETH_MACFCR_RFCE ((uint32_t)0x00000004) /* Receive flow control enable */
+#define ETH_MACFCR_TFCE ((uint32_t)0x00000002) /* Transmit flow control enable */
+#define ETH_MACFCR_FCBBPA ((uint32_t)0x00000001) /* Flow control busy/backpressure activate */
+
+/* Bit definition for Ethernet MAC VLAN Tag Register */
+#define ETH_MACVLANTR_VLANTC ((uint32_t)0x00010000) /* 12-bit VLAN tag comparison */
+#define ETH_MACVLANTR_VLANTI ((uint32_t)0x0000FFFF) /* VLAN tag identifier (for receive frames) */
+
+/* Bit definition for Ethernet MAC Remote Wake-UpFrame Filter Register */
+#define ETH_MACRWUFFR_D ((uint32_t)0xFFFFFFFF) /* Wake-up frame filter register data */
+/* Eight sequential Writes to this address (offset 0x28) will write all Wake-UpFrame Filter Registers.
+ Eight sequential Reads from this address (offset 0x28) will read all Wake-UpFrame Filter Registers. */
+/* Wake-UpFrame Filter Reg0 : Filter 0 Byte Mask
+ Wake-UpFrame Filter Reg1 : Filter 1 Byte Mask
+ Wake-UpFrame Filter Reg2 : Filter 2 Byte Mask
+ Wake-UpFrame Filter Reg3 : Filter 3 Byte Mask
+ Wake-UpFrame Filter Reg4 : RSVD - Filter3 Command - RSVD - Filter2 Command -
+ RSVD - Filter1 Command - RSVD - Filter0 Command
+ Wake-UpFrame Filter Re5 : Filter3 Offset - Filter2 Offset - Filter1 Offset - Filter0 Offset
+ Wake-UpFrame Filter Re6 : Filter1 CRC16 - Filter0 CRC16
+ Wake-UpFrame Filter Re7 : Filter3 CRC16 - Filter2 CRC16 */
+
+/* Bit definition for Ethernet MAC PMT Control and Status Register */
+#define ETH_MACPMTCSR_WFFRPR ((uint32_t)0x80000000) /* Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_MACPMTCSR_GU ((uint32_t)0x00000200) /* Global Unicast */
+#define ETH_MACPMTCSR_WFR ((uint32_t)0x00000040) /* Wake-Up Frame Received */
+#define ETH_MACPMTCSR_MPR ((uint32_t)0x00000020) /* Magic Packet Received */
+#define ETH_MACPMTCSR_WFE ((uint32_t)0x00000004) /* Wake-Up Frame Enable */
+#define ETH_MACPMTCSR_MPE ((uint32_t)0x00000002) /* Magic Packet Enable */
+#define ETH_MACPMTCSR_PD ((uint32_t)0x00000001) /* Power Down */
+
+/* Bit definition for Ethernet MAC Status Register */
+#define ETH_MACSR_TSTS ((uint32_t)0x00000200) /* Time stamp trigger status */
+#define ETH_MACSR_MMCTS ((uint32_t)0x00000040) /* MMC transmit status */
+#define ETH_MACSR_MMMCRS ((uint32_t)0x00000020) /* MMC receive status */
+#define ETH_MACSR_MMCS ((uint32_t)0x00000010) /* MMC status */
+#define ETH_MACSR_PMTS ((uint32_t)0x00000008) /* PMT status */
+
+/* Bit definition for Ethernet MAC Interrupt Mask Register */
+#define ETH_MACIMR_TSTIM ((uint32_t)0x00000200) /* Time stamp trigger interrupt mask */
+#define ETH_MACIMR_PMTIM ((uint32_t)0x00000008) /* PMT interrupt mask */
+
+/* Bit definition for Ethernet MAC Address0 High Register */
+#define ETH_MACA0HR_MACA0H ((uint32_t)0x0000FFFF) /* MAC address0 high */
+
+/* Bit definition for Ethernet MAC Address0 Low Register */
+#define ETH_MACA0LR_MACA0L ((uint32_t)0xFFFFFFFF) /* MAC address0 low */
+
+/* Bit definition for Ethernet MAC Address1 High Register */
+#define ETH_MACA1HR_AE ((uint32_t)0x80000000) /* Address enable */
+#define ETH_MACA1HR_SA ((uint32_t)0x40000000) /* Source address */
+#define ETH_MACA1HR_MBC ((uint32_t)0x3F000000) /* Mask byte control: bits to mask for comparison of the MAC Address bytes */
+ #define ETH_MACA1HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */
+ #define ETH_MACA1HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */
+ #define ETH_MACA1HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */
+ #define ETH_MACA1HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */
+ #define ETH_MACA1HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */
+ #define ETH_MACA1HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [7:0] */
+#define ETH_MACA1HR_MACA1H ((uint32_t)0x0000FFFF) /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address1 Low Register */
+#define ETH_MACA1LR_MACA1L ((uint32_t)0xFFFFFFFF) /* MAC address1 low */
+
+/* Bit definition for Ethernet MAC Address2 High Register */
+#define ETH_MACA2HR_AE ((uint32_t)0x80000000) /* Address enable */
+#define ETH_MACA2HR_SA ((uint32_t)0x40000000) /* Source address */
+#define ETH_MACA2HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */
+ #define ETH_MACA2HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */
+ #define ETH_MACA2HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */
+ #define ETH_MACA2HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */
+ #define ETH_MACA2HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */
+ #define ETH_MACA2HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */
+ #define ETH_MACA2HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA2HR_MACA2H ((uint32_t)0x0000FFFF) /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address2 Low Register */
+#define ETH_MACA2LR_MACA2L ((uint32_t)0xFFFFFFFF) /* MAC address2 low */
+
+/* Bit definition for Ethernet MAC Address3 High Register */
+#define ETH_MACA3HR_AE ((uint32_t)0x80000000) /* Address enable */
+#define ETH_MACA3HR_SA ((uint32_t)0x40000000) /* Source address */
+#define ETH_MACA3HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */
+ #define ETH_MACA3HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */
+ #define ETH_MACA3HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */
+ #define ETH_MACA3HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */
+ #define ETH_MACA3HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */
+ #define ETH_MACA3HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */
+ #define ETH_MACA3HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA3HR_MACA3H ((uint32_t)0x0000FFFF) /* MAC address3 high */
+
+/* Bit definition for Ethernet MAC Address3 Low Register */
+#define ETH_MACA3LR_MACA3L ((uint32_t)0xFFFFFFFF) /* MAC address3 low */
+
+/******************************************************************************/
+/* Ethernet MMC Registers bits definition */
+/******************************************************************************/
+
+/* Bit definition for Ethernet MMC Contol Register */
+#define ETH_MMCCR_MCF ((uint32_t)0x00000008) /* MMC Counter Freeze */
+#define ETH_MMCCR_ROR ((uint32_t)0x00000004) /* Reset on Read */
+#define ETH_MMCCR_CSR ((uint32_t)0x00000002) /* Counter Stop Rollover */
+#define ETH_MMCCR_CR ((uint32_t)0x00000001) /* Counters Reset */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Register */
+#define ETH_MMCRIR_RGUFS ((uint32_t)0x00020000) /* Set when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIR_RFAES ((uint32_t)0x00000040) /* Set when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIR_RFCES ((uint32_t)0x00000020) /* Set when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Register */
+#define ETH_MMCTIR_TGFS ((uint32_t)0x00200000) /* Set when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFMSCS ((uint32_t)0x00008000) /* Set when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFSCS ((uint32_t)0x00004000) /* Set when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Mask Register */
+#define ETH_MMCRIMR_RGUFM ((uint32_t)0x00020000) /* Mask the interrupt when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFAEM ((uint32_t)0x00000040) /* Mask the interrupt when when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFCEM ((uint32_t)0x00000020) /* Mask the interrupt when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Mask Register */
+#define ETH_MMCTIMR_TGFM ((uint32_t)0x00200000) /* Mask the interrupt when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFMSCM ((uint32_t)0x00008000) /* Mask the interrupt when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFSCM ((uint32_t)0x00004000) /* Mask the interrupt when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after Single Collision Counter Register */
+#define ETH_MMCTGFSCCR_TGFSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after More than a Single Collision Counter Register */
+#define ETH_MMCTGFMSCCR_TGFMSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after more than a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames Counter Register */
+#define ETH_MMCTGFCR_TGFC ((uint32_t)0xFFFFFFFF) /* Number of good frames transmitted. */
+
+/* Bit definition for Ethernet MMC Received Frames with CRC Error Counter Register */
+#define ETH_MMCRFCECR_RFCEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with CRC error. */
+
+/* Bit definition for Ethernet MMC Received Frames with Alignement Error Counter Register */
+#define ETH_MMCRFAECR_RFAEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with alignment (dribble) error */
+
+/* Bit definition for Ethernet MMC Received Good Unicast Frames Counter Register */
+#define ETH_MMCRGUFCR_RGUFC ((uint32_t)0xFFFFFFFF) /* Number of good unicast frames received. */
+
+/******************************************************************************/
+/* Ethernet PTP Registers bits definition */
+/******************************************************************************/
+
+/* Bit definition for Ethernet PTP Time Stamp Contol Register */
+#define ETH_PTPTSCR_TSARU ((uint32_t)0x00000020) /* Addend register update */
+#define ETH_PTPTSCR_TSITE ((uint32_t)0x00000010) /* Time stamp interrupt trigger enable */
+#define ETH_PTPTSCR_TSSTU ((uint32_t)0x00000008) /* Time stamp update */
+#define ETH_PTPTSCR_TSSTI ((uint32_t)0x00000004) /* Time stamp initialize */
+#define ETH_PTPTSCR_TSFCU ((uint32_t)0x00000002) /* Time stamp fine or coarse update */
+#define ETH_PTPTSCR_TSE ((uint32_t)0x00000001) /* Time stamp enable */
+
+/* Bit definition for Ethernet PTP Sub-Second Increment Register */
+#define ETH_PTPSSIR_STSSI ((uint32_t)0x000000FF) /* System time Sub-second increment value */
+
+/* Bit definition for Ethernet PTP Time Stamp High Register */
+#define ETH_PTPTSHR_STS ((uint32_t)0xFFFFFFFF) /* System Time second */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Register */
+#define ETH_PTPTSLR_STPNS ((uint32_t)0x80000000) /* System Time Positive or negative time */
+#define ETH_PTPTSLR_STSS ((uint32_t)0x7FFFFFFF) /* System Time sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp High Update Register */
+#define ETH_PTPTSHUR_TSUS ((uint32_t)0xFFFFFFFF) /* Time stamp update seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Update Register */
+#define ETH_PTPTSLUR_TSUPNS ((uint32_t)0x80000000) /* Time stamp update Positive or negative time */
+#define ETH_PTPTSLUR_TSUSS ((uint32_t)0x7FFFFFFF) /* Time stamp update sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Addend Register */
+#define ETH_PTPTSAR_TSA ((uint32_t)0xFFFFFFFF) /* Time stamp addend */
+
+/* Bit definition for Ethernet PTP Target Time High Register */
+#define ETH_PTPTTHR_TTSH ((uint32_t)0xFFFFFFFF) /* Target time stamp high */
+
+/* Bit definition for Ethernet PTP Target Time Low Register */
+#define ETH_PTPTTLR_TTSL ((uint32_t)0xFFFFFFFF) /* Target time stamp low */
+
+/******************************************************************************/
+/* Ethernet DMA Registers bits definition */
+/******************************************************************************/
+
+/* Bit definition for Ethernet DMA Bus Mode Register */
+#define ETH_DMABMR_AAB ((uint32_t)0x02000000) /* Address-Aligned beats */
+#define ETH_DMABMR_FPM ((uint32_t)0x01000000) /* 4xPBL mode */
+#define ETH_DMABMR_USP ((uint32_t)0x00800000) /* Use separate PBL */
+#define ETH_DMABMR_RDP ((uint32_t)0x007E0000) /* RxDMA PBL */
+ #define ETH_DMABMR_RDP_1Beat ((uint32_t)0x00020000) /* maximum number of beats to be transferred in one RxDMA transaction is 1 */
+ #define ETH_DMABMR_RDP_2Beat ((uint32_t)0x00040000) /* maximum number of beats to be transferred in one RxDMA transaction is 2 */
+ #define ETH_DMABMR_RDP_4Beat ((uint32_t)0x00080000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+ #define ETH_DMABMR_RDP_8Beat ((uint32_t)0x00100000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+ #define ETH_DMABMR_RDP_16Beat ((uint32_t)0x00200000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+ #define ETH_DMABMR_RDP_32Beat ((uint32_t)0x00400000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */
+ #define ETH_DMABMR_RDP_4xPBL_4Beat ((uint32_t)0x01020000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+ #define ETH_DMABMR_RDP_4xPBL_8Beat ((uint32_t)0x01040000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+ #define ETH_DMABMR_RDP_4xPBL_16Beat ((uint32_t)0x01080000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+ #define ETH_DMABMR_RDP_4xPBL_32Beat ((uint32_t)0x01100000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */
+ #define ETH_DMABMR_RDP_4xPBL_64Beat ((uint32_t)0x01200000) /* maximum number of beats to be transferred in one RxDMA transaction is 64 */
+ #define ETH_DMABMR_RDP_4xPBL_128Beat ((uint32_t)0x01400000) /* maximum number of beats to be transferred in one RxDMA transaction is 128 */
+#define ETH_DMABMR_FB ((uint32_t)0x00010000) /* Fixed Burst */
+#define ETH_DMABMR_RTPR ((uint32_t)0x0000C000) /* Rx Tx priority ratio */
+ #define ETH_DMABMR_RTPR_1_1 ((uint32_t)0x00000000) /* Rx Tx priority ratio */
+ #define ETH_DMABMR_RTPR_2_1 ((uint32_t)0x00004000) /* Rx Tx priority ratio */
+ #define ETH_DMABMR_RTPR_3_1 ((uint32_t)0x00008000) /* Rx Tx priority ratio */
+ #define ETH_DMABMR_RTPR_4_1 ((uint32_t)0x0000C000) /* Rx Tx priority ratio */
+#define ETH_DMABMR_PBL ((uint32_t)0x00003F00) /* Programmable burst length */
+ #define ETH_DMABMR_PBL_1Beat ((uint32_t)0x00000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+ #define ETH_DMABMR_PBL_2Beat ((uint32_t)0x00000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+ #define ETH_DMABMR_PBL_4Beat ((uint32_t)0x00000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+ #define ETH_DMABMR_PBL_8Beat ((uint32_t)0x00000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+ #define ETH_DMABMR_PBL_16Beat ((uint32_t)0x00001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+ #define ETH_DMABMR_PBL_32Beat ((uint32_t)0x00002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+ #define ETH_DMABMR_PBL_4xPBL_4Beat ((uint32_t)0x01000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+ #define ETH_DMABMR_PBL_4xPBL_8Beat ((uint32_t)0x01000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+ #define ETH_DMABMR_PBL_4xPBL_16Beat ((uint32_t)0x01000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+ #define ETH_DMABMR_PBL_4xPBL_32Beat ((uint32_t)0x01000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+ #define ETH_DMABMR_PBL_4xPBL_64Beat ((uint32_t)0x01001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+ #define ETH_DMABMR_PBL_4xPBL_128Beat ((uint32_t)0x01002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+#define ETH_DMABMR_DSL ((uint32_t)0x0000007C) /* Descriptor Skip Length */
+#define ETH_DMABMR_DA ((uint32_t)0x00000002) /* DMA arbitration scheme */
+#define ETH_DMABMR_SR ((uint32_t)0x00000001) /* Software reset */
+
+/* Bit definition for Ethernet DMA Transmit Poll Demand Register */
+#define ETH_DMATPDR_TPD ((uint32_t)0xFFFFFFFF) /* Transmit poll demand */
+
+/* Bit definition for Ethernet DMA Receive Poll Demand Register */
+#define ETH_DMARPDR_RPD ((uint32_t)0xFFFFFFFF) /* Receive poll demand */
+
+/* Bit definition for Ethernet DMA Receive Descriptor List Address Register */
+#define ETH_DMARDLAR_SRL ((uint32_t)0xFFFFFFFF) /* Start of receive list */
+
+/* Bit definition for Ethernet DMA Transmit Descriptor List Address Register */
+#define ETH_DMATDLAR_STL ((uint32_t)0xFFFFFFFF) /* Start of transmit list */
+
+/* Bit definition for Ethernet DMA Status Register */
+#define ETH_DMASR_TSTS ((uint32_t)0x20000000) /* Time-stamp trigger status */
+#define ETH_DMASR_PMTS ((uint32_t)0x10000000) /* PMT status */
+#define ETH_DMASR_MMCS ((uint32_t)0x08000000) /* MMC status */
+#define ETH_DMASR_EBS ((uint32_t)0x03800000) /* Error bits status */
+ /* combination with EBS[2:0] for GetFlagStatus function */
+ #define ETH_DMASR_EBS_DescAccess ((uint32_t)0x02000000) /* Error bits 0-data buffer, 1-desc. access */
+ #define ETH_DMASR_EBS_ReadTransf ((uint32_t)0x01000000) /* Error bits 0-write trnsf, 1-read transfr */
+ #define ETH_DMASR_EBS_DataTransfTx ((uint32_t)0x00800000) /* Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMASR_TPS ((uint32_t)0x00700000) /* Transmit process state */
+ #define ETH_DMASR_TPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Tx Command issued */
+ #define ETH_DMASR_TPS_Fetching ((uint32_t)0x00100000) /* Running - fetching the Tx descriptor */
+ #define ETH_DMASR_TPS_Waiting ((uint32_t)0x00200000) /* Running - waiting for status */
+ #define ETH_DMASR_TPS_Reading ((uint32_t)0x00300000) /* Running - reading the data from host memory */
+ #define ETH_DMASR_TPS_Suspended ((uint32_t)0x00600000) /* Suspended - Tx Descriptor unavailabe */
+ #define ETH_DMASR_TPS_Closing ((uint32_t)0x00700000) /* Running - closing Rx descriptor */
+#define ETH_DMASR_RPS ((uint32_t)0x000E0000) /* Receive process state */
+ #define ETH_DMASR_RPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Rx Command issued */
+ #define ETH_DMASR_RPS_Fetching ((uint32_t)0x00020000) /* Running - fetching the Rx descriptor */
+ #define ETH_DMASR_RPS_Waiting ((uint32_t)0x00060000) /* Running - waiting for packet */
+ #define ETH_DMASR_RPS_Suspended ((uint32_t)0x00080000) /* Suspended - Rx Descriptor unavailable */
+ #define ETH_DMASR_RPS_Closing ((uint32_t)0x000A0000) /* Running - closing descriptor */
+ #define ETH_DMASR_RPS_Queuing ((uint32_t)0x000E0000) /* Running - queuing the recieve frame into host memory */
+#define ETH_DMASR_NIS ((uint32_t)0x00010000) /* Normal interrupt summary */
+#define ETH_DMASR_AIS ((uint32_t)0x00008000) /* Abnormal interrupt summary */
+#define ETH_DMASR_ERS ((uint32_t)0x00004000) /* Early receive status */
+#define ETH_DMASR_FBES ((uint32_t)0x00002000) /* Fatal bus error status */
+#define ETH_DMASR_ETS ((uint32_t)0x00000400) /* Early transmit status */
+#define ETH_DMASR_RWTS ((uint32_t)0x00000200) /* Receive watchdog timeout status */
+#define ETH_DMASR_RPSS ((uint32_t)0x00000100) /* Receive process stopped status */
+#define ETH_DMASR_RBUS ((uint32_t)0x00000080) /* Receive buffer unavailable status */
+#define ETH_DMASR_RS ((uint32_t)0x00000040) /* Receive status */
+#define ETH_DMASR_TUS ((uint32_t)0x00000020) /* Transmit underflow status */
+#define ETH_DMASR_ROS ((uint32_t)0x00000010) /* Receive overflow status */
+#define ETH_DMASR_TJTS ((uint32_t)0x00000008) /* Transmit jabber timeout status */
+#define ETH_DMASR_TBUS ((uint32_t)0x00000004) /* Transmit buffer unavailable status */
+#define ETH_DMASR_TPSS ((uint32_t)0x00000002) /* Transmit process stopped status */
+#define ETH_DMASR_TS ((uint32_t)0x00000001) /* Transmit status */
+
+/* Bit definition for Ethernet DMA Operation Mode Register */
+#define ETH_DMAOMR_DTCEFD ((uint32_t)0x04000000) /* Disable Dropping of TCP/IP checksum error frames */
+#define ETH_DMAOMR_RSF ((uint32_t)0x02000000) /* Receive store and forward */
+#define ETH_DMAOMR_DFRF ((uint32_t)0x01000000) /* Disable flushing of received frames */
+#define ETH_DMAOMR_TSF ((uint32_t)0x00200000) /* Transmit store and forward */
+#define ETH_DMAOMR_FTF ((uint32_t)0x00100000) /* Flush transmit FIFO */
+#define ETH_DMAOMR_TTC ((uint32_t)0x0001C000) /* Transmit threshold control */
+ #define ETH_DMAOMR_TTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Transmit FIFO is 64 Bytes */
+ #define ETH_DMAOMR_TTC_128Bytes ((uint32_t)0x00004000) /* threshold level of the MTL Transmit FIFO is 128 Bytes */
+ #define ETH_DMAOMR_TTC_192Bytes ((uint32_t)0x00008000) /* threshold level of the MTL Transmit FIFO is 192 Bytes */
+ #define ETH_DMAOMR_TTC_256Bytes ((uint32_t)0x0000C000) /* threshold level of the MTL Transmit FIFO is 256 Bytes */
+ #define ETH_DMAOMR_TTC_40Bytes ((uint32_t)0x00010000) /* threshold level of the MTL Transmit FIFO is 40 Bytes */
+ #define ETH_DMAOMR_TTC_32Bytes ((uint32_t)0x00014000) /* threshold level of the MTL Transmit FIFO is 32 Bytes */
+ #define ETH_DMAOMR_TTC_24Bytes ((uint32_t)0x00018000) /* threshold level of the MTL Transmit FIFO is 24 Bytes */
+ #define ETH_DMAOMR_TTC_16Bytes ((uint32_t)0x0001C000) /* threshold level of the MTL Transmit FIFO is 16 Bytes */
+#define ETH_DMAOMR_ST ((uint32_t)0x00002000) /* Start/stop transmission command */
+#define ETH_DMAOMR_FEF ((uint32_t)0x00000080) /* Forward error frames */
+#define ETH_DMAOMR_FUGF ((uint32_t)0x00000040) /* Forward undersized good frames */
+#define ETH_DMAOMR_RTC ((uint32_t)0x00000018) /* receive threshold control */
+ #define ETH_DMAOMR_RTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Receive FIFO is 64 Bytes */
+ #define ETH_DMAOMR_RTC_32Bytes ((uint32_t)0x00000008) /* threshold level of the MTL Receive FIFO is 32 Bytes */
+ #define ETH_DMAOMR_RTC_96Bytes ((uint32_t)0x00000010) /* threshold level of the MTL Receive FIFO is 96 Bytes */
+ #define ETH_DMAOMR_RTC_128Bytes ((uint32_t)0x00000018) /* threshold level of the MTL Receive FIFO is 128 Bytes */
+#define ETH_DMAOMR_OSF ((uint32_t)0x00000004) /* operate on second frame */
+#define ETH_DMAOMR_SR ((uint32_t)0x00000002) /* Start/stop receive */
+
+/* Bit definition for Ethernet DMA Interrupt Enable Register */
+#define ETH_DMAIER_NISE ((uint32_t)0x00010000) /* Normal interrupt summary enable */
+#define ETH_DMAIER_AISE ((uint32_t)0x00008000) /* Abnormal interrupt summary enable */
+#define ETH_DMAIER_ERIE ((uint32_t)0x00004000) /* Early receive interrupt enable */
+#define ETH_DMAIER_FBEIE ((uint32_t)0x00002000) /* Fatal bus error interrupt enable */
+#define ETH_DMAIER_ETIE ((uint32_t)0x00000400) /* Early transmit interrupt enable */
+#define ETH_DMAIER_RWTIE ((uint32_t)0x00000200) /* Receive watchdog timeout interrupt enable */
+#define ETH_DMAIER_RPSIE ((uint32_t)0x00000100) /* Receive process stopped interrupt enable */
+#define ETH_DMAIER_RBUIE ((uint32_t)0x00000080) /* Receive buffer unavailable interrupt enable */
+#define ETH_DMAIER_RIE ((uint32_t)0x00000040) /* Receive interrupt enable */
+#define ETH_DMAIER_TUIE ((uint32_t)0x00000020) /* Transmit Underflow interrupt enable */
+#define ETH_DMAIER_ROIE ((uint32_t)0x00000010) /* Receive Overflow interrupt enable */
+#define ETH_DMAIER_TJTIE ((uint32_t)0x00000008) /* Transmit jabber timeout interrupt enable */
+#define ETH_DMAIER_TBUIE ((uint32_t)0x00000004) /* Transmit buffer unavailable interrupt enable */
+#define ETH_DMAIER_TPSIE ((uint32_t)0x00000002) /* Transmit process stopped interrupt enable */
+#define ETH_DMAIER_TIE ((uint32_t)0x00000001) /* Transmit interrupt enable */
+
+/* Bit definition for Ethernet DMA Missed Frame and Buffer Overflow Counter Register */
+#define ETH_DMAMFBOCR_OFOC ((uint32_t)0x10000000) /* Overflow bit for FIFO overflow counter */
+#define ETH_DMAMFBOCR_MFA ((uint32_t)0x0FFE0000) /* Number of frames missed by the application */
+#define ETH_DMAMFBOCR_OMFC ((uint32_t)0x00010000) /* Overflow bit for missed frame counter */
+#define ETH_DMAMFBOCR_MFC ((uint32_t)0x0000FFFF) /* Number of frames missed by the controller */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Descriptor Register */
+#define ETH_DMACHTDR_HTDAP ((uint32_t)0xFFFFFFFF) /* Host transmit descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Descriptor Register */
+#define ETH_DMACHRDR_HRDAP ((uint32_t)0xFFFFFFFF) /* Host receive descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Buffer Address Register */
+#define ETH_DMACHTBAR_HTBAP ((uint32_t)0xFFFFFFFF) /* Host transmit buffer address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Buffer Address Register */
+#define ETH_DMACHRBAR_HRBAP ((uint32_t)0xFFFFFFFF) /* Host receive buffer address pointer */
+#endif /* STM32F10X_CL */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+#ifdef USE_STDPERIPH_DRIVER
+ #include "stm32f10x_conf.h"
+#endif
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c
new file mode 100644
index 0000000..6fb4579
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.c
@@ -0,0 +1,1094 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f10x.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+ *
+ * 1. This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+ * factors, AHB/APBx prescalers and Flash settings).
+ * This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f10x_xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+ * Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
+ * configure the system clock before to branch to main program.
+ *
+ * 3. If the system clock source selected by user fails to startup, the SystemInit()
+ * function will do nothing and HSI still used as system clock source. User can
+ * add some code to deal with this issue inside the SetSysClock() function.
+ *
+ * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
+ * the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file.
+ * When HSE is used as system clock source, directly or through PLL, and you
+ * are using different crystal you have to adapt the HSE value to your own
+ * configuration.
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f10x_system
+ * @{
+ */
+
+/** @addtogroup STM32F10x_System_Private_Includes
+ * @{
+ */
+
+#include "stm32f10x.h"
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Private_Defines
+ * @{
+ */
+
+/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
+ frequency (after reset the HSI is used as SYSCLK source)
+
+ IMPORTANT NOTE:
+ ==============
+ 1. After each device reset the HSI is used as System clock source.
+
+ 2. Please make sure that the selected System clock doesn't exceed your device's
+ maximum frequency.
+
+ 3. If none of the define below is enabled, the HSI is used as System clock
+ source.
+
+ 4. The System clock configuration functions provided within this file assume that:
+ - For Low, Medium and High density Value line devices an external 8MHz
+ crystal is used to drive the System clock.
+ - For Low, Medium and High density devices an external 8MHz crystal is
+ used to drive the System clock.
+ - For Connectivity line devices an external 25MHz crystal is used to drive
+ the System clock.
+ If you are using different crystal you have to adapt those functions accordingly.
+ */
+
+#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+/* #define SYSCLK_FREQ_HSE HSE_VALUE */
+ #define SYSCLK_FREQ_24MHz 24000000
+#else
+/* #define SYSCLK_FREQ_HSE HSE_VALUE */
+/* #define SYSCLK_FREQ_24MHz 24000000 */
+/* #define SYSCLK_FREQ_36MHz 36000000 */
+/* #define SYSCLK_FREQ_48MHz 48000000 */
+/* #define SYSCLK_FREQ_56MHz 56000000 */
+#define SYSCLK_FREQ_72MHz 72000000
+#endif
+
+/*!< Uncomment the following line if you need to use external SRAM mounted
+ on STM3210E-EVAL board (STM32 High density and XL-density devices) or on
+ STM32100E-EVAL board (STM32 High-density value line devices) as data memory */
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+/* #define DATA_IN_ExtSRAM */
+#endif
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Private_Variables
+ * @{
+ */
+
+/*******************************************************************************
+* Clock Definitions
+*******************************************************************************/
+#ifdef SYSCLK_FREQ_HSE
+ uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_24MHz
+ uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_36MHz
+ uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_48MHz
+ uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_56MHz
+ uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_72MHz
+ uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */
+#else /*!< HSI Selected as System Clock source */
+ uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */
+#endif
+
+__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
+ * @{
+ */
+
+static void SetSysClock(void);
+
+#ifdef SYSCLK_FREQ_HSE
+ static void SetSysClockToHSE(void);
+#elif defined SYSCLK_FREQ_24MHz
+ static void SetSysClockTo24(void);
+#elif defined SYSCLK_FREQ_36MHz
+ static void SetSysClockTo36(void);
+#elif defined SYSCLK_FREQ_48MHz
+ static void SetSysClockTo48(void);
+#elif defined SYSCLK_FREQ_56MHz
+ static void SetSysClockTo56(void);
+#elif defined SYSCLK_FREQ_72MHz
+ static void SetSysClockTo72(void);
+#endif
+
+#ifdef DATA_IN_ExtSRAM
+ static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the Embedded Flash Interface, the PLL and update the
+ * SystemCoreClock variable.
+ * @note This function should be used only after reset.
+ * @param None
+ * @retval None
+ */
+void SystemInit (void)
+{
+ /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#ifndef STM32F10X_CL
+ RCC->CFGR &= (uint32_t)0xF8FF0000;
+#else
+ RCC->CFGR &= (uint32_t)0xF0FF0000;
+#endif /* STM32F10X_CL */
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+ RCC->CFGR &= (uint32_t)0xFF80FFFF;
+
+#ifdef STM32F10X_CL
+ /* Reset PLL2ON and PLL3ON bits */
+ RCC->CR &= (uint32_t)0xEBFFFFFF;
+
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x00FF0000;
+
+ /* Reset CFGR2 register */
+ RCC->CFGR2 = 0x00000000;
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x009F0000;
+
+ /* Reset CFGR2 register */
+ RCC->CFGR2 = 0x00000000;
+#else
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x009F0000;
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+ #ifdef DATA_IN_ExtSRAM
+ SystemInit_ExtMemCtl();
+ #endif /* DATA_IN_ExtSRAM */
+#endif
+
+ /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
+ /* Configure the Flash Latency cycles and enable prefetch buffer */
+ SetSysClock();
+
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+#endif
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
+ * 8 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
+ * 8 MHz or 25 MHz, depedning on the product used), user has to ensure
+ * that HSE_VALUE is same as the real frequency of the crystal used.
+ * Otherwise, this function may have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate (void)
+{
+ uint32_t tmp = 0, pllmull = 0, pllsource = 0;
+
+#ifdef STM32F10X_CL
+ uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+ uint32_t prediv1factor = 0;
+#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00: /* HSI used as system clock */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case 0x04: /* HSE used as system clock */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case 0x08: /* PLL used as system clock */
+
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
+ pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+
+#ifndef STM32F10X_CL
+ pllmull = ( pllmull >> 18) + 2;
+
+ if (pllsource == 0x00)
+ {
+ /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+ SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+ }
+ else
+ {
+ #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+ prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+ /* HSE oscillator clock selected as PREDIV1 clock entry */
+ SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
+ #else
+ /* HSE selected as PLL clock entry */
+ if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
+ {/* HSE oscillator clock divided by 2 */
+ SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
+ }
+ else
+ {
+ SystemCoreClock = HSE_VALUE * pllmull;
+ }
+ #endif
+ }
+#else
+ pllmull = pllmull >> 18;
+
+ if (pllmull != 0x0D)
+ {
+ pllmull += 2;
+ }
+ else
+ { /* PLL multiplication factor = PLL input clock * 6.5 */
+ pllmull = 13 / 2;
+ }
+
+ if (pllsource == 0x00)
+ {
+ /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+ SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+ }
+ else
+ {/* PREDIV1 selected as PLL clock entry */
+
+ /* Get PREDIV1 clock source and division factor */
+ prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
+ prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+
+ if (prediv1source == 0)
+ {
+ /* HSE oscillator clock selected as PREDIV1 clock entry */
+ SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
+ }
+ else
+ {/* PLL2 clock selected as PREDIV1 clock entry */
+
+ /* Get PREDIV2 division factor and PLL2 multiplication factor */
+ prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
+ pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2;
+ SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;
+ }
+ }
+#endif /* STM32F10X_CL */
+ break;
+
+ default:
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+
+ /* Compute HCLK clock frequency ----------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
+ * @param None
+ * @retval None
+ */
+static void SetSysClock(void)
+{
+#ifdef SYSCLK_FREQ_HSE
+ SetSysClockToHSE();
+#elif defined SYSCLK_FREQ_24MHz
+ SetSysClockTo24();
+#elif defined SYSCLK_FREQ_36MHz
+ SetSysClockTo36();
+#elif defined SYSCLK_FREQ_48MHz
+ SetSysClockTo48();
+#elif defined SYSCLK_FREQ_56MHz
+ SetSysClockTo56();
+#elif defined SYSCLK_FREQ_72MHz
+ SetSysClockTo72();
+#endif
+
+ /* If none of the define above is enabled, the HSI is used as System clock
+ source (default after reset) */
+}
+
+/**
+ * @brief Setup the external memory controller. Called in startup_stm32f10x.s
+ * before jump to __main
+ * @param None
+ * @retval None
+ */
+#ifdef DATA_IN_ExtSRAM
+/**
+ * @brief Setup the external memory controller.
+ * Called in startup_stm32f10x_xx.s/.c before jump to main.
+ * This function configures the external SRAM mounted on STM3210E-EVAL
+ * board (STM32 High density devices). This SRAM will be used as program
+ * data memory (including heap and stack).
+ * @param None
+ * @retval None
+ */
+void SystemInit_ExtMemCtl(void)
+{
+/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is
+ required, then adjust the Register Addresses */
+
+ /* Enable FSMC clock */
+ RCC->AHBENR = 0x00000114;
+
+ /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
+ RCC->APB2ENR = 0x000001E0;
+
+/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/
+/*---------------- SRAM Address lines configuration -------------------------*/
+/*---------------- NOE and NWE configuration --------------------------------*/
+/*---------------- NE3 configuration ----------------------------------------*/
+/*---------------- NBL0, NBL1 configuration ---------------------------------*/
+
+ GPIOD->CRL = 0x44BB44BB;
+ GPIOD->CRH = 0xBBBBBBBB;
+
+ GPIOE->CRL = 0xB44444BB;
+ GPIOE->CRH = 0xBBBBBBBB;
+
+ GPIOF->CRL = 0x44BBBBBB;
+ GPIOF->CRH = 0xBBBB4444;
+
+ GPIOG->CRL = 0x44BBBBBB;
+ GPIOG->CRH = 0x44444B44;
+
+/*---------------- FSMC Configuration ---------------------------------------*/
+/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/
+
+ FSMC_Bank1->BTCR[4] = 0x00001011;
+ FSMC_Bank1->BTCR[5] = 0x00000200;
+}
+#endif /* DATA_IN_ExtSRAM */
+
+#ifdef SYSCLK_FREQ_HSE
+/**
+ * @brief Selects HSE as System clock source and configure HCLK, PCLK2
+ * and PCLK1 prescalers.
+ * @note This function should be used only after reset.
+ * @param None
+ * @retval None
+ */
+static void SetSysClockToHSE(void)
+{
+ __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+
+ /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
+ /* Enable HSE */
+ RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC->CR & RCC_CR_HSERDY;
+ StartUpCounter++;
+ } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+ if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+ {
+ HSEStatus = (uint32_t)0x01;
+ }
+ else
+ {
+ HSEStatus = (uint32_t)0x00;
+ }
+
+ if (HSEStatus == (uint32_t)0x01)
+ {
+
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
+ /* Enable Prefetch Buffer */
+ FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+ /* Flash 0 wait state */
+ FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+
+#ifndef STM32F10X_CL
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+#else
+ if (HSE_VALUE <= 24000000)
+ {
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+ }
+ else
+ {
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
+ }
+#endif /* STM32F10X_CL */
+#endif
+
+ /* HCLK = SYSCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+
+ /* PCLK2 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+
+ /* PCLK1 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+
+ /* Select HSE as system clock source */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+ RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;
+
+ /* Wait till HSE is used as system clock source */
+ while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)
+ {
+ }
+ }
+ else
+ { /* If HSE fails to start-up, the application will have wrong clock
+ configuration. User can add here some code to deal with this error */
+ }
+}
+#elif defined SYSCLK_FREQ_24MHz
+/**
+ * @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2
+ * and PCLK1 prescalers.
+ * @note This function should be used only after reset.
+ * @param None
+ * @retval None
+ */
+static void SetSysClockTo24(void)
+{
+ __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+
+ /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
+ /* Enable HSE */
+ RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC->CR & RCC_CR_HSERDY;
+ StartUpCounter++;
+ } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+ if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+ {
+ HSEStatus = (uint32_t)0x01;
+ }
+ else
+ {
+ HSEStatus = (uint32_t)0x00;
+ }
+
+ if (HSEStatus == (uint32_t)0x01)
+ {
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
+ /* Enable Prefetch Buffer */
+ FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+ /* Flash 0 wait state */
+ FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+#endif
+
+ /* HCLK = SYSCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+
+ /* PCLK2 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+
+ /* PCLK1 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+
+#ifdef STM32F10X_CL
+ /* Configure PLLs ------------------------------------------------------*/
+ /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */
+ RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 |
+ RCC_CFGR_PLLMULL6);
+
+ /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+ /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
+ RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+ RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+ RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+ RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+
+ /* Enable PLL2 */
+ RCC->CR |= RCC_CR_PLL2ON;
+ /* Wait till PLL2 is ready */
+ while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+ {
+ }
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);
+#else
+ /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+ /* Enable PLL */
+ RCC->CR |= RCC_CR_PLLON;
+
+ /* Wait till PLL is ready */
+ while((RCC->CR & RCC_CR_PLLRDY) == 0)
+ {
+ }
+
+ /* Select PLL as system clock source */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+ RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;
+
+ /* Wait till PLL is used as system clock source */
+ while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+ {
+ }
+ }
+ else
+ { /* If HSE fails to start-up, the application will have wrong clock
+ configuration. User can add here some code to deal with this error */
+ }
+}
+#elif defined SYSCLK_FREQ_36MHz
+/**
+ * @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2
+ * and PCLK1 prescalers.
+ * @note This function should be used only after reset.
+ * @param None
+ * @retval None
+ */
+static void SetSysClockTo36(void)
+{
+ __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+
+ /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
+ /* Enable HSE */
+ RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC->CR & RCC_CR_HSERDY;
+ StartUpCounter++;
+ } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+ if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+ {
+ HSEStatus = (uint32_t)0x01;
+ }
+ else
+ {
+ HSEStatus = (uint32_t)0x00;
+ }
+
+ if (HSEStatus == (uint32_t)0x01)
+ {
+ /* Enable Prefetch Buffer */
+ FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+ /* Flash 1 wait state */
+ FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
+
+ /* HCLK = SYSCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+
+ /* PCLK2 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+
+ /* PCLK1 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+
+#ifdef STM32F10X_CL
+ /* Configure PLLs ------------------------------------------------------*/
+
+ /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */
+ RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 |
+ RCC_CFGR_PLLMULL9);
+
+ /*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+ /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
+
+ RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+ RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+ RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+ RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+
+ /* Enable PLL2 */
+ RCC->CR |= RCC_CR_PLL2ON;
+ /* Wait till PLL2 is ready */
+ while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+ {
+ }
+
+#else
+ /* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+ /* Enable PLL */
+ RCC->CR |= RCC_CR_PLLON;
+
+ /* Wait till PLL is ready */
+ while((RCC->CR & RCC_CR_PLLRDY) == 0)
+ {
+ }
+
+ /* Select PLL as system clock source */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+ RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;
+
+ /* Wait till PLL is used as system clock source */
+ while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+ {
+ }
+ }
+ else
+ { /* If HSE fails to start-up, the application will have wrong clock
+ configuration. User can add here some code to deal with this error */
+ }
+}
+#elif defined SYSCLK_FREQ_48MHz
+/**
+ * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2
+ * and PCLK1 prescalers.
+ * @note This function should be used only after reset.
+ * @param None
+ * @retval None
+ */
+static void SetSysClockTo48(void)
+{
+ __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+
+ /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
+ /* Enable HSE */
+ RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC->CR & RCC_CR_HSERDY;
+ StartUpCounter++;
+ } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+ if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+ {
+ HSEStatus = (uint32_t)0x01;
+ }
+ else
+ {
+ HSEStatus = (uint32_t)0x00;
+ }
+
+ if (HSEStatus == (uint32_t)0x01)
+ {
+ /* Enable Prefetch Buffer */
+ FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+ /* Flash 1 wait state */
+ FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
+
+ /* HCLK = SYSCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+
+ /* PCLK2 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+
+ /* PCLK1 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+ /* Configure PLLs ------------------------------------------------------*/
+ /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+ /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+
+ RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+ RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+ RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+ RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+
+ /* Enable PLL2 */
+ RCC->CR |= RCC_CR_PLL2ON;
+ /* Wait till PLL2 is ready */
+ while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+ {
+ }
+
+
+ /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */
+ RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 |
+ RCC_CFGR_PLLMULL6);
+#else
+ /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+ /* Enable PLL */
+ RCC->CR |= RCC_CR_PLLON;
+
+ /* Wait till PLL is ready */
+ while((RCC->CR & RCC_CR_PLLRDY) == 0)
+ {
+ }
+
+ /* Select PLL as system clock source */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+ RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;
+
+ /* Wait till PLL is used as system clock source */
+ while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+ {
+ }
+ }
+ else
+ { /* If HSE fails to start-up, the application will have wrong clock
+ configuration. User can add here some code to deal with this error */
+ }
+}
+
+#elif defined SYSCLK_FREQ_56MHz
+/**
+ * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2
+ * and PCLK1 prescalers.
+ * @note This function should be used only after reset.
+ * @param None
+ * @retval None
+ */
+static void SetSysClockTo56(void)
+{
+ __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+
+ /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
+ /* Enable HSE */
+ RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC->CR & RCC_CR_HSERDY;
+ StartUpCounter++;
+ } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+ if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+ {
+ HSEStatus = (uint32_t)0x01;
+ }
+ else
+ {
+ HSEStatus = (uint32_t)0x00;
+ }
+
+ if (HSEStatus == (uint32_t)0x01)
+ {
+ /* Enable Prefetch Buffer */
+ FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+ /* Flash 2 wait state */
+ FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;
+
+ /* HCLK = SYSCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+
+ /* PCLK2 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+
+ /* PCLK1 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+ /* Configure PLLs ------------------------------------------------------*/
+ /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+ /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+
+ RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+ RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+ RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+ RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+
+ /* Enable PLL2 */
+ RCC->CR |= RCC_CR_PLL2ON;
+ /* Wait till PLL2 is ready */
+ while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+ {
+ }
+
+
+ /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */
+ RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 |
+ RCC_CFGR_PLLMULL7);
+#else
+ /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);
+
+#endif /* STM32F10X_CL */
+
+ /* Enable PLL */
+ RCC->CR |= RCC_CR_PLLON;
+
+ /* Wait till PLL is ready */
+ while((RCC->CR & RCC_CR_PLLRDY) == 0)
+ {
+ }
+
+ /* Select PLL as system clock source */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+ RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;
+
+ /* Wait till PLL is used as system clock source */
+ while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+ {
+ }
+ }
+ else
+ { /* If HSE fails to start-up, the application will have wrong clock
+ configuration. User can add here some code to deal with this error */
+ }
+}
+
+#elif defined SYSCLK_FREQ_72MHz
+/**
+ * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2
+ * and PCLK1 prescalers.
+ * @note This function should be used only after reset.
+ * @param None
+ * @retval None
+ */
+static void SetSysClockTo72(void)
+{
+ __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+
+ /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/
+ /* Enable HSE */
+ RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC->CR & RCC_CR_HSERDY;
+ StartUpCounter++;
+ } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+ if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+ {
+ HSEStatus = (uint32_t)0x01;
+ }
+ else
+ {
+ HSEStatus = (uint32_t)0x00;
+ }
+
+ if (HSEStatus == (uint32_t)0x01)
+ {
+ /* Enable Prefetch Buffer */
+ FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+ /* Flash 2 wait state */
+ FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+ FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;
+
+
+ /* HCLK = SYSCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+
+ /* PCLK2 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+
+ /* PCLK1 = HCLK */
+ RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+ /* Configure PLLs ------------------------------------------------------*/
+ /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+ /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+
+ RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+ RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+ RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+ RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+
+ /* Enable PLL2 */
+ RCC->CR |= RCC_CR_PLL2ON;
+ /* Wait till PLL2 is ready */
+ while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+ {
+ }
+
+
+ /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */
+ RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 |
+ RCC_CFGR_PLLMULL9);
+#else
+ /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
+ RCC_CFGR_PLLMULL));
+ RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+ /* Enable PLL */
+ RCC->CR |= RCC_CR_PLLON;
+
+ /* Wait till PLL is ready */
+ while((RCC->CR & RCC_CR_PLLRDY) == 0)
+ {
+ }
+
+ /* Select PLL as system clock source */
+ RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+ RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;
+
+ /* Wait till PLL is used as system clock source */
+ while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+ {
+ }
+ }
+ else
+ { /* If HSE fails to start-up, the application will have wrong clock
+ configuration. User can add here some code to deal with this error */
+ }
+}
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h
new file mode 100644
index 0000000..739f332
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x/system_stm32f10x.h
@@ -0,0 +1,98 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f10x.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f10x_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F10X_H
+#define __SYSTEM_STM32F10X_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F10x_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F10x_System_Exported_types
+ * @{
+ */
+
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F10x_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F10X_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CMSIS debug support.htm b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CMSIS debug support.htm
new file mode 100644
index 0000000..efda685
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CMSIS debug support.htm
@@ -0,0 +1,243 @@
+<html>
+
+<head>
+<title>CMSIS Debug Support</title>
+<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
+<meta name="GENERATOR" content="Microsoft FrontPage 6.0">
+<meta name="ProgId" content="FrontPage.Editor.Document">
+<style>
+<!--
+/*-----------------------------------------------------------
+Keil Software CHM Style Sheet
+-----------------------------------------------------------*/
+body { color: #000000; background-color: #FFFFFF; font-size: 75%; font-family:
+ Verdana, Arial, 'Sans Serif' }
+a:link { color: #0000FF; text-decoration: underline }
+a:visited { color: #0000FF; text-decoration: underline }
+a:active { color: #FF0000; text-decoration: underline }
+a:hover { color: #FF0000; text-decoration: underline }
+h1 { font-family: Verdana; font-size: 18pt; color: #000080; font-weight: bold;
+ text-align: Center; margin-right: 3 }
+h2 { font-family: Verdana; font-size: 14pt; color: #000080; font-weight: bold;
+ background-color: #CCCCCC; margin-top: 24; margin-bottom: 3;
+ padding: 6 }
+h3 { font-family: Verdana; font-size: 10pt; font-weight: bold; background-color:
+ #CCCCCC; margin-top: 24; margin-bottom: 3; padding: 6 }
+pre { font-family: Courier New; font-size: 10pt; background-color: #CCFFCC;
+ margin-left: 24; margin-right: 24 }
+ul { list-style-type: square; margin-top: 6pt; margin-bottom: 0 }
+ol { margin-top: 6pt; margin-bottom: 0 }
+li { clear: both; margin-bottom: 6pt }
+table { font-size: 100%; border-width: 0; padding: 0 }
+th { color: #FFFFFF; background-color: #000080; text-align: left; vertical-align:
+ bottom; padding-right: 6pt }
+tr { text-align: left; vertical-align: top }
+td { text-align: left; vertical-align: top; padding-right: 6pt }
+.ToolT { font-size: 8pt; color: #808080 }
+.TinyT { font-size: 8pt; text-align: Center }
+code { color: #000000; background-color: #E0E0E0; font-family: 'Courier New', Courier;
+ line-height: 120%; font-style: normal }
+/*-----------------------------------------------------------
+Notes
+-----------------------------------------------------------*/
+p.note { font-weight: bold; clear: both; margin-bottom: 3pt; padding-top: 6pt }
+/*-----------------------------------------------------------
+Expanding/Contracting Divisions
+-----------------------------------------------------------*/
+#expand { text-decoration: none; margin-bottom: 3pt }
+img.expand { border-style: none; border-width: medium }
+div.expand { display: none; margin-left: 9pt; margin-top: 0 }
+/*-----------------------------------------------------------
+Where List Tags
+-----------------------------------------------------------*/
+p.wh { font-weight: bold; clear: both; margin-top: 6pt; margin-bottom: 3pt }
+table.wh { width: 100% }
+td.whItem { white-space: nowrap; font-style: italic; padding-right: 6pt; padding-bottom:
+ 6pt }
+td.whDesc { padding-bottom: 6pt }
+/*-----------------------------------------------------------
+Keil Table Tags
+-----------------------------------------------------------*/
+table.kt { border: 1pt solid #000000 }
+th.kt { white-space: nowrap; border-bottom: 1pt solid #000000; padding-left: 6pt;
+ padding-right: 6pt; padding-top: 4pt; padding-bottom: 4pt }
+tr.kt { }
+td.kt { color: #000000; background-color: #E0E0E0; border-top: 1pt solid #A0A0A0;
+ padding-left: 6pt; padding-right: 6pt; padding-top: 2pt;
+ padding-bottom: 2pt }
+/*-----------------------------------------------------------
+-----------------------------------------------------------*/
+-->
+
+</style>
+</head>
+
+<body>
+
+<h1>CMSIS Debug Support</h1>
+
+<hr>
+
+<h2>Cortex-M3 ITM Debug Access</h2>
+<p>
+ The Cortex-M3 incorporates the Instrumented Trace Macrocell (ITM) that provides together with
+ the Serial Viewer Output trace capabilities for the microcontroller system. The ITM has
+ 32 communication channels which are able to transmit 32 / 16 / 8 bit values; two ITM
+ communication channels are used by CMSIS to output the following information:
+</p>
+<ul>
+ <li>ITM Channel 0: used for printf-style output via the debug interface.</li>
+ <li>ITM Channel 31: is reserved for RTOS kernel awareness debugging.</li>
+</ul>
+
+<h2>Debug IN / OUT functions</h2>
+<p>CMSIS provides following debug functions:</p>
+<ul>
+ <li>ITM_SendChar (uses ITM channel 0)</li>
+ <li>ITM_ReceiveChar (uses global variable)</li>
+ <li>ITM_CheckChar (uses global variable)</li>
+</ul>
+
+<h3>ITM_SendChar</h3>
+<p>
+ <strong>ITM_SendChar</strong> is used to transmit a character over ITM channel 0 from
+ the microcontroller system to the debug system. <br>
+ Only a 8 bit value is transmitted.
+</p>
+<pre>
+static __INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ /* check if debugger connected and ITM channel enabled for tracing */
+ if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA) &&
+ (ITM->TCR & ITM_TCR_ITMENA) &&
+ (ITM->TER & (1UL << 0)) )
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t)ch;
+ }
+ return (ch);
+}</pre>
+
+<h3>ITM_ReceiveChar</h3>
+<p>
+ ITM communication channel is only capable for OUT direction. For IN direction
+ a globel variable is used. A simple mechansim detects if a character is received.
+ The project to test need to be build with debug information.
+</p>
+
+<p>
+ The globale variable <strong>ITM_RxBuffer</strong> is used to transmit a 8 bit value from debug system
+ to microcontroller system. <strong>ITM_RxBuffer</strong> is 32 bit wide to enshure a proper handshake.
+</p>
+<pre>
+extern volatile int ITM_RxBuffer; /* variable to receive characters */
+</pre>
+<p>
+ A dedicated bit pattern is used to determin if <strong>ITM_RxBuffer</strong> is empty
+ or contains a valid value.
+</p>
+<pre>
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /* value identifying ITM_RxBuffer is ready for next character */
+</pre>
+<p>
+ <strong>ITM_ReceiveChar</strong> is used to receive a 8 bit value from the debug system. The function is nonblocking.
+ It returns the received character or '-1' if no character was available.
+</p>
+<pre>
+static __INLINE int ITM_ReceiveChar (void) {
+ int ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+</pre>
+
+<h3>ITM_CheckChar</h3>
+<p>
+ <strong>ITM_CheckChar</strong> is used to check if a character is received.
+</p>
+<pre>
+static __INLINE int ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}</pre>
+
+
+<h2>ITM Debug Support in uVision</h2>
+<p>
+ uVision uses in a debug session the <strong>Debug (printf) Viewer</strong> window to
+ display the debug data.
+</p>
+<p>Direction microcontroller system -> uVision:</p>
+<ul>
+ <li>
+ Characters received via ITM communication channel 0 are written in a printf style
+ to <strong>Debug (printf) Viewer</strong> window.
+ </li>
+</ul>
+
+<p>Direction uVision -> microcontroller system:</p>
+<ul>
+ <li>Check if <strong>ITM_RxBuffer</strong> variable is available (only performed once).</li>
+ <li>Read character from <strong>Debug (printf) Viewer</strong> window.</li>
+ <li>If <strong>ITM_RxBuffer</strong> empty write character to <strong>ITM_RxBuffer</strong>.</li>
+</ul>
+
+<p class="Note">Note</p>
+<ul>
+ <li><p>Current solution does not use a buffer machanism for trasmitting the characters.</p>
+ </li>
+</ul>
+
+<h2>RTX Kernel awareness in uVision</h2>
+<p>
+ uVision / RTX are using a simple and efficient solution for RTX Kernel awareness.
+ No format overhead is necessary.<br>
+ uVsion debugger decodes the RTX events via the 32 / 16 / 8 bit ITM write access
+ to ITM communication channel 31.
+</p>
+
+<p>Following RTX events are traced:</p>
+<ul>
+ <li>Task Create / Delete event
+ <ol>
+ <li>32 bit access. Task start address is transmitted</li>
+ <li>16 bit access. Task ID and Create/Delete flag are transmitted<br>
+ High byte holds Create/Delete flag, Low byte holds TASK ID.
+ </li>
+ </ol>
+ </li>
+ <li>Task switch event
+ <ol>
+ <li>8 bit access. Task ID of current task is transmitted</li>
+ </ol>
+ </li>
+</ul>
+
+<p class="Note">Note</p>
+<ul>
+ <li><p>Other RTOS information could be retrieved via memory read access in a polling mode manner.</p>
+ </li>
+</ul>
+
+
+<p class="MsoNormal"><span lang="EN-GB"> </span></p>
+
+<hr>
+
+<p class="TinyT">Copyright © KEIL - An ARM Company.<br>
+All rights reserved.<br>
+Visit our web site at <a href="http://www.keil.com">www.keil.com</a>.
+</p>
+
+</body>
+
+</html>
\ No newline at end of file
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CMSIS_changes.htm b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CMSIS_changes.htm
new file mode 100644
index 0000000..162ffcc
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/CMSIS_changes.htm
@@ -0,0 +1,320 @@
+<html>
+
+<head>
+<title>CMSIS Changes</title>
+<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
+<meta name="GENERATOR" content="Microsoft FrontPage 6.0">
+<meta name="ProgId" content="FrontPage.Editor.Document">
+<style>
+<!--
+/*-----------------------------------------------------------
+Keil Software CHM Style Sheet
+-----------------------------------------------------------*/
+body { color: #000000; background-color: #FFFFFF; font-size: 75%; font-family:
+ Verdana, Arial, 'Sans Serif' }
+a:link { color: #0000FF; text-decoration: underline }
+a:visited { color: #0000FF; text-decoration: underline }
+a:active { color: #FF0000; text-decoration: underline }
+a:hover { color: #FF0000; text-decoration: underline }
+h1 { font-family: Verdana; font-size: 18pt; color: #000080; font-weight: bold;
+ text-align: Center; margin-right: 3 }
+h2 { font-family: Verdana; font-size: 14pt; color: #000080; font-weight: bold;
+ background-color: #CCCCCC; margin-top: 24; margin-bottom: 3;
+ padding: 6 }
+h3 { font-family: Verdana; font-size: 10pt; font-weight: bold; background-color:
+ #CCCCCC; margin-top: 24; margin-bottom: 3; padding: 6 }
+pre { font-family: Courier New; font-size: 10pt; background-color: #CCFFCC;
+ margin-left: 24; margin-right: 24 }
+ul { list-style-type: square; margin-top: 6pt; margin-bottom: 0 }
+ol { margin-top: 6pt; margin-bottom: 0 }
+li { clear: both; margin-bottom: 6pt }
+table { font-size: 100%; border-width: 0; padding: 0 }
+th { color: #FFFFFF; background-color: #000080; text-align: left; vertical-align:
+ bottom; padding-right: 6pt }
+tr { text-align: left; vertical-align: top }
+td { text-align: left; vertical-align: top; padding-right: 6pt }
+.ToolT { font-size: 8pt; color: #808080 }
+.TinyT { font-size: 8pt; text-align: Center }
+code { color: #000000; background-color: #E0E0E0; font-family: 'Courier New', Courier;
+ line-height: 120%; font-style: normal }
+/*-----------------------------------------------------------
+Notes
+-----------------------------------------------------------*/
+p.note { font-weight: bold; clear: both; margin-bottom: 3pt; padding-top: 6pt }
+/*-----------------------------------------------------------
+Expanding/Contracting Divisions
+-----------------------------------------------------------*/
+#expand { text-decoration: none; margin-bottom: 3pt }
+img.expand { border-style: none; border-width: medium }
+div.expand { display: none; margin-left: 9pt; margin-top: 0 }
+/*-----------------------------------------------------------
+Where List Tags
+-----------------------------------------------------------*/
+p.wh { font-weight: bold; clear: both; margin-top: 6pt; margin-bottom: 3pt }
+table.wh { width: 100% }
+td.whItem { white-space: nowrap; font-style: italic; padding-right: 6pt; padding-bottom:
+ 6pt }
+td.whDesc { padding-bottom: 6pt }
+/*-----------------------------------------------------------
+Keil Table Tags
+-----------------------------------------------------------*/
+table.kt { border: 1pt solid #000000 }
+th.kt { white-space: nowrap; border-bottom: 1pt solid #000000; padding-left: 6pt;
+ padding-right: 6pt; padding-top: 4pt; padding-bottom: 4pt }
+tr.kt { }
+td.kt { color: #000000; background-color: #E0E0E0; border-top: 1pt solid #A0A0A0;
+ padding-left: 6pt; padding-right: 6pt; padding-top: 2pt;
+ padding-bottom: 2pt }
+/*-----------------------------------------------------------
+-----------------------------------------------------------*/
+-->
+
+</style>
+</head>
+
+<body>
+
+<h1>Changes to CMSIS version V1.20</h1>
+
+<hr>
+
+<h2>1. Removed CMSIS Middelware packages</h2>
+<p>
+ CMSIS Middleware is on hold from ARM side until a agreement between all CMSIS partners is found.
+</p>
+
+<h2>2. SystemFrequency renamed to SystemCoreClock</h2>
+<p>
+ The variable name <strong>SystemCoreClock</strong> is more precise than <strong>SystemFrequency</strong>
+ because the variable holds the clock value at which the core is running.
+</p>
+
+<h2>3. Changed startup concept</h2>
+<p>
+ The old startup concept (calling SystemInit_ExtMemCtl from startup file and calling SystemInit
+ from main) has the weakness that it does not work for controllers which need a already
+ configuerd clock system to configure the external memory controller.
+</p>
+
+<h3>Changed startup concept</h3>
+<ul>
+ <li>
+ SystemInit() is called from startup file before <strong>premain</strong>.
+ </li>
+ <li>
+ <strong>SystemInit()</strong> configures the clock system and also configures
+ an existing external memory controller.
+ </li>
+ <li>
+ <strong>SystemInit()</strong> must not use global variables.
+ </li>
+ <li>
+ <strong>SystemCoreClock</strong> is initialized with a correct predefined value.
+ </li>
+ <li>
+ Additional function <strong>void SystemCoreClockUpdate (void)</strong> is provided.<br>
+ <strong>SystemCoreClockUpdate()</strong> updates the variable <strong>SystemCoreClock</strong>
+ and must be called whenever the core clock is changed.<br>
+ <strong>SystemCoreClockUpdate()</strong> evaluates the clock register settings and calculates
+ the current core clock.
+ </li>
+</ul>
+
+
+<h2>4. Advanced Debug Functions</h2>
+<p>
+ ITM communication channel is only capable for OUT direction. To allow also communication for
+ IN direction a simple concept is provided.
+</p>
+<ul>
+ <li>
+ Global variable <strong>volatile int ITM_RxBuffer</strong> used for IN data.
+ </li>
+ <li>
+ Function <strong>int ITM_CheckChar (void)</strong> checks if a new character is available.
+ </li>
+ <li>
+ Function <strong>int ITM_ReceiveChar (void)</strong> retrieves the new character.
+ </li>
+</ul>
+
+<p>
+ For detailed explanation see file <strong>CMSIS debug support.htm</strong>.
+</p>
+
+
+<h2>5. Core Register Bit Definitions</h2>
+<p>
+ Files core_cm3.h and core_cm0.h contain now bit definitions for Core Registers. The name for the
+ defines correspond with the Cortex-M Technical Reference Manual.
+</p>
+<p>
+ e.g. SysTick structure with bit definitions
+</p>
+<pre>
+/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick
+ memory mapped structure for SysTick
+ @{
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+/*@}*/ /* end of group CMSIS_CM3_SysTick */</pre>
+
+<h2>7. DoxyGen Tags</h2>
+<p>
+ DoxyGen tags in files core_cm3.[c,h] and core_cm0.[c,h] are reworked to create proper documentation
+ using DoxyGen.
+</p>
+
+<h2>8. Folder Structure</h2>
+<p>
+ The folder structure is changed to differentiate the single support packages.
+</p>
+
+ <ul>
+ <li>CM0</li>
+ <li>CM3
+ <ul>
+ <li>CoreSupport</li>
+ <li>DeviceSupport</li>
+ <ul>
+ <li>Vendor
+ <ul>
+ <li>Device
+ <ul>
+ <li>Startup
+ <ul>
+ <li>Toolchain</li>
+ <li>Toolchain</li>
+ <li>...</li>
+ </ul>
+ </li>
+ </ul>
+ </li>
+ <li>Device</li>
+ <li>...</li>
+ </ul>
+ </li>
+ <li>Vendor</li>
+ <li>...</li>
+ </ul>
+ </li>
+ <li>Example
+ <ul>
+ <li>Toolchain
+ <ul>
+ <li>Device</li>
+ <li>Device</li>
+ <li>...</li>
+ </ul>
+ </li>
+ <li>Toolchain</li>
+ <li>...</li>
+ </ul>
+ </li>
+ </ul>
+ </li>
+
+ <li>Documentation</li>
+ </ul>
+
+<h2>9. Open Points</h2>
+<p>
+ Following points need to be clarified and solved:
+</p>
+<ul>
+ <li>
+ <p>
+ Equivalent C and Assembler startup files.
+ </p>
+ <p>
+ Is there a need for having C startup files although assembler startup files are
+ very efficient and do not need to be changed?
+ <p/>
+ </li>
+ <li>
+ <p>
+ Placing of HEAP in external RAM.
+ </p>
+ <p>
+ It must be possible to place HEAP in external RAM if the device supports an
+ external memory controller.
+ </p>
+ </li>
+ <li>
+ <p>
+ Placing of STACK /HEAP.
+ </p>
+ <p>
+ STACK should always be placed at the end of internal RAM.
+ </p>
+ <p>
+ If HEAP is placed in internal RAM than it should be placed after RW ZI section.
+ </p>
+ </li>
+ <li>
+ <p>
+ Removing core_cm3.c and core_cm0.c.
+ </p>
+ <p>
+ On a long term the functions in core_cm3.c and core_cm0.c must be replaced with
+ appropriate compiler intrinsics.
+ </p>
+ </li>
+</ul>
+
+
+<h2>10. Limitations</h2>
+<p>
+ The following limitations are not covered with the current CMSIS version:
+</p>
+<ul>
+ <li>
+ No <strong>C startup files</strong> for ARM toolchain are provided.
+ </li>
+ <li>
+ No <strong>C startup files</strong> for GNU toolchain are provided.
+ </li>
+ <li>
+ No <strong>C startup files</strong> for IAR toolchain are provided.
+ </li>
+ <li>
+ No <strong>Tasking</strong> projects are provided yet.
+ </li>
+</ul>
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/Documentation/CMSIS_Core.htm b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/Documentation/CMSIS_Core.htm
new file mode 100644
index 0000000..6fd131e
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/Documentation/CMSIS_Core.htm
@@ -0,0 +1,1337 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<html xmlns:p="urn:schemas-microsoft-com:office:powerpoint" xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office"><head>
+
+ <title>CMSIS: Cortex Microcontroller Software Interface Standard</title><meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
+ <meta name="ProgId" content="FrontPage.Editor.Document">
+ <style>
+<!--
+/*-----------------------------------------------------------Keil Software CHM Style Sheet
+-----------------------------------------------------------*/
+body { color: #000000; background-color: #FFFFFF; font-size: 75%; font-family: Verdana, Arial, 'Sans Serif' }
+a:link { color: #0000FF; text-decoration: underline }
+a:visited { color: #0000FF; text-decoration: underline }
+a:active { color: #FF0000; text-decoration: underline }
+a:hover { color: #FF0000; text-decoration: underline }
+h1 { font-family: Verdana; font-size: 18pt; color: #000080; font-weight: bold; text-align: Center; margin-right: 3 }
+h2 { font-family: Verdana; font-size: 14pt; color: #000080; font-weight: bold; background-color: #CCCCCC; margin-top: 24; margin-bottom: 3; padding: 6 }
+h3 { font-family: Verdana; font-size: 10pt; font-weight: bold; background-color: #CCCCCC; margin-top: 24; margin-bottom: 3; padding: 6 }
+pre { font-family: Courier New; font-size: 10pt; background-color: #CCFFCC; margin-left: 24; margin-right: 24 }
+ul { list-style-type: square; margin-top: 6pt; margin-bottom: 0 }
+ol { margin-top: 6pt; margin-bottom: 0 }
+li { clear: both; margin-bottom: 6pt }
+table { font-size: 100%; border-width: 0; padding: 0 }
+th { color: #FFFFFF; background-color: #000080; text-align: left; vertical-align: bottom; padding-right: 6pt }
+tr { text-align: left; vertical-align: top }
+td { text-align: left; vertical-align: top; padding-right: 6pt }
+.ToolT { font-size: 8pt; color: #808080 }
+.TinyT { font-size: 8pt; text-align: Center }
+code { color: #000000; background-color: #E0E0E0; font-family: 'Courier New', Courier; line-height: 120%; font-style: normal }
+/*-----------------------------------------------------------Notes
+-----------------------------------------------------------*/
+p.note { font-weight: bold; clear: both; margin-bottom: 3pt; padding-top: 6pt }
+/*-----------------------------------------------------------Expanding/Contracting Divisions
+-----------------------------------------------------------*/
+#expand { text-decoration: none; margin-bottom: 3pt }
+img.expand { border-style: none; border-width: medium }
+div.expand { display: none; margin-left: 9pt; margin-top: 0 }
+/*-----------------------------------------------------------Where List Tags
+-----------------------------------------------------------*/
+p.wh { font-weight: bold; clear: both; margin-top: 6pt; margin-bottom: 3pt }
+table.wh { width: 100% }
+td.whItem { white-space: nowrap; font-style: italic; padding-right: 6pt; padding-bottom: 6pt }
+td.whDesc { padding-bottom: 6pt }
+/*-----------------------------------------------------------Keil Table Tags
+-----------------------------------------------------------*/
+table.kt { width: 100%; border: 1pt solid #000000 }
+th.kt { white-space: nowrap; border-bottom: 1pt solid #000000; padding-left: 6pt; padding-right: 6pt; padding-top: 4pt; padding-bottom: 4pt }
+tr.kt { }
+td.kt { color: #000000; background-color: #E0E0E0; border-top: 1pt solid #A0A0A0; padding-left: 6pt; padding-right: 6pt; padding-top: 2pt; padding-bottom: 2pt }
+/*----------------------------------------------------------------------------------------------------------------------*/
+ .style1 {
+ background-color: #E0E0E0;
+}
+.O
+ {color:#1D315B;
+ font-size:149%;}
+ -->
+ </style></head>
+<body>
+<h1>Cortex Microcontroller Software Interface Standard</h1>
+
+<p align="center">This file describes the Cortex Microcontroller Software Interface Standard (CMSIS).</p>
+<p align="center">Version: 1.30 - 30. October 2009</p>
+
+<p class="TinyT">Information in this file, the accompany manuals, and software is<br>
+ Copyright © ARM Ltd.<br>All rights reserved.
+</p>
+
+<hr>
+
+<p><span style="FONT-WEIGHT: bold">Revision History</span></p>
+<ul>
+ <li>Version 1.00: initial release. </li>
+ <li>Version 1.01: added __LDREX<em>x</em>, __STREX<em>x</em>, and __CLREX.</li>
+ <li>Version 1.02: added Cortex-M0. </li>
+ <li>Version 1.10: second review. </li>
+ <li>Version 1.20: third review. </li>
+ <li>Version 1.30 PRE-RELEASE: reworked Startup Concept, additional Debug Functionality.</li>
+ <li>Version 1.30 2nd PRE-RELEASE: changed folder structure, added doxyGen comments, added Bit definitions.</li>
+ <li>Version 1.30: updated Device Support Packages.</li>
+</ul>
+
+<hr>
+
+<h2>Contents</h2>
+
+<ol>
+ <li class="LI2"><a href="#1">About</a></li>
+ <li class="LI2"><a href="#2">Coding Rules and Conventions</a></li>
+ <li class="LI2"><a href="#3">CMSIS Files</a></li>
+ <li class="LI2"><a href="#4">Core Peripheral Access Layer</a></li>
+ <li class="LI2"><a href="#5">CMSIS Example</a></li>
+</ol>
+
+<h2><a name="1"></a>About</h2>
+
+<p>
+ The <strong>Cortex Microcontroller Software Interface Standard (CMSIS)</strong> answers the challenges
+ that are faced when software components are deployed to physical microcontroller devices based on a
+ Cortex-M0 or Cortex-M3 processor. The CMSIS will be also expanded to future Cortex-M
+ processor cores (the term Cortex-M is used to indicate that). The CMSIS is defined in close co-operation
+ with various silicon and software vendors and provides a common approach to interface to peripherals,
+ real-time operating systems, and middleware components.
+</p>
+
+<p>ARM provides as part of the CMSIS the following software layers that are
+available for various compiler implementations:</p>
+<ul>
+ <li><strong>Core Peripheral Access Layer</strong>: contains name definitions,
+ address definitions and helper functions to
+ access core registers and peripherals. It defines also a device
+ independent interface for RTOS Kernels that includes debug channel
+ definitions.</li>
+</ul>
+
+<p>These software layers are expanded by Silicon partners with:</p>
+<ul>
+ <li><strong>Device Peripheral Access Layer</strong>: provides definitions
+ for all device peripherals</li>
+ <li><strong>Access Functions for Peripherals (optional)</strong>: provides
+ additional helper functions for peripherals</li>
+</ul>
+
+<p>CMSIS defines for a Cortex-M Microcontroller System:</p>
+<ul>
+ <li style="text-align: left;">A common way to access peripheral registers
+ and a common way to define exception vectors.</li>
+ <li style="text-align: left;">The register names of the <strong>Core
+ Peripherals</strong> and<strong> </strong>the names of the <strong>Core
+ Exception Vectors</strong>.</li>
+ <li>An device independent interface for RTOS Kernels including a debug
+ channel.</li>
+</ul>
+
+<p>
+ By using CMSIS compliant software components, the user can easier re-use template code.
+ CMSIS is intended to enable the combination of software components from multiple middleware vendors.
+</p>
+
+<h2><a name="2"></a>Coding Rules and Conventions</h2>
+
+<p>
+ The following section describes the coding rules and conventions used in the CMSIS
+ implementation. It contains also information about data types and version number information.
+</p>
+
+<h3>Essentials</h3>
+<ul>
+ <li>The CMSIS C code conforms to MISRA 2004 rules. In case of MISRA violations,
+ there are disable and enable sequences for PC-LINT inserted.</li>
+ <li>ANSI standard data types defined in the ANSI C header file
+ <strong><stdint.h></strong> are used.</li>
+ <li>#define constants that include expressions must be enclosed by
+ parenthesis.</li>
+ <li>Variables and parameters have a complete data type.</li>
+ <li>All functions in the <strong>Core Peripheral Access Layer</strong> are
+ re-entrant.</li>
+ <li>The <strong>Core Peripheral Access Layer</strong> has no blocking code
+ (which means that wait/query loops are done at other software layers).</li>
+ <li>For each exception/interrupt there is definition for:
+ <ul>
+ <li>an exception/interrupt handler with the postfix <strong>_Handler </strong>
+ (for exceptions) or <strong>_IRQHandler</strong> (for interrupts).</li>
+ <li>a default exception/interrupt handler (weak definition) that contains an endless loop.</li>
+ <li>a #define of the interrupt number with the postfix <strong>_IRQn</strong>.</li>
+ </ul></li>
+</ul>
+
+<h3>Recommendations</h3>
+
+<p>The CMSIS recommends the following conventions for identifiers.</p>
+<ul>
+ <li><strong>CAPITAL</strong> names to identify Core Registers, Peripheral Registers, and CPU Instructions.</li>
+ <li><strong>CamelCase</strong> names to identify peripherals access functions and interrupts.</li>
+ <li><strong>PERIPHERAL_</strong> prefix to identify functions that belong to specify peripherals.</li>
+ <li><strong>Doxygen</strong> comments for all functions are included as described under <strong>Function Comments</strong> below.</li>
+</ul>
+
+<b>Comments</b>
+
+<ul>
+ <li>Comments use the ANSI C90 style (<em>/* comment */</em>) or C++ style
+ (<em>// comment</em>). It is assumed that the programming tools support today
+ consistently the C++ comment style.</li>
+ <li><strong>Function Comments</strong> provide for each function the following information:
+ <ul>
+ <li>one-line brief function overview.</li>
+ <li>detailed parameter explanation.</li>
+ <li>detailed information about return values.</li>
+ <li>detailed description of the actual function.</li>
+ </ul>
+ <p><b>Doxygen Example:</b></p>
+ <pre>
+/**
+ * @brief Enable Interrupt in NVIC Interrupt Controller
+ * @param IRQn interrupt number that specifies the interrupt
+ * @return none.
+ * Enable the specified interrupt in the NVIC Interrupt Controller.
+ * Other settings of the interrupt such as priority are not affected.
+ */</pre>
+ </li>
+</ul>
+
+<h3>Data Types and IO Type Qualifiers</h3>
+
+<p>
+ The <strong>Cortex-M HAL</strong> uses the standard types from the standard ANSI C header file
+ <strong><stdint.h></strong>. <strong>IO Type Qualifiers</strong> are used to specify the access
+ to peripheral variables. IO Type Qualifiers are indented to be used for automatic generation of
+ debug information of peripheral registers.
+</p>
+
+<table class="kt" border="0" cellpadding="0" cellspacing="0">
+ <tbody>
+ <tr>
+ <th class="kt" nowrap="nowrap">IO Type Qualifier</th>
+ <th class="kt">#define</th>
+ <th class="kt">Description</th>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">__I</td>
+ <td class="kt">volatile const</td>
+ <td class="kt">Read access only</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">__O</td>
+ <td class="kt">volatile</td>
+ <td class="kt">Write access only</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">__IO</td>
+ <td class="kt">volatile</td>
+ <td class="kt">Read and write access</td>
+ </tr>
+ </tbody>
+</table>
+
+<h3>CMSIS Version Number</h3>
+<p>
+ File <strong>core_cm3.h</strong> contains the version number of the CMSIS with the following define:
+</p>
+
+<pre>
+#define __CM3_CMSIS_VERSION_MAIN (0x01) /* [31:16] main version */
+#define __CM3_CMSIS_VERSION_SUB (0x30) /* [15:0] sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB)</pre>
+
+<p>
+ File <strong>core_cm0.h</strong> contains the version number of the CMSIS with the following define:
+</p>
+
+<pre>
+#define __CM0_CMSIS_VERSION_MAIN (0x01) /* [31:16] main version */
+#define __CM0_CMSIS_VERSION_SUB (0x30) /* [15:0] sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | __CM0_CMSIS_VERSION_SUB)</pre>
+
+
+<h3>CMSIS Cortex Core</h3>
+<p>
+ File <strong>core_cm3.h</strong> contains the type of the CMSIS Cortex-M with the following define:
+</p>
+
+<pre>
+#define __CORTEX_M (0x03)</pre>
+
+<p>
+ File <strong>core_cm0.h</strong> contains the type of the CMSIS Cortex-M with the following define:
+</p>
+
+<pre>
+#define __CORTEX_M (0x00)</pre>
+
+
+<h2><a name="3"></a>CMSIS Files</h2>
+<p>
+ This section describes the Files provided in context with the CMSIS to access the Cortex-M
+ hardware and peripherals.
+</p>
+
+<table class="kt" border="0" cellpadding="0" cellspacing="0">
+ <tbody>
+ <tr>
+ <th class="kt" nowrap="nowrap">File</th>
+ <th class="kt">Provider</th>
+ <th class="kt">Description</th>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap"><i>device.h</i></td>
+ <td class="kt">Device specific (provided by silicon partner)</td>
+ <td class="kt">Defines the peripherals for the actual device. The file may use
+ several other include files to define the peripherals of the actual device.</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">core_cm0.h</td>
+ <td class="kt">ARM (for RealView ARMCC, IAR, and GNU GCC)</td>
+ <td class="kt">Defines the core peripherals for the Cortex-M0 CPU and core peripherals.</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">core_cm3.h</td>
+ <td class="kt">ARM (for RealView ARMCC, IAR, and GNU GCC)</td>
+ <td class="kt">Defines the core peripherals for the Cortex-M3 CPU and core peripherals.</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">core_cm0.c</td>
+ <td class="kt">ARM (for RealView ARMCC, IAR, and GNU GCC)</td>
+ <td class="kt">Provides helper functions that access core registers.</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">core_cm3.c</td>
+ <td class="kt">ARM (for RealView ARMCC, IAR, and GNU GCC)</td>
+ <td class="kt">Provides helper functions that access core registers.</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">startup<i>_device</i></td>
+ <td class="kt">ARM (adapted by compiler partner / silicon partner)</td>
+ <td class="kt">Provides the Cortex-M startup code and the complete (device specific) Interrupt Vector Table</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">system<i>_device</i></td>
+ <td class="kt">ARM (adapted by silicon partner)</td>
+ <td class="kt">Provides a device specific configuration file for the device. It configures the device initializes
+ typically the oscillator (PLL) that is part of the microcontroller device</td>
+ </tr>
+ </tbody>
+</table>
+
+<h3><em>device.h</em></h3>
+
+<p>
+ The file <em><strong>device.h</strong></em> is provided by the silicon vendor and is the
+ <u><strong>central include file</strong></u> that the application programmer is using in
+ the C source code. This file contains:
+</p>
+<ul>
+ <li>
+ <p><strong>Interrupt Number Definition</strong>: provides interrupt numbers
+ (IRQn) for all core and device specific exceptions and interrupts.</p>
+ </li>
+ <li>
+ <p><strong>Configuration for core_cm0.h / core_cm3.h</strong>: reflects the
+ actual configuration of the Cortex-M processor that is part of the actual
+ device. As such the file <strong>core_cm0.h / core_cm3.h</strong> is included that
+ implements access to processor registers and core peripherals. </p>
+ </li>
+ <li>
+ <p><strong>Device Peripheral Access Layer</strong>: provides definitions
+ for all device peripherals. It contains all data structures and the address
+ mapping for the device specific peripherals. </p>
+ </li>
+ <li><strong>Access Functions for Peripherals (optional)</strong>: provides
+ additional helper functions for peripherals that are useful for programming
+ of these peripherals. Access Functions may be provided as inline functions
+ or can be extern references to a device specific library provided by the
+ silicon vendor.</li>
+</ul>
+
+
+<h4><strong>Interrupt Number Definition</strong></h4>
+
+<p>To access the device specific interrupts the device.h file defines IRQn
+numbers for the complete device using a enum typedef as shown below:</p>
+<pre>
+typedef enum IRQn
+{
+/****** Cortex-M3 Processor Exceptions/Interrupt Numbers ************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers ****************************************************************/
+ WWDG_STM_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_STM_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ :
+ :
+ } IRQn_Type;</pre>
+
+
+<h4>Configuration for core_cm0.h / core_cm3.h</h4>
+<p>
+ The Cortex-M core configuration options which are defined for each device implementation. Some
+ configuration options are reflected in the CMSIS layer using the #define settings described below.
+</p>
+<p>
+ To access core peripherals file <em><strong>device.h</strong></em> includes file <b>core_cm0.h / core_cm3.h</b>.
+ Several features in <strong>core_cm0.h / core_cm3.h</strong> are configured by the following defines that must be
+ defined before <strong>#include <core_cm0.h></strong> / <strong>#include <core_cm3.h></strong>
+ preprocessor command.
+</p>
+
+<table class="kt" border="0" cellpadding="0" cellspacing="0">
+ <tbody>
+ <tr>
+ <th class="kt" nowrap="nowrap">#define</th>
+ <th class="kt" nowrap="nowrap">File</th>
+ <th class="kt" nowrap="nowrap">Value</th>
+ <th class="kt">Description</th>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">__NVIC_PRIO_BITS</td>
+ <td class="kt">core_cm0.h</td>
+ <td class="kt" nowrap="nowrap">(2)</td>
+ <td class="kt">Number of priority bits implemented in the NVIC (device specific)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">__NVIC_PRIO_BITS</td>
+ <td class="kt">core_cm3.h</td>
+ <td class="kt" nowrap="nowrap">(2 ... 8)</td>
+ <td class="kt">Number of priority bits implemented in the NVIC (device specific)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">__MPU_PRESENT</td>
+ <td class="kt">core_cm0.h, core_cm3.h</td>
+ <td class="kt" nowrap="nowrap">(0, 1)</td>
+ <td class="kt">Defines if an MPU is present or not</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">__Vendor_SysTickConfig</td>
+ <td class="kt">core_cm0.h, core_cm3.h</td>
+ <td class="kt" nowrap="nowrap">(1)</td>
+ <td class="kt">When this define is setup to 1, the <strong>SysTickConfig</strong> function
+ in <strong>core_cm3.h</strong> is excluded. In this case the <em><strong>device.h</strong></em>
+ file must contain a vendor specific implementation of this function.</td>
+ </tr>
+ </tbody>
+</table>
+
+
+<h4>Device Peripheral Access Layer</h4>
+<p>
+ Each peripheral uses a prefix which consists of <strong><device abbreviation>_</strong>
+ and <strong><peripheral name>_</strong> to identify peripheral registers that access this
+ specific peripheral. The intention of this is to avoid name collisions caused
+ due to short names. If more than one peripheral of the same type exists,
+ identifiers have a postfix (digit or letter). For example:
+</p>
+<ul>
+ <li><device abbreviation>_UART_Type: defines the generic register layout for all UART channels in a device.
+ <pre>
+typedef struct
+{
+ union {
+ __I uint8_t RBR; /*!< Offset: 0x000 Receiver Buffer Register */
+ __O uint8_t THR; /*!< Offset: 0x000 Transmit Holding Register */
+ __IO uint8_t DLL; /*!< Offset: 0x000 Divisor Latch LSB */
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM; /*!< Offset: 0x004 Divisor Latch MSB */
+ __IO uint32_t IER; /*!< Offset: 0x004 Interrupt Enable Register */
+ };
+ union {
+ __I uint32_t IIR; /*!< Offset: 0x008 Interrupt ID Register */
+ __O uint8_t FCR; /*!< Offset: 0x008 FIFO Control Register */
+ };
+ __IO uint8_t LCR; /*!< Offset: 0x00C Line Control Register */
+ uint8_t RESERVED1[7];
+ __I uint8_t LSR; /*!< Offset: 0x014 Line Status Register */
+ uint8_t RESERVED2[7];
+ __IO uint8_t SCR; /*!< Offset: 0x01C Scratch Pad Register */
+ uint8_t RESERVED3[3];
+ __IO uint32_t ACR; /*!< Offset: 0x020 Autobaud Control Register */
+ __IO uint8_t ICR; /*!< Offset: 0x024 IrDA Control Register */
+ uint8_t RESERVED4[3];
+ __IO uint8_t FDR; /*!< Offset: 0x028 Fractional Divider Register */
+ uint8_t RESERVED5[7];
+ __IO uint8_t TER; /*!< Offset: 0x030 Transmit Enable Register */
+ uint8_t RESERVED6[39];
+ __I uint8_t FIFOLVL; /*!< Offset: 0x058 FIFO Level Register */
+} LPC_UART_TypeDef;</pre>
+ </li>
+ <li><device abbreviation>_UART1: is a pointer to a register structure that refers to a specific UART.
+ For example UART1->DR is the data register of UART1.
+ <pre>
+#define LPC_UART2 ((LPC_UART_TypeDef *) LPC_UART2_BASE )
+#define LPC_UART3 ((LPC_UART_TypeDef *) LPC_UART3_BASE )</pre>
+ </li>
+</ul>
+
+<h5>Minimal Requiements</h5>
+<p>
+ To access the peripheral registers and related function in a device the files <strong><em>device.h</em></strong>
+ and <strong>core_cm0.h</strong> / <strong>core_cm3.h</strong> defines as a minimum:
+</p>
+<ul>
+ <li>The <strong>Register Layout Typedef</strong> for each peripheral that defines all register names.
+ Names that start with RESERVE are used to introduce space into the structure to adjust the addresses of
+ the peripheral registers. For example:
+ <pre>
+typedef struct {
+ __IO uint32_t CTRL; /* SysTick Control and Status Register */
+ __IO uint32_t LOAD; /* SysTick Reload Value Register */
+ __IO uint32_t VAL; /* SysTick Current Value Register */
+ __I uint32_t CALIB; /* SysTick Calibration Register */
+ } SysTick_Type;</pre>
+ </li>
+
+ <li>
+ <strong>Base Address</strong> for each peripheral (in case of multiple peripherals
+ that use the same <strong>register layout typedef</strong> multiple base addresses are defined). For example:
+ <pre>
+#define SysTick_BASE (SCS_BASE + 0x0010) /* SysTick Base Address */</pre>
+ </li>
+
+ <li>
+ <strong>Access Definition</strong> for each peripheral (in case of multiple peripherals that use
+ the same <strong>register layout typedef</strong> multiple access definitions exist, i.e. LPC_UART0,
+ LPC_UART2). For Example:
+ <pre>
+#define SysTick ((SysTick_Type *) SysTick_BASE) /* SysTick access definition */</pre>
+ </li>
+</ul>
+
+<p>
+ These definitions allow to access the peripheral registers from user code with simple assignments like:
+</p>
+<pre>SysTick->CTRL = 0;</pre>
+
+<h5>Optional Features</h5>
+<p>In addition the <em> <strong>device.h </strong></em>file may define:</p>
+<ul>
+ <li>
+ #define constants that simplify access to the peripheral registers.
+ These constant define bit-positions or other specific patterns are that required for the
+ programming of the peripheral registers. The identifiers used start with
+ <strong><device abbreviation>_</strong> and <strong><peripheral name>_</strong>.
+ It is recommended to use CAPITAL letters for such #define constants.
+ </li>
+ <li>
+ Functions that perform more complex functions with the peripheral (i.e. status query before
+ a sending register is accessed). Again these function start with
+ <strong><device abbreviation>_</strong> and <strong><peripheral name>_</strong>.
+ </li>
+</ul>
+
+<h3>core_cm0.h and core_cm0.c</h3>
+<p>
+ File <b>core_cm0.h</b> describes the data structures for the Cortex-M0 core peripherals and does
+ the address mapping of this structures. It also provides basic access to the Cortex-M0 core registers
+ and core peripherals with efficient functions (defined as <strong>static inline</strong>).
+</p>
+<p>
+ File <b>core_cm0.c</b> defines several helper functions that access processor registers.
+</p>
+<p>Together these files implement the <a href="#4">Core Peripheral Access Layer</a> for a Cortex-M0.</p>
+
+<h3>core_cm3.h and core_cm3.c</h3>
+<p>
+ File <b>core_cm3.h</b> describes the data structures for the Cortex-M3 core peripherals and does
+ the address mapping of this structures. It also provides basic access to the Cortex-M3 core registers
+ and core peripherals with efficient functions (defined as <strong>static inline</strong>).
+</p>
+<p>
+ File <b>core_cm3.c</b> defines several helper functions that access processor registers.
+</p>
+<p>Together these files implement the <a href="#4">Core Peripheral Access Layer</a> for a Cortex-M3.</p>
+
+<h3>startup_<em>device</em></h3>
+<p>
+ A template file for <strong>startup_<em>device</em></strong> is provided by ARM for each supported
+ compiler. It is adapted by the silicon vendor to include interrupt vectors for all device specific
+ interrupt handlers. Each interrupt handler is defined as <strong><em>weak</em></strong> function
+ to an dummy handler. Therefore the interrupt handler can be directly used in application software
+ without any requirements to adapt the <strong>startup_<em>device</em></strong> file.
+</p>
+<p>
+ The following exception names are fixed and define the start of the vector table for a Cortex-M0:
+</p>
+<pre>
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler</pre>
+
+<p>
+ The following exception names are fixed and define the start of the vector table for a Cortex-M3:
+</p>
+<pre>
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD MemManage_Handler ; MPU Fault Handler
+ DCD BusFault_Handler ; Bus Fault Handler
+ DCD UsageFault_Handler ; Usage Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD DebugMon_Handler ; Debug Monitor Handler
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler</pre>
+
+<p>
+ In the following examples for device specific interrupts are shown:
+</p>
+<pre>
+; External Interrupts
+ DCD WWDG_IRQHandler ; Window Watchdog
+ DCD PVD_IRQHandler ; PVD through EXTI Line detect
+ DCD TAMPER_IRQHandler ; Tamper</pre>
+
+<p>
+ Device specific interrupts must have a dummy function that can be overwritten in user code.
+ Below is an example for this dummy function.
+</p>
+<pre>
+Default_Handler PROC
+ EXPORT WWDG_IRQHandler [WEAK]
+ EXPORT PVD_IRQHandler [WEAK]
+ EXPORT TAMPER_IRQHandler [WEAK]
+ :
+ :
+ WWDG_IRQHandler
+ PVD_IRQHandler
+ TAMPER_IRQHandler
+ :
+ :
+ B .
+ ENDP</pre>
+
+<p>
+ The user application may simply define an interrupt handler function by using the handler name
+ as shown below.
+</p>
+<pre>
+void WWDG_IRQHandler(void)
+{
+ :
+ :
+}</pre>
+
+
+<h3><a name="4"></a>system_<em>device</em>.c</h3>
+<p>
+ A template file for <strong>system_<em>device</em>.c</strong> is provided by ARM but adapted by
+ the silicon vendor to match their actual device. As a <strong>minimum requirement</strong>
+ this file must provide a device specific system configuration function and a global variable
+ that contains the system frequency. It configures the device and initializes typically the
+ oscillator (PLL) that is part of the microcontroller device.
+</p>
+<p>
+ The file <strong>system_</strong><em><strong>device</strong></em><strong>.c</strong> must provide
+ as a minimum requirement the SystemInit function as shown below.
+</p>
+
+<table class="kt" border="0" cellpadding="0" cellspacing="0">
+ <tbody>
+ <tr>
+ <th class="kt">Function Definition</th>
+ <th class="kt">Description</th>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void SystemInit (void)</td>
+ <td class="kt">Setup the microcontroller system. Typically this function configures the
+ oscillator (PLL) that is part of the microcontroller device. For systems
+ with variable clock speed it also updates the variable SystemCoreClock.<br>
+ SystemInit is called from startup<i>_device</i> file.</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void SystemCoreClockUpdate (void)</td>
+ <td class="kt">Updates the variable SystemCoreClock and must be called whenever the
+ core clock is changed during program execution. SystemCoreClockUpdate()
+ evaluates the clock register settings and calculates the current core clock.
+</td>
+ </tr>
+ </tbody>
+</table>
+
+<p>
+ Also part of the file <strong>system_</strong><em><strong>device</strong></em><strong>.c</strong>
+ is the variable <strong>SystemCoreClock</strong> which contains the current CPU clock speed shown below.
+</p>
+
+<table class="kt" border="0" cellpadding="0" cellspacing="0">
+ <tbody>
+ <tr>
+ <th class="kt">Variable Definition</th>
+ <th class="kt">Description</th>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t SystemCoreClock</td>
+ <td class="kt">Contains the system core clock (which is the system clock frequency supplied
+ to the SysTick timer and the processor core clock). This variable can be
+ used by the user application to setup the SysTick timer or configure other
+ parameters. It may also be used by debugger to query the frequency of the
+ debug timer or configure the trace clock speed.<br>
+ SystemCoreClock is initialized with a correct predefined value.<br><br>
+ The compiler must be configured to avoid the removal of this variable in
+ case that the application program is not using it. It is important for
+ debug systems that the variable is physically present in memory so that
+ it can be examined to configure the debugger.</td>
+ </tr>
+ </tbody>
+</table>
+
+<p class="Note">Note</p>
+<ul>
+ <li><p>The above definitions are the minimum requirements for the file <strong>
+ system_</strong><em><strong>device</strong></em><strong>.c</strong>. This
+ file may export more functions or variables that provide a more flexible
+ configuration of the microcontroller system.</p>
+ </li>
+</ul>
+
+
+<h2>Core Peripheral Access Layer</h2>
+
+<h3>Cortex-M Core Register Access</h3>
+<p>
+ The following functions are defined in <strong>core_cm0.h</strong> / <strong>core_cm3.h</strong>
+ and provide access to Cortex-M core registers.
+</p>
+
+<table class="kt" border="0" cellpadding="0" cellspacing="0">
+ <tbody>
+ <tr>
+ <th class="kt">Function Definition</th>
+ <th class="kt">Core</th>
+ <th class="kt">Core Register</th>
+ <th class="kt">Description</th>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __enable_irq (void)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">PRIMASK = 0</td>
+ <td class="kt">Global Interrupt enable (using the instruction <strong>CPSIE
+ i</strong>)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __disable_irq (void)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">PRIMASK = 1</td>
+ <td class="kt">Global Interrupt disable (using the instruction <strong>
+ CPSID i</strong>)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __set_PRIMASK (uint32_t value)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">PRIMASK = value</td>
+ <td class="kt">Assign value to Priority Mask Register (using the instruction
+ <strong>MSR</strong>)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t __get_PRIMASK (void)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">return PRIMASK</td>
+ <td class="kt">Return Priority Mask Register (using the instruction
+ <strong>MRS</strong>)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __enable_fault_irq (void)</td>
+ <td class="kt">M3</td>
+ <td class="kt">FAULTMASK = 0</td>
+ <td class="kt">Global Fault exception and Interrupt enable (using the
+ instruction <strong>CPSIE
+ f</strong>)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __disable_fault_irq (void)</td>
+ <td class="kt">M3</td>
+ <td class="kt">FAULTMASK = 1</td>
+ <td class="kt">Global Fault exception and Interrupt disable (using the
+ instruction <strong>CPSID f</strong>)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __set_FAULTMASK (uint32_t value)</td>
+ <td class="kt">M3</td>
+ <td class="kt">FAULTMASK = value</td>
+ <td class="kt">Assign value to Fault Mask Register (using the instruction
+ <strong>MSR</strong>)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t __get_FAULTMASK (void)</td>
+ <td class="kt">M3</td>
+ <td class="kt">return FAULTMASK</td>
+ <td class="kt">Return Fault Mask Register (using the instruction <strong>MRS</strong>)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __set_BASEPRI (uint32_t value)</td>
+ <td class="kt">M3</td>
+ <td class="kt">BASEPRI = value</td>
+ <td class="kt">Set Base Priority (using the instruction <strong>MSR</strong>)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uiuint32_t __get_BASEPRI (void)</td>
+ <td class="kt">M3</td>
+ <td class="kt">return BASEPRI</td>
+ <td class="kt">Return Base Priority (using the instruction <strong>MRS</strong>)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __set_CONTROL (uint32_t value)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">CONTROL = value</td>
+ <td class="kt">Set CONTROL register value (using the instruction <strong>MSR</strong>)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t __get_CONTROL (void)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">return CONTROL</td>
+ <td class="kt">Return Control Register Value (using the instruction
+ <strong>MRS</strong>)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __set_PSP (uint32_t TopOfProcStack)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">PSP = TopOfProcStack</td>
+ <td class="kt">Set Process Stack Pointer value (using the instruction
+ <strong>MSR</strong>)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t __get_PSP (void)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">return PSP</td>
+ <td class="kt">Return Process Stack Pointer (using the instruction <strong>MRS</strong>)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __set_MSP (uint32_t TopOfMainStack)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">MSP = TopOfMainStack</td>
+ <td class="kt">Set Main Stack Pointer (using the instruction <strong>MSR</strong>)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t __get_MSP (void)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">return MSP</td>
+ <td class="kt">Return Main Stack Pointer (using the instruction <strong>MRS</strong>)</td>
+ </tr>
+ </tbody>
+</table>
+
+<h3>Cortex-M Instruction Access</h3>
+<p>
+ The following functions are defined in <strong>core_cm0.h</strong> / <strong>core_cm3.h</strong>and
+ generate specific Cortex-M instructions. The functions are implemented in the file
+ <strong>core_cm0.c</strong> / <strong>core_cm3.c</strong>.
+</p>
+
+<table class="kt" border="0" cellpadding="0" cellspacing="0">
+ <tbody>
+ <tr>
+ <th class="kt">Name</th>
+ <th class="kt">Core</th>
+ <th class="kt">Generated CPU Instruction</th>
+ <th class="kt">Description</th>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __NOP (void)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">NOP</td>
+ <td class="kt">No Operation</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __WFI (void)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">WFI</td>
+ <td class="kt">Wait for Interrupt</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __WFE (void)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">WFE</td>
+ <td class="kt">Wait for Event</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __SEV (void)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">SEV</td>
+ <td class="kt">Set Event</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __ISB (void)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">ISB</td>
+ <td class="kt">Instruction Synchronization Barrier</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __DSB (void)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">DSB</td>
+ <td class="kt">Data Synchronization Barrier</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __DMB (void)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">DMB</td>
+ <td class="kt">Data Memory Barrier</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t __REV (uint32_t value)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">REV</td>
+ <td class="kt">Reverse byte order in integer value.</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t __REV16 (uint16_t value)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">REV16</td>
+ <td class="kt">Reverse byte order in unsigned short value. </td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">sint32_t __REVSH (sint16_t value)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">REVSH</td>
+ <td class="kt">Reverse byte order in signed short value with sign extension to integer.</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t __RBIT (uint32_t value)</td>
+ <td class="kt">M3</td>
+ <td class="kt">RBIT</td>
+ <td class="kt">Reverse bit order of value</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint8_t __LDREXB (uint8_t *addr)</td>
+ <td class="kt">M3</td>
+ <td class="kt">LDREXB</td>
+ <td class="kt">Load exclusive byte</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint16_t __LDREXH (uint16_t *addr)</td>
+ <td class="kt">M3</td>
+ <td class="kt">LDREXH</td>
+ <td class="kt">Load exclusive half-word</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t __LDREXW (uint32_t *addr)</td>
+ <td class="kt">M3</td>
+ <td class="kt">LDREXW</td>
+ <td class="kt">Load exclusive word</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t __STREXB (uint8_t value, uint8_t *addr)</td>
+ <td class="kt">M3</td>
+ <td class="kt">STREXB</td>
+ <td class="kt">Store exclusive byte</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t __STREXB (uint16_t value, uint16_t *addr)</td>
+ <td class="kt">M3</td>
+ <td class="kt">STREXH</td>
+ <td class="kt">Store exclusive half-word</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t __STREXB (uint32_t value, uint32_t *addr)</td>
+ <td class="kt">M3</td>
+ <td class="kt">STREXW</td>
+ <td class="kt">Store exclusive word</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void __CLREX (void)</td>
+ <td class="kt">M3</td>
+ <td class="kt">CLREX</td>
+ <td class="kt">Remove the exclusive lock created by __LDREXB, __LDREXH, or __LDREXW</td>
+ </tr>
+ </tbody>
+</table>
+
+
+<h3>NVIC Access Functions</h3>
+<p>
+ The CMSIS provides access to the NVIC via the register interface structure and several helper
+ functions that simplify the setup of the NVIC. The CMSIS HAL uses IRQ numbers (IRQn) to
+ identify the interrupts. The first device interrupt has the IRQn value 0. Therefore negative
+ IRQn values are used for processor core exceptions.
+</p>
+<p>
+ For the IRQn values of core exceptions the file <strong><em>device.h</em></strong> provides
+ the following enum names.
+</p>
+
+<table class="kt" border="0" cellpadding="0" cellspacing="0">
+ <tbody>
+ <tr>
+ <th class="kt" nowrap="nowrap">Core Exception enum Value</th>
+ <th class="kt">Core</th>
+ <th class="kt">IRQn</th>
+ <th class="kt">Description</th>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">NonMaskableInt_IRQn</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">-14</td>
+ <td class="kt">Cortex-M Non Maskable Interrupt</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">HardFault_IRQn</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">-13</td>
+ <td class="kt">Cortex-M Hard Fault Interrupt</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">MemoryManagement_IRQn</td>
+ <td class="kt">M3</td>
+ <td class="kt">-12</td>
+ <td class="kt">Cortex-M Memory Management Interrupt</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">BusFault_IRQn</td>
+ <td class="kt">M3</td>
+ <td class="kt">-11</td>
+ <td class="kt">Cortex-M Bus Fault Interrupt</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">UsageFault_IRQn</td>
+ <td class="kt">M3</td>
+ <td class="kt">-10</td>
+ <td class="kt">Cortex-M Usage Fault Interrupt</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">SVCall_IRQn</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">-5</td>
+ <td class="kt">Cortex-M SV Call Interrupt </td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">DebugMonitor_IRQn</td>
+ <td class="kt">M3</td>
+ <td class="kt">-4</td>
+ <td class="kt">Cortex-M Debug Monitor Interrupt</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">PendSV_IRQn</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">-2</td>
+ <td class="kt">Cortex-M Pend SV Interrupt</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">SysTick_IRQn</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">-1</td>
+ <td class="kt">Cortex-M System Tick Interrupt</td>
+ </tr>
+ </tbody>
+</table>
+
+<p>The following functions simplify the setup of the NVIC.
+The functions are defined as <strong>static inline</strong>.</p>
+
+<table class="kt" border="0" cellpadding="0" cellspacing="0">
+ <tbody>
+ <tr>
+ <th class="kt" nowrap="nowrap">Name</th>
+ <th class="kt">Core</th>
+ <th class="kt">Parameter</th>
+ <th class="kt">Description</th>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void NVIC_SetPriorityGrouping (uint32_t PriorityGroup)</td>
+ <td class="kt">M3</td>
+ <td class="kt">Priority Grouping Value</td>
+ <td class="kt">Set the Priority Grouping (Groups . Subgroups)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t NVIC_GetPriorityGrouping (void)</td>
+ <td class="kt">M3</td>
+ <td class="kt">(void)</td>
+ <td class="kt">Get the Priority Grouping (Groups . Subgroups)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void NVIC_EnableIRQ (IRQn_Type IRQn)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">IRQ Number</td>
+ <td class="kt">Enable IRQn</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void NVIC_DisableIRQ (IRQn_Type IRQn)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">IRQ Number</td>
+ <td class="kt">Disable IRQn</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t NVIC_GetPendingIRQ (IRQn_Type IRQn)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">IRQ Number</td>
+ <td class="kt">Return 1 if IRQn is pending else 0</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void NVIC_SetPendingIRQ (IRQn_Type IRQn)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">IRQ Number</td>
+ <td class="kt">Set IRQn Pending</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void NVIC_ClearPendingIRQ (IRQn_Type IRQn)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">IRQ Number</td>
+ <td class="kt">Clear IRQn Pending Status</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t NVIC_GetActive (IRQn_Type IRQn)</td>
+ <td class="kt">M3</td>
+ <td class="kt">IRQ Number</td>
+ <td class="kt">Return 1 if IRQn is active else 0</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void NVIC_SetPriority (IRQn_Type IRQn, uint32_t priority)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">IRQ Number, Priority</td>
+ <td class="kt">Set Priority for IRQn<br>
+ (not threadsafe for Cortex-M0)</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t NVIC_GetPriority (IRQn_Type IRQn)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">IRQ Number</td>
+ <td class="kt">Get Priority for IRQn</td>
+ </tr>
+ <tr>
+<!-- <td class="kt" nowrap="nowrap">uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)</td> -->
+ <td class="kt">uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)</td>
+ <td class="kt">M3</td>
+ <td class="kt">IRQ Number, Priority Group, Preemptive Priority, Sub Priority</td>
+ <td class="kt">Encode priority for given group, preemptive and sub priority</td>
+ </tr>
+<!-- <td class="kt" nowrap="nowrap">NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)</td> -->
+ <td class="kt">NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)</td>
+ <td class="kt">M3</td>
+ <td class="kt">IRQ Number, Priority, pointer to Priority Group, pointer to Preemptive Priority, pointer to Sub Priority</td>
+ <td class="kt">Deccode given priority to group, preemptive and sub priority</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void NVIC_SystemReset (void)</td>
+ <td class="kt">M0, M3</td>
+ <td class="kt">(void)</td>
+ <td class="kt">Resets the System</td>
+ </tr>
+ </tbody>
+</table>
+<p class="Note">Note</p>
+<ul>
+ <li><p>The processor exceptions have negative enum values. Device specific interrupts
+ have positive enum values and start with 0. The values are defined in
+ <b><em>device.h</em></b> file.
+ </p>
+ </li>
+ <li><p>The values for <b>PreemptPriority</b> and <b>SubPriority</b>
+ used in functions <b>NVIC_EncodePriority</b> and <b>NVIC_DecodePriority</b>
+ depend on the available __NVIC_PRIO_BITS implemented in the NVIC.
+ </p>
+ </li>
+</ul>
+
+
+<h3>SysTick Configuration Function</h3>
+
+<p>The following function is used to configure the SysTick timer and start the
+SysTick interrupt.</p>
+
+<table class="kt" border="0" cellpadding="0" cellspacing="0">
+ <tbody>
+ <tr>
+ <th class="kt" nowrap="nowrap">Name</th>
+ <th class="kt">Parameter</th>
+ <th class="kt">Description</th>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">uint32_t Sys<span class="style1">TickConfig
+ (uint32_t ticks)</span></td>
+ <td class="kt">ticks is SysTick counter reload value</td>
+ <td class="kt">Setup the SysTick timer and enable the SysTick interrupt. After this
+ call the SysTick timer creates interrupts with the specified time
+ interval. <br>
+ <br>
+ Return: 0 when successful, 1 on failure.<br>
+ </td>
+ </tr>
+ </tbody>
+</table>
+
+
+<h3>Cortex-M3 ITM Debug Access</h3>
+
+<p>The Cortex-M3 incorporates the Instrumented Trace Macrocell (ITM) that
+provides together with the Serial Viewer Output trace capabilities for the
+microcontroller system. The ITM has 32 communication channels; two ITM
+communication channels are used by CMSIS to output the following information:</p>
+<ul>
+ <li>ITM Channel 0: implements the <strong>ITM_SendChar</strong> function
+ which can be used for printf-style output via the debug interface.</li>
+ <li>ITM Channel 31: is reserved for the RTOS kernel and can be used for
+ kernel awareness debugging.</li>
+</ul>
+<p class="Note">Note</p>
+<ul>
+ <li><p>The ITM channel 31 is selected for the RTOS kernel since some kernels
+ may use the Privileged level for program execution. ITM
+ channels have 4 groups with 8 channels each, whereby each group can be
+ configured for access rights in the Unprivileged level. The ITM channel 0
+ may be therefore enabled for the user task whereas ITM channel 31 may be
+ accessible only in Privileged level from the RTOS kernel itself.</p>
+ </li>
+</ul>
+
+<p>The prototype of the <strong>ITM_SendChar</strong> routine is shown in the
+table below.</p>
+
+<table class="kt" border="0" cellpadding="0" cellspacing="0">
+ <tbody>
+ <tr>
+ <th class="kt" nowrap="nowrap">Name</th>
+ <th class="kt">Parameter</th>
+ <th class="kt">Description</th>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">void uint32_t ITM_SendChar(uint32_t chr)</td>
+ <td class="kt">character to output</td>
+ <td class="kt">The function outputs a character via the ITM channel 0. The
+ function returns when no debugger is connected that has booked the
+ output. It is blocking when a debugger is connected, but the
+ previous character send is not transmitted. <br><br>
+ Return: the input character 'chr'.</td>
+ </tr>
+ </tbody>
+</table>
+
+<p>
+ Example for the usage of the ITM Channel 31 for RTOS Kernels:
+</p>
+<pre>
+ // check if debugger connected and ITM channel enabled for tracing
+ if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA) &&
+ (ITM->TCR & ITM_TCR_ITMENA) &&
+ (ITM->TER & (1UL << 31))) {
+ // transmit trace data
+ while (ITM->PORT31_U32 == 0);
+ ITM->PORT[31].u8 = task_id; // id of next task
+ while (ITM->PORT[31].u32 == 0);
+ ITM->PORT[31].u32 = task_status; // status information
+ }</pre>
+
+
+<h3>Cortex-M3 additional Debug Access</h3>
+
+<p>CMSIS provides additional debug functions to enlarge the Cortex-M3 Debug Access.
+Data can be transmitted via a certain global buffer variable towards the target system.</p>
+
+<p>The buffer variable and the prototypes of the additional functions are shown in the
+table below.</p>
+
+<table class="kt" border="0" cellpadding="0" cellspacing="0">
+ <tbody>
+ <tr>
+ <th class="kt" nowrap="nowrap">Name</th>
+ <th class="kt">Parameter</th>
+ <th class="kt">Description</th>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">extern volatile int ITM_RxBuffer</td>
+ <td class="kt"> </td>
+ <td class="kt">Buffer to transmit data towards debug system. <br><br>
+ Value 0x5AA55AA5 indicates that buffer is empty.</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">int ITM_ReceiveChar (void)</td>
+ <td class="kt">none</td>
+ <td class="kt">The nonblocking functions returns the character stored in
+ ITM_RxBuffer. <br><br>
+ Return: -1 indicates that no character was received.</td>
+ </tr>
+ <tr>
+ <td class="kt" nowrap="nowrap">int ITM_CheckChar (void)</td>
+ <td class="kt">none</td>
+ <td class="kt">The function checks if a character is available in ITM_RxBuffer. <br><br>
+ Return: 1 indicates that a character is available, 0 indicates that
+ no character is available.</td>
+ </tr>
+ </tbody>
+</table>
+
+
+<h2><a name="5"></a>CMSIS Example</h2>
+<p>
+ The following section shows a typical example for using the CMSIS layer in user applications.
+ The example is based on a STM32F10x Device.
+</p>
+<pre>
+#include "stm32f10x.h"
+
+volatile uint32_t msTicks; /* timeTicks counter */
+
+void SysTick_Handler(void) {
+ msTicks++; /* increment timeTicks counter */
+}
+
+__INLINE static void Delay (uint32_t dlyTicks) {
+ uint32_t curTicks = msTicks;
+
+ while ((msTicks - curTicks) < dlyTicks);
+}
+
+__INLINE static void LED_Config(void) {
+ ; /* Configure the LEDs */
+}
+
+__INLINE static void LED_On (uint32_t led) {
+ ; /* Turn On LED */
+}
+
+__INLINE static void LED_Off (uint32_t led) {
+ ; /* Turn Off LED */
+}
+
+int main (void) {
+ if (SysTick_Config (SystemCoreClock / 1000)) { /* Setup SysTick for 1 msec interrupts */
+ ; /* Handle Error */
+ while (1);
+ }
+
+ LED_Config(); /* configure the LEDs */
+
+ while(1) {
+ LED_On (0x100); /* Turn on the LED */
+ Delay (100); /* delay 100 Msec */
+ LED_Off (0x100); /* Turn off the LED */
+ Delay (100); /* delay 100 Msec */
+ }
+}</pre>
+
+
+</body></html>
\ No newline at end of file
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/License.doc b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/CMSIS/License.doc
new file mode 100644
index 0000000000000000000000000000000000000000..b6b8acecc137bca709444106cba045d3d01daedd
GIT binary patch
literal 39936
zcmeI53w&Hvz3*2ZZBuBVr4Jqg-IP)q2qBafkZ1Flwy9}S@}SfrFqxSo(<U=vX3{i3
zAs~XN$g4aqf*_(-go}XO<Mqn@fJdncSK-J}UUDybJ%R{QtCyqP3q9Z8+IvrSl9?n0
z@x|=&o3;0P{?~u~*MI&0Yp-mcdUDoFUwGhvpPNzFsiwrdvunDU8i+6Aex?6B)0hVC
z75C1rUAq*$3UFJv{*E~C+Lyj<O3s~LYRry(9?>8g!^m<m@E0Fu%wDErW5>oP(odvq
z?1-P~rSnWxy)k$1Uu5y=1Ks4`kH|Iruxr=e*@t}heulg3&0El=OJVTdj~gA%QG|Cj
zO)+Lpu`#RnaU+7^2}E5={8@zmi%^7jOmp+yxSuhvaXWRk`>gP6Zlm7w=<qbJ(b3^t
z>Y;hFFQKl<gbT@c>HfxaQ}ERf8S{OfPon%>RWR!E`Qf)aD%tq)`9jqjy!`t7(C??8
zN6#<tu$FT32w(Sz8Xc;=jiisRXY{l96TJL-f^n0%_xm?deSZBu9ey~OHge_h>+|{a
z7IHL08H<m<WZCi`NHN;Wm%F>+OOzPDoR@5VzOOM$dFX^6)r68iU4Fg?y;)TbzaJ;w
zfA-UD=0C%aU$0-4&mXn(2YTc4*$@5p{bxV)%jXOIe4|5O9{n(1c|ZOc=#m^xbd7Gu
zfA;z8Kj#bm`hEQn3@<~+{E9)35(eW{#(!42uD!^k`MrctL%f<0wU(VHKEEdlwYX3W
z-7+I9V|p%J1rF>!2i7P1Q%++%5=%s4PA2KJrwO`aPAl=m)Fq=aC!B~nt$ndbyfYpN
zXX43()0s@!Ty@D*Cbq>{6OW{lkz^v1O7`@`QWWmY41`lLry-Gvr8>h@)S97|a4LFY
zd3oEahE^xkRPVI6hFYA)hPqHwUC60f*%At^2{pAjq}Di%p_Mg_fyl+zdl|P?IJKd+
zb)is`v%b0ASsZF;TSYZBPHRKc%Epk>&{W@WMnipjO=G3g+~UW&)lqvx+xiNphQ@1J
z*3kBvhPF_>vv>hd3o4uy6reT{<}|Ocx2?_XEl^k2Tn~v9Yh4?vYgo}xSJT$e+~m~M
z)itkKThp|jw#g3V9+g#&ZGed8rpEQox`xI^o2A*!K>ccG{L0&!Z4YUtu9;5R2HRHE
zwAol%4y|o-Y8o4TO4~v$Yg+04C^~A_J9QBC5jB5(gUiuv;tUB5O|5Ozpd=!i#mIFH
z(AF+qDypt|t?in}WR)V<Bxu*rXe8j1y6O|HF?Q%zZHS86VJAeW3u1;#zh(OfJ~phd
z9j<S7nwsgbUq#*`l|JX&o8AlCHQ4IKnws^tVUJgpu5h@l8N&z|G(tcso!WMHyjoW^
zw>Q>1Yg>?)HYB1Y)Yjgjv6_SwAe>cBdHMB$Il0a0jfE3wI|<Y7RE=n=zWa$;r3QkN
zd_)t$g!j^j)0E5%#53J#se^c;%XR>wV_iv}DxJ|Jq`SjCJx(H-apH+cPd`0e9Ivp2
z;=O%6vEEoB<7%X2r;|i)rJTP0j-GhBI~H})L88-6D%KfGNzFy6%T_U>yC+dIRfiLU
zPAn0o4iOiNbSIKM$*y=ztPW?K-teH)5pxo;NGzQWrv{}md&8Sz4hpd!)v4lrsbsW2
zl2KG2`ce8)l*J&?))7fUx@r_7#u8HLbo6H&X-{>VlD+9z&t|g6w)CZFwP(;t$1)lO
zO52{q)1%b$;#gHzm7{jzQpcSsR5QJbrYnhrhh4EmEEUcqQ$%!xBb&Umo_I$poDyY_
z?sC(wqtXed)3M$TRYxM+*~DFtKPNex!#(k+HySA?8tdrqa?<`vK%s8bzgC5loNylu
zaF-G&NcM>s@jE@3&cu4vKr|KKOap%Llbn`@);gFH>5kKAreC$dXN>~6d$s-q6D#a!
zGMv5P^rnGiYE#-SVtw6%Y1-{^dcuRr{tW%>goBw_7wsb!k$5W7AJ0H~I^LB?pCm#S
z$2V6vEp3g%Ea{GSbvr$=&9NRtN+aUS-~`n%!OH!`Ze>eNQ(J5KF)S0U{T&<WkpxNW
zE}hyOPa`w7wz{4$Qk8a=R6562I!kRQmbnT}64f#2Kzf3XP?{b&{fQ`ClMt#~ti`a3
z?ouf{&LFLlVZ>!|xWY*eB<M3;>`cXC2o)m|OQezfm_xl<9wnc!$>|FZYNDx;{zSO5
zGu{)o{K|C4Q&CcpacGp4u(+ebiBSq75SC;#?oKu@inclsD_7*lvo9oVzK}o<B9d~N
zvQutxG}ajx?FhfiAUM+z>q!ov8InkN-=GR)6$F&|m1#1josM`yQ&%i<jT3i9!pOW+
zGVH*>zL>aK$-GP)72AS3N+YE1V}@Z!qhG|nN+*>Z4EMlpakkPy{(7PVaps+6v9+^K
zEJu$`cQporCz3V#BQ#Q0&-V4F`jRLYq%|tJOZHh^*&W`jN#jMuqLoN{q91FE=@HB@
z9IHIZPRLX_ScPJtJNmWx)BViLL8ZYyJO2mbG#iblGpRUANhzLkLwR+_Bi&ZVAUnA=
z*-3OVUU7$e(N}4ozCp-DFggdVz@(+EJ>zqf)w!7A^_Dh~<IWO)k?XA>tw&<(uXum2
zOsaIJd=z=Mvs2U9YL(PxmJ=2~@hpYT$!I-*S7`*-E``JE*zjDEov;M0(l&~jV@-H1
zFs=&lX1k^gn#5HDEDd&il#3yk&V@j74pY+;9&q#6d6ck<A6+w?A(M&`Db0YiAY%&M
zRVBA_%2wzXteRvuT#}(r3npR_ttt;~iNyL?MbpDpKu=c3xvC=^i6m3eu>2k?zMd*M
zrqXKCaOAxHxLt!C%lt|w6VIR;#U<&DSXw5@#HvgM^6TTQl9bAf#S>L{O!UHGmZOYZ
z<41bIn<Hsg-H%Vd>=S%3=4?M1;ecHtG<OlL%77ICWelj)q_-B6n9d~o`dHaW%PIi0
zu}^?q0z5NED@4`+z-V$gZnfC3JX#?dq1BMk;lZ)1okV|FmBW7+;0in|l_j1G-U273
z<*5wFP-8adn0)R+$O4u2o!hGNV>K@(w6|+oLbB3vA#n^B)ZkIIF7UiLFS-?fz*$$*
zqBXoBge!aI+LlmjYo*h$W^H2wrQ`*))wH#@HMguMwyCbMy&i|E5;w37H=xb+JFN#<
zX({px1}eo5S`%uiTSXf+wGEB9t(8tIMOs(X)Tv(QbUa)e+tl3D(6pk323+@<)>kyN
zH9?W}XKS3bH7#uob?uEcEza8ZmbJ~Tp-C}9j*m-w$O*NyG`F;RY@oBDmNV$MnAy^>
za#fpLI<huXd5avrHO=)|ADL{;W7v+D+DOJ0+@LcWTJfaulUFzmZJ0K=T@+YT^ATM6
zHR8DK73sKKaAPIyS|1m`X@o0Iy6B-qeS2M-&EFQPTh-Lu*t}AsR3B=sYiX!uc*xcg
zq7Ix=Ja?z9VNIy2e5rU65EpOq#d~{WQCT}E4`zKYmP5wf5OF6ba}ASdb2#2(4JS`Z
z<DFKAcvD{n602RnZgPz^S=1>suJswHR(4#tD;#I)%KUQ8ylgQH<&pN*Kz9<8T8o5h
zd1vP+=6<iW-?TJN!t}CJHs~u^drMSB`q2lyG1dZV%9;UM8!$zb!MZe9>>c4WbF{w?
zS10U5dcyJE>|%xqO<`0IdeCP<1xBO#D^qmXu7i2QHrp7YtZEESXqosG&Vp>E3p|%t
zbWwL4p8H!;*1GW@AQZI+O|Fi>_UnagFV$TNu=ebj$pn!-rQF=IKvg=M<M5k>7=4<K
zMX<EA#97lT+-3dIY*iG>>QFhB(Ezd01)hM7RMvJ$qUxSO&mCRh3W?u0ScFLs>xw~6
zr>r=)MbQ@PV)3QPa1<ex#m3r;aG+r$F+@1g1(75No>?g5dAkD%zf(}&i;b&+p?DN~
zEu89zb89Oexy*<A@eSy_ODF?zeRd%IjRU)?vQQ#g)_1THCE3V|k1GWdY?-%KZal*h
ztJ!ltBnbG6crYo=L)qcI@w7Z7Px^dWk};D~IV=sh>N6;cr5Z~NOO^(1jBrsPB2P<8
z50-l@C38l$y`&?Sip1giAnsl`oz&g{3GxBFCRF19`vP(%{Y{D7tsw5363~eUEN4ls
zWr)FMyF#*MBSqRqq$(YaN9@*tJH@j3B1|OogsXkzN82q3*@<DxXv^E+G^w;!ogF;P
zN^iGB&Bqdqe#8n8Yw|MmUsKZ8Az3ql(sr}LI*M6oCU*3STj@<F(QjAvQ9i80x{maU
z$I4=j2gz6>+zU4mU?w2DDz?j3aNdpLvhvULhXC!s;OSYtM1$<UU|coP1C0#L`PN>}
zX^0;7#oPK9vdJOdZuCfs$N2pT1c;p~_Mkd#*J!{O{7Lj<q<vI=oL!2v8=qn3;cIu`
zaHGw<x;1v5?v=f6owm4iv=WA`cUQZ)iYpcCvF5ot5tNPL&iBN7*;uh=mWHQGraKD3
z6TWb7vLB@&&(cnWzHr<sQSrt1zXF?+mXZ;j(!jL0E<C2Xs=C^>>TQFTDD;x&Ov^V{
zCs=8$E>Nf7WDbh6f-how!&~CL{k_y;RTmT{2V5oZ?K5dhgZae<%<&#;$0ydxudLFs
zR-^<U1JvKKX|KX4VqcEExUAZj8zYI9kLIfZn=j<%s|hG*lvoYQQJvOUqU@9C8Vv+H
zqW$imQJK=coyS1qUb`CNUQ0osjQD1!D`YWr+SIFZ)-zmThE}2_%_im1*)PpzXPlIX
zh_}rJ>++<aJz+(JH#r$^yJu7jyhri+*hn?JPoWvQ#AY31$i|ZfYh2E2!Ev`e7azk$
zlI557ETVW~kqmTNarU3A+SnXVda@0bfz}Z!cOObLFlDoBa7j@+0aj{!YO*6K=Pu={
zUu*ezRj`37{gq-tk>!PUiLtOCEZuQdNyf|?UUoYy5@%`iG>v*avVOZ+#AI?eqqGsi
zIK<ewW4dERBqDaM2g-FN*$ho+56<0_TvEaKBJ6h4AgR?3x@aHvs4jmiBtRM#&j{vZ
z#dCO}9iEY_ZvBy-SeVr`!uGRvOs(zE0k7E$*9Pi9ER3<2R_}Y_+V@gtwE0jj&2Eh;
z*-hC!cWUhIfOU<bx})%xj;gL+x@6f=XDq3zcAC~4y{eXi<t63irT*`1oSid5^>QZ8
zTJ9`}Mx8ZWxaM37oU@LQbF?zV`?@t)@pGz=L$z<lnU(>tq`LZqxzndlpY7B)*WnJV
z4YjnbcNWwk@BNHYlO<$<Gp3TUq|JpWOC5Estyvjz<{UFuDsi^c)XrN!xgv9x&{Uq5
z)FQ)?qbYcFv??zz-~AW1f9?{T^V+Y>m{UO?I1i*i8hiyj1QzXK%rbEIp2mC?+zY+|
zUjFgR-@5DitsA$l+q&X}!$p`gxBJ$zkD7Vivris0b*uL=&8v&e>ELV-=Gh!Dulvhq
zY|EWSX{C*m<FI+%w=KLnXX)NmrZfTi%ZkX=a?lqh%5~&Ktp#e#Ql{SJ>{q2<n|fY*
zL{Tu)S!I{_{qO6x<Co2?`X<a>F|Yfe;&o<O*(DQYJ$i0;!^SmmQ1wnCKgatRe}B9+
zw)cQNIk7SW^l)6S7bL(|FgS~oaE#%PISKYOc!m>A8IIum2K;+aF5mOR8}FjFmx5(}
z5PbM%@Zo{H51$XFjCcqp1n=QR$-<KI?NdxqcafQWSJcb_8x|IwwXi6>u%s*cwSgmz
z;anlP?DJOhm@#mY=e;jGuz1#GzkK^_!gC32`kNKo?V+YX`p8<x=HAQJHZs?6U4gbG
z7(rSjB4(Dx|I-{xy67-t-hMmSxx)QFHU~;eO;J&?^!PJiI`iG1_a}3o0Da&s@c+Qa
zS*k7rn~+}V1z#sz!u@{+J73uO!-v20@V3jh^>2H)YyHY40p?ZstAe!qC>1tRF&;Xv
zTT^D-Jggv^CP4-3SEAKLVxBV%9e(@;r=T0#omX<_pmgcQFXm3mmd;y$R;Me+s2+@6
z0jN(Ca2$G}ChsarTk3_|mkHaVrhIGeEREe)!G8e{g0F+e!H>Ydfqw^o1kIcZUkhR&
z13nIJ05^g!fv<z@;CtXna2RXF;XrG~R#1(uJPX7@3cUWp_7}E4^yM3_82&fN{r0Zy
z?b~k%$j<OBvN0+78Js(s`@VR%i!a<5PXh9BYS^~Pn}eG3N+#4N8@G>7*>25~FJ5rw
z__fiZte{cSF_IVNAdN*DWI#W-0DKDE0{%O=mUVs`coIAX{sm;$f9_ufe**s>%*P&B
z0PX{ig6{y?2s?kd^XZ+B?R@$hPv8CYV>f+bAiiPshSmHGkL}32?A*|DnR70~=}({Y
z^So)lKKa{u)AH6i8Qnu3l^>U<(6(kpYu@%H1^N1vSF*Ak$(w^#mt?+?x8}R{cqV7s
zej1-SoTQ!$_64VbCeRGR;5G0DXv4-k2b>4e;0ACHxDPxHehPj8ehpp)vI*Y+zXxxD
zU0@a`-46qcz~Nvi*aU6@H-lTiz2H&sZSc?F8Sv_}+h2X?)jMB(_SI+Yk8WPw{_IuH
zUUlbH7kK|VFX+4~JAXE;`0V&hivCtKTuvxwRxapOt_d7eDvt_kx@xcX7gg!E)7
zpRhKwSo|&HIQjwLXfTbxJ}Cp!!CG)SXa{G30dPLJ99#je2KR!Oz#HHl@cIj{KmPE2
zw|(ZKzS}Ok?K9`x)^yP+BPVzEDJ#<(KK!$svN^1AkDhhj1UY`aWJm5C6KIOO+8|5a
zU9*qOU2`@^-c_2mrKR)D_Iy6-aKH2Bn54u_C@E&P=BdWJ>|kTApU?O?#{3pE;}fg}
zr-M&|E5WCLe1)sPXTde#T5vts25tm5frIfS=7SyCvF7HL;KOslhY=|w9{wemZN$Tf
zZ13jb$zav*;{*QQ@b&2MZT7BoZ_^dM;iF5;9($Ye?PaET+pNWh78Sd3_RlLv`*3+Z
zJ_*|x4=-<S35S`dIXmY7Za^zI8$>`C*aU6{KLalUhrdWW1bhsf4L%QU2mc$q1P<aa
zl@10CVCW!7L8c^EGe8Ke0+)j;z&7wL@G#i<^QRtpfPYWj5%_oYQx9AeZ?pfzD|DJx
z{CVBat~+;pEt<_ap@qZ@cI(VLOS5zQj`L2>J&&_F^6Ck+z{FbS6X^>ks6Vfk$x@J4
zk3zveCzs`{-x2>G1&1;BD?k`r3#1Ef0;f2}EC&r>JxGHL_^;rfz-z$Q89TXu6TJG9
zNBQ@)&+Fe+{JU_|$5xt2UF^xpd&=(>1@`3VRbF2#%M(qkoccGL<42YMBX15@I`WPz
zb+|dk8yh!AUP`ml`e&5uY@KR*T&u*)(RdXff(`)ZEx`T<SAna+bs)G7q|xmcfs4T<
z;0mC%L2JTifYyYof!2iUfYyW?fYyYY!E4WbhyR}Y&La=paouH`AGjm-vGwl1dStI;
zqa?)lihnq#WW=bnmlgS*%hY+@N;P}CCEO>{vm+|MI_H=pF(0kZ?-_h+_G@{|iIX|&
z%(j|W(#Dfh`Xb3NyCe7PZWk?z=A<StJIIw!<^s9Q0UDR@g2%v5!871_@B*058omcO
z5F7;jb=~3qFt7+54vqp<;Al_{mV#yAG_V}hfLc%wLLdYB!610!`R_gd2LHbK{2LG6
zcgGu7ZoV=M{NK|NiG$~LuRZEFrh4_PoP9Rzj{juQ<9X8qy<HfTuDtafHC7Tw=M6|B
zqdQtweL*$8q|TVzE$Q&&mJ;euPHAG))R$aofqqPWu4JV%AC2>6r)fMd02hL-KzqUZ
z+y4>U!N1q^^snFgHws5&8}aa~V79{j`_6%YrD%8eOK1AF<;*;`<y6hV^Fglhf908{
z{^$3<@xD|20cs#SAM>tJ=!`#X<n2{%-H|PyZ$6vd(_Ut3r8(xB?xOkkUs~ndzrE&=
z`^%;+0Eb?4$CQQOu>08+y8pYy`+*tPe7E=mG*lmuu3la|*X)Cvc`L6aOS63*zRN}x
zZVDWDA33lbQ}K7Zip_E}BP)DUO_NEQl<75L(?i=*Kl@=E?PtzeRa6=#>|HgzEDbVX
zEOGUwX8F!tUoiD%#uPtw9#1jTNsax~nK6!8%Y6!T+220XP239FO^~Xq#l+3;cYU33
zxRx2FjS?Ny5F__UDi1XKzKMIX^rurz(H<o|?#&cp!ip|7ylgd#%_j4QUEd}&S<0r_
zdK}Y8duiLYuWpx``OAyUPQDT&-pG{H=b2W~c9<{9#Gu=la^|nyKKk&?lvAXVON~RR
z;-ZnI)UzbD`=va?AX}=+R4l*K%qps~-?DMr+SBr=%j;`D<I&-j*EhfZ6WU`z(JITG
zmFe?nd4{QlvL61atppruBmWk!Py3iTjNwd<29<C$sDz_IB^(W!X^t@K%$??#q9bg}
z)_$Rvt&~dHTDoknIn=_-)LOpCRAg$4Y6E#^j2H(8-mat74pTw7nY20bhy;;b7qd$R
zOY3#7@2ZGzrH=0D)1ogb+CV<f#lz1;mCbU?a?AJ?5e#1%jWqZwqkRw9lLj<yJy>VG
zAOW_5!RhRxajNRa2*lHR3(s5j47+u|0jj@@o!RU6Wp{;L`QL(OcGcE`)4?afmEcq0
zCU7wQaKHsXJ8zmQDTnVcNfID0drv#r`(S*&duZIP{BR?ipT1}B>3{Y<*jBzgLHe25
z*|MBK$leF*4BiLp&q4oH_m1L8F#o%}SDnQ<%G$OVj=!`_=u2!@fzN_#z_s9dunpV@
ze3_Xakeds+-|ETF&CqN=Mx}7bgYLNsX)YfMeDV13L6Hegwb*NjU%|bK#+eT#|0rpD
zS9`r3A{5-q_B~J9czVL}W#%|_=1Ci;&Y_Z9e5w=<2`>&*nOn@c_MO=KuY-eY@_W_4
zwlBH)GwuCI+xTfyJ<V&6Wz6tW(7T4FDQ!w1jTeFbHSLz=+~%QkqB_TG@BL20tnx0m
zf8~Mx&GwU!o12&Okh_0H-S8z?jzcp3H71QiHvUy4zRU`=hq>opme;{F4&M1!Ze9=B
z<aaL<%PF6`f4SSU%^6GQUZeUTS{Kg$!I(5mHt%wI9V~~*n@zKFJ=1?A9D1U<lpuOf
z$Fy<u=s0OZ<D@aRYAR>n|2pOJ=us<!dD4pV%ct9iJbKjDnI~<WIz66=Z@PwrkvbN0
z9-qwxrnmLZG{(XW9(EG?_`lq%fKDOnB&tp$>O`7OCFx{>-cG;ixNi@&Q?0iWnxD8v
zMss*SAYCP$gjs9k`cTC1;@TVnRJTsJ=q-oJY94Y>!8kx^defnKEBZbRJ_4G-Mc`WS
zIdCVq3)~GJ0{;ZQ34RUq9z=bZJukEChN0Q*_V*C`d%$oE9oumNxoC2SC@#jM!3VK^
zqqMD{=jG<$-)RE4-}l^QhK7dpcNH^n?TdF@N5V`~wnO_Iwh(h;Z&R{E63o`!4z?1A
zpT5JNK|E%!VzY-WXDBm;Smm!J+{cSABA!15!P(w(huHTB4a_u8s2PJNY|2b&iH7sE
zk|NvotQ{&~lL?b>{t|F0xB_VLlY{XLcpe<Ys4N22U@52t_27KqI~>#a+_;Nrgwr6@
z4TtY(NaS1h_uaN~;w0M80G$f@JY0=zT?a0rCl>>`-0Gpf#QSbmK37XzcosYdd~V29
zAI%ZD?mjn4=;=s^BgGTI<(l%byTIj-i#7yY-VP8e9!iG(4d~horqF4<QD`jN!z^7i
z(>$_tAM^OYZ1eK@b4)|~T=O-~R9}7Ee&(qI_BZoW2bv9==bLjY9rMTehnPb)Ei}cv
zK|FuO;pWAXBaBW<=-lDG$!fb*^@~%EHT$nS*60Mv_YXMHJkxoy(K-A#SJasM!YfQI
zf3$Vil+{LWt98moXJ_@-PKow)M(1)uQ`Z}923=aZ!E88TgPGd3!9>qL+vvQ++_S>w
zbG02t@53+LZ<D#bwAbjYpthlI8rW<u+d5!$HshXCFEBb`Q@&`(oYVSovvtlV%*%&e
zVg9w`N~3e2`kS)aGp{yZOkQJj!nS|K4d%JT4d(gg8_n&NpELjGoZF3#OX&pXmb&}Q
z5eGhKblUc<6TfA;TOKw#Lvrthj~bl<)d>Tg_xV)mW9H3;+l@|y>&)+~XMNA;&5qvh
zu0H#5^U8)FnR{!VG9_pH*tB2twE5-v|7wnQerj}5_jKo36FL4_qZ2(Z)x2o*R|z_S
zaAfx{%qe^P%IN&M-XZJ6LVM$D=IQd+%}e#K8=ZpeDEXb4y5%kNO3&M-YVj^R#&@Ha
zwH0+Un#kWavfD(YY8DF>33RV_?OJYz{Ml{HnIAe~&*3LO4=T%7HQGg6E{(yDcFrVj
z?d<z)0!cH#uVN*1{^jO!HC?f<@1WJcmyoWUcMVk)7f&sjQaYu$r1XmOjYIU1Uyp5w
zh&J|1d)etrliWl&K-faN+BHs)zKnW`&6Fuc#YNMm7Ef{KhNvCBhIHF%2JOyfl6^~K
zj$LG1-*akdv97$W*RZz}x4WIRlr00vrM66%ssa=jsUf>}-0e}wiFu~vF=e0J&+K@r
zm@mKEEaxnJ;&S1|6F;+}*bYxEENNhx7E4c4qGaZ=gd<}WqwA0oW0wK9H8-yCJ6R5t
zO}k^tL#*_dTypSI{ej&6_N(o(GPa_^h26PEj{!sMU1i69{5*}5FVBAb$Z*w}dY-;x
z*WN6>ry280<baLpi-i+O@$dam>Q2`Z`|JORie0<>30`B?BYpiyuKTtj!mLRc{W|Qn
zC;4q>Hn~sTHf&`%jFH2gY1+|mV6ODp_aB;jdRGz#aY`rbOic2QMYXx*LuQMuzb~7|
zrEHqHkobFfC-M@KU60;KP_N$kXjY|t@(bbn#({Uxx~Rr6^%oKI(kE`;`KRXYnfF{<
zW{y1k>(5ma_b>^PBc<OARPqiW%l|bX&HYCpGqa3L@&@J*O6@v?lJ;ssnUl*2RaYY+
zFG5TYA&!9ALMV&;GD3Ne(!|nww-T~~nY#$3zV9WJH}DXl=+NAd`C1S7)<y2`n(ISX
zd`ZD+@ITe#euTvT)QS6TIzDDV9jZ(H(WQIQeqrR^JzpxWACopZUsE#G8)hN#%O!e~
zDZc8HEvNaZG*r5=pHJ7PZk=YnkQIqJ>-aDs@ymf(@ts2zEZ5JXvv)TC?7Kzw{?27d
z{a+@6_ZkE7L7`R#g<3Nd`t)&IxC$I7aG=0}0tX5lC~%;_fdU5#94K(0z<~k>K7bs^
z=l{!(EdI$4e{yTphh|=X6aIhYpYE$CZpx^*K78*=Ab*{J{T|mx?^9kd1hfb6Nx-2-
za}Cg&JMA6F*S`bEm;VZoFMmJK+r9q=<oiDgRQFz^e0=%hHK|^wF%z}^t@b|U=W3ro
zq4wz%er5kXZ9ClN4G)F@(OwJQ`@X>pY7_V5-K*zq`u_%4TGWR6CBEpY28z=w7?rpP
zh~`^>{Piz;&q~w2$H-3@+N@%sAKlnuOVNBb%KHSNt=-=p(L2zw-#T>ZRjYjQFuQA^
z4;2zsxC$I7aG=0}0tX5lC~%;_fdU5#94K(0z<~k>{_Z&-|5N^@{7!j)@=fKn>V3U@
zY`v$~yLma9^26nm%g2^KDo;~Bz24!=cb8|W)3oy6N1x8ssaqYL;i#DPF6R?E;1I9?
zyu$&Og@lKJMc{C-7*v2Gz>%O590jU?+*0|^#{iX;|Icw9vkV*ujt3_Io$6KkNrWeZ
zQ^2W!qcmnYr~yiU8`OLEdKNwimrly*?|~f?vZr`boPyh(YaXXZd_GBrrcReMx%)N*
zE9`^!^VFQxm*~ubB8R-VW9(@-_b;ivsND+o;_oiizT{TnWC|ZjrU$)qT<h#<qbO%a
zlAJ`+-!{9anI=<@@*F_>MTBZw*JR68N!YliaPCm8>a?PG-@qtzTACE&pQv*4=K5Vs
z`{H;hm~8txd*YveoHC~8yGPFn9{+9UC)t0UTl3p5GIjJ;XUUrRTkVZX*{y3Iw3pxZ
zWc#lM&fBe4#?Sn2+8@8h-AjEh?Mrq)D7r4lr^3C<fg(n~gauwtqjk5|=$vQMocd&>
zU;jHIYZ|O+)p<3d?3~tpm7iX9g89RTAN+I9wcVQ;h1?Ty;4iuU4^_6tk7NCBgs4Yd
zGXeW;_)97i(V8p0u>QZd^<Vm5L-CJp|Gyi3{}K2izrgng6s{)j-PHBBTE<`hCmR2P
zjqtZRg71wkjsF%P9WVqW2e$(G6M84FXQjQ@_s^=M@CF(t{Ec0I4gXKFuvkA_1^>_G
g!+ZG+YJlCX=dW%57tSBCAIe6m^l&ZsOP@db55$o82LJ#7
literal 0
HcmV?d00001
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/misc.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/misc.h
new file mode 100644
index 0000000..7d401ca
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/misc.h
@@ -0,0 +1,220 @@
+/**
+ ******************************************************************************
+ * @file misc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the miscellaneous
+ * firmware library functions (add-on to CMSIS functions).
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MISC_H
+#define __MISC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup MISC
+ * @{
+ */
+
+/** @defgroup MISC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief NVIC Init Structure definition
+ */
+
+typedef struct
+{
+ uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled.
+ This parameter can be a value of @ref IRQn_Type
+ (For the complete STM32 Devices IRQ Channels list, please
+ refer to stm32f10x.h file) */
+
+ uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel
+ specified in NVIC_IRQChannel. This parameter can be a value
+ between 0 and 15 as described in the table @ref NVIC_Priority_Table */
+
+ uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified
+ in NVIC_IRQChannel. This parameter can be a value
+ between 0 and 15 as described in the table @ref NVIC_Priority_Table */
+
+ FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel
+ will be enabled or disabled.
+ This parameter can be set either to ENABLE or DISABLE */
+} NVIC_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup NVIC_Priority_Table
+ * @{
+ */
+
+/**
+@code
+ The table below gives the allowed values of the pre-emption priority and subpriority according
+ to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function
+ ============================================================================================================================
+ NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description
+ ============================================================================================================================
+ NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority
+ | | | 4 bits for subpriority
+ ----------------------------------------------------------------------------------------------------------------------------
+ NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority
+ | | | 3 bits for subpriority
+ ----------------------------------------------------------------------------------------------------------------------------
+ NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority
+ | | | 2 bits for subpriority
+ ----------------------------------------------------------------------------------------------------------------------------
+ NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority
+ | | | 1 bits for subpriority
+ ----------------------------------------------------------------------------------------------------------------------------
+ NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority
+ | | | 0 bits for subpriority
+ ============================================================================================================================
+@endcode
+*/
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup Vector_Table_Base
+ * @{
+ */
+
+#define NVIC_VectTab_RAM ((uint32_t)0x20000000)
+#define NVIC_VectTab_FLASH ((uint32_t)0x08000000)
+#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \
+ ((VECTTAB) == NVIC_VectTab_FLASH))
+/**
+ * @}
+ */
+
+/** @defgroup System_Low_Power
+ * @{
+ */
+
+#define NVIC_LP_SEVONPEND ((uint8_t)0x10)
+#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04)
+#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02)
+#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \
+ ((LP) == NVIC_LP_SLEEPDEEP) || \
+ ((LP) == NVIC_LP_SLEEPONEXIT))
+/**
+ * @}
+ */
+
+/** @defgroup Preemption_Priority_Group
+ * @{
+ */
+
+#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority
+ 4 bits for subpriority */
+#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority
+ 3 bits for subpriority */
+#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority
+ 2 bits for subpriority */
+#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority
+ 1 bits for subpriority */
+#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority
+ 0 bits for subpriority */
+
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \
+ ((GROUP) == NVIC_PriorityGroup_1) || \
+ ((GROUP) == NVIC_PriorityGroup_2) || \
+ ((GROUP) == NVIC_PriorityGroup_3) || \
+ ((GROUP) == NVIC_PriorityGroup_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup SysTick_clock_source
+ * @{
+ */
+
+#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB)
+#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004)
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \
+ ((SOURCE) == SysTick_CLKSource_HCLK_Div8))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Exported_Functions
+ * @{
+ */
+
+void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup);
+void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct);
+void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset);
+void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState);
+void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MISC_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h
new file mode 100644
index 0000000..d1b2653
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h
@@ -0,0 +1,483 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_adc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the ADC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_ADC_H
+#define __STM32F10x_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup ADC
+ * @{
+ */
+
+/** @defgroup ADC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief ADC Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t ADC_Mode; /*!< Configures the ADC to operate in independent or
+ dual mode.
+ This parameter can be a value of @ref ADC_mode */
+
+ FunctionalState ADC_ScanConvMode; /*!< Specifies whether the conversion is performed in
+ Scan (multichannels) or Single (one channel) mode.
+ This parameter can be set to ENABLE or DISABLE */
+
+ FunctionalState ADC_ContinuousConvMode; /*!< Specifies whether the conversion is performed in
+ Continuous or Single mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t ADC_ExternalTrigConv; /*!< Defines the external trigger used to start the analog
+ to digital conversion of regular channels. This parameter
+ can be a value of @ref ADC_external_trigger_sources_for_regular_channels_conversion */
+
+ uint32_t ADC_DataAlign; /*!< Specifies whether the ADC data alignment is left or right.
+ This parameter can be a value of @ref ADC_data_align */
+
+ uint8_t ADC_NbrOfChannel; /*!< Specifies the number of ADC channels that will be converted
+ using the sequencer for regular channel group.
+ This parameter must range from 1 to 16. */
+}ADC_InitTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Constants
+ * @{
+ */
+
+#define IS_ADC_ALL_PERIPH(PERIPH) (((PERIPH) == ADC1) || \
+ ((PERIPH) == ADC2) || \
+ ((PERIPH) == ADC3))
+
+#define IS_ADC_DMA_PERIPH(PERIPH) (((PERIPH) == ADC1) || \
+ ((PERIPH) == ADC3))
+
+/** @defgroup ADC_mode
+ * @{
+ */
+
+#define ADC_Mode_Independent ((uint32_t)0x00000000)
+#define ADC_Mode_RegInjecSimult ((uint32_t)0x00010000)
+#define ADC_Mode_RegSimult_AlterTrig ((uint32_t)0x00020000)
+#define ADC_Mode_InjecSimult_FastInterl ((uint32_t)0x00030000)
+#define ADC_Mode_InjecSimult_SlowInterl ((uint32_t)0x00040000)
+#define ADC_Mode_InjecSimult ((uint32_t)0x00050000)
+#define ADC_Mode_RegSimult ((uint32_t)0x00060000)
+#define ADC_Mode_FastInterl ((uint32_t)0x00070000)
+#define ADC_Mode_SlowInterl ((uint32_t)0x00080000)
+#define ADC_Mode_AlterTrig ((uint32_t)0x00090000)
+
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \
+ ((MODE) == ADC_Mode_RegInjecSimult) || \
+ ((MODE) == ADC_Mode_RegSimult_AlterTrig) || \
+ ((MODE) == ADC_Mode_InjecSimult_FastInterl) || \
+ ((MODE) == ADC_Mode_InjecSimult_SlowInterl) || \
+ ((MODE) == ADC_Mode_InjecSimult) || \
+ ((MODE) == ADC_Mode_RegSimult) || \
+ ((MODE) == ADC_Mode_FastInterl) || \
+ ((MODE) == ADC_Mode_SlowInterl) || \
+ ((MODE) == ADC_Mode_AlterTrig))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_external_trigger_sources_for_regular_channels_conversion
+ * @{
+ */
+
+#define ADC_ExternalTrigConv_T1_CC1 ((uint32_t)0x00000000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T1_CC2 ((uint32_t)0x00020000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T2_CC2 ((uint32_t)0x00060000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T3_TRGO ((uint32_t)0x00080000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T4_CC4 ((uint32_t)0x000A0000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO ((uint32_t)0x000C0000) /*!< For ADC1 and ADC2 */
+
+#define ADC_ExternalTrigConv_T1_CC3 ((uint32_t)0x00040000) /*!< For ADC1, ADC2 and ADC3 */
+#define ADC_ExternalTrigConv_None ((uint32_t)0x000E0000) /*!< For ADC1, ADC2 and ADC3 */
+
+#define ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x00000000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T2_CC3 ((uint32_t)0x00020000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T8_CC1 ((uint32_t)0x00060000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T8_TRGO ((uint32_t)0x00080000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T5_CC1 ((uint32_t)0x000A0000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T5_CC3 ((uint32_t)0x000C0000) /*!< For ADC3 only */
+
+#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_None) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \
+ ((REGTRIG) == ADC_ExternalTrigConv_T5_CC3))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_data_align
+ * @{
+ */
+
+#define ADC_DataAlign_Right ((uint32_t)0x00000000)
+#define ADC_DataAlign_Left ((uint32_t)0x00000800)
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \
+ ((ALIGN) == ADC_DataAlign_Left))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_channels
+ * @{
+ */
+
+#define ADC_Channel_0 ((uint8_t)0x00)
+#define ADC_Channel_1 ((uint8_t)0x01)
+#define ADC_Channel_2 ((uint8_t)0x02)
+#define ADC_Channel_3 ((uint8_t)0x03)
+#define ADC_Channel_4 ((uint8_t)0x04)
+#define ADC_Channel_5 ((uint8_t)0x05)
+#define ADC_Channel_6 ((uint8_t)0x06)
+#define ADC_Channel_7 ((uint8_t)0x07)
+#define ADC_Channel_8 ((uint8_t)0x08)
+#define ADC_Channel_9 ((uint8_t)0x09)
+#define ADC_Channel_10 ((uint8_t)0x0A)
+#define ADC_Channel_11 ((uint8_t)0x0B)
+#define ADC_Channel_12 ((uint8_t)0x0C)
+#define ADC_Channel_13 ((uint8_t)0x0D)
+#define ADC_Channel_14 ((uint8_t)0x0E)
+#define ADC_Channel_15 ((uint8_t)0x0F)
+#define ADC_Channel_16 ((uint8_t)0x10)
+#define ADC_Channel_17 ((uint8_t)0x11)
+
+#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_16)
+#define ADC_Channel_Vrefint ((uint8_t)ADC_Channel_17)
+
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || ((CHANNEL) == ADC_Channel_1) || \
+ ((CHANNEL) == ADC_Channel_2) || ((CHANNEL) == ADC_Channel_3) || \
+ ((CHANNEL) == ADC_Channel_4) || ((CHANNEL) == ADC_Channel_5) || \
+ ((CHANNEL) == ADC_Channel_6) || ((CHANNEL) == ADC_Channel_7) || \
+ ((CHANNEL) == ADC_Channel_8) || ((CHANNEL) == ADC_Channel_9) || \
+ ((CHANNEL) == ADC_Channel_10) || ((CHANNEL) == ADC_Channel_11) || \
+ ((CHANNEL) == ADC_Channel_12) || ((CHANNEL) == ADC_Channel_13) || \
+ ((CHANNEL) == ADC_Channel_14) || ((CHANNEL) == ADC_Channel_15) || \
+ ((CHANNEL) == ADC_Channel_16) || ((CHANNEL) == ADC_Channel_17))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_sampling_time
+ * @{
+ */
+
+#define ADC_SampleTime_1Cycles5 ((uint8_t)0x00)
+#define ADC_SampleTime_7Cycles5 ((uint8_t)0x01)
+#define ADC_SampleTime_13Cycles5 ((uint8_t)0x02)
+#define ADC_SampleTime_28Cycles5 ((uint8_t)0x03)
+#define ADC_SampleTime_41Cycles5 ((uint8_t)0x04)
+#define ADC_SampleTime_55Cycles5 ((uint8_t)0x05)
+#define ADC_SampleTime_71Cycles5 ((uint8_t)0x06)
+#define ADC_SampleTime_239Cycles5 ((uint8_t)0x07)
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_1Cycles5) || \
+ ((TIME) == ADC_SampleTime_7Cycles5) || \
+ ((TIME) == ADC_SampleTime_13Cycles5) || \
+ ((TIME) == ADC_SampleTime_28Cycles5) || \
+ ((TIME) == ADC_SampleTime_41Cycles5) || \
+ ((TIME) == ADC_SampleTime_55Cycles5) || \
+ ((TIME) == ADC_SampleTime_71Cycles5) || \
+ ((TIME) == ADC_SampleTime_239Cycles5))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_external_trigger_sources_for_injected_channels_conversion
+ * @{
+ */
+
+#define ADC_ExternalTrigInjecConv_T2_TRGO ((uint32_t)0x00002000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_T2_CC1 ((uint32_t)0x00003000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_T3_CC4 ((uint32_t)0x00004000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_T4_TRGO ((uint32_t)0x00005000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 ((uint32_t)0x00006000) /*!< For ADC1 and ADC2 */
+
+#define ADC_ExternalTrigInjecConv_T1_TRGO ((uint32_t)0x00000000) /*!< For ADC1, ADC2 and ADC3 */
+#define ADC_ExternalTrigInjecConv_T1_CC4 ((uint32_t)0x00001000) /*!< For ADC1, ADC2 and ADC3 */
+#define ADC_ExternalTrigInjecConv_None ((uint32_t)0x00007000) /*!< For ADC1, ADC2 and ADC3 */
+
+#define ADC_ExternalTrigInjecConv_T4_CC3 ((uint32_t)0x00002000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T8_CC2 ((uint32_t)0x00003000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T8_CC4 ((uint32_t)0x00004000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T5_TRGO ((uint32_t)0x00005000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T5_CC4 ((uint32_t)0x00006000) /*!< For ADC3 only */
+
+#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_None) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \
+ ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_channel_selection
+ * @{
+ */
+
+#define ADC_InjectedChannel_1 ((uint8_t)0x14)
+#define ADC_InjectedChannel_2 ((uint8_t)0x18)
+#define ADC_InjectedChannel_3 ((uint8_t)0x1C)
+#define ADC_InjectedChannel_4 ((uint8_t)0x20)
+#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \
+ ((CHANNEL) == ADC_InjectedChannel_2) || \
+ ((CHANNEL) == ADC_InjectedChannel_3) || \
+ ((CHANNEL) == ADC_InjectedChannel_4))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_analog_watchdog_selection
+ * @{
+ */
+
+#define ADC_AnalogWatchdog_SingleRegEnable ((uint32_t)0x00800200)
+#define ADC_AnalogWatchdog_SingleInjecEnable ((uint32_t)0x00400200)
+#define ADC_AnalogWatchdog_SingleRegOrInjecEnable ((uint32_t)0x00C00200)
+#define ADC_AnalogWatchdog_AllRegEnable ((uint32_t)0x00800000)
+#define ADC_AnalogWatchdog_AllInjecEnable ((uint32_t)0x00400000)
+#define ADC_AnalogWatchdog_AllRegAllInjecEnable ((uint32_t)0x00C00000)
+#define ADC_AnalogWatchdog_None ((uint32_t)0x00000000)
+
+#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \
+ ((WATCHDOG) == ADC_AnalogWatchdog_None))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_interrupts_definition
+ * @{
+ */
+
+#define ADC_IT_EOC ((uint16_t)0x0220)
+#define ADC_IT_AWD ((uint16_t)0x0140)
+#define ADC_IT_JEOC ((uint16_t)0x0480)
+
+#define IS_ADC_IT(IT) ((((IT) & (uint16_t)0xF81F) == 0x00) && ((IT) != 0x00))
+
+#define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \
+ ((IT) == ADC_IT_JEOC))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_flags_definition
+ * @{
+ */
+
+#define ADC_FLAG_AWD ((uint8_t)0x01)
+#define ADC_FLAG_EOC ((uint8_t)0x02)
+#define ADC_FLAG_JEOC ((uint8_t)0x04)
+#define ADC_FLAG_JSTRT ((uint8_t)0x08)
+#define ADC_FLAG_STRT ((uint8_t)0x10)
+#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xE0) == 0x00) && ((FLAG) != 0x00))
+#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC) || \
+ ((FLAG) == ADC_FLAG_JEOC) || ((FLAG)== ADC_FLAG_JSTRT) || \
+ ((FLAG) == ADC_FLAG_STRT))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_thresholds
+ * @{
+ */
+
+#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_offset
+ * @{
+ */
+
+#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_length
+ * @{
+ */
+
+#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4))
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_rank
+ * @{
+ */
+
+#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ADC_regular_length
+ * @{
+ */
+
+#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_rank
+ * @{
+ */
+
+#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10))
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_discontinuous_mode_number
+ * @{
+ */
+
+#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Functions
+ * @{
+ */
+
+void ADC_DeInit(ADC_TypeDef* ADCx);
+void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct);
+void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct);
+void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState);
+void ADC_ResetCalibration(ADC_TypeDef* ADCx);
+FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx);
+void ADC_StartCalibration(ADC_TypeDef* ADCx);
+FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx);
+void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx);
+void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number);
+void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime);
+void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx);
+uint32_t ADC_GetDualModeConversionValue(void);
+void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv);
+void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx);
+void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime);
+void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length);
+void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset);
+uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel);
+void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog);
+void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, uint16_t LowThreshold);
+void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel);
+void ADC_TempSensorVrefintCmd(FunctionalState NewState);
+FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG);
+void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG);
+ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT);
+void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_ADC_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_bkp.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_bkp.h
new file mode 100644
index 0000000..b620753
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_bkp.h
@@ -0,0 +1,195 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_bkp.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the BKP firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_BKP_H
+#define __STM32F10x_BKP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup BKP
+ * @{
+ */
+
+/** @defgroup BKP_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Exported_Constants
+ * @{
+ */
+
+/** @defgroup Tamper_Pin_active_level
+ * @{
+ */
+
+#define BKP_TamperPinLevel_High ((uint16_t)0x0000)
+#define BKP_TamperPinLevel_Low ((uint16_t)0x0001)
+#define IS_BKP_TAMPER_PIN_LEVEL(LEVEL) (((LEVEL) == BKP_TamperPinLevel_High) || \
+ ((LEVEL) == BKP_TamperPinLevel_Low))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_output_source_to_output_on_the_Tamper_pin
+ * @{
+ */
+
+#define BKP_RTCOutputSource_None ((uint16_t)0x0000)
+#define BKP_RTCOutputSource_CalibClock ((uint16_t)0x0080)
+#define BKP_RTCOutputSource_Alarm ((uint16_t)0x0100)
+#define BKP_RTCOutputSource_Second ((uint16_t)0x0300)
+#define IS_BKP_RTC_OUTPUT_SOURCE(SOURCE) (((SOURCE) == BKP_RTCOutputSource_None) || \
+ ((SOURCE) == BKP_RTCOutputSource_CalibClock) || \
+ ((SOURCE) == BKP_RTCOutputSource_Alarm) || \
+ ((SOURCE) == BKP_RTCOutputSource_Second))
+/**
+ * @}
+ */
+
+/** @defgroup Data_Backup_Register
+ * @{
+ */
+
+#define BKP_DR1 ((uint16_t)0x0004)
+#define BKP_DR2 ((uint16_t)0x0008)
+#define BKP_DR3 ((uint16_t)0x000C)
+#define BKP_DR4 ((uint16_t)0x0010)
+#define BKP_DR5 ((uint16_t)0x0014)
+#define BKP_DR6 ((uint16_t)0x0018)
+#define BKP_DR7 ((uint16_t)0x001C)
+#define BKP_DR8 ((uint16_t)0x0020)
+#define BKP_DR9 ((uint16_t)0x0024)
+#define BKP_DR10 ((uint16_t)0x0028)
+#define BKP_DR11 ((uint16_t)0x0040)
+#define BKP_DR12 ((uint16_t)0x0044)
+#define BKP_DR13 ((uint16_t)0x0048)
+#define BKP_DR14 ((uint16_t)0x004C)
+#define BKP_DR15 ((uint16_t)0x0050)
+#define BKP_DR16 ((uint16_t)0x0054)
+#define BKP_DR17 ((uint16_t)0x0058)
+#define BKP_DR18 ((uint16_t)0x005C)
+#define BKP_DR19 ((uint16_t)0x0060)
+#define BKP_DR20 ((uint16_t)0x0064)
+#define BKP_DR21 ((uint16_t)0x0068)
+#define BKP_DR22 ((uint16_t)0x006C)
+#define BKP_DR23 ((uint16_t)0x0070)
+#define BKP_DR24 ((uint16_t)0x0074)
+#define BKP_DR25 ((uint16_t)0x0078)
+#define BKP_DR26 ((uint16_t)0x007C)
+#define BKP_DR27 ((uint16_t)0x0080)
+#define BKP_DR28 ((uint16_t)0x0084)
+#define BKP_DR29 ((uint16_t)0x0088)
+#define BKP_DR30 ((uint16_t)0x008C)
+#define BKP_DR31 ((uint16_t)0x0090)
+#define BKP_DR32 ((uint16_t)0x0094)
+#define BKP_DR33 ((uint16_t)0x0098)
+#define BKP_DR34 ((uint16_t)0x009C)
+#define BKP_DR35 ((uint16_t)0x00A0)
+#define BKP_DR36 ((uint16_t)0x00A4)
+#define BKP_DR37 ((uint16_t)0x00A8)
+#define BKP_DR38 ((uint16_t)0x00AC)
+#define BKP_DR39 ((uint16_t)0x00B0)
+#define BKP_DR40 ((uint16_t)0x00B4)
+#define BKP_DR41 ((uint16_t)0x00B8)
+#define BKP_DR42 ((uint16_t)0x00BC)
+
+#define IS_BKP_DR(DR) (((DR) == BKP_DR1) || ((DR) == BKP_DR2) || ((DR) == BKP_DR3) || \
+ ((DR) == BKP_DR4) || ((DR) == BKP_DR5) || ((DR) == BKP_DR6) || \
+ ((DR) == BKP_DR7) || ((DR) == BKP_DR8) || ((DR) == BKP_DR9) || \
+ ((DR) == BKP_DR10) || ((DR) == BKP_DR11) || ((DR) == BKP_DR12) || \
+ ((DR) == BKP_DR13) || ((DR) == BKP_DR14) || ((DR) == BKP_DR15) || \
+ ((DR) == BKP_DR16) || ((DR) == BKP_DR17) || ((DR) == BKP_DR18) || \
+ ((DR) == BKP_DR19) || ((DR) == BKP_DR20) || ((DR) == BKP_DR21) || \
+ ((DR) == BKP_DR22) || ((DR) == BKP_DR23) || ((DR) == BKP_DR24) || \
+ ((DR) == BKP_DR25) || ((DR) == BKP_DR26) || ((DR) == BKP_DR27) || \
+ ((DR) == BKP_DR28) || ((DR) == BKP_DR29) || ((DR) == BKP_DR30) || \
+ ((DR) == BKP_DR31) || ((DR) == BKP_DR32) || ((DR) == BKP_DR33) || \
+ ((DR) == BKP_DR34) || ((DR) == BKP_DR35) || ((DR) == BKP_DR36) || \
+ ((DR) == BKP_DR37) || ((DR) == BKP_DR38) || ((DR) == BKP_DR39) || \
+ ((DR) == BKP_DR40) || ((DR) == BKP_DR41) || ((DR) == BKP_DR42))
+
+#define IS_BKP_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x7F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Exported_Functions
+ * @{
+ */
+
+void BKP_DeInit(void);
+void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel);
+void BKP_TamperPinCmd(FunctionalState NewState);
+void BKP_ITConfig(FunctionalState NewState);
+void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource);
+void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue);
+void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data);
+uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR);
+FlagStatus BKP_GetFlagStatus(void);
+void BKP_ClearFlag(void);
+ITStatus BKP_GetITStatus(void);
+void BKP_ClearITPendingBit(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_BKP_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_can.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_can.h
new file mode 100644
index 0000000..648f747
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_can.h
@@ -0,0 +1,697 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_can.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the CAN firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CAN_H
+#define __STM32F10x_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup CAN
+ * @{
+ */
+
+/** @defgroup CAN_Exported_Types
+ * @{
+ */
+
+#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN1) || \
+ ((PERIPH) == CAN2))
+
+/**
+ * @brief CAN init structure definition
+ */
+
+typedef struct
+{
+ uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum.
+ It ranges from 1 to 1024. */
+
+ uint8_t CAN_Mode; /*!< Specifies the CAN operating mode.
+ This parameter can be a value of
+ @ref CAN_operating_mode */
+
+ uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta
+ the CAN hardware is allowed to lengthen or
+ shorten a bit to perform resynchronization.
+ This parameter can be a value of
+ @ref CAN_synchronisation_jump_width */
+
+ uint8_t CAN_BS1; /*!< Specifies the number of time quanta in Bit
+ Segment 1. This parameter can be a value of
+ @ref CAN_time_quantum_in_bit_segment_1 */
+
+ uint8_t CAN_BS2; /*!< Specifies the number of time quanta in Bit
+ Segment 2.
+ This parameter can be a value of
+ @ref CAN_time_quantum_in_bit_segment_2 */
+
+ FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered
+ communication mode. This parameter can be set
+ either to ENABLE or DISABLE. */
+
+ FunctionalState CAN_ABOM; /*!< Enable or disable the automatic bus-off
+ management. This parameter can be set either
+ to ENABLE or DISABLE. */
+
+ FunctionalState CAN_AWUM; /*!< Enable or disable the automatic wake-up mode.
+ This parameter can be set either to ENABLE or
+ DISABLE. */
+
+ FunctionalState CAN_NART; /*!< Enable or disable the no-automatic
+ retransmission mode. This parameter can be
+ set either to ENABLE or DISABLE. */
+
+ FunctionalState CAN_RFLM; /*!< Enable or disable the Receive FIFO Locked mode.
+ This parameter can be set either to ENABLE
+ or DISABLE. */
+
+ FunctionalState CAN_TXFP; /*!< Enable or disable the transmit FIFO priority.
+ This parameter can be set either to ENABLE
+ or DISABLE. */
+} CAN_InitTypeDef;
+
+/**
+ * @brief CAN filter init structure definition
+ */
+
+typedef struct
+{
+ uint16_t CAN_FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
+ configuration, first one for a 16-bit configuration).
+ This parameter can be a value between 0x0000 and 0xFFFF */
+
+ uint16_t CAN_FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
+ configuration, second one for a 16-bit configuration).
+ This parameter can be a value between 0x0000 and 0xFFFF */
+
+ uint16_t CAN_FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
+ according to the mode (MSBs for a 32-bit configuration,
+ first one for a 16-bit configuration).
+ This parameter can be a value between 0x0000 and 0xFFFF */
+
+ uint16_t CAN_FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
+ according to the mode (LSBs for a 32-bit configuration,
+ second one for a 16-bit configuration).
+ This parameter can be a value between 0x0000 and 0xFFFF */
+
+ uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+ This parameter can be a value of @ref CAN_filter_FIFO */
+
+ uint8_t CAN_FilterNumber; /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */
+
+ uint8_t CAN_FilterMode; /*!< Specifies the filter mode to be initialized.
+ This parameter can be a value of @ref CAN_filter_mode */
+
+ uint8_t CAN_FilterScale; /*!< Specifies the filter scale.
+ This parameter can be a value of @ref CAN_filter_scale */
+
+ FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter.
+ This parameter can be set either to ENABLE or DISABLE. */
+} CAN_FilterInitTypeDef;
+
+/**
+ * @brief CAN Tx message structure definition
+ */
+
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter can be a value between 0 to 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter can be a value between 0 to 0x1FFFFFFF. */
+
+ uint8_t IDE; /*!< Specifies the type of identifier for the message that
+ will be transmitted. This parameter can be a value
+ of @ref CAN_identifier_type */
+
+ uint8_t RTR; /*!< Specifies the type of frame for the message that will
+ be transmitted. This parameter can be a value of
+ @ref CAN_remote_transmission_request */
+
+ uint8_t DLC; /*!< Specifies the length of the frame that will be
+ transmitted. This parameter can be a value between
+ 0 to 8 */
+
+ uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0
+ to 0xFF. */
+} CanTxMsg;
+
+/**
+ * @brief CAN Rx message structure definition
+ */
+
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter can be a value between 0 to 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter can be a value between 0 to 0x1FFFFFFF. */
+
+ uint8_t IDE; /*!< Specifies the type of identifier for the message that
+ will be received. This parameter can be a value of
+ @ref CAN_identifier_type */
+
+ uint8_t RTR; /*!< Specifies the type of frame for the received message.
+ This parameter can be a value of
+ @ref CAN_remote_transmission_request */
+
+ uint8_t DLC; /*!< Specifies the length of the frame that will be received.
+ This parameter can be a value between 0 to 8 */
+
+ uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to
+ 0xFF. */
+
+ uint8_t FMI; /*!< Specifies the index of the filter the message stored in
+ the mailbox passes through. This parameter can be a
+ value between 0 to 0xFF */
+} CanRxMsg;
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Exported_Constants
+ * @{
+ */
+
+/** @defgroup CAN_sleep_constants
+ * @{
+ */
+
+#define CAN_InitStatus_Failed ((uint8_t)0x00) /*!< CAN initialization failed */
+#define CAN_InitStatus_Success ((uint8_t)0x01) /*!< CAN initialization OK */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Mode
+ * @{
+ */
+
+#define CAN_Mode_Normal ((uint8_t)0x00) /*!< normal mode */
+#define CAN_Mode_LoopBack ((uint8_t)0x01) /*!< loopback mode */
+#define CAN_Mode_Silent ((uint8_t)0x02) /*!< silent mode */
+#define CAN_Mode_Silent_LoopBack ((uint8_t)0x03) /*!< loopback combined with silent mode */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \
+ ((MODE) == CAN_Mode_LoopBack)|| \
+ ((MODE) == CAN_Mode_Silent) || \
+ ((MODE) == CAN_Mode_Silent_LoopBack))
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup CAN_Operating_Mode
+ * @{
+ */
+#define CAN_OperatingMode_Initialization ((uint8_t)0x00) /*!< Initialization mode */
+#define CAN_OperatingMode_Normal ((uint8_t)0x01) /*!< Normal mode */
+#define CAN_OperatingMode_Sleep ((uint8_t)0x02) /*!< sleep mode */
+
+
+#define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\
+ ((MODE) == CAN_OperatingMode_Normal)|| \
+ ((MODE) == CAN_OperatingMode_Sleep))
+/**
+ * @}
+ */
+
+/**
+ * @defgroup CAN_Mode_Status
+ * @{
+ */
+
+#define CAN_ModeStatus_Failed ((uint8_t)0x00) /*!< CAN entering the specific mode failed */
+#define CAN_ModeStatus_Success ((uint8_t)!CAN_ModeStatus_Failed) /*!< CAN entering the specific mode Succeed */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_synchronisation_jump_width
+ * @{
+ */
+
+#define CAN_SJW_1tq ((uint8_t)0x00) /*!< 1 time quantum */
+#define CAN_SJW_2tq ((uint8_t)0x01) /*!< 2 time quantum */
+#define CAN_SJW_3tq ((uint8_t)0x02) /*!< 3 time quantum */
+#define CAN_SJW_4tq ((uint8_t)0x03) /*!< 4 time quantum */
+
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \
+ ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1
+ * @{
+ */
+
+#define CAN_BS1_1tq ((uint8_t)0x00) /*!< 1 time quantum */
+#define CAN_BS1_2tq ((uint8_t)0x01) /*!< 2 time quantum */
+#define CAN_BS1_3tq ((uint8_t)0x02) /*!< 3 time quantum */
+#define CAN_BS1_4tq ((uint8_t)0x03) /*!< 4 time quantum */
+#define CAN_BS1_5tq ((uint8_t)0x04) /*!< 5 time quantum */
+#define CAN_BS1_6tq ((uint8_t)0x05) /*!< 6 time quantum */
+#define CAN_BS1_7tq ((uint8_t)0x06) /*!< 7 time quantum */
+#define CAN_BS1_8tq ((uint8_t)0x07) /*!< 8 time quantum */
+#define CAN_BS1_9tq ((uint8_t)0x08) /*!< 9 time quantum */
+#define CAN_BS1_10tq ((uint8_t)0x09) /*!< 10 time quantum */
+#define CAN_BS1_11tq ((uint8_t)0x0A) /*!< 11 time quantum */
+#define CAN_BS1_12tq ((uint8_t)0x0B) /*!< 12 time quantum */
+#define CAN_BS1_13tq ((uint8_t)0x0C) /*!< 13 time quantum */
+#define CAN_BS1_14tq ((uint8_t)0x0D) /*!< 14 time quantum */
+#define CAN_BS1_15tq ((uint8_t)0x0E) /*!< 15 time quantum */
+#define CAN_BS1_16tq ((uint8_t)0x0F) /*!< 16 time quantum */
+
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2
+ * @{
+ */
+
+#define CAN_BS2_1tq ((uint8_t)0x00) /*!< 1 time quantum */
+#define CAN_BS2_2tq ((uint8_t)0x01) /*!< 2 time quantum */
+#define CAN_BS2_3tq ((uint8_t)0x02) /*!< 3 time quantum */
+#define CAN_BS2_4tq ((uint8_t)0x03) /*!< 4 time quantum */
+#define CAN_BS2_5tq ((uint8_t)0x04) /*!< 5 time quantum */
+#define CAN_BS2_6tq ((uint8_t)0x05) /*!< 6 time quantum */
+#define CAN_BS2_7tq ((uint8_t)0x06) /*!< 7 time quantum */
+#define CAN_BS2_8tq ((uint8_t)0x07) /*!< 8 time quantum */
+
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq)
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_clock_prescaler
+ * @{
+ */
+
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_number
+ * @{
+ */
+#ifndef STM32F10X_CL
+ #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13)
+#else
+ #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+#endif /* STM32F10X_CL */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_mode
+ * @{
+ */
+
+#define CAN_FilterMode_IdMask ((uint8_t)0x00) /*!< identifier/mask mode */
+#define CAN_FilterMode_IdList ((uint8_t)0x01) /*!< identifier list mode */
+
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \
+ ((MODE) == CAN_FilterMode_IdList))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_scale
+ * @{
+ */
+
+#define CAN_FilterScale_16bit ((uint8_t)0x00) /*!< Two 16-bit filters */
+#define CAN_FilterScale_32bit ((uint8_t)0x01) /*!< One 32-bit filter */
+
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \
+ ((SCALE) == CAN_FilterScale_32bit))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_FIFO
+ * @{
+ */
+
+#define CAN_Filter_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_Filter_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \
+ ((FIFO) == CAN_FilterFIFO1))
+/**
+ * @}
+ */
+
+/** @defgroup Start_bank_filter_for_slave_CAN
+ * @{
+ */
+#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Tx
+ * @{
+ */
+
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_identifier_type
+ * @{
+ */
+
+#define CAN_Id_Standard ((uint32_t)0x00000000) /*!< Standard Id */
+#define CAN_Id_Extended ((uint32_t)0x00000004) /*!< Extended Id */
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \
+ ((IDTYPE) == CAN_Id_Extended))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_remote_transmission_request
+ * @{
+ */
+
+#define CAN_RTR_Data ((uint32_t)0x00000000) /*!< Data frame */
+#define CAN_RTR_Remote ((uint32_t)0x00000002) /*!< Remote frame */
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_transmit_constants
+ * @{
+ */
+
+#define CAN_TxStatus_Failed ((uint8_t)0x00)/*!< CAN transmission failed */
+#define CAN_TxStatus_Ok ((uint8_t)0x01) /*!< CAN transmission succeeded */
+#define CAN_TxStatus_Pending ((uint8_t)0x02) /*!< CAN transmission pending */
+#define CAN_TxStatus_NoMailBox ((uint8_t)0x04) /*!< CAN cell did not provide an empty mailbox */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_receive_FIFO_number_constants
+ * @{
+ */
+
+#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
+
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_sleep_constants
+ * @{
+ */
+
+#define CAN_Sleep_Failed ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */
+#define CAN_Sleep_Ok ((uint8_t)0x01) /*!< CAN entered the sleep mode */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_wake_up_constants
+ * @{
+ */
+
+#define CAN_WakeUp_Failed ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */
+#define CAN_WakeUp_Ok ((uint8_t)0x01) /*!< CAN leaved the sleep mode */
+
+/**
+ * @}
+ */
+
+/**
+ * @defgroup CAN_Error_Code_constants
+ * @{
+ */
+
+#define CAN_ErrorCode_NoErr ((uint8_t)0x00) /*!< No Error */
+#define CAN_ErrorCode_StuffErr ((uint8_t)0x10) /*!< Stuff Error */
+#define CAN_ErrorCode_FormErr ((uint8_t)0x20) /*!< Form Error */
+#define CAN_ErrorCode_ACKErr ((uint8_t)0x30) /*!< Acknowledgment Error */
+#define CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */
+#define CAN_ErrorCode_BitDominantErr ((uint8_t)0x50) /*!< Bit Dominant Error */
+#define CAN_ErrorCode_CRCErr ((uint8_t)0x60) /*!< CRC Error */
+#define CAN_ErrorCode_SoftwareSetErr ((uint8_t)0x70) /*!< Software Set Error */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_flags
+ * @{
+ */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+ and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with CAN_GetFlagStatus() function. */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0 ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */
+#define CAN_FLAG_RQCP1 ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */
+#define CAN_FLAG_RQCP2 ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FMP0 ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */
+#define CAN_FLAG_FF0 ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag */
+#define CAN_FLAG_FOV0 ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag */
+#define CAN_FLAG_FMP1 ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */
+#define CAN_FLAG_FF1 ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag */
+#define CAN_FLAG_FOV1 ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_WKU ((uint32_t)0x31000008) /*!< Wake up Flag */
+#define CAN_FLAG_SLAK ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */
+/* Note: When SLAK intterupt is disabled (SLKIE=0), no polling on SLAKI is possible.
+ In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG ((uint32_t)0x10F00001) /*!< Error Warning Flag */
+#define CAN_FLAG_EPV ((uint32_t)0x10F00002) /*!< Error Passive Flag */
+#define CAN_FLAG_BOF ((uint32_t)0x10F00004) /*!< Bus-Off Flag */
+#define CAN_FLAG_LEC ((uint32_t)0x30F00070) /*!< Last error code Flag */
+
+#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_BOF) || \
+ ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \
+ ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \
+ ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FMP0) || \
+ ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \
+ ((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \
+ ((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \
+ ((FLAG) == CAN_FLAG_SLAK ))
+
+#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \
+ ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \
+ ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) ||\
+ ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \
+ ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK))
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_interrupts
+ * @{
+ */
+
+
+
+#define CAN_IT_TME ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/
+#define CAN_IT_FF0 ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/
+#define CAN_IT_FOV0 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/
+#define CAN_IT_FMP1 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/
+#define CAN_IT_FF1 ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/
+#define CAN_IT_FOV1 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/
+#define CAN_IT_SLK ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/
+
+/* Error Interrupts */
+#define CAN_IT_EWG ((uint32_t)0x00000100) /*!< Error warning Interrupt*/
+#define CAN_IT_EPV ((uint32_t)0x00000200) /*!< Error passive Interrupt*/
+#define CAN_IT_BOF ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/
+#define CAN_IT_LEC ((uint32_t)0x00000800) /*!< Last error code Interrupt*/
+#define CAN_IT_ERR ((uint32_t)0x00008000) /*!< Error Interrupt*/
+
+/* Flags named as Interrupts : kept only for FW compatibility */
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+
+
+#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\
+ ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\
+ ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+
+#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\
+ ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Legacy
+ * @{
+ */
+#define CANINITFAILED CAN_InitStatus_Failed
+#define CANINITOK CAN_InitStatus_Success
+#define CAN_FilterFIFO0 CAN_Filter_FIFO0
+#define CAN_FilterFIFO1 CAN_Filter_FIFO1
+#define CAN_ID_STD CAN_Id_Standard
+#define CAN_ID_EXT CAN_Id_Extended
+#define CAN_RTR_DATA CAN_RTR_Data
+#define CAN_RTR_REMOTE CAN_RTR_Remote
+#define CANTXFAILE CAN_TxStatus_Failed
+#define CANTXOK CAN_TxStatus_Ok
+#define CANTXPENDING CAN_TxStatus_Pending
+#define CAN_NO_MB CAN_TxStatus_NoMailBox
+#define CANSLEEPFAILED CAN_Sleep_Failed
+#define CANSLEEPOK CAN_Sleep_Ok
+#define CANWAKEUPFAILED CAN_WakeUp_Failed
+#define CANWAKEUPOK CAN_WakeUp_Ok
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Exported_Functions
+ * @{
+ */
+/* Function used to set the CAN configuration to the default reset state *****/
+void CAN_DeInit(CAN_TypeDef* CANx);
+
+/* Initialization and Configuration functions *********************************/
+uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct);
+void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct);
+void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct);
+void CAN_SlaveStartBank(uint8_t CAN_BankNumber);
+void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState);
+void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState);
+
+/* Transmit functions *********************************************************/
+uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage);
+uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox);
+void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox);
+
+/* Receive functions **********************************************************/
+void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage);
+void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber);
+uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber);
+
+
+/* Operation modes functions **************************************************/
+uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode);
+uint8_t CAN_Sleep(CAN_TypeDef* CANx);
+uint8_t CAN_WakeUp(CAN_TypeDef* CANx);
+
+/* Error management functions *************************************************/
+uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx);
+uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx);
+uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx);
+
+/* Interrupts and flags management functions **********************************/
+void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState);
+FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG);
+void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG);
+ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT);
+void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_CAN_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_cec.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_cec.h
new file mode 100644
index 0000000..a3f8fc7
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_cec.h
@@ -0,0 +1,210 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_cec.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the CEC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CEC_H
+#define __STM32F10x_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup CEC
+ * @{
+ */
+
+
+/** @defgroup CEC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief CEC Init structure definition
+ */
+typedef struct
+{
+ uint16_t CEC_BitTimingMode; /*!< Configures the CEC Bit Timing Error Mode.
+ This parameter can be a value of @ref CEC_BitTiming_Mode */
+ uint16_t CEC_BitPeriodMode; /*!< Configures the CEC Bit Period Error Mode.
+ This parameter can be a value of @ref CEC_BitPeriod_Mode */
+}CEC_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup CEC_BitTiming_Mode
+ * @{
+ */
+#define CEC_BitTimingStdMode ((uint16_t)0x00) /*!< Bit timing error Standard Mode */
+#define CEC_BitTimingErrFreeMode CEC_CFGR_BTEM /*!< Bit timing error Free Mode */
+
+#define IS_CEC_BIT_TIMING_ERROR_MODE(MODE) (((MODE) == CEC_BitTimingStdMode) || \
+ ((MODE) == CEC_BitTimingErrFreeMode))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BitPeriod_Mode
+ * @{
+ */
+#define CEC_BitPeriodStdMode ((uint16_t)0x00) /*!< Bit period error Standard Mode */
+#define CEC_BitPeriodFlexibleMode CEC_CFGR_BPEM /*!< Bit period error Flexible Mode */
+
+#define IS_CEC_BIT_PERIOD_ERROR_MODE(MODE) (((MODE) == CEC_BitPeriodStdMode) || \
+ ((MODE) == CEC_BitPeriodFlexibleMode))
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_interrupts_definition
+ * @{
+ */
+#define CEC_IT_TERR CEC_CSR_TERR
+#define CEC_IT_TBTRF CEC_CSR_TBTRF
+#define CEC_IT_RERR CEC_CSR_RERR
+#define CEC_IT_RBTF CEC_CSR_RBTF
+#define IS_CEC_GET_IT(IT) (((IT) == CEC_IT_TERR) || ((IT) == CEC_IT_TBTRF) || \
+ ((IT) == CEC_IT_RERR) || ((IT) == CEC_IT_RBTF))
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Own_Address
+ * @{
+ */
+#define IS_CEC_ADDRESS(ADDRESS) ((ADDRESS) < 0x10)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Prescaler
+ * @{
+ */
+#define IS_CEC_PRESCALER(PRESCALER) ((PRESCALER) <= 0x3FFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_flags_definition
+ * @{
+ */
+
+/**
+ * @brief ESR register flags
+ */
+#define CEC_FLAG_BTE ((uint32_t)0x10010000)
+#define CEC_FLAG_BPE ((uint32_t)0x10020000)
+#define CEC_FLAG_RBTFE ((uint32_t)0x10040000)
+#define CEC_FLAG_SBE ((uint32_t)0x10080000)
+#define CEC_FLAG_ACKE ((uint32_t)0x10100000)
+#define CEC_FLAG_LINE ((uint32_t)0x10200000)
+#define CEC_FLAG_TBTFE ((uint32_t)0x10400000)
+
+/**
+ * @brief CSR register flags
+ */
+#define CEC_FLAG_TEOM ((uint32_t)0x00000002)
+#define CEC_FLAG_TERR ((uint32_t)0x00000004)
+#define CEC_FLAG_TBTRF ((uint32_t)0x00000008)
+#define CEC_FLAG_RSOM ((uint32_t)0x00000010)
+#define CEC_FLAG_REOM ((uint32_t)0x00000020)
+#define CEC_FLAG_RERR ((uint32_t)0x00000040)
+#define CEC_FLAG_RBTF ((uint32_t)0x00000080)
+
+#define IS_CEC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFF03) == 0x00) && ((FLAG) != 0x00))
+
+#define IS_CEC_GET_FLAG(FLAG) (((FLAG) == CEC_FLAG_BTE) || ((FLAG) == CEC_FLAG_BPE) || \
+ ((FLAG) == CEC_FLAG_RBTFE) || ((FLAG)== CEC_FLAG_SBE) || \
+ ((FLAG) == CEC_FLAG_ACKE) || ((FLAG) == CEC_FLAG_LINE) || \
+ ((FLAG) == CEC_FLAG_TBTFE) || ((FLAG) == CEC_FLAG_TEOM) || \
+ ((FLAG) == CEC_FLAG_TERR) || ((FLAG) == CEC_FLAG_TBTRF) || \
+ ((FLAG) == CEC_FLAG_RSOM) || ((FLAG) == CEC_FLAG_REOM) || \
+ ((FLAG) == CEC_FLAG_RERR) || ((FLAG) == CEC_FLAG_RBTF))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Functions
+ * @{
+ */
+void CEC_DeInit(void);
+void CEC_Init(CEC_InitTypeDef* CEC_InitStruct);
+void CEC_Cmd(FunctionalState NewState);
+void CEC_ITConfig(FunctionalState NewState);
+void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress);
+void CEC_SetPrescaler(uint16_t CEC_Prescaler);
+void CEC_SendDataByte(uint8_t Data);
+uint8_t CEC_ReceiveDataByte(void);
+void CEC_StartOfMessage(void);
+void CEC_EndOfMessageCmd(FunctionalState NewState);
+FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG);
+void CEC_ClearFlag(uint32_t CEC_FLAG);
+ITStatus CEC_GetITStatus(uint8_t CEC_IT);
+void CEC_ClearITPendingBit(uint16_t CEC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_CEC_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h
new file mode 100644
index 0000000..658a51c
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h
@@ -0,0 +1,94 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_crc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the CRC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CRC_H
+#define __STM32F10x_CRC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup CRC
+ * @{
+ */
+
+/** @defgroup CRC_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Functions
+ * @{
+ */
+
+void CRC_ResetDR(void);
+uint32_t CRC_CalcCRC(uint32_t Data);
+uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t CRC_GetCRC(void);
+void CRC_SetIDRegister(uint8_t IDValue);
+uint8_t CRC_GetIDRegister(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_CRC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dac.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dac.h
new file mode 100644
index 0000000..7106164
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dac.h
@@ -0,0 +1,317 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dac.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the DAC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_DAC_H
+#define __STM32F10x_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup DAC
+ * @{
+ */
+
+/** @defgroup DAC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief DAC Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
+ This parameter can be a value of @ref DAC_trigger_selection */
+
+ uint32_t DAC_WaveGeneration; /*!< Specifies whether DAC channel noise waves or triangle waves
+ are generated, or whether no wave is generated.
+ This parameter can be a value of @ref DAC_wave_generation */
+
+ uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or
+ the maximum amplitude triangle generation for the DAC channel.
+ This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude */
+
+ uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+ This parameter can be a value of @ref DAC_output_buffer */
+}DAC_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup DAC_trigger_selection
+ * @{
+ */
+
+#define DAC_Trigger_None ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_Trigger_T6_TRGO ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T8_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel
+ only in High-density devices*/
+#define DAC_Trigger_T3_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel
+ only in Connectivity line, Medium-density and Low-density Value Line devices */
+#define DAC_Trigger_T7_TRGO ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T5_TRGO ((uint32_t)0x0000001C) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T15_TRGO ((uint32_t)0x0000001C) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel
+ only in Medium-density and Low-density Value Line devices*/
+#define DAC_Trigger_T2_TRGO ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T4_TRGO ((uint32_t)0x0000002C) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_Ext_IT9 ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_Software ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \
+ ((TRIGGER) == DAC_Trigger_T6_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_T8_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_T7_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_T5_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_T2_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_T4_TRGO) || \
+ ((TRIGGER) == DAC_Trigger_Ext_IT9) || \
+ ((TRIGGER) == DAC_Trigger_Software))
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_wave_generation
+ * @{
+ */
+
+#define DAC_WaveGeneration_None ((uint32_t)0x00000000)
+#define DAC_WaveGeneration_Noise ((uint32_t)0x00000040)
+#define DAC_WaveGeneration_Triangle ((uint32_t)0x00000080)
+#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \
+ ((WAVE) == DAC_WaveGeneration_Noise) || \
+ ((WAVE) == DAC_WaveGeneration_Triangle))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_lfsrunmask_triangleamplitude
+ * @{
+ */
+
+#define DAC_LFSRUnmask_Bit0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUnmask_Bits1_0 ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits2_0 ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits3_0 ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits4_0 ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits5_0 ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits6_0 ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits7_0 ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits8_0 ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits9_0 ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits10_0 ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits11_0 ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TriangleAmplitude_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
+#define DAC_TriangleAmplitude_3 ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */
+#define DAC_TriangleAmplitude_7 ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */
+#define DAC_TriangleAmplitude_15 ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */
+#define DAC_TriangleAmplitude_31 ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */
+#define DAC_TriangleAmplitude_63 ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */
+#define DAC_TriangleAmplitude_127 ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */
+#define DAC_TriangleAmplitude_255 ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */
+#define DAC_TriangleAmplitude_511 ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */
+#define DAC_TriangleAmplitude_1023 ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TriangleAmplitude_2047 ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TriangleAmplitude_4095 ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */
+
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits1_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits2_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits3_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits4_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits5_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits6_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits7_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits8_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits9_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits10_0) || \
+ ((VALUE) == DAC_LFSRUnmask_Bits11_0) || \
+ ((VALUE) == DAC_TriangleAmplitude_1) || \
+ ((VALUE) == DAC_TriangleAmplitude_3) || \
+ ((VALUE) == DAC_TriangleAmplitude_7) || \
+ ((VALUE) == DAC_TriangleAmplitude_15) || \
+ ((VALUE) == DAC_TriangleAmplitude_31) || \
+ ((VALUE) == DAC_TriangleAmplitude_63) || \
+ ((VALUE) == DAC_TriangleAmplitude_127) || \
+ ((VALUE) == DAC_TriangleAmplitude_255) || \
+ ((VALUE) == DAC_TriangleAmplitude_511) || \
+ ((VALUE) == DAC_TriangleAmplitude_1023) || \
+ ((VALUE) == DAC_TriangleAmplitude_2047) || \
+ ((VALUE) == DAC_TriangleAmplitude_4095))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_output_buffer
+ * @{
+ */
+
+#define DAC_OutputBuffer_Enable ((uint32_t)0x00000000)
+#define DAC_OutputBuffer_Disable ((uint32_t)0x00000002)
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \
+ ((STATE) == DAC_OutputBuffer_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Channel_selection
+ * @{
+ */
+
+#define DAC_Channel_1 ((uint32_t)0x00000000)
+#define DAC_Channel_2 ((uint32_t)0x00000010)
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \
+ ((CHANNEL) == DAC_Channel_2))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data_alignment
+ * @{
+ */
+
+#define DAC_Align_12b_R ((uint32_t)0x00000000)
+#define DAC_Align_12b_L ((uint32_t)0x00000004)
+#define DAC_Align_8b_R ((uint32_t)0x00000008)
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \
+ ((ALIGN) == DAC_Align_12b_L) || \
+ ((ALIGN) == DAC_Align_8b_R))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_wave_generation
+ * @{
+ */
+
+#define DAC_Wave_Noise ((uint32_t)0x00000040)
+#define DAC_Wave_Triangle ((uint32_t)0x00000080)
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \
+ ((WAVE) == DAC_Wave_Triangle))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data
+ * @{
+ */
+
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
+/**
+ * @}
+ */
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/** @defgroup DAC_interrupts_definition
+ * @{
+ */
+
+#define DAC_IT_DMAUDR ((uint32_t)0x00002000)
+#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR))
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_flags_definition
+ * @{
+ */
+
+#define DAC_FLAG_DMAUDR ((uint32_t)0x00002000)
+#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR))
+
+/**
+ * @}
+ */
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Exported_Functions
+ * @{
+ */
+
+void DAC_DeInit(void);
+void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct);
+void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct);
+void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState);
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState);
+#endif
+void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState);
+void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState);
+void DAC_DualSoftwareTriggerCmd(FunctionalState NewState);
+void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState);
+void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data);
+void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data);
+void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1);
+uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel);
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG);
+void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG);
+ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT);
+void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_DAC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h
new file mode 100644
index 0000000..1e6a68a
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h
@@ -0,0 +1,119 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dbgmcu.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the DBGMCU
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_DBGMCU_H
+#define __STM32F10x_DBGMCU_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup DBGMCU
+ * @{
+ */
+
+/** @defgroup DBGMCU_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Exported_Constants
+ * @{
+ */
+
+#define DBGMCU_SLEEP ((uint32_t)0x00000001)
+#define DBGMCU_STOP ((uint32_t)0x00000002)
+#define DBGMCU_STANDBY ((uint32_t)0x00000004)
+#define DBGMCU_IWDG_STOP ((uint32_t)0x00000100)
+#define DBGMCU_WWDG_STOP ((uint32_t)0x00000200)
+#define DBGMCU_TIM1_STOP ((uint32_t)0x00000400)
+#define DBGMCU_TIM2_STOP ((uint32_t)0x00000800)
+#define DBGMCU_TIM3_STOP ((uint32_t)0x00001000)
+#define DBGMCU_TIM4_STOP ((uint32_t)0x00002000)
+#define DBGMCU_CAN1_STOP ((uint32_t)0x00004000)
+#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000)
+#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000)
+#define DBGMCU_TIM8_STOP ((uint32_t)0x00020000)
+#define DBGMCU_TIM5_STOP ((uint32_t)0x00040000)
+#define DBGMCU_TIM6_STOP ((uint32_t)0x00080000)
+#define DBGMCU_TIM7_STOP ((uint32_t)0x00100000)
+#define DBGMCU_CAN2_STOP ((uint32_t)0x00200000)
+#define DBGMCU_TIM15_STOP ((uint32_t)0x00400000)
+#define DBGMCU_TIM16_STOP ((uint32_t)0x00800000)
+#define DBGMCU_TIM17_STOP ((uint32_t)0x01000000)
+#define DBGMCU_TIM12_STOP ((uint32_t)0x02000000)
+#define DBGMCU_TIM13_STOP ((uint32_t)0x04000000)
+#define DBGMCU_TIM14_STOP ((uint32_t)0x08000000)
+#define DBGMCU_TIM9_STOP ((uint32_t)0x10000000)
+#define DBGMCU_TIM10_STOP ((uint32_t)0x20000000)
+#define DBGMCU_TIM11_STOP ((uint32_t)0x40000000)
+
+#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0x800000F8) == 0x00) && ((PERIPH) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Exported_Functions
+ * @{
+ */
+
+uint32_t DBGMCU_GetREVID(void);
+uint32_t DBGMCU_GetDEVID(void);
+void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_DBGMCU_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h
new file mode 100644
index 0000000..b5dc6a8
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h
@@ -0,0 +1,439 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dma.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the DMA firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_DMA_H
+#define __STM32F10x_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/** @defgroup DMA_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief DMA Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Channelx. */
+
+ uint32_t DMA_MemoryBaseAddr; /*!< Specifies the memory base address for DMAy Channelx. */
+
+ uint32_t DMA_DIR; /*!< Specifies if the peripheral is the source or destination.
+ This parameter can be a value of @ref DMA_data_transfer_direction */
+
+ uint32_t DMA_BufferSize; /*!< Specifies the buffer size, in data unit, of the specified Channel.
+ The data unit is equal to the configuration set in DMA_PeripheralDataSize
+ or DMA_MemoryDataSize members depending in the transfer direction. */
+
+ uint32_t DMA_PeripheralInc; /*!< Specifies whether the Peripheral address register is incremented or not.
+ This parameter can be a value of @ref DMA_peripheral_incremented_mode */
+
+ uint32_t DMA_MemoryInc; /*!< Specifies whether the memory address register is incremented or not.
+ This parameter can be a value of @ref DMA_memory_incremented_mode */
+
+ uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_peripheral_data_size */
+
+ uint32_t DMA_MemoryDataSize; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_memory_data_size */
+
+ uint32_t DMA_Mode; /*!< Specifies the operation mode of the DMAy Channelx.
+ This parameter can be a value of @ref DMA_circular_normal_mode.
+ @note: The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Channel */
+
+ uint32_t DMA_Priority; /*!< Specifies the software priority for the DMAy Channelx.
+ This parameter can be a value of @ref DMA_priority_level */
+
+ uint32_t DMA_M2M; /*!< Specifies if the DMAy Channelx will be used in memory-to-memory transfer.
+ This parameter can be a value of @ref DMA_memory_to_memory */
+}DMA_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Constants
+ * @{
+ */
+
+#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Channel1) || \
+ ((PERIPH) == DMA1_Channel2) || \
+ ((PERIPH) == DMA1_Channel3) || \
+ ((PERIPH) == DMA1_Channel4) || \
+ ((PERIPH) == DMA1_Channel5) || \
+ ((PERIPH) == DMA1_Channel6) || \
+ ((PERIPH) == DMA1_Channel7) || \
+ ((PERIPH) == DMA2_Channel1) || \
+ ((PERIPH) == DMA2_Channel2) || \
+ ((PERIPH) == DMA2_Channel3) || \
+ ((PERIPH) == DMA2_Channel4) || \
+ ((PERIPH) == DMA2_Channel5))
+
+/** @defgroup DMA_data_transfer_direction
+ * @{
+ */
+
+#define DMA_DIR_PeripheralDST ((uint32_t)0x00000010)
+#define DMA_DIR_PeripheralSRC ((uint32_t)0x00000000)
+#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralDST) || \
+ ((DIR) == DMA_DIR_PeripheralSRC))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_peripheral_incremented_mode
+ * @{
+ */
+
+#define DMA_PeripheralInc_Enable ((uint32_t)0x00000040)
+#define DMA_PeripheralInc_Disable ((uint32_t)0x00000000)
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \
+ ((STATE) == DMA_PeripheralInc_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_memory_incremented_mode
+ * @{
+ */
+
+#define DMA_MemoryInc_Enable ((uint32_t)0x00000080)
+#define DMA_MemoryInc_Disable ((uint32_t)0x00000000)
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \
+ ((STATE) == DMA_MemoryInc_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_peripheral_data_size
+ * @{
+ */
+
+#define DMA_PeripheralDataSize_Byte ((uint32_t)0x00000000)
+#define DMA_PeripheralDataSize_HalfWord ((uint32_t)0x00000100)
+#define DMA_PeripheralDataSize_Word ((uint32_t)0x00000200)
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \
+ ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \
+ ((SIZE) == DMA_PeripheralDataSize_Word))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_memory_data_size
+ * @{
+ */
+
+#define DMA_MemoryDataSize_Byte ((uint32_t)0x00000000)
+#define DMA_MemoryDataSize_HalfWord ((uint32_t)0x00000400)
+#define DMA_MemoryDataSize_Word ((uint32_t)0x00000800)
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \
+ ((SIZE) == DMA_MemoryDataSize_HalfWord) || \
+ ((SIZE) == DMA_MemoryDataSize_Word))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_circular_normal_mode
+ * @{
+ */
+
+#define DMA_Mode_Circular ((uint32_t)0x00000020)
+#define DMA_Mode_Normal ((uint32_t)0x00000000)
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Circular) || ((MODE) == DMA_Mode_Normal))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_priority_level
+ * @{
+ */
+
+#define DMA_Priority_VeryHigh ((uint32_t)0x00003000)
+#define DMA_Priority_High ((uint32_t)0x00002000)
+#define DMA_Priority_Medium ((uint32_t)0x00001000)
+#define DMA_Priority_Low ((uint32_t)0x00000000)
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \
+ ((PRIORITY) == DMA_Priority_High) || \
+ ((PRIORITY) == DMA_Priority_Medium) || \
+ ((PRIORITY) == DMA_Priority_Low))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_memory_to_memory
+ * @{
+ */
+
+#define DMA_M2M_Enable ((uint32_t)0x00004000)
+#define DMA_M2M_Disable ((uint32_t)0x00000000)
+#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Enable) || ((STATE) == DMA_M2M_Disable))
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_interrupts_definition
+ * @{
+ */
+
+#define DMA_IT_TC ((uint32_t)0x00000002)
+#define DMA_IT_HT ((uint32_t)0x00000004)
+#define DMA_IT_TE ((uint32_t)0x00000008)
+#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00))
+
+#define DMA1_IT_GL1 ((uint32_t)0x00000001)
+#define DMA1_IT_TC1 ((uint32_t)0x00000002)
+#define DMA1_IT_HT1 ((uint32_t)0x00000004)
+#define DMA1_IT_TE1 ((uint32_t)0x00000008)
+#define DMA1_IT_GL2 ((uint32_t)0x00000010)
+#define DMA1_IT_TC2 ((uint32_t)0x00000020)
+#define DMA1_IT_HT2 ((uint32_t)0x00000040)
+#define DMA1_IT_TE2 ((uint32_t)0x00000080)
+#define DMA1_IT_GL3 ((uint32_t)0x00000100)
+#define DMA1_IT_TC3 ((uint32_t)0x00000200)
+#define DMA1_IT_HT3 ((uint32_t)0x00000400)
+#define DMA1_IT_TE3 ((uint32_t)0x00000800)
+#define DMA1_IT_GL4 ((uint32_t)0x00001000)
+#define DMA1_IT_TC4 ((uint32_t)0x00002000)
+#define DMA1_IT_HT4 ((uint32_t)0x00004000)
+#define DMA1_IT_TE4 ((uint32_t)0x00008000)
+#define DMA1_IT_GL5 ((uint32_t)0x00010000)
+#define DMA1_IT_TC5 ((uint32_t)0x00020000)
+#define DMA1_IT_HT5 ((uint32_t)0x00040000)
+#define DMA1_IT_TE5 ((uint32_t)0x00080000)
+#define DMA1_IT_GL6 ((uint32_t)0x00100000)
+#define DMA1_IT_TC6 ((uint32_t)0x00200000)
+#define DMA1_IT_HT6 ((uint32_t)0x00400000)
+#define DMA1_IT_TE6 ((uint32_t)0x00800000)
+#define DMA1_IT_GL7 ((uint32_t)0x01000000)
+#define DMA1_IT_TC7 ((uint32_t)0x02000000)
+#define DMA1_IT_HT7 ((uint32_t)0x04000000)
+#define DMA1_IT_TE7 ((uint32_t)0x08000000)
+
+#define DMA2_IT_GL1 ((uint32_t)0x10000001)
+#define DMA2_IT_TC1 ((uint32_t)0x10000002)
+#define DMA2_IT_HT1 ((uint32_t)0x10000004)
+#define DMA2_IT_TE1 ((uint32_t)0x10000008)
+#define DMA2_IT_GL2 ((uint32_t)0x10000010)
+#define DMA2_IT_TC2 ((uint32_t)0x10000020)
+#define DMA2_IT_HT2 ((uint32_t)0x10000040)
+#define DMA2_IT_TE2 ((uint32_t)0x10000080)
+#define DMA2_IT_GL3 ((uint32_t)0x10000100)
+#define DMA2_IT_TC3 ((uint32_t)0x10000200)
+#define DMA2_IT_HT3 ((uint32_t)0x10000400)
+#define DMA2_IT_TE3 ((uint32_t)0x10000800)
+#define DMA2_IT_GL4 ((uint32_t)0x10001000)
+#define DMA2_IT_TC4 ((uint32_t)0x10002000)
+#define DMA2_IT_HT4 ((uint32_t)0x10004000)
+#define DMA2_IT_TE4 ((uint32_t)0x10008000)
+#define DMA2_IT_GL5 ((uint32_t)0x10010000)
+#define DMA2_IT_TC5 ((uint32_t)0x10020000)
+#define DMA2_IT_HT5 ((uint32_t)0x10040000)
+#define DMA2_IT_TE5 ((uint32_t)0x10080000)
+
+#define IS_DMA_CLEAR_IT(IT) (((((IT) & 0xF0000000) == 0x00) || (((IT) & 0xEFF00000) == 0x00)) && ((IT) != 0x00))
+
+#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \
+ ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \
+ ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \
+ ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \
+ ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \
+ ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \
+ ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \
+ ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \
+ ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \
+ ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \
+ ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \
+ ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \
+ ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \
+ ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7) || \
+ ((IT) == DMA2_IT_GL1) || ((IT) == DMA2_IT_TC1) || \
+ ((IT) == DMA2_IT_HT1) || ((IT) == DMA2_IT_TE1) || \
+ ((IT) == DMA2_IT_GL2) || ((IT) == DMA2_IT_TC2) || \
+ ((IT) == DMA2_IT_HT2) || ((IT) == DMA2_IT_TE2) || \
+ ((IT) == DMA2_IT_GL3) || ((IT) == DMA2_IT_TC3) || \
+ ((IT) == DMA2_IT_HT3) || ((IT) == DMA2_IT_TE3) || \
+ ((IT) == DMA2_IT_GL4) || ((IT) == DMA2_IT_TC4) || \
+ ((IT) == DMA2_IT_HT4) || ((IT) == DMA2_IT_TE4) || \
+ ((IT) == DMA2_IT_GL5) || ((IT) == DMA2_IT_TC5) || \
+ ((IT) == DMA2_IT_HT5) || ((IT) == DMA2_IT_TE5))
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flags_definition
+ * @{
+ */
+#define DMA1_FLAG_GL1 ((uint32_t)0x00000001)
+#define DMA1_FLAG_TC1 ((uint32_t)0x00000002)
+#define DMA1_FLAG_HT1 ((uint32_t)0x00000004)
+#define DMA1_FLAG_TE1 ((uint32_t)0x00000008)
+#define DMA1_FLAG_GL2 ((uint32_t)0x00000010)
+#define DMA1_FLAG_TC2 ((uint32_t)0x00000020)
+#define DMA1_FLAG_HT2 ((uint32_t)0x00000040)
+#define DMA1_FLAG_TE2 ((uint32_t)0x00000080)
+#define DMA1_FLAG_GL3 ((uint32_t)0x00000100)
+#define DMA1_FLAG_TC3 ((uint32_t)0x00000200)
+#define DMA1_FLAG_HT3 ((uint32_t)0x00000400)
+#define DMA1_FLAG_TE3 ((uint32_t)0x00000800)
+#define DMA1_FLAG_GL4 ((uint32_t)0x00001000)
+#define DMA1_FLAG_TC4 ((uint32_t)0x00002000)
+#define DMA1_FLAG_HT4 ((uint32_t)0x00004000)
+#define DMA1_FLAG_TE4 ((uint32_t)0x00008000)
+#define DMA1_FLAG_GL5 ((uint32_t)0x00010000)
+#define DMA1_FLAG_TC5 ((uint32_t)0x00020000)
+#define DMA1_FLAG_HT5 ((uint32_t)0x00040000)
+#define DMA1_FLAG_TE5 ((uint32_t)0x00080000)
+#define DMA1_FLAG_GL6 ((uint32_t)0x00100000)
+#define DMA1_FLAG_TC6 ((uint32_t)0x00200000)
+#define DMA1_FLAG_HT6 ((uint32_t)0x00400000)
+#define DMA1_FLAG_TE6 ((uint32_t)0x00800000)
+#define DMA1_FLAG_GL7 ((uint32_t)0x01000000)
+#define DMA1_FLAG_TC7 ((uint32_t)0x02000000)
+#define DMA1_FLAG_HT7 ((uint32_t)0x04000000)
+#define DMA1_FLAG_TE7 ((uint32_t)0x08000000)
+
+#define DMA2_FLAG_GL1 ((uint32_t)0x10000001)
+#define DMA2_FLAG_TC1 ((uint32_t)0x10000002)
+#define DMA2_FLAG_HT1 ((uint32_t)0x10000004)
+#define DMA2_FLAG_TE1 ((uint32_t)0x10000008)
+#define DMA2_FLAG_GL2 ((uint32_t)0x10000010)
+#define DMA2_FLAG_TC2 ((uint32_t)0x10000020)
+#define DMA2_FLAG_HT2 ((uint32_t)0x10000040)
+#define DMA2_FLAG_TE2 ((uint32_t)0x10000080)
+#define DMA2_FLAG_GL3 ((uint32_t)0x10000100)
+#define DMA2_FLAG_TC3 ((uint32_t)0x10000200)
+#define DMA2_FLAG_HT3 ((uint32_t)0x10000400)
+#define DMA2_FLAG_TE3 ((uint32_t)0x10000800)
+#define DMA2_FLAG_GL4 ((uint32_t)0x10001000)
+#define DMA2_FLAG_TC4 ((uint32_t)0x10002000)
+#define DMA2_FLAG_HT4 ((uint32_t)0x10004000)
+#define DMA2_FLAG_TE4 ((uint32_t)0x10008000)
+#define DMA2_FLAG_GL5 ((uint32_t)0x10010000)
+#define DMA2_FLAG_TC5 ((uint32_t)0x10020000)
+#define DMA2_FLAG_HT5 ((uint32_t)0x10040000)
+#define DMA2_FLAG_TE5 ((uint32_t)0x10080000)
+
+#define IS_DMA_CLEAR_FLAG(FLAG) (((((FLAG) & 0xF0000000) == 0x00) || (((FLAG) & 0xEFF00000) == 0x00)) && ((FLAG) != 0x00))
+
+#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \
+ ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \
+ ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \
+ ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \
+ ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \
+ ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \
+ ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \
+ ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \
+ ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \
+ ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \
+ ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \
+ ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \
+ ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \
+ ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7) || \
+ ((FLAG) == DMA2_FLAG_GL1) || ((FLAG) == DMA2_FLAG_TC1) || \
+ ((FLAG) == DMA2_FLAG_HT1) || ((FLAG) == DMA2_FLAG_TE1) || \
+ ((FLAG) == DMA2_FLAG_GL2) || ((FLAG) == DMA2_FLAG_TC2) || \
+ ((FLAG) == DMA2_FLAG_HT2) || ((FLAG) == DMA2_FLAG_TE2) || \
+ ((FLAG) == DMA2_FLAG_GL3) || ((FLAG) == DMA2_FLAG_TC3) || \
+ ((FLAG) == DMA2_FLAG_HT3) || ((FLAG) == DMA2_FLAG_TE3) || \
+ ((FLAG) == DMA2_FLAG_GL4) || ((FLAG) == DMA2_FLAG_TC4) || \
+ ((FLAG) == DMA2_FLAG_HT4) || ((FLAG) == DMA2_FLAG_TE4) || \
+ ((FLAG) == DMA2_FLAG_GL5) || ((FLAG) == DMA2_FLAG_TC5) || \
+ ((FLAG) == DMA2_FLAG_HT5) || ((FLAG) == DMA2_FLAG_TE5))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Buffer_Size
+ * @{
+ */
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions
+ * @{
+ */
+
+void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx);
+void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct);
+void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct);
+void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState);
+void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState);
+void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber);
+uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx);
+FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG);
+void DMA_ClearFlag(uint32_t DMAy_FLAG);
+ITStatus DMA_GetITStatus(uint32_t DMAy_IT);
+void DMA_ClearITPendingBit(uint32_t DMAy_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_DMA_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_exti.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_exti.h
new file mode 100644
index 0000000..a1ab7d0
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_exti.h
@@ -0,0 +1,184 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_exti.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the EXTI firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_EXTI_H
+#define __STM32F10x_EXTI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup EXTI
+ * @{
+ */
+
+/** @defgroup EXTI_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief EXTI mode enumeration
+ */
+
+typedef enum
+{
+ EXTI_Mode_Interrupt = 0x00,
+ EXTI_Mode_Event = 0x04
+}EXTIMode_TypeDef;
+
+#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event))
+
+/**
+ * @brief EXTI Trigger enumeration
+ */
+
+typedef enum
+{
+ EXTI_Trigger_Rising = 0x08,
+ EXTI_Trigger_Falling = 0x0C,
+ EXTI_Trigger_Rising_Falling = 0x10
+}EXTITrigger_TypeDef;
+
+#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \
+ ((TRIGGER) == EXTI_Trigger_Falling) || \
+ ((TRIGGER) == EXTI_Trigger_Rising_Falling))
+/**
+ * @brief EXTI Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled.
+ This parameter can be any combination of @ref EXTI_Lines */
+
+ EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines.
+ This parameter can be a value of @ref EXTIMode_TypeDef */
+
+ EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
+ This parameter can be a value of @ref EXTIMode_TypeDef */
+
+ FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines.
+ This parameter can be set either to ENABLE or DISABLE */
+}EXTI_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Exported_Constants
+ * @{
+ */
+
+/** @defgroup EXTI_Lines
+ * @{
+ */
+
+#define EXTI_Line0 ((uint32_t)0x00001) /*!< External interrupt line 0 */
+#define EXTI_Line1 ((uint32_t)0x00002) /*!< External interrupt line 1 */
+#define EXTI_Line2 ((uint32_t)0x00004) /*!< External interrupt line 2 */
+#define EXTI_Line3 ((uint32_t)0x00008) /*!< External interrupt line 3 */
+#define EXTI_Line4 ((uint32_t)0x00010) /*!< External interrupt line 4 */
+#define EXTI_Line5 ((uint32_t)0x00020) /*!< External interrupt line 5 */
+#define EXTI_Line6 ((uint32_t)0x00040) /*!< External interrupt line 6 */
+#define EXTI_Line7 ((uint32_t)0x00080) /*!< External interrupt line 7 */
+#define EXTI_Line8 ((uint32_t)0x00100) /*!< External interrupt line 8 */
+#define EXTI_Line9 ((uint32_t)0x00200) /*!< External interrupt line 9 */
+#define EXTI_Line10 ((uint32_t)0x00400) /*!< External interrupt line 10 */
+#define EXTI_Line11 ((uint32_t)0x00800) /*!< External interrupt line 11 */
+#define EXTI_Line12 ((uint32_t)0x01000) /*!< External interrupt line 12 */
+#define EXTI_Line13 ((uint32_t)0x02000) /*!< External interrupt line 13 */
+#define EXTI_Line14 ((uint32_t)0x04000) /*!< External interrupt line 14 */
+#define EXTI_Line15 ((uint32_t)0x08000) /*!< External interrupt line 15 */
+#define EXTI_Line16 ((uint32_t)0x10000) /*!< External interrupt line 16 Connected to the PVD Output */
+#define EXTI_Line17 ((uint32_t)0x20000) /*!< External interrupt line 17 Connected to the RTC Alarm event */
+#define EXTI_Line18 ((uint32_t)0x40000) /*!< External interrupt line 18 Connected to the USB Device/USB OTG FS
+ Wakeup from suspend event */
+#define EXTI_Line19 ((uint32_t)0x80000) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
+
+#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFFF00000) == 0x00) && ((LINE) != (uint16_t)0x00))
+#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \
+ ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \
+ ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \
+ ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \
+ ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \
+ ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \
+ ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \
+ ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \
+ ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \
+ ((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19))
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Exported_Functions
+ * @{
+ */
+
+void EXTI_DeInit(void);
+void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct);
+void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct);
+void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line);
+FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line);
+void EXTI_ClearFlag(uint32_t EXTI_Line);
+ITStatus EXTI_GetITStatus(uint32_t EXTI_Line);
+void EXTI_ClearITPendingBit(uint32_t EXTI_Line);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_EXTI_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_flash.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_flash.h
new file mode 100644
index 0000000..f46d4e8
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_flash.h
@@ -0,0 +1,426 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_flash.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the FLASH
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_FLASH_H
+#define __STM32F10x_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/** @defgroup FLASH_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Status
+ */
+
+typedef enum
+{
+ FLASH_BUSY = 1,
+ FLASH_ERROR_PG,
+ FLASH_ERROR_WRP,
+ FLASH_COMPLETE,
+ FLASH_TIMEOUT
+}FLASH_Status;
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Constants
+ * @{
+ */
+
+/** @defgroup Flash_Latency
+ * @{
+ */
+
+#define FLASH_Latency_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */
+#define FLASH_Latency_1 ((uint32_t)0x00000001) /*!< FLASH One Latency cycle */
+#define FLASH_Latency_2 ((uint32_t)0x00000002) /*!< FLASH Two Latency cycles */
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \
+ ((LATENCY) == FLASH_Latency_1) || \
+ ((LATENCY) == FLASH_Latency_2))
+/**
+ * @}
+ */
+
+/** @defgroup Half_Cycle_Enable_Disable
+ * @{
+ */
+
+#define FLASH_HalfCycleAccess_Enable ((uint32_t)0x00000008) /*!< FLASH Half Cycle Enable */
+#define FLASH_HalfCycleAccess_Disable ((uint32_t)0x00000000) /*!< FLASH Half Cycle Disable */
+#define IS_FLASH_HALFCYCLEACCESS_STATE(STATE) (((STATE) == FLASH_HalfCycleAccess_Enable) || \
+ ((STATE) == FLASH_HalfCycleAccess_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup Prefetch_Buffer_Enable_Disable
+ * @{
+ */
+
+#define FLASH_PrefetchBuffer_Enable ((uint32_t)0x00000010) /*!< FLASH Prefetch Buffer Enable */
+#define FLASH_PrefetchBuffer_Disable ((uint32_t)0x00000000) /*!< FLASH Prefetch Buffer Disable */
+#define IS_FLASH_PREFETCHBUFFER_STATE(STATE) (((STATE) == FLASH_PrefetchBuffer_Enable) || \
+ ((STATE) == FLASH_PrefetchBuffer_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup Option_Bytes_Write_Protection
+ * @{
+ */
+
+/* Values to be used with STM32 Low and Medium density devices */
+#define FLASH_WRProt_Pages0to3 ((uint32_t)0x00000001) /*!< STM32 Low and Medium density devices: Write protection of page 0 to 3 */
+#define FLASH_WRProt_Pages4to7 ((uint32_t)0x00000002) /*!< STM32 Low and Medium density devices: Write protection of page 4 to 7 */
+#define FLASH_WRProt_Pages8to11 ((uint32_t)0x00000004) /*!< STM32 Low and Medium density devices: Write protection of page 8 to 11 */
+#define FLASH_WRProt_Pages12to15 ((uint32_t)0x00000008) /*!< STM32 Low and Medium density devices: Write protection of page 12 to 15 */
+#define FLASH_WRProt_Pages16to19 ((uint32_t)0x00000010) /*!< STM32 Low and Medium density devices: Write protection of page 16 to 19 */
+#define FLASH_WRProt_Pages20to23 ((uint32_t)0x00000020) /*!< STM32 Low and Medium density devices: Write protection of page 20 to 23 */
+#define FLASH_WRProt_Pages24to27 ((uint32_t)0x00000040) /*!< STM32 Low and Medium density devices: Write protection of page 24 to 27 */
+#define FLASH_WRProt_Pages28to31 ((uint32_t)0x00000080) /*!< STM32 Low and Medium density devices: Write protection of page 28 to 31 */
+
+/* Values to be used with STM32 Medium-density devices */
+#define FLASH_WRProt_Pages32to35 ((uint32_t)0x00000100) /*!< STM32 Medium-density devices: Write protection of page 32 to 35 */
+#define FLASH_WRProt_Pages36to39 ((uint32_t)0x00000200) /*!< STM32 Medium-density devices: Write protection of page 36 to 39 */
+#define FLASH_WRProt_Pages40to43 ((uint32_t)0x00000400) /*!< STM32 Medium-density devices: Write protection of page 40 to 43 */
+#define FLASH_WRProt_Pages44to47 ((uint32_t)0x00000800) /*!< STM32 Medium-density devices: Write protection of page 44 to 47 */
+#define FLASH_WRProt_Pages48to51 ((uint32_t)0x00001000) /*!< STM32 Medium-density devices: Write protection of page 48 to 51 */
+#define FLASH_WRProt_Pages52to55 ((uint32_t)0x00002000) /*!< STM32 Medium-density devices: Write protection of page 52 to 55 */
+#define FLASH_WRProt_Pages56to59 ((uint32_t)0x00004000) /*!< STM32 Medium-density devices: Write protection of page 56 to 59 */
+#define FLASH_WRProt_Pages60to63 ((uint32_t)0x00008000) /*!< STM32 Medium-density devices: Write protection of page 60 to 63 */
+#define FLASH_WRProt_Pages64to67 ((uint32_t)0x00010000) /*!< STM32 Medium-density devices: Write protection of page 64 to 67 */
+#define FLASH_WRProt_Pages68to71 ((uint32_t)0x00020000) /*!< STM32 Medium-density devices: Write protection of page 68 to 71 */
+#define FLASH_WRProt_Pages72to75 ((uint32_t)0x00040000) /*!< STM32 Medium-density devices: Write protection of page 72 to 75 */
+#define FLASH_WRProt_Pages76to79 ((uint32_t)0x00080000) /*!< STM32 Medium-density devices: Write protection of page 76 to 79 */
+#define FLASH_WRProt_Pages80to83 ((uint32_t)0x00100000) /*!< STM32 Medium-density devices: Write protection of page 80 to 83 */
+#define FLASH_WRProt_Pages84to87 ((uint32_t)0x00200000) /*!< STM32 Medium-density devices: Write protection of page 84 to 87 */
+#define FLASH_WRProt_Pages88to91 ((uint32_t)0x00400000) /*!< STM32 Medium-density devices: Write protection of page 88 to 91 */
+#define FLASH_WRProt_Pages92to95 ((uint32_t)0x00800000) /*!< STM32 Medium-density devices: Write protection of page 92 to 95 */
+#define FLASH_WRProt_Pages96to99 ((uint32_t)0x01000000) /*!< STM32 Medium-density devices: Write protection of page 96 to 99 */
+#define FLASH_WRProt_Pages100to103 ((uint32_t)0x02000000) /*!< STM32 Medium-density devices: Write protection of page 100 to 103 */
+#define FLASH_WRProt_Pages104to107 ((uint32_t)0x04000000) /*!< STM32 Medium-density devices: Write protection of page 104 to 107 */
+#define FLASH_WRProt_Pages108to111 ((uint32_t)0x08000000) /*!< STM32 Medium-density devices: Write protection of page 108 to 111 */
+#define FLASH_WRProt_Pages112to115 ((uint32_t)0x10000000) /*!< STM32 Medium-density devices: Write protection of page 112 to 115 */
+#define FLASH_WRProt_Pages116to119 ((uint32_t)0x20000000) /*!< STM32 Medium-density devices: Write protection of page 115 to 119 */
+#define FLASH_WRProt_Pages120to123 ((uint32_t)0x40000000) /*!< STM32 Medium-density devices: Write protection of page 120 to 123 */
+#define FLASH_WRProt_Pages124to127 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 124 to 127 */
+
+/* Values to be used with STM32 High-density and STM32F10X Connectivity line devices */
+#define FLASH_WRProt_Pages0to1 ((uint32_t)0x00000001) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 0 to 1 */
+#define FLASH_WRProt_Pages2to3 ((uint32_t)0x00000002) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 2 to 3 */
+#define FLASH_WRProt_Pages4to5 ((uint32_t)0x00000004) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 4 to 5 */
+#define FLASH_WRProt_Pages6to7 ((uint32_t)0x00000008) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 6 to 7 */
+#define FLASH_WRProt_Pages8to9 ((uint32_t)0x00000010) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 8 to 9 */
+#define FLASH_WRProt_Pages10to11 ((uint32_t)0x00000020) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 10 to 11 */
+#define FLASH_WRProt_Pages12to13 ((uint32_t)0x00000040) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 12 to 13 */
+#define FLASH_WRProt_Pages14to15 ((uint32_t)0x00000080) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 14 to 15 */
+#define FLASH_WRProt_Pages16to17 ((uint32_t)0x00000100) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 16 to 17 */
+#define FLASH_WRProt_Pages18to19 ((uint32_t)0x00000200) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 18 to 19 */
+#define FLASH_WRProt_Pages20to21 ((uint32_t)0x00000400) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 20 to 21 */
+#define FLASH_WRProt_Pages22to23 ((uint32_t)0x00000800) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 22 to 23 */
+#define FLASH_WRProt_Pages24to25 ((uint32_t)0x00001000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 24 to 25 */
+#define FLASH_WRProt_Pages26to27 ((uint32_t)0x00002000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 26 to 27 */
+#define FLASH_WRProt_Pages28to29 ((uint32_t)0x00004000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 28 to 29 */
+#define FLASH_WRProt_Pages30to31 ((uint32_t)0x00008000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 30 to 31 */
+#define FLASH_WRProt_Pages32to33 ((uint32_t)0x00010000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 32 to 33 */
+#define FLASH_WRProt_Pages34to35 ((uint32_t)0x00020000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 34 to 35 */
+#define FLASH_WRProt_Pages36to37 ((uint32_t)0x00040000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 36 to 37 */
+#define FLASH_WRProt_Pages38to39 ((uint32_t)0x00080000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 38 to 39 */
+#define FLASH_WRProt_Pages40to41 ((uint32_t)0x00100000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 40 to 41 */
+#define FLASH_WRProt_Pages42to43 ((uint32_t)0x00200000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 42 to 43 */
+#define FLASH_WRProt_Pages44to45 ((uint32_t)0x00400000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 44 to 45 */
+#define FLASH_WRProt_Pages46to47 ((uint32_t)0x00800000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 46 to 47 */
+#define FLASH_WRProt_Pages48to49 ((uint32_t)0x01000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 48 to 49 */
+#define FLASH_WRProt_Pages50to51 ((uint32_t)0x02000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 50 to 51 */
+#define FLASH_WRProt_Pages52to53 ((uint32_t)0x04000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 52 to 53 */
+#define FLASH_WRProt_Pages54to55 ((uint32_t)0x08000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 54 to 55 */
+#define FLASH_WRProt_Pages56to57 ((uint32_t)0x10000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 56 to 57 */
+#define FLASH_WRProt_Pages58to59 ((uint32_t)0x20000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 58 to 59 */
+#define FLASH_WRProt_Pages60to61 ((uint32_t)0x40000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+ Write protection of page 60 to 61 */
+#define FLASH_WRProt_Pages62to127 ((uint32_t)0x80000000) /*!< STM32 Connectivity line devices: Write protection of page 62 to 127 */
+#define FLASH_WRProt_Pages62to255 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 62 to 255 */
+#define FLASH_WRProt_Pages62to511 ((uint32_t)0x80000000) /*!< STM32 XL-density devices: Write protection of page 62 to 511 */
+
+#define FLASH_WRProt_AllPages ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Pages */
+
+#define IS_FLASH_WRPROT_PAGE(PAGE) (((PAGE) != 0x00000000))
+
+#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF))
+
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806))
+
+/**
+ * @}
+ */
+
+/** @defgroup Option_Bytes_IWatchdog
+ * @{
+ */
+
+#define OB_IWDG_SW ((uint16_t)0x0001) /*!< Software IWDG selected */
+#define OB_IWDG_HW ((uint16_t)0x0000) /*!< Hardware IWDG selected */
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+/**
+ * @}
+ */
+
+/** @defgroup Option_Bytes_nRST_STOP
+ * @{
+ */
+
+#define OB_STOP_NoRST ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST))
+
+/**
+ * @}
+ */
+
+/** @defgroup Option_Bytes_nRST_STDBY
+ * @{
+ */
+
+#define OB_STDBY_NoRST ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST))
+
+#ifdef STM32F10X_XL
+/**
+ * @}
+ */
+/** @defgroup FLASH_Boot
+ * @{
+ */
+#define FLASH_BOOT_Bank1 ((uint16_t)0x0000) /*!< At startup, if boot pins are set in boot from user Flash position
+ and this parameter is selected the device will boot from Bank1(Default) */
+#define FLASH_BOOT_Bank2 ((uint16_t)0x0001) /*!< At startup, if boot pins are set in boot from user Flash position
+ and this parameter is selected the device will boot from Bank 2 or Bank 1,
+ depending on the activation of the bank */
+#define IS_FLASH_BOOT(BOOT) (((BOOT) == FLASH_BOOT_Bank1) || ((BOOT) == FLASH_BOOT_Bank2))
+#endif
+/**
+ * @}
+ */
+/** @defgroup FLASH_Interrupts
+ * @{
+ */
+#ifdef STM32F10X_XL
+#define FLASH_IT_BANK2_ERROR ((uint32_t)0x80000400) /*!< FPEC BANK2 error interrupt source */
+#define FLASH_IT_BANK2_EOP ((uint32_t)0x80001000) /*!< End of FLASH BANK2 Operation Interrupt source */
+
+#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */
+#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */
+
+#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC BANK1 error interrupt source */
+#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH BANK1 Operation Interrupt source */
+#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0x7FFFEBFF) == 0x00000000) && (((IT) != 0x00000000)))
+#else
+#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC error interrupt source */
+#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_BANK1_ERROR FLASH_IT_ERROR /*!< FPEC BANK1 error interrupt source */
+#define FLASH_IT_BANK1_EOP FLASH_IT_EOP /*!< End of FLASH BANK1 Operation Interrupt source */
+
+#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000)))
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Flags
+ * @{
+ */
+#ifdef STM32F10X_XL
+#define FLASH_FLAG_BANK2_BSY ((uint32_t)0x80000001) /*!< FLASH BANK2 Busy flag */
+#define FLASH_FLAG_BANK2_EOP ((uint32_t)0x80000020) /*!< FLASH BANK2 End of Operation flag */
+#define FLASH_FLAG_BANK2_PGERR ((uint32_t)0x80000004) /*!< FLASH BANK2 Program error flag */
+#define FLASH_FLAG_BANK2_WRPRTERR ((uint32_t)0x80000010) /*!< FLASH BANK2 Write protected error flag */
+
+#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/
+#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */
+#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */
+#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */
+
+#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */
+#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */
+#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */
+
+#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0x7FFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000))
+#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \
+ ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \
+ ((FLAG) == FLASH_FLAG_OPTERR)|| \
+ ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \
+ ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \
+ ((FLAG) == FLASH_FLAG_BANK2_BSY) || ((FLAG) == FLASH_FLAG_BANK2_EOP) || \
+ ((FLAG) == FLASH_FLAG_BANK2_PGERR) || ((FLAG) == FLASH_FLAG_BANK2_WRPRTERR))
+#else
+#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */
+#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */
+#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */
+
+#define FLASH_FLAG_BANK1_BSY FLASH_FLAG_BSY /*!< FLASH BANK1 Busy flag*/
+#define FLASH_FLAG_BANK1_EOP FLASH_FLAG_EOP /*!< FLASH BANK1 End of Operation flag */
+#define FLASH_FLAG_BANK1_PGERR FLASH_FLAG_PGERR /*!< FLASH BANK1 Program error flag */
+#define FLASH_FLAG_BANK1_WRPRTERR FLASH_FLAG_WRPRTERR /*!< FLASH BANK1 Write protected error flag */
+
+#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000))
+#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \
+ ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \
+ ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \
+ ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \
+ ((FLAG) == FLASH_FLAG_OPTERR))
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Exported_Functions
+ * @{
+ */
+
+/*------------ Functions used for all STM32F10x devices -----*/
+void FLASH_SetLatency(uint32_t FLASH_Latency);
+void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess);
+void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer);
+void FLASH_Unlock(void);
+void FLASH_Lock(void);
+FLASH_Status FLASH_ErasePage(uint32_t Page_Address);
+FLASH_Status FLASH_EraseAllPages(void);
+FLASH_Status FLASH_EraseOptionBytes(void);
+FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data);
+FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data);
+FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data);
+FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages);
+FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState);
+FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY);
+uint32_t FLASH_GetUserOptionByte(void);
+uint32_t FLASH_GetWriteProtectionOptionByte(void);
+FlagStatus FLASH_GetReadOutProtectionStatus(void);
+FlagStatus FLASH_GetPrefetchBufferStatus(void);
+void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState);
+FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG);
+void FLASH_ClearFlag(uint32_t FLASH_FLAG);
+FLASH_Status FLASH_GetStatus(void);
+FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/*------------ New function used for all STM32F10x devices -----*/
+void FLASH_UnlockBank1(void);
+void FLASH_LockBank1(void);
+FLASH_Status FLASH_EraseAllBank1Pages(void);
+FLASH_Status FLASH_GetBank1Status(void);
+FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout);
+
+#ifdef STM32F10X_XL
+/*---- New Functions used only with STM32F10x_XL density devices -----*/
+void FLASH_UnlockBank2(void);
+void FLASH_LockBank2(void);
+FLASH_Status FLASH_EraseAllBank2Pages(void);
+FLASH_Status FLASH_GetBank2Status(void);
+FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout);
+FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_FLASH_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h
new file mode 100644
index 0000000..ee707e7
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h
@@ -0,0 +1,733 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_fsmc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the FSMC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_FSMC_H
+#define __STM32F10x_FSMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup FSMC
+ * @{
+ */
+
+/** @defgroup FSMC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief Timing parameters For NOR/SRAM Banks
+ */
+
+typedef struct
+{
+ uint32_t FSMC_AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between 0 and 0xF.
+ @note: It is not used with synchronous NOR Flash memories. */
+
+ uint32_t FSMC_AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between 0 and 0xF.
+ @note: It is not used with synchronous NOR Flash memories.*/
+
+ uint32_t FSMC_DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between 0 and 0xFF.
+ @note: It is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */
+
+ uint32_t FSMC_BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between 0 and 0xF.
+ @note: It is only used for multiplexed NOR Flash memories. */
+
+ uint32_t FSMC_CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles.
+ This parameter can be a value between 1 and 0xF.
+ @note: This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */
+
+ uint32_t FSMC_DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The value of this parameter depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between 0 and 0xF in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t FSMC_AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FSMC_Access_Mode */
+}FSMC_NORSRAMTimingInitTypeDef;
+
+/**
+ * @brief FSMC NOR/SRAM Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t FSMC_Bank; /*!< Specifies the NOR/SRAM memory bank that will be used.
+ This parameter can be a value of @ref FSMC_NORSRAM_Bank */
+
+ uint32_t FSMC_DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the databus or not.
+ This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t FSMC_MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory bank.
+ This parameter can be a value of @ref FSMC_Memory_Type */
+
+ uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FSMC_Data_Width */
+
+ uint32_t FSMC_BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FSMC_Burst_Access_Mode */
+
+ uint32_t FSMC_AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FSMC_AsynchronousWait */
+
+ uint32_t FSMC_WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */
+
+ uint32_t FSMC_WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
+ memory, valid only when accessing Flash memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wrap_Mode */
+
+ uint32_t FSMC_WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Timing */
+
+ uint32_t FSMC_WriteOperation; /*!< Enables or disables the write operation in the selected bank by the FSMC.
+ This parameter can be a value of @ref FSMC_Write_Operation */
+
+ uint32_t FSMC_WaitSignal; /*!< Enables or disables the wait-state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal */
+
+ uint32_t FSMC_ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FSMC_Extended_Mode */
+
+ uint32_t FSMC_WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FSMC_Write_Burst */
+
+ FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the ExtendedMode is not used*/
+
+ FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct; /*!< Timing Parameters for write access if the ExtendedMode is used*/
+}FSMC_NORSRAMInitTypeDef;
+
+/**
+ * @brief Timing parameters For FSMC NAND and PCCARD Banks
+ */
+
+typedef struct
+{
+ uint32_t FSMC_SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between 0 and 0xFF.*/
+
+ uint32_t FSMC_WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between 0x00 and 0xFF */
+
+ uint32_t FSMC_HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command deassertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between 0x00 and 0xFF */
+
+ uint32_t FSMC_HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ databus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between 0x00 and 0xFF */
+}FSMC_NAND_PCCARDTimingInitTypeDef;
+
+/**
+ * @brief FSMC NAND Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t FSMC_Bank; /*!< Specifies the NAND memory bank that will be used.
+ This parameter can be a value of @ref FSMC_NAND_Bank */
+
+ uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory Bank.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FSMC_Data_Width */
+
+ uint32_t FSMC_ECC; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FSMC_ECC */
+
+ uint32_t FSMC_ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FSMC_ECC_Page_Size */
+
+ uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between 0 and 0xFF. */
+
+ uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between 0x0 and 0xFF */
+
+ FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */
+
+ FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */
+}FSMC_NANDInitTypeDef;
+
+/**
+ * @brief FSMC PCCARD Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the Memory Bank.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between 0 and 0xFF. */
+
+ uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between 0x0 and 0xFF */
+
+
+ FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */
+
+ FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */
+
+ FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_IOSpaceTimingStruct; /*!< FSMC IO Space Timing */
+}FSMC_PCCARDInitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup FSMC_NORSRAM_Bank
+ * @{
+ */
+#define FSMC_Bank1_NORSRAM1 ((uint32_t)0x00000000)
+#define FSMC_Bank1_NORSRAM2 ((uint32_t)0x00000002)
+#define FSMC_Bank1_NORSRAM3 ((uint32_t)0x00000004)
+#define FSMC_Bank1_NORSRAM4 ((uint32_t)0x00000006)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NAND_Bank
+ * @{
+ */
+#define FSMC_Bank2_NAND ((uint32_t)0x00000010)
+#define FSMC_Bank3_NAND ((uint32_t)0x00000100)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_PCCARD_Bank
+ * @{
+ */
+#define FSMC_Bank4_PCCARD ((uint32_t)0x00001000)
+/**
+ * @}
+ */
+
+#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \
+ ((BANK) == FSMC_Bank1_NORSRAM2) || \
+ ((BANK) == FSMC_Bank1_NORSRAM3) || \
+ ((BANK) == FSMC_Bank1_NORSRAM4))
+
+#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
+ ((BANK) == FSMC_Bank3_NAND))
+
+#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
+ ((BANK) == FSMC_Bank3_NAND) || \
+ ((BANK) == FSMC_Bank4_PCCARD))
+
+#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
+ ((BANK) == FSMC_Bank3_NAND) || \
+ ((BANK) == FSMC_Bank4_PCCARD))
+
+/** @defgroup NOR_SRAM_Controller
+ * @{
+ */
+
+/** @defgroup FSMC_Data_Address_Bus_Multiplexing
+ * @{
+ */
+
+#define FSMC_DataAddressMux_Disable ((uint32_t)0x00000000)
+#define FSMC_DataAddressMux_Enable ((uint32_t)0x00000002)
+#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \
+ ((MUX) == FSMC_DataAddressMux_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Memory_Type
+ * @{
+ */
+
+#define FSMC_MemoryType_SRAM ((uint32_t)0x00000000)
+#define FSMC_MemoryType_PSRAM ((uint32_t)0x00000004)
+#define FSMC_MemoryType_NOR ((uint32_t)0x00000008)
+#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \
+ ((MEMORY) == FSMC_MemoryType_PSRAM)|| \
+ ((MEMORY) == FSMC_MemoryType_NOR))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Width
+ * @{
+ */
+
+#define FSMC_MemoryDataWidth_8b ((uint32_t)0x00000000)
+#define FSMC_MemoryDataWidth_16b ((uint32_t)0x00000010)
+#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \
+ ((WIDTH) == FSMC_MemoryDataWidth_16b))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Burst_Access_Mode
+ * @{
+ */
+
+#define FSMC_BurstAccessMode_Disable ((uint32_t)0x00000000)
+#define FSMC_BurstAccessMode_Enable ((uint32_t)0x00000100)
+#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \
+ ((STATE) == FSMC_BurstAccessMode_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_AsynchronousWait
+ * @{
+ */
+#define FSMC_AsynchronousWait_Disable ((uint32_t)0x00000000)
+#define FSMC_AsynchronousWait_Enable ((uint32_t)0x00008000)
+#define IS_FSMC_ASYNWAIT(STATE) (((STATE) == FSMC_AsynchronousWait_Disable) || \
+ ((STATE) == FSMC_AsynchronousWait_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Signal_Polarity
+ * @{
+ */
+
+#define FSMC_WaitSignalPolarity_Low ((uint32_t)0x00000000)
+#define FSMC_WaitSignalPolarity_High ((uint32_t)0x00000200)
+#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \
+ ((POLARITY) == FSMC_WaitSignalPolarity_High))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wrap_Mode
+ * @{
+ */
+
+#define FSMC_WrapMode_Disable ((uint32_t)0x00000000)
+#define FSMC_WrapMode_Enable ((uint32_t)0x00000400)
+#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \
+ ((MODE) == FSMC_WrapMode_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Timing
+ * @{
+ */
+
+#define FSMC_WaitSignalActive_BeforeWaitState ((uint32_t)0x00000000)
+#define FSMC_WaitSignalActive_DuringWaitState ((uint32_t)0x00000800)
+#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \
+ ((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Operation
+ * @{
+ */
+
+#define FSMC_WriteOperation_Disable ((uint32_t)0x00000000)
+#define FSMC_WriteOperation_Enable ((uint32_t)0x00001000)
+#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \
+ ((OPERATION) == FSMC_WriteOperation_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Signal
+ * @{
+ */
+
+#define FSMC_WaitSignal_Disable ((uint32_t)0x00000000)
+#define FSMC_WaitSignal_Enable ((uint32_t)0x00002000)
+#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \
+ ((SIGNAL) == FSMC_WaitSignal_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Extended_Mode
+ * @{
+ */
+
+#define FSMC_ExtendedMode_Disable ((uint32_t)0x00000000)
+#define FSMC_ExtendedMode_Enable ((uint32_t)0x00004000)
+
+#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \
+ ((MODE) == FSMC_ExtendedMode_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Burst
+ * @{
+ */
+
+#define FSMC_WriteBurst_Disable ((uint32_t)0x00000000)
+#define FSMC_WriteBurst_Enable ((uint32_t)0x00080000)
+#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \
+ ((BURST) == FSMC_WriteBurst_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Address_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Address_Hold_Time
+ * @{
+ */
+
+#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Bus_Turn_around_Duration
+ * @{
+ */
+
+#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_CLK_Division
+ * @{
+ */
+
+#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Latency
+ * @{
+ */
+
+#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Access_Mode
+ * @{
+ */
+
+#define FSMC_AccessMode_A ((uint32_t)0x00000000)
+#define FSMC_AccessMode_B ((uint32_t)0x10000000)
+#define FSMC_AccessMode_C ((uint32_t)0x20000000)
+#define FSMC_AccessMode_D ((uint32_t)0x30000000)
+#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \
+ ((MODE) == FSMC_AccessMode_B) || \
+ ((MODE) == FSMC_AccessMode_C) || \
+ ((MODE) == FSMC_AccessMode_D))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup NAND_PCCARD_Controller
+ * @{
+ */
+
+/** @defgroup FSMC_Wait_feature
+ * @{
+ */
+
+#define FSMC_Waitfeature_Disable ((uint32_t)0x00000000)
+#define FSMC_Waitfeature_Enable ((uint32_t)0x00000002)
+#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \
+ ((FEATURE) == FSMC_Waitfeature_Enable))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FSMC_ECC
+ * @{
+ */
+
+#define FSMC_ECC_Disable ((uint32_t)0x00000000)
+#define FSMC_ECC_Enable ((uint32_t)0x00000040)
+#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \
+ ((STATE) == FSMC_ECC_Enable))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_ECC_Page_Size
+ * @{
+ */
+
+#define FSMC_ECCPageSize_256Bytes ((uint32_t)0x00000000)
+#define FSMC_ECCPageSize_512Bytes ((uint32_t)0x00020000)
+#define FSMC_ECCPageSize_1024Bytes ((uint32_t)0x00040000)
+#define FSMC_ECCPageSize_2048Bytes ((uint32_t)0x00060000)
+#define FSMC_ECCPageSize_4096Bytes ((uint32_t)0x00080000)
+#define FSMC_ECCPageSize_8192Bytes ((uint32_t)0x000A0000)
+#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \
+ ((SIZE) == FSMC_ECCPageSize_512Bytes) || \
+ ((SIZE) == FSMC_ECCPageSize_1024Bytes) || \
+ ((SIZE) == FSMC_ECCPageSize_2048Bytes) || \
+ ((SIZE) == FSMC_ECCPageSize_4096Bytes) || \
+ ((SIZE) == FSMC_ECCPageSize_8192Bytes))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_TCLR_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_TAR_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Hold_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_HiZ_Setup_Time
+ * @{
+ */
+
+#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Interrupt_sources
+ * @{
+ */
+
+#define FSMC_IT_RisingEdge ((uint32_t)0x00000008)
+#define FSMC_IT_Level ((uint32_t)0x00000010)
+#define FSMC_IT_FallingEdge ((uint32_t)0x00000020)
+#define IS_FSMC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000))
+#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \
+ ((IT) == FSMC_IT_Level) || \
+ ((IT) == FSMC_IT_FallingEdge))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Flags
+ * @{
+ */
+
+#define FSMC_FLAG_RisingEdge ((uint32_t)0x00000001)
+#define FSMC_FLAG_Level ((uint32_t)0x00000002)
+#define FSMC_FLAG_FallingEdge ((uint32_t)0x00000004)
+#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040)
+#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \
+ ((FLAG) == FSMC_FLAG_Level) || \
+ ((FLAG) == FSMC_FLAG_FallingEdge) || \
+ ((FLAG) == FSMC_FLAG_FEMPT))
+
+#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Exported_Functions
+ * @{
+ */
+
+void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank);
+void FSMC_NANDDeInit(uint32_t FSMC_Bank);
+void FSMC_PCCARDDeInit(void);
+void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
+void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
+void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
+void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
+void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
+void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
+void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState);
+void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState);
+void FSMC_PCCARDCmd(FunctionalState NewState);
+void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState);
+uint32_t FSMC_GetECC(uint32_t FSMC_Bank);
+void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState);
+FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG);
+void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG);
+ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT);
+void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_FSMC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h
new file mode 100644
index 0000000..b8aa49a
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h
@@ -0,0 +1,385 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_gpio.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the GPIO
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_GPIO_H
+#define __STM32F10x_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/** @defgroup GPIO_Exported_Types
+ * @{
+ */
+
+#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
+ ((PERIPH) == GPIOB) || \
+ ((PERIPH) == GPIOC) || \
+ ((PERIPH) == GPIOD) || \
+ ((PERIPH) == GPIOE) || \
+ ((PERIPH) == GPIOF) || \
+ ((PERIPH) == GPIOG))
+
+/**
+ * @brief Output Maximum frequency selection
+ */
+
+typedef enum
+{
+ GPIO_Speed_10MHz = 1,
+ GPIO_Speed_2MHz,
+ GPIO_Speed_50MHz
+}GPIOSpeed_TypeDef;
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \
+ ((SPEED) == GPIO_Speed_50MHz))
+
+/**
+ * @brief Configuration Mode enumeration
+ */
+
+typedef enum
+{ GPIO_Mode_AIN = 0x0,
+ GPIO_Mode_IN_FLOATING = 0x04,
+ GPIO_Mode_IPD = 0x28,
+ GPIO_Mode_IPU = 0x48,
+ GPIO_Mode_Out_OD = 0x14,
+ GPIO_Mode_Out_PP = 0x10,
+ GPIO_Mode_AF_OD = 0x1C,
+ GPIO_Mode_AF_PP = 0x18
+}GPIOMode_TypeDef;
+
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \
+ ((MODE) == GPIO_Mode_IPD) || ((MODE) == GPIO_Mode_IPU) || \
+ ((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \
+ ((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP))
+
+/**
+ * @brief GPIO Init structure definition
+ */
+
+typedef struct
+{
+ uint16_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins_define */
+
+ GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIOSpeed_TypeDef */
+
+ GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIOMode_TypeDef */
+}GPIO_InitTypeDef;
+
+
+/**
+ * @brief Bit_SET and Bit_RESET enumeration
+ */
+
+typedef enum
+{ Bit_RESET = 0,
+ Bit_SET
+}BitAction;
+
+#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pins_define
+ * @{
+ */
+
+#define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */
+#define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */
+#define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */
+#define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */
+#define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */
+#define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */
+#define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */
+#define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */
+#define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */
+#define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */
+#define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */
+#define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */
+#define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */
+#define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */
+#define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */
+#define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */
+#define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */
+
+#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00))
+
+#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
+ ((PIN) == GPIO_Pin_1) || \
+ ((PIN) == GPIO_Pin_2) || \
+ ((PIN) == GPIO_Pin_3) || \
+ ((PIN) == GPIO_Pin_4) || \
+ ((PIN) == GPIO_Pin_5) || \
+ ((PIN) == GPIO_Pin_6) || \
+ ((PIN) == GPIO_Pin_7) || \
+ ((PIN) == GPIO_Pin_8) || \
+ ((PIN) == GPIO_Pin_9) || \
+ ((PIN) == GPIO_Pin_10) || \
+ ((PIN) == GPIO_Pin_11) || \
+ ((PIN) == GPIO_Pin_12) || \
+ ((PIN) == GPIO_Pin_13) || \
+ ((PIN) == GPIO_Pin_14) || \
+ ((PIN) == GPIO_Pin_15))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Remap_define
+ * @{
+ */
+
+#define GPIO_Remap_SPI1 ((uint32_t)0x00000001) /*!< SPI1 Alternate Function mapping */
+#define GPIO_Remap_I2C1 ((uint32_t)0x00000002) /*!< I2C1 Alternate Function mapping */
+#define GPIO_Remap_USART1 ((uint32_t)0x00000004) /*!< USART1 Alternate Function mapping */
+#define GPIO_Remap_USART2 ((uint32_t)0x00000008) /*!< USART2 Alternate Function mapping */
+#define GPIO_PartialRemap_USART3 ((uint32_t)0x00140010) /*!< USART3 Partial Alternate Function mapping */
+#define GPIO_FullRemap_USART3 ((uint32_t)0x00140030) /*!< USART3 Full Alternate Function mapping */
+#define GPIO_PartialRemap_TIM1 ((uint32_t)0x00160040) /*!< TIM1 Partial Alternate Function mapping */
+#define GPIO_FullRemap_TIM1 ((uint32_t)0x001600C0) /*!< TIM1 Full Alternate Function mapping */
+#define GPIO_PartialRemap1_TIM2 ((uint32_t)0x00180100) /*!< TIM2 Partial1 Alternate Function mapping */
+#define GPIO_PartialRemap2_TIM2 ((uint32_t)0x00180200) /*!< TIM2 Partial2 Alternate Function mapping */
+#define GPIO_FullRemap_TIM2 ((uint32_t)0x00180300) /*!< TIM2 Full Alternate Function mapping */
+#define GPIO_PartialRemap_TIM3 ((uint32_t)0x001A0800) /*!< TIM3 Partial Alternate Function mapping */
+#define GPIO_FullRemap_TIM3 ((uint32_t)0x001A0C00) /*!< TIM3 Full Alternate Function mapping */
+#define GPIO_Remap_TIM4 ((uint32_t)0x00001000) /*!< TIM4 Alternate Function mapping */
+#define GPIO_Remap1_CAN1 ((uint32_t)0x001D4000) /*!< CAN1 Alternate Function mapping */
+#define GPIO_Remap2_CAN1 ((uint32_t)0x001D6000) /*!< CAN1 Alternate Function mapping */
+#define GPIO_Remap_PD01 ((uint32_t)0x00008000) /*!< PD01 Alternate Function mapping */
+#define GPIO_Remap_TIM5CH4_LSI ((uint32_t)0x00200001) /*!< LSI connected to TIM5 Channel4 input capture for calibration */
+#define GPIO_Remap_ADC1_ETRGINJ ((uint32_t)0x00200002) /*!< ADC1 External Trigger Injected Conversion remapping */
+#define GPIO_Remap_ADC1_ETRGREG ((uint32_t)0x00200004) /*!< ADC1 External Trigger Regular Conversion remapping */
+#define GPIO_Remap_ADC2_ETRGINJ ((uint32_t)0x00200008) /*!< ADC2 External Trigger Injected Conversion remapping */
+#define GPIO_Remap_ADC2_ETRGREG ((uint32_t)0x00200010) /*!< ADC2 External Trigger Regular Conversion remapping */
+#define GPIO_Remap_ETH ((uint32_t)0x00200020) /*!< Ethernet remapping (only for Connectivity line devices) */
+#define GPIO_Remap_CAN2 ((uint32_t)0x00200040) /*!< CAN2 remapping (only for Connectivity line devices) */
+#define GPIO_Remap_SWJ_NoJTRST ((uint32_t)0x00300100) /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */
+#define GPIO_Remap_SWJ_JTAGDisable ((uint32_t)0x00300200) /*!< JTAG-DP Disabled and SW-DP Enabled */
+#define GPIO_Remap_SWJ_Disable ((uint32_t)0x00300400) /*!< Full SWJ Disabled (JTAG-DP + SW-DP) */
+#define GPIO_Remap_SPI3 ((uint32_t)0x00201100) /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */
+#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000) /*!< Ethernet PTP output or USB OTG SOF (Start of Frame) connected
+ to TIM2 Internal Trigger 1 for calibration
+ (only for Connectivity line devices) */
+#define GPIO_Remap_PTP_PPS ((uint32_t)0x00204000) /*!< Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) */
+
+#define GPIO_Remap_TIM15 ((uint32_t)0x80000001) /*!< TIM15 Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_TIM16 ((uint32_t)0x80000002) /*!< TIM16 Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_TIM17 ((uint32_t)0x80000004) /*!< TIM17 Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_CEC ((uint32_t)0x80000008) /*!< CEC Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_TIM1_DMA ((uint32_t)0x80000010) /*!< TIM1 DMA requests mapping (only for Value line devices) */
+
+#define GPIO_Remap_TIM9 ((uint32_t)0x80000020) /*!< TIM9 Alternate Function mapping (only for XL-density devices) */
+#define GPIO_Remap_TIM10 ((uint32_t)0x80000040) /*!< TIM10 Alternate Function mapping (only for XL-density devices) */
+#define GPIO_Remap_TIM11 ((uint32_t)0x80000080) /*!< TIM11 Alternate Function mapping (only for XL-density devices) */
+#define GPIO_Remap_TIM13 ((uint32_t)0x80000100) /*!< TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) */
+#define GPIO_Remap_TIM14 ((uint32_t)0x80000200) /*!< TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) */
+#define GPIO_Remap_FSMC_NADV ((uint32_t)0x80000400) /*!< FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) */
+
+#define GPIO_Remap_TIM67_DAC_DMA ((uint32_t)0x80000800) /*!< TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) */
+#define GPIO_Remap_TIM12 ((uint32_t)0x80001000) /*!< TIM12 Alternate Function mapping (only for High density Value line devices) */
+#define GPIO_Remap_MISC ((uint32_t)0x80002000) /*!< Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping,
+ only for High density Value line devices) */
+
+#define IS_GPIO_REMAP(REMAP) (((REMAP) == GPIO_Remap_SPI1) || ((REMAP) == GPIO_Remap_I2C1) || \
+ ((REMAP) == GPIO_Remap_USART1) || ((REMAP) == GPIO_Remap_USART2) || \
+ ((REMAP) == GPIO_PartialRemap_USART3) || ((REMAP) == GPIO_FullRemap_USART3) || \
+ ((REMAP) == GPIO_PartialRemap_TIM1) || ((REMAP) == GPIO_FullRemap_TIM1) || \
+ ((REMAP) == GPIO_PartialRemap1_TIM2) || ((REMAP) == GPIO_PartialRemap2_TIM2) || \
+ ((REMAP) == GPIO_FullRemap_TIM2) || ((REMAP) == GPIO_PartialRemap_TIM3) || \
+ ((REMAP) == GPIO_FullRemap_TIM3) || ((REMAP) == GPIO_Remap_TIM4) || \
+ ((REMAP) == GPIO_Remap1_CAN1) || ((REMAP) == GPIO_Remap2_CAN1) || \
+ ((REMAP) == GPIO_Remap_PD01) || ((REMAP) == GPIO_Remap_TIM5CH4_LSI) || \
+ ((REMAP) == GPIO_Remap_ADC1_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC1_ETRGREG) || \
+ ((REMAP) == GPIO_Remap_ADC2_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC2_ETRGREG) || \
+ ((REMAP) == GPIO_Remap_ETH) ||((REMAP) == GPIO_Remap_CAN2) || \
+ ((REMAP) == GPIO_Remap_SWJ_NoJTRST) || ((REMAP) == GPIO_Remap_SWJ_JTAGDisable) || \
+ ((REMAP) == GPIO_Remap_SWJ_Disable)|| ((REMAP) == GPIO_Remap_SPI3) || \
+ ((REMAP) == GPIO_Remap_TIM2ITR1_PTP_SOF) || ((REMAP) == GPIO_Remap_PTP_PPS) || \
+ ((REMAP) == GPIO_Remap_TIM15) || ((REMAP) == GPIO_Remap_TIM16) || \
+ ((REMAP) == GPIO_Remap_TIM17) || ((REMAP) == GPIO_Remap_CEC) || \
+ ((REMAP) == GPIO_Remap_TIM1_DMA) || ((REMAP) == GPIO_Remap_TIM9) || \
+ ((REMAP) == GPIO_Remap_TIM10) || ((REMAP) == GPIO_Remap_TIM11) || \
+ ((REMAP) == GPIO_Remap_TIM13) || ((REMAP) == GPIO_Remap_TIM14) || \
+ ((REMAP) == GPIO_Remap_FSMC_NADV) || ((REMAP) == GPIO_Remap_TIM67_DAC_DMA) || \
+ ((REMAP) == GPIO_Remap_TIM12) || ((REMAP) == GPIO_Remap_MISC))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Port_Sources
+ * @{
+ */
+
+#define GPIO_PortSourceGPIOA ((uint8_t)0x00)
+#define GPIO_PortSourceGPIOB ((uint8_t)0x01)
+#define GPIO_PortSourceGPIOC ((uint8_t)0x02)
+#define GPIO_PortSourceGPIOD ((uint8_t)0x03)
+#define GPIO_PortSourceGPIOE ((uint8_t)0x04)
+#define GPIO_PortSourceGPIOF ((uint8_t)0x05)
+#define GPIO_PortSourceGPIOG ((uint8_t)0x06)
+#define IS_GPIO_EVENTOUT_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOE))
+
+#define IS_GPIO_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOE) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOF) || \
+ ((PORTSOURCE) == GPIO_PortSourceGPIOG))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Pin_sources
+ * @{
+ */
+
+#define GPIO_PinSource0 ((uint8_t)0x00)
+#define GPIO_PinSource1 ((uint8_t)0x01)
+#define GPIO_PinSource2 ((uint8_t)0x02)
+#define GPIO_PinSource3 ((uint8_t)0x03)
+#define GPIO_PinSource4 ((uint8_t)0x04)
+#define GPIO_PinSource5 ((uint8_t)0x05)
+#define GPIO_PinSource6 ((uint8_t)0x06)
+#define GPIO_PinSource7 ((uint8_t)0x07)
+#define GPIO_PinSource8 ((uint8_t)0x08)
+#define GPIO_PinSource9 ((uint8_t)0x09)
+#define GPIO_PinSource10 ((uint8_t)0x0A)
+#define GPIO_PinSource11 ((uint8_t)0x0B)
+#define GPIO_PinSource12 ((uint8_t)0x0C)
+#define GPIO_PinSource13 ((uint8_t)0x0D)
+#define GPIO_PinSource14 ((uint8_t)0x0E)
+#define GPIO_PinSource15 ((uint8_t)0x0F)
+
+#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
+ ((PINSOURCE) == GPIO_PinSource1) || \
+ ((PINSOURCE) == GPIO_PinSource2) || \
+ ((PINSOURCE) == GPIO_PinSource3) || \
+ ((PINSOURCE) == GPIO_PinSource4) || \
+ ((PINSOURCE) == GPIO_PinSource5) || \
+ ((PINSOURCE) == GPIO_PinSource6) || \
+ ((PINSOURCE) == GPIO_PinSource7) || \
+ ((PINSOURCE) == GPIO_PinSource8) || \
+ ((PINSOURCE) == GPIO_PinSource9) || \
+ ((PINSOURCE) == GPIO_PinSource10) || \
+ ((PINSOURCE) == GPIO_PinSource11) || \
+ ((PINSOURCE) == GPIO_PinSource12) || \
+ ((PINSOURCE) == GPIO_PinSource13) || \
+ ((PINSOURCE) == GPIO_PinSource14) || \
+ ((PINSOURCE) == GPIO_PinSource15))
+
+/**
+ * @}
+ */
+
+/** @defgroup Ethernet_Media_Interface
+ * @{
+ */
+#define GPIO_ETH_MediaInterface_MII ((u32)0x00000000)
+#define GPIO_ETH_MediaInterface_RMII ((u32)0x00000001)
+
+#define IS_GPIO_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == GPIO_ETH_MediaInterface_MII) || \
+ ((INTERFACE) == GPIO_ETH_MediaInterface_RMII))
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Exported_Functions
+ * @{
+ */
+
+void GPIO_DeInit(GPIO_TypeDef* GPIOx);
+void GPIO_AFIODeInit(void);
+void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
+void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
+uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
+uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
+void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
+void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
+void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource);
+void GPIO_EventOutputCmd(FunctionalState NewState);
+void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState);
+void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource);
+void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_GPIO_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h
new file mode 100644
index 0000000..2d42e5c
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h
@@ -0,0 +1,684 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_i2c.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the I2C firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_I2C_H
+#define __STM32F10x_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/** @defgroup I2C_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief I2C Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t I2C_ClockSpeed; /*!< Specifies the clock frequency.
+ This parameter must be set to a value lower than 400kHz */
+
+ uint16_t I2C_Mode; /*!< Specifies the I2C mode.
+ This parameter can be a value of @ref I2C_mode */
+
+ uint16_t I2C_DutyCycle; /*!< Specifies the I2C fast mode duty cycle.
+ This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
+
+ uint16_t I2C_OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint16_t I2C_Ack; /*!< Enables or disables the acknowledgement.
+ This parameter can be a value of @ref I2C_acknowledgement */
+
+ uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged.
+ This parameter can be a value of @ref I2C_acknowledged_address */
+}I2C_InitTypeDef;
+
+/**
+ * @}
+ */
+
+
+/** @defgroup I2C_Exported_Constants
+ * @{
+ */
+
+#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \
+ ((PERIPH) == I2C2))
+/** @defgroup I2C_mode
+ * @{
+ */
+
+#define I2C_Mode_I2C ((uint16_t)0x0000)
+#define I2C_Mode_SMBusDevice ((uint16_t)0x0002)
+#define I2C_Mode_SMBusHost ((uint16_t)0x000A)
+#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \
+ ((MODE) == I2C_Mode_SMBusDevice) || \
+ ((MODE) == I2C_Mode_SMBusHost))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_duty_cycle_in_fast_mode
+ * @{
+ */
+
+#define I2C_DutyCycle_16_9 ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */
+#define I2C_DutyCycle_2 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */
+#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \
+ ((CYCLE) == I2C_DutyCycle_2))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_acknowledgement
+ * @{
+ */
+
+#define I2C_Ack_Enable ((uint16_t)0x0400)
+#define I2C_Ack_Disable ((uint16_t)0x0000)
+#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \
+ ((STATE) == I2C_Ack_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_transfer_direction
+ * @{
+ */
+
+#define I2C_Direction_Transmitter ((uint8_t)0x00)
+#define I2C_Direction_Receiver ((uint8_t)0x01)
+#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \
+ ((DIRECTION) == I2C_Direction_Receiver))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_acknowledged_address
+ * @{
+ */
+
+#define I2C_AcknowledgedAddress_7bit ((uint16_t)0x4000)
+#define I2C_AcknowledgedAddress_10bit ((uint16_t)0xC000)
+#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \
+ ((ADDRESS) == I2C_AcknowledgedAddress_10bit))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_registers
+ * @{
+ */
+
+#define I2C_Register_CR1 ((uint8_t)0x00)
+#define I2C_Register_CR2 ((uint8_t)0x04)
+#define I2C_Register_OAR1 ((uint8_t)0x08)
+#define I2C_Register_OAR2 ((uint8_t)0x0C)
+#define I2C_Register_DR ((uint8_t)0x10)
+#define I2C_Register_SR1 ((uint8_t)0x14)
+#define I2C_Register_SR2 ((uint8_t)0x18)
+#define I2C_Register_CCR ((uint8_t)0x1C)
+#define I2C_Register_TRISE ((uint8_t)0x20)
+#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \
+ ((REGISTER) == I2C_Register_CR2) || \
+ ((REGISTER) == I2C_Register_OAR1) || \
+ ((REGISTER) == I2C_Register_OAR2) || \
+ ((REGISTER) == I2C_Register_DR) || \
+ ((REGISTER) == I2C_Register_SR1) || \
+ ((REGISTER) == I2C_Register_SR2) || \
+ ((REGISTER) == I2C_Register_CCR) || \
+ ((REGISTER) == I2C_Register_TRISE))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_SMBus_alert_pin_level
+ * @{
+ */
+
+#define I2C_SMBusAlert_Low ((uint16_t)0x2000)
+#define I2C_SMBusAlert_High ((uint16_t)0xDFFF)
+#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \
+ ((ALERT) == I2C_SMBusAlert_High))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_PEC_position
+ * @{
+ */
+
+#define I2C_PECPosition_Next ((uint16_t)0x0800)
+#define I2C_PECPosition_Current ((uint16_t)0xF7FF)
+#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \
+ ((POSITION) == I2C_PECPosition_Current))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_NCAK_position
+ * @{
+ */
+
+#define I2C_NACKPosition_Next ((uint16_t)0x0800)
+#define I2C_NACKPosition_Current ((uint16_t)0xF7FF)
+#define IS_I2C_NACK_POSITION(POSITION) (((POSITION) == I2C_NACKPosition_Next) || \
+ ((POSITION) == I2C_NACKPosition_Current))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_interrupts_definition
+ * @{
+ */
+
+#define I2C_IT_BUF ((uint16_t)0x0400)
+#define I2C_IT_EVT ((uint16_t)0x0200)
+#define I2C_IT_ERR ((uint16_t)0x0100)
+#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_interrupts_definition
+ * @{
+ */
+
+#define I2C_IT_SMBALERT ((uint32_t)0x01008000)
+#define I2C_IT_TIMEOUT ((uint32_t)0x01004000)
+#define I2C_IT_PECERR ((uint32_t)0x01001000)
+#define I2C_IT_OVR ((uint32_t)0x01000800)
+#define I2C_IT_AF ((uint32_t)0x01000400)
+#define I2C_IT_ARLO ((uint32_t)0x01000200)
+#define I2C_IT_BERR ((uint32_t)0x01000100)
+#define I2C_IT_TXE ((uint32_t)0x06000080)
+#define I2C_IT_RXNE ((uint32_t)0x06000040)
+#define I2C_IT_STOPF ((uint32_t)0x02000010)
+#define I2C_IT_ADD10 ((uint32_t)0x02000008)
+#define I2C_IT_BTF ((uint32_t)0x02000004)
+#define I2C_IT_ADDR ((uint32_t)0x02000002)
+#define I2C_IT_SB ((uint32_t)0x02000001)
+
+#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00))
+
+#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \
+ ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \
+ ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \
+ ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \
+ ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \
+ ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \
+ ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_flags_definition
+ * @{
+ */
+
+/**
+ * @brief SR2 register flags
+ */
+
+#define I2C_FLAG_DUALF ((uint32_t)0x00800000)
+#define I2C_FLAG_SMBHOST ((uint32_t)0x00400000)
+#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00200000)
+#define I2C_FLAG_GENCALL ((uint32_t)0x00100000)
+#define I2C_FLAG_TRA ((uint32_t)0x00040000)
+#define I2C_FLAG_BUSY ((uint32_t)0x00020000)
+#define I2C_FLAG_MSL ((uint32_t)0x00010000)
+
+/**
+ * @brief SR1 register flags
+ */
+
+#define I2C_FLAG_SMBALERT ((uint32_t)0x10008000)
+#define I2C_FLAG_TIMEOUT ((uint32_t)0x10004000)
+#define I2C_FLAG_PECERR ((uint32_t)0x10001000)
+#define I2C_FLAG_OVR ((uint32_t)0x10000800)
+#define I2C_FLAG_AF ((uint32_t)0x10000400)
+#define I2C_FLAG_ARLO ((uint32_t)0x10000200)
+#define I2C_FLAG_BERR ((uint32_t)0x10000100)
+#define I2C_FLAG_TXE ((uint32_t)0x10000080)
+#define I2C_FLAG_RXNE ((uint32_t)0x10000040)
+#define I2C_FLAG_STOPF ((uint32_t)0x10000010)
+#define I2C_FLAG_ADD10 ((uint32_t)0x10000008)
+#define I2C_FLAG_BTF ((uint32_t)0x10000004)
+#define I2C_FLAG_ADDR ((uint32_t)0x10000002)
+#define I2C_FLAG_SB ((uint32_t)0x10000001)
+
+#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00))
+
+#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \
+ ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \
+ ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \
+ ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \
+ ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \
+ ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \
+ ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \
+ ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \
+ ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \
+ ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \
+ ((FLAG) == I2C_FLAG_SB))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Events
+ * @{
+ */
+
+/*========================================
+
+ I2C Master Events (Events grouped in order of communication)
+ ==========================================*/
+/**
+ * @brief Communication start
+ *
+ * After sending the START condition (I2C_GenerateSTART() function) the master
+ * has to wait for this event. It means that the Start condition has been correctly
+ * released on the I2C bus (the bus is free, no other devices is communicating).
+ *
+ */
+/* --EV5 */
+#define I2C_EVENT_MASTER_MODE_SELECT ((uint32_t)0x00030001) /* BUSY, MSL and SB flag */
+
+/**
+ * @brief Address Acknowledge
+ *
+ * After checking on EV5 (start condition correctly released on the bus), the
+ * master sends the address of the slave(s) with which it will communicate
+ * (I2C_Send7bitAddress() function, it also determines the direction of the communication:
+ * Master transmitter or Receiver). Then the master has to wait that a slave acknowledges
+ * his address. If an acknowledge is sent on the bus, one of the following events will
+ * be set:
+ *
+ * 1) In case of Master Receiver (7-bit addressing): the I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED
+ * event is set.
+ *
+ * 2) In case of Master Transmitter (7-bit addressing): the I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED
+ * is set
+ *
+ * 3) In case of 10-Bit addressing mode, the master (just after generating the START
+ * and checking on EV5) has to send the header of 10-bit addressing mode (I2C_SendData()
+ * function). Then master should wait on EV9. It means that the 10-bit addressing
+ * header has been correctly sent on the bus. Then master should send the second part of
+ * the 10-bit address (LSB) using the function I2C_Send7bitAddress(). Then master
+ * should wait for event EV6.
+ *
+ */
+
+/* --EV6 */
+#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((uint32_t)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */
+#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((uint32_t)0x00030002) /* BUSY, MSL and ADDR flags */
+/* --EV9 */
+#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((uint32_t)0x00030008) /* BUSY, MSL and ADD10 flags */
+
+/**
+ * @brief Communication events
+ *
+ * If a communication is established (START condition generated and slave address
+ * acknowledged) then the master has to check on one of the following events for
+ * communication procedures:
+ *
+ * 1) Master Receiver mode: The master has to wait on the event EV7 then to read
+ * the data received from the slave (I2C_ReceiveData() function).
+ *
+ * 2) Master Transmitter mode: The master has to send data (I2C_SendData()
+ * function) then to wait on event EV8 or EV8_2.
+ * These two events are similar:
+ * - EV8 means that the data has been written in the data register and is
+ * being shifted out.
+ * - EV8_2 means that the data has been physically shifted out and output
+ * on the bus.
+ * In most cases, using EV8 is sufficient for the application.
+ * Using EV8_2 leads to a slower communication but ensure more reliable test.
+ * EV8_2 is also more suitable than EV8 for testing on the last data transmission
+ * (before Stop condition generation).
+ *
+ * @note In case the user software does not guarantee that this event EV7 is
+ * managed before the current byte end of transfer, then user may check on EV7
+ * and BTF flag at the same time (ie. (I2C_EVENT_MASTER_BYTE_RECEIVED | I2C_FLAG_BTF)).
+ * In this case the communication may be slower.
+ *
+ */
+
+/* Master RECEIVER mode -----------------------------*/
+/* --EV7 */
+#define I2C_EVENT_MASTER_BYTE_RECEIVED ((uint32_t)0x00030040) /* BUSY, MSL and RXNE flags */
+
+/* Master TRANSMITTER mode --------------------------*/
+/* --EV8 */
+#define I2C_EVENT_MASTER_BYTE_TRANSMITTING ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */
+/* --EV8_2 */
+#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((uint32_t)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */
+
+
+/*========================================
+
+ I2C Slave Events (Events grouped in order of communication)
+ ==========================================*/
+
+/**
+ * @brief Communication start events
+ *
+ * Wait on one of these events at the start of the communication. It means that
+ * the I2C peripheral detected a Start condition on the bus (generated by master
+ * device) followed by the peripheral address. The peripheral generates an ACK
+ * condition on the bus (if the acknowledge feature is enabled through function
+ * I2C_AcknowledgeConfig()) and the events listed above are set :
+ *
+ * 1) In normal case (only one address managed by the slave), when the address
+ * sent by the master matches the own address of the peripheral (configured by
+ * I2C_OwnAddress1 field) the I2C_EVENT_SLAVE_XXX_ADDRESS_MATCHED event is set
+ * (where XXX could be TRANSMITTER or RECEIVER).
+ *
+ * 2) In case the address sent by the master matches the second address of the
+ * peripheral (configured by the function I2C_OwnAddress2Config() and enabled
+ * by the function I2C_DualAddressCmd()) the events I2C_EVENT_SLAVE_XXX_SECONDADDRESS_MATCHED
+ * (where XXX could be TRANSMITTER or RECEIVER) are set.
+ *
+ * 3) In case the address sent by the master is General Call (address 0x00) and
+ * if the General Call is enabled for the peripheral (using function I2C_GeneralCallCmd())
+ * the following event is set I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED.
+ *
+ */
+
+/* --EV1 (all the events below are variants of EV1) */
+/* 1) Case of One Single Address managed by the slave */
+#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */
+#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */
+
+/* 2) Case of Dual address managed by the slave */
+#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((uint32_t)0x00820000) /* DUALF and BUSY flags */
+#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080) /* DUALF, TRA, BUSY and TXE flags */
+
+/* 3) Case of General Call enabled for the slave */
+#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((uint32_t)0x00120000) /* GENCALL and BUSY flags */
+
+/**
+ * @brief Communication events
+ *
+ * Wait on one of these events when EV1 has already been checked and:
+ *
+ * - Slave RECEIVER mode:
+ * - EV2: When the application is expecting a data byte to be received.
+ * - EV4: When the application is expecting the end of the communication: master
+ * sends a stop condition and data transmission is stopped.
+ *
+ * - Slave Transmitter mode:
+ * - EV3: When a byte has been transmitted by the slave and the application is expecting
+ * the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and
+ * I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be
+ * used when the user software doesn't guarantee the EV3 is managed before the
+ * current byte end of transfer.
+ * - EV3_2: When the master sends a NACK in order to tell slave that data transmission
+ * shall end (before sending the STOP condition). In this case slave has to stop sending
+ * data bytes and expect a Stop condition on the bus.
+ *
+ * @note In case the user software does not guarantee that the event EV2 is
+ * managed before the current byte end of transfer, then user may check on EV2
+ * and BTF flag at the same time (ie. (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_BTF)).
+ * In this case the communication may be slower.
+ *
+ */
+
+/* Slave RECEIVER mode --------------------------*/
+/* --EV2 */
+#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */
+/* --EV4 */
+#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */
+
+/* Slave TRANSMITTER mode -----------------------*/
+/* --EV3 */
+#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */
+#define I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */
+/* --EV3_2 */
+#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */
+
+/*=========================== End of Events Description ==========================================*/
+
+#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \
+ ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \
+ ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \
+ ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \
+ ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \
+ ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \
+ ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \
+ ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \
+ ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \
+ ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \
+ ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \
+ ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \
+ ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \
+ ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \
+ ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \
+ ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \
+ ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \
+ ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \
+ ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \
+ ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_own_address1
+ * @{
+ */
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_clock_speed
+ * @{
+ */
+
+#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Exported_Functions
+ * @{
+ */
+
+void I2C_DeInit(I2C_TypeDef* I2Cx);
+void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct);
+void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct);
+void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address);
+void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState);
+void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data);
+uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx);
+void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction);
+uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register);
+void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition);
+void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert);
+void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition);
+void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
+uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx);
+void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle);
+
+/**
+ * @brief
+ ****************************************************************************************
+ *
+ * I2C State Monitoring Functions
+ *
+ ****************************************************************************************
+ * This I2C driver provides three different ways for I2C state monitoring
+ * depending on the application requirements and constraints:
+ *
+ *
+ * 1) Basic state monitoring:
+ * Using I2C_CheckEvent() function:
+ * It compares the status registers (SR1 and SR2) content to a given event
+ * (can be the combination of one or more flags).
+ * It returns SUCCESS if the current status includes the given flags
+ * and returns ERROR if one or more flags are missing in the current status.
+ * - When to use:
+ * - This function is suitable for most applications as well as for startup
+ * activity since the events are fully described in the product reference manual
+ * (RM0008).
+ * - It is also suitable for users who need to define their own events.
+ * - Limitations:
+ * - If an error occurs (ie. error flags are set besides to the monitored flags),
+ * the I2C_CheckEvent() function may return SUCCESS despite the communication
+ * hold or corrupted real state.
+ * In this case, it is advised to use error interrupts to monitor the error
+ * events and handle them in the interrupt IRQ handler.
+ *
+ * @note
+ * For error management, it is advised to use the following functions:
+ * - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR).
+ * - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs.
+ * Where x is the peripheral instance (I2C1, I2C2 ...)
+ * - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler()
+ * in order to determine which error occurred.
+ * - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd()
+ * and/or I2C_GenerateStop() in order to clear the error flag and source,
+ * and return to correct communication status.
+ *
+ *
+ * 2) Advanced state monitoring:
+ * Using the function I2C_GetLastEvent() which returns the image of both status
+ * registers in a single word (uint32_t) (Status Register 2 value is shifted left
+ * by 16 bits and concatenated to Status Register 1).
+ * - When to use:
+ * - This function is suitable for the same applications above but it allows to
+ * overcome the limitations of I2C_GetFlagStatus() function (see below).
+ * The returned value could be compared to events already defined in the
+ * library (stm32f10x_i2c.h) or to custom values defined by user.
+ * - This function is suitable when multiple flags are monitored at the same time.
+ * - At the opposite of I2C_CheckEvent() function, this function allows user to
+ * choose when an event is accepted (when all events flags are set and no
+ * other flags are set or just when the needed flags are set like
+ * I2C_CheckEvent() function).
+ * - Limitations:
+ * - User may need to define his own events.
+ * - Same remark concerning the error management is applicable for this
+ * function if user decides to check only regular communication flags (and
+ * ignores error flags).
+ *
+ *
+ * 3) Flag-based state monitoring:
+ * Using the function I2C_GetFlagStatus() which simply returns the status of
+ * one single flag (ie. I2C_FLAG_RXNE ...).
+ * - When to use:
+ * - This function could be used for specific applications or in debug phase.
+ * - It is suitable when only one flag checking is needed (most I2C events
+ * are monitored through multiple flags).
+ * - Limitations:
+ * - When calling this function, the Status register is accessed. Some flags are
+ * cleared when the status register is accessed. So checking the status
+ * of one Flag, may clear other ones.
+ * - Function may need to be called twice or more in order to monitor one
+ * single event.
+ *
+ */
+
+/**
+ *
+ * 1) Basic state monitoring
+ *******************************************************************************
+ */
+ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT);
+/**
+ *
+ * 2) Advanced state monitoring
+ *******************************************************************************
+ */
+uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx);
+/**
+ *
+ * 3) Flag-based state monitoring
+ *******************************************************************************
+ */
+FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG);
+/**
+ *
+ *******************************************************************************
+ */
+
+void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG);
+ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
+void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_I2C_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_iwdg.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_iwdg.h
new file mode 100644
index 0000000..7f5ab76
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_iwdg.h
@@ -0,0 +1,140 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_iwdg.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the IWDG
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_IWDG_H
+#define __STM32F10x_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup IWDG
+ * @{
+ */
+
+/** @defgroup IWDG_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Exported_Constants
+ * @{
+ */
+
+/** @defgroup IWDG_WriteAccess
+ * @{
+ */
+
+#define IWDG_WriteAccess_Enable ((uint16_t)0x5555)
+#define IWDG_WriteAccess_Disable ((uint16_t)0x0000)
+#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \
+ ((ACCESS) == IWDG_WriteAccess_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_prescaler
+ * @{
+ */
+
+#define IWDG_Prescaler_4 ((uint8_t)0x00)
+#define IWDG_Prescaler_8 ((uint8_t)0x01)
+#define IWDG_Prescaler_16 ((uint8_t)0x02)
+#define IWDG_Prescaler_32 ((uint8_t)0x03)
+#define IWDG_Prescaler_64 ((uint8_t)0x04)
+#define IWDG_Prescaler_128 ((uint8_t)0x05)
+#define IWDG_Prescaler_256 ((uint8_t)0x06)
+#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4) || \
+ ((PRESCALER) == IWDG_Prescaler_8) || \
+ ((PRESCALER) == IWDG_Prescaler_16) || \
+ ((PRESCALER) == IWDG_Prescaler_32) || \
+ ((PRESCALER) == IWDG_Prescaler_64) || \
+ ((PRESCALER) == IWDG_Prescaler_128)|| \
+ ((PRESCALER) == IWDG_Prescaler_256))
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Flag
+ * @{
+ */
+
+#define IWDG_FLAG_PVU ((uint16_t)0x0001)
+#define IWDG_FLAG_RVU ((uint16_t)0x0002)
+#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU))
+#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Exported_Functions
+ * @{
+ */
+
+void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess);
+void IWDG_SetPrescaler(uint8_t IWDG_Prescaler);
+void IWDG_SetReload(uint16_t Reload);
+void IWDG_ReloadCounter(void);
+void IWDG_Enable(void);
+FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_IWDG_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_pwr.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_pwr.h
new file mode 100644
index 0000000..76e6ce9
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_pwr.h
@@ -0,0 +1,156 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_pwr.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the PWR firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_PWR_H
+#define __STM32F10x_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup PWR
+ * @{
+ */
+
+/** @defgroup PWR_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Constants
+ * @{
+ */
+
+/** @defgroup PVD_detection_level
+ * @{
+ */
+
+#define PWR_PVDLevel_2V2 ((uint32_t)0x00000000)
+#define PWR_PVDLevel_2V3 ((uint32_t)0x00000020)
+#define PWR_PVDLevel_2V4 ((uint32_t)0x00000040)
+#define PWR_PVDLevel_2V5 ((uint32_t)0x00000060)
+#define PWR_PVDLevel_2V6 ((uint32_t)0x00000080)
+#define PWR_PVDLevel_2V7 ((uint32_t)0x000000A0)
+#define PWR_PVDLevel_2V8 ((uint32_t)0x000000C0)
+#define PWR_PVDLevel_2V9 ((uint32_t)0x000000E0)
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_2V2) || ((LEVEL) == PWR_PVDLevel_2V3)|| \
+ ((LEVEL) == PWR_PVDLevel_2V4) || ((LEVEL) == PWR_PVDLevel_2V5)|| \
+ ((LEVEL) == PWR_PVDLevel_2V6) || ((LEVEL) == PWR_PVDLevel_2V7)|| \
+ ((LEVEL) == PWR_PVDLevel_2V8) || ((LEVEL) == PWR_PVDLevel_2V9))
+/**
+ * @}
+ */
+
+/** @defgroup Regulator_state_is_STOP_mode
+ * @{
+ */
+
+#define PWR_Regulator_ON ((uint32_t)0x00000000)
+#define PWR_Regulator_LowPower ((uint32_t)0x00000001)
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \
+ ((REGULATOR) == PWR_Regulator_LowPower))
+/**
+ * @}
+ */
+
+/** @defgroup STOP_mode_entry
+ * @{
+ */
+
+#define PWR_STOPEntry_WFI ((uint8_t)0x01)
+#define PWR_STOPEntry_WFE ((uint8_t)0x02)
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE))
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Flag
+ * @{
+ */
+
+#define PWR_FLAG_WU ((uint32_t)0x00000001)
+#define PWR_FLAG_SB ((uint32_t)0x00000002)
+#define PWR_FLAG_PVDO ((uint32_t)0x00000004)
+#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
+ ((FLAG) == PWR_FLAG_PVDO))
+
+#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Functions
+ * @{
+ */
+
+void PWR_DeInit(void);
+void PWR_BackupAccessCmd(FunctionalState NewState);
+void PWR_PVDCmd(FunctionalState NewState);
+void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel);
+void PWR_WakeUpPinCmd(FunctionalState NewState);
+void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
+void PWR_EnterSTANDBYMode(void);
+FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG);
+void PWR_ClearFlag(uint32_t PWR_FLAG);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_PWR_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h
new file mode 100644
index 0000000..b3b7d82
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h
@@ -0,0 +1,727 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_rcc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the RCC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_RCC_H
+#define __STM32F10x_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/** @defgroup RCC_Exported_Types
+ * @{
+ */
+
+typedef struct
+{
+ uint32_t SYSCLK_Frequency; /*!< returns SYSCLK clock frequency expressed in Hz */
+ uint32_t HCLK_Frequency; /*!< returns HCLK clock frequency expressed in Hz */
+ uint32_t PCLK1_Frequency; /*!< returns PCLK1 clock frequency expressed in Hz */
+ uint32_t PCLK2_Frequency; /*!< returns PCLK2 clock frequency expressed in Hz */
+ uint32_t ADCCLK_Frequency; /*!< returns ADCCLK clock frequency expressed in Hz */
+}RCC_ClocksTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup HSE_configuration
+ * @{
+ */
+
+#define RCC_HSE_OFF ((uint32_t)0x00000000)
+#define RCC_HSE_ON ((uint32_t)0x00010000)
+#define RCC_HSE_Bypass ((uint32_t)0x00040000)
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+ ((HSE) == RCC_HSE_Bypass))
+
+/**
+ * @}
+ */
+
+/** @defgroup PLL_entry_clock_source
+ * @{
+ */
+
+#define RCC_PLLSource_HSI_Div2 ((uint32_t)0x00000000)
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_CL)
+ #define RCC_PLLSource_HSE_Div1 ((uint32_t)0x00010000)
+ #define RCC_PLLSource_HSE_Div2 ((uint32_t)0x00030000)
+ #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \
+ ((SOURCE) == RCC_PLLSource_HSE_Div1) || \
+ ((SOURCE) == RCC_PLLSource_HSE_Div2))
+#else
+ #define RCC_PLLSource_PREDIV1 ((uint32_t)0x00010000)
+ #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \
+ ((SOURCE) == RCC_PLLSource_PREDIV1))
+#endif /* STM32F10X_CL */
+
+/**
+ * @}
+ */
+
+/** @defgroup PLL_multiplication_factor
+ * @{
+ */
+#ifndef STM32F10X_CL
+ #define RCC_PLLMul_2 ((uint32_t)0x00000000)
+ #define RCC_PLLMul_3 ((uint32_t)0x00040000)
+ #define RCC_PLLMul_4 ((uint32_t)0x00080000)
+ #define RCC_PLLMul_5 ((uint32_t)0x000C0000)
+ #define RCC_PLLMul_6 ((uint32_t)0x00100000)
+ #define RCC_PLLMul_7 ((uint32_t)0x00140000)
+ #define RCC_PLLMul_8 ((uint32_t)0x00180000)
+ #define RCC_PLLMul_9 ((uint32_t)0x001C0000)
+ #define RCC_PLLMul_10 ((uint32_t)0x00200000)
+ #define RCC_PLLMul_11 ((uint32_t)0x00240000)
+ #define RCC_PLLMul_12 ((uint32_t)0x00280000)
+ #define RCC_PLLMul_13 ((uint32_t)0x002C0000)
+ #define RCC_PLLMul_14 ((uint32_t)0x00300000)
+ #define RCC_PLLMul_15 ((uint32_t)0x00340000)
+ #define RCC_PLLMul_16 ((uint32_t)0x00380000)
+ #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3) || \
+ ((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \
+ ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \
+ ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \
+ ((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \
+ ((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \
+ ((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \
+ ((MUL) == RCC_PLLMul_16))
+
+#else
+ #define RCC_PLLMul_4 ((uint32_t)0x00080000)
+ #define RCC_PLLMul_5 ((uint32_t)0x000C0000)
+ #define RCC_PLLMul_6 ((uint32_t)0x00100000)
+ #define RCC_PLLMul_7 ((uint32_t)0x00140000)
+ #define RCC_PLLMul_8 ((uint32_t)0x00180000)
+ #define RCC_PLLMul_9 ((uint32_t)0x001C0000)
+ #define RCC_PLLMul_6_5 ((uint32_t)0x00340000)
+
+ #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \
+ ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \
+ ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \
+ ((MUL) == RCC_PLLMul_6_5))
+#endif /* STM32F10X_CL */
+/**
+ * @}
+ */
+
+/** @defgroup PREDIV1_division_factor
+ * @{
+ */
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+ #define RCC_PREDIV1_Div1 ((uint32_t)0x00000000)
+ #define RCC_PREDIV1_Div2 ((uint32_t)0x00000001)
+ #define RCC_PREDIV1_Div3 ((uint32_t)0x00000002)
+ #define RCC_PREDIV1_Div4 ((uint32_t)0x00000003)
+ #define RCC_PREDIV1_Div5 ((uint32_t)0x00000004)
+ #define RCC_PREDIV1_Div6 ((uint32_t)0x00000005)
+ #define RCC_PREDIV1_Div7 ((uint32_t)0x00000006)
+ #define RCC_PREDIV1_Div8 ((uint32_t)0x00000007)
+ #define RCC_PREDIV1_Div9 ((uint32_t)0x00000008)
+ #define RCC_PREDIV1_Div10 ((uint32_t)0x00000009)
+ #define RCC_PREDIV1_Div11 ((uint32_t)0x0000000A)
+ #define RCC_PREDIV1_Div12 ((uint32_t)0x0000000B)
+ #define RCC_PREDIV1_Div13 ((uint32_t)0x0000000C)
+ #define RCC_PREDIV1_Div14 ((uint32_t)0x0000000D)
+ #define RCC_PREDIV1_Div15 ((uint32_t)0x0000000E)
+ #define RCC_PREDIV1_Div16 ((uint32_t)0x0000000F)
+
+ #define IS_RCC_PREDIV1(PREDIV1) (((PREDIV1) == RCC_PREDIV1_Div1) || ((PREDIV1) == RCC_PREDIV1_Div2) || \
+ ((PREDIV1) == RCC_PREDIV1_Div3) || ((PREDIV1) == RCC_PREDIV1_Div4) || \
+ ((PREDIV1) == RCC_PREDIV1_Div5) || ((PREDIV1) == RCC_PREDIV1_Div6) || \
+ ((PREDIV1) == RCC_PREDIV1_Div7) || ((PREDIV1) == RCC_PREDIV1_Div8) || \
+ ((PREDIV1) == RCC_PREDIV1_Div9) || ((PREDIV1) == RCC_PREDIV1_Div10) || \
+ ((PREDIV1) == RCC_PREDIV1_Div11) || ((PREDIV1) == RCC_PREDIV1_Div12) || \
+ ((PREDIV1) == RCC_PREDIV1_Div13) || ((PREDIV1) == RCC_PREDIV1_Div14) || \
+ ((PREDIV1) == RCC_PREDIV1_Div15) || ((PREDIV1) == RCC_PREDIV1_Div16))
+#endif
+/**
+ * @}
+ */
+
+
+/** @defgroup PREDIV1_clock_source
+ * @{
+ */
+#ifdef STM32F10X_CL
+/* PREDIV1 clock source (for STM32 connectivity line devices) */
+ #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000)
+ #define RCC_PREDIV1_Source_PLL2 ((uint32_t)0x00010000)
+
+ #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE) || \
+ ((SOURCE) == RCC_PREDIV1_Source_PLL2))
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/* PREDIV1 clock source (for STM32 Value line devices) */
+ #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000)
+
+ #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE))
+#endif
+/**
+ * @}
+ */
+
+#ifdef STM32F10X_CL
+/** @defgroup PREDIV2_division_factor
+ * @{
+ */
+
+ #define RCC_PREDIV2_Div1 ((uint32_t)0x00000000)
+ #define RCC_PREDIV2_Div2 ((uint32_t)0x00000010)
+ #define RCC_PREDIV2_Div3 ((uint32_t)0x00000020)
+ #define RCC_PREDIV2_Div4 ((uint32_t)0x00000030)
+ #define RCC_PREDIV2_Div5 ((uint32_t)0x00000040)
+ #define RCC_PREDIV2_Div6 ((uint32_t)0x00000050)
+ #define RCC_PREDIV2_Div7 ((uint32_t)0x00000060)
+ #define RCC_PREDIV2_Div8 ((uint32_t)0x00000070)
+ #define RCC_PREDIV2_Div9 ((uint32_t)0x00000080)
+ #define RCC_PREDIV2_Div10 ((uint32_t)0x00000090)
+ #define RCC_PREDIV2_Div11 ((uint32_t)0x000000A0)
+ #define RCC_PREDIV2_Div12 ((uint32_t)0x000000B0)
+ #define RCC_PREDIV2_Div13 ((uint32_t)0x000000C0)
+ #define RCC_PREDIV2_Div14 ((uint32_t)0x000000D0)
+ #define RCC_PREDIV2_Div15 ((uint32_t)0x000000E0)
+ #define RCC_PREDIV2_Div16 ((uint32_t)0x000000F0)
+
+ #define IS_RCC_PREDIV2(PREDIV2) (((PREDIV2) == RCC_PREDIV2_Div1) || ((PREDIV2) == RCC_PREDIV2_Div2) || \
+ ((PREDIV2) == RCC_PREDIV2_Div3) || ((PREDIV2) == RCC_PREDIV2_Div4) || \
+ ((PREDIV2) == RCC_PREDIV2_Div5) || ((PREDIV2) == RCC_PREDIV2_Div6) || \
+ ((PREDIV2) == RCC_PREDIV2_Div7) || ((PREDIV2) == RCC_PREDIV2_Div8) || \
+ ((PREDIV2) == RCC_PREDIV2_Div9) || ((PREDIV2) == RCC_PREDIV2_Div10) || \
+ ((PREDIV2) == RCC_PREDIV2_Div11) || ((PREDIV2) == RCC_PREDIV2_Div12) || \
+ ((PREDIV2) == RCC_PREDIV2_Div13) || ((PREDIV2) == RCC_PREDIV2_Div14) || \
+ ((PREDIV2) == RCC_PREDIV2_Div15) || ((PREDIV2) == RCC_PREDIV2_Div16))
+/**
+ * @}
+ */
+
+
+/** @defgroup PLL2_multiplication_factor
+ * @{
+ */
+
+ #define RCC_PLL2Mul_8 ((uint32_t)0x00000600)
+ #define RCC_PLL2Mul_9 ((uint32_t)0x00000700)
+ #define RCC_PLL2Mul_10 ((uint32_t)0x00000800)
+ #define RCC_PLL2Mul_11 ((uint32_t)0x00000900)
+ #define RCC_PLL2Mul_12 ((uint32_t)0x00000A00)
+ #define RCC_PLL2Mul_13 ((uint32_t)0x00000B00)
+ #define RCC_PLL2Mul_14 ((uint32_t)0x00000C00)
+ #define RCC_PLL2Mul_16 ((uint32_t)0x00000E00)
+ #define RCC_PLL2Mul_20 ((uint32_t)0x00000F00)
+
+ #define IS_RCC_PLL2_MUL(MUL) (((MUL) == RCC_PLL2Mul_8) || ((MUL) == RCC_PLL2Mul_9) || \
+ ((MUL) == RCC_PLL2Mul_10) || ((MUL) == RCC_PLL2Mul_11) || \
+ ((MUL) == RCC_PLL2Mul_12) || ((MUL) == RCC_PLL2Mul_13) || \
+ ((MUL) == RCC_PLL2Mul_14) || ((MUL) == RCC_PLL2Mul_16) || \
+ ((MUL) == RCC_PLL2Mul_20))
+/**
+ * @}
+ */
+
+
+/** @defgroup PLL3_multiplication_factor
+ * @{
+ */
+
+ #define RCC_PLL3Mul_8 ((uint32_t)0x00006000)
+ #define RCC_PLL3Mul_9 ((uint32_t)0x00007000)
+ #define RCC_PLL3Mul_10 ((uint32_t)0x00008000)
+ #define RCC_PLL3Mul_11 ((uint32_t)0x00009000)
+ #define RCC_PLL3Mul_12 ((uint32_t)0x0000A000)
+ #define RCC_PLL3Mul_13 ((uint32_t)0x0000B000)
+ #define RCC_PLL3Mul_14 ((uint32_t)0x0000C000)
+ #define RCC_PLL3Mul_16 ((uint32_t)0x0000E000)
+ #define RCC_PLL3Mul_20 ((uint32_t)0x0000F000)
+
+ #define IS_RCC_PLL3_MUL(MUL) (((MUL) == RCC_PLL3Mul_8) || ((MUL) == RCC_PLL3Mul_9) || \
+ ((MUL) == RCC_PLL3Mul_10) || ((MUL) == RCC_PLL3Mul_11) || \
+ ((MUL) == RCC_PLL3Mul_12) || ((MUL) == RCC_PLL3Mul_13) || \
+ ((MUL) == RCC_PLL3Mul_14) || ((MUL) == RCC_PLL3Mul_16) || \
+ ((MUL) == RCC_PLL3Mul_20))
+/**
+ * @}
+ */
+
+#endif /* STM32F10X_CL */
+
+
+/** @defgroup System_clock_source
+ * @{
+ */
+
+#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000)
+#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001)
+#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002)
+#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSource_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSource_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup AHB_clock_source
+ * @{
+ */
+
+#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000)
+#define RCC_SYSCLK_Div2 ((uint32_t)0x00000080)
+#define RCC_SYSCLK_Div4 ((uint32_t)0x00000090)
+#define RCC_SYSCLK_Div8 ((uint32_t)0x000000A0)
+#define RCC_SYSCLK_Div16 ((uint32_t)0x000000B0)
+#define RCC_SYSCLK_Div64 ((uint32_t)0x000000C0)
+#define RCC_SYSCLK_Div128 ((uint32_t)0x000000D0)
+#define RCC_SYSCLK_Div256 ((uint32_t)0x000000E0)
+#define RCC_SYSCLK_Div512 ((uint32_t)0x000000F0)
+#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \
+ ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \
+ ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \
+ ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \
+ ((HCLK) == RCC_SYSCLK_Div512))
+/**
+ * @}
+ */
+
+/** @defgroup APB1_APB2_clock_source
+ * @{
+ */
+
+#define RCC_HCLK_Div1 ((uint32_t)0x00000000)
+#define RCC_HCLK_Div2 ((uint32_t)0x00000400)
+#define RCC_HCLK_Div4 ((uint32_t)0x00000500)
+#define RCC_HCLK_Div8 ((uint32_t)0x00000600)
+#define RCC_HCLK_Div16 ((uint32_t)0x00000700)
+#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \
+ ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \
+ ((PCLK) == RCC_HCLK_Div16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt_source
+ * @{
+ */
+
+#define RCC_IT_LSIRDY ((uint8_t)0x01)
+#define RCC_IT_LSERDY ((uint8_t)0x02)
+#define RCC_IT_HSIRDY ((uint8_t)0x04)
+#define RCC_IT_HSERDY ((uint8_t)0x08)
+#define RCC_IT_PLLRDY ((uint8_t)0x10)
+#define RCC_IT_CSS ((uint8_t)0x80)
+
+#ifndef STM32F10X_CL
+ #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0xE0) == 0x00) && ((IT) != 0x00))
+ #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \
+ ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \
+ ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS))
+ #define IS_RCC_CLEAR_IT(IT) ((((IT) & (uint8_t)0x60) == 0x00) && ((IT) != 0x00))
+#else
+ #define RCC_IT_PLL2RDY ((uint8_t)0x20)
+ #define RCC_IT_PLL3RDY ((uint8_t)0x40)
+ #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0x80) == 0x00) && ((IT) != 0x00))
+ #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \
+ ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \
+ ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \
+ ((IT) == RCC_IT_PLL2RDY) || ((IT) == RCC_IT_PLL3RDY))
+ #define IS_RCC_CLEAR_IT(IT) ((IT) != 0x00)
+#endif /* STM32F10X_CL */
+
+
+/**
+ * @}
+ */
+
+#ifndef STM32F10X_CL
+/** @defgroup USB_Device_clock_source
+ * @{
+ */
+
+ #define RCC_USBCLKSource_PLLCLK_1Div5 ((uint8_t)0x00)
+ #define RCC_USBCLKSource_PLLCLK_Div1 ((uint8_t)0x01)
+
+ #define IS_RCC_USBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSource_PLLCLK_1Div5) || \
+ ((SOURCE) == RCC_USBCLKSource_PLLCLK_Div1))
+/**
+ * @}
+ */
+#else
+/** @defgroup USB_OTG_FS_clock_source
+ * @{
+ */
+ #define RCC_OTGFSCLKSource_PLLVCO_Div3 ((uint8_t)0x00)
+ #define RCC_OTGFSCLKSource_PLLVCO_Div2 ((uint8_t)0x01)
+
+ #define IS_RCC_OTGFSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div3) || \
+ ((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div2))
+/**
+ * @}
+ */
+#endif /* STM32F10X_CL */
+
+
+#ifdef STM32F10X_CL
+/** @defgroup I2S2_clock_source
+ * @{
+ */
+ #define RCC_I2S2CLKSource_SYSCLK ((uint8_t)0x00)
+ #define RCC_I2S2CLKSource_PLL3_VCO ((uint8_t)0x01)
+
+ #define IS_RCC_I2S2CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_SYSCLK) || \
+ ((SOURCE) == RCC_I2S2CLKSource_PLL3_VCO))
+/**
+ * @}
+ */
+
+/** @defgroup I2S3_clock_source
+ * @{
+ */
+ #define RCC_I2S3CLKSource_SYSCLK ((uint8_t)0x00)
+ #define RCC_I2S3CLKSource_PLL3_VCO ((uint8_t)0x01)
+
+ #define IS_RCC_I2S3CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S3CLKSource_SYSCLK) || \
+ ((SOURCE) == RCC_I2S3CLKSource_PLL3_VCO))
+/**
+ * @}
+ */
+#endif /* STM32F10X_CL */
+
+
+/** @defgroup ADC_clock_source
+ * @{
+ */
+
+#define RCC_PCLK2_Div2 ((uint32_t)0x00000000)
+#define RCC_PCLK2_Div4 ((uint32_t)0x00004000)
+#define RCC_PCLK2_Div6 ((uint32_t)0x00008000)
+#define RCC_PCLK2_Div8 ((uint32_t)0x0000C000)
+#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_PCLK2_Div2) || ((ADCCLK) == RCC_PCLK2_Div4) || \
+ ((ADCCLK) == RCC_PCLK2_Div6) || ((ADCCLK) == RCC_PCLK2_Div8))
+/**
+ * @}
+ */
+
+/** @defgroup LSE_configuration
+ * @{
+ */
+
+#define RCC_LSE_OFF ((uint8_t)0x00)
+#define RCC_LSE_ON ((uint8_t)0x01)
+#define RCC_LSE_Bypass ((uint8_t)0x04)
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+ ((LSE) == RCC_LSE_Bypass))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_clock_source
+ * @{
+ */
+
+#define RCC_RTCCLKSource_LSE ((uint32_t)0x00000100)
+#define RCC_RTCCLKSource_LSI ((uint32_t)0x00000200)
+#define RCC_RTCCLKSource_HSE_Div128 ((uint32_t)0x00000300)
+#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \
+ ((SOURCE) == RCC_RTCCLKSource_LSI) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div128))
+/**
+ * @}
+ */
+
+/** @defgroup AHB_peripheral
+ * @{
+ */
+
+#define RCC_AHBPeriph_DMA1 ((uint32_t)0x00000001)
+#define RCC_AHBPeriph_DMA2 ((uint32_t)0x00000002)
+#define RCC_AHBPeriph_SRAM ((uint32_t)0x00000004)
+#define RCC_AHBPeriph_FLITF ((uint32_t)0x00000010)
+#define RCC_AHBPeriph_CRC ((uint32_t)0x00000040)
+
+#ifndef STM32F10X_CL
+ #define RCC_AHBPeriph_FSMC ((uint32_t)0x00000100)
+ #define RCC_AHBPeriph_SDIO ((uint32_t)0x00000400)
+ #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFAA8) == 0x00) && ((PERIPH) != 0x00))
+#else
+ #define RCC_AHBPeriph_OTG_FS ((uint32_t)0x00001000)
+ #define RCC_AHBPeriph_ETH_MAC ((uint32_t)0x00004000)
+ #define RCC_AHBPeriph_ETH_MAC_Tx ((uint32_t)0x00008000)
+ #define RCC_AHBPeriph_ETH_MAC_Rx ((uint32_t)0x00010000)
+
+ #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFE2FA8) == 0x00) && ((PERIPH) != 0x00))
+ #define IS_RCC_AHB_PERIPH_RESET(PERIPH) ((((PERIPH) & 0xFFFFAFFF) == 0x00) && ((PERIPH) != 0x00))
+#endif /* STM32F10X_CL */
+/**
+ * @}
+ */
+
+/** @defgroup APB2_peripheral
+ * @{
+ */
+
+#define RCC_APB2Periph_AFIO ((uint32_t)0x00000001)
+#define RCC_APB2Periph_GPIOA ((uint32_t)0x00000004)
+#define RCC_APB2Periph_GPIOB ((uint32_t)0x00000008)
+#define RCC_APB2Periph_GPIOC ((uint32_t)0x00000010)
+#define RCC_APB2Periph_GPIOD ((uint32_t)0x00000020)
+#define RCC_APB2Periph_GPIOE ((uint32_t)0x00000040)
+#define RCC_APB2Periph_GPIOF ((uint32_t)0x00000080)
+#define RCC_APB2Periph_GPIOG ((uint32_t)0x00000100)
+#define RCC_APB2Periph_ADC1 ((uint32_t)0x00000200)
+#define RCC_APB2Periph_ADC2 ((uint32_t)0x00000400)
+#define RCC_APB2Periph_TIM1 ((uint32_t)0x00000800)
+#define RCC_APB2Periph_SPI1 ((uint32_t)0x00001000)
+#define RCC_APB2Periph_TIM8 ((uint32_t)0x00002000)
+#define RCC_APB2Periph_USART1 ((uint32_t)0x00004000)
+#define RCC_APB2Periph_ADC3 ((uint32_t)0x00008000)
+#define RCC_APB2Periph_TIM15 ((uint32_t)0x00010000)
+#define RCC_APB2Periph_TIM16 ((uint32_t)0x00020000)
+#define RCC_APB2Periph_TIM17 ((uint32_t)0x00040000)
+#define RCC_APB2Periph_TIM9 ((uint32_t)0x00080000)
+#define RCC_APB2Periph_TIM10 ((uint32_t)0x00100000)
+#define RCC_APB2Periph_TIM11 ((uint32_t)0x00200000)
+
+#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFC00002) == 0x00) && ((PERIPH) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup APB1_peripheral
+ * @{
+ */
+
+#define RCC_APB1Periph_TIM2 ((uint32_t)0x00000001)
+#define RCC_APB1Periph_TIM3 ((uint32_t)0x00000002)
+#define RCC_APB1Periph_TIM4 ((uint32_t)0x00000004)
+#define RCC_APB1Periph_TIM5 ((uint32_t)0x00000008)
+#define RCC_APB1Periph_TIM6 ((uint32_t)0x00000010)
+#define RCC_APB1Periph_TIM7 ((uint32_t)0x00000020)
+#define RCC_APB1Periph_TIM12 ((uint32_t)0x00000040)
+#define RCC_APB1Periph_TIM13 ((uint32_t)0x00000080)
+#define RCC_APB1Periph_TIM14 ((uint32_t)0x00000100)
+#define RCC_APB1Periph_WWDG ((uint32_t)0x00000800)
+#define RCC_APB1Periph_SPI2 ((uint32_t)0x00004000)
+#define RCC_APB1Periph_SPI3 ((uint32_t)0x00008000)
+#define RCC_APB1Periph_USART2 ((uint32_t)0x00020000)
+#define RCC_APB1Periph_USART3 ((uint32_t)0x00040000)
+#define RCC_APB1Periph_UART4 ((uint32_t)0x00080000)
+#define RCC_APB1Periph_UART5 ((uint32_t)0x00100000)
+#define RCC_APB1Periph_I2C1 ((uint32_t)0x00200000)
+#define RCC_APB1Periph_I2C2 ((uint32_t)0x00400000)
+#define RCC_APB1Periph_USB ((uint32_t)0x00800000)
+#define RCC_APB1Periph_CAN1 ((uint32_t)0x02000000)
+#define RCC_APB1Periph_CAN2 ((uint32_t)0x04000000)
+#define RCC_APB1Periph_BKP ((uint32_t)0x08000000)
+#define RCC_APB1Periph_PWR ((uint32_t)0x10000000)
+#define RCC_APB1Periph_DAC ((uint32_t)0x20000000)
+#define RCC_APB1Periph_CEC ((uint32_t)0x40000000)
+
+#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x81013600) == 0x00) && ((PERIPH) != 0x00))
+
+/**
+ * @}
+ */
+
+/** @defgroup Clock_source_to_output_on_MCO_pin
+ * @{
+ */
+
+#define RCC_MCO_NoClock ((uint8_t)0x00)
+#define RCC_MCO_SYSCLK ((uint8_t)0x04)
+#define RCC_MCO_HSI ((uint8_t)0x05)
+#define RCC_MCO_HSE ((uint8_t)0x06)
+#define RCC_MCO_PLLCLK_Div2 ((uint8_t)0x07)
+
+#ifndef STM32F10X_CL
+ #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \
+ ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \
+ ((MCO) == RCC_MCO_PLLCLK_Div2))
+#else
+ #define RCC_MCO_PLL2CLK ((uint8_t)0x08)
+ #define RCC_MCO_PLL3CLK_Div2 ((uint8_t)0x09)
+ #define RCC_MCO_XT1 ((uint8_t)0x0A)
+ #define RCC_MCO_PLL3CLK ((uint8_t)0x0B)
+
+ #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \
+ ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \
+ ((MCO) == RCC_MCO_PLLCLK_Div2) || ((MCO) == RCC_MCO_PLL2CLK) || \
+ ((MCO) == RCC_MCO_PLL3CLK_Div2) || ((MCO) == RCC_MCO_XT1) || \
+ ((MCO) == RCC_MCO_PLL3CLK))
+#endif /* STM32F10X_CL */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag
+ * @{
+ */
+
+#define RCC_FLAG_HSIRDY ((uint8_t)0x21)
+#define RCC_FLAG_HSERDY ((uint8_t)0x31)
+#define RCC_FLAG_PLLRDY ((uint8_t)0x39)
+#define RCC_FLAG_LSERDY ((uint8_t)0x41)
+#define RCC_FLAG_LSIRDY ((uint8_t)0x61)
+#define RCC_FLAG_PINRST ((uint8_t)0x7A)
+#define RCC_FLAG_PORRST ((uint8_t)0x7B)
+#define RCC_FLAG_SFTRST ((uint8_t)0x7C)
+#define RCC_FLAG_IWDGRST ((uint8_t)0x7D)
+#define RCC_FLAG_WWDGRST ((uint8_t)0x7E)
+#define RCC_FLAG_LPWRRST ((uint8_t)0x7F)
+
+#ifndef STM32F10X_CL
+ #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \
+ ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \
+ ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \
+ ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \
+ ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \
+ ((FLAG) == RCC_FLAG_LPWRRST))
+#else
+ #define RCC_FLAG_PLL2RDY ((uint8_t)0x3B)
+ #define RCC_FLAG_PLL3RDY ((uint8_t)0x3D)
+ #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \
+ ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \
+ ((FLAG) == RCC_FLAG_PLL2RDY) || ((FLAG) == RCC_FLAG_PLL3RDY) || \
+ ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \
+ ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \
+ ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \
+ ((FLAG) == RCC_FLAG_LPWRRST))
+#endif /* STM32F10X_CL */
+
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Exported_Functions
+ * @{
+ */
+
+void RCC_DeInit(void);
+void RCC_HSEConfig(uint32_t RCC_HSE);
+ErrorStatus RCC_WaitForHSEStartUp(void);
+void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue);
+void RCC_HSICmd(FunctionalState NewState);
+void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul);
+void RCC_PLLCmd(FunctionalState NewState);
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+ void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div);
+#endif
+
+#ifdef STM32F10X_CL
+ void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div);
+ void RCC_PLL2Config(uint32_t RCC_PLL2Mul);
+ void RCC_PLL2Cmd(FunctionalState NewState);
+ void RCC_PLL3Config(uint32_t RCC_PLL3Mul);
+ void RCC_PLL3Cmd(FunctionalState NewState);
+#endif /* STM32F10X_CL */
+
+void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource);
+uint8_t RCC_GetSYSCLKSource(void);
+void RCC_HCLKConfig(uint32_t RCC_SYSCLK);
+void RCC_PCLK1Config(uint32_t RCC_HCLK);
+void RCC_PCLK2Config(uint32_t RCC_HCLK);
+void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState);
+
+#ifndef STM32F10X_CL
+ void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource);
+#else
+ void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource);
+#endif /* STM32F10X_CL */
+
+void RCC_ADCCLKConfig(uint32_t RCC_PCLK2);
+
+#ifdef STM32F10X_CL
+ void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource);
+ void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource);
+#endif /* STM32F10X_CL */
+
+void RCC_LSEConfig(uint8_t RCC_LSE);
+void RCC_LSICmd(FunctionalState NewState);
+void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource);
+void RCC_RTCCLKCmd(FunctionalState NewState);
+void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks);
+void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState);
+void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
+void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
+
+#ifdef STM32F10X_CL
+void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState);
+#endif /* STM32F10X_CL */
+
+void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
+void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
+void RCC_BackupResetCmd(FunctionalState NewState);
+void RCC_ClockSecuritySystemCmd(FunctionalState NewState);
+void RCC_MCOConfig(uint8_t RCC_MCO);
+FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG);
+void RCC_ClearFlag(void);
+ITStatus RCC_GetITStatus(uint8_t RCC_IT);
+void RCC_ClearITPendingBit(uint8_t RCC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_RCC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h
new file mode 100644
index 0000000..214a589
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h
@@ -0,0 +1,135 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_rtc.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the RTC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_RTC_H
+#define __STM32F10x_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup RTC
+ * @{
+ */
+
+/** @defgroup RTC_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RTC_interrupts_define
+ * @{
+ */
+
+#define RTC_IT_OW ((uint16_t)0x0004) /*!< Overflow interrupt */
+#define RTC_IT_ALR ((uint16_t)0x0002) /*!< Alarm interrupt */
+#define RTC_IT_SEC ((uint16_t)0x0001) /*!< Second interrupt */
+#define IS_RTC_IT(IT) ((((IT) & (uint16_t)0xFFF8) == 0x00) && ((IT) != 0x00))
+#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_OW) || ((IT) == RTC_IT_ALR) || \
+ ((IT) == RTC_IT_SEC))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_interrupts_flags
+ * @{
+ */
+
+#define RTC_FLAG_RTOFF ((uint16_t)0x0020) /*!< RTC Operation OFF flag */
+#define RTC_FLAG_RSF ((uint16_t)0x0008) /*!< Registers Synchronized flag */
+#define RTC_FLAG_OW ((uint16_t)0x0004) /*!< Overflow flag */
+#define RTC_FLAG_ALR ((uint16_t)0x0002) /*!< Alarm flag */
+#define RTC_FLAG_SEC ((uint16_t)0x0001) /*!< Second flag */
+#define IS_RTC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFF0) == 0x00) && ((FLAG) != 0x00))
+#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_RTOFF) || ((FLAG) == RTC_FLAG_RSF) || \
+ ((FLAG) == RTC_FLAG_OW) || ((FLAG) == RTC_FLAG_ALR) || \
+ ((FLAG) == RTC_FLAG_SEC))
+#define IS_RTC_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFFFF)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions
+ * @{
+ */
+
+void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState);
+void RTC_EnterConfigMode(void);
+void RTC_ExitConfigMode(void);
+uint32_t RTC_GetCounter(void);
+void RTC_SetCounter(uint32_t CounterValue);
+void RTC_SetPrescaler(uint32_t PrescalerValue);
+void RTC_SetAlarm(uint32_t AlarmValue);
+uint32_t RTC_GetDivider(void);
+void RTC_WaitForLastTask(void);
+void RTC_WaitForSynchro(void);
+FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG);
+void RTC_ClearFlag(uint16_t RTC_FLAG);
+ITStatus RTC_GetITStatus(uint16_t RTC_IT);
+void RTC_ClearITPendingBit(uint16_t RTC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_RTC_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h
new file mode 100644
index 0000000..40cfded
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h
@@ -0,0 +1,531 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_sdio.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the SDIO firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_SDIO_H
+#define __STM32F10x_SDIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup SDIO
+ * @{
+ */
+
+/** @defgroup SDIO_Exported_Types
+ * @{
+ */
+
+typedef struct
+{
+ uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SDIO_Clock_Edge */
+
+ uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is
+ enabled or disabled.
+ This parameter can be a value of @ref SDIO_Clock_Bypass */
+
+ uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or
+ disabled when the bus is idle.
+ This parameter can be a value of @ref SDIO_Clock_Power_Save */
+
+ uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width.
+ This parameter can be a value of @ref SDIO_Bus_Wide */
+
+ uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.
+ This parameter can be a value of @ref SDIO_Hardware_Flow_Control */
+
+ uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller.
+ This parameter can be a value between 0x00 and 0xFF. */
+
+} SDIO_InitTypeDef;
+
+typedef struct
+{
+ uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent
+ to a card as part of a command message. If a command
+ contains an argument, it must be loaded into this register
+ before writing the command to the command register */
+
+ uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */
+
+ uint32_t SDIO_Response; /*!< Specifies the SDIO response type.
+ This parameter can be a value of @ref SDIO_Response_Type */
+
+ uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled.
+ This parameter can be a value of @ref SDIO_Wait_Interrupt_State */
+
+ uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_CPSM_State */
+} SDIO_CmdInitTypeDef;
+
+typedef struct
+{
+ uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */
+
+ uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */
+
+ uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer.
+ This parameter can be a value of @ref SDIO_Data_Block_Size */
+
+ uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer
+ is a read or write.
+ This parameter can be a value of @ref SDIO_Transfer_Direction */
+
+ uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode.
+ This parameter can be a value of @ref SDIO_Transfer_Type */
+
+ uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_DPSM_State */
+} SDIO_DataInitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Exported_Constants
+ * @{
+ */
+
+/** @defgroup SDIO_Clock_Edge
+ * @{
+ */
+
+#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000)
+#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000)
+#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \
+ ((EDGE) == SDIO_ClockEdge_Falling))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Bypass
+ * @{
+ */
+
+#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000)
+#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400)
+#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \
+ ((BYPASS) == SDIO_ClockBypass_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Power_Save
+ * @{
+ */
+
+#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000)
+#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200)
+#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \
+ ((SAVE) == SDIO_ClockPowerSave_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Bus_Wide
+ * @{
+ */
+
+#define SDIO_BusWide_1b ((uint32_t)0x00000000)
+#define SDIO_BusWide_4b ((uint32_t)0x00000800)
+#define SDIO_BusWide_8b ((uint32_t)0x00001000)
+#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \
+ ((WIDE) == SDIO_BusWide_8b))
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Hardware_Flow_Control
+ * @{
+ */
+
+#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000)
+#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000)
+#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \
+ ((CONTROL) == SDIO_HardwareFlowControl_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Power_State
+ * @{
+ */
+
+#define SDIO_PowerState_OFF ((uint32_t)0x00000000)
+#define SDIO_PowerState_ON ((uint32_t)0x00000003)
+#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON))
+/**
+ * @}
+ */
+
+
+/** @defgroup SDIO_Interrupt_sources
+ * @{
+ */
+
+#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001)
+#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002)
+#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004)
+#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008)
+#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010)
+#define SDIO_IT_RXOVERR ((uint32_t)0x00000020)
+#define SDIO_IT_CMDREND ((uint32_t)0x00000040)
+#define SDIO_IT_CMDSENT ((uint32_t)0x00000080)
+#define SDIO_IT_DATAEND ((uint32_t)0x00000100)
+#define SDIO_IT_STBITERR ((uint32_t)0x00000200)
+#define SDIO_IT_DBCKEND ((uint32_t)0x00000400)
+#define SDIO_IT_CMDACT ((uint32_t)0x00000800)
+#define SDIO_IT_TXACT ((uint32_t)0x00001000)
+#define SDIO_IT_RXACT ((uint32_t)0x00002000)
+#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000)
+#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000)
+#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000)
+#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000)
+#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000)
+#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000)
+#define SDIO_IT_TXDAVL ((uint32_t)0x00100000)
+#define SDIO_IT_RXDAVL ((uint32_t)0x00200000)
+#define SDIO_IT_SDIOIT ((uint32_t)0x00400000)
+#define SDIO_IT_CEATAEND ((uint32_t)0x00800000)
+#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Command_Index
+ * @{
+ */
+
+#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Type
+ * @{
+ */
+
+#define SDIO_Response_No ((uint32_t)0x00000000)
+#define SDIO_Response_Short ((uint32_t)0x00000040)
+#define SDIO_Response_Long ((uint32_t)0x000000C0)
+#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \
+ ((RESPONSE) == SDIO_Response_Short) || \
+ ((RESPONSE) == SDIO_Response_Long))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Wait_Interrupt_State
+ * @{
+ */
+
+#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */
+#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */
+#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */
+#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \
+ ((WAIT) == SDIO_Wait_Pend))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_CPSM_State
+ * @{
+ */
+
+#define SDIO_CPSM_Disable ((uint32_t)0x00000000)
+#define SDIO_CPSM_Enable ((uint32_t)0x00000400)
+#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Registers
+ * @{
+ */
+
+#define SDIO_RESP1 ((uint32_t)0x00000000)
+#define SDIO_RESP2 ((uint32_t)0x00000004)
+#define SDIO_RESP3 ((uint32_t)0x00000008)
+#define SDIO_RESP4 ((uint32_t)0x0000000C)
+#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \
+ ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Length
+ * @{
+ */
+
+#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Block_Size
+ * @{
+ */
+
+#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000)
+#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010)
+#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020)
+#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030)
+#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040)
+#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050)
+#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060)
+#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070)
+#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080)
+#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090)
+#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0)
+#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0)
+#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0)
+#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0)
+#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0)
+#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \
+ ((SIZE) == SDIO_DataBlockSize_2b) || \
+ ((SIZE) == SDIO_DataBlockSize_4b) || \
+ ((SIZE) == SDIO_DataBlockSize_8b) || \
+ ((SIZE) == SDIO_DataBlockSize_16b) || \
+ ((SIZE) == SDIO_DataBlockSize_32b) || \
+ ((SIZE) == SDIO_DataBlockSize_64b) || \
+ ((SIZE) == SDIO_DataBlockSize_128b) || \
+ ((SIZE) == SDIO_DataBlockSize_256b) || \
+ ((SIZE) == SDIO_DataBlockSize_512b) || \
+ ((SIZE) == SDIO_DataBlockSize_1024b) || \
+ ((SIZE) == SDIO_DataBlockSize_2048b) || \
+ ((SIZE) == SDIO_DataBlockSize_4096b) || \
+ ((SIZE) == SDIO_DataBlockSize_8192b) || \
+ ((SIZE) == SDIO_DataBlockSize_16384b))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Direction
+ * @{
+ */
+
+#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000)
+#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002)
+#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \
+ ((DIR) == SDIO_TransferDir_ToSDIO))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Type
+ * @{
+ */
+
+#define SDIO_TransferMode_Block ((uint32_t)0x00000000)
+#define SDIO_TransferMode_Stream ((uint32_t)0x00000004)
+#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \
+ ((MODE) == SDIO_TransferMode_Block))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_DPSM_State
+ * @{
+ */
+
+#define SDIO_DPSM_Disable ((uint32_t)0x00000000)
+#define SDIO_DPSM_Enable ((uint32_t)0x00000001)
+#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Flags
+ * @{
+ */
+
+#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001)
+#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002)
+#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004)
+#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008)
+#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010)
+#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020)
+#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040)
+#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080)
+#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100)
+#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200)
+#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400)
+#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800)
+#define SDIO_FLAG_TXACT ((uint32_t)0x00001000)
+#define SDIO_FLAG_RXACT ((uint32_t)0x00002000)
+#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000)
+#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000)
+#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000)
+#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000)
+#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000)
+#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000)
+#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000)
+#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000)
+#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000)
+#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000)
+#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \
+ ((FLAG) == SDIO_FLAG_DCRCFAIL) || \
+ ((FLAG) == SDIO_FLAG_CTIMEOUT) || \
+ ((FLAG) == SDIO_FLAG_DTIMEOUT) || \
+ ((FLAG) == SDIO_FLAG_TXUNDERR) || \
+ ((FLAG) == SDIO_FLAG_RXOVERR) || \
+ ((FLAG) == SDIO_FLAG_CMDREND) || \
+ ((FLAG) == SDIO_FLAG_CMDSENT) || \
+ ((FLAG) == SDIO_FLAG_DATAEND) || \
+ ((FLAG) == SDIO_FLAG_STBITERR) || \
+ ((FLAG) == SDIO_FLAG_DBCKEND) || \
+ ((FLAG) == SDIO_FLAG_CMDACT) || \
+ ((FLAG) == SDIO_FLAG_TXACT) || \
+ ((FLAG) == SDIO_FLAG_RXACT) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOHE) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOHF) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOF) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOF) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOE) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOE) || \
+ ((FLAG) == SDIO_FLAG_TXDAVL) || \
+ ((FLAG) == SDIO_FLAG_RXDAVL) || \
+ ((FLAG) == SDIO_FLAG_SDIOIT) || \
+ ((FLAG) == SDIO_FLAG_CEATAEND))
+
+#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00))
+
+#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \
+ ((IT) == SDIO_IT_DCRCFAIL) || \
+ ((IT) == SDIO_IT_CTIMEOUT) || \
+ ((IT) == SDIO_IT_DTIMEOUT) || \
+ ((IT) == SDIO_IT_TXUNDERR) || \
+ ((IT) == SDIO_IT_RXOVERR) || \
+ ((IT) == SDIO_IT_CMDREND) || \
+ ((IT) == SDIO_IT_CMDSENT) || \
+ ((IT) == SDIO_IT_DATAEND) || \
+ ((IT) == SDIO_IT_STBITERR) || \
+ ((IT) == SDIO_IT_DBCKEND) || \
+ ((IT) == SDIO_IT_CMDACT) || \
+ ((IT) == SDIO_IT_TXACT) || \
+ ((IT) == SDIO_IT_RXACT) || \
+ ((IT) == SDIO_IT_TXFIFOHE) || \
+ ((IT) == SDIO_IT_RXFIFOHF) || \
+ ((IT) == SDIO_IT_TXFIFOF) || \
+ ((IT) == SDIO_IT_RXFIFOF) || \
+ ((IT) == SDIO_IT_TXFIFOE) || \
+ ((IT) == SDIO_IT_RXFIFOE) || \
+ ((IT) == SDIO_IT_TXDAVL) || \
+ ((IT) == SDIO_IT_RXDAVL) || \
+ ((IT) == SDIO_IT_SDIOIT) || \
+ ((IT) == SDIO_IT_CEATAEND))
+
+#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00))
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Read_Wait_Mode
+ * @{
+ */
+
+#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001)
+#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000)
+#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \
+ ((MODE) == SDIO_ReadWaitMode_DATA2))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Exported_Functions
+ * @{
+ */
+
+void SDIO_DeInit(void);
+void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct);
+void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct);
+void SDIO_ClockCmd(FunctionalState NewState);
+void SDIO_SetPowerState(uint32_t SDIO_PowerState);
+uint32_t SDIO_GetPowerState(void);
+void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState);
+void SDIO_DMACmd(FunctionalState NewState);
+void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);
+void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct);
+uint8_t SDIO_GetCommandResponse(void);
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP);
+void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+uint32_t SDIO_GetDataCounter(void);
+uint32_t SDIO_ReadData(void);
+void SDIO_WriteData(uint32_t Data);
+uint32_t SDIO_GetFIFOCount(void);
+void SDIO_StartSDIOReadWait(FunctionalState NewState);
+void SDIO_StopSDIOReadWait(FunctionalState NewState);
+void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);
+void SDIO_SetSDIOOperation(FunctionalState NewState);
+void SDIO_SendSDIOSuspendCmd(FunctionalState NewState);
+void SDIO_CommandCompletionCmd(FunctionalState NewState);
+void SDIO_CEATAITCmd(FunctionalState NewState);
+void SDIO_SendCEATACmd(FunctionalState NewState);
+FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG);
+void SDIO_ClearFlag(uint32_t SDIO_FLAG);
+ITStatus SDIO_GetITStatus(uint32_t SDIO_IT);
+void SDIO_ClearITPendingBit(uint32_t SDIO_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_SDIO_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h
new file mode 100644
index 0000000..6056c4c
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h
@@ -0,0 +1,487 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_spi.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the SPI firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_SPI_H
+#define __STM32F10x_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/** @defgroup SPI_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief SPI Init structure definition
+ */
+
+typedef struct
+{
+ uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode.
+ This parameter can be a value of @ref SPI_data_direction */
+
+ uint16_t SPI_Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_mode */
+
+ uint16_t SPI_DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_data_size */
+
+ uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler.
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set. */
+
+ uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */
+}SPI_InitTypeDef;
+
+/**
+ * @brief I2S Init structure definition
+ */
+
+typedef struct
+{
+
+ uint16_t I2S_Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_Mode */
+
+ uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_Standard */
+
+ uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_Data_Format */
+
+ uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_MCLK_Output */
+
+ uint32_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_Audio_Frequency */
+
+ uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_Clock_Polarity */
+}I2S_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Constants
+ * @{
+ */
+
+#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \
+ ((PERIPH) == SPI2) || \
+ ((PERIPH) == SPI3))
+
+#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \
+ ((PERIPH) == SPI3))
+
+/** @defgroup SPI_data_direction
+ * @{
+ */
+
+#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000)
+#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400)
+#define SPI_Direction_1Line_Rx ((uint16_t)0x8000)
+#define SPI_Direction_1Line_Tx ((uint16_t)0xC000)
+#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \
+ ((MODE) == SPI_Direction_2Lines_RxOnly) || \
+ ((MODE) == SPI_Direction_1Line_Rx) || \
+ ((MODE) == SPI_Direction_1Line_Tx))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_mode
+ * @{
+ */
+
+#define SPI_Mode_Master ((uint16_t)0x0104)
+#define SPI_Mode_Slave ((uint16_t)0x0000)
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \
+ ((MODE) == SPI_Mode_Slave))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_data_size
+ * @{
+ */
+
+#define SPI_DataSize_16b ((uint16_t)0x0800)
+#define SPI_DataSize_8b ((uint16_t)0x0000)
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \
+ ((DATASIZE) == SPI_DataSize_8b))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity
+ * @{
+ */
+
+#define SPI_CPOL_Low ((uint16_t)0x0000)
+#define SPI_CPOL_High ((uint16_t)0x0002)
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \
+ ((CPOL) == SPI_CPOL_High))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase
+ * @{
+ */
+
+#define SPI_CPHA_1Edge ((uint16_t)0x0000)
+#define SPI_CPHA_2Edge ((uint16_t)0x0001)
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \
+ ((CPHA) == SPI_CPHA_2Edge))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management
+ * @{
+ */
+
+#define SPI_NSS_Soft ((uint16_t)0x0200)
+#define SPI_NSS_Hard ((uint16_t)0x0000)
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \
+ ((NSS) == SPI_NSS_Hard))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_BaudRate_Prescaler
+ * @{
+ */
+
+#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000)
+#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008)
+#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010)
+#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018)
+#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020)
+#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028)
+#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030)
+#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038)
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_4) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_8) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_16) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_32) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_64) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_128) || \
+ ((PRESCALER) == SPI_BaudRatePrescaler_256))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission
+ * @{
+ */
+
+#define SPI_FirstBit_MSB ((uint16_t)0x0000)
+#define SPI_FirstBit_LSB ((uint16_t)0x0080)
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \
+ ((BIT) == SPI_FirstBit_LSB))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Mode
+ * @{
+ */
+
+#define I2S_Mode_SlaveTx ((uint16_t)0x0000)
+#define I2S_Mode_SlaveRx ((uint16_t)0x0100)
+#define I2S_Mode_MasterTx ((uint16_t)0x0200)
+#define I2S_Mode_MasterRx ((uint16_t)0x0300)
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \
+ ((MODE) == I2S_Mode_SlaveRx) || \
+ ((MODE) == I2S_Mode_MasterTx) || \
+ ((MODE) == I2S_Mode_MasterRx) )
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Standard
+ * @{
+ */
+
+#define I2S_Standard_Phillips ((uint16_t)0x0000)
+#define I2S_Standard_MSB ((uint16_t)0x0010)
+#define I2S_Standard_LSB ((uint16_t)0x0020)
+#define I2S_Standard_PCMShort ((uint16_t)0x0030)
+#define I2S_Standard_PCMLong ((uint16_t)0x00B0)
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \
+ ((STANDARD) == I2S_Standard_MSB) || \
+ ((STANDARD) == I2S_Standard_LSB) || \
+ ((STANDARD) == I2S_Standard_PCMShort) || \
+ ((STANDARD) == I2S_Standard_PCMLong))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_Format
+ * @{
+ */
+
+#define I2S_DataFormat_16b ((uint16_t)0x0000)
+#define I2S_DataFormat_16bextended ((uint16_t)0x0001)
+#define I2S_DataFormat_24b ((uint16_t)0x0003)
+#define I2S_DataFormat_32b ((uint16_t)0x0005)
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \
+ ((FORMAT) == I2S_DataFormat_16bextended) || \
+ ((FORMAT) == I2S_DataFormat_24b) || \
+ ((FORMAT) == I2S_DataFormat_32b))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MCLK_Output
+ * @{
+ */
+
+#define I2S_MCLKOutput_Enable ((uint16_t)0x0200)
+#define I2S_MCLKOutput_Disable ((uint16_t)0x0000)
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \
+ ((OUTPUT) == I2S_MCLKOutput_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Audio_Frequency
+ * @{
+ */
+
+#define I2S_AudioFreq_192k ((uint32_t)192000)
+#define I2S_AudioFreq_96k ((uint32_t)96000)
+#define I2S_AudioFreq_48k ((uint32_t)48000)
+#define I2S_AudioFreq_44k ((uint32_t)44100)
+#define I2S_AudioFreq_32k ((uint32_t)32000)
+#define I2S_AudioFreq_22k ((uint32_t)22050)
+#define I2S_AudioFreq_16k ((uint32_t)16000)
+#define I2S_AudioFreq_11k ((uint32_t)11025)
+#define I2S_AudioFreq_8k ((uint32_t)8000)
+#define I2S_AudioFreq_Default ((uint32_t)2)
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \
+ ((FREQ) <= I2S_AudioFreq_192k)) || \
+ ((FREQ) == I2S_AudioFreq_Default))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Polarity
+ * @{
+ */
+
+#define I2S_CPOL_Low ((uint16_t)0x0000)
+#define I2S_CPOL_High ((uint16_t)0x0008)
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \
+ ((CPOL) == I2S_CPOL_High))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_DMA_transfer_requests
+ * @{
+ */
+
+#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002)
+#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001)
+#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_NSS_internal_software_management
+ * @{
+ */
+
+#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100)
+#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF)
+#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \
+ ((INTERNAL) == SPI_NSSInternalSoft_Reset))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Transmit_Receive
+ * @{
+ */
+
+#define SPI_CRC_Tx ((uint8_t)0x00)
+#define SPI_CRC_Rx ((uint8_t)0x01)
+#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_direction_transmit_receive
+ * @{
+ */
+
+#define SPI_Direction_Rx ((uint16_t)0xBFFF)
+#define SPI_Direction_Tx ((uint16_t)0x4000)
+#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \
+ ((DIRECTION) == SPI_Direction_Tx))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_interrupts_definition
+ * @{
+ */
+
+#define SPI_I2S_IT_TXE ((uint8_t)0x71)
+#define SPI_I2S_IT_RXNE ((uint8_t)0x60)
+#define SPI_I2S_IT_ERR ((uint8_t)0x50)
+#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \
+ ((IT) == SPI_I2S_IT_RXNE) || \
+ ((IT) == SPI_I2S_IT_ERR))
+#define SPI_I2S_IT_OVR ((uint8_t)0x56)
+#define SPI_IT_MODF ((uint8_t)0x55)
+#define SPI_IT_CRCERR ((uint8_t)0x54)
+#define I2S_IT_UDR ((uint8_t)0x53)
+#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR))
+#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE) || ((IT) == SPI_I2S_IT_TXE) || \
+ ((IT) == I2S_IT_UDR) || ((IT) == SPI_IT_CRCERR) || \
+ ((IT) == SPI_IT_MODF) || ((IT) == SPI_I2S_IT_OVR))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_I2S_flags_definition
+ * @{
+ */
+
+#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001)
+#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002)
+#define I2S_FLAG_CHSIDE ((uint16_t)0x0004)
+#define I2S_FLAG_UDR ((uint16_t)0x0008)
+#define SPI_FLAG_CRCERR ((uint16_t)0x0010)
+#define SPI_FLAG_MODF ((uint16_t)0x0020)
+#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040)
+#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080)
+#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR))
+#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \
+ ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \
+ ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \
+ ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_polynomial
+ * @{
+ */
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Functions
+ * @{
+ */
+
+void SPI_I2S_DeInit(SPI_TypeDef* SPIx);
+void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct);
+void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct);
+void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct);
+void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct);
+void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState);
+void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState);
+void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState);
+void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState);
+void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data);
+uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx);
+void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft);
+void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState);
+void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize);
+void SPI_TransmitCRC(SPI_TypeDef* SPIx);
+void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState);
+uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC);
+uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx);
+void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction);
+FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG);
+void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG);
+ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
+void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_SPI_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h
new file mode 100644
index 0000000..cd7ac3e
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h
@@ -0,0 +1,1164 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_tim.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the TIM firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_TIM_H
+#define __STM32F10x_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/** @defgroup TIM_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief TIM Time Base Init structure definition
+ * @note This structure is used with all TIMx except for TIM6 and TIM7.
+ */
+
+typedef struct
+{
+ uint16_t TIM_Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between 0x0000 and 0xFFFF */
+
+ uint16_t TIM_CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint16_t TIM_Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter must be a number between 0x0000 and 0xFFFF. */
+
+ uint16_t TIM_ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_Clock_Division_CKD */
+
+ uint8_t TIM_RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between 0x00 and 0xFF.
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_TimeBaseInitTypeDef;
+
+/**
+ * @brief TIM Output Compare Init structure definition
+ */
+
+typedef struct
+{
+ uint16_t TIM_OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint16_t TIM_OutputState; /*!< Specifies the TIM Output Compare state.
+ This parameter can be a value of @ref TIM_Output_Compare_state */
+
+ uint16_t TIM_OutputNState; /*!< Specifies the TIM complementary Output Compare state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_state
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint16_t TIM_Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between 0x0000 and 0xFFFF */
+
+ uint16_t TIM_OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint16_t TIM_OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint16_t TIM_OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint16_t TIM_OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OCInitTypeDef;
+
+/**
+ * @brief TIM Input Capture Init structure definition
+ */
+
+typedef struct
+{
+
+ uint16_t TIM_Channel; /*!< Specifies the TIM channel.
+ This parameter can be a value of @ref TIM_Channel */
+
+ uint16_t TIM_ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint16_t TIM_ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint16_t TIM_ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint16_t TIM_ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between 0x0 and 0xF */
+} TIM_ICInitTypeDef;
+
+/**
+ * @brief BDTR structure definition
+ * @note This structure is used only with TIM1 and TIM8.
+ */
+
+typedef struct
+{
+
+ uint16_t TIM_OSSRState; /*!< Specifies the Off-State selection used in Run mode.
+ This parameter can be a value of @ref OSSR_Off_State_Selection_for_Run_mode_state */
+
+ uint16_t TIM_OSSIState; /*!< Specifies the Off-State used in Idle state.
+ This parameter can be a value of @ref OSSI_Off_State_Selection_for_Idle_mode_state */
+
+ uint16_t TIM_LOCKLevel; /*!< Specifies the LOCK level parameters.
+ This parameter can be a value of @ref Lock_level */
+
+ uint16_t TIM_DeadTime; /*!< Specifies the delay time between the switching-off and the
+ switching-on of the outputs.
+ This parameter can be a number between 0x00 and 0xFF */
+
+ uint16_t TIM_Break; /*!< Specifies whether the TIM Break input is enabled or not.
+ This parameter can be a value of @ref Break_Input_enable_disable */
+
+ uint16_t TIM_BreakPolarity; /*!< Specifies the TIM Break Input pin polarity.
+ This parameter can be a value of @ref Break_Polarity */
+
+ uint16_t TIM_AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not.
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BDTRInitTypeDef;
+
+/** @defgroup TIM_Exported_constants
+ * @{
+ */
+
+#define IS_TIM_ALL_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM6) || \
+ ((PERIPH) == TIM7) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM9) || \
+ ((PERIPH) == TIM10)|| \
+ ((PERIPH) == TIM11)|| \
+ ((PERIPH) == TIM12)|| \
+ ((PERIPH) == TIM13)|| \
+ ((PERIPH) == TIM14)|| \
+ ((PERIPH) == TIM15)|| \
+ ((PERIPH) == TIM16)|| \
+ ((PERIPH) == TIM17))
+
+/* LIST1: TIM 1 and 8 */
+#define IS_TIM_LIST1_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM8))
+
+/* LIST2: TIM 1, 8, 15 16 and 17 */
+#define IS_TIM_LIST2_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM15)|| \
+ ((PERIPH) == TIM16)|| \
+ ((PERIPH) == TIM17))
+
+/* LIST3: TIM 1, 2, 3, 4, 5 and 8 */
+#define IS_TIM_LIST3_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8))
+
+/* LIST4: TIM 1, 2, 3, 4, 5, 8, 15, 16 and 17 */
+#define IS_TIM_LIST4_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM15)|| \
+ ((PERIPH) == TIM16)|| \
+ ((PERIPH) == TIM17))
+
+/* LIST5: TIM 1, 2, 3, 4, 5, 8 and 15 */
+#define IS_TIM_LIST5_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM15))
+
+/* LIST6: TIM 1, 2, 3, 4, 5, 8, 9, 12 and 15 */
+#define IS_TIM_LIST6_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM9) || \
+ ((PERIPH) == TIM12)|| \
+ ((PERIPH) == TIM15))
+
+/* LIST7: TIM 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 and 15 */
+#define IS_TIM_LIST7_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM6) || \
+ ((PERIPH) == TIM7) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM9) || \
+ ((PERIPH) == TIM12)|| \
+ ((PERIPH) == TIM15))
+
+/* LIST8: TIM 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13, 14, 15, 16 and 17 */
+#define IS_TIM_LIST8_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM9) || \
+ ((PERIPH) == TIM10)|| \
+ ((PERIPH) == TIM11)|| \
+ ((PERIPH) == TIM12)|| \
+ ((PERIPH) == TIM13)|| \
+ ((PERIPH) == TIM14)|| \
+ ((PERIPH) == TIM15)|| \
+ ((PERIPH) == TIM16)|| \
+ ((PERIPH) == TIM17))
+
+/* LIST9: TIM 1, 2, 3, 4, 5, 6, 7, 8, 15, 16, and 17 */
+#define IS_TIM_LIST9_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM6) || \
+ ((PERIPH) == TIM7) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM15)|| \
+ ((PERIPH) == TIM16)|| \
+ ((PERIPH) == TIM17))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes
+ * @{
+ */
+
+#define TIM_OCMode_Timing ((uint16_t)0x0000)
+#define TIM_OCMode_Active ((uint16_t)0x0010)
+#define TIM_OCMode_Inactive ((uint16_t)0x0020)
+#define TIM_OCMode_Toggle ((uint16_t)0x0030)
+#define TIM_OCMode_PWM1 ((uint16_t)0x0060)
+#define TIM_OCMode_PWM2 ((uint16_t)0x0070)
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMode_Timing) || \
+ ((MODE) == TIM_OCMode_Active) || \
+ ((MODE) == TIM_OCMode_Inactive) || \
+ ((MODE) == TIM_OCMode_Toggle)|| \
+ ((MODE) == TIM_OCMode_PWM1) || \
+ ((MODE) == TIM_OCMode_PWM2))
+#define IS_TIM_OCM(MODE) (((MODE) == TIM_OCMode_Timing) || \
+ ((MODE) == TIM_OCMode_Active) || \
+ ((MODE) == TIM_OCMode_Inactive) || \
+ ((MODE) == TIM_OCMode_Toggle)|| \
+ ((MODE) == TIM_OCMode_PWM1) || \
+ ((MODE) == TIM_OCMode_PWM2) || \
+ ((MODE) == TIM_ForcedAction_Active) || \
+ ((MODE) == TIM_ForcedAction_InActive))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode
+ * @{
+ */
+
+#define TIM_OPMode_Single ((uint16_t)0x0008)
+#define TIM_OPMode_Repetitive ((uint16_t)0x0000)
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMode_Single) || \
+ ((MODE) == TIM_OPMode_Repetitive))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Channel
+ * @{
+ */
+
+#define TIM_Channel_1 ((uint16_t)0x0000)
+#define TIM_Channel_2 ((uint16_t)0x0004)
+#define TIM_Channel_3 ((uint16_t)0x0008)
+#define TIM_Channel_4 ((uint16_t)0x000C)
+#define IS_TIM_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \
+ ((CHANNEL) == TIM_Channel_2) || \
+ ((CHANNEL) == TIM_Channel_3) || \
+ ((CHANNEL) == TIM_Channel_4))
+#define IS_TIM_PWMI_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \
+ ((CHANNEL) == TIM_Channel_2))
+#define IS_TIM_COMPLEMENTARY_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \
+ ((CHANNEL) == TIM_Channel_2) || \
+ ((CHANNEL) == TIM_Channel_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Division_CKD
+ * @{
+ */
+
+#define TIM_CKD_DIV1 ((uint16_t)0x0000)
+#define TIM_CKD_DIV2 ((uint16_t)0x0100)
+#define TIM_CKD_DIV4 ((uint16_t)0x0200)
+#define IS_TIM_CKD_DIV(DIV) (((DIV) == TIM_CKD_DIV1) || \
+ ((DIV) == TIM_CKD_DIV2) || \
+ ((DIV) == TIM_CKD_DIV4))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode
+ * @{
+ */
+
+#define TIM_CounterMode_Up ((uint16_t)0x0000)
+#define TIM_CounterMode_Down ((uint16_t)0x0010)
+#define TIM_CounterMode_CenterAligned1 ((uint16_t)0x0020)
+#define TIM_CounterMode_CenterAligned2 ((uint16_t)0x0040)
+#define TIM_CounterMode_CenterAligned3 ((uint16_t)0x0060)
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_CounterMode_Up) || \
+ ((MODE) == TIM_CounterMode_Down) || \
+ ((MODE) == TIM_CounterMode_CenterAligned1) || \
+ ((MODE) == TIM_CounterMode_CenterAligned2) || \
+ ((MODE) == TIM_CounterMode_CenterAligned3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity
+ * @{
+ */
+
+#define TIM_OCPolarity_High ((uint16_t)0x0000)
+#define TIM_OCPolarity_Low ((uint16_t)0x0002)
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPolarity_High) || \
+ ((POLARITY) == TIM_OCPolarity_Low))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity
+ * @{
+ */
+
+#define TIM_OCNPolarity_High ((uint16_t)0x0000)
+#define TIM_OCNPolarity_Low ((uint16_t)0x0008)
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPolarity_High) || \
+ ((POLARITY) == TIM_OCNPolarity_Low))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_state
+ * @{
+ */
+
+#define TIM_OutputState_Disable ((uint16_t)0x0000)
+#define TIM_OutputState_Enable ((uint16_t)0x0001)
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OutputState_Disable) || \
+ ((STATE) == TIM_OutputState_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_state
+ * @{
+ */
+
+#define TIM_OutputNState_Disable ((uint16_t)0x0000)
+#define TIM_OutputNState_Enable ((uint16_t)0x0004)
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OutputNState_Disable) || \
+ ((STATE) == TIM_OutputNState_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Capture_Compare_state
+ * @{
+ */
+
+#define TIM_CCx_Enable ((uint16_t)0x0001)
+#define TIM_CCx_Disable ((uint16_t)0x0000)
+#define IS_TIM_CCX(CCX) (((CCX) == TIM_CCx_Enable) || \
+ ((CCX) == TIM_CCx_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Capture_Compare_N_state
+ * @{
+ */
+
+#define TIM_CCxN_Enable ((uint16_t)0x0004)
+#define TIM_CCxN_Disable ((uint16_t)0x0000)
+#define IS_TIM_CCXN(CCXN) (((CCXN) == TIM_CCxN_Enable) || \
+ ((CCXN) == TIM_CCxN_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup Break_Input_enable_disable
+ * @{
+ */
+
+#define TIM_Break_Enable ((uint16_t)0x1000)
+#define TIM_Break_Disable ((uint16_t)0x0000)
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_Break_Enable) || \
+ ((STATE) == TIM_Break_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup Break_Polarity
+ * @{
+ */
+
+#define TIM_BreakPolarity_Low ((uint16_t)0x0000)
+#define TIM_BreakPolarity_High ((uint16_t)0x2000)
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BreakPolarity_Low) || \
+ ((POLARITY) == TIM_BreakPolarity_High))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AOE_Bit_Set_Reset
+ * @{
+ */
+
+#define TIM_AutomaticOutput_Enable ((uint16_t)0x4000)
+#define TIM_AutomaticOutput_Disable ((uint16_t)0x0000)
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AutomaticOutput_Enable) || \
+ ((STATE) == TIM_AutomaticOutput_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup Lock_level
+ * @{
+ */
+
+#define TIM_LOCKLevel_OFF ((uint16_t)0x0000)
+#define TIM_LOCKLevel_1 ((uint16_t)0x0100)
+#define TIM_LOCKLevel_2 ((uint16_t)0x0200)
+#define TIM_LOCKLevel_3 ((uint16_t)0x0300)
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLevel_OFF) || \
+ ((LEVEL) == TIM_LOCKLevel_1) || \
+ ((LEVEL) == TIM_LOCKLevel_2) || \
+ ((LEVEL) == TIM_LOCKLevel_3))
+/**
+ * @}
+ */
+
+/** @defgroup OSSI_Off_State_Selection_for_Idle_mode_state
+ * @{
+ */
+
+#define TIM_OSSIState_Enable ((uint16_t)0x0400)
+#define TIM_OSSIState_Disable ((uint16_t)0x0000)
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSIState_Enable) || \
+ ((STATE) == TIM_OSSIState_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup OSSR_Off_State_Selection_for_Run_mode_state
+ * @{
+ */
+
+#define TIM_OSSRState_Enable ((uint16_t)0x0800)
+#define TIM_OSSRState_Disable ((uint16_t)0x0000)
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSRState_Enable) || \
+ ((STATE) == TIM_OSSRState_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State
+ * @{
+ */
+
+#define TIM_OCIdleState_Set ((uint16_t)0x0100)
+#define TIM_OCIdleState_Reset ((uint16_t)0x0000)
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIdleState_Set) || \
+ ((STATE) == TIM_OCIdleState_Reset))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State
+ * @{
+ */
+
+#define TIM_OCNIdleState_Set ((uint16_t)0x0200)
+#define TIM_OCNIdleState_Reset ((uint16_t)0x0000)
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIdleState_Set) || \
+ ((STATE) == TIM_OCNIdleState_Reset))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity
+ * @{
+ */
+
+#define TIM_ICPolarity_Rising ((uint16_t)0x0000)
+#define TIM_ICPolarity_Falling ((uint16_t)0x0002)
+#define TIM_ICPolarity_BothEdge ((uint16_t)0x000A)
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \
+ ((POLARITY) == TIM_ICPolarity_Falling))
+#define IS_TIM_IC_POLARITY_LITE(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \
+ ((POLARITY) == TIM_ICPolarity_Falling)|| \
+ ((POLARITY) == TIM_ICPolarity_BothEdge))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection
+ * @{
+ */
+
+#define TIM_ICSelection_DirectTI ((uint16_t)0x0001) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSelection_IndirectTI ((uint16_t)0x0002) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively. */
+#define TIM_ICSelection_TRC ((uint16_t)0x0003) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC. */
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSelection_DirectTI) || \
+ ((SELECTION) == TIM_ICSelection_IndirectTI) || \
+ ((SELECTION) == TIM_ICSelection_TRC))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler
+ * @{
+ */
+
+#define TIM_ICPSC_DIV1 ((uint16_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input. */
+#define TIM_ICPSC_DIV2 ((uint16_t)0x0004) /*!< Capture performed once every 2 events. */
+#define TIM_ICPSC_DIV4 ((uint16_t)0x0008) /*!< Capture performed once every 4 events. */
+#define TIM_ICPSC_DIV8 ((uint16_t)0x000C) /*!< Capture performed once every 8 events. */
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+ ((PRESCALER) == TIM_ICPSC_DIV2) || \
+ ((PRESCALER) == TIM_ICPSC_DIV4) || \
+ ((PRESCALER) == TIM_ICPSC_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_interrupt_sources
+ * @{
+ */
+
+#define TIM_IT_Update ((uint16_t)0x0001)
+#define TIM_IT_CC1 ((uint16_t)0x0002)
+#define TIM_IT_CC2 ((uint16_t)0x0004)
+#define TIM_IT_CC3 ((uint16_t)0x0008)
+#define TIM_IT_CC4 ((uint16_t)0x0010)
+#define TIM_IT_COM ((uint16_t)0x0020)
+#define TIM_IT_Trigger ((uint16_t)0x0040)
+#define TIM_IT_Break ((uint16_t)0x0080)
+#define IS_TIM_IT(IT) ((((IT) & (uint16_t)0xFF00) == 0x0000) && ((IT) != 0x0000))
+
+#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_Update) || \
+ ((IT) == TIM_IT_CC1) || \
+ ((IT) == TIM_IT_CC2) || \
+ ((IT) == TIM_IT_CC3) || \
+ ((IT) == TIM_IT_CC4) || \
+ ((IT) == TIM_IT_COM) || \
+ ((IT) == TIM_IT_Trigger) || \
+ ((IT) == TIM_IT_Break))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address
+ * @{
+ */
+
+#define TIM_DMABase_CR1 ((uint16_t)0x0000)
+#define TIM_DMABase_CR2 ((uint16_t)0x0001)
+#define TIM_DMABase_SMCR ((uint16_t)0x0002)
+#define TIM_DMABase_DIER ((uint16_t)0x0003)
+#define TIM_DMABase_SR ((uint16_t)0x0004)
+#define TIM_DMABase_EGR ((uint16_t)0x0005)
+#define TIM_DMABase_CCMR1 ((uint16_t)0x0006)
+#define TIM_DMABase_CCMR2 ((uint16_t)0x0007)
+#define TIM_DMABase_CCER ((uint16_t)0x0008)
+#define TIM_DMABase_CNT ((uint16_t)0x0009)
+#define TIM_DMABase_PSC ((uint16_t)0x000A)
+#define TIM_DMABase_ARR ((uint16_t)0x000B)
+#define TIM_DMABase_RCR ((uint16_t)0x000C)
+#define TIM_DMABase_CCR1 ((uint16_t)0x000D)
+#define TIM_DMABase_CCR2 ((uint16_t)0x000E)
+#define TIM_DMABase_CCR3 ((uint16_t)0x000F)
+#define TIM_DMABase_CCR4 ((uint16_t)0x0010)
+#define TIM_DMABase_BDTR ((uint16_t)0x0011)
+#define TIM_DMABase_DCR ((uint16_t)0x0012)
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+ ((BASE) == TIM_DMABase_CR2) || \
+ ((BASE) == TIM_DMABase_SMCR) || \
+ ((BASE) == TIM_DMABase_DIER) || \
+ ((BASE) == TIM_DMABase_SR) || \
+ ((BASE) == TIM_DMABase_EGR) || \
+ ((BASE) == TIM_DMABase_CCMR1) || \
+ ((BASE) == TIM_DMABase_CCMR2) || \
+ ((BASE) == TIM_DMABase_CCER) || \
+ ((BASE) == TIM_DMABase_CNT) || \
+ ((BASE) == TIM_DMABase_PSC) || \
+ ((BASE) == TIM_DMABase_ARR) || \
+ ((BASE) == TIM_DMABase_RCR) || \
+ ((BASE) == TIM_DMABase_CCR1) || \
+ ((BASE) == TIM_DMABase_CCR2) || \
+ ((BASE) == TIM_DMABase_CCR3) || \
+ ((BASE) == TIM_DMABase_CCR4) || \
+ ((BASE) == TIM_DMABase_BDTR) || \
+ ((BASE) == TIM_DMABase_DCR))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length
+ * @{
+ */
+
+#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000)
+#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100)
+#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200)
+#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300)
+#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400)
+#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500)
+#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600)
+#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700)
+#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800)
+#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900)
+#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00)
+#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00)
+#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00)
+#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00)
+#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00)
+#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00)
+#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000)
+#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100)
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \
+ ((LENGTH) == TIM_DMABurstLength_2Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_3Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_4Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_5Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_6Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_7Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_8Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_9Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_10Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_11Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_12Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_13Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_14Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_15Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_16Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_17Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_18Transfers))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_sources
+ * @{
+ */
+
+#define TIM_DMA_Update ((uint16_t)0x0100)
+#define TIM_DMA_CC1 ((uint16_t)0x0200)
+#define TIM_DMA_CC2 ((uint16_t)0x0400)
+#define TIM_DMA_CC3 ((uint16_t)0x0800)
+#define TIM_DMA_CC4 ((uint16_t)0x1000)
+#define TIM_DMA_COM ((uint16_t)0x2000)
+#define TIM_DMA_Trigger ((uint16_t)0x4000)
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0x80FF) == 0x0000) && ((SOURCE) != 0x0000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_External_Trigger_Prescaler
+ * @{
+ */
+
+#define TIM_ExtTRGPSC_OFF ((uint16_t)0x0000)
+#define TIM_ExtTRGPSC_DIV2 ((uint16_t)0x1000)
+#define TIM_ExtTRGPSC_DIV4 ((uint16_t)0x2000)
+#define TIM_ExtTRGPSC_DIV8 ((uint16_t)0x3000)
+#define IS_TIM_EXT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ExtTRGPSC_OFF) || \
+ ((PRESCALER) == TIM_ExtTRGPSC_DIV2) || \
+ ((PRESCALER) == TIM_ExtTRGPSC_DIV4) || \
+ ((PRESCALER) == TIM_ExtTRGPSC_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Internal_Trigger_Selection
+ * @{
+ */
+
+#define TIM_TS_ITR0 ((uint16_t)0x0000)
+#define TIM_TS_ITR1 ((uint16_t)0x0010)
+#define TIM_TS_ITR2 ((uint16_t)0x0020)
+#define TIM_TS_ITR3 ((uint16_t)0x0030)
+#define TIM_TS_TI1F_ED ((uint16_t)0x0040)
+#define TIM_TS_TI1FP1 ((uint16_t)0x0050)
+#define TIM_TS_TI2FP2 ((uint16_t)0x0060)
+#define TIM_TS_ETRF ((uint16_t)0x0070)
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_TI1F_ED) || \
+ ((SELECTION) == TIM_TS_TI1FP1) || \
+ ((SELECTION) == TIM_TS_TI2FP2) || \
+ ((SELECTION) == TIM_TS_ETRF))
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_TIx_External_Clock_Source
+ * @{
+ */
+
+#define TIM_TIxExternalCLK1Source_TI1 ((uint16_t)0x0050)
+#define TIM_TIxExternalCLK1Source_TI2 ((uint16_t)0x0060)
+#define TIM_TIxExternalCLK1Source_TI1ED ((uint16_t)0x0040)
+#define IS_TIM_TIXCLK_SOURCE(SOURCE) (((SOURCE) == TIM_TIxExternalCLK1Source_TI1) || \
+ ((SOURCE) == TIM_TIxExternalCLK1Source_TI2) || \
+ ((SOURCE) == TIM_TIxExternalCLK1Source_TI1ED))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_External_Trigger_Polarity
+ * @{
+ */
+#define TIM_ExtTRGPolarity_Inverted ((uint16_t)0x8000)
+#define TIM_ExtTRGPolarity_NonInverted ((uint16_t)0x0000)
+#define IS_TIM_EXT_POLARITY(POLARITY) (((POLARITY) == TIM_ExtTRGPolarity_Inverted) || \
+ ((POLARITY) == TIM_ExtTRGPolarity_NonInverted))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Prescaler_Reload_Mode
+ * @{
+ */
+
+#define TIM_PSCReloadMode_Update ((uint16_t)0x0000)
+#define TIM_PSCReloadMode_Immediate ((uint16_t)0x0001)
+#define IS_TIM_PRESCALER_RELOAD(RELOAD) (((RELOAD) == TIM_PSCReloadMode_Update) || \
+ ((RELOAD) == TIM_PSCReloadMode_Immediate))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Forced_Action
+ * @{
+ */
+
+#define TIM_ForcedAction_Active ((uint16_t)0x0050)
+#define TIM_ForcedAction_InActive ((uint16_t)0x0040)
+#define IS_TIM_FORCED_ACTION(ACTION) (((ACTION) == TIM_ForcedAction_Active) || \
+ ((ACTION) == TIM_ForcedAction_InActive))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Mode
+ * @{
+ */
+
+#define TIM_EncoderMode_TI1 ((uint16_t)0x0001)
+#define TIM_EncoderMode_TI2 ((uint16_t)0x0002)
+#define TIM_EncoderMode_TI12 ((uint16_t)0x0003)
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_EncoderMode_TI1) || \
+ ((MODE) == TIM_EncoderMode_TI2) || \
+ ((MODE) == TIM_EncoderMode_TI12))
+/**
+ * @}
+ */
+
+
+/** @defgroup TIM_Event_Source
+ * @{
+ */
+
+#define TIM_EventSource_Update ((uint16_t)0x0001)
+#define TIM_EventSource_CC1 ((uint16_t)0x0002)
+#define TIM_EventSource_CC2 ((uint16_t)0x0004)
+#define TIM_EventSource_CC3 ((uint16_t)0x0008)
+#define TIM_EventSource_CC4 ((uint16_t)0x0010)
+#define TIM_EventSource_COM ((uint16_t)0x0020)
+#define TIM_EventSource_Trigger ((uint16_t)0x0040)
+#define TIM_EventSource_Break ((uint16_t)0x0080)
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0xFF00) == 0x0000) && ((SOURCE) != 0x0000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Update_Source
+ * @{
+ */
+
+#define TIM_UpdateSource_Global ((uint16_t)0x0000) /*!< Source of update is the counter overflow/underflow
+ or the setting of UG bit, or an update generation
+ through the slave mode controller. */
+#define TIM_UpdateSource_Regular ((uint16_t)0x0001) /*!< Source of update is counter overflow/underflow. */
+#define IS_TIM_UPDATE_SOURCE(SOURCE) (((SOURCE) == TIM_UpdateSource_Global) || \
+ ((SOURCE) == TIM_UpdateSource_Regular))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Preload_State
+ * @{
+ */
+
+#define TIM_OCPreload_Enable ((uint16_t)0x0008)
+#define TIM_OCPreload_Disable ((uint16_t)0x0000)
+#define IS_TIM_OCPRELOAD_STATE(STATE) (((STATE) == TIM_OCPreload_Enable) || \
+ ((STATE) == TIM_OCPreload_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Fast_State
+ * @{
+ */
+
+#define TIM_OCFast_Enable ((uint16_t)0x0004)
+#define TIM_OCFast_Disable ((uint16_t)0x0000)
+#define IS_TIM_OCFAST_STATE(STATE) (((STATE) == TIM_OCFast_Enable) || \
+ ((STATE) == TIM_OCFast_Disable))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Clear_State
+ * @{
+ */
+
+#define TIM_OCClear_Enable ((uint16_t)0x0080)
+#define TIM_OCClear_Disable ((uint16_t)0x0000)
+#define IS_TIM_OCCLEAR_STATE(STATE) (((STATE) == TIM_OCClear_Enable) || \
+ ((STATE) == TIM_OCClear_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Output_Source
+ * @{
+ */
+
+#define TIM_TRGOSource_Reset ((uint16_t)0x0000)
+#define TIM_TRGOSource_Enable ((uint16_t)0x0010)
+#define TIM_TRGOSource_Update ((uint16_t)0x0020)
+#define TIM_TRGOSource_OC1 ((uint16_t)0x0030)
+#define TIM_TRGOSource_OC1Ref ((uint16_t)0x0040)
+#define TIM_TRGOSource_OC2Ref ((uint16_t)0x0050)
+#define TIM_TRGOSource_OC3Ref ((uint16_t)0x0060)
+#define TIM_TRGOSource_OC4Ref ((uint16_t)0x0070)
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGOSource_Reset) || \
+ ((SOURCE) == TIM_TRGOSource_Enable) || \
+ ((SOURCE) == TIM_TRGOSource_Update) || \
+ ((SOURCE) == TIM_TRGOSource_OC1) || \
+ ((SOURCE) == TIM_TRGOSource_OC1Ref) || \
+ ((SOURCE) == TIM_TRGOSource_OC2Ref) || \
+ ((SOURCE) == TIM_TRGOSource_OC3Ref) || \
+ ((SOURCE) == TIM_TRGOSource_OC4Ref))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Slave_Mode
+ * @{
+ */
+
+#define TIM_SlaveMode_Reset ((uint16_t)0x0004)
+#define TIM_SlaveMode_Gated ((uint16_t)0x0005)
+#define TIM_SlaveMode_Trigger ((uint16_t)0x0006)
+#define TIM_SlaveMode_External1 ((uint16_t)0x0007)
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SlaveMode_Reset) || \
+ ((MODE) == TIM_SlaveMode_Gated) || \
+ ((MODE) == TIM_SlaveMode_Trigger) || \
+ ((MODE) == TIM_SlaveMode_External1))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode
+ * @{
+ */
+
+#define TIM_MasterSlaveMode_Enable ((uint16_t)0x0080)
+#define TIM_MasterSlaveMode_Disable ((uint16_t)0x0000)
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MasterSlaveMode_Enable) || \
+ ((STATE) == TIM_MasterSlaveMode_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flags
+ * @{
+ */
+
+#define TIM_FLAG_Update ((uint16_t)0x0001)
+#define TIM_FLAG_CC1 ((uint16_t)0x0002)
+#define TIM_FLAG_CC2 ((uint16_t)0x0004)
+#define TIM_FLAG_CC3 ((uint16_t)0x0008)
+#define TIM_FLAG_CC4 ((uint16_t)0x0010)
+#define TIM_FLAG_COM ((uint16_t)0x0020)
+#define TIM_FLAG_Trigger ((uint16_t)0x0040)
+#define TIM_FLAG_Break ((uint16_t)0x0080)
+#define TIM_FLAG_CC1OF ((uint16_t)0x0200)
+#define TIM_FLAG_CC2OF ((uint16_t)0x0400)
+#define TIM_FLAG_CC3OF ((uint16_t)0x0800)
+#define TIM_FLAG_CC4OF ((uint16_t)0x1000)
+#define IS_TIM_GET_FLAG(FLAG) (((FLAG) == TIM_FLAG_Update) || \
+ ((FLAG) == TIM_FLAG_CC1) || \
+ ((FLAG) == TIM_FLAG_CC2) || \
+ ((FLAG) == TIM_FLAG_CC3) || \
+ ((FLAG) == TIM_FLAG_CC4) || \
+ ((FLAG) == TIM_FLAG_COM) || \
+ ((FLAG) == TIM_FLAG_Trigger) || \
+ ((FLAG) == TIM_FLAG_Break) || \
+ ((FLAG) == TIM_FLAG_CC1OF) || \
+ ((FLAG) == TIM_FLAG_CC2OF) || \
+ ((FLAG) == TIM_FLAG_CC3OF) || \
+ ((FLAG) == TIM_FLAG_CC4OF))
+
+
+#define IS_TIM_CLEAR_FLAG(TIM_FLAG) ((((TIM_FLAG) & (uint16_t)0xE100) == 0x0000) && ((TIM_FLAG) != 0x0000))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Filer_Value
+ * @{
+ */
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_External_Trigger_Filter
+ * @{
+ */
+
+#define IS_TIM_EXT_FILTER(EXTFILTER) ((EXTFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Legacy
+ * @{
+ */
+
+#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer
+#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers
+#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers
+#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers
+#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers
+#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers
+#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers
+#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers
+#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers
+#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers
+#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers
+#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers
+#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers
+#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers
+#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers
+#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers
+#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers
+#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions
+ * @{
+ */
+
+void TIM_DeInit(TIM_TypeDef* TIMx);
+void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct);
+void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct);
+void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct);
+void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct);
+void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct);
+void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct);
+void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct);
+void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState);
+void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource);
+void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength);
+void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState);
+void TIM_InternalClockConfig(TIM_TypeDef* TIMx);
+void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource);
+void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource,
+ uint16_t TIM_ICPolarity, uint16_t ICFilter);
+void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+ uint16_t ExtTRGFilter);
+void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler,
+ uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter);
+void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+ uint16_t ExtTRGFilter);
+void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode);
+void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode);
+void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource);
+void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode,
+ uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity);
+void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity);
+void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity);
+void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity);
+void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx);
+void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN);
+void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode);
+void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource);
+void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode);
+void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource);
+void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode);
+void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode);
+void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter);
+void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload);
+void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1);
+void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2);
+void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3);
+void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4);
+void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD);
+uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCounter(TIM_TypeDef* TIMx);
+uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx);
+FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG);
+void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG);
+ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT);
+void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_TIM_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h
new file mode 100644
index 0000000..61ae249
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h
@@ -0,0 +1,412 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_usart.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the USART
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_USART_H
+#define __STM32F10x_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup USART
+ * @{
+ */
+
+/** @defgroup USART_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief USART Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 16) + 0.5 */
+
+ uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USART_Word_Length */
+
+ uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_Stop_Bits */
+
+ uint16_t USART_Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_Mode */
+
+ uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref USART_Hardware_Flow_Control */
+} USART_InitTypeDef;
+
+/**
+ * @brief USART Clock Init Structure definition
+ */
+
+typedef struct
+{
+
+ uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled.
+ This parameter can be a value of @ref USART_Clock */
+
+ uint16_t USART_CPOL; /*!< Specifies the steady state value of the serial clock.
+ This parameter can be a value of @ref USART_Clock_Polarity */
+
+ uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_Clock_Phase */
+
+ uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_Last_Bit */
+} USART_ClockInitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Constants
+ * @{
+ */
+
+#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+ ((PERIPH) == USART2) || \
+ ((PERIPH) == USART3) || \
+ ((PERIPH) == UART4) || \
+ ((PERIPH) == UART5))
+
+#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+ ((PERIPH) == USART2) || \
+ ((PERIPH) == USART3))
+
+#define IS_USART_1234_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+ ((PERIPH) == USART2) || \
+ ((PERIPH) == USART3) || \
+ ((PERIPH) == UART4))
+/** @defgroup USART_Word_Length
+ * @{
+ */
+
+#define USART_WordLength_8b ((uint16_t)0x0000)
+#define USART_WordLength_9b ((uint16_t)0x1000)
+
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \
+ ((LENGTH) == USART_WordLength_9b))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Stop_Bits
+ * @{
+ */
+
+#define USART_StopBits_1 ((uint16_t)0x0000)
+#define USART_StopBits_0_5 ((uint16_t)0x1000)
+#define USART_StopBits_2 ((uint16_t)0x2000)
+#define USART_StopBits_1_5 ((uint16_t)0x3000)
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \
+ ((STOPBITS) == USART_StopBits_0_5) || \
+ ((STOPBITS) == USART_StopBits_2) || \
+ ((STOPBITS) == USART_StopBits_1_5))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Parity
+ * @{
+ */
+
+#define USART_Parity_No ((uint16_t)0x0000)
+#define USART_Parity_Even ((uint16_t)0x0400)
+#define USART_Parity_Odd ((uint16_t)0x0600)
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \
+ ((PARITY) == USART_Parity_Even) || \
+ ((PARITY) == USART_Parity_Odd))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Mode
+ * @{
+ */
+
+#define USART_Mode_Rx ((uint16_t)0x0004)
+#define USART_Mode_Tx ((uint16_t)0x0008)
+#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Hardware_Flow_Control
+ * @{
+ */
+#define USART_HardwareFlowControl_None ((uint16_t)0x0000)
+#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100)
+#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200)
+#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300)
+#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == USART_HardwareFlowControl_None) || \
+ ((CONTROL) == USART_HardwareFlowControl_RTS) || \
+ ((CONTROL) == USART_HardwareFlowControl_CTS) || \
+ ((CONTROL) == USART_HardwareFlowControl_RTS_CTS))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock
+ * @{
+ */
+#define USART_Clock_Disable ((uint16_t)0x0000)
+#define USART_Clock_Enable ((uint16_t)0x0800)
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \
+ ((CLOCK) == USART_Clock_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Polarity
+ * @{
+ */
+
+#define USART_CPOL_Low ((uint16_t)0x0000)
+#define USART_CPOL_High ((uint16_t)0x0400)
+#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Phase
+ * @{
+ */
+
+#define USART_CPHA_1Edge ((uint16_t)0x0000)
+#define USART_CPHA_2Edge ((uint16_t)0x0200)
+#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Last_Bit
+ * @{
+ */
+
+#define USART_LastBit_Disable ((uint16_t)0x0000)
+#define USART_LastBit_Enable ((uint16_t)0x0100)
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \
+ ((LASTBIT) == USART_LastBit_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interrupt_definition
+ * @{
+ */
+
+#define USART_IT_PE ((uint16_t)0x0028)
+#define USART_IT_TXE ((uint16_t)0x0727)
+#define USART_IT_TC ((uint16_t)0x0626)
+#define USART_IT_RXNE ((uint16_t)0x0525)
+#define USART_IT_IDLE ((uint16_t)0x0424)
+#define USART_IT_LBD ((uint16_t)0x0846)
+#define USART_IT_CTS ((uint16_t)0x096A)
+#define USART_IT_ERR ((uint16_t)0x0060)
+#define USART_IT_ORE ((uint16_t)0x0360)
+#define USART_IT_NE ((uint16_t)0x0260)
+#define USART_IT_FE ((uint16_t)0x0160)
+#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
+ ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+ ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
+ ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR))
+#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
+ ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+ ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
+ ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \
+ ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE))
+#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+ ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS))
+/**
+ * @}
+ */
+
+/** @defgroup USART_DMA_Requests
+ * @{
+ */
+
+#define USART_DMAReq_Tx ((uint16_t)0x0080)
+#define USART_DMAReq_Rx ((uint16_t)0x0040)
+#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_WakeUp_methods
+ * @{
+ */
+
+#define USART_WakeUp_IdleLine ((uint16_t)0x0000)
+#define USART_WakeUp_AddressMark ((uint16_t)0x0800)
+#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \
+ ((WAKEUP) == USART_WakeUp_AddressMark))
+/**
+ * @}
+ */
+
+/** @defgroup USART_LIN_Break_Detection_Length
+ * @{
+ */
+
+#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000)
+#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020)
+#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \
+ (((LENGTH) == USART_LINBreakDetectLength_10b) || \
+ ((LENGTH) == USART_LINBreakDetectLength_11b))
+/**
+ * @}
+ */
+
+/** @defgroup USART_IrDA_Low_Power
+ * @{
+ */
+
+#define USART_IrDAMode_LowPower ((uint16_t)0x0004)
+#define USART_IrDAMode_Normal ((uint16_t)0x0000)
+#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \
+ ((MODE) == USART_IrDAMode_Normal))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Flags
+ * @{
+ */
+
+#define USART_FLAG_CTS ((uint16_t)0x0200)
+#define USART_FLAG_LBD ((uint16_t)0x0100)
+#define USART_FLAG_TXE ((uint16_t)0x0080)
+#define USART_FLAG_TC ((uint16_t)0x0040)
+#define USART_FLAG_RXNE ((uint16_t)0x0020)
+#define USART_FLAG_IDLE ((uint16_t)0x0010)
+#define USART_FLAG_ORE ((uint16_t)0x0008)
+#define USART_FLAG_NE ((uint16_t)0x0004)
+#define USART_FLAG_FE ((uint16_t)0x0002)
+#define USART_FLAG_PE ((uint16_t)0x0001)
+#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \
+ ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \
+ ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \
+ ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \
+ ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE))
+
+#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00))
+#define IS_USART_PERIPH_FLAG(PERIPH, USART_FLAG) ((((*(uint32_t*)&(PERIPH)) != UART4_BASE) &&\
+ ((*(uint32_t*)&(PERIPH)) != UART5_BASE)) \
+ || ((USART_FLAG) != USART_FLAG_CTS))
+#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x0044AA21))
+#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
+#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Functions
+ * @{
+ */
+
+void USART_DeInit(USART_TypeDef* USARTx);
+void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct);
+void USART_StructInit(USART_InitTypeDef* USART_InitStruct);
+void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct);
+void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct);
+void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState);
+void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState);
+void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address);
+void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp);
+void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength);
+void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_SendData(USART_TypeDef* USARTx, uint16_t Data);
+uint16_t USART_ReceiveData(USART_TypeDef* USARTx);
+void USART_SendBreak(USART_TypeDef* USARTx);
+void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime);
+void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler);
+void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode);
+void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState);
+FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG);
+void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG);
+ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT);
+void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_USART_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_wwdg.h b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_wwdg.h
new file mode 100644
index 0000000..cd573da
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_wwdg.h
@@ -0,0 +1,115 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_wwdg.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file contains all the functions prototypes for the WWDG firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_WWDG_H
+#define __STM32F10x_WWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup WWDG
+ * @{
+ */
+
+/** @defgroup WWDG_Exported_Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Exported_Constants
+ * @{
+ */
+
+/** @defgroup WWDG_Prescaler
+ * @{
+ */
+
+#define WWDG_Prescaler_1 ((uint32_t)0x00000000)
+#define WWDG_Prescaler_2 ((uint32_t)0x00000080)
+#define WWDG_Prescaler_4 ((uint32_t)0x00000100)
+#define WWDG_Prescaler_8 ((uint32_t)0x00000180)
+#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \
+ ((PRESCALER) == WWDG_Prescaler_2) || \
+ ((PRESCALER) == WWDG_Prescaler_4) || \
+ ((PRESCALER) == WWDG_Prescaler_8))
+#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F)
+#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Exported_Functions
+ * @{
+ */
+
+void WWDG_DeInit(void);
+void WWDG_SetPrescaler(uint32_t WWDG_Prescaler);
+void WWDG_SetWindowValue(uint8_t WindowValue);
+void WWDG_EnableIT(void);
+void WWDG_SetCounter(uint8_t Counter);
+void WWDG_Enable(uint8_t Counter);
+FlagStatus WWDG_GetFlagStatus(void);
+void WWDG_ClearFlag(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_WWDG_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c
new file mode 100644
index 0000000..ec9165f
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c
@@ -0,0 +1,225 @@
+/**
+ ******************************************************************************
+ * @file misc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the miscellaneous firmware functions (add-on
+ * to CMSIS functions).
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "misc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup MISC
+ * @brief MISC driver modules
+ * @{
+ */
+
+/** @defgroup MISC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Private_Defines
+ * @{
+ */
+
+#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000)
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Configures the priority grouping: pre-emption priority and subpriority.
+ * @param NVIC_PriorityGroup: specifies the priority grouping bits length.
+ * This parameter can be one of the following values:
+ * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority
+ * 4 bits for subpriority
+ * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority
+ * 3 bits for subpriority
+ * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority
+ * 2 bits for subpriority
+ * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority
+ * 1 bits for subpriority
+ * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority
+ * 0 bits for subpriority
+ * @retval None
+ */
+void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup));
+
+ /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */
+ SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup;
+}
+
+/**
+ * @brief Initializes the NVIC peripheral according to the specified
+ * parameters in the NVIC_InitStruct.
+ * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
+ * the configuration information for the specified NVIC peripheral.
+ * @retval None
+ */
+void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
+{
+ uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F;
+
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));
+ assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority));
+ assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority));
+
+ if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)
+ {
+ /* Compute the Corresponding IRQ Priority --------------------------------*/
+ tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08;
+ tmppre = (0x4 - tmppriority);
+ tmpsub = tmpsub >> tmppriority;
+
+ tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre;
+ tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub;
+ tmppriority = tmppriority << 0x04;
+
+ NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority;
+
+ /* Enable the Selected IRQ Channels --------------------------------------*/
+ NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
+ (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+ }
+ else
+ {
+ /* Disable the Selected IRQ Channels -------------------------------------*/
+ NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
+ (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+ }
+}
+
+/**
+ * @brief Sets the vector table location and Offset.
+ * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory.
+ * This parameter can be one of the following values:
+ * @arg NVIC_VectTab_RAM
+ * @arg NVIC_VectTab_FLASH
+ * @param Offset: Vector Table base offset field. This value must be a multiple
+ * of 0x200.
+ * @retval None
+ */
+void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_VECTTAB(NVIC_VectTab));
+ assert_param(IS_NVIC_OFFSET(Offset));
+
+ SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80);
+}
+
+/**
+ * @brief Selects the condition for the system to enter low power mode.
+ * @param LowPowerMode: Specifies the new mode for the system to enter low power mode.
+ * This parameter can be one of the following values:
+ * @arg NVIC_LP_SEVONPEND
+ * @arg NVIC_LP_SLEEPDEEP
+ * @arg NVIC_LP_SLEEPONEXIT
+ * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_LP(LowPowerMode));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ SCB->SCR |= LowPowerMode;
+ }
+ else
+ {
+ SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
+ }
+}
+
+/**
+ * @brief Configures the SysTick clock source.
+ * @param SysTick_CLKSource: specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
+ if (SysTick_CLKSource == SysTick_CLKSource_HCLK)
+ {
+ SysTick->CTRL |= SysTick_CLKSource_HCLK;
+ }
+ else
+ {
+ SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_adc.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_adc.c
new file mode 100644
index 0000000..916a096
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_adc.c
@@ -0,0 +1,1307 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_adc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the ADC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_adc.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup ADC
+ * @brief ADC driver modules
+ * @{
+ */
+
+/** @defgroup ADC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_Defines
+ * @{
+ */
+
+/* ADC DISCNUM mask */
+#define CR1_DISCNUM_Reset ((uint32_t)0xFFFF1FFF)
+
+/* ADC DISCEN mask */
+#define CR1_DISCEN_Set ((uint32_t)0x00000800)
+#define CR1_DISCEN_Reset ((uint32_t)0xFFFFF7FF)
+
+/* ADC JAUTO mask */
+#define CR1_JAUTO_Set ((uint32_t)0x00000400)
+#define CR1_JAUTO_Reset ((uint32_t)0xFFFFFBFF)
+
+/* ADC JDISCEN mask */
+#define CR1_JDISCEN_Set ((uint32_t)0x00001000)
+#define CR1_JDISCEN_Reset ((uint32_t)0xFFFFEFFF)
+
+/* ADC AWDCH mask */
+#define CR1_AWDCH_Reset ((uint32_t)0xFFFFFFE0)
+
+/* ADC Analog watchdog enable mode mask */
+#define CR1_AWDMode_Reset ((uint32_t)0xFF3FFDFF)
+
+/* CR1 register Mask */
+#define CR1_CLEAR_Mask ((uint32_t)0xFFF0FEFF)
+
+/* ADC ADON mask */
+#define CR2_ADON_Set ((uint32_t)0x00000001)
+#define CR2_ADON_Reset ((uint32_t)0xFFFFFFFE)
+
+/* ADC DMA mask */
+#define CR2_DMA_Set ((uint32_t)0x00000100)
+#define CR2_DMA_Reset ((uint32_t)0xFFFFFEFF)
+
+/* ADC RSTCAL mask */
+#define CR2_RSTCAL_Set ((uint32_t)0x00000008)
+
+/* ADC CAL mask */
+#define CR2_CAL_Set ((uint32_t)0x00000004)
+
+/* ADC SWSTART mask */
+#define CR2_SWSTART_Set ((uint32_t)0x00400000)
+
+/* ADC EXTTRIG mask */
+#define CR2_EXTTRIG_Set ((uint32_t)0x00100000)
+#define CR2_EXTTRIG_Reset ((uint32_t)0xFFEFFFFF)
+
+/* ADC Software start mask */
+#define CR2_EXTTRIG_SWSTART_Set ((uint32_t)0x00500000)
+#define CR2_EXTTRIG_SWSTART_Reset ((uint32_t)0xFFAFFFFF)
+
+/* ADC JEXTSEL mask */
+#define CR2_JEXTSEL_Reset ((uint32_t)0xFFFF8FFF)
+
+/* ADC JEXTTRIG mask */
+#define CR2_JEXTTRIG_Set ((uint32_t)0x00008000)
+#define CR2_JEXTTRIG_Reset ((uint32_t)0xFFFF7FFF)
+
+/* ADC JSWSTART mask */
+#define CR2_JSWSTART_Set ((uint32_t)0x00200000)
+
+/* ADC injected software start mask */
+#define CR2_JEXTTRIG_JSWSTART_Set ((uint32_t)0x00208000)
+#define CR2_JEXTTRIG_JSWSTART_Reset ((uint32_t)0xFFDF7FFF)
+
+/* ADC TSPD mask */
+#define CR2_TSVREFE_Set ((uint32_t)0x00800000)
+#define CR2_TSVREFE_Reset ((uint32_t)0xFF7FFFFF)
+
+/* CR2 register Mask */
+#define CR2_CLEAR_Mask ((uint32_t)0xFFF1F7FD)
+
+/* ADC SQx mask */
+#define SQR3_SQ_Set ((uint32_t)0x0000001F)
+#define SQR2_SQ_Set ((uint32_t)0x0000001F)
+#define SQR1_SQ_Set ((uint32_t)0x0000001F)
+
+/* SQR1 register Mask */
+#define SQR1_CLEAR_Mask ((uint32_t)0xFF0FFFFF)
+
+/* ADC JSQx mask */
+#define JSQR_JSQ_Set ((uint32_t)0x0000001F)
+
+/* ADC JL mask */
+#define JSQR_JL_Set ((uint32_t)0x00300000)
+#define JSQR_JL_Reset ((uint32_t)0xFFCFFFFF)
+
+/* ADC SMPx mask */
+#define SMPR1_SMP_Set ((uint32_t)0x00000007)
+#define SMPR2_SMP_Set ((uint32_t)0x00000007)
+
+/* ADC JDRx registers offset */
+#define JDR_Offset ((uint8_t)0x28)
+
+/* ADC1 DR register base address */
+#define DR_ADDRESS ((uint32_t)0x4001244C)
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the ADCx peripheral registers to their default reset values.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval None
+ */
+void ADC_DeInit(ADC_TypeDef* ADCx)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+
+ if (ADCx == ADC1)
+ {
+ /* Enable ADC1 reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE);
+ /* Release ADC1 from reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE);
+ }
+ else if (ADCx == ADC2)
+ {
+ /* Enable ADC2 reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, ENABLE);
+ /* Release ADC2 from reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, DISABLE);
+ }
+ else
+ {
+ if (ADCx == ADC3)
+ {
+ /* Enable ADC3 reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, ENABLE);
+ /* Release ADC3 from reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Initializes the ADCx peripheral according to the specified parameters
+ * in the ADC_InitStruct.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains
+ * the configuration information for the specified ADC peripheral.
+ * @retval None
+ */
+void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct)
+{
+ uint32_t tmpreg1 = 0;
+ uint8_t tmpreg2 = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_MODE(ADC_InitStruct->ADC_Mode));
+ assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode));
+ assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode));
+ assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv));
+ assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign));
+ assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfChannel));
+
+ /*---------------------------- ADCx CR1 Configuration -----------------*/
+ /* Get the ADCx CR1 value */
+ tmpreg1 = ADCx->CR1;
+ /* Clear DUALMOD and SCAN bits */
+ tmpreg1 &= CR1_CLEAR_Mask;
+ /* Configure ADCx: Dual mode and scan conversion mode */
+ /* Set DUALMOD bits according to ADC_Mode value */
+ /* Set SCAN bit according to ADC_ScanConvMode value */
+ tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_Mode | ((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8));
+ /* Write to ADCx CR1 */
+ ADCx->CR1 = tmpreg1;
+
+ /*---------------------------- ADCx CR2 Configuration -----------------*/
+ /* Get the ADCx CR2 value */
+ tmpreg1 = ADCx->CR2;
+ /* Clear CONT, ALIGN and EXTSEL bits */
+ tmpreg1 &= CR2_CLEAR_Mask;
+ /* Configure ADCx: external trigger event and continuous conversion mode */
+ /* Set ALIGN bit according to ADC_DataAlign value */
+ /* Set EXTSEL bits according to ADC_ExternalTrigConv value */
+ /* Set CONT bit according to ADC_ContinuousConvMode value */
+ tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv |
+ ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1));
+ /* Write to ADCx CR2 */
+ ADCx->CR2 = tmpreg1;
+
+ /*---------------------------- ADCx SQR1 Configuration -----------------*/
+ /* Get the ADCx SQR1 value */
+ tmpreg1 = ADCx->SQR1;
+ /* Clear L bits */
+ tmpreg1 &= SQR1_CLEAR_Mask;
+ /* Configure ADCx: regular channel sequence length */
+ /* Set L bits according to ADC_NbrOfChannel value */
+ tmpreg2 |= (uint8_t) (ADC_InitStruct->ADC_NbrOfChannel - (uint8_t)1);
+ tmpreg1 |= (uint32_t)tmpreg2 << 20;
+ /* Write to ADCx SQR1 */
+ ADCx->SQR1 = tmpreg1;
+}
+
+/**
+ * @brief Fills each ADC_InitStruct member with its default value.
+ * @param ADC_InitStruct : pointer to an ADC_InitTypeDef structure which will be initialized.
+ * @retval None
+ */
+void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct)
+{
+ /* Reset ADC init structure parameters values */
+ /* Initialize the ADC_Mode member */
+ ADC_InitStruct->ADC_Mode = ADC_Mode_Independent;
+ /* initialize the ADC_ScanConvMode member */
+ ADC_InitStruct->ADC_ScanConvMode = DISABLE;
+ /* Initialize the ADC_ContinuousConvMode member */
+ ADC_InitStruct->ADC_ContinuousConvMode = DISABLE;
+ /* Initialize the ADC_ExternalTrigConv member */
+ ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1;
+ /* Initialize the ADC_DataAlign member */
+ ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right;
+ /* Initialize the ADC_NbrOfChannel member */
+ ADC_InitStruct->ADC_NbrOfChannel = 1;
+}
+
+/**
+ * @brief Enables or disables the specified ADC peripheral.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the ADCx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the ADON bit to wake up the ADC from power down mode */
+ ADCx->CR2 |= CR2_ADON_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC peripheral */
+ ADCx->CR2 &= CR2_ADON_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified ADC DMA request.
+ * @param ADCx: where x can be 1 or 3 to select the ADC peripheral.
+ * Note: ADC2 hasn't a DMA capability.
+ * @param NewState: new state of the selected ADC DMA transfer.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_DMA_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC DMA request */
+ ADCx->CR2 |= CR2_DMA_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC DMA request */
+ ADCx->CR2 &= CR2_DMA_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified ADC interrupts.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_IT: specifies the ADC interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg ADC_IT_EOC: End of conversion interrupt mask
+ * @arg ADC_IT_AWD: Analog watchdog interrupt mask
+ * @arg ADC_IT_JEOC: End of injected conversion interrupt mask
+ * @param NewState: new state of the specified ADC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState)
+{
+ uint8_t itmask = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_ADC_IT(ADC_IT));
+ /* Get the ADC IT index */
+ itmask = (uint8_t)ADC_IT;
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC interrupts */
+ ADCx->CR1 |= itmask;
+ }
+ else
+ {
+ /* Disable the selected ADC interrupts */
+ ADCx->CR1 &= (~(uint32_t)itmask);
+ }
+}
+
+/**
+ * @brief Resets the selected ADC calibration registers.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval None
+ */
+void ADC_ResetCalibration(ADC_TypeDef* ADCx)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Resets the selected ADC calibration registers */
+ ADCx->CR2 |= CR2_RSTCAL_Set;
+}
+
+/**
+ * @brief Gets the selected ADC reset calibration registers status.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval The new state of ADC reset calibration registers (SET or RESET).
+ */
+FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Check the status of RSTCAL bit */
+ if ((ADCx->CR2 & CR2_RSTCAL_Set) != (uint32_t)RESET)
+ {
+ /* RSTCAL bit is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* RSTCAL bit is reset */
+ bitstatus = RESET;
+ }
+ /* Return the RSTCAL bit status */
+ return bitstatus;
+}
+
+/**
+ * @brief Starts the selected ADC calibration process.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval None
+ */
+void ADC_StartCalibration(ADC_TypeDef* ADCx)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Enable the selected ADC calibration process */
+ ADCx->CR2 |= CR2_CAL_Set;
+}
+
+/**
+ * @brief Gets the selected ADC calibration status.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval The new state of ADC calibration (SET or RESET).
+ */
+FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Check the status of CAL bit */
+ if ((ADCx->CR2 & CR2_CAL_Set) != (uint32_t)RESET)
+ {
+ /* CAL bit is set: calibration on going */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAL bit is reset: end of calibration */
+ bitstatus = RESET;
+ }
+ /* Return the CAL bit status */
+ return bitstatus;
+}
+
+/**
+ * @brief Enables or disables the selected ADC software start conversion .
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC software start conversion.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC conversion on external event and start the selected
+ ADC conversion */
+ ADCx->CR2 |= CR2_EXTTRIG_SWSTART_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC conversion on external event and stop the selected
+ ADC conversion */
+ ADCx->CR2 &= CR2_EXTTRIG_SWSTART_Reset;
+ }
+}
+
+/**
+ * @brief Gets the selected ADC Software start conversion Status.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval The new state of ADC software start conversion (SET or RESET).
+ */
+FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Check the status of SWSTART bit */
+ if ((ADCx->CR2 & CR2_SWSTART_Set) != (uint32_t)RESET)
+ {
+ /* SWSTART bit is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* SWSTART bit is reset */
+ bitstatus = RESET;
+ }
+ /* Return the SWSTART bit status */
+ return bitstatus;
+}
+
+/**
+ * @brief Configures the discontinuous mode for the selected ADC regular
+ * group channel.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param Number: specifies the discontinuous mode regular channel
+ * count value. This number must be between 1 and 8.
+ * @retval None
+ */
+void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number)
+{
+ uint32_t tmpreg1 = 0;
+ uint32_t tmpreg2 = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_REGULAR_DISC_NUMBER(Number));
+ /* Get the old register value */
+ tmpreg1 = ADCx->CR1;
+ /* Clear the old discontinuous mode channel count */
+ tmpreg1 &= CR1_DISCNUM_Reset;
+ /* Set the discontinuous mode channel count */
+ tmpreg2 = Number - 1;
+ tmpreg1 |= tmpreg2 << 13;
+ /* Store the new register value */
+ ADCx->CR1 = tmpreg1;
+}
+
+/**
+ * @brief Enables or disables the discontinuous mode on regular group
+ * channel for the specified ADC
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC discontinuous mode
+ * on regular group channel.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC regular discontinuous mode */
+ ADCx->CR1 |= CR1_DISCEN_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC regular discontinuous mode */
+ ADCx->CR1 &= CR1_DISCEN_Reset;
+ }
+}
+
+/**
+ * @brief Configures for the selected ADC regular channel its corresponding
+ * rank in the sequencer and its sample time.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_Channel: the ADC channel to configure.
+ * This parameter can be one of the following values:
+ * @arg ADC_Channel_0: ADC Channel0 selected
+ * @arg ADC_Channel_1: ADC Channel1 selected
+ * @arg ADC_Channel_2: ADC Channel2 selected
+ * @arg ADC_Channel_3: ADC Channel3 selected
+ * @arg ADC_Channel_4: ADC Channel4 selected
+ * @arg ADC_Channel_5: ADC Channel5 selected
+ * @arg ADC_Channel_6: ADC Channel6 selected
+ * @arg ADC_Channel_7: ADC Channel7 selected
+ * @arg ADC_Channel_8: ADC Channel8 selected
+ * @arg ADC_Channel_9: ADC Channel9 selected
+ * @arg ADC_Channel_10: ADC Channel10 selected
+ * @arg ADC_Channel_11: ADC Channel11 selected
+ * @arg ADC_Channel_12: ADC Channel12 selected
+ * @arg ADC_Channel_13: ADC Channel13 selected
+ * @arg ADC_Channel_14: ADC Channel14 selected
+ * @arg ADC_Channel_15: ADC Channel15 selected
+ * @arg ADC_Channel_16: ADC Channel16 selected
+ * @arg ADC_Channel_17: ADC Channel17 selected
+ * @param Rank: The rank in the regular group sequencer. This parameter must be between 1 to 16.
+ * @param ADC_SampleTime: The sample time value to be set for the selected channel.
+ * This parameter can be one of the following values:
+ * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles
+ * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles
+ * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles
+ * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles
+ * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles
+ * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles
+ * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles
+ * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles
+ * @retval None
+ */
+void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
+{
+ uint32_t tmpreg1 = 0, tmpreg2 = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_CHANNEL(ADC_Channel));
+ assert_param(IS_ADC_REGULAR_RANK(Rank));
+ assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime));
+ /* if ADC_Channel_10 ... ADC_Channel_17 is selected */
+ if (ADC_Channel > ADC_Channel_9)
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SMPR1;
+ /* Calculate the mask to clear */
+ tmpreg2 = SMPR1_SMP_Set << (3 * (ADC_Channel - 10));
+ /* Clear the old channel sample time */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10));
+ /* Set the new channel sample time */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SMPR1 = tmpreg1;
+ }
+ else /* ADC_Channel include in ADC_Channel_[0..9] */
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SMPR2;
+ /* Calculate the mask to clear */
+ tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel);
+ /* Clear the old channel sample time */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel);
+ /* Set the new channel sample time */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SMPR2 = tmpreg1;
+ }
+ /* For Rank 1 to 6 */
+ if (Rank < 7)
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SQR3;
+ /* Calculate the mask to clear */
+ tmpreg2 = SQR3_SQ_Set << (5 * (Rank - 1));
+ /* Clear the old SQx bits for the selected rank */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 1));
+ /* Set the SQx bits for the selected rank */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SQR3 = tmpreg1;
+ }
+ /* For Rank 7 to 12 */
+ else if (Rank < 13)
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SQR2;
+ /* Calculate the mask to clear */
+ tmpreg2 = SQR2_SQ_Set << (5 * (Rank - 7));
+ /* Clear the old SQx bits for the selected rank */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 7));
+ /* Set the SQx bits for the selected rank */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SQR2 = tmpreg1;
+ }
+ /* For Rank 13 to 16 */
+ else
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SQR1;
+ /* Calculate the mask to clear */
+ tmpreg2 = SQR1_SQ_Set << (5 * (Rank - 13));
+ /* Clear the old SQx bits for the selected rank */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 13));
+ /* Set the SQx bits for the selected rank */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SQR1 = tmpreg1;
+ }
+}
+
+/**
+ * @brief Enables or disables the ADCx conversion through external trigger.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC external trigger start of conversion.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC conversion on external event */
+ ADCx->CR2 |= CR2_EXTTRIG_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC conversion on external event */
+ ADCx->CR2 &= CR2_EXTTRIG_Reset;
+ }
+}
+
+/**
+ * @brief Returns the last ADCx conversion result data for regular channel.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval The Data conversion value.
+ */
+uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Return the selected ADC conversion value */
+ return (uint16_t) ADCx->DR;
+}
+
+/**
+ * @brief Returns the last ADC1 and ADC2 conversion result data in dual mode.
+ * @retval The Data conversion value.
+ */
+uint32_t ADC_GetDualModeConversionValue(void)
+{
+ /* Return the dual mode conversion value */
+ return (*(__IO uint32_t *) DR_ADDRESS);
+}
+
+/**
+ * @brief Enables or disables the selected ADC automatic injected group
+ * conversion after regular one.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC auto injected conversion
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC automatic injected group conversion */
+ ADCx->CR1 |= CR1_JAUTO_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC automatic injected group conversion */
+ ADCx->CR1 &= CR1_JAUTO_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the discontinuous mode for injected group
+ * channel for the specified ADC
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC discontinuous mode
+ * on injected group channel.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC injected discontinuous mode */
+ ADCx->CR1 |= CR1_JDISCEN_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC injected discontinuous mode */
+ ADCx->CR1 &= CR1_JDISCEN_Reset;
+ }
+}
+
+/**
+ * @brief Configures the ADCx external trigger for injected channels conversion.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_ExternalTrigInjecConv: specifies the ADC trigger to start injected conversion.
+ * This parameter can be one of the following values:
+ * @arg ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected (for ADC1, ADC2 and ADC3)
+ * @arg ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected (for ADC1, ADC2 and ADC3)
+ * @arg ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected (for ADC1 and ADC2)
+ * @arg ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected (for ADC1 and ADC2)
+ * @arg ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected (for ADC1 and ADC2)
+ * @arg ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected (for ADC1 and ADC2)
+ * @arg ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: External interrupt line 15 or Timer8
+ * capture compare4 event selected (for ADC1 and ADC2)
+ * @arg ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected (for ADC3 only)
+ * @arg ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected (for ADC3 only)
+ * @arg ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected (for ADC3 only)
+ * @arg ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected (for ADC3 only)
+ * @arg ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected (for ADC3 only)
+ * @arg ADC_ExternalTrigInjecConv_None: Injected conversion started by software and not
+ * by external trigger (for ADC1, ADC2 and ADC3)
+ * @retval None
+ */
+void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv));
+ /* Get the old register value */
+ tmpreg = ADCx->CR2;
+ /* Clear the old external event selection for injected group */
+ tmpreg &= CR2_JEXTSEL_Reset;
+ /* Set the external event selection for injected group */
+ tmpreg |= ADC_ExternalTrigInjecConv;
+ /* Store the new register value */
+ ADCx->CR2 = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the ADCx injected channels conversion through
+ * external trigger
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC external trigger start of
+ * injected conversion.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC external event selection for injected group */
+ ADCx->CR2 |= CR2_JEXTTRIG_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC external event selection for injected group */
+ ADCx->CR2 &= CR2_JEXTTRIG_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the selected ADC start of the injected
+ * channels conversion.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param NewState: new state of the selected ADC software start injected conversion.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected ADC conversion for injected group on external event and start the selected
+ ADC injected conversion */
+ ADCx->CR2 |= CR2_JEXTTRIG_JSWSTART_Set;
+ }
+ else
+ {
+ /* Disable the selected ADC conversion on external event for injected group and stop the selected
+ ADC injected conversion */
+ ADCx->CR2 &= CR2_JEXTTRIG_JSWSTART_Reset;
+ }
+}
+
+/**
+ * @brief Gets the selected ADC Software start injected conversion Status.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @retval The new state of ADC software start injected conversion (SET or RESET).
+ */
+FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ /* Check the status of JSWSTART bit */
+ if ((ADCx->CR2 & CR2_JSWSTART_Set) != (uint32_t)RESET)
+ {
+ /* JSWSTART bit is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* JSWSTART bit is reset */
+ bitstatus = RESET;
+ }
+ /* Return the JSWSTART bit status */
+ return bitstatus;
+}
+
+/**
+ * @brief Configures for the selected ADC injected channel its corresponding
+ * rank in the sequencer and its sample time.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_Channel: the ADC channel to configure.
+ * This parameter can be one of the following values:
+ * @arg ADC_Channel_0: ADC Channel0 selected
+ * @arg ADC_Channel_1: ADC Channel1 selected
+ * @arg ADC_Channel_2: ADC Channel2 selected
+ * @arg ADC_Channel_3: ADC Channel3 selected
+ * @arg ADC_Channel_4: ADC Channel4 selected
+ * @arg ADC_Channel_5: ADC Channel5 selected
+ * @arg ADC_Channel_6: ADC Channel6 selected
+ * @arg ADC_Channel_7: ADC Channel7 selected
+ * @arg ADC_Channel_8: ADC Channel8 selected
+ * @arg ADC_Channel_9: ADC Channel9 selected
+ * @arg ADC_Channel_10: ADC Channel10 selected
+ * @arg ADC_Channel_11: ADC Channel11 selected
+ * @arg ADC_Channel_12: ADC Channel12 selected
+ * @arg ADC_Channel_13: ADC Channel13 selected
+ * @arg ADC_Channel_14: ADC Channel14 selected
+ * @arg ADC_Channel_15: ADC Channel15 selected
+ * @arg ADC_Channel_16: ADC Channel16 selected
+ * @arg ADC_Channel_17: ADC Channel17 selected
+ * @param Rank: The rank in the injected group sequencer. This parameter must be between 1 and 4.
+ * @param ADC_SampleTime: The sample time value to be set for the selected channel.
+ * This parameter can be one of the following values:
+ * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles
+ * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles
+ * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles
+ * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles
+ * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles
+ * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles
+ * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles
+ * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles
+ * @retval None
+ */
+void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
+{
+ uint32_t tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_CHANNEL(ADC_Channel));
+ assert_param(IS_ADC_INJECTED_RANK(Rank));
+ assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime));
+ /* if ADC_Channel_10 ... ADC_Channel_17 is selected */
+ if (ADC_Channel > ADC_Channel_9)
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SMPR1;
+ /* Calculate the mask to clear */
+ tmpreg2 = SMPR1_SMP_Set << (3*(ADC_Channel - 10));
+ /* Clear the old channel sample time */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_SampleTime << (3*(ADC_Channel - 10));
+ /* Set the new channel sample time */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SMPR1 = tmpreg1;
+ }
+ else /* ADC_Channel include in ADC_Channel_[0..9] */
+ {
+ /* Get the old register value */
+ tmpreg1 = ADCx->SMPR2;
+ /* Calculate the mask to clear */
+ tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel);
+ /* Clear the old channel sample time */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set */
+ tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel);
+ /* Set the new channel sample time */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->SMPR2 = tmpreg1;
+ }
+ /* Rank configuration */
+ /* Get the old register value */
+ tmpreg1 = ADCx->JSQR;
+ /* Get JL value: Number = JL+1 */
+ tmpreg3 = (tmpreg1 & JSQR_JL_Set)>> 20;
+ /* Calculate the mask to clear: ((Rank-1)+(4-JL-1)) */
+ tmpreg2 = JSQR_JSQ_Set << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1)));
+ /* Clear the old JSQx bits for the selected rank */
+ tmpreg1 &= ~tmpreg2;
+ /* Calculate the mask to set: ((Rank-1)+(4-JL-1)) */
+ tmpreg2 = (uint32_t)ADC_Channel << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1)));
+ /* Set the JSQx bits for the selected rank */
+ tmpreg1 |= tmpreg2;
+ /* Store the new register value */
+ ADCx->JSQR = tmpreg1;
+}
+
+/**
+ * @brief Configures the sequencer length for injected channels
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param Length: The sequencer length.
+ * This parameter must be a number between 1 to 4.
+ * @retval None
+ */
+void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length)
+{
+ uint32_t tmpreg1 = 0;
+ uint32_t tmpreg2 = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_INJECTED_LENGTH(Length));
+
+ /* Get the old register value */
+ tmpreg1 = ADCx->JSQR;
+ /* Clear the old injected sequnence lenght JL bits */
+ tmpreg1 &= JSQR_JL_Reset;
+ /* Set the injected sequnence lenght JL bits */
+ tmpreg2 = Length - 1;
+ tmpreg1 |= tmpreg2 << 20;
+ /* Store the new register value */
+ ADCx->JSQR = tmpreg1;
+}
+
+/**
+ * @brief Set the injected channels conversion value offset
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_InjectedChannel: the ADC injected channel to set its offset.
+ * This parameter can be one of the following values:
+ * @arg ADC_InjectedChannel_1: Injected Channel1 selected
+ * @arg ADC_InjectedChannel_2: Injected Channel2 selected
+ * @arg ADC_InjectedChannel_3: Injected Channel3 selected
+ * @arg ADC_InjectedChannel_4: Injected Channel4 selected
+ * @param Offset: the offset value for the selected ADC injected channel
+ * This parameter must be a 12bit value.
+ * @retval None
+ */
+void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel));
+ assert_param(IS_ADC_OFFSET(Offset));
+
+ tmp = (uint32_t)ADCx;
+ tmp += ADC_InjectedChannel;
+
+ /* Set the selected injected channel data offset */
+ *(__IO uint32_t *) tmp = (uint32_t)Offset;
+}
+
+/**
+ * @brief Returns the ADC injected channel conversion result
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_InjectedChannel: the converted ADC injected channel.
+ * This parameter can be one of the following values:
+ * @arg ADC_InjectedChannel_1: Injected Channel1 selected
+ * @arg ADC_InjectedChannel_2: Injected Channel2 selected
+ * @arg ADC_InjectedChannel_3: Injected Channel3 selected
+ * @arg ADC_InjectedChannel_4: Injected Channel4 selected
+ * @retval The Data conversion value.
+ */
+uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel));
+
+ tmp = (uint32_t)ADCx;
+ tmp += ADC_InjectedChannel + JDR_Offset;
+
+ /* Returns the selected injected channel conversion data value */
+ return (uint16_t) (*(__IO uint32_t*) tmp);
+}
+
+/**
+ * @brief Enables or disables the analog watchdog on single/all regular
+ * or injected channels
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_AnalogWatchdog: the ADC analog watchdog configuration.
+ * This parameter can be one of the following values:
+ * @arg ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel
+ * @arg ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel
+ * @arg ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel
+ * @arg ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular channel
+ * @arg ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected channel
+ * @arg ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels
+ * @arg ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog
+ * @retval None
+ */
+void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog));
+ /* Get the old register value */
+ tmpreg = ADCx->CR1;
+ /* Clear AWDEN, AWDENJ and AWDSGL bits */
+ tmpreg &= CR1_AWDMode_Reset;
+ /* Set the analog watchdog enable mode */
+ tmpreg |= ADC_AnalogWatchdog;
+ /* Store the new register value */
+ ADCx->CR1 = tmpreg;
+}
+
+/**
+ * @brief Configures the high and low thresholds of the analog watchdog.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param HighThreshold: the ADC analog watchdog High threshold value.
+ * This parameter must be a 12bit value.
+ * @param LowThreshold: the ADC analog watchdog Low threshold value.
+ * This parameter must be a 12bit value.
+ * @retval None
+ */
+void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold,
+ uint16_t LowThreshold)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_THRESHOLD(HighThreshold));
+ assert_param(IS_ADC_THRESHOLD(LowThreshold));
+ /* Set the ADCx high threshold */
+ ADCx->HTR = HighThreshold;
+ /* Set the ADCx low threshold */
+ ADCx->LTR = LowThreshold;
+}
+
+/**
+ * @brief Configures the analog watchdog guarded single channel
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_Channel: the ADC channel to configure for the analog watchdog.
+ * This parameter can be one of the following values:
+ * @arg ADC_Channel_0: ADC Channel0 selected
+ * @arg ADC_Channel_1: ADC Channel1 selected
+ * @arg ADC_Channel_2: ADC Channel2 selected
+ * @arg ADC_Channel_3: ADC Channel3 selected
+ * @arg ADC_Channel_4: ADC Channel4 selected
+ * @arg ADC_Channel_5: ADC Channel5 selected
+ * @arg ADC_Channel_6: ADC Channel6 selected
+ * @arg ADC_Channel_7: ADC Channel7 selected
+ * @arg ADC_Channel_8: ADC Channel8 selected
+ * @arg ADC_Channel_9: ADC Channel9 selected
+ * @arg ADC_Channel_10: ADC Channel10 selected
+ * @arg ADC_Channel_11: ADC Channel11 selected
+ * @arg ADC_Channel_12: ADC Channel12 selected
+ * @arg ADC_Channel_13: ADC Channel13 selected
+ * @arg ADC_Channel_14: ADC Channel14 selected
+ * @arg ADC_Channel_15: ADC Channel15 selected
+ * @arg ADC_Channel_16: ADC Channel16 selected
+ * @arg ADC_Channel_17: ADC Channel17 selected
+ * @retval None
+ */
+void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_CHANNEL(ADC_Channel));
+ /* Get the old register value */
+ tmpreg = ADCx->CR1;
+ /* Clear the Analog watchdog channel select bits */
+ tmpreg &= CR1_AWDCH_Reset;
+ /* Set the Analog watchdog channel */
+ tmpreg |= ADC_Channel;
+ /* Store the new register value */
+ ADCx->CR1 = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the temperature sensor and Vrefint channel.
+ * @param NewState: new state of the temperature sensor.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void ADC_TempSensorVrefintCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the temperature sensor and Vrefint channel*/
+ ADC1->CR2 |= CR2_TSVREFE_Set;
+ }
+ else
+ {
+ /* Disable the temperature sensor and Vrefint channel*/
+ ADC1->CR2 &= CR2_TSVREFE_Reset;
+ }
+}
+
+/**
+ * @brief Checks whether the specified ADC flag is set or not.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg ADC_FLAG_AWD: Analog watchdog flag
+ * @arg ADC_FLAG_EOC: End of conversion flag
+ * @arg ADC_FLAG_JEOC: End of injected group conversion flag
+ * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag
+ * @arg ADC_FLAG_STRT: Start of regular group conversion flag
+ * @retval The new state of ADC_FLAG (SET or RESET).
+ */
+FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_GET_FLAG(ADC_FLAG));
+ /* Check the status of the specified ADC flag */
+ if ((ADCx->SR & ADC_FLAG) != (uint8_t)RESET)
+ {
+ /* ADC_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* ADC_FLAG is reset */
+ bitstatus = RESET;
+ }
+ /* Return the ADC_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the ADCx's pending flags.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg ADC_FLAG_AWD: Analog watchdog flag
+ * @arg ADC_FLAG_EOC: End of conversion flag
+ * @arg ADC_FLAG_JEOC: End of injected group conversion flag
+ * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag
+ * @arg ADC_FLAG_STRT: Start of regular group conversion flag
+ * @retval None
+ */
+void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG));
+ /* Clear the selected ADC flags */
+ ADCx->SR = ~(uint32_t)ADC_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified ADC interrupt has occurred or not.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_IT: specifies the ADC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg ADC_IT_EOC: End of conversion interrupt mask
+ * @arg ADC_IT_AWD: Analog watchdog interrupt mask
+ * @arg ADC_IT_JEOC: End of injected conversion interrupt mask
+ * @retval The new state of ADC_IT (SET or RESET).
+ */
+ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t itmask = 0, enablestatus = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_GET_IT(ADC_IT));
+ /* Get the ADC IT index */
+ itmask = ADC_IT >> 8;
+ /* Get the ADC_IT enable bit status */
+ enablestatus = (ADCx->CR1 & (uint8_t)ADC_IT) ;
+ /* Check the status of the specified ADC interrupt */
+ if (((ADCx->SR & itmask) != (uint32_t)RESET) && enablestatus)
+ {
+ /* ADC_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* ADC_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the ADC_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the ADCx's interrupt pending bits.
+ * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+ * @param ADC_IT: specifies the ADC interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg ADC_IT_EOC: End of conversion interrupt mask
+ * @arg ADC_IT_AWD: Analog watchdog interrupt mask
+ * @arg ADC_IT_JEOC: End of injected conversion interrupt mask
+ * @retval None
+ */
+void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT)
+{
+ uint8_t itmask = 0;
+ /* Check the parameters */
+ assert_param(IS_ADC_ALL_PERIPH(ADCx));
+ assert_param(IS_ADC_IT(ADC_IT));
+ /* Get the ADC IT index */
+ itmask = (uint8_t)(ADC_IT >> 8);
+ /* Clear the selected ADC interrupt pending bits */
+ ADCx->SR = ~(uint32_t)itmask;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c
new file mode 100644
index 0000000..3004b9e
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c
@@ -0,0 +1,308 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_bkp.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the BKP firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_bkp.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup BKP
+ * @brief BKP driver modules
+ * @{
+ */
+
+/** @defgroup BKP_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Private_Defines
+ * @{
+ */
+
+/* ------------ BKP registers bit address in the alias region --------------- */
+#define BKP_OFFSET (BKP_BASE - PERIPH_BASE)
+
+/* --- CR Register ----*/
+
+/* Alias word address of TPAL bit */
+#define CR_OFFSET (BKP_OFFSET + 0x30)
+#define TPAL_BitNumber 0x01
+#define CR_TPAL_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4))
+
+/* Alias word address of TPE bit */
+#define TPE_BitNumber 0x00
+#define CR_TPE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of TPIE bit */
+#define CSR_OFFSET (BKP_OFFSET + 0x34)
+#define TPIE_BitNumber 0x02
+#define CSR_TPIE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4))
+
+/* Alias word address of TIF bit */
+#define TIF_BitNumber 0x09
+#define CSR_TIF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4))
+
+/* Alias word address of TEF bit */
+#define TEF_BitNumber 0x08
+#define CSR_TEF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4))
+
+/* ---------------------- BKP registers bit mask ------------------------ */
+
+/* RTCCR register bit mask */
+#define RTCCR_CAL_MASK ((uint16_t)0xFF80)
+#define RTCCR_MASK ((uint16_t)0xFC7F)
+
+/**
+ * @}
+ */
+
+
+/** @defgroup BKP_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup BKP_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the BKP peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void BKP_DeInit(void)
+{
+ RCC_BackupResetCmd(ENABLE);
+ RCC_BackupResetCmd(DISABLE);
+}
+
+/**
+ * @brief Configures the Tamper Pin active level.
+ * @param BKP_TamperPinLevel: specifies the Tamper Pin active level.
+ * This parameter can be one of the following values:
+ * @arg BKP_TamperPinLevel_High: Tamper pin active on high level
+ * @arg BKP_TamperPinLevel_Low: Tamper pin active on low level
+ * @retval None
+ */
+void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel)
+{
+ /* Check the parameters */
+ assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel));
+ *(__IO uint32_t *) CR_TPAL_BB = BKP_TamperPinLevel;
+}
+
+/**
+ * @brief Enables or disables the Tamper Pin activation.
+ * @param NewState: new state of the Tamper Pin activation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void BKP_TamperPinCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_TPE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the Tamper Pin Interrupt.
+ * @param NewState: new state of the Tamper Pin Interrupt.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void BKP_ITConfig(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CSR_TPIE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Select the RTC output source to output on the Tamper pin.
+ * @param BKP_RTCOutputSource: specifies the RTC output source.
+ * This parameter can be one of the following values:
+ * @arg BKP_RTCOutputSource_None: no RTC output on the Tamper pin.
+ * @arg BKP_RTCOutputSource_CalibClock: output the RTC clock with frequency
+ * divided by 64 on the Tamper pin.
+ * @arg BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse signal on
+ * the Tamper pin.
+ * @arg BKP_RTCOutputSource_Second: output the RTC Second pulse signal on
+ * the Tamper pin.
+ * @retval None
+ */
+void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource)
+{
+ uint16_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource));
+ tmpreg = BKP->RTCCR;
+ /* Clear CCO, ASOE and ASOS bits */
+ tmpreg &= RTCCR_MASK;
+
+ /* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */
+ tmpreg |= BKP_RTCOutputSource;
+ /* Store the new value */
+ BKP->RTCCR = tmpreg;
+}
+
+/**
+ * @brief Sets RTC Clock Calibration value.
+ * @param CalibrationValue: specifies the RTC Clock Calibration value.
+ * This parameter must be a number between 0 and 0x7F.
+ * @retval None
+ */
+void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue)
+{
+ uint16_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue));
+ tmpreg = BKP->RTCCR;
+ /* Clear CAL[6:0] bits */
+ tmpreg &= RTCCR_CAL_MASK;
+ /* Set CAL[6:0] bits according to CalibrationValue value */
+ tmpreg |= CalibrationValue;
+ /* Store the new value */
+ BKP->RTCCR = tmpreg;
+}
+
+/**
+ * @brief Writes user data to the specified Data Backup Register.
+ * @param BKP_DR: specifies the Data Backup Register.
+ * This parameter can be BKP_DRx where x:[1, 42]
+ * @param Data: data to write
+ * @retval None
+ */
+void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_BKP_DR(BKP_DR));
+
+ tmp = (uint32_t)BKP_BASE;
+ tmp += BKP_DR;
+
+ *(__IO uint32_t *) tmp = Data;
+}
+
+/**
+ * @brief Reads data from the specified Data Backup Register.
+ * @param BKP_DR: specifies the Data Backup Register.
+ * This parameter can be BKP_DRx where x:[1, 42]
+ * @retval The content of the specified Data Backup Register
+ */
+uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_BKP_DR(BKP_DR));
+
+ tmp = (uint32_t)BKP_BASE;
+ tmp += BKP_DR;
+
+ return (*(__IO uint16_t *) tmp);
+}
+
+/**
+ * @brief Checks whether the Tamper Pin Event flag is set or not.
+ * @param None
+ * @retval The new state of the Tamper Pin Event flag (SET or RESET).
+ */
+FlagStatus BKP_GetFlagStatus(void)
+{
+ return (FlagStatus)(*(__IO uint32_t *) CSR_TEF_BB);
+}
+
+/**
+ * @brief Clears Tamper Pin Event pending flag.
+ * @param None
+ * @retval None
+ */
+void BKP_ClearFlag(void)
+{
+ /* Set CTE bit to clear Tamper Pin Event flag */
+ BKP->CSR |= BKP_CSR_CTE;
+}
+
+/**
+ * @brief Checks whether the Tamper Pin Interrupt has occurred or not.
+ * @param None
+ * @retval The new state of the Tamper Pin Interrupt (SET or RESET).
+ */
+ITStatus BKP_GetITStatus(void)
+{
+ return (ITStatus)(*(__IO uint32_t *) CSR_TIF_BB);
+}
+
+/**
+ * @brief Clears Tamper Pin Interrupt pending bit.
+ * @param None
+ * @retval None
+ */
+void BKP_ClearITPendingBit(void)
+{
+ /* Set CTI bit to clear Tamper Pin Interrupt pending bit */
+ BKP->CSR |= BKP_CSR_CTI;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_can.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_can.c
new file mode 100644
index 0000000..607d692
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_can.c
@@ -0,0 +1,1415 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_can.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the CAN firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_can.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup CAN
+ * @brief CAN driver modules
+ * @{
+ */
+
+/** @defgroup CAN_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Private_Defines
+ * @{
+ */
+
+/* CAN Master Control Register bits */
+
+#define MCR_DBF ((uint32_t)0x00010000) /* software master reset */
+
+/* CAN Mailbox Transmit Request */
+#define TMIDxR_TXRQ ((uint32_t)0x00000001) /* Transmit mailbox request */
+
+/* CAN Filter Master Register bits */
+#define FMR_FINIT ((uint32_t)0x00000001) /* Filter init mode */
+
+/* Time out for INAK bit */
+#define INAK_TIMEOUT ((uint32_t)0x0000FFFF)
+/* Time out for SLAK bit */
+#define SLAK_TIMEOUT ((uint32_t)0x0000FFFF)
+
+
+
+/* Flags in TSR register */
+#define CAN_FLAGS_TSR ((uint32_t)0x08000000)
+/* Flags in RF1R register */
+#define CAN_FLAGS_RF1R ((uint32_t)0x04000000)
+/* Flags in RF0R register */
+#define CAN_FLAGS_RF0R ((uint32_t)0x02000000)
+/* Flags in MSR register */
+#define CAN_FLAGS_MSR ((uint32_t)0x01000000)
+/* Flags in ESR register */
+#define CAN_FLAGS_ESR ((uint32_t)0x00F00000)
+
+/* Mailboxes definition */
+#define CAN_TXMAILBOX_0 ((uint8_t)0x00)
+#define CAN_TXMAILBOX_1 ((uint8_t)0x01)
+#define CAN_TXMAILBOX_2 ((uint8_t)0x02)
+
+
+
+#define CAN_MODE_MASK ((uint32_t) 0x00000003)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Private_FunctionPrototypes
+ * @{
+ */
+
+static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit);
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the CAN peripheral registers to their default reset values.
+ * @param CANx: where x can be 1 or 2 to select the CAN peripheral.
+ * @retval None.
+ */
+void CAN_DeInit(CAN_TypeDef* CANx)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ if (CANx == CAN1)
+ {
+ /* Enable CAN1 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, ENABLE);
+ /* Release CAN1 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, DISABLE);
+ }
+ else
+ {
+ /* Enable CAN2 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, ENABLE);
+ /* Release CAN2 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, DISABLE);
+ }
+}
+
+/**
+ * @brief Initializes the CAN peripheral according to the specified
+ * parameters in the CAN_InitStruct.
+ * @param CANx: where x can be 1 or 2 to to select the CAN
+ * peripheral.
+ * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure that
+ * contains the configuration information for the
+ * CAN peripheral.
+ * @retval Constant indicates initialization succeed which will be
+ * CAN_InitStatus_Failed or CAN_InitStatus_Success.
+ */
+uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct)
+{
+ uint8_t InitStatus = CAN_InitStatus_Failed;
+ uint32_t wait_ack = 0x00000000;
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TTCM));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_ABOM));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_AWUM));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_NART));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_RFLM));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TXFP));
+ assert_param(IS_CAN_MODE(CAN_InitStruct->CAN_Mode));
+ assert_param(IS_CAN_SJW(CAN_InitStruct->CAN_SJW));
+ assert_param(IS_CAN_BS1(CAN_InitStruct->CAN_BS1));
+ assert_param(IS_CAN_BS2(CAN_InitStruct->CAN_BS2));
+ assert_param(IS_CAN_PRESCALER(CAN_InitStruct->CAN_Prescaler));
+
+ /* Exit from sleep mode */
+ CANx->MCR &= (~(uint32_t)CAN_MCR_SLEEP);
+
+ /* Request initialisation */
+ CANx->MCR |= CAN_MCR_INRQ ;
+
+ /* Wait the acknowledge */
+ while (((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT))
+ {
+ wait_ack++;
+ }
+
+ /* Check acknowledge */
+ if ((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
+ {
+ InitStatus = CAN_InitStatus_Failed;
+ }
+ else
+ {
+ /* Set the time triggered communication mode */
+ if (CAN_InitStruct->CAN_TTCM == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_TTCM;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_TTCM;
+ }
+
+ /* Set the automatic bus-off management */
+ if (CAN_InitStruct->CAN_ABOM == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_ABOM;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_ABOM;
+ }
+
+ /* Set the automatic wake-up mode */
+ if (CAN_InitStruct->CAN_AWUM == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_AWUM;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_AWUM;
+ }
+
+ /* Set the no automatic retransmission */
+ if (CAN_InitStruct->CAN_NART == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_NART;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_NART;
+ }
+
+ /* Set the receive FIFO locked mode */
+ if (CAN_InitStruct->CAN_RFLM == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_RFLM;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_RFLM;
+ }
+
+ /* Set the transmit FIFO priority */
+ if (CAN_InitStruct->CAN_TXFP == ENABLE)
+ {
+ CANx->MCR |= CAN_MCR_TXFP;
+ }
+ else
+ {
+ CANx->MCR &= ~(uint32_t)CAN_MCR_TXFP;
+ }
+
+ /* Set the bit timing register */
+ CANx->BTR = (uint32_t)((uint32_t)CAN_InitStruct->CAN_Mode << 30) | \
+ ((uint32_t)CAN_InitStruct->CAN_SJW << 24) | \
+ ((uint32_t)CAN_InitStruct->CAN_BS1 << 16) | \
+ ((uint32_t)CAN_InitStruct->CAN_BS2 << 20) | \
+ ((uint32_t)CAN_InitStruct->CAN_Prescaler - 1);
+
+ /* Request leave initialisation */
+ CANx->MCR &= ~(uint32_t)CAN_MCR_INRQ;
+
+ /* Wait the acknowledge */
+ wait_ack = 0;
+
+ while (((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT))
+ {
+ wait_ack++;
+ }
+
+ /* ...and check acknowledged */
+ if ((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
+ {
+ InitStatus = CAN_InitStatus_Failed;
+ }
+ else
+ {
+ InitStatus = CAN_InitStatus_Success ;
+ }
+ }
+
+ /* At this step, return the status of initialization */
+ return InitStatus;
+}
+
+/**
+ * @brief Initializes the CAN peripheral according to the specified
+ * parameters in the CAN_FilterInitStruct.
+ * @param CAN_FilterInitStruct: pointer to a CAN_FilterInitTypeDef
+ * structure that contains the configuration
+ * information.
+ * @retval None.
+ */
+void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct)
+{
+ uint32_t filter_number_bit_pos = 0;
+ /* Check the parameters */
+ assert_param(IS_CAN_FILTER_NUMBER(CAN_FilterInitStruct->CAN_FilterNumber));
+ assert_param(IS_CAN_FILTER_MODE(CAN_FilterInitStruct->CAN_FilterMode));
+ assert_param(IS_CAN_FILTER_SCALE(CAN_FilterInitStruct->CAN_FilterScale));
+ assert_param(IS_CAN_FILTER_FIFO(CAN_FilterInitStruct->CAN_FilterFIFOAssignment));
+ assert_param(IS_FUNCTIONAL_STATE(CAN_FilterInitStruct->CAN_FilterActivation));
+
+ filter_number_bit_pos = ((uint32_t)1) << CAN_FilterInitStruct->CAN_FilterNumber;
+
+ /* Initialisation mode for the filter */
+ CAN1->FMR |= FMR_FINIT;
+
+ /* Filter Deactivation */
+ CAN1->FA1R &= ~(uint32_t)filter_number_bit_pos;
+
+ /* Filter Scale */
+ if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_16bit)
+ {
+ /* 16-bit scale for the filter */
+ CAN1->FS1R &= ~(uint32_t)filter_number_bit_pos;
+
+ /* First 16-bit identifier and First 16-bit mask */
+ /* Or First 16-bit identifier and Second 16-bit identifier */
+ CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 =
+ ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow) << 16) |
+ (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow);
+
+ /* Second 16-bit identifier and Second 16-bit mask */
+ /* Or Third 16-bit identifier and Fourth 16-bit identifier */
+ CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 =
+ ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) |
+ (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh);
+ }
+
+ if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_32bit)
+ {
+ /* 32-bit scale for the filter */
+ CAN1->FS1R |= filter_number_bit_pos;
+ /* 32-bit identifier or First 32-bit identifier */
+ CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 =
+ ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh) << 16) |
+ (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow);
+ /* 32-bit mask or Second 32-bit identifier */
+ CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 =
+ ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) |
+ (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow);
+ }
+
+ /* Filter Mode */
+ if (CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdMask)
+ {
+ /*Id/Mask mode for the filter*/
+ CAN1->FM1R &= ~(uint32_t)filter_number_bit_pos;
+ }
+ else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */
+ {
+ /*Identifier list mode for the filter*/
+ CAN1->FM1R |= (uint32_t)filter_number_bit_pos;
+ }
+
+ /* Filter FIFO assignment */
+ if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO0)
+ {
+ /* FIFO 0 assignation for the filter */
+ CAN1->FFA1R &= ~(uint32_t)filter_number_bit_pos;
+ }
+
+ if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO1)
+ {
+ /* FIFO 1 assignation for the filter */
+ CAN1->FFA1R |= (uint32_t)filter_number_bit_pos;
+ }
+
+ /* Filter activation */
+ if (CAN_FilterInitStruct->CAN_FilterActivation == ENABLE)
+ {
+ CAN1->FA1R |= filter_number_bit_pos;
+ }
+
+ /* Leave the initialisation mode for the filter */
+ CAN1->FMR &= ~FMR_FINIT;
+}
+
+/**
+ * @brief Fills each CAN_InitStruct member with its default value.
+ * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure which
+ * will be initialized.
+ * @retval None.
+ */
+void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct)
+{
+ /* Reset CAN init structure parameters values */
+
+ /* Initialize the time triggered communication mode */
+ CAN_InitStruct->CAN_TTCM = DISABLE;
+
+ /* Initialize the automatic bus-off management */
+ CAN_InitStruct->CAN_ABOM = DISABLE;
+
+ /* Initialize the automatic wake-up mode */
+ CAN_InitStruct->CAN_AWUM = DISABLE;
+
+ /* Initialize the no automatic retransmission */
+ CAN_InitStruct->CAN_NART = DISABLE;
+
+ /* Initialize the receive FIFO locked mode */
+ CAN_InitStruct->CAN_RFLM = DISABLE;
+
+ /* Initialize the transmit FIFO priority */
+ CAN_InitStruct->CAN_TXFP = DISABLE;
+
+ /* Initialize the CAN_Mode member */
+ CAN_InitStruct->CAN_Mode = CAN_Mode_Normal;
+
+ /* Initialize the CAN_SJW member */
+ CAN_InitStruct->CAN_SJW = CAN_SJW_1tq;
+
+ /* Initialize the CAN_BS1 member */
+ CAN_InitStruct->CAN_BS1 = CAN_BS1_4tq;
+
+ /* Initialize the CAN_BS2 member */
+ CAN_InitStruct->CAN_BS2 = CAN_BS2_3tq;
+
+ /* Initialize the CAN_Prescaler member */
+ CAN_InitStruct->CAN_Prescaler = 1;
+}
+
+/**
+ * @brief Select the start bank filter for slave CAN.
+ * @note This function applies only to STM32 Connectivity line devices.
+ * @param CAN_BankNumber: Select the start slave bank filter from 1..27.
+ * @retval None.
+ */
+void CAN_SlaveStartBank(uint8_t CAN_BankNumber)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_BANKNUMBER(CAN_BankNumber));
+
+ /* Enter Initialisation mode for the filter */
+ CAN1->FMR |= FMR_FINIT;
+
+ /* Select the start slave bank */
+ CAN1->FMR &= (uint32_t)0xFFFFC0F1 ;
+ CAN1->FMR |= (uint32_t)(CAN_BankNumber)<<8;
+
+ /* Leave Initialisation mode for the filter */
+ CAN1->FMR &= ~FMR_FINIT;
+}
+
+/**
+ * @brief Enables or disables the DBG Freeze for CAN.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param NewState: new state of the CAN peripheral. This parameter can
+ * be: ENABLE or DISABLE.
+ * @retval None.
+ */
+void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable Debug Freeze */
+ CANx->MCR |= MCR_DBF;
+ }
+ else
+ {
+ /* Disable Debug Freeze */
+ CANx->MCR &= ~MCR_DBF;
+ }
+}
+
+
+/**
+ * @brief Enables or disabes the CAN Time TriggerOperation communication mode.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param NewState : Mode new state , can be one of @ref FunctionalState.
+ * @note when enabled, Time stamp (TIME[15:0]) value is sent in the last
+ * two data bytes of the 8-byte message: TIME[7:0] in data byte 6
+ * and TIME[15:8] in data byte 7
+ * @note DLC must be programmed as 8 in order Time Stamp (2 bytes) to be
+ * sent over the CAN bus.
+ * @retval None
+ */
+void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the TTCM mode */
+ CANx->MCR |= CAN_MCR_TTCM;
+
+ /* Set TGT bits */
+ CANx->sTxMailBox[0].TDTR |= ((uint32_t)CAN_TDT0R_TGT);
+ CANx->sTxMailBox[1].TDTR |= ((uint32_t)CAN_TDT1R_TGT);
+ CANx->sTxMailBox[2].TDTR |= ((uint32_t)CAN_TDT2R_TGT);
+ }
+ else
+ {
+ /* Disable the TTCM mode */
+ CANx->MCR &= (uint32_t)(~(uint32_t)CAN_MCR_TTCM);
+
+ /* Reset TGT bits */
+ CANx->sTxMailBox[0].TDTR &= ((uint32_t)~CAN_TDT0R_TGT);
+ CANx->sTxMailBox[1].TDTR &= ((uint32_t)~CAN_TDT1R_TGT);
+ CANx->sTxMailBox[2].TDTR &= ((uint32_t)~CAN_TDT2R_TGT);
+ }
+}
+/**
+ * @brief Initiates the transmission of a message.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param TxMessage: pointer to a structure which contains CAN Id, CAN
+ * DLC and CAN data.
+ * @retval The number of the mailbox that is used for transmission
+ * or CAN_TxStatus_NoMailBox if there is no empty mailbox.
+ */
+uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage)
+{
+ uint8_t transmit_mailbox = 0;
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_IDTYPE(TxMessage->IDE));
+ assert_param(IS_CAN_RTR(TxMessage->RTR));
+ assert_param(IS_CAN_DLC(TxMessage->DLC));
+
+ /* Select one empty transmit mailbox */
+ if ((CANx->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
+ {
+ transmit_mailbox = 0;
+ }
+ else if ((CANx->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
+ {
+ transmit_mailbox = 1;
+ }
+ else if ((CANx->TSR&CAN_TSR_TME2) == CAN_TSR_TME2)
+ {
+ transmit_mailbox = 2;
+ }
+ else
+ {
+ transmit_mailbox = CAN_TxStatus_NoMailBox;
+ }
+
+ if (transmit_mailbox != CAN_TxStatus_NoMailBox)
+ {
+ /* Set up the Id */
+ CANx->sTxMailBox[transmit_mailbox].TIR &= TMIDxR_TXRQ;
+ if (TxMessage->IDE == CAN_Id_Standard)
+ {
+ assert_param(IS_CAN_STDID(TxMessage->StdId));
+ CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->StdId << 21) | \
+ TxMessage->RTR);
+ }
+ else
+ {
+ assert_param(IS_CAN_EXTID(TxMessage->ExtId));
+ CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->ExtId << 3) | \
+ TxMessage->IDE | \
+ TxMessage->RTR);
+ }
+
+ /* Set up the DLC */
+ TxMessage->DLC &= (uint8_t)0x0000000F;
+ CANx->sTxMailBox[transmit_mailbox].TDTR &= (uint32_t)0xFFFFFFF0;
+ CANx->sTxMailBox[transmit_mailbox].TDTR |= TxMessage->DLC;
+
+ /* Set up the data field */
+ CANx->sTxMailBox[transmit_mailbox].TDLR = (((uint32_t)TxMessage->Data[3] << 24) |
+ ((uint32_t)TxMessage->Data[2] << 16) |
+ ((uint32_t)TxMessage->Data[1] << 8) |
+ ((uint32_t)TxMessage->Data[0]));
+ CANx->sTxMailBox[transmit_mailbox].TDHR = (((uint32_t)TxMessage->Data[7] << 24) |
+ ((uint32_t)TxMessage->Data[6] << 16) |
+ ((uint32_t)TxMessage->Data[5] << 8) |
+ ((uint32_t)TxMessage->Data[4]));
+ /* Request transmission */
+ CANx->sTxMailBox[transmit_mailbox].TIR |= TMIDxR_TXRQ;
+ }
+ return transmit_mailbox;
+}
+
+/**
+ * @brief Checks the transmission of a message.
+ * @param CANx: where x can be 1 or 2 to to select the
+ * CAN peripheral.
+ * @param TransmitMailbox: the number of the mailbox that is used for
+ * transmission.
+ * @retval CAN_TxStatus_Ok if the CAN driver transmits the message, CAN_TxStatus_Failed
+ * in an other case.
+ */
+uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox)
+{
+ uint32_t state = 0;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_TRANSMITMAILBOX(TransmitMailbox));
+
+ switch (TransmitMailbox)
+ {
+ case (CAN_TXMAILBOX_0):
+ state = CANx->TSR & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0);
+ break;
+ case (CAN_TXMAILBOX_1):
+ state = CANx->TSR & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1);
+ break;
+ case (CAN_TXMAILBOX_2):
+ state = CANx->TSR & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2);
+ break;
+ default:
+ state = CAN_TxStatus_Failed;
+ break;
+ }
+ switch (state)
+ {
+ /* transmit pending */
+ case (0x0): state = CAN_TxStatus_Pending;
+ break;
+ /* transmit failed */
+ case (CAN_TSR_RQCP0 | CAN_TSR_TME0): state = CAN_TxStatus_Failed;
+ break;
+ case (CAN_TSR_RQCP1 | CAN_TSR_TME1): state = CAN_TxStatus_Failed;
+ break;
+ case (CAN_TSR_RQCP2 | CAN_TSR_TME2): state = CAN_TxStatus_Failed;
+ break;
+ /* transmit succeeded */
+ case (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0):state = CAN_TxStatus_Ok;
+ break;
+ case (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1):state = CAN_TxStatus_Ok;
+ break;
+ case (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2):state = CAN_TxStatus_Ok;
+ break;
+ default: state = CAN_TxStatus_Failed;
+ break;
+ }
+ return (uint8_t) state;
+}
+
+/**
+ * @brief Cancels a transmit request.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param Mailbox: Mailbox number.
+ * @retval None.
+ */
+void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_TRANSMITMAILBOX(Mailbox));
+ /* abort transmission */
+ switch (Mailbox)
+ {
+ case (CAN_TXMAILBOX_0): CANx->TSR |= CAN_TSR_ABRQ0;
+ break;
+ case (CAN_TXMAILBOX_1): CANx->TSR |= CAN_TSR_ABRQ1;
+ break;
+ case (CAN_TXMAILBOX_2): CANx->TSR |= CAN_TSR_ABRQ2;
+ break;
+ default:
+ break;
+ }
+}
+
+
+/**
+ * @brief Receives a message.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @param RxMessage: pointer to a structure receive message which contains
+ * CAN Id, CAN DLC, CAN datas and FMI number.
+ * @retval None.
+ */
+void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_FIFO(FIFONumber));
+ /* Get the Id */
+ RxMessage->IDE = (uint8_t)0x04 & CANx->sFIFOMailBox[FIFONumber].RIR;
+ if (RxMessage->IDE == CAN_Id_Standard)
+ {
+ RxMessage->StdId = (uint32_t)0x000007FF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 21);
+ }
+ else
+ {
+ RxMessage->ExtId = (uint32_t)0x1FFFFFFF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 3);
+ }
+
+ RxMessage->RTR = (uint8_t)0x02 & CANx->sFIFOMailBox[FIFONumber].RIR;
+ /* Get the DLC */
+ RxMessage->DLC = (uint8_t)0x0F & CANx->sFIFOMailBox[FIFONumber].RDTR;
+ /* Get the FMI */
+ RxMessage->FMI = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDTR >> 8);
+ /* Get the data field */
+ RxMessage->Data[0] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDLR;
+ RxMessage->Data[1] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 8);
+ RxMessage->Data[2] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 16);
+ RxMessage->Data[3] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 24);
+ RxMessage->Data[4] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDHR;
+ RxMessage->Data[5] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 8);
+ RxMessage->Data[6] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 16);
+ RxMessage->Data[7] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 24);
+ /* Release the FIFO */
+ /* Release FIFO0 */
+ if (FIFONumber == CAN_FIFO0)
+ {
+ CANx->RF0R |= CAN_RF0R_RFOM0;
+ }
+ /* Release FIFO1 */
+ else /* FIFONumber == CAN_FIFO1 */
+ {
+ CANx->RF1R |= CAN_RF1R_RFOM1;
+ }
+}
+
+/**
+ * @brief Releases the specified FIFO.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param FIFONumber: FIFO to release, CAN_FIFO0 or CAN_FIFO1.
+ * @retval None.
+ */
+void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_FIFO(FIFONumber));
+ /* Release FIFO0 */
+ if (FIFONumber == CAN_FIFO0)
+ {
+ CANx->RF0R |= CAN_RF0R_RFOM0;
+ }
+ /* Release FIFO1 */
+ else /* FIFONumber == CAN_FIFO1 */
+ {
+ CANx->RF1R |= CAN_RF1R_RFOM1;
+ }
+}
+
+/**
+ * @brief Returns the number of pending messages.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval NbMessage : which is the number of pending message.
+ */
+uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber)
+{
+ uint8_t message_pending=0;
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_FIFO(FIFONumber));
+ if (FIFONumber == CAN_FIFO0)
+ {
+ message_pending = (uint8_t)(CANx->RF0R&(uint32_t)0x03);
+ }
+ else if (FIFONumber == CAN_FIFO1)
+ {
+ message_pending = (uint8_t)(CANx->RF1R&(uint32_t)0x03);
+ }
+ else
+ {
+ message_pending = 0;
+ }
+ return message_pending;
+}
+
+
+/**
+ * @brief Select the CAN Operation mode.
+ * @param CAN_OperatingMode : CAN Operating Mode. This parameter can be one
+ * of @ref CAN_OperatingMode_TypeDef enumeration.
+ * @retval status of the requested mode which can be
+ * - CAN_ModeStatus_Failed CAN failed entering the specific mode
+ * - CAN_ModeStatus_Success CAN Succeed entering the specific mode
+
+ */
+uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode)
+{
+ uint8_t status = CAN_ModeStatus_Failed;
+
+ /* Timeout for INAK or also for SLAK bits*/
+ uint32_t timeout = INAK_TIMEOUT;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_OPERATING_MODE(CAN_OperatingMode));
+
+ if (CAN_OperatingMode == CAN_OperatingMode_Initialization)
+ {
+ /* Request initialisation */
+ CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_SLEEP)) | CAN_MCR_INRQ);
+
+ /* Wait the acknowledge */
+ while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) && (timeout != 0))
+ {
+ timeout--;
+ }
+ if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK)
+ {
+ status = CAN_ModeStatus_Failed;
+ }
+ else
+ {
+ status = CAN_ModeStatus_Success;
+ }
+ }
+ else if (CAN_OperatingMode == CAN_OperatingMode_Normal)
+ {
+ /* Request leave initialisation and sleep mode and enter Normal mode */
+ CANx->MCR &= (uint32_t)(~(CAN_MCR_SLEEP|CAN_MCR_INRQ));
+
+ /* Wait the acknowledge */
+ while (((CANx->MSR & CAN_MODE_MASK) != 0) && (timeout!=0))
+ {
+ timeout--;
+ }
+ if ((CANx->MSR & CAN_MODE_MASK) != 0)
+ {
+ status = CAN_ModeStatus_Failed;
+ }
+ else
+ {
+ status = CAN_ModeStatus_Success;
+ }
+ }
+ else if (CAN_OperatingMode == CAN_OperatingMode_Sleep)
+ {
+ /* Request Sleep mode */
+ CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP);
+
+ /* Wait the acknowledge */
+ while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) && (timeout!=0))
+ {
+ timeout--;
+ }
+ if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK)
+ {
+ status = CAN_ModeStatus_Failed;
+ }
+ else
+ {
+ status = CAN_ModeStatus_Success;
+ }
+ }
+ else
+ {
+ status = CAN_ModeStatus_Failed;
+ }
+
+ return (uint8_t) status;
+}
+
+/**
+ * @brief Enters the low power mode.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @retval status: CAN_Sleep_Ok if sleep entered, CAN_Sleep_Failed in an
+ * other case.
+ */
+uint8_t CAN_Sleep(CAN_TypeDef* CANx)
+{
+ uint8_t sleepstatus = CAN_Sleep_Failed;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ /* Request Sleep mode */
+ CANx->MCR = (((CANx->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP);
+
+ /* Sleep mode status */
+ if ((CANx->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) == CAN_MSR_SLAK)
+ {
+ /* Sleep mode not entered */
+ sleepstatus = CAN_Sleep_Ok;
+ }
+ /* return sleep mode status */
+ return (uint8_t)sleepstatus;
+}
+
+/**
+ * @brief Wakes the CAN up.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @retval status: CAN_WakeUp_Ok if sleep mode left, CAN_WakeUp_Failed in an
+ * other case.
+ */
+uint8_t CAN_WakeUp(CAN_TypeDef* CANx)
+{
+ uint32_t wait_slak = SLAK_TIMEOUT;
+ uint8_t wakeupstatus = CAN_WakeUp_Failed;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ /* Wake up request */
+ CANx->MCR &= ~(uint32_t)CAN_MCR_SLEEP;
+
+ /* Sleep mode status */
+ while(((CANx->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)&&(wait_slak!=0x00))
+ {
+ wait_slak--;
+ }
+ if((CANx->MSR & CAN_MSR_SLAK) != CAN_MSR_SLAK)
+ {
+ /* wake up done : Sleep mode exited */
+ wakeupstatus = CAN_WakeUp_Ok;
+ }
+ /* return wakeup status */
+ return (uint8_t)wakeupstatus;
+}
+
+
+/**
+ * @brief Returns the CANx's last error code (LEC).
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @retval CAN_ErrorCode: specifies the Error code :
+ * - CAN_ERRORCODE_NoErr No Error
+ * - CAN_ERRORCODE_StuffErr Stuff Error
+ * - CAN_ERRORCODE_FormErr Form Error
+ * - CAN_ERRORCODE_ACKErr Acknowledgment Error
+ * - CAN_ERRORCODE_BitRecessiveErr Bit Recessive Error
+ * - CAN_ERRORCODE_BitDominantErr Bit Dominant Error
+ * - CAN_ERRORCODE_CRCErr CRC Error
+ * - CAN_ERRORCODE_SoftwareSetErr Software Set Error
+ */
+
+uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx)
+{
+ uint8_t errorcode=0;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ /* Get the error code*/
+ errorcode = (((uint8_t)CANx->ESR) & (uint8_t)CAN_ESR_LEC);
+
+ /* Return the error code*/
+ return errorcode;
+}
+/**
+ * @brief Returns the CANx Receive Error Counter (REC).
+ * @note In case of an error during reception, this counter is incremented
+ * by 1 or by 8 depending on the error condition as defined by the CAN
+ * standard. After every successful reception, the counter is
+ * decremented by 1 or reset to 120 if its value was higher than 128.
+ * When the counter value exceeds 127, the CAN controller enters the
+ * error passive state.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @retval CAN Receive Error Counter.
+ */
+uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx)
+{
+ uint8_t counter=0;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ /* Get the Receive Error Counter*/
+ counter = (uint8_t)((CANx->ESR & CAN_ESR_REC)>> 24);
+
+ /* Return the Receive Error Counter*/
+ return counter;
+}
+
+
+/**
+ * @brief Returns the LSB of the 9-bit CANx Transmit Error Counter(TEC).
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @retval LSB of the 9-bit CAN Transmit Error Counter.
+ */
+uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx)
+{
+ uint8_t counter=0;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+
+ /* Get the LSB of the 9-bit CANx Transmit Error Counter(TEC) */
+ counter = (uint8_t)((CANx->ESR & CAN_ESR_TEC)>> 16);
+
+ /* Return the LSB of the 9-bit CANx Transmit Error Counter(TEC) */
+ return counter;
+}
+
+
+/**
+ * @brief Enables or disables the specified CANx interrupts.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param CAN_IT: specifies the CAN interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * - CAN_IT_TME,
+ * - CAN_IT_FMP0,
+ * - CAN_IT_FF0,
+ * - CAN_IT_FOV0,
+ * - CAN_IT_FMP1,
+ * - CAN_IT_FF1,
+ * - CAN_IT_FOV1,
+ * - CAN_IT_EWG,
+ * - CAN_IT_EPV,
+ * - CAN_IT_LEC,
+ * - CAN_IT_ERR,
+ * - CAN_IT_WKU or
+ * - CAN_IT_SLK.
+ * @param NewState: new state of the CAN interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None.
+ */
+void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_IT(CAN_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected CANx interrupt */
+ CANx->IER |= CAN_IT;
+ }
+ else
+ {
+ /* Disable the selected CANx interrupt */
+ CANx->IER &= ~CAN_IT;
+ }
+}
+/**
+ * @brief Checks whether the specified CAN flag is set or not.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param CAN_FLAG: specifies the flag to check.
+ * This parameter can be one of the following flags:
+ * - CAN_FLAG_EWG
+ * - CAN_FLAG_EPV
+ * - CAN_FLAG_BOF
+ * - CAN_FLAG_RQCP0
+ * - CAN_FLAG_RQCP1
+ * - CAN_FLAG_RQCP2
+ * - CAN_FLAG_FMP1
+ * - CAN_FLAG_FF1
+ * - CAN_FLAG_FOV1
+ * - CAN_FLAG_FMP0
+ * - CAN_FLAG_FF0
+ * - CAN_FLAG_FOV0
+ * - CAN_FLAG_WKU
+ * - CAN_FLAG_SLAK
+ * - CAN_FLAG_LEC
+ * @retval The new state of CAN_FLAG (SET or RESET).
+ */
+FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_GET_FLAG(CAN_FLAG));
+
+
+ if((CAN_FLAG & CAN_FLAGS_ESR) != (uint32_t)RESET)
+ {
+ /* Check the status of the specified CAN flag */
+ if ((CANx->ESR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+ {
+ /* CAN_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAN_FLAG is reset */
+ bitstatus = RESET;
+ }
+ }
+ else if((CAN_FLAG & CAN_FLAGS_MSR) != (uint32_t)RESET)
+ {
+ /* Check the status of the specified CAN flag */
+ if ((CANx->MSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+ {
+ /* CAN_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAN_FLAG is reset */
+ bitstatus = RESET;
+ }
+ }
+ else if((CAN_FLAG & CAN_FLAGS_TSR) != (uint32_t)RESET)
+ {
+ /* Check the status of the specified CAN flag */
+ if ((CANx->TSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+ {
+ /* CAN_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAN_FLAG is reset */
+ bitstatus = RESET;
+ }
+ }
+ else if((CAN_FLAG & CAN_FLAGS_RF0R) != (uint32_t)RESET)
+ {
+ /* Check the status of the specified CAN flag */
+ if ((CANx->RF0R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+ {
+ /* CAN_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAN_FLAG is reset */
+ bitstatus = RESET;
+ }
+ }
+ else /* If(CAN_FLAG & CAN_FLAGS_RF1R != (uint32_t)RESET) */
+ {
+ /* Check the status of the specified CAN flag */
+ if ((uint32_t)(CANx->RF1R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+ {
+ /* CAN_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CAN_FLAG is reset */
+ bitstatus = RESET;
+ }
+ }
+ /* Return the CAN_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the CAN's pending flags.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param CAN_FLAG: specifies the flag to clear.
+ * This parameter can be one of the following flags:
+ * - CAN_FLAG_RQCP0
+ * - CAN_FLAG_RQCP1
+ * - CAN_FLAG_RQCP2
+ * - CAN_FLAG_FF1
+ * - CAN_FLAG_FOV1
+ * - CAN_FLAG_FF0
+ * - CAN_FLAG_FOV0
+ * - CAN_FLAG_WKU
+ * - CAN_FLAG_SLAK
+ * - CAN_FLAG_LEC
+ * @retval None.
+ */
+void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG)
+{
+ uint32_t flagtmp=0;
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_CLEAR_FLAG(CAN_FLAG));
+
+ if (CAN_FLAG == CAN_FLAG_LEC) /* ESR register */
+ {
+ /* Clear the selected CAN flags */
+ CANx->ESR = (uint32_t)RESET;
+ }
+ else /* MSR or TSR or RF0R or RF1R */
+ {
+ flagtmp = CAN_FLAG & 0x000FFFFF;
+
+ if ((CAN_FLAG & CAN_FLAGS_RF0R)!=(uint32_t)RESET)
+ {
+ /* Receive Flags */
+ CANx->RF0R = (uint32_t)(flagtmp);
+ }
+ else if ((CAN_FLAG & CAN_FLAGS_RF1R)!=(uint32_t)RESET)
+ {
+ /* Receive Flags */
+ CANx->RF1R = (uint32_t)(flagtmp);
+ }
+ else if ((CAN_FLAG & CAN_FLAGS_TSR)!=(uint32_t)RESET)
+ {
+ /* Transmit Flags */
+ CANx->TSR = (uint32_t)(flagtmp);
+ }
+ else /* If((CAN_FLAG & CAN_FLAGS_MSR)!=(uint32_t)RESET) */
+ {
+ /* Operating mode Flags */
+ CANx->MSR = (uint32_t)(flagtmp);
+ }
+ }
+}
+
+/**
+ * @brief Checks whether the specified CANx interrupt has occurred or not.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param CAN_IT: specifies the CAN interrupt source to check.
+ * This parameter can be one of the following flags:
+ * - CAN_IT_TME
+ * - CAN_IT_FMP0
+ * - CAN_IT_FF0
+ * - CAN_IT_FOV0
+ * - CAN_IT_FMP1
+ * - CAN_IT_FF1
+ * - CAN_IT_FOV1
+ * - CAN_IT_WKU
+ * - CAN_IT_SLK
+ * - CAN_IT_EWG
+ * - CAN_IT_EPV
+ * - CAN_IT_BOF
+ * - CAN_IT_LEC
+ * - CAN_IT_ERR
+ * @retval The current state of CAN_IT (SET or RESET).
+ */
+ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT)
+{
+ ITStatus itstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_IT(CAN_IT));
+
+ /* check the enable interrupt bit */
+ if((CANx->IER & CAN_IT) != RESET)
+ {
+ /* in case the Interrupt is enabled, .... */
+ switch (CAN_IT)
+ {
+ case CAN_IT_TME:
+ /* Check CAN_TSR_RQCPx bits */
+ itstatus = CheckITStatus(CANx->TSR, CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2);
+ break;
+ case CAN_IT_FMP0:
+ /* Check CAN_RF0R_FMP0 bit */
+ itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FMP0);
+ break;
+ case CAN_IT_FF0:
+ /* Check CAN_RF0R_FULL0 bit */
+ itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FULL0);
+ break;
+ case CAN_IT_FOV0:
+ /* Check CAN_RF0R_FOVR0 bit */
+ itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FOVR0);
+ break;
+ case CAN_IT_FMP1:
+ /* Check CAN_RF1R_FMP1 bit */
+ itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FMP1);
+ break;
+ case CAN_IT_FF1:
+ /* Check CAN_RF1R_FULL1 bit */
+ itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FULL1);
+ break;
+ case CAN_IT_FOV1:
+ /* Check CAN_RF1R_FOVR1 bit */
+ itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FOVR1);
+ break;
+ case CAN_IT_WKU:
+ /* Check CAN_MSR_WKUI bit */
+ itstatus = CheckITStatus(CANx->MSR, CAN_MSR_WKUI);
+ break;
+ case CAN_IT_SLK:
+ /* Check CAN_MSR_SLAKI bit */
+ itstatus = CheckITStatus(CANx->MSR, CAN_MSR_SLAKI);
+ break;
+ case CAN_IT_EWG:
+ /* Check CAN_ESR_EWGF bit */
+ itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EWGF);
+ break;
+ case CAN_IT_EPV:
+ /* Check CAN_ESR_EPVF bit */
+ itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EPVF);
+ break;
+ case CAN_IT_BOF:
+ /* Check CAN_ESR_BOFF bit */
+ itstatus = CheckITStatus(CANx->ESR, CAN_ESR_BOFF);
+ break;
+ case CAN_IT_LEC:
+ /* Check CAN_ESR_LEC bit */
+ itstatus = CheckITStatus(CANx->ESR, CAN_ESR_LEC);
+ break;
+ case CAN_IT_ERR:
+ /* Check CAN_MSR_ERRI bit */
+ itstatus = CheckITStatus(CANx->MSR, CAN_MSR_ERRI);
+ break;
+ default :
+ /* in case of error, return RESET */
+ itstatus = RESET;
+ break;
+ }
+ }
+ else
+ {
+ /* in case the Interrupt is not enabled, return RESET */
+ itstatus = RESET;
+ }
+
+ /* Return the CAN_IT status */
+ return itstatus;
+}
+
+/**
+ * @brief Clears the CANx's interrupt pending bits.
+ * @param CANx: where x can be 1 or 2 to to select the CAN peripheral.
+ * @param CAN_IT: specifies the interrupt pending bit to clear.
+ * - CAN_IT_TME
+ * - CAN_IT_FF0
+ * - CAN_IT_FOV0
+ * - CAN_IT_FF1
+ * - CAN_IT_FOV1
+ * - CAN_IT_WKU
+ * - CAN_IT_SLK
+ * - CAN_IT_EWG
+ * - CAN_IT_EPV
+ * - CAN_IT_BOF
+ * - CAN_IT_LEC
+ * - CAN_IT_ERR
+ * @retval None.
+ */
+void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_CAN_ALL_PERIPH(CANx));
+ assert_param(IS_CAN_CLEAR_IT(CAN_IT));
+
+ switch (CAN_IT)
+ {
+ case CAN_IT_TME:
+ /* Clear CAN_TSR_RQCPx (rc_w1)*/
+ CANx->TSR = CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2;
+ break;
+ case CAN_IT_FF0:
+ /* Clear CAN_RF0R_FULL0 (rc_w1)*/
+ CANx->RF0R = CAN_RF0R_FULL0;
+ break;
+ case CAN_IT_FOV0:
+ /* Clear CAN_RF0R_FOVR0 (rc_w1)*/
+ CANx->RF0R = CAN_RF0R_FOVR0;
+ break;
+ case CAN_IT_FF1:
+ /* Clear CAN_RF1R_FULL1 (rc_w1)*/
+ CANx->RF1R = CAN_RF1R_FULL1;
+ break;
+ case CAN_IT_FOV1:
+ /* Clear CAN_RF1R_FOVR1 (rc_w1)*/
+ CANx->RF1R = CAN_RF1R_FOVR1;
+ break;
+ case CAN_IT_WKU:
+ /* Clear CAN_MSR_WKUI (rc_w1)*/
+ CANx->MSR = CAN_MSR_WKUI;
+ break;
+ case CAN_IT_SLK:
+ /* Clear CAN_MSR_SLAKI (rc_w1)*/
+ CANx->MSR = CAN_MSR_SLAKI;
+ break;
+ case CAN_IT_EWG:
+ /* Clear CAN_MSR_ERRI (rc_w1) */
+ CANx->MSR = CAN_MSR_ERRI;
+ /* Note : the corresponding Flag is cleared by hardware depending
+ of the CAN Bus status*/
+ break;
+ case CAN_IT_EPV:
+ /* Clear CAN_MSR_ERRI (rc_w1) */
+ CANx->MSR = CAN_MSR_ERRI;
+ /* Note : the corresponding Flag is cleared by hardware depending
+ of the CAN Bus status*/
+ break;
+ case CAN_IT_BOF:
+ /* Clear CAN_MSR_ERRI (rc_w1) */
+ CANx->MSR = CAN_MSR_ERRI;
+ /* Note : the corresponding Flag is cleared by hardware depending
+ of the CAN Bus status*/
+ break;
+ case CAN_IT_LEC:
+ /* Clear LEC bits */
+ CANx->ESR = RESET;
+ /* Clear CAN_MSR_ERRI (rc_w1) */
+ CANx->MSR = CAN_MSR_ERRI;
+ break;
+ case CAN_IT_ERR:
+ /*Clear LEC bits */
+ CANx->ESR = RESET;
+ /* Clear CAN_MSR_ERRI (rc_w1) */
+ CANx->MSR = CAN_MSR_ERRI;
+ /* Note : BOFF, EPVF and EWGF Flags are cleared by hardware depending
+ of the CAN Bus status*/
+ break;
+ default :
+ break;
+ }
+}
+
+/**
+ * @brief Checks whether the CAN interrupt has occurred or not.
+ * @param CAN_Reg: specifies the CAN interrupt register to check.
+ * @param It_Bit: specifies the interrupt source bit to check.
+ * @retval The new state of the CAN Interrupt (SET or RESET).
+ */
+static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit)
+{
+ ITStatus pendingbitstatus = RESET;
+
+ if ((CAN_Reg & It_Bit) != (uint32_t)RESET)
+ {
+ /* CAN_IT is set */
+ pendingbitstatus = SET;
+ }
+ else
+ {
+ /* CAN_IT is reset */
+ pendingbitstatus = RESET;
+ }
+ return pendingbitstatus;
+}
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c
new file mode 100644
index 0000000..08b501a
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_cec.c
@@ -0,0 +1,433 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_cec.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the CEC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_cec.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup CEC
+ * @brief CEC driver modules
+ * @{
+ */
+
+/** @defgroup CEC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Private_Defines
+ * @{
+ */
+
+/* ------------ CEC registers bit address in the alias region ----------- */
+#define CEC_OFFSET (CEC_BASE - PERIPH_BASE)
+
+/* --- CFGR Register ---*/
+
+/* Alias word address of PE bit */
+#define CFGR_OFFSET (CEC_OFFSET + 0x00)
+#define PE_BitNumber 0x00
+#define CFGR_PE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (PE_BitNumber * 4))
+
+/* Alias word address of IE bit */
+#define IE_BitNumber 0x01
+#define CFGR_IE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (IE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of TSOM bit */
+#define CSR_OFFSET (CEC_OFFSET + 0x10)
+#define TSOM_BitNumber 0x00
+#define CSR_TSOM_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TSOM_BitNumber * 4))
+
+/* Alias word address of TEOM bit */
+#define TEOM_BitNumber 0x01
+#define CSR_TEOM_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEOM_BitNumber * 4))
+
+#define CFGR_CLEAR_Mask (uint8_t)(0xF3) /* CFGR register Mask */
+#define FLAG_Mask ((uint32_t)0x00FFFFFF) /* CEC FLAG mask */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup CEC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the CEC peripheral registers to their default reset
+ * values.
+ * @param None
+ * @retval None
+ */
+void CEC_DeInit(void)
+{
+ /* Enable CEC reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, ENABLE);
+ /* Release CEC from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, DISABLE);
+}
+
+
+/**
+ * @brief Initializes the CEC peripheral according to the specified
+ * parameters in the CEC_InitStruct.
+ * @param CEC_InitStruct: pointer to an CEC_InitTypeDef structure that
+ * contains the configuration information for the specified
+ * CEC peripheral.
+ * @retval None
+ */
+void CEC_Init(CEC_InitTypeDef* CEC_InitStruct)
+{
+ uint16_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_CEC_BIT_TIMING_ERROR_MODE(CEC_InitStruct->CEC_BitTimingMode));
+ assert_param(IS_CEC_BIT_PERIOD_ERROR_MODE(CEC_InitStruct->CEC_BitPeriodMode));
+
+ /*---------------------------- CEC CFGR Configuration -----------------*/
+ /* Get the CEC CFGR value */
+ tmpreg = CEC->CFGR;
+
+ /* Clear BTEM and BPEM bits */
+ tmpreg &= CFGR_CLEAR_Mask;
+
+ /* Configure CEC: Bit Timing Error and Bit Period Error */
+ tmpreg |= (uint16_t)(CEC_InitStruct->CEC_BitTimingMode | CEC_InitStruct->CEC_BitPeriodMode);
+
+ /* Write to CEC CFGR register*/
+ CEC->CFGR = tmpreg;
+
+}
+
+/**
+ * @brief Enables or disables the specified CEC peripheral.
+ * @param NewState: new state of the CEC peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void CEC_Cmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CFGR_PE_BB = (uint32_t)NewState;
+
+ if(NewState == DISABLE)
+ {
+ /* Wait until the PE bit is cleared by hardware (Idle Line detected) */
+ while((CEC->CFGR & CEC_CFGR_PE) != (uint32_t)RESET)
+ {
+ }
+ }
+}
+
+/**
+ * @brief Enables or disables the CEC interrupt.
+ * @param NewState: new state of the CEC interrupt.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void CEC_ITConfig(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CFGR_IE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Defines the Own Address of the CEC device.
+ * @param CEC_OwnAddress: The CEC own address
+ * @retval None
+ */
+void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress)
+{
+ /* Check the parameters */
+ assert_param(IS_CEC_ADDRESS(CEC_OwnAddress));
+
+ /* Set the CEC own address */
+ CEC->OAR = CEC_OwnAddress;
+}
+
+/**
+ * @brief Sets the CEC prescaler value.
+ * @param CEC_Prescaler: CEC prescaler new value
+ * @retval None
+ */
+void CEC_SetPrescaler(uint16_t CEC_Prescaler)
+{
+ /* Check the parameters */
+ assert_param(IS_CEC_PRESCALER(CEC_Prescaler));
+
+ /* Set the Prescaler value*/
+ CEC->PRES = CEC_Prescaler;
+}
+
+/**
+ * @brief Transmits single data through the CEC peripheral.
+ * @param Data: the data to transmit.
+ * @retval None
+ */
+void CEC_SendDataByte(uint8_t Data)
+{
+ /* Transmit Data */
+ CEC->TXD = Data ;
+}
+
+
+/**
+ * @brief Returns the most recent received data by the CEC peripheral.
+ * @param None
+ * @retval The received data.
+ */
+uint8_t CEC_ReceiveDataByte(void)
+{
+ /* Receive Data */
+ return (uint8_t)(CEC->RXD);
+}
+
+/**
+ * @brief Starts a new message.
+ * @param None
+ * @retval None
+ */
+void CEC_StartOfMessage(void)
+{
+ /* Starts of new message */
+ *(__IO uint32_t *) CSR_TSOM_BB = (uint32_t)0x1;
+}
+
+/**
+ * @brief Transmits message with or without an EOM bit.
+ * @param NewState: new state of the CEC Tx End Of Message.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void CEC_EndOfMessageCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ /* The data byte will be transmitted with or without an EOM bit*/
+ *(__IO uint32_t *) CSR_TEOM_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Gets the CEC flag status
+ * @param CEC_FLAG: specifies the CEC flag to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_FLAG_BTE: Bit Timing Error
+ * @arg CEC_FLAG_BPE: Bit Period Error
+ * @arg CEC_FLAG_RBTFE: Rx Block Transfer Finished Error
+ * @arg CEC_FLAG_SBE: Start Bit Error
+ * @arg CEC_FLAG_ACKE: Block Acknowledge Error
+ * @arg CEC_FLAG_LINE: Line Error
+ * @arg CEC_FLAG_TBTFE: Tx Block Transfer Finished Error
+ * @arg CEC_FLAG_TEOM: Tx End Of Message
+ * @arg CEC_FLAG_TERR: Tx Error
+ * @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished
+ * @arg CEC_FLAG_RSOM: Rx Start Of Message
+ * @arg CEC_FLAG_REOM: Rx End Of Message
+ * @arg CEC_FLAG_RERR: Rx Error
+ * @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished
+ * @retval The new state of CEC_FLAG (SET or RESET)
+ */
+FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ uint32_t cecreg = 0, cecbase = 0;
+
+ /* Check the parameters */
+ assert_param(IS_CEC_GET_FLAG(CEC_FLAG));
+
+ /* Get the CEC peripheral base address */
+ cecbase = (uint32_t)(CEC_BASE);
+
+ /* Read flag register index */
+ cecreg = CEC_FLAG >> 28;
+
+ /* Get bit[23:0] of the flag */
+ CEC_FLAG &= FLAG_Mask;
+
+ if(cecreg != 0)
+ {
+ /* Flag in CEC ESR Register */
+ CEC_FLAG = (uint32_t)(CEC_FLAG >> 16);
+
+ /* Get the CEC ESR register address */
+ cecbase += 0xC;
+ }
+ else
+ {
+ /* Get the CEC CSR register address */
+ cecbase += 0x10;
+ }
+
+ if(((*(__IO uint32_t *)cecbase) & CEC_FLAG) != (uint32_t)RESET)
+ {
+ /* CEC_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CEC_FLAG is reset */
+ bitstatus = RESET;
+ }
+
+ /* Return the CEC_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the CEC's pending flags.
+ * @param CEC_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg CEC_FLAG_TERR: Tx Error
+ * @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished
+ * @arg CEC_FLAG_RSOM: Rx Start Of Message
+ * @arg CEC_FLAG_REOM: Rx End Of Message
+ * @arg CEC_FLAG_RERR: Rx Error
+ * @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished
+ * @retval None
+ */
+void CEC_ClearFlag(uint32_t CEC_FLAG)
+{
+ uint32_t tmp = 0x0;
+
+ /* Check the parameters */
+ assert_param(IS_CEC_CLEAR_FLAG(CEC_FLAG));
+
+ tmp = CEC->CSR & 0x2;
+
+ /* Clear the selected CEC flags */
+ CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_FLAG) & 0xFFFFFFFC) | tmp);
+}
+
+/**
+ * @brief Checks whether the specified CEC interrupt has occurred or not.
+ * @param CEC_IT: specifies the CEC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_IT_TERR: Tx Error
+ * @arg CEC_IT_TBTF: Tx Block Transfer Finished
+ * @arg CEC_IT_RERR: Rx Error
+ * @arg CEC_IT_RBTF: Rx Block Transfer Finished
+ * @retval The new state of CEC_IT (SET or RESET).
+ */
+ITStatus CEC_GetITStatus(uint8_t CEC_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t enablestatus = 0;
+
+ /* Check the parameters */
+ assert_param(IS_CEC_GET_IT(CEC_IT));
+
+ /* Get the CEC IT enable bit status */
+ enablestatus = (CEC->CFGR & (uint8_t)CEC_CFGR_IE) ;
+
+ /* Check the status of the specified CEC interrupt */
+ if (((CEC->CSR & CEC_IT) != (uint32_t)RESET) && enablestatus)
+ {
+ /* CEC_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* CEC_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the CEC_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the CEC's interrupt pending bits.
+ * @param CEC_IT: specifies the CEC interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg CEC_IT_TERR: Tx Error
+ * @arg CEC_IT_TBTF: Tx Block Transfer Finished
+ * @arg CEC_IT_RERR: Rx Error
+ * @arg CEC_IT_RBTF: Rx Block Transfer Finished
+ * @retval None
+ */
+void CEC_ClearITPendingBit(uint16_t CEC_IT)
+{
+ uint32_t tmp = 0x0;
+
+ /* Check the parameters */
+ assert_param(IS_CEC_GET_IT(CEC_IT));
+
+ tmp = CEC->CSR & 0x2;
+
+ /* Clear the selected CEC interrupt pending bits */
+ CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_IT) & 0xFFFFFFFC) | tmp);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c
new file mode 100644
index 0000000..ef0c047
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c
@@ -0,0 +1,160 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_crc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the CRC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_crc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup CRC
+ * @brief CRC driver modules
+ * @{
+ */
+
+/** @defgroup CRC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Resets the CRC Data register (DR).
+ * @param None
+ * @retval None
+ */
+void CRC_ResetDR(void)
+{
+ /* Reset CRC generator */
+ CRC->CR = CRC_CR_RESET;
+}
+
+/**
+ * @brief Computes the 32-bit CRC of a given data word(32-bit).
+ * @param Data: data word(32-bit) to compute its CRC
+ * @retval 32-bit CRC
+ */
+uint32_t CRC_CalcCRC(uint32_t Data)
+{
+ CRC->DR = Data;
+
+ return (CRC->DR);
+}
+
+/**
+ * @brief Computes the 32-bit CRC of a given buffer of data word(32-bit).
+ * @param pBuffer: pointer to the buffer containing the data to be computed
+ * @param BufferLength: length of the buffer to be computed
+ * @retval 32-bit CRC
+ */
+uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength)
+{
+ uint32_t index = 0;
+
+ for(index = 0; index < BufferLength; index++)
+ {
+ CRC->DR = pBuffer[index];
+ }
+ return (CRC->DR);
+}
+
+/**
+ * @brief Returns the current CRC value.
+ * @param None
+ * @retval 32-bit CRC
+ */
+uint32_t CRC_GetCRC(void)
+{
+ return (CRC->DR);
+}
+
+/**
+ * @brief Stores a 8-bit data in the Independent Data(ID) register.
+ * @param IDValue: 8-bit value to be stored in the ID register
+ * @retval None
+ */
+void CRC_SetIDRegister(uint8_t IDValue)
+{
+ CRC->IDR = IDValue;
+}
+
+/**
+ * @brief Returns the 8-bit data stored in the Independent Data(ID) register
+ * @param None
+ * @retval 8-bit value of the ID register
+ */
+uint8_t CRC_GetIDRegister(void)
+{
+ return (CRC->IDR);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c
new file mode 100644
index 0000000..025b8e2
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c
@@ -0,0 +1,571 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dac.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the DAC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_dac.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup DAC
+ * @brief DAC driver modules
+ * @{
+ */
+
+/** @defgroup DAC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Defines
+ * @{
+ */
+
+/* CR register Mask */
+#define CR_CLEAR_MASK ((uint32_t)0x00000FFE)
+
+/* DAC Dual Channels SWTRIG masks */
+#define DUAL_SWTRIG_SET ((uint32_t)0x00000003)
+#define DUAL_SWTRIG_RESET ((uint32_t)0xFFFFFFFC)
+
+/* DHR registers offsets */
+#define DHR12R1_OFFSET ((uint32_t)0x00000008)
+#define DHR12R2_OFFSET ((uint32_t)0x00000014)
+#define DHR12RD_OFFSET ((uint32_t)0x00000020)
+
+/* DOR register offset */
+#define DOR_OFFSET ((uint32_t)0x0000002C)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the DAC peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void DAC_DeInit(void)
+{
+ /* Enable DAC reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE);
+ /* Release DAC from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE);
+}
+
+/**
+ * @brief Initializes the DAC peripheral according to the specified
+ * parameters in the DAC_InitStruct.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure that
+ * contains the configuration information for the specified DAC channel.
+ * @retval None
+ */
+void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct)
+{
+ uint32_t tmpreg1 = 0, tmpreg2 = 0;
+ /* Check the DAC parameters */
+ assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger));
+ assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration));
+ assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude));
+ assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer));
+/*---------------------------- DAC CR Configuration --------------------------*/
+ /* Get the DAC CR value */
+ tmpreg1 = DAC->CR;
+ /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
+ tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel);
+ /* Configure for the selected DAC channel: buffer output, trigger, wave generation,
+ mask/amplitude for wave generation */
+ /* Set TSELx and TENx bits according to DAC_Trigger value */
+ /* Set WAVEx bits according to DAC_WaveGeneration value */
+ /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */
+ /* Set BOFFx bit according to DAC_OutputBuffer value */
+ tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration |
+ DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer);
+ /* Calculate CR register value depending on DAC_Channel */
+ tmpreg1 |= tmpreg2 << DAC_Channel;
+ /* Write to DAC CR */
+ DAC->CR = tmpreg1;
+}
+
+/**
+ * @brief Fills each DAC_InitStruct member with its default value.
+ * @param DAC_InitStruct : pointer to a DAC_InitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct)
+{
+/*--------------- Reset DAC init structure parameters values -----------------*/
+ /* Initialize the DAC_Trigger member */
+ DAC_InitStruct->DAC_Trigger = DAC_Trigger_None;
+ /* Initialize the DAC_WaveGeneration member */
+ DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None;
+ /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */
+ DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0;
+ /* Initialize the DAC_OutputBuffer member */
+ DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable;
+}
+
+/**
+ * @brief Enables or disables the specified DAC channel.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param NewState: new state of the DAC channel.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DAC channel */
+ DAC->CR |= (DAC_CR_EN1 << DAC_Channel);
+ }
+ else
+ {
+ /* Disable the selected DAC channel */
+ DAC->CR &= ~(DAC_CR_EN1 << DAC_Channel);
+ }
+}
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/**
+ * @brief Enables or disables the specified DAC interrupts.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_IT: specifies the DAC interrupt sources to be enabled or disabled.
+ * This parameter can be the following values:
+ * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
+ * @param NewState: new state of the specified DAC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_DAC_IT(DAC_IT));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DAC interrupts */
+ DAC->CR |= (DAC_IT << DAC_Channel);
+ }
+ else
+ {
+ /* Disable the selected DAC interrupts */
+ DAC->CR &= (~(uint32_t)(DAC_IT << DAC_Channel));
+ }
+}
+#endif
+
+/**
+ * @brief Enables or disables the specified DAC channel DMA request.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param NewState: new state of the selected DAC channel DMA request.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DAC channel DMA request */
+ DAC->CR |= (DAC_CR_DMAEN1 << DAC_Channel);
+ }
+ else
+ {
+ /* Disable the selected DAC channel DMA request */
+ DAC->CR &= ~(DAC_CR_DMAEN1 << DAC_Channel);
+ }
+}
+
+/**
+ * @brief Enables or disables the selected DAC channel software trigger.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param NewState: new state of the selected DAC channel software trigger.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable software trigger for the selected DAC channel */
+ DAC->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4);
+ }
+ else
+ {
+ /* Disable software trigger for the selected DAC channel */
+ DAC->SWTRIGR &= ~((uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4));
+ }
+}
+
+/**
+ * @brief Enables or disables simultaneously the two DAC channels software
+ * triggers.
+ * @param NewState: new state of the DAC channels software triggers.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_DualSoftwareTriggerCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable software trigger for both DAC channels */
+ DAC->SWTRIGR |= DUAL_SWTRIG_SET ;
+ }
+ else
+ {
+ /* Disable software trigger for both DAC channels */
+ DAC->SWTRIGR &= DUAL_SWTRIG_RESET;
+ }
+}
+
+/**
+ * @brief Enables or disables the selected DAC channel wave generation.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_Wave: Specifies the wave type to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg DAC_Wave_Noise: noise wave generation
+ * @arg DAC_Wave_Triangle: triangle wave generation
+ * @param NewState: new state of the selected DAC channel wave generation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_WAVE(DAC_Wave));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected wave generation for the selected DAC channel */
+ DAC->CR |= DAC_Wave << DAC_Channel;
+ }
+ else
+ {
+ /* Disable the selected wave generation for the selected DAC channel */
+ DAC->CR &= ~(DAC_Wave << DAC_Channel);
+ }
+}
+
+/**
+ * @brief Set the specified data holding register value for DAC channel1.
+ * @param DAC_Align: Specifies the data alignment for DAC channel1.
+ * This parameter can be one of the following values:
+ * @arg DAC_Align_8b_R: 8bit right data alignment selected
+ * @arg DAC_Align_12b_L: 12bit left data alignment selected
+ * @arg DAC_Align_12b_R: 12bit right data alignment selected
+ * @param Data : Data to be loaded in the selected data holding register.
+ * @retval None
+ */
+void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALIGN(DAC_Align));
+ assert_param(IS_DAC_DATA(Data));
+
+ tmp = (uint32_t)DAC_BASE;
+ tmp += DHR12R1_OFFSET + DAC_Align;
+
+ /* Set the DAC channel1 selected data holding register */
+ *(__IO uint32_t *) tmp = Data;
+}
+
+/**
+ * @brief Set the specified data holding register value for DAC channel2.
+ * @param DAC_Align: Specifies the data alignment for DAC channel2.
+ * This parameter can be one of the following values:
+ * @arg DAC_Align_8b_R: 8bit right data alignment selected
+ * @arg DAC_Align_12b_L: 12bit left data alignment selected
+ * @arg DAC_Align_12b_R: 12bit right data alignment selected
+ * @param Data : Data to be loaded in the selected data holding register.
+ * @retval None
+ */
+void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALIGN(DAC_Align));
+ assert_param(IS_DAC_DATA(Data));
+
+ tmp = (uint32_t)DAC_BASE;
+ tmp += DHR12R2_OFFSET + DAC_Align;
+
+ /* Set the DAC channel2 selected data holding register */
+ *(__IO uint32_t *)tmp = Data;
+}
+
+/**
+ * @brief Set the specified data holding register value for dual channel
+ * DAC.
+ * @param DAC_Align: Specifies the data alignment for dual channel DAC.
+ * This parameter can be one of the following values:
+ * @arg DAC_Align_8b_R: 8bit right data alignment selected
+ * @arg DAC_Align_12b_L: 12bit left data alignment selected
+ * @arg DAC_Align_12b_R: 12bit right data alignment selected
+ * @param Data2: Data for DAC Channel2 to be loaded in the selected data
+ * holding register.
+ * @param Data1: Data for DAC Channel1 to be loaded in the selected data
+ * holding register.
+ * @retval None
+ */
+void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1)
+{
+ uint32_t data = 0, tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALIGN(DAC_Align));
+ assert_param(IS_DAC_DATA(Data1));
+ assert_param(IS_DAC_DATA(Data2));
+
+ /* Calculate and set dual DAC data holding register value */
+ if (DAC_Align == DAC_Align_8b_R)
+ {
+ data = ((uint32_t)Data2 << 8) | Data1;
+ }
+ else
+ {
+ data = ((uint32_t)Data2 << 16) | Data1;
+ }
+
+ tmp = (uint32_t)DAC_BASE;
+ tmp += DHR12RD_OFFSET + DAC_Align;
+
+ /* Set the dual DAC selected data holding register */
+ *(__IO uint32_t *)tmp = data;
+}
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @retval The selected DAC channel data output value.
+ */
+uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+
+ tmp = (uint32_t) DAC_BASE ;
+ tmp += DOR_OFFSET + ((uint32_t)DAC_Channel >> 2);
+
+ /* Returns the DAC channel data output register value */
+ return (uint16_t) (*(__IO uint32_t*) tmp);
+}
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/**
+ * @brief Checks whether the specified DAC flag is set or not.
+ * @param DAC_Channel: thee selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_FLAG: specifies the flag to check.
+ * This parameter can be only of the following value:
+ * @arg DAC_FLAG_DMAUDR: DMA underrun flag
+ * @retval The new state of DAC_FLAG (SET or RESET).
+ */
+FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_FLAG(DAC_FLAG));
+
+ /* Check the status of the specified DAC flag */
+ if ((DAC->SR & (DAC_FLAG << DAC_Channel)) != (uint8_t)RESET)
+ {
+ /* DAC_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* DAC_FLAG is reset */
+ bitstatus = RESET;
+ }
+ /* Return the DAC_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the DAC channelx's pending flags.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_FLAG: specifies the flag to clear.
+ * This parameter can be of the following value:
+ * @arg DAC_FLAG_DMAUDR: DMA underrun flag
+ * @retval None
+ */
+void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_FLAG(DAC_FLAG));
+
+ /* Clear the selected DAC flags */
+ DAC->SR = (DAC_FLAG << DAC_Channel);
+}
+
+/**
+ * @brief Checks whether the specified DAC interrupt has occurred or not.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_IT: specifies the DAC interrupt source to check.
+ * This parameter can be the following values:
+ * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
+ * @retval The new state of DAC_IT (SET or RESET).
+ */
+ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t enablestatus = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_IT(DAC_IT));
+
+ /* Get the DAC_IT enable bit status */
+ enablestatus = (DAC->CR & (DAC_IT << DAC_Channel)) ;
+
+ /* Check the status of the specified DAC interrupt */
+ if (((DAC->SR & (DAC_IT << DAC_Channel)) != (uint32_t)RESET) && enablestatus)
+ {
+ /* DAC_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* DAC_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the DAC_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the DAC channelx's interrupt pending bits.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_IT: specifies the DAC interrupt pending bit to clear.
+ * This parameter can be the following values:
+ * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
+ * @retval None
+ */
+void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_IT(DAC_IT));
+
+ /* Clear the selected DAC interrupt pending bits */
+ DAC->SR = (DAC_IT << DAC_Channel);
+}
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c
new file mode 100644
index 0000000..d34307b
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c
@@ -0,0 +1,162 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dbgmcu.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the DBGMCU firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_dbgmcu.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup DBGMCU
+ * @brief DBGMCU driver modules
+ * @{
+ */
+
+/** @defgroup DBGMCU_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Private_Defines
+ * @{
+ */
+
+#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF)
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DBGMCU_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Returns the device revision identifier.
+ * @param None
+ * @retval Device revision identifier
+ */
+uint32_t DBGMCU_GetREVID(void)
+{
+ return(DBGMCU->IDCODE >> 16);
+}
+
+/**
+ * @brief Returns the device identifier.
+ * @param None
+ * @retval Device identifier
+ */
+uint32_t DBGMCU_GetDEVID(void)
+{
+ return(DBGMCU->IDCODE & IDCODE_DEVID_MASK);
+}
+
+/**
+ * @brief Configures the specified peripheral and low power mode behavior
+ * when the MCU under Debug mode.
+ * @param DBGMCU_Periph: specifies the peripheral and low power mode.
+ * This parameter can be any combination of the following values:
+ * @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode
+ * @arg DBGMCU_STOP: Keep debugger connection during STOP mode
+ * @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode
+ * @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted
+ * @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted
+ * @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted
+ * @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted
+ * @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted
+ * @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted
+ * @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted
+ * @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted
+ * @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted
+ * @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted
+ * @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted
+ * @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted
+ * @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted
+ * @arg DBGMCU_CAN2_STOP: Debug CAN2 stopped when Core is halted
+ * @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted
+ * @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted
+ * @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted
+ * @arg DBGMCU_TIM9_STOP: TIM9 counter stopped when Core is halted
+ * @arg DBGMCU_TIM10_STOP: TIM10 counter stopped when Core is halted
+ * @arg DBGMCU_TIM11_STOP: TIM11 counter stopped when Core is halted
+ * @arg DBGMCU_TIM12_STOP: TIM12 counter stopped when Core is halted
+ * @arg DBGMCU_TIM13_STOP: TIM13 counter stopped when Core is halted
+ * @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted
+ * @param NewState: new state of the specified peripheral in Debug mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ DBGMCU->CR |= DBGMCU_Periph;
+ }
+ else
+ {
+ DBGMCU->CR &= ~DBGMCU_Periph;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c
new file mode 100644
index 0000000..0c86f90
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c
@@ -0,0 +1,714 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_dma.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the DMA firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_dma.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup DMA
+ * @brief DMA driver modules
+ * @{
+ */
+
+/** @defgroup DMA_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Private_Defines
+ * @{
+ */
+
+
+/* DMA1 Channelx interrupt pending bit masks */
+#define DMA1_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1))
+#define DMA1_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2))
+#define DMA1_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3))
+#define DMA1_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4))
+#define DMA1_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5))
+#define DMA1_Channel6_IT_Mask ((uint32_t)(DMA_ISR_GIF6 | DMA_ISR_TCIF6 | DMA_ISR_HTIF6 | DMA_ISR_TEIF6))
+#define DMA1_Channel7_IT_Mask ((uint32_t)(DMA_ISR_GIF7 | DMA_ISR_TCIF7 | DMA_ISR_HTIF7 | DMA_ISR_TEIF7))
+
+/* DMA2 Channelx interrupt pending bit masks */
+#define DMA2_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1))
+#define DMA2_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2))
+#define DMA2_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3))
+#define DMA2_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4))
+#define DMA2_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5))
+
+/* DMA2 FLAG mask */
+#define FLAG_Mask ((uint32_t)0x10000000)
+
+/* DMA registers Masks */
+#define CCR_CLEAR_Mask ((uint32_t)0xFFFF800F)
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the DMAy Channelx registers to their default reset
+ * values.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @retval None
+ */
+void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+
+ /* Disable the selected DMAy Channelx */
+ DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN);
+
+ /* Reset DMAy Channelx control register */
+ DMAy_Channelx->CCR = 0;
+
+ /* Reset DMAy Channelx remaining bytes register */
+ DMAy_Channelx->CNDTR = 0;
+
+ /* Reset DMAy Channelx peripheral address register */
+ DMAy_Channelx->CPAR = 0;
+
+ /* Reset DMAy Channelx memory address register */
+ DMAy_Channelx->CMAR = 0;
+
+ if (DMAy_Channelx == DMA1_Channel1)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel1 */
+ DMA1->IFCR |= DMA1_Channel1_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel2)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel2 */
+ DMA1->IFCR |= DMA1_Channel2_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel3)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel3 */
+ DMA1->IFCR |= DMA1_Channel3_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel4)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel4 */
+ DMA1->IFCR |= DMA1_Channel4_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel5)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel5 */
+ DMA1->IFCR |= DMA1_Channel5_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel6)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel6 */
+ DMA1->IFCR |= DMA1_Channel6_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA1_Channel7)
+ {
+ /* Reset interrupt pending bits for DMA1 Channel7 */
+ DMA1->IFCR |= DMA1_Channel7_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA2_Channel1)
+ {
+ /* Reset interrupt pending bits for DMA2 Channel1 */
+ DMA2->IFCR |= DMA2_Channel1_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA2_Channel2)
+ {
+ /* Reset interrupt pending bits for DMA2 Channel2 */
+ DMA2->IFCR |= DMA2_Channel2_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA2_Channel3)
+ {
+ /* Reset interrupt pending bits for DMA2 Channel3 */
+ DMA2->IFCR |= DMA2_Channel3_IT_Mask;
+ }
+ else if (DMAy_Channelx == DMA2_Channel4)
+ {
+ /* Reset interrupt pending bits for DMA2 Channel4 */
+ DMA2->IFCR |= DMA2_Channel4_IT_Mask;
+ }
+ else
+ {
+ if (DMAy_Channelx == DMA2_Channel5)
+ {
+ /* Reset interrupt pending bits for DMA2 Channel5 */
+ DMA2->IFCR |= DMA2_Channel5_IT_Mask;
+ }
+ }
+}
+
+/**
+ * @brief Initializes the DMAy Channelx according to the specified
+ * parameters in the DMA_InitStruct.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @param DMA_InitStruct: pointer to a DMA_InitTypeDef structure that
+ * contains the configuration information for the specified DMA Channel.
+ * @retval None
+ */
+void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+ assert_param(IS_DMA_DIR(DMA_InitStruct->DMA_DIR));
+ assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize));
+ assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc));
+ assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc));
+ assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize));
+ assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize));
+ assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode));
+ assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority));
+ assert_param(IS_DMA_M2M_STATE(DMA_InitStruct->DMA_M2M));
+
+/*--------------------------- DMAy Channelx CCR Configuration -----------------*/
+ /* Get the DMAy_Channelx CCR value */
+ tmpreg = DMAy_Channelx->CCR;
+ /* Clear MEM2MEM, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */
+ tmpreg &= CCR_CLEAR_Mask;
+ /* Configure DMAy Channelx: data transfer, data size, priority level and mode */
+ /* Set DIR bit according to DMA_DIR value */
+ /* Set CIRC bit according to DMA_Mode value */
+ /* Set PINC bit according to DMA_PeripheralInc value */
+ /* Set MINC bit according to DMA_MemoryInc value */
+ /* Set PSIZE bits according to DMA_PeripheralDataSize value */
+ /* Set MSIZE bits according to DMA_MemoryDataSize value */
+ /* Set PL bits according to DMA_Priority value */
+ /* Set the MEM2MEM bit according to DMA_M2M value */
+ tmpreg |= DMA_InitStruct->DMA_DIR | DMA_InitStruct->DMA_Mode |
+ DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc |
+ DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize |
+ DMA_InitStruct->DMA_Priority | DMA_InitStruct->DMA_M2M;
+
+ /* Write to DMAy Channelx CCR */
+ DMAy_Channelx->CCR = tmpreg;
+
+/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/
+ /* Write to DMAy Channelx CNDTR */
+ DMAy_Channelx->CNDTR = DMA_InitStruct->DMA_BufferSize;
+
+/*--------------------------- DMAy Channelx CPAR Configuration ----------------*/
+ /* Write to DMAy Channelx CPAR */
+ DMAy_Channelx->CPAR = DMA_InitStruct->DMA_PeripheralBaseAddr;
+
+/*--------------------------- DMAy Channelx CMAR Configuration ----------------*/
+ /* Write to DMAy Channelx CMAR */
+ DMAy_Channelx->CMAR = DMA_InitStruct->DMA_MemoryBaseAddr;
+}
+
+/**
+ * @brief Fills each DMA_InitStruct member with its default value.
+ * @param DMA_InitStruct : pointer to a DMA_InitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct)
+{
+/*-------------- Reset DMA init structure parameters values ------------------*/
+ /* Initialize the DMA_PeripheralBaseAddr member */
+ DMA_InitStruct->DMA_PeripheralBaseAddr = 0;
+ /* Initialize the DMA_MemoryBaseAddr member */
+ DMA_InitStruct->DMA_MemoryBaseAddr = 0;
+ /* Initialize the DMA_DIR member */
+ DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralSRC;
+ /* Initialize the DMA_BufferSize member */
+ DMA_InitStruct->DMA_BufferSize = 0;
+ /* Initialize the DMA_PeripheralInc member */
+ DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable;
+ /* Initialize the DMA_MemoryInc member */
+ DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable;
+ /* Initialize the DMA_PeripheralDataSize member */
+ DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
+ /* Initialize the DMA_MemoryDataSize member */
+ DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
+ /* Initialize the DMA_Mode member */
+ DMA_InitStruct->DMA_Mode = DMA_Mode_Normal;
+ /* Initialize the DMA_Priority member */
+ DMA_InitStruct->DMA_Priority = DMA_Priority_Low;
+ /* Initialize the DMA_M2M member */
+ DMA_InitStruct->DMA_M2M = DMA_M2M_Disable;
+}
+
+/**
+ * @brief Enables or disables the specified DMAy Channelx.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @param NewState: new state of the DMAy Channelx.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DMAy Channelx */
+ DMAy_Channelx->CCR |= DMA_CCR1_EN;
+ }
+ else
+ {
+ /* Disable the selected DMAy Channelx */
+ DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN);
+ }
+}
+
+/**
+ * @brief Enables or disables the specified DMAy Channelx interrupts.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @param DMA_IT: specifies the DMA interrupts sources to be enabled
+ * or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @param NewState: new state of the specified DMA interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+ assert_param(IS_DMA_CONFIG_IT(DMA_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DMA interrupts */
+ DMAy_Channelx->CCR |= DMA_IT;
+ }
+ else
+ {
+ /* Disable the selected DMA interrupts */
+ DMAy_Channelx->CCR &= ~DMA_IT;
+ }
+}
+
+/**
+ * @brief Sets the number of data units in the current DMAy Channelx transfer.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @param DataNumber: The number of data units in the current DMAy Channelx
+ * transfer.
+ * @note This function can only be used when the DMAy_Channelx is disabled.
+ * @retval None.
+ */
+void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+
+/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/
+ /* Write to DMAy Channelx CNDTR */
+ DMAy_Channelx->CNDTR = DataNumber;
+}
+
+/**
+ * @brief Returns the number of remaining data units in the current
+ * DMAy Channelx transfer.
+ * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+ * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+ * @retval The number of remaining data units in the current DMAy Channelx
+ * transfer.
+ */
+uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+ /* Return the number of remaining data units for DMAy Channelx */
+ return ((uint16_t)(DMAy_Channelx->CNDTR));
+}
+
+/**
+ * @brief Checks whether the specified DMAy Channelx flag is set or not.
+ * @param DMAy_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag.
+ * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
+ * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag.
+ * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag.
+ * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag.
+ * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag.
+ * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag.
+ * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag.
+ * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag.
+ * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag.
+ * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag.
+ * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag.
+ * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag.
+ * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag.
+ * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag.
+ * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag.
+ * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag.
+ * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag.
+ * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag.
+ * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag.
+ * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag.
+ * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag.
+ * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag.
+ * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag.
+ * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag.
+ * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag.
+ * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag.
+ * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag.
+ * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag.
+ * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag.
+ * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag.
+ * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag.
+ * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag.
+ * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag.
+ * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag.
+ * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag.
+ * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag.
+ * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag.
+ * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag.
+ * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag.
+ * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag.
+ * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag.
+ * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag.
+ * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag.
+ * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag.
+ * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag.
+ * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag.
+ * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
+ * @retval The new state of DMAy_FLAG (SET or RESET).
+ */
+FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_GET_FLAG(DMAy_FLAG));
+
+ /* Calculate the used DMAy */
+ if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET)
+ {
+ /* Get DMA2 ISR register value */
+ tmpreg = DMA2->ISR ;
+ }
+ else
+ {
+ /* Get DMA1 ISR register value */
+ tmpreg = DMA1->ISR ;
+ }
+
+ /* Check the status of the specified DMAy flag */
+ if ((tmpreg & DMAy_FLAG) != (uint32_t)RESET)
+ {
+ /* DMAy_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* DMAy_FLAG is reset */
+ bitstatus = RESET;
+ }
+
+ /* Return the DMAy_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the DMAy Channelx's pending flags.
+ * @param DMAy_FLAG: specifies the flag to clear.
+ * This parameter can be any combination (for the same DMA) of the following values:
+ * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag.
+ * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
+ * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag.
+ * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag.
+ * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag.
+ * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag.
+ * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag.
+ * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag.
+ * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag.
+ * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag.
+ * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag.
+ * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag.
+ * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag.
+ * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag.
+ * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag.
+ * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag.
+ * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag.
+ * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag.
+ * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag.
+ * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag.
+ * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag.
+ * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag.
+ * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag.
+ * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag.
+ * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag.
+ * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag.
+ * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag.
+ * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag.
+ * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag.
+ * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag.
+ * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag.
+ * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag.
+ * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag.
+ * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag.
+ * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag.
+ * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag.
+ * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag.
+ * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag.
+ * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag.
+ * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag.
+ * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag.
+ * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag.
+ * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag.
+ * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag.
+ * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag.
+ * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag.
+ * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag.
+ * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
+ * @retval None
+ */
+void DMA_ClearFlag(uint32_t DMAy_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_CLEAR_FLAG(DMAy_FLAG));
+
+ /* Calculate the used DMAy */
+ if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET)
+ {
+ /* Clear the selected DMAy flags */
+ DMA2->IFCR = DMAy_FLAG;
+ }
+ else
+ {
+ /* Clear the selected DMAy flags */
+ DMA1->IFCR = DMAy_FLAG;
+ }
+}
+
+/**
+ * @brief Checks whether the specified DMAy Channelx interrupt has occurred or not.
+ * @param DMAy_IT: specifies the DMAy interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt.
+ * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
+ * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt.
+ * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt.
+ * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt.
+ * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt.
+ * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt.
+ * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt.
+ * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt.
+ * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt.
+ * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt.
+ * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt.
+ * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt.
+ * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt.
+ * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt.
+ * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt.
+ * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt.
+ * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt.
+ * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt.
+ * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt.
+ * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt.
+ * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt.
+ * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt.
+ * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt.
+ * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt.
+ * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt.
+ * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt.
+ * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt.
+ * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt.
+ * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt.
+ * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt.
+ * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt.
+ * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt.
+ * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt.
+ * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt.
+ * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt.
+ * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt.
+ * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt.
+ * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt.
+ * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt.
+ * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt.
+ * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt.
+ * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt.
+ * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt.
+ * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt.
+ * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt.
+ * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt.
+ * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
+ * @retval The new state of DMAy_IT (SET or RESET).
+ */
+ITStatus DMA_GetITStatus(uint32_t DMAy_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DMA_GET_IT(DMAy_IT));
+
+ /* Calculate the used DMA */
+ if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET)
+ {
+ /* Get DMA2 ISR register value */
+ tmpreg = DMA2->ISR;
+ }
+ else
+ {
+ /* Get DMA1 ISR register value */
+ tmpreg = DMA1->ISR;
+ }
+
+ /* Check the status of the specified DMAy interrupt */
+ if ((tmpreg & DMAy_IT) != (uint32_t)RESET)
+ {
+ /* DMAy_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* DMAy_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the DMA_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the DMAy Channelx's interrupt pending bits.
+ * @param DMAy_IT: specifies the DMAy interrupt pending bit to clear.
+ * This parameter can be any combination (for the same DMA) of the following values:
+ * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt.
+ * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
+ * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt.
+ * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt.
+ * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt.
+ * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt.
+ * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt.
+ * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt.
+ * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt.
+ * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt.
+ * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt.
+ * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt.
+ * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt.
+ * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt.
+ * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt.
+ * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt.
+ * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt.
+ * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt.
+ * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt.
+ * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt.
+ * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt.
+ * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt.
+ * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt.
+ * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt.
+ * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt.
+ * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt.
+ * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt.
+ * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt.
+ * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt.
+ * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt.
+ * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt.
+ * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt.
+ * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt.
+ * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt.
+ * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt.
+ * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt.
+ * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt.
+ * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt.
+ * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt.
+ * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt.
+ * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt.
+ * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt.
+ * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt.
+ * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt.
+ * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt.
+ * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt.
+ * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt.
+ * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
+ * @retval None
+ */
+void DMA_ClearITPendingBit(uint32_t DMAy_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_DMA_CLEAR_IT(DMAy_IT));
+
+ /* Calculate the used DMAy */
+ if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET)
+ {
+ /* Clear the selected DMAy interrupt pending bits */
+ DMA2->IFCR = DMAy_IT;
+ }
+ else
+ {
+ /* Clear the selected DMAy interrupt pending bits */
+ DMA1->IFCR = DMAy_IT;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c
new file mode 100644
index 0000000..ab73462
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c
@@ -0,0 +1,269 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_exti.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the EXTI firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_exti.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup EXTI
+ * @brief EXTI driver modules
+ * @{
+ */
+
+/** @defgroup EXTI_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Private_Defines
+ * @{
+ */
+
+#define EXTI_LINENONE ((uint32_t)0x00000) /* No interrupt selected */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup EXTI_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the EXTI peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void EXTI_DeInit(void)
+{
+ EXTI->IMR = 0x00000000;
+ EXTI->EMR = 0x00000000;
+ EXTI->RTSR = 0x00000000;
+ EXTI->FTSR = 0x00000000;
+ EXTI->PR = 0x000FFFFF;
+}
+
+/**
+ * @brief Initializes the EXTI peripheral according to the specified
+ * parameters in the EXTI_InitStruct.
+ * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure
+ * that contains the configuration information for the EXTI peripheral.
+ * @retval None
+ */
+void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct)
+{
+ uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode));
+ assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger));
+ assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line));
+ assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd));
+
+ tmp = (uint32_t)EXTI_BASE;
+
+ if (EXTI_InitStruct->EXTI_LineCmd != DISABLE)
+ {
+ /* Clear EXTI line configuration */
+ EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line;
+ EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line;
+
+ tmp += EXTI_InitStruct->EXTI_Mode;
+
+ *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
+
+ /* Clear Rising Falling edge configuration */
+ EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line;
+ EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line;
+
+ /* Select the trigger for the selected external interrupts */
+ if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling)
+ {
+ /* Rising Falling edge */
+ EXTI->RTSR |= EXTI_InitStruct->EXTI_Line;
+ EXTI->FTSR |= EXTI_InitStruct->EXTI_Line;
+ }
+ else
+ {
+ tmp = (uint32_t)EXTI_BASE;
+ tmp += EXTI_InitStruct->EXTI_Trigger;
+
+ *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
+ }
+ }
+ else
+ {
+ tmp += EXTI_InitStruct->EXTI_Mode;
+
+ /* Disable the selected external lines */
+ *(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line;
+ }
+}
+
+/**
+ * @brief Fills each EXTI_InitStruct member with its reset value.
+ * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct)
+{
+ EXTI_InitStruct->EXTI_Line = EXTI_LINENONE;
+ EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt;
+ EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling;
+ EXTI_InitStruct->EXTI_LineCmd = DISABLE;
+}
+
+/**
+ * @brief Generates a Software interrupt.
+ * @param EXTI_Line: specifies the EXTI lines to be enabled or disabled.
+ * This parameter can be any combination of EXTI_Linex where x can be (0..19).
+ * @retval None
+ */
+void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line)
+{
+ /* Check the parameters */
+ assert_param(IS_EXTI_LINE(EXTI_Line));
+
+ EXTI->SWIER |= EXTI_Line;
+}
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param EXTI_Line: specifies the EXTI line flag to check.
+ * This parameter can be:
+ * @arg EXTI_Linex: External interrupt line x where x(0..19)
+ * @retval The new state of EXTI_Line (SET or RESET).
+ */
+FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_GET_EXTI_LINE(EXTI_Line));
+
+ if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param EXTI_Line: specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of EXTI_Linex where x can be (0..19).
+ * @retval None
+ */
+void EXTI_ClearFlag(uint32_t EXTI_Line)
+{
+ /* Check the parameters */
+ assert_param(IS_EXTI_LINE(EXTI_Line));
+
+ EXTI->PR = EXTI_Line;
+}
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param EXTI_Line: specifies the EXTI line to check.
+ * This parameter can be:
+ * @arg EXTI_Linex: External interrupt line x where x(0..19)
+ * @retval The new state of EXTI_Line (SET or RESET).
+ */
+ITStatus EXTI_GetITStatus(uint32_t EXTI_Line)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t enablestatus = 0;
+ /* Check the parameters */
+ assert_param(IS_GET_EXTI_LINE(EXTI_Line));
+
+ enablestatus = EXTI->IMR & EXTI_Line;
+ if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param EXTI_Line: specifies the EXTI lines to clear.
+ * This parameter can be any combination of EXTI_Linex where x can be (0..19).
+ * @retval None
+ */
+void EXTI_ClearITPendingBit(uint32_t EXTI_Line)
+{
+ /* Check the parameters */
+ assert_param(IS_EXTI_LINE(EXTI_Line));
+
+ EXTI->PR = EXTI_Line;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c
new file mode 100644
index 0000000..f6c7bf1
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c
@@ -0,0 +1,1684 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_flash.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the FLASH firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_flash.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup FLASH
+ * @brief FLASH driver modules
+ * @{
+ */
+
+/** @defgroup FLASH_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Defines
+ * @{
+ */
+
+/* Flash Access Control Register bits */
+#define ACR_LATENCY_Mask ((uint32_t)0x00000038)
+#define ACR_HLFCYA_Mask ((uint32_t)0xFFFFFFF7)
+#define ACR_PRFTBE_Mask ((uint32_t)0xFFFFFFEF)
+
+/* Flash Access Control Register bits */
+#define ACR_PRFTBS_Mask ((uint32_t)0x00000020)
+
+/* Flash Control Register bits */
+#define CR_PG_Set ((uint32_t)0x00000001)
+#define CR_PG_Reset ((uint32_t)0x00001FFE)
+#define CR_PER_Set ((uint32_t)0x00000002)
+#define CR_PER_Reset ((uint32_t)0x00001FFD)
+#define CR_MER_Set ((uint32_t)0x00000004)
+#define CR_MER_Reset ((uint32_t)0x00001FFB)
+#define CR_OPTPG_Set ((uint32_t)0x00000010)
+#define CR_OPTPG_Reset ((uint32_t)0x00001FEF)
+#define CR_OPTER_Set ((uint32_t)0x00000020)
+#define CR_OPTER_Reset ((uint32_t)0x00001FDF)
+#define CR_STRT_Set ((uint32_t)0x00000040)
+#define CR_LOCK_Set ((uint32_t)0x00000080)
+
+/* FLASH Mask */
+#define RDPRT_Mask ((uint32_t)0x00000002)
+#define WRP0_Mask ((uint32_t)0x000000FF)
+#define WRP1_Mask ((uint32_t)0x0000FF00)
+#define WRP2_Mask ((uint32_t)0x00FF0000)
+#define WRP3_Mask ((uint32_t)0xFF000000)
+#define OB_USER_BFB2 ((uint16_t)0x0008)
+
+/* FLASH Keys */
+#define RDP_Key ((uint16_t)0x00A5)
+#define FLASH_KEY1 ((uint32_t)0x45670123)
+#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
+
+/* FLASH BANK address */
+#define FLASH_BANK1_END_ADDRESS ((uint32_t)0x807FFFF)
+
+/* Delay definition */
+#define EraseTimeout ((uint32_t)0x000B0000)
+#define ProgramTimeout ((uint32_t)0x00002000)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Functions
+ * @{
+ */
+
+/**
+@code
+
+ This driver provides functions to configure and program the Flash memory of all STM32F10x devices,
+ including the latest STM32F10x_XL density devices.
+
+ STM32F10x_XL devices feature up to 1 Mbyte with dual bank architecture for read-while-write (RWW) capability:
+ - bank1: fixed size of 512 Kbytes (256 pages of 2Kbytes each)
+ - bank2: up to 512 Kbytes (up to 256 pages of 2Kbytes each)
+ While other STM32F10x devices features only one bank with memory up to 512 Kbytes.
+
+ In version V3.3.0, some functions were updated and new ones were added to support
+ STM32F10x_XL devices. Thus some functions manages all devices, while other are
+ dedicated for XL devices only.
+
+ The table below presents the list of available functions depending on the used STM32F10x devices.
+
+ ***************************************************
+ * Legacy functions used for all STM32F10x devices *
+ ***************************************************
+ +----------------------------------------------------------------------------------------------------------------------------------+
+ | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
+ | | devices | devices | |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_SetLatency | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_HalfCycleAccessCmd | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_PrefetchBufferCmd | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_Unlock | Yes | Yes | - For STM32F10X_XL devices: unlock Bank1 and Bank2. |
+ | | | | - For other devices: unlock Bank1 and it is equivalent |
+ | | | | to FLASH_UnlockBank1 function. |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_Lock | Yes | Yes | - For STM32F10X_XL devices: lock Bank1 and Bank2. |
+ | | | | - For other devices: lock Bank1 and it is equivalent |
+ | | | | to FLASH_LockBank1 function. |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ErasePage | Yes | Yes | - For STM32F10x_XL devices: erase a page in Bank1 and Bank2 |
+ | | | | - For other devices: erase a page in Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_EraseAllPages | Yes | Yes | - For STM32F10x_XL devices: erase all pages in Bank1 and Bank2 |
+ | | | | - For other devices: erase all pages in Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_EraseOptionBytes | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ProgramWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ProgramHalfWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ProgramOptionByteData | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_EnableWriteProtection | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ReadOutProtection | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_UserOptionByteConfig | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetUserOptionByte | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetWriteProtectionOptionByte | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetReadOutProtectionStatus | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetPrefetchBufferStatus | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ITConfig | Yes | Yes | - For STM32F10x_XL devices: enable Bank1 and Bank2's interrupts|
+ | | | | - For other devices: enable Bank1's interrupts |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetFlagStatus | Yes | Yes | - For STM32F10x_XL devices: return Bank1 and Bank2's flag status|
+ | | | | - For other devices: return Bank1's flag status |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ClearFlag | Yes | Yes | - For STM32F10x_XL devices: clear Bank1 and Bank2's flag |
+ | | | | - For other devices: clear Bank1's flag |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetStatus | Yes | Yes | - Return the status of Bank1 (for all devices) |
+ | | | | equivalent to FLASH_GetBank1Status function |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_WaitForLastOperation | Yes | Yes | - Wait for Bank1 last operation (for all devices) |
+ | | | | equivalent to: FLASH_WaitForLastBank1Operation function |
+ +----------------------------------------------------------------------------------------------------------------------------------+
+
+ ************************************************************************************************************************
+ * New functions used for all STM32F10x devices to manage Bank1: *
+ * - These functions are mainly useful for STM32F10x_XL density devices, to have separate control for Bank1 and bank2 *
+ * - For other devices, these functions are optional (covered by functions listed above) *
+ ************************************************************************************************************************
+ +----------------------------------------------------------------------------------------------------------------------------------+
+ | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
+ | | devices | devices | |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_UnlockBank1 | Yes | Yes | - Unlock Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_LockBank1 | Yes | Yes | - Lock Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_EraseAllBank1Pages | Yes | Yes | - Erase all pages in Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_GetBank1Status | Yes | Yes | - Return the status of Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_WaitForLastBank1Operation | Yes | Yes | - Wait for Bank1 last operation |
+ +----------------------------------------------------------------------------------------------------------------------------------+
+
+ *****************************************************************************
+ * New Functions used only with STM32F10x_XL density devices to manage Bank2 *
+ *****************************************************************************
+ +----------------------------------------------------------------------------------------------------------------------------------+
+ | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
+ | | devices | devices | |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_UnlockBank2 | Yes | No | - Unlock Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_LockBank2 | Yes | No | - Lock Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_EraseAllBank2Pages | Yes | No | - Erase all pages in Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_GetBank2Status | Yes | No | - Return the status of Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_WaitForLastBank2Operation | Yes | No | - Wait for Bank2 last operation |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_BootConfig | Yes | No | - Configure to boot from Bank1 or Bank2 |
+ +----------------------------------------------------------------------------------------------------------------------------------+
+@endcode
+*/
+
+
+/**
+ * @brief Sets the code latency value.
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_Latency: specifies the FLASH Latency value.
+ * This parameter can be one of the following values:
+ * @arg FLASH_Latency_0: FLASH Zero Latency cycle
+ * @arg FLASH_Latency_1: FLASH One Latency cycle
+ * @arg FLASH_Latency_2: FLASH Two Latency cycles
+ * @retval None
+ */
+void FLASH_SetLatency(uint32_t FLASH_Latency)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_LATENCY(FLASH_Latency));
+
+ /* Read the ACR register */
+ tmpreg = FLASH->ACR;
+
+ /* Sets the Latency value */
+ tmpreg &= ACR_LATENCY_Mask;
+ tmpreg |= FLASH_Latency;
+
+ /* Write the ACR register */
+ FLASH->ACR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the Half cycle flash access.
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_HalfCycleAccess: specifies the FLASH Half cycle Access mode.
+ * This parameter can be one of the following values:
+ * @arg FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable
+ * @arg FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable
+ * @retval None
+ */
+void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess));
+
+ /* Enable or disable the Half cycle access */
+ FLASH->ACR &= ACR_HLFCYA_Mask;
+ FLASH->ACR |= FLASH_HalfCycleAccess;
+}
+
+/**
+ * @brief Enables or disables the Prefetch Buffer.
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_PrefetchBuffer: specifies the Prefetch buffer status.
+ * This parameter can be one of the following values:
+ * @arg FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable
+ * @arg FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable
+ * @retval None
+ */
+void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer));
+
+ /* Enable or disable the Prefetch Buffer */
+ FLASH->ACR &= ACR_PRFTBE_Mask;
+ FLASH->ACR |= FLASH_PrefetchBuffer;
+}
+
+/**
+ * @brief Unlocks the FLASH Program Erase Controller.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function unlocks Bank1 and Bank2.
+ * - For all other devices it unlocks Bank1 and it is equivalent
+ * to FLASH_UnlockBank1 function..
+ * @param None
+ * @retval None
+ */
+void FLASH_Unlock(void)
+{
+ /* Authorize the FPEC of Bank1 Access */
+ FLASH->KEYR = FLASH_KEY1;
+ FLASH->KEYR = FLASH_KEY2;
+
+#ifdef STM32F10X_XL
+ /* Authorize the FPEC of Bank2 Access */
+ FLASH->KEYR2 = FLASH_KEY1;
+ FLASH->KEYR2 = FLASH_KEY2;
+#endif /* STM32F10X_XL */
+}
+/**
+ * @brief Unlocks the FLASH Bank1 Program Erase Controller.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function unlocks Bank1.
+ * - For all other devices it unlocks Bank1 and it is
+ * equivalent to FLASH_Unlock function.
+ * @param None
+ * @retval None
+ */
+void FLASH_UnlockBank1(void)
+{
+ /* Authorize the FPEC of Bank1 Access */
+ FLASH->KEYR = FLASH_KEY1;
+ FLASH->KEYR = FLASH_KEY2;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Unlocks the FLASH Bank2 Program Erase Controller.
+ * @note This function can be used only for STM32F10X_XL density devices.
+ * @param None
+ * @retval None
+ */
+void FLASH_UnlockBank2(void)
+{
+ /* Authorize the FPEC of Bank2 Access */
+ FLASH->KEYR2 = FLASH_KEY1;
+ FLASH->KEYR2 = FLASH_KEY2;
+
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Locks the FLASH Program Erase Controller.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function Locks Bank1 and Bank2.
+ * - For all other devices it Locks Bank1 and it is equivalent
+ * to FLASH_LockBank1 function.
+ * @param None
+ * @retval None
+ */
+void FLASH_Lock(void)
+{
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */
+ FLASH->CR |= CR_LOCK_Set;
+
+#ifdef STM32F10X_XL
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */
+ FLASH->CR2 |= CR_LOCK_Set;
+#endif /* STM32F10X_XL */
+}
+
+/**
+ * @brief Locks the FLASH Bank1 Program Erase Controller.
+ * @note this function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function Locks Bank1.
+ * - For all other devices it Locks Bank1 and it is equivalent
+ * to FLASH_Lock function.
+ * @param None
+ * @retval None
+ */
+void FLASH_LockBank1(void)
+{
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */
+ FLASH->CR |= CR_LOCK_Set;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Locks the FLASH Bank2 Program Erase Controller.
+ * @note This function can be used only for STM32F10X_XL density devices.
+ * @param None
+ * @retval None
+ */
+void FLASH_LockBank2(void)
+{
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */
+ FLASH->CR2 |= CR_LOCK_Set;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Erases a specified FLASH page.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Page_Address: The page address to be erased.
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ErasePage(uint32_t Page_Address)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Page_Address));
+
+#ifdef STM32F10X_XL
+ if(Page_Address < FLASH_BANK1_END_ADDRESS)
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase the page */
+ FLASH->CR|= CR_PER_Set;
+ FLASH->AR = Page_Address;
+ FLASH->CR|= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ /* Disable the PER Bit */
+ FLASH->CR &= CR_PER_Reset;
+ }
+ }
+ else
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase the page */
+ FLASH->CR2|= CR_PER_Set;
+ FLASH->AR2 = Page_Address;
+ FLASH->CR2|= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ /* Disable the PER Bit */
+ FLASH->CR2 &= CR_PER_Reset;
+ }
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase the page */
+ FLASH->CR|= CR_PER_Set;
+ FLASH->AR = Page_Address;
+ FLASH->CR|= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ /* Disable the PER Bit */
+ FLASH->CR &= CR_PER_Reset;
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Erase Status */
+ return status;
+}
+
+/**
+ * @brief Erases all FLASH pages.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseAllPages(void)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+#ifdef STM32F10X_XL
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR |= CR_MER_Set;
+ FLASH->CR |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR &= CR_MER_Reset;
+ }
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR2 |= CR_MER_Set;
+ FLASH->CR2 |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR2 &= CR_MER_Reset;
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR |= CR_MER_Set;
+ FLASH->CR |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR &= CR_MER_Reset;
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Erase Status */
+ return status;
+}
+
+/**
+ * @brief Erases all Bank1 FLASH pages.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function erases all Bank1 pages.
+ * - For all other devices it erases all Bank1 pages and it is equivalent
+ * to FLASH_EraseAllPages function.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseAllBank1Pages(void)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR |= CR_MER_Set;
+ FLASH->CR |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR &= CR_MER_Reset;
+ }
+ /* Return the Erase Status */
+ return status;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Erases all Bank2 FLASH pages.
+ * @note This function can be used only for STM32F10x_XL density devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseAllBank2Pages(void)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR2 |= CR_MER_Set;
+ FLASH->CR2 |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR2 &= CR_MER_Reset;
+ }
+ /* Return the Erase Status */
+ return status;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Erases the FLASH option bytes.
+ * @note This functions erases all option bytes except the Read protection (RDP).
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseOptionBytes(void)
+{
+ uint16_t rdptmp = RDP_Key;
+
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Get the actual read protection Option Byte value */
+ if(FLASH_GetReadOutProtectionStatus() != RESET)
+ {
+ rdptmp = 0x00;
+ }
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+
+ /* if the previous operation is completed, proceed to erase the option bytes */
+ FLASH->CR |= CR_OPTER_Set;
+ FLASH->CR |= CR_STRT_Set;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the erase operation is completed, disable the OPTER Bit */
+ FLASH->CR &= CR_OPTER_Reset;
+
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+ /* Restore the last read protection Option Byte value */
+ OB->RDP = (uint16_t)rdptmp;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ else
+ {
+ if (status != FLASH_TIMEOUT)
+ {
+ /* Disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ }
+ /* Return the erase status */
+ return status;
+}
+
+/**
+ * @brief Programs a word at a specified address.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Address: specifies the address to be programmed.
+ * @param Data: specifies the data to be programmed.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+#ifdef STM32F10X_XL
+ if(Address < FLASH_BANK1_END_ADDRESS - 2)
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ }
+ }
+ else if(Address == (FLASH_BANK1_END_ADDRESS - 1))
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ FLASH->CR2 |= CR_PG_Set;
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ }
+ else
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR2 |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ }
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Program Status */
+ return status;
+}
+
+/**
+ * @brief Programs a half word at a specified address.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Address: specifies the address to be programmed.
+ * @param Data: specifies the data to be programmed.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+#ifdef STM32F10X_XL
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(Address < FLASH_BANK1_END_ADDRESS)
+ {
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new data */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ }
+ else
+ {
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new data */
+ FLASH->CR2 |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new data */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Program Status */
+ return status;
+}
+
+/**
+ * @brief Programs a half word at a specified Option Byte Data address.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Address: specifies the address to be programmed.
+ * This parameter can be 0x1FFFF804 or 0x1FFFF806.
+ * @param Data: specifies the data to be programmed.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_OB_DATA_ADDRESS(Address));
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+ /* Enables the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+ *(__IO uint16_t*)Address = Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the Option Byte Data Program Status */
+ return status;
+}
+
+/**
+ * @brief Write protects the desired pages
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_Pages: specifies the address of the pages to be write protected.
+ * This parameter can be:
+ * @arg For @b STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31
+ * @arg For @b STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3
+ * and FLASH_WRProt_Pages124to127
+ * @arg For @b STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and
+ * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255
+ * @arg For @b STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and
+ * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127
+ * @arg For @b STM32_XL-density_devices: value between FLASH_WRProt_Pages0to1 and
+ * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to511
+ * @arg FLASH_WRProt_AllPages
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages)
+{
+ uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF;
+
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages));
+
+ FLASH_Pages = (uint32_t)(~FLASH_Pages);
+ WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask);
+ WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8);
+ WRP2_Data = (uint16_t)((FLASH_Pages & WRP2_Mask) >> 16);
+ WRP3_Data = (uint16_t)((FLASH_Pages & WRP3_Mask) >> 24);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorizes the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+ FLASH->CR |= CR_OPTPG_Set;
+ if(WRP0_Data != 0xFF)
+ {
+ OB->WRP0 = WRP0_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+ if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF))
+ {
+ OB->WRP1 = WRP1_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+ if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF))
+ {
+ OB->WRP2 = WRP2_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+
+ if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF))
+ {
+ OB->WRP3 = WRP3_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the write protection operation Status */
+ return status;
+}
+
+/**
+ * @brief Enables or disables the read out protection.
+ * @note If the user has already programmed the other option bytes before calling
+ * this function, he must re-program them since this function erases all option bytes.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Newstate: new state of the ReadOut Protection.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorizes the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+ FLASH->CR |= CR_OPTER_Set;
+ FLASH->CR |= CR_STRT_Set;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the erase operation is completed, disable the OPTER Bit */
+ FLASH->CR &= CR_OPTER_Reset;
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+ if(NewState != DISABLE)
+ {
+ OB->RDP = 0x00;
+ }
+ else
+ {
+ OB->RDP = RDP_Key;
+ }
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ else
+ {
+ if(status != FLASH_TIMEOUT)
+ {
+ /* Disable the OPTER Bit */
+ FLASH->CR &= CR_OPTER_Reset;
+ }
+ }
+ }
+ /* Return the protection operation Status */
+ return status;
+}
+
+/**
+ * @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
+ * @note This function can be used for all STM32F10x devices.
+ * @param OB_IWDG: Selects the IWDG mode
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_SW: Software IWDG selected
+ * @arg OB_IWDG_HW: Hardware IWDG selected
+ * @param OB_STOP: Reset event when entering STOP mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STOP_NoRST: No reset generated when entering in STOP
+ * @arg OB_STOP_RST: Reset generated when entering in STOP
+ * @param OB_STDBY: Reset event when entering Standby mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY
+ * @arg OB_STDBY_RST: Reset generated when entering in STANDBY
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check the parameters */
+ assert_param(IS_OB_IWDG_SOURCE(OB_IWDG));
+ assert_param(IS_OB_STOP_SOURCE(OB_STOP));
+ assert_param(IS_OB_STDBY_SOURCE(OB_STDBY));
+
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+
+ OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8)));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the Option Byte program Status */
+ return status;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Configures to boot from Bank1 or Bank2.
+ * @note This function can be used only for STM32F10x_XL density devices.
+ * @param FLASH_BOOT: select the FLASH Bank to boot from.
+ * This parameter can be one of the following values:
+ * @arg FLASH_BOOT_Bank1: At startup, if boot pins are set in boot from user Flash
+ * position and this parameter is selected the device will boot from Bank1(Default).
+ * @arg FLASH_BOOT_Bank2: At startup, if boot pins are set in boot from user Flash
+ * position and this parameter is selected the device will boot from Bank2 or Bank1,
+ * depending on the activation of the bank. The active banks are checked in
+ * the following order: Bank2, followed by Bank1.
+ * The active bank is recognized by the value programmed at the base address
+ * of the respective bank (corresponding to the initial stack pointer value
+ * in the interrupt vector table).
+ * For more information, please refer to AN2606 from www.st.com.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ assert_param(IS_FLASH_BOOT(FLASH_BOOT));
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+
+ if(FLASH_BOOT == FLASH_BOOT_Bank1)
+ {
+ OB->USER |= OB_USER_BFB2;
+ }
+ else
+ {
+ OB->USER &= (uint16_t)(~(uint16_t)(OB_USER_BFB2));
+ }
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the Option Byte program Status */
+ return status;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Returns the FLASH User Option Bytes values.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1)
+ * and RST_STDBY(Bit2).
+ */
+uint32_t FLASH_GetUserOptionByte(void)
+{
+ /* Return the User Option Byte */
+ return (uint32_t)(FLASH->OBR >> 2);
+}
+
+/**
+ * @brief Returns the FLASH Write Protection Option Bytes Register value.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval The FLASH Write Protection Option Bytes Register value
+ */
+uint32_t FLASH_GetWriteProtectionOptionByte(void)
+{
+ /* Return the Flash write protection Register value */
+ return (uint32_t)(FLASH->WRPR);
+}
+
+/**
+ * @brief Checks whether the FLASH Read Out Protection Status is set or not.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH ReadOut Protection Status(SET or RESET)
+ */
+FlagStatus FLASH_GetReadOutProtectionStatus(void)
+{
+ FlagStatus readoutstatus = RESET;
+ if ((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET)
+ {
+ readoutstatus = SET;
+ }
+ else
+ {
+ readoutstatus = RESET;
+ }
+ return readoutstatus;
+}
+
+/**
+ * @brief Checks whether the FLASH Prefetch Buffer status is set or not.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH Prefetch Buffer Status (SET or RESET).
+ */
+FlagStatus FLASH_GetPrefetchBufferStatus(void)
+{
+ FlagStatus bitstatus = RESET;
+
+ if ((FLASH->ACR & ACR_PRFTBS_Mask) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */
+ return bitstatus;
+}
+
+/**
+ * @brief Enables or disables the specified FLASH interrupts.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices, enables or disables the specified FLASH interrupts
+ for Bank1 and Bank2.
+ * - For other devices it enables or disables the specified FLASH interrupts for Bank1.
+ * @param FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_ERROR: FLASH Error Interrupt
+ * @arg FLASH_IT_EOP: FLASH end of operation Interrupt
+ * @param NewState: new state of the specified Flash interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState)
+{
+#ifdef STM32F10X_XL
+ /* Check the parameters */
+ assert_param(IS_FLASH_IT(FLASH_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if((FLASH_IT & 0x80000000) != 0x0)
+ {
+ if(NewState != DISABLE)
+ {
+ /* Enable the interrupt sources */
+ FLASH->CR2 |= (FLASH_IT & 0x7FFFFFFF);
+ }
+ else
+ {
+ /* Disable the interrupt sources */
+ FLASH->CR2 &= ~(uint32_t)(FLASH_IT & 0x7FFFFFFF);
+ }
+ }
+ else
+ {
+ if(NewState != DISABLE)
+ {
+ /* Enable the interrupt sources */
+ FLASH->CR |= FLASH_IT;
+ }
+ else
+ {
+ /* Disable the interrupt sources */
+ FLASH->CR &= ~(uint32_t)FLASH_IT;
+ }
+ }
+#else
+ /* Check the parameters */
+ assert_param(IS_FLASH_IT(FLASH_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if(NewState != DISABLE)
+ {
+ /* Enable the interrupt sources */
+ FLASH->CR |= FLASH_IT;
+ }
+ else
+ {
+ /* Disable the interrupt sources */
+ FLASH->CR &= ~(uint32_t)FLASH_IT;
+ }
+#endif /* STM32F10X_XL */
+}
+
+/**
+ * @brief Checks whether the specified FLASH flag is set or not.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices, this function checks whether the specified
+ * Bank1 or Bank2 flag is set or not.
+ * - For other devices, it checks whether the specified Bank1 flag is
+ * set or not.
+ * @param FLASH_FLAG: specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_BSY: FLASH Busy flag
+ * @arg FLASH_FLAG_PGERR: FLASH Program error flag
+ * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_EOP: FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPTERR: FLASH Option Byte error flag
+ * @retval The new state of FLASH_FLAG (SET or RESET).
+ */
+FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+
+#ifdef STM32F10X_XL
+ /* Check the parameters */
+ assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
+ if(FLASH_FLAG == FLASH_FLAG_OPTERR)
+ {
+ if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ else
+ {
+ if((FLASH_FLAG & 0x80000000) != 0x0)
+ {
+ if((FLASH->SR2 & FLASH_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ }
+#else
+ /* Check the parameters */
+ assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
+ if(FLASH_FLAG == FLASH_FLAG_OPTERR)
+ {
+ if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the new state of FLASH_FLAG (SET or RESET) */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the FLASH's pending flags.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices, this function clears Bank1 or Bank2s pending flags
+ * - For other devices, it clears Bank1s pending flags.
+ * @param FLASH_FLAG: specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_PGERR: FLASH Program error flag
+ * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_EOP: FLASH End of Operation flag
+ * @retval None
+ */
+void FLASH_ClearFlag(uint32_t FLASH_FLAG)
+{
+#ifdef STM32F10X_XL
+ /* Check the parameters */
+ assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;
+
+ if((FLASH_FLAG & 0x80000000) != 0x0)
+ {
+ /* Clear the flags */
+ FLASH->SR2 = FLASH_FLAG;
+ }
+ else
+ {
+ /* Clear the flags */
+ FLASH->SR = FLASH_FLAG;
+ }
+
+#else
+ /* Check the parameters */
+ assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;
+
+ /* Clear the flags */
+ FLASH->SR = FLASH_FLAG;
+#endif /* STM32F10X_XL */
+}
+
+/**
+ * @brief Returns the FLASH Status.
+ * @note This function can be used for all STM32F10x devices, it is equivalent
+ * to FLASH_GetBank1Status function.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP or FLASH_COMPLETE
+ */
+FLASH_Status FLASH_GetStatus(void)
+{
+ FLASH_Status flashstatus = FLASH_COMPLETE;
+
+ if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY)
+ {
+ flashstatus = FLASH_BUSY;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_PGERR) != 0)
+ {
+ flashstatus = FLASH_ERROR_PG;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_WRPRTERR) != 0 )
+ {
+ flashstatus = FLASH_ERROR_WRP;
+ }
+ else
+ {
+ flashstatus = FLASH_COMPLETE;
+ }
+ }
+ }
+ /* Return the Flash Status */
+ return flashstatus;
+}
+
+/**
+ * @brief Returns the FLASH Bank1 Status.
+ * @note This function can be used for all STM32F10x devices, it is equivalent
+ * to FLASH_GetStatus function.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP or FLASH_COMPLETE
+ */
+FLASH_Status FLASH_GetBank1Status(void)
+{
+ FLASH_Status flashstatus = FLASH_COMPLETE;
+
+ if((FLASH->SR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY)
+ {
+ flashstatus = FLASH_BUSY;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_BANK1_PGERR) != 0)
+ {
+ flashstatus = FLASH_ERROR_PG;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_BANK1_WRPRTERR) != 0 )
+ {
+ flashstatus = FLASH_ERROR_WRP;
+ }
+ else
+ {
+ flashstatus = FLASH_COMPLETE;
+ }
+ }
+ }
+ /* Return the Flash Status */
+ return flashstatus;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Returns the FLASH Bank2 Status.
+ * @note This function can be used for STM32F10x_XL density devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP or FLASH_COMPLETE
+ */
+FLASH_Status FLASH_GetBank2Status(void)
+{
+ FLASH_Status flashstatus = FLASH_COMPLETE;
+
+ if((FLASH->SR2 & (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF))
+ {
+ flashstatus = FLASH_BUSY;
+ }
+ else
+ {
+ if((FLASH->SR2 & (FLASH_FLAG_BANK2_PGERR & 0x7FFFFFFF)) != 0)
+ {
+ flashstatus = FLASH_ERROR_PG;
+ }
+ else
+ {
+ if((FLASH->SR2 & (FLASH_FLAG_BANK2_WRPRTERR & 0x7FFFFFFF)) != 0 )
+ {
+ flashstatus = FLASH_ERROR_WRP;
+ }
+ else
+ {
+ flashstatus = FLASH_COMPLETE;
+ }
+ }
+ }
+ /* Return the Flash Status */
+ return flashstatus;
+}
+#endif /* STM32F10X_XL */
+/**
+ * @brief Waits for a Flash operation to complete or a TIMEOUT to occur.
+ * @note This function can be used for all STM32F10x devices,
+ * it is equivalent to FLASH_WaitForLastBank1Operation.
+ * - For STM32F10X_XL devices this function waits for a Bank1 Flash operation
+ * to complete or a TIMEOUT to occur.
+ * - For all other devices it waits for a Flash operation to complete
+ * or a TIMEOUT to occur.
+ * @param Timeout: FLASH programming Timeout
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check for the Flash Status */
+ status = FLASH_GetBank1Status();
+ /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+ while((status == FLASH_BUSY) && (Timeout != 0x00))
+ {
+ status = FLASH_GetBank1Status();
+ Timeout--;
+ }
+ if(Timeout == 0x00 )
+ {
+ status = FLASH_TIMEOUT;
+ }
+ /* Return the operation status */
+ return status;
+}
+
+/**
+ * @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur.
+ * @note This function can be used for all STM32F10x devices,
+ * it is equivalent to FLASH_WaitForLastOperation.
+ * @param Timeout: FLASH programming Timeout
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check for the Flash Status */
+ status = FLASH_GetBank1Status();
+ /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+ while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00))
+ {
+ status = FLASH_GetBank1Status();
+ Timeout--;
+ }
+ if(Timeout == 0x00 )
+ {
+ status = FLASH_TIMEOUT;
+ }
+ /* Return the operation status */
+ return status;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur.
+ * @note This function can be used only for STM32F10x_XL density devices.
+ * @param Timeout: FLASH programming Timeout
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check for the Flash Status */
+ status = FLASH_GetBank2Status();
+ /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+ while((status == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) && (Timeout != 0x00))
+ {
+ status = FLASH_GetBank2Status();
+ Timeout--;
+ }
+ if(Timeout == 0x00 )
+ {
+ status = FLASH_TIMEOUT;
+ }
+ /* Return the operation status */
+ return status;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_fsmc.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_fsmc.c
new file mode 100644
index 0000000..c75137c
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_fsmc.c
@@ -0,0 +1,866 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_fsmc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the FSMC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_fsmc.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup FSMC
+ * @brief FSMC driver modules
+ * @{
+ */
+
+/** @defgroup FSMC_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Private_Defines
+ * @{
+ */
+
+/* --------------------- FSMC registers bit mask ---------------------------- */
+
+/* FSMC BCRx Mask */
+#define BCR_MBKEN_Set ((uint32_t)0x00000001)
+#define BCR_MBKEN_Reset ((uint32_t)0x000FFFFE)
+#define BCR_FACCEN_Set ((uint32_t)0x00000040)
+
+/* FSMC PCRx Mask */
+#define PCR_PBKEN_Set ((uint32_t)0x00000004)
+#define PCR_PBKEN_Reset ((uint32_t)0x000FFFFB)
+#define PCR_ECCEN_Set ((uint32_t)0x00000040)
+#define PCR_ECCEN_Reset ((uint32_t)0x000FFFBF)
+#define PCR_MemoryType_NAND ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the FSMC NOR/SRAM Banks registers to their default
+ * reset values.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1
+ * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2
+ * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3
+ * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4
+ * @retval None
+ */
+void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank)
+{
+ /* Check the parameter */
+ assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank));
+
+ /* FSMC_Bank1_NORSRAM1 */
+ if(FSMC_Bank == FSMC_Bank1_NORSRAM1)
+ {
+ FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030DB;
+ }
+ /* FSMC_Bank1_NORSRAM2, FSMC_Bank1_NORSRAM3 or FSMC_Bank1_NORSRAM4 */
+ else
+ {
+ FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030D2;
+ }
+ FSMC_Bank1->BTCR[FSMC_Bank + 1] = 0x0FFFFFFF;
+ FSMC_Bank1E->BWTR[FSMC_Bank] = 0x0FFFFFFF;
+}
+
+/**
+ * @brief Deinitializes the FSMC NAND Banks registers to their default reset values.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @retval None
+ */
+void FSMC_NANDDeInit(uint32_t FSMC_Bank)
+{
+ /* Check the parameter */
+ assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ /* Set the FSMC_Bank2 registers to their reset values */
+ FSMC_Bank2->PCR2 = 0x00000018;
+ FSMC_Bank2->SR2 = 0x00000040;
+ FSMC_Bank2->PMEM2 = 0xFCFCFCFC;
+ FSMC_Bank2->PATT2 = 0xFCFCFCFC;
+ }
+ /* FSMC_Bank3_NAND */
+ else
+ {
+ /* Set the FSMC_Bank3 registers to their reset values */
+ FSMC_Bank3->PCR3 = 0x00000018;
+ FSMC_Bank3->SR3 = 0x00000040;
+ FSMC_Bank3->PMEM3 = 0xFCFCFCFC;
+ FSMC_Bank3->PATT3 = 0xFCFCFCFC;
+ }
+}
+
+/**
+ * @brief Deinitializes the FSMC PCCARD Bank registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void FSMC_PCCARDDeInit(void)
+{
+ /* Set the FSMC_Bank4 registers to their reset values */
+ FSMC_Bank4->PCR4 = 0x00000018;
+ FSMC_Bank4->SR4 = 0x00000000;
+ FSMC_Bank4->PMEM4 = 0xFCFCFCFC;
+ FSMC_Bank4->PATT4 = 0xFCFCFCFC;
+ FSMC_Bank4->PIO4 = 0xFCFCFCFC;
+}
+
+/**
+ * @brief Initializes the FSMC NOR/SRAM Banks according to the specified
+ * parameters in the FSMC_NORSRAMInitStruct.
+ * @param FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef
+ * structure that contains the configuration information for
+ * the FSMC NOR/SRAM specified Banks.
+ * @retval None
+ */
+void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_BANK(FSMC_NORSRAMInitStruct->FSMC_Bank));
+ assert_param(IS_FSMC_MUX(FSMC_NORSRAMInitStruct->FSMC_DataAddressMux));
+ assert_param(IS_FSMC_MEMORY(FSMC_NORSRAMInitStruct->FSMC_MemoryType));
+ assert_param(IS_FSMC_MEMORY_WIDTH(FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth));
+ assert_param(IS_FSMC_BURSTMODE(FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode));
+ assert_param(IS_FSMC_ASYNWAIT(FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait));
+ assert_param(IS_FSMC_WAIT_POLARITY(FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity));
+ assert_param(IS_FSMC_WRAP_MODE(FSMC_NORSRAMInitStruct->FSMC_WrapMode));
+ assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive));
+ assert_param(IS_FSMC_WRITE_OPERATION(FSMC_NORSRAMInitStruct->FSMC_WriteOperation));
+ assert_param(IS_FSMC_WAITE_SIGNAL(FSMC_NORSRAMInitStruct->FSMC_WaitSignal));
+ assert_param(IS_FSMC_EXTENDED_MODE(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode));
+ assert_param(IS_FSMC_WRITE_BURST(FSMC_NORSRAMInitStruct->FSMC_WriteBurst));
+ assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime));
+ assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime));
+ assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime));
+ assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration));
+ assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision));
+ assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency));
+ assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode));
+
+ /* Bank1 NOR/SRAM control register configuration */
+ FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] =
+ (uint32_t)FSMC_NORSRAMInitStruct->FSMC_DataAddressMux |
+ FSMC_NORSRAMInitStruct->FSMC_MemoryType |
+ FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth |
+ FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode |
+ FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait |
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity |
+ FSMC_NORSRAMInitStruct->FSMC_WrapMode |
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive |
+ FSMC_NORSRAMInitStruct->FSMC_WriteOperation |
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignal |
+ FSMC_NORSRAMInitStruct->FSMC_ExtendedMode |
+ FSMC_NORSRAMInitStruct->FSMC_WriteBurst;
+
+ if(FSMC_NORSRAMInitStruct->FSMC_MemoryType == FSMC_MemoryType_NOR)
+ {
+ FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] |= (uint32_t)BCR_FACCEN_Set;
+ }
+
+ /* Bank1 NOR/SRAM timing register configuration */
+ FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank+1] =
+ (uint32_t)FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime |
+ (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime << 4) |
+ (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime << 8) |
+ (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration << 16) |
+ (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision << 20) |
+ (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency << 24) |
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode;
+
+
+ /* Bank1 NOR/SRAM timing register for write configuration, if extended mode is used */
+ if(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode == FSMC_ExtendedMode_Enable)
+ {
+ assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime));
+ assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime));
+ assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime));
+ assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision));
+ assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency));
+ assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode));
+ FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] =
+ (uint32_t)FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime |
+ (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime << 4 )|
+ (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime << 8) |
+ (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision << 20) |
+ (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency << 24) |
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode;
+ }
+ else
+ {
+ FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 0x0FFFFFFF;
+ }
+}
+
+/**
+ * @brief Initializes the FSMC NAND Banks according to the specified
+ * parameters in the FSMC_NANDInitStruct.
+ * @param FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef
+ * structure that contains the configuration information for the FSMC
+ * NAND specified Banks.
+ * @retval None
+ */
+void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
+{
+ uint32_t tmppcr = 0x00000000, tmppmem = 0x00000000, tmppatt = 0x00000000;
+
+ /* Check the parameters */
+ assert_param( IS_FSMC_NAND_BANK(FSMC_NANDInitStruct->FSMC_Bank));
+ assert_param( IS_FSMC_WAIT_FEATURE(FSMC_NANDInitStruct->FSMC_Waitfeature));
+ assert_param( IS_FSMC_MEMORY_WIDTH(FSMC_NANDInitStruct->FSMC_MemoryDataWidth));
+ assert_param( IS_FSMC_ECC_STATE(FSMC_NANDInitStruct->FSMC_ECC));
+ assert_param( IS_FSMC_ECCPAGE_SIZE(FSMC_NANDInitStruct->FSMC_ECCPageSize));
+ assert_param( IS_FSMC_TCLR_TIME(FSMC_NANDInitStruct->FSMC_TCLRSetupTime));
+ assert_param( IS_FSMC_TAR_TIME(FSMC_NANDInitStruct->FSMC_TARSetupTime));
+ assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime));
+ assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime));
+
+ /* Set the tmppcr value according to FSMC_NANDInitStruct parameters */
+ tmppcr = (uint32_t)FSMC_NANDInitStruct->FSMC_Waitfeature |
+ PCR_MemoryType_NAND |
+ FSMC_NANDInitStruct->FSMC_MemoryDataWidth |
+ FSMC_NANDInitStruct->FSMC_ECC |
+ FSMC_NANDInitStruct->FSMC_ECCPageSize |
+ (FSMC_NANDInitStruct->FSMC_TCLRSetupTime << 9 )|
+ (FSMC_NANDInitStruct->FSMC_TARSetupTime << 13);
+
+ /* Set tmppmem value according to FSMC_CommonSpaceTimingStructure parameters */
+ tmppmem = (uint32_t)FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime |
+ (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+ (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+ (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+
+ /* Set tmppatt value according to FSMC_AttributeSpaceTimingStructure parameters */
+ tmppatt = (uint32_t)FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime |
+ (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+ (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+ (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+
+ if(FSMC_NANDInitStruct->FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ /* FSMC_Bank2_NAND registers configuration */
+ FSMC_Bank2->PCR2 = tmppcr;
+ FSMC_Bank2->PMEM2 = tmppmem;
+ FSMC_Bank2->PATT2 = tmppatt;
+ }
+ else
+ {
+ /* FSMC_Bank3_NAND registers configuration */
+ FSMC_Bank3->PCR3 = tmppcr;
+ FSMC_Bank3->PMEM3 = tmppmem;
+ FSMC_Bank3->PATT3 = tmppatt;
+ }
+}
+
+/**
+ * @brief Initializes the FSMC PCCARD Bank according to the specified
+ * parameters in the FSMC_PCCARDInitStruct.
+ * @param FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef
+ * structure that contains the configuration information for the FSMC
+ * PCCARD Bank.
+ * @retval None
+ */
+void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_WAIT_FEATURE(FSMC_PCCARDInitStruct->FSMC_Waitfeature));
+ assert_param(IS_FSMC_TCLR_TIME(FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime));
+ assert_param(IS_FSMC_TAR_TIME(FSMC_PCCARDInitStruct->FSMC_TARSetupTime));
+
+ assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime));
+
+ assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime));
+ assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime));
+
+ /* Set the PCR4 register value according to FSMC_PCCARDInitStruct parameters */
+ FSMC_Bank4->PCR4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_Waitfeature |
+ FSMC_MemoryDataWidth_16b |
+ (FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime << 9) |
+ (FSMC_PCCARDInitStruct->FSMC_TARSetupTime << 13);
+
+ /* Set PMEM4 register value according to FSMC_CommonSpaceTimingStructure parameters */
+ FSMC_Bank4->PMEM4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime |
+ (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+ (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+ (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+
+ /* Set PATT4 register value according to FSMC_AttributeSpaceTimingStructure parameters */
+ FSMC_Bank4->PATT4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime |
+ (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+ (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+ (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+
+ /* Set PIO4 register value according to FSMC_IOSpaceTimingStructure parameters */
+ FSMC_Bank4->PIO4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime |
+ (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+ (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+ (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+}
+
+/**
+ * @brief Fills each FSMC_NORSRAMInitStruct member with its default value.
+ * @param FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
+{
+ /* Reset NOR/SRAM Init structure parameters values */
+ FSMC_NORSRAMInitStruct->FSMC_Bank = FSMC_Bank1_NORSRAM1;
+ FSMC_NORSRAMInitStruct->FSMC_DataAddressMux = FSMC_DataAddressMux_Enable;
+ FSMC_NORSRAMInitStruct->FSMC_MemoryType = FSMC_MemoryType_SRAM;
+ FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b;
+ FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
+ FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
+ FSMC_NORSRAMInitStruct->FSMC_WrapMode = FSMC_WrapMode_Disable;
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
+ FSMC_NORSRAMInitStruct->FSMC_WriteOperation = FSMC_WriteOperation_Enable;
+ FSMC_NORSRAMInitStruct->FSMC_WaitSignal = FSMC_WaitSignal_Enable;
+ FSMC_NORSRAMInitStruct->FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
+ FSMC_NORSRAMInitStruct->FSMC_WriteBurst = FSMC_WriteBurst_Disable;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime = 0xFF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime = 0xFF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency = 0xF;
+ FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A;
+}
+
+/**
+ * @brief Fills each FSMC_NANDInitStruct member with its default value.
+ * @param FSMC_NANDInitStruct: pointer to a FSMC_NANDInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
+{
+ /* Reset NAND Init structure parameters values */
+ FSMC_NANDInitStruct->FSMC_Bank = FSMC_Bank2_NAND;
+ FSMC_NANDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable;
+ FSMC_NANDInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b;
+ FSMC_NANDInitStruct->FSMC_ECC = FSMC_ECC_Disable;
+ FSMC_NANDInitStruct->FSMC_ECCPageSize = FSMC_ECCPageSize_256Bytes;
+ FSMC_NANDInitStruct->FSMC_TCLRSetupTime = 0x0;
+ FSMC_NANDInitStruct->FSMC_TARSetupTime = 0x0;
+ FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+ FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+}
+
+/**
+ * @brief Fills each FSMC_PCCARDInitStruct member with its default value.
+ * @param FSMC_PCCARDInitStruct: pointer to a FSMC_PCCARDInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
+{
+ /* Reset PCCARD Init structure parameters values */
+ FSMC_PCCARDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable;
+ FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime = 0x0;
+ FSMC_PCCARDInitStruct->FSMC_TARSetupTime = 0x0;
+ FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+ FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+}
+
+/**
+ * @brief Enables or disables the specified NOR/SRAM Memory Bank.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1
+ * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2
+ * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3
+ * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4
+ * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState)
+{
+ assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected NOR/SRAM Bank by setting the PBKEN bit in the BCRx register */
+ FSMC_Bank1->BTCR[FSMC_Bank] |= BCR_MBKEN_Set;
+ }
+ else
+ {
+ /* Disable the selected NOR/SRAM Bank by clearing the PBKEN bit in the BCRx register */
+ FSMC_Bank1->BTCR[FSMC_Bank] &= BCR_MBKEN_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified NAND Memory Bank.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState)
+{
+ assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected NAND Bank by setting the PBKEN bit in the PCRx register */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->PCR2 |= PCR_PBKEN_Set;
+ }
+ else
+ {
+ FSMC_Bank3->PCR3 |= PCR_PBKEN_Set;
+ }
+ }
+ else
+ {
+ /* Disable the selected NAND Bank by clearing the PBKEN bit in the PCRx register */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->PCR2 &= PCR_PBKEN_Reset;
+ }
+ else
+ {
+ FSMC_Bank3->PCR3 &= PCR_PBKEN_Reset;
+ }
+ }
+}
+
+/**
+ * @brief Enables or disables the PCCARD Memory Bank.
+ * @param NewState: new state of the PCCARD Memory Bank.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FSMC_PCCARDCmd(FunctionalState NewState)
+{
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the PCCARD Bank by setting the PBKEN bit in the PCR4 register */
+ FSMC_Bank4->PCR4 |= PCR_PBKEN_Set;
+ }
+ else
+ {
+ /* Disable the PCCARD Bank by clearing the PBKEN bit in the PCR4 register */
+ FSMC_Bank4->PCR4 &= PCR_PBKEN_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the FSMC NAND ECC feature.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @param NewState: new state of the FSMC NAND ECC feature.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState)
+{
+ assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected NAND Bank ECC function by setting the ECCEN bit in the PCRx register */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->PCR2 |= PCR_ECCEN_Set;
+ }
+ else
+ {
+ FSMC_Bank3->PCR3 |= PCR_ECCEN_Set;
+ }
+ }
+ else
+ {
+ /* Disable the selected NAND Bank ECC function by clearing the ECCEN bit in the PCRx register */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->PCR2 &= PCR_ECCEN_Reset;
+ }
+ else
+ {
+ FSMC_Bank3->PCR3 &= PCR_ECCEN_Reset;
+ }
+ }
+}
+
+/**
+ * @brief Returns the error correction code register value.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @retval The Error Correction Code (ECC) value.
+ */
+uint32_t FSMC_GetECC(uint32_t FSMC_Bank)
+{
+ uint32_t eccval = 0x00000000;
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ /* Get the ECCR2 register value */
+ eccval = FSMC_Bank2->ECCR2;
+ }
+ else
+ {
+ /* Get the ECCR3 register value */
+ eccval = FSMC_Bank3->ECCR3;
+ }
+ /* Return the error correction code value */
+ return(eccval);
+}
+
+/**
+ * @brief Enables or disables the specified FSMC interrupts.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+ * @param FSMC_IT: specifies the FSMC interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt.
+ * @arg FSMC_IT_Level: Level edge detection interrupt.
+ * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
+ * @param NewState: new state of the specified FSMC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState)
+{
+ assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
+ assert_param(IS_FSMC_IT(FSMC_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected FSMC_Bank2 interrupts */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->SR2 |= FSMC_IT;
+ }
+ /* Enable the selected FSMC_Bank3 interrupts */
+ else if (FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ FSMC_Bank3->SR3 |= FSMC_IT;
+ }
+ /* Enable the selected FSMC_Bank4 interrupts */
+ else
+ {
+ FSMC_Bank4->SR4 |= FSMC_IT;
+ }
+ }
+ else
+ {
+ /* Disable the selected FSMC_Bank2 interrupts */
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+
+ FSMC_Bank2->SR2 &= (uint32_t)~FSMC_IT;
+ }
+ /* Disable the selected FSMC_Bank3 interrupts */
+ else if (FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ FSMC_Bank3->SR3 &= (uint32_t)~FSMC_IT;
+ }
+ /* Disable the selected FSMC_Bank4 interrupts */
+ else
+ {
+ FSMC_Bank4->SR4 &= (uint32_t)~FSMC_IT;
+ }
+ }
+}
+
+/**
+ * @brief Checks whether the specified FSMC flag is set or not.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+ * @param FSMC_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag.
+ * @arg FSMC_FLAG_Level: Level detection Flag.
+ * @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag.
+ * @arg FSMC_FLAG_FEMPT: Fifo empty Flag.
+ * @retval The new state of FSMC_FLAG (SET or RESET).
+ */
+FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ uint32_t tmpsr = 0x00000000;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank));
+ assert_param(IS_FSMC_GET_FLAG(FSMC_FLAG));
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ tmpsr = FSMC_Bank2->SR2;
+ }
+ else if(FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ tmpsr = FSMC_Bank3->SR3;
+ }
+ /* FSMC_Bank4_PCCARD*/
+ else
+ {
+ tmpsr = FSMC_Bank4->SR4;
+ }
+
+ /* Get the flag status */
+ if ((tmpsr & FSMC_FLAG) != (uint16_t)RESET )
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ /* Return the flag status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the FSMC's pending flags.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+ * @param FSMC_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag.
+ * @arg FSMC_FLAG_Level: Level detection Flag.
+ * @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag.
+ * @retval None
+ */
+void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank));
+ assert_param(IS_FSMC_CLEAR_FLAG(FSMC_FLAG)) ;
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->SR2 &= ~FSMC_FLAG;
+ }
+ else if(FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ FSMC_Bank3->SR3 &= ~FSMC_FLAG;
+ }
+ /* FSMC_Bank4_PCCARD*/
+ else
+ {
+ FSMC_Bank4->SR4 &= ~FSMC_FLAG;
+ }
+}
+
+/**
+ * @brief Checks whether the specified FSMC interrupt has occurred or not.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+ * @param FSMC_IT: specifies the FSMC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt.
+ * @arg FSMC_IT_Level: Level edge detection interrupt.
+ * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
+ * @retval The new state of FSMC_IT (SET or RESET).
+ */
+ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t tmpsr = 0x0, itstatus = 0x0, itenable = 0x0;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
+ assert_param(IS_FSMC_GET_IT(FSMC_IT));
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ tmpsr = FSMC_Bank2->SR2;
+ }
+ else if(FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ tmpsr = FSMC_Bank3->SR3;
+ }
+ /* FSMC_Bank4_PCCARD*/
+ else
+ {
+ tmpsr = FSMC_Bank4->SR4;
+ }
+
+ itstatus = tmpsr & FSMC_IT;
+
+ itenable = tmpsr & (FSMC_IT >> 3);
+ if ((itstatus != (uint32_t)RESET) && (itenable != (uint32_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the FSMC's interrupt pending bits.
+ * @param FSMC_Bank: specifies the FSMC Bank to be used
+ * This parameter can be one of the following values:
+ * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND
+ * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+ * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+ * @param FSMC_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt.
+ * @arg FSMC_IT_Level: Level edge detection interrupt.
+ * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
+ * @retval None
+ */
+void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
+ assert_param(IS_FSMC_IT(FSMC_IT));
+
+ if(FSMC_Bank == FSMC_Bank2_NAND)
+ {
+ FSMC_Bank2->SR2 &= ~(FSMC_IT >> 3);
+ }
+ else if(FSMC_Bank == FSMC_Bank3_NAND)
+ {
+ FSMC_Bank3->SR3 &= ~(FSMC_IT >> 3);
+ }
+ /* FSMC_Bank4_PCCARD*/
+ else
+ {
+ FSMC_Bank4->SR4 &= ~(FSMC_IT >> 3);
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c
new file mode 100644
index 0000000..93dbcd7
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c
@@ -0,0 +1,650 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_gpio.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the GPIO firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_gpio.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup GPIO
+ * @brief GPIO driver modules
+ * @{
+ */
+
+/** @defgroup GPIO_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Private_Defines
+ * @{
+ */
+
+/* ------------ RCC registers bit address in the alias region ----------------*/
+#define AFIO_OFFSET (AFIO_BASE - PERIPH_BASE)
+
+/* --- EVENTCR Register -----*/
+
+/* Alias word address of EVOE bit */
+#define EVCR_OFFSET (AFIO_OFFSET + 0x00)
+#define EVOE_BitNumber ((uint8_t)0x07)
+#define EVCR_EVOE_BB (PERIPH_BB_BASE + (EVCR_OFFSET * 32) + (EVOE_BitNumber * 4))
+
+
+/* --- MAPR Register ---*/
+/* Alias word address of MII_RMII_SEL bit */
+#define MAPR_OFFSET (AFIO_OFFSET + 0x04)
+#define MII_RMII_SEL_BitNumber ((u8)0x17)
+#define MAPR_MII_RMII_SEL_BB (PERIPH_BB_BASE + (MAPR_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4))
+
+
+#define EVCR_PORTPINCONFIG_MASK ((uint16_t)0xFF80)
+#define LSB_MASK ((uint16_t)0xFFFF)
+#define DBGAFR_POSITION_MASK ((uint32_t)0x000F0000)
+#define DBGAFR_SWJCFG_MASK ((uint32_t)0xF0FFFFFF)
+#define DBGAFR_LOCATION_MASK ((uint32_t)0x00200000)
+#define DBGAFR_NUMBITS_MASK ((uint32_t)0x00100000)
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the GPIOx peripheral registers to their default reset values.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @retval None
+ */
+void GPIO_DeInit(GPIO_TypeDef* GPIOx)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ if (GPIOx == GPIOA)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE);
+ }
+ else if (GPIOx == GPIOB)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE);
+ }
+ else if (GPIOx == GPIOC)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE);
+ }
+ else if (GPIOx == GPIOD)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE);
+ }
+ else if (GPIOx == GPIOE)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE);
+ }
+ else if (GPIOx == GPIOF)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, DISABLE);
+ }
+ else
+ {
+ if (GPIOx == GPIOG)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Deinitializes the Alternate Functions (remap, event control
+ * and EXTI configuration) registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void GPIO_AFIODeInit(void)
+{
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE);
+}
+
+/**
+ * @brief Initializes the GPIOx peripheral according to the specified
+ * parameters in the GPIO_InitStruct.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that
+ * contains the configuration information for the specified GPIO peripheral.
+ * @retval None
+ */
+void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct)
+{
+ uint32_t currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00;
+ uint32_t tmpreg = 0x00, pinmask = 0x00;
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode));
+ assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin));
+
+/*---------------------------- GPIO Mode Configuration -----------------------*/
+ currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F);
+ if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00)
+ {
+ /* Check the parameters */
+ assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed));
+ /* Output mode */
+ currentmode |= (uint32_t)GPIO_InitStruct->GPIO_Speed;
+ }
+/*---------------------------- GPIO CRL Configuration ------------------------*/
+ /* Configure the eight low port pins */
+ if (((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00)
+ {
+ tmpreg = GPIOx->CRL;
+ for (pinpos = 0x00; pinpos < 0x08; pinpos++)
+ {
+ pos = ((uint32_t)0x01) << pinpos;
+ /* Get the port pins position */
+ currentpin = (GPIO_InitStruct->GPIO_Pin) & pos;
+ if (currentpin == pos)
+ {
+ pos = pinpos << 2;
+ /* Clear the corresponding low control register bits */
+ pinmask = ((uint32_t)0x0F) << pos;
+ tmpreg &= ~pinmask;
+ /* Write the mode configuration in the corresponding bits */
+ tmpreg |= (currentmode << pos);
+ /* Reset the corresponding ODR bit */
+ if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
+ {
+ GPIOx->BRR = (((uint32_t)0x01) << pinpos);
+ }
+ else
+ {
+ /* Set the corresponding ODR bit */
+ if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
+ {
+ GPIOx->BSRR = (((uint32_t)0x01) << pinpos);
+ }
+ }
+ }
+ }
+ GPIOx->CRL = tmpreg;
+ }
+/*---------------------------- GPIO CRH Configuration ------------------------*/
+ /* Configure the eight high port pins */
+ if (GPIO_InitStruct->GPIO_Pin > 0x00FF)
+ {
+ tmpreg = GPIOx->CRH;
+ for (pinpos = 0x00; pinpos < 0x08; pinpos++)
+ {
+ pos = (((uint32_t)0x01) << (pinpos + 0x08));
+ /* Get the port pins position */
+ currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos);
+ if (currentpin == pos)
+ {
+ pos = pinpos << 2;
+ /* Clear the corresponding high control register bits */
+ pinmask = ((uint32_t)0x0F) << pos;
+ tmpreg &= ~pinmask;
+ /* Write the mode configuration in the corresponding bits */
+ tmpreg |= (currentmode << pos);
+ /* Reset the corresponding ODR bit */
+ if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
+ {
+ GPIOx->BRR = (((uint32_t)0x01) << (pinpos + 0x08));
+ }
+ /* Set the corresponding ODR bit */
+ if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
+ {
+ GPIOx->BSRR = (((uint32_t)0x01) << (pinpos + 0x08));
+ }
+ }
+ }
+ GPIOx->CRH = tmpreg;
+ }
+}
+
+/**
+ * @brief Fills each GPIO_InitStruct member with its default value.
+ * @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct)
+{
+ /* Reset GPIO init structure parameters values */
+ GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All;
+ GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz;
+ GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING;
+}
+
+/**
+ * @brief Reads the specified input port pin.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to read.
+ * This parameter can be GPIO_Pin_x where x can be (0..15).
+ * @retval The input port pin value.
+ */
+uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ uint8_t bitstatus = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
+
+ if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET)
+ {
+ bitstatus = (uint8_t)Bit_SET;
+ }
+ else
+ {
+ bitstatus = (uint8_t)Bit_RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Reads the specified GPIO input data port.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @retval GPIO input data port value.
+ */
+uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ return ((uint16_t)GPIOx->IDR);
+}
+
+/**
+ * @brief Reads the specified output data port bit.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to read.
+ * This parameter can be GPIO_Pin_x where x can be (0..15).
+ * @retval The output port pin value.
+ */
+uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ uint8_t bitstatus = 0x00;
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
+
+ if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET)
+ {
+ bitstatus = (uint8_t)Bit_SET;
+ }
+ else
+ {
+ bitstatus = (uint8_t)Bit_RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Reads the specified GPIO output data port.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @retval GPIO output data port value.
+ */
+uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ return ((uint16_t)GPIOx->ODR);
+}
+
+/**
+ * @brief Sets the selected data port bits.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bits to be written.
+ * This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+ * @retval None
+ */
+void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ GPIOx->BSRR = GPIO_Pin;
+}
+
+/**
+ * @brief Clears the selected data port bits.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bits to be written.
+ * This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+ * @retval None
+ */
+void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ GPIOx->BRR = GPIO_Pin;
+}
+
+/**
+ * @brief Sets or clears the selected data port bit.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to be written.
+ * This parameter can be one of GPIO_Pin_x where x can be (0..15).
+ * @param BitVal: specifies the value to be written to the selected bit.
+ * This parameter can be one of the BitAction enum values:
+ * @arg Bit_RESET: to clear the port pin
+ * @arg Bit_SET: to set the port pin
+ * @retval None
+ */
+void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
+ assert_param(IS_GPIO_BIT_ACTION(BitVal));
+
+ if (BitVal != Bit_RESET)
+ {
+ GPIOx->BSRR = GPIO_Pin;
+ }
+ else
+ {
+ GPIOx->BRR = GPIO_Pin;
+ }
+}
+
+/**
+ * @brief Writes data to the specified GPIO data port.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param PortVal: specifies the value to be written to the port output data register.
+ * @retval None
+ */
+void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ GPIOx->ODR = PortVal;
+}
+
+/**
+ * @brief Locks GPIO Pins configuration registers.
+ * @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to be written.
+ * This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+ * @retval None
+ */
+void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ uint32_t tmp = 0x00010000;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ tmp |= GPIO_Pin;
+ /* Set LCKK bit */
+ GPIOx->LCKR = tmp;
+ /* Reset LCKK bit */
+ GPIOx->LCKR = GPIO_Pin;
+ /* Set LCKK bit */
+ GPIOx->LCKR = tmp;
+ /* Read LCKK bit*/
+ tmp = GPIOx->LCKR;
+ /* Read LCKK bit*/
+ tmp = GPIOx->LCKR;
+}
+
+/**
+ * @brief Selects the GPIO pin used as Event output.
+ * @param GPIO_PortSource: selects the GPIO port to be used as source
+ * for Event output.
+ * This parameter can be GPIO_PortSourceGPIOx where x can be (A..E).
+ * @param GPIO_PinSource: specifies the pin for the Event output.
+ * This parameter can be GPIO_PinSourcex where x can be (0..15).
+ * @retval None
+ */
+void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource)
+{
+ uint32_t tmpreg = 0x00;
+ /* Check the parameters */
+ assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource));
+ assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
+
+ tmpreg = AFIO->EVCR;
+ /* Clear the PORT[6:4] and PIN[3:0] bits */
+ tmpreg &= EVCR_PORTPINCONFIG_MASK;
+ tmpreg |= (uint32_t)GPIO_PortSource << 0x04;
+ tmpreg |= GPIO_PinSource;
+ AFIO->EVCR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the Event Output.
+ * @param NewState: new state of the Event output.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void GPIO_EventOutputCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) EVCR_EVOE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Changes the mapping of the specified pin.
+ * @param GPIO_Remap: selects the pin to remap.
+ * This parameter can be one of the following values:
+ * @arg GPIO_Remap_SPI1 : SPI1 Alternate Function mapping
+ * @arg GPIO_Remap_I2C1 : I2C1 Alternate Function mapping
+ * @arg GPIO_Remap_USART1 : USART1 Alternate Function mapping
+ * @arg GPIO_Remap_USART2 : USART2 Alternate Function mapping
+ * @arg GPIO_PartialRemap_USART3 : USART3 Partial Alternate Function mapping
+ * @arg GPIO_FullRemap_USART3 : USART3 Full Alternate Function mapping
+ * @arg GPIO_PartialRemap_TIM1 : TIM1 Partial Alternate Function mapping
+ * @arg GPIO_FullRemap_TIM1 : TIM1 Full Alternate Function mapping
+ * @arg GPIO_PartialRemap1_TIM2 : TIM2 Partial1 Alternate Function mapping
+ * @arg GPIO_PartialRemap2_TIM2 : TIM2 Partial2 Alternate Function mapping
+ * @arg GPIO_FullRemap_TIM2 : TIM2 Full Alternate Function mapping
+ * @arg GPIO_PartialRemap_TIM3 : TIM3 Partial Alternate Function mapping
+ * @arg GPIO_FullRemap_TIM3 : TIM3 Full Alternate Function mapping
+ * @arg GPIO_Remap_TIM4 : TIM4 Alternate Function mapping
+ * @arg GPIO_Remap1_CAN1 : CAN1 Alternate Function mapping
+ * @arg GPIO_Remap2_CAN1 : CAN1 Alternate Function mapping
+ * @arg GPIO_Remap_PD01 : PD01 Alternate Function mapping
+ * @arg GPIO_Remap_TIM5CH4_LSI : LSI connected to TIM5 Channel4 input capture for calibration
+ * @arg GPIO_Remap_ADC1_ETRGINJ : ADC1 External Trigger Injected Conversion remapping
+ * @arg GPIO_Remap_ADC1_ETRGREG : ADC1 External Trigger Regular Conversion remapping
+ * @arg GPIO_Remap_ADC2_ETRGINJ : ADC2 External Trigger Injected Conversion remapping
+ * @arg GPIO_Remap_ADC2_ETRGREG : ADC2 External Trigger Regular Conversion remapping
+ * @arg GPIO_Remap_ETH : Ethernet remapping (only for Connectivity line devices)
+ * @arg GPIO_Remap_CAN2 : CAN2 remapping (only for Connectivity line devices)
+ * @arg GPIO_Remap_SWJ_NoJTRST : Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST
+ * @arg GPIO_Remap_SWJ_JTAGDisable : JTAG-DP Disabled and SW-DP Enabled
+ * @arg GPIO_Remap_SWJ_Disable : Full SWJ Disabled (JTAG-DP + SW-DP)
+ * @arg GPIO_Remap_SPI3 : SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices)
+ * When the SPI3/I2S3 is remapped using this function, the SWJ is configured
+ * to Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST.
+ * @arg GPIO_Remap_TIM2ITR1_PTP_SOF : Ethernet PTP output or USB OTG SOF (Start of Frame) connected
+ * to TIM2 Internal Trigger 1 for calibration (only for Connectivity line devices)
+ * If the GPIO_Remap_TIM2ITR1_PTP_SOF is enabled the TIM2 ITR1 is connected to
+ * Ethernet PTP output. When Reset TIM2 ITR1 is connected to USB OTG SOF output.
+ * @arg GPIO_Remap_PTP_PPS : Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices)
+ * @arg GPIO_Remap_TIM15 : TIM15 Alternate Function mapping (only for Value line devices)
+ * @arg GPIO_Remap_TIM16 : TIM16 Alternate Function mapping (only for Value line devices)
+ * @arg GPIO_Remap_TIM17 : TIM17 Alternate Function mapping (only for Value line devices)
+ * @arg GPIO_Remap_CEC : CEC Alternate Function mapping (only for Value line devices)
+ * @arg GPIO_Remap_TIM1_DMA : TIM1 DMA requests mapping (only for Value line devices)
+ * @arg GPIO_Remap_TIM9 : TIM9 Alternate Function mapping (only for XL-density devices)
+ * @arg GPIO_Remap_TIM10 : TIM10 Alternate Function mapping (only for XL-density devices)
+ * @arg GPIO_Remap_TIM11 : TIM11 Alternate Function mapping (only for XL-density devices)
+ * @arg GPIO_Remap_TIM13 : TIM13 Alternate Function mapping (only for High density Value line and XL-density devices)
+ * @arg GPIO_Remap_TIM14 : TIM14 Alternate Function mapping (only for High density Value line and XL-density devices)
+ * @arg GPIO_Remap_FSMC_NADV : FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices)
+ * @arg GPIO_Remap_TIM67_DAC_DMA : TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices)
+ * @arg GPIO_Remap_TIM12 : TIM12 Alternate Function mapping (only for High density Value line devices)
+ * @arg GPIO_Remap_MISC : Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping,
+ * only for High density Value line devices)
+ * @param NewState: new state of the port pin remapping.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState)
+{
+ uint32_t tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_REMAP(GPIO_Remap));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if((GPIO_Remap & 0x80000000) == 0x80000000)
+ {
+ tmpreg = AFIO->MAPR2;
+ }
+ else
+ {
+ tmpreg = AFIO->MAPR;
+ }
+
+ tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10;
+ tmp = GPIO_Remap & LSB_MASK;
+
+ if ((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK))
+ {
+ tmpreg &= DBGAFR_SWJCFG_MASK;
+ AFIO->MAPR &= DBGAFR_SWJCFG_MASK;
+ }
+ else if ((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK)
+ {
+ tmp1 = ((uint32_t)0x03) << tmpmask;
+ tmpreg &= ~tmp1;
+ tmpreg |= ~DBGAFR_SWJCFG_MASK;
+ }
+ else
+ {
+ tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15)*0x10));
+ tmpreg |= ~DBGAFR_SWJCFG_MASK;
+ }
+
+ if (NewState != DISABLE)
+ {
+ tmpreg |= (tmp << ((GPIO_Remap >> 0x15)*0x10));
+ }
+
+ if((GPIO_Remap & 0x80000000) == 0x80000000)
+ {
+ AFIO->MAPR2 = tmpreg;
+ }
+ else
+ {
+ AFIO->MAPR = tmpreg;
+ }
+}
+
+/**
+ * @brief Selects the GPIO pin used as EXTI Line.
+ * @param GPIO_PortSource: selects the GPIO port to be used as source for EXTI lines.
+ * This parameter can be GPIO_PortSourceGPIOx where x can be (A..G).
+ * @param GPIO_PinSource: specifies the EXTI line to be configured.
+ * This parameter can be GPIO_PinSourcex where x can be (0..15).
+ * @retval None
+ */
+void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource)
+{
+ uint32_t tmp = 0x00;
+ /* Check the parameters */
+ assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource));
+ assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
+
+ tmp = ((uint32_t)0x0F) << (0x04 * (GPIO_PinSource & (uint8_t)0x03));
+ AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp;
+ AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((uint32_t)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (uint8_t)0x03)));
+}
+
+/**
+ * @brief Selects the Ethernet media interface.
+ * @note This function applies only to STM32 Connectivity line devices.
+ * @param GPIO_ETH_MediaInterface: specifies the Media Interface mode.
+ * This parameter can be one of the following values:
+ * @arg GPIO_ETH_MediaInterface_MII: MII mode
+ * @arg GPIO_ETH_MediaInterface_RMII: RMII mode
+ * @retval None
+ */
+void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface)
+{
+ assert_param(IS_GPIO_ETH_MEDIA_INTERFACE(GPIO_ETH_MediaInterface));
+
+ /* Configure MII_RMII selection bit */
+ *(__IO uint32_t *) MAPR_MII_RMII_SEL_BB = GPIO_ETH_MediaInterface;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c
new file mode 100644
index 0000000..8896726
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c
@@ -0,0 +1,1331 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_i2c.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the I2C firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_i2c.h"
+#include "stm32f10x_rcc.h"
+
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup I2C
+ * @brief I2C driver modules
+ * @{
+ */
+
+/** @defgroup I2C_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_Defines
+ * @{
+ */
+
+/* I2C SPE mask */
+#define CR1_PE_Set ((uint16_t)0x0001)
+#define CR1_PE_Reset ((uint16_t)0xFFFE)
+
+/* I2C START mask */
+#define CR1_START_Set ((uint16_t)0x0100)
+#define CR1_START_Reset ((uint16_t)0xFEFF)
+
+/* I2C STOP mask */
+#define CR1_STOP_Set ((uint16_t)0x0200)
+#define CR1_STOP_Reset ((uint16_t)0xFDFF)
+
+/* I2C ACK mask */
+#define CR1_ACK_Set ((uint16_t)0x0400)
+#define CR1_ACK_Reset ((uint16_t)0xFBFF)
+
+/* I2C ENGC mask */
+#define CR1_ENGC_Set ((uint16_t)0x0040)
+#define CR1_ENGC_Reset ((uint16_t)0xFFBF)
+
+/* I2C SWRST mask */
+#define CR1_SWRST_Set ((uint16_t)0x8000)
+#define CR1_SWRST_Reset ((uint16_t)0x7FFF)
+
+/* I2C PEC mask */
+#define CR1_PEC_Set ((uint16_t)0x1000)
+#define CR1_PEC_Reset ((uint16_t)0xEFFF)
+
+/* I2C ENPEC mask */
+#define CR1_ENPEC_Set ((uint16_t)0x0020)
+#define CR1_ENPEC_Reset ((uint16_t)0xFFDF)
+
+/* I2C ENARP mask */
+#define CR1_ENARP_Set ((uint16_t)0x0010)
+#define CR1_ENARP_Reset ((uint16_t)0xFFEF)
+
+/* I2C NOSTRETCH mask */
+#define CR1_NOSTRETCH_Set ((uint16_t)0x0080)
+#define CR1_NOSTRETCH_Reset ((uint16_t)0xFF7F)
+
+/* I2C registers Masks */
+#define CR1_CLEAR_Mask ((uint16_t)0xFBF5)
+
+/* I2C DMAEN mask */
+#define CR2_DMAEN_Set ((uint16_t)0x0800)
+#define CR2_DMAEN_Reset ((uint16_t)0xF7FF)
+
+/* I2C LAST mask */
+#define CR2_LAST_Set ((uint16_t)0x1000)
+#define CR2_LAST_Reset ((uint16_t)0xEFFF)
+
+/* I2C FREQ mask */
+#define CR2_FREQ_Reset ((uint16_t)0xFFC0)
+
+/* I2C ADD0 mask */
+#define OAR1_ADD0_Set ((uint16_t)0x0001)
+#define OAR1_ADD0_Reset ((uint16_t)0xFFFE)
+
+/* I2C ENDUAL mask */
+#define OAR2_ENDUAL_Set ((uint16_t)0x0001)
+#define OAR2_ENDUAL_Reset ((uint16_t)0xFFFE)
+
+/* I2C ADD2 mask */
+#define OAR2_ADD2_Reset ((uint16_t)0xFF01)
+
+/* I2C F/S mask */
+#define CCR_FS_Set ((uint16_t)0x8000)
+
+/* I2C CCR mask */
+#define CCR_CCR_Set ((uint16_t)0x0FFF)
+
+/* I2C FLAG mask */
+#define FLAG_Mask ((uint32_t)0x00FFFFFF)
+
+/* I2C Interrupt Enable mask */
+#define ITEN_Mask ((uint32_t)0x07000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the I2Cx peripheral registers to their default reset values.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @retval None
+ */
+void I2C_DeInit(I2C_TypeDef* I2Cx)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+
+ if (I2Cx == I2C1)
+ {
+ /* Enable I2C1 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, ENABLE);
+ /* Release I2C1 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, DISABLE);
+ }
+ else
+ {
+ /* Enable I2C2 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, ENABLE);
+ /* Release I2C2 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, DISABLE);
+ }
+}
+
+/**
+ * @brief Initializes the I2Cx peripheral according to the specified
+ * parameters in the I2C_InitStruct.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_InitStruct: pointer to a I2C_InitTypeDef structure that
+ * contains the configuration information for the specified I2C peripheral.
+ * @retval None
+ */
+void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct)
+{
+ uint16_t tmpreg = 0, freqrange = 0;
+ uint16_t result = 0x04;
+ uint32_t pclk1 = 8000000;
+ RCC_ClocksTypeDef rcc_clocks;
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_CLOCK_SPEED(I2C_InitStruct->I2C_ClockSpeed));
+ assert_param(IS_I2C_MODE(I2C_InitStruct->I2C_Mode));
+ assert_param(IS_I2C_DUTY_CYCLE(I2C_InitStruct->I2C_DutyCycle));
+ assert_param(IS_I2C_OWN_ADDRESS1(I2C_InitStruct->I2C_OwnAddress1));
+ assert_param(IS_I2C_ACK_STATE(I2C_InitStruct->I2C_Ack));
+ assert_param(IS_I2C_ACKNOWLEDGE_ADDRESS(I2C_InitStruct->I2C_AcknowledgedAddress));
+
+/*---------------------------- I2Cx CR2 Configuration ------------------------*/
+ /* Get the I2Cx CR2 value */
+ tmpreg = I2Cx->CR2;
+ /* Clear frequency FREQ[5:0] bits */
+ tmpreg &= CR2_FREQ_Reset;
+ /* Get pclk1 frequency value */
+ RCC_GetClocksFreq(&rcc_clocks);
+ pclk1 = rcc_clocks.PCLK1_Frequency;
+ /* Set frequency bits depending on pclk1 value */
+ freqrange = (uint16_t)(pclk1 / 1000000);
+ tmpreg |= freqrange;
+ /* Write to I2Cx CR2 */
+ I2Cx->CR2 = tmpreg;
+
+/*---------------------------- I2Cx CCR Configuration ------------------------*/
+ /* Disable the selected I2C peripheral to configure TRISE */
+ I2Cx->CR1 &= CR1_PE_Reset;
+ /* Reset tmpreg value */
+ /* Clear F/S, DUTY and CCR[11:0] bits */
+ tmpreg = 0;
+
+ /* Configure speed in standard mode */
+ if (I2C_InitStruct->I2C_ClockSpeed <= 100000)
+ {
+ /* Standard mode speed calculate */
+ result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed << 1));
+ /* Test if CCR value is under 0x4*/
+ if (result < 0x04)
+ {
+ /* Set minimum allowed value */
+ result = 0x04;
+ }
+ /* Set speed value for standard mode */
+ tmpreg |= result;
+ /* Set Maximum Rise Time for standard mode */
+ I2Cx->TRISE = freqrange + 1;
+ }
+ /* Configure speed in fast mode */
+ else /*(I2C_InitStruct->I2C_ClockSpeed <= 400000)*/
+ {
+ if (I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_2)
+ {
+ /* Fast mode speed calculate: Tlow/Thigh = 2 */
+ result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 3));
+ }
+ else /*I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_16_9*/
+ {
+ /* Fast mode speed calculate: Tlow/Thigh = 16/9 */
+ result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 25));
+ /* Set DUTY bit */
+ result |= I2C_DutyCycle_16_9;
+ }
+
+ /* Test if CCR value is under 0x1*/
+ if ((result & CCR_CCR_Set) == 0)
+ {
+ /* Set minimum allowed value */
+ result |= (uint16_t)0x0001;
+ }
+ /* Set speed value and set F/S bit for fast mode */
+ tmpreg |= (uint16_t)(result | CCR_FS_Set);
+ /* Set Maximum Rise Time for fast mode */
+ I2Cx->TRISE = (uint16_t)(((freqrange * (uint16_t)300) / (uint16_t)1000) + (uint16_t)1);
+ }
+
+ /* Write to I2Cx CCR */
+ I2Cx->CCR = tmpreg;
+ /* Enable the selected I2C peripheral */
+ I2Cx->CR1 |= CR1_PE_Set;
+
+/*---------------------------- I2Cx CR1 Configuration ------------------------*/
+ /* Get the I2Cx CR1 value */
+ tmpreg = I2Cx->CR1;
+ /* Clear ACK, SMBTYPE and SMBUS bits */
+ tmpreg &= CR1_CLEAR_Mask;
+ /* Configure I2Cx: mode and acknowledgement */
+ /* Set SMBTYPE and SMBUS bits according to I2C_Mode value */
+ /* Set ACK bit according to I2C_Ack value */
+ tmpreg |= (uint16_t)((uint32_t)I2C_InitStruct->I2C_Mode | I2C_InitStruct->I2C_Ack);
+ /* Write to I2Cx CR1 */
+ I2Cx->CR1 = tmpreg;
+
+/*---------------------------- I2Cx OAR1 Configuration -----------------------*/
+ /* Set I2Cx Own Address1 and acknowledged address */
+ I2Cx->OAR1 = (I2C_InitStruct->I2C_AcknowledgedAddress | I2C_InitStruct->I2C_OwnAddress1);
+}
+
+/**
+ * @brief Fills each I2C_InitStruct member with its default value.
+ * @param I2C_InitStruct: pointer to an I2C_InitTypeDef structure which will be initialized.
+ * @retval None
+ */
+void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct)
+{
+/*---------------- Reset I2C init structure parameters values ----------------*/
+ /* initialize the I2C_ClockSpeed member */
+ I2C_InitStruct->I2C_ClockSpeed = 5000;
+ /* Initialize the I2C_Mode member */
+ I2C_InitStruct->I2C_Mode = I2C_Mode_I2C;
+ /* Initialize the I2C_DutyCycle member */
+ I2C_InitStruct->I2C_DutyCycle = I2C_DutyCycle_2;
+ /* Initialize the I2C_OwnAddress1 member */
+ I2C_InitStruct->I2C_OwnAddress1 = 0;
+ /* Initialize the I2C_Ack member */
+ I2C_InitStruct->I2C_Ack = I2C_Ack_Disable;
+ /* Initialize the I2C_AcknowledgedAddress member */
+ I2C_InitStruct->I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
+}
+
+/**
+ * @brief Enables or disables the specified I2C peripheral.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2Cx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C peripheral */
+ I2Cx->CR1 |= CR1_PE_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C peripheral */
+ I2Cx->CR1 &= CR1_PE_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C DMA requests.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C DMA transfer.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C DMA requests */
+ I2Cx->CR2 |= CR2_DMAEN_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C DMA requests */
+ I2Cx->CR2 &= CR2_DMAEN_Reset;
+ }
+}
+
+/**
+ * @brief Specifies if the next DMA transfer will be the last one.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C DMA last transfer.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Next DMA transfer is the last transfer */
+ I2Cx->CR2 |= CR2_LAST_Set;
+ }
+ else
+ {
+ /* Next DMA transfer is not the last transfer */
+ I2Cx->CR2 &= CR2_LAST_Reset;
+ }
+}
+
+/**
+ * @brief Generates I2Cx communication START condition.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C START condition generation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None.
+ */
+void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Generate a START condition */
+ I2Cx->CR1 |= CR1_START_Set;
+ }
+ else
+ {
+ /* Disable the START condition generation */
+ I2Cx->CR1 &= CR1_START_Reset;
+ }
+}
+
+/**
+ * @brief Generates I2Cx communication STOP condition.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C STOP condition generation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None.
+ */
+void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Generate a STOP condition */
+ I2Cx->CR1 |= CR1_STOP_Set;
+ }
+ else
+ {
+ /* Disable the STOP condition generation */
+ I2Cx->CR1 &= CR1_STOP_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C acknowledge feature.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C Acknowledgement.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None.
+ */
+void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the acknowledgement */
+ I2Cx->CR1 |= CR1_ACK_Set;
+ }
+ else
+ {
+ /* Disable the acknowledgement */
+ I2Cx->CR1 &= CR1_ACK_Reset;
+ }
+}
+
+/**
+ * @brief Configures the specified I2C own address2.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param Address: specifies the 7bit I2C own address2.
+ * @retval None.
+ */
+void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address)
+{
+ uint16_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+
+ /* Get the old register value */
+ tmpreg = I2Cx->OAR2;
+
+ /* Reset I2Cx Own address2 bit [7:1] */
+ tmpreg &= OAR2_ADD2_Reset;
+
+ /* Set I2Cx Own address2 */
+ tmpreg |= (uint16_t)((uint16_t)Address & (uint16_t)0x00FE);
+
+ /* Store the new register value */
+ I2Cx->OAR2 = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the specified I2C dual addressing mode.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C dual addressing mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable dual addressing mode */
+ I2Cx->OAR2 |= OAR2_ENDUAL_Set;
+ }
+ else
+ {
+ /* Disable dual addressing mode */
+ I2Cx->OAR2 &= OAR2_ENDUAL_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C general call feature.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C General call.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable generall call */
+ I2Cx->CR1 |= CR1_ENGC_Set;
+ }
+ else
+ {
+ /* Disable generall call */
+ I2Cx->CR1 &= CR1_ENGC_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C interrupts.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_IT: specifies the I2C interrupts sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_IT_BUF: Buffer interrupt mask
+ * @arg I2C_IT_EVT: Event interrupt mask
+ * @arg I2C_IT_ERR: Error interrupt mask
+ * @param NewState: new state of the specified I2C interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_I2C_CONFIG_IT(I2C_IT));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C interrupts */
+ I2Cx->CR2 |= I2C_IT;
+ }
+ else
+ {
+ /* Disable the selected I2C interrupts */
+ I2Cx->CR2 &= (uint16_t)~I2C_IT;
+ }
+}
+
+/**
+ * @brief Sends a data byte through the I2Cx peripheral.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param Data: Byte to be transmitted..
+ * @retval None
+ */
+void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ /* Write in the DR register the data to be sent */
+ I2Cx->DR = Data;
+}
+
+/**
+ * @brief Returns the most recent received data by the I2Cx peripheral.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @retval The value of the received data.
+ */
+uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ /* Return the data in the DR register */
+ return (uint8_t)I2Cx->DR;
+}
+
+/**
+ * @brief Transmits the address byte to select the slave device.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param Address: specifies the slave address which will be transmitted
+ * @param I2C_Direction: specifies whether the I2C device will be a
+ * Transmitter or a Receiver. This parameter can be one of the following values
+ * @arg I2C_Direction_Transmitter: Transmitter mode
+ * @arg I2C_Direction_Receiver: Receiver mode
+ * @retval None.
+ */
+void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_DIRECTION(I2C_Direction));
+ /* Test on the direction to set/reset the read/write bit */
+ if (I2C_Direction != I2C_Direction_Transmitter)
+ {
+ /* Set the address bit0 for read */
+ Address |= OAR1_ADD0_Set;
+ }
+ else
+ {
+ /* Reset the address bit0 for write */
+ Address &= OAR1_ADD0_Reset;
+ }
+ /* Send the address */
+ I2Cx->DR = Address;
+}
+
+/**
+ * @brief Reads the specified I2C register and returns its value.
+ * @param I2C_Register: specifies the register to read.
+ * This parameter can be one of the following values:
+ * @arg I2C_Register_CR1: CR1 register.
+ * @arg I2C_Register_CR2: CR2 register.
+ * @arg I2C_Register_OAR1: OAR1 register.
+ * @arg I2C_Register_OAR2: OAR2 register.
+ * @arg I2C_Register_DR: DR register.
+ * @arg I2C_Register_SR1: SR1 register.
+ * @arg I2C_Register_SR2: SR2 register.
+ * @arg I2C_Register_CCR: CCR register.
+ * @arg I2C_Register_TRISE: TRISE register.
+ * @retval The value of the read register.
+ */
+uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_REGISTER(I2C_Register));
+
+ tmp = (uint32_t) I2Cx;
+ tmp += I2C_Register;
+
+ /* Return the selected register value */
+ return (*(__IO uint16_t *) tmp);
+}
+
+/**
+ * @brief Enables or disables the specified I2C software reset.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C software reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Peripheral under reset */
+ I2Cx->CR1 |= CR1_SWRST_Set;
+ }
+ else
+ {
+ /* Peripheral not under reset */
+ I2Cx->CR1 &= CR1_SWRST_Reset;
+ }
+}
+
+/**
+ * @brief Selects the specified I2C NACK position in master receiver mode.
+ * This function is useful in I2C Master Receiver mode when the number
+ * of data to be received is equal to 2. In this case, this function
+ * should be called (with parameter I2C_NACKPosition_Next) before data
+ * reception starts,as described in the 2-byte reception procedure
+ * recommended in Reference Manual in Section: Master receiver.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_NACKPosition: specifies the NACK position.
+ * This parameter can be one of the following values:
+ * @arg I2C_NACKPosition_Next: indicates that the next byte will be the last
+ * received byte.
+ * @arg I2C_NACKPosition_Current: indicates that current byte is the last
+ * received byte.
+ *
+ * @note This function configures the same bit (POS) as I2C_PECPositionConfig()
+ * but is intended to be used in I2C mode while I2C_PECPositionConfig()
+ * is intended to used in SMBUS mode.
+ *
+ * @retval None
+ */
+void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_NACK_POSITION(I2C_NACKPosition));
+
+ /* Check the input parameter */
+ if (I2C_NACKPosition == I2C_NACKPosition_Next)
+ {
+ /* Next byte in shift register is the last received byte */
+ I2Cx->CR1 |= I2C_NACKPosition_Next;
+ }
+ else
+ {
+ /* Current byte in shift register is the last received byte */
+ I2Cx->CR1 &= I2C_NACKPosition_Current;
+ }
+}
+
+/**
+ * @brief Drives the SMBusAlert pin high or low for the specified I2C.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_SMBusAlert: specifies SMBAlert pin level.
+ * This parameter can be one of the following values:
+ * @arg I2C_SMBusAlert_Low: SMBAlert pin driven low
+ * @arg I2C_SMBusAlert_High: SMBAlert pin driven high
+ * @retval None
+ */
+void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_SMBUS_ALERT(I2C_SMBusAlert));
+ if (I2C_SMBusAlert == I2C_SMBusAlert_Low)
+ {
+ /* Drive the SMBusAlert pin Low */
+ I2Cx->CR1 |= I2C_SMBusAlert_Low;
+ }
+ else
+ {
+ /* Drive the SMBusAlert pin High */
+ I2Cx->CR1 &= I2C_SMBusAlert_High;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C PEC transfer.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2C PEC transmission.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C PEC transmission */
+ I2Cx->CR1 |= CR1_PEC_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C PEC transmission */
+ I2Cx->CR1 &= CR1_PEC_Reset;
+ }
+}
+
+/**
+ * @brief Selects the specified I2C PEC position.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_PECPosition: specifies the PEC position.
+ * This parameter can be one of the following values:
+ * @arg I2C_PECPosition_Next: indicates that the next byte is PEC
+ * @arg I2C_PECPosition_Current: indicates that current byte is PEC
+ *
+ * @note This function configures the same bit (POS) as I2C_NACKPositionConfig()
+ * but is intended to be used in SMBUS mode while I2C_NACKPositionConfig()
+ * is intended to used in I2C mode.
+ *
+ * @retval None
+ */
+void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_PEC_POSITION(I2C_PECPosition));
+ if (I2C_PECPosition == I2C_PECPosition_Next)
+ {
+ /* Next byte in shift register is PEC */
+ I2Cx->CR1 |= I2C_PECPosition_Next;
+ }
+ else
+ {
+ /* Current byte in shift register is PEC */
+ I2Cx->CR1 &= I2C_PECPosition_Current;
+ }
+}
+
+/**
+ * @brief Enables or disables the PEC value calculation of the transferred bytes.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2Cx PEC value calculation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C PEC calculation */
+ I2Cx->CR1 |= CR1_ENPEC_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C PEC calculation */
+ I2Cx->CR1 &= CR1_ENPEC_Reset;
+ }
+}
+
+/**
+ * @brief Returns the PEC value for the specified I2C.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @retval The PEC value.
+ */
+uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ /* Return the selected I2C PEC value */
+ return ((I2Cx->SR2) >> 8);
+}
+
+/**
+ * @brief Enables or disables the specified I2C ARP.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2Cx ARP.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected I2C ARP */
+ I2Cx->CR1 |= CR1_ENARP_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C ARP */
+ I2Cx->CR1 &= CR1_ENARP_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified I2C Clock stretching.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param NewState: new state of the I2Cx Clock stretching.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState == DISABLE)
+ {
+ /* Enable the selected I2C Clock stretching */
+ I2Cx->CR1 |= CR1_NOSTRETCH_Set;
+ }
+ else
+ {
+ /* Disable the selected I2C Clock stretching */
+ I2Cx->CR1 &= CR1_NOSTRETCH_Reset;
+ }
+}
+
+/**
+ * @brief Selects the specified I2C fast mode duty cycle.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_DutyCycle: specifies the fast mode duty cycle.
+ * This parameter can be one of the following values:
+ * @arg I2C_DutyCycle_2: I2C fast mode Tlow/Thigh = 2
+ * @arg I2C_DutyCycle_16_9: I2C fast mode Tlow/Thigh = 16/9
+ * @retval None
+ */
+void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle)
+{
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_DUTY_CYCLE(I2C_DutyCycle));
+ if (I2C_DutyCycle != I2C_DutyCycle_16_9)
+ {
+ /* I2C fast mode Tlow/Thigh=2 */
+ I2Cx->CCR &= I2C_DutyCycle_2;
+ }
+ else
+ {
+ /* I2C fast mode Tlow/Thigh=16/9 */
+ I2Cx->CCR |= I2C_DutyCycle_16_9;
+ }
+}
+
+
+
+/**
+ * @brief
+ ****************************************************************************************
+ *
+ * I2C State Monitoring Functions
+ *
+ ****************************************************************************************
+ * This I2C driver provides three different ways for I2C state monitoring
+ * depending on the application requirements and constraints:
+ *
+ *
+ * 1) Basic state monitoring:
+ * Using I2C_CheckEvent() function:
+ * It compares the status registers (SR1 and SR2) content to a given event
+ * (can be the combination of one or more flags).
+ * It returns SUCCESS if the current status includes the given flags
+ * and returns ERROR if one or more flags are missing in the current status.
+ * - When to use:
+ * - This function is suitable for most applications as well as for startup
+ * activity since the events are fully described in the product reference manual
+ * (RM0008).
+ * - It is also suitable for users who need to define their own events.
+ * - Limitations:
+ * - If an error occurs (ie. error flags are set besides to the monitored flags),
+ * the I2C_CheckEvent() function may return SUCCESS despite the communication
+ * hold or corrupted real state.
+ * In this case, it is advised to use error interrupts to monitor the error
+ * events and handle them in the interrupt IRQ handler.
+ *
+ * @note
+ * For error management, it is advised to use the following functions:
+ * - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR).
+ * - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs.
+ * Where x is the peripheral instance (I2C1, I2C2 ...)
+ * - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler()
+ * in order to determine which error occured.
+ * - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd()
+ * and/or I2C_GenerateStop() in order to clear the error flag and source,
+ * and return to correct communication status.
+ *
+ *
+ * 2) Advanced state monitoring:
+ * Using the function I2C_GetLastEvent() which returns the image of both status
+ * registers in a single word (uint32_t) (Status Register 2 value is shifted left
+ * by 16 bits and concatenated to Status Register 1).
+ * - When to use:
+ * - This function is suitable for the same applications above but it allows to
+ * overcome the mentioned limitation of I2C_GetFlagStatus() function.
+ * The returned value could be compared to events already defined in the
+ * library (stm32f10x_i2c.h) or to custom values defined by user.
+ * - This function is suitable when multiple flags are monitored at the same time.
+ * - At the opposite of I2C_CheckEvent() function, this function allows user to
+ * choose when an event is accepted (when all events flags are set and no
+ * other flags are set or just when the needed flags are set like
+ * I2C_CheckEvent() function).
+ * - Limitations:
+ * - User may need to define his own events.
+ * - Same remark concerning the error management is applicable for this
+ * function if user decides to check only regular communication flags (and
+ * ignores error flags).
+ *
+ *
+ * 3) Flag-based state monitoring:
+ * Using the function I2C_GetFlagStatus() which simply returns the status of
+ * one single flag (ie. I2C_FLAG_RXNE ...).
+ * - When to use:
+ * - This function could be used for specific applications or in debug phase.
+ * - It is suitable when only one flag checking is needed (most I2C events
+ * are monitored through multiple flags).
+ * - Limitations:
+ * - When calling this function, the Status register is accessed. Some flags are
+ * cleared when the status register is accessed. So checking the status
+ * of one Flag, may clear other ones.
+ * - Function may need to be called twice or more in order to monitor one
+ * single event.
+ *
+ * For detailed description of Events, please refer to section I2C_Events in
+ * stm32f10x_i2c.h file.
+ *
+ */
+
+/**
+ *
+ * 1) Basic state monitoring
+ *******************************************************************************
+ */
+
+/**
+ * @brief Checks whether the last I2Cx Event is equal to the one passed
+ * as parameter.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_EVENT: specifies the event to be checked.
+ * This parameter can be one of the following values:
+ * @arg I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED : EV1
+ * @arg I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED : EV1
+ * @arg I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED : EV1
+ * @arg I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED : EV1
+ * @arg I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED : EV1
+ * @arg I2C_EVENT_SLAVE_BYTE_RECEIVED : EV2
+ * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF) : EV2
+ * @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL) : EV2
+ * @arg I2C_EVENT_SLAVE_BYTE_TRANSMITTED : EV3
+ * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF) : EV3
+ * @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL) : EV3
+ * @arg I2C_EVENT_SLAVE_ACK_FAILURE : EV3_2
+ * @arg I2C_EVENT_SLAVE_STOP_DETECTED : EV4
+ * @arg I2C_EVENT_MASTER_MODE_SELECT : EV5
+ * @arg I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED : EV6
+ * @arg I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED : EV6
+ * @arg I2C_EVENT_MASTER_BYTE_RECEIVED : EV7
+ * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTING : EV8
+ * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTED : EV8_2
+ * @arg I2C_EVENT_MASTER_MODE_ADDRESS10 : EV9
+ *
+ * @note: For detailed description of Events, please refer to section
+ * I2C_Events in stm32f10x_i2c.h file.
+ *
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: Last event is equal to the I2C_EVENT
+ * - ERROR: Last event is different from the I2C_EVENT
+ */
+ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT)
+{
+ uint32_t lastevent = 0;
+ uint32_t flag1 = 0, flag2 = 0;
+ ErrorStatus status = ERROR;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_EVENT(I2C_EVENT));
+
+ /* Read the I2Cx status register */
+ flag1 = I2Cx->SR1;
+ flag2 = I2Cx->SR2;
+ flag2 = flag2 << 16;
+
+ /* Get the last event value from I2C status register */
+ lastevent = (flag1 | flag2) & FLAG_Mask;
+
+ /* Check whether the last event contains the I2C_EVENT */
+ if ((lastevent & I2C_EVENT) == I2C_EVENT)
+ {
+ /* SUCCESS: last event is equal to I2C_EVENT */
+ status = SUCCESS;
+ }
+ else
+ {
+ /* ERROR: last event is different from I2C_EVENT */
+ status = ERROR;
+ }
+ /* Return status */
+ return status;
+}
+
+/**
+ *
+ * 2) Advanced state monitoring
+ *******************************************************************************
+ */
+
+/**
+ * @brief Returns the last I2Cx Event.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ *
+ * @note: For detailed description of Events, please refer to section
+ * I2C_Events in stm32f10x_i2c.h file.
+ *
+ * @retval The last event
+ */
+uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx)
+{
+ uint32_t lastevent = 0;
+ uint32_t flag1 = 0, flag2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+
+ /* Read the I2Cx status register */
+ flag1 = I2Cx->SR1;
+ flag2 = I2Cx->SR2;
+ flag2 = flag2 << 16;
+
+ /* Get the last event value from I2C status register */
+ lastevent = (flag1 | flag2) & FLAG_Mask;
+
+ /* Return status */
+ return lastevent;
+}
+
+/**
+ *
+ * 3) Flag-based state monitoring
+ *******************************************************************************
+ */
+
+/**
+ * @brief Checks whether the specified I2C flag is set or not.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_FLAG_DUALF: Dual flag (Slave mode)
+ * @arg I2C_FLAG_SMBHOST: SMBus host header (Slave mode)
+ * @arg I2C_FLAG_SMBDEFAULT: SMBus default header (Slave mode)
+ * @arg I2C_FLAG_GENCALL: General call header flag (Slave mode)
+ * @arg I2C_FLAG_TRA: Transmitter/Receiver flag
+ * @arg I2C_FLAG_BUSY: Bus busy flag
+ * @arg I2C_FLAG_MSL: Master/Slave flag
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
+ * @arg I2C_FLAG_BERR: Bus error flag
+ * @arg I2C_FLAG_TXE: Data register empty flag (Transmitter)
+ * @arg I2C_FLAG_RXNE: Data register not empty (Receiver) flag
+ * @arg I2C_FLAG_STOPF: Stop detection flag (Slave mode)
+ * @arg I2C_FLAG_ADD10: 10-bit header sent flag (Master mode)
+ * @arg I2C_FLAG_BTF: Byte transfer finished flag
+ * @arg I2C_FLAG_ADDR: Address sent flag (Master mode) "ADSL"
+ * Address matched flag (Slave mode)"ENDA"
+ * @arg I2C_FLAG_SB: Start bit flag (Master mode)
+ * @retval The new state of I2C_FLAG (SET or RESET).
+ */
+FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ __IO uint32_t i2creg = 0, i2cxbase = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_GET_FLAG(I2C_FLAG));
+
+ /* Get the I2Cx peripheral base address */
+ i2cxbase = (uint32_t)I2Cx;
+
+ /* Read flag register index */
+ i2creg = I2C_FLAG >> 28;
+
+ /* Get bit[23:0] of the flag */
+ I2C_FLAG &= FLAG_Mask;
+
+ if(i2creg != 0)
+ {
+ /* Get the I2Cx SR1 register address */
+ i2cxbase += 0x14;
+ }
+ else
+ {
+ /* Flag in I2Cx SR2 Register */
+ I2C_FLAG = (uint32_t)(I2C_FLAG >> 16);
+ /* Get the I2Cx SR2 register address */
+ i2cxbase += 0x18;
+ }
+
+ if(((*(__IO uint32_t *)i2cxbase) & I2C_FLAG) != (uint32_t)RESET)
+ {
+ /* I2C_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* I2C_FLAG is reset */
+ bitstatus = RESET;
+ }
+
+ /* Return the I2C_FLAG status */
+ return bitstatus;
+}
+
+
+
+/**
+ * @brief Clears the I2Cx's pending flags.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
+ * @arg I2C_FLAG_BERR: Bus error flag
+ *
+ * @note
+ * - STOPF (STOP detection) is cleared by software sequence: a read operation
+ * to I2C_SR1 register (I2C_GetFlagStatus()) followed by a write operation
+ * to I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral).
+ * - ADD10 (10-bit header sent) is cleared by software sequence: a read
+ * operation to I2C_SR1 (I2C_GetFlagStatus()) followed by writing the
+ * second byte of the address in DR register.
+ * - BTF (Byte Transfer Finished) is cleared by software sequence: a read
+ * operation to I2C_SR1 register (I2C_GetFlagStatus()) followed by a
+ * read/write to I2C_DR register (I2C_SendData()).
+ * - ADDR (Address sent) is cleared by software sequence: a read operation to
+ * I2C_SR1 register (I2C_GetFlagStatus()) followed by a read operation to
+ * I2C_SR2 register ((void)(I2Cx->SR2)).
+ * - SB (Start Bit) is cleared software sequence: a read operation to I2C_SR1
+ * register (I2C_GetFlagStatus()) followed by a write operation to I2C_DR
+ * register (I2C_SendData()).
+ * @retval None
+ */
+void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
+{
+ uint32_t flagpos = 0;
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG));
+ /* Get the I2C flag position */
+ flagpos = I2C_FLAG & FLAG_Mask;
+ /* Clear the selected I2C flag */
+ I2Cx->SR1 = (uint16_t)~flagpos;
+}
+
+/**
+ * @brief Checks whether the specified I2C interrupt has occurred or not.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_IT: specifies the interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_SMBALERT: SMBus Alert flag
+ * @arg I2C_IT_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_IT_PECERR: PEC error in reception flag
+ * @arg I2C_IT_OVR: Overrun/Underrun flag (Slave mode)
+ * @arg I2C_IT_AF: Acknowledge failure flag
+ * @arg I2C_IT_ARLO: Arbitration lost flag (Master mode)
+ * @arg I2C_IT_BERR: Bus error flag
+ * @arg I2C_IT_TXE: Data register empty flag (Transmitter)
+ * @arg I2C_IT_RXNE: Data register not empty (Receiver) flag
+ * @arg I2C_IT_STOPF: Stop detection flag (Slave mode)
+ * @arg I2C_IT_ADD10: 10-bit header sent flag (Master mode)
+ * @arg I2C_IT_BTF: Byte transfer finished flag
+ * @arg I2C_IT_ADDR: Address sent flag (Master mode) "ADSL"
+ * Address matched flag (Slave mode)"ENDAD"
+ * @arg I2C_IT_SB: Start bit flag (Master mode)
+ * @retval The new state of I2C_IT (SET or RESET).
+ */
+ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t enablestatus = 0;
+
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_GET_IT(I2C_IT));
+
+ /* Check if the interrupt source is enabled or not */
+ enablestatus = (uint32_t)(((I2C_IT & ITEN_Mask) >> 16) & (I2Cx->CR2)) ;
+
+ /* Get bit[23:0] of the flag */
+ I2C_IT &= FLAG_Mask;
+
+ /* Check the status of the specified I2C flag */
+ if (((I2Cx->SR1 & I2C_IT) != (uint32_t)RESET) && enablestatus)
+ {
+ /* I2C_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* I2C_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the I2C_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the I2Cxs interrupt pending bits.
+ * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+ * @param I2C_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_IT_SMBALERT: SMBus Alert interrupt
+ * @arg I2C_IT_TIMEOUT: Timeout or Tlow error interrupt
+ * @arg I2C_IT_PECERR: PEC error in reception interrupt
+ * @arg I2C_IT_OVR: Overrun/Underrun interrupt (Slave mode)
+ * @arg I2C_IT_AF: Acknowledge failure interrupt
+ * @arg I2C_IT_ARLO: Arbitration lost interrupt (Master mode)
+ * @arg I2C_IT_BERR: Bus error interrupt
+ *
+ * @note
+ * - STOPF (STOP detection) is cleared by software sequence: a read operation
+ * to I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to
+ * I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral).
+ * - ADD10 (10-bit header sent) is cleared by software sequence: a read
+ * operation to I2C_SR1 (I2C_GetITStatus()) followed by writing the second
+ * byte of the address in I2C_DR register.
+ * - BTF (Byte Transfer Finished) is cleared by software sequence: a read
+ * operation to I2C_SR1 register (I2C_GetITStatus()) followed by a
+ * read/write to I2C_DR register (I2C_SendData()).
+ * - ADDR (Address sent) is cleared by software sequence: a read operation to
+ * I2C_SR1 register (I2C_GetITStatus()) followed by a read operation to
+ * I2C_SR2 register ((void)(I2Cx->SR2)).
+ * - SB (Start Bit) is cleared by software sequence: a read operation to
+ * I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to
+ * I2C_DR register (I2C_SendData()).
+ * @retval None
+ */
+void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
+{
+ uint32_t flagpos = 0;
+ /* Check the parameters */
+ assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+ assert_param(IS_I2C_CLEAR_IT(I2C_IT));
+ /* Get the I2C flag position */
+ flagpos = I2C_IT & FLAG_Mask;
+ /* Clear the selected I2C flag */
+ I2Cx->SR1 = (uint16_t)~flagpos;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c
new file mode 100644
index 0000000..9d3b0e8
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c
@@ -0,0 +1,190 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_iwdg.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the IWDG firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_iwdg.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup IWDG
+ * @brief IWDG driver modules
+ * @{
+ */
+
+/** @defgroup IWDG_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Private_Defines
+ * @{
+ */
+
+/* ---------------------- IWDG registers bit mask ----------------------------*/
+
+/* KR register bit mask */
+#define KR_KEY_Reload ((uint16_t)0xAAAA)
+#define KR_KEY_Enable ((uint16_t)0xCCCC)
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Enables or disables write access to IWDG_PR and IWDG_RLR registers.
+ * @param IWDG_WriteAccess: new state of write access to IWDG_PR and IWDG_RLR registers.
+ * This parameter can be one of the following values:
+ * @arg IWDG_WriteAccess_Enable: Enable write access to IWDG_PR and IWDG_RLR registers
+ * @arg IWDG_WriteAccess_Disable: Disable write access to IWDG_PR and IWDG_RLR registers
+ * @retval None
+ */
+void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess)
+{
+ /* Check the parameters */
+ assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess));
+ IWDG->KR = IWDG_WriteAccess;
+}
+
+/**
+ * @brief Sets IWDG Prescaler value.
+ * @param IWDG_Prescaler: specifies the IWDG Prescaler value.
+ * This parameter can be one of the following values:
+ * @arg IWDG_Prescaler_4: IWDG prescaler set to 4
+ * @arg IWDG_Prescaler_8: IWDG prescaler set to 8
+ * @arg IWDG_Prescaler_16: IWDG prescaler set to 16
+ * @arg IWDG_Prescaler_32: IWDG prescaler set to 32
+ * @arg IWDG_Prescaler_64: IWDG prescaler set to 64
+ * @arg IWDG_Prescaler_128: IWDG prescaler set to 128
+ * @arg IWDG_Prescaler_256: IWDG prescaler set to 256
+ * @retval None
+ */
+void IWDG_SetPrescaler(uint8_t IWDG_Prescaler)
+{
+ /* Check the parameters */
+ assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler));
+ IWDG->PR = IWDG_Prescaler;
+}
+
+/**
+ * @brief Sets IWDG Reload value.
+ * @param Reload: specifies the IWDG Reload value.
+ * This parameter must be a number between 0 and 0x0FFF.
+ * @retval None
+ */
+void IWDG_SetReload(uint16_t Reload)
+{
+ /* Check the parameters */
+ assert_param(IS_IWDG_RELOAD(Reload));
+ IWDG->RLR = Reload;
+}
+
+/**
+ * @brief Reloads IWDG counter with value defined in the reload register
+ * (write access to IWDG_PR and IWDG_RLR registers disabled).
+ * @param None
+ * @retval None
+ */
+void IWDG_ReloadCounter(void)
+{
+ IWDG->KR = KR_KEY_Reload;
+}
+
+/**
+ * @brief Enables IWDG (write access to IWDG_PR and IWDG_RLR registers disabled).
+ * @param None
+ * @retval None
+ */
+void IWDG_Enable(void)
+{
+ IWDG->KR = KR_KEY_Enable;
+}
+
+/**
+ * @brief Checks whether the specified IWDG flag is set or not.
+ * @param IWDG_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IWDG_FLAG_PVU: Prescaler Value Update on going
+ * @arg IWDG_FLAG_RVU: Reload Value Update on going
+ * @retval The new state of IWDG_FLAG (SET or RESET).
+ */
+FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_IWDG_FLAG(IWDG_FLAG));
+ if ((IWDG->SR & IWDG_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ /* Return the flag status */
+ return bitstatus;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c
new file mode 100644
index 0000000..147bf0f
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c
@@ -0,0 +1,307 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_pwr.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the PWR firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_pwr.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup PWR
+ * @brief PWR driver modules
+ * @{
+ */
+
+/** @defgroup PWR_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Private_Defines
+ * @{
+ */
+
+/* --------- PWR registers bit address in the alias region ---------- */
+#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
+
+/* --- CR Register ---*/
+
+/* Alias word address of DBP bit */
+#define CR_OFFSET (PWR_OFFSET + 0x00)
+#define DBP_BitNumber 0x08
+#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4))
+
+/* Alias word address of PVDE bit */
+#define PVDE_BitNumber 0x04
+#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of EWUP bit */
+#define CSR_OFFSET (PWR_OFFSET + 0x04)
+#define EWUP_BitNumber 0x08
+#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4))
+
+/* ------------------ PWR registers bit mask ------------------------ */
+
+/* CR register bit mask */
+#define CR_DS_MASK ((uint32_t)0xFFFFFFFC)
+#define CR_PLS_MASK ((uint32_t)0xFFFFFF1F)
+
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the PWR peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void PWR_DeInit(void)
+{
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE);
+}
+
+/**
+ * @brief Enables or disables access to the RTC and backup registers.
+ * @param NewState: new state of the access to the RTC and backup registers.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void PWR_BackupAccessCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_DBP_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the Power Voltage Detector(PVD).
+ * @param NewState: new state of the PVD.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void PWR_PVDCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+ * @param PWR_PVDLevel: specifies the PVD detection level
+ * This parameter can be one of the following values:
+ * @arg PWR_PVDLevel_2V2: PVD detection level set to 2.2V
+ * @arg PWR_PVDLevel_2V3: PVD detection level set to 2.3V
+ * @arg PWR_PVDLevel_2V4: PVD detection level set to 2.4V
+ * @arg PWR_PVDLevel_2V5: PVD detection level set to 2.5V
+ * @arg PWR_PVDLevel_2V6: PVD detection level set to 2.6V
+ * @arg PWR_PVDLevel_2V7: PVD detection level set to 2.7V
+ * @arg PWR_PVDLevel_2V8: PVD detection level set to 2.8V
+ * @arg PWR_PVDLevel_2V9: PVD detection level set to 2.9V
+ * @retval None
+ */
+void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel));
+ tmpreg = PWR->CR;
+ /* Clear PLS[7:5] bits */
+ tmpreg &= CR_PLS_MASK;
+ /* Set PLS[7:5] bits according to PWR_PVDLevel value */
+ tmpreg |= PWR_PVDLevel;
+ /* Store the new value */
+ PWR->CR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the WakeUp Pin functionality.
+ * @param NewState: new state of the WakeUp Pin functionality.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void PWR_WakeUpPinCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enters STOP mode.
+ * @param PWR_Regulator: specifies the regulator state in STOP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_Regulator_ON: STOP mode with regulator ON
+ * @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode
+ * @param PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction
+ * @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction
+ * @retval None
+ */
+void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR(PWR_Regulator));
+ assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry));
+
+ /* Select the regulator state in STOP mode ---------------------------------*/
+ tmpreg = PWR->CR;
+ /* Clear PDDS and LPDS bits */
+ tmpreg &= CR_DS_MASK;
+ /* Set LPDS bit according to PWR_Regulator value */
+ tmpreg |= PWR_Regulator;
+ /* Store the new value */
+ PWR->CR = tmpreg;
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP;
+
+ /* Select STOP mode entry --------------------------------------------------*/
+ if(PWR_STOPEntry == PWR_STOPEntry_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __WFE();
+ }
+
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP);
+}
+
+/**
+ * @brief Enters STANDBY mode.
+ * @param None
+ * @retval None
+ */
+void PWR_EnterSTANDBYMode(void)
+{
+ /* Clear Wake-up flag */
+ PWR->CR |= PWR_CR_CWUF;
+ /* Select STANDBY mode */
+ PWR->CR |= PWR_CR_PDDS;
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP;
+/* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM )
+ __force_stores();
+#endif
+ /* Request Wait For Interrupt */
+ __WFI();
+}
+
+/**
+ * @brief Checks whether the specified PWR flag is set or not.
+ * @param PWR_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ * @arg PWR_FLAG_PVDO: PVD Output
+ * @retval The new state of PWR_FLAG (SET or RESET).
+ */
+FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_PWR_GET_FLAG(PWR_FLAG));
+
+ if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ /* Return the flag status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the PWR's pending flags.
+ * @param PWR_FLAG: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ * @retval None
+ */
+void PWR_ClearFlag(uint32_t PWR_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG));
+
+ PWR->CR |= PWR_FLAG << 2;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c
new file mode 100644
index 0000000..4b2ec1f
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c
@@ -0,0 +1,1470 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_rcc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the RCC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup RCC
+ * @brief RCC driver modules
+ * @{
+ */
+
+/** @defgroup RCC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Private_Defines
+ * @{
+ */
+
+/* ------------ RCC registers bit address in the alias region ----------- */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+
+/* --- CR Register ---*/
+
+/* Alias word address of HSION bit */
+#define CR_OFFSET (RCC_OFFSET + 0x00)
+#define HSION_BitNumber 0x00
+#define CR_HSION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4))
+
+/* Alias word address of PLLON bit */
+#define PLLON_BitNumber 0x18
+#define CR_PLLON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4))
+
+#ifdef STM32F10X_CL
+ /* Alias word address of PLL2ON bit */
+ #define PLL2ON_BitNumber 0x1A
+ #define CR_PLL2ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL2ON_BitNumber * 4))
+
+ /* Alias word address of PLL3ON bit */
+ #define PLL3ON_BitNumber 0x1C
+ #define CR_PLL3ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL3ON_BitNumber * 4))
+#endif /* STM32F10X_CL */
+
+/* Alias word address of CSSON bit */
+#define CSSON_BitNumber 0x13
+#define CR_CSSON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4))
+
+/* --- CFGR Register ---*/
+
+/* Alias word address of USBPRE bit */
+#define CFGR_OFFSET (RCC_OFFSET + 0x04)
+
+#ifndef STM32F10X_CL
+ #define USBPRE_BitNumber 0x16
+ #define CFGR_USBPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (USBPRE_BitNumber * 4))
+#else
+ #define OTGFSPRE_BitNumber 0x16
+ #define CFGR_OTGFSPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (OTGFSPRE_BitNumber * 4))
+#endif /* STM32F10X_CL */
+
+/* --- BDCR Register ---*/
+
+/* Alias word address of RTCEN bit */
+#define BDCR_OFFSET (RCC_OFFSET + 0x20)
+#define RTCEN_BitNumber 0x0F
+#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4))
+
+/* Alias word address of BDRST bit */
+#define BDRST_BitNumber 0x10
+#define BDCR_BDRST_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of LSION bit */
+#define CSR_OFFSET (RCC_OFFSET + 0x24)
+#define LSION_BitNumber 0x00
+#define CSR_LSION_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4))
+
+#ifdef STM32F10X_CL
+/* --- CFGR2 Register ---*/
+
+ /* Alias word address of I2S2SRC bit */
+ #define CFGR2_OFFSET (RCC_OFFSET + 0x2C)
+ #define I2S2SRC_BitNumber 0x11
+ #define CFGR2_I2S2SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S2SRC_BitNumber * 4))
+
+ /* Alias word address of I2S3SRC bit */
+ #define I2S3SRC_BitNumber 0x12
+ #define CFGR2_I2S3SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S3SRC_BitNumber * 4))
+#endif /* STM32F10X_CL */
+
+/* ---------------------- RCC registers bit mask ------------------------ */
+
+/* CR register bit mask */
+#define CR_HSEBYP_Reset ((uint32_t)0xFFFBFFFF)
+#define CR_HSEBYP_Set ((uint32_t)0x00040000)
+#define CR_HSEON_Reset ((uint32_t)0xFFFEFFFF)
+#define CR_HSEON_Set ((uint32_t)0x00010000)
+#define CR_HSITRIM_Mask ((uint32_t)0xFFFFFF07)
+
+/* CFGR register bit mask */
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+ #define CFGR_PLL_Mask ((uint32_t)0xFFC2FFFF)
+#else
+ #define CFGR_PLL_Mask ((uint32_t)0xFFC0FFFF)
+#endif /* STM32F10X_CL */
+
+#define CFGR_PLLMull_Mask ((uint32_t)0x003C0000)
+#define CFGR_PLLSRC_Mask ((uint32_t)0x00010000)
+#define CFGR_PLLXTPRE_Mask ((uint32_t)0x00020000)
+#define CFGR_SWS_Mask ((uint32_t)0x0000000C)
+#define CFGR_SW_Mask ((uint32_t)0xFFFFFFFC)
+#define CFGR_HPRE_Reset_Mask ((uint32_t)0xFFFFFF0F)
+#define CFGR_HPRE_Set_Mask ((uint32_t)0x000000F0)
+#define CFGR_PPRE1_Reset_Mask ((uint32_t)0xFFFFF8FF)
+#define CFGR_PPRE1_Set_Mask ((uint32_t)0x00000700)
+#define CFGR_PPRE2_Reset_Mask ((uint32_t)0xFFFFC7FF)
+#define CFGR_PPRE2_Set_Mask ((uint32_t)0x00003800)
+#define CFGR_ADCPRE_Reset_Mask ((uint32_t)0xFFFF3FFF)
+#define CFGR_ADCPRE_Set_Mask ((uint32_t)0x0000C000)
+
+/* CSR register bit mask */
+#define CSR_RMVF_Set ((uint32_t)0x01000000)
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+/* CFGR2 register bit mask */
+ #define CFGR2_PREDIV1SRC ((uint32_t)0x00010000)
+ #define CFGR2_PREDIV1 ((uint32_t)0x0000000F)
+#endif
+#ifdef STM32F10X_CL
+ #define CFGR2_PREDIV2 ((uint32_t)0x000000F0)
+ #define CFGR2_PLL2MUL ((uint32_t)0x00000F00)
+ #define CFGR2_PLL3MUL ((uint32_t)0x0000F000)
+#endif /* STM32F10X_CL */
+
+/* RCC Flag Mask */
+#define FLAG_Mask ((uint8_t)0x1F)
+
+/* CIR register byte 2 (Bits[15:8]) base address */
+#define CIR_BYTE2_ADDRESS ((uint32_t)0x40021009)
+
+/* CIR register byte 3 (Bits[23:16]) base address */
+#define CIR_BYTE3_ADDRESS ((uint32_t)0x4002100A)
+
+/* CFGR register byte 4 (Bits[31:24]) base address */
+#define CFGR_BYTE4_ADDRESS ((uint32_t)0x40021007)
+
+/* BDCR register base address */
+#define BDCR_ADDRESS (PERIPH_BASE + BDCR_OFFSET)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Private_Variables
+ * @{
+ */
+
+static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
+static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8};
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Resets the RCC clock configuration to the default reset state.
+ * @param None
+ * @retval None
+ */
+void RCC_DeInit(void)
+{
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#ifndef STM32F10X_CL
+ RCC->CFGR &= (uint32_t)0xF8FF0000;
+#else
+ RCC->CFGR &= (uint32_t)0xF0FF0000;
+#endif /* STM32F10X_CL */
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+ RCC->CFGR &= (uint32_t)0xFF80FFFF;
+
+#ifdef STM32F10X_CL
+ /* Reset PLL2ON and PLL3ON bits */
+ RCC->CR &= (uint32_t)0xEBFFFFFF;
+
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x00FF0000;
+
+ /* Reset CFGR2 register */
+ RCC->CFGR2 = 0x00000000;
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x009F0000;
+
+ /* Reset CFGR2 register */
+ RCC->CFGR2 = 0x00000000;
+#else
+ /* Disable all interrupts and clear pending bits */
+ RCC->CIR = 0x009F0000;
+#endif /* STM32F10X_CL */
+
+}
+
+/**
+ * @brief Configures the External High Speed oscillator (HSE).
+ * @note HSE can not be stopped if it is used directly or through the PLL as system clock.
+ * @param RCC_HSE: specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_HSE_OFF: HSE oscillator OFF
+ * @arg RCC_HSE_ON: HSE oscillator ON
+ * @arg RCC_HSE_Bypass: HSE oscillator bypassed with external clock
+ * @retval None
+ */
+void RCC_HSEConfig(uint32_t RCC_HSE)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_HSE(RCC_HSE));
+ /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/
+ /* Reset HSEON bit */
+ RCC->CR &= CR_HSEON_Reset;
+ /* Reset HSEBYP bit */
+ RCC->CR &= CR_HSEBYP_Reset;
+ /* Configure HSE (RCC_HSE_OFF is already covered by the code section above) */
+ switch(RCC_HSE)
+ {
+ case RCC_HSE_ON:
+ /* Set HSEON bit */
+ RCC->CR |= CR_HSEON_Set;
+ break;
+
+ case RCC_HSE_Bypass:
+ /* Set HSEBYP and HSEON bits */
+ RCC->CR |= CR_HSEBYP_Set | CR_HSEON_Set;
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Waits for HSE start-up.
+ * @param None
+ * @retval An ErrorStatus enumuration value:
+ * - SUCCESS: HSE oscillator is stable and ready to use
+ * - ERROR: HSE oscillator not yet ready
+ */
+ErrorStatus RCC_WaitForHSEStartUp(void)
+{
+ __IO uint32_t StartUpCounter = 0;
+ ErrorStatus status = ERROR;
+ FlagStatus HSEStatus = RESET;
+
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY);
+ StartUpCounter++;
+ } while((StartUpCounter != HSE_STARTUP_TIMEOUT) && (HSEStatus == RESET));
+
+ if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET)
+ {
+ status = SUCCESS;
+ }
+ else
+ {
+ status = ERROR;
+ }
+ return (status);
+}
+
+/**
+ * @brief Adjusts the Internal High Speed oscillator (HSI) calibration value.
+ * @param HSICalibrationValue: specifies the calibration trimming value.
+ * This parameter must be a number between 0 and 0x1F.
+ * @retval None
+ */
+void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue));
+ tmpreg = RCC->CR;
+ /* Clear HSITRIM[4:0] bits */
+ tmpreg &= CR_HSITRIM_Mask;
+ /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */
+ tmpreg |= (uint32_t)HSICalibrationValue << 3;
+ /* Store the new value */
+ RCC->CR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the Internal High Speed oscillator (HSI).
+ * @note HSI can not be stopped if it is used directly or through the PLL as system clock.
+ * @param NewState: new state of the HSI. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_HSICmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_HSION_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Configures the PLL clock source and multiplication factor.
+ * @note This function must be used only when the PLL is disabled.
+ * @param RCC_PLLSource: specifies the PLL entry clock source.
+ * For @b STM32_Connectivity_line_devices or @b STM32_Value_line_devices,
+ * this parameter can be one of the following values:
+ * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry
+ * @arg RCC_PLLSource_PREDIV1: PREDIV1 clock selected as PLL clock entry
+ * For @b other_STM32_devices, this parameter can be one of the following values:
+ * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry
+ * @arg RCC_PLLSource_HSE_Div1: HSE oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSource_HSE_Div2: HSE oscillator clock divided by 2 selected as PLL clock entry
+ * @param RCC_PLLMul: specifies the PLL multiplication factor.
+ * For @b STM32_Connectivity_line_devices, this parameter can be RCC_PLLMul_x where x:{[4,9], 6_5}
+ * For @b other_STM32_devices, this parameter can be RCC_PLLMul_x where x:[2,16]
+ * @retval None
+ */
+void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource));
+ assert_param(IS_RCC_PLL_MUL(RCC_PLLMul));
+
+ tmpreg = RCC->CFGR;
+ /* Clear PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */
+ tmpreg &= CFGR_PLL_Mask;
+ /* Set the PLL configuration bits */
+ tmpreg |= RCC_PLLSource | RCC_PLLMul;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the PLL.
+ * @note The PLL can not be disabled if it is used as system clock.
+ * @param NewState: new state of the PLL. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_PLLCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CR_PLLON_BB = (uint32_t)NewState;
+}
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+/**
+ * @brief Configures the PREDIV1 division factor.
+ * @note
+ * - This function must be used only when the PLL is disabled.
+ * - This function applies only to STM32 Connectivity line and Value line
+ * devices.
+ * @param RCC_PREDIV1_Source: specifies the PREDIV1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PREDIV1_Source_HSE: HSE selected as PREDIV1 clock
+ * @arg RCC_PREDIV1_Source_PLL2: PLL2 selected as PREDIV1 clock
+ * @note
+ * For @b STM32_Value_line_devices this parameter is always RCC_PREDIV1_Source_HSE
+ * @param RCC_PREDIV1_Div: specifies the PREDIV1 clock division factor.
+ * This parameter can be RCC_PREDIV1_Divx where x:[1,16]
+ * @retval None
+ */
+void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PREDIV1_SOURCE(RCC_PREDIV1_Source));
+ assert_param(IS_RCC_PREDIV1(RCC_PREDIV1_Div));
+
+ tmpreg = RCC->CFGR2;
+ /* Clear PREDIV1[3:0] and PREDIV1SRC bits */
+ tmpreg &= ~(CFGR2_PREDIV1 | CFGR2_PREDIV1SRC);
+ /* Set the PREDIV1 clock source and division factor */
+ tmpreg |= RCC_PREDIV1_Source | RCC_PREDIV1_Div ;
+ /* Store the new value */
+ RCC->CFGR2 = tmpreg;
+}
+#endif
+
+#ifdef STM32F10X_CL
+/**
+ * @brief Configures the PREDIV2 division factor.
+ * @note
+ * - This function must be used only when both PLL2 and PLL3 are disabled.
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param RCC_PREDIV2_Div: specifies the PREDIV2 clock division factor.
+ * This parameter can be RCC_PREDIV2_Divx where x:[1,16]
+ * @retval None
+ */
+void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PREDIV2(RCC_PREDIV2_Div));
+
+ tmpreg = RCC->CFGR2;
+ /* Clear PREDIV2[3:0] bits */
+ tmpreg &= ~CFGR2_PREDIV2;
+ /* Set the PREDIV2 division factor */
+ tmpreg |= RCC_PREDIV2_Div;
+ /* Store the new value */
+ RCC->CFGR2 = tmpreg;
+}
+
+/**
+ * @brief Configures the PLL2 multiplication factor.
+ * @note
+ * - This function must be used only when the PLL2 is disabled.
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param RCC_PLL2Mul: specifies the PLL2 multiplication factor.
+ * This parameter can be RCC_PLL2Mul_x where x:{[8,14], 16, 20}
+ * @retval None
+ */
+void RCC_PLL2Config(uint32_t RCC_PLL2Mul)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL2_MUL(RCC_PLL2Mul));
+
+ tmpreg = RCC->CFGR2;
+ /* Clear PLL2Mul[3:0] bits */
+ tmpreg &= ~CFGR2_PLL2MUL;
+ /* Set the PLL2 configuration bits */
+ tmpreg |= RCC_PLL2Mul;
+ /* Store the new value */
+ RCC->CFGR2 = tmpreg;
+}
+
+
+/**
+ * @brief Enables or disables the PLL2.
+ * @note
+ * - The PLL2 can not be disabled if it is used indirectly as system clock
+ * (i.e. it is used as PLL clock entry that is used as System clock).
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param NewState: new state of the PLL2. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_PLL2Cmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CR_PLL2ON_BB = (uint32_t)NewState;
+}
+
+
+/**
+ * @brief Configures the PLL3 multiplication factor.
+ * @note
+ * - This function must be used only when the PLL3 is disabled.
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param RCC_PLL3Mul: specifies the PLL3 multiplication factor.
+ * This parameter can be RCC_PLL3Mul_x where x:{[8,14], 16, 20}
+ * @retval None
+ */
+void RCC_PLL3Config(uint32_t RCC_PLL3Mul)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL3_MUL(RCC_PLL3Mul));
+
+ tmpreg = RCC->CFGR2;
+ /* Clear PLL3Mul[3:0] bits */
+ tmpreg &= ~CFGR2_PLL3MUL;
+ /* Set the PLL3 configuration bits */
+ tmpreg |= RCC_PLL3Mul;
+ /* Store the new value */
+ RCC->CFGR2 = tmpreg;
+}
+
+
+/**
+ * @brief Enables or disables the PLL3.
+ * @note This function applies only to STM32 Connectivity line devices.
+ * @param NewState: new state of the PLL3. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_PLL3Cmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_PLL3ON_BB = (uint32_t)NewState;
+}
+#endif /* STM32F10X_CL */
+
+/**
+ * @brief Configures the system clock (SYSCLK).
+ * @param RCC_SYSCLKSource: specifies the clock source used as system clock.
+ * This parameter can be one of the following values:
+ * @arg RCC_SYSCLKSource_HSI: HSI selected as system clock
+ * @arg RCC_SYSCLKSource_HSE: HSE selected as system clock
+ * @arg RCC_SYSCLKSource_PLLCLK: PLL selected as system clock
+ * @retval None
+ */
+void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource));
+ tmpreg = RCC->CFGR;
+ /* Clear SW[1:0] bits */
+ tmpreg &= CFGR_SW_Mask;
+ /* Set SW[1:0] bits according to RCC_SYSCLKSource value */
+ tmpreg |= RCC_SYSCLKSource;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Returns the clock source used as system clock.
+ * @param None
+ * @retval The clock source used as system clock. The returned value can
+ * be one of the following:
+ * - 0x00: HSI used as system clock
+ * - 0x04: HSE used as system clock
+ * - 0x08: PLL used as system clock
+ */
+uint8_t RCC_GetSYSCLKSource(void)
+{
+ return ((uint8_t)(RCC->CFGR & CFGR_SWS_Mask));
+}
+
+/**
+ * @brief Configures the AHB clock (HCLK).
+ * @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from
+ * the system clock (SYSCLK).
+ * This parameter can be one of the following values:
+ * @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK
+ * @arg RCC_SYSCLK_Div2: AHB clock = SYSCLK/2
+ * @arg RCC_SYSCLK_Div4: AHB clock = SYSCLK/4
+ * @arg RCC_SYSCLK_Div8: AHB clock = SYSCLK/8
+ * @arg RCC_SYSCLK_Div16: AHB clock = SYSCLK/16
+ * @arg RCC_SYSCLK_Div64: AHB clock = SYSCLK/64
+ * @arg RCC_SYSCLK_Div128: AHB clock = SYSCLK/128
+ * @arg RCC_SYSCLK_Div256: AHB clock = SYSCLK/256
+ * @arg RCC_SYSCLK_Div512: AHB clock = SYSCLK/512
+ * @retval None
+ */
+void RCC_HCLKConfig(uint32_t RCC_SYSCLK)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_HCLK(RCC_SYSCLK));
+ tmpreg = RCC->CFGR;
+ /* Clear HPRE[3:0] bits */
+ tmpreg &= CFGR_HPRE_Reset_Mask;
+ /* Set HPRE[3:0] bits according to RCC_SYSCLK value */
+ tmpreg |= RCC_SYSCLK;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Configures the Low Speed APB clock (PCLK1).
+ * @param RCC_HCLK: defines the APB1 clock divider. This clock is derived from
+ * the AHB clock (HCLK).
+ * This parameter can be one of the following values:
+ * @arg RCC_HCLK_Div1: APB1 clock = HCLK
+ * @arg RCC_HCLK_Div2: APB1 clock = HCLK/2
+ * @arg RCC_HCLK_Div4: APB1 clock = HCLK/4
+ * @arg RCC_HCLK_Div8: APB1 clock = HCLK/8
+ * @arg RCC_HCLK_Div16: APB1 clock = HCLK/16
+ * @retval None
+ */
+void RCC_PCLK1Config(uint32_t RCC_HCLK)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_PCLK(RCC_HCLK));
+ tmpreg = RCC->CFGR;
+ /* Clear PPRE1[2:0] bits */
+ tmpreg &= CFGR_PPRE1_Reset_Mask;
+ /* Set PPRE1[2:0] bits according to RCC_HCLK value */
+ tmpreg |= RCC_HCLK;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Configures the High Speed APB clock (PCLK2).
+ * @param RCC_HCLK: defines the APB2 clock divider. This clock is derived from
+ * the AHB clock (HCLK).
+ * This parameter can be one of the following values:
+ * @arg RCC_HCLK_Div1: APB2 clock = HCLK
+ * @arg RCC_HCLK_Div2: APB2 clock = HCLK/2
+ * @arg RCC_HCLK_Div4: APB2 clock = HCLK/4
+ * @arg RCC_HCLK_Div8: APB2 clock = HCLK/8
+ * @arg RCC_HCLK_Div16: APB2 clock = HCLK/16
+ * @retval None
+ */
+void RCC_PCLK2Config(uint32_t RCC_HCLK)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_PCLK(RCC_HCLK));
+ tmpreg = RCC->CFGR;
+ /* Clear PPRE2[2:0] bits */
+ tmpreg &= CFGR_PPRE2_Reset_Mask;
+ /* Set PPRE2[2:0] bits according to RCC_HCLK value */
+ tmpreg |= RCC_HCLK << 3;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the specified RCC interrupts.
+ * @param RCC_IT: specifies the RCC interrupt sources to be enabled or disabled.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be any combination
+ * of the following values
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt
+ * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt
+ *
+ * For @b other_STM32_devices, this parameter can be any combination of the
+ * following values
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ *
+ * @param NewState: new state of the specified RCC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_IT(RCC_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Perform Byte access to RCC_CIR bits to enable the selected interrupts */
+ *(__IO uint8_t *) CIR_BYTE2_ADDRESS |= RCC_IT;
+ }
+ else
+ {
+ /* Perform Byte access to RCC_CIR bits to disable the selected interrupts */
+ *(__IO uint8_t *) CIR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT;
+ }
+}
+
+#ifndef STM32F10X_CL
+/**
+ * @brief Configures the USB clock (USBCLK).
+ * @param RCC_USBCLKSource: specifies the USB clock source. This clock is
+ * derived from the PLL output.
+ * This parameter can be one of the following values:
+ * @arg RCC_USBCLKSource_PLLCLK_1Div5: PLL clock divided by 1,5 selected as USB
+ * clock source
+ * @arg RCC_USBCLKSource_PLLCLK_Div1: PLL clock selected as USB clock source
+ * @retval None
+ */
+void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_USBCLK_SOURCE(RCC_USBCLKSource));
+
+ *(__IO uint32_t *) CFGR_USBPRE_BB = RCC_USBCLKSource;
+}
+#else
+/**
+ * @brief Configures the USB OTG FS clock (OTGFSCLK).
+ * This function applies only to STM32 Connectivity line devices.
+ * @param RCC_OTGFSCLKSource: specifies the USB OTG FS clock source.
+ * This clock is derived from the PLL output.
+ * This parameter can be one of the following values:
+ * @arg RCC_OTGFSCLKSource_PLLVCO_Div3: PLL VCO clock divided by 2 selected as USB OTG FS clock source
+ * @arg RCC_OTGFSCLKSource_PLLVCO_Div2: PLL VCO clock divided by 2 selected as USB OTG FS clock source
+ * @retval None
+ */
+void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_OTGFSCLK_SOURCE(RCC_OTGFSCLKSource));
+
+ *(__IO uint32_t *) CFGR_OTGFSPRE_BB = RCC_OTGFSCLKSource;
+}
+#endif /* STM32F10X_CL */
+
+/**
+ * @brief Configures the ADC clock (ADCCLK).
+ * @param RCC_PCLK2: defines the ADC clock divider. This clock is derived from
+ * the APB2 clock (PCLK2).
+ * This parameter can be one of the following values:
+ * @arg RCC_PCLK2_Div2: ADC clock = PCLK2/2
+ * @arg RCC_PCLK2_Div4: ADC clock = PCLK2/4
+ * @arg RCC_PCLK2_Div6: ADC clock = PCLK2/6
+ * @arg RCC_PCLK2_Div8: ADC clock = PCLK2/8
+ * @retval None
+ */
+void RCC_ADCCLKConfig(uint32_t RCC_PCLK2)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_ADCCLK(RCC_PCLK2));
+ tmpreg = RCC->CFGR;
+ /* Clear ADCPRE[1:0] bits */
+ tmpreg &= CFGR_ADCPRE_Reset_Mask;
+ /* Set ADCPRE[1:0] bits according to RCC_PCLK2 value */
+ tmpreg |= RCC_PCLK2;
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+#ifdef STM32F10X_CL
+/**
+ * @brief Configures the I2S2 clock source(I2S2CLK).
+ * @note
+ * - This function must be called before enabling I2S2 APB clock.
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param RCC_I2S2CLKSource: specifies the I2S2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2S2CLKSource_SYSCLK: system clock selected as I2S2 clock entry
+ * @arg RCC_I2S2CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S2 clock entry
+ * @retval None
+ */
+void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_I2S2CLK_SOURCE(RCC_I2S2CLKSource));
+
+ *(__IO uint32_t *) CFGR2_I2S2SRC_BB = RCC_I2S2CLKSource;
+}
+
+/**
+ * @brief Configures the I2S3 clock source(I2S2CLK).
+ * @note
+ * - This function must be called before enabling I2S3 APB clock.
+ * - This function applies only to STM32 Connectivity line devices.
+ * @param RCC_I2S3CLKSource: specifies the I2S3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2S3CLKSource_SYSCLK: system clock selected as I2S3 clock entry
+ * @arg RCC_I2S3CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S3 clock entry
+ * @retval None
+ */
+void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_I2S3CLK_SOURCE(RCC_I2S3CLKSource));
+
+ *(__IO uint32_t *) CFGR2_I2S3SRC_BB = RCC_I2S3CLKSource;
+}
+#endif /* STM32F10X_CL */
+
+/**
+ * @brief Configures the External Low Speed oscillator (LSE).
+ * @param RCC_LSE: specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_OFF: LSE oscillator OFF
+ * @arg RCC_LSE_ON: LSE oscillator ON
+ * @arg RCC_LSE_Bypass: LSE oscillator bypassed with external clock
+ * @retval None
+ */
+void RCC_LSEConfig(uint8_t RCC_LSE)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE(RCC_LSE));
+ /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/
+ /* Reset LSEON bit */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF;
+ /* Reset LSEBYP bit */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF;
+ /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */
+ switch(RCC_LSE)
+ {
+ case RCC_LSE_ON:
+ /* Set LSEON bit */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_ON;
+ break;
+
+ case RCC_LSE_Bypass:
+ /* Set LSEBYP and LSEON bits */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON;
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Enables or disables the Internal Low Speed oscillator (LSI).
+ * @note LSI can not be disabled if the IWDG is running.
+ * @param NewState: new state of the LSI. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_LSICmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CSR_LSION_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Configures the RTC clock (RTCCLK).
+ * @note Once the RTC clock is selected it can't be changed unless the Backup domain is reset.
+ * @param RCC_RTCCLKSource: specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock
+ * @arg RCC_RTCCLKSource_LSI: LSI selected as RTC clock
+ * @arg RCC_RTCCLKSource_HSE_Div128: HSE clock divided by 128 selected as RTC clock
+ * @retval None
+ */
+void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource));
+ /* Select the RTC clock source */
+ RCC->BDCR |= RCC_RTCCLKSource;
+}
+
+/**
+ * @brief Enables or disables the RTC clock.
+ * @note This function must be used only after the RTC clock was selected using the RCC_RTCCLKConfig function.
+ * @param NewState: new state of the RTC clock. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_RTCCLKCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) BDCR_RTCEN_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Returns the frequencies of different on chip clocks.
+ * @param RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which will hold
+ * the clocks frequencies.
+ * @note The result of this function could be not correct when using
+ * fractional value for HSE crystal.
+ * @retval None
+ */
+void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks)
+{
+ uint32_t tmp = 0, pllmull = 0, pllsource = 0, presc = 0;
+
+#ifdef STM32F10X_CL
+ uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ uint32_t prediv1factor = 0;
+#endif
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & CFGR_SWS_Mask;
+
+ switch (tmp)
+ {
+ case 0x00: /* HSI used as system clock */
+ RCC_Clocks->SYSCLK_Frequency = HSI_VALUE;
+ break;
+ case 0x04: /* HSE used as system clock */
+ RCC_Clocks->SYSCLK_Frequency = HSE_VALUE;
+ break;
+ case 0x08: /* PLL used as system clock */
+
+ /* Get PLL clock source and multiplication factor ----------------------*/
+ pllmull = RCC->CFGR & CFGR_PLLMull_Mask;
+ pllsource = RCC->CFGR & CFGR_PLLSRC_Mask;
+
+#ifndef STM32F10X_CL
+ pllmull = ( pllmull >> 18) + 2;
+
+ if (pllsource == 0x00)
+ {/* HSI oscillator clock divided by 2 selected as PLL clock entry */
+ RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull;
+ }
+ else
+ {
+ #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1;
+ /* HSE oscillator clock selected as PREDIV1 clock entry */
+ RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull;
+ #else
+ /* HSE selected as PLL clock entry */
+ if ((RCC->CFGR & CFGR_PLLXTPRE_Mask) != (uint32_t)RESET)
+ {/* HSE oscillator clock divided by 2 */
+ RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE >> 1) * pllmull;
+ }
+ else
+ {
+ RCC_Clocks->SYSCLK_Frequency = HSE_VALUE * pllmull;
+ }
+ #endif
+ }
+#else
+ pllmull = pllmull >> 18;
+
+ if (pllmull != 0x0D)
+ {
+ pllmull += 2;
+ }
+ else
+ { /* PLL multiplication factor = PLL input clock * 6.5 */
+ pllmull = 13 / 2;
+ }
+
+ if (pllsource == 0x00)
+ {/* HSI oscillator clock divided by 2 selected as PLL clock entry */
+ RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull;
+ }
+ else
+ {/* PREDIV1 selected as PLL clock entry */
+
+ /* Get PREDIV1 clock source and division factor */
+ prediv1source = RCC->CFGR2 & CFGR2_PREDIV1SRC;
+ prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1;
+
+ if (prediv1source == 0)
+ { /* HSE oscillator clock selected as PREDIV1 clock entry */
+ RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull;
+ }
+ else
+ {/* PLL2 clock selected as PREDIV1 clock entry */
+
+ /* Get PREDIV2 division factor and PLL2 multiplication factor */
+ prediv2factor = ((RCC->CFGR2 & CFGR2_PREDIV2) >> 4) + 1;
+ pll2mull = ((RCC->CFGR2 & CFGR2_PLL2MUL) >> 8 ) + 2;
+ RCC_Clocks->SYSCLK_Frequency = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;
+ }
+ }
+#endif /* STM32F10X_CL */
+ break;
+
+ default:
+ RCC_Clocks->SYSCLK_Frequency = HSI_VALUE;
+ break;
+ }
+
+ /* Compute HCLK, PCLK1, PCLK2 and ADCCLK clocks frequencies ----------------*/
+ /* Get HCLK prescaler */
+ tmp = RCC->CFGR & CFGR_HPRE_Set_Mask;
+ tmp = tmp >> 4;
+ presc = APBAHBPrescTable[tmp];
+ /* HCLK clock frequency */
+ RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc;
+ /* Get PCLK1 prescaler */
+ tmp = RCC->CFGR & CFGR_PPRE1_Set_Mask;
+ tmp = tmp >> 8;
+ presc = APBAHBPrescTable[tmp];
+ /* PCLK1 clock frequency */
+ RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc;
+ /* Get PCLK2 prescaler */
+ tmp = RCC->CFGR & CFGR_PPRE2_Set_Mask;
+ tmp = tmp >> 11;
+ presc = APBAHBPrescTable[tmp];
+ /* PCLK2 clock frequency */
+ RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc;
+ /* Get ADCCLK prescaler */
+ tmp = RCC->CFGR & CFGR_ADCPRE_Set_Mask;
+ tmp = tmp >> 14;
+ presc = ADCPrescTable[tmp];
+ /* ADCCLK clock frequency */
+ RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc;
+}
+
+/**
+ * @brief Enables or disables the AHB peripheral clock.
+ * @param RCC_AHBPeriph: specifies the AHB peripheral to gates its clock.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be any combination
+ * of the following values:
+ * @arg RCC_AHBPeriph_DMA1
+ * @arg RCC_AHBPeriph_DMA2
+ * @arg RCC_AHBPeriph_SRAM
+ * @arg RCC_AHBPeriph_FLITF
+ * @arg RCC_AHBPeriph_CRC
+ * @arg RCC_AHBPeriph_OTG_FS
+ * @arg RCC_AHBPeriph_ETH_MAC
+ * @arg RCC_AHBPeriph_ETH_MAC_Tx
+ * @arg RCC_AHBPeriph_ETH_MAC_Rx
+ *
+ * For @b other_STM32_devices, this parameter can be any combination of the
+ * following values:
+ * @arg RCC_AHBPeriph_DMA1
+ * @arg RCC_AHBPeriph_DMA2
+ * @arg RCC_AHBPeriph_SRAM
+ * @arg RCC_AHBPeriph_FLITF
+ * @arg RCC_AHBPeriph_CRC
+ * @arg RCC_AHBPeriph_FSMC
+ * @arg RCC_AHBPeriph_SDIO
+ *
+ * @note SRAM and FLITF clock can be disabled only during sleep mode.
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RCC->AHBENR |= RCC_AHBPeriph;
+ }
+ else
+ {
+ RCC->AHBENR &= ~RCC_AHBPeriph;
+ }
+}
+
+/**
+ * @brief Enables or disables the High Speed APB (APB2) peripheral clock.
+ * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB,
+ * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE,
+ * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1,
+ * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1,
+ * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3,
+ * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17,
+ * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB2ENR |= RCC_APB2Periph;
+ }
+ else
+ {
+ RCC->APB2ENR &= ~RCC_APB2Periph;
+ }
+}
+
+/**
+ * @brief Enables or disables the Low Speed APB (APB1) peripheral clock.
+ * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4,
+ * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7,
+ * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3,
+ * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4,
+ * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2,
+ * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP,
+ * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC,
+ * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB1ENR |= RCC_APB1Periph;
+ }
+ else
+ {
+ RCC->APB1ENR &= ~RCC_APB1Periph;
+ }
+}
+
+#ifdef STM32F10X_CL
+/**
+ * @brief Forces or releases AHB peripheral reset.
+ * @note This function applies only to STM32 Connectivity line devices.
+ * @param RCC_AHBPeriph: specifies the AHB peripheral to reset.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_AHBPeriph_OTG_FS
+ * @arg RCC_AHBPeriph_ETH_MAC
+ * @param NewState: new state of the specified peripheral reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_AHB_PERIPH_RESET(RCC_AHBPeriph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RCC->AHBRSTR |= RCC_AHBPeriph;
+ }
+ else
+ {
+ RCC->AHBRSTR &= ~RCC_AHBPeriph;
+ }
+}
+#endif /* STM32F10X_CL */
+
+/**
+ * @brief Forces or releases High Speed APB (APB2) peripheral reset.
+ * @param RCC_APB2Periph: specifies the APB2 peripheral to reset.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB,
+ * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE,
+ * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1,
+ * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1,
+ * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3,
+ * RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17,
+ * RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11
+ * @param NewState: new state of the specified peripheral reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB2RSTR |= RCC_APB2Periph;
+ }
+ else
+ {
+ RCC->APB2RSTR &= ~RCC_APB2Periph;
+ }
+}
+
+/**
+ * @brief Forces or releases Low Speed APB (APB1) peripheral reset.
+ * @param RCC_APB1Periph: specifies the APB1 peripheral to reset.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4,
+ * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7,
+ * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3,
+ * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4,
+ * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2,
+ * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP,
+ * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC,
+ * RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB1RSTR |= RCC_APB1Periph;
+ }
+ else
+ {
+ RCC->APB1RSTR &= ~RCC_APB1Periph;
+ }
+}
+
+/**
+ * @brief Forces or releases the Backup domain reset.
+ * @param NewState: new state of the Backup domain reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_BackupResetCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) BDCR_BDRST_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the Clock Security System.
+ * @param NewState: new state of the Clock Security System..
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_ClockSecuritySystemCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_CSSON_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Selects the clock source to output on MCO pin.
+ * @param RCC_MCO: specifies the clock source to output.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be one of the
+ * following values:
+ * @arg RCC_MCO_NoClock: No clock selected
+ * @arg RCC_MCO_SYSCLK: System clock selected
+ * @arg RCC_MCO_HSI: HSI oscillator clock selected
+ * @arg RCC_MCO_HSE: HSE oscillator clock selected
+ * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected
+ * @arg RCC_MCO_PLL2CLK: PLL2 clock selected
+ * @arg RCC_MCO_PLL3CLK_Div2: PLL3 clock divided by 2 selected
+ * @arg RCC_MCO_XT1: External 3-25 MHz oscillator clock selected
+ * @arg RCC_MCO_PLL3CLK: PLL3 clock selected
+ *
+ * For @b other_STM32_devices, this parameter can be one of the following values:
+ * @arg RCC_MCO_NoClock: No clock selected
+ * @arg RCC_MCO_SYSCLK: System clock selected
+ * @arg RCC_MCO_HSI: HSI oscillator clock selected
+ * @arg RCC_MCO_HSE: HSE oscillator clock selected
+ * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected
+ *
+ * @retval None
+ */
+void RCC_MCOConfig(uint8_t RCC_MCO)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_MCO(RCC_MCO));
+
+ /* Perform Byte access to MCO bits to select the MCO source */
+ *(__IO uint8_t *) CFGR_BYTE4_ADDRESS = RCC_MCO;
+}
+
+/**
+ * @brief Checks whether the specified RCC flag is set or not.
+ * @param RCC_FLAG: specifies the flag to check.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be one of the
+ * following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
+ * @arg RCC_FLAG_PLLRDY: PLL clock ready
+ * @arg RCC_FLAG_PLL2RDY: PLL2 clock ready
+ * @arg RCC_FLAG_PLL3RDY: PLL3 clock ready
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
+ * @arg RCC_FLAG_PINRST: Pin reset
+ * @arg RCC_FLAG_PORRST: POR/PDR reset
+ * @arg RCC_FLAG_SFTRST: Software reset
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset
+ * @arg RCC_FLAG_LPWRRST: Low Power reset
+ *
+ * For @b other_STM32_devices, this parameter can be one of the following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
+ * @arg RCC_FLAG_PLLRDY: PLL clock ready
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
+ * @arg RCC_FLAG_PINRST: Pin reset
+ * @arg RCC_FLAG_PORRST: POR/PDR reset
+ * @arg RCC_FLAG_SFTRST: Software reset
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset
+ * @arg RCC_FLAG_LPWRRST: Low Power reset
+ *
+ * @retval The new state of RCC_FLAG (SET or RESET).
+ */
+FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG)
+{
+ uint32_t tmp = 0;
+ uint32_t statusreg = 0;
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_RCC_FLAG(RCC_FLAG));
+
+ /* Get the RCC register index */
+ tmp = RCC_FLAG >> 5;
+ if (tmp == 1) /* The flag to check is in CR register */
+ {
+ statusreg = RCC->CR;
+ }
+ else if (tmp == 2) /* The flag to check is in BDCR register */
+ {
+ statusreg = RCC->BDCR;
+ }
+ else /* The flag to check is in CSR register */
+ {
+ statusreg = RCC->CSR;
+ }
+
+ /* Get the flag position */
+ tmp = RCC_FLAG & FLAG_Mask;
+ if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+
+ /* Return the flag status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the RCC reset flags.
+ * @note The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
+ * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
+ * @param None
+ * @retval None
+ */
+void RCC_ClearFlag(void)
+{
+ /* Set RMVF bit to clear the reset flags */
+ RCC->CSR |= CSR_RMVF_Set;
+}
+
+/**
+ * @brief Checks whether the specified RCC interrupt has occurred or not.
+ * @param RCC_IT: specifies the RCC interrupt source to check.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be one of the
+ * following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt
+ * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ *
+ * For @b other_STM32_devices, this parameter can be one of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ *
+ * @retval The new state of RCC_IT (SET or RESET).
+ */
+ITStatus RCC_GetITStatus(uint8_t RCC_IT)
+{
+ ITStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_RCC_GET_IT(RCC_IT));
+
+ /* Check the status of the specified RCC interrupt */
+ if ((RCC->CIR & RCC_IT) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+
+ /* Return the RCC_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the RCC's interrupt pending bits.
+ * @param RCC_IT: specifies the interrupt pending bit to clear.
+ *
+ * For @b STM32_Connectivity_line_devices, this parameter can be any combination
+ * of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt
+ * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ *
+ * For @b other_STM32_devices, this parameter can be any combination of the
+ * following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt
+ *
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ * @retval None
+ */
+void RCC_ClearITPendingBit(uint8_t RCC_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_CLEAR_IT(RCC_IT));
+
+ /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt
+ pending bits */
+ *(__IO uint8_t *) CIR_BYTE3_ADDRESS = RCC_IT;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c
new file mode 100644
index 0000000..f798d2b
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c
@@ -0,0 +1,339 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_rtc.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the RTC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_rtc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup RTC
+ * @brief RTC driver modules
+ * @{
+ */
+
+/** @defgroup RTC_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_Defines
+ * @{
+ */
+#define RTC_LSB_MASK ((uint32_t)0x0000FFFF) /*!< RTC LSB Mask */
+#define PRLH_MSB_MASK ((uint32_t)0x000F0000) /*!< RTC Prescaler MSB Mask */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Enables or disables the specified RTC interrupts.
+ * @param RTC_IT: specifies the RTC interrupts sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_OW: Overflow interrupt
+ * @arg RTC_IT_ALR: Alarm interrupt
+ * @arg RTC_IT_SEC: Second interrupt
+ * @param NewState: new state of the specified RTC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_IT(RTC_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RTC->CRH |= RTC_IT;
+ }
+ else
+ {
+ RTC->CRH &= (uint16_t)~RTC_IT;
+ }
+}
+
+/**
+ * @brief Enters the RTC configuration mode.
+ * @param None
+ * @retval None
+ */
+void RTC_EnterConfigMode(void)
+{
+ /* Set the CNF flag to enter in the Configuration Mode */
+ RTC->CRL |= RTC_CRL_CNF;
+}
+
+/**
+ * @brief Exits from the RTC configuration mode.
+ * @param None
+ * @retval None
+ */
+void RTC_ExitConfigMode(void)
+{
+ /* Reset the CNF flag to exit from the Configuration Mode */
+ RTC->CRL &= (uint16_t)~((uint16_t)RTC_CRL_CNF);
+}
+
+/**
+ * @brief Gets the RTC counter value.
+ * @param None
+ * @retval RTC counter value.
+ */
+uint32_t RTC_GetCounter(void)
+{
+ uint16_t tmp = 0;
+ tmp = RTC->CNTL;
+ return (((uint32_t)RTC->CNTH << 16 ) | tmp) ;
+}
+
+/**
+ * @brief Sets the RTC counter value.
+ * @param CounterValue: RTC counter new value.
+ * @retval None
+ */
+void RTC_SetCounter(uint32_t CounterValue)
+{
+ RTC_EnterConfigMode();
+ /* Set RTC COUNTER MSB word */
+ RTC->CNTH = CounterValue >> 16;
+ /* Set RTC COUNTER LSB word */
+ RTC->CNTL = (CounterValue & RTC_LSB_MASK);
+ RTC_ExitConfigMode();
+}
+
+/**
+ * @brief Sets the RTC prescaler value.
+ * @param PrescalerValue: RTC prescaler new value.
+ * @retval None
+ */
+void RTC_SetPrescaler(uint32_t PrescalerValue)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_PRESCALER(PrescalerValue));
+
+ RTC_EnterConfigMode();
+ /* Set RTC PRESCALER MSB word */
+ RTC->PRLH = (PrescalerValue & PRLH_MSB_MASK) >> 16;
+ /* Set RTC PRESCALER LSB word */
+ RTC->PRLL = (PrescalerValue & RTC_LSB_MASK);
+ RTC_ExitConfigMode();
+}
+
+/**
+ * @brief Sets the RTC alarm value.
+ * @param AlarmValue: RTC alarm new value.
+ * @retval None
+ */
+void RTC_SetAlarm(uint32_t AlarmValue)
+{
+ RTC_EnterConfigMode();
+ /* Set the ALARM MSB word */
+ RTC->ALRH = AlarmValue >> 16;
+ /* Set the ALARM LSB word */
+ RTC->ALRL = (AlarmValue & RTC_LSB_MASK);
+ RTC_ExitConfigMode();
+}
+
+/**
+ * @brief Gets the RTC divider value.
+ * @param None
+ * @retval RTC Divider value.
+ */
+uint32_t RTC_GetDivider(void)
+{
+ uint32_t tmp = 0x00;
+ tmp = ((uint32_t)RTC->DIVH & (uint32_t)0x000F) << 16;
+ tmp |= RTC->DIVL;
+ return tmp;
+}
+
+/**
+ * @brief Waits until last write operation on RTC registers has finished.
+ * @note This function must be called before any write to RTC registers.
+ * @param None
+ * @retval None
+ */
+void RTC_WaitForLastTask(void)
+{
+ /* Loop until RTOFF flag is set */
+ while ((RTC->CRL & RTC_FLAG_RTOFF) == (uint16_t)RESET)
+ {
+ }
+}
+
+/**
+ * @brief Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL)
+ * are synchronized with RTC APB clock.
+ * @note This function must be called before any read operation after an APB reset
+ * or an APB clock stop.
+ * @param None
+ * @retval None
+ */
+void RTC_WaitForSynchro(void)
+{
+ /* Clear RSF flag */
+ RTC->CRL &= (uint16_t)~RTC_FLAG_RSF;
+ /* Loop until RSF flag is set */
+ while ((RTC->CRL & RTC_FLAG_RSF) == (uint16_t)RESET)
+ {
+ }
+}
+
+/**
+ * @brief Checks whether the specified RTC flag is set or not.
+ * @param RTC_FLAG: specifies the flag to check.
+ * This parameter can be one the following values:
+ * @arg RTC_FLAG_RTOFF: RTC Operation OFF flag
+ * @arg RTC_FLAG_RSF: Registers Synchronized flag
+ * @arg RTC_FLAG_OW: Overflow flag
+ * @arg RTC_FLAG_ALR: Alarm flag
+ * @arg RTC_FLAG_SEC: Second flag
+ * @retval The new state of RTC_FLAG (SET or RESET).
+ */
+FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_RTC_GET_FLAG(RTC_FLAG));
+
+ if ((RTC->CRL & RTC_FLAG) != (uint16_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the RTC's pending flags.
+ * @param RTC_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_FLAG_RSF: Registers Synchronized flag. This flag is cleared only after
+ * an APB reset or an APB Clock stop.
+ * @arg RTC_FLAG_OW: Overflow flag
+ * @arg RTC_FLAG_ALR: Alarm flag
+ * @arg RTC_FLAG_SEC: Second flag
+ * @retval None
+ */
+void RTC_ClearFlag(uint16_t RTC_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG));
+
+ /* Clear the corresponding RTC flag */
+ RTC->CRL &= (uint16_t)~RTC_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified RTC interrupt has occurred or not.
+ * @param RTC_IT: specifies the RTC interrupts sources to check.
+ * This parameter can be one of the following values:
+ * @arg RTC_IT_OW: Overflow interrupt
+ * @arg RTC_IT_ALR: Alarm interrupt
+ * @arg RTC_IT_SEC: Second interrupt
+ * @retval The new state of the RTC_IT (SET or RESET).
+ */
+ITStatus RTC_GetITStatus(uint16_t RTC_IT)
+{
+ ITStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_RTC_GET_IT(RTC_IT));
+
+ bitstatus = (ITStatus)(RTC->CRL & RTC_IT);
+ if (((RTC->CRH & RTC_IT) != (uint16_t)RESET) && (bitstatus != (uint16_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the RTC's interrupt pending bits.
+ * @param RTC_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_OW: Overflow interrupt
+ * @arg RTC_IT_ALR: Alarm interrupt
+ * @arg RTC_IT_SEC: Second interrupt
+ * @retval None
+ */
+void RTC_ClearITPendingBit(uint16_t RTC_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_RTC_IT(RTC_IT));
+
+ /* Clear the corresponding RTC pending bit */
+ RTC->CRL &= (uint16_t)~RTC_IT;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_sdio.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_sdio.c
new file mode 100644
index 0000000..d1870ce
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_sdio.c
@@ -0,0 +1,799 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_sdio.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the SDIO firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_sdio.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup SDIO
+ * @brief SDIO driver modules
+ * @{
+ */
+
+/** @defgroup SDIO_Private_TypesDefinitions
+ * @{
+ */
+
+/* ------------ SDIO registers bit address in the alias region ----------- */
+#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE)
+
+/* --- CLKCR Register ---*/
+
+/* Alias word address of CLKEN bit */
+#define CLKCR_OFFSET (SDIO_OFFSET + 0x04)
+#define CLKEN_BitNumber 0x08
+#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4))
+
+/* --- CMD Register ---*/
+
+/* Alias word address of SDIOSUSPEND bit */
+#define CMD_OFFSET (SDIO_OFFSET + 0x0C)
+#define SDIOSUSPEND_BitNumber 0x0B
+#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4))
+
+/* Alias word address of ENCMDCOMPL bit */
+#define ENCMDCOMPL_BitNumber 0x0C
+#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4))
+
+/* Alias word address of NIEN bit */
+#define NIEN_BitNumber 0x0D
+#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4))
+
+/* Alias word address of ATACMD bit */
+#define ATACMD_BitNumber 0x0E
+#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4))
+
+/* --- DCTRL Register ---*/
+
+/* Alias word address of DMAEN bit */
+#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C)
+#define DMAEN_BitNumber 0x03
+#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4))
+
+/* Alias word address of RWSTART bit */
+#define RWSTART_BitNumber 0x08
+#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4))
+
+/* Alias word address of RWSTOP bit */
+#define RWSTOP_BitNumber 0x09
+#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4))
+
+/* Alias word address of RWMOD bit */
+#define RWMOD_BitNumber 0x0A
+#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4))
+
+/* Alias word address of SDIOEN bit */
+#define SDIOEN_BitNumber 0x0B
+#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4))
+
+/* ---------------------- SDIO registers bit mask ------------------------ */
+
+/* --- CLKCR Register ---*/
+
+/* CLKCR register clear mask */
+#define CLKCR_CLEAR_MASK ((uint32_t)0xFFFF8100)
+
+/* --- PWRCTRL Register ---*/
+
+/* SDIO PWRCTRL Mask */
+#define PWR_PWRCTRL_MASK ((uint32_t)0xFFFFFFFC)
+
+/* --- DCTRL Register ---*/
+
+/* SDIO DCTRL Clear Mask */
+#define DCTRL_CLEAR_MASK ((uint32_t)0xFFFFFF08)
+
+/* --- CMD Register ---*/
+
+/* CMD Register clear mask */
+#define CMD_CLEAR_MASK ((uint32_t)0xFFFFF800)
+
+/* SDIO RESP Registers Address */
+#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14))
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the SDIO peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void SDIO_DeInit(void)
+{
+ SDIO->POWER = 0x00000000;
+ SDIO->CLKCR = 0x00000000;
+ SDIO->ARG = 0x00000000;
+ SDIO->CMD = 0x00000000;
+ SDIO->DTIMER = 0x00000000;
+ SDIO->DLEN = 0x00000000;
+ SDIO->DCTRL = 0x00000000;
+ SDIO->ICR = 0x00C007FF;
+ SDIO->MASK = 0x00000000;
+}
+
+/**
+ * @brief Initializes the SDIO peripheral according to the specified
+ * parameters in the SDIO_InitStruct.
+ * @param SDIO_InitStruct : pointer to a SDIO_InitTypeDef structure
+ * that contains the configuration information for the SDIO peripheral.
+ * @retval None
+ */
+void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_CLOCK_EDGE(SDIO_InitStruct->SDIO_ClockEdge));
+ assert_param(IS_SDIO_CLOCK_BYPASS(SDIO_InitStruct->SDIO_ClockBypass));
+ assert_param(IS_SDIO_CLOCK_POWER_SAVE(SDIO_InitStruct->SDIO_ClockPowerSave));
+ assert_param(IS_SDIO_BUS_WIDE(SDIO_InitStruct->SDIO_BusWide));
+ assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(SDIO_InitStruct->SDIO_HardwareFlowControl));
+
+/*---------------------------- SDIO CLKCR Configuration ------------------------*/
+ /* Get the SDIO CLKCR value */
+ tmpreg = SDIO->CLKCR;
+
+ /* Clear CLKDIV, PWRSAV, BYPASS, WIDBUS, NEGEDGE, HWFC_EN bits */
+ tmpreg &= CLKCR_CLEAR_MASK;
+
+ /* Set CLKDIV bits according to SDIO_ClockDiv value */
+ /* Set PWRSAV bit according to SDIO_ClockPowerSave value */
+ /* Set BYPASS bit according to SDIO_ClockBypass value */
+ /* Set WIDBUS bits according to SDIO_BusWide value */
+ /* Set NEGEDGE bits according to SDIO_ClockEdge value */
+ /* Set HWFC_EN bits according to SDIO_HardwareFlowControl value */
+ tmpreg |= (SDIO_InitStruct->SDIO_ClockDiv | SDIO_InitStruct->SDIO_ClockPowerSave |
+ SDIO_InitStruct->SDIO_ClockBypass | SDIO_InitStruct->SDIO_BusWide |
+ SDIO_InitStruct->SDIO_ClockEdge | SDIO_InitStruct->SDIO_HardwareFlowControl);
+
+ /* Write to SDIO CLKCR */
+ SDIO->CLKCR = tmpreg;
+}
+
+/**
+ * @brief Fills each SDIO_InitStruct member with its default value.
+ * @param SDIO_InitStruct: pointer to an SDIO_InitTypeDef structure which
+ * will be initialized.
+ * @retval None
+ */
+void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct)
+{
+ /* SDIO_InitStruct members default value */
+ SDIO_InitStruct->SDIO_ClockDiv = 0x00;
+ SDIO_InitStruct->SDIO_ClockEdge = SDIO_ClockEdge_Rising;
+ SDIO_InitStruct->SDIO_ClockBypass = SDIO_ClockBypass_Disable;
+ SDIO_InitStruct->SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable;
+ SDIO_InitStruct->SDIO_BusWide = SDIO_BusWide_1b;
+ SDIO_InitStruct->SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable;
+}
+
+/**
+ * @brief Enables or disables the SDIO Clock.
+ * @param NewState: new state of the SDIO Clock. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_ClockCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CLKCR_CLKEN_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Sets the power status of the controller.
+ * @param SDIO_PowerState: new state of the Power state.
+ * This parameter can be one of the following values:
+ * @arg SDIO_PowerState_OFF
+ * @arg SDIO_PowerState_ON
+ * @retval None
+ */
+void SDIO_SetPowerState(uint32_t SDIO_PowerState)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_POWER_STATE(SDIO_PowerState));
+
+ SDIO->POWER &= PWR_PWRCTRL_MASK;
+ SDIO->POWER |= SDIO_PowerState;
+}
+
+/**
+ * @brief Gets the power status of the controller.
+ * @param None
+ * @retval Power status of the controller. The returned value can
+ * be one of the following:
+ * - 0x00: Power OFF
+ * - 0x02: Power UP
+ * - 0x03: Power ON
+ */
+uint32_t SDIO_GetPowerState(void)
+{
+ return (SDIO->POWER & (~PWR_PWRCTRL_MASK));
+}
+
+/**
+ * @brief Enables or disables the SDIO interrupts.
+ * @param SDIO_IT: specifies the SDIO interrupt sources to be enabled or disabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @param NewState: new state of the specified SDIO interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_IT(SDIO_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the SDIO interrupts */
+ SDIO->MASK |= SDIO_IT;
+ }
+ else
+ {
+ /* Disable the SDIO interrupts */
+ SDIO->MASK &= ~SDIO_IT;
+ }
+}
+
+/**
+ * @brief Enables or disables the SDIO DMA request.
+ * @param NewState: new state of the selected SDIO DMA request.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_DMACmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) DCTRL_DMAEN_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Initializes the SDIO Command according to the specified
+ * parameters in the SDIO_CmdInitStruct and send the command.
+ * @param SDIO_CmdInitStruct : pointer to a SDIO_CmdInitTypeDef
+ * structure that contains the configuration information for the SDIO command.
+ * @retval None
+ */
+void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->SDIO_CmdIndex));
+ assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->SDIO_Response));
+ assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->SDIO_Wait));
+ assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->SDIO_CPSM));
+
+/*---------------------------- SDIO ARG Configuration ------------------------*/
+ /* Set the SDIO Argument value */
+ SDIO->ARG = SDIO_CmdInitStruct->SDIO_Argument;
+
+/*---------------------------- SDIO CMD Configuration ------------------------*/
+ /* Get the SDIO CMD value */
+ tmpreg = SDIO->CMD;
+ /* Clear CMDINDEX, WAITRESP, WAITINT, WAITPEND, CPSMEN bits */
+ tmpreg &= CMD_CLEAR_MASK;
+ /* Set CMDINDEX bits according to SDIO_CmdIndex value */
+ /* Set WAITRESP bits according to SDIO_Response value */
+ /* Set WAITINT and WAITPEND bits according to SDIO_Wait value */
+ /* Set CPSMEN bits according to SDIO_CPSM value */
+ tmpreg |= (uint32_t)SDIO_CmdInitStruct->SDIO_CmdIndex | SDIO_CmdInitStruct->SDIO_Response
+ | SDIO_CmdInitStruct->SDIO_Wait | SDIO_CmdInitStruct->SDIO_CPSM;
+
+ /* Write to SDIO CMD */
+ SDIO->CMD = tmpreg;
+}
+
+/**
+ * @brief Fills each SDIO_CmdInitStruct member with its default value.
+ * @param SDIO_CmdInitStruct: pointer to an SDIO_CmdInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct)
+{
+ /* SDIO_CmdInitStruct members default value */
+ SDIO_CmdInitStruct->SDIO_Argument = 0x00;
+ SDIO_CmdInitStruct->SDIO_CmdIndex = 0x00;
+ SDIO_CmdInitStruct->SDIO_Response = SDIO_Response_No;
+ SDIO_CmdInitStruct->SDIO_Wait = SDIO_Wait_No;
+ SDIO_CmdInitStruct->SDIO_CPSM = SDIO_CPSM_Disable;
+}
+
+/**
+ * @brief Returns command index of last command for which response received.
+ * @param None
+ * @retval Returns the command index of the last command response received.
+ */
+uint8_t SDIO_GetCommandResponse(void)
+{
+ return (uint8_t)(SDIO->RESPCMD);
+}
+
+/**
+ * @brief Returns response received from the card for the last command.
+ * @param SDIO_RESP: Specifies the SDIO response register.
+ * This parameter can be one of the following values:
+ * @arg SDIO_RESP1: Response Register 1
+ * @arg SDIO_RESP2: Response Register 2
+ * @arg SDIO_RESP3: Response Register 3
+ * @arg SDIO_RESP4: Response Register 4
+ * @retval The Corresponding response register value.
+ */
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_RESP(SDIO_RESP));
+
+ tmp = SDIO_RESP_ADDR + SDIO_RESP;
+
+ return (*(__IO uint32_t *) tmp);
+}
+
+/**
+ * @brief Initializes the SDIO data path according to the specified
+ * parameters in the SDIO_DataInitStruct.
+ * @param SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure that
+ * contains the configuration information for the SDIO command.
+ * @retval None
+ */
+void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->SDIO_DataLength));
+ assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->SDIO_DataBlockSize));
+ assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->SDIO_TransferDir));
+ assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->SDIO_TransferMode));
+ assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->SDIO_DPSM));
+
+/*---------------------------- SDIO DTIMER Configuration ---------------------*/
+ /* Set the SDIO Data TimeOut value */
+ SDIO->DTIMER = SDIO_DataInitStruct->SDIO_DataTimeOut;
+
+/*---------------------------- SDIO DLEN Configuration -----------------------*/
+ /* Set the SDIO DataLength value */
+ SDIO->DLEN = SDIO_DataInitStruct->SDIO_DataLength;
+
+/*---------------------------- SDIO DCTRL Configuration ----------------------*/
+ /* Get the SDIO DCTRL value */
+ tmpreg = SDIO->DCTRL;
+ /* Clear DEN, DTMODE, DTDIR and DBCKSIZE bits */
+ tmpreg &= DCTRL_CLEAR_MASK;
+ /* Set DEN bit according to SDIO_DPSM value */
+ /* Set DTMODE bit according to SDIO_TransferMode value */
+ /* Set DTDIR bit according to SDIO_TransferDir value */
+ /* Set DBCKSIZE bits according to SDIO_DataBlockSize value */
+ tmpreg |= (uint32_t)SDIO_DataInitStruct->SDIO_DataBlockSize | SDIO_DataInitStruct->SDIO_TransferDir
+ | SDIO_DataInitStruct->SDIO_TransferMode | SDIO_DataInitStruct->SDIO_DPSM;
+
+ /* Write to SDIO DCTRL */
+ SDIO->DCTRL = tmpreg;
+}
+
+/**
+ * @brief Fills each SDIO_DataInitStruct member with its default value.
+ * @param SDIO_DataInitStruct: pointer to an SDIO_DataInitTypeDef structure which
+ * will be initialized.
+ * @retval None
+ */
+void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct)
+{
+ /* SDIO_DataInitStruct members default value */
+ SDIO_DataInitStruct->SDIO_DataTimeOut = 0xFFFFFFFF;
+ SDIO_DataInitStruct->SDIO_DataLength = 0x00;
+ SDIO_DataInitStruct->SDIO_DataBlockSize = SDIO_DataBlockSize_1b;
+ SDIO_DataInitStruct->SDIO_TransferDir = SDIO_TransferDir_ToCard;
+ SDIO_DataInitStruct->SDIO_TransferMode = SDIO_TransferMode_Block;
+ SDIO_DataInitStruct->SDIO_DPSM = SDIO_DPSM_Disable;
+}
+
+/**
+ * @brief Returns number of remaining data bytes to be transferred.
+ * @param None
+ * @retval Number of remaining data bytes to be transferred
+ */
+uint32_t SDIO_GetDataCounter(void)
+{
+ return SDIO->DCOUNT;
+}
+
+/**
+ * @brief Read one data word from Rx FIFO.
+ * @param None
+ * @retval Data received
+ */
+uint32_t SDIO_ReadData(void)
+{
+ return SDIO->FIFO;
+}
+
+/**
+ * @brief Write one data word to Tx FIFO.
+ * @param Data: 32-bit data word to write.
+ * @retval None
+ */
+void SDIO_WriteData(uint32_t Data)
+{
+ SDIO->FIFO = Data;
+}
+
+/**
+ * @brief Returns the number of words left to be written to or read from FIFO.
+ * @param None
+ * @retval Remaining number of words.
+ */
+uint32_t SDIO_GetFIFOCount(void)
+{
+ return SDIO->FIFOCNT;
+}
+
+/**
+ * @brief Starts the SD I/O Read Wait operation.
+ * @param NewState: new state of the Start SDIO Read Wait operation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_StartSDIOReadWait(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) DCTRL_RWSTART_BB = (uint32_t) NewState;
+}
+
+/**
+ * @brief Stops the SD I/O Read Wait operation.
+ * @param NewState: new state of the Stop SDIO Read Wait operation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_StopSDIOReadWait(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) DCTRL_RWSTOP_BB = (uint32_t) NewState;
+}
+
+/**
+ * @brief Sets one of the two options of inserting read wait interval.
+ * @param SDIO_ReadWaitMode: SD I/O Read Wait operation mode.
+ * This parameter can be:
+ * @arg SDIO_ReadWaitMode_CLK: Read Wait control by stopping SDIOCLK
+ * @arg SDIO_ReadWaitMode_DATA2: Read Wait control using SDIO_DATA2
+ * @retval None
+ */
+void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode));
+
+ *(__IO uint32_t *) DCTRL_RWMOD_BB = SDIO_ReadWaitMode;
+}
+
+/**
+ * @brief Enables or disables the SD I/O Mode Operation.
+ * @param NewState: new state of SDIO specific operation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_SetSDIOOperation(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) DCTRL_SDIOEN_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the SD I/O Mode suspend command sending.
+ * @param NewState: new state of the SD I/O Mode suspend command.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_SendSDIOSuspendCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CMD_SDIOSUSPEND_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the command completion signal.
+ * @param NewState: new state of command completion signal.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_CommandCompletionCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CMD_ENCMDCOMPL_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the CE-ATA interrupt.
+ * @param NewState: new state of CE-ATA interrupt. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_CEATAITCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)((~((uint32_t)NewState)) & ((uint32_t)0x1));
+}
+
+/**
+ * @brief Sends CE-ATA command (CMD61).
+ * @param NewState: new state of CE-ATA command. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SDIO_SendCEATACmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CMD_ATACMD_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Checks whether the specified SDIO flag is set or not.
+ * @param SDIO_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode.
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_CMDACT: Command transfer in progress
+ * @arg SDIO_FLAG_TXACT: Data transmit in progress
+ * @arg SDIO_FLAG_RXACT: Data receive in progress
+ * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+ * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+ * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
+ * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
+ * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
+ * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
+ * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
+ * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval The new state of SDIO_FLAG (SET or RESET).
+ */
+FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_FLAG(SDIO_FLAG));
+
+ if ((SDIO->STA & SDIO_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the SDIO's pending flags.
+ * @param SDIO_FLAG: specifies the flag to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+void SDIO_ClearFlag(uint32_t SDIO_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_CLEAR_FLAG(SDIO_FLAG));
+
+ SDIO->ICR = SDIO_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified SDIO interrupt has occurred or not.
+ * @param SDIO_IT: specifies the SDIO interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval The new state of SDIO_IT (SET or RESET).
+ */
+ITStatus SDIO_GetITStatus(uint32_t SDIO_IT)
+{
+ ITStatus bitstatus = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_GET_IT(SDIO_IT));
+ if ((SDIO->STA & SDIO_IT) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the SDIO's interrupt pending bits.
+ * @param SDIO_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+void SDIO_ClearITPendingBit(uint32_t SDIO_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_SDIO_CLEAR_IT(SDIO_IT));
+
+ SDIO->ICR = SDIO_IT;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c
new file mode 100644
index 0000000..51a9cce
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c
@@ -0,0 +1,908 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_spi.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the SPI firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_spi.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup SPI
+ * @brief SPI driver modules
+ * @{
+ */
+
+/** @defgroup SPI_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup SPI_Private_Defines
+ * @{
+ */
+
+/* SPI SPE mask */
+#define CR1_SPE_Set ((uint16_t)0x0040)
+#define CR1_SPE_Reset ((uint16_t)0xFFBF)
+
+/* I2S I2SE mask */
+#define I2SCFGR_I2SE_Set ((uint16_t)0x0400)
+#define I2SCFGR_I2SE_Reset ((uint16_t)0xFBFF)
+
+/* SPI CRCNext mask */
+#define CR1_CRCNext_Set ((uint16_t)0x1000)
+
+/* SPI CRCEN mask */
+#define CR1_CRCEN_Set ((uint16_t)0x2000)
+#define CR1_CRCEN_Reset ((uint16_t)0xDFFF)
+
+/* SPI SSOE mask */
+#define CR2_SSOE_Set ((uint16_t)0x0004)
+#define CR2_SSOE_Reset ((uint16_t)0xFFFB)
+
+/* SPI registers Masks */
+#define CR1_CLEAR_Mask ((uint16_t)0x3040)
+#define I2SCFGR_CLEAR_Mask ((uint16_t)0xF040)
+
+/* SPI or I2S mode selection masks */
+#define SPI_Mode_Select ((uint16_t)0xF7FF)
+#define I2S_Mode_Select ((uint16_t)0x0800)
+
+/* I2S clock source selection masks */
+#define I2S2_CLOCK_SRC ((uint32_t)(0x00020000))
+#define I2S3_CLOCK_SRC ((uint32_t)(0x00040000))
+#define I2S_MUL_MASK ((uint32_t)(0x0000F000))
+#define I2S_DIV_MASK ((uint32_t)(0x000000F0))
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the SPIx peripheral registers to their default
+ * reset values (Affects also the I2Ss).
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @retval None
+ */
+void SPI_I2S_DeInit(SPI_TypeDef* SPIx)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ if (SPIx == SPI1)
+ {
+ /* Enable SPI1 reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE);
+ /* Release SPI1 from reset state */
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE);
+ }
+ else if (SPIx == SPI2)
+ {
+ /* Enable SPI2 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE);
+ /* Release SPI2 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE);
+ }
+ else
+ {
+ if (SPIx == SPI3)
+ {
+ /* Enable SPI3 reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE);
+ /* Release SPI3 from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Initializes the SPIx peripheral according to the specified
+ * parameters in the SPI_InitStruct.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure that
+ * contains the configuration information for the specified SPI peripheral.
+ * @retval None
+ */
+void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct)
+{
+ uint16_t tmpreg = 0;
+
+ /* check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ /* Check the SPI parameters */
+ assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction));
+ assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode));
+ assert_param(IS_SPI_DATASIZE(SPI_InitStruct->SPI_DataSize));
+ assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL));
+ assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA));
+ assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS));
+ assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler));
+ assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit));
+ assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial));
+
+/*---------------------------- SPIx CR1 Configuration ------------------------*/
+ /* Get the SPIx CR1 value */
+ tmpreg = SPIx->CR1;
+ /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */
+ tmpreg &= CR1_CLEAR_Mask;
+ /* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler
+ master/salve mode, CPOL and CPHA */
+ /* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */
+ /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */
+ /* Set LSBFirst bit according to SPI_FirstBit value */
+ /* Set BR bits according to SPI_BaudRatePrescaler value */
+ /* Set CPOL bit according to SPI_CPOL value */
+ /* Set CPHA bit according to SPI_CPHA value */
+ tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode |
+ SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL |
+ SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS |
+ SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit);
+ /* Write to SPIx CR1 */
+ SPIx->CR1 = tmpreg;
+
+ /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */
+ SPIx->I2SCFGR &= SPI_Mode_Select;
+
+/*---------------------------- SPIx CRCPOLY Configuration --------------------*/
+ /* Write to SPIx CRCPOLY */
+ SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial;
+}
+
+/**
+ * @brief Initializes the SPIx peripheral according to the specified
+ * parameters in the I2S_InitStruct.
+ * @param SPIx: where x can be 2 or 3 to select the SPI peripheral
+ * (configured in I2S mode).
+ * @param I2S_InitStruct: pointer to an I2S_InitTypeDef structure that
+ * contains the configuration information for the specified SPI peripheral
+ * configured in I2S mode.
+ * @note
+ * The function calculates the optimal prescaler needed to obtain the most
+ * accurate audio frequency (depending on the I2S clock source, the PLL values
+ * and the product configuration). But in case the prescaler value is greater
+ * than 511, the default value (0x02) will be configured instead. *
+ * @retval None
+ */
+void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct)
+{
+ uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1;
+ uint32_t tmp = 0;
+ RCC_ClocksTypeDef RCC_Clocks;
+ uint32_t sourceclock = 0;
+
+ /* Check the I2S parameters */
+ assert_param(IS_SPI_23_PERIPH(SPIx));
+ assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode));
+ assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard));
+ assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat));
+ assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput));
+ assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq));
+ assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL));
+
+/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/
+ /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+ SPIx->I2SCFGR &= I2SCFGR_CLEAR_Mask;
+ SPIx->I2SPR = 0x0002;
+
+ /* Get the I2SCFGR register value */
+ tmpreg = SPIx->I2SCFGR;
+
+ /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/
+ if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default)
+ {
+ i2sodd = (uint16_t)0;
+ i2sdiv = (uint16_t)2;
+ }
+ /* If the requested audio frequency is not the default, compute the prescaler */
+ else
+ {
+ /* Check the frame length (For the Prescaler computing) */
+ if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b)
+ {
+ /* Packet length is 16 bits */
+ packetlength = 1;
+ }
+ else
+ {
+ /* Packet length is 32 bits */
+ packetlength = 2;
+ }
+
+ /* Get the I2S clock source mask depending on the peripheral number */
+ if(((uint32_t)SPIx) == SPI2_BASE)
+ {
+ /* The mask is relative to I2S2 */
+ tmp = I2S2_CLOCK_SRC;
+ }
+ else
+ {
+ /* The mask is relative to I2S3 */
+ tmp = I2S3_CLOCK_SRC;
+ }
+
+ /* Check the I2S clock source configuration depending on the Device:
+ Only Connectivity line devices have the PLL3 VCO clock */
+#ifdef STM32F10X_CL
+ if((RCC->CFGR2 & tmp) != 0)
+ {
+ /* Get the configuration bits of RCC PLL3 multiplier */
+ tmp = (uint32_t)((RCC->CFGR2 & I2S_MUL_MASK) >> 12);
+
+ /* Get the value of the PLL3 multiplier */
+ if((tmp > 5) && (tmp < 15))
+ {
+ /* Multiplier is between 8 and 14 (value 15 is forbidden) */
+ tmp += 2;
+ }
+ else
+ {
+ if (tmp == 15)
+ {
+ /* Multiplier is 20 */
+ tmp = 20;
+ }
+ }
+ /* Get the PREDIV2 value */
+ sourceclock = (uint32_t)(((RCC->CFGR2 & I2S_DIV_MASK) >> 4) + 1);
+
+ /* Calculate the Source Clock frequency based on PLL3 and PREDIV2 values */
+ sourceclock = (uint32_t) ((HSE_Value / sourceclock) * tmp * 2);
+ }
+ else
+ {
+ /* I2S Clock source is System clock: Get System Clock frequency */
+ RCC_GetClocksFreq(&RCC_Clocks);
+
+ /* Get the source clock value: based on System Clock value */
+ sourceclock = RCC_Clocks.SYSCLK_Frequency;
+ }
+#else /* STM32F10X_HD */
+ /* I2S Clock source is System clock: Get System Clock frequency */
+ RCC_GetClocksFreq(&RCC_Clocks);
+
+ /* Get the source clock value: based on System Clock value */
+ sourceclock = RCC_Clocks.SYSCLK_Frequency;
+#endif /* STM32F10X_CL */
+
+ /* Compute the Real divider depending on the MCLK output state with a floating point */
+ if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable)
+ {
+ /* MCLK output is enabled */
+ tmp = (uint16_t)(((((sourceclock / 256) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5);
+ }
+ else
+ {
+ /* MCLK output is disabled */
+ tmp = (uint16_t)(((((sourceclock / (32 * packetlength)) *10 ) / I2S_InitStruct->I2S_AudioFreq)) + 5);
+ }
+
+ /* Remove the floating point */
+ tmp = tmp / 10;
+
+ /* Check the parity of the divider */
+ i2sodd = (uint16_t)(tmp & (uint16_t)0x0001);
+
+ /* Compute the i2sdiv prescaler */
+ i2sdiv = (uint16_t)((tmp - i2sodd) / 2);
+
+ /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
+ i2sodd = (uint16_t) (i2sodd << 8);
+ }
+
+ /* Test if the divider is 1 or 0 or greater than 0xFF */
+ if ((i2sdiv < 2) || (i2sdiv > 0xFF))
+ {
+ /* Set the default values */
+ i2sdiv = 2;
+ i2sodd = 0;
+ }
+
+ /* Write to SPIx I2SPR register the computed value */
+ SPIx->I2SPR = (uint16_t)(i2sdiv | (uint16_t)(i2sodd | (uint16_t)I2S_InitStruct->I2S_MCLKOutput));
+
+ /* Configure the I2S with the SPI_InitStruct values */
+ tmpreg |= (uint16_t)(I2S_Mode_Select | (uint16_t)(I2S_InitStruct->I2S_Mode | \
+ (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \
+ (uint16_t)I2S_InitStruct->I2S_CPOL))));
+
+ /* Write to SPIx I2SCFGR */
+ SPIx->I2SCFGR = tmpreg;
+}
+
+/**
+ * @brief Fills each SPI_InitStruct member with its default value.
+ * @param SPI_InitStruct : pointer to a SPI_InitTypeDef structure which will be initialized.
+ * @retval None
+ */
+void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct)
+{
+/*--------------- Reset SPI init structure parameters values -----------------*/
+ /* Initialize the SPI_Direction member */
+ SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex;
+ /* initialize the SPI_Mode member */
+ SPI_InitStruct->SPI_Mode = SPI_Mode_Slave;
+ /* initialize the SPI_DataSize member */
+ SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b;
+ /* Initialize the SPI_CPOL member */
+ SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low;
+ /* Initialize the SPI_CPHA member */
+ SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge;
+ /* Initialize the SPI_NSS member */
+ SPI_InitStruct->SPI_NSS = SPI_NSS_Hard;
+ /* Initialize the SPI_BaudRatePrescaler member */
+ SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2;
+ /* Initialize the SPI_FirstBit member */
+ SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB;
+ /* Initialize the SPI_CRCPolynomial member */
+ SPI_InitStruct->SPI_CRCPolynomial = 7;
+}
+
+/**
+ * @brief Fills each I2S_InitStruct member with its default value.
+ * @param I2S_InitStruct : pointer to a I2S_InitTypeDef structure which will be initialized.
+ * @retval None
+ */
+void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct)
+{
+/*--------------- Reset I2S init structure parameters values -----------------*/
+ /* Initialize the I2S_Mode member */
+ I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx;
+
+ /* Initialize the I2S_Standard member */
+ I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips;
+
+ /* Initialize the I2S_DataFormat member */
+ I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b;
+
+ /* Initialize the I2S_MCLKOutput member */
+ I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable;
+
+ /* Initialize the I2S_AudioFreq member */
+ I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default;
+
+ /* Initialize the I2S_CPOL member */
+ I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low;
+}
+
+/**
+ * @brief Enables or disables the specified SPI peripheral.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param NewState: new state of the SPIx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI peripheral */
+ SPIx->CR1 |= CR1_SPE_Set;
+ }
+ else
+ {
+ /* Disable the selected SPI peripheral */
+ SPIx->CR1 &= CR1_SPE_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified SPI peripheral (in I2S mode).
+ * @param SPIx: where x can be 2 or 3 to select the SPI peripheral.
+ * @param NewState: new state of the SPIx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_23_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI peripheral (in I2S mode) */
+ SPIx->I2SCFGR |= I2SCFGR_I2SE_Set;
+ }
+ else
+ {
+ /* Disable the selected SPI peripheral (in I2S mode) */
+ SPIx->I2SCFGR &= I2SCFGR_I2SE_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified SPI/I2S interrupts.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg SPI_I2S_IT_TXE: Tx buffer empty interrupt mask
+ * @arg SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask
+ * @arg SPI_I2S_IT_ERR: Error interrupt mask
+ * @param NewState: new state of the specified SPI/I2S interrupt.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState)
+{
+ uint16_t itpos = 0, itmask = 0 ;
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT));
+
+ /* Get the SPI/I2S IT index */
+ itpos = SPI_I2S_IT >> 4;
+
+ /* Set the IT mask */
+ itmask = (uint16_t)1 << (uint16_t)itpos;
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI/I2S interrupt */
+ SPIx->CR2 |= itmask;
+ }
+ else
+ {
+ /* Disable the selected SPI/I2S interrupt */
+ SPIx->CR2 &= (uint16_t)~itmask;
+ }
+}
+
+/**
+ * @brief Enables or disables the SPIx/I2Sx DMA interface.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @param SPI_I2S_DMAReq: specifies the SPI/I2S DMA transfer request to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request
+ * @arg SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request
+ * @param NewState: new state of the selected SPI/I2S DMA transfer request.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_SPI_I2S_DMAREQ(SPI_I2S_DMAReq));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI/I2S DMA requests */
+ SPIx->CR2 |= SPI_I2S_DMAReq;
+ }
+ else
+ {
+ /* Disable the selected SPI/I2S DMA requests */
+ SPIx->CR2 &= (uint16_t)~SPI_I2S_DMAReq;
+ }
+}
+
+/**
+ * @brief Transmits a Data through the SPIx/I2Sx peripheral.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @param Data : Data to be transmitted.
+ * @retval None
+ */
+void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ /* Write in the DR register the data to be sent */
+ SPIx->DR = Data;
+}
+
+/**
+ * @brief Returns the most recent received data by the SPIx/I2Sx peripheral.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @retval The value of the received data.
+ */
+uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ /* Return the data in the DR register */
+ return SPIx->DR;
+}
+
+/**
+ * @brief Configures internally by software the NSS pin for the selected SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param SPI_NSSInternalSoft: specifies the SPI NSS internal state.
+ * This parameter can be one of the following values:
+ * @arg SPI_NSSInternalSoft_Set: Set NSS pin internally
+ * @arg SPI_NSSInternalSoft_Reset: Reset NSS pin internally
+ * @retval None
+ */
+void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft));
+ if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset)
+ {
+ /* Set NSS pin internally by software */
+ SPIx->CR1 |= SPI_NSSInternalSoft_Set;
+ }
+ else
+ {
+ /* Reset NSS pin internally by software */
+ SPIx->CR1 &= SPI_NSSInternalSoft_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the SS output for the selected SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param NewState: new state of the SPIx SS output.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI SS output */
+ SPIx->CR2 |= CR2_SSOE_Set;
+ }
+ else
+ {
+ /* Disable the selected SPI SS output */
+ SPIx->CR2 &= CR2_SSOE_Reset;
+ }
+}
+
+/**
+ * @brief Configures the data size for the selected SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param SPI_DataSize: specifies the SPI data size.
+ * This parameter can be one of the following values:
+ * @arg SPI_DataSize_16b: Set data frame format to 16bit
+ * @arg SPI_DataSize_8b: Set data frame format to 8bit
+ * @retval None
+ */
+void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_DATASIZE(SPI_DataSize));
+ /* Clear DFF bit */
+ SPIx->CR1 &= (uint16_t)~SPI_DataSize_16b;
+ /* Set new DFF bit value */
+ SPIx->CR1 |= SPI_DataSize;
+}
+
+/**
+ * @brief Transmit the SPIx CRC value.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @retval None
+ */
+void SPI_TransmitCRC(SPI_TypeDef* SPIx)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ /* Enable the selected SPI CRC transmission */
+ SPIx->CR1 |= CR1_CRCNext_Set;
+}
+
+/**
+ * @brief Enables or disables the CRC value calculation of the transferred bytes.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param NewState: new state of the SPIx CRC value calculation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected SPI CRC calculation */
+ SPIx->CR1 |= CR1_CRCEN_Set;
+ }
+ else
+ {
+ /* Disable the selected SPI CRC calculation */
+ SPIx->CR1 &= CR1_CRCEN_Reset;
+ }
+}
+
+/**
+ * @brief Returns the transmit or the receive CRC register value for the specified SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param SPI_CRC: specifies the CRC register to be read.
+ * This parameter can be one of the following values:
+ * @arg SPI_CRC_Tx: Selects Tx CRC register
+ * @arg SPI_CRC_Rx: Selects Rx CRC register
+ * @retval The selected CRC register value..
+ */
+uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC)
+{
+ uint16_t crcreg = 0;
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_CRC(SPI_CRC));
+ if (SPI_CRC != SPI_CRC_Rx)
+ {
+ /* Get the Tx CRC register */
+ crcreg = SPIx->TXCRCR;
+ }
+ else
+ {
+ /* Get the Rx CRC register */
+ crcreg = SPIx->RXCRCR;
+ }
+ /* Return the selected CRC register */
+ return crcreg;
+}
+
+/**
+ * @brief Returns the CRC Polynomial register value for the specified SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @retval The CRC Polynomial register value.
+ */
+uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+ /* Return the CRC polynomial register */
+ return SPIx->CRCPR;
+}
+
+/**
+ * @brief Selects the data transfer direction in bi-directional mode for the specified SPI.
+ * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+ * @param SPI_Direction: specifies the data transfer direction in bi-directional mode.
+ * This parameter can be one of the following values:
+ * @arg SPI_Direction_Tx: Selects Tx transmission direction
+ * @arg SPI_Direction_Rx: Selects Rx receive direction
+ * @retval None
+ */
+void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_DIRECTION(SPI_Direction));
+ if (SPI_Direction == SPI_Direction_Tx)
+ {
+ /* Set the Tx only mode */
+ SPIx->CR1 |= SPI_Direction_Tx;
+ }
+ else
+ {
+ /* Set the Rx only mode */
+ SPIx->CR1 &= SPI_Direction_Rx;
+ }
+}
+
+/**
+ * @brief Checks whether the specified SPI/I2S flag is set or not.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @param SPI_I2S_FLAG: specifies the SPI/I2S flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_I2S_FLAG_TXE: Transmit buffer empty flag.
+ * @arg SPI_I2S_FLAG_RXNE: Receive buffer not empty flag.
+ * @arg SPI_I2S_FLAG_BSY: Busy flag.
+ * @arg SPI_I2S_FLAG_OVR: Overrun flag.
+ * @arg SPI_FLAG_MODF: Mode Fault flag.
+ * @arg SPI_FLAG_CRCERR: CRC Error flag.
+ * @arg I2S_FLAG_UDR: Underrun Error flag.
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag.
+ * @retval The new state of SPI_I2S_FLAG (SET or RESET).
+ */
+FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG));
+ /* Check the status of the specified SPI/I2S flag */
+ if ((SPIx->SR & SPI_I2S_FLAG) != (uint16_t)RESET)
+ {
+ /* SPI_I2S_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* SPI_I2S_FLAG is reset */
+ bitstatus = RESET;
+ }
+ /* Return the SPI_I2S_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the SPIx CRC Error (CRCERR) flag.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * @param SPI_I2S_FLAG: specifies the SPI flag to clear.
+ * This function clears only CRCERR flag.
+ * @note
+ * - OVR (OverRun error) flag is cleared by software sequence: a read
+ * operation to SPI_DR register (SPI_I2S_ReceiveData()) followed by a read
+ * operation to SPI_SR register (SPI_I2S_GetFlagStatus()).
+ * - UDR (UnderRun error) flag is cleared by a read operation to
+ * SPI_SR register (SPI_I2S_GetFlagStatus()).
+ * - MODF (Mode Fault) flag is cleared by software sequence: a read/write
+ * operation to SPI_SR register (SPI_I2S_GetFlagStatus()) followed by a
+ * write operation to SPI_CR1 register (SPI_Cmd() to enable the SPI).
+ * @retval None
+ */
+void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_I2S_CLEAR_FLAG(SPI_I2S_FLAG));
+
+ /* Clear the selected SPI CRC Error (CRCERR) flag */
+ SPIx->SR = (uint16_t)~SPI_I2S_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified SPI/I2S interrupt has occurred or not.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * - 2 or 3 in I2S mode
+ * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_I2S_IT_TXE: Transmit buffer empty interrupt.
+ * @arg SPI_I2S_IT_RXNE: Receive buffer not empty interrupt.
+ * @arg SPI_I2S_IT_OVR: Overrun interrupt.
+ * @arg SPI_IT_MODF: Mode Fault interrupt.
+ * @arg SPI_IT_CRCERR: CRC Error interrupt.
+ * @arg I2S_IT_UDR: Underrun Error interrupt.
+ * @retval The new state of SPI_I2S_IT (SET or RESET).
+ */
+ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint16_t itpos = 0, itmask = 0, enablestatus = 0;
+
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT));
+
+ /* Get the SPI/I2S IT index */
+ itpos = 0x01 << (SPI_I2S_IT & 0x0F);
+
+ /* Get the SPI/I2S IT mask */
+ itmask = SPI_I2S_IT >> 4;
+
+ /* Set the IT mask */
+ itmask = 0x01 << itmask;
+
+ /* Get the SPI_I2S_IT enable bit status */
+ enablestatus = (SPIx->CR2 & itmask) ;
+
+ /* Check the status of the specified SPI/I2S interrupt */
+ if (((SPIx->SR & itpos) != (uint16_t)RESET) && enablestatus)
+ {
+ /* SPI_I2S_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* SPI_I2S_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the SPI_I2S_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the SPIx CRC Error (CRCERR) interrupt pending bit.
+ * @param SPIx: where x can be
+ * - 1, 2 or 3 in SPI mode
+ * @param SPI_I2S_IT: specifies the SPI interrupt pending bit to clear.
+ * This function clears only CRCERR interrupt pending bit.
+ * @note
+ * - OVR (OverRun Error) interrupt pending bit is cleared by software
+ * sequence: a read operation to SPI_DR register (SPI_I2S_ReceiveData())
+ * followed by a read operation to SPI_SR register (SPI_I2S_GetITStatus()).
+ * - UDR (UnderRun Error) interrupt pending bit is cleared by a read
+ * operation to SPI_SR register (SPI_I2S_GetITStatus()).
+ * - MODF (Mode Fault) interrupt pending bit is cleared by software sequence:
+ * a read/write operation to SPI_SR register (SPI_I2S_GetITStatus())
+ * followed by a write operation to SPI_CR1 register (SPI_Cmd() to enable
+ * the SPI).
+ * @retval None
+ */
+void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT)
+{
+ uint16_t itpos = 0;
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_PERIPH(SPIx));
+ assert_param(IS_SPI_I2S_CLEAR_IT(SPI_I2S_IT));
+
+ /* Get the SPI IT index */
+ itpos = 0x01 << (SPI_I2S_IT & 0x0F);
+
+ /* Clear the selected SPI CRC Error (CRCERR) interrupt pending bit */
+ SPIx->SR = (uint16_t)~itpos;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c
new file mode 100644
index 0000000..81c8484
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c
@@ -0,0 +1,2890 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_tim.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the TIM firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_tim.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup TIM
+ * @brief TIM driver modules
+ * @{
+ */
+
+/** @defgroup TIM_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Defines
+ * @{
+ */
+
+/* ---------------------- TIM registers bit mask ------------------------ */
+#define SMCR_ETR_Mask ((uint16_t)0x00FF)
+#define CCMR_Offset ((uint16_t)0x0018)
+#define CCER_CCE_Set ((uint16_t)0x0001)
+#define CCER_CCNE_Set ((uint16_t)0x0004)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_FunctionPrototypes
+ * @{
+ */
+
+static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the TIMx peripheral registers to their default reset values.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @retval None
+ */
+void TIM_DeInit(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+
+ if (TIMx == TIM1)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE);
+ }
+ else if (TIMx == TIM2)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE);
+ }
+ else if (TIMx == TIM3)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE);
+ }
+ else if (TIMx == TIM4)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE);
+ }
+ else if (TIMx == TIM5)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE);
+ }
+ else if (TIMx == TIM6)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE);
+ }
+ else if (TIMx == TIM7)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE);
+ }
+ else if (TIMx == TIM8)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE);
+ }
+ else if (TIMx == TIM9)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE);
+ }
+ else if (TIMx == TIM10)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE);
+ }
+ else if (TIMx == TIM11)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE);
+ }
+ else if (TIMx == TIM12)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE);
+ }
+ else if (TIMx == TIM13)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE);
+ }
+ else if (TIMx == TIM14)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE);
+ }
+ else if (TIMx == TIM15)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE);
+ }
+ else if (TIMx == TIM16)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE);
+ }
+ else
+ {
+ if (TIMx == TIM17)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Initializes the TIMx Time Base Unit peripheral according to
+ * the specified parameters in the TIM_TimeBaseInitStruct.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef
+ * structure that contains the configuration information for the
+ * specified TIM peripheral.
+ * @retval None
+ */
+void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
+{
+ uint16_t tmpcr1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode));
+ assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision));
+
+ tmpcr1 = TIMx->CR1;
+
+ if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM2) || (TIMx == TIM3)||
+ (TIMx == TIM4) || (TIMx == TIM5))
+ {
+ /* Select the Counter Mode */
+ tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS)));
+ tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode;
+ }
+
+ if((TIMx != TIM6) && (TIMx != TIM7))
+ {
+ /* Set the clock division */
+ tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD));
+ tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision;
+ }
+
+ TIMx->CR1 = tmpcr1;
+
+ /* Set the Autoreload value */
+ TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ;
+
+ /* Set the Prescaler value */
+ TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler;
+
+ if ((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17))
+ {
+ /* Set the Repetition Counter value */
+ TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter;
+ }
+
+ /* Generate an update event to reload the Prescaler and the Repetition counter
+ values immediately */
+ TIMx->EGR = TIM_PSCReloadMode_Immediate;
+}
+
+/**
+ * @brief Initializes the TIMx Channel1 according to the specified
+ * parameters in the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= (uint16_t)(~(uint16_t)TIM_CCER_CC1E);
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC1M));
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC1S));
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= TIM_OCInitStruct->TIM_OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1P));
+ /* Set the Output Compare Polarity */
+ tmpccer |= TIM_OCInitStruct->TIM_OCPolarity;
+
+ /* Set the Output State */
+ tmpccer |= TIM_OCInitStruct->TIM_OutputState;
+
+ if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)||
+ (TIMx == TIM16)|| (TIMx == TIM17))
+ {
+ assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NP));
+ /* Set the Output N Polarity */
+ tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity;
+
+ /* Reset the Output N State */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NE));
+ /* Set the Output N State */
+ tmpccer |= TIM_OCInitStruct->TIM_OutputNState;
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1));
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1N));
+
+ /* Set the Output Idle state */
+ tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState;
+ /* Set the Output N Idle state */
+ tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState;
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Initializes the TIMx Channel2 according to the specified
+ * parameters in the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select
+ * the TIM peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC2E));
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC2M));
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S));
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2P));
+ /* Set the Output Compare Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 4);
+
+ /* Set the Output State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 4);
+
+ if((TIMx == TIM1) || (TIMx == TIM8))
+ {
+ assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NP));
+ /* Set the Output N Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 4);
+
+ /* Reset the Output N State */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NE));
+ /* Set the Output N State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 4);
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2));
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2N));
+
+ /* Set the Output Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 2);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 2);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Initializes the TIMx Channel3 according to the specified
+ * parameters in the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC3E));
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC3M));
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC3S));
+ /* Select the Output Compare Mode */
+ tmpccmrx |= TIM_OCInitStruct->TIM_OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3P));
+ /* Set the Output Compare Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 8);
+
+ /* Set the Output State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 8);
+
+ if((TIMx == TIM1) || (TIMx == TIM8))
+ {
+ assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NP));
+ /* Set the Output N Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 8);
+ /* Reset the Output N State */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NE));
+
+ /* Set the Output N State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 8);
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3));
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3N));
+ /* Set the Output Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 4);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 4);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Initializes the TIMx Channel4 according to the specified
+ * parameters in the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+ /* Disable the Channel 2: Reset the CC4E Bit */
+ TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC4E));
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC4M));
+ tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC4S));
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC4P));
+ /* Set the Output Compare Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 12);
+
+ /* Set the Output State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 12);
+
+ if((TIMx == TIM1) || (TIMx == TIM8))
+ {
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS4));
+ /* Set the Output Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 6);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Initializes the TIM peripheral according to the specified
+ * parameters in the TIM_ICInitStruct.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNEL(TIM_ICInitStruct->TIM_Channel));
+ assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler));
+ assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter));
+
+ if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+ (TIMx == TIM4) ||(TIMx == TIM5))
+ {
+ assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity));
+ }
+ else
+ {
+ assert_param(IS_TIM_IC_POLARITY_LITE(TIM_ICInitStruct->TIM_ICPolarity));
+ }
+ if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1)
+ {
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ /* TI1 Configuration */
+ TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2)
+ {
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ /* TI2 Configuration */
+ TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3)
+ {
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* TI3 Configuration */
+ TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else
+ {
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* TI4 Configuration */
+ TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+}
+
+/**
+ * @brief Configures the TIM peripheral according to the specified
+ * parameters in the TIM_ICInitStruct to measure an external PWM signal.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct)
+{
+ uint16_t icoppositepolarity = TIM_ICPolarity_Rising;
+ uint16_t icoppositeselection = TIM_ICSelection_DirectTI;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ /* Select the Opposite Input Polarity */
+ if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising)
+ {
+ icoppositepolarity = TIM_ICPolarity_Falling;
+ }
+ else
+ {
+ icoppositepolarity = TIM_ICPolarity_Rising;
+ }
+ /* Select the Opposite Input */
+ if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI)
+ {
+ icoppositeselection = TIM_ICSelection_IndirectTI;
+ }
+ else
+ {
+ icoppositeselection = TIM_ICSelection_DirectTI;
+ }
+ if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1)
+ {
+ /* TI1 Configuration */
+ TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ /* TI2 Configuration */
+ TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else
+ {
+ /* TI2 Configuration */
+ TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ /* TI1 Configuration */
+ TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+}
+
+/**
+ * @brief Configures the: Break feature, dead time, Lock level, the OSSI,
+ * the OSSR State and the AOE(automatic output enable).
+ * @param TIMx: where x can be 1 or 8 to select the TIM
+ * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure that
+ * contains the BDTR Register configuration information for the TIM peripheral.
+ * @retval None
+ */
+void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState));
+ assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState));
+ assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel));
+ assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break));
+ assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity));
+ assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput));
+ /* Set the Lock level, the Break enable Bit and the Ploarity, the OSSR State,
+ the OSSI State, the dead time value and the Automatic Output Enable Bit */
+ TIMx->BDTR = (uint32_t)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState |
+ TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime |
+ TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity |
+ TIM_BDTRInitStruct->TIM_AutomaticOutput;
+}
+
+/**
+ * @brief Fills each TIM_TimeBaseInitStruct member with its default value.
+ * @param TIM_TimeBaseInitStruct : pointer to a TIM_TimeBaseInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
+{
+ /* Set the default configuration */
+ TIM_TimeBaseInitStruct->TIM_Period = 0xFFFF;
+ TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000;
+ TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1;
+ TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up;
+ TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000;
+}
+
+/**
+ * @brief Fills each TIM_OCInitStruct member with its default value.
+ * @param TIM_OCInitStruct : pointer to a TIM_OCInitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ /* Set the default configuration */
+ TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing;
+ TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable;
+ TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable;
+ TIM_OCInitStruct->TIM_Pulse = 0x0000;
+ TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High;
+ TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High;
+ TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset;
+ TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset;
+}
+
+/**
+ * @brief Fills each TIM_ICInitStruct member with its default value.
+ * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct)
+{
+ /* Set the default configuration */
+ TIM_ICInitStruct->TIM_Channel = TIM_Channel_1;
+ TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising;
+ TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI;
+ TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1;
+ TIM_ICInitStruct->TIM_ICFilter = 0x00;
+}
+
+/**
+ * @brief Fills each TIM_BDTRInitStruct member with its default value.
+ * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure which
+ * will be initialized.
+ * @retval None
+ */
+void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct)
+{
+ /* Set the default configuration */
+ TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable;
+ TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable;
+ TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF;
+ TIM_BDTRInitStruct->TIM_DeadTime = 0x00;
+ TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable;
+ TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low;
+ TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable;
+}
+
+/**
+ * @brief Enables or disables the specified TIM peripheral.
+ * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral.
+ * @param NewState: new state of the TIMx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the TIM Counter */
+ TIMx->CR1 |= TIM_CR1_CEN;
+ }
+ else
+ {
+ /* Disable the TIM Counter */
+ TIMx->CR1 &= (uint16_t)(~((uint16_t)TIM_CR1_CEN));
+ }
+}
+
+/**
+ * @brief Enables or disables the TIM peripheral Main Outputs.
+ * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral.
+ * @param NewState: new state of the TIM peripheral Main Outputs.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the TIM Main Output */
+ TIMx->BDTR |= TIM_BDTR_MOE;
+ }
+ else
+ {
+ /* Disable the TIM Main Output */
+ TIMx->BDTR &= (uint16_t)(~((uint16_t)TIM_BDTR_MOE));
+ }
+}
+
+/**
+ * @brief Enables or disables the specified TIM interrupts.
+ * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral.
+ * @param TIM_IT: specifies the TIM interrupts sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_IT_Update: TIM update Interrupt source
+ * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
+ * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
+ * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
+ * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
+ * @arg TIM_IT_COM: TIM Commutation Interrupt source
+ * @arg TIM_IT_Trigger: TIM Trigger Interrupt source
+ * @arg TIM_IT_Break: TIM Break Interrupt source
+ * @note
+ * - TIM6 and TIM7 can only generate an update interrupt.
+ * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1,
+ * TIM_IT_CC2 or TIM_IT_Trigger.
+ * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1.
+ * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15.
+ * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
+ * @param NewState: new state of the TIM interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_IT(TIM_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the Interrupt sources */
+ TIMx->DIER |= TIM_IT;
+ }
+ else
+ {
+ /* Disable the Interrupt sources */
+ TIMx->DIER &= (uint16_t)~TIM_IT;
+ }
+}
+
+/**
+ * @brief Configures the TIMx event to be generate by software.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_EventSource: specifies the event source.
+ * This parameter can be one or more of the following values:
+ * @arg TIM_EventSource_Update: Timer update Event source
+ * @arg TIM_EventSource_CC1: Timer Capture Compare 1 Event source
+ * @arg TIM_EventSource_CC2: Timer Capture Compare 2 Event source
+ * @arg TIM_EventSource_CC3: Timer Capture Compare 3 Event source
+ * @arg TIM_EventSource_CC4: Timer Capture Compare 4 Event source
+ * @arg TIM_EventSource_COM: Timer COM event source
+ * @arg TIM_EventSource_Trigger: Timer Trigger Event source
+ * @arg TIM_EventSource_Break: Timer Break event source
+ * @note
+ * - TIM6 and TIM7 can only generate an update event.
+ * - TIM_EventSource_COM and TIM_EventSource_Break are used only with TIM1 and TIM8.
+ * @retval None
+ */
+void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource));
+
+ /* Set the event sources */
+ TIMx->EGR = TIM_EventSource;
+}
+
+/**
+ * @brief Configures the TIMx's DMA interface.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select
+ * the TIM peripheral.
+ * @param TIM_DMABase: DMA Base address.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABase_CR, TIM_DMABase_CR2, TIM_DMABase_SMCR,
+ * TIM_DMABase_DIER, TIM1_DMABase_SR, TIM_DMABase_EGR,
+ * TIM_DMABase_CCMR1, TIM_DMABase_CCMR2, TIM_DMABase_CCER,
+ * TIM_DMABase_CNT, TIM_DMABase_PSC, TIM_DMABase_ARR,
+ * TIM_DMABase_RCR, TIM_DMABase_CCR1, TIM_DMABase_CCR2,
+ * TIM_DMABase_CCR3, TIM_DMABase_CCR4, TIM_DMABase_BDTR,
+ * TIM_DMABase_DCR.
+ * @param TIM_DMABurstLength: DMA Burst length.
+ * This parameter can be one value between:
+ * TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers.
+ * @retval None
+ */
+void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+ assert_param(IS_TIM_DMA_BASE(TIM_DMABase));
+ assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength));
+ /* Set the DMA Base and the DMA Burst Length */
+ TIMx->DCR = TIM_DMABase | TIM_DMABurstLength;
+}
+
+/**
+ * @brief Enables or disables the TIMx's DMA Requests.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 15, 16 or 17
+ * to select the TIM peripheral.
+ * @param TIM_DMASource: specifies the DMA Request sources.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_DMA_Update: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_Trigger: TIM Trigger DMA source
+ * @param NewState: new state of the DMA Request sources.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST9_PERIPH(TIMx));
+ assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the DMA sources */
+ TIMx->DIER |= TIM_DMASource;
+ }
+ else
+ {
+ /* Disable the DMA sources */
+ TIMx->DIER &= (uint16_t)~TIM_DMASource;
+ }
+}
+
+/**
+ * @brief Configures the TIMx internal Clock
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15
+ * to select the TIM peripheral.
+ * @retval None
+ */
+void TIM_InternalClockConfig(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ /* Disable slave mode to clock the prescaler directly with the internal clock */
+ TIMx->SMCR &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS));
+}
+
+/**
+ * @brief Configures the TIMx Internal Trigger as External Clock
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_ITRSource: Trigger source.
+ * This parameter can be one of the following values:
+ * @param TIM_TS_ITR0: Internal Trigger 0
+ * @param TIM_TS_ITR1: Internal Trigger 1
+ * @param TIM_TS_ITR2: Internal Trigger 2
+ * @param TIM_TS_ITR3: Internal Trigger 3
+ * @retval None
+ */
+void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource));
+ /* Select the Internal Trigger */
+ TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource);
+ /* Select the External clock mode1 */
+ TIMx->SMCR |= TIM_SlaveMode_External1;
+}
+
+/**
+ * @brief Configures the TIMx Trigger as External Clock
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_TIxExternalCLKSource: Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector
+ * @arg TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1
+ * @arg TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2
+ * @param TIM_ICPolarity: specifies the TIx Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param ICFilter : specifies the filter value.
+ * This parameter must be a value between 0x0 and 0xF.
+ * @retval None
+ */
+void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource,
+ uint16_t TIM_ICPolarity, uint16_t ICFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_TIXCLK_SOURCE(TIM_TIxExternalCLKSource));
+ assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity));
+ assert_param(IS_TIM_IC_FILTER(ICFilter));
+ /* Configure the Timer Input Clock Source */
+ if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2)
+ {
+ TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter);
+ }
+ else
+ {
+ TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter);
+ }
+ /* Select the Trigger source */
+ TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource);
+ /* Select the External clock mode1 */
+ TIMx->SMCR |= TIM_SlaveMode_External1;
+}
+
+/**
+ * @brief Configures the External clock Mode1
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
+ * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+ * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+ * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity: The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+ * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+ * @param ExtTRGFilter: External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+ uint16_t ExtTRGFilter)
+{
+ uint16_t tmpsmcr = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
+ assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
+ assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));
+ /* Configure the ETR Clock source */
+ TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter);
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the SMS Bits */
+ tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS));
+ /* Select the External clock mode1 */
+ tmpsmcr |= TIM_SlaveMode_External1;
+ /* Select the Trigger selection : ETRF */
+ tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS));
+ tmpsmcr |= TIM_TS_ETRF;
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Configures the External clock Mode2
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
+ * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+ * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+ * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity: The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+ * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+ * @param ExtTRGFilter: External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler,
+ uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
+ assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
+ assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));
+ /* Configure the ETR Clock source */
+ TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter);
+ /* Enable the External clock mode2 */
+ TIMx->SMCR |= TIM_SMCR_ECE;
+}
+
+/**
+ * @brief Configures the TIMx External Trigger (ETR).
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
+ * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+ * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+ * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity: The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+ * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+ * @param ExtTRGFilter: External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+ uint16_t ExtTRGFilter)
+{
+ uint16_t tmpsmcr = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
+ assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
+ assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the ETR Bits */
+ tmpsmcr &= SMCR_ETR_Mask;
+ /* Set the Prescaler, the Filter value and the Polarity */
+ tmpsmcr |= (uint16_t)(TIM_ExtTRGPrescaler | (uint16_t)(TIM_ExtTRGPolarity | (uint16_t)(ExtTRGFilter << (uint16_t)8)));
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Configures the TIMx Prescaler.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param Prescaler: specifies the Prescaler Register value
+ * @param TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode
+ * This parameter can be one of the following values:
+ * @arg TIM_PSCReloadMode_Update: The Prescaler is loaded at the update event.
+ * @arg TIM_PSCReloadMode_Immediate: The Prescaler is loaded immediately.
+ * @retval None
+ */
+void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode));
+ /* Set the Prescaler value */
+ TIMx->PSC = Prescaler;
+ /* Set or reset the UG Bit */
+ TIMx->EGR = TIM_PSCReloadMode;
+}
+
+/**
+ * @brief Specifies the TIMx Counter Mode to be used.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_CounterMode: specifies the Counter Mode to be used
+ * This parameter can be one of the following values:
+ * @arg TIM_CounterMode_Up: TIM Up Counting Mode
+ * @arg TIM_CounterMode_Down: TIM Down Counting Mode
+ * @arg TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1
+ * @arg TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2
+ * @arg TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3
+ * @retval None
+ */
+void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode)
+{
+ uint16_t tmpcr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode));
+ tmpcr1 = TIMx->CR1;
+ /* Reset the CMS and DIR Bits */
+ tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS)));
+ /* Set the Counter Mode */
+ tmpcr1 |= TIM_CounterMode;
+ /* Write to TIMx CR1 register */
+ TIMx->CR1 = tmpcr1;
+}
+
+/**
+ * @brief Selects the Input Trigger source
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_InputTriggerSource: The Input Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal Trigger 0
+ * @arg TIM_TS_ITR1: Internal Trigger 1
+ * @arg TIM_TS_ITR2: Internal Trigger 2
+ * @arg TIM_TS_ITR3: Internal Trigger 3
+ * @arg TIM_TS_TI1F_ED: TI1 Edge Detector
+ * @arg TIM_TS_TI1FP1: Filtered Timer Input 1
+ * @arg TIM_TS_TI2FP2: Filtered Timer Input 2
+ * @arg TIM_TS_ETRF: External Trigger input
+ * @retval None
+ */
+void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource)
+{
+ uint16_t tmpsmcr = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource));
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the TS Bits */
+ tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS));
+ /* Set the Input Trigger source */
+ tmpsmcr |= TIM_InputTriggerSource;
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Configures the TIMx Encoder Interface.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_EncoderMode: specifies the TIMx Encoder Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level.
+ * @arg TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level.
+ * @arg TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending
+ * on the level of the other input.
+ * @param TIM_IC1Polarity: specifies the IC1 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Falling: IC Falling edge.
+ * @arg TIM_ICPolarity_Rising: IC Rising edge.
+ * @param TIM_IC2Polarity: specifies the IC2 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Falling: IC Falling edge.
+ * @arg TIM_ICPolarity_Rising: IC Rising edge.
+ * @retval None
+ */
+void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode,
+ uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity)
+{
+ uint16_t tmpsmcr = 0;
+ uint16_t tmpccmr1 = 0;
+ uint16_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST5_PERIPH(TIMx));
+ assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode));
+ assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity));
+ assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity));
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+
+ /* Set the encoder Mode */
+ tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS));
+ tmpsmcr |= TIM_EncoderMode;
+
+ /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+ tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S)));
+ tmpccmr1 |= TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0;
+
+ /* Set the TI1 and the TI2 Polarities */
+ tmpccer &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCER_CC1P)) & ((uint16_t)~((uint16_t)TIM_CCER_CC2P)));
+ tmpccer |= (uint16_t)(TIM_IC1Polarity | (uint16_t)(TIM_IC2Polarity << (uint16_t)4));
+
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmr1;
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Forces the TIMx output 1 waveform to active or inactive level.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC1REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC1REF.
+ * @retval None
+ */
+void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC1M Bits */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1M);
+ /* Configure The Forced output Mode */
+ tmpccmr1 |= TIM_ForcedAction;
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Forces the TIMx output 2 waveform to active or inactive level.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC2REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC2REF.
+ * @retval None
+ */
+void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC2M Bits */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2M);
+ /* Configure The Forced output Mode */
+ tmpccmr1 |= (uint16_t)(TIM_ForcedAction << 8);
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Forces the TIMx output 3 waveform to active or inactive level.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC3REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC3REF.
+ * @retval None
+ */
+void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC1M Bits */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3M);
+ /* Configure The Forced output Mode */
+ tmpccmr2 |= TIM_ForcedAction;
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Forces the TIMx output 4 waveform to active or inactive level.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC4REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC4REF.
+ * @retval None
+ */
+void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC2M Bits */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4M);
+ /* Configure The Forced output Mode */
+ tmpccmr2 |= (uint16_t)(TIM_ForcedAction << 8);
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Enables or disables TIMx peripheral Preload register on ARR.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param NewState: new state of the TIMx peripheral Preload register
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the ARR Preload Bit */
+ TIMx->CR1 |= TIM_CR1_ARPE;
+ }
+ else
+ {
+ /* Reset the ARR Preload Bit */
+ TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_ARPE);
+ }
+}
+
+/**
+ * @brief Selects the TIM peripheral Commutation event.
+ * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral
+ * @param NewState: new state of the Commutation event.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the COM Bit */
+ TIMx->CR2 |= TIM_CR2_CCUS;
+ }
+ else
+ {
+ /* Reset the COM Bit */
+ TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCUS);
+ }
+}
+
+/**
+ * @brief Selects the TIMx peripheral Capture Compare DMA source.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 15, 16 or 17 to select
+ * the TIM peripheral.
+ * @param NewState: new state of the Capture Compare DMA source
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the CCDS Bit */
+ TIMx->CR2 |= TIM_CR2_CCDS;
+ }
+ else
+ {
+ /* Reset the CCDS Bit */
+ TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCDS);
+ }
+}
+
+/**
+ * @brief Sets or Resets the TIM peripheral Capture Compare Preload Control bit.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8 or 15
+ * to select the TIMx peripheral
+ * @param NewState: new state of the Capture Compare Preload Control bit
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST5_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the CCPC Bit */
+ TIMx->CR2 |= TIM_CR2_CCPC;
+ }
+ else
+ {
+ /* Reset the CCPC Bit */
+ TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCPC);
+ }
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR1.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC1PE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1PE);
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr1 |= TIM_OCPreload;
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR2.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select
+ * the TIM peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC2PE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2PE);
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr1 |= (uint16_t)(TIM_OCPreload << 8);
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR3.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC3PE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3PE);
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr2 |= TIM_OCPreload;
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR4.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC4PE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4PE);
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr2 |= (uint16_t)(TIM_OCPreload << 8);
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 1 Fast feature.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC1FE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1FE);
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr1 |= TIM_OCFast;
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 2 Fast feature.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select
+ * the TIM peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC2FE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2FE);
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr1 |= (uint16_t)(TIM_OCFast << 8);
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 3 Fast feature.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+ /* Get the TIMx CCMR2 register value */
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC3FE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3FE);
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr2 |= TIM_OCFast;
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 4 Fast feature.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+ /* Get the TIMx CCMR2 register value */
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC4FE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4FE);
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr2 |= (uint16_t)(TIM_OCFast << 8);
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF1 signal on an external event
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Reset the OC1CE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1CE);
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr1 |= TIM_OCClear;
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF2 signal on an external event
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr1 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+ tmpccmr1 = TIMx->CCMR1;
+ /* Reset the OC2CE Bit */
+ tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2CE);
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr1 |= (uint16_t)(TIM_OCClear << 8);
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF3 signal on an external event
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC3CE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3CE);
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr2 |= TIM_OCClear;
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF4 signal on an external event
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr2 = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+ tmpccmr2 = TIMx->CCMR2;
+ /* Reset the OC4CE Bit */
+ tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4CE);
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr2 |= (uint16_t)(TIM_OCClear << 8);
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Configures the TIMx channel 1 polarity.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_OCPolarity: specifies the OC1 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC1P Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1P);
+ tmpccer |= TIM_OCPolarity;
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx Channel 1N polarity.
+ * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral.
+ * @param TIM_OCNPolarity: specifies the OC1N Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCNPolarity_High: Output Compare active high
+ * @arg TIM_OCNPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
+
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC1NP Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1NP);
+ tmpccer |= TIM_OCNPolarity;
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx channel 2 polarity.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_OCPolarity: specifies the OC2 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC2P Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2P);
+ tmpccer |= (uint16_t)(TIM_OCPolarity << 4);
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx Channel 2N polarity.
+ * @param TIMx: where x can be 1 or 8 to select the TIM peripheral.
+ * @param TIM_OCNPolarity: specifies the OC2N Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCNPolarity_High: Output Compare active high
+ * @arg TIM_OCNPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
+
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC2NP Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2NP);
+ tmpccer |= (uint16_t)(TIM_OCNPolarity << 4);
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx channel 3 polarity.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPolarity: specifies the OC3 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC3P Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3P);
+ tmpccer |= (uint16_t)(TIM_OCPolarity << 8);
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx Channel 3N polarity.
+ * @param TIMx: where x can be 1 or 8 to select the TIM peripheral.
+ * @param TIM_OCNPolarity: specifies the OC3N Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCNPolarity_High: Output Compare active high
+ * @arg TIM_OCNPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
+{
+ uint16_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
+
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC3NP Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3NP);
+ tmpccer |= (uint16_t)(TIM_OCNPolarity << 8);
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx channel 4 polarity.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPolarity: specifies the OC4 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+ tmpccer = TIMx->CCER;
+ /* Set or Reset the CC4P Bit */
+ tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC4P);
+ tmpccer |= (uint16_t)(TIM_OCPolarity << 12);
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel x.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @arg TIM_Channel_4: TIM Channel 4
+ * @param TIM_CCx: specifies the TIM Channel CCxE bit new state.
+ * This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable.
+ * @retval None
+ */
+void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx)
+{
+ uint16_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_CHANNEL(TIM_Channel));
+ assert_param(IS_TIM_CCX(TIM_CCx));
+
+ tmp = CCER_CCE_Set << TIM_Channel;
+
+ /* Reset the CCxE Bit */
+ TIMx->CCER &= (uint16_t)~ tmp;
+
+ /* Set or reset the CCxE Bit */
+ TIMx->CCER |= (uint16_t)(TIM_CCx << TIM_Channel);
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel xN.
+ * @param TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral.
+ * @param TIM_Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @param TIM_CCxN: specifies the TIM Channel CCxNE bit new state.
+ * This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable.
+ * @retval None
+ */
+void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN)
+{
+ uint16_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel));
+ assert_param(IS_TIM_CCXN(TIM_CCxN));
+
+ tmp = CCER_CCNE_Set << TIM_Channel;
+
+ /* Reset the CCxNE Bit */
+ TIMx->CCER &= (uint16_t) ~tmp;
+
+ /* Set or reset the CCxNE Bit */
+ TIMx->CCER |= (uint16_t)(TIM_CCxN << TIM_Channel);
+}
+
+/**
+ * @brief Selects the TIM Output Compare Mode.
+ * @note This function disables the selected channel before changing the Output
+ * Compare Mode.
+ * User has to enable this channel using TIM_CCxCmd and TIM_CCxNCmd functions.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @arg TIM_Channel_4: TIM Channel 4
+ * @param TIM_OCMode: specifies the TIM Output Compare Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCMode_Timing
+ * @arg TIM_OCMode_Active
+ * @arg TIM_OCMode_Toggle
+ * @arg TIM_OCMode_PWM1
+ * @arg TIM_OCMode_PWM2
+ * @arg TIM_ForcedAction_Active
+ * @arg TIM_ForcedAction_InActive
+ * @retval None
+ */
+void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode)
+{
+ uint32_t tmp = 0;
+ uint16_t tmp1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_CHANNEL(TIM_Channel));
+ assert_param(IS_TIM_OCM(TIM_OCMode));
+
+ tmp = (uint32_t) TIMx;
+ tmp += CCMR_Offset;
+
+ tmp1 = CCER_CCE_Set << (uint16_t)TIM_Channel;
+
+ /* Disable the Channel: Reset the CCxE Bit */
+ TIMx->CCER &= (uint16_t) ~tmp1;
+
+ if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3))
+ {
+ tmp += (TIM_Channel>>1);
+
+ /* Reset the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC1M);
+
+ /* Configure the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp |= TIM_OCMode;
+ }
+ else
+ {
+ tmp += (uint16_t)(TIM_Channel - (uint16_t)4)>> (uint16_t)1;
+
+ /* Reset the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC2M);
+
+ /* Configure the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp |= (uint16_t)(TIM_OCMode << 8);
+ }
+}
+
+/**
+ * @brief Enables or Disables the TIMx Update event.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param NewState: new state of the TIMx UDIS bit
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the Update Disable Bit */
+ TIMx->CR1 |= TIM_CR1_UDIS;
+ }
+ else
+ {
+ /* Reset the Update Disable Bit */
+ TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_UDIS);
+ }
+}
+
+/**
+ * @brief Configures the TIMx Update Request Interrupt source.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_UpdateSource: specifies the Update source.
+ * This parameter can be one of the following values:
+ * @arg TIM_UpdateSource_Regular: Source of update is the counter overflow/underflow
+ or the setting of UG bit, or an update generation
+ through the slave mode controller.
+ * @arg TIM_UpdateSource_Global: Source of update is counter overflow/underflow.
+ * @retval None
+ */
+void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource));
+ if (TIM_UpdateSource != TIM_UpdateSource_Global)
+ {
+ /* Set the URS Bit */
+ TIMx->CR1 |= TIM_CR1_URS;
+ }
+ else
+ {
+ /* Reset the URS Bit */
+ TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_URS);
+ }
+}
+
+/**
+ * @brief Enables or disables the TIMx's Hall sensor interface.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param NewState: new state of the TIMx Hall sensor interface.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the TI1S Bit */
+ TIMx->CR2 |= TIM_CR2_TI1S;
+ }
+ else
+ {
+ /* Reset the TI1S Bit */
+ TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_TI1S);
+ }
+}
+
+/**
+ * @brief Selects the TIMx's One Pulse Mode.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_OPMode: specifies the OPM Mode to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_OPMode_Single
+ * @arg TIM_OPMode_Repetitive
+ * @retval None
+ */
+void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_OPM_MODE(TIM_OPMode));
+ /* Reset the OPM Bit */
+ TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_OPM);
+ /* Configure the OPM Mode */
+ TIMx->CR1 |= TIM_OPMode;
+}
+
+/**
+ * @brief Selects the TIMx Trigger Output Mode.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_TRGOSource: specifies the Trigger Output source.
+ * This paramter can be one of the following values:
+ *
+ * - For all TIMx
+ * @arg TIM_TRGOSource_Reset: The UG bit in the TIM_EGR register is used as the trigger output (TRGO).
+ * @arg TIM_TRGOSource_Enable: The Counter Enable CEN is used as the trigger output (TRGO).
+ * @arg TIM_TRGOSource_Update: The update event is selected as the trigger output (TRGO).
+ *
+ * - For all TIMx except TIM6 and TIM7
+ * @arg TIM_TRGOSource_OC1: The trigger output sends a positive pulse when the CC1IF flag
+ * is to be set, as soon as a capture or compare match occurs (TRGO).
+ * @arg TIM_TRGOSource_OC1Ref: OC1REF signal is used as the trigger output (TRGO).
+ * @arg TIM_TRGOSource_OC2Ref: OC2REF signal is used as the trigger output (TRGO).
+ * @arg TIM_TRGOSource_OC3Ref: OC3REF signal is used as the trigger output (TRGO).
+ * @arg TIM_TRGOSource_OC4Ref: OC4REF signal is used as the trigger output (TRGO).
+ *
+ * @retval None
+ */
+void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST7_PERIPH(TIMx));
+ assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource));
+ /* Reset the MMS Bits */
+ TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_MMS);
+ /* Select the TRGO source */
+ TIMx->CR2 |= TIM_TRGOSource;
+}
+
+/**
+ * @brief Selects the TIMx Slave Mode.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_SlaveMode: specifies the Timer Slave Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_SlaveMode_Reset: Rising edge of the selected trigger signal (TRGI) re-initializes
+ * the counter and triggers an update of the registers.
+ * @arg TIM_SlaveMode_Gated: The counter clock is enabled when the trigger signal (TRGI) is high.
+ * @arg TIM_SlaveMode_Trigger: The counter starts at a rising edge of the trigger TRGI.
+ * @arg TIM_SlaveMode_External1: Rising edges of the selected trigger (TRGI) clock the counter.
+ * @retval None
+ */
+void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode));
+ /* Reset the SMS Bits */
+ TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_SMS);
+ /* Select the Slave Mode */
+ TIMx->SMCR |= TIM_SlaveMode;
+}
+
+/**
+ * @brief Sets or Resets the TIMx Master/Slave Mode.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_MasterSlaveMode: specifies the Timer Master Slave Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_MasterSlaveMode_Enable: synchronization between the current timer
+ * and its slaves (through TRGO).
+ * @arg TIM_MasterSlaveMode_Disable: No action
+ * @retval None
+ */
+void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode));
+ /* Reset the MSM Bit */
+ TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_MSM);
+
+ /* Set or Reset the MSM Bit */
+ TIMx->SMCR |= TIM_MasterSlaveMode;
+}
+
+/**
+ * @brief Sets the TIMx Counter Register value
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param Counter: specifies the Counter register new value.
+ * @retval None
+ */
+void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ /* Set the Counter Register value */
+ TIMx->CNT = Counter;
+}
+
+/**
+ * @brief Sets the TIMx Autoreload Register value
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param Autoreload: specifies the Autoreload register new value.
+ * @retval None
+ */
+void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ /* Set the Autoreload Register value */
+ TIMx->ARR = Autoreload;
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare1 Register value
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param Compare1: specifies the Capture Compare1 register new value.
+ * @retval None
+ */
+void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ /* Set the Capture Compare1 Register value */
+ TIMx->CCR1 = Compare1;
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare2 Register value
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param Compare2: specifies the Capture Compare2 register new value.
+ * @retval None
+ */
+void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ /* Set the Capture Compare2 Register value */
+ TIMx->CCR2 = Compare2;
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare3 Register value
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param Compare3: specifies the Capture Compare3 register new value.
+ * @retval None
+ */
+void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* Set the Capture Compare3 Register value */
+ TIMx->CCR3 = Compare3;
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare4 Register value
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param Compare4: specifies the Capture Compare4 register new value.
+ * @retval None
+ */
+void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* Set the Capture Compare4 Register value */
+ TIMx->CCR4 = Compare4;
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 1 prescaler.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture1 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+ /* Reset the IC1PSC Bits */
+ TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC1PSC);
+ /* Set the IC1PSC value */
+ TIMx->CCMR1 |= TIM_ICPSC;
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 2 prescaler.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture2 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+ /* Reset the IC2PSC Bits */
+ TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC2PSC);
+ /* Set the IC2PSC value */
+ TIMx->CCMR1 |= (uint16_t)(TIM_ICPSC << 8);
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 3 prescaler.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture3 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+ /* Reset the IC3PSC Bits */
+ TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC3PSC);
+ /* Set the IC3PSC value */
+ TIMx->CCMR2 |= TIM_ICPSC;
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 4 prescaler.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+ /* Reset the IC4PSC Bits */
+ TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC4PSC);
+ /* Set the IC4PSC value */
+ TIMx->CCMR2 |= (uint16_t)(TIM_ICPSC << 8);
+}
+
+/**
+ * @brief Sets the TIMx Clock Division value.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select
+ * the TIM peripheral.
+ * @param TIM_CKD: specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CKD_DIV1: TDTS = Tck_tim
+ * @arg TIM_CKD_DIV2: TDTS = 2*Tck_tim
+ * @arg TIM_CKD_DIV4: TDTS = 4*Tck_tim
+ * @retval None
+ */
+void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ assert_param(IS_TIM_CKD_DIV(TIM_CKD));
+ /* Reset the CKD Bits */
+ TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_CKD);
+ /* Set the CKD value */
+ TIMx->CR1 |= TIM_CKD;
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 1 value.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @retval Capture Compare 1 Register value.
+ */
+uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+ /* Get the Capture 1 Register value */
+ return TIMx->CCR1;
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 2 value.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @retval Capture Compare 2 Register value.
+ */
+uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ /* Get the Capture 2 Register value */
+ return TIMx->CCR2;
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 3 value.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @retval Capture Compare 3 Register value.
+ */
+uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* Get the Capture 3 Register value */
+ return TIMx->CCR3;
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 4 value.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @retval Capture Compare 4 Register value.
+ */
+uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ /* Get the Capture 4 Register value */
+ return TIMx->CCR4;
+}
+
+/**
+ * @brief Gets the TIMx Counter value.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @retval Counter Register value.
+ */
+uint16_t TIM_GetCounter(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ /* Get the Counter Register value */
+ return TIMx->CNT;
+}
+
+/**
+ * @brief Gets the TIMx Prescaler value.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @retval Prescaler Register value.
+ */
+uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ /* Get the Prescaler Register value */
+ return TIMx->PSC;
+}
+
+/**
+ * @brief Checks whether the specified TIM flag is set or not.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_Update: TIM update Flag
+ * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag
+ * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag
+ * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag
+ * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag
+ * @arg TIM_FLAG_COM: TIM Commutation Flag
+ * @arg TIM_FLAG_Trigger: TIM Trigger Flag
+ * @arg TIM_FLAG_Break: TIM Break Flag
+ * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag
+ * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag
+ * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag
+ * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag
+ * @note
+ * - TIM6 and TIM7 can have only one update flag.
+ * - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1,
+ * TIM_FLAG_CC2 or TIM_FLAG_Trigger.
+ * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1.
+ * - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15.
+ * - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
+ * @retval The new state of TIM_FLAG (SET or RESET).
+ */
+FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG)
+{
+ ITStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_GET_FLAG(TIM_FLAG));
+
+ if ((TIMx->SR & TIM_FLAG) != (uint16_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the TIMx's pending flags.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_FLAG: specifies the flag bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_FLAG_Update: TIM update Flag
+ * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag
+ * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag
+ * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag
+ * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag
+ * @arg TIM_FLAG_COM: TIM Commutation Flag
+ * @arg TIM_FLAG_Trigger: TIM Trigger Flag
+ * @arg TIM_FLAG_Break: TIM Break Flag
+ * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag
+ * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag
+ * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag
+ * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag
+ * @note
+ * - TIM6 and TIM7 can have only one update flag.
+ * - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1,
+ * TIM_FLAG_CC2 or TIM_FLAG_Trigger.
+ * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1.
+ * - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15.
+ * - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
+ * @retval None
+ */
+void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_CLEAR_FLAG(TIM_FLAG));
+
+ /* Clear the flags */
+ TIMx->SR = (uint16_t)~TIM_FLAG;
+}
+
+/**
+ * @brief Checks whether the TIM interrupt has occurred or not.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_IT: specifies the TIM interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_Update: TIM update Interrupt source
+ * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
+ * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
+ * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
+ * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
+ * @arg TIM_IT_COM: TIM Commutation Interrupt source
+ * @arg TIM_IT_Trigger: TIM Trigger Interrupt source
+ * @arg TIM_IT_Break: TIM Break Interrupt source
+ * @note
+ * - TIM6 and TIM7 can generate only an update interrupt.
+ * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1,
+ * TIM_IT_CC2 or TIM_IT_Trigger.
+ * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1.
+ * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15.
+ * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
+ * @retval The new state of the TIM_IT(SET or RESET).
+ */
+ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint16_t itstatus = 0x0, itenable = 0x0;
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_GET_IT(TIM_IT));
+
+ itstatus = TIMx->SR & TIM_IT;
+
+ itenable = TIMx->DIER & TIM_IT;
+ if ((itstatus != (uint16_t)RESET) && (itenable != (uint16_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the TIMx's interrupt pending bits.
+ * @param TIMx: where x can be 1 to 17 to select the TIM peripheral.
+ * @param TIM_IT: specifies the pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_IT_Update: TIM1 update Interrupt source
+ * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
+ * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
+ * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
+ * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
+ * @arg TIM_IT_COM: TIM Commutation Interrupt source
+ * @arg TIM_IT_Trigger: TIM Trigger Interrupt source
+ * @arg TIM_IT_Break: TIM Break Interrupt source
+ * @note
+ * - TIM6 and TIM7 can generate only an update interrupt.
+ * - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1,
+ * TIM_IT_CC2 or TIM_IT_Trigger.
+ * - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1.
+ * - TIM_IT_Break is used only with TIM1, TIM8 and TIM15.
+ * - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.
+ * @retval None
+ */
+void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_IT(TIM_IT));
+ /* Clear the IT pending Bit */
+ TIMx->SR = (uint16_t)~TIM_IT;
+}
+
+/**
+ * @brief Configure the TI1 as Input.
+ * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr1 = 0, tmpccer = 0;
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC1E);
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+ /* Select the Input and set the filter */
+ tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC1F)));
+ tmpccmr1 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4));
+
+ if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+ (TIMx == TIM4) ||(TIMx == TIM5))
+ {
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P));
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E);
+ }
+ else
+ {
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P | TIM_CCER_CC1NP));
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E);
+ }
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI2 as Input.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr1 = 0, tmpccer = 0, tmp = 0;
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC2E);
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+ tmp = (uint16_t)(TIM_ICPolarity << 4);
+ /* Select the Input and set the filter */
+ tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC2S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC2F)));
+ tmpccmr1 |= (uint16_t)(TIM_ICFilter << 12);
+ tmpccmr1 |= (uint16_t)(TIM_ICSelection << 8);
+
+ if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+ (TIMx == TIM4) ||(TIMx == TIM5))
+ {
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P));
+ tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC2E);
+ }
+ else
+ {
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P | TIM_CCER_CC2NP));
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC2E);
+ }
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI3 as Input.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0;
+ /* Disable the Channel 3: Reset the CC3E Bit */
+ TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC3E);
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+ tmp = (uint16_t)(TIM_ICPolarity << 8);
+ /* Select the Input and set the filter */
+ tmpccmr2 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR2_CC3S)) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC3F)));
+ tmpccmr2 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4));
+
+ if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+ (TIMx == TIM4) ||(TIMx == TIM5))
+ {
+ /* Select the Polarity and set the CC3E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P));
+ tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC3E);
+ }
+ else
+ {
+ /* Select the Polarity and set the CC3E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC3NP));
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC3E);
+ }
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI4 as Input.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC4E);
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+ tmp = (uint16_t)(TIM_ICPolarity << 12);
+ /* Select the Input and set the filter */
+ tmpccmr2 &= (uint16_t)((uint16_t)(~(uint16_t)TIM_CCMR2_CC4S) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC4F)));
+ tmpccmr2 |= (uint16_t)(TIM_ICSelection << 8);
+ tmpccmr2 |= (uint16_t)(TIM_ICFilter << 12);
+
+ if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+ (TIMx == TIM4) ||(TIMx == TIM5))
+ {
+ /* Select the Polarity and set the CC4E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC4P));
+ tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC4E);
+ }
+ else
+ {
+ /* Select the Polarity and set the CC4E Bit */
+ tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC4NP));
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC4E);
+ }
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c
new file mode 100644
index 0000000..a3f16f1
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c
@@ -0,0 +1,1058 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_usart.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the USART firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_usart.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup USART
+ * @brief USART driver modules
+ * @{
+ */
+
+/** @defgroup USART_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_Defines
+ * @{
+ */
+
+#define CR1_UE_Set ((uint16_t)0x2000) /*!< USART Enable Mask */
+#define CR1_UE_Reset ((uint16_t)0xDFFF) /*!< USART Disable Mask */
+
+#define CR1_WAKE_Mask ((uint16_t)0xF7FF) /*!< USART WakeUp Method Mask */
+
+#define CR1_RWU_Set ((uint16_t)0x0002) /*!< USART mute mode Enable Mask */
+#define CR1_RWU_Reset ((uint16_t)0xFFFD) /*!< USART mute mode Enable Mask */
+#define CR1_SBK_Set ((uint16_t)0x0001) /*!< USART Break Character send Mask */
+#define CR1_CLEAR_Mask ((uint16_t)0xE9F3) /*!< USART CR1 Mask */
+#define CR2_Address_Mask ((uint16_t)0xFFF0) /*!< USART address Mask */
+
+#define CR2_LINEN_Set ((uint16_t)0x4000) /*!< USART LIN Enable Mask */
+#define CR2_LINEN_Reset ((uint16_t)0xBFFF) /*!< USART LIN Disable Mask */
+
+#define CR2_LBDL_Mask ((uint16_t)0xFFDF) /*!< USART LIN Break detection Mask */
+#define CR2_STOP_CLEAR_Mask ((uint16_t)0xCFFF) /*!< USART CR2 STOP Bits Mask */
+#define CR2_CLOCK_CLEAR_Mask ((uint16_t)0xF0FF) /*!< USART CR2 Clock Mask */
+
+#define CR3_SCEN_Set ((uint16_t)0x0020) /*!< USART SC Enable Mask */
+#define CR3_SCEN_Reset ((uint16_t)0xFFDF) /*!< USART SC Disable Mask */
+
+#define CR3_NACK_Set ((uint16_t)0x0010) /*!< USART SC NACK Enable Mask */
+#define CR3_NACK_Reset ((uint16_t)0xFFEF) /*!< USART SC NACK Disable Mask */
+
+#define CR3_HDSEL_Set ((uint16_t)0x0008) /*!< USART Half-Duplex Enable Mask */
+#define CR3_HDSEL_Reset ((uint16_t)0xFFF7) /*!< USART Half-Duplex Disable Mask */
+
+#define CR3_IRLP_Mask ((uint16_t)0xFFFB) /*!< USART IrDA LowPower mode Mask */
+#define CR3_CLEAR_Mask ((uint16_t)0xFCFF) /*!< USART CR3 Mask */
+
+#define CR3_IREN_Set ((uint16_t)0x0002) /*!< USART IrDA Enable Mask */
+#define CR3_IREN_Reset ((uint16_t)0xFFFD) /*!< USART IrDA Disable Mask */
+#define GTPR_LSB_Mask ((uint16_t)0x00FF) /*!< Guard Time Register LSB Mask */
+#define GTPR_MSB_Mask ((uint16_t)0xFF00) /*!< Guard Time Register MSB Mask */
+#define IT_Mask ((uint16_t)0x001F) /*!< USART Interrupt Mask */
+
+/* USART OverSampling-8 Mask */
+#define CR1_OVER8_Set ((u16)0x8000) /* USART OVER8 mode Enable Mask */
+#define CR1_OVER8_Reset ((u16)0x7FFF) /* USART OVER8 mode Disable Mask */
+
+/* USART One Bit Sampling Mask */
+#define CR3_ONEBITE_Set ((u16)0x0800) /* USART ONEBITE mode Enable Mask */
+#define CR3_ONEBITE_Reset ((u16)0xF7FF) /* USART ONEBITE mode Disable Mask */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the USARTx peripheral registers to their default reset values.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @retval None
+ */
+void USART_DeInit(USART_TypeDef* USARTx)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ if (USARTx == USART1)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE);
+ }
+ else if (USARTx == USART2)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE);
+ }
+ else if (USARTx == USART3)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE);
+ }
+ else if (USARTx == UART4)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE);
+ }
+ else
+ {
+ if (USARTx == UART5)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Initializes the USARTx peripheral according to the specified
+ * parameters in the USART_InitStruct .
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_InitStruct: pointer to a USART_InitTypeDef structure
+ * that contains the configuration information for the specified USART
+ * peripheral.
+ * @retval None
+ */
+void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct)
+{
+ uint32_t tmpreg = 0x00, apbclock = 0x00;
+ uint32_t integerdivider = 0x00;
+ uint32_t fractionaldivider = 0x00;
+ uint32_t usartxbase = 0;
+ RCC_ClocksTypeDef RCC_ClocksStatus;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate));
+ assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength));
+ assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits));
+ assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity));
+ assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode));
+ assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl));
+ /* The hardware flow control is available only for USART1, USART2 and USART3 */
+ if (USART_InitStruct->USART_HardwareFlowControl != USART_HardwareFlowControl_None)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ usartxbase = (uint32_t)USARTx;
+
+/*---------------------------- USART CR2 Configuration -----------------------*/
+ tmpreg = USARTx->CR2;
+ /* Clear STOP[13:12] bits */
+ tmpreg &= CR2_STOP_CLEAR_Mask;
+ /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/
+ /* Set STOP[13:12] bits according to USART_StopBits value */
+ tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits;
+
+ /* Write to USART CR2 */
+ USARTx->CR2 = (uint16_t)tmpreg;
+
+/*---------------------------- USART CR1 Configuration -----------------------*/
+ tmpreg = USARTx->CR1;
+ /* Clear M, PCE, PS, TE and RE bits */
+ tmpreg &= CR1_CLEAR_Mask;
+ /* Configure the USART Word Length, Parity and mode ----------------------- */
+ /* Set the M bits according to USART_WordLength value */
+ /* Set PCE and PS bits according to USART_Parity value */
+ /* Set TE and RE bits according to USART_Mode value */
+ tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity |
+ USART_InitStruct->USART_Mode;
+ /* Write to USART CR1 */
+ USARTx->CR1 = (uint16_t)tmpreg;
+
+/*---------------------------- USART CR3 Configuration -----------------------*/
+ tmpreg = USARTx->CR3;
+ /* Clear CTSE and RTSE bits */
+ tmpreg &= CR3_CLEAR_Mask;
+ /* Configure the USART HFC -------------------------------------------------*/
+ /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */
+ tmpreg |= USART_InitStruct->USART_HardwareFlowControl;
+ /* Write to USART CR3 */
+ USARTx->CR3 = (uint16_t)tmpreg;
+
+/*---------------------------- USART BRR Configuration -----------------------*/
+ /* Configure the USART Baud Rate -------------------------------------------*/
+ RCC_GetClocksFreq(&RCC_ClocksStatus);
+ if (usartxbase == USART1_BASE)
+ {
+ apbclock = RCC_ClocksStatus.PCLK2_Frequency;
+ }
+ else
+ {
+ apbclock = RCC_ClocksStatus.PCLK1_Frequency;
+ }
+
+ /* Determine the integer part */
+ if ((USARTx->CR1 & CR1_OVER8_Set) != 0)
+ {
+ /* Integer part computing in case Oversampling mode is 8 Samples */
+ integerdivider = ((25 * apbclock) / (2 * (USART_InitStruct->USART_BaudRate)));
+ }
+ else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */
+ {
+ /* Integer part computing in case Oversampling mode is 16 Samples */
+ integerdivider = ((25 * apbclock) / (4 * (USART_InitStruct->USART_BaudRate)));
+ }
+ tmpreg = (integerdivider / 100) << 4;
+
+ /* Determine the fractional part */
+ fractionaldivider = integerdivider - (100 * (tmpreg >> 4));
+
+ /* Implement the fractional part in the register */
+ if ((USARTx->CR1 & CR1_OVER8_Set) != 0)
+ {
+ tmpreg |= ((((fractionaldivider * 8) + 50) / 100)) & ((uint8_t)0x07);
+ }
+ else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */
+ {
+ tmpreg |= ((((fractionaldivider * 16) + 50) / 100)) & ((uint8_t)0x0F);
+ }
+
+ /* Write to USART BRR */
+ USARTx->BRR = (uint16_t)tmpreg;
+}
+
+/**
+ * @brief Fills each USART_InitStruct member with its default value.
+ * @param USART_InitStruct: pointer to a USART_InitTypeDef structure
+ * which will be initialized.
+ * @retval None
+ */
+void USART_StructInit(USART_InitTypeDef* USART_InitStruct)
+{
+ /* USART_InitStruct members default value */
+ USART_InitStruct->USART_BaudRate = 9600;
+ USART_InitStruct->USART_WordLength = USART_WordLength_8b;
+ USART_InitStruct->USART_StopBits = USART_StopBits_1;
+ USART_InitStruct->USART_Parity = USART_Parity_No ;
+ USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
+ USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+}
+
+/**
+ * @brief Initializes the USARTx peripheral Clock according to the
+ * specified parameters in the USART_ClockInitStruct .
+ * @param USARTx: where x can be 1, 2, 3 to select the USART peripheral.
+ * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef
+ * structure that contains the configuration information for the specified
+ * USART peripheral.
+ * @note The Smart Card and Synchronous modes are not available for UART4 and UART5.
+ * @retval None
+ */
+void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct)
+{
+ uint32_t tmpreg = 0x00;
+ /* Check the parameters */
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock));
+ assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL));
+ assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA));
+ assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit));
+
+/*---------------------------- USART CR2 Configuration -----------------------*/
+ tmpreg = USARTx->CR2;
+ /* Clear CLKEN, CPOL, CPHA and LBCL bits */
+ tmpreg &= CR2_CLOCK_CLEAR_Mask;
+ /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/
+ /* Set CLKEN bit according to USART_Clock value */
+ /* Set CPOL bit according to USART_CPOL value */
+ /* Set CPHA bit according to USART_CPHA value */
+ /* Set LBCL bit according to USART_LastBit value */
+ tmpreg |= (uint32_t)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL |
+ USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit;
+ /* Write to USART CR2 */
+ USARTx->CR2 = (uint16_t)tmpreg;
+}
+
+/**
+ * @brief Fills each USART_ClockInitStruct member with its default value.
+ * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct)
+{
+ /* USART_ClockInitStruct members default value */
+ USART_ClockInitStruct->USART_Clock = USART_Clock_Disable;
+ USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low;
+ USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge;
+ USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable;
+}
+
+/**
+ * @brief Enables or disables the specified USART peripheral.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USARTx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected USART by setting the UE bit in the CR1 register */
+ USARTx->CR1 |= CR1_UE_Set;
+ }
+ else
+ {
+ /* Disable the selected USART by clearing the UE bit in the CR1 register */
+ USARTx->CR1 &= CR1_UE_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the specified USART interrupts.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_IT: specifies the USART interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg USART_IT_LBD: LIN Break detection interrupt
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @param NewState: new state of the specified USARTx interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState)
+{
+ uint32_t usartreg = 0x00, itpos = 0x00, itmask = 0x00;
+ uint32_t usartxbase = 0x00;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_CONFIG_IT(USART_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ /* The CTS interrupt is not available for UART4 and UART5 */
+ if (USART_IT == USART_IT_CTS)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ usartxbase = (uint32_t)USARTx;
+
+ /* Get the USART register index */
+ usartreg = (((uint8_t)USART_IT) >> 0x05);
+
+ /* Get the interrupt position */
+ itpos = USART_IT & IT_Mask;
+ itmask = (((uint32_t)0x01) << itpos);
+
+ if (usartreg == 0x01) /* The IT is in CR1 register */
+ {
+ usartxbase += 0x0C;
+ }
+ else if (usartreg == 0x02) /* The IT is in CR2 register */
+ {
+ usartxbase += 0x10;
+ }
+ else /* The IT is in CR3 register */
+ {
+ usartxbase += 0x14;
+ }
+ if (NewState != DISABLE)
+ {
+ *(__IO uint32_t*)usartxbase |= itmask;
+ }
+ else
+ {
+ *(__IO uint32_t*)usartxbase &= ~itmask;
+ }
+}
+
+/**
+ * @brief Enables or disables the USARTs DMA interface.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_DMAReq: specifies the DMA request.
+ * This parameter can be any combination of the following values:
+ * @arg USART_DMAReq_Tx: USART DMA transmit request
+ * @arg USART_DMAReq_Rx: USART DMA receive request
+ * @param NewState: new state of the DMA Request sources.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note The DMA mode is not available for UART5 except in the STM32
+ * High density value line devices(STM32F10X_HD_VL).
+ * @retval None
+ */
+void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_DMAREQ(USART_DMAReq));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the DMA transfer for selected requests by setting the DMAT and/or
+ DMAR bits in the USART CR3 register */
+ USARTx->CR3 |= USART_DMAReq;
+ }
+ else
+ {
+ /* Disable the DMA transfer for selected requests by clearing the DMAT and/or
+ DMAR bits in the USART CR3 register */
+ USARTx->CR3 &= (uint16_t)~USART_DMAReq;
+ }
+}
+
+/**
+ * @brief Sets the address of the USART node.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_Address: Indicates the address of the USART node.
+ * @retval None
+ */
+void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_ADDRESS(USART_Address));
+
+ /* Clear the USART address */
+ USARTx->CR2 &= CR2_Address_Mask;
+ /* Set the USART address node */
+ USARTx->CR2 |= USART_Address;
+}
+
+/**
+ * @brief Selects the USART WakeUp method.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_WakeUp: specifies the USART wakeup method.
+ * This parameter can be one of the following values:
+ * @arg USART_WakeUp_IdleLine: WakeUp by an idle line detection
+ * @arg USART_WakeUp_AddressMark: WakeUp by an address mark
+ * @retval None
+ */
+void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_WAKEUP(USART_WakeUp));
+
+ USARTx->CR1 &= CR1_WAKE_Mask;
+ USARTx->CR1 |= USART_WakeUp;
+}
+
+/**
+ * @brief Determines if the USART is in mute mode or not.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USART mute mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the USART mute mode by setting the RWU bit in the CR1 register */
+ USARTx->CR1 |= CR1_RWU_Set;
+ }
+ else
+ {
+ /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */
+ USARTx->CR1 &= CR1_RWU_Reset;
+ }
+}
+
+/**
+ * @brief Sets the USART LIN Break detection length.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_LINBreakDetectLength: specifies the LIN break detection length.
+ * This parameter can be one of the following values:
+ * @arg USART_LINBreakDetectLength_10b: 10-bit break detection
+ * @arg USART_LINBreakDetectLength_11b: 11-bit break detection
+ * @retval None
+ */
+void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength));
+
+ USARTx->CR2 &= CR2_LBDL_Mask;
+ USARTx->CR2 |= USART_LINBreakDetectLength;
+}
+
+/**
+ * @brief Enables or disables the USARTs LIN mode.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USART LIN mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the LIN mode by setting the LINEN bit in the CR2 register */
+ USARTx->CR2 |= CR2_LINEN_Set;
+ }
+ else
+ {
+ /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */
+ USARTx->CR2 &= CR2_LINEN_Reset;
+ }
+}
+
+/**
+ * @brief Transmits single data through the USARTx peripheral.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param Data: the data to transmit.
+ * @retval None
+ */
+void USART_SendData(USART_TypeDef* USARTx, uint16_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_DATA(Data));
+
+ /* Transmit Data */
+ USARTx->DR = (Data & (uint16_t)0x01FF);
+}
+
+/**
+ * @brief Returns the most recent received data by the USARTx peripheral.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @retval The received data.
+ */
+uint16_t USART_ReceiveData(USART_TypeDef* USARTx)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ /* Receive Data */
+ return (uint16_t)(USARTx->DR & (uint16_t)0x01FF);
+}
+
+/**
+ * @brief Transmits break characters.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @retval None
+ */
+void USART_SendBreak(USART_TypeDef* USARTx)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ /* Send break characters */
+ USARTx->CR1 |= CR1_SBK_Set;
+}
+
+/**
+ * @brief Sets the specified USART guard time.
+ * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral.
+ * @param USART_GuardTime: specifies the guard time.
+ * @note The guard time bits are not available for UART4 and UART5.
+ * @retval None
+ */
+void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_123_PERIPH(USARTx));
+
+ /* Clear the USART Guard time */
+ USARTx->GTPR &= GTPR_LSB_Mask;
+ /* Set the USART guard time */
+ USARTx->GTPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08);
+}
+
+/**
+ * @brief Sets the system clock prescaler.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_Prescaler: specifies the prescaler clock.
+ * @note The function is used for IrDA mode with UART4 and UART5.
+ * @retval None
+ */
+void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ /* Clear the USART prescaler */
+ USARTx->GTPR &= GTPR_MSB_Mask;
+ /* Set the USART prescaler */
+ USARTx->GTPR |= USART_Prescaler;
+}
+
+/**
+ * @brief Enables or disables the USARTs Smart Card mode.
+ * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral.
+ * @param NewState: new state of the Smart Card mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note The Smart Card mode is not available for UART4 and UART5.
+ * @retval None
+ */
+void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the SC mode by setting the SCEN bit in the CR3 register */
+ USARTx->CR3 |= CR3_SCEN_Set;
+ }
+ else
+ {
+ /* Disable the SC mode by clearing the SCEN bit in the CR3 register */
+ USARTx->CR3 &= CR3_SCEN_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables NACK transmission.
+ * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral.
+ * @param NewState: new state of the NACK transmission.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note The Smart Card mode is not available for UART4 and UART5.
+ * @retval None
+ */
+void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the NACK transmission by setting the NACK bit in the CR3 register */
+ USARTx->CR3 |= CR3_NACK_Set;
+ }
+ else
+ {
+ /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */
+ USARTx->CR3 &= CR3_NACK_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the USARTs Half Duplex communication.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USART Communication.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */
+ USARTx->CR3 |= CR3_HDSEL_Set;
+ }
+ else
+ {
+ /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */
+ USARTx->CR3 &= CR3_HDSEL_Reset;
+ }
+}
+
+
+/**
+ * @brief Enables or disables the USART's 8x oversampling mode.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USART one bit sampling method.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note
+ * This function has to be called before calling USART_Init()
+ * function in order to have correct baudrate Divider value.
+ * @retval None
+ */
+void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the 8x Oversampling mode by setting the OVER8 bit in the CR1 register */
+ USARTx->CR1 |= CR1_OVER8_Set;
+ }
+ else
+ {
+ /* Disable the 8x Oversampling mode by clearing the OVER8 bit in the CR1 register */
+ USARTx->CR1 &= CR1_OVER8_Reset;
+ }
+}
+
+/**
+ * @brief Enables or disables the USART's one bit sampling method.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the USART one bit sampling method.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the one bit method by setting the ONEBITE bit in the CR3 register */
+ USARTx->CR3 |= CR3_ONEBITE_Set;
+ }
+ else
+ {
+ /* Disable tthe one bit method by clearing the ONEBITE bit in the CR3 register */
+ USARTx->CR3 &= CR3_ONEBITE_Reset;
+ }
+}
+
+/**
+ * @brief Configures the USART's IrDA interface.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_IrDAMode: specifies the IrDA mode.
+ * This parameter can be one of the following values:
+ * @arg USART_IrDAMode_LowPower
+ * @arg USART_IrDAMode_Normal
+ * @retval None
+ */
+void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_IRDA_MODE(USART_IrDAMode));
+
+ USARTx->CR3 &= CR3_IRLP_Mask;
+ USARTx->CR3 |= USART_IrDAMode;
+}
+
+/**
+ * @brief Enables or disables the USART's IrDA interface.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param NewState: new state of the IrDA mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the IrDA mode by setting the IREN bit in the CR3 register */
+ USARTx->CR3 |= CR3_IREN_Set;
+ }
+ else
+ {
+ /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */
+ USARTx->CR3 &= CR3_IREN_Reset;
+ }
+}
+
+/**
+ * @brief Checks whether the specified USART flag is set or not.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
+ * @arg USART_FLAG_LBD: LIN Break detection flag
+ * @arg USART_FLAG_TXE: Transmit data register empty flag
+ * @arg USART_FLAG_TC: Transmission Complete flag
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag
+ * @arg USART_FLAG_IDLE: Idle Line detection flag
+ * @arg USART_FLAG_ORE: OverRun Error flag
+ * @arg USART_FLAG_NE: Noise Error flag
+ * @arg USART_FLAG_FE: Framing Error flag
+ * @arg USART_FLAG_PE: Parity Error flag
+ * @retval The new state of USART_FLAG (SET or RESET).
+ */
+FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_FLAG(USART_FLAG));
+ /* The CTS flag is not available for UART4 and UART5 */
+ if (USART_FLAG == USART_FLAG_CTS)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ if ((USARTx->SR & USART_FLAG) != (uint16_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the USARTx's pending flags.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
+ * @arg USART_FLAG_LBD: LIN Break detection flag.
+ * @arg USART_FLAG_TC: Transmission Complete flag.
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note
+ * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register (USART_GetFlagStatus())
+ * followed by a read operation to USART_DR register (USART_ReceiveData()).
+ * - RXNE flag can be also cleared by a read to the USART_DR register
+ * (USART_ReceiveData()).
+ * - TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register (USART_GetFlagStatus()) followed by a write operation
+ * to USART_DR register (USART_SendData()).
+ * - TXE flag is cleared only by a write to the USART_DR register
+ * (USART_SendData()).
+ * @retval None
+ */
+void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_CLEAR_FLAG(USART_FLAG));
+ /* The CTS flag is not available for UART4 and UART5 */
+ if ((USART_FLAG & USART_FLAG_CTS) == USART_FLAG_CTS)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ USARTx->SR = (uint16_t)~USART_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified USART interrupt has occurred or not.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_IT: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg USART_IT_LBD: LIN Break detection interrupt
+ * @arg USART_IT_TXE: Tansmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ORE: OverRun Error interrupt
+ * @arg USART_IT_NE: Noise Error interrupt
+ * @arg USART_IT_FE: Framing Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of USART_IT (SET or RESET).
+ */
+ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT)
+{
+ uint32_t bitpos = 0x00, itmask = 0x00, usartreg = 0x00;
+ ITStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_GET_IT(USART_IT));
+ /* The CTS interrupt is not available for UART4 and UART5 */
+ if (USART_IT == USART_IT_CTS)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ /* Get the USART register index */
+ usartreg = (((uint8_t)USART_IT) >> 0x05);
+ /* Get the interrupt position */
+ itmask = USART_IT & IT_Mask;
+ itmask = (uint32_t)0x01 << itmask;
+
+ if (usartreg == 0x01) /* The IT is in CR1 register */
+ {
+ itmask &= USARTx->CR1;
+ }
+ else if (usartreg == 0x02) /* The IT is in CR2 register */
+ {
+ itmask &= USARTx->CR2;
+ }
+ else /* The IT is in CR3 register */
+ {
+ itmask &= USARTx->CR3;
+ }
+
+ bitpos = USART_IT >> 0x08;
+ bitpos = (uint32_t)0x01 << bitpos;
+ bitpos &= USARTx->SR;
+ if ((itmask != (uint16_t)RESET)&&(bitpos != (uint16_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the USARTx's interrupt pending bits.
+ * @param USARTx: Select the USART or the UART peripheral.
+ * This parameter can be one of the following values:
+ * USART1, USART2, USART3, UART4 or UART5.
+ * @param USART_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg USART_IT_LBD: LIN Break detection interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt.
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt.
+ *
+ * @note
+ * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) pending bits are cleared by
+ * software sequence: a read operation to USART_SR register
+ * (USART_GetITStatus()) followed by a read operation to USART_DR register
+ * (USART_ReceiveData()).
+ * - RXNE pending bit can be also cleared by a read to the USART_DR register
+ * (USART_ReceiveData()).
+ * - TC pending bit can be also cleared by software sequence: a read
+ * operation to USART_SR register (USART_GetITStatus()) followed by a write
+ * operation to USART_DR register (USART_SendData()).
+ * - TXE pending bit is cleared only by a write to the USART_DR register
+ * (USART_SendData()).
+ * @retval None
+ */
+void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT)
+{
+ uint16_t bitpos = 0x00, itmask = 0x00;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_CLEAR_IT(USART_IT));
+ /* The CTS interrupt is not available for UART4 and UART5 */
+ if (USART_IT == USART_IT_CTS)
+ {
+ assert_param(IS_USART_123_PERIPH(USARTx));
+ }
+
+ bitpos = USART_IT >> 0x08;
+ itmask = ((uint16_t)0x01 << (uint16_t)bitpos);
+ USARTx->SR = (uint16_t)~itmask;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c
new file mode 100644
index 0000000..77a7ce5
--- /dev/null
+++ b/china_devel_board/test001/libs/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c
@@ -0,0 +1,224 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_wwdg.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the WWDG firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_wwdg.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup WWDG
+ * @brief WWDG driver modules
+ * @{
+ */
+
+/** @defgroup WWDG_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Private_Defines
+ * @{
+ */
+
+/* ----------- WWDG registers bit address in the alias region ----------- */
+#define WWDG_OFFSET (WWDG_BASE - PERIPH_BASE)
+
+/* Alias word address of EWI bit */
+#define CFR_OFFSET (WWDG_OFFSET + 0x04)
+#define EWI_BitNumber 0x09
+#define CFR_EWI_BB (PERIPH_BB_BASE + (CFR_OFFSET * 32) + (EWI_BitNumber * 4))
+
+/* --------------------- WWDG registers bit mask ------------------------ */
+
+/* CR register bit mask */
+#define CR_WDGA_Set ((uint32_t)0x00000080)
+
+/* CFR register bit mask */
+#define CFR_WDGTB_Mask ((uint32_t)0xFFFFFE7F)
+#define CFR_W_Mask ((uint32_t)0xFFFFFF80)
+#define BIT_Mask ((uint8_t)0x7F)
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the WWDG peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void WWDG_DeInit(void)
+{
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE);
+}
+
+/**
+ * @brief Sets the WWDG Prescaler.
+ * @param WWDG_Prescaler: specifies the WWDG Prescaler.
+ * This parameter can be one of the following values:
+ * @arg WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1
+ * @arg WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2
+ * @arg WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4
+ * @arg WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8
+ * @retval None
+ */
+void WWDG_SetPrescaler(uint32_t WWDG_Prescaler)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler));
+ /* Clear WDGTB[1:0] bits */
+ tmpreg = WWDG->CFR & CFR_WDGTB_Mask;
+ /* Set WDGTB[1:0] bits according to WWDG_Prescaler value */
+ tmpreg |= WWDG_Prescaler;
+ /* Store the new value */
+ WWDG->CFR = tmpreg;
+}
+
+/**
+ * @brief Sets the WWDG window value.
+ * @param WindowValue: specifies the window value to be compared to the downcounter.
+ * This parameter value must be lower than 0x80.
+ * @retval None
+ */
+void WWDG_SetWindowValue(uint8_t WindowValue)
+{
+ __IO uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_WWDG_WINDOW_VALUE(WindowValue));
+ /* Clear W[6:0] bits */
+
+ tmpreg = WWDG->CFR & CFR_W_Mask;
+
+ /* Set W[6:0] bits according to WindowValue value */
+ tmpreg |= WindowValue & (uint32_t) BIT_Mask;
+
+ /* Store the new value */
+ WWDG->CFR = tmpreg;
+}
+
+/**
+ * @brief Enables the WWDG Early Wakeup interrupt(EWI).
+ * @param None
+ * @retval None
+ */
+void WWDG_EnableIT(void)
+{
+ *(__IO uint32_t *) CFR_EWI_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Sets the WWDG counter value.
+ * @param Counter: specifies the watchdog counter value.
+ * This parameter must be a number between 0x40 and 0x7F.
+ * @retval None
+ */
+void WWDG_SetCounter(uint8_t Counter)
+{
+ /* Check the parameters */
+ assert_param(IS_WWDG_COUNTER(Counter));
+ /* Write to T[6:0] bits to configure the counter value, no need to do
+ a read-modify-write; writing a 0 to WDGA bit does nothing */
+ WWDG->CR = Counter & BIT_Mask;
+}
+
+/**
+ * @brief Enables WWDG and load the counter value.
+ * @param Counter: specifies the watchdog counter value.
+ * This parameter must be a number between 0x40 and 0x7F.
+ * @retval None
+ */
+void WWDG_Enable(uint8_t Counter)
+{
+ /* Check the parameters */
+ assert_param(IS_WWDG_COUNTER(Counter));
+ WWDG->CR = CR_WDGA_Set | Counter;
+}
+
+/**
+ * @brief Checks whether the Early Wakeup interrupt flag is set or not.
+ * @param None
+ * @retval The new state of the Early Wakeup interrupt flag (SET or RESET)
+ */
+FlagStatus WWDG_GetFlagStatus(void)
+{
+ return (FlagStatus)(WWDG->SR);
+}
+
+/**
+ * @brief Clears Early Wakeup interrupt flag.
+ * @param None
+ * @retval None
+ */
+void WWDG_ClearFlag(void)
+{
+ WWDG->SR = (uint32_t)RESET;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/linker.ld b/china_devel_board/test001/linker.ld
new file mode 100644
index 0000000..d49a44a
--- /dev/null
+++ b/china_devel_board/test001/linker.ld
@@ -0,0 +1,162 @@
+ENTRY(Reset_Handler)
+
+MEMORY {
+ /*Adust in following line variable LENGTH to RAM size of target MCU*/
+ RAM (RWX) : ORIGIN = 0x20000000 , LENGTH = 20K
+ EXTSRAM (RWX) : ORIGIN = 0x68000000 , LENGTH = 0
+ /*Adust in following line variable LENGTH to (FLASH size - 2K) of target MCU*/
+ FLASH (RX) : ORIGIN = 0x08000000 , LENGTH = 126K
+ /*Adust in following line variable ORIGIN to (0x08000000 + FLASH size - 2K) of target MCU*/
+ EEMUL (RWX) : ORIGIN = 0x08000000+126K, LENGTH = 2K
+}
+
+_estack = ORIGIN(RAM)+LENGTH(RAM); /* end of the stack */
+_seemul = ORIGIN(EEMUL); /* start of the eeprom emulation area */
+_min_stack = 0x100; /* minimum stack space to reserve for the user app */
+
+/* check valid alignment for the vector table */
+ASSERT(ORIGIN(FLASH) == ALIGN(ORIGIN(FLASH), 0x80), "Start of memory region flash not aligned for startup vector table");
+
+SECTIONS {
+ /* vector table and program code goes into FLASH */
+ .text : {
+ . = ALIGN(0x80);
+ _isr_vectors_offs = . - 0x08000000;
+ KEEP(*(.isr_vectors))
+ . = ALIGN(4);
+ CREATE_OBJECT_SYMBOLS
+ *(.text .text.*)
+ } >FLASH
+
+ .rodata : ALIGN (4) {
+ *(.rodata .rodata.*)
+
+ . = ALIGN(4);
+ KEEP(*(.init))
+
+ . = ALIGN(4);
+ __preinit_array_start = .;
+ KEEP (*(.preinit_array))
+ __preinit_array_end = .;
+
+ . = ALIGN(4);
+ __init_array_start = .;
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array))
+ __init_array_end = .;
+
+ . = ALIGN(4);
+ KEEP(*(.fini))
+
+ . = ALIGN(4);
+ __fini_array_start = .;
+ KEEP (*(.fini_array))
+ KEEP (*(SORT(.fini_array.*)))
+ __fini_array_end = .;
+
+ *(.init .init.*)
+ *(.fini .fini.*)
+
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(.fini_array))
+ KEEP (*(SORT(.fini_array.*)))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ . = ALIGN (8);
+ *(.rom)
+ *(.rom.b)
+ _etext = .;
+ _sidata = _etext; /* exported for the startup function */
+ } >FLASH
+
+ /*
+ this data is expected by the program to be in ram
+ but we have to store it in the FLASH otherwise it
+ will get lost between resets, so the startup code
+ has to copy it into RAM before the program starts
+ */
+ .data : ALIGN (8) {
+ _sdata = . ; /* exported for the startup function */
+ . = ALIGN(4);
+ KEEP(*(.jcr))
+ *(.got.plt) *(.got)
+ *(.shdata)
+ *(.data .data.*)
+ . = ALIGN (8);
+ *(.ram)
+ *(.ramfunc*)
+ . = ALIGN(4);
+ _edata = . ; /* exported for the startup function */
+ } >RAM AT>FLASH
+
+ /* This is the uninitialized data section */
+ .bss (NOLOAD): {
+ . = ALIGN(4);
+ _sbss = . ; /* exported for the startup function */
+ *(.shbss)
+ *(.bss .bss.*)
+ *(COMMON)
+ . = ALIGN (8);
+ *(.ram.b)
+ . = ALIGN(4);
+ _ebss = . ; /* exported for the startup function */
+ _end = .;
+ __end = .;
+ } >RAM AT>FLASH
+ /* ensure there is enough room for the user stack */
+ ._usrstack (NOLOAD): {
+ . = ALIGN(4);
+ _susrstack = . ;
+ . = . + _min_stack ;
+ . = ALIGN(4);
+ _eusrstack = . ;
+ } >RAM
+
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ /* DWARF debug sections.
+ Symbols in the DWARF debugging sections are relative to the beginning
+ of the section so we begin them at 0. */
+ /* DWARF 1 */
+ .debug 0 : { *(.debug) }
+ .line 0 : { *(.line) }
+ /* GNU DWARF 1 extensions */
+ .debug_srcinfo 0 : { *(.debug_srcinfo) }
+ .debug_sfnames 0 : { *(.debug_sfnames) }
+ /* DWARF 1.1 and DWARF 2 */
+ .debug_aranges 0 : { *(.debug_aranges) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ /* DWARF 2 */
+ .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_frame 0 : { *(.debug_frame) }
+ .debug_str 0 : { *(.debug_str) }
+ .debug_loc 0 : { *(.debug_loc) }
+ .debug_macinfo 0 : { *(.debug_macinfo) }
+ /* SGI/MIPS DWARF 2 extensions */
+ .debug_weaknames 0 : { *(.debug_weaknames) }
+ .debug_funcnames 0 : { *(.debug_funcnames) }
+ .debug_typenames 0 : { *(.debug_typenames) }
+ .debug_varnames 0 : { *(.debug_varnames) }
+ /* DWARF 3 */
+ .debug_pubtypes 0 : { *(.debug_pubtypes) }
+ .debug_ranges 0 : { *(.debug_ranges) }
+
+ .ARM.attributes 0 : { KEEP (*(.ARM.attributes)) KEEP (*(.gnu.attributes)) }
+ .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
+ /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) }
+}
diff --git a/china_devel_board/test001/src/Makefile b/china_devel_board/test001/src/Makefile
new file mode 100644
index 0000000..69c039e
--- /dev/null
+++ b/china_devel_board/test001/src/Makefile
@@ -0,0 +1,22 @@
+include ../Makefile.common
+
+OBJS+=startup.o
+OBJS+=main.o
+OBJS+=serial.o
+OBJS+=spi.o
+OBJS+=stm32f10x_it.o
+OBJS+=periph_conf.o
+
+# OBJS+=keypins.o
+
+
+all: src
+
+src: app.a
+
+app.a: $(OBJS)
+ $(AR) cr app.a $(OBJS)
+
+.PHONY: src clean
+clean:
+ rm -f app.a $(OBJS)
diff --git a/china_devel_board/test001/src/main.c b/china_devel_board/test001/src/main.c
new file mode 100644
index 0000000..e4ec6e0
--- /dev/null
+++ b/china_devel_board/test001/src/main.c
@@ -0,0 +1,364 @@
+/**
+ ********************************************************
+ *
+ * Michas Test-main :D
+ *
+ ********************************************************
+ */
+
+#include "stm32f10x.h"
+// #include "stm32f10x_rcc.h"
+// #include "stm32f10x_gpio.h"
+// #include "stm32f10x_usart.h"
+// #include "stm32f10x_tim.h"
+#include "stm32f10x_conf.h"
+// #include "serial.h"
+#include "core_cm3.h"
+// #include "spi.h"
+#include "stm32f10x_it.h"
+#include "stm32_eval.h"
+#include <stdio.h>
+#include "newlib_stubs.c"
+#include "spi_conf.h"
+
+
+GPIO_InitTypeDef GPIO_InitStructure;
+NVIC_InitTypeDef NVIC_InitStructure;
+SPI_InitTypeDef SPI_InitStructure;
+USART_InitTypeDef USART_InitStructure;
+
+// /* Private function prototypes -----------------------------------------------*/
+// #ifdef __GNUC__
+// /* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf
+// set to 'Yes') calls __io_putchar() */
+// #define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
+// #else
+// #define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
+// #endif /* __GNUC__ */
+
+void diller_init_spi1(void);
+
+void SysTick_Handler(void);
+
+void disable_JTAG(void);
+
+void RCC_Configuration(void);
+
+void GPIO_Configuration(uint16_t SPIy_Mode, uint16_t SPIz_Mode);
+
+
+// MAIN ---------------------------------------------------------------------
+int main(int argc, char *argv[]) {
+
+ SystemInit();
+ disable_JTAG(); //disable JTAG to free GPIO ports
+
+
+
+
+// UART init
+
+// uinit(115200); // debug uart
+// uinit(31250); // midi baudrate
+
+// configure timer interval
+ SysTick_Config(16777215); // standard
+// SysTick_Config(7200000); // 10 Hz interrupt
+// SysTick_Config(720000); // 100 hz
+// SysTick_Config(72000); // 1000 hz
+
+// comm_puts("uart initialized\r\n");
+
+
+
+ // UART init the StdPeriphLib way
+
+
+// USART_InitStructure.USART_BaudRate = 115200;
+ USART_InitStructure.USART_BaudRate = 19200;
+ USART_InitStructure.USART_WordLength = USART_WordLength_8b;
+ USART_InitStructure.USART_StopBits = USART_StopBits_1;
+ USART_InitStructure.USART_Parity = USART_Parity_No;
+ USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+ USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
+
+ STM_EVAL_COMInit(COM1, &USART_InitStructure);
+ STM_EVAL_COMInit(COM2, &USART_InitStructure);
+
+// makes the uC freeze sadly ...
+// printf("\n\r This has been printed by printf!\n\r");
+
+
+ /* System clocks configuration ---------------------------------------------*/
+ RCC_Configuration();
+
+ /* 1st phase: SPIy Master and SPIz Slave */
+ /* GPIO configuration ------------------------------------------------------*/
+ GPIO_Configuration(SPI_Mode_Master, SPI_Mode_Master);
+
+
+ /* SPIy Config -------------------------------------------------------------*/
+ SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
+ SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
+ SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
+ SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
+ SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
+ SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
+// SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4;
+ SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_256;
+ SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_LSB;
+ SPI_InitStructure.SPI_CRCPolynomial = 7;
+ SPI_Init(SPIy, &SPI_InitStructure);
+
+ /* SPIz Config -------------------------------------------------------------*/
+// SPI_InitStructure.SPI_Mode = SPI_Mode_Slave;
+ // both master
+ SPI_Init(SPIz, &SPI_InitStructure);
+
+ /* Enable SPIy */
+ SPI_Cmd(SPIy, ENABLE);
+ /* Enable SPIz */
+ SPI_Cmd(SPIz, ENABLE);
+
+
+
+
+// diller_init_spi1();
+
+
+// spi_create(SPI1, GPIOA, GPIO_Pin_4); // (which spi?, which port, which softCS pin?)
+//spi_writeTwoBytes(0x12, 0x34);
+
+
+
+ // try the LED gpio stuff from the evaluation boards
+
+ STM_EVAL_LEDInit(LED1);
+ STM_EVAL_LEDInit(LED2);
+ STM_EVAL_LEDInit(LED3);
+ STM_EVAL_LEDInit(LED4);
+ STM_EVAL_LEDOn(LED2);
+ STM_EVAL_LEDOn(LED4);
+
+
+
+ USART_SendData(EVAL_COM1, (uint8_t) 'A');
+ USART_SendData(EVAL_COM1, (uint8_t) 'B');
+ USART_SendData(EVAL_COM1, (uint8_t) 'C');
+ USART_SendData(EVAL_COM2, (uint8_t) 'B');
+
+
+ return 0;
+
+
+}
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+void SysTick_Handler(void)
+{
+ static uint8_t character = 'A';
+// comm_puts("SysTick_Handler");
+// spi_writeTwoBytes(0x0F, 0xAB);
+ STM_EVAL_LEDToggle(LED1);
+ STM_EVAL_LEDToggle(LED2);
+ STM_EVAL_LEDToggle(LED3);
+ STM_EVAL_LEDToggle(LED4);
+
+ // send spi test data
+
+
+ SPI_I2S_SendData(SPIy, 0b10100101);
+ SPI_I2S_SendData(SPIz, 0b10100101);
+ uint8_t i;
+ for( i = 0; i<10; i++){
+ USART_SendData(EVAL_COM1, character);
+ /* Loop until the end of transmission */
+ while (USART_GetFlagStatus(EVAL_COM1, USART_FLAG_TC) == RESET)
+ {}
+ }
+ character++;
+
+ if (character > 'Z') {
+ character = 'A';
+ }
+}
+
+
+void disable_JTAG(void) {
+
+//DISABLE JTAG, Enable SWD
+ RCC_APB2PeriphClockCmd(
+ RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB | RCC_APB2Periph_AFIO,
+ ENABLE);
+ GPIO_PinRemapConfig(GPIO_Remap_SWJ_JTAGDisable, ENABLE); // Disable JTAG/SWD so pins are available
+
+}
+
+
+
+
+
+
+
+void diller_init_spi1(void) {
+
+
+
+RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_AFIO | RCC_APB2Periph_SPI1, ENABLE);
+
+GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5 | GPIO_Pin_7;
+GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+GPIO_Init(GPIOA, &GPIO_InitStructure);
+
+GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6;
+GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+GPIO_Init(GPIOA, &GPIO_InitStructure);
+
+GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4;
+GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
+GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+GPIO_Init(GPIOA, &GPIO_InitStructure);
+
+GPIO_WriteBit(GPIOA, GPIO_Pin_4, SET);
+
+NVIC_InitStructure.NVIC_IRQChannel = SPI1_IRQn;
+NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
+NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
+NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+NVIC_Init(&NVIC_InitStructure);
+
+// SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_32;
+SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_256;
+SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
+SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
+SPI_InitStructure.SPI_CRCPolynomial = 0;
+SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
+SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
+SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
+SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
+SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
+SPI_Init(SPI1, &SPI_InitStructure);
+
+SPI_I2S_ITConfig(SPI1, SPI_I2S_IT_RXNE, ENABLE);
+
+SPI_Cmd(SPI1, ENABLE);
+
+
+
+
+}
+
+void RCC_Configuration(void)
+{
+ /* PCLK2 = HCLK/2 */
+// RCC_PCLK2Config(RCC_HCLK_Div2); // bothers USART1, if deactivated makes spi faster
+
+/* Enable peripheral clocks --------------------------------------------------*/
+// #ifdef USE_STM3210C_EVAL
+// /* Enable GPIO clock for SPIy and SPIz */
+// RCC_APB2PeriphClockCmd(SPIy_GPIO_CLK | SPIz_GPIO_CLK | RCC_APB2Periph_AFIO, ENABLE);
+//
+// /* Enable SPIy Periph clock */
+// RCC_APB1PeriphClockCmd(SPIy_CLK, ENABLE);
+
+// #else
+ /* Enable SPIy clock and GPIO clock for SPIy and SPIz */
+ RCC_APB2PeriphClockCmd(SPIy_GPIO_CLK | SPIz_GPIO_CLK | SPIy_CLK, ENABLE);
+// #endif
+ /* Enable SPIz Periph clock */
+ RCC_APB1PeriphClockCmd(SPIz_CLK, ENABLE);
+}
+
+
+
+void GPIO_Configuration(uint16_t SPIy_Mode, uint16_t SPIz_Mode)
+{
+ GPIO_InitTypeDef GPIO_InitStructure;
+
+// #ifdef USE_STM3210C_EVAL
+// /* Enable SPI3 Pins Software Remapping */
+// GPIO_PinRemapConfig(GPIO_Remap_SPI3, ENABLE);
+// #endif
+
+ // if SPI1 be remapped
+// GPIO_PinRemapConfig(GPIO_Remap_SPI1, ENABLE);
+
+ /* Configure SPIy pins: SCK, MISO and MOSI ---------------------------------*/
+ GPIO_InitStructure.GPIO_Pin = SPIy_PIN_SCK | SPIy_PIN_MOSI;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+
+ if(SPIy_Mode == SPI_Mode_Master)
+ {
+ /* Configure SCK and MOSI pins as Alternate Function Push Pull */
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+ }
+ else
+ {
+ /* Configure SCK and MOSI pins as Input Floating */
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+ }
+ GPIO_Init(SPIy_GPIO, &GPIO_InitStructure);
+
+ GPIO_InitStructure.GPIO_Pin = SPIy_PIN_MISO;
+
+ if(SPIy_Mode == SPI_Mode_Master)
+ {
+ /* Configure MISO pin as Input Floating */
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+ }
+ else
+ {
+ /* Configure MISO pin as Alternate Function Push Pull */
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+ }
+ GPIO_Init(SPIy_GPIO, &GPIO_InitStructure);
+
+ /* Configure SPIz pins: SCK, MISO and MOSI ---------------------------------*/
+ GPIO_InitStructure.GPIO_Pin = SPIz_PIN_SCK | SPIz_PIN_MOSI;
+
+ if(SPIz_Mode == SPI_Mode_Slave)
+ {
+ /* Configure SCK and MOSI pins as Input Floating */
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+ }
+ else
+ {
+ /* Configure SCK and MOSI pins as Alternate Function Push Pull */
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+ }
+ GPIO_Init(SPIz_GPIO, &GPIO_InitStructure);
+
+ GPIO_InitStructure.GPIO_Pin = SPIz_PIN_MISO;
+ if(SPIz_Mode == SPI_Mode_Slave)
+ {
+ /* Configure MISO pin as Alternate Function Push Pull */
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+ }
+ else
+ { /* Configure MISO pin as Input Floating */
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+ }
+ GPIO_Init(SPIz_GPIO, &GPIO_InitStructure);
+}
\ No newline at end of file
diff --git a/china_devel_board/test001/src/newlib_stubs.c b/china_devel_board/test001/src/newlib_stubs.c
new file mode 100644
index 0000000..82799a8
--- /dev/null
+++ b/china_devel_board/test001/src/newlib_stubs.c
@@ -0,0 +1,277 @@
+/*
+ * newlib_stubs.c
+ *
+ * Created on: 2 Nov 2010
+ * Author: nanoage.co.uk
+ */
+#include <errno.h>
+#include <sys/stat.h>
+#include <sys/times.h>
+#include <sys/unistd.h>
+#include "stm32f10x_usart.h"
+
+
+#ifndef STDOUT_USART
+#define STDOUT_USART 1
+#endif
+
+#ifndef STDERR_USART
+#define STDERR_USART 1
+#endif
+
+#ifndef STDIN_USART
+#define STDIN_USART 1
+#endif
+
+#undef errno
+extern int errno;
+
+/*
+ environ
+ A pointer to a list of environment variables and their values.
+ For a minimal environment, this empty list is adequate:
+ */
+char *__env[1] = { 0 };
+char **environ = __env;
+
+int _write(int file, char *ptr, int len);
+
+void _exit(int status) {
+ _write(1, "exit", 4);
+ while (1) {
+ ;
+ }
+}
+
+int _close(int file) {
+ return -1;
+}
+/*
+ execve
+ Transfer control to a new process. Minimal implementation (for a system without processes):
+ */
+int _execve(char *name, char **argv, char **env) {
+ errno = ENOMEM;
+ return -1;
+}
+/*
+ fork
+ Create a new process. Minimal implementation (for a system without processes):
+ */
+
+int _fork() {
+ errno = EAGAIN;
+ return -1;
+}
+/*
+ fstat
+ Status of an open file. For consistency with other minimal implementations in these examples,
+ all files are regarded as character special devices.
+ The `sys/stat.h' header file required is distributed in the `include' subdirectory for this C library.
+ */
+int _fstat(int file, struct stat *st) {
+ st->st_mode = S_IFCHR;
+ return 0;
+}
+
+/*
+ getpid
+ Process-ID; this is sometimes used to generate strings unlikely to conflict with other processes. Minimal implementation, for a system without processes:
+ */
+
+int _getpid() {
+ return 1;
+}
+
+/*
+ isatty
+ Query whether output stream is a terminal. For consistency with the other minimal implementations,
+ */
+int _isatty(int file) {
+ switch (file){
+ case STDOUT_FILENO:
+ case STDERR_FILENO:
+ case STDIN_FILENO:
+ return 1;
+ default:
+ //errno = ENOTTY;
+ errno = EBADF;
+ return 0;
+ }
+}
+
+
+/*
+ kill
+ Send a signal. Minimal implementation:
+ */
+int _kill(int pid, int sig) {
+ errno = EINVAL;
+ return (-1);
+}
+
+/*
+ link
+ Establish a new name for an existing file. Minimal implementation:
+ */
+
+int _link(char *old, char *new) {
+ errno = EMLINK;
+ return -1;
+}
+
+/*
+ lseek
+ Set position in a file. Minimal implementation:
+ */
+int _lseek(int file, int ptr, int dir) {
+ return 0;
+}
+
+/*
+ sbrk
+ Increase program data space.
+ Malloc and related functions depend on this
+ */
+caddr_t _sbrk(int incr) {
+
+ extern char _ebss; // Defined by the linker
+ static char *heap_end;
+ char *prev_heap_end;
+
+ if (heap_end == 0) {
+ heap_end = &_ebss;
+ }
+ prev_heap_end = heap_end;
+
+char * stack = (char*) __get_MSP();
+ if (heap_end + incr > stack)
+ {
+ _write (STDERR_FILENO, "Heap and stack collision\n", 25);
+ errno = ENOMEM;
+ return (caddr_t) -1;
+ //abort ();
+ }
+
+ heap_end += incr;
+ return (caddr_t) prev_heap_end;
+
+}
+
+/*
+ read
+ Read a character to a file. `libc' subroutines will use this system routine for input from all files, including stdin
+ Returns -1 on error or blocks until the number of characters have been read.
+ */
+
+
+int _read(int file, char *ptr, int len) {
+ int n;
+ int num = 0;
+ switch (file) {
+ case STDIN_FILENO:
+ for (n = 0; n < len; n++) {
+#if STDIN_USART == 1
+ while ((USART1->SR & USART_FLAG_RXNE) == (uint16_t)RESET) {}
+ char c = (char)(USART1->DR & (uint16_t)0x01FF);
+#elif STDIN_USART == 2
+ while ((USART2->SR & USART_FLAG_RXNE) == (uint16_t) RESET) {}
+ char c = (char) (USART2->DR & (uint16_t) 0x01FF);
+#elif STDIN_USART == 3
+ while ((USART3->SR & USART_FLAG_RXNE) == (uint16_t)RESET) {}
+ char c = (char)(USART3->DR & (uint16_t)0x01FF);
+#endif
+ *ptr++ = c;
+ num++;
+ }
+ break;
+ default:
+ errno = EBADF;
+ return -1;
+ }
+ return num;
+}
+
+/*
+ stat
+ Status of a file (by name). Minimal implementation:
+ int _EXFUN(stat,( const char *__path, struct stat *__sbuf ));
+ */
+
+int _stat(const char *filepath, struct stat *st) {
+ st->st_mode = S_IFCHR;
+ return 0;
+}
+
+/*
+ times
+ Timing information for current process. Minimal implementation:
+ */
+
+clock_t _times(struct tms *buf) {
+ return -1;
+}
+
+/*
+ unlink
+ Remove a file's directory entry. Minimal implementation:
+ */
+int _unlink(char *name) {
+ errno = ENOENT;
+ return -1;
+}
+
+/*
+ wait
+ Wait for a child process. Minimal implementation:
+ */
+int _wait(int *status) {
+ errno = ECHILD;
+ return -1;
+}
+
+/*
+ write
+ Write a character to a file. `libc' subroutines will use this system routine for output to all files, including stdout
+ Returns -1 on error or number of bytes sent
+ */
+int _write(int file, char *ptr, int len) {
+ int n;
+ switch (file) {
+ case STDOUT_FILENO: /*stdout*/
+ for (n = 0; n < len; n++) {
+#if STDOUT_USART == 1
+// while ((USART1->SR & USART_FLAG_TC) == (uint16_t)RESET) {}
+// USART1->DR = (*ptr++ & (uint16_t)0x01FF);
+
+#elif STDOUT_USART == 2
+ while ((USART2->SR & USART_FLAG_TC) == (uint16_t) RESET) {
+ }
+ USART2->DR = (*ptr++ & (uint16_t) 0x01FF);
+#elif STDOUT_USART == 3
+ while ((USART3->SR & USART_FLAG_TC) == (uint16_t)RESET) {}
+ USART3->DR = (*ptr++ & (uint16_t)0x01FF);
+#endif
+ }
+ break;
+ case STDERR_FILENO: /* stderr */
+ for (n = 0; n < len; n++) {
+#if STDERR_USART == 1
+ while ((USART1->SR & USART_FLAG_TC) == (uint16_t)RESET) {}
+ USART1->DR = (*ptr++ & (uint16_t)0x01FF);
+#elif STDERR_USART == 2
+ while ((USART2->SR & USART_FLAG_TC) == (uint16_t) RESET) {
+ }
+ USART2->DR = (*ptr++ & (uint16_t) 0x01FF);
+#elif STDERR_USART == 3
+ while ((USART3->SR & USART_FLAG_TC) == (uint16_t)RESET) {}
+ USART3->DR = (*ptr++ & (uint16_t)0x01FF);
+#endif
+ }
+ break;
+ default:
+ errno = EBADF;
+ return -1;
+ }
+ return len;
+}
diff --git a/china_devel_board/test001/src/periph_conf.c b/china_devel_board/test001/src/periph_conf.c
new file mode 100644
index 0000000..acbed60
--- /dev/null
+++ b/china_devel_board/test001/src/periph_conf.c
@@ -0,0 +1,764 @@
+//modified by micha
+
+/**
+ ******************************************************************************
+ * @file stm32100e_eval.c
+ * @author MCD Application Team
+ * @version V4.5.0
+ * @date 07-March-2011
+ * @brief This file provides
+ * - set of firmware functions to manage Leds, push-button and COM ports
+ * - low level initialization functions for SD card (on SDIO), SPI serial
+ * flash (sFLASH) and temperature sensor (LM75)
+ * available on STM32100E-EVAL evaluation board from STMicroelectronics.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "periph_conf.h"
+#include "stm32f10x_spi.h"
+#include "stm32f10x_i2c.h"
+#include "stm32f10x_dma.h"
+
+/** @addtogroup Utilities
+ * @{
+ */
+
+/** @addtogroup STM32_EVAL
+ * @{
+ */
+
+/** @addtogroup STM32100E_EVAL
+ * @{
+ */
+
+/** @defgroup STM32100E_EVAL_LOW_LEVEL
+ * @brief This file provides firmware functions to manage Leds, push-buttons,
+ * COM ports, SD card on SDIO, serial flash (sFLASH), serial EEPROM (sEE)
+ * and temperature sensor (LM75) available on STM32100E-EVAL evaluation
+ * board from STMicroelectronics.
+ * @{
+ */
+
+/** @defgroup STM32100E_EVAL_LOW_LEVEL_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup STM32100E_EVAL_LOW_LEVEL_Private_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup STM32100E_EVAL_LOW_LEVEL_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup STM32100E_EVAL_LOW_LEVEL_Private_Variables
+ * @{
+ */
+GPIO_TypeDef* GPIO_PORT[LEDn] = {LED1_GPIO_PORT, LED2_GPIO_PORT, LED3_GPIO_PORT,
+ LED4_GPIO_PORT};
+const uint16_t GPIO_PIN[LEDn] = {LED1_PIN, LED2_PIN, LED3_PIN,
+ LED4_PIN};
+const uint32_t GPIO_CLK[LEDn] = {LED1_GPIO_CLK, LED2_GPIO_CLK, LED3_GPIO_CLK,
+ LED4_GPIO_CLK};
+
+GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {WAKEUP_BUTTON_GPIO_PORT, TAMPER_BUTTON_GPIO_PORT,
+ KEY_BUTTON_GPIO_PORT, RIGHT_BUTTON_GPIO_PORT,
+ LEFT_BUTTON_GPIO_PORT, UP_BUTTON_GPIO_PORT,
+ DOWN_BUTTON_GPIO_PORT, SEL_BUTTON_GPIO_PORT};
+
+const uint16_t BUTTON_PIN[BUTTONn] = {WAKEUP_BUTTON_PIN, TAMPER_BUTTON_PIN,
+ KEY_BUTTON_PIN, RIGHT_BUTTON_PIN,
+ LEFT_BUTTON_PIN, UP_BUTTON_PIN,
+ DOWN_BUTTON_PIN, SEL_BUTTON_PIN};
+
+const uint32_t BUTTON_CLK[BUTTONn] = {WAKEUP_BUTTON_GPIO_CLK, TAMPER_BUTTON_GPIO_CLK,
+ KEY_BUTTON_GPIO_CLK, RIGHT_BUTTON_GPIO_CLK,
+ LEFT_BUTTON_GPIO_CLK, UP_BUTTON_GPIO_CLK,
+ DOWN_BUTTON_GPIO_CLK, SEL_BUTTON_GPIO_CLK};
+
+const uint16_t BUTTON_EXTI_LINE[BUTTONn] = {WAKEUP_BUTTON_EXTI_LINE,
+ TAMPER_BUTTON_EXTI_LINE,
+ KEY_BUTTON_EXTI_LINE,
+ RIGHT_BUTTON_EXTI_LINE,
+ LEFT_BUTTON_EXTI_LINE,
+ UP_BUTTON_EXTI_LINE,
+ DOWN_BUTTON_EXTI_LINE,
+ SEL_BUTTON_EXTI_LINE};
+
+const uint16_t BUTTON_PORT_SOURCE[BUTTONn] = {WAKEUP_BUTTON_EXTI_PORT_SOURCE,
+ TAMPER_BUTTON_EXTI_PORT_SOURCE,
+ KEY_BUTTON_EXTI_PORT_SOURCE,
+ RIGHT_BUTTON_EXTI_PORT_SOURCE,
+ LEFT_BUTTON_EXTI_PORT_SOURCE,
+ UP_BUTTON_EXTI_PORT_SOURCE,
+ DOWN_BUTTON_EXTI_PORT_SOURCE,
+ SEL_BUTTON_EXTI_PORT_SOURCE};
+
+const uint16_t BUTTON_PIN_SOURCE[BUTTONn] = {WAKEUP_BUTTON_EXTI_PIN_SOURCE,
+ TAMPER_BUTTON_EXTI_PIN_SOURCE,
+ KEY_BUTTON_EXTI_PIN_SOURCE,
+ RIGHT_BUTTON_EXTI_PIN_SOURCE,
+ LEFT_BUTTON_EXTI_PIN_SOURCE,
+ UP_BUTTON_EXTI_PIN_SOURCE,
+ DOWN_BUTTON_EXTI_PIN_SOURCE,
+ SEL_BUTTON_EXTI_PIN_SOURCE};
+
+const uint16_t BUTTON_IRQn[BUTTONn] = {WAKEUP_BUTTON_EXTI_IRQn, TAMPER_BUTTON_EXTI_IRQn,
+ KEY_BUTTON_EXTI_IRQn, RIGHT_BUTTON_EXTI_IRQn,
+ LEFT_BUTTON_EXTI_IRQn, UP_BUTTON_EXTI_IRQn,
+ DOWN_BUTTON_EXTI_IRQn, SEL_BUTTON_EXTI_IRQn};
+
+USART_TypeDef* COM_USART[COMn] = {EVAL_COM1, EVAL_COM2};
+
+GPIO_TypeDef* COM_TX_PORT[COMn] = {EVAL_COM1_TX_GPIO_PORT, EVAL_COM2_TX_GPIO_PORT};
+
+GPIO_TypeDef* COM_RX_PORT[COMn] = {EVAL_COM1_RX_GPIO_PORT, EVAL_COM2_RX_GPIO_PORT};
+
+const uint32_t COM_USART_CLK[COMn] = {EVAL_COM1_CLK, EVAL_COM2_CLK};
+
+const uint32_t COM_TX_PORT_CLK[COMn] = {EVAL_COM1_TX_GPIO_CLK, EVAL_COM2_TX_GPIO_CLK};
+
+const uint32_t COM_RX_PORT_CLK[COMn] = {EVAL_COM1_RX_GPIO_CLK, EVAL_COM2_RX_GPIO_CLK};
+
+const uint16_t COM_TX_PIN[COMn] = {EVAL_COM1_TX_PIN, EVAL_COM2_TX_PIN};
+
+const uint16_t COM_RX_PIN[COMn] = {EVAL_COM1_RX_PIN, EVAL_COM2_RX_PIN};
+
+DMA_InitTypeDef sEEDMA_InitStructure;
+
+/**
+ * @}
+ */
+
+
+/** @defgroup STM32100E_EVAL_LOW_LEVEL_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup STM32100E_EVAL_LOW_LEVEL_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Configures LED GPIO.
+ * @param Led: Specifies the Led to be configured.
+ * This parameter can be one of following parameters:
+ * @arg LED1
+ * @arg LED2
+ * @arg LED3
+ * @arg LED4
+ * @retval None
+ */
+void STM_EVAL_LEDInit(Led_TypeDef Led)
+{
+ GPIO_InitTypeDef GPIO_InitStructure;
+
+ /* Enable the GPIO_LED Clock */
+ RCC_APB2PeriphClockCmd(GPIO_CLK[Led], ENABLE);
+
+ /* Configure the GPIO_LED pin */
+ GPIO_InitStructure.GPIO_Pin = GPIO_PIN[Led];
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+
+ GPIO_Init(GPIO_PORT[Led], &GPIO_InitStructure);
+}
+
+/**
+ * @brief Turns selected LED On.
+ * @param Led: Specifies the Led to be set on.
+ * This parameter can be one of following parameters:
+ * @arg LED1
+ * @arg LED2
+ * @arg LED3
+ * @arg LED4
+ * @retval None
+ */
+void STM_EVAL_LEDOn(Led_TypeDef Led)
+{
+ GPIO_PORT[Led]->BSRR = GPIO_PIN[Led];
+}
+
+/**
+ * @brief Turns selected LED Off.
+ * @param Led: Specifies the Led to be set off.
+ * This parameter can be one of following parameters:
+ * @arg LED1
+ * @arg LED2
+ * @arg LED3
+ * @arg LED4
+ * @retval None
+ */
+void STM_EVAL_LEDOff(Led_TypeDef Led)
+{
+ GPIO_PORT[Led]->BRR = GPIO_PIN[Led];
+}
+
+/**
+ * @brief Toggles the selected LED.
+ * @param Led: Specifies the Led to be toggled.
+ * This parameter can be one of following parameters:
+ * @arg LED1
+ * @arg LED2
+ * @arg LED3
+ * @arg LED4
+ * @retval None
+ */
+void STM_EVAL_LEDToggle(Led_TypeDef Led)
+{
+ GPIO_PORT[Led]->ODR ^= GPIO_PIN[Led];
+}
+
+/**
+ * @brief Configures Button GPIO and EXTI Line.
+ * @param Button: Specifies the Button to be configured.
+ * This parameter can be one of following parameters:
+ * @arg BUTTON_WAKEUP: Wakeup Push Button
+ * @arg BUTTON_TAMPER: Tamper Push Button
+ * @arg BUTTON_KEY: Key Push Button
+ * @arg BUTTON_RIGHT: Joystick Right Push Button
+ * @arg BUTTON_LEFT: Joystick Left Push Button
+ * @arg BUTTON_UP: Joystick Up Push Button
+ * @arg BUTTON_DOWN: Joystick Down Push Button
+ * @arg BUTTON_SEL: Joystick Sel Push Button
+ * @param Button_Mode: Specifies Button mode.
+ * This parameter can be one of following parameters:
+ * @arg BUTTON_MODE_GPIO: Button will be used as simple IO
+ * @arg BUTTON_MODE_EXTI: Button will be connected to EXTI line with interrupt
+ * generation capability
+ * @retval None
+ */
+void STM_EVAL_PBInit(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode)
+{
+ GPIO_InitTypeDef GPIO_InitStructure;
+ EXTI_InitTypeDef EXTI_InitStructure;
+ NVIC_InitTypeDef NVIC_InitStructure;
+
+ /* Enable the BUTTON Clock */
+ RCC_APB2PeriphClockCmd(BUTTON_CLK[Button] | RCC_APB2Periph_AFIO, ENABLE);
+
+ /* Configure Button pin as input floating */
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+ GPIO_InitStructure.GPIO_Pin = BUTTON_PIN[Button];
+ GPIO_Init(BUTTON_PORT[Button], &GPIO_InitStructure);
+
+
+ if (Button_Mode == BUTTON_MODE_EXTI)
+ {
+ /* Connect Button EXTI Line to Button GPIO Pin */
+ GPIO_EXTILineConfig(BUTTON_PORT_SOURCE[Button], BUTTON_PIN_SOURCE[Button]);
+
+ /* Configure Button EXTI line */
+ EXTI_InitStructure.EXTI_Line = BUTTON_EXTI_LINE[Button];
+ EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
+
+ if(Button != BUTTON_WAKEUP)
+ {
+ EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;
+ }
+ else
+ {
+ EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
+ }
+ EXTI_InitStructure.EXTI_LineCmd = ENABLE;
+ EXTI_Init(&EXTI_InitStructure);
+
+ /* Enable and set Button EXTI Interrupt to the lowest priority */
+ NVIC_InitStructure.NVIC_IRQChannel = BUTTON_IRQn[Button];
+ NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x0F;
+ NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x0F;
+ NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+
+ NVIC_Init(&NVIC_InitStructure);
+ }
+}
+
+/**
+ * @brief Returns the selected Button state.
+ * @param Button: Specifies the Button to be checked.
+ * This parameter can be one of following parameters:
+ * @arg BUTTON_WAKEUP: Wakeup Push Button
+ * @arg BUTTON_TAMPER: Tamper Push Button
+ * @arg BUTTON_KEY: Key Push Button
+ * @arg BUTTON_RIGHT: Joystick Right Push Button
+ * @arg BUTTON_LEFT: Joystick Left Push Button
+ * @arg BUTTON_UP: Joystick Up Push Button
+ * @arg BUTTON_DOWN: Joystick Down Push Button
+ * @arg BUTTON_SEL: Joystick Sel Push Button
+ * @retval The Button GPIO pin value.
+ */
+uint32_t STM_EVAL_PBGetState(Button_TypeDef Button)
+{
+ return GPIO_ReadInputDataBit(BUTTON_PORT[Button], BUTTON_PIN[Button]);
+}
+
+/**
+ * @brief Configures COM port.
+ * @param COM: Specifies the COM port to be configured.
+ * This parameter can be one of following parameters:
+ * @arg COM1
+ * @arg COM2
+ * @param USART_InitStruct: pointer to a USART_InitTypeDef structure that
+ * contains the configuration information for the specified USART peripheral.
+ * @retval None
+ */
+void STM_EVAL_COMInit(COM_TypeDef COM, USART_InitTypeDef* USART_InitStruct)
+{
+ GPIO_InitTypeDef GPIO_InitStructure;
+
+ /* Enable GPIO clock */
+ RCC_APB2PeriphClockCmd(COM_TX_PORT_CLK[COM] | COM_RX_PORT_CLK[COM] | RCC_APB2Periph_AFIO, ENABLE);
+
+ /* Enable UART clock */
+ if (COM == COM1)
+ {
+ RCC_APB2PeriphClockCmd(COM_USART_CLK[COM], ENABLE);
+ }
+ else
+ {
+ RCC_APB1PeriphClockCmd(COM_USART_CLK[COM], ENABLE);
+ }
+
+ /* Configure USART Tx as alternate function push-pull */
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+ GPIO_InitStructure.GPIO_Pin = COM_TX_PIN[COM];
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+ GPIO_Init(COM_TX_PORT[COM], &GPIO_InitStructure);
+
+ /* Configure USART Rx as input floating */
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+ GPIO_InitStructure.GPIO_Pin = COM_RX_PIN[COM];
+ GPIO_Init(COM_RX_PORT[COM], &GPIO_InitStructure);
+
+ /* USART configuration */
+ USART_Init(COM_USART[COM], USART_InitStruct);
+
+ /* Enable USART */
+ USART_Cmd(COM_USART[COM], ENABLE);
+}
+
+/**
+ * @brief DeInitializes the SD/SD communication.
+ * @param None
+ * @retval None
+ */
+void SD_LowLevel_DeInit(void)
+{
+ GPIO_InitTypeDef GPIO_InitStructure;
+
+ SPI_Cmd(SD_SPI, DISABLE); /*!< SD_SPI disable */
+ SPI_I2S_DeInit(SD_SPI); /*!< DeInitializes the SD_SPI */
+
+ /*!< SD_SPI Periph clock disable */
+ RCC_APB1PeriphClockCmd(SD_SPI_CLK, DISABLE);
+
+ /*!< Configure SD_SPI pins: SCK */
+ GPIO_InitStructure.GPIO_Pin = SD_SPI_SCK_PIN;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+ GPIO_Init(SD_SPI_SCK_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure SD_SPI pins: MISO */
+ GPIO_InitStructure.GPIO_Pin = SD_SPI_MISO_PIN;
+ GPIO_Init(SD_SPI_MISO_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure SD_SPI pins: MOSI */
+ GPIO_InitStructure.GPIO_Pin = SD_SPI_MOSI_PIN;
+ GPIO_Init(SD_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure SD_SPI_CS_PIN pin: SD Card CS pin */
+ GPIO_InitStructure.GPIO_Pin = SD_CS_PIN;
+ GPIO_Init(SD_CS_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure SD_SPI_DETECT_PIN pin: SD Card detect pin */
+ GPIO_InitStructure.GPIO_Pin = SD_DETECT_PIN;
+ GPIO_Init(SD_DETECT_GPIO_PORT, &GPIO_InitStructure);
+}
+
+/**
+ * @brief Initializes the SD_SPI and CS pins.
+ * @param None
+ * @retval None
+ */
+void SD_LowLevel_Init(void)
+{
+ GPIO_InitTypeDef GPIO_InitStructure;
+ SPI_InitTypeDef SPI_InitStructure;
+
+ /*!< SD_SPI_CS_GPIO, SD_SPI_MOSI_GPIO, SD_SPI_MISO_GPIO, SD_SPI_DETECT_GPIO
+ and SD_SPI_SCK_GPIO Periph clock enable */
+ RCC_APB2PeriphClockCmd(SD_CS_GPIO_CLK | SD_SPI_MOSI_GPIO_CLK | SD_SPI_MISO_GPIO_CLK |
+ SD_SPI_SCK_GPIO_CLK | SD_DETECT_GPIO_CLK, ENABLE);
+
+ /*!< SD_SPI Periph clock enable */
+ RCC_APB1PeriphClockCmd(SD_SPI_CLK, ENABLE);
+
+ /*!< Configure SD_SPI pins: SCK */
+ GPIO_InitStructure.GPIO_Pin = SD_SPI_SCK_PIN;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+ GPIO_Init(SD_SPI_SCK_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure SD_SPI pins: MOSI */
+ GPIO_InitStructure.GPIO_Pin = SD_SPI_MOSI_PIN;
+ GPIO_Init(SD_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure SD_SPI pins: MISO */
+ GPIO_InitStructure.GPIO_Pin = SD_SPI_MISO_PIN;
+ GPIO_Init(SD_SPI_MISO_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure SD_SPI_CS_PIN pin: SD Card CS pin */
+ GPIO_InitStructure.GPIO_Pin = SD_CS_PIN;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
+ GPIO_Init(SD_CS_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure SD_SPI_DETECT_PIN pin: SD Card detect pin */
+ GPIO_InitStructure.GPIO_Pin = SD_DETECT_PIN;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
+ GPIO_Init(SD_DETECT_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< SD_SPI Config */
+ SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
+ SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
+ SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
+ SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
+ SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
+ SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
+ SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2;
+ SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
+ SPI_InitStructure.SPI_CRCPolynomial = 7;
+ SPI_Init(SD_SPI, &SPI_InitStructure);
+
+ SPI_Cmd(SD_SPI, ENABLE); /*!< SD_SPI enable */
+}
+
+/**
+ * @brief DeInitializes peripherals used by the I2C EEPROM driver.
+ * @param None
+ * @retval None
+ */
+void sEE_LowLevel_DeInit(void)
+{
+ GPIO_InitTypeDef GPIO_InitStructure;
+ NVIC_InitTypeDef NVIC_InitStructure;
+
+ /* sEE_I2C Peripheral Disable */
+ I2C_Cmd(sEE_I2C, DISABLE);
+
+ /* sEE_I2C DeInit */
+ I2C_DeInit(sEE_I2C);
+
+ /*!< sEE_I2C Periph clock disable */
+ RCC_APB1PeriphClockCmd(sEE_I2C_CLK, DISABLE);
+
+ /*!< GPIO configuration */
+ /*!< Configure sEE_I2C pins: SCL */
+ GPIO_InitStructure.GPIO_Pin = sEE_I2C_SCL_PIN;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+ GPIO_Init(sEE_I2C_SCL_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure sEE_I2C pins: SDA */
+ GPIO_InitStructure.GPIO_Pin = sEE_I2C_SDA_PIN;
+ GPIO_Init(sEE_I2C_SDA_GPIO_PORT, &GPIO_InitStructure);
+
+ /* Configure and enable I2C DMA TX Channel interrupt */
+ NVIC_InitStructure.NVIC_IRQChannel = sEE_I2C_DMA_TX_IRQn;
+ NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = sEE_I2C_DMA_PREPRIO;
+ NVIC_InitStructure.NVIC_IRQChannelSubPriority = sEE_I2C_DMA_SUBPRIO;
+ NVIC_InitStructure.NVIC_IRQChannelCmd = DISABLE;
+ NVIC_Init(&NVIC_InitStructure);
+
+ /* Configure and enable I2C DMA RX Channel interrupt */
+ NVIC_InitStructure.NVIC_IRQChannel = sEE_I2C_DMA_RX_IRQn;
+ NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = sEE_I2C_DMA_PREPRIO;
+ NVIC_InitStructure.NVIC_IRQChannelSubPriority = sEE_I2C_DMA_SUBPRIO;
+ NVIC_Init(&NVIC_InitStructure);
+
+ /* Disable and Deinitialize the DMA channels */
+ DMA_Cmd(sEE_I2C_DMA_CHANNEL_TX, DISABLE);
+ DMA_Cmd(sEE_I2C_DMA_CHANNEL_RX, DISABLE);
+ DMA_DeInit(sEE_I2C_DMA_CHANNEL_TX);
+ DMA_DeInit(sEE_I2C_DMA_CHANNEL_RX);
+}
+
+/**
+ * @brief Initializes peripherals used by the I2C EEPROM driver.
+ * @param None
+ * @retval None
+ */
+void sEE_LowLevel_Init(void)
+{
+ GPIO_InitTypeDef GPIO_InitStructure;
+ NVIC_InitTypeDef NVIC_InitStructure;
+
+ /*!< sEE_I2C_SCL_GPIO_CLK and sEE_I2C_SDA_GPIO_CLK Periph clock enable */
+ RCC_APB2PeriphClockCmd(sEE_I2C_SCL_GPIO_CLK | sEE_I2C_SDA_GPIO_CLK, ENABLE);
+
+ /*!< sEE_I2C Periph clock enable */
+ RCC_APB1PeriphClockCmd(sEE_I2C_CLK, ENABLE);
+
+ /*!< GPIO configuration */
+ /*!< Configure sEE_I2C pins: SCL */
+ GPIO_InitStructure.GPIO_Pin = sEE_I2C_SCL_PIN;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_OD;
+ GPIO_Init(sEE_I2C_SCL_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure sEE_I2C pins: SDA */
+ GPIO_InitStructure.GPIO_Pin = sEE_I2C_SDA_PIN;
+ GPIO_Init(sEE_I2C_SDA_GPIO_PORT, &GPIO_InitStructure);
+
+ /* Configure and enable I2C DMA TX Channel interrupt */
+ NVIC_InitStructure.NVIC_IRQChannel = sEE_I2C_DMA_TX_IRQn;
+ NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = sEE_I2C_DMA_PREPRIO;
+ NVIC_InitStructure.NVIC_IRQChannelSubPriority = sEE_I2C_DMA_SUBPRIO;
+ NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+ NVIC_Init(&NVIC_InitStructure);
+
+ /* Configure and enable I2C DMA RX Channel interrupt */
+ NVIC_InitStructure.NVIC_IRQChannel = sEE_I2C_DMA_RX_IRQn;
+ NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = sEE_I2C_DMA_PREPRIO;
+ NVIC_InitStructure.NVIC_IRQChannelSubPriority = sEE_I2C_DMA_SUBPRIO;
+ NVIC_Init(&NVIC_InitStructure);
+
+ /*!< I2C DMA TX and RX channels configuration */
+ /* Enable the DMA clock */
+ RCC_AHBPeriphClockCmd(sEE_I2C_DMA_CLK, ENABLE);
+
+ /* I2C TX DMA Channel configuration */
+ DMA_DeInit(sEE_I2C_DMA_CHANNEL_TX);
+ sEEDMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)sEE_I2C_DR_Address;
+ sEEDMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)0; /* This parameter will be configured durig communication */
+ sEEDMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST; /* This parameter will be configured durig communication */
+ sEEDMA_InitStructure.DMA_BufferSize = 0xFFFF; /* This parameter will be configured durig communication */
+ sEEDMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
+ sEEDMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
+ sEEDMA_InitStructure.DMA_PeripheralDataSize = DMA_MemoryDataSize_Byte;
+ sEEDMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
+ sEEDMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
+ sEEDMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh;
+ sEEDMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
+ DMA_Init(sEE_I2C_DMA_CHANNEL_TX, &sEEDMA_InitStructure);
+
+ /* I2C RX DMA Channel configuration */
+ DMA_DeInit(sEE_I2C_DMA_CHANNEL_RX);
+ DMA_Init(sEE_I2C_DMA_CHANNEL_RX, &sEEDMA_InitStructure);
+
+ /* Enable the DMA Channels Interrupts */
+ DMA_ITConfig(sEE_I2C_DMA_CHANNEL_TX, DMA_IT_TC, ENABLE);
+ DMA_ITConfig(sEE_I2C_DMA_CHANNEL_RX, DMA_IT_TC, ENABLE);
+}
+
+/**
+ * @brief Initializes DMA channel used by the I2C EEPROM driver.
+ * @param None
+ * @retval None
+ */
+void sEE_LowLevel_DMAConfig(uint32_t pBuffer, uint32_t BufferSize, uint32_t Direction)
+{
+ /* Initialize the DMA with the new parameters */
+ if (Direction == sEE_DIRECTION_TX)
+ {
+ /* Configure the DMA Tx Channel with the buffer address and the buffer size */
+ sEEDMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)pBuffer;
+ sEEDMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
+ sEEDMA_InitStructure.DMA_BufferSize = (uint32_t)BufferSize;
+ DMA_Init(sEE_I2C_DMA_CHANNEL_TX, &sEEDMA_InitStructure);
+ }
+ else
+ {
+ /* Configure the DMA Rx Channel with the buffer address and the buffer size */
+ sEEDMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)pBuffer;
+ sEEDMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
+ sEEDMA_InitStructure.DMA_BufferSize = (uint32_t)BufferSize;
+ DMA_Init(sEE_I2C_DMA_CHANNEL_RX, &sEEDMA_InitStructure);
+ }
+}
+
+/**
+ * @brief DeInitializes the peripherals used by the SPI FLASH driver.
+ * @param None
+ * @retval None
+ */
+void sFLASH_LowLevel_DeInit(void)
+{
+ GPIO_InitTypeDef GPIO_InitStructure;
+
+ /*!< Disable the sFLASH_SPI */
+ SPI_Cmd(sFLASH_SPI, DISABLE);
+
+ /*!< DeInitializes the sFLASH_SPI */
+ SPI_I2S_DeInit(sFLASH_SPI);
+
+ /*!< sFLASH_SPI Periph clock disable */
+ RCC_APB2PeriphClockCmd(sFLASH_SPI_CLK, DISABLE);
+
+ /*!< Configure sFLASH_SPI pins: SCK */
+ GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_SCK_PIN;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+ GPIO_Init(sFLASH_SPI_SCK_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure sFLASH_SPI pins: MISO */
+ GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_MISO_PIN;
+ GPIO_Init(sFLASH_SPI_MISO_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure sFLASH_SPI pins: MOSI */
+ GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_MOSI_PIN;
+ GPIO_Init(sFLASH_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure sFLASH_CS_PIN pin: sFLASH Card CS pin */
+ GPIO_InitStructure.GPIO_Pin = sFLASH_CS_PIN;
+ GPIO_Init(sFLASH_CS_GPIO_PORT, &GPIO_InitStructure);
+}
+
+/**
+ * @brief Initializes the peripherals used by the SPI FLASH driver.
+ * @param None
+ * @retval None
+ */
+void sFLASH_LowLevel_Init(void)
+{
+ GPIO_InitTypeDef GPIO_InitStructure;
+
+ /*!< sFLASH_SPI_CS_GPIO, sFLASH_SPI_MOSI_GPIO, sFLASH_SPI_MISO_GPIO
+ and sFLASH_SPI_SCK_GPIO Periph clock enable */
+ RCC_APB2PeriphClockCmd(sFLASH_CS_GPIO_CLK | sFLASH_SPI_MOSI_GPIO_CLK | sFLASH_SPI_MISO_GPIO_CLK |
+ sFLASH_SPI_SCK_GPIO_CLK, ENABLE);
+
+ /*!< sFLASH_SPI Periph clock enable */
+ RCC_APB2PeriphClockCmd(sFLASH_SPI_CLK, ENABLE);
+
+ /*!< Configure sFLASH_SPI pins: SCK */
+ GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_SCK_PIN;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+ GPIO_Init(sFLASH_SPI_SCK_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure sFLASH_SPI pins: MOSI */
+ GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_MOSI_PIN;
+ GPIO_Init(sFLASH_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure sFLASH_SPI pins: MISO */
+ GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_MISO_PIN;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+ GPIO_Init(sFLASH_SPI_MISO_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure sFLASH_CS_PIN pin: sFLASH Card CS pin */
+ GPIO_InitStructure.GPIO_Pin = sFLASH_CS_PIN;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
+ GPIO_Init(sFLASH_CS_GPIO_PORT, &GPIO_InitStructure);
+}
+
+/**
+ * @brief DeInitializes the LM75_I2C.
+ * @param None
+ * @retval None
+ */
+void LM75_LowLevel_DeInit(void)
+{
+ GPIO_InitTypeDef GPIO_InitStructure;
+
+ /*!< Disable LM75_I2C */
+ I2C_Cmd(LM75_I2C, DISABLE);
+ /*!< DeInitializes the LM75_I2C */
+ I2C_DeInit(LM75_I2C);
+
+ /*!< LM75_I2C Periph clock disable */
+ RCC_APB1PeriphClockCmd(LM75_I2C_CLK, DISABLE);
+
+ /*!< Configure LM75_I2C pins: SCL */
+ GPIO_InitStructure.GPIO_Pin = LM75_I2C_SCL_PIN;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+ GPIO_Init(LM75_I2C_SCL_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure LM75_I2C pins: SDA */
+ GPIO_InitStructure.GPIO_Pin = LM75_I2C_SDA_PIN;
+ GPIO_Init(LM75_I2C_SDA_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure LM75_I2C pin: SMBUS ALERT */
+ GPIO_InitStructure.GPIO_Pin = LM75_I2C_SMBUSALERT_PIN;
+ GPIO_Init(LM75_I2C_SMBUSALERT_GPIO_PORT, &GPIO_InitStructure);
+}
+
+/**
+ * @brief Initializes the LM75_I2C..
+ * @param None
+ * @retval None
+ */
+void LM75_LowLevel_Init(void)
+{
+ GPIO_InitTypeDef GPIO_InitStructure;
+
+ /*!< LM75_I2C Periph clock enable */
+ RCC_APB1PeriphClockCmd(LM75_I2C_CLK, ENABLE);
+
+ /*!< LM75_I2C_SCL_GPIO_CLK, LM75_I2C_SDA_GPIO_CLK
+ and LM75_I2C_SMBUSALERT_GPIO_CLK Periph clock enable */
+ RCC_APB2PeriphClockCmd(LM75_I2C_SCL_GPIO_CLK | LM75_I2C_SDA_GPIO_CLK |
+ LM75_I2C_SMBUSALERT_GPIO_CLK, ENABLE);
+
+ /*!< Configure LM75_I2C pins: SCL */
+ GPIO_InitStructure.GPIO_Pin = LM75_I2C_SCL_PIN;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_OD;
+ GPIO_Init(LM75_I2C_SCL_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure LM75_I2C pins: SDA */
+ GPIO_InitStructure.GPIO_Pin = LM75_I2C_SDA_PIN;
+ GPIO_Init(LM75_I2C_SDA_GPIO_PORT, &GPIO_InitStructure);
+
+ /*!< Configure LM75_I2C pin: SMBUS ALERT */
+ GPIO_InitStructure.GPIO_Pin = LM75_I2C_SMBUSALERT_PIN;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
+ GPIO_Init(LM75_I2C_SMBUSALERT_GPIO_PORT, &GPIO_InitStructure);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/src/periph_conf.h b/china_devel_board/test001/src/periph_conf.h
new file mode 100644
index 0000000..356dadb
--- /dev/null
+++ b/china_devel_board/test001/src/periph_conf.h
@@ -0,0 +1,400 @@
+// modified by micha
+
+
+// what works?
+// LED functions!
+
+/**
+ ******************************************************************************
+ * @file stm32100e_eval.h
+ * @author MCD Application Team
+ * @version V4.5.0
+ * @date 07-March-2011
+ * @brief This file contains definitions for STM32100E_EVAL's Leds, push-buttons
+ * COM ports, sFLASH (on SPI) and Temperature Sensor LM75 (on I2C)
+ * hardware resources.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32100E_EVAL_H
+#define __STM32100E_EVAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_conf.h"
+#include "stm32_eval.h"
+
+/** @addtogroup Utilities
+ * @{
+ */
+
+/** @addtogroup STM32_EVAL
+ * @{
+ */
+
+/** @addtogroup STM32100E_EVAL
+ * @{
+ */
+
+/** @addtogroup STM32100E_EVAL_LOW_LEVEL
+ * @{
+ */
+
+/** @defgroup STM32100E_EVAL_LOW_LEVEL_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32100E_EVAL_LOW_LEVEL_Exported_Constants
+ * @{
+ */
+/** @addtogroup STM32100E_EVAL_LOW_LEVEL_LED
+ * @{
+ */
+#define LEDn 4
+
+#define LED1_PIN GPIO_Pin_6
+#define LED1_GPIO_PORT GPIOC
+#define LED1_GPIO_CLK RCC_APB2Periph_GPIOC
+
+#define LED2_PIN GPIO_Pin_7
+#define LED2_GPIO_PORT GPIOC
+#define LED2_GPIO_CLK RCC_APB2Periph_GPIOC
+
+#define LED3_PIN GPIO_Pin_13
+#define LED3_GPIO_PORT GPIOD
+#define LED3_GPIO_CLK RCC_APB2Periph_GPIOD
+
+#define LED4_PIN GPIO_Pin_6
+#define LED4_GPIO_PORT GPIOD
+#define LED4_GPIO_CLK RCC_APB2Periph_GPIOD
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32100E_EVAL_LOW_LEVEL_BUTTON
+ * @{
+ */
+#define BUTTONn 8
+
+/**
+ * @brief Wakeup push-button
+ */
+#define WAKEUP_BUTTON_PIN GPIO_Pin_0
+#define WAKEUP_BUTTON_GPIO_PORT GPIOA
+#define WAKEUP_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOA
+#define WAKEUP_BUTTON_EXTI_LINE EXTI_Line0
+#define WAKEUP_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOA
+#define WAKEUP_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource0
+#define WAKEUP_BUTTON_EXTI_IRQn EXTI0_IRQn
+/**
+ * @brief Tamper push-button
+ */
+#define TAMPER_BUTTON_PIN GPIO_Pin_13
+#define TAMPER_BUTTON_GPIO_PORT GPIOC
+#define TAMPER_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOC
+#define TAMPER_BUTTON_EXTI_LINE EXTI_Line13
+#define TAMPER_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOC
+#define TAMPER_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource13
+#define TAMPER_BUTTON_EXTI_IRQn EXTI15_10_IRQn
+/**
+ * @brief Key push-button
+ */
+#define KEY_BUTTON_PIN GPIO_Pin_8
+#define KEY_BUTTON_GPIO_PORT GPIOG
+#define KEY_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOG
+#define KEY_BUTTON_EXTI_LINE EXTI_Line8
+#define KEY_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOG
+#define KEY_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource8
+#define KEY_BUTTON_EXTI_IRQn EXTI9_5_IRQn
+/**
+ * @brief Joystick Right push-button
+ */
+#define RIGHT_BUTTON_PIN GPIO_Pin_13
+#define RIGHT_BUTTON_GPIO_PORT GPIOG
+#define RIGHT_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOG
+#define RIGHT_BUTTON_EXTI_LINE EXTI_Line13
+#define RIGHT_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOG
+#define RIGHT_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource13
+#define RIGHT_BUTTON_EXTI_IRQn EXTI15_10_IRQn
+/**
+ * @brief Joystick Left push-button
+ */
+#define LEFT_BUTTON_PIN GPIO_Pin_14
+#define LEFT_BUTTON_GPIO_PORT GPIOG
+#define LEFT_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOG
+#define LEFT_BUTTON_EXTI_LINE EXTI_Line14
+#define LEFT_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOG
+#define LEFT_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource14
+#define LEFT_BUTTON_EXTI_IRQn EXTI15_10_IRQn
+/**
+ * @brief Joystick Up push-button
+ */
+#define UP_BUTTON_PIN GPIO_Pin_15
+#define UP_BUTTON_GPIO_PORT GPIOG
+#define UP_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOG
+#define UP_BUTTON_EXTI_LINE EXTI_Line15
+#define UP_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOG
+#define UP_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource15
+#define UP_BUTTON_EXTI_IRQn EXTI15_10_IRQn
+/**
+ * @brief Joystick Down push-button
+ */
+#define DOWN_BUTTON_PIN GPIO_Pin_11
+#define DOWN_BUTTON_GPIO_PORT GPIOG
+#define DOWN_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOG
+#define DOWN_BUTTON_EXTI_LINE EXTI_Line11
+#define DOWN_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOG
+#define DOWN_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource11
+#define DOWN_BUTTON_EXTI_IRQn EXTI15_10_IRQn
+/**
+ * @brief Joystick Sel push-button
+ */
+#define SEL_BUTTON_PIN GPIO_Pin_7
+#define SEL_BUTTON_GPIO_PORT GPIOG
+#define SEL_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOG
+#define SEL_BUTTON_EXTI_LINE EXTI_Line7
+#define SEL_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOG
+#define SEL_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource7
+#define SEL_BUTTON_EXTI_IRQn EXTI9_5_IRQn
+/**
+ * @}
+ */
+
+/** @addtogroup STM32100E_EVAL_LOW_LEVEL_COM
+ * @{
+ */
+#define COMn 2
+
+/**
+ * @brief Definition for COM port1, connected to USART1
+ */
+#define EVAL_COM1 USART1
+#define EVAL_COM1_CLK RCC_APB2Periph_USART1
+#define EVAL_COM1_TX_PIN GPIO_Pin_9
+#define EVAL_COM1_TX_GPIO_PORT GPIOA
+#define EVAL_COM1_TX_GPIO_CLK RCC_APB2Periph_GPIOA
+#define EVAL_COM1_RX_PIN GPIO_Pin_10
+#define EVAL_COM1_RX_GPIO_PORT GPIOA
+#define EVAL_COM1_RX_GPIO_CLK RCC_APB2Periph_GPIOA
+#define EVAL_COM1_IRQn USART1_IRQn
+
+/**
+ * @brief Definition for COM port2, connected to USART2
+ */
+#define EVAL_COM2 USART2
+#define EVAL_COM2_CLK RCC_APB1Periph_USART2
+#define EVAL_COM2_TX_PIN GPIO_Pin_2
+#define EVAL_COM2_TX_GPIO_PORT GPIOA
+#define EVAL_COM2_TX_GPIO_CLK RCC_APB2Periph_GPIOA
+#define EVAL_COM2_RX_PIN GPIO_Pin_3
+#define EVAL_COM2_RX_GPIO_PORT GPIOA
+#define EVAL_COM2_RX_GPIO_CLK RCC_APB2Periph_GPIOA
+#define EVAL_COM2_IRQn USART2_IRQn
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32100E_EVAL_LOW_LEVEL_SD_FLASH
+ * @{
+ */
+/**
+ * @brief SD SPI Interface pins
+ */
+#define SD_SPI SPI2
+#define SD_SPI_CLK RCC_APB1Periph_SPI2
+#define SD_SPI_SCK_PIN GPIO_Pin_13 /* PC.13 */
+#define SD_SPI_SCK_GPIO_PORT GPIOB /* GPIOB */
+#define SD_SPI_SCK_GPIO_CLK RCC_APB2Periph_GPIOB
+#define SD_SPI_MISO_PIN GPIO_Pin_14 /* PC.14 */
+#define SD_SPI_MISO_GPIO_PORT GPIOB /* GPIOB */
+#define SD_SPI_MISO_GPIO_CLK RCC_APB2Periph_GPIOB
+#define SD_SPI_MOSI_PIN GPIO_Pin_15 /* PB.15 */
+#define SD_SPI_MOSI_GPIO_PORT GPIOB /* GPIOB */
+#define SD_SPI_MOSI_GPIO_CLK RCC_APB2Periph_GPIOB
+#define SD_CS_PIN GPIO_Pin_6 /* PG.06 */
+#define SD_CS_GPIO_PORT GPIOG /* GPIOG */
+#define SD_CS_GPIO_CLK RCC_APB2Periph_GPIOG
+#define SD_DETECT_PIN GPIO_Pin_11 /* PF.11 */
+#define SD_DETECT_GPIO_PORT GPIOF /* GPIOF */
+#define SD_DETECT_GPIO_CLK RCC_APB2Periph_GPIOF
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM3210C_EVAL_LOW_LEVEL_I2C_EE
+ * @{
+ */
+/**
+ * @brief I2C EEPROM Interface pins
+ */
+#define sEE_I2C I2C2
+#define sEE_I2C_CLK RCC_APB1Periph_I2C2
+#define sEE_I2C_SCL_PIN GPIO_Pin_10 /* PB.10 */
+#define sEE_I2C_SCL_GPIO_PORT GPIOB /* GPIOB */
+#define sEE_I2C_SCL_GPIO_CLK RCC_APB2Periph_GPIOB
+#define sEE_I2C_SDA_PIN GPIO_Pin_11 /* PB.11 */
+#define sEE_I2C_SDA_GPIO_PORT GPIOB /* GPIOB */
+#define sEE_I2C_SDA_GPIO_CLK RCC_APB2Periph_GPIOB
+#define sEE_M24C64_32
+
+#define sEE_I2C_DMA DMA1
+#define sEE_I2C_DMA_CHANNEL_TX DMA1_Channel4
+#define sEE_I2C_DMA_CHANNEL_RX DMA1_Channel5
+#define sEE_I2C_DMA_FLAG_TX_TC DMA1_IT_TC4
+#define sEE_I2C_DMA_FLAG_TX_GL DMA1_IT_GL4
+#define sEE_I2C_DMA_FLAG_RX_TC DMA1_IT_TC5
+#define sEE_I2C_DMA_FLAG_RX_GL DMA1_IT_GL5
+#define sEE_I2C_DMA_CLK RCC_AHBPeriph_DMA1
+#define sEE_I2C_DR_Address ((uint32_t)0x40005810)
+#define sEE_USE_DMA
+
+#define sEE_I2C_DMA_TX_IRQn DMA1_Channel4_IRQn
+#define sEE_I2C_DMA_RX_IRQn DMA1_Channel5_IRQn
+#define sEE_I2C_DMA_TX_IRQHandler DMA1_Channel4_IRQHandler
+#define sEE_I2C_DMA_RX_IRQHandler DMA1_Channel5_IRQHandler
+#define sEE_I2C_DMA_PREPRIO 0
+#define sEE_I2C_DMA_SUBPRIO 0
+
+#define sEE_DIRECTION_TX 0
+#define sEE_DIRECTION_RX 1
+
+/* Time constant for the delay caclulation allowing to have a millisecond
+ incrementing counter. This value should be equal to (System Clock / 1000).
+ ie. if system clock = 24MHz then sEE_TIME_CONST should be 24. */
+#define sEE_TIME_CONST 24
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32100E_EVAL_LOW_LEVEL_M25P_FLASH_SPI
+ * @{
+ */
+/**
+ * @brief M25P FLASH SPI Interface pins
+ */
+#define sFLASH_SPI SPI1
+#define sFLASH_SPI_CLK RCC_APB2Periph_SPI1
+#define sFLASH_SPI_SCK_PIN GPIO_Pin_5 /* PA.05 */
+#define sFLASH_SPI_SCK_GPIO_PORT GPIOA /* GPIOA */
+#define sFLASH_SPI_SCK_GPIO_CLK RCC_APB2Periph_GPIOA
+#define sFLASH_SPI_MISO_PIN GPIO_Pin_6 /* PA.06 */
+#define sFLASH_SPI_MISO_GPIO_PORT GPIOA /* GPIOA */
+#define sFLASH_SPI_MISO_GPIO_CLK RCC_APB2Periph_GPIOA
+#define sFLASH_SPI_MOSI_PIN GPIO_Pin_7 /* PA.07 */
+#define sFLASH_SPI_MOSI_GPIO_PORT GPIOA /* GPIOA */
+#define sFLASH_SPI_MOSI_GPIO_CLK RCC_APB2Periph_GPIOA
+#define sFLASH_CS_PIN GPIO_Pin_6 /* PE.06 */
+#define sFLASH_CS_GPIO_PORT GPIOE /* GPIOE */
+#define sFLASH_CS_GPIO_CLK RCC_APB2Periph_GPIOE
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32100E_EVAL_LOW_LEVEL_TSENSOR_I2C
+ * @{
+ */
+/**
+ * @brief LM75 Temperature Sensor I2C Interface pins
+ */
+#define LM75_I2C I2C2
+#define LM75_I2C_CLK RCC_APB1Periph_I2C2
+#define LM75_I2C_SCL_PIN GPIO_Pin_10 /* PB.10 */
+#define LM75_I2C_SCL_GPIO_PORT GPIOB /* GPIOB */
+#define LM75_I2C_SCL_GPIO_CLK RCC_APB2Periph_GPIOB
+#define LM75_I2C_SDA_PIN GPIO_Pin_11 /* PB.11 */
+#define LM75_I2C_SDA_GPIO_PORT GPIOB /* GPIOB */
+#define LM75_I2C_SDA_GPIO_CLK RCC_APB2Periph_GPIOB
+#define LM75_I2C_SMBUSALERT_PIN GPIO_Pin_12 /* PB.12 */
+#define LM75_I2C_SMBUSALERT_GPIO_PORT GPIOB /* GPIOB */
+#define LM75_I2C_SMBUSALERT_GPIO_CLK RCC_APB2Periph_GPIOB
+#define LM75_I2C_DR ((uint32_t)0x40005810)
+
+#define LM75_DMA_CLK RCC_AHBPeriph_DMA1
+#define LM75_DMA_TX_CHANNEL DMA1_Channel4
+#define LM75_DMA_RX_CHANNEL DMA1_Channel5
+#define LM75_DMA_TX_TCFLAG DMA1_FLAG_TC4
+#define LM75_DMA_RX_TCFLAG DMA1_FLAG_TC5
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32100E_EVAL_LOW_LEVEL_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32100E_EVAL_LOW_LEVEL_Exported_Functions
+ * @{
+ */
+void STM_EVAL_LEDInit(Led_TypeDef Led);
+void STM_EVAL_LEDOn(Led_TypeDef Led);
+void STM_EVAL_LEDOff(Led_TypeDef Led);
+void STM_EVAL_LEDToggle(Led_TypeDef Led);
+void STM_EVAL_PBInit(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode);
+uint32_t STM_EVAL_PBGetState(Button_TypeDef Button);
+void STM_EVAL_COMInit(COM_TypeDef COM, USART_InitTypeDef* USART_InitStruct);
+void SD_LowLevel_DeInit(void);
+void SD_LowLevel_Init(void);
+void sEE_LowLevel_DeInit(void);
+void sEE_LowLevel_Init(void);
+void sEE_LowLevel_DMAConfig(uint32_t pBuffer, uint32_t BufferSize, uint32_t Direction);
+void sFLASH_LowLevel_DeInit(void);
+void sFLASH_LowLevel_Init(void);
+void LM75_LowLevel_DeInit(void);
+void LM75_LowLevel_Init(void);
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32100E_EVAL_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/src/platform_config.h b/china_devel_board/test001/src/platform_config.h
new file mode 100644
index 0000000..82f22c5
--- /dev/null
+++ b/china_devel_board/test001/src/platform_config.h
@@ -0,0 +1,82 @@
+/**
+ ******************************************************************************
+ * @file SPI/FullDuplex_SoftNSS/platform_config.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 08-April-2011
+ * @brief Evaluation board specific configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __PLATFORM_CONFIG_H
+#define __PLATFORM_CONFIG_H
+
+/* Includes ------------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line corresponding to the STMicroelectronics evaluation board
+ used to run the example */
+#if !defined (USE_STM32100B_EVAL) && !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL) && !defined (USE_STM3210C_EVAL) && !defined (USE_STM32100E_EVAL)
+ //#define USE_STM32100B_EVAL
+ //#define USE_STM3210B_EVAL
+ //#define USE_STM3210E_EVAL
+ //#define USE_STM32100E_EVAL
+ #define USE_STM3210C_EVAL
+#endif
+
+/* Define the STM32F10x hardware depending on the used evaluation board */
+#if defined (USE_STM3210B_EVAL) || defined (USE_STM3210E_EVAL) || defined(USE_STM32100B_EVAL) || defined (USE_STM32100E_EVAL)
+ #define SPIy SPI1
+ #define SPIy_CLK RCC_APB2Periph_SPI1
+ #define SPIy_GPIO GPIOA
+ #define SPIy_GPIO_CLK RCC_APB2Periph_GPIOA
+ #define SPIy_PIN_SCK GPIO_Pin_5
+ #define SPIy_PIN_MISO GPIO_Pin_6
+ #define SPIy_PIN_MOSI GPIO_Pin_7
+
+ #define SPIz SPI2
+ #define SPIz_CLK RCC_APB1Periph_SPI2
+ #define SPIz_GPIO GPIOB
+ #define SPIz_GPIO_CLK RCC_APB2Periph_GPIOB
+ #define SPIz_PIN_SCK GPIO_Pin_13
+ #define SPIz_PIN_MISO GPIO_Pin_14
+ #define SPIz_PIN_MOSI GPIO_Pin_15
+
+#elif defined (USE_STM3210C_EVAL)
+ #define SPIy SPI3 /* SPI pins are remapped by software */
+ #define SPIy_CLK RCC_APB1Periph_SPI3
+ #define SPIy_GPIO GPIOC
+ #define SPIy_GPIO_CLK RCC_APB2Periph_GPIOC
+ #define SPIy_PIN_SCK GPIO_Pin_10
+ #define SPIy_PIN_MISO GPIO_Pin_11
+ #define SPIy_PIN_MOSI GPIO_Pin_12
+
+ #define SPIz SPI2
+ #define SPIz_CLK RCC_APB1Periph_SPI2
+ #define SPIz_GPIO GPIOB
+ #define SPIz_GPIO_CLK RCC_APB2Periph_GPIOB
+ #define SPIz_PIN_SCK GPIO_Pin_13
+ #define SPIz_PIN_MISO GPIO_Pin_14
+ #define SPIz_PIN_MOSI GPIO_Pin_15
+
+#endif
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+#endif /* __PLATFORM_CONFIG_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/src/serial.c b/china_devel_board/test001/src/serial.c
new file mode 100644
index 0000000..a4294c9
--- /dev/null
+++ b/china_devel_board/test001/src/serial.c
@@ -0,0 +1,71 @@
+#include "stm32f10x.h"
+#include "stm32f10x_gpio.h"
+#include "stm32f10x_rcc.h"
+#include "stm32f10x_usart.h"
+#include "serial.h"
+
+
+
+
+
+
+
+
+void comm_put(char d) {
+ while (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET) {
+ ;
+ }
+ USART_SendData(USART1, (uint16_t) d);
+}
+
+
+void comm_puts(const char* s) {
+ char c;
+ while ((c = *s++) != '\0') {
+ comm_put(c);
+ }
+}
+
+void uinit(u32 rate){
+
+ GPIO_InitTypeDef GPIO_InitStructure;
+ USART_InitTypeDef USART_InitStructure;
+// USART_ClockInitTypeDef USART_ClockInitStructure;
+
+ //enable bus clocks
+ RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_AFIO, ENABLE);
+
+ RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);
+
+ //Configure USART1 Tx (PA.02) as alternate function push-pull
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+ GPIO_Init(GPIOA, &GPIO_InitStructure);
+ //Configure USART1 Rx (PA.03) as input floating
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+ GPIO_Init(GPIOA, &GPIO_InitStructure);
+
+ /* USART1 and USART2 configuration ------------------------------------------------------*/
+ /* USART and USART2 configured as follow:
+ - BaudRate = 115200 baud
+ - Word Length = 8 Bits
+ - One Stop Bit
+ - No parity
+ - Hardware flow control disabled (RTS and CTS signals)
+ - Receive and transmit enabled
+ */
+ USART_InitStructure.USART_BaudRate = rate;
+ USART_InitStructure.USART_WordLength = USART_WordLength_8b;
+ USART_InitStructure.USART_StopBits = USART_StopBits_1;
+ USART_InitStructure.USART_Parity = USART_Parity_No;
+ USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+ USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
+
+ /* Configure USART1 */
+ USART_Init(USART1, &USART_InitStructure);
+
+ /* Enable the USART1 */
+ USART_Cmd(USART1, ENABLE);
+}
diff --git a/china_devel_board/test001/src/serial.h b/china_devel_board/test001/src/serial.h
new file mode 100644
index 0000000..59b838c
--- /dev/null
+++ b/china_devel_board/test001/src/serial.h
@@ -0,0 +1,5 @@
+void comm_put(char d);
+
+void comm_puts(const char* s);
+
+void uinit(u32 rate);
diff --git a/china_devel_board/test001/src/spi.c b/china_devel_board/test001/src/spi.c
new file mode 100644
index 0000000..805b1c4
--- /dev/null
+++ b/china_devel_board/test001/src/spi.c
@@ -0,0 +1,67 @@
+#include "spi.h"
+
+#define BUFFER_SIZE 2
+
+SPI_TypeDef * SPI_Module;
+GPIO_TypeDef * CS_GPIO;
+uint16_t CS_GPIO_Pin;
+
+uint8_t spiRxCounter;
+uint8_t spiTxCounter;
+uint8_t spiBusyFlag;
+uint8_t spiDataBuffer[BUFFER_SIZE];
+
+void spi_create(SPI_TypeDef * SPIx, GPIO_TypeDef * CS_GPIOx, uint16_t CS_GPIO_Pin_x){
+ SPI_Module = SPIx;
+ CS_GPIO = CS_GPIOx;
+ CS_GPIO_Pin = CS_GPIO_Pin_x;
+ spiBusyFlag = 0;
+}
+
+void spi_enableTxInterrupt(void){
+ SPI_I2S_ITConfig(SPI1, SPI_I2S_IT_TXE, ENABLE);
+}
+
+void spi_disableTxInterrupt(void){
+ SPI_I2S_ITConfig(SPI1, SPI_I2S_IT_TXE, DISABLE);
+}
+
+void spi_chipSelect(void){
+ GPIO_WriteBit(CS_GPIO, CS_GPIO_Pin, RESET);
+}
+
+void spi_chipDeselect(void){
+ GPIO_WriteBit(CS_GPIO, CS_GPIO_Pin, SET);
+}
+
+void spi_writeTwoBytes(uint8_t byte1, uint8_t byte0){
+ while(spiBusyFlag){}
+ spiTxCounter = 2;
+ spiRxCounter = 2;
+ spiBusyFlag = 1;
+ spiDataBuffer[0] = byte0;
+ spiDataBuffer[1] = byte1;
+ spi_chipSelect();
+ spi_enableTxInterrupt();
+}
+
+void spi_handleSPI1Interrupt(void){
+ if(SPI_I2S_GetFlagStatus(SPI_Module, SPI_I2S_FLAG_RXNE) == SET){
+ // Receive Buffer Not Empty
+ spiRxCounter--;
+ spiDataBuffer[spiRxCounter] = SPI_I2S_ReceiveData(SPI_Module);
+
+ if(spiRxCounter == 0){
+ spi_chipDeselect();
+ spiBusyFlag = 0;
+ }
+ }else if(SPI_I2S_GetFlagStatus(SPI_Module, SPI_I2S_FLAG_TXE) == SET){
+ // Transmit Buffer Empty
+ if(spiTxCounter != 0){
+ SPI_I2S_SendData(SPI_Module, spiDataBuffer[spiTxCounter - 1]);
+ spiTxCounter--;
+ }else{
+ spi_disableTxInterrupt();
+ }
+ }
+}
\ No newline at end of file
diff --git a/china_devel_board/test001/src/spi.h b/china_devel_board/test001/src/spi.h
new file mode 100644
index 0000000..24394b3
--- /dev/null
+++ b/china_devel_board/test001/src/spi.h
@@ -0,0 +1,5 @@
+#include "stm32f10x_conf.h"
+
+void spi_create(SPI_TypeDef * SPIx, GPIO_TypeDef * CS_GPIOx, uint16_t CS_GPIO_Pin);
+void spi_handleSPI1Interrupt(void);
+void spi_writeTwoBytes(uint8_t byte1, uint8_t byte0);
\ No newline at end of file
diff --git a/china_devel_board/test001/src/spi_conf.h b/china_devel_board/test001/src/spi_conf.h
new file mode 100644
index 0000000..3d62c7f
--- /dev/null
+++ b/china_devel_board/test001/src/spi_conf.h
@@ -0,0 +1,92 @@
+/**
+ ******************************************************************************
+ * @file SPI/FullDuplex_SoftNSS/platform_config.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 08-April-2011
+ * @brief Evaluation board specific configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __PLATFORM_CONFIG_H
+#define __PLATFORM_CONFIG_H
+
+/* Includes ------------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line corresponding to the STMicroelectronics evaluation board
+ used to run the example */
+// #if !defined (USE_STM32100B_EVAL) && !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL) && !defined (USE_STM3210C_EVAL) && !defined (USE_STM32100E_EVAL)
+// //#define USE_STM32100B_EVAL
+// //#define USE_STM3210B_EVAL
+// //#define USE_STM3210E_EVAL
+// //#define USE_STM32100E_EVAL
+// #define USE_STM3210C_EVAL
+// #endif
+
+/* Define the STM32F10x hardware depending on the used evaluation board */
+// #if defined (USE_STM3210B_EVAL) || defined (USE_STM3210E_EVAL) || defined(USE_STM32100B_EVAL) || defined (USE_STM32100E_EVAL)
+ #define SPIy SPI1
+ #define SPIy_CLK RCC_APB2Periph_SPI1
+ #define SPIy_GPIO GPIOA
+ #define SPIy_GPIO_CLK RCC_APB2Periph_GPIOA
+ #define SPIy_PIN_SCK GPIO_Pin_5
+ #define SPIy_PIN_MISO GPIO_Pin_6
+ #define SPIy_PIN_MOSI GPIO_Pin_7
+
+// remapped
+// #define SPIy SPI1
+// #define SPIy_CLK RCC_APB2Periph_SPI1
+// #define SPIy_GPIO GPIOB
+// #define SPIy_GPIO_CLK RCC_APB2Periph_GPIOB
+// #define SPIy_PIN_SCK GPIO_Pin_3
+// #define SPIy_PIN_MISO GPIO_Pin_4
+// #define SPIy_PIN_MOSI GPIO_Pin_5
+
+
+ #define SPIz SPI2
+ #define SPIz_CLK RCC_APB1Periph_SPI2
+ #define SPIz_GPIO GPIOB
+ #define SPIz_GPIO_CLK RCC_APB2Periph_GPIOB
+ #define SPIz_PIN_SCK GPIO_Pin_13
+ #define SPIz_PIN_MISO GPIO_Pin_14
+ #define SPIz_PIN_MOSI GPIO_Pin_15
+
+// #elif defined (USE_STM3210C_EVAL)
+// #define SPIy SPI3 /* SPI pins are remapped by software */
+// #define SPIy_CLK RCC_APB1Periph_SPI3
+// #define SPIy_GPIO GPIOC
+// #define SPIy_GPIO_CLK RCC_APB2Periph_GPIOC
+// #define SPIy_PIN_SCK GPIO_Pin_10
+// #define SPIy_PIN_MISO GPIO_Pin_11
+// #define SPIy_PIN_MOSI GPIO_Pin_12
+//
+// #define SPIz SPI2
+// #define SPIz_CLK RCC_APB1Periph_SPI2
+// #define SPIz_GPIO GPIOB
+// #define SPIz_GPIO_CLK RCC_APB2Periph_GPIOB
+// #define SPIz_PIN_SCK GPIO_Pin_13
+// #define SPIz_PIN_MISO GPIO_Pin_14
+// #define SPIz_PIN_MOSI GPIO_Pin_15
+//
+// #endif
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+#endif /* __PLATFORM_CONFIG_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/src/startup.c b/china_devel_board/test001/src/startup.c
new file mode 100644
index 0000000..85f328e
--- /dev/null
+++ b/china_devel_board/test001/src/startup.c
@@ -0,0 +1,281 @@
+#include "stm32f10x.h"
+
+typedef void( *const intfunc )( void );
+
+#define WEAK __attribute__ ((weak))
+
+/* provided by the linker script */
+//extern unsigned long _etext; /* start address of the static initialization data */
+extern unsigned long _sidata; /* start address of the static initialization data */
+extern unsigned long _sdata; /* start address of the data section */
+extern unsigned long _edata; /* end address of the data section */
+extern unsigned long _sbss; /* start address of the bss section */
+extern unsigned long _ebss; /* end address of the bss section */
+extern unsigned long _estack;
+
+void Reset_Handler(void) __attribute__((__interrupt__));
+void __Init_Data(void);
+void Default_Handler(void);
+
+extern int main(void);
+
+void WEAK NMI_Handler(void);
+void WEAK HardFault_Handler(void);
+void WEAK MemManage_Handler(void);
+void WEAK BusFault_Handler(void);
+void WEAK UsageFault_Handler(void);
+void WEAK MemManage_Handler(void);
+void WEAK SVC_Handler(void);
+void WEAK DebugMon_Handler(void);
+void WEAK PendSV_Handler(void);
+void WEAK SysTick_Handler(void);
+
+void WEAK WWDG_IRQHandler(void);
+void WEAK PVD_IRQHandler(void);
+void WEAK TAMPER_IRQHandler(void);
+void WEAK RTC_IRQHandler(void);
+void WEAK FLASH_IRQHandler(void);
+void WEAK RCC_IRQHandler(void);
+void WEAK EXTI0_IRQHandler(void);
+void WEAK EXTI1_IRQHandler(void);
+void WEAK EXTI2_IRQHandler(void);
+void WEAK EXTI3_IRQHandler(void);
+void WEAK EXTI4_IRQHandler(void);
+void WEAK DMA1_Channel1_IRQHandler(void);
+void WEAK DMA1_Channel2_IRQHandler(void);
+void WEAK DMA1_Channel3_IRQHandler(void);
+void WEAK DMA1_Channel4_IRQHandler(void);
+void WEAK DMA1_Channel5_IRQHandler(void);
+void WEAK DMA1_Channel6_IRQHandler(void);
+void WEAK DMA1_Channel7_IRQHandler(void);
+void WEAK ADC1_2_IRQHandler(void);
+void WEAK USB_HP_CAN1_TX_IRQHandler(void);
+void WEAK USB_LP_CAN1_RX0_IRQHandler(void);
+void WEAK CAN1_RX1_IRQHandler(void);
+void WEAK CAN1_SCE_IRQHandler(void);
+void WEAK EXTI9_5_IRQHandler(void);
+void WEAK TIM1_BRK_IRQHandler(void);
+void WEAK TIM1_UP_IRQHandler(void);
+void WEAK TIM1_TRG_COM_IRQHandler(void);
+void WEAK TIM1_CC_IRQHandler(void);
+void WEAK TIM2_IRQHandler(void);
+void WEAK TIM3_IRQHandler(void);
+void WEAK TIM4_IRQHandler(void);
+void WEAK I2C1_EV_IRQHandler(void);
+void WEAK I2C1_ER_IRQHandler(void);
+void WEAK I2C2_EV_IRQHandler(void);
+void WEAK I2C2_ER_IRQHandler(void);
+void WEAK SPI1_IRQHandler(void);
+void WEAK SPI2_IRQHandler(void);
+void WEAK USART1_IRQHandler(void);
+void WEAK USART2_IRQHandler(void);
+void WEAK USART3_IRQHandler(void);
+void WEAK EXTI15_10_IRQHandler(void);
+void WEAK RTCAlarm_IRQHandler(void);
+void WEAK USBWakeUp_IRQHandler(void);
+void WEAK TIM8_BRK_IRQHandler(void);
+void WEAK TIM8_UP_IRQHandler(void);
+void WEAK TIM8_TRG_COM_IRQHandler(void);
+void WEAK TIM8_CC_IRQHandler(void);
+void WEAK ADC3_IRQHandler(void);
+void WEAK FSMC_IRQHandler(void);
+void WEAK SDIO_IRQHandler(void);
+void WEAK TIM5_IRQHandler(void);
+void WEAK SPI3_IRQHandler(void);
+void WEAK UART4_IRQHandler(void);
+void WEAK UART5_IRQHandler(void);
+void WEAK TIM6_IRQHandler(void);
+void WEAK TIM7_IRQHandler(void);
+void WEAK DMA2_Channel1_IRQHandler(void);
+void WEAK DMA2_Channel2_IRQHandler(void);
+void WEAK DMA2_Channel3_IRQHandler(void);
+void WEAK DMA2_Channel4_5_IRQHandler(void);
+
+__attribute__ ((section(".isr_vectors")))
+void (* const g_pfnVectors[])(void) = {
+ (intfunc)((unsigned long)&_estack), /* The stack pointer after relocation */
+ Reset_Handler, /* Reset Handler */
+ NMI_Handler, /* NMI Handler */
+ HardFault_Handler, /* Hard Fault Handler */
+ MemManage_Handler, /* MPU Fault Handler */
+ BusFault_Handler, /* Bus Fault Handler */
+ UsageFault_Handler, /* Usage Fault Handler */
+ 0, /* Reserved */
+ 0, /* Reserved */
+ 0, /* Reserved */
+ 0, /* Reserved */
+ SVC_Handler, /* SVCall Handler */
+ DebugMon_Handler, /* Debug Monitor Handler */
+ 0, /* Reserved */
+ PendSV_Handler, /* PendSV Handler */
+ SysTick_Handler, /* SysTick Handler */
+
+ /* External Interrupts */
+ WWDG_IRQHandler, /* Window Watchdog */
+ PVD_IRQHandler, /* PVD through EXTI Line detect */
+ TAMPER_IRQHandler, /* Tamper */
+ RTC_IRQHandler, /* RTC */
+ FLASH_IRQHandler, /* Flash */
+ RCC_IRQHandler, /* RCC */
+ EXTI0_IRQHandler, /* EXTI Line 0 */
+ EXTI1_IRQHandler, /* EXTI Line 1 */
+ EXTI2_IRQHandler, /* EXTI Line 2 */
+ EXTI3_IRQHandler, /* EXTI Line 3 */
+ EXTI4_IRQHandler, /* EXTI Line 4 */
+ DMA1_Channel1_IRQHandler, /* DMA1 Channel 1 */
+ DMA1_Channel2_IRQHandler, /* DMA1 Channel 2 */
+ DMA1_Channel3_IRQHandler, /* DMA1 Channel 3 */
+ DMA1_Channel4_IRQHandler, /* DMA1 Channel 4 */
+ DMA1_Channel5_IRQHandler, /* DMA1 Channel 5 */
+ DMA1_Channel6_IRQHandler, /* DMA1 Channel 6 */
+ DMA1_Channel7_IRQHandler, /* DMA1 Channel 7 */
+ ADC1_2_IRQHandler, /* ADC1 & ADC2 */
+ USB_HP_CAN1_TX_IRQHandler, /* USB High Priority or CAN1 TX */
+ USB_LP_CAN1_RX0_IRQHandler, /* USB Low Priority or CAN1 RX0 */
+ CAN1_RX1_IRQHandler, /* CAN1 RX1 */
+ CAN1_SCE_IRQHandler, /* CAN1 SCE */
+ EXTI9_5_IRQHandler, /* EXTI Line 9..5 */
+ TIM1_BRK_IRQHandler, /* TIM1 Break */
+ TIM1_UP_IRQHandler, /* TIM1 Update */
+ TIM1_TRG_COM_IRQHandler, /* TIM1 Trigger and Commutation */
+ TIM1_CC_IRQHandler, /* TIM1 Capture Compare */
+ TIM2_IRQHandler, /* TIM2 */
+ TIM3_IRQHandler, /* TIM3 */
+ TIM4_IRQHandler, /* TIM4 */
+ I2C1_EV_IRQHandler, /* I2C1 Event */
+ I2C1_ER_IRQHandler, /* I2C1 Error */
+ I2C2_EV_IRQHandler, /* I2C2 Event */
+ I2C2_ER_IRQHandler, /* I2C2 Error */
+ SPI1_IRQHandler, /* SPI1 */
+ SPI2_IRQHandler, /* SPI2 */
+ USART1_IRQHandler, /* USART1 */
+ USART2_IRQHandler, /* USART2 */
+ USART3_IRQHandler, /* USART3 */
+ EXTI15_10_IRQHandler, /* EXTI Line 15..10 */
+ RTCAlarm_IRQHandler, /* RTC Alarm through EXTI Line */
+ USBWakeUp_IRQHandler, /* USB Wakeup from suspend */
+ TIM8_BRK_IRQHandler,
+ TIM8_UP_IRQHandler,
+ TIM8_TRG_COM_IRQHandler,
+ TIM8_CC_IRQHandler,
+ ADC3_IRQHandler,
+ FSMC_IRQHandler,
+ SDIO_IRQHandler,
+ TIM5_IRQHandler,
+ SPI3_IRQHandler,
+ UART4_IRQHandler,
+ UART5_IRQHandler,
+ TIM6_IRQHandler,
+ TIM7_IRQHandler,
+ DMA2_Channel1_IRQHandler,
+ DMA2_Channel2_IRQHandler,
+ DMA2_Channel3_IRQHandler,
+ DMA2_Channel4_5_IRQHandler,
+ 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0,
+ 0, 0, 0,
+ (intfunc)0xF1E0F85F /* @0x1E0. This is for boot in RAM mode for STM32F10x High Density devices. */
+};
+
+void __Init_Data(void) {
+ unsigned long *src, *dst;
+ /* copy the data segment into ram */
+ src = &_sidata;
+ dst = &_sdata;
+ if (src != dst)
+ while(dst < &_edata)
+ *(dst++) = *(src++);
+
+ /* zero the bss segment */
+ dst = &_sbss;
+ while(dst < &_ebss)
+ *(dst++) = 0;
+}
+
+void Reset_Handler(void) {
+ __Init_Data(); /* Initialize memory, data and bss */
+ extern u32 _isr_vectors_offs; /* the offset to the vector table in ram */
+ SCB->VTOR = 0x08000000 | ((u32)&_isr_vectors_offs & (u32)0x1FFFFF80); /* set interrupt vector table address */
+ SystemInit(); /* configure the clock */
+ main(); /* start execution of the program */
+ while(1) {}
+}
+
+#pragma weak MMI_Handler = Default_Handler
+#pragma weak MemManage_Handler = Default_Handler
+#pragma weak BusFault_Handler = Default_Handler
+#pragma weak UsageFault_Handler = Default_Handler
+#pragma weak SVC_Handler = Default_Handler
+#pragma weak DebugMon_Handler = Default_Handler
+#pragma weak PendSV_Handler = Default_Handler
+#pragma weak SysTick_Handler = Default_Handler
+#pragma weak WWDG_IRQHandler = Default_Handler
+#pragma weak PVD_IRQHandler = Default_Handler
+#pragma weak TAMPER_IRQHandler = Default_Handler
+#pragma weak RTC_IRQHandler = Default_Handler
+#pragma weak FLASH_IRQHandler = Default_Handler
+#pragma weak RCC_IRQHandler = Default_Handler
+#pragma weak EXTI0_IRQHandler = Default_Handler
+#pragma weak EXTI1_IRQHandler = Default_Handler
+#pragma weak EXTI2_IRQHandler = Default_Handler
+#pragma weak EXTI3_IRQHandler = Default_Handler
+#pragma weak EXTI4_IRQHandler = Default_Handler
+#pragma weak DMA1_Channel1_IRQHandler = Default_Handler
+#pragma weak DMA1_Channel2_IRQHandler = Default_Handler
+#pragma weak DMA1_Channel3_IRQHandler = Default_Handler
+#pragma weak DMA1_Channel4_IRQHandler = Default_Handler
+#pragma weak DMA1_Channel5_IRQHandler = Default_Handler
+#pragma weak DMA1_Channel6_IRQHandler = Default_Handler
+#pragma weak DMA1_Channel7_IRQHandler = Default_Handler
+#pragma weak ADC1_2_IRQHandler = Default_Handler
+#pragma weak USB_HP_CAN1_TX_IRQHandler = Default_Handler
+#pragma weak USB_LP_CAN1_RX0_IRQHandler = Default_Handler
+#pragma weak CAN1_RX1_IRQHandler = Default_Handler
+#pragma weak CAN1_SCE_IRQHandler = Default_Handler
+#pragma weak EXTI9_5_IRQHandler = Default_Handler
+#pragma weak TIM1_BRK_IRQHandler = Default_Handler
+#pragma weak TIM1_UP_IRQHandler = Default_Handler
+#pragma weak TIM1_TRG_COM_IRQHandler = Default_Handler
+#pragma weak TIM1_CC_IRQHandler = Default_Handler
+#pragma weak TIM2_IRQHandler = Default_Handler
+#pragma weak TIM3_IRQHandler = Default_Handler
+#pragma weak TIM4_IRQHandler = Default_Handler
+#pragma weak I2C1_EV_IRQHandler = Default_Handler
+#pragma weak I2C1_ER_IRQHandler = Default_Handler
+#pragma weak I2C2_EV_IRQHandler = Default_Handler
+#pragma weak I2C2_ER_IRQHandler = Default_Handler
+#pragma weak SPI1_IRQHandler = Default_Handler
+#pragma weak SPI2_IRQHandler = Default_Handler
+#pragma weak USART1_IRQHandler = Default_Handler
+#pragma weak USART2_IRQHandler = Default_Handler
+#pragma weak USART3_IRQHandler = Default_Handler
+#pragma weak EXTI15_10_IRQHandler = Default_Handler
+#pragma weak RTCAlarm_IRQHandler = Default_Handler
+#pragma weak USBWakeUp_IRQHandler = Default_Handler
+#pragma weak TIM8_BRK_IRQHandler = Default_Handler
+#pragma weak TIM8_UP_IRQHandler = Default_Handler
+#pragma weak TIM8_TRG_COM_IRQHandler = Default_Handler
+#pragma weak TIM8_CC_IRQHandler = Default_Handler
+#pragma weak ADC3_IRQHandler = Default_Handler
+#pragma weak FSMC_IRQHandler = Default_Handler
+#pragma weak SDIO_IRQHandler = Default_Handler
+#pragma weak TIM5_IRQHandler = Default_Handler
+#pragma weak SPI3_IRQHandler = Default_Handler
+#pragma weak UART4_IRQHandler = Default_Handler
+#pragma weak UART5_IRQHandler = Default_Handler
+#pragma weak TIM6_IRQHandler = Default_Handler
+#pragma weak TIM7_IRQHandler = Default_Handler
+#pragma weak DMA2_Channel1_IRQHandler = Default_Handler
+#pragma weak DMA2_Channel2_IRQHandler = Default_Handler
+#pragma weak DMA2_Channel3_IRQHandler = Default_Handler
+#pragma weak DMA2_Channel4_5_IRQHandler = Default_Handler
+
+void Default_Handler(void) {
+ while (1) {}
+}
diff --git a/china_devel_board/test001/src/stm32_eval.h b/china_devel_board/test001/src/stm32_eval.h
new file mode 100644
index 0000000..e00f025
--- /dev/null
+++ b/china_devel_board/test001/src/stm32_eval.h
@@ -0,0 +1,374 @@
+/**
+ ******************************************************************************
+ * @file stm32_eval.h
+ * @author MCD Application Team
+ * @version V4.5.0
+ * @date 07-March-2011
+ * @brief Header file for stm32_eval.c module.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_EVAL_H
+#define __STM32_EVAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+
+/** @addtogroup Utilities
+ * @{
+ */
+
+/** @addtogroup STM32_EVAL
+ * @{
+ */
+
+/** @defgroup STM32_EVAL_Abstraction_Layer
+ * @{
+ */
+
+/** @defgroup STM32_EVAL_HARDWARE_RESOURCES
+ * @{
+ */
+
+/**
+@code
+ The table below gives an overview of the hardware resources supported by each
+ STM32 EVAL board.
+ - LCD: TFT Color LCD (Parallel (FSMC) and Serial (SPI))
+ - IOE: IO Expander on I2C
+ - sFLASH: serial SPI FLASH (M25Pxxx)
+ - sEE: serial I2C EEPROM (M24C08, M24C32, M24C64)
+ - TSENSOR: Temperature Sensor (LM75)
+ - SD: SD Card memory (SPI and SDIO (SD Card MODE))
+ =================================================================================================================+
+ STM32 EVAL | LED | Buttons | Com Ports | LCD | IOE | sFLASH | sEE | TSENSOR | SD (SPI) | SD(SDIO) |
+ =================================================================================================================+
+ STM3210B-EVAL | 4 | 8 | 2 | YES (SPI) | NO | YES | NO | YES | YES | NO |
+ -----------------------------------------------------------------------------------------------------------------+
+ STM3210E-EVAL | 4 | 8 | 2 | YES (FSMC)| NO | YES | NO | YES | NO | YES |
+ -----------------------------------------------------------------------------------------------------------------+
+ STM3210C-EVAL | 4 | 3 | 1 | YES (SPI) | YES | NO | YES | NO | YES | NO |
+ -----------------------------------------------------------------------------------------------------------------+
+ STM32100B-EVAL | 4 | 8 | 2 | YES (SPI) | NO | YES | NO | YES | YES | NO |
+ -----------------------------------------------------------------------------------------------------------------+
+ STM32L152-EVAL | 4 | 8 | 2 | YES (SPI) | NO | NO | NO | YES | YES | NO |
+ -----------------------------------------------------------------------------------------------------------------+
+ STM32100E-EVAL | 4 | 8 | 2 | YES (FSMC)| YES | YES | YES | YES | YES | NO |
+ =================================================================================================================+
+@endcode
+*/
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32_EVAL_Exported_Types
+ * @{
+ */
+typedef enum
+{
+ LED1 = 0,
+ LED2 = 1,
+ LED3 = 2,
+ LED4 = 3
+} Led_TypeDef;
+
+typedef enum
+{
+ BUTTON_WAKEUP = 0,
+ BUTTON_TAMPER = 1,
+ BUTTON_KEY = 2,
+ BUTTON_RIGHT = 3,
+ BUTTON_LEFT = 4,
+ BUTTON_UP = 5,
+ BUTTON_DOWN = 6,
+ BUTTON_SEL = 7
+} Button_TypeDef;
+
+typedef enum
+{
+ BUTTON_MODE_GPIO = 0,
+ BUTTON_MODE_EXTI = 1
+} ButtonMode_TypeDef;
+
+typedef enum
+{
+ JOY_NONE = 0,
+ JOY_SEL = 1,
+ JOY_DOWN = 2,
+ JOY_LEFT = 3,
+ JOY_RIGHT = 4,
+ JOY_UP = 5
+} JOYState_TypeDef
+;
+
+typedef enum
+{
+ COM1 = 0,
+ COM2 = 1
+} COM_TypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup STM32_EVAL_Exported_Constants
+ * @{
+ */
+
+/**
+ * @brief Uncomment the line corresponding to the STMicroelectronics evaluation
+ * board used in your application.
+ *
+ * Tip: To avoid modifying this file each time you need to switch between these
+ * boards, you can define the board in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_STM32100B_EVAL) && !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL)\
+ && !defined (USE_STM3210C_EVAL) && !defined (USE_STM32L152_EVAL) && !defined (USE_STM32100E_EVAL)
+ //#define USE_STM32100B_EVAL
+ //#define USE_STM3210B_EVAL
+ //#define USE_STM3210E_EVAL
+ //#define USE_STM3210C_EVAL
+ //#define USE_STM32L152_EVAL
+ //#define USE_STM32100E_EVAL
+#endif
+
+
+/*
+#ifdef USE_STM32100B_EVAL
+ #include "stm32f10x.h"
+ #include "stm32100b_eval/stm32100b_eval.h"
+#elif defined USE_STM3210B_EVAL
+ #include "stm32f10x.h"
+ #include "stm3210b_eval/stm3210b_eval.h"
+#elif defined USE_STM3210E_EVAL
+ #include "stm32f10x.h"
+ #include "stm3210e_eval/stm3210e_eval.h"
+#elif defined USE_STM3210C_EVAL
+ #include "stm32f10x.h"
+ #include "stm3210c_eval/stm3210c_eval.h"
+#elif defined USE_STM32L152_EVAL
+ #include "stm32l1xx.h"
+ #include "stm32l152_eval/stm32l152_eval.h"
+#elif defined USE_STM32100E_EVAL
+ #include "stm32f10x.h"
+ #include "stm32100e_eval/stm32100e_eval.h"
+#else
+ #error "Please select first the STM32 EVAL board to be used (in stm32_eval.h)"
+#endif
+
+*/
+// nimm gefälligst meine hardware-konfiguration
+#include "periph_conf.h"
+
+
+/**
+ * @brief STM32 Button Defines Legacy
+ */
+#define Button_WAKEUP BUTTON_WAKEUP
+#define Button_TAMPER BUTTON_TAMPER
+#define Button_KEY BUTTON_KEY
+#define Button_RIGHT BUTTON_RIGHT
+#define Button_LEFT BUTTON_LEFT
+#define Button_UP BUTTON_UP
+#define Button_DOWN BUTTON_DOWN
+#define Button_SEL BUTTON_SEL
+#define Mode_GPIO BUTTON_MODE_GPIO
+#define Mode_EXTI BUTTON_MODE_EXTI
+#define Button_Mode_TypeDef ButtonMode_TypeDef
+#define JOY_CENTER JOY_SEL
+#define JOY_State_TypeDef JOYState_TypeDef
+
+/**
+ * @brief LCD Defines Legacy
+ */
+#define LCD_RSNWR_GPIO_CLK LCD_NWR_GPIO_CLK
+#define LCD_SPI_GPIO_PORT LCD_SPI_SCK_GPIO_PORT
+#define LCD_SPI_GPIO_CLK LCD_SPI_SCK_GPIO_CLK
+#define R0 LCD_REG_0
+#define R1 LCD_REG_1
+#define R2 LCD_REG_2
+#define R3 LCD_REG_3
+#define R4 LCD_REG_4
+#define R5 LCD_REG_5
+#define R6 LCD_REG_6
+#define R7 LCD_REG_7
+#define R8 LCD_REG_8
+#define R9 LCD_REG_9
+#define R10 LCD_REG_10
+#define R12 LCD_REG_12
+#define R13 LCD_REG_13
+#define R14 LCD_REG_14
+#define R15 LCD_REG_15
+#define R16 LCD_REG_16
+#define R17 LCD_REG_17
+#define R18 LCD_REG_18
+#define R19 LCD_REG_19
+#define R20 LCD_REG_20
+#define R21 LCD_REG_21
+#define R22 LCD_REG_22
+#define R23 LCD_REG_23
+#define R24 LCD_REG_24
+#define R25 LCD_REG_25
+#define R26 LCD_REG_26
+#define R27 LCD_REG_27
+#define R28 LCD_REG_28
+#define R29 LCD_REG_29
+#define R30 LCD_REG_30
+#define R31 LCD_REG_31
+#define R32 LCD_REG_32
+#define R33 LCD_REG_33
+#define R34 LCD_REG_34
+#define R36 LCD_REG_36
+#define R37 LCD_REG_37
+#define R40 LCD_REG_40
+#define R41 LCD_REG_41
+#define R43 LCD_REG_43
+#define R45 LCD_REG_45
+#define R48 LCD_REG_48
+#define R49 LCD_REG_49
+#define R50 LCD_REG_50
+#define R51 LCD_REG_51
+#define R52 LCD_REG_52
+#define R53 LCD_REG_53
+#define R54 LCD_REG_54
+#define R55 LCD_REG_55
+#define R56 LCD_REG_56
+#define R57 LCD_REG_57
+#define R59 LCD_REG_59
+#define R60 LCD_REG_60
+#define R61 LCD_REG_61
+#define R62 LCD_REG_62
+#define R63 LCD_REG_63
+#define R64 LCD_REG_64
+#define R65 LCD_REG_65
+#define R66 LCD_REG_66
+#define R67 LCD_REG_67
+#define R68 LCD_REG_68
+#define R69 LCD_REG_69
+#define R70 LCD_REG_70
+#define R71 LCD_REG_71
+#define R72 LCD_REG_72
+#define R73 LCD_REG_73
+#define R74 LCD_REG_74
+#define R75 LCD_REG_75
+#define R76 LCD_REG_76
+#define R77 LCD_REG_77
+#define R78 LCD_REG_78
+#define R79 LCD_REG_79
+#define R80 LCD_REG_80
+#define R81 LCD_REG_81
+#define R82 LCD_REG_82
+#define R83 LCD_REG_83
+#define R96 LCD_REG_96
+#define R97 LCD_REG_97
+#define R106 LCD_REG_106
+#define R118 LCD_REG_118
+#define R128 LCD_REG_128
+#define R129 LCD_REG_129
+#define R130 LCD_REG_130
+#define R131 LCD_REG_131
+#define R132 LCD_REG_132
+#define R133 LCD_REG_133
+#define R134 LCD_REG_134
+#define R135 LCD_REG_135
+#define R136 LCD_REG_136
+#define R137 LCD_REG_137
+#define R139 LCD_REG_139
+#define R140 LCD_REG_140
+#define R141 LCD_REG_141
+#define R143 LCD_REG_143
+#define R144 LCD_REG_144
+#define R145 LCD_REG_145
+#define R146 LCD_REG_146
+#define R147 LCD_REG_147
+#define R148 LCD_REG_148
+#define R149 LCD_REG_149
+#define R150 LCD_REG_150
+#define R151 LCD_REG_151
+#define R152 LCD_REG_152
+#define R153 LCD_REG_153
+#define R154 LCD_REG_154
+#define R157 LCD_REG_157
+#define R192 LCD_REG_192
+#define R193 LCD_REG_193
+#define R227 LCD_REG_227
+#define R229 LCD_REG_229
+#define R231 LCD_REG_231
+#define R239 LCD_REG_239
+#define White LCD_COLOR_WHITE
+#define Black LCD_COLOR_BLACK
+#define Grey LCD_COLOR_GREY
+#define Blue LCD_COLOR_BLUE
+#define Blue2 LCD_COLOR_BLUE2
+#define Red LCD_COLOR_RED
+#define Magenta LCD_COLOR_MAGENTA
+#define Green LCD_COLOR_GREEN
+#define Cyan LCD_COLOR_CYAN
+#define Yellow LCD_COLOR_YELLOW
+#define Line0 LCD_LINE_0
+#define Line1 LCD_LINE_1
+#define Line2 LCD_LINE_2
+#define Line3 LCD_LINE_3
+#define Line4 LCD_LINE_4
+#define Line5 LCD_LINE_5
+#define Line6 LCD_LINE_6
+#define Line7 LCD_LINE_7
+#define Line8 LCD_LINE_8
+#define Line9 LCD_LINE_9
+#define Horizontal LCD_DIR_HORIZONTAL
+#define Vertical LCD_DIR_VERTICAL
+
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32_EVAL_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32_EVAL_Exported_Functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32_EVAL_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/src/stm32f10x_conf.h b/china_devel_board/test001/src/stm32f10x_conf.h
new file mode 100644
index 0000000..49ccdb2
--- /dev/null
+++ b/china_devel_board/test001/src/stm32f10x_conf.h
@@ -0,0 +1,25 @@
+/* Includes -----------------------------------------------------------*/
+/* Uncomment the line below to enable peripheral header file inclusion */
+/* #include "stm32f10x_adc.h" */
+/* #include "stm32f10x_bkp.h" */
+// #include "stm32f10x_can.h"
+/* #include "stm32f10x_cec.h" */
+/* #include "stm32f10x_crc.h" */
+/* #include "stm32f10x_dac.h" */
+/* #include "stm32f10x_dbgmcu.h" */
+ #include "stm32f10x_dma.h"
+ #include "stm32f10x_exti.h"
+ #include "stm32f10x_flash.h"
+/* #include "stm32f10x_fsmc.h" */
+ #include "stm32f10x_gpio.h"
+ #include "stm32f10x_i2c.h"
+/* #include "stm32f10x_iwdg.h" */
+/* #include "stm32f10x_pwr.h" */
+ #include "stm32f10x_rcc.h"
+/* #include "stm32f10x_rtc.h" */
+/* #include "stm32f10x_sdio.h" */
+ #include "stm32f10x_spi.h"
+#include "stm32f10x_tim.h"
+ #include "stm32f10x_usart.h"
+/* #include "stm32f10x_wwdg.h" */
+#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
\ No newline at end of file
diff --git a/china_devel_board/test001/src/stm32f10x_it.c b/china_devel_board/test001/src/stm32f10x_it.c
new file mode 100644
index 0000000..86927a9
--- /dev/null
+++ b/china_devel_board/test001/src/stm32f10x_it.c
@@ -0,0 +1,185 @@
+/**
+ ******************************************************************************
+ * @file Project/STM32F10x_StdPeriph_Template/stm32f10x_it.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 08-April-2011
+ * @brief Main Interrupt Service Routines.
+ * This file provides template for all exceptions handler and
+ * peripherals interrupt service routine.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_it.h"
+#include "stm32f10x_conf.h" /*include directives for StdPeriphLib */
+
+/* custom includes for this project */
+// #include "serial.h"
+#include "spi.h"
+
+
+/** @addtogroup STM32F10x_StdPeriph_Template
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/******************************************************************************/
+/* Cortex-M3 Processor Exceptions Handlers */
+/******************************************************************************/
+
+
+/* from diller-tech */
+
+
+void SPI1_IRQHandler(void){
+ spi_handleSPI1Interrupt();
+}
+
+
+
+
+
+
+
+
+
+
+/**
+ * @brief This function handles NMI exception.
+ * @param None
+ * @retval None
+ */
+void NMI_Handler(void)
+{
+}
+
+/**
+ * @brief This function handles Hard Fault exception.
+ * @param None
+ * @retval None
+ */
+void HardFault_Handler(void)
+{
+ /* Go to infinite loop when Hard Fault exception occurs */
+ while (1)
+ {
+ }
+}
+
+/**
+ * @brief This function handles Memory Manage exception.
+ * @param None
+ * @retval None
+ */
+void MemManage_Handler(void)
+{
+ /* Go to infinite loop when Memory Manage exception occurs */
+ while (1)
+ {
+ }
+}
+
+/**
+ * @brief This function handles Bus Fault exception.
+ * @param None
+ * @retval None
+ */
+void BusFault_Handler(void)
+{
+ /* Go to infinite loop when Bus Fault exception occurs */
+ while (1)
+ {
+ }
+}
+
+/**
+ * @brief This function handles Usage Fault exception.
+ * @param None
+ * @retval None
+ */
+void UsageFault_Handler(void)
+{
+ /* Go to infinite loop when Usage Fault exception occurs */
+ while (1)
+ {
+ }
+}
+
+/**
+ * @brief This function handles SVCall exception.
+ * @param None
+ * @retval None
+ */
+void SVC_Handler(void)
+{
+}
+
+/**
+ * @brief This function handles Debug Monitor exception.
+ * @param None
+ * @retval None
+ */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+ * @brief This function handles PendSVC exception.
+ * @param None
+ * @retval None
+ */
+void PendSV_Handler(void)
+{
+}
+
+/**
+ * @brief This function handles SysTick Handler.
+ * @param None
+ * @retval None
+ */
+/* moved to main.c */
+// void SysTick_Handler(void)
+// {
+//
+// }
+
+/******************************************************************************/
+/* STM32F10x Peripherals Interrupt Handlers */
+/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */
+/* available peripheral interrupt handler's name please refer to the startup */
+/* file (startup_stm32f10x_xx.s). */
+/******************************************************************************/
+
+/**
+ * @brief This function handles PPP interrupt request.
+ * @param None
+ * @retval None
+ */
+/*void PPP_IRQHandler(void)
+{
+}*/
+
+/**
+ * @}
+ */
+
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/src/stm32f10x_it.h b/china_devel_board/test001/src/stm32f10x_it.h
new file mode 100644
index 0000000..9935cf2
--- /dev/null
+++ b/china_devel_board/test001/src/stm32f10x_it.h
@@ -0,0 +1,54 @@
+/**
+ ******************************************************************************
+ * @file Project/STM32F10x_StdPeriph_Template/stm32f10x_it.h
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 08-April-2011
+ * @brief This file contains the headers of the interrupt handlers.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_IT_H
+#define __STM32F10x_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_IT_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/china_devel_board/test001/stm32loader.py b/china_devel_board/test001/stm32loader.py
new file mode 100755
index 0000000..2347ccf
--- /dev/null
+++ b/china_devel_board/test001/stm32loader.py
@@ -0,0 +1,436 @@
+#!/usr/bin/env python
+
+# -*- coding: utf-8 -*-
+# vim: sw=4:ts=4:si:et:enc=utf-8
+
+# Author: Ivan A-R <ivan@tuxotronic.org>
+# Project page: http://tuxotronic.org/wiki/projects/stm32loader
+#
+# This file is part of stm32loader.
+#
+# stm32loader is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 3, or (at your option) any later
+# version.
+#
+# stm32loader is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with stm32loader; see the file COPYING3. If not see
+# <http://www.gnu.org/licenses/>.
+
+import sys, getopt
+import serial
+import time
+
+try:
+ from progressbar import *
+ usepbar = 1
+except:
+ usepbar = 0
+
+# Verbose level
+QUIET = 20
+
+def mdebug(level, message):
+ if(QUIET >= level):
+ print >> sys.stderr , message
+
+
+class CmdException(Exception):
+ pass
+
+class CommandInterface:
+ def open(self, aport='/dev/tty.usbserial-FTD3TMCH', abaudrate=115200) :
+ self.sp = serial.Serial(
+ port=aport,
+ baudrate=abaudrate, # baudrate
+ bytesize=8, # number of databits
+ parity=serial.PARITY_EVEN,
+ stopbits=1,
+ xonxoff=0, # enable software flow control
+ rtscts=0, # disable RTS/CTS flow control
+ timeout=5 # set a timeout value, None for waiting forever
+ )
+
+
+ def _wait_for_ask(self, info = ""):
+ # wait for ask
+ try:
+ ask = ord(self.sp.read())
+ except:
+ raise CmdException("Can't read port or timeout")
+ else:
+ if ask == 0x79:
+ # ACK
+ return 1
+ else:
+ if ask == 0x1F:
+ # NACK
+ raise CmdException("NACK "+info)
+ else:
+ # Unknow responce
+ raise CmdException("Unknow response. "+info+": "+hex(ask))
+
+
+ def reset(self):
+ self.sp.setDTR(0)
+ time.sleep(0.1)
+ self.sp.setDTR(1)
+ time.sleep(0.5)
+
+ def initChip(self):
+ # Set boot
+ self.sp.setRTS(0)
+ self.reset()
+
+ self.sp.write("\x7F") # Syncro
+ return self._wait_for_ask("Syncro")
+
+ def releaseChip(self):
+ self.sp.setRTS(1)
+ self.reset()
+
+ def cmdGeneric(self, cmd):
+ self.sp.write(chr(cmd))
+ self.sp.write(chr(cmd ^ 0xFF)) # Control byte
+ return self._wait_for_ask(hex(cmd))
+
+ def cmdGet(self):
+ if self.cmdGeneric(0x00):
+ mdebug(10, "*** Get command");
+ len = ord(self.sp.read())
+ version = ord(self.sp.read())
+ mdebug(10, " Bootloader version: "+hex(version))
+ dat = map(lambda c: hex(ord(c)), self.sp.read(len))
+ mdebug(10, " Available commands: "+str(dat))
+ self._wait_for_ask("0x00 end")
+ return version
+ else:
+ raise CmdException("Get (0x00) failed")
+
+ def cmdGetVersion(self):
+ if self.cmdGeneric(0x01):
+ mdebug(10, "*** GetVersion command")
+ version = ord(self.sp.read())
+ self.sp.read(2)
+ self._wait_for_ask("0x01 end")
+ mdebug(10, " Bootloader version: "+hex(version))
+ return version
+ else:
+ raise CmdException("GetVersion (0x01) failed")
+
+ def cmdGetID(self):
+ if self.cmdGeneric(0x02):
+ mdebug(10, "*** GetID command")
+ len = ord(self.sp.read())
+ id = self.sp.read(len+1)
+ self._wait_for_ask("0x02 end")
+ return id
+ else:
+ raise CmdException("GetID (0x02) failed")
+
+
+ def _encode_addr(self, addr):
+ byte3 = (addr >> 0) & 0xFF
+ byte2 = (addr >> 8) & 0xFF
+ byte1 = (addr >> 16) & 0xFF
+ byte0 = (addr >> 24) & 0xFF
+ crc = byte0 ^ byte1 ^ byte2 ^ byte3
+ return (chr(byte0) + chr(byte1) + chr(byte2) + chr(byte3) + chr(crc))
+
+
+ def cmdReadMemory(self, addr, lng):
+ assert(lng <= 256)
+ if self.cmdGeneric(0x11):
+ mdebug(10, "*** ReadMemory command")
+ self.sp.write(self._encode_addr(addr))
+ self._wait_for_ask("0x11 address failed")
+ N = (lng - 1) & 0xFF
+ crc = N ^ 0xFF
+ self.sp.write(chr(N) + chr(crc))
+ self._wait_for_ask("0x11 length failed")
+ return map(lambda c: ord(c), self.sp.read(lng))
+ else:
+ raise CmdException("ReadMemory (0x11) failed")
+
+
+ def cmdGo(self, addr):
+ if self.cmdGeneric(0x21):
+ mdebug(10, "*** Go command")
+ self.sp.write(self._encode_addr(addr))
+ self._wait_for_ask("0x21 go failed")
+ else:
+ raise CmdException("Go (0x21) failed")
+
+
+ def cmdWriteMemory(self, addr, data):
+ assert(len(data) <= 256)
+ if self.cmdGeneric(0x31):
+ mdebug(10, "*** Write memory command")
+ self.sp.write(self._encode_addr(addr))
+ self._wait_for_ask("0x31 address failed")
+ #map(lambda c: hex(ord(c)), data)
+ lng = (len(data)-1) & 0xFF
+ mdebug(10, " %s bytes to write" % [lng+1]);
+ self.sp.write(chr(lng)) # len really
+ crc = 0xFF
+ for c in data:
+ crc = crc ^ c
+ self.sp.write(chr(c))
+ self.sp.write(chr(crc))
+ self._wait_for_ask("0x31 programming failed")
+ mdebug(10, " Write memory done")
+ else:
+ raise CmdException("Write memory (0x31) failed")
+
+
+ def cmdEraseMemory(self, sectors = None):
+ if self.cmdGeneric(0x43):
+ mdebug(10, "*** Erase memory command")
+ if sectors is None:
+ # Global erase
+ self.sp.write(chr(0xFF))
+ self.sp.write(chr(0x00))
+ else:
+ # Sectors erase
+ self.sp.write(chr((len(sectors)-1) & 0xFF))
+ crc = 0xFF
+ for c in sectors:
+ crc = crc ^ c
+ self.sp.write(chr(c))
+ self.sp.write(chr(crc))
+ self._wait_for_ask("0x43 erasing failed")
+ mdebug(10, " Erase memory done")
+ else:
+ raise CmdException("Erase memory (0x43) failed")
+
+ def cmdWriteProtect(self, sectors):
+ if self.cmdGeneric(0x63):
+ mdebug(10, "*** Write protect command")
+ self.sp.write(chr((len(sectors)-1) & 0xFF))
+ crc = 0xFF
+ for c in sectors:
+ crc = crc ^ c
+ self.sp.write(chr(c))
+ self.sp.write(chr(crc))
+ self._wait_for_ask("0x63 write protect failed")
+ mdebug(10, " Write protect done")
+ else:
+ raise CmdException("Write Protect memory (0x63) failed")
+
+ def cmdWriteUnprotect(self):
+ if self.cmdGeneric(0x73):
+ mdebug(10, "*** Write Unprotect command")
+ self._wait_for_ask("0x73 write unprotect failed")
+ self._wait_for_ask("0x73 write unprotect 2 failed")
+ mdebug(10, " Write Unprotect done")
+ else:
+ raise CmdException("Write Unprotect (0x73) failed")
+
+ def cmdReadoutProtect(self):
+ if self.cmdGeneric(0x82):
+ mdebug(10, "*** Readout protect command")
+ self._wait_for_ask("0x82 readout protect failed")
+ self._wait_for_ask("0x82 readout protect 2 failed")
+ mdebug(10, " Read protect done")
+ else:
+ raise CmdException("Readout protect (0x82) failed")
+
+ def cmdReadoutUnprotect(self):
+ if self.cmdGeneric(0x92):
+ mdebug(10, "*** Readout Unprotect command")
+ self._wait_for_ask("0x92 readout unprotect failed")
+ self._wait_for_ask("0x92 readout unprotect 2 failed")
+ mdebug(10, " Read Unprotect done")
+ else:
+ raise CmdException("Readout unprotect (0x92) failed")
+
+
+# Complex commands section
+
+ def readMemory(self, addr, lng):
+ data = []
+ if usepbar:
+ widgets = ['Reading: ', Percentage(),', ', ETA(), ' ', Bar()]
+ pbar = ProgressBar(widgets=widgets,maxval=lng, term_width=79).start()
+
+ while lng > 256:
+ if usepbar:
+ pbar.update(pbar.maxval-lng)
+ else:
+ mdebug(5, "Read %(len)d bytes at 0x%(addr)X" % {'addr': addr, 'len': 256})
+ data = data + self.cmdReadMemory(addr, 256)
+ addr = addr + 256
+ lng = lng - 256
+ if usepbar:
+ pbar.update(pbar.maxval-lng)
+ pbar.finish()
+ else:
+ mdebug(5, "Read %(len)d bytes at 0x%(addr)X" % {'addr': addr, 'len': 256})
+ data = data + self.cmdReadMemory(addr, lng)
+ return data
+
+ def writeMemory(self, addr, data):
+ lng = len(data)
+ if usepbar:
+ widgets = ['Writing: ', Percentage(),' ', ETA(), ' ', Bar()]
+ pbar = ProgressBar(widgets=widgets, maxval=lng, term_width=79).start()
+
+ offs = 0
+ while lng > 256:
+ if usepbar:
+ pbar.update(pbar.maxval-lng)
+ else:
+ mdebug(5, "Write %(len)d bytes at 0x%(addr)X" % {'addr': addr, 'len': 256})
+ self.cmdWriteMemory(addr, data[offs:offs+256])
+ offs = offs + 256
+ addr = addr + 256
+ lng = lng - 256
+ if usepbar:
+ pbar.update(pbar.maxval-lng)
+ pbar.finish()
+ else:
+ mdebug(5, "Write %(len)d bytes at 0x%(addr)X" % {'addr': addr, 'len': 256})
+ self.cmdWriteMemory(addr, data[offs:offs+lng] + ([0xFF] * (256-lng)) )
+
+
+
+
+ def __init__(self) :
+ pass
+
+
+def usage():
+ print """Usage: %s [-hqVewvr] [-l length] [-p port] [-b baud] [-a addr] [file.bin]
+ -h This help
+ -q Quiet
+ -V Verbose
+ -e Erase
+ -w Write
+ -v Verify
+ -r Read
+ -l length Length of read
+ -p port Serial port (default: /dev/tty.usbserial-ftCYPMYJ)
+ -b baud Baud speed (default: 115200)
+ -a addr Target address
+
+ ./stm32loader.py -e -w -v example/main.bin
+
+ """ % sys.argv[0]
+
+
+if __name__ == "__main__":
+
+ # Import Psyco if available
+ try:
+ import psyco
+ psyco.full()
+ print "Using Psyco..."
+ except ImportError:
+ pass
+
+ conf = {
+ 'port': '/dev/tty.usbserial-FTD3TMCH',
+ 'baud': 115200,
+ 'address': 0x08000000,
+ 'erase': 0,
+ 'write': 0,
+ 'verify': 0,
+ 'read': 0,
+ 'len': 1000,
+ 'fname':'',
+ }
+
+# http://www.python.org/doc/2.5.2/lib/module-getopt.html
+
+ try:
+ opts, args = getopt.getopt(sys.argv[1:], "hqVewvrp:b:a:l:")
+ except getopt.GetoptError, err:
+ # print help information and exit:
+ print str(err) # will print something like "option -a not recognized"
+ usage()
+ sys.exit(2)
+
+ QUIET = 5
+
+ for o, a in opts:
+ if o == '-V':
+ QUIET = 10
+ elif o == '-q':
+ QUIET = 0
+ elif o == '-h':
+ usage()
+ sys.exit(0)
+ elif o == '-e':
+ conf['erase'] = 1
+ elif o == '-w':
+ conf['write'] = 1
+ elif o == '-v':
+ conf['verify'] = 1
+ elif o == '-r':
+ conf['read'] = 1
+ elif o == '-p':
+ conf['port'] = a
+ elif o == '-b':
+ conf['baud'] = eval(a)
+ elif o == '-a':
+ conf['address'] = eval(a)
+ elif o == '-l':
+ conf['len'] = eval(a)
+# elif o == '-f':
+# conf['fname'] = a
+ else:
+ assert False, "unhandled option"
+
+ cmd = CommandInterface()
+ cmd.open(conf['port'], conf['baud'])
+ mdebug(10, "Open port %(port)s, baud %(baud)d" % {'port':conf['port'], 'baud':conf['baud']})
+ try:
+ try:
+ cmd.initChip()
+ except:
+ print "Can't init. Ensure that BOOT0 is enabled and reset device"
+
+ bootversion = cmd.cmdGet()
+ mdebug(0, "Bootloader version %X" % bootversion)
+ mdebug(0, "Chip id `%s'" % str(map(lambda c: hex(ord(c)), cmd.cmdGetID())))
+# cmd.cmdGetVersion()
+# cmd.cmdGetID()
+# cmd.cmdReadoutUnprotect()
+# cmd.cmdWriteUnprotect()
+# cmd.cmdWriteProtect([0, 1])
+
+ if (conf['write'] or conf['verify']):
+ #data = map(lambda c: ord(c), file(args[0]).read())
+ # line altered following comment in blog post 1 feb 2011
+ data = map(lambda c: ord(c), file(args[0], 'rb').read())
+ if conf['erase']:
+ cmd.cmdEraseMemory()
+
+ if conf['write']:
+ cmd.writeMemory(conf['address'], data)
+
+ if conf['verify']:
+ verify = cmd.readMemory(conf['address'], len(data))
+ if(data == verify):
+ print "Verification OK"
+ else:
+ print "Verification FAILED"
+ print str(len(data)) + ' vs ' + str(len(verify))
+ for i in xrange(0, len(data)):
+ if data[i] != verify[i]:
+ print hex(i) + ': ' + hex(data[i]) + ' vs ' + hex(verify[i])
+
+ if not conf['write'] and conf['read']:
+ rdata = cmd.readMemory(conf['address'], conf['len'])
+# file(conf['fname'], 'wb').write(rdata)
+ file(args[0], 'wb').write(''.join(map(chr,rdata)))
+
+# cmd.cmdGo(addr + 0x04)
+ finally:
+ cmd.releaseChip()
+
diff --git a/spi_on_demoboard b/spi_on_demoboard
deleted file mode 160000
index 14385ed..0000000
--- a/spi_on_demoboard
+++ /dev/null
@@ -1 +0,0 @@
-Subproject commit 14385edec309dbc058838d8ad0edfc2981208e7a
--
2.43.0